MODEL 318C BOEING TRAILER PARTS LIST

Transcription

1 MODEL 318C BOEING TRAILER PARTS LIST 1900 NORTH STREET MARYSVILLE, KANSAS (785) F /05

2

3 ILLUSTRATED PARTS LIST c boeing gen assy FIG URE 1-1 GENERAL ASSEMBLY GENERAL ASSEMBLY ITEM PAGE NO. DESCRIPTION QTY FIFTH WHEEL AS SEM BLY HYDRAULIC ASSEMBLIES ELECTRICAL ASSEMBLIES RE MOTE CON TROL (NOT SHOWN) UN DER CAR RIAGE AND SUS PEN SION - AIR RIDE ; 1-38 AIR BRAKE SYS TEM AXLE AND BRAKE AS SEM BLY HY DRAU LIC DOCK LEV ELER CYLINDER HUB AND DRUM AS SEM BLY MAIN AIR SYS TEM WINCH ASSEMBLIES DECAL INSTALLATION DOOR AND COVER ASSEMBLY EN GINE DRIVE AND BRACKET AS SEM BLY BULKHEAD ASSEMBLY SPARE TIRE CAR RIER ASSEMBLY AIR DUMP VALVE IN STAL LA TION (NOT SHOWN) DUAL STROBE LIGHT IN STAL LA TION (NOT SHOWN) FLAG AND BAN NER KIT (NOT SHOWN) ROLLER ASSEMBLY, SLOPE UP PER DECK STAND AS SEM BLY 10" D-RING INSTALLATION 1 1-1

4 m FIG URE 1-2 FIFTH WHEEL HITCH AS SEM BLY 1-2

5 FIFTH WHEEL HITCH AS SEM BLY ITEM PART NO. DESCRIPTION QTY HITCH INSTALLATION 18 KP HITCH PLATE FIFTH WHEEL HITCH SPRING PIN SLOT TED PIN FIFTH WHEEL HINGE TUBE WELD MENT IN NER FIFTH WHEEL TUBE IN NER HINGE FIFTH WHEEL SCREW HEX HEAD CAP 3/4-10 X 2-1/2 GR NUT HEX LOCK 3/4-10 GRB FIT TING GREASE 1/4-28 SHORT 6 1-3

6 A m134894p1 FIGURE 1-3 HYDRAULIC CONTROLS INSTALLATION (1 OF 2)

7 A m134894p2 14 FIG URE 1-4 HY DRAU LIC CON TROLS IN STAL LA TION (2 OF 2) 1-5

8 HY DRAU LIC CON TROLS INSTALLATION ITEM PART NO. DESCRIPTION QTY HY DRAU LIC CON TROLS INSTALLATION FITTING, BULKHEAD UNION SS WRENCH, COM BI NA TION 1-1/2 (NOT SHOWN) PARK STAND WELD MENT HYD LH LEG PARK STAND WELD MENT HYD RH LEG HOSE AS SEM BLY 3/4 X COU PLER FLAT FACE MALE COU PLER FLAT FACE FE MALE ADAPTER BULK HEAD HOSE ASSEMBLY HOSE AS SEM BLY 3/8 X STAND WELDMENT, HYD LEG FOOT PAD WELDMENT, U/C PIN, STAND HYD LEG ENGINE PACK AGE, 27 HP REF CHOCKS, CHAINED ASSEMBLY ANCHOR, STORAGE SUPPORT STAND HOSE AS SEM BLY 3/8 X VALVE, COUNTERBALANCE ADAPTER PIN, FOOT PAD HOSE AS SEM BLY 3/4 X HOSE AS SEM BLY 3/4 X DE CAL, 5TH WHEEL/ CURB - STREET D/L VALVE AS SEM BLY, 3 SPOOL REMOTE VALVE AS SEM BLY, 3 SPOOL MO TOR W/ T/A WINCH, 30K DP AIR RE LEASE, AIR TENSION REF DE CAL, AXLE/WINCH/HYD LAND ING GEAR CYL IN DER HY DRAU LIC 3000 PSI (SEE PAGE 1-14) HOSE HY DRAU LIC 1/2 X HOSE AS SEM BLY 1/2 X HOSE AS SEM BLY 1/2 X HOSE AS SEM BLY 1/2 X HOSE AS SEM BLY 1/2 X HOSE AS SEM BLY 1/2 X HOSE AS SEM BLY 1/2 X HOSE AS SEM BLY 1/2 X HOSE AS SEM BLY 1/2 X HOSE AS SEM BLY 3/4 X HOSE AS SEM BLY 3/4 X HOSE AS SEM BLY 3/4 X NUT FLANGE LOCK 3/ NUT HEX LOCK 5/16-18 GRB NUT HEX LOCK 1/2-13 GRB NUT HEX LOCK 5/8-11 GRB NUT HEX LOCK 3/4-10 GRB NUT HEX 1/2-13 GRB PIN COT TER 3/16 X 2-1/ PIN COT TER 1/4 X 2-1/ REGU LA TOR FLOW 1/2-6 GPM 1 1-6

9 HY DRAU LIC CON TROLS INSTALLATION ITEM PART NO. DESCRIPTION QTY ROLL PIN, SLOT TED 3/8 X SCREW HEX HEAD CAP 5/16-18 X 2-1/2 GR SCREW HEX HEAD CAP 3/8-16 X 1 GR SCREW HEX HEAD CAP 3/8-16 X 1-1/2 GR SCREW, HEX HEAD CAP 5/8-11 X 1-1/2 GR SCREW, HEX HEAD CAP 5/8-11 X 2 GR SCREW HEX HEAD CAP 3/4-10 X 2-1/4 GR WASHER FLAT 5/ WASHER FLAT 3/8W WASHER FLAT 1/2W WASHER LOCKING INTERNAL TOOTH V0208 POWER BE YOND RE MOTE S ELBOW, S ADAPTER S UNION S ADAPTER TEE S ADAPTER TEE S ADAPTER TEE S ADAPTER TEE S ADAPTER 90 BULK HEAD S ADAPTER S ADAPTER S ADAPTER 90 SWIVEL U-BOLT, SUPPORT BRACKET WELD MENT CYL IN DER TRUNNION RUBBER BUMPER CYLINDER CYLINDER ASSEMBLY (SEE PAGE 1-9) (NOT SHOWN) MOUNT FLOW REGU LA TOR PIN CYL IN DER BUTT END PIN CYL IN DER ROD END PIN UN DER CAR RIAGE CYL IN DER CYL IN DER AS SEM BLY, 4 X 42 (INCL ITEMS ) SUPPORT, E-CHAIN REF TUBE AS SEM BLY, 3/4 PRES SURE FRONT TUBE AS SEM BLY, 3/4 RE TURN FRONT WASHER STEP SL LOCK HITCH PIN 2 90 E10317 KLIK PIN 1/ PARK STAND WELDMENT RH S ADAPTER, TEE S REDUCER S ADAPTER S ADAPTER GAUGE PSI PARK STAND WELDMENT LH CHAIN, MACH STR LINK #4 X CYL IN DER, HY DRAU LIC 4 X 42 (SEE PAGE 1-10) TUBE, CYL IN DER 10" STOP NUT, WING 1/

10 m FIG URE 1-5 HY DRAU LIC CON TROLS IN STAL LA TION 1-8

11 HY DRAU LIC SYS TEM - LOW LOAD AN GLE ITEM PART NO. DESCRIPTION QTY CYLINDER ASSEMBLY (INCLUDES ITEMS 1-22) CYLINDER, HYDRAULIC (SEE PAGE 1-10) CYL IN DER, HY DRAU LIC 4 X 126 (SEE PAGE 1-11) CYL IN DER TRUNNION AS SEM BLY NYLATRON BEARING PIN CYL IN DER BUTT END PIN COT TER BUSHING SCREW HEX HEAD CAP 5/8-11 X 8 GR WASHER FLAT 5/8W NUT HEX LOCK 5/8-11 GRB FIT TING, GREASE 1/ CAP, PLAS TIC TA PERED (NOT SHOWN) S ADAPTER TEE HOSE ASSEMBLY S ADAPTER HOSE ASSEMBLY S ADAPTER TEE HOSE ASSEMBLY HOSE ASSEMBLY S ADAPTER TIE STRAP PLAS TIC (NOT SHOWN) HOSE AS SEM BLY 1/2 X 16 REF HOSE AS SEM BLY 1/2 X 184 REF HOSE AS SEM BLY 1/2 X 238 REF NUT, HEX LOCK 1/2-13 GRB REF NUT, HEX LOCK 3/4-10 GRB REF NUT, HEX 1/2-13 GRB REF PIN, COT TER, 3/16 X 2-1/4 REF SCREW, HEX HEAD CAP 3/4-10 X 2-1/4 GR5 REF WASHER, FLAT 3/8W REF U-BOLT, CYLINDER SUPPORT REF BRACKET WELDMENT, CYL IN DER TRUNNION REF RUBBER BUMPER REF PIN, UN DER CAR RIAGE CYL IN DER REF WASHER, STEP REF 1-9

12 FIG URE 1-6 CYL IN DER 4" X 42" CYL IN DER 4" X 42" ITEM PART NO. DESCRIPTION QTY CYL IN DER HY DRAU LIC 4 X 42 (TILT CYL IN DER) 1 * BUTT AND TUBE AS SEM BLY PISTON ROD LOCKNUT (1-1/4-12) PISTON GLAND 1 6 PMCK- AD- 460 PACKING KIT 1 (CON TAINS ALL NEC ES SARY SEALS AND O- RINGS) * PART NOT SOLD SEPA RATELY. RE QUIRES PUR CHASE OF EN TIRE AS SEM BLY. 1-10

13 FIG URE 1-7 CYL IN DER 4" X 126" CYL IN DER 4" X 126" ITEM PART NO. DESCRIPTION QTY CYL IN DER HY DRAU LIC 4 X * BUTT AND TUBE AS SEM BLY PISTON ROD PISTON GLAND SPACER LOCKNUT (1-1/4-12) 1 7 PMCK- AD- 461 PACKING KIT 1 (CON TAINS ALL NEC ES SARY SEALS AND O- RINGS) *PART NOT SOLD SEPA RATELY. RE QUIRES PUR CHASE OF EN TIRE AS SEM BLY. 1-11

14 m FIG URE 1-8 VALVE AS SEM BLY, THREE SPOOL 1-12

15 VALVE AS SEM BLY THREE SPOOL ITEM PART NO. DESCRIPTION QTY VALVE AS SEM BLY 3-SPOOL, TILT, DOCK LEG VALVE AS SEM BLY 3-SPOOL, ACCLEL, WINCH, DOCK LEG MOUNT WELDMENT, CON TROL VALVE FIT TING AIR FITTING AIR FIT TING BRASS PLUG HEX NUT FLANGE LOCK 3/ NUT HEX LOCK W/NY LON # SCREW MACH FLSTR 6-32 X 1-1/ SCREW HEX HEAD CAP 3/8-16 X 2 GR S ADAPTER S ADAPTER ADAPTER AIR CYL IN DER BREATHER PNEU MATIC EX HAUST CAP MODI FIED VALVE SPOOL CYLINDER AIR MOUNT AIR CYL IN DER VALVE SPACER MALE - FE MALE VALVE PNEU 4-WAY, 3-POS (SEE PAGE 1-15) VALVE PNEU MANF- 2 STA TION (NO PARTS BREAK DOWN) VALVE BLANK STA TION COVER VALVE 3-SPL 2500 PSI (SEE PAGE 1-17) (134997) VALVE AS SEM BLY 3 SPOOL MO TOR CEN TER 1 (SEE PAGE 1-17) (134998) 22 68CA- 2-2 CON NEC TOR 9 23 NB TUB ING NY LON FLEX 1/8 AR 1-13

16 HY DRAU LIC CYL IN DER 3-1/2 X 20 ITEM PART NO. DESCRIPTION QTY CYL IN DER 3-1/2" X 20" (PRINCE SAE 33520) PISTON ROD TUBE TIEROD ASSEMBLY BUTT GLAND ASSEMBLY PISTON CLEVIS ASSEMBLY LOCKNUT CLEVIS PIN COTTER PIN PLASTIC PLUG PORT PLUG 1 13 * CROWN SEAL 1 14 * O- RING 1 15 * O- RING 2 16 * BU-WASHER 2 17 * U- CUP 1 18 * WIPER PACK ING KIT (ITEMS 13-18) 1 (CON TAINS ALL NEC ES SARY SEALS AND O- RINGS) *PARTS AVAIL ABLE IN PACK ING KIT ONLY. FIG URE 1-9 HY DRAU LIC CYL IN DER 3-1/2 X

17 Figure 1-10 Pneu matic Valve PNEUMATIC VALVE ITEM PART NO. DESCRIPTION QTY VALVE PNEU MATIC 4- WAY 3 PO SI TIONS SPOOL 1 2 A OPERATOR 1 3 A BODY 1 4 AB CAP XX COIL LA BEL MODEL NUM BER 2 7 A SERV ICE KIT (CON TAINS ALL NEC ES SARY TEE SEALS, O- RINGS, SPRING AND PLUNGER AND GAS KET) 1-15

18 1-16 Figure 1-11 Three Spool Valve

19 THREE SPOOL VALVE ITEM PART NO. DESCRIPTION QTY VALVE 3 SPOOL VALVE AS SEM BLY 3 SPOOL MO TOR CEN TER 1 1V1703 VALVE HAN DLE 3 2 2A CAP SCREW (TIGHTEN TO 7-11 FT - LBS) 9 3 4Z4306 BRACKET HAN DLE 3 4 1A0711 WASHER O- RING SPOOL 6 5 2A SEAL SPOOL 6 6 * SPOOL 4- WAY 3 * SPOOL MO TOR ING 4- WAY E 7 1R0017 RELIEF ASSEMBLY ( PSI) 1 8 * HOUSING VALVE 1 9 1V0081 POP PET LOAD CHECK A0757 SPRING LOAD CHECK V1725 PLUG LOAD CHECK A0709 SPACER END A0291 WASHER STOP A0744 SPRING CENTERING A0292 COL LAR STOP A CAP SCREW (TIGHTEN TO 7-11 FT - LBS) A0294 CAP END A0290 WASHER CENTERING SPRING V0208 ADAPTER AS SEM BLY RE MOTE POWER BE YOND 1 (CONTAINS ALL NECESSARY O-RINGS) 20 2A GROM MET RUB BER (BOT TOM OUT LET) V1701 PIN KIT A PLUG CONVERSION 1 2V0010 SEAL KIT 1 * SOLD AS A MATCHED SET ONLY. 1-17

20 WHITE (GROUND) BLACK (CLRNC) BLUE (+ HOT) BROWN (TAIL) YELLOW (LH TURN) GREEN (RH TURN) RED (BRAKE) TO REMOTE TO LIGHTS E-CHAIN SUPPORT TO ABS m135154p FIG URE 1-12 ELEC TRI CAL SYS TEM W/ RE MOTE (1 OF 3) 1-18

21 POWER AND GROUND CONNECTOR PLUG INTO MAIN HARNESS ON PLUG LABELED REMOTES m135154p2 3 2 FIG URE 1-13 ELEC TRI CAL SYS TEM W/ RE MOTE (2 OF 3) 1-19

22 BRADY NOS. SHOULD BE ON THE WIRE THAT CORRESPONDS TO THE RECEIVER TERMINAL NO. POWER AND GROUND TRL TILT UP GRN 16 TRL TILT DOWN ORG 15 U/C REAR GRN 14 U/C FORWARD ORG 13 LH REAR LIFT UP RED/BLK 12 LH REAR LIFT DOWN WHT/BLK 11 WINCH OUT WHT/BLK 10 WINCH IN RED/BLK 9 RH REAR LIFT UP BLK 8 RH REAR LIFT DOWN RED 7 FRONT PARK STAND UP BLK 6 FRONT PARK STAND DOWN RED 5 POWER BLUE GROUND WHITE m135154p3 FIG URE 1-14 ELEC TRI CAL SYS TEM W/ RE MOTE (3 OF 3) 1-20

23 ELEC TRI CAL SYS TEM W/ RE MOTE ITEM PART NO. DESCRIPTION QTY ELEC TRI CAL SYS TEM INST. RE MOTE (ITEMS 1-25) UNDERCARRIAGE ASSEMBLY (ITEMS 26-39) NUT, HEX FLANGE SPIRALOCK 1/ BAT TERY, 9 VOLT CON TROL, RA DIO RE MOTE 12H (SEE PAGE 1-23) HAR NESS, RE MOTE MOD T/W/A HAR NESS, RE MOTE MOD DOCK LEVEL VALVE AS SEM BLY, 3 SPOOL REF VALVE AS SEM BLY, 3 SPOOL MOTOR REF SCREW, HEX HEAD CAP 1/4-20 X 1 GR WASHER, FLAT 1/4N GROMMET MOUNT HAR NESS ASSY, FRONT MAIN LIGHT LED TURN MARKER YELLOW LIGHT, RED LED 2.5 CL/MKR LIGHT, AM BER LED 2.5 CL/MKR HAR NESS ASSY, BED GROM MET NUT HEX LOCK 1/4-20 GRB NUT HEX LOCK 5/16-18 GRB SCREW HEX HEAD CAP 5/16-18 X 1-1/4 GR WASHER, FLAT 5/16W POLE ELEC TRI CAL FE MALE CONNECTOR HAR NESS TAN ABS LAMP LIGHT ABS LAMP AM BER S-7 RECEPTACLE 7 PIN W- 2-3 RUBBER BOOT LICENSE LAMP GROMMET, LIGHT HARNESS E-CHAIN GROM MET, RECT. C./MKRLAMP LIGHT, RED LED OB LONG STT LIGHT, RED LED CLEAR ANCE HARNESS, BUMPER LIGHT OVAL AM BER STROBE LED TOG GLE SWITCH SEALED SPST ELECT BUTT SPLICE ELECT BUTT SPLICE SCREW, ROUND HEAD MACH X 3/ WASHER, SPLIT LOCK # NUT, HEX #

24 MAIN WIRING HARNESS m FIG URE 1-15 BULK HEAD LIGHT ASSEMBLY BULKHEAD LIGHT AS SEM BLY ITEM PART NO. DESCRIPTION QTY ELECTRICAL INSTALLATION, DUAL BULKHEAD LIGHT HAR NESS LIGHT WORK COUR TESY REC TAN GU LAR QUARTZ HALO GEN LAMP TIE STRAP PLAS TIC (NOT SHOWN) SCREW HEX HEAD CAP 3/8-16 X 1 GR NUT HEX LOCK 3/8-16 GRB HARNESS BULKHEAD LIGHTS HARNESS BULKHEAD LIGHTS 1 8 STP-147 CON NEC TOR BUL LET MALE DE CAL, LIGHT (NOT SHOWN) (SEE PAGE 1-52) GROM MET 9/16" ID GROM MET

25 m FIG URE 1-16 WIRE LESS RA DIO RE MOTE CON TROL WIRE LESS RA DIO RE MOTE CON TROL ITEM PART NO. DESCRIPTION QTY CON TROL (MICROTRONICS #12H-LND-SP1-DF) TRANS MIT TER, RE MOTE - A BAND TRANS MIT TER BOARD - A BAND RE CEIVER, RE MOTE - A BAND 1 4 W AN TENNA CORD 20 FT

26 m133471p1 FIGURE 1-17 UNDERCARRIAGE SUSPENSION AIR RIDE (1 OF 2) 1-24

27 m133471p2 FIG URE 1-18 UN DER CAR RIAGE SUS PEN SION AIR RIDE (2 OF 2) 1-25

28 UN DER CAR RIAGE AS SEM BLY, AIR RIDE ITEM PART NO. DESCRIPTION QTY UNDERCARRIAGE ASSEMBLY AIR RIDE ZERK FIT TING SCREW, HEX HEAD CAP 1-8 X 4-1/2 GR SUSP. ADJ. RLU (SEE PAGE 1-31) AIR CON TROL KIT NE WAY (SEE PAGE 1-29) HARNESS ASSEMBLY E-CHAIN REF CLAMP, HOSE NUT, HEX 2-12 GRB HOSE AS SEM BLY 3/8 X CAM FOL LOWER SUSPENSION WELDMENT AXLE WELDMENT 2512 SPG X 83 2 (FOR AXLE WELD MENT BREAK DOWNS, SEE PAGE 1-35) AXLE WELD MENT 2512 SER X 83 1 (FOR AXLE WELD MENT BREAK DOWNS, SEE PAGE 1-35) BUMPER WELD MENT CYL IN DER, HYD DOCK LEV ELER HD (SEE PAGE 1-37) 2 (SEE PAGE 1-6 FOR FOOT PAD WELDMENT P/N) AIR BRAKE SYSTEM AS SEM BLY ABS 1 (NOT SHOWN) (SEE PAGE 1-33) FITTING, AIR FIT TING AIR UN/TEE FIT TING AIR UN/TEE FIT TING, AIR NUT FLANGE LOCK 3/ NUT, HEX LOCK 1-8 GRB NUT, HEAVY HEX 1-8 GRB NUT HEX 1/4-20 GRB SCREW HEX HEAD CAP 3/4-10 X 1-3/4 GR SCREW HEX HEAD CAP 3/8-16 X 1-1/2 GR SCREW HEX HEAD CAP 3/4-10 X 2-1/2 GR SCREW, HEX HEAD CAP 1-8 X 3-1/4 GR SCREW, HEX HEAD CAP 1-8 X 8 GR SCREW ROUND HEAD SQUARE NECK 1/4-20 X 3/4 GR TIE, STRAP PLAS TIC 18 X 14 (NOT SHOWN) TIE STRAP PLAS TIC (NOT SHOWN) TUB ING NY LON AR TUB ING NY LON 3/8 AR WASHER FLAT 1/ WASHER FLAT 3/8W WASHER FLAT 1/2W WASHER FLAT 1N WASHER SPLIT LOCK # WASHER SPLIT LOCK 1/ WASHER SPLIT LOCK 3/ ZERK FIT TING HOSE CLAMP

29 UN DER CAR RIAGE AS SEM BLY, AIR RIDE ITEM PART NO. DESCRIPTION QTY S ADAPTER, STRAIGHT MUD FLAP SUPPORT E-CHAIN E-CHAIN LINK ASSEMBLY ( ) A/R E-CHAIN CROSSBAR A/R E- CHAIN SIDE PIECE - LH A/R E- CHAIN SIDE PIECE - RH A/R HOLD DOWN UN DER CAR RIAGE CLAMP MUD FLAP TRAY CAT TRACK WASHER 3/4-10 MIL- CARB FL S NIP PLE HEX 1/2PIPE - 1/4PIPE PIN, D/L PIVOT TUBE PIN, D/L RLRS, HD SNAP RING PIN, COT TER 3/16 X 2-1/ RING, RETAINING HD ROLLER, 4" FIBERGLIDE ASSEMBLY

30 1-28 FIG URE 1-19 AIR CON TROL KIT, RLU- 228

31 AIR CON TROL KIT RLU- 228 ITEM PART NO. DESCRIPTION QTY AIR CON TROL KIT NE WAY HEIGHT CON TROL VALVE AIR PRES SURE PRO TEC TION VALVE & FIL TER SRK KIT (ADJ. LINK ASSEMBLY) CAP SCREW 1/4-20 X 3/ LOCK NUT 1/ DECAL (OPERATING) HEIGHT CON TROL VALVE IN STRUC TIONS (NOT SHOWN)

32 1-30 FIG URE 1-20 SUS PEN SION HANGER AS SEM BLY RLU- 228

33 SUS PEN SION HANGER RLU- 228 ITEM PART NO. DE SCRIP TION QTY SUS PEN SION, ADJ. RLU (INCL. ITEMS 1-19) SUS PEN SION, BEAM. RLU-228 (INCL. ITEMS 20-28) FLAT WASHER AIR SPRING AS SEM BLY SHOCK ALIGN BUSH AS SEM BLY (CON SISTS OF:) ROD BOLT ALIGN BLOCK ALIGN BLOCK /4-16 HEX NUT GRB LOCK WASHER, 3/4" HEX NUT, 1/ LOCK WASHER, 1/2" HEX HEAD CAP SCREW 3/4-10 X 3-1/ LOCK NUT, 3/4" /4-10 SQUARE NUT LOCK NUT 1-1/ AN CHOR, RIDE HEIGHT CON TROL VALVE (NOT SHOWN) LIT ERA TURE IN STRUC TIONS (NOT SHOWN) LIT ERA TURE SPEC (NOT SHOWN) LIT ERA TURE FORM 864 (NOT SHOWN) LITERATURE LABEL (NOT SHOWN) LITERATURE LABEL (NOT SHOWN) FAS TENER KIT (INCL. ITEMS 1, 4-11, 13, 15) FLAT WASHER EQUALIZING BEAM ASSEMBLY LH RUB BER BUSH ING (FRONT PIVOT) RUB BER BUSH ING (AXLE CON NEC TION) AXLE ADAPTER AS SEM BLY EQUALIZING BEAM ASSEMBLY RH HEX HEAD CAP SCREW 1-1/8-7 X 8-1/ SAFETY STRAP LOCK NUT 1-1/8-7 4 NOTE: QUAN TI TIES LISTED ARE PER AXLE. 1-31

34 AIR HOSES TO GO THRU E-CHAIN CLOSEST TO MIDDLE OF TRAILER FRONT OF TRAILER m FIG URE 1-21 AIR BRAKE SYS TEM W/ ABS 1-32

35 AIR BRAKE SYS TEM W/ ABS ITEM PART NO. DESCRIPTION QTY AIR BRAKE SYS TEM W/ ABS ABS BRAKE KIT (SEE PAGE 1-38) POWER/DIAGNOSTIC CABLE REF TUBING, NYLON 5/8 AR FITTING, AIR FITTING, AIR FITTING, AIR FIT TING, AIR FIT TING, AIR FIT TING, AIR FIT TING, AIR FIT TING, AIR M/ BRASS TEE HOSE, AIR 3/8 X HOSE, AIR 3/8 X HOSE, AIR 3/8 X HOSE, AIR 3/8 X HOSE, AIR 3/8 X HOSE, ABRA SION SLEEVE X NUT, FLANGE LOCK 3/ NUT, HEX LOCK 3/8-16 GRB NUT, HEX LOCK 1/4-20 GRB PLUG, PIPE 3/ PLUG, PIPE 1/ PLUG, PIPE 3/ SCREW HEX HEAD CAP 1/4-20 X 1 GR SCREW HEX HEAD CAP 3/8-16 X1-3/4 GR TUB ING NY LON 3/8 AR TUB ING NY LON 1/2 AR WASHER FLAT 1/4W WASHER FLAT 3/8W WASHER SPLIT LOCK 1/ BUSHING S ADAPTER S ADAPTER TANK AIR B61 FRAME UN ION D4 AIR TANK DRAIN COCK VALVE RE LAY EMER GENCY STEP BUSH ING

36 1-34 FIG URE 1-22 AXLE AND BRAKE ITEMS (DEX TER)

37 AXLE AND BRAKE ITEMS (DEX TER) ITEM PART NO. DESCRIPTION QTY AXLE 122-1/2, 12-1/4 X 7-1/2 SPG BK (25K) AXLE 122-1/2, 12-1/4 X 7-1/2 SER BK (25K) 1A* D-2H12 BEAM W/ BRACK ETS 1 **K BRAKE SHOE HDWR KIT (12.25X7.5) (ITEMS 2, 3, 5, 6, 6A, 7, & 8) 2** BUSHING, SPIDER ANCHOR PIN 4 3** PIN, AN CHOR SHOE AND LIN ING AS SEM BLY 4 4A LIN ING - BRAKE BLOCK CAM 2 4B LIN ING - BRAKE BLOCK AN CHOR 4 K BRAKE BLOCK KIT 4 5** ROLLER 4 6** RE TAINER, ROLLER PIN 8 6A** RETAINER RING 8 7** SPRING, SHOE RE TRAC TOR 2 8** RETAINER PIN RETRACTOR SPRING 4 9** KEEPER SPRING 4 ***K CAM SHAFT RE PAIR KIT (ITEMS 10-15, & 22) 10*** D" WASHER - CAM SHAFT 2 11*** SEAL GREASE 4 12*** BUSHING CAMSHAFT SPIDER 2 13A*** WASHER CAM SHAFT END 2 14A*** RETAINER, CAMSHAFT END 2 15*** BUSHING CAMSHAFT SUPPORT CAM SHAFT, 26-1/2" LH (12.25 X 7.5 BRAKE, TRK) CAM SHAFT, 26-1/2" RH (12.25 X 7.5 BRAKE, TRK) SLACK AD JUSTER, AUTO MATIC NUT, IN NER SPIN DLE WASHER, SPIN DLE LOCK WASHER, TABBED SPIN DLE LOCK NUT, OUTER SPIN DLE 2 22*** FIT TING, GREASE AIR CHAM BER, SPRING BRAKE AIR CHAM BER, SERV ICE BRAKE SEN SOR BLOCK, LOWER SEN SOR BLOCK, UP PER RETAINER CLIP ABS SEN SOR, CAP SCREW 4 * WHEN OR DER ING THE BEAM WITH SPIN DLE, SPI DER, AND BRACK ETS AT TACHED, YOU WILL NEED THE BEAM NUM BER, TRACK LENGTH, BRAKE SIZE, AND CAM SHAFT LENGTH. ** THESE PARTS ARE AVAIL ABLE AS PART OF THE BRAKE SHOE RE PAIR KIT LISTED. *** THESE PARTS ARE AVAIL ABLE AS PART OF THE CAM SHAFT RE PAIR KIT LISTED. NOTE: FOR HUB AND DRUM IN FOR MA TION, SEE PAGE

38 m FIG URE 1-23 CYL IN DER, HY DRAU LIC DOCK LEV ELER HD 6 X

39 CYL IN DER, HY DRAU LIC DOCK LEV ELER HD 6 X 30 ITEM PART NO. DESCRIPTION QTY CYL IN DER, HY DRAU LIC DOCK LEV ELER HD 6 X PISTON ROD 1 2 * BUTT AND TUBE ASSEMBLY PISTON GLAND SPACER LOCKNUT PORT PLUG PO CHECK VALVE SET SCREW O-RING BU-WASHER BEARING RING RECTANGLE T-SEAL BEARING RING O-RING BU-WASHER Z-SEAL DU-BUSHING WIPER LEVEL SEAL PLUG SOCKET HEAD SCREW PACK ING KIT (ITEMS 10-17, 19) (CON TAINS ALL NEC ES SARY SEALS AND O-RINGS) * PART NOT SOLD SEP A RATELY. RE QUIRES PUR CHASE OF EN TIRE AS SEM BLY. 1-37

40 FIG URE 1-24 ABS BRAKE KIT ABS BRAKE KIT ITEM PART NO. DESCRIPTION QTY ABS BRAKE KIT 4S/2M- TRI/SPRD ECU/VALVE ASSEMBLY SENSOR EXTENSION CABLE (114586) POWER/DIAGNOSTIC CABLE 4.0M/3.0M DIAGNOSTIC SWITCH WARN ING LAMP LA BEL

41 huboabs FIG URE 1-25 OUT BOARD PI LOT MOUNT HUB AND DRUM OUT BOARD PI LOT MOUNT HUB AND DRUM ITEM PART NO. DESCRIPTION QTY HUB/DRUM 8 BOLT 12-1/4 PI LOT, ABS LONG STUD 1 HM IN NER BEAR ING CUP 1 2 HM IN NER BEAR ING CONE 1 3 HM OUTER BEAR ING CUP 1 4 HM OUTER BEAR ING CONE OUT BOARD MOUNTED BRAKE DRUM ( T80) HUB IRON 80 TH TONER RING FLANGE NUT STUD (4009) CAP HUB (3067) GAS KET OIL CAP SEAL WASHER SPLIT LOCK 5/ SCREW HEX HEAD CAP 5/16-18X3/4 GR WHEEL DISC PI LOT MOUNT 17.5 X 6.75 (NOT SHOWN) 1 16 TR573 VALVE STEM - STEEL WHEEL (NOT SHOWN) VALVE, EX TEN SION, STEM 3 (NOT SHOWN) 1 18 * ABS TONE RING 1 * THIS PART SHOULD BE RE PLACED IN CON JUNC TION WITH THE HUB. IT SHOULD NEVER BE SOLD SEPARATELY. 1-39

42 EMERGENCY/SUPPLY SERVICE/CONTROL TO U/C E-CHAIN TOP PORT m FIG URE 1-26 AIR SYS TEM, MAIN 1-40

43 AIR SYS TEM, MAIN ITEM PART NO. DESCRIPTION QTY AIR SYS TEM, MAIN SCREW HEX HEAD CAP 1/4-23 X 1-1/ S ADAPTER, FIT TING AIR 1/2TUBE X 1/4NPT FIT TING AIR 45 1/2TUBE X 1/2NPT FIT TING AIR 45 3/8TUBE X 3/8NPT FIT TING AIR 90 3/8TUBE X 1/4NPT B61 FRAME UN ION GLAD HAND RED AIR GLAD HAND BLUE AIR HOSE AS SEM BLY 3/8 X 259 REF NUT HEX LOCK 1/ PLUG PIPE S RE DUCER B61-6 TAG EMER GENCY LINE B61-7 TAG SERV ICE LINE TUB ING NY LON 1/2OD A/R NY LON TUB ING 3/8OD A/R VALVE AIR RELAY- FAST AIR BAL ANCE WASHER FLAT 1/4N BRAKE PROTECTION VALVE FIT TING, AIR UN ION TEE TUBING, NYLON 1/4 AR 1-41

44 m135156p1 FIG URE 1-27 WINCH IN STAL LA TION 30K, AIR RE LEASE, AIR TENSION (1 OF 3) 1-42

45 m135156p2 FIG URE 1-28 WINCH IN STAL LA TION 30K, AIR RE LEASE, AIR TEN SION (2 OF 3) 1-43

46 m135156p FIG URE 1-29 WINCH IN STAL LA TION 30K, AIR RE LEASE, AIR TEN SION (3 OF 3) 1-44

47 WINCH IN STAL LA TION 30K, AIR RE LEASE, AIR TEN SION ITEM PART NO. DESCRIPTION QTY WINCH IN STAL LA TION 30K, AIR TEN SION, AIR RELEASE MOUNT, DP30 AIR TENSION CA BLE AS SEM BLY 5/8 X 85 FLEX-X9 REF HOOK CLE VIS GRAB NUT HEX LOCK 1/2-13 GRB NUT HEX LOCK 5/8-11 GRB SCREW, HEX HEAD CAP 1/2-13 X 1-1/2 GR SCREW HEX HEAD CAP 5/8-11 X 2 GR WASHER FLAT 1/2W WASHER FLAT 5/8N S ADAPTER CHAIN LINK CON NECT ING 5/ CHAIN GR WINCH MODI FI CA TION (ITEMS 35 & 36) WINCH CA BLE AIR TEN SION 30K 1 15 RFB722X4 BAR, FLAT 1/2 X 1-1/2 X RSP956X5X5 PLATE, STEEL 1/2 X 5 X DE CAL, WINCH MOTOR BRACKET, PRES SURE REGULATOR FIT TING, 1/4 TEE FIT TING AIR 1/4PIPE TO 1/4TUBE FIT TING AIR 90 1/4TUBE TO 1/4NPT FIT TING AIR AN CHOR COU PLING FIT TING, AIR, UN ION TEE FIT TING BRASS PIPE SCREW MACH FLSTR HD #10-32 X 3/ TUB ING NY LON 1/4OD AR VALVE, AIR SHUT TLE VALVE AIR 3WAY, 2POS, PUSH- PULL 2 (NO PARTS BREAK DOWN) REGULATOR, AIR PRESSURE WASHER FLAT # WASHER SPLIT LOCK # BRAKE PROTECTION VALVE REF DE CAL, WINCH FREE SPOOL DE CAL, WINCH LEVEL WIND FIT TING AIR 90 1/4TUBE TO 1/4NPT WINCH, DP 30,000 LB (SEE PAGE 1-47)

48 1-46 FIG URE ,000# WINCH ITEMS

49 30,000# WINCH ITEMS ITEM PART NO. DE SCRIP TION QTY WINCH 30K ITEMS MOTOR END INSTALLATION MO TOR, HY DRAU LIC VALVE, COUNTERBALANCE 1 2A 9612 O- RING, 1/8 I.D. X 3/32 SEC TION 2 2B 9972 O- RING, 5/8 I.D. X 13/16 X 3/32 SEC TION BRAKE HOUS ING SUPPORT MOTOR END SHAFT BRAKE PISTON BRAKE PLATE DISC FRIC TION PLATE DRIVE BRAKE PIN DOWEL 5/16 DIA. X 3-1/ O- RING, 7 O.D. X 6-3/4 I.D O- RING, 6-1/2 I.D. X 3/16 SEC TION O- RING, 5-3/8 I.D. X 5-3/4 O.D. X 3/16 SEC TION RING, BACK- UP RING, BACK- UP 5-3/8 I.D BEAR ING BALL 1-3/4 I.D SPRING COMPRESSION CAP SCREW HEX HEAD 1/2-13 X 1-1/ WASHER LOCK 1/ SCREW CAP HEX HEAD 7/16 X 2-1/ WASHER LOCK 7/ SCREW CAP SOCKET HEAD 5/16 X SCREW CAP SOCKET HEAD 1/4-20 X 3-3/ O- RING 3 I.D. X 1/8 SEC TION TAG WARN ING (NOT SHOWN) SEAL SHAFT CAR TRIDGE COUN TER BAL ANCE WASHER THRUST BRONZE BEAR ING -TO RRIN GTON WASHER FLAT 1/2 SAE ASSEMBLY PLUG 1 DRUM INSTALLATION DRUM KEY DRUM WEDGE CA BLE 5/ O- RING 2-5/8 ID X 1/8 W SPACER 1 INPUT SHAFT INSTALLATION SHAFT IN PUT 1 GEAR END INSTALLATION GEAR RING SUP PORT GEAR END WASHER THRUST SHAFT OUT PUT

50 30,000# WINCH ITEMS ITEM PART NO. DE SCRIP TION QTY WASHER THRUST NY LON 3-1/2 OD X 3/16 SEC TION CARRIER ASSEMBLY PRIMARY CARRIER ASSEMBLY SECONDARY LA BEL WARN ING (NOT SHOWN) O- RING 8-3/4 I.D. X 1/8 SEC TION BEARING SEAL SHAFT GEAR SUN BUSH ING ID 1-1/4 OD X 1 LG 1 AIR/HYD. KICK OUT GEAR END COVER IN STAL LA TION COVER GEAR END PIS TON AKO B/C/D CYLINDER PISTON COU PLING DRIVE RING RE TAIN ING RD SEC 3 O.D. X.10 SEC O- RING 8-3/4 I.D. X 1/8 SEC TION BUSH ING BRONZE 3/8 I.D. X 3/8 L RING RE TAIN ING 1-1/ RING RE TAIN ING RD SEC.805 I.D SPRING COMPRESSION WASHER THRUST BRONZE 3.81 X.406 W O- RING 2-5/8 I.D. X 1/8 SEC TION O- RING 2-1/8 I.D. X 2-3/8 O.D PLUG SKT HD O- RING #10 7/ A 9992 O- RING.755 I.D. X.097 W PLUG SKT HD O- RING MAG # A 9992 O- RING.755 I.D. X.097 W CAPLUG #4 RED (NOT SHOWN) RELIEF VENT SCREW CAP HEX HEAD 3/8 X 16 X 5-1/ WASHER LOCK 3/ GEAR SUN AKO 1 BASE MOUNT INSTALLATION BASE MOUNT CUS TOM - B SE RIES - A LENGTH SCREW CAP HEX HAD 5/8-11 X 2-1/4 GR NUT HEX 5/8-11 GR WASHER LOCK 5/8 ME DIUM PLAIN RIVET DRIVE U TYPE #2 X 1/4 LONG (NOT SHOWN) PLATE INFORMATION (NOT SHOWN)

51 FIG URE 1-31 DE CALS 1-49

52 STREET SIDE CURB SIDE VIEW B-B m FIG URE 1-32 DE CAL IN STAL LA TION 1-50

53 DECAL INSTALLATION ITEM PART NO. DESCRIPTION QTY DECAL INSTALLATION 318 WHT/DRK 40K DE CAL, L WHITE DE CAL, BOWTIE WHITE DE CAL, LANDOLL WHITE DE CAL, HAULOLL WHITE WARN ING LAMP LA BEL, ABS (SEE PAGE 1-38 FOR LO CA TION) DE CAL, 318 WHITE DC DE CAL, C (WHITE) FRONT STRIPE, LEFT, WHITE FRONT STRIPE, RIGHT WHITE LAN DOLL, WHITE 5 X DE CAL, EN GINE CON TROLS DE CAL, CON CEN TRATED LOAD 40,000# DECAL, OPERATION, 3-AXLE BL DE CAL, TIRE CHANG ING PRO CE DURE DE CAL, TORQUE SPEC (WITH WHEEL BUN DLE) DECAL, PATENT DE CAL, WARN ING WINCH CA BLE DE CAL, WARN ING RIDE PO SI TION UN DER CAR RIAGE DECAL, REFLEXITE RED/WHITE AR DECAL, LIGHT DE CAL, EN ERGY BUMPER, CERT DE CAL, EN ERGY BUMPER, WARN ING DE CAL, ON/OFF LIGHT DE CAL, TRAILER BUMPER DE CAL, 5TH WHEEL/CURB-STR DOCK LEVELER DE CAL, AXLE/WINCH/HYD LAND ING GEAR DE CAL, WINCH FREE SPOOL REF DE CAL, WINCH LEVEL WIND REF DE CAL, WINCH MOTOR DE CAL, HY DRAU LIC COUPLER B61-6 TAG, EMER GENCY LINE REF 32 55B61-7 TAG, SER VICE LINE REF *IF TRAILER IS RE PAINTED OR IF DE CALS BE COME IL LEGI BLE, OR DER NEW ONES FROM THE FAC TORY AND RE PLACE. 1-51

54 m FIG URE 1-33 DOOR AND COVER IN STAL LA TION 1-52

55 DOOR AND COVER IN STAL LA TION ITEM PART NO. DESCRIPTION DOOR AND COVER IN STAL LA TION CHAIN KEY LAN DOLL (NOT SHOWN) TUBE ASSEMBLY, MANUAL STORAGE FRAME WELDMENT REF BUSH ING, NYLATRON TOOLBOX DOOR WELDMENT, TOOLBOX REF NUT FLANGE LOCK 3/ NUT HEX LOCK 1/2-13 GRB NUT HEX # SCREW HEX HEAD CAP 3/8-16 X 1 GR SCREW, RD HEAD SQ NECK 1/2-13X1-3/ SCREW RD HD SQ NCK 1/2-13 X 4-1/ SCREW SOCKET BUT TON CAP 1/2-13 X SCREW, RD HEAD SELF-TAP PING #6-20 X 3/ SCREW ROUND HEAD MA CHINE #10-24 X 3/ WASHER FLAT 3/ WASHER FLAT 3/ WASHER FLAT 1/ WASHER SPLIT LOCK # HOSE CLAMP 4-1/ LATCH MOUNT AD JUST STRIKER PLATE 2 22 BSL-6-4 RIVET FLANGE 3/16 X 1/

56 m FIG URE 1-34 UP PER DECK STAND INSTALLATION 1-54

57 UP PER DECK STAND IN STAL LA TION ITEM PART NO. DESCRIPTION QTY UPPER DECK STAND INSTALLATION SCREW, HEX HEAD CAP 1/2-13 X 1-3/4 GR EN GINE PACK AGE, 27 HP GAS (SEE PAGE 1-58) REF UP PER DECK FRAME WELDMENT REF MOUNT WELDMENT, EN GINE PACKAGE NUT, HEX LOCK 1/2-13 GRB WASHER, FLAT 1/2W

58 m123166p1 FIG URE HP GAS EN GINE PKG (1 OF 3) 1-56

59 m123166p FIG URE HP GAS EN GINE PKG (2 OF 3) 1-57

60 m123166p3 FIG URE HP GAS EN GINE PKG (3 OF 3) 27HP GAS EN GINE PACK AGE ITEM PART NO. DESCRIPTION QTY HP GAS EN GINE PACK AGE TANK, FUEL PLASTIC PIN, DOOR HINGE DE CAL, ENG PKG INSTRUCTIONS MOUNT, ENGINE ISOLATOR, KOHLER CH LATCH, FOLD ING T LOCKABLE SEAL, SPONGE RUB BER TRIM MOUNT WELD MENT, ENG PKG 25 HP HYD TANK WELDMENT 30G E/P EN GINE KOH LER 27 HP PUMP MOUNT KOHLER IGNITION SWITCH PUMP, HYDRAULIC HINGE, BASE MOUNT MOUNT, DOOR WELDMENT FITTING, FITTING HINGE, DOOR EX HAUST EXT WELDMENT HOSE VALVE, HYDR PRES SURE RE LIEF S PLUG, O-RING CLAMP, HOSE

61 27HP GAS EN GINE PACK AGE ITEM PART NO. DESCRIPTION QTY RE TURN LINE FILTER FILTER ELEMENT FIT TING, BR 90 BARB HOSE, 1/4 LOW PRES SURE FUEL LINE HOSE AS SEM BLY 3/4 X NUT, HEX LOCK 3/8-16 GRB NUT, HEX LOCK 1/2-13 GRB SCREW, HEX HEAD CAP 1/4-20 X 1 GR SCREW, HEX HEAD CAP 3/8-16 X 1-1/4 GR SCREW, HEX HEAD CAP 3/8-16 X 2 GR SCREW, HEX HEAD CAP 1/2-13 X 1-1/4 GR SCREW, HEX HEAD CAP 1/2-13 X 1-1/2 GR WASHER, FLAT 3/8W WASHER, FLAT 1/2W WASHER, SPLIT LOCK 1/ S ELBOW, COU PLER, DUST CAP MALE S ADAPTER S ADAPTER, S ADAPTER, TEE S ADAPTER, X BATTERY 12V BAT TERY CLAMP BRACKET CABLE, THROTTLE SCREW, HEX HEAD CAP 3/8-16 X 4 GR FILLER-BREATHER-STRAINER ASSEMBLY CLAMP, MUFFLER HOSE, 1-1/4 SUCTION CABLE ASSEMBLY, BATTERY POSITIVE CABLE ASSEMBLY, BATTERY NEGATIVE S ADAPTER, BULKHEAD COU PLER, DUST CAP FE MALE CLAMP, HOSE ISO LA TOR, KOH LER 25 HP MOUNT ADAPTER NUT, HEAVY HEX 1/4-20 GR PLATE, MO TOR FRONT HAR NESS, ENG PKG IG NI TION (NOT SHOWN) COVER WELDMENT U/D ENG PKG 30 GAL LATCH, FLEX I BLE DRAW LE VER ASSIST P_COUPL BLACK, PIPE COU PLING 3/ SCREW, HEX HEAD CAP 1/2-13 X 3 GR SCREW, RD HEAD CAP X 3/ WASHER, FLAT 3/ NUT, HEX LOCK GRA COU PLER, FLAT FACE MALE NOSE COU PLER, FLAT FACE FE MALE BODY BRACKET, CONTROLS HOSE AS SEM BLY 3/8 X HOSE AS SEM BLY 3/4 X PLUG, PIPE 3/ NUT, HEX LOCK 1/ WASHER, HEX LOCK 1/ WASHER, FLAT 1/4W

62 m FIG URE 1-38 BULK HEAD AS SEM BLY BULK HEAD ASSEMBLY ITEM PART NO. DESCRIPTION QTY BULKHEAD INSTALLATION BULK HEAD WELD MENT 48 X PIN HITCH LEVEL LINK COT TER PIN 1/4X DE CAL, 2" REFLEXITE TAPE, WHITE AR 1-60

63 m FIG URE 1-39 SPARE TIRE CAR RIER SPARE TIRE CAR RIER ITEM PART NO. DESCRIPTION QTY RACK IN STAL LA TION BHD, FRONT MOUNT BULKHEAD WELDMENT REF RACK WELD MENT BULK HEAD MOUNT SCREW HEX HEAD CAP 1/2-13X1 GR NUT HEX LOCK 1/2-13 GRB SCREW HEX HEAD CAP 1/2-13X5 GR WASHER FLAT 1/2W

64 17 10 SEE AIR LOWER DETAIL 10 9 SEE AIR RAISE DETAIL AIR LOWER DETAIL m AIR RAISE DETAIL FIGURE 1-40 AIR DUMP VALVE INSTALLATION 1-62

65 AIR DUMP VALVE INSTALLATION ITEM PART NO. DESCRIPTION QTY AIR DUMP VALVE INSTALLATION UNDERCARRIAGE ASSEMBLY REF FITTING, AIR FITTING, AIR FITTING, AIR FITTING, AIR UNION TEE FITTING, AIR NUT, HEX #10-24 GRB SCREW, RD HEAD MACH #10-24 X 3/ TUBING, NYLON 1/4 AR TUBING, NYLON 3/8 AR WASHER, SPLIT LOCK # DECAL PILOT VALVE VALVE, AIR RIDE CONTROL FITTING, AIR FITTING, ST TEE FITTING, AIR UNION TEE REF 1-63

66 5 1 6 m FIG URE 1-41 DUAL STROBE LIGHT IN STAL LA TION DUAL STROBE LIGHT IN STAL LA TION ITEM PART NO. DESCRIPTION QTY DUAL STROBE LIGHT IN STAL LA TION BEA CON, LIGHT HALOGEN PIN, P/O EXT LOCK SPRING, COM PRES SION P/O EXT LOCK ADAPTER, 4 POLE TO DC SOCKET PULL OUT, FLAG WELDMENT ROLL PIN, SLOT TED 3/16 X 1-1/

67 m FIG URE 1-42 FLAG AND BAN NER KIT FLAG AND BAN NER KIT ITEM PART NO. DESCRIPTION QTY FLAG AND BAN NER KIT FLAG BANNER SUP PORT WELDMENT, BANNER PTL PIN, MUD FLAP

68 m FIG URE 1-43 ROLLER AS SEM BLY, SLOPE ROLLER ASSEMBLY, SLOPE ITEM PART NO. DESCRIPTION QTY ROLLER ASSEMBLY, SLOPE FRAME WELDMENT REF ROD, ROLLER MOUNT ROLLER CA BLE, SLOPE ZERK FIT TING 1/ NUT HEX LOCK 1/2-13 GRB SCREW HEX HEAD CAP 1/2-13 X 3 GR

69 m FIG URE 1-44 UP PER DECK STAND AS SEM BLY, 10" UP PER DECK STAND AS SEM BLY, 10" ITEM PART NO. DESCRIPTION QTY UP PER DECK STAND AS SEM BLY, 10" HOLD-DOWN STAND WELDMENT STAND, 10" UP PER DECK NUT, HEX LOCK 1/2-13 GRB SCREW, HEX HEAD CAP 1/2-13 X 2 GR WASHER, FLAT, 1/2W

70 3 1 2 m FIG URE 1-45 D-RING INSTALLATION D-RING INSTALLATION ITEM PART NO. DESCRIPTION QTY D-RING INSTALLATION FRAME WELDNMENT REF AN CHOR TIEDOWN LOOP TIE DOWN LOOP

71 NU MERI CAL IN DEX 2 PART PAGE (4009) (3067) PART PAGE PART PAGE (2027 T80)

72 PART PAGE PART PAGE PART PAGE

73 PART PAGE PART PAGE PART PAGE

74 PART PAGE PART PAGE PART PAGE