FLUID SYSTEMS. Products are available from MARYLAND METRICS
|
|
- Nancy Cain
- 6 years ago
- Views:
Transcription
1 FLUID SYSTEMS Products re vilble from MARYLAND METRICS P.O. Box 26 Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800) web: emil: RFQ form: copyright 20 mrylnd metrics/crne ltd.
2 Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800) CONTENTS Pges to 7 Specifiction PIPE FITTINGS SPECIFICATION Pges 8 to 29 Mlleble iron pipe fittings Pges 0 to 4 Bronze pipe fittings Crne Tper Thred Pipe Fittings Pipe threds on Crne Pipe Fittings re British Stndrd tper to BS EN which replces BS2 (ISO7-) unless otherwise stted. Crne Tper Thred Fittings offer instllers numerous dvntges: Full enggement the whole thred length - relible strong joints No need for hemp filler - fst instlltion, low costs High torques cn be pplied without risk of dmging the fitting Freedom to brek nd re-mke joints Professionl joint ppernce BS EN 0242 BS4 &256 RFQ form: emil: sles@mdmetric.com 2
3 Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800) SPECIFICATION SPECIFICATION Pipe threds The mchined threds of Crne fittings re supplied to conform with the guging requirements of BS EN nd BS 2. Threds on ll fittings re chmfered to ssist ssembly nd void ʻcross thredingʼ. Femle fittings hve chmber behind the thred, permitting the mle thred to be ssembled without restriction or ʻbottomingʼ. Design stndrds ISO 49 : 994 is the interntionl stndrd for "Mlleble cst iron fittings threded to ISO 7-. This stndrd ws revised in December 994 nd, compred with the 98 edition, contined some technicl revisions relting to use of lterntive ferrous mterils, hot dip zinc cotings, disptch condition, pressure/temperture rtings, cceptnce tests, mrking nd qulity ssurnce. BS EN 0242 : 995 is the new British Europen Stndrd for "Threded pipe fittings in mlleble cst iron" first published in August 995 nd very closely follows ISO 49 : 994, the min difference being the inclusion of two informtive nnexes relting to "Assessment of conformity" nd the "Reltionship with the essentil requirements of the Construction Products Directive (84/06/EEC)". All Europen Stndrds hve to be dopted by the member countries of the EU nd ny conflicting ntionl stndrds withdrwn. BS4 nd 256: 2000 hs been retined to cover those fittings not in BS EN It should lso be noted tht BS EN 0242 detils number of fitting types nd sizes which were not included in BS 4 & 256 becuse they were not in regulr demnd nd/or not vilble from UK mnufcturers. BS 4 & 256 : 2000 specifies requirements for the design nd performnce of "Mlleble cst iron nd cst copper lloy threded pipe fittings" nd hs developed over mny yers. BS 4 ws first published in 922 nd BS 256 in 945, subsequently the two stndrds were combined in 968. The BS 4 design requires fittings to hve tper externl threds nd tper internl threds conforming to BS EN 0226 wheres the BS 256 design hs tper externl threds nd prllel internl threds. The 986 revision ws more closely relted to ISO 49 : 98 nd more ccurtely reflected the rnges of fittings vilble from UK mnufcturers. BS 4 & 256 hs lwys been techniclly more demnding thn ISO 49 nd consequently BS EN BS 4 & 256 were mended in August 995 to delete those fittings now covered by BS EN 0242, so the scope of BS 4 & 256 is now essentilly : () BS 4 design nd BS 256 design fittings in mlleble iron not covered by BS EN 0242, (b) BS 4 design fittings threded to ANSI B.20. (NPT) nd (c) BS 4 design fittings mde in cst copper lloy (bronze) mteril. Conformnce of Crne fittings Both mlleble iron nd steel fittings hve been verified by the British Stndrds Institute (BSI) s conforming to BS EN 0242 nd BS4 & 256, s pproprite, nd s such re permitted to ber the British Stndrds Kitemrk Logo - Kitemrk Licence No. KM0082. Some smll size fittings re mnufctured in steel nd will conform to BS EN 024. The Pressure Equipment Directive 97/2/EC (PED) The Directive pplies to the design, mnufcture nd conformity of pressure equipment nd ssemblies of pressure equipment with mximum llowble pressure greter thn 0.5 br. Individul piping components, such s fittings, re excluded from the scope of the Directive nd therefore cnnot be CE mrked. However Crne mnufctured pipe fittings re RFQ form: emil: sles@mdmetric.com
4 Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800) SPECIFICATION mnufctured to the pproprite Europen stndrds nd stisfy the essentil sfety requirements of the PED. A Certificte of Incorportion for Pipe Fittings cn be ccessed on the Crne website, or will be provided on request from Crne. Piping instlltion SPECIFICATION Compiled from British nd Interntionl stndrds on Pipe Threds BS EN 0226 (supercedes BS2) nd Pipe Fittings stndrds BS EN 0242, BS 4 & 256 nd ISO 49. Much unnecessry lbour nd cretion of rndom lengths of pipe might be sved by the ppliction of few simple figures by the engineer when erecting the pipe line. Generlly the pipe line, section by section, is either ccommodted within fixed limits, usully the lines of building construction, or is fixed by prescribed dimensions. Except in the cse of continuous run of piping connected either by sockets or flnges, the engineer needs to know the length of pipe required to mke up between fixed positions of fittings prior to cutting nd threding. The digrm below nd tble of 'A' dimensions indictes the length of thred enggement of BS EN 0226 tper pipe threds in nominl sizes 8 to 6 inch. The pproximte pipe length is clculted by using the expression L=C-(B+B2)+2A. PIPE LENGTH L A A CENTRE TO FACE B CENTRE TO CENTRE C CENTRE TO FACE B2 'A' Dimension informtion Fitting A Fitting A size size inches inches Dimensions given do not llow for tpping or threding tolernces Pipe ends Users re dvised to ensure tht the externl threds on the pipe being screwed into Crne fittings re free from dmge or ny mlformtion nd conform to the guging requirements of BS EN RFQ form: emil: sles@mdmetric.com 4
5 Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800) SPECIFICATION SPECIFICATION ISO BS EN BS identifiction symbols Crne Fig. No. Symbol Type Mll. Bronze A Elbows 5 J5 A/45 55 J55 A4 52 J5 B Tees 6 J6-6 - C Crosses 7 J7 D Bends 9 - D D4/ E Pitcher tees 99 - E2 Twin elbows 97 - Kb Return bends Sockets 76 J76 M M2 79 J79 M 80 - N4 Bushes 40 J40 N8 Nipples 44 J44 N8 45 J45 P4 Bck nuts 50 J50 T2 Cps 85 J85 T8 Plugs 47 - T8 48 J48 T T 49 J49 U Unions 24 U 256 J256 U 27 U U U UA Elbow 26 - UA Unions UA UA The symbols shown in the bove tble re those given in BS 4 & 256, BS EN 0242 nd ISO 49 for mlleble iron fittings nd in BS 4 & 256 for copper lloy fittings, nd relte to the identifiction of fitting types. 5 RFQ form: emil: sles@mdmetric.com
6 Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800) SPECIFICATION Designtion of fitting size The designtion of fitting size for the fittings shown in this ctlogue is s follows: EQUAL FITTINGS: Equl fittings where ll outlets re the sme size re designted by tht one size, irrespective of the number of outlets. UNEQUAL FITTINGS: Unequl fittings (reducing or enlrging) re specified by the sizes of ech outlet, the sequence being dependent on the number of outlets: () For fittings hving two outlets, the lrger outlet is specified first. Exmple: Fig. No. 45 hexgon reducing nipple with one end threded size 2 nd other end threded size, is designted 2 x (b) For fittings hving more thn two outlets. Crne uses BS EN 0242 method (b) which gives the run s the first nd second sizes of the designtion nd the brnch s the third size of the designtion. This is in contrst to BS EN 0242 method () which gives the run s the first nd third sizes of the designtion nd the brnch s the second size of the designtion. This method is used in certin interntionl mrkets. (Plese see the digrms below for visul explntion). BS EN 0242 method () equivlents re specified in this ctlogue where pplicble. SPECIFICATION UK method BSEN 0242 nd ISO 49 Method (b) s used by Crne. (2) Interntionl method BSEN 0242 nd ISO 49 Method () () () (2) () Fig. No. 6 tees (2) () Fig. No. 6 tees () () (2) () Fig. No. 99 pitcher tees () Fig. No. 99 pitcher tees RFQ form: emil: sles@mdmetric.com 6
7 Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800) SPECIFICATION SPECIFICATION Mlleble cst iron Crne mlleble iron is of the Blckhert type idelly suited to pipe fitting nd mnufcture nd conforms to BS EN 562 Designtion EN-GJMB-00-6, ASTM A97 nd ISO Typicl properties of Crne mlleble iron re given in the tble below, exceeding the requirements in the bove BS EN, ASTM nd ISO stndrds. Chemicl Mechnicl composition Typicl properties Typicl Totl crbon 2.7% Tensile strength (N/mm 2 ) 40 Silicon.75% Elongtion on 6mm (%) 2 Mngnese 0.69% Izod impct (room temp.) (J) 2 Sulphur 0.8% Brinell hrdness 25 Phosphorous 0.02% Density (g/cm ) 7.56 The close reltionship between the physicl properties of test brs nd ctul cstings ensures design integrity nd the preservtion of high sfety fctors. Shock pressures within pipe systems cn be tolerted with complete sfety. The corrosion resistnce of Crne mlleble iron is good when compred with grey cst iron nd mild steel for most generl pplictions including wter, gs nd stem. Crne bronze Crne bronze hs very good resistnce to corrosion by ggressive wters, stem nd other fluids which promote dezincifiction in certin copper lloys. It is lso suitble for wide rnge of tempertures. Mild steel BS4 nd 256 llow smll size ( 8 nd smller) stright fittings to be supplied in other ferrous mterils e.g. mild steel s n lterntive to mlleble cst iron, providing the mechnicl properties re t lest equivlent to the specified grde of mlleble iron. Individul dt pges stte which Crne fittings re supplied in mild steel. Glvnising Where dditionl resistnce to corrosion is required, mlleble cst iron fittings cn be hot-dip zinc coted (glvnised) prior to mchining. This process involves coting the fittings with zinc which, in ddition to its nturl resistnce to corrosion, provides electro-chemicl protection where the iron of the fitting is exposed by dmge. Mild steel fittings cn be supplied with proprietry zinc bsed coting. The coting weight on Crne glvnised fittings conforms to the requirements of BS EN ISO nd ASTM 5 with minimum coting of 60 g/m2 (2oz/ft2) equl to thickness of 86μm (0.004 in). Averge cotings re well in excess of this nd exceed the requirements given in BS EN 0242 nd ISO 49. When ordering glvnised or zinc coted fittings dd the suffix ʻGʼ to the figure number. 7 RFQ form: emil: sles@mdmetric.com
8 Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800) SPECIFICATION Pressure/Temperture rtings BS 4 & 256 : 986 sttes tht fittings re for generl purposes for the trnsmission of fluids within the pressure nd temperture rnges specified. The rtings given re uprted from those in the 968 edition, both for mlleble cst iron nd bronze fittings. The grph below shows the BS pressure temperture rtings. Crne mlleble iron nd bronze fittings re suitble for use t these new rtings with the exception of certin unions (see note Ø below), but such use is dependent on the suitbility of the connecting pipe mteril, the threded joint nd ny thred selnts used. Due considertion should lso be given to ny pplicble codes of prctice. Pressures stted re mximum non-shock guge. SPECIFICATION 2 lbf/in br B A 25 br t -20 to 20 C* 6 br t -20 to 20 C* SATURATED STEAM LINE br t 00 C C F * Hot dip zinc coted (glvnised) fittings should not be used below -0 C (4 F) Bronze fittings cn be used t tempertures below -20 C (-4 F). Refer to Crne for confirmtion of suitbility. Stem, ir, gs Wter BS ref Mteril Fitting type & oil service service 0 br t 00 C BS 4 & Mll. iron Bronze All pipe fittings (including unions Ø) Grph B Grph A Grph B Grph A Ø Ct. No. 24 unions re limited to 20 C mximum. Ct.Nos. 27, 272, 276, 277 nd 289 unions re limited to 208 C mximum. Testing Production testing: Meets requirements of BS EN 0242 or BS 4 nd 256 s pplicble. Type testing: In ddition to production testing, ll pressure contining fittings re required by BS EN 0242, BS 4 & 256 nd ISO 49 to be designed to withstnd specified design test pressures nd to be type tested ccordingly - 00 br (450 lbf/in 2 ) for sizes 4 nd smller mlleble iron fittings, 64 br (928 lbf/in 2 ) for sizes 5 nd 6 mlleble iron nd ll sizes bronze fittings. Tests crried out show tht production fittings hve sfety mrgins well in excess of the BS requirement. Some typicl burst tests on Crne fittings illustrte their cpbilities - size 2 Fig. No. 9 bend tested to 550 br (8000 lbf/in 2 ) without filure; size Fig. No. 24 flt set union tested to 248 br (600 lbf/in 2 ) without filure; size 6 Fig. No. 5 elbow tested to 90 br (2750 lbf/in 2 ) without filure. Finish All mlleble iron fittings re given n oil finish s protection ginst rust while in stock or during trnsit nd fter instlltion prior to plnt commissioning. Finished fittings re free of ny polycyclic romtic hydrocrbons. Mrking All Crne fittings re mrked with the logo nd where size permits, the fitting size nd Kitemrk symbol. In ddition, some cstings lso disply pttern identifiction number. This is normlly locted next to the bnd of the fitting. This number is used during the mnufcturing process s prt of the rigorous qulity control procedures to ensure consistent high qulity cstings. The number is not of relevnce to the end user of the product. RFQ form: emil: sles@mdmetric.com 8
9 Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800) Fig No. 40 HEXAGON BUSH Fig No. 48 PLAIN PLUG SOLID Fig No. 55 Fig No. 44 HEXAGON NIPPLE Fig No. 49 COUNTERSUNK PLUG Fig No. 56 Fig No. 45 HEXAGON NIPPLE REDUCING Fig No. 50 BACKNUT PARALLEL THREAD TO BS 2779 (ISO 228-) Fig No. 6 Fig No. 46 BEADED PLUG SOLID Fig No. 5 ELBOW Fig No. 6 Fig No. 47 PLAIN PLUG HOLLOW Fig No. 52 M & F ELBOW Fig No ELBOW 45 M&FELBOW TEE M&FTEE CROSS Fig No. 76 Fig No. 77 Fig No. 79 Fig No. 80 Fig No. 85 SOCKET PARALLEL THREAD TO BS 2779 (ISO 228-) SOCKET TAPER THREAD SOCKET REDUCING ECCENTRIC SOCKET CAP Fig No. 9 Fig No. 92 Fig No. 9 Fig No. 97 Fig No. 99 MALE BEND M&FBEND BEND TWIN ELBOW PITCHER TEE Fig No. 2 Fig No. 2 Fig No. 24 Fig No. 256 Fig No. 257 RETURN BEND ROUND FLANGE UNION FLAT SEAT UNION SPHERICAL SEAT IRON TO IRON M & F UNION SPHERICAL SEAT IRON TO IRON Fig No. 26 Fig No. 262 Fig No. 27 Fig No. 272 Fig No. 276 ELBOW UNION SPHERICAL SEAT IRON TO IRON M&FELBOWUNION SPHERICAL SEAT IRON TO IRON UNION SPHERICAL SEAT BRONZE TO IRON M & F UNION SPHERICAL SEAT BRONZE TO IRON ELBOW UNION SPHERICAL SEAT BRONZE TO IRON Fig No. 277 Fig No. 289 Fig No. 290 M & F ELBOW UNION SPHERICAL SEAT BRONZETOIRON UNION SPHERICAL SEAT BRONZE TO BRONZE UNION SELF ALIGNING (SA) 9 BS EN 0242 BS 4 ISO49 RFQ form: emil: sles@mdmetric.com
10 Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800) * Supplied in mild steel. FIG. NO. 40 HEXAGON BUSH f PER 00 * 4 x * 8 x * 8 x x * 2 x x x x x x PN 25 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x RFQ form: emil: sles@mdmetric.com 0
11 Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800) PN 25 FIG. NO. 40 HEXAGON BUSH f PER 00 4x x x x x x x x x x FIG. NO. 44 HEXAGON NIPPLE f PER 00 * * FIG. NO. 45 HEXAGON NIPPLE f PER 00 * 4 x * 8 x x x x x x x RFQ form: emil: sles@mdmetric.com
12 Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800) * Supplied in mild steel. FIG. NO. 45 HEXAGON PIPE FITTINGS NIPPLE f PER 00 4 x x x x x x x x x PN 25 x x FIG. NO. 46 BEADED PLUG SOLID c f PER FIG. NO. 47 PLAIN PLUG HOLLOW b f PER RFQ form: emil: sles@mdmetric.com 2
13 Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800) PN 25 FIG. NO. 48 PLAIN PLUG - SOLID b f PER 00 * * FIG. NO. 49 COUNTERSUNK PLUG d f PER FIG. NO. 50 BACKNUT Prllel thred to BS 2779 (ISO 228-) f PER 00 * RFQ form: emil: sles@mdmetric.com
14 Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800) * Supplied in mild steel. b FIG. NO. 5 ELBOW PER 00 Equl PN 25 Reducing 8 x x x x x x x x x x x x x RFQ form: emil: sles@mdmetric.com 4
15 Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800) PN 25 FIG. NO. 52 M & F ELBOW b PER 00 Equl Reducing 4 x x x FIG. NO ELBOW PER RFQ form: emil: sles@mdmetric.com
16 Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800) b FIG. NO M & F BEND PER PN 25 FIG. NO. 6 TEE BSEN 0242 method (b) method () b PER 00 Equl Reducing on brnch 8 x x x b 4 x x x x x x x x x x RFQ form: emil: sles@mdmetric.com 6
17 Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800) PN 25 FIG. NO. 6 TEE b BSEN 0242 method (b) method () b PER 00 Reducing on brnch 2 x x x x x x x x x x x x x x x x x x 4.0 x x x x x x x x x x x x c Reducing on run 2 x 4 x 2 4 x 2 x 4 BSEN 0242 method (b) method () b c PER 00 2 x 2 x x 4 x b x 2 x xx x 4 x xx x 2 x 4 4 x 4 x x 4 x 4 4 x 4 x xx 4 4 x 4 x x 2 x 2 2 x 2 x x 4 x 2 2 x 2 x xx 2 2 x 2 x RFQ form: emil: sles@mdmetric.com
18 Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800) BSEN 0242 method (b) method () b c PER 00 Reducing on run 2x 2 x2 2x2x x 4x 2 2x2x x x 2 2 x 2 x x 2 x2 2x2x x 2 x x2 2 x x 2 x x x Reducing on run & brnch 2 x 8 x 8 2 x 8 x FIG. NO. 6 TEE b PN 25 c 4 x 2 x 2 4 x 2 x x 4 x 2 x 2 x x 4 x 4 x 4 x xx 2 4 x 2 x xx 4 4 x 4 x xx 4 x x xx 2 x x x 4 x 2 2 x 2 x x 4 x 2 xx x 4 x 4 2 x 4 x x 2 x 2 2x 2 x x 2 x 4 2x 4 x x 2 x 2xx x 2 x 4 2x 4 x x 2 x 2 2x 2 x BSEN 0242 method (b) method () b PER 00 Incresing on brnch 2 x x x x x x x b RFQ form: emil: sles@mdmetric.com 8
19 Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800) PN 25 FIG. NO. 6 M & F TEE FIG. NO. 7 CROSS b PER PER FIG. NO. 76 SOCKET Prllel thred to BS 2779 (ISO 228-) PER 00 * * * RFQ form: emil: sles@mdmetric.com
20 Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800) FIG. NO. 77 SOCKET PER PN 25 FIG. NO. 79 REDUCING SOCKET PER 00 Reducing * 8 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x RFQ form: emil: sles@mdmetric.com 20
21 Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800) PN 25 FIG. NO. 80 ECCENTRIC SOCKET *Suppliedinmildsteel. PER 00 Reducing 4 x 2 7. x x x x x x x x x x x x x x x x x x x FIG. NO. 85 CAP PER 00 * * RFQ form: emil: sles@mdmetric.com
22 Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800) PER FIG. NO. 9 MALE BEND FIG. NO. 92 M & F BEND PN 25 PER FIG. NO. 9 BEND PER RFQ form: emil: sles@mdmetric.com 22
23 Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800) PN 25 FIG. NO. 97 TWIN ELBOW FIG. NO. 99 PITCHER TEE PER BSEN 0242 method (b) method () b c PER 00 b c Equl Reducing on brnch 4 x x x x x x x x x x x x x x x x x x x x x RFQ form: emil: sles@mdmetric.com
24 Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800) BSEN 0242 method (b) method () FIG. NO. 99 PITCHER TEE b c PER 00 Reducing on brnch x x x x Reducing on run & brnch 4 x 2 x 2 4 x 2 x x 4 x 2 x 2 x x 4 x 4 x 4 x b PN 25 c Reducing on run 4 x 2 x 4 4 x 4 x FIG. NO. 2 RETURN BEND PER RFQ form: emil: sles@mdmetric.com 24
25 Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800) PN 25 FIG. NO. 2 ROUND FLANGE PER 00 Undrilled & unfced FIG. NO. 24 UNION FLAT SEAT f PER FIG. NO. 299 GASKET FOR FIG. NO. 24 (compressed non-sbestos fibre) PER FIG. NO. 256 UNION SPHERICAL SEAT iron to iron f PER RFQ form: emil: sles@mdmetric.com
26 Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800) b f FIG. NO. 257 M & F UNION PER PN 25 FIG. NO. 26 ELBOW UNION c f PER 00 SPHERICAL SEAT iron to iron FIG. NO. 262 M & F ELBOW UNION b c f PER 00 SPHERICAL SEAT iron to iron RFQ form: emil: sles@mdmetric.com 26
27 Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800) PN 25 FIG. NO. 27 UNION SPHERICAL SEAT bronze to iron f PER FIG.NO.272 M&FUNION SPHERICAL SEAT bronze to iron f PER FIG. NO. 276 ELBOW UNION SPHERICAL SEAT bronze to iron c f PER RFQ form: emil: sles@mdmetric.com
28 Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800) FIG. NO. 277 M & F ELBOW UNION b c f PER SPHERICAL SEAT bronze to iron PN 25 FIG. NO. 289 UNION f PER SPHERICAL SEAT bronze to bronze RFQ form: emil: sles@mdmetric.com 28
29 Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800) FIG. NO. 290 UNION f PER THE CRANE SA (SELF ALIGNING) UNION The Crne SA Union is mde with double sphericl sets. Pipes which re not in lignment cn be securely connected t ny ngle up to 6 of rc from centre line of the union, thus voiding the need for offsets. The union provides pressure tight joint without the use of gskets or wshers. Self ligning (SA) Union Double sphericl sets Iron to iron seting TperthredstoBS2(ISO7-) Blck or Glvnised 29 RFQ form: emil: sles@mdmetric.com
30 Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800) SA Union - femle 6 out of lignment nd still pressure tight RFQ form: emil: sles@mdmetric.com 0
31 Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800) BRONZE PIPE FITTINGS PN 6 BRONZE PIPE FITTINGS Fig No. J40 HEXAGON BUSH Fig No. J44 HEXAGON NIPPLE Fig No. J45 HEXAGON NIPPLE REDUCING Fig No. J50 Fig No. J5 Fig No. J5 Fig No. J48 PLAIN PLUG SOLID Fig No. J6 Fig No. J49 COUNTERSUNK PLUG Fig No. J7 BACKNUT PARALLEL THREAD TO BS 2779 (ISO 228-) ELBOW M&FELBOW TEE CROSS Fig No. J76 Fig No. J79 Fig No. J85 Fig No. J256 SOCKET PARALLEL THREAD TO BS 2779 (ISO 228-) SOCKET REDUCING CAP STRAIGHT UNION RFQ form: emil: sles@mdmetric.com
32 Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800) FIG. NO. J40 HEXAGON BUSH f PER 00 4 x x x x x x x x x x x x x x x x x x x x x f PN 6 MALLEABLE BRONZE PIPE IRON FITTINGS HANGERS AND BRACKETS FIG. NO. J44 HEXAGON NIPPLE f PER f FIG. NO. J45 HEXAGON NIPPLE f PER 00 4 x x x x x x x x f RFQ form: emil: sles@mdmetric.com 2
33 Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800) BRONZE PIPE FITTINGS PN 6 FIG. NO. J48 PLAIN PLUG SOLID f b b f PER FIG. NO. J49 COUNTERSUNK PLUG b f PER 00 f b FIG. NO. J50 BACKNUT Prllel thred to BS 2779 (ISO 228-) f PER 00 f FIG. NO. J5 ELBOW PER RFQ form: emil: sles@mdmetric.com
34 Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800) c FIG. NO. J5 M & F ELBOW PER 00 PN 6 BRONZE PIPE FITTINGS FIG. NO. J6 TEE PER FIG. NO. J7 CROSS PER FIG. NO. J76 SOCKET PER 00 Prllel thred to BS 2779 (ISO 228-) RFQ form: emil: sles@mdmetric.com 4
35 Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800) BRONZE PIPE FITTINGS PN 6 FIG. NO. J79 REDUCING SOCKET PER 00 8 x x x x x FIG. NO. J85 CAP PER FIG. NO. J256 UNION f PER RFQ form: emil: sles@mdmetric.com
36 Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800) RFQ form: emil: 6
37 Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800) When you see these signs - you re sfe Suitble for Use with Drinking Wter The British Stndrds Kitemrk mens tht the fittings hve been independently ssessed by BSI to confirm complince with the product stndrds - BSEN 0242 nd BS4 nd 256. Crne kitemrked fittings re deemed to stisfy the requirements of the United Kingdom Wter Regultions (Byelws). Tper Thred fittings This sign mens tht the fitting is mnufctured in the UK by Crne nd hs tper thred. This ensures the fitting engges with the whole thred of the pipe which is lso tpered giving strong, relible joint without the need for hemp filler. Crne Fittings crry the signs to ssure you of the best of British mnufcture. 7 RFQ form: emil: sles@mdmetric.com
38 CRANE FLUID SYSTEMS Products re vilble from MARYLAND METRICS P.O. Box 26 Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800) web: emil: RFQ form: CRANE HOU5E,EPSILON TERRACE WEST ROAD,IPSWICH SUFFOLK IP 9FJ
contents MALLEABLE PIPE FITTINGS BUsHEs NiPPlEs PlUgs caps BENds BackNUTs UNioNs TEEs 171 cross PN25 p socket PN25 p socket PN25 p.
contents BUsHEs 140 Hexagon Bush p.5 NiPPlEs 144 octagon Nipple p.6 145 Hexagon Nipple p.6 PlUgs 146 Beaded Plug - solid p.7 147 Plain Plug - Hollow p.7 148 Plain Plug - solid p.7 149 countersunk Plug
More informationP I P E F I T T I N G S OUR GENIUS IS PIPE FITTINGS
MALLEABLE P I P E F I T T I N G S OUR GENIUS IS PIPE FITTINGS Specification Pipe Threads The machined threads of Crane fittings are supplied to conform with the gauging requirements of BS EN 10226-2 and
More informationMALLEABLE PIPE FITTINGS
M A L L E A B L E P I P E F I T T I N G S O UR GENI US I S PIPE FIT TI NG S Specification Pipe Threads The machined threads of Crane fittings are supplied to conform with the gauging requirements of BS
More information631 ALLOWANES AND TOLERANCES
631 ALLOWANES AND TOLERANCES ANSI Fits. Tbles 3 through 9 inclusive show series of stndrd types nd clsses of fits on unilterl hole bsis, such tht the fit produced by mting prts in ny one clss will produce
More informationInstallation and Operational Instructions for ROBA -slip hubs Sizes 0 12 (B.1.0.GB)
Plese red these Opertionl Instructions crefully nd follow them ccordingly! Ignoring these Instructions my led to mlfunctions or to clutch filure, resulting in dmge to other prts. These Instlltion nd Opertionl
More informationSeries 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve
Series 250 Type 3251-1 nd Type 3251-7 Pneumtic Control Vlves Type 3251 Globe Vlve DIN version Appliction Control vlve for process engineering pplictions with high industril requirements Nominl size DN
More informationCC-410 KIT SERIES INSTRUCTION SHEET
(COMPLETE CC-410-W KIT ILLUSTRTED. CUT-OUTS IN TRCK & FSCI TO EXPOSE COMPONENTS) CC-410 KIT SERIES INSTRUCTION SHEET CROWDERTRCK S CTCH N CLOSE TM SYSTEM PREVENTS BOUNCING ND SLMG OF SLIDING DOORS. CN
More informationtel. +44 (0) 28 37 518111 fx +44 (0) 28 37 528181 e.mil sles@technidrive.co.uk points for considertion when shft mounting direct drive ger units. modern hollow bore output hub ger units lend themselves
More informationCCS-810 KIT SERIES INSTRUCTION SHEET
(COMPLETE KIT ILLUSTRTED. CUT-OUTS IN TRCK & FSCI TO EXPOSE COMPONENTS) CCS-810 KIT SERIES INSTRUCTION SHEET CROWDERTRCK S CTCH N CLOSE TM SYSTEM PREVENTS BOUNCING ND SLMMING OF SLIDING DOORS. CN BE INSTLLED
More informationCCD-493 KIT SERIES INSTRUCTION SHEET
(COMPLETE CCD-493-W KIT ILLUSTRTED. CUT-OUTS IN TRCK TO EXPOSE COMPONENTS) CCD-493 KIT SERIES INSTRUCTION SHEET CROWDERTRCK S CTCH N CLOSE TM SYSTEM PREVENTS BOUNCING ND SLMMING OF SLIDING S. CN BE INSTLLED
More informationRPEA3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated with 8W Coil. Replaces HA /2007
Directionl Control Vlves Solenoid Operted with 8W Coil RPEA3-06 0/20 Size 06 (D 03) 350 br (5076 PSI) 80 L/min (2 GPM) Replces 2/2007 /3-, /2- wy directionl control vlves Enclosure type to IP65 Push button
More informationVB-7000 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents
V-7000 Series Selection Guide T V-7000 Series 1/2 to 2 Globe Vlves with Fort M400, M800, nd M1500 ctutors pplictions T Fort M400, M800, nd M1500 series liner ctutors mount directly 1 onto 1/2 to 2 V-7xxx
More informationWATERTIGHT AIRTIGHT SPECIAL ACCESS DOORS & HATCHES, PART 1 GENERAL
SECTION 08316 WTERTIGHT IRTIGHT SPECIL CCESS DOORS & HTCHES, PRT 1 GENERL HIGHLIGHTED RES TO BE INSERTED BY SPECIFYING ENGINEER. 1.1 WORK OF THIS SECTION. THE WORK OF THIS SECTION INCLUDES PROVIDING LL
More informationBrazed heat exchanger XB
Description The XB is rnge of copper rzed plte het exchngers for use in District Heting (DH) nd District Cooling (DC) pplictions, e.g. domestic hot wter production, district heting susttion to seprte the
More informationTECHNICAL INSIGHT INTERNAL CLEARANCE - TYPES AND NORMS
TECHNICAL INSIGHT PRODUCT AND APPLICATION ENGINEERING INFORMATION A PUBLICATION OF NSK AMERICAS INTERNAL CLEARANCE - TYPES AND NORMS Internl clernce is the distnce which the two rings of non-instlled bering
More informationBIMETAL-POINTER-THERMOMETER
BIMETA-POINTER-THERMOMETER Chemicl version cc. EN 30 byonet cse IP 6 With or without filling Suitble for chemicl nd petrochemicl industry, food, pulp nd pper industry nd for mchine nd pprtus contruction.
More informationGUARDIAN VERTICAL MOUNTING
GUARDIAN VERTICAL MOUNTING L120 GUARDIAN INDUSTRIAL & ATEX Exi VERTICAL REED LEVEL SWITCH This rnge of mgnet operted reed switches re equipped with hermeticlly seled reed contcts. The flot is fitted with
More informationTHREADING TECHNOLOGY Ê-7 --Ê- THREADING TOOLS FOR AEROSPACE. ÓÇÎxÊ > ià>þ. /i ʳ{ ÊÎÓÊ{ ÊÈÎÊÈÎ >Ýʳ{ ÊÎÓÊ{ ÊÈ{ÊÈ{ > \Ê v J`VÃÜ Ãà V
DO-01-04-07..N THRADING TCHNOLOGY We hve mde every effort to ensure tht the informtion (drwings, prints, technicl dt) given is correct. However, we do not ssume ny responsibility for ny errors, omissions
More informationTITAN DIFFERENTIAL PRESSURE DPF266 ATEX/IECEx Exd, Exia & INDUSTRIAL DIFFERENTIAL PRESSURE, SWITCH
TITAN DIFFERENTIAL PRESSURE DPF266 ATEX/IECEx Exd, Exi & INDUSTRIAL DIFFERENTIAL PRESSURE, SWITCH This rnge hs been used to monitor very smll chnges in vcuums nd hs been specified extensively for offshore
More informationBERMAD Waterworks. 400 Series. Basic Valve. ??????? WW-400 Basic Valve
Bsic Vlve??????? WW-400 Bsic Vlve The bsic Model WW-400 diphrgm ctuted hydruliclly operted vlve is t the leding edge of control vlve design. It combines simple nd relible construction with superior performnce,
More informationPneumatic Actuators 1000, 1400, 2800, and 2 x 2800 cm² Type 3271 and Type 3277 for integral positioner attachment Hand-operated Actuator Type 3273
Pneumtic Actutors 000, 400, 2800, nd 2 x 2800 cm² Type 27 nd Type 277 for integrl positioner ttchment nd-operted Actutor Type 27 Appliction Liner ctutor in prticulr for ttchment to Series 240, 250, nd
More informationProduct range MEGAlife
Product rnge Fx enquiries: +49 89 76909-11 sles@iwis.com MEGAlife MEGAlife mintennce free roller nd conveyor chins cn be pplied in ll res where post instlltion lubriction is not t ll or only prtly possible.
More informationCREEK Technical Services, LLC
Technicl Services, LLC Certificte of uthoriztion No. 29824 17520 Edinburgh Dr Tmp, FL 33647 (813) 480-3421 EVLUTION REPORT FLORID BUILDING CODE, 6 TH EDITION (2017) Mnufcturer: VRITILE INC. Issued ugust
More information330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT TYPICAL ACCESS TO LEVELING 15
L CLL -800--600 R DIEBOLD 0 CSH DISPENSER THROUGH 0mm (") MXIMUM WLL 0mm ( 6" ) CEN I, CEN III GS, or CEN IV GS SFES CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE
More information2/2 Solenoid Operated Seat Valve, ISO Size 03
2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 20 l/min (5.3 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, with EX-sfty sol. coil Vlve: With crtridge vlve,
More information11 263/ Radial Piston Pump Model R4 /Series 2X Fixed Displacement. Ordering Code 1 PF 1 R4 2X R Replaces:
ize.60 to 0.00 Rdil iston ump Model R4 /eries X Fixed Displcement 0,0 I (00 br).9 in /rev (9.4 cm /rev) RA 6/0.9 RA 6/0.9 Replces: 06.89 K 6/ Rdil piston pump with 0 pistons nd prllel shft Chrcteristics:
More informationSMP-BC Mixproof Valve
. kythe Proven Mixproof Rnge SMP-BC Mixproof Vlve Concept SMP-BC is snitry pneumtic set vlve, designed for sfety nd lek detection when two different products flow through only one vlve. The vlve is often
More informationSpark Plug Fouling 3.0 Liter OptiMax
WARRANTY INFORMATION PARTS INFORMATION SERVICE INFORMATION Bulletin No. 2002-07 Circulte to: Sles Mnger Accounting Service Mnger Technicin Prts Mnger Sprk Plug Fouling 3.0 Liter OptiMx Models Affected
More information(mω) 1. Temperature ( C) Voltage (V) ULRG1 /
Resistors Metl Strip Current Sense Resistors Surfce Mount Metl Element Current Metl Element Sense Resistor UR Series UR Current Series Sense Resistor Mke Possible Resistnce R0005 (m ) to R015 (15m ) Metl
More informationMalleable Iron Pipe Fittings BS EN Patterns Sizes List Prices Prices effective from 1st September 2008 Exclusive of VAT.
Malleable Iron Pipe Fittings BS EN 10242 Patterns Sizes List Prices Prices effective from 1st September 2008 Exclusive of VAT. FM 20478 George Fischer Ltd. Profile of a Company In 1802 Johann Conrad Fischer
More informationPrint This Page. Return To Index
PLASTI-BOND REDH2OT KNOCKOUT HUBS KNOCKOUT HUBS PRST2 PRSTG2 Knockout Hubs Specifictions Knockout Hubs Configurtions ST STG2 b c STTB STTTB d COMPLIANCES PLASTI-BOND REDH 2 OT ST style knockout hubs re
More informationTFM 1600 Seat Body Material: Stainless. PTFE Seat Body Material: Stainless and Brass. Catalog No. V81-5 Sept. 2008
Ctlog No. V81-5 Sept. 2008 Vlve with lever hndle Working pressure sets: 68.9 br (1000 psig) TFM sets: 137 br (2000 psig) Vlve with butterfly hndle Working pressure sets: 68.9 br (1000 psig) TFM sets not
More informationHose Claw Couplings SKG 13-DR SKG 19-DR SKG 25-DR
Swivelling, IN 89 High qulity couplings, hed of mlleble iron, thred connections nd hose stem of turned steel with specil profile, zinc-plted nd yellow pssivted (free of chrome VI) with sfety notches 30
More informationSpecial Valves. Connection size G1/8 to G2. Contents Version Actuation Port size Page Characteristics. Instructions Overview. Electrical G1/8 G1/4
Contents Version Actution Port size Pge Chrcteristics Dimensions 3/2, 5/2 nd 5/3 Wy Vlves with NAMURconnections Series S9 5/2 Wy Vlves for Two Hnd Opertion Series S9 Time Dely Vlve for 2-Hnd Sfety Strt
More informationDIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CEN I, CEN III GAS, CEN IV GAS or CEN IV GAS EX SAFES
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER- FRONT LOD " DISPLY OR " DISPLY CEN I, CEN III GS, CEN IV GS or CEN IV GS EX SFES CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL
More informationPERSEUS ULTRA LOW PRESSURE
PERSEUS ULTRA LOW PRESSURE PF60 ATEX & IECEx Exd, Exi & INDUSTRIAL ULTRA LOW PRESSURE SWITCH This rnge of switches fetures robust high qulity housing with 1 or 2 seled SPDT microswitches nd hs been designed
More informationSolenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl
More informationMPC COBRA SERIES. Manually Programmable Cylindrical Lock D
51120-D MPC COBRA SERIES Mnully Progrmmle Cylindricl Lock 575 Birch Street Forestville, CT 06010 technicl support: 866-322-1237 fx: 866-322-1233 http://www.irsupport.net 57010-H 12-19-2005 Introduction
More informationLTV 29-2 and 39-2 angle nutrunners. Higher speed, lower energy consumption
LTV 29-2 nd 39-2 ngle nutrunners Higher speed, lower energy consumption Thumbs up for the LTV 9 series in customer trils LTV 29 tril rouses Ford s interest The Ford plnt in Cologne, Germny, with cpcity
More informationJUMO MIDAS C18 SW. OEM seawater pressure transmitter. Applications. Brief description. Customer benefits. Special features. Approvals/approval marks
Pge /8 JUMO MIDAS C8 SW OEM sewter pressure trnsmitter Applictions wter tretment reverse osmosis, e.g. sewter deslintion plnts purifiction plnts orgnic cids, e.g. cetic cid solutions contining chloride,
More informationSEE PAGES 3 AND 4 OF 7 FOR 3700 CASH RECYCLER THROUGH THE WALL WITH VESTIBULE TRIM KIT REFERENCE FRONT EDGE OF BEZEL FOR DEPTH DIMENSIONS
R DIEBOLD 00 LOBBY CSH RECYCLER- RER LOD L2 CLL -0--600 64 SFE (2 6 ") 40mm ( 6") CEN I SFE - " DISPLY OR " DISPLY WITH DETILS FOR OPTIONL VESTIBULE INSTLLTION CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH
More informationOPTIONAL 178mm (7") SPACER AVAILABLE FOR WALL THICKNESSES UP TO 152mm (6") 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT
L88 CLL -0--600 R DIEBOLD 0 CSH RECYCLER WITH COIN 40mm ( 6") CEN I, CEN III GS or CEN IV GS SFES THROUGH 0mm (") MXIMUM WLL 64 SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND
More informationIGNITION SYSTEM SERVICE MANUAL NUMBER
IGNITION SYSTEM SERVICE MANUAL NUMBER 26 Specifictions Timing Timing (At Idle rpm) 1 1 BTDC 2 / 1 ATDC 3 / 2 ATDC 4 1 Timing must be set using specil procedure s outlined in this section. Timing cnnot
More informationELECTRICAL SYSTEM 4 D INSTRUMENTATION
ELECTRICAL SYSTEM 4 D 72747 INSTRUMENTATION Tle of Contents Pge Identifiction............................. 4D-1 Specil Informtion....................... 4D-1 Lighting Options....................... 4D-1
More informationFree Machining Austenitic Ferritic + Martensitic Pure Titanium Titanium Alloys Stainless Steels Stainless Steels <950N/mm 2
& - Tps For Stinless Steels These top qulity Tps re mde in Switzerlnd, by DC-Swiss, one of the leding Tp Mnufcturers in Europe. All the Tps re mde of - (Powder Metl). This mteril hs proven to be the best
More informationSpring Return DuraDrive Two-Position Actuator
MA40-704x Series, MA4-707x Series, nd MA4-75x Series Spring Return DurDrive Two-Position Actutor For spring return pplictions tht require twoposition control of dmpers nd vlves in HVAC system. Fetures:
More informationRPE3-06. Functional Description HA /2008. Solenoid Operated Directional Control Valves. Replaces HA /2006
Solenoid Operted Directionl Control Vlves RE3-06 10/2008 Size 06 p mx up to 320 br Q mx up to 80 L/min Replces 11/2006 4/3, 4/2 wy directionl control vlves Solenoids cn be turned round their xis to ny
More informationJET PUMP. Table of Contents. Section 5 - Jet Pump
Tble of Contents JET PUMP Section 5 - Jet Pump JET PUMP Generl Informtion..................... 5-2 Principles of Opertion................ 5-2 Mster Specifictions Jet Pump........... 5-3 Specil Tools........................
More informationRPE3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated. Replaces HA /2009
Directionl Control Vlves Solenoid Operted RE3-06 Size D 06 (03) 350 br (5076 SI) 80 L/min(21 GM) Size D 06 (03) p mx 320 br (4641SI) ccording to CSA 80 L/min(21 GM) HA 4010 11/2011 Replces HA 4010 12/2009
More informationCOIN DISPENSER SIDE CAR FOR INSTALLATION NEXT TO DIEBOLD IN LOBBY TELLER (ILT) PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 7 CALL
SIDE CR FOR INSTLLTION NEXT TO DIEBOLD 00 - IN LOBBY TELLER (ILT) L2 CLL -800--600 CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE
More informationUPS Pure Sinewave UPS
UPS Pure Sinewve UPS USR S MANUAL 1.6K / 3.2K / 5KVA 6.4K / 8K/ 10KVA 1. INTRODUCTION 1. 1.1 Generl Description This UPS, powerful ll-in-one solution, delivers unsurpssed clen true sine wve output power
More informationDC CONTACTOR. hubbell industrial controls, inc. Hubbell Industrial Controls, Inc. Type Ampere 1500 Volt DC Contactor
Huell Industril Controls, Inc. 716 1600 Ampere 1500 Volt DC Contctor Ctlog 42716 Mrch 2013, Replces Septemer 2005 42716 Highlights Non-polrized rc chute (series lowout coil) design s stndrd Optionl polrized
More informationSSAB Water mains PIPES AND FITTINGS
SSAB Wter mins PIPES AND FITTINGS Pipes nd fittings mnufctured y SSAB re used primrily with wter pipeline sizes DN 400-1200. The fittings re mde of steel pressure pipes (ex works delivery) nd cn e coted
More informationThe widest range to provide the optimum tailor made solutions to your fume and gas extraction needs.
FUME XTRACTION ARMS Improving your workspce Chemicl resistnt Antisttic Stndrd FX ARMS The widest rnge to provide the optimum tilor mde solutions to your fume nd gs extrction needs. Avilble in Stndrd, Antisttic
More information330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT (2) EACH SIDE OF SAFE CEN I SAFE ONLY
L08 CLL -800--600 R CS 0 FULL FUNCTION TERMINL " OR " DISPLY - THROUGH THE WLL 0mm (") 40mm ( 6") CEN I, CEN III GS OR CEN IV GS SFES SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS
More information203mm (8") MAXIMUM WALL THICKNESS IN AREA OF UNIT NOTE: 203mm (8") MAXIMUM WALL THICKNESS IN AREA OF UNIT (2) EACH SIDE OF SAFE CEN I SAFE ONLY
L0 CLL -800--600 R CS 0 FULL FUNCTION VESTIBULE TERMINL " OR " DISPLY-THROUGH 0mm ( MXIMUM WLL 40mm ( 6") CEN I, CEN III GS or CEN IV GS SFES SFE ( 6 ") CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR
More informationDecor Radiators Baseboard
Decor Rditors Bsebord Pedestl 11 (with fins) Avilble in outputs from 1,561 to 10,282 Btu/hr; 2, nd 4 tubes high. 28 (igh Output, with fins) Avilble in outputs from 5,05 to 19,552 Btu/hr; 2 nd 4 tubes high.
More information2/2 Solenoid Operated Seat Valve, ISO Size 03
2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, electriclly operted 1 Description 2 echnicl dt
More informationDIEBOLD IN LOBBY TELLER (ILT) PORTRAIT OR LANDSCAPE INSTALLED WITH A COIN RECYCLER SIDE CAR PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 7
L2 CLL -800--600 TP-826-00. R CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE DIEBOLD 00 - IN LOBBY TELLER (ILT) PORTRIT OR LNDSCPE
More informationCable Trolleys for C-Rails Program
Cble Trolleys for C-Rils Progrm 02 0 0260 Contents C-Ril nd Accessories Progrm 02 C-Ril x... 2 Trck Coupler... 2 End Stop... 2 Trck Support Brcket... 2 Support Arm nd Girder Clip... 3 Brcket... 3 Cble
More informationAll the work described in sections A, B, C, D, and E must be carried out in full before the wheel/tyre combination may be used.
mb cdef Instlltion Instructions Conversion to 16-inch tyres nd 7 1/2 J _ 16 H 2 ET 40 disk wheel 40.11 Model 124 Excluding vehicles with specil bodywork, sedns with long wheelbse nd 124.031/036/051/091/290/393.
More information* * * DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CONSUMER ACCESS DIMENSIONS PLAN VIEW 19" DISPLAY FRONT ELEVATION
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER- FRONT LOD " DISPLY OR " DISPLY WITH mm ( ") UL SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE
More informationTransmission and Driveline. Section 2A - Transmission and Driveline
Trnsmission nd Driveline Trnsmission nd Driveline Tle of Contents Section 2A - Trnsmission nd Driveline 2 A Generl Informtion...2A-2 Ger Rtio Selection...2A-2 Engine nd Propeller Shft Instlltion Angle...2A-2
More informationPrecision Pressure Transmitter with Switching Contacts and Display. Interface Setup program. Display 4 characters. Switching output 1.
Dt sheet 405054 Pge 1/7 JUMO DLOS HP Precision Pressure Trnsmitter with Switching Contcts nd Disply Appliction Hydrulic plnts Mchine nd plnt engineering Test benches Lbortory equipment Brief description
More informationCONTROL VALVES FOR GRINDER. Installation, Maintenance and Operating Instructions 5 GA 71 en Issue 5/02
CONTROL VALVES FOR GRINDER Instlltion, Mintennce nd Operting Instructions 5 GA 71 en Issue 5/02 2 Tble of Contents 1 OPERATION......................... 3 1.1 Generl......................... 3 1.2 Min components.................
More informationJUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits
Mckenrodtstrße 4 609 Fuld, Allemgne 605 Fuld, Allemgne Tél. : +49 66 600-0 Fx. : +49 66 600-607 B.P. 4500 57075 Metz Cedex, Frnce Tél. : + 87 7 5 00 Fx. : + 87 7 89 00 Industriestrße 8 4700 Eupen, Belgique
More information2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03
2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 20 l/min, p mx = 315 r idirectionl set-vlve shut-off, direct cting, electriclly operted 1 Description he W2N / W2 series of 2/2 4/4 solenoid operted
More information4/2- and 4/3-way shut-off valve
Courtesy of CMA/Flodyne/Hydrdyne Motion Control Hydrulic Pneumtic Electricl Mechnicl (00) 426-540 www.cmfh.com 4/2- nd 4/3-wy shut-off vlve Type Z4WE Size 6 Component series 3X Mximum operting pressure
More informationDIEBOLD 5550 CASH DISPENSER THROUGH 330mm (13") MAXIMUM WALL PLAN VIEW FRONT ELEVATION SIDE ELEVATION CONSUMER ACCESS DIMENSIONS
L0 CLL -800--600 R DIEBOLD 0 CSH DISPENSER THROUGH 0mm (") MXIMUM WLL mm ( " ) UL CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE
More informationABS PIPES & FITTINGS THE INDUSTRY STANDARD FOR A WIDE RANGE OF APPLICATIONS
S PIPES & FITTINGS THE INDUSTRY STNDRD FOR WE RNGE OF PPLICTIONS VUX VERSION 2 S PIPE & FITTINGS FOR INDUSTRIL PPLICTIONS INTRODUCTION S thermoplastics are recognized as a suitable material to be used
More informationHarmer Roof Drainage The Cast Iron Range
Cst Iron Roof Outlets - Introduction Hrmer Roof Dringe The Cst Iron Rnge The high qulity Cst Iron Roof Outlet rnge, feturing medium sump nd lrge sump odies, two-wy outlets nd n extensive rnge of lodering
More informationUBAN Series. Direct operated pressure reducing valve. Suitable for: Air & process gases. Liquids. Steam. Markets: Oil & gas. Blanketing systems
UBAN Series Direct operted pressure reducing vlve Suitble for: Air & process gses Liquids Stem Mrkets: Oil & gs Blnketing systems Generl industry Power CC0032E - Rev. 1 14/01/2010 UB REGULATORS UBAN Series:
More informationFINGER STRIPS. and other EMI shielding products. Characteristics
BERYLLIUM COPPER CONTCT FINGER STRIPS nd other EMI shielding products ppliction Due to their outstnding mteril nd electricl chrcteristics, eryllium copper fingers of different shpes nd dimensions re used
More informationCS 7750 FULL FUNCTION TERMINAL 15" OR 19" DISPLAY - THROUGH THE WALL 330mm (13")
L08 CLL -800--600 " OR " DISPLY - THROUGH THE WLL 0mm (") 40mm ( 6") CEN I CONSULT WITH DIEBOLD NIXDORF INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE
More informationApplication Examples of Air-piloted Valves
ir-piloted Vlves Fetures Since the unit requires ir piping only, with no need for electricl wiring, it cn e hndled y person without fer of electricl shocks or current lekge. Using no electricity mens tht
More informationData Sheet T /4/5/6 EN
Dt heet T 8310-1/4/5/6 EN Pneumtic Actutors up to 750v2 cm² Type 3271 Type 3277 for integrl positioner ttchment Appliction Liner ctutors prticulrly suitble for ttchment to eries 240, 250, 280 nd 290 Vlves
More informationDescription Individual Reduction Gearbox Model: 2:60mm Gear Type: GN:Helical Gear Reduction Ratio: 3:1 to 200:1 Bearing Type: K:Ball Bearing
6-10W ist of Motor Chrcteristics No od od Prmeters Prmeters Model of Motor Voltge Power Speed Current Speed Torque Current Brush ife Motor Weight V W RPM A RPM m A H kg. Z2D06-12 12 6 00 0.6 Mx. 2950 19
More informationElectrically operated directional spool valve with a soft-shift function type WE10P NS 10. up to 35 MPa up to 120 DATA SHEET - OPERATION MANUAL
LICTION Electriclly operted directionl spool vlve with soft-shift function type WE10 NS 10 Electriclly operted directionl spool vlve type WE10 is intended for chnging the direction of fluid flow in hydrulic
More informationGeorg Fischer Waga N.V. Your mechanical connection for plastic pipes restraint - non restraint d63 - d315. Products. Plast/Joint
Georg Fischer Wg N.V. Your mechnicl connection for plstic pipes restrint - non restrint - Proucts Plst/Joint Plst/Joint >> Your mechnicl restrint connection for plstic pipes >> With the increse use of
More information9900 IN LOBBY TELLER - (ILT) PORTRAIT AND LANDSCAPE DISPLAY PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 6 CALL
00 IN LOBBY TELLER - (ILT) PORTRIT ND L CLL -800--600 40mm ( 6") CEN I / CEN III GS / CEN IV GS SFES CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND
More information@ ECV Technical Data High Lift Pallet Truck. ECV 10 C ECV 10i C ECV 10
@ ECV Technicl Dt High Lift Pllet Truck ECV 10 C ECV 10i C ECV 10 Lifting Mde Esy This specifiction sheet to VDI Guideline 198, only provides the technicl vlues for the stndrd truck. Different tyres, other
More informationSTEEL WIRE & ROPE FITTINGS
6 Contents Bever mintins wie rnge of wire rope n fittings tht cn be use for towing n lifting, pplictions. Furthermore Bever hs the bility to offer mnufcture slings me to orer. With Bever s ISO Qulity n
More informationSTANDARD AND FULL HEIGHT - REAR LOAD - WITH 40mm (1 16") CEN I, CEN III GAS or CEN IV GAS SAFES
L STNDRD ND FULL HEIGHT - RER LOD - WITH 0mm ( 6") "LL DIMENSIONS ND DESIGN CRITERI PGE OF 8 FRONT - STNDRD HEIGHT SEE PGES and FOR CS 00 STNDRD HEIGHT DETILS FRONT - FULL HEIGHT SEE PGES and FOR CS 00
More informationDIEBOLD 3750 CASH RECYCLER TERMINAL. 13mm ( 2") UL SAFE - 15" OR 19" DISPLAY THROUGH THE WALL 330mm (13") PLAN VIEW FRONT ELEVATION SECTION
L8 CLL -800--600 R DIEBOLD 0 CSH RECYCLER TERMINL mm ( ") UL SFE - " OR " DISPLY THROUGH THE WLL 0mm (") 64 SFE ( 6 ") CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE
More informationLincoln Under-cabinet Light Installation Instructions
Lincoln Under-cbinet Light Instlltion Instructions #1500178 Rev A Congrtultions on your new Lincoln Under-cbinet Light! Whether purchsed for its significnt energy svings nd efficiency, lower lifetime costs,
More informationChapter URL:
This PDF is selection from n out-of-print volume from the Ntionl Bureu of Economic Reserch Volume Title: Price nd Quntity Trends in the Foreign Trde of the United Sttes Volume Author/Editor: Robert E.
More information4/3-4/2 Directional valve elements L8_81 (ED4-P1) with or without LS connections. RE Edition: Replaces:
4/ - 4/ Directionl vlve elements L8_81 with proportionl (ED4-1) control nd with or without LS connections L8_81 (ED4-1) RE 181-1 Edition: 9.18 Replces: 7.1.17 Size Series Mximum operting pressure r (4
More informationConversion to 235/45 R 17 tyres and 8 J x 17 H 2 ET 28 disk wheel 40.01
mb s Instlltion Instructions Conversion to 235/45 R 17 tyres nd 8 J x 17 H 2 ET 28 disk wheel 40.01 Model 124 Excluding vehicles with specil bodywork, sedns with long wheelbse nd 124.020/036/120. All the
More informationUnit 2. DC Motors and Generators UNIT OBJECTIVE DISCUSSION OF FUNDAMENTALS. Operating principle of dc motors
Unit 2 DC Motors nd Genertors UNIT OBJECTIVE DISCUSSION OF FUNDAMENTALS When you hve completed this unit, you will be ble to use the DC Motor/Genertor module to demonstrte nd explin the opertion of dc
More informationFUEL SYSTEM. Section 3A Pulse Crankcase Driven Fuel Pump. Model 200/225 DFI. 1. Fuel Pressure/Vacuum Gauge (0-15 psi) (Obtain Locally)
FUEL SYSTEM Section 3A Pulse Crnkcse Driven Fuel Pump Tle of Contents Specifictions................................ 3A-1 Specil Tools................................ 3A-1 Fuel Pump..................................
More informationDPST-NO None 2 channels Auto-reset Inverse 24 VAC/VDC G9SB-2002-A 4 1 channel or 2
Sfety Rely Unit Ultr Slim Sfety Rely Unit Models of width 17.5 mm vilble with 2 or 3 poles. Models of width 22.5 mm with 3 poles lso vilble. Conforms to EN stndrds. (TÜV pprovl) DIN trck mounting possible.
More informationCommercial Condensing Units
COMMERCIAL C O N D E N S I N G UNITS Commercil Condensing s Heronhill Air Conditioning AN INTRODUCTION TO... Commercil Condensing s J & E Hll Fusion nd Fusion Scroll units offer the perfect solution for
More informationTwo-Position Electric Duplex Room Thermostats
TC-xx Series, TC-xx Series, TF- Series Two-Position Electric Duplex Room Thermostts These thermostts provide on-off control of heting/cooling systems. Fetures: Seprte units for C nd F. All units except
More informationPush-in RTD temperature probe for heat meters with connecting cable for thermowells (type PS/PL)
elivery ddress: Mckenrodtstrße 14 36039 Fuld, Germny Postl ddress: 36035 Fuld, Germny Fx: +49 661 6003-607 Emil: mil@jumo.net Temple Bnk, Riverwy Hrlow, Essex, CM20 2Y, UK Fx: +44 1279 62 50 29 Emil: sles@jumo.co.uk
More information4/3, 4/2 and 3/2 explosion-proof solenoid directional valve
01/06 4/3, 4/2 nd 3/2 explosion-proof solenoid directionl vlve Type G...WE6...L6X 2.21 Size (NG) 6 Up to 350 br Up to 80 L/min Contents Function nd configurtion Specifictions 03 Spool symbols 03 Technicl
More informationTITAN ULTRA LOW. PF266 ATEX/IECEx Exd, Exia & INDUSTRIAL ULTRA LOW PRESSURE SWITCH FEATURES ULTRA LOW PRESSURE
IAN ULRA LOW PF266 AEX/IECEx Exd, Exi & INDUSRIAL ULRA LOW SWICH his rnge hs been used to monitor extremely smll chnges in pressure nd hs been specified extensively for offshore pplictions. Incorporting
More informationPERSEUS MEDIUM PRESSURE PF61 & PF62 PERSEUS ATEX/ IECEx OR TRI- CERTIFIED WITH AEx (NEC 505) Exd, Exia & INDUSTRIAL PRESSURE SWITCH
PERSEUS MEDIUM PRESSURE PF6 & PF62 PERSEUS ATEX/ IECEx OR TRI- CERTIFIED ITH AEx (NEC 5) Exd, Exi & INDUSTRIAL PRESSURE SITCH This rnge of switches fetures robust high qulity housing with or 2 seled SPDT
More informationDuct LKR Bends LBR LBXR S-bend LBSR Taper LDR Rect-to-round transition LFR
LindRekt LindRekt mens rectngulr ventiltion ducts nd fittings. These re mde in oth stndrd nd specil versions. The product rnge lso includes complete, esily used joining system. Contents LindRekt Generl
More informationJUMO MIDAS S05 OEM pressure transmitter - universal
Delivery ddress: Mckenrodtstrße 4 609 Fuld, Germny Postl ddress: 605 Fuld, Germny Phone: +49 66 600-0 Fx: +49 66 600-607 Hrlow, Essex CM0 DY, UK Phone: +44 79 655 Fx: +44 79 656 Cnstot, NY 0, USA Phone:
More informationABB industrial drives. Mechanical installation instructions ACS880 multidrive cabinets
ABB industril drives Mechnicl instlltion instructions ACS880 multidrive cbinets List of relted mnuls Generl drive mnuls (in ll deliveries) Electricl plnning instructions for ACS880 multidrive cbinets nd
More information