Level Switches. Features and Benefits. Request Quote

Transcription

1 SEE MORE AT SORInc.com Request Quote Leve Switches SOR mechanica eve switches are rugged, industria products specificay designed for versatiity of appication. This cataog contains appication and ordering data for foat and dispaceroperated eve switches. Switches are avaiabe with fanged or seaed chambers or as insertion modes. 200 Series Options avaiabe for each type of switch incude: switch type and number, housing type, chamber materia, process connections, accessories, and more. Units may be customized to suit customers needs. Inside this cataog you wi find soutions to your eve sensing puzzes. SOR mechanica eve switches have many configurations avaiabe. If you don t see what you need, we wi engineer a soution for your appication. 100 Series 700 Series Features and Benefits Fiveyear warranty ASME Section IX and AS quaified weding system Designed to ANSI/ASME B31.1 and B31.3 guideines Hermeticay seaed switching mechanisms avaiabe Stainess stee switching mechanisms Hightemperature capabiity ide variety of exposionproof housings Versatie switching mechanisms which retrofit into other manufacturers units ordwide istings and certifications Quick wordwide deivery Ony ASTM grade materias with certified mi test reports used Safety Certified to IEC (SIL) SOR products are certified to IEC for nonredundant use in SIL1 and SIL2 Safety Instrumented Systems for most modes. For more detais or vaues appicabe to a specific product, see the Safety Integrity Leve Quick Guide (Form 1528). SORInc.com Registered Quaity System to ISO /60

2 Leve Switches 300 Top Mounted Foat 700 Series Top Mounted Dispacer 100 Series Fanged Chamber Foat 200 Series Seaed Chamber Foat 208 Steam Trap Foat 400 Series Side Mounted Foat 2/60 Registered Quaity System to ISO SORInc.com

3 Leve Switches Tabe of Contents Section Page Principes...4 Features and Benefits...6 How to Order...8 Foat Switches 100 Series Fanged Externa Cage Series Seaed Externa Cage /208 Series Steam Condensate Externa Cage Series Top Insertion Mount Series Side Insertion Mount Dispacer Switches Modes , and 802 Fanged Externa Cage Modes 740 and 804 Seaed Externa Cage Series SingeStage Top Insertion Mount Series DuaStage Top Insertion Mount Series TripeStage Top Insertion Mount Switching Mechanisms Switch Ratings Housings Accessories Compatibiity Chart Test Certificates High Temperature Seection CY and CZ Option Inspection Requirements MC and TC Options ASTM Materia Designations Reference Charts Specific Gravity of ater Conversions eights SORInc.com Registered Quaity System to ISO /60

4 Leve Switches FoatOperated Leve Switches Mode Series 100, 200 and 300 The foat rides on the process iquid surface, precisey tracking iquid surface motion. Rising iquid eve ifts the foat, siding the attraction seeve up inside the encosing tube and into the magnetic fied to actuate the eectrica or pneumatic switch (signaing iquid presence). Subsequenty, faing iquid eve owers the foat, drawing the attraction seeve out of the magnetic fied to deactuate the eectrica or pneumatic switch (signaing iquid absence). Foattype eve switches are generay abe to hande hightemperature appications, and sometimes prove usefu for cose interface detection. Foats can operate up to three switching eements. Independent switching eves may be obtained with tandem foats. Consut the factory for specia foatswitching arrangements. Actuated Switching Eement Common Normay Open Normay Cosed Pivot Bias Spring Magnet Attraction Seeve Encosing Tube Foat Leve Differentia Principes Deactuated FoatOperated Leve Switches Mode Series 108/208 and 400 The foat rides on the process iquid surface, precisey tracking iquid surface motion. Rising iquid eve ifts the foat via a pivot mechanism, siding the attraction seeve down inside the encosing tube and out of the magnetic fied to deactuate the eectrica or pneumatic switch (signaing iquid presence). Subsequenty, faing iquid eve owers the foat, drawing the attraction seeve into the magnetic fied to actuate the eectrica or pneumatic switch (signaing iquid absence). Foattype eve switches are generay abe to hande hightemperature appications. Switching Eement Actuated Magnetic Fied Engaged C Common NC Normay Cosed NO Normay Open Switching Eement Deactuated Magnetic Fied Disengaged C Common NC Normay Cosed NO Normay Open Attraction Seeve Up Counterweight Bias Spring Encosing Tube Attraction Seeve Down Bias Spring Encosing Tube Leve Differentia Actuated Deactuated 4/60 Registered Quaity System to ISO SORInc.com

5 Leve Switches Principes DispacerOperated Leve Switches Mode Series 700, 730, 740, 750 and 800 Dispacer contros offer aternative features to the foatoperated contro. The sensor is a weight (dispacer), heavier than the iquid, that is suspended by a spring. hen iquid contacts the dispacer, a buoyancy force is produced, which causes the effective weight of the dispacer to change. This causes the spring to retract sighty to a new equiibrium position. hen the spring retracts, the attraction seeve aso moves upward into the fied of the externa magnet, thus overcoming the force of the bias spring and actuating the switching eement. This principe provides for narrow or wide switching differentia, and aows switching point ateration by moving the dispacer(s) up or down the suspension cabes. Dispacers may be arranged in combinations of narrow and wide differentia to operate up to three switching stages. Dispacer contros operate under higher pressure conditions than foatoperated switches. Actuated Switching Eement Common Normay Open Normay Cosed Pivot Bias Spring Magnet Attraction Seeve Encosing Tube Extension Spring Suspension Rod / Cabe Dispacer Leve Differentia Deactuated SORInc.com Registered Quaity System to ISO /60

6 Leve Switches Features and Benefits Features and Benefits Genera Rugged carbon stee or stainess stee construction Fiveyear manufacturer s warranty Quick, wordwide deivery A ASTM materias (see page 56) Quaity management system is registered to ISO9001:2008 Safety Certified to IEC (SIL) Standard Chamber Materias A SOR eve switch chambers are constructed using ASTM grade materias with fu materia certification. Mi Test Reports are kept on fie for a raw materias. Copies are avaiabe upon request at the time of order pacement. Carbon Stee Construction Chamber Center Section Fanges/ed Fittings ed Cap Studs/Nuts Stainess Stee Construction Chamber Center Section Fanges/ed Fittings ed Cap Studs/Nuts A106 Grade B A105 A234PB A193B7/A1942H A312TP316/316L A182316/316L A403316/316L A193B7/A1942H Gaskets A standard modes are provided with a Nitrie binder composite gasket that is seected for its resistance to hydrocarbons and steam. For hightemperature, highpressure or NACEconstructed units, a spirawound gasket is used with woundaround Grafoi. Extreme highpressure mode 802 uses a softiron, ringjoint gasket on the chamber head fange. Interna Trim A sensing eements (foats and dispacers) are constructed of either 316/316LSS or porceain as a minimum. Attraction seeves are avaiabe in 400SS as a standard, with 316/316LSS or other exotic metas as an option. A other wetted interna parts are or better. Dispacer springs are made of Incone /60 Registered Quaity System to ISO SORInc.com

7 Leve Switches Features and Benefits Features and Benefits Switching Mechanisms SOR switching mechanisms are designed for use in punishing industria conditions. A stainess stee construction no auminum or brass. Temperature ratings avaiabe from 65 F ( 54 C) to 1000 F (538 C) on dry, non condensing services. Condensing service (steam) temperature ratings avaiabe up to 800 F (427 C), and up to 1200 F (649 C) with protection (see page 52). Avaiabe switching mechanisms incude hermeticay seaed, standard open contacts, or pneumatic contacts. Agency istings are avaiabe on most switch mechanisms: UL, CSA, ATEX or IECEx. Switch Housings A SOR switch housings are made from rugged castings. Materias are copperfree auminum or cast iron. A wide range of exposionproof ratings and agency istings are avaiabe. Quaity Assurance SOR maintains a high eve of quaity throughout our corporation. Many quaity assurance features are buit into our products. ISO 9001 certified engineering design and production system (certified since 1993). Leveweded chambers designed to the guideines of ASME B31.1 and B31.3 (inspection certificate avaiabe see page 54). A weders and wed procedures are quaified and maintained to ASME Section IX. A ASTM grade materias used Certified Mi Test Reports required on a raw materias. Safety Certified to IEC (SIL) SOR products are certified to IEC for nonredundant use in SIL1 and SIL2 Safety Instrumented Systems for most modes. For more detais or vaues appicabe to a specific product, see the Safety Integrity Leve Quick Guide (Form 1528). Product Support SOR has a futime engineering staff dedicated to soving your mechanica eve switch probems. Engineers and technicians are knowedgeabe about saes and production techniques, and are dedicated to providing the best soution to our customers at the best price. SORInc.com Registered Quaity System to ISO /60

8 Leve Switches How to Order Mode Number System 101 AA1CBA1N4CRTT Mode Series Chamber Materia Process Connection Interna Switch Housing Accessories Trim Mechanism Materia The eve switch mode number is divided into seven sections that individuay specify the components of an SOR eve switch. This diagram iustrates the mode number arrangement. Seect the component designators from the appropriate pages of this brochure. Standard components and ratings are highighted throughout the brochure for ease of use. Each section incudes a vaid mode number at the top of each isting of component designators. The position of the designator isted beow it wi be shown in coor for reference. How to Order Steps 1 through 5 are required; Step 6 is optiona. Orders must have compete mode numbers, i.e. each component must have a designator. Step 1: Seect Mode Series based on maximum working pressure and minimum specific gravity. Step 2: Seect Chamber Materia. Step 3: Seect Process Connection. Step 4: Seect Trim Materia. Step 5: Seect Switch Mechanism & Housing. (Pages 44 through 48). Step 6: Seect Accessories as required for service. (Page 49). Page Numbers for Seected Steps Step 100 Series 200 Series 108/208 Series 300 Series 400 Series , 802 Series 740 and 804 Series 700 Series 730 Series 750 Series Design and specifications are subject to change without notice. For atest revision, see 8/60 Registered Quaity System to ISO SORInc.com

9 100 Series Step 1: Mode Series 101 AA1CBA1N4CRTT The 100 Series mechanica iquid eve switch is foat operated with a fanged, serviceabe externa chamber. Seect the sensing unit from the foowing charts. Then refer to pages 44 through 50 for switching eements, housings and accessories. Seect a mode series from the charts beow based on maximum operating pressure and minimum specific gravity. Maximum orking Pressure See page 53 for pressure ratings at higher temperatures. Mode Series Chamber Materia Pressure at Listed Temperature in psid (bar)* 100 F (38 C) 200 F (93 C) 300 F (149 C) 350 F (177 C) 400 F (204 C) 450 F (232 C) (19.7) (18.9) (17.9) (16.2) (15.9) (14.8) (14.8) (14.1) (13.8) (13.4) (12.8) (12.6) (34.5) (34.5) (34.5) (34.5) (34.5) (34.5) (33.5) (33.5) (32.6) (32.6) (31.7) (31.7) (51.0) (49.7) (46.6) (42.8) (45.2) (38.6) (44.5) (37.0) (43.8) (35.5) (42.9) (34.3) (68.2) (69.0) (62.0) (69.0) (60.3) (69.0) (59.2) (67.1) (58.2) (65.2) (56.6) (63.4) (19.7) (18.9) (17.9) (16.2) (15.9) (14.8) (14.8) (14.1) (13.8) (13.4) (12.8) (12.6) (19.7) (18.9) (17.9) (16.2) (15.9) (14.8) (14.8) (14.1) (13.8) (13.4) (12.8) (12.6) (24.1) (24.1) (24.1) (24.1) (24.1) (24.1) (23.4) (23.4) (22.8) (22.8) (22.2) (22.2) (51.0) (49.7) (46.6) (42.8) (45.2) (38.6) (44.5) (37.0) (43.8) (35.5) (42.9) (34.3) (86.2) (86.2) (86.2) (86.2) (86.2) (77.2) (83.9) (74.1) (81.5) (71.0) (79.3) (68.2) *Consut the factory for pressure ratings of units with Mone trim. Minimum Specific Gravity For Mone Trim pease consut factory. Mode Series / 400SS B Trim Minimum Specific Gravity (Dua Switch, antivibration, pneumatic or extrahigh temperature) (0.64) (0.73) (0.57) (0.68) (0.41) (0.87) (0.87) Standard A C Trim (0.67) (0.77) (0.59) (0.70) (0.42) (0.94) (0.94) / 400SS B Trim w/ ET or FE Option (0.67) (0.76) (0.59) (0.70) (0.42) (0.93) (0.94) A C Trim (0.71) (0.80) (0.61) (0.72) (0.43) (1.01) (1.01) SORInc.com Registered Quaity System to ISO /60

10 100 Series Step 2: Chamber Materia 101 AA1CBA1N4CRTT Seect chamber materia from the foowing chart. Maximum working pressure in the chart on page 9 is based on the materia seected here. Consut the factory for aternative materias. Designator A C Materia A106 Grade B Carbon Stee with A105 and A234PB fittings A312TP316/316L Stainess Stee with A182316/316L and A403316/316L fittings Step 3: Process Connection 101 AA1CBA1N4CRTT Seect a process connection size, stye and designator from the chart beow. Consut the factory for variations. Fanged process connections may reduce the maximum working pressure of the unit. Size Stye NPT Thread Socket ed Fange 150# 300# 600# VH (Vertica/Horizonta) VV (Vertica/Vertica) VH A1A A1B A1C A1D A1E 1 VV B1C B1D B1E VVD C1A C1B C1C C1D C1E VVT D1C D1D D1E 11/2 VH A5A A5B A5C A5D A5E VV B5C B5D B5E VVD C5A C5B C5C C5D C5E VVD (Vertica/Vertica/ Drain) VVT (Vertica/Vertica/ Tee Drain) VVT D5C D5D D5E VH A2A* A2B* A2C A2D A2E 2 VV B2C B2D B2E VVD C2A* C2B* C2C C2D C2E VVT D2C D2D D2E *Not avaiabe on Modes 121 and 122. Seect the interna trim materia from the chart beow. Consut the factory for pressure ratings on Mone trim. Designator Foat Materia Attraction Seeve Step 4: Trim Materia 101 AA1CBA1N4CRTT Avaiabe with Chamber Materia: B 316/316L Stainess Stee 400 Stainess Stee A106 Carbon Stee (A) ony C 316/316L Stainess Stee 316/316L Stainess Stee M Mone 400 Mone 400 A106 Carbon Stee (A) or 316/316L Stainess Stee (C) A106 Carbon Stee (A) or 316/316L Stainess Stee (C) 10/60 Registered Quaity System to ISO SORInc.com

11 100 Series Caibration Dimensions The charts beow provide typica standard Set Points. As the specific gravity used on a eve switch changes, the Set Points wi aso change. These vaues are based on the specific gravity isted and units with B trim and an A1 switch. For other materias or switches, pease consut factory. If a specific Set Point is needed, pease use the SC option found in the accessories section of this cataog. Specific Gravity Mode 101 B C.52 31/4 47/ /4 515/16 Specific Gravity Mode 102 B C.62 23/4 313/ /16 51/8 Specific Gravity Mode 103 B C.51 31/4 37/ /16 53/16 Specific Gravity Mode 104 B C.62 33/8 315/ /8 5 Specific Gravity Mode 109 B C.38 43/4 515/ /4 79/16 Specific Gravity Mode 121 B C /16 41/ /16 413/16 Specific Gravity Mode 122 B C.66 21/2 315/ /8 45/8 Specific Gravity Mode 123 B C.93 27/8 313/ /16 41/16 Specific Gravity Mode 124 B C.94 27/8 313/ /8 4 SORInc.com Registered Quaity System to ISO /60

12 THIS DRA NO USE HA HEREON, NOR MADE ITHOU 100 Series Chamber Dimensions Dimensions isted are for reference ony and are expressed as miimeters over inches. (Linear = mm/in.) MODEL # They are subject to change without notice. Contact PURCHASE SOR ORDER for # certified drawings of particuar modes or if specia dimensions are required. DRAING NU SALES ORDER * MINIMUM 5.7 REQUIRED TO * * L L 14 ISO9001 D H G PRODUCT CER ALL DIMEN UNLESS OT LIN E F 1" S (VVT ONLY) F TITLE DIM DG 100 S EXTERNAL CHAM EO NUMBER: 5 SCALE: DRAIN Drawing Mode Name: MODEL NAME.DRAFT/3/0+ Drawing DRAING DO NOT NUMBE SCALE MODEL # SALES ORDER # PURCHASE ORDER # Reset Form Housing** Genera Purpose Exposion Proof Exposion Proof Exposion Proof N4 N7 B1 B2 1 NPT Pneumatic P1 (3) 1/4 NPT ATEX Fame Proof/IS IECEx Fame Proof T6 S3 w/cl S3 S8 M20 x 1.5*** L * * MINIMUM 5.75 REQUIRED TO RE ISO PRODUCT CERTIF ALL DIMENSIO UNLESS OTHE LINEA * Minimum 53/4 (146 mm) overhead cearance required to remove housing cover. ** See Housing section (page 48). *** M20 adapters are brass. Contact the factory for aternate materias. DRAIN CONN 1"NPT OR S E F I TITLE THIS DRAIN NO USE HATSO HEREON, NOR RE MADE ITHOUT T DIM DG 100 SER EXTERNAL CHAMB EO NUMBER: 5090 SCALE: DRAING Note: A process fange nippes are 1 standard. Mode Name: MODEL NAME.DRAFT/3/0+ Drawing DO NOT SCALE PRINT 12/60 Registered Quaity System to ISO SORInc.com

13 100 Series Chamber Dimensions 1 Connection Mode 11/2 Connection 2 Connection D 1, 2 E 1, 2 F 4 G H 4 I 2 L 2 inch mm inch mm inch mm inch mm inch mm inch mm inch mm / / / / / / / / / / / / / / / / / / / / / / / / / /4 476 Mode D 1, 2 E 1, 2 F 4 G H 4 I 2 L 2 inch mm inch mm inch mm inch mm inch mm inch mm inch mm / / / / / / / / / / / / / / / / / / / / / / / /4 476 Mode D 1, 2 E 1, 2 F 4 G H 4 I 2, 3 L 2, 3 inch mm inch mm inch mm inch mm inch mm inch mm inch mm / / / / / / / / / / / / / / / / / / / / / / / / /4 502 Notes 1. Dimensions D and E appy to socketwed connections ony. Consut factory for NPT dimensions. 2. Consut factory for dimensions for materias other than carbon stee. 3. Appies to socket wed or NPT process connections ony. 4. Consut the factory if wed neck process fanges are required. Dimensions may vary from those shown above. 5. Appies to fanged process connections ony. SORInc.com Registered Quaity System to ISO /60

14 200 Series Step 1: Mode Series 201 AA1CBA1N4CRTT The 200 Series mechanica eve switch is foat operated with a seaed, tamperproof externa chamber. Seect the sensing unit from the foowing charts. Then refer to pages for switching eements, housings and accessories. Seect a mode series from the charts beow based on maximum operating pressure and minimum specific gravity. Mode Maximum Series Materia orking Pressure See page 53 for pressure ratings at higher temperatures Chamber Pressure at Listed Temperature in psig (bar)* 100 F (38 C) 200 F (93 C) 300 F (149 C) 350 F (177 C) 400 F (204 C) 450 F (232 C) 225 (15.5) 225 (15.5) 225 (15.5) 219 (15.1) 213 (14.7) 207 (14.3) 300 (20.7) 300 (20.7) 300 (20.7) 292 (20.1) 284 (19.5) 276 (19.0) 500 (34.5) 500 (34.5) 500 (34.5) 486 (33.5) 473 (32.6) 460 (31.7) 1250 (86.2) 1250 (86.2) (86.2) (81.9) *Consut the factory for pressure ratings of units with Mone trim (83.9) (78.6) (81.5) (75.2) (79.3) (72.6) 750 (51.7) 750 (51.7) 750 (51.7) 729 (50.3) 709 (48.9) 690 (47.6) 1000 (68.9) 1000 (68.9) 1000 (68.9) 1000 (68.9) (68.9) (65.2) (68.9) (65.2) (67.1) (62.6) (67.1) (62.6) (65.2) (59.9) (65.2) (59.9) (63.4) (57.8 (63.4) ( (31.0) 450 (31.0) 450 (31.0) 438 (30.2) 426 (29.4) 414 (28.6) 350 (24.1) 350 (24.1) 350 (24.1) 340 (23.4) 331 (22.8) 322 (22.2) Minimum Specific Gravity For Mone Trim pease consut factory. Mode Series Minimum Specific Gravity (Dua Switch, antivibration, pneumatic or extrahigh temperature) / 400SS B Trim (0.44) (0.63) (0.72) (0.56) (0.75) (0.67) (0.41) (0.86) Standard A C Trim (0.46) (0.67) (0.76) (0.58) (0.79) (0.69) (0.42) (0.93) / 400SS B Trim w/ ET or FE Option (0.44) (0.66) (0.75) (0.58) (0.79) (0.69) (0.42) (0.92) A C Trim (0.48) (0.70) (0.79) (0.60) (0.82) (0.71) (0.43) (0.99) 14/60 Registered Quaity System to ISO SORInc.com

15 200 Series Step 2: Chamber Materia 201 AA1CBA1N4CRTT Seect chamber materia from the foowing chart. Maximum working pressure in the chart on this page is based on the materia seected here. Consut the factory for aternative materias. Designator A C Materia A106 Grade B Carbon Stee with A105 and A234PB fittings A312TP316/316L Stainess Stee with A182316/316L and A403316/316L fittings Step 3: Process Connection 201 AA1CBA1N4CRTT Seect a process connection, size, stye and rating from the chart beow. Consut the factory for variations. Fanged process connections may reduce the maximum working pressure of the unit. Size Stye NPT Thread Socket ed Fange 150# 300# 600# VH A1A A1B A1C A1D A1E VH (Vertica/Horizonta) VV (Vertica/Vertica) 1 VV B1C B1D B1E VVD C1A C1B C1C C1D C1E VVT D1C D1D D1E VH A5A A5B A5C A5D A5E 11/2 VV B5C B5D B5E VVD C5A C5B C5C C5D C5E VVT D5C D5D D5E VVD (Vertica/Vertica/ Drain) VVT (Vertica/Vertica/ Tee Drain) VH A2A* A2B* A2C A2D A2E 2 VV B2C B2D B2E VVD C2A* C2B* C2C C2D C2E VVT D2C D2D D2E *Not avaiabe on Mode 221. Step 4: Trim Materia 201 AA1CBA1N4CRTT Seect the interna trim materia from the chart beow. Consut the factory for pressure ratings on Mone trim. Designator Foat Materia Attraction Seeve Avaiabe with Chamber Materia: B 316/316L Stainess Stee 400 Stainess Stee A106 Carbon Stee (A) ony C 316/316L Stainess Stee 316/316L Stainess Stee M Mone 400 Mone 400 A106 Carbon Stee (A) or 316/316L Stainess Stee (C) A106 Carbon Stee (A) or 316/316L Stainess Stee (C) SORInc.com Registered Quaity System to ISO /60

16 200 Series Caibration Dimensions The charts beow provide typica standard Set Points. As the specific gravity used on a eve switch changes, the Set Points wi aso change. These vaues are based on the specific gravity isted and units with B trim and an A1 switch. For other materias or switches, pease consut factory. If a specific Set Point is needed, pease use the SC option found in the accessories section of this cataog. High Leve Low Leve Mode 201 Specific Gravity B C.38 33/ /16 59/16 Mode 204 Specific Gravity B C / /8 41/4 Mode 207 Specific Gravity B C / /16 45/8 Mode 202 Specific Gravity B C.52 31/4 47/ /4 516/16 Mode 205 Specific Gravity B C / /16 5 Mode 209 Specific Gravity B C.38 43/4 51/ /4 71/2 Mode 203 Specific Gravity B C / /4 57/16 Mode 206 Specific Gravity B C.65 31/2 41/ /8 51/16 Mode 221 Specific Gravity B C.64 29/16 41/ /16 413/16 Chamber Dimensions DRAING NUMBER Dimensions isted are for reference ony and are expressed as miimeters over inches. (Linear = mm/in.) They are subject to change without notice. Contact MODEL SOR # for certified drawings of particuar modes or if specia SALES ORDER # dimensions are required. E F Housing** Genera Purpose Exposion Proof Exposion Proof Exposion Proof N4 N7 B1 B2 1 NPT Pneumatic P1 (3) 1/4 NPT ATEX Fame Proof/IS IECEx Fame Proof L D H * Drawing T6 S3 w/cl S3 S PURCHASE ORDER # 1" S (VVT ONLY) Mode Name: MODEL NAME.DRAFT/1/4+ M20 x 1.5*** F L G * Drawing TITLE DIM DG 200 SERIES SEALED CHAMBER VV, VVT DRAING NUMBER I REV EO NUMBER: SCALE: DRAING SCALE DG SIZE SHEET 1 OF 1 DO NOT SCALE PRINT A DRAIN CONN E 1"NPT OR S Reset Form F Note: A process fange nippes are 1 standard. LINE ITEM # * MINIMUM OVERHEAD CLEARANCE 5.75 REQUIRED TO REMOVE HOUSING COVER * L TH ST LENEXA, KS USA ISO9001 SORINC.COM DRAN BY M SMITH PRODUCT CERTIFICATION DRAING CHECKED BY ALL DIMENSIONS ARE ±1/16 IN J REHM UNLESS OTHERISE SPECIFIED ENGINEER APPROVAL MM LINEAR = IN J FIFE DATE /15/ THIS DRAING IS THE EXCLUSIVE PROPERTY OF SOR. NO USE HATSOEVER OF THE INFORMATION CONTAINED HEREON, NOR REPRODUCTION IN HOLE OR PART MAY BE MADE ITHOUT THE EXPRESS RITTEN PERMISSION OF SOR. Drawing * Minimum 53/4 (146 mm) overhead cearance required to remove housing cover. (Linear = mm/in.) ** See Housing section (page 48). *** M20 adapters are brass. Contact the factory for aternate materias THIS DRAING AS CREATED U THE VERTICAL_MOUNT_ASSY AN FILE txt LOCATED ON K:\$Engineering Services\Concept THEN THE DRAING AS CHAN DRAFT ENTITIES. 16/60 Registered Quaity System to ISO SORInc.com

17 200 Series Chamber Dimensions 1 Connections Mode D 1, 2 E 1, 2 F 4 G H 4 I 1, 2 L 2 inch mm inch mm inch mm inch mm inch mm inch mm inch mm / / / / / / / / / / /4 125/ /16 513/ /16 87/ /16 71/ /16 181/ / / / /2 Connections Mode D 2 E 2 F 4 G H 4 I 2 L 2 inch mm inch mm inch mm inch mm inch mm inch mm inch mm / / / / / / / / / /4 131/ /16 61/ /16 87/ /16 71/ /16 181/ / / / Connections Mode D 2 E 2 F 4 G H 4 I 2, 3 L 2, 3 inch mm inch mm inch mm inch mm inch mm inch mm inch mm / / / / / / / / / / /4 133/ /8 63/ /16 87/ /16 71/ /16 191/ / /8 365 Notes 1. Dimensions D and E appy to socketwed connections ony. Consut factory for NPT dimensions. 2. Consut factory for dimensions for materias other than carbon stee. 3. Appies to socket wed or NPT process connections ony. 4. Consut the factory if wed neck process fanges are required. Dimensions may vary from those shown above. 5. Appies to fanged process connections ony. SORInc.com Registered Quaity System to ISO /60

18 108/208 Series Step 1: Mode Series 108 AE1AFA1N4CRTT The 108/208 Series mechanica eve switches are foat operated, horizonta mounted with seaed, tamperproof or fanged, serviceabe chambers. Seect the sensing unit from the foowing charts. Then refer to pages for switching eements, housings and accessories. Seect a mode series from the charts beow based on maximum operating pressure and minimum specific gravity. See page 53 for pressure ratings at higher temperatures. Mode Series Chamber Materia Pressure at Listed Temperature in psid (bar) 100 F (38 C) 200 F (93 C) 300 F (149 C) 350 F (177 C) 400 F (204 C) 450 F (232 C) (51.0) (49.6) (46.5) (42.7) (45.1) (38.6) (44.4) (37.0) (43.7) (35.5) (42.8) (34.2) (123.6) (155.0) (123.6) (133.5) (123.6) (120.3) (123.6) (133.4) (128.0) (110.4) (128.0) (106.7) Minimum Specific Gravity For a mode series on this page, singe switch ony is equa to.65. Consut the factory for units used with specific gravity ower than.65. Step 2: Chamber Materia 108 AE1AFA1N4CRTT Seect chamber materia from the foowing chart. Maximum working pressure in the chart above is based on the materia seected here. Consut the factory for aternative materias. Designator A C Materia A106 Grade B Carbon Stee with A105 and A234PB fittings A312TP316/316L Stainess Stee with A182316/316L and A403316/316L fittings Seect a process connection stye and size from the chart beow. Consut the factory for variations. NPT connections not recommended above 900 F. Size Stye NPT Thread E1A E1B E5A E5B E2A E2B 1 11/2 2 NPT S NPT S NPT S Step 3: Process Connection 108 AE1AFA1N4CRTT Seect the interna trim materia from the chart beow. Step 4: Trim Materia 108 AE1AFA1N4CRTT Designator Foat Materia Attraction Seeve Avaiabe with Chamber Materia: F 321 Stainess Stee 400 Stainess Stee A106 Carbon Stee (A) ony G 321 Stainess Stee 316/316L Stainess Stee A106 Carbon Stee (A) or 316/316L Stainess Stee (C) 18/60 Registered Quaity System to ISO SORInc.com

19 108/208 Series Chamber Dimensions Dimensions isted are for reference ony and are expressed as miimeters over inches. (Linear = mm/in.) They are subject to change without notice. Contact SOR for certified drawings of particuar modes or if specia dimensions are required * Mode 108 * Mode 208 B A C B 1 Connections A Drawing * Minimum 53/4 (146 mm) overhead cearance required to remove housing cover. ** See Housing section (page 48). *** M20 adapters are brass. Contact the factory for aternate materias. C Drawing Housing** Genera Purpose Exposion Proof Exposion Proof Exposion Proof N4 N7 B1 B2 1 NPT Pneumatic P1 (3) 1/4 NPT ATEX Fame Proof/IS IECEx Fame Proof T6 S3 Reset w/cl Form M20 x 1.5*** S3 S8 Mode A B C inch mm inch mm inch mm / / / / / / /2 Connections Mode A 1 B 1 C 1 inch mm inch mm inch mm / / / / / / Connections Mode A 1 B 1 C 1 inch mm inch mm inch mm / / / / / /8 409 Notes 1. Dimensions vaid for socket wed process connections. Consut factory for threaded connection dimensions. SORInc.com Registered Quaity System to ISO /60

20 300 Series Step 1: Mode Series 301 AF1ABA1N4CRTT The 300 series mechanica eve switches are foatoperated switches suitabe for topinsertion mounting. Seect the sensing unit from the foowing charts. Then refer to pages for switching eements, housings and accessories. Seect a mode series from the charts beow based on maximum operating pressure and minimum specific gravity. Mode Series Pressure at Listed Temperature in psid (bar)* 100 F (38 C) 200 F (93 C) 300 F (149 C) 350 F (177 C) 400 F (204 C) 450 F (232 C) (15.5) 225 (15.5) 225 (15.5) 219 (15.1) 213 (14.6) 207 (14.2) (34.4) 500 (34.4) 500 (34.4) 486 (33.5) 473 (32.6) 460 (31.7) (51.7) 750 (51.7) 750 (51.7) 729 (50.2) 709 (48.8) 690 (47.5) *Consut the factory for pressure ratings of units with Mone trim. Minimum Specific Gravity Minimum specific gravity wi be ower for shorter insertion depths. Consut the factory. Mode Series Insertion Depth* Minimum Specific Gravity Singe Switch (Dua Switch, antivibration, pneumatic or extrahigh temperature) / 400SS Trim (B) (.45) (.49) (.79) (.87) (.58) (.62) A Trim (C) (.48) (.52) (.84) (.91) (.61) (.65) A Mone Trim (M) (.54) (.59) (.93) (1.02) (.68) (.73) *Insertion depth is defined as the approximate vaue of a rising eve setpoint at a Specific Gravity of 1.0. If more precise setpoint action is required, pease seect the SC option from the accessories section of the cataog. Pease note: An insertion depth or SC information must be suppied at the time of order on a 300 series switches. Seect process connection materia from the foowing chart. Step 2: Process Connection Materia 301 AF1ABA1N4CRTT Designator A C Materia A106 Carbon Stee A182TP316/316L Stainess Stee 20/60 Registered Quaity System to ISO SORInc.com

21 300 Series Step 3: Process Connection 301 AF1ABA1N4CRTT Seect a process connection, size and designator from the chart beow. Consut the factory for variations. Fanged process connections may reduce the maximum working pressure of the unit. Size NPT Thread Seect Designator Fange 150# 300# 600# 1 F1A 2 F2A 3 F3A F3C F3D F3E 4 F4C F4D F4E 6 F6C F6D F6E NPT Mounting Fange Mounting Note: It is important to consider the instaation configuration when seecting the process connection. Be sure that the foat wi fit through the process connection, or that the vesse has access to attach the foat from inside the vesse after instrument instaation. See page 22 for foat dimensions. Step 4: Trim Materia 301 AF1ABA1N4CRTT Seect the interna trim materia from the chart beow. Consut the factory for pressure ratings on Mone trim. Designator Foat Materia Attraction Seeve Avaiabe with Chamber Materia: B 316/316L Stainess Stee 400 Stainess Stee A106 Carbon Stee (A) ony C 316/316L Stainess Stee 316/316L Stainess Stee M Mone 400 Mone 400 A106 Carbon Stee (A) or 316/316L Stainess Stee (C) A106 Carbon Stee (A) or 316/316L Stainess Stee (C) SORInc.com Registered Quaity System to ISO /60

22 300 Series Unit Dimensions Dimensions in this cataog are for reference ony. They may be changed without notice. Contact the factory for certified drawings for a particuar mode number. Dimensions are expressed as miimeters over inches. (Linear = mm/in.) Standard Units MODEL # SALES ORDER # LINE ITEM # PURCHASE ORDER # MODEL 301/ Tandem Foat MODEL Units MODEL FLOAT SIZ X * OVERHEAD CLEARAN 5.75 REQUIRED TO REMOVE C C PROCESS CONNECTION FLANGE B PROCESS CONNECTION FLANGE D PROCESS CONNECTION FLANGE D HIGH INSERTION DEPTH "A" : _ LO INSERTION DEPTH "B" : _ PROCESS CONNECTION 1 NPT(M) A UPPER FLOAT A UPPER FLOAT DIFFERENTIAL "C" : FLANGE "D" : ELECTRICAL CONN. "" : B B FLOAT FLOAT ISO TH S 91 SO Drawing G, FUNCTION. E PIPE ** See Housing section (page 48). ***M20 adapters are brass. Mode Name: _OPT.ASSEM//0 Contact the factory for aternate materias. Housing** Genera Purpose Exposion Proof Exposion Proof Exposion Proof N4 N7 B1 B2 1 NPT Pneumatic P1 (3) 1/4 NPT ATEX Fame Proof/IS IECEx Fame Proof T6 S3 w/cl S3 S8 Drawing NCTION. IPE M20 x 1.5*** Series Foat Size Standard Units Minimum Insertion /2 x / C LOER FLOAT NOTE: 1. FLOAT SIZE IS BASED ON MINIMUM DIFFERENTIAL SETTING, MINIMUM LIQUID SPECIFIC GRAVITY, AND SINGLE SITCH FUNCTION. Minimum 53/4 (146 mm) overhead cearance required to remove housing cover CAUTION MUST BE USED IN SELECTING MOUNTING NOZZLE PIPE SCHEDULE TO PROVIDE FLOAT INSERTION CLEARANCE. Maximum Insertion mm inch mm inch 51/ /4 C LOER FLOAT Drawing PRODUCT CERTIFICATION DRA ALL DIMENSIONS ARE ±1/1 UNLESS OTHERISE SPECIF MM LINEAR = IN THIS DRAING IS THE EXCLUSI NO USE HATSOEVER OF THE INF HEREON, NOR REPRODUCTION IN MADE ITHOUT THE EXPRESS RIT TITLE DIM DG 300 SERIES FLANGED (FLOAT OPERATED) DRAING EO NUMBER: 5195 SCALE: 0.20 SH DO NOT SCALE PRINT Series Foat Size Tandem Foat Units High Insertion Low Insertion Differentia Minimum Maximum Minimum Maximum Minimum Maximum mm inch mm inch mm inch mm inch mm inch mm inch /2 x / / / / /4 304 Notes 1. Standard Units: It is important to consider the instaation configuration when seecting the process connection. Be sure that the foat wi fit through the process connection, or that the vesse has access to attach the foat from inside the vesse after instrument instaation. 2. Tandem Foat Units: It is important to consider the instaation configuration when seecting the process connection. Be sure that the foat wi fit through the process connection. Tandem foats are not removabe and must be instaed through the nozze opening. Operating specific gravity and insertion depths must be specified. 22/60 Registered Quaity System to ISO SORInc.com

23 400 Series Step 1: Mode Series 401 AG3ABA1N4CRTT The 400 Series mechanica eve switch is foat operated suitabe for horizontainsertion mounting. Seect the sensing unit from the foowing charts. Then refer to pages for switching eements, housings and accessories. Seect a mode series from the charts beow based on maximum operating pressure and minimum specific gravity. Maximum orking Pressure Mode Series Chamber Materia Pressure at Listed Temperature in psig (bar)* 100 F (38 C) 200 F (93 C) 300 F (149 C) 350 F (177 C) 400 F (204 C) 450 F (232 C) 230 (15.8) 230 (15.8) 230 (15.8) 224 (15.4) 218 (15.0) 212 (14.6) 350 (24.1) 350 (24.1) 350 (24.1) 340 (23.4) 331 (22.8) 322 (22.2) 230 (15.8) 230 (15.8) (15.8) (14.8) (14.8) (14.1) (13.7) (13.4) (12.7) (12.5) 500 (34.4) 500 (34.4) 500 (34.4) 486 (33.5) 473 (32.6) 460 (31.7) (51.0) (49.6) 1250 (86.2) (46.5) (42.7) (86.2) (85.5) (46.1) (38.6) (86.2) (77.2) (44.4) (37.0) (83.8) (74.1) (43.7) (35.5) (81.5) (71.0) (42.6) (34.2) (79.3) (68.4) *Consut the factory for pressure ratings of units with Mone trim Minimum Specific Gravity Mode Singe Switch Note: Insertion depth may affect minimum specific gravity. Step 2: Chamber Materia 401 AG3ABA1N4CRTT Seect chamber materia from the foowing chart. Maximum working pressure in the chart above is based on the materia seected here. Consut the factory for aternative materias. Designator A C Materia A106 Grade B Carbon Stee with A105 and A234PB fittings A312TP316/316L Stainess Stee with A182316/316L and A403316/316L fittings SORInc.com Registered Quaity System to ISO /60

24 TITLE DO NOT SCALE PRINT DRAING NUMBER DRAN BY CHECKED BY ENGINEER APPROVAL DATE REV DG SIZE 400 Series Step 3: Process Connection 401 AG3ABA1N4CRTT Seect a process connection designator from the chart beow based on stye and size. Consut the factory for variations. 3 fanged process connections may require the foat to be instaed from inside the process connection. Mode Foat Size Connection Designator Size Stye G3A /2 G7A 21/ G3F G4F x 6 G3A 3 NPT(M) Thread NPT(M) Thread 150# RF ed Neck Fange 150# RF ed Neck Fange NPT(M) Thread Mode Step 4: Trim Materia 401 AG3ABA1N4CRTT Seect the interna trim materia from the chart beow. Consut the factory for pressure ratings on Mone trim. Designator Foat Materia Attraction Seeve Foat Size Connection Designator Size Stye x 6 G3G x 6 G4G x 6 G3H x 6 G4H 4 Avaiabe with Chamber Materia: 300# RF ed Neck Fange 300# RF ed Neck Fange 600# RF ed Neck Fange 600# RF ed Neck Fange B 316/316L Stainess Stee 400 Stainess Stee A106 Carbon Stee (A) ony C 316/316L Stainess Stee 316/316L Stainess Stee M Mone 400 Mone 400 A106 Carbon Stee (A) or 316/316L Stainess Stee (C) A106 Carbon Stee (A) or 316/316L Stainess Stee (C) Chamber Dimensions Dimensions in this cataog are for reference ony. They may be changed without notice. Contact the factory for certified drawings for a particuar mode number. Dimensions are expressed as miimeters over inches. (Linear = mm/in.) Housing** Modes 401, 402, 404 Drawing Modes 403, 405, 406 * Drawing Genera Purpose Exposion Proof Exposion Proof Exposion Proof Pneumatic MODEL # SALES ORDER # LINE ITEM # PURCHASE ORDER # N MAXIMUM DIFFERENTIAL (D) FLANGED T6 NOZZLE LENGTH (N) 7.12 UNITS ATEX MODEL 4.00 S Fame Proof/IS M20 x IECEx Fame Proof N4 N7 B1 B2 P1 w/cl 405** S3 406** S **BASED ON 4" FLANGE SIZE 1 NPT (3) 1/4 NPT 1.5*** CUSTOMER PROCESS CONNECTION STANDARD DIFFERENTIAL (D) MODEL MIN. S.G. * Minimum overhead cearance required to remove 5.75 housing cover. ** See Housing section (page 48). *** M20 adapters are brass. Contact the factory for aternate materias PROCESS CONNECTION ELD NECK FLANGE FLOAT D TH ST LENEXA, KS USA ISO9001 SORINC.COM PRODUCT CERTIFICATION DRAING ALL DIMENSIONS ARE ±1/16 IN UNLESS OTHERISE SPECIFIED MM LINEAR = IN K MITCHELL J REHM J FIFE 08 APR 2011 THIS DRAING IS THE EXCLUSIVE PROPERTY OF SOR. NO USE HATSOEVER OF THE INFORMATION CONTAINED HEREON, NOR REPRODUCTION IN HOLE OR PART MAY BE MADE ITHOUT THE EXPRESS RITTEN PERMISSION OF SOR * MINIMUM OVERHEAD CLEARANCE /60 REQUIRED TO REMOVE HOUSING COVER. Registered Quaity System to ISO ELECTRICAL CONN. "" : SORInc.com STANDARD Form DIFFERENTIAL. 912 FOR MAXIMUM (01.15) DIFFERENTIAL, SOR SEE TABLE. Inc Mode Name: ASSEM/1/5+ NOTES: DIM DG 403,405,406 FLOAT OPERATED EO NUMBER: 5090 SCALE: SHEET 1 OF 1 B Reset Form

25 400 Series Caibration Dimensions Standard Differentia (D) Mode Minimum Specific Gravity (76 mm) /4 (70 mm) 406 Note: ith antivibration, extrahigh temperature and pneumatic switch, minimum differentia wi increase. Maximum Differentia (D) Differentia Dimension D is caibrated to the minimum shown above as standard. ider differentias are avaiabe by pacing an SC in the accessory section of the mode number. The charts beow give the maximum differentias avaiabe. NPT Units Mode Customer Mounting 1/2 Couping Fu Couping /8 (356 mm) 101/4 (292 mm) /8 (292 mm) 87/8 (292 mm) /8 (356 mm) 101/4 (292 mm) Fanged Units Customer Nozze Length (N) Mode 2 (51 mm) 4 (102 mm) 6 (152 mm) 8 (203 mm) 10 (254 mm) (330 mm) 9 (229 mm) 7 (178 mm) 5 (127 mm) 41/2 (114 mm) 405* 6 (152 mm) 5 (127 mm) 406* *Based on 4inch fange size. SORInc.com Registered Quaity System to ISO /60

26 and 802 Series Step 1: Mode Series 741 AA1C BA1N4CRTT The and 802 Series mechanica eve switches are dispaceroperated with fanged, serviceabe externa chambers. Seect the sensing unit from the foowing charts. Then refer to pages for switching eements, housings and accessories. Seect a mode series from the charts beow based on maximum operating pressure and minimum specific gravity. Maximum orking Pressure Mode Series Chamber Materia Pressure at Listed Temperature in psig (bar)* 100 F (38 C) 200 F (93 C) 300 F (149 C) 350 F (177 C) 400 F (204 C) 450 F (232 C) (19.7) (18.9) (17.4) (16.5) (15.8) (14.8) (14.8) (14.1) (13.7) (13.4) (12.7) (12.5) (51.0) (49.6) (46.9) (42.7) (45.1) (38.6) (44.4) (37.0) (43.7) (35.5) (42.6) (34.2) (102.0) (99.3) (89.2) (85.5) (80.4) (77.2) (77.1) (74.1) (73.8) (70.7) (71.3) (68.3) (232.8) (248.2) (232.8) (213.4) (225.5) (192.7) (222.0) (185.0) (218.6) (177.2) (213.2) (171.0) *Consut the factory for pressure ratings of units with Mone trim. Standard dispacer units are not avaiabe above 450 F (232 C). Minimum Specific Gravity Mode Series Standard AntiVibration or Pneumatic Step 2: Chamber Materia 741 AA1CBA1N4CRTT Seect chamber materia from the foowing chart. Maximum working pressure in the chart above is based on the materia seected here. Consut the factory for aternate materias. Designator A C Materia A106 Grade B Carbon Stee with A105 and A234PB fittings A312TP316/316L Stainess Stee with A182316/316L and A403316/316L fittings 26/60 Registered Quaity System to ISO SORInc.com

27 and 802 Series Step 3: Process Connection 741 AA1CBA1N4CRTT Seect a process connection size, stye and designator from the chart beow. Consut the factory for variations. Fanged process connections may reduce the maximum working pressure of the unit. Size Stye NPT Thread Socket ed 150# RF 300# RF Fange 600# RF 1500# RTJ VH A1A A1B A1C A1D A1E A1T VH (Vertica/Horizonta) VV (Vertica/Vertica) 1 VV B1C B1D B1E B1T VVD C1A C1B C1C C1D C1E C1T VVT D1C D1D D1E D1T VH A5A A5B A5C A5D A5E A5T 11/2 VV B5C B5D B5E B5T VVD C5A C5B C5C C5D C5E C5T VVT D5C D5D D5E D5T VVD (Vertica/Vertica/ Drain) VVT (Vertica/Vertica/ Tee Drain) VH A2A* A2B* A2C A2D A2E A2T 2 VV B2C B2D B2E B2T VVD C2A* C2B* C2C C2D C2E C2T VVT D2C D2D D2E D2T *Not avaiabe on Modes 741, 742, and 743. Step 4: Trim Materia 741 AA1CBA1N4CRTT Seect the interna trim materia from the chart beow. Consut the factory for pressure ratings on Mone trim. Designator Dispacer Materia Attraction Seeve Avaiabe with Chamber Materia: B 316/316L Stainess Stee 400 Stainess Stee A106 Carbon Stee (A) ony C 316/316L Stainess Stee 316/316L Stainess Stee M Mone 400 Mone 400 A106 Carbon Stee (A) or 316/316L Stainess Stee (C) A106 Carbon Stee (A) or 316/316L Stainess Stee (C) SORInc.com Registered Quaity System to ISO /60

28 and 802 Series Caibration Dimensions The charts beow provide typica standard Set Points. As the specific gravity used on a eve switch changes, the Set Points wi aso change. These vaues are based on the specific gravity isted and units with B trim and an A1 switch. For other materias or switches, pease consut factory. If a specific Set Point is needed, pease use the SC option found in the accessories section of this cataog. Specific Gravity Mode 741, 742, 743 B C /16 45/ /16 61/16 Specific Gravity Mode 802 B C.41 23/8 55/ /16 67/16 Chamber Dimensions Dimensions isted are for reference ony and are expressed as miimeters over inches. (Linear = mm/in.) PURCHASE ORDER # They are subject to change without notice. Contact SOR for certified drawings of particuar modes or if specia dimensions are required DRAING NUMBER MODEL # SALES ORDER # * MINIMUM 5.75 REQUIRED TO REM * * L L ISO9001 D H G PRODUCT CERTIF ALL DIMENSIO UNLESS OTHE LINEA Note: A process fange nippes are 1 standard. Housing** Genera Purpose Exposion Proof Exposion Proof Exposion Proof Pneumatic ATEX Fame Proof/IS IECEx Fame Proof E F N4 N7 B1 B2 P1 T6 S3 w/cl S3 S8 1" S Drawing (VVT ONLY) F Drawing NPT (3) 1/4 NPT M20 x 1.5*** MODEL # PURCHASE ORDER # Mode Name: MODEL NAME.DRAFT/3/0+ * Minimum 53/4 (146 mm) overhead cearance required to remove housing cover. ** See Housing section. (Page 48.) *** M20 adapters are brass. Contact the factory for aternate materias. Mode Name: MODEL NAME.DRAFT/3/0+ Reset Form Drawing /60 Registered Quaity System to ISO SORInc.com DRAIN CONN 1"NPT OR S E F I L * THIS DRAING NO USE HATSOE HEREON, NOR REP MADE ITHOUT TH TITLE DIM DG 100 SERI EXTERNAL CHAMBE EO NUMBER: 5090 DRAING NUMBER SCALE: DRAING S SALES ORDER # DO NOT SCALE PRINT LI * MINIMUM OVERHEA 5.75 REQUIRED TO REMOVE HOU TH ST 913 ISO9001 SOR PRODUCT CERTIFICATION DRA ALL DIMENSIONS ARE ±1/1 UNLESS OTHERISE SPECIF MM LINEAR = IN THIS DRAING IS THE EXCLUSI NO USE HATSOEVER OF THE IN HEREON, NOR REPRODUCTION IN MADE ITHOUT THE EXPRESS RI TITLE DIM DG 100 SERIES SERVICEAB EXTERNAL CHAMBER VVD STYLE DRAING EO NUMBER: 5090 SCALE: DRAING SCALE SH DO NOT SCALE PRINT

29 and 802 Series Chamber Dimensions 1 Connections Mode D 1, 2 E 1, 2 F 4 G H 4 I 2 L 2 inch mm inch mm inch mm inch mm inch mm inch mm inch mm / / / / / / / / / /2 Connections Mode D 2 E 2 F 4 G H 4 I 2 L 2 inch mm inch mm inch mm inch mm inch mm inch mm inch mm / / / / / / / / Connections Mode D 2 E 2 F 4 G H 4 I 2, 3 L 2, 3 inch mm inch mm inch mm inch mm inch mm inch mm inch mm / / / / / / / / Notes 1. Dimensions D and E appy to socketwed connections ony. Consut factory for NPT dimensions. 2. Consut factory for dimensions for materias other than carbon stee. 3. Appies to socket wed or NPT process connections ony. 4. Consut the factory if wed neck process fanges are required. Dimensions may vary from those shown above. 5. Appies to fanged process connections ony. SORInc.com Registered Quaity System to ISO /60

30 740 and 804 Series Step 1: Mode Series 740 AA1CBA1N4CRTT The 740 and 804 Series mechanica eve switches are dispacer operated with seaed, tamperproof externa chambers. Seect the sensing unit from the foowing charts. Then refer to pages for switching eements, housings and accessories. Seect a mode series from the charts beow based on maximum operating pressure and minimum specific gravity. Maximum orking Pressure Mode Series Chamber Materia Pressure at Listed Temperature in psig (bar)* 100 F (38 C) 200 F (93 C) 300 F (149 C) 350 F (177 C) 400 F (204 C) 450 F (232 C) (102.0) 1465 (101.0) 1450 (100.0) 1436 (99.0) 1420 (97.9) 1380 (95.1) (232.8) (257.0) (232.8) (251.5) (232.8) (226.6) (232.8) (217.3) (232.8) (207.9) (232.8) (201.0) * Consut the factory for pressure ratings of units with Mone trim. Standard dispacer units are not avaiabe over 450 o F (232 o C). Minimum Specific Gravity Mode Series Standard AntiVibration or Pneumatic Step 2: Chamber Materia 740 AA1CBA1N4CRTT Seect chamber materia from the foowing chart. Maximum working pressure in the chart above is based on the materia seected here. Consut the factory for aternative materias. Designator A C Materia A106 Grade B Carbon Stee with A105 and A234PB fittings A312TP316/316L Stainess Stee with A182316/316L and A403316/316L fittings 30/60 Registered Quaity System to ISO SORInc.com

31 740 and 804 Series Step 3: Process Connection 740 AA1CBA1N4CRTT Seect a process connection size, stye and designator from the chart beow. Consut the factory for variations. Fanged process connections may reduce the maximum working pressure of the unit. Size 1 11/2 2 Stye NPT Thread *Not avaiabe on Mode 740. Socket ed VH (Vertica/Horizonta) VVD (Vertica/Vertica/ Drain) VV (Vertica/Vertica) VVT (Vertica/Vertica/ Tee Drain) Step 4: Trim Materia 740 AA1CBA1N4CRTT Seect the interna trim materia from the chart beow. Consut the factory for pressure ratings on Mone trim. Caibration Dimensions 150# RF 300# RF Fange The charts beow provide typica standard Set Points. As the specific gravity used on a eve switch changes, the Set Points wi aso change. These vaues are based on the specific gravity isted and units with B trim and an A1 switch. For other materias or switches, pease consut factory. If a specific Set Point is needed, pease use the SC option found in the accessories section of this cataog. 600# RF 1500# RTJ VH A1A A1B A1C A1D A1E A1T VV B1C B1D B1E B1T VVD C1A C1B C1C C1D C1E C1T VVT D1C D1D D1E D1T VH A5A A5B A5C A5D A5E A5T VV B5C B5D B5E B5T VVD C5A C5B C5C C5D C5E C5T VVT D5C D5D D5E D5T VH A2A* A2B* A2C A2D A2E A2T VV B2C B2D B2E B2T VVD C2A* C2B* C2C C2D C2E C2T VVT D2C D2D D2E D2T Designator Dispacer Materia Attraction Seeve Avaiabe with Chamber Materia: B 316/316L Stainess Stee 400 Stainess Stee A106 Carbon Stee (A) ony C 316/316L Stainess Stee 316/316L Stainess Stee M Mone 400 Mone 400 A106 Carbon Stee (A) or 316/316L Stainess Stee (C) A106 Carbon Stee (A) or 316/316L Stainess Stee (C) Specific Gravity Mode 740 B C /16 45/ /16 61/16 Specific Gravity Mode 804 B C.41 23/8 55/ /16 67/16 SORInc.com Registered Quaity System to ISO /60

32 740 and 804 Series Dimensions isted are for reference ony and are expressed as miimeters over inches. (Linear = mm/in.) They are subject to change without notice. Contact SOR for certified drawings of particuar modes or if specia MODEL # dimensions are required. PURCHASE ORDER # Housing** Genera Purpose Exposion Proof Exposion Proof Exposion Proof N4 N7 B1 B2 * Minimum 53/4 (146 mm) overhead cearance required to remove housing cover. ** See Housing section (page 48). *** M20 adapters are brass. Contact the factory for aternate materias. 1 NPT Pneumatic P1 (3) 1/4 NPT ATEX Fame Proof/IS IECEx Fame Proof T6 S3 w/cl S3 S8 M20 x 1.5*** Mode Name: MODEL NAME.DRAFT/2/0+ E F L D H * Drawing DRAING NUMBER MODEL # SALES ORDER # Chamber PURCHASE ORDER # Dimensions DRAING NUMBER SALES ORDER # *228.6 LINE ITEM # 9.00 L * MINIMUM OVERHEAD CLEARANCE 5.75 REQUIRED TO REMOVE HOUSING COVER. 1" S (VVT ONLY) F TH ST LENEXA, KS USA Drawing ISO9001 SORINC.COM DRAN BY 7.12 Mode Name: MODEL NAME.DRAFT/1/4+ M PRODUCT CERTIFICATION DRAING SMITH CHECKED BY ALL DIMENSIONS ARE ±1/16 IN 4.00 J REHM UNLESS OTHERISE SPECIFIED ENGINEER APPROVAL MM LINEAR = IN J FIFE DATE * /15/11 THIS DRAING IS THE EXCLUSIVE LPROPERTY OF SOR. NO USE HATSOEVER OF THE INFORMATION CONTAINED HEREON, NOR REPRODUCTION IN HOLE OR PART MAY BE MADE ITHOUT THE EXPRESS RITTEN PERMISSION OF SOR. TITLE DIM DG 200 SERIES SEALED CHAMBER VH DRAING NUMBER REV EO NUMBER: SCALE: DRAING SCALE DG SIZE SHEET DO NOT SCALE PRINT OF 1 A G Reset Form * MINIMUM OVERH 5.75 REQUIRED TO REMOVE H TH 9 ISO9001 THIS DRAING AS CREAT PRODUCT CERTIFICATION THE VERTICAL_MOUNT_AS ALL DIMENSIONS ARE ± UNLESS OTHERISE SP FILE txt LOCATED MM LINEAR = K:\$Engineering Services\Co IN THEN THE DRAING AS THIS DRAING IS THE EXC NO USE HATSOEVER OF TH DRAFT ENTITIES. HEREON, NOR REPRODUCTIO MADE ITHOUT THE EXPRESS TITLE DIM DG 200 SERIES SEALED VV, VVT DRA EO NUMBER: 5090 SCALE: DRAING SCALE DO NOT SCALE PRINT Note: A process fange nippes are 1 standard. 1 Connection Mode DRAIN CONN 1"NPT OR S D 1, 2 E 1, 2 F 4 G H 4 I 2 L 2 inch mm inch mm inch mm inch mm inch mm inch mm inch mm / / / / / / /4 552 E F I Drawing /2 Connection Mode D 2 E 2 F 4 G H 4 I 2 L 2 inch mm inch mm inch mm inch mm inch mm inch mm inch mm / / / / / / Connection Mode D 2 E 2 F 4 G H 4 I 2, 3 L 2, 3 inch mm inch mm inch mm inch mm inch mm inch mm inch mm / / / / / /4 552 Notes 1. Dimensions D and E appy to socketwed connections ony. Consut factory for NPT dimensions. 2. Consut factory for dimensions for materias other than carbon stee. 3. Appies to socket wed or NPT process connections ony. 4. Consut the factory if wed neck process fanges are required. Dimensions may vary from those shown above. 5. Appies to fanged process connections ony. 32/60 Registered Quaity System to ISO SORInc.com

33 700 Series Step 1: Mode Series 702 AF7ABA1N4CRTT The 700 Series mechanica eve switches are singestage, dispaceroperated switches suitabe for topinsertion tank mounting. Seect the sensing unit from the foowing charts. Then refer to pages for switching eements, housings and accessories. Seect a mode series from the charts beow based on maximum operating pressure and minimum specific gravity. Minimum specific gravity is based on singe switch. Antivibration and pneumatic switches have higher minimum specific gravities. Maximum orking Pressure Mode Series Minimum Specific Gravity Function Connection Stye Dispacer Materia Dispacer units are not avaiabe over 450 F (232 C). Connection Materia Pressure Rating psig (bar) 100 F (38 C) 450 F (232 C) Porceain A 1000 (69) 750 (52) NPT SS A 1000 (69) 750 (52) Narrow Fange Porceain Differentia Fange SS A (20) 185 (13) 275 (19) 182 (13) A (20) 185 (13) 275 (19) 182 (13) 705 Porceain A 1000 (69) 750 (52) NPT 706 SS A 1000 (69) 750 (52) ide Fange Porceain Differentia 708 Fange SS A (20) 185 (13) 275 (20) 182 (13) A (20) 185 (13) 275 (19) 182 (13) *An operating specific gravity is required for modes 705 through 708 at time of order. Step 2: Process Connection Materia 702 A F7ABA1N4CRTT Seect a process connection materia from the chart beow. Maximum working pressure in the chart above is based on the materia seected here. Consut the factory for aternative materias. Designator A C Materia A105 Carbon Stee fittings or fanges A182TP316/316L Stainess Stee fittings or fanges SORInc.com Registered Quaity System to ISO /60

34 700 Series Step 3: Process Connection 702 A F7ABA1N4CRTT Seect a process connection stye, size and rating from the chart beow. Consut the factory for variations. Fanged process connections may reduce the maximum working pressure of the unit. Size Stye Mode /2 NPT F7A F7A F7A F7A NPT F3A F3A F3A F3A 150# RF Fange F3C F3C F3C F3C 300# RF Fange F3D F3D F3D F3D 150# RF Fange F4C F4C F4C F4C 300# RF Fange F4D F4D F4D F4D 150# RF Fange F6C F6C F6C F6C 300# RF Fange F6D F6D F6D F6D Seect the interna trim materia from the chart beow. Dispacer Materia Attraction Seeve Construction Materia Standard dispacer spring materia is Incone 600. Step 4: Trim Materia 702 A F7ABA1N4CRTT Mode /316L SS 400SS A ony B B B B 316/316L SS 316/316L SS A or C C C C C Porceain 400SS A ony P P P P Porceain 316/316L SS A or C R R R R 34/60 Registered Quaity System to ISO SORInc.com

35 * D 700 Series Mode 701/703 21/2 NPT/Fanged Narrow Differentia Mode 702/704 21/2 NPT/Fanged Narrow Differentia Unit Dimensions Dimensions in this cataog are for reference ony. They may be changed without notice. Contact the factory for certified drawings for a particuar mode number. Dimensions are expressed as miimeters over inches. (Linear = mm/in.) SST CABLE MODEL # SALES ORDER # LINE ITEM # PURCHASE ORDER # PROCESS CONNECTION NPT A MINIMUM * SST CABLE MINIMUM PROCESS CONNECTION 21/2 NPT(M)(STD) 3 NPT(M)(OPT) Narrow Differentia Modes : Actuation differentia is approximatey Specific Gravity of 100 F. * * MINIMUM OVERHEAD CLEARANCE REQUIRED 5.75 TO REMOVE HOUSING COVER. ide Differentia Modes PROCESS : CONNECTION FLANGED Actuation differentia is adjustabe from approximatey 9 1/ Specific Gravity of F) MINIMUM 229 to avaiabe cabe ength SST CABLE ELECTRICAL CONN. "" : HIGH Drawing SITCH ACTUATION LO PORCELAIN DISPLACER Mode Name: _704.ASSEM/1/4+ Mode 705/707 21/2 NPT/Fanged ide Differentia 316 SST DISPLACER MODEL 702 SCALE 0.2 HIGH SITCH ACTUATION LO Drawing Mode 706/708 21/2 NPT/Fanged ide Differentia Housing** Genera 316 SSTPurpose DISPLACER Exposion Proof Exposion 63.5 Proof 2.50 Exposion Proof N4 N7 B1 B2 DIM DG 702, 704 Pneumatic P1 (3) NARRO 1/4 DIFFERENTIAL NPT ATEX Fame Proof/IS IECEx Fame Proof MODEL 704 SCALE 0.2 HIGH SITCH ACTUATION LO Reset Form T6 S3 w/cl S3 S TH ST LENEXA, KS USA ISO9001 SORINC.COM DRAN BY JFIXSEN PRODUCT CERTIFICATION DRAING CHECKED BY ALL DIMENSIONS ARE ±1/16 IN JKENT UNLESS OTHERISE SPECIFIED ENGINEER APPROVAL MM LINEAR = 1 NPT IN SBOAL DATE 2/4/03 THIS DRAING IS THE EXCLUSIVE PROPERTY OF SOR. NO USE HATSOEVER OF THE INFORMATION CONTAINED HEREON, NOR REPRODUCTION IN HOLE OR PART MAY BE MADE ITHOUT THE EXPRESS RITTEN PERMISSION OF SOR. TITLE EO NUMBER: 4441 SCALE: 0.20 DO NOT SCALE PRINT M20 x 1.5*** DRAING NUMBER REV DG SIZE SHEET 1 OF 1 B Reset Form * Minimum 53/4 (146 mm) overhead cearance required to remove housing cover. ** See Switch Housing section (page 48). *** M20 adapters are brass. Contact the factory for aternate materias. Drawing Drawing SORInc.com Registered Quaity System to ISO /60

36 730 Series Step 1: Mode Series 731 AF7ABA2N4CRTT The 730 Series mechanica iquid eve switches are duastage, dispaceroperated switches suitabe for topinsertion tank mounting. Seect the sensing unit from the foowing charts. Then refer to pages for switching eements, housings and accessories. Seect a mode series from the charts beow based on maximum operating pressure and minimum specific gravity. Maximum orking Pressure Mode Series Minimum Specific Gravity Function Connection Stye Dispacer Materia Narrow Fange Porceain Differentia Connection Materia Dispacer units are not avaiabe over 450 o F (232 o C). *An operating specific gravity is required for a 730 series at time of order. Pressure Rating psig (bar) 100 F (38 C) 450 F (232 C) Porceain A 1000 (69) 750 (52) NPT SS A 1000 (69) 750 (52) Fange SS ide Fange Porceain Differentia A (20) 185 (13) 275 (19) 182 (13) A (20) 185 (13) 275 (19) 182 (13) 734 Porceain A 1000 (69) 750 (52) NPT 735 SS A 1000 (69) 750 (52) 737 Fange SS A (20) 185 (13) 275 (20) 182 (13) A (20) 185 (13) 275 (19) 182 (13) Step 2: Process Connection Materia 731 A F7ABA2N4CRTT Seect a process connection materia from the chart beow. Maximum working pressure in the chart above is based on the materia seected here. Consut the factory for aternative materias. Designator A C Materia A106 Carbon Stee fittings or fanges A182TP316/316L Stainess Stee fittings or fanges 36/60 Registered Quaity System to ISO SORInc.com

37 730 Series Step 3: Process Connection 731 A F7ABA2N4CRTT Seect a process connection stye, size and rating from the chart beow. Consut the factory for variations. Fanged process connections may reduce the maximum working pressure of the unit. Size Stye Mode /2 NPT F7A F7A F7A F7A NPT F3A F3A F3A F3A 150# RF Fange F3C F3C F3C F3C 300# RF Fange F3D F3D F3D F3D 150# RF Fange F4C F4C F4C F4C 300# RF Fange F4D F4D F4D F4D 150# RF Fange F6C F6C F6C F6C 300# RF Fange F6D F6D F6D F6D Seect the interna trim materia from the chart beow. Step 4: Trim Materia 731 A F7ABA2N4CRTT Dispacer Materia Attraction Seeve Construction Materia Standard dispacer spring materia is Incone 600. Mode /316L SS 400SS A ony B B B B 316/316L SS 316/316L SS A or C C C C C Porceain 400SS A ony P P P P Porceain 316/316L SS A or C R R R R SORInc.com Registered Quaity System to ISO /60

38 730 Series Unit Dimensions Dimensions in this cataog are for reference ony. They may be changed without notice. Contact the factory for certified drawings for a particuar mode number. Dimensions are expressed as miimeters over inches. (Linear = mm/in.) Mode 730/732 21/2 NPT/Fanged Narrow Differentia Mode 731/733 21/2 NPT/Fanged Narrow Differentia MODEL # SALES ORDER # LINE ITEM # PURCHASE ORDER # SALES PAGE NPT A FLANGE B DIMENSION C SEE CHART DIMENSION D SEE CHART HIGH SITCH ACTUATION LO SITCH ACTUATION Mode Name: ASSEM/1/6+ PROCESS CONNECTION NPT A HIGH LO HIGH LO SST CABLE MODEL 730 SCALE 0.2 * D MINIMUM PORCELAIN DISPLACER * PROCESS CONNECTION FLANGE B SST 316 SST CABLE CABLE LOHIGH HIGH SITCH SITCH ACTUATION ACTUATION HIGH LO LO SITCH LO ACTUATION SITCH ACTUATION MINIMUM MINIMUM MODEL MODEL 732 SCALE 0.2 Drawing Drawing HIGH HIGH LO HIGH LO * PROCESS CONNECTION C 21/2 NPT(M) 316 SST DISPLACER PORCELAIN DISPLACER ELECTRICAL CONNECTION SIZE 3" 4" 6" Housing** 87.9 Genera 5.75 Purpose Exposion TH ST LENEXA, Proof KS USA SORINC.COM Exposion Proof DRAN BY K MITCHELL CHECKED BY Exposion Proof M SMITH ISO9001 DIMENSION C FLANGE # 300 # # DIMENSION D /2 NPTM NPTM PRODUCT CERTIFICATION DRAING ALL DIMENSIONS ARE ±1/16 IN UNLESS OTHERISE SPECIFIED MM LINEAR = IN ENGINEER APPROVAL J FIFE DATE 21 JUN 2011 THIS DRAING IS THE EXCLUSIVE PROPERTY OF SOR. NO USE Pneumatic HATSOEVER OF THE INFORMATION CONTAINED HEREON, NOR REPRODUCTION IN HOLE OR PART MAY BE MADE ITHOUT THE EXPRESS RITTEN PERMISSION OF SOR. TITLE DIMENSION DRAING 730, 732 NARRO DIFFERENTIAL DRAING NUMBER REV EO NUMBER: 5090 ATEX SCALE: 0.20 DG SIZE SHEET 1 OF 1 DO NOT SCALE PRINT Fame Proof/IS B Reset Form IECEx Fame Proof * MINIMUM OVERHEAD CLEARANCE REQUIRED TO REMOVE HOUSING COVER N4 N7 B1 B2 P1 T6 S3 w/ CL S3 S8 1 NPT (3) 1/4 NPT M20 x 1.5*** Reset Form Mode 734/736 21/2 NPT/Fanged ide Differentia Mode 735/737 21/2 NPT/Fanged ide Differentia * Minimum 53/4 (146 mm) overhead cearance required to remove housing cover. ** See Switch Housing section (page 48). *** M20 adapters are brass. Contact the factory for aternate materias. Drawing Drawing /60 Registered Quaity System to ISO SORInc.com

39 730 Series Specific Gravity Ranges Optiona Switching Arrangements Duastage, wide differentia switches may be ordered with switching arrangements different from those shown on page 38. To order, seect the desired arrangement beow and add SC to the accessory section of the mode number. At the time of order, specify the required arrangement number. Porceain dispacers are shown for pictoria purposes ony. Arrangement 1 Arrangement 2 Arrangement 4 Arrangement 5 Arrangement 6 Switch Position SORInc.com Registered Quaity System to ISO /60

40 750 Series Step 1: Mode Series 751 AF7ABA3N1CRTT The 750 Series mechanica eve switches are threestage, dispaceroperated switches suitabe for topinsertion tank mounting. Seect the sensing unit from the foowing charts. Then refer to pages for switching eements, housings and accessories. Maximum orking Pressure Mode Series Minimum Specific Gravity Function Connection Stye Dispacer Materia Narrow Fange Porceain Differentia Dispacer units are not avaiabe over 450 o F (232 o C). Connection Materia Pressure Rating psig (bar) 100 F (38 C) 450 F (232 C) Porceain A 1000 (69) 750 (52) NPT SS A 1000 (69) 750 (52) Fange SS ide Fange Porceain Differentia A (20) 185 (13) 275 (19) 182 (13) A (20) 185 (13) 275 (19) 182 (13) Porceain A 1000 (69) 750 (52) NPT SS A 1000 (69) 750 (52) Fange SS *An operating specific gravity is required for a 750 series at time of order. A (20) 185 (13) 275 (20) 182 (13) A (20) 185 (13) 275 (19) 182 (13) Step 2: Process Connection Materia 751 A F7ABA3N1CRTT Seect a process connection materia from the chart beow. Maximum working pressure in the chart above is based on the materia seected here. Consut the factory for aternative materias. Designator A C Materia A105 Carbon Stee fittings or fanges A182TP316/316L Stainess Stee fittings or fanges 40/60 Registered Quaity System to ISO SORInc.com

41 750 Series Step 3: Process Connection 751A F7ABA3N1CRTT Seect a process connection stye, size and rating from the chart beow. Consut the factory for variations. Fanged process connections may reduce the maximum working pressure of the unit. Size Stye Mode /2 NPT F7A F7A F7A F7A NPT F3A F3A F3A F3A 150# RF Fange F3C F3C F3C F3C 300# RF Fange F3D F3D F3D F3D 150# RF Fange F4C F4C F4C F4C 300# RF Fange F4D F4D F4D F4D 150# RF Fange F6C F6C F6C F6C 300# RF Fange F6D F6D F6D F6D Seect the interna trim materia from the chart beow. Step 4: Trim Materia 751 A F7ABA3N1CRTT Dispacer Materia Attraction Seeve Construction Materia Standard dispacer spring materia is Incone 600. Mode /316L SS 400SS A ony B B B B 316/316L SS 316/316L SS A or C C C C C Porceain 400SS A ony P P P P Porceain 316/316L SS A or C R R R R SORInc.com Registered Quaity System to ISO /60

42 750 Series Dimensions Dimensions in this cataog are for reference ony. They may be changed without notice. Contact the factory for certified drawings for a particuar mode number. Dimensions are expressed as miimeters over inches. (Linear = mm/in.) Mode 750/752 21/2 NPT/Fanged Mode 751/753 21/2 NPT/Fanged Mode 754/756 21/2 NPT/Fanged MODEL # SALES ORDER # LINE ITEM # PURCHASE ORDER # Mode 755/757 21/2 NPT/Fanged SALES PAGE NPT A FLANGE B DIMENSION C SEE CHART DIMENSION D SEE CHART TOP SITCH ACTUATION MIDDLE SITCH ACTUATION BOTTOM SITCH ACTUATION * D MINIMUM Drawing MODEL 751 Drawing MODEL 753 Drawing SCALE 0.15 EO NUMBER: 5123 Drawing Mode Name: ASSEM/2/0 HIGH LO SST CABLE HIGH LO HIGH LO * Minimum 83/4 (222 mm) overhead cearance required to remove housing cover PROCESS CONNECTION NPT A 316 SST DISPLACER TOP SITCH ACTUATION MIDDLE SITCH ACTUATION BOTTOM SITCH ACTUATION * C HIGH LO HIGH LO HIGH LO SST CABLE MINIMUM PROCESS CONNECTION FLANGE B 316 SST DISPLACER ELECTRICAL CONNECTION SIZE 3" 4" 6" DIMENSION C FLANGE 150 # 300 # 600 # DIMENSION D /2 NPTM NPTM * MINIMUM OVERHEAD CLEARANCE 8.75 REQUIRED TO REMOVE HOUSING COVER TH ST LENEXA, KS USA ISO9001 SORINC.COM DRAN BY K MITCHELL PRODUCT CERTIFICATION DRAING CHECKED BY ALL DIMENSIONS ARE ±1/16 IN J REHM UNLESS OTHERISE SPECIFIED ENGINEER APPROVAL MM LINEAR = IN R SAVERINO DATE 27 JUL 2011 THIS DRAING IS THE EXCLUSIVE PROPERTY OF SOR. NO USE HATSOEVER OF THE INFORMATION CONTAINED HEREON, NOR REPRODUCTION IN HOLE OR PART MAY BE MADE ITHOUT THE EXPRESS RITTEN PERMISSION OF SOR. TITLE DIMENSION DRAING 751, 753 NARRO DIFFERENTIAL DRAING NUMBER REV SCALE: 0.15 DG SIZE SHEET 1 OF 1 DO NOT SCALE PRINT B Reset Form Housing** Exposion Proof Genera Purpose Exposion Proof B5 N1 N8 ** See Switch Housing section (Page 48). 1 NPT 42/60 Registered Quaity System to ISO SORInc.com

43 750 Series Specific Gravity Ranges Optiona Switching Arrangements Threestage, wide differentia switches may be ordered with switching arrangements different from those shown on page 42. To order, seect the desired arrangement beow and add SC to the accessory section of the mode number. At the time of order, specify the required arrangement number. Porceain dispacers are shown for pictoria purposes ony. Arrangement B Arrangement C Arrangement D Arrangement E Arrangement F Arrangement G Arrangement H Switch Position SORInc.com Registered Quaity System to ISO /60

44 Leve Switches Switching Mechanisms SOR switching mechanisms are designed for use in harsh industria atmospheres. SOR offers a variety of eectrica and pneumatic switching mechanism types to fit a wide range of appications. The basic types of switch mechanisms avaiabe are isted beow. See page 47 for specifications. A SOR switching mechanisms are constructed from stainess stee and other durabe manufactured materias. Each mechanism is individuay caibrated and inspected to insure accuracy and repeatabiity. See beow for the benefits and appication of each switch type. A mechanisms are interchangeabe with most competitor units. Standard DryContact Switches Types A, B, C, E Standard drycontact switches have open mechanisms and exposed switching eements. These switching mechanisms are easy to maintain. Visua confirmation of operation is obvious. Drycontact switch mechanisms are recommended for most eve switch appications and are avaiabe in SPDT and DPDT switch arrangements. DryContact Switch Mechanisms feature: Highoad carrying capacity Highquaity phenoic insuator Vibration resistance Versatiity of appication MiniHermeticay Seaed Switches Types L, S, T, V Minihermeticay seaed switches have a hermeticay seaed switch eement on an exposed mechanism. Good for hightemperature service and norma appications that require hermeticay seaed contacts. MiniHermeticay Seaed Switch Mechanisms feature: Rugged stainess stee construction Cass I Group A rating for use in hazardous areas Vibration resistance High operating temperature imits AntiVibration Switches Types D and R AntiVibration Switches empoy two magnets to provide vibration protection. Dua magnets prevent fase trips by providing a positive mechanica ock to the encosing tube when the switch is in any position. (Type T switches are minihermeticay seaed units with dua magnets.) 44/60 Registered Quaity System to ISO SORInc.com

45 Leve Switches Switching Mechanisms Pneumatic Switch Type J Pneumatic switches are avaiabe for appications that prohibit eectrica switching or where eectricity is not avaiabe. Pneumatic switches feature: Threeway auminum vave Antivibration design 1/4" NPT ports in for additiona corrosion resistance ExtraHigh Temperature Switch Type Y The Y Series eve switch mechanism is designed to operate normay under extremey hightemperature conditions. Constructed of stainess stee, ceramic, and oxidationresistant aoys, the Y Series is designed to counteract the warping and seizure normay associated with this type of mechanism in high temperatures. The Y Series switch is especiay we suited for power pant conditions. Y Series Switch Mechanisms feature: Mica/gass insuation on wires and switches Stainess stee and ceramic switch eement and termina bock Switch mechanism rated at 800 F (427 C) continuous process temperature Can be combined with externa temperature protection to function in temperatures up to 1200 F (649 C) Dua magnets for vibration protection SORInc.com Registered Quaity System to ISO /60

46 Leve Switches Switching Mechanisms 741A A1CBA1N4CRTT Seect the switch mechanism from the chart beow. Switch Type SPDT Singe Poe Doube Throw DPDT Doube Poe Doube Throw 3ay Vave Switching Stages Singe Dua Tripe Singe Dua Tripe Singe Switching Description Standard Dry Contact HighTemperature Dry Contact God Contact AntiVibration Dry Contact 1 HighAmperage DC Service A1 B1 C1 D1 1 E1 A2 B2 C2 E2 Switch Designator A3 B3 C3 E3 A4 B4 C4 D4 1 E4 A5 B5 C5 A8 B8 C8 CSA UL Avaiabe Agency Listings Standard MiniHermeticay Seaed L1 L2 L3 L4 L5 L8 AntiVibration God Contact 1 R1 1 R4 1 E5 E8 ATEX (fameproof) ATEX (IS) IECEx INMETRO (fameproof) INMETRO (IS) Rostechnadzor (RTN) God Contact MiniHermet AntiVibration MiniHermet 1 HighTemperature MiniHermet S1 T1 1 V1 S2 V2 S3 V3 S4 T4 1 V4 S5 V5 S8 V8 ExtraHigh Temperature (Ceramic) Pneumatic NonBeed with Fittings Y1 1 Y4 1 J0 1,2 Avaiabe with modes: Series Series 108/ Series 700 Series 730 Series 750 (encosures N1, N8 or B5 ony) Notes 1. These switches use two magnets and must be considered dua mechanisms when figuring minimum specific gravity. 2. Pneumatic switching mechanisms must be specified with P1 housing. 46/60 Registered Quaity System to ISO SORInc.com

47 Leve Switches Switch Ratings Resistive Amperage Inductive Amperage Switch Designator VAC VAC 2030VDC VDC VDC VAC VAC 2030VDC VDC VDC Minimum Temperature 1 Maximum Temperature 2 A Standard Dry Contact F (26 C) 250 F (121 C) B HiTemperature Dry Contact F (26 C) 400 F (204 C) C God Contact F (26 C) 250 F (121 C) D AntiVibration F (26 C) 250 F (121 C) E HighAmp DC F (26 C) 250 F (121 C) L 5 R S T 5 V Y 6 J 4 Mini Hermeticay Seaed AntiVibration God Contact God Contact MiniHermet AntiVibration MiniHermet HighTemperature MiniHermet ExtraHigh Temperature (Ceramic) Pneumatic Fittings DPDT SPDT F (26 C) 250 F (121 C) F (26 C) 250 F (121 C) F (26 C) 250 F (121 C) DPDT F (26 C) 250 F (121 C) SPDT F (26 C) 250 F (121 C) F (26 C) 400 F (204 C) F Note 3 Nonbeed 3way auminum vave body. BunaN ORings 150 psi maximum suppy, 100 psi (40 C) 800 F (427 C) 5 F (15 C) 200 F (93 C) Notes 1. Minimum ambient temperature at which the switch mechanism wi operate normay. This may vary according to actua cimatic conditions. Actua minimum process temperature may be much ower. Consut the factory for detais. 2. Maximum process temperature at which the switch mechanism wi operate normay. This can be increased according to the type of process. Refer to pages for more detais F Temperature rating with no icing. 4. Pneumatic switches must be used with cean, dry air or gas. 5. These switch designators have higher current rating for SPDT than DPDT. 6. Manufacturer specifications state maximum operating humidity must be <85% and minimum power rating is 100m. SORInc.com Registered Quaity System to ISO /60

48 Leve Switches SOR housings are designed to protect the switching mechanisms from harsh environmenta conditions, as we as protecting the surrounding atmosphere from potentia ignition sources. The basic types of housings are isted beow. Genera Purpose, NEMA 4 Housings are heavy duty cast auminum. A housings are rated NEMA 4 (IP65) as a minimum. ExposionProof Housings are avaiabe in auminum or cast iron. ExposionProof ratings incude Cass I, Group B, C, D; Division 1 & 2, and Ex d IIC T6 Gb (ATEX) and Ex d IIC T6 (IECEx). Pneumatic Switch Housings are required for use with a pneumatic switching mechanism. These encosures are Genera Purpose, NEMA 4 (IP65) ony. NEMA 4X Housings are standard in auminum. Cast iron encosures can be rated NEMA 4X by adding epoxy coating. Switch Housings Seect the housings from the chart beow. Housings 741A A1CBA1N4CRTT Agencies Avaiabe with Modes Designator Description Encosure Rating 2 CSA UL ATEX TestSafe Rostechnadzor INMETRO 100, 200, , 208, , s 730 s 750 s B1 Auminum Groups B, C, & D B2 2 Cast Iron Groups B, C, & D B5 Auminum Extended Groups B, C, & D N1 Auminum Extended NEMA 4, 4X N4 Auminum NEMA 4, 4X N6 2 Cast Iron Doube Hub Groups C & D N7 Auminum Groups C & D N8 Auminum Extended Groups C & D P1 1 Auminum Pneumatic NEMA 4, 4X S3 Avaiabe Auminum Ex d IIC T6 (IECEx) Ex d IIC T6 Gb (ATEX) Ex ia IIC T6 Gb (ATEX) n S8 2 Cast Iron Ex d IIC T6 (IECEx) n T6 2 Cast Iron Ex d IIC T6 Gb(ATEX) Ex ia IIC T6 Gb (ATEX) n Standard (Agency isting accessory designator is not needed.) 1. P1 housing must be used with pneumatic switch mechanisms. 2. A cast iron housings can be rated NEMA 4X by adding PY to the accessory section of the mode number. 48/60 Registered Quaity System to ISO SORInc.com

49 Leve Switches AF 1 FE CL CN7 CP7 CR7 CS 2 CV CY CZ 3 DN EC 8 ET 5 FE GG ID 9 KK MC 4 MR MT NC NM PP PT PY RR RT SC 10 SD 11 SL 12 TC 4 TF TT UT VV C V 2 Description Air Fiter & Gauge Finned Extention ATEX Approved for S3 Hsg Conduit Reducer M20 x 1.5 Conduit Reducer 1/2 NPT Conduit Reducer 3/4 NPT CSA Certification Canadian Registration Number (CRN) Certificate of Conformance (power pant piping, ANSI 31.1) Certificate of Conformance (petrochemica piping, ANSI 31.3) Specia Drain Connection Extra Chamber Connection Temperature Extension Finned Extention Seaed Conduit Interface Detection Housing Breather Drain Manua Check Mi Test Report Mag Partice Examination NACE Construction INMETRO Approved for S3 Hsg Fiber Tag Dye Penetration Examination Powder coat epoxy coating. No coating on stainess stee parts or pated screws. (500 hrs. sat spray) SS Tag wired to housing Radiograph Examination Specia Caibration Specia Dimensions Specia Cabe Length TruCheck Tandem Foats Oversized Namepate for customer tagging Utrasonic Examination Fungicida Varnish ater Coumn Unit UL Listed C/F C/F C/F C/F C/F C/F C/F C/F C/F 108/ 208 C/F C/F C/F Mode Series C/F C/F C/F C/F C/F C/F C/F C/F C/F C/F C/F Accessories 741A A1CBA1N4CRTT SOR accessories are provided for customizing the eve switches in this cataog according to the requirements of the appication. Pace accessory designator(s) from the tabe beow at the end of the mode number. Check the compatibiity chart beow for correct use of each accessory. Accessory Compatibiity Chart YY Epoxy Coating (encosure ony) Notes C/F = Consut the Factory 1. Pneumatic switching mechanisms ony (P1) 2. Consut switch and housing sections for agency avaiabiity. 3. Process media must be known prior to manufacture. Different processes (service categories) require different quaity inspection procedures. Consut the factory for detais. 4. Appropriate for Mode Series 701 through 704 and 730 through 733. See page 55 for detais. Not avaiabe with NACE. 5. See hightemperature seection for appication. 6. Not avaiabe with agencyisted housings. 7. Not avaiabe with T6 and S3 (ATEX) housings. 8. Need connection size, type, and ocation on chamber. 9. The upper and ower specific gravity required to determine functionaity. 10. Operating specific gravity, Set Point (referenced from upper process connection) and if Set Point is rising or faing are required. 11. Specific detais of chamber dimensiona changes. 12. Length of cabe required (10 ft. is standard). SORInc.com Registered Quaity System to ISO /60

50 Leve Switches Test Certificates Foat Operated Switches Series 100 Series 200 Series 220 Series 300 Series 400 Series 108/208 Certificates C1 C2 C3 C4 C5 C6 C7 B2 B3 B5 B6 B7 A2 A3 A4 A7 A8 A9 Caibration Hydrostatic Pressure Test Inspection Report Compiance / Conformance Dieectric Test Insuation Resistance QA Test Report Dispacer Operated Switches Series 700, 730, 750 *Series 740 *Series 800 Certificates C1 C3 C4 C5 C6 C7 B5 B6 B7 Caibration Inspection Report Compiance / Conformance Dieectric Test Insuation Resistance QA Test Report *These products aso have Certificate C2 Hydrostatic Pressure Test. 50/60 Registered Quaity System to ISO SORInc.com

51 Leve Switches High Temperature Seection SOR eve switches can accommodate hightemperature appications up to 1200 o F (649 o C). These temperatures may be safey reached by a proper combination of chamber materia, switch mechanism and temperature extension. Refer to page 52 to seect the proper components for your process temperature. ET Accessory The straight temperature extension provides physica distance between the process and the switching mechanism. It is constructed of a straight piece of pipe weded between the chamber and encosing tube connection. How It orks The straight temperature extension is designed to remove the switch from direct radiant heat in dry heat processes. Consut the chart on page 52 for appication. To Specify Add Accessory Designator ET to the end of the SOR eve switch mode number per the seection chart on the next page. The ET accessory automaticay matches the materia and rating of the specified eve switch chamber. This option can be suppied on SOR eve switches Series 100, 200, 300 and A A1CBA1N4ET TT FE Accessories 201 A A1CBA1N4FE TT The finned temperature extension is designed to protect the eectrica portion of a eve switch from heat damage due to condensing processes. hen used in combination with hightemperature switch mechanisms, this option aows operation in process temperatures up to 1200 o F (649 o C). How It orks The finned temperature extension condenses process steam and reduces its heat before it can reach the switching mechanism. The design reduces steam to its saturation temperature in the encosing tube, protecting the switching mechanism from deterioration due to high temperatures. The process pressure dictates the saturation temperature, see page 57. To Specify Add Accessory Designator FE to the end of the SOR eve switch mode number per the seection chart on the next page. The finned temp. extension automaticay matches the materia and rating of the specified eve switch chamber. These options can be suppied on SOR eve switches series 100, 200,108/208, 300 and 400. Note: For proper cooing, temp. extensions must not be insuated or paced inside an encosed structure. High ambient temperatures (over 100 o F/38 o C), intense direct sunight, or heat oading from adjacent piping or vesses wi affect cooing performance. Consut the factory if any of these conditions exist. * Drawing SITCH ENCLOSURE TEMPERATURE EXTENSION CHAMBER/PROCESS CONNECTION SORInc.com Registered Quaity System to ISO /60

52 Leve Switches High Temperature Seection There are two sections to the chart, Steam Heat and Dry Heat. Fundamenta differences in condensing (steam) and noncondensing (dry) heat require different methods of protection. Steam Heat processes carry it s heat with the vapor. These processes effectivey heat every portion of their encosure. To reduce the heat effects of condensing processes, we must either condense or physicay bock the vapor. SOR uses a condensing system to avoid the seaing probems associated with bocking the steam. Dry Heat processes transfer heat through direct conduction. Heat is ony passed to the areas where they touch the encosure. Therefore, radiant heat is the ony concern with these processes. This may be resoved by adding distance between the process and the protected portion of the contro. To use the seection chart, first seect the coumn that represents the desired maximum temperature. Seect a chamber materia that is aowabe in the chosen coumn. Move down to the proper process type section, Steam Heat or Dry Heat. ithin that section, seect a switch mechanism from those isted in the chosen coumn. The symbo wi indicate if a temperature reduction device is required. High Temperature Seection Chart Features Chamber Materia (Seect one) Carbon Stee 304/304LSS 316/316LSS Designator A C 0400 o F (204 o C) 450 o F (232 o C) 500 o F (260 o C) 550 o F (288 o C) 600 o F(316 o C) 650 o F (343 o C) 700 o F (371 o C) 750 o F (399 o C) 800 o F (427 o C) 850 o F (454 o C) 900 o F (482 o C) 950 o F (510 o C) 1000 o F (538 o C) 1050 o F (566 o C) 1100 o F (593 o C) 1150 o F (621 o C) 1200 o F (649 o C) A333 GR.6 A335P11 Chrome Moy A335P91 Hasteoy C Aoy20 Mone400 Steam Heat Appications Switch Mechanism (Seect one) HiTemp Dry Contact or MiniHermet B/V n v v HiTemperature Ceramic/SS Y n n n n n n n n n v v v v v v v v Switch Mechanism (Seect one) HiTemp MiniHermet or Dry Contact Dry Heat Appications B/V n HiTemperature Ceramic/SS Y n n n n n n n n n For proper cooing, temperature extensions and finned extensions must not be insuated or paced inside an encosed structure. High ambient temperatures (over 100ºF/38ºC), intense direct sunight or heat oading from adjacent piping or vesses wi affect cooing performance. Consut the factory if any of these conditions exist. n = Switch Ony v = Finned Extension = Temperature Extension 52/60 Registered Quaity System to ISO SORInc.com

53 Higher temperatures avaiabe with other materias. Consut with the factory. Leve Switches High Temperature Seection Foat Switch Pressure Ratings (in psi) above 450 F (232 C) Mode Materia 500 F (260 C) 550 F (288 C) 600 F (316 C) 650 F (343 C) 700 F (371 C) 750 F (399 C) 101 CS & SS CS & SS CS SS CS & SS CS SS CS & SS CS & SS CS & SS CS & SS CS & SS CS & SS CS & SS CS & SS CS & SS CS & SS CS SS CS & SS CS & SS SORInc.com Registered Quaity System to ISO /60

54 Examination and Testing Requirements 741A A1CBA1CYCRTT Specify either a CY or CZ option in the accessory section of the mode number for a certificate of conformance. Designator CY CZ Certificate of Conformance to ASME/ANSI B31.1 Power Piping ASME/ANSI B31.3 Petrochemica Piping If certification to B31.3 is required, SOR, Inc. must know the fuid category per the chart beow. Read the ASME/ANSI B31.3 Fuid Category Section at the bottom of this page to determine the appicabe category. Units Covered Notes 1. In process visua inspection: inspecting pipe beve prior to weding, check fitup, check aftertack wed, and check during wed passes. After competion visua inspection: weding and grinding is checked. 2. In process examination may be substituted on a wedforwed basis. 3. In process examination suppemented by appropriate NDE (MT or PT) may be substituted on a wedforwed basis. ANSI/ASME B31.3 Fuid Category Norma Category D Category M Severe Cycic High Pressure Visua Examination 1 Radiographic (XRay) RT Standard Inspection Magnetic Partice MT Dye Penetrant PT A Chambers 100% 0% 0% 0% Beow 750 F Beow 1025 psi Beow 350 F A pressures 350 F 750 F Above 1025 psi Above 750 F A pressures CY Option (ASME/ANSI B31.1) 100% 100% 100% A butt weds >2 100% A butt weds >2 Butt weds >2 a other weds CZ Option (ASME/ANSI B31.3) Butt weds >2 a other weds Norma Fuid 5% 5% 2 Category D Engineering/QA Choice Category M 100% 20% of a weds 3 Severe Cycic 100% in pace of RT High Pressure 100% 100% of a butt weds+ 100% of girth/ branch weds MT of weds RT MT of weds RT Hydrotest 1.5 x pressure for 3 minutes 1.5 x pressure for 10 minutes 1.5 x pressure for 10 minutes A fuid service not subject to the foowing four categories. A fuid service in which a of the foowing appy: 1. The fuid handed is nonfammabe, nontoxic, and not damaging to human skin. 2. The design gage pressure does not exceed 150 psi. 3. The design temperature is between 20 F and 366 F. A fuid service in which the potentia for personne exposure is judged to be significant and in which a singe exposure to a very sma quantity of a toxic fuid, caused by eakage, can produce serious irreversibe harm to persons on breathing or bodiy contact, even when prompt restorative measures are taken. A fuid service with highcyce rates that cause extreme stress on components. Pressure in excess of that aowed by the ASME B16.5 Cass 2500 rating for the specified temperature and materia group or any piping so designated by the customer. 54/60 Registered Quaity System to ISO SORInc.com

55 Leve Switches MC and TC Options 702AAICBA1MCCRTT Manua Check (MC) and TruCheck (TC) options permit manua actuation of vertica dispacer eve switches, addressing EPA and OSHA safety requirements. The standard 30foot stainess stee chain aows manua actuation from the tank base, eiminating potentiay hazardous trips to the top of the tank. Specify either an MC or TC option by pacing the designator in the accessory section of the mode number. Designator TC MC Appication Tanks or vesses pressurized to 100 psi Atmospheric vented tanks or vesses These options are avaiabe on SOR eve switch Series 701 through 704 and 730 through 733. MC and TC option avaiabe on carbon stee units ony. Series 730 through 733 are more sensitive to both high and ow SG vaues. Pease consut factory before ordering the MC or TC options for these modes. How It orks Puing the hande transfers downward motion to the actuator ever by means of the beaded stainess stee chain. The resutant motion ifts the entire eve sensing assemby which moves the attraction seeve and actuates the switching eement to simuate a higheve condition. Switching action for aarm, shutdown or contro is verified. Dimensions Product Specifications Pressure Range TC (TruCheck) *0 to 100 psi MC (Manua Check) 0 psi (vented to atmosphere) * *Maximum pressure for entire eve sensing assemby is 100 psi with TruCheck instaed. CUSTOMER SPECIFIED DIMENSION PROCESS CONNECTION 21/2 NPTM OR 4" 150# FLANGE (NOT SHON) 316 SST CABLE HANDLE Temperature Range 40 to 300 F ( 40 to 150 C) etted Parts Ba Sea Spring Body Chrome Pated Brass Tefon Spring Stee 1018 Stee Design and specifications are subject to change without notice. For atest revision, see DISPLACER Drawing Reset Form SORInc.com Registered Quaity System to ISO /60

56 Leve Switches ASTM Materia Designations SOR uses a ASTM grade materias in the construction of mechanica eve switches. The foowing chart ists the specific ASTM (or UNS) materias that are normay used for each component in our switches. Consut the factory if you do not see the specific materia required for your appication. Materia ANSI B36.10 ANSI B16.9 ANSI B36.10 ANSI B16.5 Seamess Pipe Butt ed Fitting Screwed/Socket Fitting Fanges Temperature Range Carbon Stee A234PB A105 A F to 800 F 304/304LSS 2 A312T304 A403P304 A182F304 A182F F to 750 F 316/316LSS A312T316 A403P316 A182F316 A182F F to 750 F Low Temperature 2 Carbon Stee 11/4% Chrome 2 1/2% Moy HasteoyC276 2 N10276 Aoy20 2 N08020 A333 Gr. 6 A420PL6 A350LF2 A350LF2 50 F to 700 F A335P11 A234PL11 A182F11 A182F11 20 F to 1100 F B622 1 B366/B564 B366/B564 B366/B F to 800 F B464 1 B366/B962 B366/B462 B366/B F to 800 F Mone N04400 B165 1 B366/B564 B366/B564 B366/B F to 900 F Dupex SS 2 A790 A815 A182F51 A182F51 60 F to 600 F 21/4% Chrome 2 1% Moy 9% Chrome 1% Moy Vanadium A335P22 A335P22 A182F22 A182F22 20 F to 1100 F A335P91 A234P91 A182F91 A182F91 20 F to 1200 F Notes 1. UNS numbers are given in parenthesis for specia aoys. 2. These materias are avaiabe by specia order ony. Fange Face Finishes The most common fange face finishes are shown. SOR standard fange finishes are highighted. Raised Face Fanges (RF) A raisedface fange finishes are given as a range. AARH (Average Arithmetic Root Height) vaues are given with their metric equivaent. AARH (µin.) Ra (µm) Ring Tight Joint Fanges (RTJ) The side surfaces of RTJ gasket surfaces sha not exceed 63µ (1.6µm) roughness per ANSI B /60 Registered Quaity System to ISO SORInc.com

57 Leve Switches Specific Gravity of ater The specific gravity of water changes depending on its temperature and pressure. The chart beow ists properties of saturated steam. Saturated steam is the state where water is in transition between iquid and vapor. The chart provides the process temperature with the associated pressure and specific gravity of the condensate water. If a water appication has a high temperature and ow pressure, condensate wi ony be present at the temperature that corresponds to the maximum pressure. Seect the proper row based on the temperature and pressure, and read the specific gravity. Figures are based on saturated steam. Boiing Temperature F Vacuum Inches Hg Specific Gravity Boiing Temperature F Pressure psig Specific Gravity Boiing Temperature F Pressure psig Specific Gravity SORInc.com Registered Quaity System to ISO /60

58 Leve Switches Conversions Genera EngishtoMetric unit conversions are isted beow. Pressure To Convert from: To: Use this formua: Bar Pounds per Square Inch (psi) bar x = psi Kio Pascas (kpa) Pounds per Square Inch (psi) kpa x = psi Mega Pascas (MPa) Pounds per Square Inch (psi) MPa x 145 = psi Kiograms per cm 2 (kg/cm 2 ) Pounds per Square Inch (psi) kg/cm 2 x = psi Pounds per Square Inch (psi) Bar psi = bar Pounds per Square Inch (psi) Kio Pascas (kpa) psi = kpa Pounds per Square Inch (psi) Mega Pascas (MPa) psi 145 = MPa Pounds per Square Inch (psi) Kiograms per cm 2 (kg/cm 2 ) psi = kg/cm 2 Specific Gravity To Convert from: To: Use this formua: Kiograms per meter 3 (kg/m 3 ) Specific Gravity (SG) kg/m 3 x = SG Pounds per foot 3 (b/ft 3 ) Specific Gravity (SG) b/ft = SG Degrees API Specific Gravity (SG) (API ) = SG Specific Gravity (SG) Kiograms per meter 3 (kg/m 3 ) SG x 1000 = kg/m 3 Specific Gravity (SG) Pounds per foot 3 (b/ft 3 ) SG x 62.4 = b/ft 3 Specific Gravity (SG) Degrees API (141.5 SG) = API Length To Convert from: To: Use this formua: miimeters (mm) Inches (in.) mm 25.4 = in. meters (m) Feet (ft.) m x = ft. Inches (in.) miimeters (mm) in. x 25.4 = mm Feet (ft.) meters (m) ft = m Temperature To Convert from: To: Use this formua: Degrees Fahrenheit ( F) Degrees Centigrade ( C) ( F 32) 1.8 = C Degrees Centigrade ( C) Degrees Fahrenheit ( F) (1.8 x C) + 32 = F Fuid Fow Rates To Convert from: To: Use this formua: Feet per Second (FPS) Gaons per Minute (GPM) FPS x x A1 = GPM Kiograms per Hour (kg/h) Gaons per Minute (GPM) (kg/h kg/m 3 ) x = GPM Meters per Second (m/s) Gaons per Minute (GPM) m/s x A2 x 15,852 = GPM Cubic meters per Hour (m 3 /hr) Gaons per Minute (GPM) m 3 /hr = GPM Gaons per Minute (GPM) Feet per Second (FPS) GPM ( x A1) = FPS Gaons per Minute (GPM) Kiograms per Hour (kg/h) GPM x kg/m = kg/h Gaons per Minute (GPM) Meters per Second (m/s) GPM (A2 x 15,852) = m/s Gaons per Minute (GPM) Cubic meters per Hour (m 3 /hr) GPM 4.4 = m 3 /hr Variabes: A1 = Area of pipe in square feet (ft 2 ) A2 = Area of pipe in square meters (m 2 ) kg/m 3 = Specific gravity in kiograms/cubic meter 58/60 Registered Quaity System to ISO SORInc.com

59 Leve Switches eights The approximate shipping weights shown beow are for standard modes. eights wi vary based on pipe size, ength and fange size. Consut the factory for the weight of a specific unit. Foats Dispacers Mode pounds kiograms Page Mode pounds kiograms Page 101* 102* 103* * 121* 122* 123* 124* 201* 202* 203* 204* 205* 206* 207* * 221* * 741* 742* 743* *Add weights from the tabe beow to the base mode weight for VV, VVT, or VH configurations with fanges VV, VVT and VH Additiona eights Size 150# 300# 600# pounds kiograms pounds kiograms pounds kiograms / eights shown in this tabe incude two fanges, pipe nippes, and fittings. Note: Consut the factory for additiona weight due to accessories or nonstandard requirements. SORInc.com Registered Quaity System to ISO /60

60 SOR Inc. Lenexa, KS USA Fax SORInc.com REGIONAL OFFICES China SOR China Beijing, China +86 (10) Fax +86 (10) Midde East SOR Measurement & Contro Equipment Trading JLT Dubai, UAE Fax /60 Registered Quaity System to ISO SORInc.com