Electronic Service Manuals

Transcription

1 Electronic Service Manuals This electronic document is provided as a service to our customers. We do not create the contents of the information contained in this document. Should you have detailed questions pertaining to the information contained in this document, you may contact Michco, or the manufacturer which provided the original information in this electronic deliverable. Michco s only part in this electronic deliverable was the electronic assembly process. By providing this manual on line we are not guaranteeing parts availability. ou may contact Michco through the following methods: Phone (57) or (800) -9 0 N. High St. -- Lansing, Michigan Fax: (57) CustServe@Michco.com Web site: Parts Web site: Order Parts on Line at: Directly to Parts & Service: By Shop@Michco.com By Fax: (57) By Voice: Use numbers above. Serving the Cleaning Industry Since 9 Notice: All copyrighted material remains property of original owners, all trademarks are property of respective owners. Manuals are subject to Manufacturer s reproduction limitations. Originals or reproductions were provided by manufacturers through a request. We make no warranty as to the correctness of information provided in this document and you assume all risk. By placing these manuals on line we are not declaring our corporation to be an manufacturer authorized dealer or provider, please check our web site for authorized manufacturers we represent.

2 55SS Parts Manual MM49 Rev.09

3 This manual is furnished with each new TENNANT Model 55SS. This manual consists of the How To Use This Manual; Standard Parts; Options; Breakdowns; and Cross Reference sections. MACHINE DATA Please fill out at time of installation for future reference. Machine Model Number --55SS Machine Serial Number -- Machine Options -- TENNANT Representative/phone no. -- Customer ID Number -- Date of Installation -- Manual Number --MM49 Revision: 09 Published: Copyright E 996, 997, 998, 999, 000 TENNANT, Printed in U.S.A.

4 This section on HOW TO USE THIS MANUAL will tell you how to: -- Find important machine information for ordering correct repair parts. -- Find TENNANT part numbers. -- Order TENNANT parts and supplies. HOW TO USE THIS MANUAL HOW TO USE THIS MANUAL IMPORTANT INFORMATION When placing an order for parts, the machine model and machine serial number are important. Refer to the MACHINE DATA box which is filled out during the installation of your machine. The MACHINE DATA box is located on the inside of the front cover of this manual. The model number of your machine is on the side of the machine. The serial number of your machine is printed on the machine data plate located as shown SS MM49 (4-97) -

5 HOW TO USE THIS MANUAL FINDING A TENNANT PART NUMBER This manual contains the following sections: -- HOW TO USE THIS MANUAL -- STANDARD PARTS -- OPTIONS -- BREAKDOWNS -- CROSS REFERENCE The STANDARD PARTS section lists repair parts for standard machines. They are grouped in this general order: -- General wear parts. -- Machine frame and related parts. -- Machine propelling system. -- Scrubbing components. -- Electrical parts. The OPTION section lists repair parts of options. The BREAKDOWN section lists available repair parts of major components. All sections in this manual consist of parts illustrations and corresponding parts lists. The parts illustrations are numbered with Ref numbers which refer to corresponding parts lists. The parts lists include a number of columns of information: -- Ref -- column refers to the reference number on the parts illustration. -- indicates the part is an assembly. -- indicates the part is included in the assembly listed just before it. -- TENNANT Part No. -- column lists the TENNANT part number for the part. -- Serial Number -- column indicates the set of machines the part number is applicable to. Serial numbers change when the machine design has been modified. The most current design of the machine is shown in the main illustration, older designs are boxed in a corner of the illustration. -- Description -- column is a brief description of the part. -- Qty. -- column lists the quantity of that part used in that area of the machine. - 55SS MM49 (-96)

6 HOW TO USE THIS MANUAL NOTE: If a service kit is installed on your machine, be sure to keep the INSTRUCTION BULLETIN which came with the kit. It contains repair parts numbers needed for ordering future parts. NOTE: Fasteners used in this machine may be metric or non-metric. Take care when replacing hardware to replace with same thread size. PLACING AN ORDER Orders may be placed by phone, fax, or by mail. Phone orders may need written confirmation. Follow the steps below to insure prompt delivery:. Identify the model number of your machine.. Identify the serial number of your machine.. Find the part number of the part you need. Do not order by page number or reference number. If you are not able to find the part number, call your TENNANT representative for help or send the old part as a sample. 4. Determine the quantity of the part you need. 5. Provide the following company information: -- Company name -- Customer ID Number -- Shipping address -- Billing address -- First and last name of person ordering parts -- Telephone number -- Purchase order number 6. Provide definitive shipping instructions. 55SS MM49 (-96) -

7 HOW TO USE THIS MANUAL Any claim for loss or damage to a shipment in transit should be filed promptly with the transportation company making the delivery. Shipments will be complete unless the packing list or order acknowledgement indicates items back ordered. If parts received are suspected to be incorrect or defective, please contact the TENNANT representative from whom you ordered the part. They will give authorization for return and/or handle replacement shipments when required SS MM49 (-96)

8 STANDARD PARTS SECTION CONTENTS PAGE Fig. -- Recommended General Maintenance Items Fig. -- Replacement Brushes for MaxProt 000 Two-Brush System Fig. -- Replacement Brushes for MaxProt 00 Three-Brush System Fig Main Frame Fig Seat Assembly Fig Steering Group Fig Drive Wheel Group Fig Front Brake Linkage Group Fig Rear Brake Linkage Group Fig Rear Wheel and Brake Group Fig. -- Floor Plate Group Fig. -- Directional Pedal Group Fig. -- Sweeper Frame Group Fig Sweeper Drive Group Fig Brush Idler Group Fig Side Brush Group Fig Hopper Lift Group Fig Hopper Lift Arms Group Fig Vacuum System Group Fig Sweeper Control Box Fig. -- Scrub Head Drive Group for MaxProt 000 Two-Brush System Fig. -- Scrub Head Mount Group for MaxProt 000 Two-Brush System Fig. -- Scrub Head Stop and Squeegee Mount Group for MaxProt 000 Two-Brush System Fig Scrub Head Lift Group for MaxProt 000 Two-Brush System Fig Edge Scrub Group for MaxProt 000 Two-Brush System Fig Solution Valve Group for MaxProt 000 Two-Brush System Fig Right Side Squeegee Group for MaxProt 000 Two-Brush System Fig Left Side Squeegee Group for MaxProt 000 Two-Brush System Fig Scrubhead Drive Group for MaxProt 00 Three-Brush System Fig Scrub Head Lift Group for MaxProt 00 Three-Brush System Fig. -- Edge Scrub Group for MaxProt 00 Three-Brush System Fig. -- Scrub Head Stops and Squeegee Mount Group for MaxProt 00 Three-Brush System Fig. -- Scrub Head Mount Group for MaxProt 00 Three-Brush System Fig Solution Group for MaxProt 00 Three-Brush System Fig Right Side Squeegee Group for MaxProt 00 Three-Brush System Fig Left Side Squeegee Group for MaxProt 00 Three-Brush System Fig Rear Squeegee Mount Group Fig Rear Squeegee Group Fig Rear Squeegee Linkage Group Fig Recovery Tank Group Fig Solution Tank Group Fig Demister and Cover Group Fig Instrument Panel Group Fig Electronic Panel Group Fig Control Box Group Fig Vacuum Fan Group Fig Electrical Schematic (for machines below serial number 00487) Fig Electrical Schematic (for machines serial number and above) Fig Wire Harness Group Fig Label Group SS MM49 (9-98) -

9 STANDARD PARTS - 55SS MM49 (-98)

10 STANDARD PARTS Fig. - Recommended General Maintenance Items 078 Ref. Tennant Part No. Machine Serial Number Description Qty. 404 ( ) Squeegee Kit Rear 4575 ( ) Squeegee Front 868 ( ) Gasket, Squeegee 54 ( ) Bracket, Retainer ( ) Squeegee, Side 467 ( ) Skirt, Brush, Rh Front 4674 ( ) Strip, Retainer, Skirt, Rh 467 ( ) Skirt, Brush, Lh Front 467 ( ) Strip, Retainer, Skirt, Lh 595 ( ) Skirt, Brushrear 595 ( ) Strip, Retainer, Skirt--Rear 6 ( ) Blade Assy, Squeegee, Side 665 ( ) Blade, Side Squeegee, Front 666 ( ) Retainer, Mtg, Front Blade 66 ( ) Skirt, Scrub Head Front 797 ( ) Rivet, Plastic.5Dx ( ) Washer--Flt.5 Fender Pltd 667 ( ) Belt, V V X ( ) Belt, V V X ( ) Seal, Foam Rbr.0 X.0 X ( ) Skirt, Side, Left 688 ( ) Strip, 4.75 Dia Holes 604 ( ) Skirt, Side 604 ( ) Strip,.74 Dia Holes 604 ( ) Strip,.74 Dia Holes 648 ( ) Seal, Bulb, 5.50 Lg 6044 ( ) Skirt, Rear 6065 ( ) Skirt, Hopper Lip 6066 ( ) Bracket, Retainer, Hopper Lip 646 ( ) Seal, Foam Rbr.5X.0X ( ) Seal, Bulb, 9.75 Lg 69 ( ) Seal, Vac -- Fan 646 ( ) Filter Pkg, Panel 9 Pleats 55SS MM49 (0-96) -

11 STANDARD PARTS Fig. - Replacement Brushes for MaxProt 000 Two-Brush System SS MM49 (-98)

12 STANDARD PARTS Fig. - Replacement Brushes for MaxProt 000 Two-Brush System Ref. Tennant Part No. Machine Serial Number Description Qty. 640 ( ) Brush Assy, 6 Inch Poly 8749 ( ) Brush--Side Swp --9 D-- Poly 4967 ( ) Brush--Disk Scr 0 D Assy Nylon ( ) Bracket Spring Retainer ( ) Spring, Brush Retaining ( ) Adaptor, Brush 495 ( ) Brush--Disk Scr 0 D Assy Poly ( ) Bracket Spring Retainer ( ) Spring, Brush Retaining ( ) Adaptor, Brush 4586 ( ) Brush--Disk Scr 0 D--Assy--S Ab ( ) Bracket Spring Retainer ( ) Spring, Brush Retaining ( ) Adaptor, Brush ( xxxxxx ) Pad Driver Brush 0D Assy Poly ( xxxxxx ) Bracket Spring Retainer ( xxxxxx ) Spring, Brush Retaining ( xxxxxx ) Adaptor, Brush 8 ( xxxxxx ) Spacer Pad Holder 506 ( xxxxxx ) Pad Holder, Threaded 505 ( xxxxxx ) Washer Brush Pad Retainer 4 4 ( xxxxxx ) Clip Retaining ( xxxxxx ) Clip Locking 6 66 ( xxxxxx ) Spring Compression ( xxxxxx ) Ring,Retain,Ex,0.50 Stl Steel ( ) Pad--Polish 0D--White 8 76 ( ) Pad--Buff--0D Red 8 76 ( ) Pad--Scru.0D Blue 8 76 ( ) Pad--Strip--0D Brown ( xxxxxx-- ) Pad, Driver ( xxxxxx-- ) Back, Pad Drive, W/Face 0 Dia. 559 ( xxxxxx-- ) Adapter, Brush 488 ( xxxxxx-- ) Spring, Brush Retaining 499 ( xxxxxx-- ) Bracket Spring Retainer ( xxxxxx-- ) Center Device Assembly ( xxxxxx-- ) Scr Pan Ss M4x0.7 55SS MM49 (-98) -5

13 STANDARD PARTS Fig. - Replacement Brushes for MaxProt 00 Three-Brush System SS MM49 (-98)

14 STANDARD PARTS Fig. - Replacement Brushes for MaxProt 00 Three-Brush System Ref. Tennant Part No. Machine Serial Number Description Qty. 640 ( ) Brush Assy, 6 Inch Poly 8749 ( ) Brush--Side Swp --9 D-- --Poly 0574 ( ) Brush--Disk Scr 6 D--Assy--Nyl ( ) Spring, Brush Retaining ( ) Bracket Spring Retainer 04 ( ) Brush--Disk Scr 6 D Assy Poly ( ) Spring, Brush Retaining ( ) Bracket Spring Retainer 0576 ( ) Brush--Disk Scr 6 D--Assy--S Ab ( ) Spring, Brush Retaining ( ) Bracket Spring Retainer 6 06 ( xxxxxx ) Brush--Pad Drive--6 D--Assy--Poly ( xxxxxx ) Bracket Spring Retainer ( xxxxxx ) Spring, Brush Retaining ( xxxxxx ) Adaptor, Brush 0 8 ( xxxxxx ) Spacer Pad Holder 978 ( xxxxxx ) Pad Holder ( ) Pad--Strip--6D Brown ( ) Pad--Scrub--6D Blue ( ) Pad--Buff 6Dred ( ) Pad--Polis--6D White 7000 ( xxxxxx-- ) Pad, Driver ( xxxxxx-- ) Back, Pad Drive, W/Face 0 Dia ( xxxxxx-- ) Adapter, Brush ( xxxxxx-- ) Spring, Brush Retaining ( xxxxxx-- ) Bracket Spring Retainer ( xxxxxx-- ) Center Device Assembly ( xxxxxx-- ) Scr Pan Ss M4x0.7 55SS MM49 (-98) -7

15 STANDARD PARTS Fig. 4 - Main Frame SS MM49 (-96)

16 STANDARD PARTS Fig. 4 - Main Frame Ref. Tennant Part No. Machine Serial Number Description Qty. 64 ( ) Cover, 55E 5964 ( ) Hinge 69 ( ) Scr--Hex M 8X Pltd ( ) Washer Flt. Hard ( ) Lanyard Assy ( ) Scr Hex M6X ( ) Washer Flt.5 Hard ( ) Nut Hxlocnyln M 6X ( ) Angle Guide Cover ( ) Nut Hx Flange M 8X ( ) Angle, Mtg, Latch 405 ( ) Latch, Cover 675 ( ) Scr--Hex M 8X Pltd ( ) Skirt, Frame, Rh Side ( ) Skirt, Frame Lh Side ( ) Skirt Frame Rh Rear ( ) Skirt Frame Lh Rear ( ) Scr--Hxfmgm 4X0.7 0 Pltd ( ) Washer, Flat 08 Ss ( ) Tray, Battery 680 ( ) Frame Wldt 55SS MM49 (0-96) -9

17 STANDARD PARTS Fig. 5 - Seat Assembly SS MM49 (-96)

18 STANDARD PARTS Fig. 5 - Seat Assembly Ref. Tennant Part No. Machine Serial Number Description Qty. 456 ( ) Seat, W/ Support 60 ( ) Frame, Support, Seat 600 ( ) Panel, Shroud, Seat Support 9 ( ) Bumper, / Matl ( ) Screw Pan 8X ( ) Nut Hxlocnyln M 8X ( ) Washer Flt. Hard ( ) Seat Assy ( ) Scr--Hex.8--6X.00 Sems Pltd ( ) Latch ( ) Washer,.8B.6D.06Nylon 490 ( ) Washer Flt.5 Hard 0694 ( ) Scr Hex M6X ( ) Nut Hxlocnyln M 6X ( ) Sprng,Tens,0.56Odx.05Wire 0.9L ( ) Plate, Strike 6 69 ( ) Scr--Hex M 8X Pltd ( ) Pouch Operator Handbook ( ) Screw Pan 8X ( ) Washer Flt. Hard ( ) Nut Hxlocnyln M 8X.5 55SS MM49 (0-96) -

19 STANDARD PARTS Fig. 6 - Steering Group SS MM49 (4-96)

20 STANDARD PARTS Fig. 6 - Steering Group Ref. Tennant Part No. Machine Serial Number Description Qty. 685 ( ) Sprocket, Steering 496 ( ) Pin, Roll ( ) Clip, Sprocket ( ) Washer, Finishing ( ) Steering Chain Kit 6 07 ( ) Link, Chain ( ) Plate Wldt, Idler Mounting 8 45 ( ) Chain Idler Kit ( ) Bearing, Flange 0 45 ( ) Housing, Bearing 45 ( ) Rod, Lower Steering ( ) Key, Woodruff 4690 ( ) Bearing, Ball ( ) Ring, Retaining ( ) Sprocket ( ) Joint, Universal ( ) Screw, Set 8 60 ( ) Pin, Roll ( ) Bearing, Flange ( ) Plate, Cable Mounting 0484 ( ) Bearing, Flange 585 ( ) Rod, Control 656 ( ) Knob 4 46 ( ) Column, Steering 5 4 ( ) Shaft, Steering ( ) Wheel, Steering ( ) Cap, Steering Wheel 55SS MM49 (6-00) -

21 STANDARD PARTS Fig. 7 - Drive Wheel Group SS MM49 (4-97)

22 STANDARD PARTS Fig. 7 - Drive Wheel Group Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Gearbox, Hurth ( ) O--Ring 8784 ( ) Plug ( ) Grease Fitting ( ) Driving Gear ( ) Wheel Bolt ( ) Bearing & Housing ( ) Seal, O--Ring.987Id X.0T ( ) Motor, Traction.0Hp (See Breakdowns) ( ) Boot, 90Deg.50D.57X ( ) Scr Soc M 8X ( ) Scr Soc M 8X ( ) Tire & Wheel 6.5X A ( ) Tire,6.5X6X.5 Sf/Xg,Solid ( ) Nut--Wheel M4 X ( ) Bumper,Rbr,W.Knurled Stud ( ) Nut--Hxlocnyln Thin Pltd 55SS MM49 (6-00) -5

23 STANDARD PARTS Fig. 8 - Front Brake Linkage Group SS MM49 (4-96)

24 STANDARD PARTS Fig. 8 - Front Brake Linkage Group Ref. Tennant Part No. Machine Serial Number Description Qty. 60 ( ) Shaft Wldt, Cross, Brake,Front 0694 ( ) Screw M 6 X ( ) Washer--Flt.5 Fender Pltd 4 65 ( ) Bearing, Brake ( ) Bar, Support, Brg ( ) Washer Flt. Ss ( ) Scr, Soc M 8X ( ) Pad ( ) Cable Brake ( ) Clevis, Brake Adjust 504 ( ) Nut Hx Std ( ) Pin,Clevis,0.7 Dia.X.00 Lg 749 ( ) Pulley Assy, Cable,.5 Dia ( ) Pin Clevis 0.50 Dia.X.4 Lg ( ) Lever, Brake ( ) Sleeve,.44B.50D.8 Cr.Anc 7 44 ( ) Scr--Hex M 8X ( ) Nut Hx Flange M 8X.5See ( ) Cable Service Brake 0 87 ( ) Spring, Ext..85X.085X.75 55SS MM49 (0-96) -7

25 STANDARD PARTS Fig. 9 - Rear Brake Linkage Group SS MM49 (4-96)

26 STANDARD PARTS Fig. 9 - Rear Brake Linkage Group Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Pin,Clevis,0.7 Dia.X.00 Lg 678 ( ) Pulley Assy, Cable,.5 Dia ( ) Pin Clevis 0.50 Dia.X.4 Lg 4 47 ( ) Shaft Wldt, Cross, Brake Rear ( ) Screw M 6 X ( ) Washer--Flt.5 Fender Pltd 7 65 ( ) Bearing, Brake ( ) Scr--Hex M 8X ( ) Washer Flt. Ss ( ) Nut Hxlocnyln M 8X ( ) Rod--Thrd, Full ( ) oke,end,adjustable ( ) Nut Hx Std ( ) Pin Clevis.75 Dia X. Lg ( ) Spring, Ext..85X.085X ( ) Pin,Clevis,0. Dia.X.5 Lg 55SS MM49 (0-96) -9

27 STANDARD PARTS Fig. 0 - Rear Wheel and Brake Group SS MM49 (0-96)

28 STANDARD PARTS Fig. 0 - Rear Wheel and Brake Group Ref. Tennant Part No. Machine Serial Number Description Qty. 68 ( ) Wheel Assy, Rear 597A ( ) Tire,6X.5X. Sf,Sol.Smth ( ) Bearing--Ball,.8B.44D 0.6W ( ) Washer Flt.50 Sae ( ) Nut Hxlocnyln MX ( ) Brake Assy ( ) Backing Plate ( ) Bushing ( ) Cam,Nickel Plated ( ) Washer 6074 ( ) Retainer Ring 6075 ( ) Shoe Assembly 6076 ( ) Return Spring 4 68 ( ) Lever, Brake ( ) Plate Assy, Mtg,Brake Arm Brg ( ) Retaining Ring--External,.5D ( ) Nut--Hxslot Pltd ( ) Washer,.765B.50D.06Ss ( ) Cap, Hub ( ) Screw Hex MX ( ) Screw--Hex MX SS MM49 (4-97) -

29 STANDARD PARTS Fig. - Floor Plate Group SS MM49 (-99)

30 STANDARD PARTS Fig. - Floor Plate Group Ref. Tennant Part No. Machine Serial Number Description Qty. 48 ( ) Panel, Floor Rh 64 ( ) Angle, Mtg, Floor Plate 695 ( ) Panel, Floor, Lh, w/tread ( ) Tread, Floor ( ) Tread, Floor ( ) Plate--Cover ( ) Tread,Pedal, Anti--Slip 8 9 ( ) Bumper, / Matl ( ) Panel Assy, w/label 55SS MM49 (-99) -

31 STANDARD PARTS Fig. - Directional Pedal Group SS MM49 (-99)

32 STANDARD PARTS Fig. - Directional Pedal Group Ref. Tennant Part No. Machine Serial Number Description Qty. 696 ( ) Pedal w/tread 889 ( ) Pad, Tread 06474A ( ) Pin, Clevis ( ) Spacer ( ) Screw, Hex 6 6 ( ) Balljoint ( ) Rod, Threaded ( ) Arm ( ) Screw, Set 0 46 ( ) Washer, Nylon 4409 ( ) Bracket, Mounting, L.H. 468 ( ) Accelerator 8778 ( ) Bracket, Mounting, R.H ( ) Plate, Spring ( ) Screw, Socket 55SS MM49 (9-97) -5

33 STANDARD PARTS Fig. - Sweeper Frame Group SS MM49 (4-97)

34 STANDARD PARTS Fig. - Sweeper Frame Group Ref. Tennant Part No. Machine Serial Number Description Qty. 600 ( ) Frame Wldt, Presweep 0649 ( ) Scr--Hex Ssm0X.5 70 Full Thd ( ) Nut Hx Std Ss M0X ( ) Cover, Left Side ( ) Cover, Side, Rh ( ) Scr--HexSs M8X ( ) Scr--HexSs M8X.5 50 Full Thd ( ) Nut Hx SS M8X ( ) Washer Flt. Ss ( ) Skirt, Side, Left 688 ( ) Strip, 4.75 Dia Holes 0876 ( ) Screw Hex Ssm 6 X ( ) Washer Flt.5 Ss ( ) Hanger, Mtg, Sweeper Lh ( ) Guard, Side Brush ( ) Screw--Flat M 8X ( ) Roller, Bumper 8 96 ( ) Pin, Roller 9 49 ( ) Washer Flt.50 Hard ( ) Bracket Wldt, Hanger, Left ( ) Bracket Wldt, Hanger, Right 559 ( ) Bearing, Journal 604 ( ) Skirt, Side ( ) Strip,.74 Dia Holes ( ) Strip,.74 Dia Holes ( ) Seal, Left Side ( ) Seal, Bulb, 5.50 Lg ( ) Skirt, Rear ( ) Channel, Mounting, Rear Skirt 55SS MM49 (4-97) -7

35 STANDARD PARTS Fig. 4 - Sweeper Drive Group SS MM49 (9-98)

36 STANDARD PARTS Fig. 4 - Sweeper Drive Group Ref. Tennant Part No. Machine Serial Number Description Qty. 049 ( ) Motor,.8 Hp. 6V 9 ( ) Scr--Hexssm 6X.0 6 Nylonloc ( ) Sheave, V 4.00 Od.75Id ( ) Key Square Lg ( ) Kit, Sheave, Sweep Drive ( ) Sheave, Groove ( ) Pulley,Idler,W.Brng,Plastic ( ) Scr Flt.8--6X ( ) Washer Flt.8 Ss ( ) Nut Hxlocnyln ( ) Bracket, Idler 0047 ( ) Retainer 7899 ( ) Screw--Hexssm 6X ( ) Belt, V V X ( ) Spring, Ext,.75X.085X ( ) Tube Wldt, Brush Torque 7 70 ( ) Shield, Plug ( ) Bearing & Shaft Assy, Brush Drive ( ) Key Square Lg ( ) Sheave, V.46 Od 86 ( ) Ring,Retain,Ex,0.6Od,Basic 69 ( ) Plug, Brush Drive -- Nylon 408 ( ) Plate, Hold Down ( ) Washer,.656B.5D ( ) Spacer, Flanged ( ) Screw Panhead 6X ( ) Ring,Retain,In,.8Id,Basic ( ) Seal, Foam Rbr.0X.0X ( ) Washer--Belleville.5 Pltd ( ) Washer Flt.5 Ss 800 ( ) Bearing--Ball,0.6B.8D 0.4W 6958 ( ) Pin, Clevis 0. D X ( xxxxxx-- ) Shaft, Idler Pulley 55SS MM49 (-99) -9

37 STANDARD PARTS Fig. 5 - Brush Idler Group SS MM49 (4-97)

38 STANDARD PARTS Fig. 5 - Brush Idler Group Ref. Tennant Part No. Machine Serial Number Description Qty. 606 ( ) Cable 749 ( ) Pulley Assy, Cable,.5 Dia ( ) Angle, Cable Keeper ( ) Sleeve,.8B.49D.50L Ss ( ) Scr Hexssm 8X ( ) Washer Flt. Ss ( ) Nut--Hxlocnyln M 8X.5 Reg Ss ( ) Bracket, Mtg, Cable ( ) Scr Hexssm 8X ( ) Nut--Hxlocnyln.5--0 Regss ( ) Washer Flt.5 Ss 6087 ( ) Spacer, Flanged 6445 ( ) Washer,.656B.5D ( ) Arm, Brush Removal ( ) Shield, Plug ( ) Brg & Shaft Assy, Brush Idler ( ) Key Square Lg 8 69 ( ) Plug, Brush Drive -- Nylon 9 9 ( ) Scr--Hexssm 6X.0 6 Nylonloc 0 9 ( ) Washer Flat 6.4X.5X.6Ss M6 408 ( ) Plate, Hold Down 650 ( ) Screw Panhead 6 X ( ) Seal, Brush Lh 4 7 ( ) Scr Hexssmio ( ) Clip--Push On.5 Dia. 55SS MM49 (9-97) -

39 STANDARD PARTS Fig. 6 - Side Brush Group SS MM49 (-98)

40 STANDARD PARTS Fig. 6 - Side Brush Group Ref. Tennant Part No. Machine Serial Number Description Qty. 60 ( ) Bracket, Mtg, Side Brush 0900 ( ) Scr Hexssm 8X ( ) Washer Flt. Ss ( ) Scr--Hexssm 6X ( ) Bearing&Clr,0.6B.57D. W ( ) Flange,Brg, Hole, ( ) Screw Hex Ssm 6 X ( ) Washer Flt.5 Ss ( ) Nut Hxlocnyln M 6X.0 Reg Ss ( ) Shaft, Side Brush ( ) Key--Wdruff Asa# ( ) Sheave, V 4.00 Od 6956 ( ) Bracket Pulley ( ) Sheave, Idler V ( ) Belt, V V X ( ) Sheave, Idler.46 Od ( ) Bearing--Ball,0.6B.8D 0.4W 8 05 ( ) Ring,Retain,In,.8Id,Basic ( ) Bracket Wldt, Idler 0 ( ) Scr--Hexssm 8X.5 5 Nylnloc 657 ( ) Plate, Mounting ( ) Pin, Clevis, 0.5 Dia X.50 Lg 6094 ( ) Sleeve, Spacer ( ) Sleeve, Spacer ( ) Screw Set M 8X.5 55SS MM49 (-98) -

41 STANDARD PARTS Fig. 7 - Side Brush Lift Group SS MM49 (-99)

42 STANDARD PARTS Fig. 7 - Side Brush Lift Group Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Replm Kit, Actuator, Sweeplift 7080 ( ) Kit, Bracket, Mtg Actuator 9558 ( ) Pin,Clevis,0.7 Dia.X.50 Lg ( ) Pin, Hair Cotter.75D.07Wir ( ) Scr Hexssm 8X ( ) Washer Flt. Ss 7 68 ( ) Pin,Clevis,0.50 Dia.X.00 Lg ( ) Washer Flt.50 Sae ( ) Scr--Flt M8X ( ) Bracket, Mtg. Actuator 09 ( ) Scr, Hex M0 X ( ) Washer, Flt.8 Ss 55SS MM49 (-99) -5

43 STANDARD PARTS Fig. 8 - Hopper Lift Arms Group SS MM49 (0-96)

44 STANDARD PARTS Fig. 8 - Hopper Lift Arms Group Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Hopper 68 ( ) Bracket, Mtg, Filter 684 ( ) Bracket, Reinf, Hopper ( ) Scr Hexssm 8X ( ) Washer Flt. Ss ( ) Nut--Hxlocnyln M 8X.5 Reg Ss ( ) Bracket, Mtg, Bumper, Front ( ) Bracket, Hopper ( ) Skirt, Hopper Lip ( ) Bracket, Retainer, Hopper Lip 605 ( ) Arm Wldt, Hopper Lift 5648 ( ) Bearing, Flange Bore ( ) Scr--Shld.500Dx.00L ( ) Washer, Flat.8 Sae ( ) Washer, Flat.50 Sae ( ) Nut--Hylocnyln ( ) Bumper Wldt, Front ( ) Screw--Hex.--8X ( ) Nut--Hxlocnyln.--8 Regss ( ) Washer Flt. Sae 4 68 ( ) Bracket Wldt, Mtg,Actuator,Lh 68 ( ) Bracket Wldt, Mtg,Actuator,Rh 655 ( ) Actuator, 6V,.0 Strk 600Lb ( ) Pin,Clevis,0.7 Dia.X 4.00 Lg ( ) Scr, Hex Ss M0X ( ) Nut--Hxlocnyln MX.50 Reg Ss 7 64 ( ) Angle, Hopper Support ( ) Scr, Flt ( ) Scr, Flt M8X ( ) Scr, Hex Ss M6X ( ) Washer, Flat.5 Ss 5 55SS MM49 (0-96) -7

45 STANDARD PARTS Fig. 9 - Vacuum System Group SS MM49 (6-00)

46 STANDARD PARTS Fig. 9 - Vacuum System Group Ref. Tennant Part No. Machine Serial Number Description Qty. 607 ( ) Cover, Hopper 6400 ( ) Cover, Hopper,Less Dust Contrl 69 ( ) Plate, Latch Keeper ( ) Scr Hexssm 6X ( ) Nut Hxlocnyln M 6X.0 Reg Ss ( ) Washer Flt.5 Ss ( ) Harness, Hopper, Presweep 6 69 ( ) Harness, Hopper, Presweep ( ) Grommet,Rbr,0.69Id,For.5Matl ( ) Clamp--Cable, 0.8Dia 0.8Wth ( ) Scr--Hx Fmgm 6X ( ) Filter Pkg, Panel, 9 Pleat 695 ( ) Latch, Draw, Flexible 6497 ( ) Plate Wldt, Shaker 646 ( ) Seal, Foam Rbr.5X.0X ( ) Motor, Shaker 6V ( ) Weight, Eccentric ( ) Strap, Motor, Shaker ( ) Bar--Flt.06T 4.00W 5.00L,Rbr 8 76 ( ) Fan, Vac (See Breakdowns) 9 64 ( ) Seal, Vac -- Fan 0 88 ( ) Tube, Steel.6X.50X.6L 0977 ( ) Scr Hexssm 6X ( ) Plate Wldt, Mtg, Fan 647 ( ) Seal, Bulb, 9.75 Lg 4 ( ) Scr--Hexssm 8X.5 5 Nylnloc ( ) Plate, Latch ( ) Thermostat, Manual Reset 55D 7 64 ( ) Plate, Brushwrap (Filter System Removal) ( ) Terminal, Qkdisc..5M Tab.9 D ( ) Scr--Set, 0--4X0.5, Nylon Lock ( ) Sleeve,.5B.8D ( ) Scr, Soc 6X.0X5 55SS MM49 (6-00) -9

47 STANDARD PARTS Fig. 0 - Sweeper Control Box SS MM49 (-99)

48 STANDARD PARTS Fig. 0 - Sweeper Control Box Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Panel, Mtg, Elec 609 ( ) Plate, Cover, Elec 5764 ( ) Breaker--Circuit 0 Resetable ( ) Boot,Circuit Breaker 5 96 ( ) Breaker, Circuit 0 Amp 6 98 ( ) Breaker--Circuit, 0 Amp ( ) Insulator, Panel & Switchboard 8 6 ( ) Timer, Es, 5Sec, 6V ( ) Contactor Spst 0 ( ) Relay, Control 6V 06-- ( ) Grommet,Rbr,.50ID, for.9 Matl 658 ( ) Gasket, Electric Panel Cover ( ) Breaker--Circuit 7 Resetable 4 90 ( ) Diode, Elect Plug 55SS MM49 (6-00) -4

49 STANDARD PARTS Fig. - Scrub Head Drive Group for MaxProt 000 Two-Brush System SS MM49 (-99)

50 STANDARD PARTS Fig. - Scrub Head Drive Group for MaxProt 000 Two-Brush System Ref. Tennant Part No. Machine Serial Number Description Qty. 466 ( ) Frame, Scrubber Head 4674 ( ) Strip, Skirt Retainer, R.H. 467 ( ) Skirt, Front Brush, R.H ( ) Strip, Skirt Retainer, L.H ( ) Skirt, Front Brush, L.H ( ) Head Bushing Kit ( ) Pivot, Equalizer ( ) End, Rod ( ) Rod, Threaded ( ) Skirt, Rear Brush 595 ( ) Strip, Rear Skirt Retainer 40 ( ) Skirt Spring Retaining Kit ( ) Bracket, Rear Skirt ( xxxxxx ) Spacer, Gearbox ( xxxxxx ) Gearbox (Repl. by 75066) (See Breakdowns) 6 64 ( ) Motor, Electric (See Breakdowns) ( ) Nut, Hex ( ) Hub, Brush Drive ( ) Key, Square ( xxxxxx ) Screw, Hex ( ) Screw, Hexssm 8x ( ) Washer Flt.8Ss 0686 ( ) Washer--Belleville. Pltd ( xxxxxx-- ) Gearbox, W/Mount (See Breakdowns) ( xxxxxx-- ) Screw, Hex, M8 Ss ( xxxxxx-- ) Washer, Flt. Ss ( ) Label Set, Info & Hazard, Max Prot SS MM49 (-99) -4

51 STANDARD PARTS Fig. - Scrub Head Mount Group for MaxProt 000 Two-Brush System Ref. Tennant Part No. Machine Serial Number Description Qty. 45 ( ) Link, Scrubber Head Lift ( ) Fitting, Grease ( ) Spacer, Washer ( ) Bar, Spacer SS MM49 (0-96)

52 STANDARD PARTS Fig. - Scrub Head Stop and Squeegee Mount Group for MaxProt 000 Two-Brush System Ref. Tennant Part No. Machine Serial Number Description Qty. 508 ( ) Bracket, Stop 50 ( ) Bumper 89 ( ) Bumper, Rubber ( ) Lever, Stop ( ) Spring, Tension ( ) Guide, Squeegee ( ) Spacer,.50 ODX.4IDX.L Ss ( ) Tube 55SS MM49 (4-96) -45

53 STANDARD PARTS Fig. 4 - Scrub Head Lift Group for MaxProt 000 Two-Brush System SS MM49 (4-96)

54 STANDARD PARTS Fig. 4 - Scrub Head Lift Group for MaxProt 000 Two-Brush System Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Bracket, Head Lift 5648 ( ) Bearing, Flange Bore 6544 ( ) Spring, Die, Red, 4.0Lg ( ) Pin,Clevis,0.50 Dia.X.87 Lg ( ) Bracket, Head Lift ( ) Spring Comp Die X.5Lg ( ) Scr--Hx M0X Pltd ( ) Scr--Hex MX Full Thd ( ) Actuator, Scrubhead Lift ( ) Pin,Clevis,0.50 Dia.X.50 Lg 49 ( ) Pin, Clevis.50 Dia X 5.75 Lg 55SS MM49 (0-96) -47

55 STANDARD PARTS Fig. 5 - Edge Scrub Group for MaxProt 000 Two-Brush System SS MM49 (4-96)

56 STANDARD PARTS Fig. 5 - Edge Scrub Group for MaxProt 000 Two-Brush System Ref. Tennant Part No. Machine Serial Number Description Qty. 689 ( ) Bracket, Mtg, Actuator 0685 ( ) Washer Flt. Ss ( ) Scr Hexssm 8X ( ) Actuator, Edge Scrub, ( ) Pin,Clevis,0.50 Dia.X.87 Lg ( ) Bracket Wldt, Pivot 7 58 ( ) Pin,Clevis,0.7 Dia.X. Lg 8 69 ( ) Bracket Wldt, Gas Spring ( ) Spring, Gas 0Lb 8.04 Stroke ( ) Stud, Ball, Gas Spring 655 ( ) Cable, Retaining, Side Scrub ( ) Nut, Retainer ( ) Nut--Hxlocnyln.--8 Thin Pltd ( ) Scr Hexssm 8X ( ) Nut--Hxlocnyln M 8X.5 Reg Ss 55SS MM49 (9-97) -49

57 STANDARD PARTS Fig. 6 - Solution Valve Group for MaxProt 000 Two-Brush System SS MM49 (-98)

58 STANDARD PARTS Fig. 6 - Solution Valve Group for MaxProt 000 Two-Brush System Ref. Tennant Part No. Machine Serial Number Description Qty ( ) oke Assembly 48 ( ) Cable, Control 060 ( ) Valve, Water ( ) Lever, Valve ( ) Fitting, Barbed Elbow ( ) Clamp, Worm Drive ( ) Hose, Vinyl ( ) Fitting, Barbed Elbow ( ) Hose, Vinyl 0 45 ( ) Fitting, Barbed Tee ( ) Hose, Vinyl ( ) Hose, Vinyl 4544 ( ) Fitting, Straight ( ) Fitting, Barbed Elbow 5 65 ( ) Hose--Heater.6Id 4.5L ( ) Fitting, Reducer, 5/8--/ ( ) Bracket, Mtg, Elect Valve ( ) Ftg, Plstc, Str, Barb.75Pt--.6Hse ( ) Valve, Water, Sol.6 Hose 6V ( ) Scr Hex Ss M6x SS MM49 (-98) -5

59 STANDARD PARTS Fig. 7 - Right Side Squeegee Group for MaxProt 000 Two-Brush System Ref. Tennant Part No. Machine Serial Number Description Qty. 707 ( ) Right Side Squeegee Group Assembly 5645 ( ) Bracket, R.H. 405 ( ) Pin, Clevis 4445 ( ) Screw, Socket ( ) Spacer ( ) Frame, Side Squeegee, R.H ( ) Squeegee Assembly, Side ( ) Retainer, Squeegee ( ) Guide, Side Squeegee ( ) Pin, Clevis ( ) Pin, Hair Cotter ( ) Bearing, Thrust ( ) Bar, Mounting 5047 ( ) Spring, Extension ( ) Bar, Squeegee Lift ( ) Bearing ( ) Angle, Stop ( ) Angle -5 55SS MM49 (0-96)

60 Fig. 8 - Left Side Squeegee Group for MaxProt 000 Two-Brush System STANDARD PARTS Ref. Tennant Part No. Machine Serial Number Description Qty. 70 ( ) Left Side Squeegee Group Assembly 5647 ( ) Bracket, L.H. 405 ( ) Pin, Clevis 4445 ( ) Screw, Socket ( ) Spacer ( ) Frame, Side Squeegee, L.H ( ) Squeegee Assembly, Side ( ) Retainer, Squeegee ( ) Guide, Side Squeegee ( ) Pin, Clevis ( ) Pin, Hair Cotter ( ) Bearing, Thrust ( ) Bar, Mounting 5047 ( ) Spring, Extension ( ) Bar, Squeegee Lift ( ) Bearing ( ) Angle, Stop ( ) Angle 55SS MM49 (0-96) -5

61 STANDARD PARTS Fig. 9 - Scrubhead Drive Group for MaxProt 00 Three-Brush System SS MM49 (-99)

62 STANDARD PARTS Fig. 9 - Scrubhead Drive Group for MaxProt 00 Three-Brush System Ref. Tennant Part No. Machine Serial Number Description Qty. 600 ( ) Frame Wldt, Mounting, Scrub Hd 64 ( ) Motor, Ele (See Breakdowns) 664 ( xxxxxx ) Gearbox, (Repl. by 75075) (See Breakdowns) 4 6 ( xxxxxx ) Gearbox, (Repl. by 75074) (See Breakdowns) 5 96 ( ) Scr Hex.8--6X ( ) Washer Flt.8 Sae ( ) Hub, Brush Drive ( ) Scr Hexssm 8X ( ) Washer Flt.8 Ss ( ) Washer--Belleville. Pltd 0097 ( ) Key Square Lg 66 ( ) Skirt, Scrub Head Front 797 ( ) Rivet, Plastic.5Dx ( ) Washer--Flt.5 Fender Pltd 5 66 ( ) Wheel, Guide, Scrubhead 6 60 ( ) Sleeve,.44B X.65D X.9Lg ( ) Scr Hex Ssm 8X ( ) Washer Flt. Ss ( ) Nut--Hxlocnyln M 8X.5 Reg Ss 0 64 ( xxxxxx ) Bracket, Stop, Scrubhead 96 ( ) Pin, Roller 78 ( ) Roller, Bumper 758 ( ) Breaker--Circuit, 40 Resetable 4 75 ( xxxxxx-- ) Gearbox, W/O Mount (See Breakdowns) ( xxxxxx-- ) Gearbox, W/O Mount (See Breakdowns) ( xxxxxx-- ) Bracket, Mount ( xxxxxx-- ) Screw, Hex.8 Ss x ( xxxxxx-- ) Washer, Flat.8 Ss ( xxxxxx-- ) Screw, Hex. Ss x ( xxxxxx-- ) Washer, Flat. Ss ( xxxxxx-- ) Screw, Hex. Ss x ( xxxxxx-- ) Stop Wldt, Scrubhead ( xxxxxx-- ) Plate, Spacer ( xxxxxx-- ) Spacer, Square ( ) Label Set, Info & Hazard, Max Prot 00 55SS MM49 (6-00) -55

63 STANDARD PARTS Fig. 0 - Scrub Head Lift Group for MaxProt 00 Three-Brush System SS MM49 (0-96)

64 STANDARD PARTS Fig. 0 - Scrub Head Lift Group for MaxProt 00 Three-Brush System Ref. Tennant Part No. Machine Serial Number Description Qty. 69 ( ) Bracket, Mtg, Lift Link 0908 ( ) Scr Hexssm 0X ( ) Nut--Hxlocnyln M0X.5 Reg ( ) Bracket Assy, Head Lift ( ) Bearing, Flange.65 Bore ( ) Sleeve,.4B.6D ( ) Scr Hexssm 8X ( ) Washer Flt. Hard 9 60 ( ) Roller, Mounting, Brush Head 0 77 ( ) Sleeve,.44B.6D.9 Bronze 0484 ( ) Bearing, Flange.65 Bore ( ) Screw Hex Ssm 8X SS MM49 (0-96) -57

65 STANDARD PARTS Fig. - Edge Scrub Group for MaxProt 00 Three-Brush System SS MM49 (0-96)

66 STANDARD PARTS Fig. - Edge Scrub Group for MaxProt 00 Three-Brush System Ref. Tennant Part No. Machine Serial Number Description Qty. 66 ( ) Bracket, Mtg, Gas Shock 0685 ( ) Washer Flt. Ss 5675 ( ) Scr Hexssm 8X.5ls ( ) Spring, Gas 0Lb 8.04 Stroke ( ) Stud, Ball, Gas Spring ( ) Cable, Retaining, Side Brush ( ) Nut, Retainer ( ) Nut--Hxlocnyln.--8 Thin Pltd ( ) Scr Hexssm 8X ( ) Washer Flt. Ss 087 ( ) Nut--Hxlocnyln M 8X.5 Reg Ss 407 ( ) Bracket, Retainer 55SS MM49 (9-97) -59

67 STANDARD PARTS Fig. - Scrub Head Stops and Squeegee Mount Group for MaxProt 00 Three-Brush System Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Lever, Stop 5649 ( ) Tube, Rnd,.4B.00D.0Lg 090 ( ) Scr HexssM 8X ( ) Nut--Hxlocnyln M 8X.5 Reg Ss ( ) Sprng,Tens,0.56Odx.05Wire 0.9L ( ) Guide, Sqge Mtg ( ) Tube, Rnd,.4B.50D.7Lg ( ) Scr HexssM 8X ( ) Washer Flt. Hard ( ) Bracket, Stop, Frame 50 ( ) Bumper, Polyethylene 0685 ( ) Washer Flt. Ss 0908 ( ) Scr Hexss M0X ( ) Washer--Flt.8 Ss ( ) Nut--Hxlocnyln M0X.5 Reg ( ) Bumper, Rubber ( ) Screw HexssM 5X ( ) Nut--Hxlocnyln M 5X0.8 Reg ( ) Bar Assembly, Weight SS MM49 (0-96)

68 Fig. - Scrub Head Mount Group for MaxProt 00 Three-Brush System STANDARD PARTS Ref. Tennant Part No. Machine Serial Number Description Qty. 668 ( ) Bumper, Side 49 ( ) Washer Flt. Hard ( ) Scr Hexssm 8X ( ) Tread, Floor 5 6 ( ) Link Wldt, Head, Drag ( ) Ftg, Grease.5--8Th Strt.47L ( ) Spacer, Washer 8 64 ( ) Bracket Wldt, Mtg, Drag Link ( ) Screw Hexssm X ( ) Nut--HxlocnynmmX.75 Reg Ss 6458 ( ) Tread, Floor 55SS MM49 (0-96) -6

69 STANDARD PARTS Fig. 4 - Solution Group for MaxProt 00 Three-Brush System SS MM49 (-98)

70 STANDARD PARTS Fig. 4 - Solution Group for MaxProt 00 Three-Brush System Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Hose, Vinyl,Clr,.75Idx 6.Lg 8684 ( ) Clamp--Wormdrive D 7950 ( ) Manifold, Plastic ( ) Ftg,Plstc,Elb,Barb.50Pt--.75Hse ( ) Ftg--Plug Npt 0Pm Hx Hd Plasti ( ) Hose, Vinyl Clr,.50Id X 8.Lg 7 6 ( ) Hose, Vinyl, Clear ( ) Fitting, Plastic, Str,Ba.Id ( ) Ftg,Plstc,Elb,Barb.50Hs--.50Hse ( ) Clamp--Cable,.69Dia. 6Wth ( ) Scr Hexssm 8X SS MM49 (0-96) -6

71 STANDARD PARTS Fig. 5 - Right Side Squeegee Group for MaxProt 00 Three-Brush System SS MM49 (0-96)

72 STANDARD PARTS Fig. 5 - Right Side Squeegee Group for MaxProt 00 Three-Brush System Ref. Tennant Part No. Machine Serial Number Description Qty. 6 ( ) Squeegee Assy, Side, Rh 65 ( ) Frame Wldt, Side Squeegee, Rh 568 ( ) Bar, Mtg 5675 ( ) Scr Hexssm 8X ( ) Blade Assy, Squeegee, Side ( ) Guide, Side Squeegee ( ) Retainer, Squeegee ( ) Pin,Clevis,0. Dia X.00 Lg ( ) Pin,Hair Cotter #Lhcot--,Leitk ( ) Bracket, Wldt, Rh ( ) Bar, Sqge Lift 647 ( ) Bearing,.50X ( ) Bearing, Thrust ( ) Washer Flt. Ss ( ) Scr--Butn M8X.5 6 Ss ( ) Scr--Butn M8X Pltd ( ) Nut--Hxlocnyln M 8X.5 Reg Ss ( ) Pin Clevis 0.7 Dia X.00 Lg ( ) Spring, Tension,.750X.05X ( ) Scr Hexssm 6X ( ) Scr Hexssm 8X ( ) Blade, Side Squeegee, Front 666 ( ) Retainer, Mtg, Front Blade 447 ( ) Nut--Hxlocnyln.--8 Regss ( ) Scr Soc M8X ( ) Nut Hx Ss M 8X ( ) Angle, Stop, Side Squeegee ( ) Angle, Mtg, Squeegee Lift ( ) Chain, Double Scrub ( ) Scr Hexssm 8X ( ) Washer Flt. Ss ( ) Brkt Wldt, Sq Lift 6445 ( ) Bearing, Sq Lift 6446 ( ) Spacer ( ) Scr Hexssm 8X ( ) Nut Hx Ss M 8X.5 55SS MM49 (0-96) -65

73 STANDARD PARTS Fig. 6 - Left Side Squeegee Group for MaxProt 00 Three-Brush System SS MM49 (0-96)

74 STANDARD PARTS Fig. 6 - Left Side Squeegee Group for MaxProt 00 Three-Brush System Ref. Tennant Part No. Machine Serial Number Description Qty. 70 ( ) Squeegee, Side Left Hand 4677 ( ) Frame Wldt, Side Squeegee, Lh 568 ( ) Bar, Mtg 5675 ( ) Scr Hexssm 8X ( ) Squeegee, Side ( ) Guide, Side Squeegee ( ) Retainer, Squeegee ( ) Pin,Clevis,0. Dia X.00 Lg ( ) Pin,Hair Cotter #Lhcot--,Leitk ( ) Bracket Wldt, Lh ( ) Bar, Squeegee Lift 647 ( ) Bearing,.50X ( ) Bearing, Thrust ( ) Washer Flt. Ss ( ) Scr--Butn M8X.5 6 Ss ( ) Scr--Butn M8X Pltd ( ) Nut--Hxlocnyln M 8X.5 Reg Ss ( ) Pin Clevis 0.7 Dia X 0.75 Lg ( ) Spring Extension ( ) Angle ( ) Spacer 090 ( ) Scr Hexssm 8X ( ) Scr Soc M8X ( ) Nut Hx Ss M 8X ( ) Angle, Stop, Side Squeegee ( ) Scr Hexssm 6X.0 55SS MM49 (0-96) -67

75 STANDARD PARTS Fig. 7 - Rear Squeegee Mount Group SS MM49 (9-98)

76 STANDARD PARTS Fig. 7 - Rear Squeegee Mount Group Ref. Tennant Part No. Machine Serial Number Description Qty. 655 ( ) Bracket, Mtg, Squeeggee 5990 ( ) Bracket, Hose, Sqge ( ) Scr Hexssm 8X ( ) Washer Flt. Ss ( ) Nut--Hxlocnyln M 8X.5 Reg Ss 6 6 ( ) Pivot, Lift, Squeegee 7 7 ( ) Scr Hexssm0X ( ) Washer--Flt.8 Ss ( ) Nut--Hxlocnyln M0X.5 Reg ( ) Spring, Comp.50Id.00Od ( ) Screw Hex Ssm 0X ( ) Nut Hx Flange M0X.5 75 ( ) Bracket,Caster ( ) Scr Hexssm 0X ( ) Caster Kit, Sealed..0Dia 6 70 ( ) Caster, Swivel, Sealed.0Dia ( ) Washer,.5B.75D.Cr.Znc 8 5 ( ) Nut Hx Jam ( ) Bolt--Eye,.5--0Th.5B.4L ( ) Nut--Hxlocnyln.5--0 Regss SS MM49 (9-98) -69

77 STANDARD PARTS Fig. 8 - Rear Squeegee Group Ref. Tennant Part No. Machine Serial Number Description Qty. 704 ( ) Frame, Squeegee 4575 ( ) Squeegee Assembly, Front 404 ( ) Rear Squeegee Kit ( ) Gasket, Squeegee 5 54 ( ) Bracket, Retainer ( ) Bumper, Squeegee ( ) Pin, Hitch ( ) Strip, Retaining ( ) Cover, Squeegee, L.H ( ) Cover, Squeegee, R.H SS MM49 (0-96)