UPS Pure Sinewave UPS
|
|
- Melinda Bertha Holland
- 5 years ago
- Views:
Transcription
1 UPS Pure Sinewve UPS USR S MANUAL 1.6K / 3.2K / 5KVA 6.4K / 8K/ 10KVA 1. INTRODUCTION Generl Description This UPS, powerful ll-in-one solution, delivers unsurpssed clen true sine wve output power nd combines this with powerful bttery chrging current. Applicble for ny kind of lods such s ir conditioner, home pplinces, consumer electronic nd office equipments. This series fetures durble & continuous 24 opertion. The built-in intelligent chrger utomticlly chrges ny type of btteries without the risk of overchrge. The compct & modulr design mkes utility interctive instlltions esier nd more cost effective. It is high qulity product tht offers the best price/performnce rtio in the industry. 1.2 Key fetures Multiple microprocessor design bse. User Friendly LCD Control Pnel Comptible with both liner & non-liner lod. Powerful chrger to support btteries of 500AH up. 24 hours opertion for Long Time Bck Up DC strt. THD less thn 3%. High efficiency design to sve electricity. Design to operte under hrsh environment Power Tech Interntionl Group sles@powertech-group.com Importnt Notices 1. Red instructions crefully before operting the UPS. 2. UPS power connect instruction should be followed. 3. Plese don t open the cse to prevent dnger. 5. Retin the lod within the rting of UPS to prevent fults. 6. Keep the UPS clen nd dry.
2 2. SAFTY INSTRUCTIONS 2.1 Trnsporting RISK OF LCTRIC SHOCK Do not open unless for Qulified Personnel Plese red crefully the instructions before working on this product. 1. Disconnect ll power cbles if necessry. 2. Be creful not to dmge the UPS while trnsporting. 3. Don t move the UPS upside down. 4. Plese trnsport the UPS system only in the originl pckging to protect it ginst shock nd impct. 2.2 Positioning 1. Do not put the UPS on rugged or declined surfce. 2. Do not instll the UPS system ner wter or in dmp environments. 3. Do not instll the UPS system where it would be exposed to direct sunlight or ner het. 4. Do not block off ventiltion openings in the UPS system s housing nd don t leve objects on the top of the UPS. 5. Keep the UPS fr wy from het emitting sources. 6. Do not expose it to corrosive gs. 7. Ambient temperture : Instlltion 1. Connect the UPS system only to n erthed shockproof socket outlet. 2. Plce cbles in such wy tht no one cn step on or trip over them. 2.4 Opertion 1. Do not disconnect the mins cble on the UPS system or the building wiring socket outlet during opertions since this would cncel the protective erthing of the UPS system nd of ll connected lods. 2. The UPS hs its own power source (btteries). The output terminls my be live even when the UPS is not connected to the AC supply. 3. nsure tht no fluids or other foreign objects cn enter the UPS system. 2.5 Mintennce nd Service 1. ven fter the unit is disconnected from the mins power supply (building wiring socket outlet), components inside the UPS system re still connected to the bttery nd re still electriclly live nd dngerous. 2. Before crrying out ny kind of servicing nd/or mintennce, disconnect the btteries nd verify tht no current is present. 3. Btteries my cuse electric shock nd hve high short-circuit current. Plese tke the precutionry mesures specified below nd ny other mesures necessry when working with btteries: - remove wristwtches, rings nd other metl objects - use only tools with insulted grips nd hndles.
3 3. CABL CONNCTION 4. SYSTM DSCRIPTION 3.1 Inspection 1. The system my be instlled nd wired only by qulified electricins in ccordnce with pplicble sfety regultions. 2. When instlling the electricl wiring, plese note the nominl mperge of your incoming feeder. 3. Inspect the pckging crton nd its contents for dmge. Plese inform the vendor immeditely if you find signs of dmge. Plese keep the pckging in sfe plce for future use. 4. Plese ensure tht the incoming feeder is isolted nd secured to prevent it from being switched bck on gin. 4.1 Front Pnel Description ( 1 ) 3.2 Connection UPS Input nd Output Connection: Connect the input nd output wires to the corresponding input nd output terminls ccording to the following digrm. ( 5 ) ( 7 ) ( 6 ) Terminl for 120V System Models Terminl for 230V System Models ( 2 ) ( 3 ) ( 4 ) 1. LCD Disply: indictes the UPS opertion informtion, including UPS sttus, input/output voltge, input/output frequency, bttery cpcity, output lod, temperture, etc. 2. Input: press to disply Input Voltge nd Frequency on the LCD Disply. 3. Output: press to disply Output Voltge nd Frequency on the LCD Disply. 4. Bttery: press to disply Bttery Voltge nd Lod percentge on the LCD Disply 5. Fult LD (red): indictes the UPS is in fult condition becuse of inverter shutdown or btteries needs to be replced. 6. Bck Up LD (yellow): To indicte the UPS is in bttery bck-up mode. 7. Norml LD (green): To indicte the UPS is operting normlly.
4 4.2 Outline Description For 6.4KVA. 8KVA. 10KVA For 1.6KVA. 3.2KVA. SKVA ---- (W) 413mm.... ; 0 I r (o) 182m...! (Q)...,.(W) 413mrrr hl... c., D C,&DQ - I l.l ':. : r (o) 182mm i : J 0 0 ('I) I 11 I I I.:1 p 1'. 0 'Oi;f" I 'Oi;f".-. J:... l}..... INPUT I OUTPU-fTRMINAL BLOCK INPUT I OUTPU-fTRMINAL BLOCK 5. UPS OPRATION
5 5.1 Check Prior to Strt Up 1. nsure the UPS is in suitble positioning. 2. Check input cord is secured. 3. Mke sure the lod is disconnected or in the OFF position. 4. Check if input voltge meets the UPS rting required. 6.2 Norml Opertion There re two min loops when AC utility is norml: the AC loop nd the bttery chrging loop. The AC output power comes from AC utility input nd psses through sttic switch to support power to lod. The bttery chrging voltge comes from AC utility input nd converted by AC/DC chrger to support btterychrging power. 5.2 Storge Instruction Disconnect input power in rer pnel if you will not use it for long period. If the UPS is stored over 3 months, plese keep supplying power to the UPS for t lest 24 hours to ensure bttery fully rechrged. 6. OPRATION MODS OF TH UPS 6.1 UPS System Block Digrm 6.3 AC Utility Filure (Bttery Mode) The AC output comes from bttery, pssing through DC/AC inverter nd sttic switch within the bttery bckup time.
6 7. SPCIFICATION OF UPS Power Tech Interntionl Group
* * * DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CONSUMER ACCESS DIMENSIONS PLAN VIEW 19" DISPLAY FRONT ELEVATION
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER- FRONT LOD " DISPLY OR " DISPLY WITH mm ( ") UL SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE
More informationDPST-NO None 2 channels Auto-reset Inverse 24 VAC/VDC G9SB-2002-A 4 1 channel or 2
Sfety Rely Unit Ultr Slim Sfety Rely Unit Models of width 17.5 mm vilble with 2 or 3 poles. Models of width 22.5 mm with 3 poles lso vilble. Conforms to EN stndrds. (TÜV pprovl) DIN trck mounting possible.
More informationDIEBOLD 3750 CASH RECYCLER TERMINAL. 13mm ( 2") UL SAFE - 15" OR 19" DISPLAY THROUGH THE WALL 330mm (13") PLAN VIEW FRONT ELEVATION SECTION
L8 CLL -800--600 R DIEBOLD 0 CSH RECYCLER TERMINL mm ( ") UL SFE - " OR " DISPLY THROUGH THE WLL 0mm (") 64 SFE ( 6 ") CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE
More informationCORD/CORDLESS CLIPPER INSTRUCTIONS
CORD/CORDLESS CLIPPER INSTRUCTIONS Plese red ll instructions crefully to fmilirise yourself with your new clipper efore using. Sve these instructions for further reference. For ny further ssistnce or informtion
More informationDIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CEN I, CEN III GAS, CEN IV GAS or CEN IV GAS EX SAFES
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER- FRONT LOD " DISPLY OR " DISPLY CEN I, CEN III GS, CEN IV GS or CEN IV GS EX SFES CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL
More information330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT TYPICAL ACCESS TO LEVELING 15
L CLL -800--600 R DIEBOLD 0 CSH DISPENSER THROUGH 0mm (") MXIMUM WLL 0mm ( 6" ) CEN I, CEN III GS, or CEN IV GS SFES CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE
More informationELECTRICAL SYSTEM 4 D INSTRUMENTATION
ELECTRICAL SYSTEM 4 D 72747 INSTRUMENTATION Tle of Contents Pge Identifiction............................. 4D-1 Specil Informtion....................... 4D-1 Lighting Options....................... 4D-1
More informationEFFEKTA. Solar inverter HX-Series NEU / NEW
EFFEKTA Power Supplies EFFEKTA Hungry Kft. H-678 Szeged, Dorozsmi út. inverter Solr inverter HX-Series Multifunctionl Photovoltic inverter for off-grid stnd-lone opertion s well s grid-connected opertion
More informationDIEBOLD 5550 CASH DISPENSER THROUGH 330mm (13") MAXIMUM WALL PLAN VIEW FRONT ELEVATION SIDE ELEVATION CONSUMER ACCESS DIMENSIONS
L0 CLL -800--600 R DIEBOLD 0 CSH DISPENSER THROUGH 0mm (") MXIMUM WLL mm ( " ) UL CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE
More information* * * 3700 LOBBY CASH RECYCLER. REAR LOAD 13mm ( 2") UL SAFE - 15" DISPLAY OR 19" DISPLAY WITH DETAILS FOR OPTIONAL VESTIBULE INSTALLATION
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER RER LOD mm ( ") UL SFE - " DISPLY OR " DISPLY WITH DETILS FOR OPTIONL VESTIBULE INSTLLTION CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR
More informationSEE PAGES 3 AND 4 OF 7 FOR 3700 CASH RECYCLER THROUGH THE WALL WITH VESTIBULE TRIM KIT REFERENCE FRONT EDGE OF BEZEL FOR DEPTH DIMENSIONS
R DIEBOLD 00 LOBBY CSH RECYCLER- RER LOD L2 CLL -0--600 64 SFE (2 6 ") 40mm ( 6") CEN I SFE - " DISPLY OR " DISPLY WITH DETILS FOR OPTIONL VESTIBULE INSTLLTION CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH
More informationSTANDARD AND FULL HEIGHT - REAR LOAD - WITH 40mm (1 16") CEN I, CEN III GAS or CEN IV GAS SAFES
L STNDRD ND FULL HEIGHT - RER LOD - WITH 0mm ( 6") "LL DIMENSIONS ND DESIGN CRITERI PGE OF 8 FRONT - STNDRD HEIGHT SEE PGES and FOR CS 00 STNDRD HEIGHT DETILS FRONT - FULL HEIGHT SEE PGES and FOR CS 00
More informationSpark Plug Fouling 3.0 Liter OptiMax
WARRANTY INFORMATION PARTS INFORMATION SERVICE INFORMATION Bulletin No. 2002-07 Circulte to: Sles Mnger Accounting Service Mnger Technicin Prts Mnger Sprk Plug Fouling 3.0 Liter OptiMx Models Affected
More information3700 LOBBY CASH RECYCLER. REAR LOAD 13mm ( 2") UL SAFE - 15" DISPLAY OR 19" DISPLAY WITH DETAILS FOR OPTIONAL VESTIBULE INSTALLATION
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER RER LOD mm ( ") UL SFE - " DISPLY OR " DISPLY WITH DETILS FOR OPTIONL VESTIBULE INSTLLTION CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR
More informationABB industrial drives. Mechanical installation instructions ACS880 multidrive cabinets
ABB industril drives Mechnicl instlltion instructions ACS880 multidrive cbinets List of relted mnuls Generl drive mnuls (in ll deliveries) Electricl plnning instructions for ACS880 multidrive cbinets nd
More information330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT (2) EACH SIDE OF SAFE CEN I SAFE ONLY
L08 CLL -800--600 R CS 0 FULL FUNCTION TERMINL " OR " DISPLY - THROUGH THE WLL 0mm (") 40mm ( 6") CEN I, CEN III GS OR CEN IV GS SFES SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS
More information203mm (8") MAXIMUM WALL THICKNESS IN AREA OF UNIT NOTE: 203mm (8") MAXIMUM WALL THICKNESS IN AREA OF UNIT (2) EACH SIDE OF SAFE CEN I SAFE ONLY
L0 CLL -800--600 R CS 0 FULL FUNCTION VESTIBULE TERMINL " OR " DISPLY-THROUGH 0mm ( MXIMUM WLL 40mm ( 6") CEN I, CEN III GS or CEN IV GS SFES SFE ( 6 ") CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR
More informationCOIN DISPENSER SIDE CAR FOR INSTALLATION NEXT TO DIEBOLD IN LOBBY TELLER (ILT) PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 7 CALL
SIDE CR FOR INSTLLTION NEXT TO DIEBOLD 00 - IN LOBBY TELLER (ILT) L2 CLL -800--600 CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE
More informationSpecial Valves. Connection size G1/8 to G2. Contents Version Actuation Port size Page Characteristics. Instructions Overview. Electrical G1/8 G1/4
Contents Version Actution Port size Pge Chrcteristics Dimensions 3/2, 5/2 nd 5/3 Wy Vlves with NAMURconnections Series S9 5/2 Wy Vlves for Two Hnd Opertion Series S9 Time Dely Vlve for 2-Hnd Sfety Strt
More information9900 IN LOBBY TELLER - (ILT) PORTRAIT AND LANDSCAPE DISPLAY PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 6 CALL
00 IN LOBBY TELLER - (ILT) PORTRIT ND L CLL -800--600 40mm ( 6") CEN I / CEN III GS / CEN IV GS SFES CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND
More informationOPTIONAL 178mm (7") SPACER AVAILABLE FOR WALL THICKNESSES UP TO 152mm (6") 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT
L88 CLL -0--600 R DIEBOLD 0 CSH RECYCLER WITH COIN 40mm ( 6") CEN I, CEN III GS or CEN IV GS SFES THROUGH 0mm (") MXIMUM WLL 64 SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND
More informationCS 7780 FULL FUNCTION DRIVE-UP TERMINAL
L CLL -800--600 CS 80 FULL FUNCTION DRIVE-UP TERMINL mm ( ") UL - "or " DISPLY THROUGH 0mm (8") MXIMUM WLL CONSULT WITH DIEBOLD NIXDORF INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE
More informationCONTENTS 1. INTRODUCTION SAFTY INSTRUCTION CABLE CONNECTION SYSTEM DESCRIPTION INVERTER OPERATION...
CONTENTS 1. INTRODUCTION...... 1 2. SAFTY INSTRUCTION.......... 2 3. CABLE CONNECTION.......... 4 4. SYSTEM DESCRIPTION............ 5 5. INVERTER OPERATION... 11 6. TROUBLE SHOOTING GUIDE....... 16 7.
More informationSafety Relay Unit. Ordering Information. Ultra Slim Safety Relay
Sfety Rely Unit Ultr Slim Sfety Rely Unit Models of width 17.5 mm (smllest Unit in the world s of Jnury 2001) vilble with 2 or 3 poles. Models of width 22.5 mm with 3 poles lso vilble. EN stndrds (TÜV
More informationDIEBOLD IN LOBBY TELLER (ILT) PORTRAIT OR LANDSCAPE INSTALLED WITH A COIN RECYCLER SIDE CAR PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 7
L2 CLL -800--600 TP-826-00. R CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE DIEBOLD 00 - IN LOBBY TELLER (ILT) PORTRIT OR LNDSCPE
More informationCS 7750 FULL FUNCTION TERMINAL 15" OR 19" DISPLAY - THROUGH THE WALL 330mm (13")
L08 CLL -800--600 " OR " DISPLY - THROUGH THE WLL 0mm (") 40mm ( 6") CEN I CONSULT WITH DIEBOLD NIXDORF INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE
More information@ ECV Technical Data High Lift Pallet Truck. ECV 10 C ECV 10i C ECV 10
@ ECV Technicl Dt High Lift Pllet Truck ECV 10 C ECV 10i C ECV 10 Lifting Mde Esy This specifiction sheet to VDI Guideline 198, only provides the technicl vlues for the stndrd truck. Different tyres, other
More informationDIESEL EGT GAUGE INSTALLATION INSTRUCTIONS P14D AA
DIESEL EGT GUGE INSTLLTION INSTRUCTIONS P4D4-9235- Revision: - Dated 3/9/4 Replaces: None DIESEL EGT GUGE INSTLLTION HRDWRE CONTENTS P4D4-44- - DIESEL EGT GUGE KIT COMPONENT - DIESEL EGT GUGE SSY (PRT
More informationTA25DU0.4 Overload Relay a. Features. Descriptions
3804 South Street 7594-723, TX Ncogdoches Phone: 93-59-7941 Fx: 93-50-485 0.4 Overlod Rely-0.25 0.4 Thoms&Betts-Abb Ins Prod Ctlog Number Mnufcturer Description Weight per unit Product Ctegory Fetures
More informationCONTENTS 1. INTRODUCTION SAFTY INSTRUCTION CABLE CONNECTION SYSTEM DESCRIPTION OPERATION... 9
USER MANUAL 1 CONTENTS 1. INTRODUCTION... 1 2. SAFTY INSTRUCTION... 3 3. CABLE CONNECTION... 4 4. SYSTEM DESCRIPTION... 5 5. OPERATION... 9 6. TROUBLE SHOOTING GUIDE... 25 7. OPERATION MODES..... 27 8.
More informationRPE3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated. Replaces HA /2009
Directionl Control Vlves Solenoid Operted RE3-06 Size D 06 (03) 350 br (5076 SI) 80 L/min(21 GM) Size D 06 (03) p mx 320 br (4641SI) ccording to CSA 80 L/min(21 GM) HA 4010 11/2011 Replces HA 4010 12/2009
More informationInstallation and Operational Instructions for ROBA -slip hubs Sizes 0 12 (B.1.0.GB)
Plese red these Opertionl Instructions crefully nd follow them ccordingly! Ignoring these Instructions my led to mlfunctions or to clutch filure, resulting in dmge to other prts. These Instlltion nd Opertionl
More informationELECTRICAL. Table of Contents. Section 2A - Ignition
Tble of Contents Specifictions........................... A- Specil Tools........................... A- Flywheel............................... A- Flywheel............................... A-5 Electricl
More informationSuspension Control Module
User Mnul Suspension Control Module 0099 Before Instlltion Wrning: This owering Module should be instlled by n individul with extensive knowledge in electronics, including: wire identifiction, extrcting
More informationAIRCRAFT ENGINES SERVICE INSTRUCTION ENGINE START AT LOW TEMPERATURES AT ROTAX SI R1
d03161 RECOMMENDED AIRCRAFT ENGINES SERVICE INSTRUCTION ENGINE START AT LOW TEMPERATURES AT ROTAX ENGINE TYPE 912 AND 914 (SERIES) Repeting symbols: Plese, py ttention to the following symbols throughout
More informationRPEA3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated with 8W Coil. Replaces HA /2007
Directionl Control Vlves Solenoid Operted with 8W Coil RPEA3-06 0/20 Size 06 (D 03) 350 br (5076 PSI) 80 L/min (2 GPM) Replces 2/2007 /3-, /2- wy directionl control vlves Enclosure type to IP65 Push button
More informationSpecifications/Instructions AB-7353-U. General. Features
Specifictions/Instructions ACTIVAL Motorized Two-Wy Vlve with Flnged-End Connection for High Differentil Pressure Appliction (ANSI Clss125 equivlent /
More informationJUMO MIDAS S05 OEM pressure transmitter - universal
Delivery ddress: Mckenrodtstrße 4 609 Fuld, Germny Postl ddress: 605 Fuld, Germny Phone: +49 66 600-0 Fx: +49 66 600-607 Hrlow, Essex CM0 DY, UK Phone: +44 79 655 Fx: +44 79 656 Cnstot, NY 0, USA Phone:
More informationJUMO MIDAS C18 SW. OEM seawater pressure transmitter. Applications. Brief description. Customer benefits. Special features. Approvals/approval marks
Pge /8 JUMO MIDAS C8 SW OEM sewter pressure trnsmitter Applictions wter tretment reverse osmosis, e.g. sewter deslintion plnts purifiction plnts orgnic cids, e.g. cetic cid solutions contining chloride,
More informationArcadia ssembly Instructions. 501x363x242cm / 16 5"Lx11 103/4"x7 111/4"
A ssemly Instructions Arcdi 5000 English_71087 501x36342cm / 16 5"Lx11 103/4"x7 111/4" Compny informtion: Plrm Americs Inc. 9735 Commerce Prkwy Kutztown, PA, USA Service Center: Toll Free: (877) 627-8476
More informationEnergy Recovery Ventilator
PEG1610044CE Version:1601 Service Mnul Energy Recovery Ventiltor (North meric Mrket) WRNING This service informtion is designed for experienced repir technicins only nd is not designed for use by the generl
More information2190DF / 2575DF / 2700DF / 2702DF FIRE THEFT SAFE WITH DIGITAL LOCK. Operation and Installation Guide. MANUAL # M
Opertion nd Instlltion Guide 2190DF / 2575DF / 2700DF / 2702DF MANUAL # M08-0284-004 www.firstalert.com FIRE THEFT SAFE WITH DIGITAL LOCK ELECTRONIC LOCK THEFT FIRE Cj de llves MANUAL # M08-0284-004 Overview
More informationSchematic diagram for the 8200 vector, 230 V Schematic diagram for the 8200 vector, 400/500V 1)
Generl informtion should e used to reduce the lod on the motor windings, s well s to reduce the cpcitive lekge currents to PE tht my e cused y the use of long motor cles. A motor filter is required: if
More informationService Manual. for the turbochef 3240 high h conveyor oven TurboChef Technologies, Inc.
TM Service Mnul for the turbochef 3240 high h conveyor oven 2008-2012 TurboChef Techlogies, Inc. For further informtion, cll 800.90TURBO or +1 214.379.6000 The informtion contined in this mnul is importnt
More informationFUEL SYSTEM. Table of Contents. Section 3C Oil Injection
Tle of Contents FUEL SYSTEM Section 3C Oil Injection OIL INJECTION Specil Tools................................ 3C-2 Oil System Opertion......................... 3C-2 Oil Pump Output..........................
More informationKING COBRA/KING COBRA-2 NARROW STILE SERIES KC9357/KC9357-2
KING COBRA/KING COBRA-2 NARROW STILE SERIES KC9357/KC9357-2 Keypd Progrmmble nd SNAP Comptible Trim For Rim Exit Devices Mounted On Aluminum Doors. 57047-B 04-2007 Contents of the Box KC9357/KC9357-2 INSTALLATION
More informationAssembly instructions
Assemly instructions Comi Stemer Unit Model Type of energy Unit type Trnsltion from the originl document 10013865-0AMDE-- 1/4/2017 FlexiComi MgicPilot FlexiComi Clssic 6.15 6.21 10.15 10.21 20.15 20.21
More informationSINEAX C 402 Alarm unit
for DC currents or DC voltges 00 II () G Appliction The lrm unit SINEAX C40 (Figure ) is normlly pplied to monitor the limits of oth current nd voltge mesurements. The sttus of the device is signlled remotely
More informationPOWER TRIM. Table of Contents. Section 5D - Auto Trim II
SERVICE MANUAL NUMBER 14 Tble of Contents POWER TRIM Section 5D - Auto Trim II AUTO TRIM II 1 B Auto Trim II System................. 5D-2 Description...................... 5D-2 Auto Trim II Opertion...............
More information2/2 Solenoid Operated Seat Valve, ISO Size 03
2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, electriclly operted 1 Description 2 echnicl dt
More informationELECTRICAL. Table of Contents. Specifications. Section 2B Charging & Starting System
ELECTRICAL Section 2B Chrging & Strting System Tle of Contents Specifictions........................... 2B-1 Specil Tools........................... 2B-2 Bttery Cle Size...................... 2B-3 Replcement
More informationthe machine and check the components Micro USB Cable SD Memory Card Quick Setup Guide DVD-ROM
Quick Setup Guide DSmoile 820W/DSmoile 920DW Strt Here DSmoile 820W DSmoile 920DW Thnk you for choosing Brother. Your support is importnt to us nd we vlue your usiness. Before using your mchine, red this
More informationELECTRICAL. Table of Contents. Specifications. Section 2B - Battery Charging System and Starting System. Starter Draw (Under Load)
ELECTRICAL Section 2B - Bttery Chrging System nd Strting System Tle of Contents Specifictions........................... 2B-1 Specil Tools........................... 2B-2 Bttery Chrging System Description......
More informationRPE3-06. Functional Description HA /2008. Solenoid Operated Directional Control Valves. Replaces HA /2006
Solenoid Operted Directionl Control Vlves RE3-06 10/2008 Size 06 p mx up to 320 br Q mx up to 80 L/min Replces 11/2006 4/3, 4/2 wy directionl control vlves Solenoids cn be turned round their xis to ny
More informationElectrically operated directional spool valve with a soft-shift function type WE10P NS 10. up to 35 MPa up to 120 DATA SHEET - OPERATION MANUAL
LICTION Electriclly operted directionl spool vlve with soft-shift function type WE10 NS 10 Electriclly operted directionl spool vlve type WE10 is intended for chnging the direction of fluid flow in hydrulic
More informationCONTROL VALVES FOR GRINDER. Installation, Maintenance and Operating Instructions 5 GA 71 en Issue 5/02
CONTROL VALVES FOR GRINDER Instlltion, Mintennce nd Operting Instructions 5 GA 71 en Issue 5/02 2 Tble of Contents 1 OPERATION......................... 3 1.1 Generl......................... 3 1.2 Min components.................
More informationTeile und Zubehör- Einbauanleitung
Teile und Zubehör- Einbunleitung F 46 052 EVA BMW Prts nd Accessories Instlltion Instruction Sun blind, electric BMW 3 Series Sloon (E46/4), BMW 3 Series Coupé (E46/2) Best.-Nr. 0 29 0 000 58 I/99 Printed
More informationCS 7700 FULL FUNCTION LOBBY TERMINAL REAR LOAD - 15" OR 19" DISPLAY
L0 LL -800--600 R S 00 FULL FUNTION LOBBY TERMINL RER LOD - " OR " DISPLY mm ( ") UL SFE ONSULT WITH DIEBOLD INSTLLTION/SERVIE BRNH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION
More informationPOWER TRIM. Table of Contents. Section 5D - Auto Trim II
SERVICE MANUAL NUMBER 11 Tble of Contents POWER TRIM Section 5D - Auto Trim II AUTO TRIM II Auto Trim II System................... 5D-2 Description........................ 5D-2 Auto Trim II Opertion.................
More informationCooling Efficiency 2017/2018 Cooling Equipment Rebate Application
Business Appliction Cooling Efficiency 2017/2018 Cooling Equipment Rebte Appliction For use with invoices dted on or fter Jnury 1, 2017 OID: (Internl use only) Business customer informtion Compny nme Dte
More informationCCD-493 KIT SERIES INSTRUCTION SHEET
(COMPLETE CCD-493-W KIT ILLUSTRTED. CUT-OUTS IN TRCK TO EXPOSE COMPONENTS) CCD-493 KIT SERIES INSTRUCTION SHEET CROWDERTRCK S CTCH N CLOSE TM SYSTEM PREVENTS BOUNCING ND SLMMING OF SLIDING S. CN BE INSTLLED
More informationUSER S MANUAL CONTENTS. Uninterruptible Power Supply 1. INTRODUCTION SAFTY INSTRUCTION CABLE CONNECTION... 4
USER S MANUAL ON-LINE 1K/2K/3KVA CONTENTS 1. INTRODUCTION...... 1 2. SAFTY INSTRUCTION.......... 2 3. CABLE CONNECTION.......... 4 4. SYSTEM DESCRIPTION............ 5 5. UPS OPERATION...... 12 6. TROUBLE
More informationFUEL SYSTEM. Table of Contents. Specifications. Section 3A Electric Fuel Pump FUEL SYSTEM. Fuel Recommended Gasoline Recommended Oil
FUEL SYSTEM Section 3A Electric Fuel Pump Tble of Contents Specifictions........................... 3A-1 Fuel Pump Assembly.................... 3A-2 Specil Tools........................... 3A-3 Fuel Lift
More informationREPLACEMENT. 4. REMOVE WINDSHIELD MOULDING OUTSIDE (a) Using a knife, cut off the moulding, as shown in the illustration.
7012 REPLCEMENT The instlltion procedures re the removl procedures in reverse order. However, only instlltion procedures requiring dditionl informtion re included. 1. REMOVE ROOF HEDLINING SSY (See pge
More informationJET PUMP. Table of Contents. Section 5 - Jet Pump
Tble of Contents JET PUMP Section 5 - Jet Pump JET PUMP Generl Informtion..................... 5-2 Principles of Opertion................ 5-2 Mster Specifictions Jet Pump........... 5-3 Specil Tools........................
More informationCCS-810 KIT SERIES INSTRUCTION SHEET
(COMPLETE KIT ILLUSTRTED. CUT-OUTS IN TRCK & FSCI TO EXPOSE COMPONENTS) CCS-810 KIT SERIES INSTRUCTION SHEET CROWDERTRCK S CTCH N CLOSE TM SYSTEM PREVENTS BOUNCING ND SLMMING OF SLIDING DOORS. CN BE INSTLLED
More informationFRONT SIDE FIX WINDOW
WINSHIEL/WINOWGLSS/MIRROR FRONT SIE FIX WINOW REPLEMENT FRONT SIE FIX WINOW The instlltion procedures re the removl procedures in reverse order. However, only instlltion procedures requiring dditionl informtion
More informationSTERLING POWER PRODUCTS
STERLING POWER PRODUCTS ALTERNATOR - to - BATTERY CHARGER Advnced chrging technology AB0 AB0 AB0 AB0 Pro Digitl REMOTE CTROL (OPTI) Bttery-Bttery Chrger on/off. V timer 0. A min lrm light Alrm shutdown
More informationApplication Examples of Air-piloted Valves
ir-piloted Vlves Fetures Since the unit requires ir piping only, with no need for electricl wiring, it cn e hndled y person without fer of electricl shocks or current lekge. Using no electricity mens tht
More informationScrewdrivers. Ergonomically designed handles. Greater torque. Slip-proof grip. Threecomponent. handle a. TBI Screwdrivers
Screwdrivers TBI Screwdrivers R Screwdrivers NI Screwdrivers VE Screwdrivers VE TBI Screwdrivers Bits Impct screwdrivers Other ccessories Ergonomiclly designed hndles The superior qulity of mterils used
More informationLincoln Under-cabinet Light Installation Instructions
Lincoln Under-cbinet Light Instlltion Instructions #1500178 Rev A Congrtultions on your new Lincoln Under-cbinet Light! Whether purchsed for its significnt energy svings nd efficiency, lower lifetime costs,
More informationELECTRICAL. Table of Contents. Section 2B Charging & Starting System
ELECTRICAL Section 2B Chrging & Strting System Tle of Contents Specifictions........................... 2B-2 Specil Tools........................... 2B-3 Bttery Cle Size...................... 2B-4 Replcement
More informationCS 5700 LOBBY CASH DISPENSER REAR LOAD - 15" DISPLAY OR 19" DISPLAY TYPICAL ACCESS TO LEVELING LEGS - RANGE (2) EACH SIDE OF SAFE CEN I SAFE ONLY * *
L LL -800--600 S 00 LOBBY SH DISPENSER RER LOD - " DISPLY OR " DISPLY 40mm ( 6") EN I, EN III GS or EN IV GS SFES SFE ( 6 ") ONSULT WITH DIEBOLD NIXDORF INSTLLTION/SERVIE BRNH FOR DDITIONL DETILS ND INFORMTION.
More informationCORDLESS POLE PRUNER HEAD INSTRUCTION MANUAL
WHAT S IN THE BOX Pruner Hed CORDLESS POLE PRUNER HEAD INSTRUCTION MANUAL SPECIFICATIONS Voltge: Br Length: Cutting Length Mx.: Chin Speed: Oil Tnk Cpcity: Weight: ozito.com.u 18V 200mm 170mm 3.76m/s 125ml
More informationPrecision Pressure Transmitter with Switching Contacts and Display. Interface Setup program. Display 4 characters. Switching output 1.
Dt sheet 405054 Pge 1/7 JUMO DLOS HP Precision Pressure Trnsmitter with Switching Contcts nd Disply Appliction Hydrulic plnts Mchine nd plnt engineering Test benches Lbortory equipment Brief description
More informationFUEL SYSTEM. Table of Contents. Section 3B - Carburetors
Tle of Contents FUEL SYSTEM Section 3B - Cruretors CARBURETORS Fuel System - Trouleshooting.............. 3B-2 Generl Informtion.................... 3B-2 Attenutor And Cr Throttle Levers......... 3B-4
More informationSOLENOID VALVES / DIRECTIONAL CONTROL VALVES
OM SOLENOID VLVE HD1N SIZE 025 Fetures HD1 N Series (for 7 M) 1. ompct 2. Dust- nd wter-proof of highest level (I67), thnks to use of M12-4 pin connector 3. Since it opertes t low currency, it cn e connected
More informationTECHNICAL INSIGHT INTERNAL CLEARANCE - TYPES AND NORMS
TECHNICAL INSIGHT PRODUCT AND APPLICATION ENGINEERING INFORMATION A PUBLICATION OF NSK AMERICAS INTERNAL CLEARANCE - TYPES AND NORMS Internl clernce is the distnce which the two rings of non-instlled bering
More informationMPC COBRA SERIES. Manually Programmable Cylindrical Lock D
51120-D MPC COBRA SERIES Mnully Progrmmle Cylindricl Lock 575 Birch Street Forestville, CT 06010 technicl support: 866-322-1237 fx: 866-322-1233 http://www.irsupport.net 57010-H 12-19-2005 Introduction
More informationExcalibur EX-21 & EX-30 Fretsaws. User Manual. Axminster Reference No: (EX-21) (EX-30)
Excliur EX-21 & EX-30 Fretsws 950007 (EX-30) 950006 (EX-21) Axminster Reference No: 950006 (EX-21) 950007 (EX-30) User Mnul 950006-950007 www.xminster.co.uk Index of Contents... Pge No. Index of Contents...02
More informationtel. +44 (0) 28 37 518111 fx +44 (0) 28 37 528181 e.mil sles@technidrive.co.uk points for considertion when shft mounting direct drive ger units. modern hollow bore output hub ger units lend themselves
More informationWATERTIGHT AIRTIGHT SPECIAL ACCESS DOORS & HATCHES, PART 1 GENERAL
SECTION 08316 WTERTIGHT IRTIGHT SPECIL CCESS DOORS & HTCHES, PRT 1 GENERL HIGHLIGHTED RES TO BE INSERTED BY SPECIFYING ENGINEER. 1.1 WORK OF THIS SECTION. THE WORK OF THIS SECTION INCLUDES PROVIDING LL
More informationFUEL SYSTEM. Table of Contents. Section 3B - Carburetors. Attenuator And Carb Throttle Levers... 3B-2 Fuel Lines... 3B-4
Tle of Contents FUEL SYSTEM Section 3B - Cruretors CARBURETORS Attenutor And Cr Throttle Levers....... 3B-2 Fuel Lines.............................. 3B-4 Cruretor............................. 3B-6 Fuel
More informationAssembly Instructions Montageanleitung Instructions de montage. Arcadia D x 363W x 242H cm / 16 5"D x 11 10¾"W x 7 11¼"H
Assemly Instructions Montgenleitung Instructions de montge Arcdi 5000 501D x 363W x 242H cm / 16 5"D x 11 10¾"W x 7 11¼"H EN IMPORTANT Plese red these instructions crefully efore you strt to ssemle this
More informationWINDSHIELD / WINDOWGLASS
WINSHIEL / WINOWGLSS QURTER WINOW GLSS QURTER WINOW GLSS OY WINSHIEL / WINOWGLSS OMPONENTS 97 RER SIE SETK FRME LH RER SIE SETK FRME RH RER SET USHION SSEMLY RER OOR OPENING TRIM WETHERSTRIP LH TONNEU
More informationSolatube SolaMaster Series
Soltue SolMster Series Soltue 330 DS 0-10V Low Voltge Dylight Dimmer Soltue 750 DS 0-10V Low Voltge Dylight Dimmer Instlltion Instructions Prts List Quntity 1 0-10V Dylight Dimmer (1) 1 2 Dylight Dimmer
More informationFUEL SYSTEM. Section 3A Pulse Crankcase Driven Fuel Pump. Model 200/225 DFI. 1. Fuel Pressure/Vacuum Gauge (0-15 psi) (Obtain Locally)
FUEL SYSTEM Section 3A Pulse Crnkcse Driven Fuel Pump Tle of Contents Specifictions................................ 3A-1 Specil Tools................................ 3A-1 Fuel Pump..................................
More informationPress control block PSB Type approved according to DIN EN 693
Press control lock PS Type pproved ccording to DIN EN 693 Description The press control locks PS in the nominl sizes 06 nd 0 re modulr control locks with EC type pprovl for use in hydrulic presses ccording
More informationJUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits
Mckenrodtstrße 4 609 Fuld, Allemgne 605 Fuld, Allemgne Tél. : +49 66 600-0 Fx. : +49 66 600-607 B.P. 4500 57075 Metz Cedex, Frnce Tél. : + 87 7 5 00 Fx. : + 87 7 89 00 Industriestrße 8 4700 Eupen, Belgique
More informationE16DU, E45DU, E80DU, E140DU electronic overload relays 0.10 to 140 A
E1DU, E45DU, E80DU, E140DU electronic overlod relys 0.10 to 140 A Description 2CDC231001F0007 The E1DU up to E140DU re selfsupplied electronic overlod relys, which mens no extr externl supply is needed.
More informationquick reference manual
quick reference mnul For the leo modules with stndrd frmes 50mm S18 S19 S25 S59 S75 S79 with stndrd frme 35mm P18 P19 with frmes for roof integrtion S18 sol S19 sol S79 sol Plese red this crefully prior
More informationELECTRICAL AND IGNITION 2 A IGNITION SYSTEM
ELECTRICAL AND IGNITION 2 A IGNITION SYSTEM 54637 Tle of Contents Pge Ignition System.......................... 2A-1 Description........................... 2A-1 Ignition Trouleshooting...................
More informationOwner s Manual For Model 548 Floor Crane ORIGINAL TEXT
Red this Owner s Mnul thoroughly efore operting the equipment. Keep it with the equipment t ll times. Replcements re ville from Thern, Inc., PO Box 347, Winon, MN 55987, 507-454-2996. www.thern.com IMPORTANT:
More informationUSER S MANUAL CONTENTS. Uninterruptible Power Supply 1. INTRODUCTION SAFTY INSTRUCTION SYSTEM DESCRIPTION... 4
USER S MANUAL PowerWalker VFI 1000 / 3000VA CONTENTS 1. INTRODUCTION...... 1 2. SAFTY INSTRUCTION......... 2 3. SYSTEM DESCRIPTION......... 4 4. CABLE CONNECTION......... 7 5. OPERATION...... 8 6. TROUBLE
More informationX3-40/X3-45/X3-55/X Mercury Marine. Operation Maintenance Installation Warranty Manual
X3-40/X3-45/X3-55/X3-70 2017 Mercury Mrine Opertion Mintennce Instlltion Wrrnty Mnul EU Complince Sttement Attwood Corportion hereby declres tht the MotorGuide X3 trolling motor is in complince with the
More informationAmeriGlide Powered Stair Climber OWNER S MANUAL
AmeriGlide Powered Stir Climer OWNER S MANUAL (To Be Retined y Owner) 2 IMPORTANT Ensure tht only n uthorized AmeriGlide Deler services the AmeriGlide Powered Stir Climer. Under no circumstnces is nyone
More informationTechnical Publications Z Service Manual. First Edition Part No
Technicl Publictions Z-45 22 Service Mnul First Edition Prt No. 29487 Introduction Service Mnul - First Edition Importnt Red, understnd nd obey the sfety rules nd operting instructions in the Genie Z-45/22
More informationElectrically controlled directional control poppet valve type UREZ6
LICION Electriclly controlled directionl control poppet vlve type UREZ6 is intended for chnging the direction of hydrulic fluid flow in system, which llows for chnge of the direction of the receiver motion
More informationNord berg Anchor Applicator D
Nord berg Anchor Applictor D NORDSERC Equipment 2 This mnul is guide for the opertion nd routine mintennce of NORDCO Rilrod Mintennce Mchine. It covers product technicl informtion, bsic operting nd mintennce
More information2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03
2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) idirectionl lek-proof shutoff, direct cting, electriclly operted Series W2N, W2 1 Description With crtridge
More information