Universal Parts. Exhaust Technologies. Dinex.dk. going the ex tra mile. going the extra mile.
|
|
|
- Christine Heath
- 5 years ago
- Views:
Transcription
1 Universal Parts Exhaust Technologies going the ex tra mile Dinex.dk
2 Contents Symbol Identification...3 Dinex Group... 4 Product Program...5 Clamps and Brackets FlexFit & FlexJoiner Clamps... 6 Circle & ButtFit Flat Clamps...7 PipeFit & TightFit Clamps... 8 HoseFit, Heavy Duty & CT Band Clamps... 9 Truck Make Clamps...10 U-Bolt Clamps DIN Clamps Hinged Clamps, Pipe Brackets & Pipe Clamps...14 V-Clamp Connection V-Clamp Connection Kits (Truck Make Specific) Heavy Duty V-Clamps V-Clamps ow eakage Exhaust Assembly Paste Rubber Mountings Rubber Mountings...18 Pipe & Silencer Straps Pipe & Silencer Straps Heat Shields Heat Shields Bends & Elbows Bends / Bends /...23 Elbows continued on next page 1
3 Contents - continued Pipes & Adaptors Straight Pipes...27 Extension Pipes...28 Tail Pipes...29 T & Y Adaptors, Connectors...30 Pipe Adaptors Pipe Connectors...32 Insulation...32 Flex Pipes...33 Bellows...36 Silencers Absorption Silencers...38 Auxiliary Heater Exhaust Flex pipes...38 Universal Silencers...39 Universal Silencers,...45 Spark Arrestors Spark Arrestors Pipe Spark Arrestors & Exhaust Trims...47 Catalytic Converters Universal Catalytic Converters Rain Caps Rain Caps Vertical Systems VIP Systems - Identifying the Correct VIP System...50 VIP Systems - Parts Specification...52 VIP Systems - Accessories Vertical Outlet Pipe Systems...54 Instruction Flex pipe mounting instruction...56 Notes 2
4 Symbol Identification = ength W = Width mm = Millimetre Inch = Inch = Diameter = Outside Diameter = Inside Diameter CR = Center ine Radius AU = Aluminised = Stainless Steel ZINC = Zinc Coated GAV = Galvanized SPD = Mild Steel OE = Original Equipment HP = Horse Power BP = Back Presure 3
5 Dinex Group - The Dinex Group is a leading global manufacturer and distributor of innovative engineered exhaust and emission control products and solutions for the heavy duty and gas engine industry. Today, the Dinex Group, headquartered in Denmark, operates through 16 companies and employs approximately 1300 dedicated people worldwide. The Dinex Group is present in 14 different countries with production and sales facilities in Denmark, UK, Finland, Germany, atvia, USA, Turkey, Russia and China. Additionally, the Dinex Group has sales companies in Spain, Italy, France, Germany, UK, Poland and Serbia. D D Headquarter R&D, Production, Development & Sales Production, Development & Sales Sales Distribution center D Dinex A/S, DK Dinex Ecocat Oy, FI Dinex atvia SIA, V Dinex Emission Inc., US Dinex Emission System, CN Dinex Deutschland GmbH Dinex Clamps td., GB Dinex RUS C, RU Dinex Egzoz ve Emisyon Tekn.sa, TR JV - Hubei Dinex Tongda Emission Solution Co. td., CN Dinex Exhausts td., GB Dinex Polska Sp. Z.o.o., P Dinex GmbH, DE Dinex Etma SAS, FR Dinex Italia S.R.., IT Dinex Ibérica Sistemas de Esca, ES Dinex Balkan D.O.O., RS Dinex Deutschland GmbH, DE Our vision is to create value to our customers throughout the entire exhaust system lifecycle through competitive edges and core values. Edges - Dinex offers Values - Dinex strives to be R&D and Co-creation Preferred OEM supplier Full range AEM tech. supplier Forefront technology In-house manufacturing capabilities Flexible and agile Close to customers A complete product range Reliable on-time delivery A trusted partner An independent partner 4
6 Broad Universal Product Program - from turbo to tailpipe Insulation Silencer Flex pipes & bellows Exhaust fittings Clamps Pipes Full scale value-added business support High availability, complete & progressive product range Global in-house manufacturing & R&D footprint Own core emission technologies High OE quality 5
7 FlexFit & FlexJoiner Clamps FlexFit Clamps Dinex no. Dinex no. flex pipe AU mm Inch mm Inch ,0 2 1/8 50, ,0 2 1/4 62,0 2 1/ ,0 2 1/4 62,0 2 1/ ,0 2 1/2 60,0 2 3/ ,0 2 2/3 63,5 2 1/ ,0 3 70,0 2 3/ ,2 3 1/5 76, ,0 3 1/3 80,0 3 1/ ,6 3 2/3 88,9 3 1/ ,0 4 1/5 100,0 3 7/ ,6 4 1/5 101, ,0 4 1/2 108,0 4 1/ ,0 4 1/2 110,0 4 1/ ,0 4 3/4 114,3 4 1/ , ,0 4 3/ ,0 5 1/5 127, ,0 6 1/5 152,0 6 pipe 75 mm flex FlexFit Clamps Dinex no. Dinex no. flex pipe 45 mm AU mm Inch mm Inch flex / / / pipe Material thickness 0,7 mm FlexJoiner Clamp Dinex no. Dinex no. flex AU mm Inch , ,0 3 1/ ,9 3 1/ ,7 4 3/ ,0 4 1/ ,5 4 1/ ,1 4 3/ ,0 5 1/ ,5 6 1/5 Tightening torque 80 Nm. Material thickness 0,7 mm 6
8 Circle & ButtFit Flat Clamps Circle Clamps Dinex no. mm Inch ZINC ,0-82, ,0-94,0 3 1/ ,0-107, ,0-114,0 4 1/ ,0-119,0 4 1/ ,0-132, ,0-154,0 6 ButtFit Flat Clamps Dinex no. Dinex no. mm Inch AU , ,0 2 1/ ,3 2 3/ ,5 2 1/ ,9 2 3/ , ,9 3 1/ , ,0 4 1/ ,3 4 1/ , ,0 5 1/ ,4 6 Tightening torque 80 Nm. Material thickness 0,7 mm 75 mm 7
9 PipeFit & TightFit Clamps PipeFit Clamps Dinex no. mm Inch Clamp size range mm ,6 1 7/ , ,0 2 1/ ,3 2 3/ ,5 2 1/ ,7 2 5/ ,9 2 3/ , ,4 3 1/ , ,9 3 1/ , , , ,3 4 1/ , , ,7 5 1/ , Tightening torque 60 Nm. Material thickness 1.5 mm Heavy Duty TightFit Clamps Dinex no. Dinex no. mm Inch AU ,0-54, ,0-57,0 2 1/ ,0-63,0 2 3/ ,0-67,0 2 1/ ,0-69,0 2 5/ ,0-74,0 2 3/ ,0-81, ,0-84,0 3 1/ ,0-89,0 3 1/ ,0-93,0 3 1/ ,0-94,0 3 1/ ,0-105, ,0-106, ,0-116,0 4 3/ ,0-119,0 4 1/ ,0-127,0 4 3/ ,0-132, ,0-158,0 6 Tightening torque 30 Nm. Material thickness 1.5 mm ,0-146,0 5 1/ ,0-163,0 6 1/5 35 mm 25 mm 8
10 HoseFit, Heavy Duty & CT Band Clamps HoseFit Clamps Dinex no. mm Inch A mm ,0-55, / ,0-59,0 2 1/5-2 1/ ,0-63,0 2 1/3-2 1/ ,0-68,0 2 1/2-2 2/ ,0-85, / ,0-97,0 3 1/2-3 4/ ,0-112, / ,0-121,0 4 2/5-4 4/ ,0-133,0 4 4/5-5 1/ ,0-140, /2 30 A CT Band Clamps Dinex no. mm Inch /4-2 1/ /4-2 5/ /4-3 1/ /4-3 5/ /4-4 1/ /4-4 5/ /4-5 1/ /4-5 5/ /4-6 1/ /4-6 5/ /4-7 1/ /4-7 5/ /4-8 1/ /4-8 5/ /4-9 1/8 Heavy Duty Clamps Dinex no mm Inch AU ,5-48,5 1 4/5-1 9/ ,5-50,5 1 9/ ,5-53, / ,5-55, / ,5-58,5 2 2/5-2 1/ ,5-60,5 2 1/4-2 2/ ,5-63,5 2 2/5-2 1/ ,5-65,5 2 1/2-2 2/ ,5-68,5 2 2/3-2 7/ ,5-70,5 2 2/3-2 7/ ,5-73,5 2 4/5-2 9/ ,5-75,5 2 9/ ,5-78, / ,5-80, / ,5-85,5 3 1/4-3 2/ ,5-90,5 3 2/5-3 1/ ,5-94,5 3 5/8-3 5/ ,5-100,5 3 4/ ,5-104, / ,5-107,5 4 1/8-4 1/ ,5-110,5 4 1/4-4 1/ ,5-114,5 4 2/5-4 1/ ,5-120,5 4 5/8-4 6/ ,5-124,5 4 4/5-4 7/ ,5-127,5 4 7/ ,5-127, / ,5-133,5 5 1/8-5 1/4 28 mm 15,8 mm 9
11 Truck Make Clamps DAF U-Bolt Clamps M10 Dinex no A mm C mm mm Inch OE ZINC ,0 40,0 72,0 2 3/ ,0 40,0 84,0 3 1/ ,0 40,0 92,0 3 5/ ,0 40,0 96,0 3 3/ ,0 40,0 98,0 3 3/ ,0 40,0 105,0 4 1/ ,0 40,0 109,0 4 1/ ,0 40,0 120,0 4 3/ ,0 60,0 130,0 5 1/ ,0 40,0 142,0 5 5/ ,0 40,0 155, ,0 80,0 155, ,0 55,0 165,0 6 1/2 A C Scania Clamps Dinex no. mm Inch OE AU ,0-119,0 4 1/ ,0-124,
12 Truck Make Clamps Volvo/Renault Clamps Dinex no. Dinex no. mm Inch OE AU ,0-42,0 1 5/ ,0-45,0 1 3/ ,0-48,0 1 7/ ,0-51, ,0-55,0 2 1/ ,0-58,0 2 1/ ,0-61,0 2 3/ ,0-64,0 2 1/ ,0-67,0 2 5/ ,0-71,0 2 3/ ,0-74,0 2 7/ ,0-77, ,0-82,0 3 1/ ,0-87,0 3 1/ ,0-96,0 3 5/ ,0-106,0 3 7/ ,0-107, ,0-114,0 4 1/ ,0-120,0 4 3/ ,0-128, ,0-135,0 5 1/ ,0-147,0 5 3/ ,0-159,0 6 Mercedes/Iveco Clamps Dinex no. mm Inch OE Design AU ,5-62,5 2 3/ A ,0-66,0 2 1/ A ,0-68,0 2 1/ A ,0-70,0 2 3/ A ,0-77, A ,0-79, A ,0-83,0 3 1/ A ,5-90,5 3 1/ A ,0-96,0 3 3/ A ,0-100, A ,0-105, / B ,0-107, A ,0-110,0 4 3/ B ,0-118,0 4 1/ / B ,0-122,0 4 3/ / B ,0-132, B ,0-135,0 5 1/ B ,0-151,0 5 3/ B Design A Design B 11
13 U-Bolt Clamps U-Bolt Clamps - M8* Dinex no. Dinex no. A mm C mm mm Inch ZINC ,0 25,0 29,0 1 1/ ,0 23,0 32,0 1 1/ ,0 26,0 37,0 1 3/ ,0 26,0 38,0 1 1/ ,0 29,0 44,0 1 5/ ,0 25,0 45,0 1 3/ ,0 25,0 48,0 1 7/ ,0 25,0 52, ,0 25,0 54,0 2 1/ ,0 40,0 57,0 2 1/ ,0 33,0 60,0 2 3/ ,0 43,0 60,0 2 3/ ,0 35,0 65,0 2 1/ ,0 22,0 67,0 2 5/ ,0 22,0 70,0 2 3/ ,0 22,0 73,0 2 7/ ,0 27,0 70,0 2 3/ ,0 25,0 76, ,0 35,0 76, ,0 25,0 80,0 3 1/ ,0 24,0 83,0 3 1/ ,0 25,0 88,9 3 1/ ,0 30,0 89, ,0 40,0 89,0 3 1/ ,0 30,0 92,0 3 5/ ,0 40,0 95,3 3 3/ ,0 30,0 102, ,0 50,0 102, ,0 35,0 105,0 4 1/ ,0 40,0 114,3 4 5/ ,0 50,0 114,3 4 5/ ,0 40,0 114,3 4 5/ ,0 33,0 127, ,0 48,0 130,0 5 1/ ,0 62,0 139,7 5 1/2 * Can be used for trailers (example - mud flaps) C A 12
14 DIN Clamps DIN Clamps Dinex no. Dinex no. mm Inch Mercedes OE MAN OE AU ,3 1 1 / ,5 1 1/ ,5 1 3/ ,5 1 7/ , ,5 2 1/ , ,5 2 1/ ,5 2 3/ ,5 2 1/ , ,5 2 5/ ,5 2 3/ ,5 2 3/ , , ,5 3 1/ , ,5 3 3/ ,5 3 1/ ,5 3 3/ , , ,5 4 1/ ,5 4 1/ ,5 4 3/ ,5 4 1/ ,5 4 3/ ,5 4 7/ , ,5 5 1/ mm Material thickness 3-5 mm. 13
15 Hinged Clamps, Pipe Brackets & Pipe Clamps Hinged Clamps ZINC mm Inch , ,5 2 1/ ,5 2 1/ ,5 2 1/ ,5 2 5/ ,5 2 3/ ,5 2 7/ ,5 2 7/ , ,5 3 1/ ,5 3 1/ ,5 3 3/ ,5 3 1/ ,5 3 3/ ,5 3 7/ ,5 4 1/ ,5 4 3/ ,5 4 1/ ,5 4 3/ ,5 4 7/ ,5 5 1/8 Pipe Clamps Dinex no mm Inch ZINC / / / / /4 Pipe Brackets Dinex no. mm Inch C mm C Inch mm Design ZINC , /2 85,0 A A ,0 2 3/8 11 1/2 90,0 A ,0 2 3/4 11 1/2 100,0 A , /2 105,0 A ,0 3 1/8 11 1/2 122,0 A ,0 3 1/2 11 1/2 115,0 B ,0 3 7/8 11 1/2 120,0 B ,0 4 3/8 11 1/2 150,0 A ,0 4 1/2 11 1/2 155,0 A ,0 4 3/4 11 1/2 160,0 B B C C Material thickness 4 mm 14
16 V-Clamp Connection Kits (Truck Make Specific) DAF Dinex no. Dinex no. Dinex no. Dinex no. Dinex no. Dinex no. mm Inch Male Male Clamp Clamp Female Female AU AU AU , ,3 4 1/ ,0 5 Mercedes Male Clamp Female Dinex no. Dinex no. Dinex no. Dinex no. Dinex no. Dinex no. mm Inch Male Male Clamp Clamp Female Female AU AU AU , , ,0 3 3/ ,0 3 7/8 Volvo Dinex no. Dinex no. Dinex no. Dinex no. Dinex no. Dinex no. mm Inch Male Male Clamp Clamp Female Female AU AU AU ,9 3 1/ ,9 3 1/ , ,3 4 1/ ,0 5 Scania Dinex no. Dinex no. Dinex no. mm Inch Male Clamp Female AU AU AU ,3 4 1/ ,0 5 Other Clamps Dinex no. Dinex no. mm Inch Design ZINC ,0 4 1/ , , , , ,9 3 1/ ,0 4 1/ ,4 3 1/ , , Mercedes style 3 DAF/Volvo style 2 Volvo style 4 Volvo style 15
17 Heavy Duty V-Clamps Dinex no. Dinex no. A mm mm Inch B C mm D mm E mm Bolt AU Clamp Pipe Pipe Vee Angle Vee Depth Vee Tip Strap Size , ,6 20 M , R 2,5 none M6 A ,5 2 1/2 40 5,8 6,75 20 M ,5 2 1/ M ,5 2 1/ M ,5 2 1/ R 2,5 none M , , M , M , M , M ,9 3 1/ ,3 20 M ,9 3 1/ M6 B C ,9 3 1/ M ,9 3 1/ M6 D E Reinforcement strap ,9 3 1/2 40 7,1 6,8 20 M ,9 3 1/2 84 9,6 8,1 25 M , ,3 6,6 25 M , M , ,26 20 M , ,65 20 M , M ,3 4 1/ ,16 25 M ,3 4 1/ M ,3 4 1/ none M ,3 4 1/2 86 9,5 8,1 25 M ,3 4 1/ M ,3 4 1/ M ,3 4 1/ ,2 25 M , ,6 25 M , M , M , M , M , none M , M , ,26 20 M , ,5 8,8 25 M , ,5 20 M , ,2 20 M6 16
18 V-Clamps ow eakage (for Euro IV to VI Applications) Single Bolt (For Applications < 550 C) Dinex no. Dinex no. 1 Dinex no. Dinex no. 2 Clamp* Male** mm Gasket Female** mm mm Inch , ,9 3 1/ , ,3 4 1/ , Male Clamp Gasket Female Double Bolt (For Applications < 1000 C) Dinex no. Dinex no. 1 Dinex no. Dinex no. 2 Clamp* Male** mm Gasket Female** mm mm Inch , ,9 3 1/ , ,3 4 1/ ,0 5 *Max tightening torque 40 Nm - two 8 mm bolts ** Material: Stainless steel grade EN Exhaust Assembly Paste Dinex no ml Withstand temperatures up to 1000 C. 17
19 18 Rubber Mountings s M M12 M M Universal M M12 M12 M12 M12 M 10 M 8 27 M8 20
20 Pipe & Silencer Straps Dinex no mm Inch Dinex no mm Inch AU AU ,0 2 3/ x280 7 x 10 3/ , x302 8 x 11 7/ ,9 3 1/ , ,0 4 1/ ,3 4 1/ mm x280 7 x 10 3/ x x x280 7 x 10 3/ x /8 x 11 7/ , x x 19 7/ , x x , , , ,0 10 1/ , ,0 11 3/ ,0 12 Dinex no mm Inch AU , , ,0 7 1/ , , , , mm , , Adjustable Silencer Strap Dinex no AU Dinex no mm Inch AU /2 Material thickness 3 mm /2 For body straps for specific vertical systems, please see seperate sections of the catalogue (page 53-54) Material thickness 3 mm
21 Heat Shields Dinex no. mm Dinex no. mm Dinex no. B (x2) C , , , , , , , , , , , , C Bx2 Dinex no. mm mm 1 mm ZINC pipe diameter Brackets are included 20
22 Bends / 90 (/) Dinex no. Dinex no. mm mm Inch CR AU ,0 1 1/2 54, ,0 1 3/4 64, ,0 2 95, ,8 2 95, ,0 2 1/4 85, ,0 2 3/8 100, ,5 2 1/2 85, ,5 2 1/2 85, ,0 2 5/8 91, ,0 2 3/4 98, , , ,2 3 99, ,0 3 1/8 115, ,9 3 1/2 135, ,9 3 1/2 177, ,0 3 7/8 203, , , , , ,0 4 3/8 148, ,0 4 3/8 148, ,3 4 1/2 161, ,3 4 1/2 161, ,0 4 3/4 170, , , , , , ,0 Material thickness ranging from 1,5 to 2,0 mm. CR 21
23 Bends / 60 (/) Dinex no. mm mm Inch CR AU ,0 1 1/2 54, ,0 1 5/8 95, ,0 2 95, ,0 2 95, ,0 2 3/8 100, ,0 2 5/8 91, ,0 2 3/4 135, , , ,2 3 99, ,0 3 1/4 115, ,9 3 1/2 135, ,0 3 5/8 177, , , ,0 4 3/8 148, ,3 4 1/2 161, ,0 4 3/4 173, , ,0 CR 45 (/) Dinex no. Dinex no. mm mm Inch CR AU ,0 38,0 1 1/2 54, ,0 38,0 1 1/2 54, ,5 45,0 1 3/4 64, ,0 50,0 2 95, ,0 57,0 2 1/4 85, ,0 60,0 2 3/8 100, ,0 63,5 2 1/2 85, ,0 63,5 2 1/2 85, ,0 63,5 2 1/2 85, ,0 65,0 2 5/8 91, ,0 70,0 2 3/4 98, ,0 76,2 3 99, ,0 80,0 3 1/8 115, ,0 88,9 3 1/2 177, ,0 100,0 3 7/8 203, ,0 101, , ,0 101, , ,0 110,0 4 3/8 148, ,0 114,3 4 1/2 161, ,0 120,0 4 3/4 170, ,0 127, , ,0 127, , ,0 152, ,0 CR Material thickness ranging from 1,5 to 2,0 mm. 22
24 Bends / 90 (/) Dinex no. Dinex no. mm mm mm Inch CR AU ,0 38,0 1 1/2 54, ,0 45,0 1 3/4 64, ,5 50,0 2 95, ,3 51,0 2 95, ,6 57,0 2 1/4 85, ,5 60,0 2 3/8 100, ,0 63,5 2 1/2 85, ,0 63,5 2 1/2 85, ,3 65,0 2 5/8 91, ,3 70,0 2 3/4 98, ,5 75, , ,5 76,1 3 99, ,7 76, , ,4 88,9 3 1/2 177, ,1 101, , ,1 101, , ,1 101, , ,1 101, , ,5 108,0 4 1/4 148, ,5 110,0 4 3/8 148, ,8 114,3 4 1/2 161, ,0 120,0 4 3/4 170, ,0 127, , ,0 127, , ,5 152, ,0 Material thickness ranging from 1,5 to 2,0 mm. CR 23
25 Bends / 60 (/) Dinex no. mm mm mm Inch CR AU ,0 38,3 38,0 1 1/ ,0 48,3 48, ,0 50,3 50, ,0 60,3 60,0 2 3/ ,0 65,3 65,0 2 5/ ,0 70,3 70,0 2 3/ ,0 75,3 75, ,0 80,3 80,0 3 1/ ,4 89,2 88,9 3 1/ ,0 90,3 90,0 3 5/ ,0 100,3 100, ,0 110,3 110,0 4 3/ ,0 114,6 114,3 4 1/ ,0 120,3 120,0 4 3/ ,0 127,3 127, CR 45 (/) Dinex no. Dinex no. mm mm mm Inch CR AU ,0 39,0 38,0 1 1/2 54, ,5 46,0 45,0 1 3/4 64, ,0 51,3 50,0 2 95, ,0 51, , ,0 57,6 57,0 2 1/4 85, ,0 60,5 60, , ,0 60,5 60,0 2 3/8 100, ,0 64,0 63,5 2 1/2 85, ,0 64,0 63,5 2 1/2 85, ,0 65,5 65,0 2 5/8 91, ,0 70,3 70,0 2 3/4 98, ,0 75,5 75, , ,0 76,7 76,1 3 99, ,0 89,4 88,9 3 1/2 177, ,0 102,1 101, , ,0 102,1 101, , ,0 108,5 108,0 4 1/4 148, ,0 110,5 110,0 4 3/8 148, ,0 114,8 114,3 4 1/2 161, ,0 121,0 120,0 4 3/4 170, ,0 128,0 127, , ,0 128,0 127, , ,0 128,0 127, , ,0 153,5 152, ,0 CR Material thickness ranging from 1,5 to 2,0 mm. 24
26 Elbows / Dinex no. mm Dinex no. mm mm Inch SPD , ,5 2 1/ , ,9 3 1/ , , ,0 4 1/ ,3 4 1/ ,3 4 1/ ,0 5 / (Cast) Dinex no. Dinex no. mm Inch T mm CR SPD ,0 2 3/8 2, ,0 2 3/4 2, ,1 3 2, ,1 3 2, ,9 3 1/2 2, ,9 3 1/2 3, ,6 4 3, ,0 4 2, ,0 4 1/4 3, ,8 4 1/2 2, ,3 4 1/2 3, ,0 5 1/8 2, ,0 5 1/4 4,0 188 / (Welded/Thin Wall) Dinex no. Dinex no. mm Inch T mm CR T SPD ,8 2 1,5 50, ,5 2 1/2 1,5 50, ,5 2 1/2 1,5 63, ,2 3 1,5 63, ,2 3 1,5 76, ,9 3 1/2 1,5 76, ,9 3 1/2 1,5 88, ,6 4 1,5 85, ,6 4 1,5 101, ,0 4 1/4 1,5 76, ,3 4 1/2 1,5 96, ,3 4 1/2 1,5 114, ,0 5 1,5 100, ,0 5 1,5 127, ,0 5 1/8 1,5 100,0 T Material thickness ranging from 1,5 to 2,0 mm. 25
27 Elbows / Dinex no. Dinex no. 1 mm 2 mm mm mm Inch SPD ,0 51, ,5 64,0 2 1/ ,1 77, ,0 89,5 3 1/ ,9 91,0 3 1/ ,6 102, ,6 102, ,0 108,5 4 1/ ,0 111,0 4 1/ ,3 114,5 4 1/ ,0 128, ,0 128, ,0 128, / Dinex no. Dinex no. 1 mm 2 mm mm Inch SPD , ,0 2 1/ , , ,5 3 1/ ,5 3 1/ , , ,5 4 3/ ,5 4 1/ ,5 4 1/ ,8 4 1/ , Material thickness ranging from 1,5 to 2,0 mm. 26
28 Straight Pipes AU Dinex no. Dinex no. Dinex no. mm Inch M STEE Dinex no. Dinex no. Dinex no. mm Inch 2000mm 3000mm 6000mm ,0 1 1/ ,0 1 3/ , ,0 2 1/ ,0 2 1/ ,0 2 3/ ,5 2 1/ ,0 2 5/ ,0 2 3/ ,0 2 7/ , ,0 3 3/ ,9 3 1/ , , ,0 4 1/ ,3 4 1/ ,0 4 3/ , ,0 5 1/ ,0 5 7/ , mm 3000mm 6000mm ,0 1 1/ ,0 1 3/ ,0 1 1/ ,0 1 3/ ,0 1 7/ , ,0 2 1/ / ,0 2 3/ , ,0 3 1/ ,0 3 1/ ,9 3 1/ , ,0 4 1/ ,0 4 5/ ,3 4 1/ , ,0 6 5/16 Dinex no. Dinex no. Dinex no. mm Inch 1000mm 2000mm 2500mm ,0 1 1/ , , ,0 2 3/ ,0 2 1/ , ,9 3 1/ , ,3 4 1/ ,0 5 Material thickness 1,5 mm. 27
29 Extension Pipes AU Dinex no. Dinex no. Dinex no. Dinex no. mm mm Inch 600mm 1000mm 1500mm 2500mm ,3 50, ,6 60,0 2 1/ ,5 60,0 2 3/ ,0 63,5 2 1/ ,3 69,8 2 3/ ,7 76, ,4 88,9 3 1/ ,1 101, ,5 108,0 4 1/ ,0 110,0 4 3/ ,8 114,3 4 1/ ,0 120,0 4 3/ ,0 127,0 5 Dinex no. Dinex no. Dinex no. mm mm Inch 1000mm 1500mm 2500mm ,0 63,5 2 1/ ,7 76, ,9 89,4 3 1/ ,1 101, ,8 114,3 4 1/ ,0 127,0 5 Material thickness 1,5 mm. 28
30 Tail Pipes Tail Pipes Dinex no. Dinex no. mm Inch mm AU , ,0 3 1/ ,9 3 1/ ,9 3 1/ , , ,0 4 3/ ,3 4 1/ ,0 4 1/ ,0 4 1/ ,3 4 1/ , , , Dinex no. mm Inch mm AU ,3 4 1/2 313 Tail Pipes Dinex no. Dinex no. mm Inch mm AU , ,5 2 3/ ,5 2 5/ ,5 2 3/ , , , , , ,5 3 1/ ,2 3 1/ ,5 3 1/ ,5 3 1/ ,5 3 1/ ,0 3 7/ , , , ,0 4 3/ ,0 4 3/ ,3 4 1/ ,0 4 1/ ,0 4 1/ ,0 4 1/ ,0 4 1/ ,0 4 3/ ,0 4 3/ , ,
31 T & Y Adaptors, Connectors Dinex no. Dinex no. mm Inch AU , ,0 3 1/ ,3 4 1/ ,0 5 Dinex no. mm Inch AU , ,0 3 1/ ,6 4 Dinex no. mm Inch AU ,0 3 1/ ,0 4 Dinex no. / mm / Inch AU ,5/110,0 4 3/8-4 /8 Dinex no. mm Inch Design ,3 4 1/2 T 30
32 Pipe Adaptors / Dinex no. 1 mm 2 mm 1 Inch 2 Inch / Dinex no. Dinex no. mm mm Inch Inch AU AU ,0 60, / ,5 64,0 2 3/8 2 1/ ,5 70,5 2 3/8 2 3/ ,5 76,7 2 3/ ,5 70,8 2 1/2 2 3/ ,5 76,7 2 3/ ,5 90, / ,7 89, / ,7 103, ,5 89,5 3 1/8 3 1/ ,5 102,1 3 1/ ,4 102,1 3 1/ ,4 108,5 3 1/2 4 1/ ,4 110,5 3 1/ ,4 114,8 3 1/2 4 1/ ,5 114,8 3 1/2 4 1/ ,0 103, ,0 114, / ,0 109, / ,0 50,0 1 1/ ,0 63, / ,5 60,0 2 1/8 2 3/ ,5 61,5 2 1/8 2 3/ ,5 65,0 2 1/8 2 1/ ,5 60,0 2 1/4 2 3/ ,5 2 1/4 2 3/ ,5 61,5 2 3/8 2 3/ ,5 70,0 2 1/2 2 3/ ,8 76,2 2 3/ ,7 88, / ,0 102, ,4 101,6 3 1/ ,5 110,0 3 1/2 4 3/ ,0 108, / ,1 114, / ,5 114,3 4 1/4 4 1/ ,0 127, ,0 127,0 4 1/ ,1 110, ,1 114, / ,1 127, ,5 114,8 4 1/4 4 1/ ,5 120,5 4 1/4 4 3/ ,5 127,5 4 1/ ,5 114,8 4 1/2 / 200 mm 200 mm Dinex no. Dinex no. mm mm Inch Inch ,5 120,5 4 3/ ,5 127,5 5 AU ,0 38, / ,8 127,5 4 1/ ,5 127,5 4 3/ ,0 54,0 2 1/4 2 1/ ,0 57,5 2 3/8 2 1/ ,5 50,0 2 1/ ,5 60,0 2 5/8 2 3/ ,0 76, mm 200 mm ,4 76,2 3 1/2 3 / Dinex no. 1 mm 2 mm 1 Inch 2 Inch AU /8 2 1/ /8 2 3/ /8 2 3/ /8 2 1/2 Material thickness 1,5 mm ,0 89,0 3 7/8 3 1/ ,0 76, ,0 102, ,1 88, / ,5 101, / ,8 101,6 4 1/ ,0 102, ,0 127,
33 Pipe Connectors / Dinex no. mm Inch mm AU , ,0 2 3/ ,0 2 5/ ,0 2 3/ , , ,0 3 1/ ,0 3 1/ , , ,0 4 3/ ,0 4 1/ ,0 4 3/ , Material thickness 1,5 mm / Dinex no. mm Inch AU / /8 Material thickness 1,5 mm 200 mm Insulation Dinex no. ayer Dimensions Reflect Ins layer 50 mm/5,5 mm Reflect Ins layer 100 mm/5,5 mm Protective outer layer 80 mm/5,0 mm 32
34 Flex Pipes ZINC Dinex no. Dinex no. mm Inch mm Inch Flex 1000mm 2000mm ,0 1 1/7 25,0 1 D2S ,0 1 1/3 30,0 1 1/8 D2S ,0 1 2/5 32,0 1 1/4 D2S ,0 1 3/5 36,0 1 3/8 D2S ,0 1 5/7 39,0 1 1/2 D2S ,0 1 4/5 42,0 1 5/8 D2S ,0 1 9/10 45,0 1 3/5 D2S ,0 2 48,0 1 7/8 D2S ,0 2 1/6 51,0 2 D2S ,5 2 2/6 54,5 2 1/8 D2S ,0 2 2/5 58,0 2 1/4 D2S ,0 2 1/2 64,0 2 3/8 D2S ,0 2 1/6 66,0 2 1/2 D2S ,0 2 5/7 67,0 2 5/8 D2S ,0 2 4/5 70,0 2 5/8 D2S ,0 2 9/10 77,1 2 3/4 D2S ,1 3 1/5 81,0 3 D2S ,0 3 1/3 83,0 3 1/8 D2S ,0 3 2/5 86,0 3 1/4 D2S ,0 3 1/2 88,9 3 1/2 D2S ,9 3 5/7 93,0 3 1/2 D2S ,0 3 4/5 95,0 3 5/8 D2S ,0 3 8/9 101,0 3 3/4 D2S ,0 4 1/8 102,7 3 7/8 D2S ,7 4 1/5 108,0 4 D2S ,0 4 2/5 110,0 4 1/4 D2S ,0 4 1/2 115,5 4 3 /8 D2S ,5 4 5/7 121,2 4 1/2 D2S ,2 4 9/10 126,5 4 3/4 D2S ,5 5 1/8 128,3 5 D2S ,3 5 1/5 131,5 5 D2S ,5 5 1/3 141,0 5 1/3 D2S ,0 5 3/4 141,0 5 1/2 D2S ,5 6 1/5 153,5 6 D2S+ Max temperature 550 degrees - corrosion can occur at high temperatures. - compressed length D2S D2S+ 33
35 Flex Pipes Dinex no. Dinex no. mm Inch mm Inch Flex 1000mm 2000mm ,0 1 1/7 25,0 1 D2S ,0 1 2/5 32,0 1 1/4 D2S ,0 1 5/7 39,0 1 1/2 D2S ,0 1 4/5 42,0 1 5/8 D2S ,0 1 9/10 45,0 1 3/4 D2S ,0 2 1/6 51,0 2 D2S ,0 2 1/4 54,0 2 1/8 D2S ,0 2 2/5 58,0 2 1/4 D2S ,0 2 1/2 61,0 2 3/8 D2S ,0 2 1/6 64,0 2 1/2 D2S ,0 2 5/7 66,0 2 5/8 D2S ,0 2 9/10 70,0 2 3/4 D2S ,1 3 1/5 77,1 3 D2S ,0 3 1/3 81,0 3 1/8 D2S ,0 3 1/2 86,0 3 2/5 D2S ,9 3 5/7 88,9 3 1/2 D2S ,9 3 5/7 89,9 3 1/2 D3S ,0 4 1/8 101,0 3 7/8 D2S ,7 4 1/5 102,7 4 D2S ,7 4 1/2 102,7 4 D3S ,0 4 2/5 108,0 4 1/4 D2S ,0 4 1/2 110,0 4 3/8 D2S ,5 4 5/7 115,5 4 1/2 D2S ,2 4 9/10 121,2 4 3/4 D2S ,5 5 1/8 126,5 5 D2S ,3 5 1/5 128,3 5 D2S ,3 5 1/5 128,3 5 D3S ,5 5 1/3 131,5 5 1/8 D2S ,0 5 2/3 140,0 5 1/2 D2S ,5 6 1/5 153,5 6 D2S+ Max temperature 550 degrees. - Convoluted Flex Dinex no. mm mm Inch mm Inch - compressed length D2S D2S+ D3S ,0 4 77, ,0 4 1/2 90,0 3 1/ , ,
36 Flex Pipes (<1000 mm) Dinex no. mm mm mm Inch Flex ,0 51,0 2 D2S ,0 61,0 2 3/8 D2S ,0 64,0 2 1/2 D2S ,0 70,0 2 3/4 D2S ,0 77,0 3 D2S ,0 77,0 3 D2S ,0 77,0 3 D2S ,0 90,0 3 1/2 D2S ,0 90,0 3 1/2 D2S ,0 90,0 3 1/2 D2S ,0 90,0 3 1/2 D2S ,0 90,0 3 1/2 D2S ,0 90,0 3 1/2 D2S ,0 101,0 3 7/8 D2S ,0 101,0 3 7/8 D2S ,7 102,7 4 D2S ,0 103,0 4 D2S ,0 103,0 4 D2S ,0 103,0 4 D2S ,0 103,0 4 D2S ,0 103,0 4 D2S ,0 111,0 4 3/8 D2S ,0 115,0 4 1/2 D2S ,0 115,0 4 1/2 D2S ,0 115,0 4 1/2 D2S ,0 115,0 4 1/2 D2S ,0 115,0 4 1/2 D2S ,0 115,0 4 1/2 D2S ,0 115,0 4 1/2 D2S ,5 115,9 4 1/2 D2S ,5 121,5 4 3/4 D2S ,3 128,3 5 1/16 D2S ,3 128,3 5 1/16 D2S ,0 128,0 5 D2S+ Max temperature 550 degrees. - compressed length D2S D2S+ 35
37 Flex Pipes Flex Pipes with Joints Dinex no. A-end B-end mm Flex Type mm Type mm Plain 71,5 Slitted 77,0 365 D2S Plain 88,9 Slitted 90,5 365 D2S Slitted 76,0 Slitted 72,5 365 D2S Plain 110,0 Flex 111,0 415 D2S Plain 110,0 Flex 111,0 375 D2S+ Slitted Flex Plain Bellows With Exterior Steel Braid Dinex no. mm / mm C mm D mm C , , , , / D / , , , , , , With Steel Braid & Inner Flex ayer Dinex no. mm / mm C mm D mm C , , , , / D / , , ,
38 Bellows Additional Bellow Types Dinex no. mm / mm C mm D mm C , / / , D , , Dinex no. mm mm C mm D mm C , D C Dinex no. mm mm C mm D mm , D Dinex no. mm mm C mm D mm C , , Single layer Outer braider Dinex no. mm mm C mm D mm D C , Single layer ,2 180 D Dinex no. mm mm C mm C ,0 288 Double layer Dinex no. mm mm ,0 Single layer Outer braider 37
39 Absorption Silencers Dinex no. mm mm mm Inch AU , ,5 2 3/ ,0 2 1/ , , ,0 4 3/ ,0 4 1/ , ,0 6 Auxiliary Heater Exhaust Flex pipes Auxiliary heater exhaust flex pipes (Double-layer) Dinex no. Dinex no. Dinex no. mm Wall thickness Bending 1000mm 2000mm 20000mm mm Radius mm ,7 ~ ,7 ~48 Material: Thermal resistance: -40 C to C ,7 ~ ,7 ~ ,7 ~ ,7 ~
40 Universal Silencers 50-70/ HP (kw = HP/1,36) Dinex no. HP KW mm mm Inlet Outlet AU ,5 50,8 Dinex no. HP KW mm mm Inlet Outlet AU ,0 51,0 Dinex no. HP KW mm mm Inlet Outlet AU ,0 50,0 Outlet Inlet Dinex no. HP KW mm mm Inlet Outlet AU ,0 77,0 Dinex no. HP KW mm mm Inlet Outlet AU D 66,0 66,0 Dinex no. HP KW mm mm Inlet Outlet AU ,0 66,0 Dinex no. HP KW mm Wx Inlet Outlet W AU x277 66,0 90,5 Dinex no. HP KW mm Wx Inlet Outlet W AU x302 71,0 66,0 39
41 Universal Silencers / HP (kw=hp/1,36) Dinex no. HP KW mm Wx Inlet Outlet W AU Outlet Inlet x330 77,0 76,0 - Dinex no. HP KW mm mm Inlet Outlet AU ,0 88,9 Dinex no. HP KW mm mm Inlet Outlet Inlet AU Outlet ,0 77,0 Dinex no. HP KW mm mm Inlet Outlet AU ,0 77,0 Dinex no. HP KW mm mm Inlet Outlet Inlet AU Outlet ,0 77,0 Dinex no. HP KW mm mm Inlet Outlet AU ,0 90,5 Dinex no. HP KW mm mm Inlet Outlet Outlet AU Inlet ,0 75,0 Dinex no. HP KW mm mm Inlet Outlet Outlet AU Inlet ,0 75,0 Dinex no. HP KW mm Wx Inlet Outlet W AU x277 81,0 90,5 Dinex no. HP KW mm Wx Inlet Outlet W AU x277 81,0 90,5 40
42 Universal Silencers / HP (kw=hp/1,36) Dinex no. HP KW mm mm Inlet Outlet AU ,0 90,0 Dinex no. HP KW mm mm Inlet Outlet Inlet AU Outlet ,5 102,0 Dinex no. HP KW mm mm Inlet Outlet Outlet AU ,0 115,5 Inlet Dinex no. HP KW mm Wx Inlet Outlet W AU X277 90,5 86,0 Dinex no. HP KW mm Wx Inlet Outlet W AU x277 90,5 71,0 Dinex no. HP KW mm Wx Inlet Outlet W AU x330 90,5 85,0 Dinex no. HP KW mm mm Inlet Outlet AU ,5 89, ,5 90,5 Dinex no. HP KW mm mm Inlet Outlet Outlet AU Inlet ,5 90,5 Dinex no. HP KW mm Wx Inlet Outlet W AU X277 90,5 85,0 41
43 Universal Silencers / HP (kw=hp/1,36) Dinex no. HP KW mm mm Inlet Outlet AU ,0 103,0 Dinex no. HP KW mm mm Inlet Outlet AU ,0 102,0 Dinex no. HP KW mm mm Inlet Outlet AU ,0 104,0 Dinex no. HP KW mm mm Inlet Outlet AU ,0 100,0 Dinex no. HP KW mm mm Inlet Outlet AU Inlet ,0 85,0 Outlet Dinex no. HP KW mm mm Inlet Outlet AU ,0 102,0 Dinex no. HP KW mm mm Inlet Outlet AU ,0 111,0 Dinex no. HP KW mm Wx Inlet Outlet Outlet W AU x ,3 111,3 Inlet 42
44 Universal Silencers / HP (kw=hp/1,36) Dinex no. HP KW mm mm Inlet Outlet AU ,0 115,0 Dinex no. HP KW mm Wx Inlet Outlet W AU x ,0 115,0 Dinex no. HP KW mm mm Inlet Outlet AU ,0 114,3 Dinex no. HP KW mm mm Inlet Outlet Outlet AU Inlet ,0 114,3 Dinex no. HP KW mm Wx Inlet Outlet AU Inlet Outlet W x ,0 115,0 Dinex no. HP KW mm mm Inlet Outlet AU ,5 101,5 Inlet Outlet Dinex no. HP KW mm Wx Inlet Outlet W AU x ,0 114,3 Dinex no. HP KW mm mm Inlet Outlet AU ,0 128,0 Dinex no. HP KW mm Wx Inlet Outlet W AU x ,0 128,0 Dinex no. HP KW mm mm Inlet Outlet Inlet AU Outlet ,0 128,0 43
45 Universal Silencers / HP with Heat shield (kw=hp/1,36) Dinex no. HP KW mm mm Inlet Outlet AU ,0 61,0 Dinex no. HP KW mm mm Inlet Outlet AU ,0 61,0 Dinex no. HP KW mm mm Inlet Outlet AU D 103,0 103,0 Dinex no. HP KW mm mm Inlet Outlet AU ,0 115,0 44
46 Universal Silencers, / HP (kw=hp/1,36) Dinex no. HP KW mm mm Inlet Outlet ,5 89,0 Dinex no. HP KW mm mm Inlet Outlet Outlet ,5 101,6 Inlet Dinex no. HP KW mm Wx Inlet Outlet W x277 89,5 89,5 Outlet Dinex no. HP KW mm mm Inlet Outlet ,0 140,0 Inlet 45
47 Spark Arrestors Universal Dinex no. mm mm mm mm HP AU ,0 50, ,0 60, ,5 63, ,0 76, ,0 88, ,0 101, ,0 114, ,0 127, Combined Silencers and Spark Arrestors Dinex no. mm mm mm mm HP AU ,6 101, ,0 114, ,0 127, Combined Silencers and Spark Arrestors Dinex no. mm mm mm mm HP AU ,0 101, Combined Silencer and Spark Arrestor Dinex no. mm mm mm mm HP AU ,0 140,
48 Pipe Spark Arrestors & Exhaust Trims Dinex no. mm GAV ,5-39, ,5-44, ,5-49, ,5-54, ,5-59,0 Repair Kit Dinex no. GAV Dinex no. GAV Dinex no. mm GAV , , , , , , , , , , , , , , ,0-126, ,0-136,0 Adaptor Dinex no. mm GAV Exhaust Trims Dinex no. ZINK mm mm ,
49 Universal Catalytic Converters <3,5 tr. Catalytic Converter <3,5 tr. Accessories Dinex no Dinex no. Pipe Adapter ,0 76, ,0 51, ,0 58, ,0 61, ,5 64, ,0 66, ,0 71,0 3,5-8 tr. Catalytic Converter Dinex no. 3,5-8 tr. Accessories Dinex no. Pipe Adapter ,0 76, ,0 76, ,0 77, ,0 81, ,0 90, ,0 91, ,0 101, ,6 102, tr. Catalytic Converter Dinex no tr. Accessories Dinex no. Pipe Adapter ,0 76, ,0 77, ,0 81, ,0 90, ,0 91, ,0 101, ,6 102, ,0 109, ,0 111, ,3 115,0 48
50 Rain Caps Dinex no. Dinex no. mm Inch ZINC , ,5 2 3/ ,5 2 1/ ,5 2 3/ , ,5 3 1/ ,0 3 1/ ,5 3 7/ , ,5 4 3/ ,0 4 1/ ,5 4 3/ , ,0 6 Dinex no. mm Inch ZINC ,0 1 3/ , ,0 2 1/ ,0 2 3/ ,0 2 5/ ,0 2 7/ , ,0 3 1/ ,0 3 1/ ,0 3 7/ ,0 4 3/ ,0 4 1/ ,0 4 3/ ,0 5 1/8 49
51 VIP Systems - Identifying the Correct VIP System Choose VIP system according to the engine power output. Ensure that the VIP pipe diameter is the same or larger than the original pipework. Select quality of VIP materials. Pipe in/outlet size Material 3 inch 3½ inch 4 inch 4 inch 4½ inch 5 inch (77 mm) (89,5 mm) (103 mm) (103 mm) (115 mm) (128 mm) A 1/1 2/1 3/1 4/1 5/1 6/1 AS 1/2 2/2 3/2 4/2 5/2 6/2 SS 1/3 2/3 3/3 4/3 5/3 6/ Engine Output Power (HP) A = All parts in aluminised steel AS = Heat shield and tail pipe in stainless steel, other parts in aluminised steel SS = All parts in stainless steel 50
52 VIP Systems - Identifying the Correct VIP System VIP Silencer Tail pipe Heat shield For silencer Clamp A For heat shield Clamp B For pipes Clamp C System (x2) (x2) (x2) 1/ / / / / / / / / / / / / / / / / /
53 VIP Systems - Parts Specification Silencers Dinex no. T mm T Inch mm Inch B mm B Inch mm Inch HP A / /2 184,0 7 1/4 77,0 3 < SS / /2 184,0 7 1/4 77,0 3 < A / /2 184,0 7 1/4 89,0 3 1/ SS / /2 184,0 7 1/4 89,5 3 1/ T A ,0 7 1/4 104, A ,0 9 3/4 104, SS ,0 9 3/4 104, B A ,0 9 3/4 115,0 4 1/ SS ,0 9 3/4 115,0 4 1/ A ,0 9 3/4 128, SS ,0 9 3/4 128, Tail Pipes For Silencers (A) Dinex no. mm Inch mm Inch A /8 76,0 3 Dinex no. mm Inch SS 184,0 7 1/ SS /8 76, SS 249,0 9 3/ A ,5 3 1/ SS /8 89,5 3 1/ A ,6 4 For Heat Shields (B) SS , A ,3 4 1/ SS ,3 4 1/2 Dinex no. mm Inch SS 184,0 7 1/ SS 249,0 9 3/ A , SS ,0 5 For Pipes (C) Dinex no. mm Inch Heat Shields A 80, SS 80,0 3 Dinex no. mm Inch mm Inch A 93,5 3 1/ A /8 214,0 8 3/ SS 93,5 3 1/ SS /8 214,0 8 3/ A 106, A /4 214,0 8 3/ SS 106, SS /4 214,0 8 3/ A 118,0 4 1/ SS /4 279,0 9 3/ SS 118,0 4 1/ A /4 279, A 132, SS /4 279, SS 132,
54 VIP Systems - Parts Specification Support Mast Dinex no Kit Grab Handles Dinex no. For heat shield
55 Vertical Outlet Pipe Systems Systems with Heat Shield 800 mm - ZINC Dinex no. Dinex no. Dinex no. Dinex no. Dinex no. Dinex no. System mm mm Heat shield A mm Tail Pipe Bend Clamp Cross bar Systems with Heat Shield 1000 mm - Dinex no. Dinex no. Dinex no. Dinex no. Dinex no. Dinex no. System mm mm Heat shield Clamp A mm Tail Pipe Bend Clamp Cross bar , , A
56 Vertical Outlet Pipe Systems Systems with Heat Shield 1200 mm - ZINC Dinex no. Dinex no. Dinex no. Dinex no. Dinex no. System mm mm A mm Tail Pipe Bend Clamp Cross bar Systems with Heat Shield 1200 mm - Dinex no. Dinex no. Dinex no. Dinex no. Dinex no. System mm mm A mm Tail Pipe Bend Clamp Cross bar A
57 Flex pipe mounting instruction Recommendation. Use Dinex FlexFit clamps together with exhaust sealing past to minimize leakage of exhaust gas. Please make spot welding after cutting the flex pipe to avoid the flex pipe loosening up. Dinex FlexFit clamp with Exhaust Sealing Paste indside to minimize the leakage of exhaust gas. The flex pipe must be in middle position for correct mounting. Extended Middle Compressed Bent The flex pipe should not be twisted or bent. 56
Dinex Group Trucks CNG Trucks. Marine. Buses CNG Buses. Trains & locomotives. Construction. Large stationary. Agricultural
Welcome to Dinex Dinex Group 2017 Leading globally OEM partner for development, manufactoring and delivering complete exhaust and emission technologies for the heavy duty industry and industrial equipment.
Industrial Range. Why Neumo...?
Why Neumo...? NEUMO opens the door to 1800 tonnes of Stainless Steel products. Our comprehensive stock range is carefully chosen to ensure NEUMO UK Ltd. can be your complete Stainless Steel logistics partner,
Air Brake Tubing and Coils
6 Air Brake Tubing and Coils Content - Section 6 Eurocoils Unicoils Air Coils Compact Coils Truck Coils Euroboom Rubber Air Hose Components Trace Nylon Imperial Nylon Metric Nylon 6.1 Air Brake Tubing
STEEL INDUSTRY ELECTRIC ARC FURNACES REFRACTORY CONCEPT SOLUTIONS
STEEL INDUSTRY ELECTRIC ARC FURNACES REFRACTORY CONCEPT SOLUTIONS TOGETHER FOR MORE AT CALDERYS, OUR MISSION IS TO DELIVER VALUE TO OUR CUSTOMERS. We are a world leader in providing refractory solutions
STEEL INDUSTRY STEEL LADLES REFRACTORY CONCEPT SOLUTIONS
STEEL INDUSTRY STEEL LADLES REFRACTORY CONCEPT SOLUTIONS TOGETHER FOR MORE AT CALDERYS, OUR MISSION IS TO DELIVER VALUE TO OUR CUSTOMERS. We are a world leader in providing refractory solutions and services.
Installation manual. Exhaust system. Marine engines DI09, DI13, DI16. 02:04 Issue 9.0 en-gb. Scania CV AB 2017, Sweden
Installation manual Exhaust system Marine engines DI09, DI13, DI16 333 380 02:04 Issue 9.0 en-gb Changes from the previous issue...3 Important data... 30 Sound reduction...3 Exhaust noise... 3 Exhaust
External Drive Axis Packages
External Drive Axis Packages for MOTOMAN Robots with DX0 Controller www.yaskawa.eu.com External Drive Axis Packages As a leading developer and manufacturer of servomotors and controllers, YASKAWA is able
AFTERMARKET Exhaust & Emission Technologies
AFTERMARKET Exhaust & Emission Technologies going the extra mile The Dinex Group The Dinex business concept is to develop, manufacture and distribute complete exhaust systems and emission technologies
No.1. Side approach mechanism Precise lateral contacting. Catalogue 1.1. Test Probes Test Fixtures
No.1 in testing solutions in der Prüftechnik Test Probes Test Fixtures Side approach Precise lateral contacting Catalogue 1.1 16 mm, 1 N contact force INGUN for precise lateral contacting -controlled operated
Drive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects
09.2007 / a 4183 en - 03.2008 / b Drive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects www.leroy-somer.com Drive systems
INTRODUCING A 50 Year Journey CONTACT EMEA DENMARK FINLAND GERMANY ITALY NORWAY RUSSIA SOUTH AFRICA AMERICAS USA
TIPPER APPLICATIONS The manufacturing engineering office from the 1950 s The Tool Room from 1947 100 YEARS OF HYDRAULICS EXPERIENCE Hydreco Hydraulics is the designer, manufacturer and distributor of products
VALVES & VALVE ACCESSORIES
Passenger Rubber Snap-In Valve 211412 211413 211414 211415 211418 Prod. Code PASSENGER RUBBER Snapin Valve Packaging Rim hole dia. 211412 T/L VALVE each 11.3 33 - TR412 211413 T/L VALVE each 11.3 43 -
Flex Tube Elbow w/ Marmon or Flare
Aftertreatment Device V-Band Clamp Flex Tube Elbow w/ Marmon or Flare In-Line Aspirator 2 1. Marmon Adaptor 2. Weld and Clamp Connectors 3. Expanders 4. High Performance Flex 5. Elbows 6. SS Straight Tubing
SM Range - a wide range of silencers adapted for all applications :
SM Range - a wide range of silencers adapted for all applications : Adaptability - many configurations available to suit your design requirements Availability - computer aided selection and large stock
Corteco - Automotive Spare Parts in OEM Quality
COMPANY PROFILE Corteco - Automotive Spare Parts in OEM Quality Corteco is the IAM specialist of the Freudenberg Group for seals and vibration technology as well as cabin air filters. Garages benefit from
SAFETY ON THE ROAD. C10 Curtainsider Curtainsider for vehicles with a full side curtain. Ver:1 2018:1 En
SAFETY ON THE ROAD C10 Curtainsider Curtainsider for vehicles with a full side curtain Ver:1 2018:1 En COMPANY Kinnegrip Kinnegrip is a Swedish company that develops, markets, manufactures and supplies
Aggressive Environments SERIES
Aggressive Environments SERIES The need to provide geared motors suitable for use in wet and corrosive environments has led Motovario to design a new product range specific for these fields. These products
Accessory Catalog 2017 Revision: M-ACCS July 2017
www.maximsilencers.com Industrial Silencer, Heat Recovery and Catalytic Specialists Maxim Silencers Accessory Catalog 2017 July 2017 Prices are subject to change without notice. Prices are in U.S. dollars
Flexible metal elements for construction Equipment
The Group With 23 companies in 18 countries Witzenmann is number 1 in the industry worldwide. World leader Witzenmann is a global group of companies that specialises in flexible metal elements. Our company
Aggressive Environments
n Aggressive Environments e w The need to provide geared motors suitable for use in wet and corrosive environments has led Motovario to design a new product range specific for these fields. These products
RHEYFIRM (RTS) R-(N)TSCGEWTOEUS 3x...+3x.../3 3.6/6 kv 20/35 kv adapted to DIN VDE 0250 part 813
REELING CABLE RHEYFIRM (RTS) R-(N)TSCGEWTOEUS 3x...+3x.../3 3.6/6 kv 20/35 kv adapted to DIN VDE 0250 part 813 Contents: Letter code Construction details and voltage-classes Technical data 2016 RHEYFIRM(RTS)
HOW TO SEND E-INVOICES TO CARGOTEC
HOW TO SEND E-INVOICES TO CARGOTEC Basware Corporation Copyright Basware Corporation All rights reserved SUPPLIER KIT 2 (11) Contents 1 Cargotec urges to only use 3 2 Cargotec companies currently receiving
DOUBLE OCTOMILL TM PRODUCT RANGE
DOUBLE OCTOMILL TM PRODUCT RANGE Double Octomill insert selection and cutting data recommendations, see page 6. complete insert programme, see page 7. Tool angles: Jo = -11q Jp = - 8q Jf = - 8q Pitch
a worldwide leading Paint Company established in 1883 Headquarters in Pittsburgh, Pennsylvania, USA
a worldwide leading Paint Company established in 1883 Headquarters in Pittsburgh, Pennsylvania, USA Daimler AG and PPG Partnership A Partnership that adds value by Transfer of PPG s OE competence to the
MOTOMAN SIA-series FS100. Flexible Applications with the SIA-series. Controlled by
MOTOMAN SIA-series Flexible Applications with the SIA-series The SIA-series are small and agile 7-axis robots providing human-like flexibility of movement and fast acceleration. They distinguish themselves
OPPORTUNITY AND CHALLENGES FOR AUTOMOTIVE COMPOSITE APPLICATIONS
OPPORTUNITY AND CHALLENGES FOR AUTOMOTIVE COMPOSITE APPLICATIONS Dr. Hendrik Mainka Engineering & Planning Center - Innovations 1 Volkswagen Group : 12 brands > 335 models 2 Key Figures of the Volkswagen
SAFETY ON THE ROAD. T50 Dropside lock. For light vehicles. Ver:1 2018:1 En
SAFETY ON THE ROAD T50 Dropside lock For light vehicles Ver:1 2018:1 En COMPANY Kinnegrip Kinnegrip is a Swedish company that develops, markets, manufactures and supplies locking systems to transport vehicles
NEW. PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain
NEW PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain A new 7.5 mm-pitch chain has been added to our lineup of plastic modular chains. Features of WT0705-W Plastic Modular Chain Knife-edge conveyor applications
Vent Silencers An Overview
Vent Silencers An Overview www.iac-acoustics.com making Make the world the world a quieter a quieter place place www.iac-acoustics.com Vent silencers Table of contents IAC Acoustics Overview Why choose
Spark arrestor type C
Spark arrestor type C Spark arrestors of type C are especially designed for applications in exhaust systems with high demands regarding explosion risk. The spark arrestors are to be mounted in the flues
LINING WEAR SENSING INSTALLATION INSTRUCTIONS
LINING WEAR SENSING INSTALLATION INSTRUCTIONS 000 700 295 / 01.04 / Redditch Assembly INTRODUCTION EB+ Lining wear is a device that allows multiple lining wear indicatiors (LWI) to be connected to a single
GLOBAL RAIL SOLUTIONS
GLOBAL RAIL SOLUTIONS NORGREN RAILINE FITTINGS ENGINEERINGADVANTAGE >> MEETING GLOBAL CHALLENGES The rail sector is beset by a host of demanding challenges and conditions. But none are as demanding as
Engine Exhaust Silencers A wide range of silencers to address many applications
Engine Exhaust Silencers A wide range of silencers to address many applications IAC Acoustics Making the World a Quieter Place Founded on an unrivalled history of engineering with some of the most pioneering
Rail Hoses. The Hose Range for European Rail Transportation
Rail Hoses The Hose Range for European Rail Transportation INNOVATION AND COMPLIANCE Parker is a certified and well-experienced partner with a global presence for the leading players of the rail industry.
IWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA
IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made of fluororesin.
STAUFF SWG Stud Welding System for STAUFF Clamps
Local Solutions For Individual Customers Worldwide Versatile combination and adaptation options STAUFF SWG Weld Stud developed for efficient assemblies Designed for original STAUFF Pipe, Tube, Hose and
Dinex DiTRAP. Tested and validated CRT replacement programme. going the extra mile
Dinex DiTRAP Tested and validated CRT replacement programme going the extra mile The Technology From engine Inlet module V-Clamp Particulate filter (DPF) Cordierite/SiC an attractive alternative of spare
MOTOMAN GP-series. Handling & General Application. Controlled by YRC
MOTOMAN GP-series Handling & General Application Controlled by YRC1000 www.yaskawa.eu.com MOTOMAN GP-series Robot System Solutions MOTOMAN GP-series Find smart solutions for production site issues with
IWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA
IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made of fluororesin.
RPS Station. Solutions for the North American Solar Market
RPS Station Solutions for the North American Solar Market 2013/2014 Power, control and green solutions 3 RPS Station s RPS Station is a fully integrated photovoltaic power conversion system that is designed
quality industry solutions
quality industry solutions JSG Industrial Systems HOSE, TUBE & CONNECTION FITTINGS CATALOGUE 2017 JSG INDUSTRIAL SYSTEMS Since its inception in 1968, JSG Industrial Systems has been a proud supplier of
LAMINATE. Nordic Soul concept
LAMINATE Nordic Soul concept LAMINATE Nordic Soul concept eaceful and subtle designs for relaxed and serene P environments C lass of use : 32 Total thickness: 8 mm Natural materials and zen simplicity
OUTSTANDING PERFORMANCE
ENGINEERED TO MOVE OUTSTANDING PERFORMANCE ON A GLOBAL SCALE We can demonstrate a proven ability to meet the needs of our customers and to support world leaders in their individual fields. It s not just
Drive solutions for the oil and gas industry.
Drive solutions for the oil and gas industry. maxon Heavy Duty drives: Robust design for extreme operating conditions. Founded in Switzerland. Available worldwide. maxon a strong global brand. maxon motor,
Technical Data Sheet PS , Rev C May Micro Motion R-Series Coriolis Flow and Density Meters
Technical Data Sheet PS-001945, Rev C May 2017 Micro Motion R-Series Coriolis Flow and Density Meters R-Series Coriolis Flow Meters May 2017 Detailed Specifications R-Series accuracy Model Liquid mass
We reduce emissions. We minimize fuel consumption. We enable the drive of tomorrow. Rheinmetall Automotive Company Information
We reduce emissions. We minimize fuel consumption. We enable the drive of tomorrow. Rheinmetall Automotive Company Information Development capabilities As a longstanding development partner of virtually
IGNITION I FILTERS I WIPERS
Dedicated to service. Driven by quality. CHAMPION SPARK PLUGS PART III - TECHNOLOGIES IGNITION I FILTERS I WIPERS Champion is a registered trademark of Federal-Mogul Motorparts. - PRMCM1515-EN CHAMPION
PARTS/CROSS-REFERENCE INFORMATION
PARTS/CROSS-REFERENCE INFORMATION AA1 and S-ABA Brake Adjusters Innovative Vehicle Solutions Important Notice The products described within this literature, including without limitation, product features,
IWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA
IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made of fluororesin.
GLOBAL OPERATIONS. Global manufacturing operations are strategically based where the worlds most influential OEMs exist:
THE FERODO STORY. Undisputed leader in non-asbestos brake pad technology worldwide Established in England in 1897 First company to totally dedicate itself to the design and manufacture of friction materials
EUROPEAN COMMISSION DIRECTORATE-GENERAL FOR ECONOMIC AND FINANCIAL AFFAIRS BUSINESS AND CONSUMER SURVEY RESULTS. August 2011
EUROPEAN COMMISSION DIRECTORATE-GENERAL FOR ECONOMIC AND FINANCIAL AFFAIRS BUSINESS AND CONSUMER SURVEY RESULTS August 2011 Upcoming releases of Business and Consumer Survey results Flash CCI: 22 September,
Installation Guide ELECTRONIC HEIGHT SENSOR.
Installation Guide ELECTRONIC HEIGHT SENSOR www.haldex.com Electronic Height Sensor Introduction Electronic Height Sensor Electronic height sensor enables the EBS to be available for mechanical suspension
TORMAX Automatic Door Systems. TORMAX Landert Motoren AG
TORMAX Automatic Door Systems TORMAX Landert Motoren AG Overview Landert Group Facts General Facts Established 1924 Employees Worldwide 710 - Switzerland 364 (thereof 49 trainees) Worldwide setup Group
MDM. Magnetic drive pumps Magnetic drive process pump resistant to dry run damage. Magnetic drive pumps. series
MDM series Magnetic drive pumps Magnetic drive process pump resistant to dry run damage Magnetic drive pumps The MDM Series of Magnetic drive process pumps have wetted parts made of fluororesin. Patent
The Essentials Architectural Hardware. The Essentials Architectural Hardware. Electronic Locking Systems - DT Lite (Residential Version)
Electronic Locking Systems - DT Lite (Residential Version) Contemporary Door Knobsets DT Lite is an Electronic Identifi cation and Locking System for secure and simple access. The access cards are easy
SCANIA. Body Components and Front & Rear Lighting. Edition 1
SCANIA Body Components and Front & Rear Lighting Edition 1 Introduction Bison Parts are one of the UK fastest growing Commercial Vehicle specialists of steering, suspension and body components. All products
August Photo by Rajarishi Mitra. 1
August 2017 Photo by Rajarishi Mitra. 1 2 Photo by Ron W A growing portfolio that is diverse and scalable. CANADA NETHERLANDS GERMANY ESTONIA POLAND CZECH REPUBLIC HUNGARY FINLAND LITHUANIA RUSSIA SLOVAKIA
FHA-C Mini Servo Actuators with Multi-turn Absolute Encoder
FHA-C Mini Servo Actuators with Multi-turn Absolute Encoder Robotics and Automation Machine tools Semiconductor technology Medical Packaging machines Special environments Our inspiration Your business
INSTALLATION GUIDE. Safe Parking. Innovative Vehicle Solutions
INSTALLATION GUIDE Safe Parking Innovative Vehicle Solutions TEM Safe Parking Installation Table of contents Use 3 Method of Operation 3 Fitting guidelines 4 Maintenance 4 Technical data 5 Versions 5 Check
Tracks TSL600SD/TSL1000SD/ TSL2000SD/TSL4000SD DX200. for MOTOMAN Robots with DX200 Controller. Controlled by.
Tracks TSL600SD/TS000SD/ TS000SD/TSL4000SD for MOTOMAN Robots with Controller Controlled by www.yaskawa.eu.com TSL tracks Properties YASKAWA TSL series tracks extend the working range of MOTOMAN robots
Exhaust pipe systems. Off-road vehicles Special vehicles Agricultural vehicles Buses & coaches Construction machinery Power generators
Exhaust pipe systems Off-road vehicles Special vehicles Agricultural vehicles Buses & coaches Construction machinery Power generators Military vehicles Mobile air units Trains Industrial applications Sea
MOTOMAN Service Contracts
MOTOMAN Service Contracts M O T O M A N Discount on Training M O T O M A N Expanded Hotline S E R V Discount on Maintenance S E R V I C E Discount on Spare Parts MSC I C E C O N T R A C T S Discount on
Chapter 1 Pipes and fittings PVC - PE
Chapter 1 Pipes and fittings PVC - PE Solvent weld fittings Threaded connections Ball valves & butterfly valves Page 1-20 Page 21-33 Page 34-37 Slide valves & check valves Solvents & sealants Tools Page
Market Information Database. Databook
Market Information Database Databook Garage Structure in the European Car Aftermarket 2017 IMPRINT RESPONSIBLE: HELMUT WOLK, ZORAN NIKOLIC, TATYANA SERGEYCHIK, DAVID BRUDER, SYBILLE MENDE COPYRIGHT: WOLK
AGRIDUR The Power Transmission Belt Series for Ultimate Requirements in Agricultural Machines
AGRIDUR The Power Transmission Belt Series for Ultimate Requirements in Agricultural Machines Power Transmission Group Power Transmission Group 2 ContiTech Power Transmission Group The ContiTech Power
TE S RAYCHEM RSTI-CC-58 SCREENED, SEPARABLE COUPLING SYSTEM
Industry photo: should be a the same image as larger industry photo. Either a different crop or different angle. industry photo. This image and the one above should be different versions of the same photo
application guide axial condensing units
application guide axial condensing units 17 English/07-2006 Congratulations you have made a wise choice and we feel sure that it will meet your expectations WARNING: Read this manual before installation,
Armaturenwerk Hötensleben GmbH. AWH-Connect
Armaturenwerk Hötensleben GmbH The aseptic Connection for Vessels "A must for clean Vessels " is the aseptic and hygienic connection for your vessels. It was developed for the strict requirements of the
Product Catalogue ARMONIA Providing indoor climate comfort
Product Catalogue ARMONIA Providing indoor climate comfort ARMONIA 1,3-11 kw Water cassette Main applications Light commercial buildings Offi ces Shops General description Why this choice? Silent operation
About Tapflo. Tapflo - your reliable pumpchoice. Tapflo quality. The history of Tapflo
About Tapflo Tapflo - your reliable pumpchoice With experience from industrial fluid handling and pump manufacture since 1970, we know what you as a customer require from an industrial pump. Ever since
ROOFMASTER STEF-ATEX ROOF FAN
Air Comfort Air movement Roof fans ROOFMASTER STEF-ATEX ROOF FAN» Technical CATALOGuE 2 STEF-ATEX Roofmaster - Technical Catalogue Contents General description Application/specification... 3 Features...
EHP2 Stainless steel piston accumulator
The Professional Choice in Fluid Management EHP2 Stainless steel piston accumulator 2 OILTECH EHP2 STAINLESS STEEL PISTON ACCUMULATOR Oiltech, a member of the Olaer Group, and a global player specialising
CATALOGUE. Metzerplas
CATALOGUE Metzerplas C E R T I F I C A T I O N 3 SP pipe is approved by standards institutes around the world Institute Certificate No. Product Standard Country IAPMO 4755 Pex-Al-Pex Composite pressure
Spare part list DEPA Air Operated Diaphragm Pumps L
: DL25-80-SUV/UEV Drawing-No.: 1300-1014 25.01 Air valve, internal 25-40 All 1 2501053-- 50.01 Air valve, internal 50-80 All 1 5001052-- 25.01V Air valve, internal, nickel plated 25-40 All 1 250105399
electric drive solutions
electric drive solutions the power of e-motion Drive solutions made in Germany Schabmüller has been supplying the world with highly advanced electrical drive solutions since 1924. We develop, design and
Product Overview. Application
Self-Regulating SC, SC/H Series-resistance heating cables for longline systems Electrical freeze protection for long pipelines in both nonhazardous and hazardous locations Power-Limiting Mineral Insulated
Max. flow capacity of 5,000 L/min and max. discharge head of 98m. The world s largest class fluoroplastic magnetic drive pump.
MDW series Magnetic drive pumps Max. flow capacity of 5,000 L/min and max. discharge head of 98m. The world s largest class fluoroplastic magnetic drive pump. The MDW series are the largest class fluoroplastic
The Nonnenmann Group
The Nonnenmann Group Nonnenmann GmbH was founded by Paul and Gudrun Nonnenmann in 1989. This company is the center for the Nonnenmann Group and all global activities. With presently over 35 employees,
Automotive Aftermarket Giorgio Brusco
Automotive Aftermarket Giorgio Brusco Vice President Automotive Aftermarket Europe Agenda The global business today Recent progress in automotive Future growth drivers Summary 2 Worldwide Automotive Aftermarket:
Wobble Sticks Precise Manual Sample Transfer
Wobble Sticks Precise Manual Sample Transfer The UHV Design wobble stick range offers ultimate versatility for your bespoke applications. Our slimline modular concept benefits from UHV Design s cutting-edge
Beef Markets Outlook. January Mark Zieg. Growing the success of Irish food & horticulture. Growing the success of Irish food & horticulture
Beef Markets Outlook January 213 Mark Zieg AIDAN COTTER CHIEF EXECUTIVE BORD BIA 28 JANUARY 29 Irish Beef Markets Exports 444, Export Volumes by Destination (212) UK 231, Spain 11, France 46, Holland 36,
NI PS-15/16/17 Side Mount Brackets
INSTALLATION GUIDE NI PS-15/16/17 Side Mount Brackets This document provides the installation procedure for the NI PS-15/16/17 Side Mount Brackets. This accessory is used to mount NI PS-15/16/17 power
Any reference to OEM names or OEM product identification numbers/descriptions/pictures/model numbers is for identification only and does not indicate
135 EXHAUST COMPONENTS Chrome stack, curved style Dia Length Intel Material F247701 4 18 4 I.D. Chrome F247702 4 36 4 I.D. Chrome F247703 4 78 4 I.D. Chrome F247704 5 18 5 I.D. Chrome F247705 5 36 5 I.D.
Caledonian. Caledonian Offshore & Marine Cables. BS 6883 STANDARD (Flame Retardant) BS 7917 STANDARD (Fire Resisitant)
Caledonian Caledonian Offshore & Marine Cables BS 6883 STANDARD (Flame Retardant) BS 7917 STANDARD (Fire Resisitant) Caledonian, established in 1978, offers one of the most complete lines of fiber and
Made to run. Delta V-belts. The new standard in standard V-belts
Made to run Delta V-belts The new standard in standard V-belts 2 Looking for a V-belt fit for your specific needs? Every chance we will have it! You know Gates as the global engineering leader in Power
Model DW Series Positive Pressure Guidelines for Engine Exhaust Systems
1 Model DW Series Positive Pressure Guidelines for Engine Exhaust Systems UL Listed under Standard 103 for Flue Gas Temperatures up to 1400 F (759 C) Venting System for Factory-Built Chimneys For Building
A E R Z E N S C R E W C O M P R E S S O R S
A E R Z E N S C R E W C O M P R E S S O R S New Aerzen Screw Compressor Units Delta Screw Generation 5 Intake volume flows from 270 m³/h up to 2.600 m³/h A E R Z E N E R M A S C H I N E N F A B R I K G
ABB AG - EPDS. Vacuum interrupters
ABB AG - EPDS Vacuum interrupters Over 30 years of experience in vacuum technology Worldwide more then 5 million ABB vacuum interrupters in service Latest technologies for high quality mass-production
IWAKI MAGNETIC DRIVE PUMPS MDM. Patent & Pat.Pend. JAPAN / U.S.A. / EU / CHINA / TAIWAN
IWAKI MAGNETIC DRIVE PUMPS Patent & Pat.Pend. JAPAN / U.S.A. / EU / CHINA / TAIWAN Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made
AIR RIDE SUSPENSION SYSTEMS
AIR RIDE SUSPENSION SYSTEMS Solenoid Valves (Fast Valves) Valve Manifold Systems Pressure Switches Filters (Water Traps) Air Bellows & Fittings www.asconumatics.com 1 ASCO Numatics Air Ride Components
Exhaust and Metal Products
EMISSION TECHNOLOG IES Exhaust Group Exhaust and Metal Products Full Range of Products from the Frame to the Tail Pipe www.catalyticcombustion.com 888-285-5940 Welcome to Catalytic Combustion Corporation,
OSET 12.5'' Eco 24V 600W 2017
OSET.'' Eco V 600W 07 Part Number: See Table Version:.0 Description Bike P/N Charger P/N. Eco UK SPD07-UK ELE09. Eco Europe SPD07-EU ELE077. Eco USA SPD07-US ELE07. Eco Australia SPD07-AU ELE0707. Eco
100 SERIES & 120 SERIES HOSE
INTRODUCTION MSA Stealth is the new way in performance plumbing. Its strong, lightweight and full-flow design leaves the competition behind. MSA Stealth has a large range of fittings, filters, tools and
Transit System Components L20700W 10/11. Bus Door Catalog
Transit System Components L20700W 10/11 Bus Door Catalog Greater Strength and Durability - The Haldex Touchbar Device - Designed for All Types of Pneumatic And Electric Bus Door Systems. The Haldex Touchbar
Caledonian Fire Resistant Optic Fiber Cables
Fire Resistant Optic Cables Fire resistant Central Loose Optic cables Application These cables are characterized by light weight and small diameter, suitable for both aerial and duct installation. They
specified to fit your environment
specified to fit your environment An Engineering solution provider offering advanced silicone and organic rubber products, for a wide range of diverse applications. Decades of experience and expertise
MOTOMAN SDA-series FS100. Flexible Applications with the SDA-series. Controlled by
MOTOMN SD-series Flexible pplications with the SD-series The SD-series are slim an agile 15-axis dual-arm robots providing human-like flexibility of movement and fast acceleration. They distinguish themselves
June 2014 Euro area unemployment rate at 11.5% EU28 at 10.2%
STAT/14/121 31 July 2014 June 2014 Euro area unemployment rate at 11.5% EU28 at 10.2% The euro area 1 (EA18) seasonally-adjusted 2 unemployment rate 3 was 11.5% in June 2014, down from 11.6% in May 2014
AUTOMOTIVE HOSE G611 FUEL LINE. Tube: Smooth, black, oil and gasoline resistant nitrile rubber.
& Truck HOSE 8 AUTOMOTIVE HOSE Gasoline & diesel hose for fuel tanks & filler necks can be found in Marine Section Fuel Line hose is specially compounded to withstand the high under-the-hood temperatures
F-SERIES COMPACT WHEEL LOADERS PERFECT IN EVERY MISSION
F-SERIES COMPACT WHEEL LOADERS PERFECT IN EVERY MISSION F-SERIES COMPACT WHEEL LOADERS CASE, MORE THAN 170 YEARS OF INNOVATION A long history of industry fi rsts 1842: Case is founded. 1869: First Case