6500D *330290* Parts Manual Rev. 06

Transcription

1 600D Parts Manual Rev. 06 *33090*

2 This manual is furnished with each new TENNANT Model 600D. This manual consists of the How To Use This Manual; Standard Parts; Options; Breakdowns; Engine Breakdown; and Cross Reference sections. MACHINE DATA Please fill out at time of installation for future reference. Machine Model Number D Machine Serial Number -- Machine Options -- TENNANT Representative/phone no. -- Customer ID Number -- Date of Installation -- Manual Number Revision: 06 Published: 9--0 Copyright E 998, 999, 000, 00, 00 TENNANT, Printed in U.S.A.

3 This section on HOW TO USE THIS MANUAL will tell you how to: -- Find important machine information for ordering correct repair parts. -- Find TENNANT part numbers. -- Order TENNANT parts and supplies. HOW TO USE THIS MANUAL HOW TO USE THIS MANUAL IMPORTANT INFORMATION When placing an order for parts, the machine model and machine serial number are important. Refer to the MACHINE DATA box which is filled out during the installation of your machine. The MACHINE DATA box is located on the inside of the front cover of this manual. The model number of your machine is on the side of the machine. The serial number of your machine is printed on the machine data plate located as shown. 600D ( -98) -

4 HOW TO USE THIS MANUAL FINDING A TENNANT PART NUMBER This manual contains the following sections: -- HOW TO USE THIS MANUAL -- STANDARD PARTS -- OPTIONS -- BREAKDOWNS -- CROSS REFERENCE The STANDARD PARTS section lists repair parts for standard machines. They are grouped in this general order: -- General wear parts. -- Machine frame and related parts. -- Machine propelling system. -- Scrubbing components. -- Electrical parts. The OPTION section lists repair parts of options. The BREAKDOWN section lists available repair parts of major components. All sections in this manual consist of parts illustrations and corresponding parts lists. The parts illustrations are numbered with Ref numbers which refer to corresponding parts lists. The parts lists include a number of columns of information: -- Ref -- column refers to the reference number on the parts illustration. -- indicates the part is an assembly. -- indicates the part is included in the assembly listed just before it. -- TENNANT Part No. -- column lists the TENNANT part number for the part. -- Serial Number -- column indicates the set of machines the part number is applicable to. Serial numbers change when the machine design has been modified. The most current design of the machine is shown in the main illustration, older designs are boxed in a corner of the illustration. -- Description -- column is a brief description of the part. -- Qty. -- column lists the quantity of that part used in that area of the machine D ( -98)

5 HOW TO USE THIS MANUAL NOTE: If a service kit is installed on your machine, be sure to keep the INSTRUCTION BULLETIN which came with the kit. It contains repair parts numbers needed for ordering future parts. NOTE: Fasteners used in this machine may be metric or non-metric. Take care when replacing hardware to replace with same thread size. PLACING AN ORDER Orders may be placed by phone, fax, or by mail. Phone orders may need written confirmation. Follow the steps below to insure prompt delivery:. Identify the model number of your machine.. Identify the serial number of your machine. 3. Find the part number of the part you need. Do not order by page number or reference number. If you are not able to find the part number, call your TENNANT representative for help or send the old part as a sample. 4. Determine the quantity of the part you need.. Provide the following company information: -- Company name -- Customer ID Number -- Shipping address -- Billing address -- First and last name of person ordering parts -- Telephone number -- Purchase order number 6. Provide definitive shipping instructions. 600D ( -98) -3

6 HOW TO USE THIS MANUAL Any claim for loss or damage to a shipment in transit should be filed promptly with the transportation company making the delivery. Shipments will be complete unless the packing list or order acknowledgement indicates items back ordered. If parts received are suspected to be incorrect or defective, please contact the TENNANT representative from whom you ordered the part. They will give authorization for return and/or handle replacement shipments when required D ( -98)

7 STANDARD PARTS SECTION Contents Page Contents Page Fig. -- General Recommended Maintenance Items... - Fig. -- Replacement Brushes... - Fig Main Frame Group Fig Right Brush Door Group Fig. -- Left Brush Door Group Fig Seat and Shroud Group Fig Right Grille Group... - Fig Left Grille and Hydraulic Cooler Group Fig Engine Cover Group Fig Engine Side Door Group Fig. -- Steering and Firewall Group Fig. -- Instrument Panel Assembly... - Fig Side Instrument Panel Group Fig Circuit Breaker and Relay Group. -6 Fig. -- Engine and Governor Group Fig Engine Mount Group Fig Air Cleaner Group Fig Alternator and Engine Fan Group -34 Fig Muffler Group ( ). -3 Fig Muffler Group ( ) Fig. -- Fuel Tank Group Fig. -- Radiator Group Fig Battery Group Fig Rear Drive Wheel Group Fig. -- Rear Wheel Assembly Fig Front Wheel and Brakes Group Fig Brake Lever and Pedal Group Fig Directional Pedal Group... - Fig Hydraulic Pump Linkage Group.. -4 Fig Hopper Group (Metal Hopper) Fig Hopper Group (Plastic Hopper).. -8 Fig Hopper Dump Door Group (Metal Hopper) Fig Hopper Cylinder and Dust Door Group (Metal Hopper) Fig Hopper Cylinder and Dump Door Group (Plastic Hopper) Fig Hopper Hood and Bumper Group (Metal Hopper) Fig Hopper Hood Group (Plastic Hopper) Fig Hopper Bumper Group (Plastic Hopper) Fig Filter Box Group (Metal Hopper). -7 Fig Filter Box Group (Plastic Hopper) -74 Fig Hopper Lift Arms Group Fig Side Brush Motor and Pivot Group -78 Fig Side Brush Lift Group Fig Main Brush Lift Group ( ) Fig Main Brush Lift Group ( ) Fig Main Brush Drive Group ( ) Fig Main Brush Drive Group ( ) Fig Vacuum Fan Group Fig Vacuum Fan Motor and Fittings Group Fig Hydraulic Schematic (Metal Hopper) Fig Hydraulic Schematic (Plastic Hopper) Fig. -- Hydraulic Hose Group (Metal Hopper) Fig. -- Hydraulic Hose Group (Plastic Hopper) Fig Hydraulic Reservoir Group Fig Hydraulic Valve Group Fig. -- Hydraulic Pumps Group Fig Electrical Schematic ( ) Fig Electrical Schematic ( )... - Fig Wire Harnesses Group ( ) Fig Wire Harnesses Group ( )... - Fig Label Group D (9-0) -

8 STANDARD PARTS Fig. - General Recommended Maintenance Items 600, D, NA Ref. Tennant Part No. Machine Serial Number Description Qty. o ( ) Performance Pkg 400Hr Die 3L 80 ( ) Element, Air Filter 849 ( ) Filter, Oil ( ) Filter, Fuel 844 ( ) Filter, Fuel, Element ( ) Fluid, Hyd Oil, Shp /40 Gal ( ) Filter Element Ph o ( ) Kit, Maintenance, 800Hr 7803 ( ) Circuitbreaker,.0a, Resetable ( ) Switch 9687 ( ) Seal 968 ( ) Seal 3797 ( ) Skirt ( ) Skirt 490 ( ) Skirt, Deflector 9680 ( ) Skirt, Lip 968 ( ) Skirt, Lip ( ) Skirt, Lip ( ) Skirt, Lip 4089 ( ) Skirt 803 ( ) Seal, Door, Dump, Hppr, Rear 90 ( ) Seal, Door, Dump, Hppr, Rear 884 ( ) Retainer, Seal, Hppr,. X.8 X 40.3l ( ) Kit, Fltr, Fine Particle 36 ( ) Stud, Wheel,.0--0 X ( ) Nut, Wheel,.0--0 X 60 Angle ( ) Key, Switch, Set Of Two 6490 ( ) Kit, Replmt, Seal 933 ( ) Kit, Seal, Hyd ( ) Kit, Seal, Hyd 798 ( ) Kit, Seal, Hyd, Valve o 3838 ( ) Kit, Maintenance, 800Hr 3837 ( ) Circuitbreaker,.0a ( ) Switch 9687 ( ) Seal 968 ( ) Seal 3797 ( ) Skirt ( ) Skirt 490 ( ) Skirt, Deflector 9680 ( ) Skirt, Lip 968 ( ) Skirt, Lip ( ) Skirt, Lip ( ) Skirt, Lip 4089 ( ) Skirt 803 ( ) Seal, Door, Dump, Hppr, Rear 90 ( ) Seal, Door, Dump, Hppr, Rear 884 ( ) Retainer, Seal, Hppr,. X.8 X 40.3l ( ) Kit, Fltr, Fine Particle 36 ( ) Stud, Wheel,.0--0 X ( ) Nut, Wheel,.0--0 X 60 Angle - 600D (9-0)

9 Ref. Tennant Part No. Fig. - General Recommended Maintenance Items STANDARD PARTS Machine Serial Number Description Qty ( ) Key, Switch, Set Of Two 6490 ( ) Kit, Replmt, Seal 933 ( ) Kit, Seal, Hyd ( ) Kit, Seal, Hyd 798 ( ) Kit, Seal, Hyd, Valve o 7067 ( ) Maint Kit, Skirts 3L 9687 ( ) Seal, Door, Dump, Side 9688 ( ) Strap, Door, Dump, Side ( ) Scr Hexssm 6X ( ) Washer Flt. Ss ( ) Nut--Hxlocnyln M 6X.0 Reg Ss ( ) Cord, Sponge 968 ( ) Seal, Door, Dump 9686 ( ) Strap, Door, Dump ( ) Scr Hexssm 6X ( ) Washer Flt. Ss 087 ( ) Nut--Hxlocnyln M 6X.0 Reg Ss 6 o 7068 ( ) Maint Kit, Seals 3L 9680 ( ) Skirt, Lip 968 ( ) Skirt, Lip 890 ( ) Strap, Main Lip 0900 ( ) Scr Hexssm 8X. 068 ( ) Washer Flt.3 Ss 0873 ( ) Nut--Hxlocnyln M 8X. Reg Ss 4089 ( ) Skirt, Side, Sbdc, Lh 403 ( ) Plate, Retainer, Lh 404 ( ) Plate, Retainer, Front, Lh 49 ( ) Scr--Hxfmgm 6X.0 0 Pltd ( ) Washer Flt. Ss 6 o ( ) Kit, Maint Seal, Hopper Door ( ) Seal, Door, Dump ( ) Plate, Retainer, Dump Door ( ) Bolt, Carriage, M06x ( ) Washer Flt. Ss ( ) Nut--Hxlocnyln M 6X.0 Reg Ss ( ) Seal, Door, Dump, Side ( ) Strap, Door, Dump, Side 0876 ( ) Screw--Hexssm 6x ( ) Washer Flt. Ss ( ) Nut--Hxlocnyln M 6X.0 Reg Ss 8 o ( ) Kit, Maint Skirt, Hopper ( ) Skirt, Lip ( ) Skirt, Lip ( ) Strap, Main Lip ( ) Bolt, Carriage, M08x. 068 ( ) Washer, Flt.3Ss 0873 ( ) Nut--Hxlocnyln M 8X. Reg Ss 4089 ( ) Skirt, Side, Sbdc, Lh ( ) Plate, Retainer ( ) Plate, Retainer 600D (9-0) -3

10 STANDARD PARTS Fig. - General Recommended Maintenance Items Ref. Tennant Part No. Machine Serial Number Description Qty. 39 ( ) Screw--Hexssm 6x ( ) Washer Flt. Ss D (9-0)

11 STANDARD PARTS Fig. - Replacement Brushes 3 Fig. - Replacement Brushes , 60E Ref. Tennant Part No. Machine Serial Number Description Qty. 497 ( ) Brush--Sweep Spl--4Lg--4 Single Row--Fiber and Wire 49 ( ) Brush--Sweep Spl--4Lg--4 Single Row--Nylon 493 ( ) Brush--Sweep Spl--4Lg--8 Double Row--Nylon 49 ( ) Brush--Sweep Spl--4Lg--8 Double Row--Poly and Wire 9440 ( ) Brush--Sweep Spl--4Lg--8 Double Row--Wire 6609 ( ) Brush--Sweep Spl--4Lg--8 Double Row--Poly 6608 ( ) Brush--Sweep Spl--4Lg-- Double Row--Nylon ( ) Brush--Sweep Spl--4Lg--Wedg Poly ( ) Brush--Sweep Spl--4Lg--Wndo Poly 3 0N ( ) Brush--Side Swp --6 Dia--Nylon 3 4 ( ) Brush--Side Swp --6 Dia--Flatwire ( ) Brush--Side Swp --6 Dia--Poly 600D (6-99) -

12 STANDARD PARTS Fig. 3 - Main Frame Group D (9-0)

13 STANDARD PARTS Fig. 3 - Main Frame Group , NA Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Frame Wldt, Main ( ) Frame Wldt, Main ( ) Spring Assy, Recirculation ( ) Skirt, Hopper, Top ( ) Strap, Backing, Hopper 0934 ( ) Chain, Link#/0, Links Plain ( ) Blade, Deflector ( ) Skirt, Recirculation, Turf (Option) ( ) Strip, Retainer, Seal 8 48 ( ) Bracket, Flap, Recirculation 9 49 ( ) Channel, Retainer, Seal, Rear ( ) Channel, Retainer, Seal, Rear ( ) Skirt, Seal, M Br ( ) Skirt, Seal, M Br 349 ( ) Insulation, Acoustic, Firewall 69-- ( ) Molding, Trim --4Ga ( ) Bolt--Carrm 8X Pltd ( ) Plugbtn.38H Blacknyl ( ) Washer, Flat,.3 Ss ( ) Panel, Engine 7 64 ( ) Horn, V ( ) Clamp -- Cable,.69 Dia.6 Wth ( ) Clamp, Hose ( ) Rivet, Plastic.3x ( ) Wire Assy, Horn Ground, 6 Ga x ( ) Cable, 9 Bundle Dia ( ) Plugbtn.6H Blacknyl ( ) Screw, Hex, M08--. X 30, Ss ( ) Washer, Flat,. Ss ( ) Nut, Hex, Lock, M08--.,Nl,Ss 8 600D (9-0) -7

14 STANDARD PARTS Fig. 4 - Right Brush Door Group ALL Ref. Tennant Part No. Machine Serial Number Description Qty. 976 ( ) Door Wldt, Brush, Rh 70 ( ) Hinge, Door, Brush 3 99 ( ) Latch, Hook, Rh 4 99 ( ) Latch, Bolt 3797 ( ) Skirt Assy, Brush Door, Rh ( ) Strip, Retainer, Skirt ( ) Seal, Door, Brush, Rh 8 78 ( ) Bracket, Mtg, Hinge, Rh ( ) Skirt, Deflector ( ) Strap, Deflector 6993 ( ) Seal, Foam Rbr 8770 ( ) Strip, Retainer ( ) Strap ( ) Rivet, Plastic.0x ( ) Seal, Rbr,.3 x.7 x D (6-99)

15 STANDARD PARTS Fig. - Left Brush Door Group ALL Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Door Wldt, Brush, Lh 70 ( ) Hinge, Door, Brush ( ) Latch, Hook, Lh 4 99 ( ) Latch, Bolt ( ) Skirt Assy, Brush Door, Lh ( ) Strip, Retainer, Skirt ( ) Skirt, Deflector ( ) Strap, Deflector 9 79 ( ) Bracket, Mtg, Hinge, Lh ( ) Seal, Foam Rbr 8770 ( ) Strip, Retainer 694 ( ) Strap ( ) Rivet, Plastic.0x ( ) Seal, Door, Brush, Lh 330 ( ) Seal, Rbr,.3 x.7 x D (6-99) -9

16 STANDARD PARTS Fig. 6 - Seat and Shroud Group D (9-0)

17 STANDARD PARTS Fig. 6 - Seat and Shroud Group , IC, NA Ref. Tennant Part No. Machine Serial Number Description Qty. 897 ( ) Panel Wldt, Sppt, Seat 4030 ( ) Panel, Inside ( ) Bracket ( ) Insulation, Acoustic, Panel 3837 ( ) Panel, Filler, Upper ( ) Bracket, Inside o ( ) Plate, Floor w/tread ( ) Pad, Tread ( ) Molding, Trim --4Ga ( ) Molding, Trim --4Ga ( ) Cover Wldt, Sppt, Seat 98 ( ) Insulation, Acoustic, Seat ( ) Pin,Hair Cotter #Lhcot--,Leitk 4 46 ( ) Rod Wldt, Seat 349 ( ) Insulation, Acoustic, Plate ( ) Cable 7 40 ( ) Rail, Seat, Rh ( ) Seat 9 89 ( ) Nut, U M 8X. Pltd ( ) Plugbtn.44H 600D (9-0) -

18 STANDARD PARTS Fig. 7 - Right Grille Group D (9-0)

19 STANDARD PARTS Fig. 7 - Right Grille Group D Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Sprng, Tens, 0.0 Odx.0 Wire.L 6997 ( ) Src--Hex Mx Pltd ( ) Tip, Rubber 4 44 ( ) Scr--Hex.38--6x.0 Full Thd 7049 ( ) Bracket, Stop Bolt, Rear Grill 6 99 ( ) Latch, Bolt ( ) Latch, Hook, RH ( ) Bracket, Mtg. Latch ( ) Washer--Belleville.0 Pltd ( ) Bracket, Grille 648 ( ) Bearing, Flange 776 ( ) Pin, Pivot, Upper ( ) Channel Wldt, Corner Post ( ) Grille, Right 0694 ( ) Screw, Hex, M06 X.0 X 30, ( ) Channel, Post, Corner ( ) Screw, Hex, M08 X. X 0, ( ) Washer, Flt,.3 Std ( ) Bracket, Hinge ( ) Screw, Hex, M X.7 X 0, ( ) Washer, Belleville, ( ) Nut, Hex, Lock, M X.7,Nl ( ) Hinge ( ) Washer, Flt,.0 Std 434 ( ) Screw, Hex, M X.7 X, ( ) Nut, Hex, Lock, M08 X., Nl ( ) Plate, Mtg, Latch ( ) Screw, Hex, M06 X.0 X 6, ( ) Washer, Flt,. Std ( ) Latch Assy, Door Holder, Rbr ( ) Nut, Hex, Lock, M06 X.0, Nl 600D (9-0) -3

20 STANDARD PARTS Fig. 8 - Left Grille and Hydraulic Cooler Group D (9-0)

21 STANDARD PARTS Fig. 8 - Left Grille and Hydraulic Cooler Group , IC, NA, CE Ref. Tennant Part No. Machine Serial Number Description Qty. o 69 ( ) Filter Assy, Spin--On 0Micron 740 ( ) Filter Element Ph ( ) Grille, Left ( ) Sprng, Tens, 0.0 Odx.0 Wire.L 6997 ( ) Scr--Hex Mx Pltd ( ) Washer--Belleville.0 Pltd ( ) Scr--Hex.38--6x.00 Full Thd ( ) Bracket, Rear Grill Stop Bolt 9 70 ( ) Bracket, Mtg, Latch ( ) Latch, Hook, Lh 99 ( ) Latch, Bolt 3466 ( ) Clamp, Hose ( ) Cooler--Hyd ( ) Ftg--Hyd E90 Jm/Om 608 ( ) Ftg--Hyd E4 Jm/Om ( ) Clamp--Cable,.Dia.00Wth ( ) Sleeve--Nyln #4 30.0L ( ) Bracket, Grille ( ) Bearing, Flange ( ) Pin, Pivot, Upper 038 ( ) Tip, Rubber 393 ( ) Nut, Hex, Std, M08 X ( ) Bracket, Hinge ( ) Nut, Hex, Lock, M X.7,Nl 6997 ( ) Screw, Hex, M X.7 X 40, ( ) Washer, Belleville, ( ) Hinge ( ) Screw, Hex, M X.7 X, ( ) Washer, Flt,.0 Std ( ) Screw, Hex, M08 X. X 0, ( ) Washer, Flt,.3 Std 600D (9-0) -

22 STANDARD PARTS Fig. 9 - Engine Cover Group D ( -98)

23 STANDARD PARTS Fig. 9 - Engine Cover Group IC Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Cover Wldt, Engine 909 ( ) Foam, Engine Cover ( ) Foam, Engine Cover, Bottom 4 7 ( ) Nut, U M 6X.0 Pltd ( ) Plate Wldt, Cover, Bottom ( ) Plate, Deflector, Engine Cover ( ) Bracket, Deflector, Eng Cover ( ) Plate, Deflector, Eng Cover 9 94 ( ) Latch 0 99 ( ) Latch, Bolt 704 ( ) Bracket, Latch, Bolt, Eng Cover ( ) Handle Assy, Latch, Eng Cover ( ) Rod, Latch, Engine Cover o ( ) Spring--Gas Assy, Eng Cover 649 ( ) Clip, Spring ( ) Stud, Ball ( ) Insulation, Acoustic, Engine Cover ( ) Insulation, Acoustic, Engine Cover ( ) Bracket, Latch ( ) Sprng,Tens,0.0Odx.0Wire.0L 460 ( ) Balljoint D (6-99) -7

24 STANDARD PARTS Fig. 0 - Engine Side Door Group D ( -98)

25 STANDARD PARTS Fig. 0 - Engine Side Door Group JP, NA Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Hinge Wldt, Door, Engine 9830 ( ) Door Wldt ( ) Foam, Door, Engine, Side ( ) Bracket, Door 966 ( ) Latch 6 78 ( ) Spindle, Adjustment 7 74 ( ) Bolt, Latch ( ) Bracket, Latch, Door ( ) Seal, Rubber 600D (6-99) -9

26 STANDARD PARTS Fig. - Steering and Firewall Group D (9-0)

27 STANDARD PARTS Fig. - Steering and Firewall Group , D, NA Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Bracket Wldt, Valve 6379 ( ) Lever Wldt, Tilt ( ) Spring, Torsion 4 39 ( ) Pin,Clevis,0.37 Dia.X 3.00 Lg ( ) Pin,Clevis,0. Dia.X.44 Lg ( ) Knob, Tapered M ( ) Bracket Wldt, Mtg, Steering,Lh ( ) Bracket Wldt, Mtg, Steering,Rh ( ) Rod, Spring ( ) Sprng,Comp,0.74Idx.Wire.L 638 ( ) Bracket Wldt, Notched 793 ( ) Column, Steering 744 ( ) Cap, Tube ( ) Steer Control, Hyd (See Breakdowns) 4 47 ( ) Ftg--Hyd E4 Jm06/Om ( ) Sleeve--Nyln # L ( ) Tie, Cable 3.00D Max.4Lg ( ) U -- Bolt ( ) Cover, Steering ( ) Grommet,Rbr,.6Id,For.3Matl ( ) Wheel, Steering, 4 Dia X 36T 406 ( ) Clamp--Cable,.Dia.00Wth 3466 ( ) Clamp, Hose ( ) Molding, Trim --4Ga ( ) Molding, Trim --4Ga 0.00 o 637 ( ) Control Box, Governor, Die (Repl by 3747) 3746 ( ) Plug, Control Box 3747 ( ) Kit, Replmt, Control, Govnr, [All Purps] ( ) Block, Fuse ( ) Fuse, 40 Amp 8 03 ( ) Plug, Plastic.00 D ( ) Plate Wldt, Governor ( ) Nut--Hx Jam M0x. 4 Pltd ( ) Scr Hex Ss x ( ) Scr Hex Ss x ( ) Bracket Wldt, Valve ( ) Screw, Hex, M08 X. X 6, ( ) Washer, Flt,.3 Std 600D (9-0) -

28 STANDARD PARTS Fig. - Instrument Panel Assembly D (9-0)

29 STANDARD PARTS Fig. - Instrument Panel Assembly ,D, NA Ref. Tennant Part No. Machine Serial Number Description Qty. o ( ) Replm Kit, Instr Panel 9976 ( ) Replm Kit, Case 9977 ( ) Replm Kit, Seal o ( ) Replm Kit, Cir Board ( ) Replm Kit, Hourmeter 9979 ( ) Replm Kit, Touch Panel ( ) Replm Kit, Lamp, Backlighting (8) ( ( Replm Kit, Lamp, Fault (8) ( ) Grommet,Rbr,0.Id,For.09Matl ( ) Panel Assy, Instr 0 7 ( ) Nut, U M 6X.0 Pltd o 8736 ( ) Switch Ignition ( ) Key Set,Switch Ku ( ) Plate, Reinforcement--Ignition ( ) Boot, Switch 336 ( ) Boot, Switch, Ignition ( ) Tie, Cable, Nyl,.4l.9w 3.0 Max D o ( ) Panel, Instmt, W/ Label, [600] ( ) Gasket ( ) Seal, Foam ( ) Panel, Indicator Light 3490 ( ) Washer, Flt,. Std ( ) Nut, Hex, Lock, M06 X.0, Nl ( ) Gauge, Hourmeter, Electronic ( ) Gasket, Hourmeter 0946 ( ) Screw, Pan, M03 X 0. X, ( ) Washer, Lock, Int, # ( ) Nut, Hex, Std, M03 X ( ) Gauge, Fuel, 0--90ohm 8--8vdc ( ) Rivet, Plstc,.3d X ( ) Light, Panl, 4vdc,,. X ( ) Panel, Instmt, W/ Label, [600] ( ) Switch, Rocker, Dpdt, On--Off--Mom ( ) Switch, Rocker, Dpdt, Mom--Off--Mom ( ) Switch, Rocker, Dpdt On -- Off -- On 600D (9-0) -3

30 STANDARD PARTS Fig. 3 - Side Instrument Panel Group D (9-0)

31 STANDARD PARTS Fig. 3 - Side Instrument Panel Group , NA Ref. Tennant Part No. Machine Serial Number Description Qty. 984 ( ) Panel Assy, Instrument w/label 3833 ( ) Panel, Side, W/ Label, [600] ( ) Bellows Assy, Valve ( ) Insulation, Acoustic 4 96 ( ) Insulation, Acoustic 96 ( ) Insulation, Acoustic ( ) Insulation, Acoustic ( ) Insulation, Acoustic ( ) Insulation, Acoustic ( ) Insulation, Acoustic ( ) Clamp--Cable,.00Dia..6Wth 9647 ( ) Seal, Rubber 034 ( ) Plugbtn.38H Blacknyl (LPG only) 3 03 ( ) Plug, Plastic,.00 D ( ) Clip, Pine--tree.36h Plastic ( ) Switch, Pushmom, Spst00A V o ( ) Panel, Valve Handle, W/ Label, [600] ( ) Seal, Handle, Valve ( ) Screw, Hex, M04 X 0.7 X 0, Fmg 8 600D (9-0) -

32 STANDARD PARTS Fig. 4 - Circuit Breaker and Relay Group D (9-0)

33 STANDARD PARTS Fig. 4 - Circuit Breaker and Relay Group , D Ref. Tennant Part No. Machine Serial Number Description Qty. 686 ( ) Relay, Shrouded, Vdc ( ) Breaker--Circuit,. Resetbl ( ) Breaker--Circuit, Resetbl ( ) Plugbtn.6H Blacknyl 3 77 ( ) Boot--Circuit Breaker ( ) Plate, Circuit Breaker ( ) Plate--Cover ( ) Button, Plug, 0.0H [Black Nyl] ( ) Clip, [Pine--Tree],.36h, Plstc ( ) Relay, vdc, 40a, Spdt, [Potter] ( ) Circuitbreaker,.0a ( ) Button, Plug, 0.44h [Black Nyl] ( ) Plate, Access ( ) Timer 0694 ( ) Screw, Hex, M06 X.0 X 6, ( ) Nut, Hex, Lock, M06 X.0, Nl ( ) Washer, Flt,. Std ( Module ( Circuitbreaker, 40.0a 0 84 ( ) Screw, Hex, M0 X 0.8 X 6, Fmg 3 600D (9-0) -7

34 STANDARD PARTS Fig. - Engine and Governor Group D (9-0)

35 STANDARD PARTS Fig. - Engine and Governor Group , D Ref. Tennant Part No. Machine Serial Number Description Qty. 846 ( ) Engine, Diesel Kubota E Series (See Engine Breakdown) 9884 ( ) Ftg--Metric E90 Omm/Jm ( ) Hose--Hyd Low Jf/Jf ( ) Ftg--Hyd Plg Jm 4976 ( ) Ftg--Brs E4 Pm0/Pf ( ) Switch, Pressure, Oil ( ) Send Unit, Temperature ( ) Switch, Temperature, Water ( ) Bracket Wldt, Mtg, Actuator o ( ) Throttle Assy, Block, Die ( ) Bearing, Bronze 398 ( ) Boot, Rubber 836 ( ) Rod, Throttle Control, Diesel ( ) Actuator, Governor ( ) Lever, Governor Actuator 344 ( ) Stud, L ( ) Balljoint ( ) Bracket, Drain Hose Clamp ( ) Clip, Keeper, Open ( ) Actuator, Govnr, Dsl ( ) Adaptor, Actuator, Govnr, Eng, Dsl 7388 ( ) Screw, Soc, M06 X.0 X 6, ( ) Gasket, Throttle 600D (9-0) -9

36 STANDARD PARTS Fig. 6 - Engine Mount Group D (9-0)

37 STANDARD PARTS Fig. 6 - Engine Mount Group D Ref. Tennant Part No. Machine Serial Number Description Qty. 837 ( ) Adaptor, Flywheel Hsg, Kubota 9 ( ) Coupling Assy, Flywheel ( ) Dowel,Cyl.Block To Flywhl.Hsg ( ) Housing, Flywheel, Rework 7773 ( ) Wire Assy--Elect.,Ground ( ) Starter, Die (See Engine Breakdown) 7 83 ( ) Bracket Wldt, Mtg, Engine 8 77 ( ) Bracket Wldt,Mtg,Eng, Rear, Rh ( ) Bracket Wldt,Mtg,Eng,Rear, Lh 0 76 ( ) Dampner, Engine ( ) Washer, Flat ( ) Magnet Assy, Pick--Up ( ) Clip, Keeper, Open ( ) Solenoid Starter, V ( ) Scr--Hxfmgm 6x.0 6 Pltd 600D (3-00) -3

38 STANDARD PARTS Fig. 7 - Air Cleaner Group D (9-0)

39 STANDARD PARTS Fig. 7 - Air Cleaner Group D Ref. Tennant Part No. Machine Serial Number Description Qty. o 838 ( ) Air Cleaner 80 ( ) Element, Air Filter ( ) Clamp Assembly Dn ( ) Cup Assembly Dn 076 ( ) Nut, Wing Special ( ) Clamp,Mounting,Cyclopac Aircl ( ) Hose, Molded, Air Intake ( ) Clamp--Wormdrive,.8--.7D ( ) Indicator,Service,Air Filter ( ) Bracket, Mtg, Air Cleaner 8346 ( ) Tube -- Carb. Air Intake 98 ( ) Tube, Inlet, A Clnr ( ) Clip, Keeper, Open 4 8 ( ) Element, Fltr, Air 600D (9-0) -33

40 STANDARD PARTS Fig. 8 - Alternator and Engine Fan Group D Ref. Tennant Part No. Machine Serial Number Description Qty. 873 ( ) Wire--Ground, Alternator 3069 ( ) Spacer, Fan ( ) Fan, Pusher ( ) Scr--Soc M 6X.0 0 Nylonloc 4 8 ( ) Bracket, Alternator ( ) Sleeve,.438B.00D.49 Sml o ( ) Alternator, 0A/V Mando 693 ( ) Regulator Assy Md 8604 ( ) Bearing--Ball,.669B.7D 0.47W 69 ( ) Cplt Brush Kit Md 63 ( ) Rectifier Assy Md 7060 ( ) Altrntr Pulley Md ( ) Spacer,Idler Mount 9 86 ( ) Arm, Alternator ( ) Belt, V Hc4 X D (6-99)

41 Fig. 9 - Muffler Group ( ) 8 9 STANDARD PARTS D, NA Ref. Tennant Part No. Machine Serial Number Description Qty. 8 ( ) Muffler, Exhaust 40 ( ) Clamp--Muffler,For.6 Od Tube ( ) Repl. Kit, Bracket ( ) Isolator--Vibration, lb. Rating 3003 ( ) Washer--Flt.3 Fender Pltd ( ) Pipe, Exhaust, Die ( ) Pipe, Exhaust, Die ( ) Angle, Muffler Hanger ( ) Screw, Hex, M ( ) Nut, Hex, M ( ) Strap, Muffler Hanger 3977 ( ) Screw, Hex, M8 600D (9-0) -3

42 STANDARD PARTS Fig. 0 - Muffler Group ( ) D (9-0)

43 STANDARD PARTS Fig. 0 - Muffler Group ( ) D, NA Ref. Tennant Part No. Machine Serial Number Description Qty. 8 ( ) Muffler, Exhaust 40 ( ) Clamp--Muffler,For.6 Od Tube ( ) Tube Wldt, Exhaust,.6d W/ Flex ( ) Pipe, Exhaust, Die ( ) Channel, Mtg, Isolator, Muffler ( ) Channel, Mtg, Muffler, [600 Dsl] ( ) Isolator--Vibration, lb. Rating ( ) Screw, Hex, M08 X. X 3, ( ) Screw, Hex, M08 X. X 30, ( ) Nut, Hex, M ( ) Strap, Muffler Hanger 3977 ( ) Screw, Hex, M ( ) Washer, Flt,.3 Sae ( ) Washer, Flat,.3 Fender 600D (9-0) -37

44 STANDARD PARTS Fig. - Fuel Tank Group D ( -0)

45 STANDARD PARTS Fig. - Fuel Tank Group D, NA Ref. Tennant Part No. Machine Serial Number Description Qty. ( ) Tray, Gas o 79 ( ) Tank, Fuel, 9.4 Gal ( ) Cap, Fuel o ( ) Sending Unit 43 ( ) Gasket ( ) Ftg--Plug Npt 0Pm Sq Hd ( ) Ftg--Brs E90 Bm0/Pm ( ) Hose, Fuel Line.3 Idx ( ) Hose, Fuelline, 0.0L 0 79 ( ) Fuelline ( ) Hose, Rbr.88 I.D. X 9.0 Lg ( ) Clamp--Wormdrive, D ( ) Strap Weldmt, Gas Tank 4 -- ( ) Ftg--Brs E90 If0/Pm0 793 ( ) Fuelline ( ) Ftg--Brs E90 If03/Pm0 o ( ) Fitting Assy, Fuel ( ) Seal, O--Ring.064X ( ) Tube Assy,.0 D 04JF/04JF ( ) Ftg--Hyd E90 Pm04/Jm04 o 80 ( ) Filter, Fueldiesel 844 ( ) Filter, Fuel, Element 749 ( ) Bracket, Mounting, Filter ( ) Clamp--Cable, 0.Dia 0.6Wth 4 -- ( ) Fitting, Brass E ( ) Clamp--Cable,.69Dia. 6Wth 6 90 ( ) Pump, Fuel 600D (3-00) -39

46 STANDARD PARTS Fig. - Radiator Group D ( -98)

47 STANDARD PARTS Fig. - Radiator Group D, NA Ref. Tennant Part No. Machine Serial Number Description Qty. ( ) Radiator ( ) Draincock,End.Block 3 37 ( ) Cap, Radiator 4 87 ( ) Hose, Radiator, Upper, Die 88 ( ) Hose, Radiator, Lower, Die ( ) Clamp--Wormdrive, D 7 3 ( ) Clamp--Wormdrive, D ( ) Isolator--Vibration,60 Lb.Ratng 9 9 ( ) Plate, Filler ( ) Spacer ( ) Grommet,Rbr,.0Id,For.9Matl 7439 ( ) Guard, Fan, W/Label, Die ( ) Bracket, Radiator Mount 4 90 ( ) Channel, Mtg, Radiator 7440 ( ) Plate, Filler, Diesel 600D (6-99) -4

48 STANDARD PARTS Fig. 3 - Battery Group To Bell Housing To Starter D ( -0)

49 STANDARD PARTS Fig. 3 - Battery Group D Ref. Tennant Part No. Machine Serial Number Description Qty. 043 ( ) Battery, V, Cc Amps:600 Wet o 609 ( ) Wire Assy, 66.0 Lg, Ga, Pos ( ) Boot, Batt. Term. -- Ga Red ( ) Clamp--Cable,.69Dia..6Wth 4966 ( ) Tie, Cable.7D Max 7.0Lg ( ) Strap,Rubber Tie--Down o ( ) Wire Assy, 4.0 Lg, Ga, Neg ( ) Boot, Batt. Term. -- Ga Black 600D (6-99) -43

50 STANDARD PARTS Fig. 4 - Rear Drive Wheel Group D ( -98)

51 STANDARD PARTS Fig. 4 - Rear Drive Wheel Group , NA Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Housing, Sppt, Wheel 339 ( ) Bearing--Cone,.38Bore 0.7Wth ( ) Ftg, Grease.--8Th Strt.63L ( ) Bearing--Cup,.6Dia 0.Wth 40 ( ) Washer, Thrust ( ) Pin, Wheel Support, Rear 7 40 ( ) Nut--Hxslot.--8 Pltd ( ) Scr Soc M6--.0x ( ) Clamp--Cable,.0Dia.00Wth Ss ( ) Nut--Wheel Angle 884 ( ) Plate -- Hose Support 360 ( ) Cylinder--Hyd (See Breakdowns) ( ) Ftg--Hyd E90 Jm06/Om ( ) Balljoint, Rod End ( ) Balljoint, Rod End ( ) Motor--Hyd Gear (See Breakdowns) (004-- ) Motor--Hyd Gear (See Breakdowns) ( ) Ftg--Hyd Str Jm0/Om ( ) Ftg--Hyd E90 Jm04/Om04 o ( ) Hub & Stud Assy 0 36 ( ) Stud, Wheel.0--0 x.0 7 ( ) Bracket, Drive Motor 3743 ( ) Scr--Hex.7--0x3.0 Pltd ( ) Tube,.D 0.7B 0.8L Stl ( ) Washer,.6B 3.D.6 Felt ( ) Seal, Rear Drive Grease Cavity 600D (3-00) -4

52 STANDARD PARTS 7 Fig. - Rear Wheel Assembly D (3-99)

53 STANDARD PARTS Fig. - Rear Wheel Assembly IC, NA Ref. Tennant Part No. Machine Serial Number Description Qty. o 7087 ( ) Tire & Rim Assy,.70/.00R ( ) Rim Assembly o 389 ( ) Tire, Tube and Flap Assembly ( ) Tube, Inner --.00R--8, Js Valve ( ) Flap, Tube 4786 ( ) Cap, Valve Stem ( ) Nut, Hxlocnyln M0x ( ) Screw--Hx M0x. Pltd 600D (6-99) -47

54 STANDARD PARTS Fig. 6 - Front Wheel and Brakes Group D (9-0)

55 STANDARD PARTS Fig. 6 - Front Wheel and Brakes Group IC, NA, CE Ref. Tennant Part No. Machine Serial Number Description Qty. o 477 ( ) Brake Assy 66 ( ) Brake Shoes o 663 ( ) Brake Repair Kit 706 ( ) Chrome Pltd Cam Shft 708 ( ) Return Spring--Brakes o 4437 ( ) Wheel Assy ( ) Tire,8XX. Solid ( ) Bearing--Cup,.6Dia 0.Wth 339 ( ) Bearing--Cone,.38Bore 0.7Wth ( ) Nut--Hxslot Pltd ( ) Cap, Hub ( ) Clevis, Adjustable ( ) Clip, Cable ( ) Pin Clevis.37 Dia X.3 Lg 3900 ( ) Pin, Cotter,.094 X ( ) Pulley, Cable,.D, Nyl ( ) Cable, Brake, Service ( ) Pin,Clevis,0.37 Dia.X.00 Lg 4400 ( ) Angle, Cable Keeper ( ) Spacer, Pulley ( ) Washer--flt.00 Pltd ( ) Clevis, Adj, 0.38pin, ( ) Clevis Wldt, Adj,.0pin , Pl ( ) Nut, Hex, Std, M X ( ) Pin, Cotter,. X ( ) Pin, Clevis, 0.0 D X.l ( ) Nut, Hex, Jam, ( ) Kit, Replmt, Connector, Cable, Brake 600D (9-0) -49

56 STANDARD PARTS Fig. 7 - Brake Lever and Pedal Group D ( -98)

57 STANDARD PARTS Fig. 7 - Brake Lever and Pedal Group NA, JP Ref. Tennant Part No. Machine Serial Number Description Qty. o 73 ( ) Shaft Wldt, Brake w/pad 09 ( ) Pad ( ) Brg, Brake ( ) Ring--Retain, Ex, 0.98OD, E--Ring 4607 ( ) Spring, Torsion ( ) Pad, Rubber 7 4 ( ) Lever, Brake 8 6 ( ) Sleeve,.344B.0D.8 Cr.Anc ( ) Cable, Parking Brake ( ) Pin Clevis.37 Dia X.3 Lg ( ) Pulley, Cable,.D, Nyl 4400 ( ) Angle, Cable Keeper ( ) Spacer, Pulley ( ) Scr--Hexss M6 x ( ) Nut--Hxlocnyln M6 x.0 Regss 4 600D (9-0) -

58 STANDARD PARTS Fig. 8 - Directional Pedal Group D ( -98)

59 STANDARD PARTS Fig. 8 - Directional Pedal Group Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Rod--End M0X. W/Stud 4996 ( ) Rod, Adjusting 3 63 ( ) Scr--Shld.3Dx.00L ( ) Bracket Sppt, Control Rod ( ) Bearing, Flange.6 Bore ( ) Pin,Clevis,0.0 Dia.X 3.7 Lg ( ) Rod Weldt, Drive Linkage ( ) Shock Absorber ( ) Bracket, Speed Limiter 0 83 ( ) Pin,Clevis,0.37 Dia.X. Lg 0686 ( ) Rod--End M0X. W/Stud 3740 ( ) Rod, Speed Limiter, Adjusting, Rh o 3 79 ( ) Pedal, Propel w/pad ( ) Pad, Tread 7430 ( ) Pad, Tread ( ) Bracket, Retainer ( ) Nut--Hxlocnyln.--0 Thin Pltd 600D (6-99) -3

60 STANDARD PARTS Fig. 9 - Hydraulic Pump Linkage Group D ( -98)

61 STANDARD PARTS Fig. 9 - Hydraulic Pump Linkage Group IC Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Rod--End M0X. W/Stud 40 ( ) Rod, Adjusting ( ) Scr--Shld.00Dx.L ( ) Washer--Wavy Spring,#Ww--38--& ( ) Bracket Assy, Isolator ( ) Arm, Control, Pintle ( ) Arm 8 40 ( ) Bumper, Threaded ( ) Sleeve, Bearing 0 84 ( ) Sprng,Tens,0.7Odx.Wire 3.4L ( ) Bolt--Eye,.--0Th.B.4L 3947 ( ) Cam 3 46 ( ) Cam ( ) Bracket, Propel 0977 ( ) Nut--Hx Stdss M0x. Left ( ) Nut--Hxlocnyln Thin Pltd ( ) Scr--Hex.3--4x0.6 Pltd 600D (6-99) -

62 STANDARD PARTS Fig Hopper Group (Metal Hopper) D (6-99)

63 STANDARD PARTS Fig Hopper Group (Metal Hopper) Not 600 CE, JP Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Hopper Wldt 9680 ( ) Skirt, Lip ( ) Skirt, Lip ( ) Strap, Main Lip 0900 ( ) Screw, Hex, M08--. X, Ss ( ) Washer, Flat,.3 Ss ( ) Nut, Hex, Lock, M08--.,Nl,Ss 8 0 ( ) Filter, Dust, Panel, Perma Filter ( ) Tube ( ) Nut, Hex, Lock, M06--.0, Nl,Ss ( ) Screw, Hex, M X 40, Ss 803 ( ) Seal 3 90 ( ) Seal ( ) Strap ( ) Screw, Hex, M X, Ss ( ) Washer, Flat,. Ss ( ) Angle ( ) Screw, Hex, M08--. X 0, Ss ( ) Nut, Hex, Flange, M ( ) Plate 96 ( ) Seal 678 ( ) Screw, Hex, M X 6, Ss ( ) Clamp, Cable ( ) Washer,.6b 3.03 D.hr ( ) Screw, Hex, M--.7 X 40, ( ) Washer, Belleville, ( ) Insulation, Acoustic, Hopper 8 98 ( ) Insulation, Acoustic, Hopper ( ) Seal, Foam Rubber 600D (9-0) -7

64 STANDARD PARTS Fig. 3 - Hopper Group (Plastic Hopper) D ( -0)

65 STANDARD PARTS Fig. 3 - Hopper Group (Plastic Hopper) Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Hopper, Molded ( ) Plate, Support, Hopper ( ) Screw, Hex, M08--. X 6, Ss ( ) Nut, Hex, Lock, M08--.,Nl,Ss ( ) Washer, Flat,.3 Ss ( ) Washer,.34B.0D ( ) Skirt, Lip ( ) Skirt, Lip ( ) Strap, Main Lip ( ) Bolt, Carriage M8x.Pltd 4089 ( ) Skirt, Side, SBDC, Lh ( ) Plate, Retainer ( ) Plate, Retainer 4 39 ( ) Screw, Hex, M X 6, Ss ( ) Washer, Flat,. Ss ( ) Panel Wldt, Perma Filter ( ) Screw, Hex, M X 40, Ss ( ) Plate 9 96 ( ) Seal, Vac Wand ( ) Clamp, Cable 0.D 0.6W Stl ( ) Wiper Door ( ) Strap, Wiper, Door ( ) Screw, Hex, M08--. X, Ss ( ) Seal, Pocket, Hopper ( ) Plate, Retainer ( ) Screw, Hex, M X 0, Ss ( ) Nut, Hex, Lock, M06--.0, Nl,Ss 600D (9-0) -9

66 STANDARD PARTS Fig. 3 - Hopper Dump Door Group (Metal Hopper) D (6-99)

67 STANDARD PARTS Fig. 3 - Hopper Dump Door Group (Metal Hopper) Not 600 CE, JP Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Door Wldt, Dump 864 ( ) Cord, Sponge ( ) Seal ( ) Strap ( ) Screw, Hex, M X, Ss ( ) Washer, Flat,. Ss ( ) Nut, Hex, Lock, M06--.0, Nl,Ss ( ) Seal ( ) Strap ( ) Rod 89 ( ) Spring, Tension ( ) Bolt, Eye,.--0x.x.6 Eye ( ) Skirt ( ) Plate, Retainer 404 ( ) Plate, Retainer 6 49 ( ) Screw, Hex, Fmg, M X D (6-99) -6

68 STANDARD PARTS Fig Hopper Cylinder and Dust Door Group (Metal Hopper) D (6-99)

69 STANDARD PARTS Fig Hopper Cylinder and Dust Door Group (Metal Hopper) NA Ref. Tennant Part No. Machine Serial Number Description Qty. 37 ( ) Pin,Roll,.38Odx.00L,.37/ ( ) Door, Dust 3 39 ( ) Rod Wldt ( ) Collar, Locking ( ) Bearing--Flange, Hole.6Bore ( ) Pin,Roll,.8Odx.L,.87/ ( ) Bar, Link ( ) Switch Assy, Roller ( ) Bearing--Self Align.0 Bore ( ) oke, Pivot, Machining 893 ( ) Bar, Link 4096 ( ) Cylinder--Hyd,.0X 4.0Da00Psi 3 86 ( ) Ftg--Hyd Str Jm04/Om ( ) Ftg--Hyd E90 Jm04/Om ( ) Sleeve--Nyln #0 0.0L ( ) Ftg--Hyd Tee Jm04Jmbjm ( ) Ftg--Hyd E4 Jm04/Jf ( ) Ring,Retain,Ex,0.0Od,Selflock 9 ( ) Pin,Clevis,0.0 Dia.X. Lg ( ) Pin,Clevis,0.0 Dia.X. Lg 34 ( ) Pin,Clevis,0.0 Dia.X.00 Lg 94 ( ) Hub, Pivot ( ) Pin, Cotter ( ) Ftg, Grease.--8Th Strt.63L ( ) Screw, Hex, M X, Ss ( ) Nut, Hex, Lock, M06--.0, Nl,Ss ( ) Screw, Hex, M X 6, Ss ( ) Washer, Flat, #0 Ss ( ) Nut, Hex, Lock, M0--0.8, Nl,Ss ( ) Screw, Hex, M08--. X 40, Ss 4 600D (3-00) -63

70 STANDARD PARTS Fig Hopper Cylinder and Dump Door Group (Plastic Hopper) D (6-99)

71 STANDARD PARTS Fig Hopper Cylinder and Dump Door Group (Plastic Hopper) Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Door Wldt, Dump ( ) Seal, Door, Dump ( ) Plate, Retainer, Dump Dooor ( ) Bolt, Carriage M6x.0 Pltd ( ) Washer, Flat,. Ss ( ) Nut, Hex, Lock, M06--.0, Nl,Ss ( ) Seal, Door, Dump, Side ( ) Srap, Door, Dump, Side ( ) Screw, Hex, M X, Ss ( ) Bracket, Switch, Door ( ) Bracket, Cylinder 0900 ( ) Screw, Hex, M08--. X, Ss ( ) Washer, Flat,.3 Ss ( ) Nut, Hex, Lock, M08--.,Nl,Ss A ( ) Pin, Clevis ( ) Washer, Flat,.0 Sae ( ) Seal, Shaft 8 94 ( ) Hub, Pivot ( ) Bearing, Align. Self.B ( ) Fitting, Grease, Str 04 ( ) Screw--Hexssm 8x ( ) Screw, Hex, M08--. X 6, Ss ( ) Washer,.344B.D.Cr ( ) Cylinder, Hyd.0B 4.0S ( ) Tube, 0.7D 0.B 0.8L Stl ( ) Switch Assembly, Roller--No ( ) Nut, Hex, Lock, M0--0.8, Nl,Ss 8 86 ( ) Fitting, Hyd, Str ( ) Fitting, Hyd, Elbow ( ) Sleeve, 4 Lg ( ) Washer,.Ob.0D.9L ( ) Washer, Flat 0 Ss ( ) Screw, Hex, M X 6, Ss 600D (6-99) -6

72 STANDARD PARTS Fig. 3 - Hopper Hood and Bumper Group (Metal Hopper) D (6-99)

73 STANDARD PARTS Fig. 3 - Hopper Hood and Bumper Group (Metal Hopper) IC, NA Ref. Tennant Part No. Machine Serial Number Description Qty. o 7430 ( ) Cover, Hopper 944 ( ) Strip, Mtg, Hinge ( ) Strip, Mtg, Gusset ( ) Bracket, Gusset, Corner, Lh 9739 ( ) Bracket, Gusset, Corner, Rh ( ) Label, Tennant Logo Blue ( ) Bracket Wldt, Hpr Cvr Sprng ( ) Plate Wldt, Sprngbrkt Backing ( ) Spring--Gas 0Lb 7. Stroke ( ) Clip Safety ( ) Stud, Ball, Gas Spring ( ) Grommet,Rbr,.06Id,For.9Matl ( ) Hinge, Coverhopper ( ) Housing, Headlight 84 ( ) Headlight, V.Rect ( ) Bumper Wldt, Front ( ) Skirt,Bumperstop ( ) Seal, Bulb ( ) Molding, Trim --4Ga ( ) Duct, Vinyl (Cut in ) 743 ( ) Cable, Cover, Safety 7433 ( ) Spring, Tension ( ) Rivet, Plastic.3D x ( ) Rivet, Plastic.8D x ( ) Bracket, Cable Spring ( ) Screw, Hex, M X 0, Ss ( ) Washer, Flat,. Ss ( ) Nut, Hex, Lock, M06--.0, Nl,Ss ( ) Nut, Hex, Lock,.3--8, Nl 4 600D (3-00) -67

74 STANDARD PARTS Fig Hopper Hood Group (Plastic Hopper) D ( -0)

75 STANDARD PARTS Fig Hopper Hood Group (Plastic Hopper) , NA, CE Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Hopper Cover Assembly 3799 ( ) Cover, Inner Molded ( ) Bracket, Hood, Rh ( ) Bracket, Hood, Lh 4986 ( ) Screw, Hex, M08--. X 6, Ss ( ) Washer, Flat,.3 Hard ( ) Stud, Ball, Gas Spring ( ) Clip, Safety Gas Spring ( ) Hinge, Hopper Cover ( ) Screw, Hex, M X 6, Ss ( ) Washer, Flat,. Hard 700 ( ) Label, Tennant Logo, Oval ( ) Molding, Trim --4Ga ( ) Spring--Gas 0Lb 7. Stroke ( ) Nut, Hex, Lock, M06--.0, Nl ( ) Washer, Flat,.3 Ss ( ) Cover, Hopper, D ( -0) -69

76 STANDARD PARTS Fig Hopper Bumper Group (Plastic Hopper) D (6-99)