Micro Motion 7829 Viscomaster Series Accessories

Size: px

Start display at page:

Download "Micro Motion 7829 Viscomaster Series Accessories"

Emmeline Norton
5 years ago
Views:

1 Product Data Sheet PS , Rev. C pril 2013 Micro Motion 7829 Viscomaster Series ccessories Micro Motion 7829 Viscomaster viscosity meters are built to tackle the most demanding marine and power applications. Rugged and reliable with very low maintenance, these vibrating fork meters are the industry standard for heavy fuel oil (HFO) measurement applications. Integral to these meters are the installation accessories designed to simplify mounting the Viscomaster meters into specific applications. Micro Motion offers retro-fit kits for alternate technologies, flow-through chambers, and other associated accessories to meet your installation needs. Superior installation flexibility Pipeline installations are accommodated Retro-fit kits for simple replacement of alternate viscosity meters Compatible with marine and power application process conditions Highest reliability and safety Optimized design insensitive to vibration, flow, temperature and pressure variations.

Micro Motion 7829 Viscomaster Viscosity Meter ccessories The Micro Motion 7829 Viscomaster viscosity meters are used for the measurement of viscosity, density, and temperature and are designed for

2 Micro Motion 7829 Viscomaster Viscosity Meter ccessories The Micro Motion 7829 Viscomaster viscosity meters are used for the measurement of viscosity, density, and temperature and are designed for installation in the process pipeline. range of accessories have been created to simplify the installation task: Flow-through chambers (2 nominal bore) for in-line or slipstream/bypass loops Retro-fit kits for the simple replacement of alternate vibrating or capillary viscosity meters Blanking plugs DView and ProLink (version 2.9 or later) configuration tools Viscosity controllers Cone-seat fittings The cone-seat fitting is the preferred method of Micro Motion to connect fork sensors into the process installation. Designed for compactness, low mass and high integrity sealing, they enable optimum performance in all application types. The cone-seat fitting is based on the concept of a metal-to-metal seal, produced between dissimilar conical surfaces on the meter and accessory bodies. Transmitter stem Transmitter cone Metal-to-metal seal Compression nut Reliable and leak resistant even under rapid process temperature and pressure changes the cone-seat fitting does not rely upon threads, gaskets or O-rings to produce a consistent seal, unlike other viscosity technology designs. Cone-seat fitting Installation accessory Contents Flow-through chambers Retro-fit installation kits Blanking plug Viscosity controllers Installation practices and sizing Ordering information flow-through chambers... 9 Ordering information retrofit kits Ordering information blanking plugs Micro Motion 7829 Viscomaster Viscosity Meter ccessories

3 Flow-through chambers bout the flow-through chamber Micro Motion designed the flow-through chamber accessory to be used with all Viscomaster viscosity meters. This accessory simplifies the installation of the meters in in-line and slipstream/bypass applications. The flow-through chamber has been designed to connect to 2 (DN50) nominal pipe bores, with a number of available flange variants. This chamber conditions the flow of the product over the meter so that flow rates of up to 20 m 3 /hr (88 gal/min) at temperatures up to 200 C (392 F) can be reliably measured. The flow-through chamber provides the greatest flexibility to process variations, and should be considered where temperature and pressure changes are significant and the possibility of entrained air exists. Features Provides 2 pipe bore connection Can be used with fluid viscosities up to 1000 cp Can be used with line pressures up to 100 bar Can be used where line temperature is up to 200 C (392 F) Dimensions shown in inches (mm) Ø D B 1/2" 14 NPT temperature port (optional) OUTLET Model 782X installed Instrument connection coneseat nut 2.25" /F INLET Ø D C 8.58 (218) REF Process connection DIM B DIM C DIM D DIM 2" NSI 150RF (320) (259) 7.80 (198) 5.98 (150) 2" NSI 300RF (326) (265) 8.03 (204) 6.5 (165) 2" NSI 600RF (336) (275) 8.43 (214) 6.5 (165) (50 mm) DIN2527 DN 50 PN (304) 9.57 (243) 7.17 (182) 6.5 (165) (50 mm) DIN2527 DN 50 PN (324) (263) 7.95 (202) 7.68 (195) Micro Motion 7829 Viscomaster Viscosity Meter ccessories 3

4 Retro-fit installation kits VF Viscosense dapter kit The VF Viscosense dapter kit is specifically designed to replicate the footprint of the VF Viscosense chamber to allow you to easily install a Viscomaster viscosity meter without requiring changes to the pipework or flow system. Because the Viscomaster has no limitations on cable length or need for an interface box, wiring requirements for the installation of this meter are significantly reduced. No mounting for remote electronics housings near the meter are required. ll major flange variants offered with the Viscosense are supported by the VF Viscosense dapter kit. Dimensions shown in inches (mm) 4.5 (115) 150 mm unit shown DN50 PN16 flanges shown ll units are of 2" (50 mm) nominal bore 14.5 (369) E F Ø B Ø 5.9 (150) FLNGE Ø DIM Ø B DIM E DIM F DIM DIN2527 PN 10/ (165) 4.0 (102) 0.63 (16) (2) DIN2527 PN 25/ (165) 4.0 (102) 0.71 (18) (2) NSI B16.5 Class (152.4) 3.6 (92) 0.69 (17.4) (1.6) NSI B16.5 Class (165.1) 3.6 (92) 0.82 (20.8) (1.6) JIS B K 6.1 (155) F/F 0.63 (16) F/F JIS B K 6.1 (155) F/F 0.63 (16) F/F JIS B K 6.1 (155) 3.8 (96) 0.63 (16) (2) JIS B K 6.5 (165) 4.1 (105) 0.79 (20) (2) 4 Micro Motion 7829 Viscomaster Viscosity Meter ccessories

5 Universal Retrofit dapter kit Because the replacement and upgrade of existing or obsolete viscosity meter technologies does not always conform to the current installation dimensions, Micro Motion offers a Universal Retrofit dapter kit that can accommodate most chamber sizes. This kit allows you to easily install a Viscomaster viscosity meter without requiring changes to the pipework or flow system. Dimensions shown in inches (mm) 4.5 (115) 150 mm unit shown DN50 PN16 flanges shown ll units are of 2" (50 mm) nominal bore E F Ø B Ø 14.5 (369) The L dimension is either 7.9 (200), 9.8 (250), or 11.8 (300). L FLNGE Ø DIM Ø B DIM E DIM F DIM DIN2527 PN 10/ (165) 4.0 (102) 0.63 (16) (2) DIN2527 PN 25/ (165) 4.0 (102) 0.71 (18) (2) NSI B16.5 Class (152.4) 3.6 (92) 0.69 (17.4) (1.6) NSI B16.5 Class (165.1) 3.6 (92) 0.82 (20.8) (1.6) JIS B K 6.1 (155) F/F 0.63 (16) F/F JIS B K 6.1 (155) F/F 0.63 (16) F/F JIS B K 6.1 (155) 3.8 (96) 0.63 (16) (2) JIS B K 6.5 (165) 4.1 (105) 0.79 (20) (2) Micro Motion 7829 Viscomaster Viscosity Meter ccessories 5

6 VF Viscotherm / Nakakita dapter kit The VF Viscotherm / Nakakita dapter kit is designed to attach to the Viscomaster viscosity meter, and is then inserted directly into either a VF Viscotherm or Nakakita chamber. The capillary sensor and pump assemblies of the viscosity meters being replaced are no longer required with this retrofit. The flange fittings on this adapter kit are designed to fit directly onto the mating flanges of the existing capillary sensors. Dimensions shown in inches (mm) Ø 6.3 (160) 4.5 (115) (301) 1.57 (40) Blanking plug bout the blanking plug blanking plug is used to close the meter entry point, if at any time you need to remove the meter and restore flowing conditions such as for service or to flush the installation. The blanking plug is designed only for meter installations that use a cone-seat fitting. Features Consists of a securing nut and a cone-seat fitting plug, which provides the same sealing integrity as the meter Can be used with any cone-seat version of the flow-through chamber and pipeline weldolet accessories 6 Micro Motion 7829 Viscomaster Viscosity Meter ccessories

Viscosity controllers range of panel-mount microprocessor-based viscosity controllers are available that can directly interface with the Viscomaster viscosity meters.

7 Viscosity controllers range of panel-mount microprocessor-based viscosity controllers are available that can directly interface with the Viscomaster viscosity meters. These controllers use the meter viscosity output, or an external PT100, to control heaters for preconditioning fuel oils prior to combustion in large engines. The controllers are available with single or dual channels, continuous or three-point control, and alarms for relay control. These devices have LED displays and are configured using simple menus. ll controllers are panel mount and require a 230 V power supply. Single channel Dual channel (1) Model B BBB BBBB Input(s) 4 20 m input for viscosity 4 20 m input for viscosity 4 20 m input for viscosity PT100 input for temperature 4 20 m input for viscosity PT100 input for temperature Control 2 relays 4 20 m 2 relays 4 20 m larm relay(s) Temperature or viscosity control (switchable) Temperature or viscosity control (switchable) (1) On dual-channel viscosity controllers, an additional 4 20 m signal output is available. This output can be used for rescaling the viscosity input, but cannot be used for heater control. Dimensions shown in inches (mm) 3.8 (96) 3.6 (92) 3.8 (96) 0.2 (4) 5.9 (150) Panel cut-out: x ( x ) Micro Motion 7829 Viscomaster Viscosity Meter ccessories 7

Installation practices and sizing s a result of the superior installation flexibility of the Micro Motion fork density and viscosity meters, each accessory has been designed for a variety of

8 Installation practices and sizing s a result of the superior installation flexibility of the Micro Motion fork density and viscosity meters, each accessory has been designed for a variety of application conditions. The following guides have been designed to help you choose the installation type and accessory for your application. Installation type versus flow rate 8 Micro Motion 7829 Viscomaster Viscosity Meter ccessories

9 Ordering information flow-through chambers Model Product description Flow-through chamber for 7829 vibrating fork meter Code Inlet / Outlet Pipe size Flow Range Calibration Boundary E 2-inch (50 mm) sch l/min 3-inch Schd 80 Code Materials 316L Stainless Steel Z ETO Code Certification B None C PED approved Code Flow-through chamber connection to 782x N 1.5-inch Cone Seat Compression Fitting Code Process Connections J 2-inch NSI 150RF Flanges L 2-inch NSI 300RF Flanges N 2-inch NSI 600RF Flanges R DIN2527 DN 50/PN40 T DIN2527 RF DN 50/PN100 P Weld prepared ends Z ETO Flange Code Temperature Port None B Temperature Port 1/2 NPT fitting Code Future Option None Code Traceability None X Certificates of material traceability Code Factory Option Standard Z ETO Typical model number: EBNN Micro Motion 7829 Viscomaster Viscosity Meter ccessories 9

10 Ordering information retrofit kits VF Viscosense adapter kit Model Product Description Series Retrofit adapter for VF Viscosense Code Spoolpiece width Calibration boundary 150 mm 2-1/2 schedule 40 (73 mm O/D, 63 mm I/D) Code Pipe bore DN50 Code Materials Carbon steel Code Process connections DIN2527 DN50 PN 10/16 B DIN2527 DN50 PN 25/40 C NSI 150 RF D JIS 10K E JIS 16K F JIS 20K Z ETO process connection Code Traceability None X Certificates of material traceability Typical model number: Universal Retrofit adapter kit Model Product Description Series Universal retrofit adapter kit Code Spoolpiece width Calibration boundary B 200 mm 2-1/2 schedule 40 (73 mm O/D, 63 mm I/D) C 250 mm 2-1/2 schedule 40 (73 mm O/D, 63 mm I/D) D 300 mm 2-1/2 schedule 40 (73 mm O/D, 63 mm I/D) Z ETO spoolpiece width 2-1/2 schedule 40 (73 mm O/D, 63 mm I/D) Code Pipe bore DN50 B DN80 Z ETO pipe bore Code Materials Carbon steel Z ETO material 10 Micro Motion 7829 Viscomaster Viscosity Meter ccessories

11 Universal Retrofit adapter kit continued Code Process connections vailable with Pipe bore only DIN2527 DN50 PN 10/16 B DIN2527 DN50 PN 25/40 C NSI 150 RF D JIS 10K E JIS 16K F JIS 20K vailable with Pipe bore Bonly G DIN2527 DN80 PN 10/16 H DIN2527 DN80 PN25/40 vailable with all pipe bores Z ETO process connection Code Traceability None X Certificates of material traceability Typical model number: B VF Viscotherm / Nakakita adapter kit Model Product Description Viscomaster retrofit adapter for VF Viscotherm and Nakakita viscosity meters Code Insertion depth Calibration boundary 40 mm 2-1/2 schedule 40 (73 mm O/D, 63 mm I/D) Z ETO insertion depth 2-1/2 schedule 40 (73 mm O/D, 63 mm I/D) Code Materials Carbon steel Z ETO material Code Process connections VF V12/V92 Viscotherm flange B Nakakita flange Code Traceability None X Certificates of material traceability Typical model number: Micro Motion 7829 Viscomaster Viscosity Meter ccessories 11

12 Ordering information blanking plugs Model Product Description ccessories blanking plugs Code Size 1/2-inch Plug and Ferrule B 3/4-inch Plug and Ferrule C 1 1/2-inch Plug (no Ferrule required) Code Material 316L Stainless Steel Z ETO material Code Traceability None X Certificates of material traceability Typical model number: Micro Motion 7829 Viscomaster Viscosity Meter ccessories

13 Micro Motion 7829 Viscomaster Viscosity Meter ccessories 13

14 14 Micro Motion 7829 Viscomaster Viscosity Meter ccessories

15 Micro Motion 7829 Viscomaster Viscosity Meter ccessories 15

Micro Motion The undisputed leader in flow and density measurement World-leading Micro Motion measurement solutions from Emerson Process Management deliver what you need most: Technology leadership

16 Micro Motion The undisputed leader in flow and density measurement World-leading Micro Motion measurement solutions from Emerson Process Management deliver what you need most: Technology leadership Micro Motion introduced the first reliable Coriolis meter in Since that time, our ongoing product development has enabled us to provide the highest performing measurement devices available. Product breadth From compact, drainable process control to high flow rate fiscal transfer look no further than Micro Motion for the widest range of measurement solutions. Unparalleled value Benefit from expert phone, field, and application service and support made possible by more than 750,000 meters installed worldwide and over 30 years of flow and density measurement experience Micro Motion, Inc. ll rights reserved. The Micro Motion and Emerson logos are trademarks and service marks of Emerson Electric Co. Micro Motion, ELITE, MVD, ProLink, MVD Direct Connect, and PlantWeb are marks of one of the Emerson Process Management family of companies. ll other trademarks are property of their respective owners. Micro Motion supplies this publication for informational purposes only. While every effort has been made to ensure accuracy, this publication is not intended to make performance claims or process recommendations. Micro Motion does not warrant, guarantee, or assume any legal liability for the accuracy, completeness, timeliness, reliability, or usefulness of any information, product, or process described herein. We reserve the right to modify or improve the designs or specifications of our products at any time without notice. For actual product information and recommendations, please contact your local Micro Motion representative. ustralia China India Japan South Korea For a complete list of contact information and websites, please visit:

Micro Motion Insertion Density and Viscosity Meter Accessories

Product Data Sheet PS-001057, Rev. F pril 2013 Micro Motion Insertion Density and Viscosity Meter ccessories Micro Motion insertion density and viscosity meters are built to tackle the most demanding process