Free Machining Austenitic Ferritic + Martensitic Pure Titanium Titanium Alloys Stainless Steels Stainless Steels <950N/mm 2
|
|
- Scott Brooks
- 6 years ago
- Views:
Transcription
1 & - Tps For Stinless Steels These top qulity Tps re mde in Switzerlnd, by DC-Swiss, one of the leding Tp Mnufcturers in Europe. All the Tps re mde of - (Powder Metl). This mteril hs proven to be the best solution for the mnufcture of Tps nd provides excellent shock nd wer resistnt properties. This DC-Swiss series of Tps hs been designed to work in Inox/Stinless Steels which re found in mny components tody tht must be resistnt to stem, het nd lso corrosive fluids. These components tend to be of high vlue. So mny users still hve reservtions regrding the tpping in these tough mterils. So DC-Swiss developed the & series of Tps to overcome these concerns. With it s specific cutting geometry, which hs been perfected for the use in these tough Stinless mterils, which hve high percentge of elongtion (elsticity). You re now ssured of success when tpping these vluble mterils. We hve hd number of customers tell us they hve chieved over five to ten times the tp life over other competitor tps on 304 nd 420 modified stinless steel. 2_62-3 TAP Our Spirl Fluted Tps in UNC nd Metric corse pitch threds hve nother dded design feture. DC-Swiss hs developed unique tp, which hs prt of its bck thred form truncted. This trunction reduces the torque on the tp, which is generted by the contrction of the mteril. The tps come with DC-Swiss surfce tretment process s stndrd which gives the Tps excellent properties to reduce cold welding. If you wish to get higher performnce DC-Swiss hs vilble s n option their surfce tretment process. This coting is more wer protective nd hs low coefficient of friction, which reduces torque nd elimintes cold welding. Type & re designed for through holes, nd the spirl point geometry on the Tp will push the swrf through the hole. CHARACTERISTICS Pictogrphs Type & hve 40 degree spirl flute, which will bring the swrf bck up the flute of the tp nd ejects it wy from the hole. This cn be used up to depth of bout 2.5 times the dimeter of the hole. Type & hve 40 degree spirl flute, tht brings the swrf bck up the flute of the tp nd ejects it wy from the hole. This cn be used up to depth of bout 2.5 times the dimeter of the hole For mteril groups s per DC ppliction chrt Stright flutes with spirl point 40 right hnd spirl flutes - Through holes, for long chipping mterils Blind holes, s fr s the core depth is 2x the threding depth Blind holes, for long chipping mterils < 2.5 x D 2-3 chmfered threds, form C 4 chmfered threds, form B Tolernce clss 2B Truncted thred DC surfce tretment APPLICATION CHART FOR THREAD TAP MATERIALS TO BE TAPPED Hrdness Tensile Elongtion SPEED Strength A 5 SFM <Ø20mm guide line Stndrd Coted BHN/HRC N/mm 2 % treted TN/TC/ 20 Stinless 21 Free Mchining Stinless Steels <250 <850 < steels 22 Austenitic Steels <250 <850 > Ferritic + Mrtensitic SS <950N/mm 2 <280 / <30 <950 > Titnium 41 Pure Titnium <250 <850 > Titnium Alloys >250 >850 < Free Mchining Austenitic Ferritic + Mrtensitic Pure Titnium Titnium Alloys Stinless Steels Stinless Steels <950N/mm TI 420 Gr. 1 Gr H Gr F Gr PH <250BHN Gr L 15-5 PH <250BHN *lso vilble in metric sizes
2 & - Tps SPIRAL FLUTE For Stinless Steels DIN Length / ANSI Shnk Tp Mteril: - Mteril Groups to be Tpped: DIN Length / ANSI Shnks d 1 UNC UNF Nominl Size (TPI) (TPI) inch inch inch inch inch order no. order no. order no. order no / / / / / / / / / / / / / / *lso vilble in metric sizes
3 & - Tps SPIRAL POINT (GUNTAPS) For Stinless Steels DIN Length / ANSI Shnk Tp Mteril: - Mteril Groups to be Tpped: DIN Length / ANSI Shnks d 1 UNC UNF Nominl Size (TPI) (TPI) inch inch inch inch inch order no. order no / / / / / / / / / / / / / / *lso vilble in metric sizes
4 M ISO DIN 13 Ø 25.4 > Ø 25.4 DIN 371 DIN M mm mm mm mm mm mm * * * 320-3
5 M ISO DIN 13 Ø 2.8 > Ø 2.8 DIN 371 DIN 376 M M mm mm mm mm mm mm * * * * * THREADING TECHNOLOGY 49
6 M ISO DIN 13 DIN 371 ~DIN 371 ( h6) S X X 4HX X M mm mm mm mm mm mm * * h6 M mm mm mm mm mm mm (h9) (h9) HX =
7 M ISO DIN 13 DIN 376 ~DIN 376 ( h6) M S X X X M mm mm mm mm mm h6 M mm mm mm mm mm * 10.0 * * 12.0 * * Norme DC / * DC Norm / * Norm DC THREADING TECHNOLOGY 51
8 MF ISO DIN DIN 371 ~DIN 371 ( h6) S X X MF mm mm mm mm mm mm * * * MF mm mm mm mm mm mm * * * h6 MF mm mm mm mm mm mm * P < 0.25 ISO 1 4H
9 MF ISO DIN DIN 374 ~DIN 376 ( h6) S MF X X MF mm mm mm mm mm MF mm mm mm mm mm * * * * * h6 MF mm mm mm mm mm * 10.0 * * 12.0 * * = 4 * Norme DC / * DC Norm / * Norm DC THREADING TECHNOLOGY 93
10 UNC ANSI B1.1 DIN 371 DIN B 2B 2B 2B UNC TPI mm mm mm mm mm mm * / / / / / / / *
11 UNC ANSI B1.1 Ø 2.8 > Ø 2.8 DIN 371 DIN UNC B 2BX 2B 2BX UNC TPI mm mm mm mm mm mm * * / / / / / * / * / * / * * * * * * * * * * * * = 4 THREADING TECHNOLOGY 115
12 UNC ANSI B1.1 ~DIN 371 ( h6) ~DIN 376 ( h6) S BX 2BX h6 UNC TPI mm mm mm mm mm mm (h9) (h9) / * 6.0 * / / / / * 10.0 * / / * Norme DC / * DC Norm / * Norm DC h6 UNJC UNC TPI mm mm mm mm mm mm (h9) (h9) (h9) / * 6.0 * / B UNC(J) * Norme DC / * DC Norm / * Norm DC 116
13 UNF ANSI B DIN 371 DIN B 2B 2B 2B UNF TPI mm mm mm mm mm mm / / / / / UNF TPI mm mm mm mm mm mm / / / / / / /
14 UNF ANSI B1.1 ~DIN 371 DIN 374 / ~DIN 376 ( h6) S UNF 2BX 2BX 2BX 2BX UNF TPI mm mm mm mm mm mm / / / / / * * * * * * h6 UNF TPI mm mm mm mm mm mm / * 6.0 * / / / / * 10.0 * h6 UNF TPI mm mm mm mm mm mm * Norme DC / * DC Norm / * Norm DC / * 6.0 * / / * Norme DC / * DC Norm / * Norm DC UNJF B UNF(J) THREADING TECHNOLOGY 135
THREADING TECHNOLOGY Ê-7 --Ê- THREADING TOOLS FOR AEROSPACE. ÓÇÎxÊ > ià>þ. /i ʳ{ ÊÎÓÊ{ ÊÈÎÊÈÎ >Ýʳ{ ÊÎÓÊ{ ÊÈ{ÊÈ{ > \Ê v J`VÃÜ Ãà V
DO-01-04-07..N THRADING TCHNOLOGY We hve mde every effort to ensure tht the informtion (drwings, prints, technicl dt) given is correct. However, we do not ssume ny responsibility for ny errors, omissions
More informationProduct range MEGAlife
Product rnge Fx enquiries: +49 89 76909-11 sles@iwis.com MEGAlife MEGAlife mintennce free roller nd conveyor chins cn be pplied in ll res where post instlltion lubriction is not t ll or only prtly possible.
More informationQuality HSS (EW 9 Co 10 - cobalt 10%). Ø x l mm 16 x x x x x
Engrver's points Tool holder its Cutting-Off nd Grooving Tools 1812-1816 Engrver's Points With rough-ground profile. For use on tempered nd chrome-nickel steel. For engrving lettering, profiling for contours,
More informationSeries 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve
Series 250 Type 3251-1 nd Type 3251-7 Pneumtic Control Vlves Type 3251 Globe Vlve DIN version Appliction Control vlve for process engineering pplictions with high industril requirements Nominl size DN
More informationSSAB Water mains PIPES AND FITTINGS
SSAB Wter mins PIPES AND FITTINGS Pipes nd fittings mnufctured y SSAB re used primrily with wter pipeline sizes DN 400-1200. The fittings re mde of steel pressure pipes (ex works delivery) nd cn e coted
More informationThe widest range to provide the optimum tailor made solutions to your fume and gas extraction needs.
FUME XTRACTION ARMS Improving your workspce Chemicl resistnt Antisttic Stndrd FX ARMS The widest rnge to provide the optimum tilor mde solutions to your fume nd gs extrction needs. Avilble in Stndrd, Antisttic
More informationAluminium and (-2)* aluminium casting alloys *() * emulsion (long-chip) **
System components for installation Standard range of HELICOIL plus manual and machine taps Range of types Recommended guide values Manual Machine tap tap Through hole Blind hole Cutting Cooling All hole
More informationBIMETAL-POINTER-THERMOMETER
BIMETA-POINTER-THERMOMETER Chemicl version cc. EN 30 byonet cse IP 6 With or without filling Suitble for chemicl nd petrochemicl industry, food, pulp nd pper industry nd for mchine nd pprtus contruction.
More informationJUMO MIDAS C18 SW. OEM seawater pressure transmitter. Applications. Brief description. Customer benefits. Special features. Approvals/approval marks
Pge /8 JUMO MIDAS C8 SW OEM sewter pressure trnsmitter Applictions wter tretment reverse osmosis, e.g. sewter deslintion plnts purifiction plnts orgnic cids, e.g. cetic cid solutions contining chloride,
More information631 ALLOWANES AND TOLERANCES
631 ALLOWANES AND TOLERANCES ANSI Fits. Tbles 3 through 9 inclusive show series of stndrd types nd clsses of fits on unilterl hole bsis, such tht the fit produced by mting prts in ny one clss will produce
More informationNEW ROUND INSERT CUTTER DE6G_/1DE6G_ DE6H_/1DE6H_ DE6K_/1DE6K_ ROUND INSERT CUTTER
NEW ROUND INSERT CUTTER DE6G /1DE6G DE6H /1DE6H DE6K /1DE6K ROUND INSERT CUTTER DE6G_/1DE6G_ DE6H_/1DE6H_ DE6K_/1DE6K_ Double sided / high economicl 8- resp. 16-fold indexble insert 2 different insert
More informationInternal Turning, Profiling, Grooving & Face Machining of Small Diameters
Internl Turning, Proiling, Grooving & Fce Mchining o Smll Dimeters Insert Styles/ Applictions: MINT... Turning/Chmering MINP... Turning/Proiling MINC... Turning/45º Chmering MING... Grooving MINF... Deep
More informationFINGER STRIPS. and other EMI shielding products. Characteristics
BERYLLIUM COPPER CONTCT FINGER STRIPS nd other EMI shielding products ppliction Due to their outstnding mteril nd electricl chrcteristics, eryllium copper fingers of different shpes nd dimensions re used
More informationKING COBRA/KING COBRA-2 NARROW STILE SERIES KC9357/KC9357-2
KING COBRA/KING COBRA-2 NARROW STILE SERIES KC9357/KC9357-2 Keypd Progrmmble nd SNAP Comptible Trim For Rim Exit Devices Mounted On Aluminum Doors. 57047-B 04-2007 Contents of the Box KC9357/KC9357-2 INSTALLATION
More informationGATE VALVES ALV-1 FORGED STEEL NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS. ANSI Class PN /4-2 DN 8-50.
FORGED STEEL GTE VLVES LV-1 NOMINL PRESSURE NSI Class 150-1500 PN 16-250 NOMINL 1/4-2 DN 8-50 MTERILS Carbon Steel Low lloy Steel Stainless Steel CONNECTIONS Socket Weld Butt Weld Threaded Flanged XELVLVES
More informationLincoln Under-cabinet Light Installation Instructions
Lincoln Under-cbinet Light Instlltion Instructions #1500178 Rev A Congrtultions on your new Lincoln Under-cbinet Light! Whether purchsed for its significnt energy svings nd efficiency, lower lifetime costs,
More informationScrewdrivers. Ergonomically designed handles. Greater torque. Slip-proof grip. Threecomponent. handle a. TBI Screwdrivers
Screwdrivers TBI Screwdrivers R Screwdrivers NI Screwdrivers VE Screwdrivers VE TBI Screwdrivers Bits Impct screwdrivers Other ccessories Ergonomiclly designed hndles The superior qulity of mterils used
More informationLTV 29-2 and 39-2 angle nutrunners. Higher speed, lower energy consumption
LTV 29-2 nd 39-2 ngle nutrunners Higher speed, lower energy consumption Thumbs up for the LTV 9 series in customer trils LTV 29 tril rouses Ford s interest The Ford plnt in Cologne, Germny, with cpcity
More informationSection 7 Stainless Steel 316 Threaded Fittings
Section 7 Stainless Steel 316 Threaded Fittings Edition 3 121 [7] STINLESS STEEL 316 THREDED FITTINGS Specifications bout Stainless Steel - Stainless steel can be defined as a steel alloy that has a minimum
More informationThreading tools to JIS standard
Taps for metric, metric-fine, UNC, UNF and PT threads For universal applications, stainless steel, cast iron and aluminium as well as for hard machining -PM high-performance taps with new TiAlN-coating
More informationJUMO MIDAS S05 OEM pressure transmitter - universal
Delivery ddress: Mckenrodtstrße 4 609 Fuld, Germny Postl ddress: 605 Fuld, Germny Phone: +49 66 600-0 Fx: +49 66 600-607 Hrlow, Essex CM0 DY, UK Phone: +44 79 655 Fx: +44 79 656 Cnstot, NY 0, USA Phone:
More informationMurtfeldt Internet Chain Tensioners for Roller Chains to DIN8187
Murtfeldt Internet www.murtfeldt.de Chin Tensioners for Roller Chins to DIN8187 185 186 Murtfeldt E-mil info@murtfeldt.de Murtfeldt Fxline +49-231- 25 10 21 Chin Tensioners with Arc Segment Profile for
More information2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03
2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 20 l/min, p mx = 315 r idirectionl set-vlve shut-off, direct cting, electriclly operted 1 Description he W2N / W2 series of 2/2 4/4 solenoid operted
More information4/2- and 4/3-way shut-off valve
Courtesy of CMA/Flodyne/Hydrdyne Motion Control Hydrulic Pneumtic Electricl Mechnicl (00) 426-540 www.cmfh.com 4/2- nd 4/3-wy shut-off vlve Type Z4WE Size 6 Component series 3X Mximum operting pressure
More informationRoller and ball bars for easy and safe die change
Roller nd bll brs for esy nd sfe die chnge T-slot tolernces cc. to DIN 6 b c h n min. mx. mx. 8 H8 + +,6 H8 37 +3 +,6 8 H8 +4 0 + 48 56,6 H8 56 +4 5 +3 6 7,5 Dimensions in mm h min. = smllest dimension
More informationSTEEL WIRE & ROPE FITTINGS
6 Contents Bever mintins wie rnge of wire rope n fittings tht cn be use for towing n lifting, pplictions. Furthermore Bever hs the bility to offer mnufcture slings me to orer. With Bever s ISO Qulity n
More informationMANN+HUMMEL Oil-bath air cleaner Single-stage air cleaner without spare parts
MANN+HUMMEL Oil-th ir clener Single-stge ir clener without spre prts 57 Oil-th ir clener: Servicing without spre prts The proven oil-th ir cleners from MANN+HUMMEL re suitle for light to medium dust conditions
More informationSolenoid operated spool valve with soft switching NG10 ISO
WWMF1 Solenoid operted spool vlve with soft switching Flnge construction 4/3-wy with spring centred mid position 4/2-wy with spring reset Q mx = 12 l/min p mx = 35 r DESCRIION Direct operted solenoid spool
More informationUNIVERSAL ALUMINIUM CASE
UC SERIES UNIVERSAL ALUMINIUM CASE 3 2 4 Simple structure nd tough cse with extruded luminium covers. 36 sizes nd 3 different colors for totl of 108 different combintions re vilble. 2 or 3 grooves vilble
More informationMFPN MFPN. Reduced chattering with low cutting force design. Milling with double sided 10-edge inserts
Milling with doule sided 10-edge inserts MFPN MFPN Reduced chttering with low cutting force design conomicl 10-edge insert Low cutting force due to curved cutting edge design uppresses frcturing with dul
More informationRadiant Process Heaters. Gemini. Medium Wave Heaters Twin Bore Quartz Tube Technology
Rdint Process Heters Gemini Medium Wve Heters Twin Bore Qurtz Tue Technology Design Fetures Industry stndrd twin ore qurtz tue formts with 95% het trnsmittnce 24-krt Gold Bck Coting for trgeted infrred
More informationBERMAD Waterworks. 400 Series. Basic Valve. ??????? WW-400 Basic Valve
Bsic Vlve??????? WW-400 Bsic Vlve The bsic Model WW-400 diphrgm ctuted hydruliclly operted vlve is t the leding edge of control vlve design. It combines simple nd relible construction with superior performnce,
More informationYE-PT19 EUROPE. HSS-PM (Powder Metallurgy) TAPS Excellent Performance on Various Work Materials HEAD OFFICE
YE-T19 EUROE (owder Metallurgy) TAS Excellent erformance on Various Work Materials HEAD OFFICE 211, Sewolcheon-ro, Bupyeong-gu, Incheon, South orea hone: +82-32-526-0909 Http://www.yg1.kr E-mail: yg1@yg1.kr
More informationInstallation and Operational Instructions for ROBA -slip hubs Sizes 0 12 (B.1.0.GB)
Plese red these Opertionl Instructions crefully nd follow them ccordingly! Ignoring these Instructions my led to mlfunctions or to clutch filure, resulting in dmge to other prts. These Instlltion nd Opertionl
More informationMODEL 1200 WATER WHEEL TRANSPLANTER OPERATING MANUAL
MODEL 1200 WATER WHEEL TRANSPLANTER OPERATING MANUAL Tble Of Contents Axle, Tire... 3 Fetures... 13 Foot Rest... 4 Helpful Tips... 14 Options... 13 Prts Brekdown, Description...10-12 Prts Brekdown, Exploded
More informationPOWER COMBICON Plugs and Headers PC 6/ for Currents up to 41 A, mm Pitch
POWER COMBICON Plugs nd Heders PC 6/ for Currents up to 41 A, The PC 6 plug connector fetures highly conductive metl lloys to offer current crrying cpcity of 41 A t rted voltge of 1000 V. A double steel
More informationPOWER PRICE UNI. powerful UNF METAL. UNCPower. power ful GOLD FOR. powerful TOP GEOMETRIES UNF PERFECT CHOICE VER. perfect thread form.
MADE BY UNIVERSALtaps TOP GEOMETRIES FORM EUNIVERSAL UNIVERSAL TAPS powerful perfect UNF longideal flutes choice tool life PROCESS RELIABLE PERFECT universal power ful UNC-THREAD ISO-METRIC THREADS GUHRING
More informationTPI NO. OF DIA. THREAD EDP NO. SIZE UNC UNF FLUTES LIMIT LENGTH OAL SETS TAPER PLUG BOTTOM
Straight Flute Hand Taps Straight Flute hand taps are used for hand tapping and machine tapping in through holes or blind holes Available in sets, taper (8-10 thread chamfer), plug (3-5 thread chamfer)
More informationPneumatic Actuators 1000, 1400, 2800, and 2 x 2800 cm² Type 3271 and Type 3277 for integral positioner attachment Hand-operated Actuator Type 3273
Pneumtic Actutors 000, 400, 2800, nd 2 x 2800 cm² Type 27 nd Type 277 for integrl positioner ttchment nd-operted Actutor Type 27 Appliction Liner ctutor in prticulr for ttchment to Series 240, 250, nd
More informationCOLLECTION JARS & SUCTION LINERS SUCTION COLLECTION JARS SUCTION LINERS ACCESSORIES. English version 11/ 2 010
COLLECTION JARS & SUCTION LINERS SUCTION ACCESSORIES English version 11/ 2 010 TM COLLECTION JARS The collection jrs re used to collect liquids or mucus resulting from medicl suction. They cn e used in
More informationJUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits
Mckenrodtstrße 4 609 Fuld, Allemgne 605 Fuld, Allemgne Tél. : +49 66 600-0 Fx. : +49 66 600-607 B.P. 4500 57075 Metz Cedex, Frnce Tél. : + 87 7 5 00 Fx. : + 87 7 89 00 Industriestrße 8 4700 Eupen, Belgique
More informationBrazed heat exchanger XB
Description The XB is rnge of copper rzed plte het exchngers for use in District Heting (DH) nd District Cooling (DC) pplictions, e.g. domestic hot wter production, district heting susttion to seprte the
More informationtel. +44 (0) 28 37 518111 fx +44 (0) 28 37 528181 e.mil sles@technidrive.co.uk points for considertion when shft mounting direct drive ger units. modern hollow bore output hub ger units lend themselves
More informationVARIFLUX IFS 6000 Electromagnetic Flowmeter
KROHNE 04/2001 D 31 VR60 02 E GR/PRINTO IFS 6000 Electromgnetic Flowmeter for snitry nd septic pplictions For mny different ppliction fields with mny different types of process connections For mesurement
More informationGUARDIAN VERTICAL MOUNTING
GUARDIAN VERTICAL MOUNTING L120 GUARDIAN INDUSTRIAL & ATEX Exi VERTICAL REED LEVEL SWITCH This rnge of mgnet operted reed switches re equipped with hermeticlly seled reed contcts. The flot is fitted with
More informationPush-in RTD temperature probe for heat meters with connecting cable for thermowells (type PS/PL)
elivery ddress: Mckenrodtstrße 14 36039 Fuld, Germny Postl ddress: 36035 Fuld, Germny Fx: +49 661 6003-607 Emil: mil@jumo.net Temple Bnk, Riverwy Hrlow, Essex, CM20 2Y, UK Fx: +44 1279 62 50 29 Emil: sles@jumo.co.uk
More informationSumitomo Electric Carbide, Inc. DFC Milling Cutter Series
CAT.FCBROCHURE.3/18 Sumitomo Eectric Cride, Inc. FC Miing Cutter Series GS Chipreker Expnsion Improved chip contro for shouder miing High Efficiency, 90 Miing Cutter High Performnce oue-sided 6 Edge Inserts
More information4/2- and 4/3-directional spool valve solenoid-operated, direct-acting 4WE 6
4/2- nd 4/3-directionl spool vlve solenoid-operted, direct-cting 4WE 6 DESCRIION HYDC 4/2- nd 4/3- directionl spool vlves of the 4WE 6 series re directionl vlves for oil hydrulic systems which re used
More informationCast Stainless Steel Butt-Weld Outlet Connection Data
180 Stainless Steel Cast Stainless Steel utt-weld Outlet Connection Data Josam cast stainless steel drains and cleanouts are regularly furnished with Schedule 40S butt-weld outlet connections. utt-weld
More informationAluminium Floor Outlets - Trapped Outlets
Aluminium Floor Outlets - Trpped Outlets Verticl Trpped Outlet Components Drin Body Dimensions 260 Grte* Funnel Sel Trp Assemly Funnel Cup * Elevtion Throt Throt Sel DPM Clmp Ring with Weep Bung (shown
More informationData Sheet T /4/5/6 EN
Dt heet T 8310-1/4/5/6 EN Pneumtic Actutors up to 750v2 cm² Type 3271 Type 3277 for integrl positioner ttchment Appliction Liner ctutors prticulrly suitble for ttchment to eries 240, 250, 280 nd 290 Vlves
More informationCOLLECTION JARS & LINERS SUCTION COLLECTION JARS SUCTION LINERS ACCESSORIES
COLLECTION JARS & SUCTION LINERS SUCTION ACCESSORIES English version 11/ 2010 TM COLLECTION JARS The collection jrs re used to collect liquids or mucus resulting from medicl suction. They cn e used in
More information2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03
2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) idirectionl lek-proof shutoff, direct cting, electriclly operted Series W2N, W2 1 Description With crtridge
More informationVB-7000 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents
V-7000 Series Selection Guide T V-7000 Series 1/2 to 2 Globe Vlves with Fort M400, M800, nd M1500 ctutors pplictions T Fort M400, M800, nd M1500 series liner ctutors mount directly 1 onto 1/2 to 2 V-7xxx
More informationPrecision Pressure Transmitter with Switching Contacts and Display. Interface Setup program. Display 4 characters. Switching output 1.
Dt sheet 405054 Pge 1/7 JUMO DLOS HP Precision Pressure Trnsmitter with Switching Contcts nd Disply Appliction Hydrulic plnts Mchine nd plnt engineering Test benches Lbortory equipment Brief description
More informationBoring Instructions for Steel Hubs
Couplings teel Hub Boring, Keyseting, etscrews & Puller Holes All Types (Pge 1 of 8) Figure 1 Figure 2 Figure 5 Boring Instructions for teel Hubs Refer to the pproprite selection guide for coupling hub
More information(mω) 1. Temperature ( C) Voltage (V) ULRG1 /
Resistors Metl Strip Current Sense Resistors Surfce Mount Metl Element Current Metl Element Sense Resistor UR Series UR Current Series Sense Resistor Mke Possible Resistnce R0005 (m ) to R015 (15m ) Metl
More information@ ECV Technical Data High Lift Pallet Truck. ECV 10 C ECV 10i C ECV 10
@ ECV Technicl Dt High Lift Pllet Truck ECV 10 C ECV 10i C ECV 10 Lifting Mde Esy This specifiction sheet to VDI Guideline 198, only provides the technicl vlues for the stndrd truck. Different tyres, other
More informationTECHNICAL INSIGHT INTERNAL CLEARANCE - TYPES AND NORMS
TECHNICAL INSIGHT PRODUCT AND APPLICATION ENGINEERING INFORMATION A PUBLICATION OF NSK AMERICAS INTERNAL CLEARANCE - TYPES AND NORMS Internl clernce is the distnce which the two rings of non-instlled bering
More informationSome thoughts on requirements for languages in engineering Requirements for Languages for modelling big systems World Ontology Summit,
Some thoughts on requirements for lnguges in engineering Requirements for Lnguges for modelling big systems World Ontology Summit, 2012-03-22 Dvid Lel Topics 1. Need for clsses, clsses of clss, etc. Not
More informationHEATING BLANKETS FOR GENERAL COMPOSITE REPAIR
Innovtion in Technology for Aircrft Mintennce Equipment, Airline Support through Engineering & Trining Advnced Composite & Metllic Structures Cge Code - NATO Code : F7856 - Eur VAT- ID: FR90 328961073
More informationHEKO products and services
HEKO products nd services Elements for ucket elevtors Components for chin conveyors Chins nd ccessories for rotry kilns Clcultions, dvice nd servicing of conveyors HEKO Ketten GmH Postfch 1262 D-58732
More informationHAZET Range of Pullers / Extractors
HAZET Rnge of 2-Arm Pullers Forged qulity 3-Arm Pullers Prcticl nd proven tools Hydrulic Pullers New innovtive rnge of pullers ll ering Extrctors For industry, utomotive sector, commercil see Specilty
More informationWFX Series. Four-cornered shoulder mill for steel, stainless steel, and cast iron machining. High Performance Milling Systems. Stainless.
High Performnce Milling ystems eries our-cornered shoulder mill for steel, stinless steel, nd cst iron mchining teel tinless teel Cst Iron Grdes The type is the first series to offer the newly developed
More informationSolenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl
More informationSolid Carbide Tools. Drilling Solutions. New Expanded Offering. ISO 9001 Certified
Solid Carbide Tools Drilling Solutions New Expanded Offering ISO 9001 Certified A B1 B2 E C D SERIES 135 A HIGH PERFORMANCE FLUTE DESIGN efficiently transpts chips increases strength f aggressive drilling
More informationFLUID SYSTEMS. Products are available from MARYLAND METRICS
FLUID SYSTEMS Products re vilble from MARYLAND METRICS P.O. Box 26 Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 web: http://mdmetric.com emil: sles@mdmetric.com RFQ form:
More informationHarmer Roof Drainage The Cast Iron Range
Cst Iron Roof Outlets - Introduction Hrmer Roof Dringe The Cst Iron Rnge The high qulity Cst Iron Roof Outlet rnge, feturing medium sump nd lrge sump odies, two-wy outlets nd n extensive rnge of lodering
More informationBASIC STANDARDS. Core holes for tapping screws and bolts with tapping screw thread DIN Simple, most common tapping thread-joints.
ISO DIN : 797 Core holes for tapping screws and bolts with tapping screw thread DIN 7970 Guidelines for application The essential characteristic of tapping screw thread is its capability of forming chipless
More informationElectrically operated directional spool valve with a soft-shift function type WE10P NS 10. up to 35 MPa up to 120 DATA SHEET - OPERATION MANUAL
LICTION Electriclly operted directionl spool vlve with soft-shift function type WE10 NS 10 Electriclly operted directionl spool vlve type WE10 is intended for chnging the direction of fluid flow in hydrulic
More informationCV3000 Series Smart-Port Single Seated Control Valves with Steam Jacket Model HLS
No. SS2-8113-0220 CV3000 Series Smrt-Port Single Seted Control Vlves with Stem Jcket Model HLS OVERVIEW Model HLS Smll-Port Single Seted Control Vlves with Stem Jcket re designed for hevy duty service
More informationCable Trolleys for C-Rails Program
Cble Trolleys for C-Rils Progrm 02 0 0260 Contents C-Ril nd Accessories Progrm 02 C-Ril x... 2 Trck Coupler... 2 End Stop... 2 Trck Support Brcket... 2 Support Arm nd Girder Clip... 3 Brcket... 3 Cble
More informationSolid Carbide Thread Milling
Solid Carbide Thread Milling 07 - '06 Contents Page GRADES OF COMBIDEX SOLID CARBIDE THREAD MILLS Micrograin 4 Order Example 4 ISO - Metric Thread 6O 5 ISO - Metric Fine Pitch Thread 6O 5 ISO - Metric
More information2017 NORTH AMERICA TAPS EDITION
2017 NORTH AMERICA TAPS EDITION PRIMED FOR PRODUCTIVITY THE MOST POWERFUL TAPS IN THE BUSINESS PROUDLY BEAR OUR NAME. WIDIA-GTD delivers a complete range of solid carbide, high performance, multipurpose,
More informationWATERTIGHT AIRTIGHT SPECIAL ACCESS DOORS & HATCHES, PART 1 GENERAL
SECTION 08316 WTERTIGHT IRTIGHT SPECIL CCESS DOORS & HTCHES, PRT 1 GENERL HIGHLIGHTED RES TO BE INSERTED BY SPECIFYING ENGINEER. 1.1 WORK OF THIS SECTION. THE WORK OF THIS SECTION INCLUDES PROVIDING LL
More informationSPIRAL POINT TAPS for through hole tapping
SPIRAL FLUTE TAPS for blind hole tapping Ideally suitable for blind hole tapping in most materials, particularly aluminium, brass, copper and similar metals. The build up of swarf at the bottom of the
More informationPOWERHEAD. Section 4A - Cylinder Head. Rocker Shaft and Rocker Arm... 4A-21 Camshaft... 4A-22 Cylinder Head... 4A-24
POWERHEAD Section 4A - Cylinder Hed CYLINDER HEAD Tle of Contents Specifictions........................... 4A-2 Specil Tools........................... 4A-4 Cylinder Hed.......................... 4A-6
More informationDIEBOLD IN LOBBY TELLER (ILT) PORTRAIT OR LANDSCAPE INSTALLED WITH A COIN RECYCLER SIDE CAR PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 7
L2 CLL -800--600 TP-826-00. R CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE DIEBOLD 00 - IN LOBBY TELLER (ILT) PORTRIT OR LNDSCPE
More informationPrint This Page. Return To Index
PLASTI-BOND REDH2OT KNOCKOUT HUBS KNOCKOUT HUBS PRST2 PRSTG2 Knockout Hubs Specifictions Knockout Hubs Configurtions ST STG2 b c STTB STTTB d COMPLIANCES PLASTI-BOND REDH 2 OT ST style knockout hubs re
More informationTap and Drill Bit Selection Guide
148 2012/2013 Power Tools & Accessories Catalog Tap and Drill Bit Selection Guide American Standard and Unified Form Threads Tap drill size is approximately 7% of threaded depth. Thread Nominal Size Standard
More informationCarbide Drills When productivity matters - Stub 1. to Long 1
CARBIDE DRILLS Carbide Drills When productivity matters - Stub 1 to Long 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings Drill
More informationWorld s Leading Supplier of Fastener Inspection Equipment
World s Leding Supplier of Fstener Inspection Equipment clibrtion Price list Qulity Service for your Qulity Deprtment Plese include the following with your clibrtion order: 1 PO Number 1 Clibrtion Cycle
More informationANTI-BLOWOUT SYSTEM MOUNTING VARIATIONS. NOMINAL VALUES: Pressure rating max 115 PSI Temperature range: UNI 6060:
4 5 1 2 6 8 7 3 92 1 2 3 NOMINL VLUES: Pressure rating max 115 PSI Temperature range: Pre lubricated for life of actuator on assembly From MOD. 52 up to 140 supply chambers MOD. 160-200-270 Standard polyester
More informationFloor Scrubs Squeegees Handles Hand Brushes Shovels and Scoops Scrapers Tube Brushes Wall Brackets Metal Detectable
»» Brooms»» Floor Scrubs»» Squeegees»» Hndles»» Hnd Brushes»» Shovels nd Scoops»» Scrpers»» Tube Brushes»» Wll Brckets»» Metl Detectble hygiene nd food hndling WWW.SITECRAFT.COM.AU BROOMS Yrd Brooms With
More informationWirewound Resistor, Industrial High Power, Vitreous Tubular, Adjustable, Low Values 0.12 to 560
Wirewound Resistor, Industrial High Power, Vitreous Tubular, djustable, Low Values to 560 FETURES High power rating: 16 W to 600 W at 25 C Heavy overloads 10 P n 15 s 1 % Low ohmic values 0.10 available
More informationAccessories. Inlet nozzles 550. Guard grilles 553. Lead connections, capacitors 558. Terminal boxes, air filters 562
Accessories Generl informtion Inlet nozzles 550 Gurd grilles 553 Led connections, cpcitors 558 Terminl boxes, ir filters 562 Speed setting, motor protection switch, third-prty ccessories 564 Technology
More informationHand-operated Actuator Type 3273
Hnd-operted Actutor Type 3273 Appliction Hnd-operted ctutor for ttchment to vlves, especilly for Series 240, 250 nd 260 Control Vlves. Rted trvels of 5 nd 30 mm. Nominl thrusts up to 32 kn The Type 3273
More information2 Way Slip-In Cartridge Valves Series CE, CP, C
tlogue H-3500/UK hrcteristics Wy Slip-In rtridge lves Series E,, wy slip-in crtridge vlves re hydruliclly controlled set vlves tht re designed for compct block instlltion. Slip-in crtridge, cover, nd pilot
More informationMachine Taps 2017 High-Performance Machine Taps. Machine. Professional Line Standard Line Eco Line
chine Tps 2017 High-erformnce chine Tps chine Tps rofessionl Line Stndrd Line 2017 Eco Line High-erformnce chine Tps Symbols For ge Reference Thred form 55 F UN UNF Whitworth G etric etric Fine UN thred
More informationGroove Milling Inserts. Grooving Inserts
Groove Milling Inserts Grooving Inserts GROOVE MILLING INSERTS VARDEX Circlip Non Stndrd Circlip DIN 471/472 O Ring DIN 3770 O Ring BS 1806, DIN 3601, DIN 3771 O Ring BS 4518 Contents Pge 250 Pge 251 Pge
More informationSpark Plug Fouling 3.0 Liter OptiMax
WARRANTY INFORMATION PARTS INFORMATION SERVICE INFORMATION Bulletin No. 2002-07 Circulte to: Sles Mnger Accounting Service Mnger Technicin Prts Mnger Sprk Plug Fouling 3.0 Liter OptiMx Models Affected
More informationSolid Carbide Thread Milling
Ordering Code Standard Fine D D L L T Height Pitch/mm Solid Carbide Thread Milling Contents Information Page - ISO Metric & External Thread Page - 2 ISO Metric Pitch & Fine Pinch External Thread 60º Page
More informationADDITIONAL HAND TOOLS ADDITIONAL HAND TOOLS
ITION HN TOOS ITION HN TOOS W h e n i t s o u t s u c c e s s, d e t i l s m t t e r HOW MUH TTENTION SHOU WE GIVE TO ETIS? lwys more thn you would first think. The line of dditionl Unior hnd tools comprises
More informationTaps, Dies & Threading
Hand s Premium er, Plug & Bottoming Style s s, s & ing Inch s er Style Plug Style Bottoming Style 6 32 2 3 0.688 GH3 915600 915628 915656 8 32 2-1/8 4 0.750 GH3 915601 915629 915657 10 24 2-3/8 4 0.875
More information3/3, 4/2 and 4/3 directional poppet valve with solenoid actuation
3/3, 4/2 nd 4/3 directionl poppet vlve with solenoid ctution RE 22035/06.10 Replces: 12.08 1/16 Type SEC Size 6 Component series 1X Mximum operting pressure 420 r [6100 psi] Mximum flow 25 l/min [6.6 US
More information4/3, 4/2 and 3/2 explosion-proof solenoid directional valve
01/06 4/3, 4/2 nd 3/2 explosion-proof solenoid directionl vlve Type G...WE6...L6X 2.21 Size (NG) 6 Up to 350 br Up to 80 L/min Contents Function nd configurtion Specifictions 03 Spool symbols 03 Technicl
More informationE & G Tools (M) Sdn Bhd Tel : / Fax : ADDITIONAL HAND TOOLS ADDITIONAL HAND TOOLS
HOW MUCH TTENTION SHOU WE GIVE TO ETIS? lwys more thn you would first think. W h e n i t s o u t s u c c e s s, d e t i l s m t t e r E & G Tools (M) Sdn hd Tel : 03-78044210/03-78044202 Fx : 03-78044212
More informationDRILL INSERTS & HOLDERS
DRILL INSERTS & HOLDERS THROW-AWAY DRILL INSERTS DRILL INSERT HOLDERS HOLDER ACCE SSORIES General Introduction Throw-Away Drill Inserts and Holders The Throw-Away Inserts YG-1's throw-away drill inserts
More informationFire dampers. The art of handling air. Type FKA-EU tested to EN FKA-EU/DE/BE/en. according to Declaration of Performance
FKA-EU/DE/BE/en Fire dmpers Type FKA-EU tested to EN 1366-2 ccording to Declrtion of Performnce DoP / FKA-EU / DE / 2013 / 001 The rt of hndling ir Contents Description Description 2 Correct use 3 Construction
More informationÅLASTRON S.A. Ag. Ioannis str., Ag. Ioannis Aspropyrgos Tel.: Fax:
ÅLASTRON S.A. Ag. Ionnis str., Ag. Ionnis 193 00 Aspropyrgos Tel.: +30 210 5515000 Fx: +30 210 5515015 www.elstron.gr elstron@elstron.gr 1 SQUARE HOLLOW SECTIONS (EN 10219) Dimensions Cross section Weight
More information