Micro Motion ELITE Coriolis Flow and Density Meters

Transcription

1 Micro Motion ELITE Coriolis Flow and Density Meters Product Data Sheet PS-00374, Rev V April 2013 Ultimate real world performance Unchallengeable ELITE performance on liquid mass flow, volume flow, and density measurements Best-in-class gas mass flow measurement Reliable two-phase flow measurement for the most challenging applications Designed to minimize process, mounting, and environmental effects Best fit-for-application Scalable platform for the widest range of line size and application coverage including hygienic, cryogenic, high pressure, and high temperature Available with the broadest range of I/O offerings highlighted by expansive digital protocol support Superior measurement confidence Smart Meter Verification delivers complete, online verification of device health and performance, continuously or on-demand at the press of a button Globally leading ISO/IEC calibration facilities offers best in class uncertainty of ±0.014% Intelligent sensor design mitigates the need for zero calibration in the field ELITE F-Series H-Series T-Series R-Series LF-Series Peak Performance High Performance Compact Drainable Hygienic Compact Drainable Straight Tube Sanitary Utility Basic Performance Extreme Low Flow

2 Micro Motion ELITE series Coriolis flow and density meters Micro Motion ELITE meters provide unmatched flow and density measurement performance to deliver the ultimate control and confidence in your most complex and challenging liquid, gas, and slurry applications. Achieving the ultimate flow fit for your application Able to achieve the best fit for your flow measurement with a wide range of tube designs and flow rate coverage to best serve your application Peak performance in a drainable design with a variety of industry approvals for use in strictly governed sanitary applications Scalable platform for a broad array of application coverage including hygienic, cryogenic, and high pressure Smart Meter Verification: advanced diagnostics for your entire system A comprehensive test that can be run locally or from the control room to provide confidence in your meter functionality and performance Verifies that your meter performs as well as the day it was installed, giving you assurance in less than 90 seconds Save significant expenditure by reducing labor and outsourced calibration service costs while eliminating process interruption Industry-leading capabilities that unleash your process potential Available with the most extensive offering of transmitter and mounting options for maximum compatibility with your system Meters calibrated according to ISO standards using state of the art calibration standards achieving ±0.014% uncertainty The most robust communication protocol offering in the industry including Smart Wireless True multi-variable technology measures necessary flow and density process variables simultaneously Case pressure ratings which adhere to ASME B31.3, ASME B31.1, and NAMUR NE132 international standards Unparalleled performance in twophase flow conditions Featuring the lowest frequency Coriolis sensors that ensure the two-phase mixture vibrates with the tube to drastically reduce entrained gas uncertainty contributions Unmatched MVD transmitter technology with digital signal processing (DSP) delivers the fastest response and refresh rates enabling accurate batch and other two-phase flow measurement Measure fluids with any Gas Void Fraction (GVF). The relationship to mass flow uncertainty contribution varies with application Table of Contents Micro Motion ELITE series Coriolis flow and density Meter approvals and certifications meters... 2 Performance specifications...4 Transmitter interface Operating conditions: Environmental Physical specifications Operating conditions: Process Ordering information ELITE Coriolis Flow and Density Meters

3 Measurement principles As a practical application of the Coriolis effect, the Coriolis mass flow meter operating principle involves inducing a vibration of the flow tube through which the fluid passes. The vibration, though it is not completely circular, provides the rotating reference frame which gives rise to the Coriolis effect. While specific methods vary according to the design of the flow meter, sensors monitor and analyze changes in frequency, phase shift, and amplitude of the vibrating flow tubes. The changes observed represent the mass flow rate and density of the fluid. Mass flow measurement The measuring tubes are forced to oscillate producing a sine wave. At zero flow, the two tubes vibrate in phase with each other. When flow is introduced, the Coriolis forces cause the tubes to twist resulting in a phase shift. The time difference between the waves is measured and is directly proportional to the mass flow rate. No flow With flow Inlet pickoff displacement Outlet pickoff displacement Inlet pickoff displacement Outlet pickoff displacement Time Time Measurement Density measurement The measuring tubes are vibrated at their natural frequency. A change in the mass of the tubes causes a corresponding change to the vibration frequency. The new vibration frequency is used to calculate density. Temperature measurement Temperature is a measured variable that is available as an output, and it is also used compensate for change in the sensor's Young's modulus of elasticity and rigidity. Product Data Sheet 3

4 Meter sizing and compatibility Measurement accuracy is a function of fluid mass flow rate independent of operating temperature, pressure, or composition. However, pressure drop through the sensor is dependent upon operating temperature, pressure, and fluid composition. Specifications and capabilities vary by model, and certain models may have fewer available options. Please refer to the Online Store Sizing and Selection Tool at the Micro Motion website for detailed information regarding accuracy, turndown, and sizing of the meters. The model code letter following the base model number (example CMFS100M) represents a functional distinction in either material or application. M = Stainless Steel, H = Nickel Alloy, P = High Pressure, Y = Super Duplex. If no material code is shown in the table, the table data applies to all materials for that sensor model. The S, HC2, HC3, and HC4 designations are used to describe certain meter styles within the ELITE series and should be considered to possess the same qualities/specifications as other ELITE meters unless specifically noted. Performance specifications Reference operating conditions For determining the performance capabilities of our meters, the following conditions were observed/utilized: Water at 68 to 77 F and 14.5 to 29 psig (20 to 25 C and 1 to 2 bar) Accuracy based on industry leading accredited calibration stands according to ISO All models have a density range up to 5 g/cm 3 (5000 kg/m 3 ) Accuracy and repeatability on liquids and slurries Performance Specification Standard Optional Mass/volume flow accuracy ±0.10% of rate ±0.05% of rate Mass/volume flow repeatability ±0.05% of rate ±0.025% of rate Density accuracy ± g/cm 3 (±0.5 kg/m 3 ) ± g/cm 3 (±0.2 kg/m 3 ) Density repeatability ± g/m 3 (±0.2 kg/m 3 ) ± g/cm 3 (±0.1 kg/m 3 ) Temperature accuracy ±1 C ±0.5% of reading Temperature repeatability ±0.2 C Notes Stated flow accuracy includes the combined effects of repeatability, linearity, and hysteresis. The standard density accuracy option for the sensor models CMFS010, CMFS015 is ±0.002 g/cm 3 (±2 kg/m 3 ), optional accuracy is ± g/cm 3 (±0.5 kg/m 3 ) 4 ELITE Coriolis Flow and Density Meters

5 Accuracy and repeatability on gases Performance specification CMF models CMFS models Mass flow accuracy ±0.35% of rate ±0.25% of rate Mass flow repeatability ±0.20% of rate Temperature accuracy ±1 C ±0.5% of reading Temperature repeatability ±0.2 C Liquid flow rates Nominal flow rate Micro Motion has adopted the term nominal flow rate, which is the flow rate at which water at reference conditions causes approximately 14.5 psig (1 bar) of pressure drop across the meter. Mass flow rates for stainless steel models (304L, 316L, and Super Duplex, where applicable) Style Nominal line size Nominal flow rate Maximum flow rate Model inch mm lb/min kg/h lb/min kg/h CMFS010 1/10" DN CMFS015 1/6" DN CMFS025 1/4" DN CMFS040 3/8" DN , ,640 CMFS050 1/2" DN , ,820 CMFS075 3/4" DN , ,500 CMFS100 1" DN , ,900 CMFS /2" DN ,000 1,980 54,000 CMF010 1/10" DN CMF025 1/4" DN , ,180 CMF050 1/2" DN , ,800 CMF100 1" DN , ,200 CMF200 2" DN50 1,760 47,900 3,190 87,100 CMF300 3" DN75 5, ,000 9, ,000 CMF400 6" DN150 15, ,000 20, ,000 CMFHC2 8" DN200 27, ,000 54,000 1,470,000 CMFHC3 10" DN250 49,000 1,340,000 94,000 2,550,000 CMFHC4 12" DN300 75,000 2,040, ,000 3,266,000 Product Data Sheet 5

6 Mass flow rates for nickel alloy C22 and high pressure models Style Nominal line size Nominal flow rate Maximum flow rate Model inch mm lb/min kg/h lb/min kg/h CMFS010 1/10" DN CMFS015 1/6" DN CMFS025 1/4" DN ,770 CMFS050 1/2" DN , ,130 CMFS100 1" DN , ,500 CMFS /2" DN ,500 1,800 49,100 CMF010 1/10" DN CMF025 1/4" DN6 48 1, ,180 CMF050 1/2" DN , ,800 CMF100 1" DN , ,200 CMF200 2" DN50 1,760 47,900 3,190 87,100 CMF300 3" DN75 5, ,000 9, ,000 CMF400 6" DN150 15, ,000 20, ,000 Volume flow rates for stainless steel models Style Nominal flow rate Maximum flow rate Model gal/min barrels/h l/h gal/min barrels/h l/h CMFS CMFS CMFS , ,100 CMFS , ,640 CMFS , ,820 CMFS , ,500 CMFS , ,900 CMFS , ,000 CMF CMF , ,180 CMF , ,800 CMF , ,200 CMF , ,100 CMF , ,000 1,200 1, ,000 CMF400 1,820 2, ,000 2,400 3, ,000 CMFHC2 3,350 4, ,000 6,440 9,200 1,470,000 CMFHC3 5,880 8,400 1,340,000 11,270 16,100 2,550,000 6 ELITE Coriolis Flow and Density Meters

7 Style Nominal flow rate Maximum flow rate Model gal/min barrels/h l/h gal/min barrels/h l/h CMFHC4 8,990 12,800 2,040,000 14,350 20,500 3,266,000 Volume flow rates for nickel alloy C22 and high pressure models Style Nominal flow rate Maximum flow rate Model gal/min barrels/h l/h gal/min barrels/h l/h CMFS CMFS CMFS ,770 CMFS , ,130 CMFS , ,500 CMFS , ,100 CMF CMF , ,180 CMF , ,800 CMF , ,200 CMF , ,100 CMF , ,000 1,200 1, ,000 CMF400 1,820 2, ,000 2,400 3, ,000 Zero stability Zero stability is used when the flow rate approaches the low end of the flow range where the meter accuracy begins to deviate from the stated accuracy rating, as depicted in the turndown section below. When operating at flow rates where meter accuracy begins to deviate from the stated accuracy rating, accuracy is governed by the formula: accuracy = (zero stability/flow rate) x 100%. Repeatability is similarly affected by low flow conditions. Turndown capabilities The graph and table below represent an example of the measurement characteristics under various flow conditions. At flow rates requiring large turndowns (greater than 20:1), the zero stability values may begin to govern capability dependent upon flow conditions and meter in use. Product Data Sheet 7

8 :1 20:1 Accuracy, % :1 2: Flow rate, % of nominal Turndown from nominal flow rate 100:1 20:1 10:1 2:1 Accuracy ±% Pressure drop psi (bar) ~0 0.2 (0.01) 0.7 (0.05) 13.5 (0.93) Zero stability values for stainless steel models Model Zero stability lb/min kg/h CMFS CMFS CMFS CMFS CMFS CMFS CMFS CMFS CMF CMF CMF CMF CMF CMF CMF CMFHC CMFHC CMFHC ELITE Coriolis Flow and Density Meters

9 Zero stability values for nickel alloy C22 models Model Zero stability lb/min kg/h CMFS CMFS CMFS CMFS CMFS CMFS CMF CMF CMF CMF CMF CMF CMF Zero stability values for high pressure models Model Zero stability lb/min kg/h CMFS CMFS CMFS CMFS CMFS CMFS CMF CMF Pressure ratings Sensor maximum working pressure reflects the highest possible pressure rating for a given meter. Selection of process as well as environmental and process fluid temperatures may reduce this maximum rating. Detailed sensor pressure rating charts with corresponding deratings for specific process s over a range of temperatures are available in the technical data sheet or via product advisor, the online store, or instrument toolkit. All sensors comply with ASME B31.3 piping code and council directive 97/23/EC of 29 May 1997 on Pressure Equipment. Product Data Sheet 9

10 Sensor maximum working pressure for stainless steel models Model code psi bar CMFS010, CMFS015 1, CMFS025, CMFS040, CMFS050, CMFS075, CMFS100, CMFS150 1, CMF010, CMF025, CMF050 1, CMF100 1, CMF200 1, CMF300 1, CMF400 1, CMFHC2, CMFHC3, CMFHC4 1, Sensor maximum working pressure for nickel alloy C22 models Model code psi bar CMFS010, CMFS015 6, CMFS025, CMFS050, CMFS100, CMFS150 3, CMF010 3, CMF025 2, CMF050 2, CMF100 2, CMF200 2, CMF300 2, CMF400 2, Sensor maximum working pressure for high pressure models Model code psi bar CMFS010, CMFS015 6, CMFS025, CMFS050, CMFS100, CMFS150 3, CMF010 6, CMF400 2, Sensor maximum working pressure for Super Duplex models Model code psi bar CMFHC2, CMFHC3 2, Operating conditions: Environmental Vibration limits Meets IEC , endurance sweep, 5 to 2000 Hz, 50 sweep cycles at 1.0 g. 10 ELITE Coriolis Flow and Density Meters

11 Temperature limits Standard ELITE meters Gray area = Mount transmitter remotely (use junction box) 176 (80) 140 (60) 140 (60) Ambient temperature of core processor or transmitter in F ( C) 104 (40) 68 (20) 32 (0) 4 ( 20) 40 ( 40) 76 ( 60) 112 ( 80) ELITE CMFS 113 (45) 148 ( 100) 400 ( 240) 292 ( 180) 184 ( 120) 76 ( 60) Process temperature in F ( C) 58( 50) 32 (0) 140 (60) 248 (120) 356 (180) 400 (204) 464 (240) Notes The sensor electronics must be maintained between 40 F ( 40 C) and +140 F (+60 C). Long-term storage of electronics at ambient temperatures below 40 F ( 40 C) is not recommended. Temperature limits may be further restricted by hazardous area approvals. Refer to the hazardous area approvals documentation shipped with the sensor or available from the Micro Motion web site ( The extended-mount electronics option allows the sensor case to be insulated without covering the transmitter, core processor, or junction box, but does not affect temperature ratings. For the purposes of selecting electronics options, this graph should be used only as a general guide. If your process conditions are close to the gray areas, it may be inappropriate to use electronics options other than a junction box. Consult with your Micro Motion representative. Product Data Sheet 11

12 Non-standard ELITE meters 176 (80) Gray area = Mount transmitter remotely (use junction box) 140 (60) Ambient temperature of core processor or transmitter in F ( C) 104 (40) 68 (20) 32 (0) 4 ( 20) 40 ( 40) 76 ( 60) 112 ( 80) Cryogenic models High-temperature models Super Duplex models 148 ( 100) ( 240)( 200) 238 ( 150) 148 ( 100) 58 ( 50) 40 ( 40) 32 (0) 122 (50) 176 (80) Process temperature in F ( C) 212 (100) 302 (150) 392 (200) 482 (250) 572 (300) 662 (350) Notes The sensor electronics must be maintained between 40 F ( 40 C) and +140 F (+60 C). Long-term storage of electronics at ambient temperatures below 40 F ( 40 C) is not recommended. Temperature limits may be further restricted by hazardous area approvals. Refer to the hazardous area approvals documentation shipped with the sensor or available from the Micro Motion web site ( Operating conditions: Process Process temperature effect For mass flow measurement, process temperature effect is defined as the change in sensor flow accuracy due to process temperature change away from the calibration temperature. Temperature effect can be corrected by zeroing at the process conditions. For density measurement, process temperature effect is defined as the change in sensor density accuracy due to process temperature change away from the calibration density. This effect can be corrected with a fixed meter factor. See installation manual for proper setup and configuration. Model code % of maximum flow rate per C Density accuracy per C g/cm 3 kg/m 3 CMFS010, CMFS015 ± ± ±0.015 CMFS025, CMFS040, CMFS050, CMFS075, CMFS100, CMFS150 ± ± ±0.015 CMF010 ± ± ±0.015 CMF025, CMF050, CMF100 ± ± ± ELITE Coriolis Flow and Density Meters

13 Model code % of maximum flow rate per C Density accuracy per C g/cm 3 kg/m 3 CMF200, CMF300 ± ± ±0.015 CMF400 ± ± ±0.015 CMFHC2 ± ± ±0.015 CMFHC3 ± ± ±0.015 CMFHC4 ± ± ±0.015 Process pressure effect Liquid flow (% of rate) Gas flow (% of rate) Density Model code per psi per bar per psi per bar g/cm 3 per psi kg/m 3 per bar CMFS010, CMFS015 none none none none none none CMFS025 none none none none CMFS040 none none none none CMFS050 (stainless steel) CMFS050 (nickel alloy C22) none none none none CMFS CMFS100 (stainless steel) CMFS100 (nickel alloy C22) none none none none CMFS150 (stainless steel) CMFS150 (nickel alloy C22) none none none none CMF010 none none none none none none CMF025 none none none none CMF050 none none none none CMF none none CMF CMF CMF CMFHC CMFHC CMFHC Product Data Sheet 13

14 Meter approvals and certifications Approvals and certifications Type CSA and CSA C-US ATEX IECEx NEPSI Ingress Protection Rating EMC effects Approval or certification (typical) Ambient temperature: 40 to +140 F ( 40 to +60 C) Class I, Div. 1, Groups C and D Class I, Div. 2, Groups A, B, C, and D Class II, Div.1, Groups E, F, and G 0575 Ex ib IIB/IIC T1 T4/T5/T6 Gb Ex na IIC T1-T4/T5 Gc Ex ib IIB/IIC T1 T6 Gb Ex ibd 21 T450 C-T85 C Ex na IIC T1 T6 Gc DIP A22 T (1) T1-T6 IP 66/67 for sensors and transmitters II 2G Ex ib IIB/IIC T1 T4/T5/T6 Gb II 2D Ex ib IIIC T (1) C Db IP66 II 3G Ex na IIC T1 T4/T5 Gc II 3D Ex tc IIIC T (1) C Dc IP66 Complies with EMC directive 2004/108/EC per EN Industrial Complies with NAMUR NE-21 ( ) Industry standards Type Weights and Measures for custody transfer applications: Hygienic approvals Industry standards and commercial approvals Standard MID OIML R117/R137 National Type Evaluation Program (NTEP) Measurement Canada INMETRO Brazil ASME BPE, FDA, EHEDG, 3A NAMUR: NE132 (burst pressure, sensor flange to flange length) Pressure Equipment Directive (PED) Canadian Registration Number (CRN) Dual Seal ASME B31.3 Piping SIL2 and SIL3 safety certifications Notes Detailed approval specifications, including temperature graphs for all meter configurations, can be found at the Micro Motion web site ( Approvals shown are for ELITE meters configured with a core processor for remote 4-wire connection to a Micro Motion transmitter. Meters with integral electronics may have more restrictive approvals. Refer to the Product Data Sheet for each transmitter for details. Transmitter interface A Micro Motion flowmeter system is highly customizable to provide a configuration that is tailor-fit to specific applications. 14 ELITE Coriolis Flow and Density Meters

15 Robust transmitter offerings allow a multitude of mounting options: Compact mounting integral to the sensor Field mount variants for harsh conditions Compact control room DIN rail packages for optimal locating in a control cabinet Specific fit-for-purpose solutions for two-wire connectivity or filling and dosing machinery integration. ELITE meters are available with an expansive selection of input and output connectivity options including the following: 4-20 ma HART WirelessHART EtherNet/IP FOUNDATION fieldbus PROFIBUS Modbus Other protocols may be available on request Physical specifications Materials of construction General corrosion guidelines do not account for cyclical stress, and therefore should not be relied upon when choosing a wetted material for your Micro Motion meter. Please refer to the Micro Motion Corrosion Guide for material compatibility information. Wetted part materials Stainless steel Sensor only weight Nickel Super Model code 316L 316L 32Ra 316L 15Ra 304L alloy C22 Duplex lb kg CMFS CMFS CMFS CMFS CMFS CMFS CMFS CMFS CMF CMF CMF CMF CMF CMF CMF CMFHC CMFHC CHFHC4 1, Product Data Sheet 15

16 Notes Weight specifications are based upon ASME B16.5 CL 150 flange and do not include electronics. Heat jackets and steam kits are also available. Non-wetted part materials Component Enclosure rating 316L/CF-3M stainless steel Sensor housing Optional for CMFS models 304L stainless steel Polyurethane-painted aluminum Core processor NEMA 4X (IP66/67) Junction box NEMA 4X (IP66) Model 1700/2700 transmitter NEMA 4X (IP66) Model 3700 transmitter NEMA 4X (IP66/67) Model 2400S transmitter Model 2200S transmitter NEMA 4X (IP66/67) NEMA 4X (IP66/67) Model FMT transmittter NEMA 4X (IP66/67) Optional for 32 or 64 Ra Flanges Sensor type Stainless steel 316L & cryogenic Nickel alloy C22 High pressure Hygienic Flange types ASME B16.5 weld neck flange (up to CL600) ASME B16.5 weld neck flange RTJ face (up to CL600) ASME B16.5 weld neck flange raised face (up to CL600) ASME B16.5 wafer style EN weld neck flange form B1, B2, C, D, E, N (up to PN100) JIS B2220 weld neck raised face (up to 20K) VCO, VCR swagelok compatible Hygienic tri-clamp compatible ASME B16.5 lap joint flange (up to CL900/1500) EN lap joint flange form B1 and B2 (up to PN160) JIS B2220 lap joint flange (up to 20K) ASME B16.5 weld neck flange (up to CL2500) VCO swagelok compatible EN weld neck flange type B1, B2, E (up to PN250) Hygienic tri-clamp compatible Hygienic s (tri-clamp ASME BPE) Hygienic couplings (DIN A/2A/3A; DIN11851; ISO 2852/DIN 11850; ISO 2852/ISO 1127; SMS 1145) Note For flange compatibility, please refer to the Online Store Sizing and Selection Tool at the Micro Motion web site ( 16 ELITE Coriolis Flow and Density Meters

17 Dimensions These dimensional drawings are intended to provide a basic guideline for sizing and planning. They are representative of a 316 stainless steel model fitted with ASME B16.5 CL 150 flange, and 2400 transmitter. To obtain detailed dimensional drawings, Micro Motion recommends using the Drawing Search feature on the Micro Motion web site ( Note All dimensions ±1/8 inch (±3 mm). Example dimensions for CMFS models B C D E A Dim. A Dim. B Dim. C Dim. D Dim. E Model Inch mm Inch mm Inch mm Inch mm Inch mm CMFS / / / / /16 27 CMFS / / / / /16 27 CMFS / / / / /8 41 CMFS / / / / /8 41 CMFS / / / / /8 41 CMFS / / / / CMFS / / / / CMFS / / / / Product Data Sheet 17

18 Example dimensions for CMF010 models 7-7/8 (199) 7-13/16 (197) 7-1/8 (181) 9 (229) 7/8 (23) Example dimensions CMF025 through CMF100 models A E C D B Dim. A Dim. B Dim. C Dim. D Dim. E Model Inch mm Inch mm Inch mm Inch mm Inch mm CMF / / / /16 21 CMF / / / / CMF / / / / ELITE Coriolis Flow and Density Meters

19 Example dimensions for CMF200 through CMFHC4 models A C D B E Dim. A Dim. B Dim. C Dim. D Dim. E Model Inch mm Inch mm Inch mm Inch mm Inch mm CMF / / / / /16 72 CMF / / / / /8 104 CMF / / / / /8 137 CMFHC2 42-3/ / / /8 162 CMFHC3 43-3/ / / CMFHC4 47-3/ / / /8 226 Ordering information Product code structure CMFS Sensor series Factory options Calibration Language Approvals Conduit Electronics Case Flanges Material or application Sensor size 025 M 313 N 0 A M E Z Z Product Data Sheet 19

20 Base model Model Variation CMFS010 CMFS015 CMFS025 CMFS040 CMFS050 CMFS075 CMFS100 CMFS150 CMF010 CMF025 CMF050 CMF100 CMF200 CMF300 CMF400 CMFHC2 CMFHC3 CMFHC4 Micro Motion Coriolis ELITE sensor; 1/10 to 1/6-inch (2 to 4 mm) Micro Motion Coriolis ELITE sensor; 1/6 to 1/4-inch (4 to 6 mm) Micro Motion Coriolis ELITE sensor; 1/4 to 1/2-inch (6 to 13 mm) Micro Motion Coriolis ELITE sensor; 1/4 to 1/2-inch (6 to 13 mm) Micro Motion Coriolis ELITE sensor; 1/2 to 1-inch (13 to 25 mm) Micro Motion Coriolis ELITE sensor; 1/2 to 1-inch (13 to 25 mm) Micro Motion Coriolis ELITE sensor; 1 to 2-inch (25 to 50 mm) Micro Motion Coriolis ELITE sensor; 1 to 2-inch (25 to 50 mm) Micro Motion Coriolis ELITE sensor; 1/10 to 1/6-inch (2 to 4 mm) Micro Motion Coriolis ELITE sensor; 1/4 to 1/2-inch (6 to 13 mm) Micro Motion Coriolis ELITE sensor; 1/2 to 1-inch (13 to 25 mm) Micro Motion Coriolis ELITE sensor; 1 to 2-inch (25 to 50 mm) Micro Motion Coriolis ELITE sensor; 2 to 3-inch (50 to 75 mm) Micro Motion Coriolis ELITE sensor; 3 to 4-inch (75 to 100 mm) Micro Motion Coriolis ELITE sensor; 4 to 6-inch (100 to 150 mm) Micro Motion Coriolis ELITE sensor; 6 to 8-inch (150 to 200 mm) Micro Motion Coriolis ELITE sensor; 8 to 10-inch (200 to 250 mm) Micro Motion Coriolis ELITE sensor; 10 to 16-inch (250 to 400 mm) M H P M H P M H P M M H P M M H P M H P M L H P M L H M L H M L H M L H A B M L H A B M H P A B M Y A M Y A M Notes M = 316L stainless steel L = 304L stainless steel H = Nickel alloy C22 Y = Super Duplex (UNS S32750) P = High pressure nickel alloy C22 tubes and manifolds with 316L stainless steel process connections 20 ELITE Coriolis Flow and Density Meters

21 A = High temperature 316L stainless steel B = High temperature nickel alloy C22 Process connections Model CMFS010H and Model CMFS015H (nickel alloy C22) 323 #4 VCO 316/316L Swagelok compatible 334 #4 VCO 316/316L Swagelok compatible 1/4" NPT female adapter 520 1/2-inch CL150 ASME B16.5 F304/F304L Lap joint flange N06022 stub 521 1/2-inch CL300 ASME B16.5 F304/F304L Lap joint flange N06022 stub mm 10K JIS B 2220 F304/F304L Lap joint flange N06022 stub 523 DN15 PN40 DIN 2656 F304/F304L Lap joint flange Form C face, N06022 stub 524 DN15 PN40 EN F304/F304L Lap joint flange Type B1, N06022 stub Model CMFS010M and CMFS015M (316L stainless steel) 172 DN25 PN40 EN F316/F316L Weld neck flange Type B1 176 DN15 PN40 EN F316/F316L Weld neck flange Type B1 177 DN15 PN100 EN F316/F316L Weld neck flange Type B2 178 DN15 PN100 EN F316/F316L Weld neck flange Type D 183 DN25 PN40 EN F316/F316L Weld neck flange Type D 300 DN15 PN40 DIN 2635 F316/F316L Weld neck flange Form C face 301 DN15 PN40 DIN 2635 F316/F316L Weld neck flange Form N grooved face 302 DN15 PN100 DIN 2637 F316/F316L Weld neck flange Form E face 303 DN15 PN100 DIN 2637 F316/F316L Weld neck flange Form N grooved face mm 10K JIS B 2220 F316/F316L Weld neck flange Raised face mm 20K JIS B 2220 F316/F316L Weld neck flange Raised face 310 DN15 PN40 EN F316/F316L Weld neck flange Type D 313 1/2" CL150 ASME B16.5 F316/F316L Weld neck flange Raised face 314 1/2" CL300 ASME B16.5 F316/F316L Weld neck flange Raised face 315 1/2" CL600 ASME B16.5 F316/F316L Weld neck flange Raised face 319 #8 VCO 316/316L Weld neck flange 1/2" 316 NPT female adapter 321 (1) 1/2" Tri-Clamp compatible 316L Hygienic (1) Sensor is 3A authorized but not EHEDG certified when ordered with code 321. Product Data Sheet 21

22 323 #4 VCO 316/316L Swagelok compatible 324 #4 VCO 316/316L Swagelok compatible 325 #4 VCO 316/316L Swagelok compatible 334 #4 VCO 316/316L Swagelok compatible 335 #8 VCO 316/316L Swagelok compatible 344 (2) 3/4" Tri-Clamp compatible 345 (3) DN10 ISO 2852/ISO (4) DN15 ISO 2852/DIN L 316L 316L Hygienic Hygienic Hygienic 1/4" NPT female adapter 1/4" tube compression adapter 6mm tube compression adapter Model CMFS010P and Model CMFS015P (high pressure) 150 1/2" CL900/1500 ASME B16.5 F316/F316L Weld neck flange Raised face 191 1/2" CL2500 ASME B16.5 F316/F316L Weld neck flange Raised face 319 #8 VCO 316/316L Weld neck flange 1/2" 316 NPT female adapter 323 #4 VCO 316/316L Swagelok compatible 324 #4 VCO 316/316L Swagelok compatible 325 #4 VCO 316/316L Swagelok compatible 334 #4 VCO 316/316L Swagelok compatible 335 #8 VCO 316/316L Swagelok compatible Model CMFS025H and CMFS050H (nickel alloy C22) 1/4" NPT female adapter 1/4" tube compression adapter 6mm tube compression adapter 520 1/2-inch CL150 ASME B16.5 F304/F304L Lap joint flange N06022 stub 521 1/2-inch CL300 ASME B16.5 F304/F304L Lap joint flange N06022 stub mm 10K JIS B 2220 F304/F304L Lap joint flange N06022 stub (2) Sensor is 3A authorized and EHEDG certified when ordered with code 344. (3) Sensor is 3A authorized and EHEDG certified when ordered with code 345. (4) Sensor is 3A authorized and EHEDG certified when ordered with code ELITE Coriolis Flow and Density Meters

23 523 DN15 PN40 DIN 2656 F304/F304L Lap joint flange Form C face, N06022 stub 524 DN15 PN40 EN F304/F304L Lap joint flange Type B1, N06022 stub Model CMFS025M, CMFS040M, and CMFS050M (316L stainless steel) 172 DN25 PN40 EN F316/F316L Weld neck flange Type B1 176 DN15 PN40 EN F316/F316L Weld neck flange Type B1 177 DN15 PN100 EN F316/F316L Weld neck flange Type B2 178 DN15 PN100 EN F316/F316L Weld neck flange Type D 323 #4 VCO 316/316L Swagelok compatible 1/4" NPT female adapter 300 DN15 PN40 DIN 2635 F316/F316L Weld neck flange Form C face 301 DN15 PN40 DIN 2635 F316/F316L Weld neck flange Form N grooved face 302 DN15 PN100 DIN 2637 F316/F316L Weld neck flange Form E face 303 DN15 PN100 DIN 2637 F316/F316L Weld neck flange Form N grooved face mm 10K JIS B 2220 F316/F316L Weld neck flange Raised face mm 20K JIS B 2220 F316/F316L Weld neck flange Raised face 310 DN15 PN40 EN F316/F316L Weld neck flange Type D 313 1/2" CL150 ASME B16.5 F316/F316L Weld neck flange Raised face 314 1/2" CL300 ASME B16.5 F316/F316L Weld neck flange Raised face 315 1/2" CL600 ASME B16.5 F316/F316L Weld neck flange Raised face 319 #8 VCO 316/316L Weld neck flange 1/2" 316 NPT female adapter 321 (5) 1/2" Tri-Clamp compatible 322 3/4" Tri-Clamp compatible 316L 316L Hygienic Hygienic 335 #8 VCO 316/316L Swagelok compatible 336 (6) #12 VCO 316/316L Swagelok compatible 339 1" Tri-Clamp compatible Model CMFS025P and CMFS050P (high pressure) 316L Hygienic 150 1/2" CL900/1500 ASME B16.5 F316/F316L Weld neck flange Raised face 170 DN15 PN100/160 EN F316/F316L Weld neck flange Type B2 184 DN15 PN250 EN F316/F316L Weld neck flange Type B2 (5) Sensor is 3A authorized but not EHEDG certified when ordered with code 321. Product Data Sheet 23

24 319 #8 VCO 316/316L Weld neck flange 1/2" 316 NPT female adapter 335 #8 VCO 316/316L Swagelok compatible 336 (7) #12 VCO 316/316L Swagelok compatible Model CMFS075M, CMFS100M, and CMFS150M (316L stainless steel) 179 DN25 PN40 EN F316/F316L Weld neck flange Type B1 180 DN25 PN100 EN F316/F316L Weld neck flange Type B2 181 DN25 PN100 EN F316/F316L Weld neck flange Type D 306 DN25 PN40 DIN 2635 F316/F316L Weld neck flange Form C face 307 DN25 PN40 DIN 2635 F316/F316L Weld neck flange Form N grooved face 308 DN25 PN100 DIN 2637 F316/F316L Weld neck flange Form E face 309 DN25 PN100 DIN 2637 F316/F316L Weld neck flange Form N grooved face 311 DN25 PN40 EN F316/F316L Weld neck flange Type D 312 DN40 PN40 EN F316/F316L Weld neck flange Type D 316 DN50 PN40 EN F316/F316L Weld neck flange Type D mm 10K JIS B 2220 F316/F316L Weld neck flange Raised face mm 20K JIS B 2220 F316/F316L Weld neck flange Raised face 322 3/4" Tri-Clamp compatible 316L Hygienic 328 1" CL150 ASME B16.5 F316/F316L Weld neck flange Raised face 329 1" CL300 ASME B16.5 F316/F316L Weld neck flange Raised face 330 1" CL600 ASME B16.5 F316/F316L Weld neck flange Raised face /2" CL600 ASME B16.5 F316/F316L Weld neck flange Raised face 336 (8) #12 VCO 316/316L Swagelok compatible 339 1" Tri-Clamp compatible 316L Hygienic /2-inch CL150 ASME B16.5 F316/F316L Weld neck flange Raised face /2-inch CL300 ASME B16.5 F316/F316L Weld neck flange Raised face /2-inch CL600 ASME B16.5 F316/F316L Weld neck flange Raised face 351 (9) 1-1/2-inch Tri-Clamp compatible 316L Hygienic (6) Fitting code 336 is available only on models CMFS050 and CMFS075. (7) Fitting code 336 is available only on models CMFS050 and CMFS075. (8) Fitting code 336 is available only on models CMFS050 and CMFS075. (9) Fitting code 351 is not available with high temperature models (base model variation code A), if applicable. 24 ELITE Coriolis Flow and Density Meters

25 352 (10) 2-inch Tri-Clamp compatible 316L Hygienic 363 DN40 PN100 EN F316/F316L Weld neck flange Type B2 365 DN50 PN100 EN F316/F316L Weld neck flange Type B2 366 DN40 PN100 EN F316/F316L Weld neck flange Type D 367 DN50 PN100 EN F316/F316L Weld neck flange Type D 368 DN40 PN40 EN F316/F316L Weld neck flange Type B1 369 DN50 PN40 EN F316/F316L Weld neck flange Type B1 377 DN40 PN100 DIN 2637 F316/F316L Weld neck flange Form E face 378 DN50 PN100 DIN 2637 F316/F316L Weld neck flange Form E face 379 DN40 PN100 DIN 2637 F316/F316L Weld neck flange Form N grooved face 380 DN50 PN100 DIN 2637 F316/F316L Weld neck flange Form N grooved face 381 DN40 PN40 DIN 2635 F316/F316L Weld neck flange Form C face 382 DN50 PN40 DIN 2635 F316/F316L Weld neck flange Form C face 383 DN40 PN40 DIN 2635 F316/F316L Weld neck flange Form N grooved face 384 DN50 PN40 DIN 2635 F316/F316L Weld neck flange Form N grooved face mm 10K JIS B 2220 F316/F316L Weld neck flange Raised face mm 20K JIS B 2220 F316/F316L Weld neck flange Raised face inch CL150 ASME B16.5 F316/F316L Weld neck flange Raised face inch CL300 ASME B16.5 F316/F316L Weld neck flange Raised face inch CL600 ASME B16.5 F316/F316L Weld neck flange Raised face Model CMFS100H and CMFS150H (nickel alloy C22) mm 10K JIS B 2220 F304/F304L Lap joint flange N06022 stub 534 DN25 PN40 EN F304/F304L Lap joint flange Type B1, N06022 stub /2" CL600 ASME B16.5 F304/F304L Lap joint flange N06022 stub /2" CL150 ASME B16.5 F304/F304L Lap joint flange N06022 stub /2" CL300 ASME B16.5 F304/F304L Lap joint flange N06022 stub mm 10K JIS B 2220 F304/F304L Lap joint flange N06022 stub 543 DN40 PN40 DIN 2656 F304/F304L Lap joint flange Form C face, N06022 stub 544 2" CL150 ASME B16.5 F304/F304L Lap joint flange N06022 stub 545 2" CL300 ASME B16.5 F304/F304L Lap joint flange N06022 stub mm 10K JIS B 2220 F304/F304L Lap joint flange N06022 stub 547 DN50 PN40 DIN 2656 F304/F304L Lap joint flange Form C face, N06022 stub 548 DN40 PN40 EN F304/F304L Lap joint flange Type B1, N06022 stub (10) Fitting code 352 is not available with high temperature models (base model variation code A), if applicable. Product Data Sheet 25

26 549 DN50 PN40 EN F304/F304L Lap joint flange Type B1, N06022 stub Model CMFS100P and CMFS150P (high pressure) 180 DN25 PN100 EN F316/F316L Weld neck flange Type B2 185 DN25 PN250 EN F316/F316L Weld neck flange Type B2 362 DN40 PN250 EN F316/F316L Weld neck flange Type B2 364 DN40 PN160 EN F316/F316L Weld neck flange Type B2 370 DN50 PN160 EN F316/F316L Weld neck flange Type B2 483 DN50 PN250 EN F316/F316L Weld neck flange Type B2 Model CMF010H (nickel alloy C22) 323 #4 VCO 316/316L Swagelok compatible 334 #4 VCO 316/316L Swagelok compatible 1/4" NPT female adapter 520 1/2-inch CL150 ASME B16.5 F304/F304L Lap joint flange N06022 stub 521 1/2-inch CL300 ASME B16.5 F304/F304L Lap joint flange N06022 stub mm 10K JIS B 2220 F304/F304L Lap joint flange N06022 stub 523 DN15 PN40 DIN 2656 F304/F304L Lap joint flange Form C face, N06022 stub 524 DN15 PN40 EN F304/F304L Lap joint flange Type B1, N06022 stub Model CMF010L, CMF025L, and CMF050L (304L stainless steel) 413 1/2" CL150 ASME B16.5 F304/F304L Weld neck flange Raised face 414 1/2" CL300 ASME B16.5 F304/F304L Weld neck flange Raised face 421 DN15 PN40 EN F304/F304L Weld neck flange Type B1 423 DN15 PN40 DIN 2526 F304/F304L Weld neck flange Form C face Model CMF010M (316L stainless steel) 172 DN25 PN40 EN F316/F316L Weld neck flange Type B1 176 DN15 PN40 EN F316/F316L Weld neck flange Type B1 177 DN15 PN100 EN F316/F316L Weld neck flange Type B2 178 DN15 PN100 EN F316/F316L Weld neck flange Type D 183 DN25 PN40 EN F316/F316L Weld neck flange Type D 300 DN15 PN40 DIN 2635 F316/F316L Weld neck flange Form C face 302 DN15 PN100 DIN 2637 F316/F316L Weld neck flange Form E face mm 10K JIS B 2220 F316/F316L Weld neck flange Raised face 26 ELITE Coriolis Flow and Density Meters

27 305 15mm 20K JIS B 2220 F316/F316L Weld neck flange Raised face 310 DN15 PN40 EN F316/F316L Weld neck flange Type D 313 1/2" CL150 ASME B16.5 F316/F316L Weld neck flange Raised face 314 1/2" CL300 ASME B16.5 F316/F316L Weld neck flange Raised face 315 1/2" CL600 ASME B16.5 F316/F316L Weld neck flange Raised face 321 (11) 1/2" Tri-Clamp compatible 316L Hygienic 323 #4 VCO 316/316L Swagelok compatible 324 #4 VCO 316/316L Swagelok compatible 325 #4 VCO 316/316L Swagelok compatible 334 #4 VCO 316/316L Swagelok compatible Model CMF010P (high pressure) 1/4" NPT female adapter 1/4" tube compression adapter 6mm tube compression adapter 323 #4 VCO 316/316L Swagelok compatible 324 #4 VCO 316/316L Swagelok compatible 325 #4 VCO 316/316L Swagelok compatible 334 #4 VCO 316/316L Swagelok compatible 1/4" NPT female adapter 1/4" tube compression adapter 6mm tube compression adapter Model CMF025H (nickel alloy C22) 520 1/2-inch CL150 ASME B16.5 F304/F304L Lap joint flange N06022 stub 521 1/2-inch CL300 ASME B16.5 F304/F304L Lap joint flange N06022 stub mm 10K JIS B 2220 F304/F304L Lap joint flange N06022 stub 523 DN15 PN40 DIN 2656 F304/F304L Lap joint flange Form C face, N06022 stub 524 DN15 PN40 EN F304/F304L Lap joint flange Type B1, N06022 stub Model CMF025M (316L stainless steel) 009 1/2" CL150/300 bolt kit ASME B16.5 F316/F316L Wafer style flange (11) Sensor is 3A authorized but not EHEDG certified when ordered with code 321. Product Data Sheet 27

28 016 DN15 PN40 bolt kit DIN 2526 F316/F316L Wafer style flange Form C face 017 DN15 PN40 bolt kit DIN 2512 F316/F316L Wafer style flange Form N grooved face 018 DN15 PN100 bolt kit DIN 2526 F316/F316L Wafer style flange Form E face 019 DN15 PN100 bolt kit DIN 2512 F316/F316L Wafer style flange Form N grooved face mm 10K/20K bolt kit JIS B 2220 F316/F316L Wafer style flange 172 DN25 PN40 EN F316/F316L Weld neck flange Type B1 176 DN15 PN40 EN F316/F316L Weld neck flange Type B1 177 DN15 PN100 EN F316/F316L Weld neck flange Type B2 178 DN15 PN100 EN F316/F316L Weld neck flange Type D 323 #4 VCO 316/316L Swagelok compatible 1/4" NPT female adapter 300 DN15 PN40 DIN 2635 F316/F316L Weld neck flange Form C face 301 DN15 PN40 DIN 2635 F316/F316L Weld neck flange Form N grooved face 302 DN15 PN100 DIN 2637 F316/F316L Weld neck flange Form E face 303 DN15 PN100 DIN 2637 F316/F316L Weld neck flange Form N grooved face mm 10K JIS B 2220 F316/F316L Weld neck flange Raised face mm 20K JIS B 2220 F316/F316L Weld neck flange Raised face 310 DN15 PN40 EN F316/F316L Weld neck flange Type D 313 1/2" CL150 ASME B16.5 F316/F316L Weld neck flange Raised face 314 1/2" CL300 ASME B16.5 F316/F316L Weld neck flange Raised face 315 1/2" CL600 ASME B16.5 F316/F316L Weld neck flange Raised face 319 #8 VCO 316/316L Weld neck flange 1/2" 316 NPT female adapter 321 (12) 1/2" Tri-Clamp compatible 316L Hygienic 335 #8 VCO 316/316L Swagelok compatible Model CMF050H (nickel alloy C22) 521 1/2-inch CL300 ASME B16.5 F304/F304L Lap joint flange N06022 stub mm 10K JIS B 2220 F304/F304L Lap joint flange N06022 stub 523 DN15 PN40 DIN 2656 F304/F304L Lap joint flange Form C face, N06022 stub 524 DN15 PN40 EN F304/F304L Lap joint flange Type B1, N06022 stub (12) Sensor is 3A authorized but not EHEDG certified when ordered with code ELITE Coriolis Flow and Density Meters

29 Model CMF050M (316L stanless steel) 009 1/2" CL150/300 bolt kit ASME B16.5 F316/F316L Wafer style flange 016 DN15 PN40 bolt kit DIN 2526 F316/F316L Wafer style flange Form C face 017 DN15 PN40 bolt kit DIN 2512 F316/F316L Wafer style flange Form N grooved face 018 DN15 PN100 bolt kit DIN 2526 F316/F316L Wafer style flange Form E face 019 DN15 PN100 bolt kit DIN 2512 F316/F316L Wafer style flange Form N grooved face mm 10K/20K bolt kit JIS B 2220 F316/F316L Wafer style flange 172 DN25 PN40 EN F316/F316L Weld neck flange Type B1 176 DN15 PN40 EN F316/F316L Weld neck flange Type B1 177 DN15 PN100 EN F316/F316L Weld neck flange Type B2 178 DN15 PN100 EN F316/F316L Weld neck flange Type D 183 DN25 PN40 EN F316/F316L Weld neck flange Type D 300 DN15 PN40 DIN 2635 F316/F316L Weld neck flange Form C face 301 DN15 PN40 DIN 2635 F316/F316L Weld neck flange Form N grooved face 302 DN15 PN100 DIN 2637 F316/F316L Weld neck flange Form E face 303 DN15 PN100 DIN 2637 F316/F316L Weld neck flange Form N grooved face mm 10K JIS B 2220 F316/F316L Weld neck flange Raised face mm 20K JIS B 2220 F316/F316L Weld neck flange Raised face 310 DN15 PN40 EN F316/F316L Weld neck flange Type D 313 1/2" CL150 ASME B16.5 F316/F316L Weld neck flange Raised face 314 1/2" CL300 ASME B16.5 F316/F316L Weld neck flange Raised face 315 1/2" CL600 ASME B16.5 F316/F316L Weld neck flange Raised face 320 #12 VCO 316/316L Swagelok compatible 322 3/4" Tri-Clamp compatible 316L Hygienic 336 (13) #12 VCO 316/316L Swagelok compatible Model CMF100H (nickel alloy C22) 3/4" NPT female adapter 530 1" CL150 ASME B16.5 F304/F304L Lap joint flange N06022 stub 531 1" CL300 ASME B16.5 F304/F304L Lap joint flange N06022 stub mm 10K JIS B 2220 F304/F304L Lap joint flange N06022 stub 533 DN25 PN40 DIN 2656 F304/F304L Lap joint flange Form C face, N06022 stub 534 DN25 PN40 EN F304/F304L Lap joint flange Type B1, N06022 stub (13) Fitting code 336 is available only on models CMFS050 and CMFS075. Product Data Sheet 29

30 Model CMF100L (304L stainless steel) 415 1" CL150 ASME B16.5 F304/F304L Weld neck flange Raised face 416 1" CL300 ASME B16.5 F304/F304L Weld neck flange Raised face 422 DN25 PN40 EN F304/F304L Weld neck flange Type B1 424 DN25 PN40 DIN 2526 F304/F304L Weld neck flange Form C face Model CMF100M (316L stainless steel) 010 1" CL150 bolt kit ASME B16.5 F316/F316L Wafer style flange 011 1" CL300/600 bolt kit ASME B16.5 F316/F316L Wafer style flange 020 DN25 PN40 bolt kit DIN 2526 F316/F316L Wafer style flange Form C face 021 DN25 PN40 bolt kit DIN 2512 F316/F316L Wafer style flange Form N grooved face 022 DN25 PN100 bolt kit DIN 2526 F316/F316L Wafer style flange Form E face 179 DN25 PN40 EN F316/F316L Weld neck flange Type B1 180 DN25 PN100 EN F316/F316L Weld neck flange Type B2 181 DN25 PN100 EN F316/F316L Weld neck flange Type D 306 DN25 PN40 DIN 2635 F316/F316L Weld neck flange Form C face 307 DN25 PN40 DIN 2635 F316/F316L Weld neck flange Form N grooved face 308 DN25 PN100 DIN 2637 F316/F316L Weld neck flange Form E face 309 DN25 PN100 DIN 2637 F316/F316L Weld neck flange Form N grooved face 311 DN25 PN40 EN F316/F316L Weld neck flange Type D mm 10K JIS B 2220 F316/F316L Weld neck flange Raised face mm 20K JIS B 2220 F316/F316L Weld neck flange Raised face 328 1" CL150 ASME B16.5 F316/F316L Weld neck flange Raised face 329 1" CL300 ASME B16.5 F316/F316L Weld neck flange Raised face /2" CL600 ASME B16.5 F316/F316L Weld neck flange Raised face 339 1" Tri-Clamp compatible 316L Hygienic Model CMF200H and Model CMF200B (standard or high temperature nickel alloy C22) /2" CL150 ASME B16.5 F304/F304L Lap joint flange N06022 stub /2" CL300 ASME B16.5 F304/F304L Lap joint flange N06022 stub mm 10K JIS B 2220 F304/F304L Lap joint flange N06022 stub 543 DN40 PN40 DIN 2656 F304/F304L Lap joint flange Form C face, N06022 stub 544 2" CL150 ASME B16.5 F304/F304L Lap joint flange N06022 stub 545 2" CL300 ASME B16.5 F304/F304L Lap joint flange N06022 stub mm 10K JIS B 2220 F304/F304L Lap joint flange N06022 stub 30 ELITE Coriolis Flow and Density Meters

31 547 DN50 PN40 DIN 2656 F304/F304L Lap joint flange Form C face, N06022 stub 548 DN40 PN40 EN F304/F304L Lap joint flange Type B1, N06022 stub 549 DN50 PN40 EN F304/F304L Lap joint flange Type B1, N06022 stub Model CMF200L (304L stainless steel) /2" CL150 ASME B16.5 F304/F304L Weld neck flange Raised face /2" CL300 ASME B16.5 F304/F304L Weld neck flange Raised face 457 DN40 PN40 EN F304/F304L Weld neck flange Type B1 458 DN50 PN40 EN F304/F304L Weld neck flange Type B1 481 DN40 PN40 DIN 2526 F304/F304L Weld neck flange Form C face 482 DN50 PN40 DIN 2526 F304/F304L Weld neck flange Form C face inch CL150 ASME B16.5 F304/F304L Weld neck flange Raised face inch CL300 ASME B16.5 F304/F304L Weld neck flange Raised face Model CMF200M and Model CMF200A (standard or high temperature 316L stainless steel) 312 DN40 PN40 EN F316/F316L Weld neck flange Type D 316 DN50 PN40 EN F316/F316L Weld neck flange Type D /2-inch CL150 ASME B16.5 F316/F316L Weld neck flange Raised face /2-inch CL300 ASME B16.5 F316/F316L Weld neck flange Raised face /2-inch CL600 ASME B16.5 F316/F316L Weld neck flange Raised face 351 (14) 1-1/2-inch Tri-Clamp compatible 352 (15) 2-inch Tri-Clamp compatible 316L 316L Hygienic Hygienic 363 DN40 PN100 EN F316/F316L Weld neck flange Type B2 366 DN40 PN100 EN F316/F316L Weld neck flange Type D 367 DN50 PN100 EN F316/F316L Weld neck flange Type D 368 DN40 PN40 EN F316/F316L Weld neck flange Type B1 369 DN50 PN40 EN F316/F316L Weld neck flange Type B1 377 DN40 PN100 DIN 2637 F316/F316L Weld neck flange Form E face 378 DN50 PN100 DIN 2637 F316/F316L Weld neck flange Form E face 379 DN40 PN100 DIN 2637 F316/F316L Weld neck flange Form N grooved face 380 DN50 PN100 DIN 2637 F316/F316L Weld neck flange Form N grooved face 381 DN40 PN40 DIN 2635 F316/F316L Weld neck flange Form C face 382 DN50 PN40 DIN 2635 F316/F316L Weld neck flange Form C face (14) Fitting code 351 is not available with high temperature models (base model variation code A), if applicable. Product Data Sheet 31

32 383 DN40 PN40 DIN 2635 F316/F316L Weld neck flange Form N grooved face 384 DN50 PN40 DIN 2635 F316/F316L Weld neck flange Form N grooved face mm 10K JIS B 2220 F316/F316L Weld neck flange Raised face mm 20K JIS B 2220 F316/F316L Weld neck flange Raised face inch CL150 ASME B16.5 F316/F316L Weld neck flange Raised face inch CL300 ASME B16.5 F316/F316L Weld neck flange Raised face inch CL600 ASME B16.5 F316/F316L Weld neck flange Raised face Model CMF300H and Model CMF300B (standard or high temperature nickel alloy C22) 550 3" CL150 ASME B16.5 F304/F304L Lap joint flange N06022 stub 551 3" CL300 ASME B16.5 F304/F304L Lap joint flange N06022 stub mm 10K JIS B 2220 F304/F304L Lap joint flange N06022 stub 553 DN80 PN40 DIN 2656 F304/F304L Lap joint flange Form C face, N06022 stub 554 DN80 PN40 EN F304/F304L Lap joint flange Type B1, N06022 stub Model CMF300L (304L stainless steel) 455 3" CL150 ASME B16.5 F304/F304L Weld neck flange Raised face 456 3" CL300 ASME B16.5 F304/F304L Weld neck flange Raised face 459 DN80 PN40 EN F304/F304L Weld neck flange Type B1 491 DN80 PN40 DIN 2526 F304/F304L Weld neck flange Form C face Model CMF300M and Model CMF300A (standard or high temperature 316L stainless steel) 326 DN80 PN40 EN F316/F316L Weld neck flange Type D 333 DN100 PN40 EN F316/F316L Weld neck flange Type D 355 3" CL150 ASME B16.5 F316/F316L Weld neck flange Raised face 356 3" CL300 ASME B16.5 F316/F316L Weld neck flange Raised face 357 3" CL600 ASME B16.5 F316/F316L Weld neck flange Raised face 358 (16) 3" CL900 ASME B16.5 F316/F316L Weld neck flange Raised face 359 DN100 PN100 EN F316/F316L Weld neck flange Type D 361 3" Tri-Clamp compatible 316L Hygienic 371 DN80 PN40 EN F316/F316L Weld neck flange Type B1 372 DN100 PN40 EN F316/F316L Weld neck flange Type B1 373 DN80 PN100 EN F316/F316L Weld neck flange Type B2 (15) Fitting code 352 is not available with high temperature models (base model variation code A), if applicable. 32 ELITE Coriolis Flow and Density Meters

33 374 DN100 PN100 EN F316/F316L Weld neck flange Type B2 375 DN80 PN100 EN F316/F316L Weld neck flange Type D 391 DN80 PN40 DIN 2635 F316/F316L Weld neck flange Form C face 392 DN100 PN40 DIN 2635 F316/F316L Weld neck flange Form C face 393 DN80 PN40 DIN 2635 F316/F316L Weld neck flange Form N grooved face 394 DN100 PN40 DIN 2635 F316/F316L Weld neck flange Form N grooved face 395 DN80 PN100 DIN 2637 F316/F316L Weld neck flange Form E face 397 DN80 PN100 DIN 2637 F316/F316L Weld neck flange Form N grooved face 398 DN100 PN100 DIN 2637 F316/F316L Weld neck flange Form N grooved face mm 10K JIS B 2220 F316/F316L Weld neck flange Raised face mm 20K JIS B 2220 F316/F316L Weld neck flange Raised face 425 4" CL150 ASME B16.5 F316/F316L Weld neck flange Raised face 426 4" CL300 ASME B16.5 F316/F96316L Weld neck flange Raised face 427 4" CL600 ASME B16.5 F316/F316L Weld neck flange Raised face 428 (17) 4" CL900 ASME B16.5 F316/F316L Weld neck flange Raised face Model CMF400H and Model CMF400B (standard or high temperature nickel alloy C22) 906 DN100 PN40 EN N06022 Weld neck flange Type B " CL150 ASME B16.5 F304/F304L Lap joint flange N06022 stub 908 DN100 PN100 EN F304/F304L Lap joint flange Type B2 910 DN100 PN160 EN F304/F304L Lap joint flange Type B " CL150 ASME B16.5 N06022 Weld neck flange Raised face 912 4" CL300 ASME B16.5 N06022 Weld neck flange Raised face 913 4" CL600 ASME B16.5 N06022 Weld neck flange Raised face 914 4" CL900 ASME B16.5 N06022 Weld neck flange Raised face Model CMF400M and Model CMF400A (standard or high temperature 316L stainless steel) 435 4" CL150 ASME B16.5 F316/F316L Weld neck flange Raised face 436 4" CL300 ASME B16.5 F316/F316L Weld neck flange Raised face 437 4" CL600 ASME B16.5 F316/F316L Weld neck flange Raised face 438 (18) 4" CL900 ASME B16.5 F316/F316L Weld neck flange Raised face 443 DN100 PN40 EN F316/F316L Weld neck flange Type B1 444 DN150 PN40 EN F316/F316L Weld neck flange Type B1 445 DN100 PN100 EN F316/F316L Weld neck flange Type B2 (16) Fitting code 358 is available only for Model CMF300A. (17) Fitting code 428 is available only for model CMF300A. Product Data Sheet 33

34 446 DN150 PN100 EN F316/F316L Weld neck flange Type B2 447 DN100 PN100 EN F316/F316L Weld neck flange Type D 448 DN150 PN100 EN F316/F316L Weld neck flange Type D 451 6" CL150 ASME B16.5 F316/F316L Weld neck flange Raised face 452 6" CL300 ASME B16.5 F316/F316L Weld neck flange Raised face 453 6" CL600 ASME B16.5 F316/F316L Weld neck flange Raised face 460 DN100 PN40 DIN 2635 F316/F316L Weld neck flange Form C face 461 DN150 PN40 DIN 2635 F316/F316L Weld neck flange Form C face 462 DN100 PN40 DIN 2635 F316/F316L Weld neck flange Form N grooved face 463 DN150 PN40 DIN 2635 F316/F316L Weld neck flange Form N grooved face 464 DN100 PN100 DIN 2637 F316/F316L Weld neck flange Form E face 465 DN150 PN100 DIN 2637 F316/F316L Weld neck flange Form E face 466 DN100 PN100 DIN 2637 F316/F316L Weld neck flange Form N grooved face 467 DN150 PN100 DIN 2637 F316/F316L Weld neck flange Form N grooved face mm 10K JIS B 2220 F316/F316L Weld neck flange Raised face mm 20K JIS B 2220 F316/F316L Weld neck flange Raised face 478 DN150 PN40 EN F316/F316L Weld neck flange Type D 480 DN100 PN40 EN F316/F316L Weld neck flange Type D Model CMF400P (high pressure) 437 4" CL600 ASME B16.5 F316/F316L Weld neck flange Raised face 438 (19) 4" CL900 ASME B16.5 F316/F316L Weld neck flange Raised face 439 4" CL1500 ASME B16.5 F316/F316L Weld neck flange Raised face 445 DN100 PN100 EN F316/F316L Weld neck flange Type B2 446 DN150 PN100 EN F316/F316L Weld neck flange Type B2 447 DN100 PN100 EN F316/F316L Weld neck flange Type D 448 DN150 PN100 EN F316/F316L Weld neck flange Type D 453 6" CL600 ASME B16.5 F316/F316L Weld neck flange Raised face 468 DN100 PN160 EN F316/F316L Weld neck flange Type B mm 20K JIS B 2220 F316/F316L Weld neck flange Raised face mm 20K JIS B 2220 F316/F316L Weld neck flange Raised face 562 4" CL600 ASME B16.5 A105 Carbon Steel 563 4" CL900 ASME B16.5 A105 Carbon Steel Lap joint flange Lap joint flange 316/316L stub 316/316L stub (18) Fitting code 438 is available only for Model CMF400A. (19) Fitting code 438 is available only for Model CMF400A. 34 ELITE Coriolis Flow and Density Meters

35 Model CMFHC2M and Model CMFHC2A (standard or high temperature 316L stainless steel) 451 6" CL150 ASME B16.5 F316/F316L Weld neck flange Raised face 452 6" CL300 ASME B16.5 F316/F316L Weld neck flange Raised face 453 6" CL600 ASME B16.5 F316/F316L Weld neck flange Raised face 801 EN DN200 PN40 F316/F316L Weld neck flange Type B1 802 EN DN200 PN100 F316/F316L Weld neck flange Type B2 803 EN DN200 PN160 F316/F316L Weld neck flange Type B2 810 ASME B inch CL150 F316/F316L Weld neck flange Raised face 811 ASME B inch CL300 F316/F316L Weld neck flange Raised face 818 ASME B inch CL600 F316/F316L Weld neck flange Raised face 819 ASME B inch CL900 F316/F316L Weld neck flange Raised face 821 ASME B inch CL900 F316/F316L Weld neck flange Raised face 822 EN DN150 PN40 F316/F316L Weld neck flange Type B1 823 EN DN150 PN100 F316/F316L Weld neck flange Type B2 824 EN DN150 PN160 F316/F316L Weld neck flange Type B2 Model CMFHC2Y (Super Duplex UNS S32750) 956 EN DN200 PN40 Super duplex Weld neck flange Type B1 957 EN DN200 PN100 Super duplex Weld neck flange Type B2 958 EN DN200 PN160 Super duplex Weld neck flange Type B2 959 EN DN150 PN40 Super duplex Weld neck flange Type B1 960 EN DN150 PN100 Super duplex Weld neck flange Type B2 961 EN DN150 PN160 Super duplex Weld neck flange Type B2 962 ASME B inch CL150 Super duplex Weld neck flange Raised face 963 ASME B inch CL300 Super duplex Weld neck flange Raised face 964 ASME B inch CL600 Super duplex Weld neck flange Raised face 965 ASME B inch CL900 Super duplex Weld neck flange Raised face 966 ASME B inch CL150 Super duplex Weld neck flange Raised face 967 ASME B inch CL300 Super duplex Weld neck flange Raised face 968 ASME B inch CL600 Super duplex Weld neck flange Raised face 969 ASME B inch CL900 Super duplex Weld neck flange Raised face Model CMFHC3M and Model CMFHC3A (standard or high temperature 316L stainless steel) 801 EN DN200 PN40 F316/F316L Weld neck flange Type B1 802 EN DN200 PN100 F316/F316L Weld neck flange Type B2 803 EN DN200 PN160 F316/F316L Weld neck flange Type B2 804 EN DN250 PN40 F316/F316L Weld neck flange Type B1 Product Data Sheet 35

36 805 EN DN250 PN100 F316/F316L Weld neck flange Type B2 806 EN DN250 PN160 F316/F316L Weld neck flange Type B2 810 ASME B inch CL150 F316/F316L Weld neck flange Raised face 811 ASME B inch CL300 F316/F316L Weld neck flange Raised face 812 ASME B inch CL600 A105 Carbon Steel Lap joint flange 316/316L stub 813 ASME B inch CL150 F316/F316L Weld neck flange Raised face 814 ASME B inch CL300 F316/F316L Weld neck flange Raised face 815 ASME B inch CL600 F316/F316L Weld neck flange Raised face 816 ASME B inch CL600 A105 Carbon Steel Lap joint flange 316/316L stub 817 ASME B inch CL600 F316/F316L Weld neck flange Raised face 818 ASME B inch CL600 F316/F316L Weld neck flange Raised face 819 ASME B inch CL900 F316/F316L Weld neck flange Raised face 820 ASME B inch CL900 F316/F316L Weld neck flange Raised face Model CMFHC3Y (Super Duplex UNS S32750) 825 Super duplex 826 Super duplex 827 Super duplex 828 Super duplex 829 Super duplex 830 Super duplex 831 Super duplex 832 Super duplex 833 Super duplex 834 Super duplex 836 Super duplex 837 Super duplex 838 Super duplex DN200 PN40 EN Weld neck flange Type B1 DN200 PN100 EN Weld neck flange Type B2 DN200 PN160 EN Weld neck flange Type B2 DN250 PN40 EN Weld neck flange Type B1 DN250 PN100 EN Weld neck flange Type B2 DN250 PN160 EN Weld neck flange Type B2 8-inch CL150 ASME B16.5 Weld neck flange Raised face 8-inch CL300 ASME B16.5 Weld neck flange Raised face 8-inch CL600 ASME B16.5 Weld neck flange Raised face 8-inch CL900 ASME B16.5 Weld neck flange Raised face 10-inch CL150 ASME B16.5 Weld neck flange Raised face 10-inch CL300 ASME B16.5 Weld neck flange Raised face 10-inch CL600 ASME B16.5 Weld neck flange Raised face 36 ELITE Coriolis Flow and Density Meters

37 839 Super duplex 10-inch CL900 ASME B16.5 Weld neck flange Raised face Model CMFHC4M (316L stainless steel) 841 ASME B inch CL150 F316/F316L Weld neck flange Raised face 842 ASME B inch CL300 F316/F316L Weld neck flange Raised face 843 ASME B inch CL600 F316/F316L Weld neck flange Raised face 844 ASME B inch CL900 F316/F316L Weld neck flange Raised face 845 ASME B inch CL150 F316/F316L Weld neck flange Raised face 846 ASME B inch CL300 F316/F316L Weld neck flange Raised face 847 ASME B inch CL600 F316/F316L Weld neck flange Raised face 848 ASME B inch CL900 F316/F316L Weld neck flange Raised face 849 EN DN250 PN40 F316/F316L Weld neck flange Type B1 850 EN DN250 PN100 F316/F316L Weld neck flange Type B2 851 EN DN250 PN160 F316/F316L Weld neck flange Type B2 852 EN DN300 PN40 F316/F316L Weld neck flange Type B1 853 EN DN300 PN100 F316/F316L Weld neck flange Type B2 854 EN DN300 PN160 F316/F316L Weld neck flange Type B2 855 ASME B inch CL150 F316/F316L Weld neck flange Raised face 856 ASME B inch CL300 F316/F316L Weld neck flange Raised face 857 ASME B inch CL600 F316/F316L Weld neck flange Raised face Case options Model CMFS010 and Model CMFS015 N J M Q H T P U Case option Standard case (300-series stainless steel) Standard case (300-series stainless steel) with mounting bracket 316L stainless steel case 316L stainless steel case with mounting bracket Hygienic; 32 Ra finish (0.8 µm); 316L stainless steel case. Available only with Model CMFS010M or CMFS015M, and only with process connection 321, 344, 345, or 346. Hygienic; 32 Ra finish (0.8 µm); 316L stainless steel case with mounting bracket. Available only with CMFS010M or CMFS015M and only with process connection 321, 344, 345, or 346. Purge ; standard case Purge ; standard case with mounting bracket Product Data Sheet 37

38 Models CMFS025, CMFS040, CMFS050, CMFS075, CMFS100, and CMFS150 N P M K Case option Standard case (300-series stainless steel) Purge ; standard case 316L stainless steel case 316L Stainless Steel Case with purge s (one 1/2-inch NPT female) Model CMF010P N P D Case option Standard case (300-series stainless steel) Purge ; standard case Rupture disk: two 400 psi (28 bar) Models CMF200A, CMF300A, CMF400A, CMFHC2(M, Y, A), CMFHC3(M, Y, A), and CMFHC4M N Case option Standard case (300-series stainless steel) All other ELITE models N P Case option Standard case (300-series stainless steel) Purge ; standard case Electronics interface All CMFS Models Electronics interface option 0 Model 2400S transmitter 1 Extended mount Model 2400S transmitter 2 4-wire polyurethane-painted aluminum integral enhanced core processor for remote mount transmitters 3 4-wire stainless steel integral enhanced core processor for remote mount transmitters; not recommended for truck mount 4 4-wire polyurethane-painted aluminum integral extended mount enhanced core processor for remote mount transmitters 5 4-wire extended mount stainless steel integral enhanced core processor for remote mount transmitters; not recommended for truck mount 6 MVDSolo; polyurethane-painted aluminum integral enhanced core processor (for OEMs); when ordered with approval C, A, Z, I, MVD Direct Connect I.S. barrier is supplied 7 MVDSolo; stainless steel integral enhanced core processor (for OEMs); when ordered with approval C, A, Z, I, MVD Direct Connect I.S. barrier is supplied 8 MVDSolo; extended mount polyurethane-painted aluminum integral enhanced core processor (for OEMs); when ordered with approval C, A, Z, I, MVD Direct Connect I.S. barrier is supplied 38 ELITE Coriolis Flow and Density Meters

39 Electronics interface option 9 MVDSolo; extended mount stainless steel enhanced core processor (for OEMs); when ordered with approval C, A, Z, I, MVD Direct Connect I.S. barrier is supplied; not recommended for truck mount J U M N 2-wire integrally mounted Model 2200S transmitter; available only with calibration option Z 2-wire extended Model 2200S transmitter; available only with calibration option Z For stainless steel (base model code M) models only: For integral mount standard finish FMT Filling transmitter (must order with FMT); must be ordered with FMT Filling transmitter; cannot be sold separately For integral mount improved surface finish (64Ra) FMT Filling transmitter (must order with FMT); must be ordered with FMT Filling transmitter; cannot be sold separately Models CMF200A, CMF300A, and CMF400A Electronics interface option 0 Model 2400S transmitter 2 4-wire polyurethane-painted aluminum integral enhanced core processor for remote mount transmitters 3 4-wire stainless steel integral enhanced core processor for remote mount transmitters; not recommended for truck mount Q A C R S 4-wire polyurethane-painted aluminum integral core processor for remote mount transmitters 4-wire stainless steel integral core processor for remote mount transmitters Model 1700/2700 transmitter 9-wire polyurethane-painted aluminum junction box 9-wire 316L stainless steel junction box Models CMFHC2(M, Y), CMFHC3(M, Y), and CMFHC4M Electronics interface option 0 Model 2400S transmitter 1 Extended mount Model 2400S transmitter 2 4-wire polyurethane-painted aluminum integral enhanced core processor for remote mount transmitters 3 4-wire stainless steel integral enhanced core processor for remote mount transmitters; not recommended for truck mount 4 4-wire polyurethane-painted aluminum integral extended mount enhanced core processor for remote mount transmitters 5 4-wire extended mount stainless steel integral enhanced core processor for remote mount transmitters; not recommended for truck mount Model CMFHC2A and Model CMFHC3A Electronics interface option 0 Model 2400S transmitter 2 4-wire polyurethane-painted aluminum integral enhanced core processor for remote mount transmitters 3 4-wire stainless steel integral enhanced core processor for remote mount transmitters; not recommended for truck mount Product Data Sheet 39

40 All other ELITE models Electronics interface option 0 Model 2400S transmitter 1 Extended mount Model 2400S transmitter 2 4-wire polyurethane-painted aluminum integral enhanced core processor for remote mount transmitters 3 4-wire stainless steel integral enhanced core processor for remote mount transmitters; not recommended for truck mount 4 4-wire polyurethane-painted aluminum integral extended mount enhanced core processor for remote mount transmitters 5 4-wire extended mount stainless steel integral enhanced core processor for remote mount transmitters; not recommended for truck mount Q A J U R S H T 4-wire polyurethane-painted aluminum integral core processor for remote mount transmitters 4-wire stainless steel integral core processor for remote mount transmitters 2-wire integrally mounted Model 2200S transmitter; available only with calibration option Z 2-wire extended Model 2200S transmitter; available only with calibration option Z 9-wire polyurethane-painted aluminum junction box 9-wire 316L stainless steel junction box 9-wire extended mount polyurethane-painted aluminum junction box 9-wire extended mount stainless steel junction box Conduit connections All CMFS models A B E F G K L M Conduit connection option For electronics interface code 0, 1, J, U, M, N: No gland For electronics interface codes 2, 3, 4, 5, 6, 7, 8, 9: 1/2-inch NPT - no gland M20 - no gland Brass/nickel cable gland (cable diameter to inches [8.5 to 10 mm]) Stainless steel cable gland (cable diameter to inches [8.5 to 10 mm]) For model CMFS010 and CMFS015 with electronics interface codes 2, 3, 4, 5, 6, 7, 8, 9; available with approval codes M, S, and T only: JIS B0202 1/2G - no gland Japan - brass nickel cable gland Japan - stainless steel cable gland All other ELITE models A Conduit connection option For electronics interface codes 0, 1, K, J, U, and C: Not applicable 40 ELITE Coriolis Flow and Density Meters

41 B E F G A H J Conduit connection option For electronics interface codes 2, 3, 4, 5, H, T, Q, and A: 1/2-inch NPT - no gland M20 - no gland Brass/nickel cable gland (cable diameter to inches [8.5 to 10 mm]) Stainless steel cable gland (cable diameter to inches [8.5 to 10 mm]) For electronics interface codes R and S (9-wire junction box): 3/4-inch NPT - no gland Brass/nickel cable gland Stainless steel cable gland Approval options Model CMFS010 and CMFS015 Approval option For electronics interface codes 0, 1: M Micro Motion Standard (no approval) N Micro Motion Standard / PED compliant 2 CSA C-US (U.S.A. and Canada) Class I, Div. 2 V ATEX - Equipment Category 3 (Zone 2) / PED compliant 3 IECEx Zone 2 For electronics interface codes 2, 3, 4, and 5: M Micro Motion Standard (no approval) N Micro Motion Standard / PED compliant A CSA C-US (U.S.A. and Canada) Z ATEX - Equipment Category 2 (Zone 1) / PED compliant I IECEx Zone 1 S TIIS - T3 Temperature Classification; not available for quote outside of Japan T TIIS - T4 Temperature Classification; not available for quote outside of Japan J Hardware ready for TIIS approval; requires conduit connection E with electronic Interfaces 2,3,4, or 5 For electronics interface codes 6, 7, 8, 9: M Micro Motion Standard (no approval) N Micro Motion Standard / PED compliant C CSA (Canada only) - Not available with electronics interface code C A CSA C-US (U.S.A. and Canada) Z ATEX - Equipment Category 2 (Zone 1) / PED compliant I IECEx Zone 1 For electronics interface codes J and U: M Micro Motion Standard (no approval) Product Data Sheet 41

42 Approval option N Micro Motion Standard / PED compliant V ATEX - Equipment Category 3 (Zone 2) / PED compliant 3 IECEx Zone 2 A CSA C-US (U.S.A. and Canada) Z ATEX - Equipment Category 2 (Zone 1) / PED compliant I IECEx Zone 1 S TIIS - T3 Temperature Classification; not available for quote outside of Japan T TIIS - T4 Temperature Classification; not available for quote outside of Japan J Hardware ready for TIIS approval; requires conduit connection E with electronic Interfaces 2,3,4, or 5 For electronics interface codes M and N (model CMF010M and CMF015M only): M Micro Motion Standard (no approval) N Micro Motion Standard / PED compliant 2 CSA C-US (U.S.A. and Canada) Class I, Div. 2 V ATEX - Equipment Category 3 (Zone 2) / PED compliant 3 IECEx Zone 2 Model CMFS025, CMFS040, CMFS050, CMFS075, CMFS100, and CMFS150 Approval option For electronics interface codes 0, 1: M Micro Motion Standard (no approval) N Micro Motion Standard / PED compliant 2 CSA C-US (U.S.A. and Canada) Class I, Div. 2 V ATEX - Equipment Category 3 (Zone 2) / PED compliant 3 IECEx Zone 2 For electronics interface codes 2, 3, 4, and 5: M Micro Motion Standard (no approval) N Micro Motion Standard / PED compliant A CSA C-US (U.S.A. and Canada) Z ATEX - Equipment Category 2 (Zone 1) / PED compliant I IECEx Zone 1 P NEPSI; available only with language option M (Chinese) For electronics interface codes J and U: M Micro Motion Standard (no approval) N Micro Motion Standard / PED compliant V ATEX - Equipment Category 3 (Zone 2) / PED compliant 3 IECEx Zone 2 A CSA C-US (U.S.A. and Canada) Z ATEX - Equipment Category 2 (Zone 1) / PED compliant I IECEx Zone 1 42 ELITE Coriolis Flow and Density Meters

43 Approval option For electronics interface codes 6, 7, 8, 9: M Micro Motion Standard (no approval) N Micro Motion Standard / PED compliant A CSA C-US (U.S.A. and Canada) Z ATEX - Equipment Category 2 (Zone 1) / PED compliant I IECEx Zone 1 P NEPSI; available only with language option M (Chinese) For all other ELITE models Approval option For electronics interface codes 0, 1, M, N: M Micro Motion Standard (no approval) N Micro Motion Standard / PED compliant 2 CSA C-US (U.S.A. and Canada) Class I, Div. 2 V ATEX - Equipment Category 3 (Zone 2) / PED compliant 3 IECEx Zone 2 For electronics interface codes 2, 3, 4, and 5 (20) : M Micro Motion Standard (no approval) N Micro Motion Standard / PED compliant A CSA C-US (U.S.A. and Canada) Z ATEX - Equipment Category 2 (Zone 1) / PED compliant 6 ATEX - Equipment Category 2 (Zone 1, IIC modified) / PED compliant; models CMF200, CMF300, and CMF400 only I IECEx Zone 1 7 IECEx Zone 1, IIC modified; models CMF200, CMF300, and CMF400 only P NEPSI; available only with language option M (Chinese) 8 NEPSI, IIC modified; available only with language option M (Chinese) For electronics interface codes J and U (20) : M Micro Motion Standard (no approval) N Micro Motion Standard / PED compliant V ATEX - Equipment Category 3 (Zone 2) / PED compliant 3 IECEx Zone 2 A CSA C-US (U.S.A. and Canada) Z ATEX - Equipment Category 2 (Zone 1) / PED compliant I IECEx Zone 1 For electronics interface codes Q, A, C, R, S, H, and T (20) : M Micro Motion Standard (no approval) (20) Models CMF200, CMF300, CMF400, CMFHC2, CMFHC3, and CMFHC4 are rated for Group IIB with standard ATEX approval code Z, IECEx approval code I, or NEPSI approval code P (where applicable). The IIC modification option (approval codes 6, 7, and 8) should be used only when necessary for the specific area classification. Product Data Sheet 43

44 Approval option N Micro Motion Standard / PED compliant U UL; not available with electronics interface code C C CSA (Canada only) - Not available with electronics interface code C A CSA C-US (U.S.A. and Canada) Z ATEX - Equipment Category 2 (Zone 1) / PED compliant 6 ATEX - Equipment Category 2 (Zone 1, IIC modified) / PED compliant; models CMF200, CMF300, and CMF400 only I IECEx Zone 1 7 IECEx Zone 1, IIC modified; models CMF200, CMF300, and CMF400 only P NEPSI; available only with language option M (Chinese) 8 NEPSI, IIC modified; available only with language option M (Chinese) Languages A D E F G H I J M N O P S W C B K T U L V Y Language option Danish CE requirements document and English installation manual Dutch CE requirements document and English installation manual English installation manual French installation manual German installation manual Finnish CE requirements document and English installation manual Italian installation manual Japanese installation manual Chinese installation manual Norwegian CE requirements document and English installation manual Polish installation manual Portuguese installation manual Spanish installation manual Swedish CE requirements document and English installation manual Czech installation manual Hungarian CE requirements document and English installation manual Slovak CE requirements document and English installation manual Estonian CE requirements document and English installation manual Greek CE requirements document and English installation manual Latvian CE requirements document and English installation manual Lithuanian CE requirements document and English installation manual Slovenian CE requirements document and English installation manual 44 ELITE Coriolis Flow and Density Meters

45 Calibration options Model CMFS010 and Model CMFS015 C (21) K Calibration option 0.10% mass flow and g/cm 3 (2.0 kg/m 3 ) density 0.10% mass flow and g/cm 3 (0.5 kg/m 3 ) density 2 (22) 0.05% mass flow and g/cm 3 (0.5 kg/m 3 ) density All other CMFS models K D (22) Calibration option 0.10% mass flow and g/cm 3 (0.5 kg/m 3 ) density calibration liquid 0.10% mass flow and g/cm 3 (0.2 kg/m 3 ) density calibration liquid 2 (22) 0.05% mass flow and g/cm 3 (0.5 kg/m 3 ) density calibration liquid; requires electronics interface code 0, 1, 2, 3, 4, 5, 6, 7, 8, or 9 3 (22) 0.05% mass flow and g/cm 3 (0.2 kg/m 3 ) density calibration liquid Model CMF010 Z (21) Calibration option 0.10% mass flow and g/cm 3 (0.5 kg/m 3 ) density 2 (22) 0.05% mass flow and g/cm 3 (0.5 kg/m 3 ) density Models CMF200A, CMF300A, CMF400A, CMFHC2(M, Y, A), CMFHC3(M, Y, A), and CMFHC4M Z (21) Calibration option 0.10% mass flow and g/cm 3 (0.5 kg/m 3 ) density All other ELITE models Calibration option Z (21) D (22) 0.10% mass flow and g/cm 3 (0.5 kg/m 3 ) density 0.10% mass flow and g/cm 3 (0.2 kg/m 3 ) density 2 (22) 0.05% mass flow and g/cm 3 (0.5 kg/m 3 ) density 3 (22) 0.05% mass flow and g/cm 3 (0.2 kg/m 3 ) density Measurement application software A Measurement application software option Petroleum measurement; available only for CMFS models with electronics interface codes 6, 7, 8 and 9; for electronic interface codes 0, 1, 2, 3, 4, or 5, select the petroleum measurement software option on the transmitter (21) For gas or cryogenic liquid applications on Models CMFS010 and CMFS015, select calibration option C. For gas or cryogenic liquid applications on all other models, select calibration option code Z. Mass flow accuracy on gas or cryogenic liquid is ±0.35%. (22) Calibration codes D, 2, and 3 require electronics interface code 0, 1, 2, 3, 4, 5, 6, 7, 8, or 9 Product Data Sheet 45

46 C Z Measurement application software option Cryogenic application; includes remote core processor for direct host connection; available only for CMF025M, CMF050M, and CMF100M models with electronics interface option R, conduit option A, and approval options M, P, or Z; not available with wafer process connections. No measurement application software Factory options Z X Factory option Standard product ETO product 46 ELITE Coriolis Flow and Density Meters

47 PS-00374, rev. V Product Data Sheet April 2013 Emerson Process Management Micro Motion Americas Worldwide Headquarters 7070 Winchester Circle Boulder, Colorado T: T: F: Mexico: Argentina: Brazil: Venezuela: Emerson Process Management Micro Motion Europe/Middle East Central Europe: Eastern Europe: Dubai: Abu Dhabi: France: Germany: Italy: The Netherlands: Belgium: Spain: U.K.: Russian/CIS: Emerson Process Management Micro Motion Asia Pacific Australia: (61) China: (86) India: (91) Japan: (81) South Korea: (82) Singapore: (65) Micro Motion, Inc. All rights reserved. The Emerson logo is a trademark and service mark of Emerson Electric Co. Micro Motion, ELITE, ProLink, MVD and MVD Direct Connect marks are marks of one of the Emerson Process Management family of companies. All other marks are property of their respective owners. Micro Motion supplies this publication for informational purposes only. While every effort has been made to ensure accuracy, this publication is not intended to make performance claims or process recommendations. Micro Motion does not warrant, guarantee, or assume any legal liability for the accuracy, completeness, timeliness, reliability, or usefulness of any information, product, or process described herein. We reserve the right to modify or improve the designs or specifications of our products at any time without notice. For actual product information and recommendations, please contact your local Micro Motion representative.