PRODUCT INFORMATION. Latest Forming Tap Technology R-XPF-Series. Unsurpassed Performance as well as tool cost reduction!!
|
|
- Shana Porter
- 5 years ago
- Views:
Transcription
1 PRODUCT INFORATION test Forming Tp Technoogy -Series Unsurpsse Performnce s we s too cost reuction!!
2 test threing technoogy Improve too ife with the spir obe n smooth forming. Enbes high spee tpping with speciise thre profie to reuce friction het. Ie thre form prouces high rigi intern thres without burrs. Spir obe (15 right hn spir) Speciise roune thre profie Improve wer resistnce with V coting enbes forming not ony in mi stees n sheet mets but so in crbon stees n oy stees. Aso chieves ong too ife, sfe n stbe tpping in wter soube coont. In uminum cst oy tpping, prevent high too wering cuse by siicon content, n provies superior ong too ife. Smooth surfce Hrness n cutting spee seection imge for chorine-free wter-soube coont n Q HRC Hrness of Work teri S-XPF T-S-XPF VP-NRT 20 OI-S -X P F Tpping Spee m/min 1.
3 Dimensions V HSS 15 ISO 2 C/2,5 DIN 371 Type 2 EDP P Tp imit Stock , ,5 2, , ,5 3, , P V HSS 15 ISO 2 D/4 DIN 371 Price Type 1 EDP P Tp imit Stock , ,5 2, , ,5 3, , V HSS 15 ISO 3 GX C/2,5 DIN 371 -GX Price Type 2 EDP P Tp imit Stock ,5 GX ,5 2, ,7 GX ,5 3, ,8 GX GX Price Deivery from stock 2.
4 Tpping Dt Stbe n ong too ife in Stiness stee. SUS4 Too Work teri Hoe Size SUS4 Ø2,78 mm (Through) Tpping Hoes Hoes Continue (Hoes) Tpping ength mm(2d) (Through) Competitor A Hoes Excessive Wer Tpping Spee 15m/min Coont Non-Wter Soube After tpping hoes Competitor chine Vertic chining Center Possibe t 20m/min in severe Q ppiction. Q 20m/min Too 1 Tpping Hoes Work teri S45C (Ck45, 1045) Hoe Size Hoes Ø5,52 mm(through) Continue (Hoes) Tpping ength mm(1d) (Through) Competitor A Hoes Excessive Wer Tpping Spee Coont 20m/min Q After tpping hoes Competitor chine Vertic chining Center Enbes ong too ife even high spee t m/min. m/min Too 3 0, Work teri S45C (Ck45, 1045) Tpping Hoes (Hoes) Hoe Size Ø2,78 mm (Through) Hoes Continue Tpping ength mm(2d) (Through) Competitor A 9.80Hoes Excessive Wer Tpping Spee m/min Coont Wter Soube 10% Competitor B 4.55Hoes Excessive Wer chine Horizont chining Center CompetitorA CompetitorB 4.55 Hoes 8.80 Hoes 3. Goo wer conition B
5 Recommene Cutting Conitions Ie Tpping Spee (m/min) Work teri 10 ow Crbon Stees eium Crbon Stees C 0,4% 15~40 High Crbon Stees C 0,45% 15~ Aoy Stees SC 15~ Cst Stees SC 15~40 Stiness Stees SUS*1 5~15 Copper Cu 10~ Brss Brss Csting Bs-BsC 10~ Aminum Aoy Csting AC-ADC 20~40 Zinc Aoy Csting ZDC 10~ 20 Goo Dri for piot hoes WD-2D EX-SUS-GDS VPH-GDS - - Note : The inicte spees n fees re for tpping with chorine-free wter soube coont. *1 For stiness stee, use non-wter soube coont. Instruction for use 1. Check the forming conition in the sme wy s for convention thre-roing tps. 2. The sme hoe imeter size for TIN-NRT, VP-NRT n S-XPF cn be utiize. 3. Highy ubricting wter soube coont or non-wter soube coont is recommene for the coont. 4. Seect the mchine n the hoer with sufficient rigiity. 5. Cutting conitions my chnge epening on the strength of the work mteri, mchines, n toohoers.. The forme thre hs sm sit t the crest (See photo). 4.
6 Recommene Tp ris WD-2D EX-SUS-GDS WD Crbie Dri EX Go Dri VP Go Dri VPH-GDS CARBIDE WDI TIN V WDI h8 FIT HSSE h8 h7 35 ~40 XP h8 h7 *1 A ri imeters hve imits from 0 ~ mm,except those with intervs of 0.05mm. *2 Strt mnufcturing with WDI Coting from october DIN Form Unit:mm EDP No. Thre Size TAP imit Recommene Dri Hoes Size (For Forming Tps) in.~x. Dc Tp Dri : EDP No. WD-2D EX-SUS-GDS VPH-GDS , , , , , , , , , , , ~ 2.81 GX 2.79 ~ ~ 3.71 GX 3.9 ~ ~ 4.7 GX 4.5 ~ ~ 5.5 GX 5.55 ~
7 Notes.
8 OSG EUROPE s.. Avenue voisier 1 B-10 Z.I. Wvre - Nor Begium Te.: Fx: OSG TURKEY k.ve Tec. Sn.İç. ve Dış. Tic. A.Ş Rmi Kiş C. No:5 Eyüp İstnbu 3405 Turkey Te.: Fx: OSG FRANCE s..r.. Pris Nor rue e Bee Etoie, 4 ée u Ponnt BP 191 Roissy en Frnce F Roissy Ch. De Gue Ceex Frnce Te.: Fx: OSG NEDERAND Berijfsweg G Hrmeen Postbus DB Hrmeen The Netherns Te.: Fx: OSG UK t. Sheton house, 5 Bents Pipps Hi In Est, Bsion Essex SS14 3 BY Unite Kingom Te.: Fx: OSG GERANY Föhrenweg 22 D Eisingen / Fis Germny Te.: Fx: ROSAN INTERNATIONA CO. SR Reprezentnt excusiv OSG 23-, Nerv Trin Street Bucuresti Români Te Fx SWEDEN: Brnch office of OSG Scninvi A/S Abrhms Grän Bromö Sween Te: OSG SCANDINAVIA A/S (For Scninvin countries) ngebjergvenget Roskie Denmrk Te.: Fx: OSG - Comher S Bekorr 4 E Vitori-Gsteiz Spin Te.: Fx: OSG ITAIA s.r.. Vi Cirenic n. 52 int. 1/3 I Torino Ity Te.: Fx: SOVAKIA: Brnch office of OSG Begium s.. Sovki Te: info@osg-begium.com OSG POAND u.stroposk, Cisie Pon Te: Fx: OSG BEGIU s.. - n.v. Avenue voisier 1 B-10 Z.I. Wvre - Nor Begium Te.: Fx: OSG UK t Sheton House, 5 Bents Pipps Hi Inustri Estte Bsion, Essex, SS14 3BY Te (0) Fx + 44 (0) E-mi: ses@osg-uk.com web : uk.osgeurope.com Too specifictions subject to chnge without notice A rights reserve. OSG UK EUR02R13 OSG UK: uk.osgeurope.com The contents of this ctogue re provie to you for viewing ony. They re not intene for reprouction either in prt or in whoe in this or other meium. They cnnot be copie, use to crete erivtion work or use for ny reson, by mens without the express, written permission of the copyright owner. If prices re stte, they re netto unit-prices n ny eventu tx(es) hve to be e. The compny is not responsbe for ny printing error in technic, price n/or ny other t.
H-TAP. Taps for steels from 25~45 HRC. Volume 2
H-TA Tps for stees from 25~45 HRC Vome 2 KEY FEATURES: S-TA 1 H-Series : For stees from 25~45 HRC 2 Aso for too stees 3 Stem Oxie Tretment : Improve bricity 4 ower met : High wer resistnce H-SFT Threing
More informationPRODUCT INFORMATION VOL. III A-TAP SERIES A-SFT A-OIL-SFT A-POT
PRODUCT INFORATION A-TAP SERIES A-SFT A-OI-SFT A-POT O. III OSG's new premium brn "A-TAP Series" The nswer for your troubes ies here ost of tpping troubes re cuse by unstbe chip evcution. A-TAP Series
More informationSOMTA HSS DRILL SERIES. Volume 4
SOMTA DRI SERIES Voume 4 INDEX Dri Series 101 Jobber Dris... PAGE 4 1TT Jobber Dris... PAGE 7 177 Jobber Dris... PAGE 9 1AQ Jobber Dris... PAGE 11 164A Jobber Dris... PAGE 13 163A Stub Dris... PAGE 14
More informationAD & ADO SERIES Volume 4
New carbie ri series A & AO ERIE Voume 4 N E W C O A T I N G A - A O N E W E R I E A - A O N E W E R I E 78 IN N E W C O A T HANK IZE AE I N G A - A O N E W E R I E E R I E A - B R A N E R I E A - B R
More informationWDO-SUS. Coolant-through WDO carbide drill series for stainless steel WDO-SUS-3D WDO-SUS-5D
WDO-SUS -through WDO carbide drill series for stainless steel WDO-SUS-3D WDO-SUS-5D HIGHLY EFFICIENT TOOLS DESIGNED TO EXCEL IN DIFFICULT MACHINING ENVIRON MENT Finally, the answer you've been looking
More informationWDO-SUS. Coolant-through WDO carbide drill series for stainless steel WDO-SUS-3D WDO-SUS-5D
WDO-SUS -through WDO carbide drill series for stainless steel WDO-SUS-3D WDO-SUS-5D HIGHLY EFFICIENT TOOLS DESIGNED TO EXCEL IN DIFFICULT MACHINING ENVIRON MENT Finally, the answer you've been looking
More informationPRODUCT INFORMATION. HSS NON-STEP EXTRA LONG DRILLS 10 D, 15 D and 20 D! VOL.3 TDXL TDXL
PROUCT INFORMATION HSS NON-STEP EXTRA ONG RIS, an 2! VO.3 1 Newy eveope fat fute (Pat. P.) 2 4 Newy eveope ow-resistance thinning (Pat. P.) Newy eveope WX coating for ris 3 features four newy eveope technoogies
More informationTDXL Serie PRODUCT INFORMATION. Vol 2. HSS EXTRA LONG DRILLS 10 D, 15 D and 20 D! NEW TDXL
PRODUCT INFORMATION Serie HSS EXTRA LONG DRILLS D, D and 2 D! Vol 2 Newly developed flat flute (Pat. P.) Newly developed low-resistance thinning (Pat. P.) Newly developed WXL coating for drills features
More informationSumitomo Electric Carbide, Inc. DFC Milling Cutter Series
CAT.FCBROCHURE.3/18 Sumitomo Eectric Cride, Inc. FC Miing Cutter Series GS Chipreker Expnsion Improved chip contro for shouder miing High Efficiency, 90 Miing Cutter High Performnce oue-sided 6 Edge Inserts
More informationGStype/HGStype/WGStype
Tooing News No.E473 Achieving Stabe And Long Too Life With Exceent Chip Evacuation Super MutiDri GStype/HGStype/WGStype 2009-015 series series New J fute Design Achieves Exceent Chip Contro And Stabe Driing
More informationFree Machining Austenitic Ferritic + Martensitic Pure Titanium Titanium Alloys Stainless Steels Stainless Steels <950N/mm 2
& - Tps For Stinless Steels These top qulity Tps re mde in Switzerlnd, by DC-Swiss, one of the leding Tp Mnufcturers in Europe. All the Tps re mde of - (Powder Metl). This mteril hs proven to be the best
More informationEX-(SUS) SERIES. TiN-coated HSSE precision drills EX-SUS-GDS EX-SUS-GDR EX-GDS EX-GDR
EX-(U) ERIE TiN-coate HE precision ris EX-U-G EX-U-GR EX-G EX-GR X Key features: EX-U eries EX-U-GR 485 sizes increments of 0.01 from 2.0-6.0mm EX-U-G Wie variety of in-between sizes 635 sizes, increments
More informationB 220. B Compact FA PSS Type
-3-2.1 ompct PSS ype eetures In orer to respon quicky to wie rnge of nees, NSK keeps en-efector recircution system screws, which offer high-spee n ow-noise opertion n compct esign, in stnr stock s the
More informationBALL BEARINGS & STEEL SHAFTS
BA BEARINGS & STEE SHAFTS Every care has been taken to ensure the accuracy of the information containe in this catalogue, but no liability can be accepte for any errors or omissions. We reserve the right
More informationMini Mill-Thread (cont d) Mill-Thread Solid Carbide. Mill-Thread Solid Carbide for Threading and Grooving Deep Parts. Mini Chamfer Tools 34
Metric recision Toos t. CONTENTS Mi-Threa Soi Carbie rouct entification with cooant bore with interna cooant through the futes G ( ) G ( ) with interna cooant through the futes Whitworth with interna cooant
More informationTHREADING TECHNOLOGY Ê-7 --Ê- THREADING TOOLS FOR AEROSPACE. ÓÇÎxÊ > ià>þ. /i ʳ{ ÊÎÓÊ{ ÊÈÎÊÈÎ >Ýʳ{ ÊÎÓÊ{ ÊÈ{ÊÈ{ > \Ê v J`VÃÜ Ãà V
DO-01-04-07..N THRADING TCHNOLOGY We hve mde every effort to ensure tht the informtion (drwings, prints, technicl dt) given is correct. However, we do not ssume ny responsibility for ny errors, omissions
More informationRECOMMENDED PARAMETERS FOR ROUTING FR4
MULTILAYER ULTRA MICRO DRILL D840 D : Ø 1/8" (3.15 ) Coon Shnk On Request Shnk Di 3 0.050 0.060 0 0.05 0 0.080 0 0.00 0 On request : Inch sizes / Speci imensions : Non stock items / Artices Point Ange
More informationGennaio TiN-coated HSSE precision drills EX-(SUS) SERIES EX-SUS-GDS EX-SUS-GDR EX-GDS EX-GDR
TiN-coate HE precision ris EX-(U) ERIE EX-U-G EX-U-GR EX-G EX-GR Gennaio 2017 Key features: EX-U eries EX-U-GR 485 sizes increments of 0.01 from 2.0-6.0mm EX-U-G Wie variety of in-between sizes 635 sizes,
More informationHIGH PRESSURE SERVICE (PRESSURE SEAL) GATE, GLOBE & CHECK VALVE RANGE
IG PRESSURE SERVICE (PRESSURE SE) GTE, GOBE & CECK VVE RNGE POY VVES is one of the world s leading manufacturers of high specification high pressure service pressure seal design gate, globe & check valves,
More informationAQUA Drill EX FLAT Series New Drilling Technology
AQUA Drill EX FLAT Series New Drilling Technology New Sizes Expanded to 7 Type 1028 sizes Oil Hole, Long Shank series expands the applications AQUA Drill EX FLAT Series AQUA Drill EX FLAT, Regular, Long
More informationHIGH PERFORMANCE HOLE MAKING APPLICATIONS DIJET DRILL SERIES HOLE MAKING SERIES CATALOG NO DIJET INCORPORATED
HOE MAKING SERIES CATAOG NO. 000 HIGH PERFORMANCE HOE MAKING APPICATIONS IJET RI SERIES IJET INCORPORATE www.ijetusa.com Inexable S-Cut 40º Specifications - rilling epth 3x iameter PARTS l l Screw Wrench
More informationCATALOGUE DUCTS VENTILATION ELEMENTS. and. Production and sales office : Abrahámska 183; Malá Mača SLOVAKIA
CTOGUE of UCTS VENTITION EEMENTS Production sales office : brahámska 183; 925 21 Malá Mača SOVKI Phone : +421 31 / 701 08 41 Fax : +421 31 / 784 17 48 e-mail : tzbglobal@tzbglobal.sk www.tzbglobal.sk Unified
More informationTRS SERIES. Coolant-Through - Three fluted - Carbide Drills TRS-HO-3D TRS-HO-5D TRS-HO-10D
TR ERIE Coolant-Through - Three fluted - Carbide TR-HO-3D TR-HO-10D TR redefines the meaning of high speed drilling 1 3 flutes 2 Coolant through 3 eed exceeding 10% of drill diameter 4 0,1 increment in
More informationAQUA DRILL EX FLAT SERIES
AQUA DRILL EX FLAT SERIES NEW DRILLING TECHNOLOGY CELEBRATE THE POLE POSITION NEW AQUA EX COATING long tool life, by improved heat and wear resistance AQUA Drill EX FLAT Series AQUA Drill EX FLAT, Regular,
More informationAD-2D NEW Drilling Solid carbide 2xD
l A-2 NEW rilling oli carbie 2x irst choice in quality an performance Carbie rill with EgiAs coating Up to 2x or general purpose steels an cast iron 112 sizes P P P P K K H H H C: 0,2% C: 0,25-0,4% C:
More informationEPSM / EPSW. PN Coated End Mills for Machining of Stainless Steels FEATURES. Innovative cutting edge design increases tool life
EPSM / EPSW PN Coated End Mis for Machining of Stainess Stees FEATURES Innovative cutting edge design increases too ife New PN coating exhibits exceent adhesion and wear resistance EPSM: For both roughing
More informationSTEEL WIRE & ROPE FITTINGS
6 Contents Bever mintins wie rnge of wire rope n fittings tht cn be use for towing n lifting, pplictions. Furthermore Bever hs the bility to offer mnufcture slings me to orer. With Bever s ISO Qulity n
More informationSolenoid operated spool valve with soft switching NG10 ISO
WWMF1 Solenoid operted spool vlve with soft switching Flnge construction 4/3-wy with spring centred mid position 4/2-wy with spring reset Q mx = 12 l/min p mx = 35 r DESCRIION Direct operted solenoid spool
More information10/2017. Product Catalogue BRONZE BARS AND BEARINGS. Your first choice in bronze
10/2017 Prouct Catalogue BRONZE BARS AN BEARINGS Your first choice in bronze Oy Johnson Metall Ab Your first choice in bronze Oy Johnson Metall Ab casts an machines bronze-alloy plain bearings an machine
More informationSit universal joints with plain or needle roller bearings Series P - E - H (DIN 808)
Sit universl joints with plin or neele roller erings Series P - E - H (IN 808) P series joints re precision proucts me y 4 forks n soli pins mchine from one piece, to hve n extremely compct centrl lock.s
More informationCC-SERIES (Chip Control - Series)
PRODUT INFORMATION -NEO-SFT -SFT -POT -HL-SFT -SFT-SPT VOL.3 -SERIES (hip ontrol - Series) ompetitor 600 (Holes) Work mteril Int. thred size SUS304 M8 1.25 Tpping length 16mm Hole size Ø 6.8 -SFT 1,500
More informationCentering Rings (Aluminium AW-6082-T6 / Stainless Steel ) with O-Ring (CR/FPM (FKM)) d s. d 2. d 1
Centering Ring (Auminium AW-6082-T6 / Stine Stee 1.4301) wit O-Ring (CR/FPM (FKM)) 2 1 1 2 Orering Informtion Auminium/FPM (FKM) Auminium/CR Stine tee/fpm (FKM) 1) 1 2 Orering Informtion Auminium/FPM (FKM)
More informationBNZ Small hole boring bars DAL / DDL / DML. G High speed machining for super finishing hardened steel (HRC50~60) G Excellent surface roughness
SUMIBOON / SUMIDIA Precision BNBB M20 Sma hoe boring toos CBN cutting edge is brazed on to a soid carbide shank. Sma hoe boring BNZ M21 Sma hoe boring bars Soid carbide boring bars WB M22 CBN rooving System
More informationBall Cages, Aluminium
Ba Cages, Auminium 2 Ba cage with circip groove, Auminium Cage: Auminium Ba cages from 10 have a groove for a circip to DIN 471 (206.72.). Notes on ba bearing type guides at the beginning of chapter D.
More informationChelsea Doll Cottage
Please retain this information for future reference HRWRE ssembly Instructions PRTS LIST Item #65054 To order replacement parts, please visit www.kidkraft.com 2 1 3 4 5 6 9 7 10 14 15 11 13 17 12 1 19
More informationENGINE CONTROL (3VZ E)
ENGINE CONTRO (3VZ E) I5 IGNITION S R C R M M 7. 5 IGN 5 EFI 5 STOP ST IG 7 7 7 C C 5 Y G G G R STRTER REY [R/ NO. ] 5 3 80 T 3 FUSE OX [R/ NO. ] Y G 5 EFI MIN REY 0 G C G 5 C S8 STOP IGHT S R (/T) 3 3
More informationCapillary Thermometers according to DIN Nitrogen Filled Option: Contacts
Capillary Thermometers accoring to DIN 16206 Nitrogen Fille Option: Contacts measuring monitoring analysing Environmentally-frienly measuring system with non-toxic nitrogen Fast response time Measuring
More informationINTERCHANGEABLE BUSHINGS
INTERCHNGEE Index SECTION PROUCT PGE INEX................................................................................... - USHING TYPES..........................................................................
More informationThreadmill Nomenclature TR N L ISO C
Threami Nomencature 1 2 3 4 5 6 7 8 TR N 16 139 40 2.5 ISO C 1 - ine TR - Heica Futes TS - Straight Futes 2 - Too Type 3 E N - Externa Threa - Interna Threa 3 - Too Shank ia. 04-4.0 mm 06-6.0 mm 08-8.0
More informationSeries 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve
Series 250 Type 3251-1 nd Type 3251-7 Pneumtic Control Vlves Type 3251 Globe Vlve DIN version Appliction Control vlve for process engineering pplictions with high industril requirements Nominl size DN
More informationQuality HSS (EW 9 Co 10 - cobalt 10%). Ø x l mm 16 x x x x x
Engrver's points Tool holder its Cutting-Off nd Grooving Tools 1812-1816 Engrver's Points With rough-ground profile. For use on tempered nd chrome-nickel steel. For engrving lettering, profiling for contours,
More informationNEW ROUND INSERT CUTTER DE6G_/1DE6G_ DE6H_/1DE6H_ DE6K_/1DE6K_ ROUND INSERT CUTTER
NEW ROUND INSERT CUTTER DE6G /1DE6G DE6H /1DE6H DE6K /1DE6K ROUND INSERT CUTTER DE6G_/1DE6G_ DE6H_/1DE6H_ DE6K_/1DE6K_ Double sided / high economicl 8- resp. 16-fold indexble insert 2 different insert
More informationHURCO VDI40 TOOLING FOR HURCO
HURCO VDI40 TOOLING FOR HURCO Tae of Contents Quick Change Tooing Page 4 LinA Broach Page 5 Axia Page 6-8 Raia Page 7-9 Ajustae Ange Page 9 Static Toos Page 10-18 Accessories Page 19-21 2 Mouar esign for
More informationHot Air Thermostats. WTHc series. Special features. Brief description. Switching function. Approval/approval marks (see "Technical data")
Delivery ddress: Mckenrodtstrße 36039 Fuld, Germny Postl ddress: 36035 Fuld, Germny Phone: +9 66 6003-0 Fx: +9 66 6003-607 E-mil: mil@jumo.net Temple Bnk, Riverwy Hrlow, Essex CM0 DY, UK Phone: + 79 635533
More informationIGNITION SYSTEM SERVICE MANUAL NUMBER
IGNITION SYSTEM SERVICE MANUAL NUMBER 26 Specifictions Timing Timing (At Idle rpm) 1 1 BTDC 2 / 1 ATDC 3 / 2 ATDC 4 1 Timing must be set using specil procedure s outlined in this section. Timing cnnot
More informationThreadmill Nomenclature TMR N L ISO C
Threami Nomencature 1 2 3 4 5 6 7 8 TMR N 16 139 40 2.5 ISO C 1 - ine TMR - Heica Futes MR - Heica Futes TMS - Straight Futes 2 - Too Type 3 E - Externa Threa N - Interna Threa X - Externa an Interna 3
More informationPERFORMANCE AND KNOW-HOW
Linear and Motion Soutions PERFORMANCE AND KNOW-HOW Nadea represents 50 years of neede and cam foower bearing know-how. Our ong history in design and manufacturing has extended over the years to the products
More informationData Sheet T /4/5/6 EN
Dt heet T 8310-1/4/5/6 EN Pneumtic Actutors up to 750v2 cm² Type 3271 Type 3277 for integrl positioner ttchment Appliction Liner ctutors prticulrly suitble for ttchment to eries 240, 250, 280 nd 290 Vlves
More informationAquaREVO DRILLS NEW HIGHLY EFFICIENT AND MULTI-PURPOSE. Doubled tool life due to improved substrate, coating and cutting geometry
AquaREVO DRILLS HIGHLY EFFICIENT AND MULTI-PURPOSE CELEBRATE THE POLE POSITION NEW Doubled tool life due to improved substrate, coating and cutting geometry AquaREVO DRILLS STUB (3D) / REGULAR (5D) REVOlutionize
More informationBERMAD Waterworks. 400 Series. Basic Valve. ??????? WW-400 Basic Valve
Bsic Vlve??????? WW-400 Bsic Vlve The bsic Model WW-400 diphrgm ctuted hydruliclly operted vlve is t the leding edge of control vlve design. It combines simple nd relible construction with superior performnce,
More informationPrecision Universal Joint
Precision Universl Joint PREISION UNIVERSAL JOINT Sit universl joints with plin or neele roller erings E - H (IN 808) Of this series oth single n oule joints re ville. s E re with sliing ushes while type
More informationCONCEALED-HEAD SELF-CLINCHING STUDS AND STANDOFFS BULLETIN
ONEED-HED SE-INHING STUDS ND STNDOS BUETIN H 813 R e v 814 ONEED-HED SE-INHING STUDS ND STNDOS PEM self-clinching concealed-head studs and standoffs install permanently in steel or aluminum sheets as thin
More information/1505-I-20 TOO L HO L DERS 2015 GM 300
TO O L H O L D ERS A N D C L A M PI N G D E V I C ES 114 996/1505-I-20 ED I T I O N 2015 TOO L HO L DERS 2015 GM 300 high camping ce PERFECT CONCENTRICITY MAXIMUM OPERATIONAL SAFETY OPTIMAL COOLANT DELIVERY
More informationThe widest range to provide the optimum tailor made solutions to your fume and gas extraction needs.
FUME XTRACTION ARMS Improving your workspce Chemicl resistnt Antisttic Stndrd FX ARMS The widest rnge to provide the optimum tilor mde solutions to your fume nd gs extrction needs. Avilble in Stndrd, Antisttic
More informationStem Thermometers according to DIN Nitrogen Filled / Optional: Contacts
Stem Thermometers accoring to DIN 16205 Nitrogen Fille / Optional: Contacts measuring monitoring analysing Environmentally-frienly measuring system with non-toxic nitrogen Fast response time Measuring
More informationFINGER STRIPS. and other EMI shielding products. Characteristics
BERYLLIUM COPPER CONTCT FINGER STRIPS nd other EMI shielding products ppliction Due to their outstnding mteril nd electricl chrcteristics, eryllium copper fingers of different shpes nd dimensions re used
More informationWFX Series. Four-cornered shoulder mill for steel, stainless steel, and cast iron machining. High Performance Milling Systems. Stainless.
High Performnce Milling ystems eries our-cornered shoulder mill for steel, stinless steel, nd cst iron mchining teel tinless teel Cst Iron Grdes The type is the first series to offer the newly developed
More informationHSS-Drills. HSS-DrillS
-Dris -DriS Center dris Cutting direction Too materia Standard Diameter range (mm) Cataog no. Discount group Standard range, page Center dris without fat DIN 333 0,500-12,500 71600 132 367 eft-hand DIN
More informationS.B. 469 for information on GM applications). Both styles are shown in Figure 1. Figure 1
NO: 4263132 SERVICE BULLETIN DATE: January X,1993 Supersedes: S.B. 426R dated 11/7/89 SUBJECT: ZERO-CLEARAN CE GOVERNOR WEIGHT RETAINER ASSEMBLIES In June 1988, Stanadyne introduced a zero-cearance Eastomer
More informationGeorg Fischer Waga N.V. Your mechanical connection for plastic pipes restraint - non restraint d63 - d315. Products. Plast/Joint
Georg Fischer Wg N.V. Your mechnicl connection for plstic pipes restrint - non restrint - Proucts Plst/Joint Plst/Joint >> Your mechnicl restrint connection for plstic pipes >> With the increse use of
More informationHepcoMotion. Shaft precision steel and aluminium shaft
HepcoMotion Shaft precision steel an aluminium shaft Introucing the HepcoMotion Precision Shaft Correct Shaft selection is vital if maximum performance is to be achieve from your linear system. Hepco Precision
More informationFire protection. 3360e/3/06/09/3
Fire protection 3360e/3/06/09/3 Witzenmnn GmbH Östiche Kr-Frierich-Str. 134 75175 Pforzheim, Germny Phone +49 - (0)7231-581- 0 Fx +49 - (0)7231-581- 820 wi@witzenmnn.com www.witzenmnn.com Contents Sprinker
More informationNew Super Metric Ball Bushing * Bearings Technical Bulletin
ew Super Metric all ushing earings Technical ulletin Super Metric all ushing earings igh performance from superior esign: coefficient of friction as low as 0,001. This allows the use of smaller less expensive
More informationRod ends, series K (wide version), internal and external thread. Rod ends, series E (slim version), internal and external thread
Ro Ens an Spherical earings Overview Ro ens, series K (wie version), internal an external threa Page Maintenance free, plastic Ø 5-20mm... Lubricateable (S), steel Ø 2-40mm... Maintenance free (T), steel
More informationUniclass. Alumasc L7313:P421. CI/SfB. (52.3) Ih1 January Harmer SML. Socketless Soil and Waste Systems
Unicss Aumsc L7313:P421 CI/SfB (52.3) Ih1 Jnury 2009 Hrmer SML Socketess Soi n Wste Systems Mintining Fow of Informtion The ringe wesite of Aumsc Exterior Buiing Proucts Lt (Aumsc) is esigne to provie
More informationC-Line Linear guide system
www.bergab.ru adea S.r.. adea GmbH Via Meette, 16 20128 Miano Te. +39 02.27.093.297 Fax +39 02.25.51.768 Internet: www.nadea.it E-Mai: customer.service@nadea.it Rudof-Diese-Straße 28 71154 ufringen Te.
More informationCast Stainless Steel Butt-Weld Outlet Connection Data
180 Stainless Steel Cast Stainless Steel utt-weld Outlet Connection Data Josam cast stainless steel drains and cleanouts are regularly furnished with Schedule 40S butt-weld outlet connections. utt-weld
More informationElectrically operated directional spool valve with a soft-shift function type WE10P NS 10. up to 35 MPa up to 120 DATA SHEET - OPERATION MANUAL
LICTION Electriclly operted directionl spool vlve with soft-shift function type WE10 NS 10 Electriclly operted directionl spool vlve type WE10 is intended for chnging the direction of fluid flow in hydrulic
More informationIndexable Drills Series P2D P3D P4D P5D. Volume 3 NEW DRILL SIZES NEW INSERTS
169 AVAILABLE NOW DRILLS SIZE RANGE Ø15~20.5 & SIZE RANGE Ø34~63 Indexable Drills Series P2D P3D P4D Volume 3 DRILL SIZES INSERTS Key features: Phoenix P2D P3D P4D New chipbreakers avaialable for a wide
More informationPREFILL AND EXHAUST VALVE PV 100 TO PV 200
PREFILL ND EHUST VLVE Ref. No. Relese 08/2006 1 Description Set type construction. llows free flow from it's port to port. Flow from port to port cn e hd y pplying pilot pressure to it's port. The decompression
More informationCenter drills. Center drills without flat din 333. Center drills without flat din 333. Catalogue no. Catalogue no. Tool material
Center dris Center dris without fat din 333 Cataogue 71600 Standard dri for producing centre hoes acc. to din 332, Sheet 1, form a (without protecting chamfer). Center dris with Ø 0.5 and 0.8 mm are ony
More informationTungsten Carbide Burrs
Tungsten Carbie Burrs Material Groups,, Types of Cut PFERD tungsten carbie burrs are esigne for machining materials of virtually any strength. Their superior performance reflects an optimum combination
More informationFLOORPLATES. 123 Address Road, Fish Island Hackney Wick. Hepscott Road, Hackney Wick, E9 5EP
PLATES 123 Aress, Fish Isln Hckney Wick ott, Hckney Wick, E9 5EP WHAT S ISIDE APARTMET LISTIGS Gym BLOCK A BLOCK B BLOCK C Concierge Hckney Wick Sttion BLOCK A GROUD 4 OE 6 TWO 8 THREE 10 FOUR 12 FIVE
More informationEvery HVAC system requires many different parts and components for efficiently transporting air.
Ducting Every HVAC system requires mny different prts nd components for efficienty trnsporting ir. In its ducting rnge, BerinerLuft. offers products nd components for designing compete round or rectngur
More informationPipe Fittings 1/16 to 1 in. sizes 316 stainless steel, brass, and carbon steel NPT, ISO/BSP, and SAE threads
www.swagelok.com Pipe Fittings 1/16 to 1 sizes 316 stainless steel, brass, and carbon steel, /SP, and S threads 2 Pipe Fittings Contents Nipples Page 4 dapters, Gaskets Page 6 Reducing ushings, Reducers
More informationTrain Times. 11 December 2011 to 13 May Reading to Basingstoke
Trin Times December 20 to 3 My 202 6 Reing to CONTENTS This timetble shows the full service between Reing n. Reing to 5 Monys to Friys 9 Sturys 3 Sunys to Reing 5 Monys to Friys 9 Sturys 23 Sunys 25 n
More information200 DGR SALIENT FEATURES !!!
DIAPHRAGM INSTRUMENTS Hirlekr Precision mnufctures qulity ifferentil pressure instruments esigne to mesure the ifference in pressure etween two points in system n show it on single il instrument. A mgnetic
More informationLive Centers. High Speed Steel Main Line
ive enters igh Spee Steel Main ine MIN-IN: Reliable top of the range live center for N an conventional lathes, an grining machines With over-pressure security through isc springs oy an spinle moels: SM
More informationDC GEARED MOTOR MOTOR CATALOG
DC GEARED MOTOR MOTOR CATAOG ' DC MOTOR SPECIFICATIONS SPEED AND OAD CHARACTERISTICS NOOAD SPEED WORKABE AREA OCKED ROTOR CONDITION AS APPIED VOTAGE WI BE CHANGED The relationship between torque vs speed
More informationPush-in RTD temperature probe for heat meters with connecting cable for thermowells (type PS/PL)
elivery ddress: Mckenrodtstrße 14 36039 Fuld, Germny Postl ddress: 36035 Fuld, Germny Fx: +49 661 6003-607 Emil: mil@jumo.net Temple Bnk, Riverwy Hrlow, Essex, CM20 2Y, UK Fx: +44 1279 62 50 29 Emil: sles@jumo.co.uk
More information(mω) 1. Temperature ( C) Voltage (V) ULRG1 /
Resistors Metl Strip Current Sense Resistors Surfce Mount Metl Element Current Metl Element Sense Resistor UR Series UR Current Series Sense Resistor Mke Possible Resistnce R0005 (m ) to R015 (15m ) Metl
More informationLarge Pastel Kitchen
Please retain this information for future reference PRTS LIST ssembly Instructions Item #53181 To order replacement parts, please visit 3 7 1 2 4 6 5 14 8 10 11 12 13 15 16 17 24 25 28 33 9 34 35 36b Pink
More informationSpark Plug Fouling 3.0 Liter OptiMax
WARRANTY INFORMATION PARTS INFORMATION SERVICE INFORMATION Bulletin No. 2002-07 Circulte to: Sles Mnger Accounting Service Mnger Technicin Prts Mnger Sprk Plug Fouling 3.0 Liter OptiMx Models Affected
More informationPinzBOHR High Precision Boring Tools
PinzBOHR High Precision Boring Tools What to expect from our boring tools. Our European mae boring tools have been proven worl wie to be among the best you can buy. Machinists love our boring tools because
More informationUSA, INC. At the date of 30/04/2009: Lead free law passed. Law suggested
US, IC. US, IC. t the date of 30/04/2009: ead free law passed aw suggested CCORDIG CIFORI HET SFETY CODE 116875 VIE FROM SEPTEMER 2009 SERIES 171 F COMMERCI STYE rass ball valve, female/female, full port
More informationSafety Relay Unit. Ordering Information. Ultra Slim Safety Relay
Sfety Rely Unit Ultr Slim Sfety Rely Unit Models of width 17.5 mm (smllest Unit in the world s of Jnury 2001) vilble with 2 or 3 poles. Models of width 22.5 mm with 3 poles lso vilble. EN stndrds (TÜV
More informationHKK CURVED JAW COUPLINGS HITEX COUPLINGS
HKK CURVE JAW COUPINGS HITEX COUPINGS CURVE JAW COUPINGS Coupling selection The HKK jaw coupling selection shoul be mae accoring to IN 740-2. Proper imensioning of the coupling shoul be one to ensure that
More informationStandard Coiled Spring Pins Specifications and Technical Data
Standard oiled Spring Pins Specifications and Technical Data PIN DUTIES M Standard H Heavy ight MATERIA B High arbon Steel hrome Stainless Steel D Nickel Stainless Steel W Alloy Steel FINISHES K Plain,
More informationBalanced to G RPM s. the nose nut to be tightened to 100% Inspected,
WEER CHUCKS Mae in Why is the Weler Chuck the Best Choice? WHY THE esigne for Milling & rilling WEER CHUCK? The Weler Chuck is the most versatile chuck available in the market place toay! Balance to G2.5
More informationTNS. Stem Thermometers according to DIN EN nitrogen filled option: contacts. Environmentally-friendly measuring system with non-toxic nitrogen
Stem Thermometers accoring to DIN EN 13190 nitrogen fille option: contacts measuring monitoring analysing TNS Environmentally-frienly measuring system with non-toxic nitrogen Fast response time Measuring
More informationRPEA3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated with 8W Coil. Replaces HA /2007
Directionl Control Vlves Solenoid Operted with 8W Coil RPEA3-06 0/20 Size 06 (D 03) 350 br (5076 PSI) 80 L/min (2 GPM) Replces 2/2007 /3-, /2- wy directionl control vlves Enclosure type to IP65 Push button
More informationDryLin W Modular Guide Systems Product Range
! !!! Dryin W Dryin W Modulr Guide Systems Product Rnge Single ril nd ousing bering, round Order key complete pge 785 Ril Bering block K1 C3 G1 A3 WJ200UM-01-.. d d1 C6 C4 C5 di 1 WS-.. Illustrted rils
More information1
www.systems-sunight.com 1 2 www.systems-sunight.com SUNLIGHT s motive power (traction) batteries motivate your business, as they provide reiabe energy to your industria vehices every day. SUNLIGHT s speciaized
More informationProfileSolutions ALUMINIUM PROFILE & ACCESSORIES LEAK DETECTION + AUTOMATION TECHNOLOGY
Solutions EAK DETECTION + AUTOMATION TECHNOOGY AUMINIUM PROFIE & ACCESSORIES Our aluminium profiles are manufactured using high grade A6N0S-T aluminium and provided with longitudinal slots used to house
More informationParting Line Interlocks
144 Innovative old Interlocks Parting ine Interlocks For accurate alignment between mold halves ll machining can be done from the parting line saving set-up time and machining costs Components can be purchased
More informationFOR EVERYTHING ENCLOSURE
FOR EVERYTHING ENCLOSURE PVC EDGE PROTECTOR Provies excellent protection for steel eges 9 styles available Simple to install SEE PAGES 498-499 DRAWER SLIDES Available in light, meium an heavy uty Full
More informationES100 Series Electric Strike
ES100 Series Eectric Strike Gener Description The ES100 is cost efficient robust eectric strike ith soid construction of one-piece cst uminium body nd stiness stee striker. The ES100 offers the sme eve
More informationUniversal Parts. Exhaust Technologies. Dinex.dk. going the ex tra mile. going the extra mile.
Universal Parts Exhaust Technologies going the ex tra mile Dinex.dk www.dinex.net Contents Symbol Identification...3 Dinex Group... 4 Product Program...5 Clamps and Brackets FlexFit & FlexJoiner Clamps...
More informationIndexable Milling Tools
No. 315.4 Short Name Type: CRBIE Page Ba High Precision Finish - Carbide Shank Reguar BPF-W 8 5 4 BPF-W Ba High Precision Finish - Carbide Shank ong Neck 8 1 4 BPF-WE Ba High Precision Finish - Carbide
More informationKGD for Automatic Lathe
Cut-off Tool Cut-off Tool KGD KGD for Automatic athe Stable achining and ong Tool ife ower Production Costs Edge idths Available from 1.3 mm Excellent Chip Control ong Tool ife with EGACOAT NANO P1535
More information