Industrial: Flare Fittings

Size: px
Start display at page:

Download "Industrial: Flare Fittings"

Transcription

1 Industria: Fare Fittings SAE 45 Fare Resists echanica Pu-out eets SAE Functiona Requirements Resists Vibration U isted Inverted Fare Stee ut option Economica U isted Access Vaves Finger Tight Quick Sea Cap achined to ARI Standards Tefon Sea on Vave core

2 Industria: Fare Fittings 48F ae Connector 145F Branch Tee 149F-249F ae Ebow 151F Run Tee 159F-259F 45 ae Ebow 256F Adapter Tee Fare to ae PT p. H7 p. H8 p. H8 p. H9 p. H9 p. H10 48IFH ae Connector 245IFH Branch Tee 249IFH-249IF ae Ebow 251IFH Run Tee 259IFH 45 ae Ebow AVU1 ae Connector AVE1 ae Ebow p. H12 p. H13 p. H13 p. H13 p. H13 p. H15 p. H15 AVT3 Run Tee AVC1 Cross Fare to Straight Thread 485F ae Connector 1495F ae Ebow 1595F 45 ae Ebow AVUIFI ae Connector p. H15 p. H15 p. H7 p. H9 p. H10 p. H15 Fare to etric Straight Thread 48F-X-IX ae Connector 149F-X-IX ae Ebow 159F-X-IX 45 ae Ebow Fare to Soder US5 Fare Adapter 43F Connector p. H7 p. H9 p. H10 p. H5 p. H6 AVUSE Extended Copper Tube AVTS Soder Tee AVTS Extended Soder Tee AVUS3 3 Way Soder AVUS Soder Connector Fare to Femae PT 46F Femae Connector p. H15 p. H15 p. H15 p. H16 p. H16 p. H7 150F Femae Ebow 166FSV Swive Ebow 46IFH Femae Connector 250IFH Femae Ebow 252IFH Branch Tee 14FSV Swive ut Connector Fare to Fare p. H9 p. H10 p. H12 p. H13 p. H13 p. H5 42F Union 144F-244F Union Tee 147F Cross 155F Union Ebow 660FH Union 42IFH Union 244IFH Union Tee p. H6 p. H8 p. H8 p. H9 p. H10 p. H12 p. H12 255IFH Branch Tee AVU2 Union AVT2 Union Tee AVCS4 Cross AVUR3 Femae Connector AVUS4 Swive Connector AVTS4 Run Tee p. H13 p. H15 p. H15 p. H16 p. H16 p. H16 p. H16 H2

3 Industria: Fare Fittings AVTS6 Branch Tee AVU2BH Bukhead Union AVUS3BH Bukhead Union 1F Refrigerant rum 661FH Reducer Bukhead Union Adapter p. H16 p. H15 p. H15 p. H5 p. H10 664FH Femae Fare - Pipe 88AC Refrigerant Adapter 880AC Refrigerant Adapter 881AC Refrigerant Adapter 2GF Fare Gasket 3GF Sea Bonnet Auxiiary Component p. H10 p. H16 p. H16 p. H16 p. H5 p. H5 14F ong forged ut 14FSX Short Forged ut 41F ong ut 41FS Short ut 639F Sea Pug 640F Cap ut 41IF Inverted Fare ut p. H5 p. H5 p. H6 p. H6 p. H10 p. H10 p. H12 41IFS Inverted Fare ut Stee 41IFF Inverted Fare Pioted ut 640QSF Sea Cap 640QSFCR Sea Cap with Core Remover CR Core Remover VC Vave Core p. H12 p. H12 p. H16 p. H16 p. H16 p. H16 H3

4 45 Fare Fittings aterias of Construction bodies: uts: o-rings: BRASS BRASS viton omencature Exampe: 149f (2) 49 F Attribute: FORGIG (1) EXTRUSIO (2) FARE TO EXTERA PIPE, 90 ebow FARE FITTIG 6 3/8 o.d.. 4 1/4 Appicabe Tube Tube ATERIA: Tube O..: Copper, brass, auminum, weded STEE hyrauic tubing that CA be fared. 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 7/8 PSI TEPERATURE Range Pressure range Tube O.. (in.) Specifications From -65 to +250 F Tube Wa (in.) / / / / / / / /4.035 Economica fitting that resists mechanica puout. Can be assembed and disassembed repeatedy. isted with Underwriter s aboratories for fammabe iquid, marine and gas appications. eets functiona requirements of SAE J512 and J513. Assemby Instructions 1. Cut tubing squarey and cean end thoroughy to remove burrs. 2. Pace nut onto. Pace ed end of nut toward end of. 3. Fare end with faring too to provide 45 fare. 4. Camp fare between nut and nose of fitting body by screwing nut on finger-tight. Tighten with a wrench an additiona 1/4 to 1/2 turn past finger tight for a meta-to-meta sea. Fare fittings are easy to disassembe and may be reassembed repeatedy, for a eak-proof connection. Operating Fuid: ote: Water, air, inert and non-cobustibe GASSES, fammabe iquid, Freon, For other types of fuid or GASSES, PEASE cosut FACTory H4

5 45 Fare Fittings Refrigerant rum Adapter 1F Ref. SAE O.. fow 1F-4-8 1/4 1/2 1-1/ F-4-12* 1/4 3/4 1-1/ F-6-12* 3/8 3/4 1-1/ F-8-12* 1/2 3/4 1-1/ Gasket Furnished with each 1F adapter Short Forged ut 14FSX Ref. SAE d 14FSX-4 1/4 7/ / FSX-5 5/16 1/ / FSX-6 3/8 5/ / FSX-8 1/2 3/ / FSX-10 5/8 7/ / FSX-12 3/4 1-1/ / Copper Fare Gasket 2GF Ref. SAE a 2GF-3 3/ GF-4 1/4.36 2GF-5 5/ GF-6 3/8.56 2GF-8 1/2.67 2GF-10 5/8.78 2GF-12 3/4.97 A Short Forged Reducing uts 14FS d 14FS-6-4 3/8 to 1/4 5/ / FS-8-6 1/2 to 3/8 3/ / FS /8 to 1/2 7/ / Sea Bonnet 3GF Ref. SAE a 3GF-3 3/ GF-4 1/4.37 3GF-5 5/ GF-6 3/8.56 3GF-8 1/2.67 3GF-10 5/ A Swive ut Vave Connector 14FSV Ref. SAE in. 14FSV-4 1/4 7/ / FSV-6 3/8 5/ / FSV-8 1/2 3/ / FSV-10 5/8 7/ / GF-12 3/4.97 C Hex ong Forged ut 14F Ref. SAE d 14F-4 1/4 7/ / F-6 3/8 5/ / F-8 1/2 3/ / Fare Adapter US5 US5-4 1/4 7/ / US5-6 3/8 5/ / US5-8 1/2 3/ / US5-10 5/8 7/ / F-10 5/8 7/ / H5

6 45 Fare Fittings ong ut 41F Ref. SAE d 41F-2 1/8 5/ / F-3 3/16 3/8-24 7/ F-4 1/4 7/ / F-5 5/16 1/2-20 5/ F-6 3/8 5/8-18 3/ F-8 1/2 3/4-16 7/ F-10 5/8 7/ / F-12 3/4 1-1/ / Union 42F Ref. SAE *Thread ProtectoRS 42F-2 1/8 5/ / F-3 3/16 3/8-24 3/ F-4 1/4 7/ / F-5 5/16 1/2-20 1/ F-6 3/8 5/8-18 5/ F-8 1/2 3/4-16 3/ F-10 5/8 7/8-14 7/ F-12* 3/4 1-1/ / F-14* 7/8 1-1/ / Short ut 41FS / Shorter ut 41FX Ref. SAE d 41FS-2 1/8 5/ / FS-3 3/16 3/8-24 7/ FS-4 1/4 7/ / FS-5 5/16 1/2-20 5/ FS-6 3/8 5/8-18 3/ FX-6 3/8 5/8-18 3/ FS-8 1/2 3/4-16 7/ FX-8 1/2 3/4-16 7/ FS-10 5/8 7/ / FX-10 5/8 7/ / FX-12 3/4 1-1/ / FS-12 3/4 1-1/ / FS-14 7/8 1-1/ / Union Reducers 42F Ref. SAE Fare to Soder 43F Ref. SAE c hex fow dia. d1 fow dia. d2 42F-6-4 1/4 3/8 7/ /8-18 5/ F-6-5 5/16 3/8 1/2-20 5/8-18 5/ F-8-4 1/4 1/2 7/ /4-16 3/ F-8-6 3/8 1/2 5/8-18 3/4-16 3/ F /8 5/8 5/8-18 7/8-14 7/ F /2 5/8 3/4-16 7/8-14 7/ SOER O fow dia. 43F-4-4 1/4 1/4 7/ / F-4-5 1/4 5/16 7/ / F-4-6 1/4 3/8 7/ / F-6-4 3/8 1/4 5/8-18 5/ F-6-5 3/8 5/16 5/8-18 5/ F-6-6 3/8 3/8 5/8-18 5/ F-6-8 3/8 1/2 5/8-18 5/ F /8 5/8 5/8-18 3/ F-8-6 1/2 3/8 3/4-16 3/ F-8-8 1/2 1/2 3/4-16 3/ F /2 5/8 3/4-16 3/ F /8 1/2 7/8-14 7/ F /8 5/8 7/8-14 7/ F-10-12* 5/8 3/4 7/8-14 7/ F-12-12* 3/4 3/4 1-1/ / F-12-14* 3/4 7/8 1-1/ / *Comes standard with protectors H6

7 45 Fare Fittings Femae Connector 46F Ref. SAE fow 46F-2-2 1/8 1/8 5/ / F-3-2 3/16 1/8 3/8-24 9/ F-4-2 1/4 1/8 7/ / F-4-4 1/4 1/4 7/ / F-4-6 1/4 3/8 7/ / F-5-2 5/16 1/8 1/2-20 9/ F-5-4 5/16 1/4 1/ / F-6-2 3/8 1/8 5/8-18 5/ F-6-4 3/8 1/4 5/ / F-6-6 3/8 3/8 5/ / F-6-8 3/8 1/2 5/ F-8-4 1/2 1/4 3/4-16 3/ F-8-6 1/2 3/8 3/ / F-8-8 1/2 1/2 3/ F-8-12* 1/2 3/4 3/ / F /8 3/8 7/8-14 7/ F /8 1/2 7/ F-10-12* 5/8 3/4 7/ / ae Connector 48F Ref. SAE fow 48F-2-2 1/8 1/8 5/ / F-3-2 3/16 1/8 3/8-24 7/ F-3-4 3/16 1/4 3/8-24 9/ F-4-2 1/4 1/8 7/ / F-4-4 1/4 1/4 7/ / F-4-6 1/4 3/8 7/ / F-4-8 1/4 1/2 7/ / F-5-2 5/16 1/8 1/2-20 1/ F-5-4 5/16 1/4 1/2-20 9/ F-5-6 5/16 3/8 1/ / F-6-2 3/8 1/8 5/8-18 5/ F-6-4 3/8 1/4 5/8-18 5/ F-6-6 3/8 3/8 5/ / F-6-8 3/8 1/2 5/8-18 7/ F-6-12* 3/8 3/4 5/ / F-8-4 1/2 1/4 3/4-16 3/ F-8-6 1/2 3/8 3/4-16 3/ F-8-8 1/2 1/2 3/4-16 7/ F /2 3/4 3/ / F /8 1/4 7/8-14 7/ F /8 3/8 7/8-14 7/ F /8 1/2 7/8-14 7/ F-10-12* 5/8 3/4 7/ / F-12-8* 3/4 1/2 1-1/ / F-12-12* 3/4 3/4 1-1/ / F-14-12* 7/8 3/4 1-1/ / Fare to etric Adaptor 48F-X-IX Hex Part umber etric Thread HEX 48F-8-II6 1/2 16 X 1.5 3/4-16 7/ F-10-I27 5/8 27 x 2.0 7/ / F-12-I27* 3/4 27 x / / ote: Fuorocarbon o-ring is standard *Comes standard with protectors Fare to SAE Straight Thread 485F PART O. TUBE SIZE STRAIGHT THREA STRAIGHT HEX Fuorocarbon O-Ring Hex FOW IA. 485F-12-8* 3/4 3/ / / F-12-12* 3/4 1 1/ / / H7

8 45 Fare Fittings 144F 149F Union Tee 144F-244F Ref. SAE m fow 144F-3 3/16 3/ F-4 1/4 7/ F-4 1/4 7/ F-5 5/16 1/ F-6 3/8 5/ F-8 1/2 3/ F-10 5/8 7/ Union Tee 144F combination s ae Branch Tee 145F Ref. SAE F m m1 m n fow 145F-2-2 1/8 1/8 5/ F-4-2 1/4 1/8 7/ F-4-4 1/4 1/4 7/ F-5-4 5/16 1/4 1/ F-6-4 3/8 1/4 5/ F-6-6 3/8 3/8 5/ F-6-8 3/8 1/2 5/ F-8-6 1/2 3/8 3/ F-8-8 1/2 1/2 3/ F /8 1/2 7/ fow 144F /8 3/8 1/ F /2 1/2 3/ ae Ebow 149F-249F Ref. SAE F m n fow 149F-2-2 1/8 1/8 5/ F-3-2 3/16 1/8 3/ F-3-2 3/16 1/8 3/ F-4-2 1/4 1/8 7/ F-4-2 1/4 1/8 7/ F-4-4 1/4 1/4 7/ F-4-4 1/4 1/4 7/ F-4-6 1/4 3/8 7/ F-4-6 1/4 3/8 7/ F-4-8 1/4 1/2 7/ F-5-2 5/16 1/8 1/ F-5-2 5/16 1/8 1/ F-5-4 5/16 1/4 1/ F-5-4 5/16 1/4 1/ F-5-6 5/16 3/8 1/ F /8 1/8 5/ F /8 1/8 5/ F-6-4 3/8 1/4 5/ F-6-4 3/8 1/4 5/ F-6-6 3/8 3/8 5/ F-6-6 3/8 3/8 5/ F-6-8 3/8 1/2 5/ F-6-8 3/8 1/2 5/ F-6-12* 3/8 3/4 5/ F /2 1/4 3/ F-8-6 1/2 3/8 3/ F-8-6 1/2 3/8 3/ F-8-8 1/2 1/2 3/ F-8-8 1/2 1/2 3/ F-8-12* 1/2 3/4 3/ F /8 1/4 7/ F /8 3/8 7/ F /8 1/2 7/ F /8 1/2 7/ F-10-12* 5/8 3/4 7/ Cross 147F Ref. SAE F-12-8* + 3/4 1/2 1-1/ F-12-12* 3/4 3/4 1-1/ F-14-12* 7/8 3/4 1-1/ m fow + For these parts the through hoe is smaer than the through hoe on the fare end. 147F-6 3/8 5/ *Comes standard with protectors H8

9 45 Fare Fittings Fare Ebow to SAE etric Straight Thread 149F-X-IX Part umber Tube Size etric Thread 1 m n 1 149F-10-I27 5/8 27 x 2.0 7/ ote: Fuorocarbon o-ring is standard Union Ebow 155F Ref. SAE m fow 155F-2 1/8 5/ F-3 3/16 3/ F-4 1/4 7/ F-5 5/16 1/ F-6 3/8 5/ Fare Ebow to SAE Straight Thread 1495F PART O. TUBE SIZE STRAIGHT THREA HEX Hex FOW IA. 1495F-12-8* 3/4 3/ / / F-12-12* 3/4 1-1/ / / F-8 1/2 3/ F-10 5/8 7/ F-12* 3/4 1-1/ F ote: Fuorocarbon o-ring is standard Femae Ebow 150F Ref. SAE m n fow 45 Ebow 159F-259F Ref. SAE F 150F-4-2 1/4 1/8 7/ F-4-4 1/4 1/4 7/ F-5-4 5/16 1/4 1/ F-6-2 3/8 1/8 5/ F-6-4 3/8 1/4 5/ F-6-6 3//8 3/8 5/ F-6-8 3/8 1/2 5/ F-8-6 1/2 3/8 3/ F-8-8 1/2 1/2 3/ F /2 3/4 3/ F-10-8* 5/8 1/2 7/ F-10-12* 5/8 3/4 7/ m n fow 159F-4-2 1/4 1/8 7/ F-4-2 1/4 1/8 7/ F-4-4 1/4 1/4 7/ F-4-4 1/4 1/4 7/ F-5-2 5/16 1/8 1/ F-5-4 5/16 1/4 1/ F /8 1/8 5/ F-6-4 3/8 1/4 5/ F-6-4 3/8 1/4 5/ F-6-6 3/8 3/8 5/ F-6-6 3/8 3/8 5/ F /2 1/4 3/ F-8-6 1/2 3/8 3/ F-8-6 1/2 3/8 3/ ae Run Tee 151F Ref. SAE m n fow 159F-8-8 1/2 1/2 3/ F /8 3/8 7/ F /8 1/2 7/ F-12-8* + 3/4 1/2 1-1/ F-4-2 1/4 1/8 7/ For these parts the through hoe is smaer than the through hoe on the fare end. 151F-4-4 1/4 1/4 7/ F-5-4 5/16 1/4 1/ F-6-4 3/8 1/4 5/ F-6-6 3/8 3/8 5/ F-6-8 3/8 1/2 5/ F-8-6 1/2 3/8 3/ F-8-8 1/2 1/2 3/ F /8 1/2 7/ *Comes standard with protectors H9

10 45 Fare Fittings 45 Fare Ebow to SAE etric Straight Thread 159F-X-IX Part umber TUBE SIZE etric Thread STRAIGHT THREA HEX 159F-8-II6 1/2 16 X 1.5 3/ mm F-10-I27 5/8 27 x 2.0 7/ / ote: Fuorocarbon o-ring is standard Hex Cap ut 640F Ref. SAE F-3 3/16 3/8-24 1/ F-4 1/4 7/ / F-5 5/16 1/2-20 5/ F-6 3/8 5/8-18 3/ F-8 1/2 3/4-16 7/ F-10 5/8 7/ / Fare to SAE Straight Thread 1595F PART O. TUBE SIZE STRAIGHT THREA STRAIGHT THREA HEX FOW IA. 1595F-8-8 1/2 3/4-16 3/4-16 7/ F-12-8* 3/4 3/ / / F-12-12* 3/4 1 1/ / / ote: Fuorocarbon o-ring is standard Hex Fared Union Femae Fare to Femae Fare 660FH Ref. SAE fow 660FH-4 1/4 7/ / FH-6 3/8 5/ / FH-8 1/2 3/ / fhd-10 5/8 7/ / Swive Ebow 166FSV m n C Hex fow 166FSV-4-4 1/4 7/ / FSV-6-6 3/8 5/8-18 3/ ae Fare to Femae Fare 661FH Ref. SAE FSV-8-8 1/2 3/4-16 7/ FSV /8 7/ FSV-12-12* 3/4 1-1/ / fow dia. d 661FH-4-6 1/4 3/8 7/ / / FH-4-8 1/4 1/2 7/ / / FH-6-4 3/8 1/4 5/8-18 7/ / FH-6-8 3/8 1/2 5/8-18 3/ / FH-8-6 1/2 3/8 3/4-16 5/ / Adapter Tee 256F m n n1 fow 661FH /2 5/8 3/4-16 7/ / FH /8 1/2 7/8-14 3/ / fhd-10-12* 5/8 3/4 7/ / / F-4-2 1/4 1/8 7/ fhd-12-10* 3/4 5/8 1-1/ / / Fared Sea Pug 639F Ref. SAE F-4 1/4 7/ /16.69 Femae Fare to ae Pipe Thread 664FH Ref. SAE fow 639F-5 5/16 1/2-20 1/ F-6 3/8 5/8-18 5/ F-8 1/2 3/4-16 3/ F-10 5/8 7/8-14 7/ FH-4-2 1/4 1/8 7/ / FH-4-4 1/4 1/4 7/ / FH-6-4 3/8 1/4 5/ / FH-8-6 1/2 3/8 3/ / *Comes standard with protectors Shoud be used with 2GF fare gasket H10

11 Inverted Fared Fittings aterias of Construction FITTIGS: uts: BRASS BRASS and Zinc ChroATE Stee omencature Exampe: 48ifhd-4-2 Attribute: 48 haf union if hd IVERTE fare HEAVy duty 6 3/8 o.d.. 4 1/4 Appicabe Tube Tube ATERIA: Tube O..: Copper, brass, auminum, weded STEE hyrauic tubing that CA be fared. 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4 Pressure range PSI TEPERATURE Range Tube O.. (in.) Specifications From -65 to +250 F Tube Wa (in.) / / / / / / / /4.035 Buit to resist mechanica puout this fitting can be assembed and disassembed repeatedy. isted with Underwriter s aboratories for fammabe iquid and gas. eets functiona requirements of SAE J512. Assemby Instructions 1. Cut tubing squarey and cean end thoroughy to remove burrs. 2. Pace nut onto. Pace ed end of nut toward end of. 3. On thin wa copper, weded or brazed tubing, use doube fare to prevent pinch-off or cracked fares. 4. Camp fare between nut and fare seat of body by screwing nut on finger-tight. Tighten with a wrench an additiona 1/4 turn for a meta-to-meta sea. ote: The seat dimensions are predicated on practica ing imitations and use of these fittings with doube fared tubing. Operating Fuid: ote: Water, Air, IERT and non-cobustibe GASSES copatibe WITH ATERIAS of costruction For other types of fuids or GASSES, PEASE cosut FACTory H11

12 Inverted Fared Fittings ut 41IF Ref. SAE Part c o. hex d 41IF-2 1/8 5/ / IF-3 3/16 3/8-24 3/ IF-4 1/4 7/ / IF-5 5/16 1/2-20 1/ IF-6 3/8 5/8-18 5/ IF-8 1/2 3/4-18 3/ Femae Connector 46IFH Ref. SAE Part o. c hex fow 46IFH-3-2 3/16 1/8 3/8-24 1/ IFH-4-2 1/4 1/8 7/ / IFH-5-2 5/16 1/8 1/ / IFH-6-4 3/8 1/4 5/8-18 3/ IFH-8-6 1/2 3/8 3/ / Stee ut Zinc Chromate 41IFS Ref. SAE d 41IFS-3 3/16 3/8-24 3/ IFS-4 1/4 7/ / IFS-5 5/16 1/2-20 1/ IFS-6 3/8 5/8-18 5/ IFS-8 1/2 3/4-18 3/ IFS-10 5/8 7/8-18 7/ IFS-12 3/4 1-1/ / ae Connector 48IFH Ref. SAE fow 48IFH-2-2 1/8 1/8 5/ / IFH-3-2 3/16 1/8 3/ / IFH-4-2 1/4 1/8 7/ / IFH-4-4 1/4 1/4 7/ / IFH-5-2 5/16 1/8 1/ / IFH-5-4 5/16 1/4 1/ / IFH-6-2 3/8 1/8 5/8-18 3/ IFH-6-4 3/8 1/4 5/8-18 3/ IFH-6-6 3/8 3/8 5/8-18 3/ IFH-8-4 1/2 1/4 3/ / IFH-8-6 1/2 3/8 3/ / Pioted ut 41IFF for Singe Fared Tubing Ref. SAE IFH-8-8 1/2 1/2 3/ / IFH /8 1/2 7/ / IFH /4 3/4 1-1/ / d 41IFF-2 1/8 5/ / IFF-3 3/16 3/8-24 3/ IFF-4 1/4 7/ / IFF-5 5/16 1/2-20 1/ IFF-6 3/8 5/8-18 5/ IFF-8 1/2 3/4-18 3/ Union Tee 244IFH Ref. SAE fow 244IFH-3 3/16 3/ IFH-4 1/4 7/ Union 42IFH Ref. SAE IFH-5 5/16 1/ IFH-6 3/8 5/ IFH-8* 1/2 3/ *oes not meet U or SAE. 42IFH-2 1/8 5/ / IFH-3 3/16 3/ / IFH-4 1/4 7/ / IFH-5 5/16 1/ / IFH-6 3/8 5/8-18 3/ IFH-8 1/2 3/ / H12

13 Inverted Fared Fittings ae Branch Tee 245IFH Ref. SAE fow 245IFH-4-2 1/4 1/8 7/ IFH-6-4 3/8 1/4 5/ Femae Ebow 250IFH Ref. SAE m n fow 250IFH-3-2 3/16 1/8 3/ IFH-4-2 1/4 1/8 7/ IFH-5-2 5/16 1/8 1/ IFH-6-4 3/8 1/4 5/ ae Ebow 249IFH 249IF Ref. SAE ae Run Tee 251IFH Ref. SAE fow STraight m m1 n fow 249IFH-2-2 1/8 1/8 5/ IFH-3-2 3/16 1/8 3/ IFH-4-2 1/4 1/8 7/ IFH-3-2 3/16 1/8 3/ IFH-5-2 5/16 1/8 1/ IFH-6-4 3/8 1/4 5/ IFH-4-4 1/4 1/4 7/ IFH-5-4 5/16 1/4 1/ IFH-6-2 3/8 1/8 5/ IF-6-4 3/8 1/4 5/ IFH-6-4 3/8 1/4 5/ IFH-6-6 3/8 3/8 5/ IFH-8-4 1/2 1/4 3/ IF /2 3/8 3/ IFH-8-6 1/2 3/8 3/ IFH-8-8 1/2 1/2 3/ Femae Branch Tee 252IFH Ref. SAE m n fow 252IFH-5-2 5/16 1/8 1/ IFH-6-4 3/8 1/4 5/ IFH /8 3/8 7/ IFH /8 1/2 7/ ight uty Series Union Ebow 255IFH m fow 255IFH-4 1/4 7/ Ebow 259IFH Ref. SAE fow 259IFH-3-2 3/16 1/8 3/ / IFH-4-2 1/4 1/8 7/ / IFH-5-2 5/16 1/8 1/2-20 5/ IFH-5-4 5/16 1/4 1/2-20 5/ IFH-6-4* 3/8 1/4 5/ / IFH-8-6 1/2 3/8 3/4-18 7/ IFH /8 1/2 7/ / *oes not meet SAE or u H13

14 Access Vaves aterias of Construction Straight Bodies: Shape Bodies: CA360, CA345 CA377 omencature Exampe: XAVT1-2 X AV T1 Attribute: PACkaged Access Vave ae Branch Tee -2 1/8 Pipe Thread Specifications Pressure range: TEPERATURE Ranges: Operating Fuid: Up to 500 PSI -20 to +220 F ForoCARBon refrigerants Vave Core: eets ARI STAAR 720 esigned to offer convenient ow cost access ports for refrigeration service. A fittings feature 1/4 SAE mae fare access ports and are furnished with a finger tight quick sea cap. Access vaves with connections have interna OS soder cups. Access vave products with a soder cup are shipped with the vave core oose. Vave cores shoud be torqued after brazing to ARI 720 Standard. Access Vaves may be instaed in any position on either high or ow side for quick testing, pressure checking, purging or charging. H14

15 Access Vaves Extended Copper Tube AVUSE AVUSE-2 AVUSE-3 AVUSE-4 AVUSE-5 AVUSE-6 AVUSE-8 AVUSE-9 AVUSE-11 Connection 1/8 O.. Tube 3/16 O.. Tube 1/4 O.. Tube 5/16 O.. Tube 3/8 O.. Tube 1/2 O.. Tube 1/8 O.. Tube; AITIona STEPS on body for 3/16, 1/4, 5/16, 3/8 O.. Tube. 3/16, 1/4, or 5/16 Soder FITTIG/SWAGE Tube. 3/16 O.. Tube; AITIona STEPS on body for 1/4 or 3/8 Soder FITTIGS/SWAGE Tubes 5/16 O.. Tube. Forged Union Tee AVT2 AVT2-4 ae Connector AVU1 AVU1-2 AVU1-4 Connection 1/4" Access A Ends WITH 2 Forged Fare uts and One Core and Cap Connection 1/8" ae Pipe or 1/4" O.. Soder 1/4" ae Pipe or 5/16" O.. Soder Product comes with vave core oose and shoud be torqued after brazing to ARI 720 standard. Product comes with vave core oose and shoud be torqued after brazing to ARI 720 standard. Access Vave Assemby AVUIFI Connection AVUIFI-4 7/16-20 SAE Straight O-Ring PoRT Soder Tee AVTS Connection AVTS-4 1/4 O.. Tube or 3/8 Soder FITTIG/SWAGE Tube AVTS-5 5/16 O.. Tube or 3/8 Soder FITTIG/SWAGE Tube AVTS-6 3/8 O.. Tube or 1/2 Soder FITTIG/SWAGE Tube AVTS-8 1/2 O.. Tube Product comes with vave core oose and shoud be torqued after brazing to ARI 720 standard. ote: Standard o-ring is neoprene. Consut Brass Products ivision for optiona o-rings Forged ae Ebow AVE1 Connection AVE1-2 1/8" ae Pipe or 1/4" O.. Soder Product comes with vave core oose and shoud be torqued after brazing to ARI 720 standard. Extended Soder Tee AVTS Connection AVTS-6 3/8 O.. Tube/Soder 5/16, 3/8 & 7/16 Tube Product comes with vave core oose and shoud be torqued after brazing to ARI 720 standard. Forged ae Run Tee AVT3 AVT3-2 AVT3-4 Connection 1/8" ae Pipe or 1/4" O.. Soder on Run x 1/4" Access on Run and Branch WITH One Core and Cap 1/4" ae Pipe or 5/16" O.. Soder on Run x 1/4" Access on Run and Branch WITH One Core and Cap Product comes with vave core oose and shoud be torqued after brazing to ARI 720 standard. Fu Union AVU2 Connection AVU2-4 1/4 O.. Fare Tube WITH Forged Fare ut Bukhead Union AVU2BH Connection AVU2BH-4 1/4" Bukhead Access X 1/4" SAE WITH Forged ut Forged ae Cross AVC1 AVC1-4 Connection 1/4" ae Pipe or 5/16" O.. Soder x 1/4" Access on a Fare Ends WITH One Core and Cap Product comes with vave core oose and shoud be torqued after brazing to ARI 720 standard. Bukhead Soder Union AVUS3BH AVUS3BH-4 Connection 1/4" Bukhead Access X 3 Way OS Product comes with vave core oose and shoud be torqued after brazing to ARI 720 standard. H15

16 Access Vaves Swive Cross AVCS4-4 AVCS4-4 Connection 1/4" Forged Femae Fare Swive WITH epressor x 1/4" Access on a Fare Ends with One Core and Cap Forged Femae Branch Tee AVTS6 AVTS6-4 AVTS6-4 Connection 1/4" Femae Fare Swive x 1/4" Access on Both Ends 1/4" Femae Fare Swive on Branch with epressor x 1/4" Access on Both Ends Femae Connector AVUR3 AVUR3-4 Connection 1/4" Femae Fare with Copper Gasket 3 Way Soder Connector AVUS3 AVUS3-40 Connection For 3/16" O.. Tube or 1/4" and 3/8" Soder FITTIG/SWAGE Tube Product comes with vave core oose and shoud be torqued after brazing to ARI 720 standard. Quick Sea Caps 640QSF 640QSF-4 640QSF-6 Quick Sea Cap with Core Remover 640QSFCR 640QSFCR-4 Connection 1/4" SAE Sea Cap with Sea Gasket 3/8" SAE Sea Cap with Sea Gasket Connection 1/4" SAE Sea Cap Core Remover with interna Sea Gasket Straight Soder Connector AVUS Connection AVUS-42 1/8" O.. Tube or 1/4" Soder FITTIG/SWAGE Tube AVUS-43 3/16" O.. Tube or 1/4" Soder FITTIG/SWAGE Tube AVUS-44 1/4" O.. Tube or 3/8" Soder FITTIG/SWAGE Tube AVUS-45 5/16" O..Tube or 1/2" Soder FITTIG/SWAGE Tube AVUS-46 3/8" O.. Tube or 1/2" Soder FITTIG/SWAGE Tube Product comes with vave core oose and shoud be torqued after brazing to ARI 720 standard. Core Remover CR Connection CR-001 STAAR Core Remover Vave Cores VC Connection VC-001 REPACEET Vave Cores For a 1/4" Access Vaves Swive Connector AVUS4 Connection AVUS4-4 1/4" Forged Femae Fare Swive ut with epressor Refrigerant adapter 88AC 88AC-8-2 Connection 1/8" mae to SAE J2197 Acme ed mae connector Forged Femae Run Swive Tee AVTS4 AVTS4-4 AVTS4-4 Connection 1/4" Femae Fare Swive x 1/4" Access on Both Run and Branch 1/4" Femae Fare Swive on Run with epressor x 1/4" Access on Both Run and Branch Refrigerant adapter 880AC 880AC-8-4 Connection 1/4" femae SAE fare to SAE J2197 Acme ed mae connector Refrigerant adapter 881AC 881AC-8-4 Connection 1/4" SAE mae fare to SAE J2197 Acme ed femae connector H16

Flare Fittings. The World Standard. SAE 45 Flare. Inverted Flare. Access Valves

Flare Fittings. The World Standard. SAE 45 Flare. Inverted Flare. Access Valves Flare Fittings SA 45 Flare eets SA Functional Requirements Resists Vibration Resists echanical Pull-out U isted Inverted Flare U isted conomical Steel ut option Access Valves Teflon Seal on Valve core

More information

Prestolok. Spark resistant push-in fittings for fluids. Catalogue /UK

Prestolok. Spark resistant push-in fittings for fluids. Catalogue /UK Spark resistant push-in fittings for fuids Cataogue 352-/UK Cataogue 352-/UK Index Straight connectors Mae - BSPT Mae - Metric Mae - BSPT Mae - NPTF F23PB - p. C F2PB - p. C F3PB - p. C FPB - p. C Mae

More information

DK-Lok UHP Fittings. No.09-01(E) May 2017

DK-Lok UHP Fittings. No.09-01(E) May 2017 K-ok UP Fittings No.09-01() May 2017 ean UP Fitting ontents ean Wed Fittings Micro bow WM Micro ee WM Micro ross ee WMX Micro ribow WMB Micro af bow WM Micro Reducing bow WMR Micro Reducing ee WMR 05 05

More information

Compression Style Transportation

Compression Style Transportation Compression Style Transportation Air Brake Fittings eets.o.t. FVSS 571.106 eets SAE J246 & J1131 Reusable Use with Copper Tubing TA Fittings eets.o.t. FVSS 571.106 eets SAE J246 & J1131 Staked in Tube

More information

3-PIECE TUBE ASSEMBLY

3-PIECE TUBE ASSEMBLY 3-PIECE TUBE ASSEMBY STAINESS STEE HIGH PRESSURE 37 TUBE FITTINGS 1/8 TO 2 MEETS SAE STANDARD J514 If necessary, see SAE Standard J514 for a complete list of dimensions. NPT Tapered Pipe Threads meet the

More information

Flat fan nozzles. Nozzle characteristics

Flat fan nozzles. Nozzle characteristics Fat fan nozzes Bet ceaning Coating Steam ceaning Degreasing High pressure ceaning Grave washing Cooing Surface treatment Phosphating Rain curtains Foam contro Foam spraying Lubrication Fiter ceaning ceaning

More information

Our policy is one of continuous research and development. We therefore reserve the right

Our policy is one of continuous research and development. We therefore reserve the right Tubing & Hose Metric Nyon, Poyurethane, Poyester Reinforced PVC, Meta Braided Rubber, Copper, Doube Wa Brazed Stee Avaiabe in a variety of different types to suit a wide range of appications A tubing can

More information

CATALOG 2017 SERIES 1

CATALOG 2017 SERIES 1 CTLOG 2017 SRIS 1 Passon Series 1 Passon Series 1 - The new range of innovative fittings create by Passon, market eaer in esign an manufacture of reiabe fittings for poyethyene pipe systems. Passon Series

More information

INTEGRAL BONNET FORGED NEEDLE VALVES. VN5 Series.

INTEGRAL BONNET FORGED NEEDLE VALVES. VN5 Series. INTEGRA BONNET FORGED NEEDE VAVES VN5 Series www.uniok.com Vaves - VN5 Series Features ressure rating up to 5000psig (340bar) @38 C (00 F) Temperature rating from -53 C(-65 F) to 232 C (450 F) wit standard

More information

CATALOG 2016 SERIES 1

CATALOG 2016 SERIES 1 CTLOG 2016 SRIS 1 Passon Series 1 Passon Series 1 - The new range of innovative fittings create by Passon, market eaer in esign an manufacture of reiabe fittings for poyethyene pipe systems. Passon Series

More information

S.B. 469 for information on GM applications). Both styles are shown in Figure 1. Figure 1

S.B. 469 for information on GM applications). Both styles are shown in Figure 1. Figure 1 NO: 4263132 SERVICE BULLETIN DATE: January X,1993 Supersedes: S.B. 426R dated 11/7/89 SUBJECT: ZERO-CLEARAN CE GOVERNOR WEIGHT RETAINER ASSEMBLIES In June 1988, Stanadyne introduced a zero-cearance Eastomer

More information

Vibra-Lok Fittings. Example: 68 VL V 4 2

Vibra-Lok Fittings. Example: 68 VL V 4 2 Vibra-ok Fittings Advantages Vibra-ok provides a positive reliable seal under vibration conditions, mechanical shock or tube movement. The sleeve cushions the tubing permitting the tube to flex back and

More information

Brass Fittings and Valves

Brass Fittings and Valves Brass Fittings and Valves Catalog 3501E USA January 2004 The World Standard OTSEGO, ICHIGA AKEVIEW, ICHIGA ABIO, IIAA AEASSE, FRACE WARIG FAIURE OR IPROPER SEECTIO OR IPROPER USE OF THE PROUCTS A/OR SYSTES

More information

Service Manual. Clamps for Bolt-on Arms and Turnafork

Service Manual. Clamps for Bolt-on Arms and Turnafork Service Manua Camps for Bot-on Arms and Turnafork Seria Numbers 634448 through 666419 Basic Camps Sideshifting Camps Revoving Camps Turnafork Mode C4T Manua Number 667447 cascade@ Cascade is a registered

More information

Clamping devices. CLAMPEX clamping elements offer new possibilities as a shaft-hub-connection:

Clamping devices. CLAMPEX clamping elements offer new possibilities as a shaft-hub-connection: Keyess camping devices Camping devices Genera description: CLAMPEX are keyess camping devices designed to transmit torque via friction on mating components. These designs produce high transmittabe torque

More information

PRECISION PUMP APPLICATOR

PRECISION PUMP APPLICATOR User s Manua nstaation & Operating nstructions PRECSON PUMP APPLCATOR For Box, Junior, and Custom Appicators For questions and/or product support contact the TW ROCOL North America Customer Service Department

More information

Propane Floor Burnisher Equipment Section II. Parts Manual (70076A) A.L. COOK TECHNOLOGY Burnishers Operator's Manual Page 9

Propane Floor Burnisher Equipment Section II. Parts Manual (70076A) A.L. COOK TECHNOLOGY Burnishers Operator's Manual Page 9 Propane Foor Burnisher Equipment Section II Parts Manua (00A) A.L. COOK TECHNOLOGY Burnishers Operator's Manua Page 9 ", " and " Frame Assemby /99 9B 9 0 9A 9C A B A B 0A 0B 0C 0 C Page 0 A.L. COOK TECHNOLOGY

More information

Manifold Technology.

Manifold Technology. ----------------------------------------------------- 2017.2 Manifod Technoogy. made in Germany I Epkg. unitrything UNDER CONTROL. Manifod Technoogy - I BEULCO heating and cooing manifods made of high-quaity

More information

Polypress Pipes and Fittings

Polypress Pipes and Fittings Poypress Pipes and Fittings Poypress pipes escription Weigt Tecnica data Product code Muti-ayer composite pipe coied PEX-AL-PEX kg/coi 16 x 2.0 x 100m 11.10 16 PP96016400 16 x 2.0 x 200m 22.20 16 PP96016700

More information

Section L Accessories

Section L Accessories Section L Tabe of Contents QuickJet and UniJet Spray Nozze Systems/Components QuickJet Spray Nozze Systems...L2 UniJet Spray Nozze Systems........... L2 Standard QuickJet Bodies...L3 ProMax QuickJet Bodies...L3

More information

Quick Connect Couplings Series ES single shut-off - The ORIGINAL DN 7.2

Quick Connect Couplings Series ES single shut-off - The ORIGINAL DN 7.2 Quick Connect Coupings Series ES singe shut-off - The ORIGINAL Quick Connect Coupings of brass or brass MS 58 nicke-pate New hose barb for safe fit of hose an easy assemby Seeve esign protects the couping

More information

INSTALLATION AND MAINTENANCE MANUAL for ST400-C339 SOLENOID VALVE

INSTALLATION AND MAINTENANCE MANUAL for ST400-C339 SOLENOID VALVE 04666358 Edition 2 February, 1999 INSTALLATION AND MAINTENANCE MANUAL for ST400-C339 SOLENOID VALVE. IMPORTANT SAFETY INFORMATION ENCLOSED. READ THIS MANUAL BEFORE OPERATING VALVE. IT IS THE RESPONSIBILITY

More information

USER INSTRUCTIONS USER INSTRUCTIONS. Innovative Car Alarm. Thatcham M.I.R.R.C. Evaluation No: TC2-1065/0199

USER INSTRUCTIONS USER INSTRUCTIONS. Innovative Car Alarm. Thatcham M.I.R.R.C. Evaluation No: TC2-1065/0199 USER INSTRUCTIONS USER INSTRUCTIONS Innovative Car Aarm Thatcham M.I.R.R.C. Evauation No: TC2-1065/0199 IMPORTANT WARNING The Cobra 7928/26/HF Aarm Immobiiser is a Category 1 MIRRC Thatcham isted security

More information

Tube and Pipe Fitting Master Catalog. Product Focus

Tube and Pipe Fitting Master Catalog. Product Focus Tube and Pipe Fitting aster atalog Product Focus Table of ontents APPIATIO ATA Safety Information 1-2 Visual Quick Reference Index 3-13 umbering Systems 14 Tube Fitting Selector hart 15 Fitting Identification

More information

Innovation. Simplicity. is Simply Better. Rotary Lobe Pumps

Innovation. Simplicity. is Simply Better. Rotary Lobe Pumps Innovation Simpicity is Simpy Better Rotary Lobe Pumps So simpe, yet so diverse. Pease add. Six series with 19 sizes. AL-series PL-series CL-series FL-series EL-series XL-series A pump modes are manufactured

More information

Hi-Duty Flareless Tube Fittings

Hi-Duty Flareless Tube Fittings Hi-uty Flareless Tube Fittings dvantages zfc10 No flaring, soldering or other preparation of tubing is necessary. Pre-assembled brass fitting, with sleeve machined onto nut. This two piece flareless compression

More information

GXL SERIES. DC 2-wire type Micro-size Inductive Proximity Sensor. High performance in micro-size design. Reduced wiring operation. Versatile mounting

GXL SERIES. DC 2-wire type Micro-size Inductive Proximity Sensor. High performance in micro-size design. Reduced wiring operation. Versatile mounting 1 DC -wire Micro-size Inductive Proximity SERIES Reated Information Genera terms and conditions... F- Gossary of terms... P.176~ guide... P.71~ Genera precautions... P.179~ PHOTO PHOTO IGHT FOW PARTICUAR

More information

Nominal Size Average O.D. Average I.D. Inches (mm) Inches (mm) Inches (mm)

Nominal Size Average O.D. Average I.D. Inches (mm) Inches (mm) Inches (mm) The information contained in this section is based on current information and Product design at the time of publication and is subject to change without notification. Our ongoing commitment to product

More information

VDC Series High-Pressure Type Variable Volume Vane Pump

VDC Series High-Pressure Type Variable Volume Vane Pump V SRS PRSSUR TYP VARA VU VA PUP V Series igh-pressure Type Variabe Voume Vane Pump eatures q ighy efficient and stabe high-pressure operation nnovative pressure contro and pressure baance mechanisms combine

More information

Brass Fittings and Valves

Brass Fittings and Valves Brass Fittings and Valves Catalog 3501E USA December 1999 The World Standard WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE

More information

Geberit Mapress. Product Guide and Price List. Valid from 1 May 2017 (Prices exclusive of VAT)

Geberit Mapress. Product Guide and Price List. Valid from 1 May 2017 (Prices exclusive of VAT) eberit Mapress Prouct uie an Price ist Vai from 1 May 2017 (Prices excusive of VAT) eberit Mapress Stainess Stee eberit Mapress Carbon Stee eberit Mapress Copper eberit Pipe Vave Fittings Appenix Swiss

More information

Air nozzles. Air curtains Blowing off and out Cleaning Cooling Drying Reheating Transporting and many others...

Air nozzles. Air curtains Blowing off and out Cleaning Cooling Drying Reheating Transporting and many others... Air nozzes Air curtains Bowing off and out Ceaning Cooing Drying Reheating Transporting and many others Air nozzes As a rue, any fat fan or soid stream nozze can be operated with air instead of iquid However,

More information

CURRIES Tech Manual Door Section. Revised June, 2017

CURRIES Tech Manual Door Section. Revised June, 2017 CURRIES Tech Manual Door Section Revised June, 2017 i Index August, 2016 DESCRIPTION PAGE(S) 2-1/4 Thick Door...137 Astragals Flat...89 h Type...125 Z Type...90 Behavioral Healthcare Patient Room Access

More information

PERFORMANCE AND KNOW-HOW

PERFORMANCE AND KNOW-HOW Linear and Motion Soutions PERFORMANCE AND KNOW-HOW Nadea represents 50 years of neede and cam foower bearing know-how. Our ong history in design and manufacturing has extended over the years to the products

More information

Neoprene. Steel or Brass

Neoprene. Steel or Brass The low air inclusion product line is designed for air conditioning, refrigerant, gaseous and fluid transfer applications. Product Features connections for versatility of installation on tubing or hose

More information

GXL SERIES. DC 2-wire type Micro-size Inductive Proximity Sensor. High performance in micro-size design. Versatile mounting. Reduced wiring operation

GXL SERIES. DC 2-wire type Micro-size Inductive Proximity Sensor. High performance in micro-size design. Versatile mounting. Reduced wiring operation 777 PHOTO PHOTO DC -wire Micro-size Inductive Proximity SERIES Reated Information Genera terms and conditions... F-17 Gossary of terms... P.16~ seection guide... P.77~ Genera precautions... P. Conforming

More information

Aluminium Fixed Blade Return Grilles Series

Aluminium Fixed Blade Return Grilles Series Auminium Fixed Bade Return Gries 4900 Series Auminium Fixed Bade Return Gries Modes 5145H and 51FH Return Gries have fixed horizonta bades (parae to width/first specified dim.) spaced on 19mm centres with

More information

Components for. Overhead Cranes. Sta dard n. Engineered. Hoists. Endtrucks. Crane Kits. Engineered Material Handling

Components for. Overhead Cranes. Sta dard n. Engineered. Hoists. Endtrucks. Crane Kits. Engineered Material Handling Engineered Materia Handing Components for Overhead Cranes Sta dard n Hoists Engineered Hoists Endtrucks Crane Kits Troey drive consists of singe speed squirre-cage gear motors. Integra disc brakes are

More information

Lintra-Lite Actuators Series A44000, Rodless Cylinders Double Acting

Lintra-Lite Actuators Series A44000, Rodless Cylinders Double Acting Section 11 Lintra-Lite Actuators Series A44000, Rodess Cyinders Doube Acting LINTRA -LITE Series A44000 Rodess Cyinders Series A44000 Features...ACT-11-2 Series A44000 Specifications...ACT-11-3 Series

More information

Specializing in DOT Air Brake Parts for Heavy Duty Vehicle 2015 CATALOG 版权所有翻版必究 ALL RIGHTS RESERVED 未经授权禁止转载 UNAUTHORIZED COPY PROHIBIT

Specializing in DOT Air Brake Parts for Heavy Duty Vehicle 2015 CATALOG 版权所有翻版必究 ALL RIGHTS RESERVED 未经授权禁止转载 UNAUTHORIZED COPY PROHIBIT Specializing in OT Air Brake Parts for Heavy uty Vehicle 2015 CATAOG www.justinhardware.com (China mainland) www.justinfitting.com (Taiwan) JIH Table of Content Company Profile -----------------------------------------------------------------------------------

More information

How to Order. Auto switch. Without auto switch (Built-in magnet) Applicable Auto Switches/Refer to p for further details. Indicator.

How to Order. Auto switch. Without auto switch (Built-in magnet) Applicable Auto Switches/Refer to p for further details. Indicator. Compact Side Series MXU How to Order MXU A90V S Compact side Bore size 1 ø ø ø1 1 2 Stroke mm mm 1mm mm 2mm mm Number of auto switches 2 Auto switch S 1 Without auto switch (Buit-in magnet) Appicabe Auto

More information

Mechanical Level Switches

Mechanical Level Switches Mechanica Leve Switches SOR mechanica eve switches are rugged, industria products specificay designed for versatiity of appication. This cataog contains appication and ordering data for foat and dispaceroperated

More information

Hydraulic notching machines

Hydraulic notching machines Notching & punching Hydrauic notching machines MRA Manua pipe notcher XXFor notching pipes up to 4.5 mm wa thickness XXUp to three pipe diameters can e notched (MRA 2) XXCan e used oth horizontay and verticay

More information

Linear Slot Diffusers Series

Linear Slot Diffusers Series Linear Sot iffusers 5000 Series Linear Sot iffusers 5000 Series The Series 5000 Linear Sot Ceiing iffuser has been speciay designed to provide both the unobtrusive appearance required for architectura

More information

Filter Return Grilles. 51F Series Aluminium

Filter Return Grilles. 51F Series Aluminium Fiter Return Gries 51F Series uminium Fiter Return Gries 51F Series uminium The dvanced ir Mode Series 51F Fiter Return Gries are a convenient and economica means of fitering primary return air ocay. They

More information

TD3 Series UNIQUE LIGHTING SOLUTIONS RETROFIT INSTALLATION GUIDE TD3-1-UN-65 TD3-3-UN-65

TD3 Series UNIQUE LIGHTING SOLUTIONS RETROFIT INSTALLATION GUIDE TD3-1-UN-65 TD3-3-UN-65 TD3-1-UN-65 TD3-3-UN-65 RETROFIT INSTALLATION GUIDE UNIQUE LIGHTING SOLUTIONS WARNING Retrofit instaation must ony be performed by a icensed eectrician. To prevent death, injury or damage to property this

More information

Cartridges & Manifolds

Cartridges & Manifolds Cartridges & Manifolds SAE Encapsulated Cartridge Meets Performance Requirements of.o.t. FMVSS 571.106 Meets Proposed imensional Standards of SAE 2494-4 in 6061-T6 Aluminum Eliminate the space and labor

More information

CHECK VALVE P.147 SWING CHECK VALVE P.149 WAFER CHECK VALVE P.151 BALL CHECK VALVE P.153 TRUE UNION BALL CHECK VALVE P.155 BALL FOOT VALVE

CHECK VALVE P.147 SWING CHECK VALVE P.149 WAFER CHECK VALVE P.151 BALL CHECK VALVE P.153 TRUE UNION BALL CHECK VALVE P.155 BALL FOOT VALVE CHECK VAVE P.47 P.49 P.5 P.53 P.55 SWING CHECK VAVE WAFER CHECK VAVE BA CHECK VAVE TRUE UNION BA CHECK VAVE BA FOOT VAVE 45 PERFORMANCE OF SWING CHECK VAVE, BA CHECK VAVE, AND BA FOOT VAVE Min. Pressure

More information

SPECIFICATIONS & INSTALLATION GUIDE ANOTHER QUALITY PRODUCT BY FORZA GLOBAL STAINLESS V PRESS EDITION: 0001

SPECIFICATIONS & INSTALLATION GUIDE ANOTHER QUALITY PRODUCT BY FORZA GLOBAL STAINLESS V PRESS EDITION: 0001 STAINESS V PRESS SPECIFICATIONS & INSTAATION GUIDE ANOTHER QUAITY PRODUCT BY FORA GOBA EDITION: 0001 G O B A World Force In Plumbing Systems Forza Global in partnership with one of the world s leading

More information

HAM-LET PRECISION INSTRUMENT PIPE FITTINGS

HAM-LET PRECISION INSTRUMENT PIPE FITTINGS HAM-E PRECISION INSRUMEN PIPE FIINGS PRECISION INSRUMENAION PIPE FIINGS GENERA HAM-E Group is pleased to introduce its line of Precision Instrument Pipe Fittings. he Pipeline range of connectors is manufactured

More information

Procyon 1. Product # Type Date Project Name Project Location Prepared By. Construction. Optical System. Product Applications. l l l. l l l.

Procyon 1. Product # Type Date Project Name Project Location Prepared By. Construction. Optical System. Product Applications. l l l. l l l. Product # Type Date Project Name Project Location Prepared By Construction Housing is ow copper die-cast auminum, heavy duty, structuray rigid and vibranty dissipating heat for onger umen maintenance ife-hours.

More information

ABOVE GROUND TANKS 66 WATER DIVISION ROTOTEC

ABOVE GROUND TANKS 66 WATER DIVISION ROTOTEC OVE GROUND TNKS 66 WTER DIVISION ROTOTEC WTER DIVISION ROTOTEC 67 VERTICLE From 50 to 10000 itres Instaation Paced directy on a fat supporting surface vaiabe coours: standard on request Ø Cover Inet Outet

More information

atalog /USA otes ontrol omponents 2 Parker Hannifin orporation ivision

atalog /USA otes ontrol omponents 2 Parker Hannifin orporation ivision Section 1 Parker Hannifin orporation ivision atalog 0802-2/USA otes ontrol omponents 2 Parker Hannifin orporation ivision atalog 0802-2/USA Index ontrol omponents Advantages, Assembly, Ordering Information...

More information

CHECK VALVE P.147 SWING CHECK VALVE P.149 WAFER CHECK VALVE P.151 BALL CHECK VALVE P.153 TRUE UNION BALL CHECK VALVE P.155 BALL FOOT VALVE

CHECK VALVE P.147 SWING CHECK VALVE P.149 WAFER CHECK VALVE P.151 BALL CHECK VALVE P.153 TRUE UNION BALL CHECK VALVE P.155 BALL FOOT VALVE CHECK VAVE P.147 P.149 P.151 P.153 P.155 SWING CHECK VAVE WAFER CHECK VAVE BA CHECK VAVE TRUE UNION BA CHECK VAVE BA FOOT VAVE 145 PERFORMANCE OF SWING CHECK VAVE, BA CHECK VAVE, AND BA FOOT VAVE Min.

More information

Locker and cloakroom furniture

Locker and cloakroom furniture Locker and coakroom furniture F urnishing with stee furniture Take a ot of wear and tear! Assembed box ockers S 4000 The sturdy cassic ockers with many different compartment sizes... Durabe stee structure

More information

MOUNTING BRACKET SET. 2RT 2RT = Type-II Rectangle 3AS = Type-III Asymmetrical 5SQ = Type-V Square 4CBPB = Couter/Pro Beam L I G H T I N G

MOUNTING BRACKET SET. 2RT 2RT = Type-II Rectangle 3AS = Type-III Asymmetrical 5SQ = Type-V Square 4CBPB = Couter/Pro Beam L I G H T I N G Product # Type Date Project Name Tunne LED Project Location Prepared By Housing Encosure Extruded, ow copper, corrosion resistant auminum aoy 6063-T5 and cear anodized, Cass 1, Type II per specification

More information

Tubing & Fittings G97. Catalog 9EM-TK-190-5

Tubing & Fittings G97. Catalog 9EM-TK-190-5 atalog 9E-TK-90-5 Tubing & Fittings Polyethylene Tubing... 98-99 ylon Tubing... 00-0 Polyurethane Tubing... 02 Push-to-onnect, Prestolok etal Fittings... 04-5 Fittings... 6-2 etric Adapters... 22-23 97

More information

Online Buyers Guide Listing Order Form

Online Buyers Guide Listing Order Form Onine Buyers Guide The Fuid Power Handbook & Directory - Manufacturers is the pace to find the right fuid power component or system soution, right where you need it. Whatever you re searching for any type

More information

Maximum Working Pressure. Code Description Brass

Maximum Working Pressure. Code Description Brass Technical Information Series 500 General escription Series 500 low pressure ball valves provide total shut-off capability for services up to 41 ar (600 PSI). Series 500 consists of PT female/female ports,

More information

PROTECTRON MACHINED CONTACT CONNECTORS

PROTECTRON MACHINED CONTACT CONNECTORS PROTECTRON MACHINED CONTACT CONNECTORS PROTECTRON INTRODUCTION INNER CLIP The inner cip consists of 4 Leaf Springs, stamped and rounded to take strip/round mae contacts at the bottom edge, faciitating

More information

GStype/HGStype/WGStype

GStype/HGStype/WGStype Tooing News No.E473 Achieving Stabe And Long Too Life With Exceent Chip Evacuation Super MutiDri GStype/HGStype/WGStype 2009-015 series series New J fute Design Achieves Exceent Chip Contro And Stabe Driing

More information

GEAR MOTORS. Displacement from 2 to 15 ccm Pressure up to 280 bar Speed from 500 to 4000 RPM

GEAR MOTORS. Displacement from 2 to 15 ccm Pressure up to 280 bar Speed from 500 to 4000 RPM Dispacement from 2 to 15 ccm Pressure up to 280 bar Speed from 500 to 4000 PM GEA MOTOS JM Gear Motor Cataogue JM TABE OF CONTENTS DESCIPTION......................................................................................................................

More information

GEAR PUMPS. Displacement from 10 to 36 ccm Pressure up to 300 bar GHD0. Speed from 350 to 3400 RPM

GEAR PUMPS. Displacement from 10 to 36 ccm Pressure up to 300 bar GHD0. Speed from 350 to 3400 RPM GEA PUMPS Dispacement from 10 to 36 ccm Pressure up to 300 bar GHD0 Speed from 350 to 3400 PM Gear Pump Cataogue GHD0 TABE OF CONTENTS DESCIPTION......................................................................................................................

More information

S I G N E X T R U S I O N S & S Y S T E M S. Kit Includes: LED s. Power Supply. Clear Plastic (Not Included) 1/2 Opening. Cap Screw Part #5940

S I G N E X T R U S I O N S & S Y S T E M S. Kit Includes: LED s. Power Supply. Clear Plastic (Not Included) 1/2 Opening. Cap Screw Part #5940 3032 Waker Ridge Dr. NW Grand Rapids, MI To Free: (877) 784-0405 Fax: (1) 784-0411 Wa Mount Tension Frame (Mi Finish) Cover Screw Part #5215 1 4-1/8 1-1/ Fexibe Face (Not Incuded) Mounting Hardware (Not

More information

Displacement from 43 to 150 ccm Pressure up to 280 bar Speed from 250 to 3200 RPM GEAR PUMPS QHD2

Displacement from 43 to 150 ccm Pressure up to 280 bar Speed from 250 to 3200 RPM GEAR PUMPS QHD2 Dispacement from 43 to 150 ccm Pressure up to 280 bar Speed from 250 to 3200 PM GEA PUMPS QHD2 Gear Pump Cataogue QHD2 TABE OF CONTENTS BASIC DESCIPTION.............................................................................................................

More information

Easy to assemble Available with long or short nut in wide range of styles and sizes 651 MALE ELBOW 5/16 O.D. TUBE 1/8 PIPE MALE CONNECTOR

Easy to assemble Available with long or short nut in wide range of styles and sizes 651 MALE ELBOW 5/16 O.D. TUBE 1/8 PIPE MALE CONNECTOR A29-1 TM CIC 200 BRASS COMPRESSION TUBE FITTINGS ASSORTMENT P/N 7745 Medium pressure air, oil, water and natural gas applications Manufactured from high density brass alloy No flaring or soldering required

More information

Actros - Specifications

Actros - Specifications Pease note: Changes may have been made to the product since the brochure went to press (01.02.2014). The manufacturer reserves the right to make changes to the design, form, coour and specification of

More information

RNFTL A5 S RS2510A20. Rolled ball screws B256

RNFTL A5 S RS2510A20. Rolled ball screws B256 oe ba screws -I-6.5 oe a Screw Series (1) Prouct cassification NSK roe ba screws are cassifie by nut moe as shown in abe I-6.4. abe I-6 4 Cassification of roe ba screws moe shape ecircuation system cassification

More information

CHECK valve SPECIFICATION. glt valves CHECK VALVE APPLICATION MANUFACTURING STANDARDS

CHECK valve SPECIFICATION. glt valves CHECK VALVE APPLICATION MANUFACTURING STANDARDS CECK VAVE APPICATION SPECIFICATION Sometimes referre to as non-return valve, check valves prevents back-flow, constantly keeping flow in one irection. Check valve are esigne to close quickly an automatically

More information

Thread Direction R = Right hand L = Left hand (Not Available for Micro Series) (Refer to leadscrew. Code. availability)

Thread Direction R = Right hand L = Left hand (Not Available for Micro Series) (Refer to leadscrew. Code. availability) Kerk onventiona s: FW Series Free Wheeing Kerk FW Series conventiona stye, without anti-backash function. The Kerk FW Series genera purpose free-wheeing nut is for appications not requiring anti-backash

More information

ABB Measurement & Analytics. Valve positioners For marine applications

ABB Measurement & Analytics. Valve positioners For marine applications ABB Measurement & Anaytics Vave positioners For marine appications 2 VALVe positioners For marine appications Vave positioners For the marine industry ABB s industry proven EDP300 and TZIDC positioners

More information

Standard Quick-Disconnect Couplings Series ES one-way shut-off DN 7.2

Standard Quick-Disconnect Couplings Series ES one-way shut-off DN 7.2 Stanar Quick-Disconnect Coupings Series ES one-way shut-off Materias a PN 35 bar -20 C +100 C air a.o. 7,2 ISO 228/DIN 2999/DIN 13 1100 L/min yes 1-way Eur. Stanar wor-wie 10 Coupings with mae threa Threa

More information

HANDBOOK PIPING ACCESSORIES. Ed PIPING ACCESSORIES AT-ED 01/ ENG 1

HANDBOOK PIPING ACCESSORIES. Ed PIPING ACCESSORIES AT-ED 01/ ENG 1 HANDBOOK Ed. 2017 AT-ED 01/2017 - ENG 1 CHAPTER 3 ACCESS FITTINGS AND VALVE CORES FOR REFRIGERATION PLANTS THAT USE HCFC, HFC, HC, HFO, OR R744 REFRIGERANTS APPLICATIONS The access fittings illustrated

More information

TANK - S ELECTRICAL SYSTEM

TANK - S ELECTRICAL SYSTEM TANK - S ELECTRICAL SYSTEM Mode Year 2009 TANK - S ELECTRICAL SYSTEM TABLE OF CONTENTS: PAGE 3 ) PIMARY WIRE COLOR DESIGNATION: Red. Green. Orange. Yeow. Bue. PRIMARY COMPONENTS: Battery. Fuses. Seat Switch.

More information

GEAR PUMPS. Displacement from 7 to 51 ccm Pressure up to 260 bar QHD0. Speed from 350 to 3400 RPM

GEAR PUMPS. Displacement from 7 to 51 ccm Pressure up to 260 bar QHD0. Speed from 350 to 3400 RPM GEA PUMPS Dispacement from 7 to 51 ccm Pressure up to 260 bar QHD0 Speed from 350 to 3400 PM Gear Pump Cataogue QHD0 TABE OF CONTENTS DESCIPTION......................................................................................................................

More information

EH Range Technical Data

EH Range Technical Data EH Range Technica Data Eectro-hydrauic Vave Actuators Redefining Fow Contro EH Range Technica Data INTRODUCTION The Rotork EH Range of sef-contained, eectro-hydrauic actuator incudes an integrated contro

More information

Overview. The MicorTIG series at a glance

Overview. The MicorTIG series at a glance www.orch.com.au Overview Lorch, word-eading, new, a in one resonance technoogy that enabes the next generation of portabe machines to operate from mains suppy, sma generators and batteries a deivering

More information

Precision Ground Plates and Flat Bars. Lifting and Clamping Devices. Ground Precision Components. Elastomer-Bars, -Sheets, -Sections

Precision Ground Plates and Flat Bars. Lifting and Clamping Devices. Ground Precision Components. Elastomer-Bars, -Sheets, -Sections A B C D E F G H J K L Die Sets Precision Ground Pates and Fat Bars Lifting and Camping Devices Shanks, ifter studs, eyebots Camping caws, screws and bots Guide eements Ground Precision Components Springs

More information

Fittings and accessories

Fittings and accessories Connectors L1 1 Poyamide pipe Union screw Taper ring Connector Insert seeve 10-1-10-05 state: 01.12EN Connector with cyindrica or conica screw-in thread ateria stee gavanized and chromated yeow. Order-no.

More information

The giant amongst the giants.

The giant amongst the giants. BB9090 PLUS 02 BB9090 PLUS The giant amongst the giants. The argest mode of the New Hoand big baer range is the BB9090 PLUS. Its superior performance both in terms of perfect, firm, we-shaped baes as we

More information

Fenix TK65R Flashlight

Fenix TK65R Flashlight BrightGuy.com is an authorized Fenix Distributor Fenix TK65R Fashight 1. Cataput action bet cip 2. Quick-reease button Technica Parameters ANSI/PLATO Genera Mode Fash Mode FL1 Turbo High Med Low Eco Strobe

More information

INSTRUMENTATION BALL VALVES VB3 Series

INSTRUMENTATION BALL VALVES VB3 Series INSTRUMENTATION BALL VALVES VB3 Series www.korokusa.com Kor-Lok USA eatures Directiona ande Pressure rating wit standard PTE seats 3000psig (206bar) ony for te vaves wit orifice 4.8 2500psig (172bar) for

More information

$1.50 $3.00 U.S. &adaptors chart

$1.50 $3.00 U.S. &adaptors chart $.50 $.00 U.S. &adaptors chart Our trained Quality Assurance Personnel follow a rigid inspection program to ensure that our fittings meet or surpass the strictest requirements of SAE. Quality Assurance

More information

L-SERIES BACKHOES 310L EP / 310L / 310SL / 310SL HL / 315SL / 410L / 710L LIFT MORE AND MULTITASK

L-SERIES BACKHOES 310L EP / 310L / 310SL / 310SL HL / 315SL / 410L / 710L LIFT MORE AND MULTITASK L-SERIES BACKHOES L EP / L / SL / SL HL / 5SL / L / 7L LIFT MORE AND MULTITASK THE 7L -ft. 9-in. MAXIMUM DIGGING DEPTH (WITH OPTIONAL EXTENDABLE DIPPERSTICK) UP TO % INCREASE IN BACKHOE LIFT CAPACITY (WITH

More information

INSTALLATION INSTRUCTION ALL FLANGED RUBBER EXPANSION JOINTS

INSTALLATION INSTRUCTION ALL FLANGED RUBBER EXPANSION JOINTS INSTALLATION INSTRUCTION ALL FLANGED RUBBER EXPANSION JOINTS Rubber expansion joints are avaiabe in two ready to fit versions with standard connections according to DIN, ASA, BS, etc. Rotatabe stee fanges

More information

STAINLESS STEEL AISI 316L M PROFILE

STAINLESS STEEL AISI 316L M PROFILE VS STANESS STEE AS 316 M PROFE COUPNG SP COUPNG REDUCER WT PAN END STANESS STEE AS 316 S10AB-BP S10AC-BP 15 52 10 39 100 S10AD-BP 18 52 10 44 100 S10AE-BP 22 59 13 62 100 S10AF-BP 28 61 13 78 100 S10AG-BP

More information

BNZ Small hole boring bars DAL / DDL / DML. G High speed machining for super finishing hardened steel (HRC50~60) G Excellent surface roughness

BNZ Small hole boring bars DAL / DDL / DML. G High speed machining for super finishing hardened steel (HRC50~60) G Excellent surface roughness SUMIBOON / SUMIDIA Precision BNBB M20 Sma hoe boring toos CBN cutting edge is brazed on to a soid carbide shank. Sma hoe boring BNZ M21 Sma hoe boring bars Soid carbide boring bars WB M22 CBN rooving System

More information

WINNIPEG

WINNIPEG CALGARY 1-866-629-7847 EDMONTON 1-800-661-7770 SASKATOON 1-800-667-5886 WINNIPEG 1-844-278-5771 1 ammonia hose N2000 century 2000 anhydrous ammonia hose Hig -grade ow per ea on P tu e reinfor ed wit u

More information

Value Proposition. Applications/Markets. r Applications with long cycle life

Value Proposition. Applications/Markets. r Applications with long cycle life Fluoropolymer Tubing - PVF Tubing Value Proposition Fluoride) is uoropolymer ion of or use in ons requiring ith low xhibits low le providing gth, excellent nd good emicals and c s PVF use in ultrand ground

More information

FLUORESCENT BI-PIN/MEDIUM BASE HID

FLUORESCENT BI-PIN/MEDIUM BASE HID KILLARK Z A H LO C FLUORESCENT BI-PIN/MEDIUM BASE HID Cass I, Div. 2, Groups A,B,C,D* Cass, Zone 2, Groups C,B,A Cass II, Div. 1 & 2, Groups E,F,G* Cass III Suitabe for wet ocations Marine Rated (US Ony)

More information

Piston pumps for eff icient wellpoint dewatering

Piston pumps for eff icient wellpoint dewatering Piston pumps for eff icient wepoint dewatering PT series P u m p s f o r r e s u t s Innovative eaders for the past 60 years BBA Pumps BV woudn t be a Dutch company if it didn t know how to dea with water!

More information

Delivering the right solution for you

Delivering the right solution for you Cupboards Deivering the right soution for you The market eader in persona storage soutions for over 30 years, Link ockers is the UK s argest manufacturers of ockers & cupboards. In addition to our diverse

More information

Body Length: 21.5cm. Overall Height: 8.5cm. Main Rotor Dia: 19cm. Name Quantity Name Quantity. Helicopter 1 Remote Control!

Body Length: 21.5cm. Overall Height: 8.5cm. Main Rotor Dia: 19cm. Name Quantity Name Quantity. Helicopter 1 Remote Control! CONGRATULATIONS ON OWNING THE. SPEED master mini RIC HELICCPTERI THE ULTIMATE INDOOR OUTDOOR MINI HELICOPTER IMPORTANT: For ages 14+ ony! This product is not a toy. To ensure safety, this manua must be

More information

EPSM / EPSW. PN Coated End Mills for Machining of Stainless Steels FEATURES. Innovative cutting edge design increases tool life

EPSM / EPSW. PN Coated End Mills for Machining of Stainless Steels FEATURES. Innovative cutting edge design increases tool life EPSM / EPSW PN Coated End Mis for Machining of Stainess Stees FEATURES Innovative cutting edge design increases too ife New PN coating exhibits exceent adhesion and wear resistance EPSM: For both roughing

More information

1B20 1B30 1B40. The engineering result of careful market research: Small, light, powerful and universally applicable kw HP.

1B20 1B30 1B40. The engineering result of careful market research: Small, light, powerful and universally applicable kw HP. The engineering resut of carefu market research: Sma, ight, powerfu and universay appicabe Te: 0 85 3 / 39-0 Fax: 3 94 8 http://www.hatz-diese.de emai: marketing@hatz-diese.de.4-7.7 kw.8-0.5 HP 5 / 629

More information

BALL valve FLOATING BALL VALVE

BALL valve FLOATING BALL VALVE BA valve FOATING BA VAVE BA VAVE APPICATION Because of their excellent operating characteristics, ball valves are used for the broadest spectrum of isolation applications and are available in a wide range

More information

HVAC/R. Australia New Zealand Edition

HVAC/R. Australia New Zealand Edition HVAC/R Australia New Zealand Edition 2011 2012 MANIFOLDS 481CKPC 400 Series Deluxe 2 Valve Brass Manifold 580CKPSC 680CKPSC 513CC Dual O ring Valve seals and Soft Seat Valves Precision engineered with

More information

Displacement from 10 to 100 ccm Pressure up to 300 bar Speed from 300 to 3200 RPM GEAR PUMPS QHD1

Displacement from 10 to 100 ccm Pressure up to 300 bar Speed from 300 to 3200 RPM GEAR PUMPS QHD1 Dispacement from 10 to 100 ccm Pressure up to 300 bar Speed from 300 to 3200 PM GEA PUMPS QHD1 Gear Pump Cataogue QHD1 TABE OF CONTENTS DESCIPTION......................................................................................................................

More information

Absorption Chemical process engineering Cooling Disinfection Desuperheating Dust control Fire protection Foam destruction Gas treatment

Absorption Chemical process engineering Cooling Disinfection Desuperheating Dust control Fire protection Foam destruction Gas treatment Absorption Chemica process engineering Cooing isinfection esuperheating ust contro Fire protection Foam destruction Gas treatment umidification of air umidification of goods umidification of texties Oi

More information

North American Miscellaneous Connectors

North American Miscellaneous Connectors Combustion North American Miscellaneous Connectors 8775 Quick Disconnects for Oil, Compressed Air, and Natural Gas Bulletin 8770 FEATURES The 8775 couplings allow you to couple and uncouple your hoses

More information