Technical Data Sheet PS , Rev C May Micro Motion R-Series Coriolis Flow and Density Meters
|
|
|
- Cora Gallagher
- 5 years ago
- Views:
Transcription
1 Technical Data Sheet PS , Rev C May 2017 Micro Motion R-Series Coriolis Flow and Density Meters
2 R-Series Coriolis Flow Meters May 2017 Detailed Specifications R-Series accuracy Model Liquid mass flow accuracy Gas mass flow accuracy Density accuracy (g/cm 3 ) 0.50% 0.40% 0.75% R025 R050 R100 R200 Flow tube information Model Number of tubes Tube inside diameter es Tube inside diameter mm Tube lengthes Tube lengthmm R R R R SME B16.5 specification flange compatibility Model 1/2 3/ /2 2 3 R025 R050 R100 R200 DIN specification flange compatibility Model DN15 DN25 DN40 DN50 R025 R050 R100 R200 EN specification flange compatibility Model DN15 DN25 DN40 DN50 R025 R050 R
3 May 2017 R-Series Coriolis Flow Meters Model DN15 DN25 DN40 DN50 R200 JIS B 2220 specifciation flange compatibility Note Sensors with JIS process connections do not meet SME B31.1 power piping code. Model 15mm 25mm 40mm 50mm R025 R050 R100 R200 VCO/VCR specification flange compatibility and Tri-clamp compatible flanges VCO specification Tri-clamp compatible Model #4 #8 #12 #16 1/2 3/ /2 2 R025 R050 R100 R200 Transmitter compatibility Transmitter model Sensor model 1500/ / Series ll R-Series models 3
4 R-Series Coriolis Flow Meters May 2017 Process pressure ratings Sensor maximum working pressure reflects the highest possible pressure rating for a given sensor. Process connection type and environmental and process fluid temperatures may reduce the maximum rating. Refer to the Technical Data Sheet for common sensor and fitting combinations. ll sensors comply with SME B31.3 process piping code and Council Directive 97/23/EC of 29 May 1997 on pressure equipment. Note R-Series sensors with JIS process connections do not comply with SME B31.1 power piping code. Sensor maximum working pressure for all models: 316L stainless steel (S) and high pressure (P) Model psig barg ll stainless steel models (R025S R200S) 1, R025P 2, Temperature and pressure de-ratings Note The ratings in this section apply to the combined sensor and process connection to ensure that the meter does not exceed the limits of either component. The temperature and pressure de-ratings graphs do not represent all possible model and fitting combinations. For combinations not listed here, contact a sales representative or the factory. SME B16.5 (CL150-CL600) CL CL CL B. Pressure (psi) B. Temperature ( F) 4
5 May 2017 R-Series Coriolis Flow Meters SME B16.5 (CL900-CL2500) CL900/ : R025P CL900/ : R200S CL900/1500: R050S CL900/ : R025S, R100S B. Pressure (psi) B. Temperature ( F) DIN 2635 & F316/F316L PN100: R200S (DIN 2637) PN40: R025S-R200S, DN40 (DIN 2635 & DIN11851) PN25: R200S, DN50 (DIN 11851) B. Pressure (Bar) B. Temperature ( C) 5
6 R-Series Coriolis Flow Meters May 2017 DIN 2638 F316/F316L PN100/160: R025P PN100: R200S PN100/160: R025S-R100S B. Pressure (Bar) B. Temperature ( C) EN F316/F316L PN100/160: R025P PN100/160: R050S PN100: R025S-R200S, R025P PN40: R025S-R200S Pressure (Bar) B. Temperature ( C) B 6
7 May 2017 R-Series Coriolis Flow Meters JIS B 2220 F316/F316L K: R025S-R200S K: R025S-R200S K: R200S B. Pressure (Bar) B. Temperature ( C) Note Sensors with JIS process connections do not comply with SME B31.1 power piping code. Tri-Clamp compatible 316L R050S R025S, R100S R200S B. Pressure (psi) B. Temperature ( F) 7
8 R-Series Coriolis Flow Meters May 2017 VCO & VCR 316/316L Pressure (psi) B. Temperature ( F) R050S R025S, R100S B Hazardous area classifications Detailed classifications Note ll information and approvals may change depending on sensor/transmitter configurations and operating conditions. Please reference appropriate certificates for exact approvals. CS and CS C-US Sensor with integrally mounted Model 1700/2700 transmitter or with core processor IECEx and NEPSI Sensor with integrally mounted Model 1700/2700 transmitter or with core processor Sensor with Model 1700/2700 with THUM adapter TEX mbient temperature: 40 to +140 F ( 40 to +60 C) Class I, Div. 1, Groups C and DClass I, Div. 2, Groups, B, C, and DClass II, Div. 1, Groups E, F, and G Class I, Div. 2, Groups, B, C, and D Class II, Div. 1, Groups E, F, and G Ex ib IIC T1 T5 Gb Ex ib IIC T1 T4 8
9 May 2017 R-Series Coriolis Flow Meters ll models (CIC 2) with core processor or Model 1700/2700 transmitter (1) For ambient and process temperature limits, refer to the appropriate approval certificate. II 2G Ex ib IIC T1 T5 Gb II 2D Ex ib IIIC T C (1) Db IP65 Process connections Note The tables in this section do not represent all possible model and flange combinations. For combinations not listed here, contact a sales representative or the factory. Dimensions with process connections Dimension is provided for each process fitting type, when available. It is the finished face-to-face dimension of the sensor with the process connection ±1/8 (±3 mm). Weight with process connections Product weights in this section include the weight of the sensor with the process connection and integral core processor, except where noted. Values are rounded to ±1 lb (0.5 kg). Contact the factory for product shipping weight. Fitting options Model R025S Code 113 1/ /2- Description Dim (mm) CL150 SME B16.5 F316/F316L Weld neck flange Raised face 16.0 (406) CL300 SME B16.5 F316/F316L Weld neck flange Raised face 16.4 (416) Weight lb (kg) 14 (6.5) 15 (7) 9
10 R-Series Coriolis Flow Meters May 2017 Code 115 1/2- Description Dim (mm) CL600 SME B16.5 F316/F316L Weld neck flange Raised face 16.9 (428) 116 DN15 PN40 DIN 2635 F316/F316L Weld neck flange Form C face 15.3 (387) 120 DN15 PN100/ /2- DIN 2638 F316/F316L Weld neck flange Form E face 15.8 (401) Tri-Clamp compatible 316L Hygienic fitting 14.0 (355) mm 20K JIS B 2220 F316/316L Weld neck flange Raised face 15.4 (392) 170 DN15 PN100/ 160 EN F316/F316L Weld neck flange Type B (391) 172 DN25 PN40 EN F316/F316L Weld neck flange Type B (387) 176 DN15 PN40 EN F316/F316L Weld neck flange Type B (387) 178 DN15 PN100 EN F316/F316L Weld neck flange Type D 15.4 (391) 183 DN25 PN40 EN F316/F316L Weld neck flange Type D 13.9 (353) mm 40K JIS B 2220 F316/316L Weld neck flange Raised face 16.5 (419) 222 DN15 DIN /316L Hygienic coupling 15.3 (387) 310 DN15 PN40 EN F316/F316L Weld neck flange Type D 14.0 (355) 319 #8 VCO 316/316L Swagelok compatible fitting 1/2- NPT female adapter (1) Dimension specified in table does NOT include fitting length. For installation, modify Dim. value to include fitting. Model R025P Code Description 120 DN15 PN100/ DN15 PN100/ 160 Weight lb (kg) 16 (7) 15 (7) 17 (8) 12 (5.5) 15 (7) 17 (8) 17 (8) 15 (7) 17 (7.5) 17 (8) 19 (9) 12 (5.5) 15 (7) (5.5) (401) (1) Dim (mm) DIN 2638 F316/F316L Weld neck flange Type E face 15.8 (401) EN F316/F316L Weld neck flange Form B (401) 178 DN15 PN100 EN F316/F316L Weld neck flange Form D 15.8 (401) 180 DN25 PN100 EN F316/F316L Weld neck flange Form B (427) 319 #8 VCO 316/316L Swagelok compatible fitting 1/2- NPT female adapter (1) Dimension specified in table does NOT include fitting length. For installation, modify Dim. value to include fitting. Weight lb (kg) 17 (8) 17 (8) 17 (7.5) 24 (10.5) (5.5) (355) (1) 10
11 May 2017 R-Series Coriolis Flow Meters Model R050S Code 113 1/ / /2- Description Dim (mm) CL150 SME B16.5 F316/F316L Weld neck flange Raised face 18.1 (460) CL300 SME B16.5 F316/F316L Weld neck flange Raised face 18.5 (469) CL600 SME B16.5 F316/F316L Weld neck flange Raised face 19.0 (482) 116 DN15 PN40 DIN 2635 F316/F316L Weld neck flange Form C face 17.4 (441) 120 DN15 PN100/ 160 DIN 2638 F316/F316L Weld neck flange Form E face 17.9 (455) mm 20K JIS B 2220 F316/316L Weld neck flange Raised face 17.6 (446) 131 DN25 PN40 DIN 2635 F316/F316L Weld neck flange Form C face 17.5 (444) 170 DN15 PN100/ 160 EN F316/F316L Weld neck flange Type B (455) 172 DN25 PN40 EN F316/F316L Weld neck flange Type B (445) 176 DN15 PN40 EN F316/F316L Weld neck flange Type B (441) 178 DN15 PN100 EN F316/F316L Weld neck flange Type D 17.9 (455) 183 DN25 PN40 EN F316/F316L Weld neck flange Type D 17.5 (445) mm 40K JIS B 2220 F316/316L Weld neck flange Raised face 18.6 (473) 222 DN15 DIN /316L Hygienic coupling 16.0 (407) 239 #12 VCO 316/316L Swagelok compatible fitting 3/4- NPT female adapter 16.4 (415) 310 DN15 PN40 EN F316/F316L Weld neck flange Type D 17.4 (441) 322 3/4- Tri-Clamp compatible 316L Hygienic fitting 15.9 (403) Weight lb (kg) 15 (7) 16 (7.5) 17 (7.5) 16 (7.5) 18 (8.5) 18 (8) 18 (8.5) 18 (8.5) 18 (8.5) 16 (7.5) 18 (8) 18 (8.5) 19 (9) 13 (6) 14 (6) 16 (7.5) 13 (6) Model R100S Code Description Dim (mm) CL150 SME B16.5 F316/F316L Weld neck flange Raised face 22.7 (576) CL300 SME B16.5 F316/F316L Weld neck flange Raised face 23.2 (588) CL600 SME B16.5 F316/F316L Weld neck flange Raised face 23.7 (601) Weight lb (kg) 24 (11) 27 (12) 27 (12.5) 11
12 R-Series Coriolis Flow Meters May 2017 Code Description Dim (mm) 131 DN25 PN40 DIN 2635 F316/F316L Weld neck flange Form C face 21.4 (544) 137 DN25 PN100/ Tri-Clamp compatible DIN 2638 F316/F316L Weld neck flange Form E face 22.8 (580) 316L Hygienic fitting mm 20K JIS B 2220 F316/F316L Weld neck flange Raised face 179 DN25 PN40 EN F316/F316L Weld neck flange Type B (544) 180 DN25 PN100 EN F316/F316L Weld neck flange Type B (580) 181 DN25 PN100 EN F316/F316L Weld neck flange Type D 22.9 (580) mm 40K JIS B 2220 F316/316L Weld neck flange Raised face 22.9 (582) 230 DN25 DIN /316L Hygienic coupling 20.6 (522) 311 DN25 PN40 EN F316/F316L Weld neck flange Type D 21.4 (544) Weight lb (kg) 25 (11.5) 31 (14) 25 (11.5) 31 (14) 31 (14) 31 (14) 20 (9) 25 (11.5) Model R200S Code Description Dim (mm) 312 DN40 PN40 EN F316/F316L Weld neck flange Type D 23.4 (595) 316 DN50 PN40 EN F316/F316L Weld neck flange Type D 23.7 (601) / / / /2- CL150 SME B16.5 F316/F316L Weld neck flange Raised face 24.8 (629) CL300 SME B16.5 F316/F316L Weld neck flange Raised face 25.3 (642) CL600 SME B16.5 F316/F316L Weld neck flange Raised face 25.8 (654) Tri-Clamp compatible Tri-Clamp compatible 316L Hygienic fitting 23.3 (591) 316L Hygienic fitting 22.9 (581) 353 DN40 DIN /316L Hygienic coupling 23.2 (589) 363 DN40 PN100 EN F316/F316L Weld neck flange Type B (629) 365 DN50 PN100 EN F316/F316L Weld neck flange Type B (641) 366 DN40 PN100 EN F316/F316L Weld neck flange Type D 24.8 (629) Weight lb (kg) 48 (21.5) 51 (23) 46 (21) 52 (23.5) 55 (25) 39 (17.5) 39 (18) 46 (21) 56 (25.5) 64 (29) 56 (25.5) 12
13 May 2017 R-Series Coriolis Flow Meters Code Description Dim (mm) 367 DN50 PN100 EN F316/F316L Weld neck flange Type D 25.3 (641) 368 DN40 PN40 EN F316/F316L Weld neck flange Type B (595) 369 DN50 PN40 EN F316/F316L Weld neck flange Type B (601) 378 DN50 PN100 DIN 2637 F316/F316L Weld neck flange Form E face 25.4 (646) 381 DN40 PN40 DIN 2635 F316/F316L Weld neck flange Form C face 23.6 (599) 382 DN50 PN40 DIN 2635 F316/F316L Weld neck flange Form C face 23.8 (605) mm 10K JIS B 2220 F316/F316L Weld neck flange Raised face 23.4 (595) mm 10K JIS B 2220 F316/316L Weld neck flange Raised face 23.7 (602) mm 20K JIS B 2220 F316/F316L Weld neck flange Raised face 23.4 (595) mm 20K JIS B 2220 F316/316L Weld neck flange Raised face 23.7 (602) CL150 SME B16.5 F316/F316L Weld neck flange Raised face 24.9 (632) CL300 SME B16.5 F316/F316L Weld neck flange Raised face 25.4 (645) CL600 SME B16.5 F316/F316L Weld neck flange Raised face 26.1 (664) Weight lb (kg) 64 (29) 48 (21.5) 51 (23) 64 (29) 48 (21.5) 51 (23) 46 (21) 48 (22) 47 (21) 48 (22) 50 (22.5) 54 (24.5) 58 (26) 13
14 R-Series Coriolis Flow Meters May
15 May 2017 R-Series Coriolis Flow Meters 15
16 R-Series Coriolis Flow Meters PS , Rev C Technical Data Sheet May 2017 Emerson utomation Solutions Micro Motion mericas Worldwide Headquarters 7070 Wester Circle Boulder, Colorado T: T: F: Mexico: rgentina: Brazil: Chile: Emerson utomation Solutions Micro Motion Europe/Middle East Central Europe: Eastern Europe: Dubai: bu Dhabi: France: Germany: +49 (0) Italy: The Netherlands: +31 (0) Belgium: Spain: U.K.: Russian/CIS: Emerson utomation Solutions Micro Motion sia Pacific ustralia: (61) China: (86) India: (91) Japan: (81) South Korea: (82) Singapore: (65) Micro Motion, Inc. ll rights reserved. The Emerson logo is a trademark and service mark of Emerson Electric Co. Micro Motion, ELITE, ProLink, MVD and MVD Direct Connect marks are marks of one of the Emerson utomation Solutions family of companies. ll other marks are property of their respective owners.
Micro Motion Model CNG050 Compressed Natural Gas Flowmeters
Product Data Sheet PS-00408, Rev. C February 2008 Micro Motion Model CNG050 Compressed Natural Gas Flowmeters Micro Motion Model CNG050 meters are specifically designed for the CNG industry to meet the
Micro Motion F-Series Coriolis Flow and Density Meters
Product Data Sheet PS-00629, Rev. E May 2007 Micro Motion F-Series Coriolis Flow and Density Meters Micro Motion F-Series Coriolis meters offer highly accurate mass flow, volume flow, and density measurement
Micro Motion Model D and DL Coriolis Flow and Density Meters
Product Data Sheet PS-00388, Rev. F April 2013 Micro Motion Model D and DL Coriolis Flow and Density Meters Micro Motion Model D and DL sensors provide flow and density measurement for liquids, gases,
Micro Motion ELITE High Capacity Coriolis Flow and Density Meters
Product Data Sheet PS-001041, Rev. L April 2013 Micro Motion ELITE High Capacity Coriolis Flow and Density Meters Micro Motion ELITE High Capacity Coriolis meters offer unparalleled flow and density measurement
Micro Motion F-Series Coriolis Flow and Density Meters
Product Data Sheet PS-00603, Rev. F December 2007 Micro Motion F-Series Coriolis Flow and Density Meters Micro Motion F-Series Coriolis meters offer highly accurate mass flow, volume flow, and density
Micro Motion R-Series Coriolis Flow and Density Meters
Micro Motion R-Series Coriolis Flow and Density Meters Product Data Sheet PS-00363, Rev N June 2018 Multi-variable flow and density measurement Basic liquid mass flow, volume flow, and density measurement
Micro Motion T-Series Coriolis Flow and Density Meters
Micro Motion T-Series Coriolis Flow and Density Meters Product Data Sheet PS-00371, Rev K April 2018 Superior flow measurement in a single straight tube flow meter Built-in balance bar provides the best
Micro Motion Model CNG050 Compressed Natural Gas Flowmeters
Product Data Sheet PS-00408, Rev. D April 2011 Micro Motion Model CNG050 Compressed Natural Gas Flowmeters Micro Motion Model CNG050 meters are specifically designed for the CNG industry to meet the challenges
Micro Motion ELITE High Capacity Coriolis Flow and Density Meters
Product Data Sheet PS-001041, Rev. F February 2010 Micro Motion ELITE High Capacity Coriolis Flow and Density Meters Micro Motion ELITE High Capacity Coriolis meters offer unparalleled flow and density
REVOLUTIONIZE YOUR GAS DENSITY AND PURITY MEASUREMENT TECHNOLOGY
REVOLUTIONIZE YOUR GAS DENSITY AND PURITY MEASUREMENT TECHNOLOGY Micro Motion Gas Density Meter INTRODUCING EMERSON S MICRO MOTION GAS DENSITY METER Our Gas Density Meter (GDM) delivers fast-response online
Micro Motion T-Series Straight-Tube Mass Flow and Density Meters. Product Data Sheet PS July 2001
Micro Motion T-Series Straight-Tube Mass Flow and Density Meters Product Data Sheet PS-00371 July 2001 Micro Motion T-Series Straight-Tube Meters Micro Motion is proud to offer you the first single-straight-tube
Micro Motion F-Series Flow and Density Meters
Product Data Sheet PS-00603, Rev AB January 2019 Micro Motion F-Series Flow and Density Meters High accuracy real world performance Best-in-class performance on liquid mass flow, volume flow, and density
Micro Motion ELITE Coriolis Flow and Density Meters
Micro Motion ELITE Coriolis Flow and Density Meters Product Data Sheet PS-00374, Rev V April 2013 Ultimate real world performance Unchallengeable ELITE performance on liquid mass flow, volume flow, and
Micro Motion F-Series Flow and Density Meters
Micro Motion F-Series Flow and Density Meters Product Data Sheet PS-00603, Rev Z December 2017 High accuracy real world performance Best-in-class performance on liquid mass flow, volume flow, and density
Micro Motion ELITE Coriolis Flow and Density Meters
Micro Motion ELITE Coriolis Flow and Density Meters Product Data Sheet PS-00374, Rev AH December 2018 Ultimate real world performance Unchallengeable ELITE performance on liquid mass flow, volume flow,
Micro Motion ELITE Coriolis Flow and Density Meters
Micro Motion ELITE Coriolis Flow and Density Meters Product Data Sheet PS-00374, Rev AG June 2018 Ultimate real world performance Unchallengeable ELITE performance on liquid mass flow, volume flow, and
Micro Motion ELITE Coriolis Flow and Density Meters
Micro Motion ELITE Coriolis Flow and Density Meters Product Data Sheet PS-00374, Rev AE July 2017 Ultimate real world performance Unchallengeable ELITE performance on liquid mass flow, volume flow, and
Micro Motion ELITE Mass Flow and Density Meters
Product Data Sheet PS 00374, Rev. A July 2003 Micro Motion ELITE Mass Flow and Density Meters Available with MVD Technology! TM Micro Motion Micro Motion ELITE mass flow and density meters Experience the
REVOLUTIONIZE YOUR DENSITY AND CONCENTRATION MEASUREMENT TECHNOLOGY
REVOLUTIONIZE YOUR DENSITY AND CONCENTRATION MEASUREMENT TECHNOLOGY Micro Motion Fork Density Meter INTRODUCING EMERSON S MICRO MOTION FORK DENSITY METER Our Fork Density Meter (FDM) delivers accurate
Micro Motion 7827 Digital Viscosity Meter
Product Data Sheet PS-001217, Rev. C April 2013 Micro Motion 7827 Digital Viscosity Meter Micro Motion viscosity meters are built to tackle the most demanding process and control applications. Rugged and
Micro Motion F-Series Coriolis Flow and Density Sensors. Installation Manual , Rev CC December 2010
Micro Motion F-Series Coriolis Flow and Density Sensors Installation Manual 20002298, Rev CC December 2010 Safety and approval information This Micro Motion product complies with all applicable European
Micro Motion 7829 Viscomaster Series Accessories
Product Data Sheet PS-001222, Rev. C pril 2013 Micro Motion 7829 Viscomaster Series ccessories Micro Motion 7829 Viscomaster viscosity meters are built to tackle the most demanding marine and power applications.
Now available with MVD Technology! ELITE Mass Flow and Density Meters
Product Data Sheet PS-00374 July 2001 Now available with MVD Technology! ELITE Mass Flow and Density Meters Micro Motion ELITE Meters Experience the most accurate Coriolis meters available today. Micro
Product Data Sheet PS February Model D and DT. Mass Flow and Density Sensors.
Product Data Sheet PS 00388 February 2002 Model D and DT Mass Flow and Density Sensors www.micromotion.com Model D and DT sensors Micro Motion Model D sensors set the standard for Coriolis flowmeters nearly
Micro Motion F-Series Coriolis Flow and Density Sensors. Installation Manual , Rev CF January 2018
Micro Motion F-Series Coriolis Flow and Density Sensors Installation Manual 20002298, Rev CF January 2018 Safety and approval information This Micro Motion product complies with all applicable European
Micro Motion. CMF400 Sensor. Installation Instructions. Quick Reference Guide P/N , Rev. D May 2003
Quick Reference Guide P/N 3006075, Rev. D May 2003 Micro Motion CMF400 Sensor Installation Instructions For online technical support, use the EXPERT 2 system at www.expert2.com. To speak to a customer
Installation Manual , Rev CG January Micro Motion F-Series Coriolis Flow and Density Sensors
20002298, Rev CG January 2019 Micro Motion F-Series Coriolis Flow and Density Sensors Safety and approval information This Micro Motion product complies with all applicable European directives when properly
Micro Motion ELITE Mass Flow and Density Meters
Product Data Sheet PS 00375 March 2002 Micro Motion ELITE Mass Flow and Density Meters Now available with MVD Technology! www.micromotion.com Micro Motion ELITE Meters Experience the most accurate Coriolis
Installation Manual , Rev DL July Micro Motion ELITE Coriolis Flow and Density Sensors
Installation Manual 20002158, Rev DL July 2017 Micro Motion ELITE Coriolis Flow and Density Sensors Safety and approval information This Micro Motion product complies with all applicable European directives
Installation Manual , Rev DD April Micro Motion ELITE Coriolis Flow and Density Sensors
Installation Manual 20002158, Rev DD April 2012 Micro Motion ELITE Coriolis Flow and Density Sensors Safety and approval information This Micro Motion product complies with all applicable European directives
Micro Motion Insertion Density and Viscosity Meter Accessories
Product Data Sheet PS-001057, Rev. F pril 2013 Micro Motion Insertion Density and Viscosity Meter ccessories Micro Motion insertion density and viscosity meters are built to tackle the most demanding process
OPTIGAS 4010C Technical Datasheet
OPTIGAS 4010C Technical Datasheet Sensor for gas dispenser applications Compact design for easy istallation High accuracy with wide measuring range Designed to fit existing dispensers The documentation
OPTIGAS 4010C Technical Datasheet
OPTIGAS 4010C Technical Datasheet Sensor for gas dispenser applications Compact design for easy istallation High accuracy with wide measuring range Designed to fit existing dispensers The documentation
Installation Manual P/N , Rev. DA June Micro Motion ELITE Coriolis Flow and Density Sensors
Installation Manual P/N 20002158, Rev. D June 2009 Micro Motion ELITE oriolis Flow and Density Sensors Planning Mounting Wiring Grounding Safety and pproval Information This Micro Motion product complies
Flow Measurement SITRANS F C
Overview Benefits It is compact and light, fitting neatly into dense piping arrangements Effective separation of measurement from plant vibration Reliable measurements due to high signal to noise ratio
7000 Series OPTIMASS Mass Flowmeters. Titanium Hastelloy Stainless Steel
KROHNE 04/2004 7.02445.24.00 GR 7000 Series OPTIMASS Mass Flowmeters with single straight measuring tube Titanium Hastelloy Stainless Steel Status: 10/99 Status: 10/99 One tube no limits No limits with
VersaFlow Coriolis 100 Mass Flow Sensor Specifications
VersaFlow Coriolis 100 Mass Flow Sensor Specifications 34-VF-03-09 May 2011 The Universal Solution for the Process Industry VERSAFLOW is the only sensor for mass flow in its class with secondary pressure
Coriolis Flowmeter with Model 1700 or Model 2700 Transmitter
Safety Manual P/N 20004482, Rev. BA April 2011 Coriolis Flowmeter with Model 1700 or Model 2700 Transmitter Safety Manual for SIS 2011 Micro Motion, Inc. All rights reserved. The Emerson logo is a trademark
Installation Manual , Rev DI March Micro Motion ELITE Coriolis Flow and Density Sensors
Installation Manual 20002158, Rev DI March 2014 Micro Motion ELITE Coriolis Flow and Density Sensors Safety and approval information This Micro Motion product complies with all applicable European directives
Micro Motion Technical Overview and Specification Summary
Product Data Sheet PS-00232, Rev. J June 2009 Micro Motion Technical Overview and Specification Summary Emerson s world-leading Micro Motion Coriolis flow and density measurement devices have set the standard
NGS. Dual-Magnet Float Switch. Pressure: up to 25 bar. Density: > 0.7 kg/dm 3. High switch capacity. Material: stainless steel 1.
Dual-Magnet Float Switch measuring monitoring analysing NGS Pressure: up to 5 bar O O Medium temperature: up to 50 C Density: > 0.7 kg/dm 3 High switch capacity O O Connection: square flange, DIN flange,
Installation Manual , Rev DH October Micro Motion ELITE Coriolis Flow and Density Sensors
Installation Manual 20002158, Rev DH October 2013 Micro Motion ELITE Coriolis Flow and Density Sensors Safety and approval information This Micro Motion product complies with all applicable European directives
Models 4700P/4700E & 4800P/4800E
GE Oil & Gas Technical Specifications 09/202 Masoneilan * Products Models 4700P/4700E & 4800P/4800E Corrosion-resistant Positioners Numbering System Series Identification 4abcd a Output capacity 7 Standard
MMA. Insertion Resistance Thermometers. with, or without transmitter. OEconomically-priced O thermometers with optional plug-on display
Insertion Resistance Thermometers with, or without measuring monitoring analysing MMA OEconomically-priced O digital thermometers with optional plug-on display O O Compact construction with or without
OPTIMASS 3000 Technical Datasheet
OPTIMASS 3000 Technical Datasheet Sensor for mass flow First choice for low flow applications Certified secondary pressure containment A common footprint for all three sizes, in Hastelloy or Stainless
RHM 04 - Universal Coriolis Mass Flowmeter with particular Fast Response
RHM 04 - Universal Coriolis Mass Flowmeter with particular Fast Response The RHM 04 can measure flow rates up to 10 kg/min (21 lb/min) with extremely fast response times and excellent repeatability. A
Coriolis Flow Solutions for a Global Marketplace
Coriolis Flow Solutions for a Global Marketplace www.tricorflow.com DECADES of EXPERIENCE = EXCEPTIONAL RESULTS When you combine decades of experience with truly unique talents, great things can happen.
Ultimate Low Flow Coriolis Mass Flowmeter
RHM 015 - Ultimate Low Flow Coriolis Mass Flowmeter The RHM 015 can reliably measure flow rates as low as 1 g/min (0.002 lb/min). With its extremely wide turn-down ratio of 300 to 1, this model is perfect
TWL-Exia. Resistance Thermometers according to DIN. Ignition Protection Exia. Pt 100-sensor class A respectively class B
Resistance Thermometers according to DIN Ignition Protection Exia measuring monitoring analysing TWL-Exia O O Measuring range: -...+600 C OO Pt 100-sensor class A respectively class B OO Output: resistance
RHM 12 - Standard 1 inch Coriolis Mass Flowmeter
RHM 12 - Standard 1 inch Coriolis Mass Flowmeter The RHM 12 can measure flow rates up to 100 kg/min with temperatures in excess of 400 C and pressures up to 290 bar. This model is truly a versatile solution,
MAN-P. Diaphragm Pressure Gauges. according to EN for Stringent Demands
Diaphragm Pressure Gauges according to EN 837-3 for Stringent Demands measuring monitoring analysing MAN-P Housing: mm, 160 mm Connection: G ½, open measuring flange DIN/ANSI Material: stainless steel
SITRANS F flowmeters SITRANS F C
SITRNS F flowmeters Siemens G 2008 Overview is available as a standard version (DN 50 to DN 150 (2 to 6 )) and a hygienic, EHEDG certified version (DN 20 to DN 80 (¾ to 3 )). MC2 and MC2 hygienic are suitable
SITRANS F C. Flow sensor MC2 4/193. Overview
Siemens G 2011 low Measurement SITNS C Overview The main applications of the Coriolis flowmeter can be found in all industries, such as: Chemical and pharma Detergents, bulk chemicals, pharmaceuticals,
Technical Data Sheet , Rev HA October Rosemount 8800 Vortex Installation Effects
Technical Data Sheet 00816-0100-3250, Rev H October 2017 Rosemount 8800 Vortex Installation Effects Contents Contents Chapter 1 Introduction...1 1.1 Temperature effects on K-factor... 1 1.2 Pipe ID effects
SITRANS F flowmeters SITRANS F C SITRANS F C MC2 4/169. Overview
Siemens G 2009 SITRNS flowmeters SITRNS C SITRNS C MC2 Overview SITRNS C MC2 is available as a standard version (DN 50 to DN 150 (2 to 6 )) and a hygienic, EHEDG-certified version (DN 20 to DN (¾ to 3
FLA Series Pressure Reducing Regulator
FL Series Pressure Reducing Regulator May 2011 Figure 1. Type FL Pressure Regulator Features E0820 xial Flow Type High ccuracy Balanced Valve Design Low Differential Pressure for Full Capacity Fast Response
Paddle Flow Monitor Model PSR/PSE
Paddle Flow Monitor for liquids measuring monitoring analysing PSR/PSE Switching ranges: 2.5-4.8... 383-533 p max : 250 bar, t max : 110 C Connection: G ¼... G 1 ½, ¼" NPT... 1 ½" NPT S3 : or stainless
RHM40. Coriolis Mass Flow Meter for Demanding Applications. Features. Applications. Benefits
RHM40 Coriolis Mass Flow Meter for Demanding Applications Features Standard pressure ratings up to 433 bar (6280 psi) Temperature ratings from -196 to 350 C (-320 to 662 F) Mass flow uncertainty down to
RCM. Direct Reading Flowmeter. for Liquids or Gases
Direct Reading Flowmeter for Liquids or Gases measuring monitoring analyzing RCM Compact Design Easy to Install Horizontal or Vertical Installation Flow Rates up to 3000 GPM (Liquid) or 20000 SCFM (Gas)
Coriolis Mass Flowmeter for low flow measurements
RHM 03 - Flexible Coriolis Mass Flowmeter for low flow measurements The RHM 03 can measure flow rates up to 5 kg/min (11 lb/min) with temperatures in excess of 400 C and pressures to 868 bar. This model
Densitometers L-Dens 427F Ex Density Sensor Specifications
Issue/Rev. 0.1 (2/12) Densitometers L-Dens 427F Ex Density Sensor Specifications Bulletin SS04001E The L-Dens 427F Ex Density Sensor combines an accuracy of 1 x 10-4 g/cm 3 in a compact design. Continuous
RHM 04. Universal Coriolis Mass Flowmeter with particular Fast Response. Applications. Features. Advantages
RHM 04 Universal Coriolis Mass Flowmeter with particular Fast Response The RHM 04 can measure flow rates up to 10 kg/min (22 lb/min) with extremely fast response times and excellent repeatability. A true
RHM 03 a1 - (low stress in welds and increased wall thickness against abrasion) RHM bar APPLICATIONS. Batching Dosing. Injections Filling
RHM 03 a1 - RHM 03 0.05 ~ 5 kg/min (11 lb/min), -200 ~ 400 C, APPLICATIONS Batching Dosing Injections Filling FEATURES 868 bar 0.005 kg/min ~ 5 kg/min (11 lb/min) 0.1% 0.05% process connection. ADVANTAGES
SM Series. High Pressure - All-Metal Flowmeter and Switch
High Pressure - All-Metal Flowmeter and Switch measuring monitoring analyzing SM Series Accuracy: ± 5% Full Scale Max. Pressure: 3600 / 5000 PSI or Versions Direct Reading Scales for Water or Air Small,
Coriolis Flow Solutions for a Global Marketplace
Coriolis Flow Solutions for a Global Marketplace www.tricorflow.com DECADES of EXPERIENCE = EXCEPTIONAL RESULTS When you combine decades of experience with truly unique talents, great things can happen.
RHM 03. Flexible Coriolis Mass Flowmeter for low flow measurements. Applications. Features. Advantages
RHM 03 Flexible Coriolis Mass Flowmeter for low flow measurements The RHM 03 can measure flow rates up to 5 kg/min (11 lb/min) with temperatures in excess of 400 C and pressures to 868 bar. This model
Terminal Boxes Series 8125
Series > Wide product range > Enclosure of electropolished stainless steel.0 (AISI L) or galvanised steel sheet painted > basic enclosure sizes various heights > Fitted according to the customer's requirements
Data Sheet P4055 Pressure Transducer
Data Sheet P4055 Pressure Transducer Main Features Pressure Ranges Electrical Connection Pressure Connection Housing Material Output Signal 0 to 3 up to 0 to 300 PSI Packard Electric Metri-Pack 150 Series
Resistance thermometer For sanitary applications, exchangeable sensor Model TR22-A
Temperature Resistance thermometer For sanitary applications, exchangeable sensor Model TR22-A WIKA data sheet TE 60.22 for further approvals see page 15 Applications Sanitary applications Food and beverage
Promass Q for the process industry
Products Solutions Services Promass Q for the process industry A unique Coriolis innovation from Endress+Hauser Slide 1 Promass Q for the process industry Promass Q Design Coriolis flowmeter Available
RHM 015. Ultimate Low Flow Coriolis Mass Flowmeter. Applications. Features. Advantages
RHM 015 Ultimate Low Flow Coriolis Mass Flowmeter The RHM 015 can reliably measure flow rates as low as 1 g/min (0.002 lb/min). With its extremely wide turn-down ratio of 300 to 1, this model is perfect
Vortex Flow Meter Model DVH
Vortex Flow Meter measuring monitoring analysing DVH Measuring range: 3-8... 3057-280187 Nm³/h Accuracy: ± 0,7 % of reading (liquids) ± 1 % of reading (gases and steam) p max : 100 bar abs; t max : 400
Information Technology and Economic Development: An Introduction to the Research Issues
November 1998 Working Papers No. 153 Information Technology and Economic Development: An Introduction to the Research Issues TABLE 1 WORLD-WIDE INFORMATION TECHNOLOGY MARKET BREAKDOWN, 1995
Flow Measurement SITRANS F C
Overview The complete flowmeter system SITRANS FC40 can be ordered for standard, hygienic or NAMUR service. All versions can be ordered for CT service, according to OIML R 117 (Liquids other than water)
TOP SMART intelligent position monitor:
TOP SMART intelligent position monitor: Air Torque also manufacture the Top smart intrinsically safe compact valve position monitor with integrated diagnostics, self calibrating limit switches, integrated
SentronicPLUS IO-Link CLASS A Electronic Pressure Regulator. Installation Manual
SentronicPLUS IO-Link CLASS A Electronic Pressure Regulator Installation Manual Sentronic PLUS ASCO NUMATICS Sentronic PLUS Electronic Pressure Regulator Sentronic PLUS is a 3-way proportional valve with
RHM30. Coriolis Mass Flow Meter for Plant and Loading Flows. Features. Applications. Benefits
RHM30 Coriolis Mass Flow Meter for Plant and Loading Flows Features Standard pressure ratings up to 798 bar (11574 psi) Temperature ratings from -196 to 350 C (-320 to 662 F) Mass flow uncertainty down
fact sheet Masoneilan * 8012/8013 Series Electro-pneumatic Valve Positioners GE Oil & Gas Excellent Dynamic Response and Positioning Accuracy
GE Oil & Gas Masoneilan * 8012/8013 Series Electro-pneumatic Valve Positioners fact sheet Excellent Dynamic Response and Positioning Accuracy Accurate, Simple, Rugged The primary function of a valve positioner
Flow Measurement SITRANS F C
Siemens G 2014 SITRNS C Overview The main applications of the Coriolis flowmeter can be found in all industries, such as: Chemical and pharma Detergents, bulk chemicals, pharmaceuticals, acids, alkalis
Bettis EHO Electro-Hydraulic Operator
ettis Electro-Hydraulic Operator The ettis is a self-contained, quarter-turn, valve actuator that combines proven technologies from Emerson s Valve utomation. The actuator has been designed for critical
Rosemount Manifolds. Product Data Sheet April , Rev PC. Factory assembled, leak-tested, and calibrated
Product Data Sheet pril 2015 00813-0100-4733, Rev PC Rosemount Manifolds Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and in-line designs Integral
Level Measurement Continuous level measurement - Radar transmitters
Overview Configuration Installation Note: Beam angle is the width of the cone where the energy density is half of the peak energy density Emission The peak energy density cone is directly in front of and
RHM The world s largest Coriolis Mass Flowmeter for flow rates up to kg/min
RHM 160 - The world s largest Coriolis Mass Flowmeter for flow rates up to 25000 kg/min The RHM 160 can measure flow rates up to 1500 t/hr with the patented Omega shape meter technology manufactured by
Masoneilan* Series Direct-Operated, Pressure Reducing Regulator
GE Oil & Gas Technical Specifications 03/2016 Masoneilan* 171-172 Series Direct-Operated, Pressure Reducing Regulator GE Data Classification : Public ing System 1st 2nd 3rd 1st 2nd 3rd 4th Option 1 7 X
Vortex Flowmeter Model DVE
Vortex Flowmeter Multi-Parameter measuring monitoring analysing DVE Measuring range Liquids: 5.2-157... 284-85371 m³/h Air: 89-1463... 26915-2467081 Nm 3 /h (20 C, 0 bar rel) Saturated steam: 81-938...
SITRANS P measuring instruments for pressure
Overview Application The pressure transmitter is designed for the special requirements of the food, pharmaceutical and biotechnology industries. The use of high-grade materials guarantees compliance with
DVH. Vortex Flowmeter. Measuring range: Nm³/h. Accuracy: ± 0,7% of reading (liquids) ± 1% of reading (gases and steam) p max
Vortex Flowmeter measuring monitoring analysing DVH Measuring range: 3-8... 3057-280187 Nm³/h Accuracy: ± 0,7% of reading (liquids) ± 1% of reading (gases and steam) p max : 100 bar abs; t max : 400 C
OPTIMASS 2000 Technical Datasheet
OPTIMASS 2000 Technical Datasheet Sensor for bulk mass flow Large diameter for bulk measurement and custody transfer of liquids and gases Stainless Steel measuring tubes (NACE Compliant) Modular electronics
M-60X. Explosion Proof Flowswitch with In-line Flow. Description. Key Features. Operating Principle. Applications. Custom Version Available
Explosion Proof Flowswitch with In-line Flow Key Features Well suitable for corrosive and noncorrosive liquids or gases UL recognized for hazardous location ATEX certified for intrinsic safety and encapsulation
RHM015. Ultimate Performance Coriolis Mass Flow Meter for Critical Ultra Low Flow Applications. Features. Applications. Benefits
RHM015 Ultimate Performance Coriolis Mass Flow Meter for Critical Ultra Low Flow Applications Features Standard pressure ratings up to 752 bar (10907 psi) Temperature ratings from -196 to 350 C (-320 to
RHM Coriolis Mass Flowmeter for high Flow Applications
RHM 100 - Coriolis Mass Flowmeter for high Flow Applications The RHM 100 can measure up to 720 t/hr with the superior and patended Omega shape meter technology manufactured by rheonik, the mass flowmeter
M-200X. Explosion Proof Adjustable Flow Switch with Right Angle Flow. Key Features. Description. Operating Principle. Applications
Explosion Proof Adjustable Flow Switch with Right Angle Flow Key Features Field adjustable Infinite flow range Extremely accurate and sensitive Low pressure drop UL recognized for hazardous location ATEX
fact sheet Masoneilan * 8007/8008 Series Electro-pneumatic Transducers GE Energy Nozzle Design Reducing Effects of Vibration Overview
GE Energy Masoneilan * 8007/8008 Series Electro-pneumatic Transducers fact sheet Nozzle Design Reducing Effects of Vibration Overview Model 8007 and 8008 electro-pneumatic transducers convert a low-power
Lifting Instructions for 1336 PLUS and FORCE D Frame Drives
Installation Instructions Lifting Instructions for 1336 PLUS and FORCE D Frame Drives This publication will guide you through the steps needed to properly lift and mount the following drives: 1336 PLUS
Consolidated* Valves 1511 Series Safety Valve
Technical Specifications Rev. B - 10/2018 Consolidated* Valves 1511 Series Safety Valve Offering proven, high-performance design for low-pressure, steam heating boilers and steam generators, as well as
RHM04. Compact Coriolis Flow Sensor With Enhanced Performance. Features. Applications. Benefits
RHM04 Compact Coriolis Flow Sensor With Enhanced Performance Features Standard high pressure versions up to 1067 bar (15475 psi) Temperature ratings from -196 to 350 C (-320 to 662 F) Mass flow uncertainty
RHM08. Versatile Coriolis Mass Flow Meter. Features. Applications. Benefits
RHM08 Versatile Coriolis Mass Flow Meter Features Standard pressure ratings up to 1254 bar (18188 psi) Temperature ratings from -196 to 350 C (-320 to 662 F) Mass flow uncertainty down to 0.10% Repeatability
Technical Data Sheet , Rev HB October Rosemount 8800 Vortex Installation Effects
Technical Data Sheet 00816-0100-3250, Rev HB October 2018 Rosemount 8800 Vortex Installation Effects 2 Technical Data Sheet Contents 00816-0100-3250 October 2018 Contents Chapter 1 Introduction... 5 1.1
Resistance thermometer Without thermowell Model TR10-H
Temperature Resistance thermometer Without thermowell Model TR10-H WIKA data sheet TE 60.08 for further approvals see page 2 Applications For direct installation into the process Machine building Motors
Masoneilan* Series Eccentric Rotary Control Valve with PFA Liner
Technical Specifications 10/2017 Masoneilan* 31000 Series Eccentric Rotary Control Valve with PFA Liner BHGE Data Classification : Public Contents Features...3 Numbering System...4 General Data...5 Connections...6