Push-in RTD temperature probe for heat meters with connecting cable for thermowells (type PS/PL)
|
|
- Cody Tyler
- 5 years ago
- Views:
Transcription
1 elivery ddress: Mckenrodtstrße Fuld, Germny Postl ddress: Fuld, Germny Fx: Emil: Temple Bnk, Riverwy Hrlow, Essex, CM20 2Y, UK Fx: Emil: 6733 Myers Rod Est Syrcuse, NY 13057, USA Fx: Emil: Internet: t Sheet Pge 1/7 Push-in RT temperture probe for het meters with connecting cble for thermowells (type PS/PL) For tempertures between 0 nd 180 C Type exmintion certificte for MI het meters nd domestic pprovl for cold meters s replceble temperture probes Fulfills the requirements of IN EN 1434, AGFW FW202, nd FW211 Piring nd declrtion of conformity in ccordnce with Germn Weights nd Mesures Act nd MI Production certified ccording to module (MI) (CE nd metrology identifiction mrking) Adpted ccessories for instlltion (dt nd price sheets nd ) Het meter RT temperture probes re used for temperture mesurement in closed pipeline systems. As the probes re instlled in thermowells, emptying the system for regulr replcement t the end of the certifiction period is no longer necessry. The temperture probes re pproved ccording to the EU directive 2014/32/EU (MI) s well s ccording to the Germn Weights nd Mesures Act (Mess- und Eichgesetz or MessEG). The temperture probes re vilble in the pired version nd version with declrtion of conformity. The officilly recognized test fcility for het KHE2 is vilble for this purpose. Production hs been certified in ccordnce with Annex of irective 2014/32/EU nd Annex 4 Module of the Weights nd Mesures Act. Note: We recommend the following instlltion in ccordnce with technicl directive TR-K9 (current stte of the rt): For het/cold meters with nominl flow qp 6 m 3 /h, temperture probes must lwys be instlled with direct immersion when instlling new section of pipeline in mesuring point re with nominl pressure 16 br. Temperture probes with thermowells cn lso be instlled under these circumstnces but only when under incresed strin (for exmple, pressure, temperture, flow velocity, or oscilltion). Technicl dt Process connection Connection Connecting cble Protection tube Push-in RT temperture probes for thermowells Ferrules PVC, PUR, TPE, silicone; unshielded or shielded Type PS: stinless steel Ø 5.0 mm, Ø 5.2 mm, or Ø 6 mm Type PL: stinless steel Ø 6 mm Protection tube with fitting tolernce for thermowells Mesuring insert Pltinum temperture sensor ccording to IN EN Nominl vlue: Pt100, Pt500, or Pt1000 Connection: two-wire or four-wire circuit Temperture Type PS: 0 to 150 C Type PL: 0 to 180 C Temperture difference Minimum immersion depth Insertion length Response Type PS: 3 to 150 K Type PL: 3 to 180 K Type PS: > 15 mm Type PL: 30 mm Type PS: 45 to 85 mm Type PL: 85 to 450 mm Type PS: t 0.5 = 15 s (instlled in thermowell) Type PL: t 0.5 = 12 s (instlled in thermowell) Environmentl influences Climtic 0to55 C Protection type IP65 Mechnicl M3 Accessories Thermowells, see dt nd price sheet Accessories, see dt nd price sheet
2 elivery ddress: Mckenrodtstrße Fuld, Germny Postl ddress: Fuld, Germny Fx: Emil: Temple Bnk, Riverwy Hrlow, Essex, CM20 2Y, UK Fx: Emil: 6733 Myers Rod Est Syrcuse, NY 13057, USA Fx: Emil: Internet: t Sheet Pge 2/7 Connecting cble lengths ccording to IN EN 1434 Conductor cross section Mx. connecting cble length for Pt100 Mx. connecting cble length for Pt mm mm mm mm 0.34 mm mm mm mm 0.50 mm mm mm mm Mx. connecting cble length for Pt1000 Importnt informtion: The possible limittion of the connecting cble length due to the type exmintion certificte of the U/meter should lso be tken into ccount. For four-wire circuits, the mx. connecting cble lengths re limited by the requirements of the U/meter. Overview of pprovls Version Bsic type Type exmintion certificte Type Number /50 (PS) Module B ccording to MI (het) A (150 C) /50 (PS) Weights nd Mesures Act (Germny, E-15-M-PTB-0052 (150 C) cold) PS = Pocket Short (short temperture probe, with thermowell) /30 (PL) Module B ccording to MI (het) E-06-MI004-PTB011 (180 C) /30 (PL) Weights nd Mesures Act (Germny, E-15-M-PTB-0050 (150 C) cold) PL = Pocket Long (long temperture probe, with thermowell) MI = Mesuring Instruments irective, 2014/32/EU
3 elivery ddress: Mckenrodtstrße Fuld, Germny Postl ddress: Fuld, Germny Fx: Emil: Temple Bnk, Riverwy Hrlow, Essex, CM20 2Y, UK Fx: Emil: 6733 Myers Rod Est Syrcuse, NY 13057, USA Fx: Emil: Internet: t Sheet Pge 3/7 imensions Bsic type /50 (PS) Bsic type /50 (PS) Bsic type /30 (PL) Bsic type /30 (PL)
4 elivery ddress: Mckenrodtstrße Fuld, Germny Postl ddress: Fuld, Germny Fx: Emil: Temple Bnk, Riverwy Hrlow, Essex, CM20 2Y, UK Fx: Emil: 6733 Myers Rod Est Syrcuse, NY 13057, USA Fx: Emil: Internet: t Sheet Pge 4/7 Order detils: Het meter RT temperture probe with connecting cble (1) Bsic type /50 Push-in RT temperture probe for instlltion in thermowell (PS), protection tube mde from stinless steel (2) Operting temperture in C x to 105 C/PVC 105, PUR (only in two-wire circuit) (3) Mesuring insert (4) Tolernce clss ccording to IN EN x 1 Clss B (stndrd) x 2 Clss A x 3 Clss AA (5) Protection tube dimeter in mm x 5 Ø 5 mm x 5.2 Ø 5.2 mm (6) Insertion length in mm (45 to 85 mm) x mm (only for Ø 5 mm nd Ø 5.2 mm) x mm (only for Ø 6 mm) x mm (only for Ø 6 mm) x... Specifictions in plin text (7) Connecting cble end x 04 Tin-plted connection strnds (only for temperture probes permnently connected to the U) x 11 Ferrules ccording to IN Prt 4 (stndrd) (8) Connecting cble length in mm (> 500 mm) x mm (stndrd) x... Specifictions in plin text (increments of 500 mm, mx. connecting cble length: see tble) (9) Extr codes x 317 Shielded connecting cble x 340 Pired ccording to IN EN 1434 x 761 Pired ccording to IN EN 1434 with declrtion of conformity/identifiction mrking ccording to MI (het) Price for piring depends on number of units; cost effective from 30 pirs of temperture probes Order code /,... Order exmple / / 761 List extr codes in sequence nd seprte using comms. Importnt informtion: Thermowells, see dt nd price sheet Accessories, see dt nd price sheet
5 elivery ddress: Mckenrodtstrße Fuld, Germny Postl ddress: Fuld, Germny Fx: Emil: Temple Bnk, Riverwy Hrlow, Essex, CM20 2Y, UK Fx: Emil: 6733 Myers Rod Est Syrcuse, NY 13057, USA Fx: Emil: Internet: t Sheet Pge 5/7 Order detils: Het meter RT temperture probe with connecting cble (1) Bsic type /30 Push-in RT temperture probe for instlltion in thermowell (PL), protection tube mde from stinless steel (2) Operting temperture in C x to 105 C/PVC 105, PUR (only in two-wire circuit) x to 180 C/silicone (3) Mesuring insert (4) Tolernce clss ccording to IN EN x 1 Clss B (stndrd) x 2 Clss A x 3 Clss AA (5) Protection tube dimeter in mm (6) Insertion length in mm (105 to 450 mm) x mm x mm x mm x... Specifictions in plin text (7) Connecting cble end x 04 Tin-plted connection strnds (only for temperture probes permnently connected to the U) x 11 Ferrules ccording to IN Prt 4 (stndrd) (8) Connecting cble length in mm (> 500 mm) x mm (stndrd) x... Specifictions in plin text (increments of 500 mm, mx. connecting cble length: see tble) (9) Extr codes x 317 Shielded connecting cble x 340 Pired ccording to IN EN 1434 x 761 Pired ccording to IN EN 1434 with declrtion of conformity/identifiction mrking ccording to MI (het) Price for piring depends on number of units; cost effective from 30 pirs of temperture probes Order code /,... Order exmple / / 761 List extr codes in sequence nd seprte using comms. Importnt informtion: Thermowells, see dt nd price sheet Accessories, see dt nd price sheet
6 elivery ddress: Mckenrodtstrße Fuld, Germny Postl ddress: Fuld, Germny Fx: Emil: Temple Bnk, Riverwy Hrlow, Essex, CM20 2Y, UK Fx: Emil: 6733 Myers Rod Est Syrcuse, NY 13057, USA Fx: Emil: Internet: t Sheet Pge 6/7 Order detils: Combined cold-het meter RT temperture probe with connecting cble (1) Bsic type /50 Push-in RT temperture probe for instlltion in thermowell (PS), protection tube mde from stinless steel (2) Operting temperture in C x to 105 C/PVC 105, PUR (only in two-wire circuit) (3) Mesuring insert (4) Tolernce clss ccording to IN EN x 1 Clss B (stndrd) x 2 Clss A x 3 Clss AA (5) Protection tube dimeter in mm x 5 Ø 5 mm x 5.2 Ø 5.2 mm (6) Insertion length in mm (45 to 85 mm) x mm (only for Ø 5 mm nd Ø 5.2 mm) x mm (only for Ø 6 mm) x mm (only for Ø 6 mm) x... Specifictions in plin text (7) Connecting cble end x 04 Tin-plted connection strnds (only for temperture probes permnently connected to the U) x 11 Ferrules ccording to IN Prt 4 (stndrd) (8) Connecting cble length in mm (> 500 mm) x mm (stndrd) x... Specifictions in plin text (increments of 500 mm, mx. connecting cble length: see tble) (9) Extr codes x 317 Shielded connecting cble x 340 Pired ccording to IN EN 1434 x 341 Pired ccording to IN EN 1434 with declrtion of conformity/identifiction mrking ccording to MessEG (cold, Germny) x 761 Pired ccording to IN EN 1434 with declrtion of conformity/identifiction mrking ccording to MI (het) Price for piring depends on number of units; cost effective from 30 pirs of temperture probes Order code /,... Order exmple / / 761 List extr codes in sequence nd seprte using comms. Importnt informtion: Thermowells, see dt nd price sheet Accessories, see dt nd price sheet
7 elivery ddress: Mckenrodtstrße Fuld, Germny Postl ddress: Fuld, Germny Fx: Emil: Temple Bnk, Riverwy Hrlow, Essex, CM20 2Y, UK Fx: Emil: 6733 Myers Rod Est Syrcuse, NY 13057, USA Fx: Emil: Internet: t Sheet Pge 7/7 Order detils: Combined cold-het meter RT temperture probe with connecting cble (1) Bsic type /30 Push-in RT temperture probe for instlltion in thermowell (PL), protection tube mde from stinless steel (2) Operting temperture in C (3) Mesuring insert (4) Tolernce clss ccording to IN EN x 1 Clss B (stndrd) x 2 Clss A x 3 Clss AA (5) Protection tube dimeter in mm (6) Insertion length in mm (105 to 450 mm) x mm x mm x mm x... Specifictions in plin text (7) Connecting cble end x 04 Tin-plted connection strnds (only for temperture probes permnently connected to the U) x 11 Ferrules ccording to IN Prt 4 (stndrd) (8) Connecting cble length in mm (> 500 mm) x mm (stndrd) x... Specifictions in plin text (increments of 500 mm, mx. connecting cble length: see tble) (9) Extr codes x 317 Shielded connecting cble x 340 Pired ccording to IN EN 1434 x 341 Pired ccording to IN EN 1434 with declrtion of conformity/identifiction mrking ccording to MessEG (cold, Germny) x 761 Pired ccording to IN EN 1434 with declrtion of conformity/identifiction mrking ccording to MI (het) Price for piring depends on number of units; cost effective from 30 pirs of temperture probes Order code /,... Order exmple / / List extr codes in sequence nd seprte using comms. Importnt informtion: Thermowells, see dt nd price sheet Accessories, see dt nd price sheet
Hot Air Thermostats. WTHc series. Special features. Brief description. Switching function. Approval/approval marks (see "Technical data")
Delivery ddress: Mckenrodtstrße 36039 Fuld, Germny Postl ddress: 36035 Fuld, Germny Phone: +9 66 6003-0 Fx: +9 66 6003-607 E-mil: mil@jumo.net Temple Bnk, Riverwy Hrlow, Essex CM0 DY, UK Phone: + 79 635533
More informationJUMO MIDAS S05 OEM pressure transmitter - universal
Delivery ddress: Mckenrodtstrße 4 609 Fuld, Germny Postl ddress: 605 Fuld, Germny Phone: +49 66 600-0 Fx: +49 66 600-607 Hrlow, Essex CM0 DY, UK Phone: +44 79 655 Fx: +44 79 656 Cnstot, NY 0, USA Phone:
More informationJUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits
Mckenrodtstrße 4 609 Fuld, Allemgne 605 Fuld, Allemgne Tél. : +49 66 600-0 Fx. : +49 66 600-607 B.P. 4500 57075 Metz Cedex, Frnce Tél. : + 87 7 5 00 Fx. : + 87 7 89 00 Industriestrße 8 4700 Eupen, Belgique
More informationP3IC / P3ICP. Datenblatt. Absolute pressure transducer. Industrial Class. Special features. Dimensions (in mm) B en 1
P3IC / P3ICP Absolute pressure trnsducer Industril Clss Dtenbltt Specil fetures - For sttic nd dynmic pressure vrince, pressure peks nd pressure oscilltions - Nominl (rted) pressure 10 br to 3000 br -
More informationP3IC / P3ICP. Datenblatt. Absolute pressure transducer. Industrial Class" Special features. Dimensions (in mm) B en
P3IC / P3ICP Absolute pressure trnsducer Industril Clss" Dtenbltt Specil fetures For sttic nd dynmic pressure vrince, pressure peks nd pressure oscilltions Nominl (rted) pressure 10 br to 3000 br Strin
More informationJUMO MIDAS C18 SW. OEM seawater pressure transmitter. Applications. Brief description. Customer benefits. Special features. Approvals/approval marks
Pge /8 JUMO MIDAS C8 SW OEM sewter pressure trnsmitter Applictions wter tretment reverse osmosis, e.g. sewter deslintion plnts purifiction plnts orgnic cids, e.g. cetic cid solutions contining chloride,
More informationSeries 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve
Series 250 Type 3251-1 nd Type 3251-7 Pneumtic Control Vlves Type 3251 Globe Vlve DIN version Appliction Control vlve for process engineering pplictions with high industril requirements Nominl size DN
More information4/2- and 4/3-directional spool valve solenoid-operated, direct-acting 4WE 6
4/2- nd 4/3-directionl spool vlve solenoid-operted, direct-cting 4WE 6 DESCRIION HYDC 4/2- nd 4/3- directionl spool vlves of the 4WE 6 series re directionl vlves for oil hydrulic systems which re used
More informationPneumatic Actuators 1000, 1400, 2800, and 2 x 2800 cm² Type 3271 and Type 3277 for integral positioner attachment Hand-operated Actuator Type 3273
Pneumtic Actutors 000, 400, 2800, nd 2 x 2800 cm² Type 27 nd Type 277 for integrl positioner ttchment nd-operted Actutor Type 27 Appliction Liner ctutor in prticulr for ttchment to Series 240, 250, nd
More informationBIMETAL-POINTER-THERMOMETER
BIMETA-POINTER-THERMOMETER Chemicl version cc. EN 30 byonet cse IP 6 With or without filling Suitble for chemicl nd petrochemicl industry, food, pulp nd pper industry nd for mchine nd pprtus contruction.
More informationFINGER STRIPS. and other EMI shielding products. Characteristics
BERYLLIUM COPPER CONTCT FINGER STRIPS nd other EMI shielding products ppliction Due to their outstnding mteril nd electricl chrcteristics, eryllium copper fingers of different shpes nd dimensions re used
More informationPress control block PSB Type approved according to DIN EN 693
Press control lock PS Type pproved ccording to DIN EN 693 Description The press control locks PS in the nominl sizes 06 nd 0 re modulr control locks with EC type pprovl for use in hydrulic presses ccording
More informationSpecial Valves. Connection size G1/8 to G2. Contents Version Actuation Port size Page Characteristics. Instructions Overview. Electrical G1/8 G1/4
Contents Version Actution Port size Pge Chrcteristics Dimensions 3/2, 5/2 nd 5/3 Wy Vlves with NAMURconnections Series S9 5/2 Wy Vlves for Two Hnd Opertion Series S9 Time Dely Vlve for 2-Hnd Sfety Strt
More information631 ALLOWANES AND TOLERANCES
631 ALLOWANES AND TOLERANCES ANSI Fits. Tbles 3 through 9 inclusive show series of stndrd types nd clsses of fits on unilterl hole bsis, such tht the fit produced by mting prts in ny one clss will produce
More information4/2- and 4/3-way shut-off valve
Courtesy of CMA/Flodyne/Hydrdyne Motion Control Hydrulic Pneumtic Electricl Mechnicl (00) 426-540 www.cmfh.com 4/2- nd 4/3-wy shut-off vlve Type Z4WE Size 6 Component series 3X Mximum operting pressure
More informationJUMO dtrans T06 Multifunctional Four-Wire Transmitter in Mounting Rail Case in Accordance with DIN EN and EN ISO 13849
Dt sheet 777 Pge / JUMO dtrans T6 Multifunctionl Four-Wire Trnsmitter in Mounting Ril Cse in Accordnce with DIN EN 658 nd EN ISO 3849 Brief description The trnsmitter cquires the temperture through n RTD
More information2/2 Solenoid Operated Seat Valve, ISO Size 03
2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 20 l/min (5.3 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, with EX-sfty sol. coil Vlve: With crtridge vlve,
More informationSINEAX C 402 Alarm unit
for DC currents or DC voltges 00 II () G Appliction The lrm unit SINEAX C40 (Figure ) is normlly pplied to monitor the limits of oth current nd voltge mesurements. The sttus of the device is signlled remotely
More informationThermocouple Thermometer omnigrad S- TC 88
Technicl informtion TI 279T/02/en 60022508 Thermocouple Thermometer omnigrd S- TC 88 Thermocouple ssembly with extension neck Replceble insert PCP (4...20 ma), HART or PROFIBUS-PA electronics The TC 88
More informationRTD Temperature Sensor omnigrad S- TR 88
Technicl informtion TI 271T/02/en 60021058 RTD Temperture Sensor omnigrd S- TR 88 RTD ssembly with extension neck Replceble insert PCP (4...20 ma), HART or PROFIBUS-PA electronics The TR 88 Omnigrd S rnge
More informationCable Trolleys for C-Rails Program
Cble Trolleys for C-Rils Progrm 02 0 0260 Contents C-Ril nd Accessories Progrm 02 C-Ril x... 2 Trck Coupler... 2 End Stop... 2 Trck Support Brcket... 2 Support Arm nd Girder Clip... 3 Brcket... 3 Cble
More informationRTD Temperature Sensor omnigrad T -TR 24
Technicl Informtion TI 269T/02/en 60020989 RTD Temperture Sensor omnigrd T -TR 24 Sliding threded or weld-in process connection With replceble insert PCP (4...20 ma), HART or PROFIBUS-PA electronics Temperture
More information11 263/ Radial Piston Pump Model R4 /Series 2X Fixed Displacement. Ordering Code 1 PF 1 R4 2X R Replaces:
ize.60 to 0.00 Rdil iston ump Model R4 /eries X Fixed Displcement 0,0 I (00 br).9 in /rev (9.4 cm /rev) RA 6/0.9 RA 6/0.9 Replces: 06.89 K 6/ Rdil piston pump with 0 pistons nd prllel shft Chrcteristics:
More information4/3, 4/2 and 3/2 directional valve with wet-pin DC solenoids
1/12 4/3, 4/2 nd 3/2 directionl vlve with wet-pin DC solenoids RE 23178-XN-B2/04.10 Replces: 05.04 Type WE 6../.E..XN Size 6 Component series 6X Mximum operting pressure 350 r Mximum flow 80 l/min HAD7194
More information(mω) 1. Temperature ( C) Voltage (V) ULRG1 /
Resistors Metl Strip Current Sense Resistors Surfce Mount Metl Element Current Metl Element Sense Resistor UR Series UR Current Series Sense Resistor Mke Possible Resistnce R0005 (m ) to R015 (15m ) Metl
More informationData Sheet T /4/5/6 EN
Dt heet T 8310-1/4/5/6 EN Pneumtic Actutors up to 750v2 cm² Type 3271 Type 3277 for integrl positioner ttchment Appliction Liner ctutors prticulrly suitble for ttchment to eries 240, 250, 280 nd 290 Vlves
More informationAIRCRAFT ENGINES SERVICE INSTRUCTION ENGINE START AT LOW TEMPERATURES AT ROTAX SI R1
d03161 RECOMMENDED AIRCRAFT ENGINES SERVICE INSTRUCTION ENGINE START AT LOW TEMPERATURES AT ROTAX ENGINE TYPE 912 AND 914 (SERIES) Repeting symbols: Plese, py ttention to the following symbols throughout
More informationDPST-NO None 2 channels Auto-reset Inverse 24 VAC/VDC G9SB-2002-A 4 1 channel or 2
Sfety Rely Unit Ultr Slim Sfety Rely Unit Models of width 17.5 mm vilble with 2 or 3 poles. Models of width 22.5 mm with 3 poles lso vilble. Conforms to EN stndrds. (TÜV pprovl) DIN trck mounting possible.
More informationPrecision Pressure Transmitter with Switching Contacts and Display. Interface Setup program. Display 4 characters. Switching output 1.
Dt sheet 405054 Pge 1/7 JUMO DLOS HP Precision Pressure Trnsmitter with Switching Contcts nd Disply Appliction Hydrulic plnts Mchine nd plnt engineering Test benches Lbortory equipment Brief description
More informationJUMO dtrans T06 Multifunctional Four-Wire Transmitter in Mounting Rail Case in Accordance with DIN EN and EN ISO 13849
Dt sheet 777 Pge / JUMO dtrans T6 Multifunctionl Four-Wire Trnsmitter in Mounting Ril Cse in Accordnce with DIN EN 658 nd EN ISO 3849 Brief description The trnsmitter cquires the temperture through n RTD
More informationRPEA3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated with 8W Coil. Replaces HA /2007
Directionl Control Vlves Solenoid Operted with 8W Coil RPEA3-06 0/20 Size 06 (D 03) 350 br (5076 PSI) 80 L/min (2 GPM) Replces 2/2007 /3-, /2- wy directionl control vlves Enclosure type to IP65 Push button
More informationAccessories. Inlet nozzles 550. Guard grilles 553. Lead connections, capacitors 558. Terminal boxes, air filters 562
Accessories Generl informtion Inlet nozzles 550 Gurd grilles 553 Led connections, cpcitors 558 Terminl boxes, ir filters 562 Speed setting, motor protection switch, third-prty ccessories 564 Technology
More information2/2 Solenoid Operated Seat Valve, ISO Size 03
2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, electriclly operted 1 Description 2 echnicl dt
More informationInstallation and Operational Instructions for ROBA -slip hubs Sizes 0 12 (B.1.0.GB)
Plese red these Opertionl Instructions crefully nd follow them ccordingly! Ignoring these Instructions my led to mlfunctions or to clutch filure, resulting in dmge to other prts. These Instlltion nd Opertionl
More information2 Way Slip-In Cartridge Valves Series CE, CP, C
tlogue H-3500/UK hrcteristics Wy Slip-In rtridge lves Series E,, wy slip-in crtridge vlves re hydruliclly controlled set vlves tht re designed for compct block instlltion. Slip-in crtridge, cover, nd pilot
More informationALLROUNDER 1200 T. Table diameter: 1200 mm Clamping force: 800, 1000, 1600, 2000 kn Injection unit (acc. to EUROMAP): 70, 100, 170, 290, 400, 800
Fcts nd figures ALLROUNDER 12 T Tble dimeter: 12 mm Clmping force: 8, 1, 16, 2 kn (cc. to EUROMAP): 7, 1, 17, 29, 4, 8 www.rburg.com 12 T Mchine dimensions up to 1 kn 385 1) 323 2) 3545 3) 366 4) 391 5)
More informationPERSEUS ULTRA LOW PRESSURE
PERSEUS ULTRA LOW PRESSURE PF60 ATEX & IECEx Exd, Exi & INDUSTRIAL ULTRA LOW PRESSURE SWITCH This rnge of switches fetures robust high qulity housing with 1 or 2 seled SPDT microswitches nd hs been designed
More informationFire dampers. The art of handling air. Type FKA-EU tested to EN FKA-EU/DE/BE/en. according to Declaration of Performance
FKA-EU/DE/BE/en Fire dmpers Type FKA-EU tested to EN 1366-2 ccording to Declrtion of Performnce DoP / FKA-EU / DE / 2013 / 001 The rt of hndling ir Contents Description Description 2 Correct use 3 Construction
More informationVB-7000 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents
V-7000 Series Selection Guide T V-7000 Series 1/2 to 2 Globe Vlves with Fort M400, M800, nd M1500 ctutors pplictions T Fort M400, M800, nd M1500 series liner ctutors mount directly 1 onto 1/2 to 2 V-7xxx
More informationMANN+HUMMEL Oil-bath air cleaner Single-stage air cleaner without spare parts
MANN+HUMMEL Oil-th ir clener Single-stge ir clener without spre prts 57 Oil-th ir clener: Servicing without spre prts The proven oil-th ir cleners from MANN+HUMMEL re suitle for light to medium dust conditions
More informationBrazed heat exchanger XB
Description The XB is rnge of copper rzed plte het exchngers for use in District Heting (DH) nd District Cooling (DC) pplictions, e.g. domestic hot wter production, district heting susttion to seprte the
More information3/3, 4/2 and 4/3 directional poppet valve with solenoid actuation
3/3, 4/2 nd 4/3 directionl poppet vlve with solenoid ctution RE 22035/06.10 Replces: 12.08 1/16 Type SEC Size 6 Component series 1X Mximum operting pressure 420 r [6100 psi] Mximum flow 25 l/min [6.6 US
More informationGUARDIAN VERTICAL MOUNTING
GUARDIAN VERTICAL MOUNTING L120 GUARDIAN INDUSTRIAL & ATEX Exi VERTICAL REED LEVEL SWITCH This rnge of mgnet operted reed switches re equipped with hermeticlly seled reed contcts. The flot is fitted with
More informationElectrically operated directional spool valve with a soft-shift function type WE10P NS 10. up to 35 MPa up to 120 DATA SHEET - OPERATION MANUAL
LICTION Electriclly operted directionl spool vlve with soft-shift function type WE10 NS 10 Electriclly operted directionl spool vlve type WE10 is intended for chnging the direction of fluid flow in hydrulic
More information2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03
2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 20 l/min, p mx = 315 r idirectionl set-vlve shut-off, direct cting, electriclly operted 1 Description he W2N / W2 series of 2/2 4/4 solenoid operted
More informationUltrasonic Flow Meter
Ultrsonic Flow Meter mesuring monitoring nlysing Mesuring rnge: up to 20 m/s Accurcy: ±0.5% of m. v. pmx PN 100, tmx 180 C Flnge DN 25...1000, DIN /ANI teel or stinless steel 1.4404 Anlogue, frequency,
More informationHand-operated Actuator Type 3273
Hnd-operted Actutor Type 3273 Appliction Hnd-operted ctutor for ttchment to vlves, especilly for Series 240, 250 nd 260 Control Vlves. Rted trvels of 5 nd 30 mm. Nominl thrusts up to 32 kn The Type 3273
More informationWorld s Leading Supplier of Fastener Inspection Equipment
World s Leding Supplier of Fstener Inspection Equipment clibrtion Price list Qulity Service for your Qulity Deprtment Plese include the following with your clibrtion order: 1 PO Number 1 Clibrtion Cycle
More informationSchematic diagram for the 8200 vector, 230 V Schematic diagram for the 8200 vector, 400/500V 1)
Generl informtion should e used to reduce the lod on the motor windings, s well s to reduce the cpcitive lekge currents to PE tht my e cused y the use of long motor cles. A motor filter is required: if
More informationDIEBOLD 5550 CASH DISPENSER THROUGH 330mm (13") MAXIMUM WALL PLAN VIEW FRONT ELEVATION SIDE ELEVATION CONSUMER ACCESS DIMENSIONS
L0 CLL -800--600 R DIEBOLD 0 CSH DISPENSER THROUGH 0mm (") MXIMUM WLL mm ( " ) UL CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE
More information2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03
2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) idirectionl lek-proof shutoff, direct cting, electriclly operted Series W2N, W2 1 Description With crtridge
More informationVARIFLUX IFS 6000 Electromagnetic Flowmeter
KROHNE 04/2001 D 31 VR60 02 E GR/PRINTO IFS 6000 Electromgnetic Flowmeter for snitry nd septic pplictions For mny different ppliction fields with mny different types of process connections For mesurement
More informationSMP-BC Mixproof Valve
. kythe Proven Mixproof Rnge SMP-BC Mixproof Vlve Concept SMP-BC is snitry pneumtic set vlve, designed for sfety nd lek detection when two different products flow through only one vlve. The vlve is often
More informationTITAN DIFFERENTIAL PRESSURE DPF266 ATEX/IECEx Exd, Exia & INDUSTRIAL DIFFERENTIAL PRESSURE, SWITCH
TITAN DIFFERENTIAL PRESSURE DPF266 ATEX/IECEx Exd, Exi & INDUSTRIAL DIFFERENTIAL PRESSURE, SWITCH This rnge hs been used to monitor very smll chnges in vcuums nd hs been specified extensively for offshore
More informationMechanical Fail-Safe Damper Actuator NFA
2-FON echnicl Fil-Sfe Dmper Actutor NFA ctutor emergency function for djusting ir dmpers in ventiltion nd ir conditioning systems in uildings orque Nm Nominl voltge AC 24..4V / DC 24..V Control: Open-close
More information2/2, 3/2 and 4/2 directional seat valve with mechanical, manual or fluidic operation
/, / nd / directionl set vlve with mechnicl, mnul or fluidic opertion RE 0/10.06 /1 ype M-.S.. Sizes 6 nd 10 Component series X Mximum operting pressure 0/ r Mximum flow 0 l/min H701+70+70 le of contents
More informationRoller and ball bars for easy and safe die change
Roller nd bll brs for esy nd sfe die chnge T-slot tolernces cc. to DIN 6 b c h n min. mx. mx. 8 H8 + +,6 H8 37 +3 +,6 8 H8 +4 0 + 48 56,6 H8 56 +4 5 +3 6 7,5 Dimensions in mm h min. = smllest dimension
More informationTie-rod Type Hydraulic Cylinder
Tie-rod Type ydrulic Cylinder Series C CQ Series C C CN C CS C C Relted Equipment Nominl pressure: 3. P : 4,,,, 1,, D- Courtesy of Steven Engineering, Inc.-3 Ryn Wy, South Sn rncisco, C 4-7-in Office:
More information4/3, 4/2 and 3/2 explosion-proof solenoid directional valve
01/06 4/3, 4/2 nd 3/2 explosion-proof solenoid directionl vlve Type G...WE6...L6X 2.21 Size (NG) 6 Up to 350 br Up to 80 L/min Contents Function nd configurtion Specifictions 03 Spool symbols 03 Technicl
More informationSTANDARD AND FULL HEIGHT - REAR LOAD - WITH 40mm (1 16") CEN I, CEN III GAS or CEN IV GAS SAFES
L STNDRD ND FULL HEIGHT - RER LOD - WITH 0mm ( 6") "LL DIMENSIONS ND DESIGN CRITERI PGE OF 8 FRONT - STNDRD HEIGHT SEE PGES and FOR CS 00 STNDRD HEIGHT DETILS FRONT - FULL HEIGHT SEE PGES and FOR CS 00
More informationProportional directional valves
/4 Proportionl directionl vlves 6.9 Type 4WRE nd 4WREE NG 6 nd p to r p to 8 L/min Contents Function nd configurtion Symols Ordering code Technicl dt 4 Electricl connections, plug-in connectors Integrted
More informationWirewound Resistor, Industrial High Power, Vitreous Tubular, Adjustable, Low Values 0.12 to 560
Wirewound Resistor, Industrial High Power, Vitreous Tubular, djustable, Low Values to 560 FETURES High power rating: 16 W to 600 W at 25 C Heavy overloads 10 P n 15 s 1 % Low ohmic values 0.10 available
More informationProduct range MEGAlife
Product rnge Fx enquiries: +49 89 76909-11 sles@iwis.com MEGAlife MEGAlife mintennce free roller nd conveyor chins cn be pplied in ll res where post instlltion lubriction is not t ll or only prtly possible.
More information6/2 way directional valve type 6/2UREM6 and 6/2URMM6
6/2 wy directionl vlve type 6/2UREM6 nd 6/2URMM6 NS 6 dm 3 up to 35 MP up to 5 /min DT SHEET - SERVICE MNU NUL WK 421 54 11.212 PPLICTION Moile 6 wy 2 position stckle directionl vlves type 6/2UREM6...
More informationPERSEUS MEDIUM PRESSURE PF61 & PF62 PERSEUS ATEX/ IECEx OR TRI- CERTIFIED WITH AEx (NEC 505) Exd, Exia & INDUSTRIAL PRESSURE SWITCH
PERSEUS MEDIUM PRESSURE PF6 & PF62 PERSEUS ATEX/ IECEx OR TRI- CERTIFIED ITH AEx (NEC 5) Exd, Exi & INDUSTRIAL PRESSURE SITCH This rnge of switches fetures robust high qulity housing with or 2 seled SPDT
More informationSafety Relay Unit. Ordering Information. Ultra Slim Safety Relay
Sfety Rely Unit Ultr Slim Sfety Rely Unit Models of width 17.5 mm (smllest Unit in the world s of Jnury 2001) vilble with 2 or 3 poles. Models of width 22.5 mm with 3 poles lso vilble. EN stndrds (TÜV
More informationRPE3-06. Functional Description HA /2008. Solenoid Operated Directional Control Valves. Replaces HA /2006
Solenoid Operted Directionl Control Vlves RE3-06 10/2008 Size 06 p mx up to 320 br Q mx up to 80 L/min Replces 11/2006 4/3, 4/2 wy directionl control vlves Solenoids cn be turned round their xis to ny
More informationVishay Dale Inductors
IM Inductors Military, MIL-C- ualified, Type LT and Commercial, Molded FETURES Wide inductance range in small package. Flame retardant coating. Precision performance, excellent reliability, sturdy construction.
More informationCS 7750 FULL FUNCTION TERMINAL 15" OR 19" DISPLAY - THROUGH THE WALL 330mm (13")
L08 CLL -800--600 " OR " DISPLY - THROUGH THE WLL 0mm (") 40mm ( 6") CEN I CONSULT WITH DIEBOLD NIXDORF INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE
More information4%$ %%X 0RODUCT!PPLICATION 4HE "OTH 4%$ FOR 4%$ 80 DUSTTIGHT 2ATINGS
5-4.1 Termintor TM ZT EEx ed Pipewll Sensing Thermostts Product Specifictions Appliction... Electric Het Trcing ontrol The ZT-WP nd ZT-XP re designed for use s djustble control thermostts for freeze protection
More information2/2, 3/2 and 4/2 directional poppet valve with solenoid actuation
0/0 /, / nd / directionl poppet vlve with solenoid ctution.7 Type M-.SEW...LX Size Up to 0 r Up to 0 L/min Contents Function nd configurtion Symols 0 Specifiction 0 Technicl dt 0 Electricl dt 0 Chrcteristic
More informationRPE3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated. Replaces HA /2009
Directionl Control Vlves Solenoid Operted RE3-06 Size D 06 (03) 350 br (5076 SI) 80 L/min(21 GM) Size D 06 (03) p mx 320 br (4641SI) ccording to CSA 80 L/min(21 GM) HA 4010 11/2011 Replces HA 4010 12/2009
More informationElectrically controlled directional control poppet valve type UREZ6
LICION Electriclly controlled directionl control poppet vlve type UREZ6 is intended for chnging the direction of hydrulic fluid flow in system, which llows for chnge of the direction of the receiver motion
More information* * * DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CONSUMER ACCESS DIMENSIONS PLAN VIEW 19" DISPLAY FRONT ELEVATION
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER- FRONT LOD " DISPLY OR " DISPLY WITH mm ( ") UL SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE
More information4/2 and 4/3 Solenoid Directional Valve, ISO Size 03
4/ nd 4/3 Solenoid Directionl Vlve, ISO Size 03 Q mx = 60 l/min, p mx = 315 r wo-stge design, with EX-sfty solenoid coil Vlve: High switching relilility thnks to two-stge follower spool design Slip-on
More informationSolenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl
More information3/2 and 4/2-way Directional Poppet Valves with Solenoid Operation Model M-SED 6, Series 1X. Size 6 (350 bar) H/A 4243/94
3/2 nd 4/2-wy Directionl oppet Vlves with Solenoid Opertion Model M-SED 6, Series X Size 6 000 SI (30 r) 6.6 GM (2 L/min) R 22 049/06.98 R 22 049/06.98 Replces: 02.96 Fetures: Direct operted directionl
More informationEx-proof proportional valves multicertification ATEX, IECEx, EAC
Tble F600-5/E Ex-proof proportionl vlves multicertifiction ATEX, IECEx, EAC DLHZA-T-040 vlve body ex-proof solenoid ex-proof trnsducer (only for proportionl -T vlves) threded connections for cble clmp
More informationEFFEKTA. Solar inverter HX-Series NEU / NEW
EFFEKTA Power Supplies EFFEKTA Hungry Kft. H-678 Szeged, Dorozsmi út. inverter Solr inverter HX-Series Multifunctionl Photovoltic inverter for off-grid stnd-lone opertion s well s grid-connected opertion
More informationMurtfeldt Internet Chain Tensioners for Roller Chains to DIN8187
Murtfeldt Internet www.murtfeldt.de Chin Tensioners for Roller Chins to DIN8187 185 186 Murtfeldt E-mil info@murtfeldt.de Murtfeldt Fxline +49-231- 25 10 21 Chin Tensioners with Arc Segment Profile for
More informationSpecifiable Features. Compatible with all UL 1686 listed plugs and receptacles. Type P Cable. Lockout Compliant. PowerMate Features and Benefits
PowerMte Fetures nd Benefits Type P Cle Lockout Complint Specifile Fetures Lockout Plug Sfety Insultor Dimond Clmp Split Pin Contcts Type P Cle Comptile with ll UL 686 listed plugs nd receptcles. 2 3 4
More informationAll the work described in sections A, B, C, D, and E must be carried out in full before the wheel/tyre combination may be used.
mb cdef Instlltion Instructions Conversion to 16-inch tyres nd 7 1/2 J _ 16 H 2 ET 40 disk wheel 40.11 Model 124 Excluding vehicles with specil bodywork, sedns with long wheelbse nd 124.031/036/051/091/290/393.
More information@ ECV Technical Data High Lift Pallet Truck. ECV 10 C ECV 10i C ECV 10
@ ECV Technicl Dt High Lift Pllet Truck ECV 10 C ECV 10i C ECV 10 Lifting Mde Esy This specifiction sheet to VDI Guideline 198, only provides the technicl vlues for the stndrd truck. Different tyres, other
More informationABB industrial drives. Mechanical installation instructions ACS880 multidrive cabinets
ABB industril drives Mechnicl instlltion instructions ACS880 multidrive cbinets List of relted mnuls Generl drive mnuls (in ll deliveries) Electricl plnning instructions for ACS880 multidrive cbinets nd
More information3-Way Ball Valve Assemblies Using TAC DuraDrive Actuators
3-Wy Bll Vlve Assemblies Using TAC DurDrive Actutors Note: All vlve sizes ANSI Clss IV (0.01% of C v ) shut off, piped coil-side outlet to A. Tble-5 Selection Chrt3-Wy Mixing Bll Vlve Assemblies with TAC
More informationTS1.5 Flat Base Pole Spacing 8mm (.315) Mounting Hole Diameter 2.8mm (.110) Stripping Length 5mm (.197)
-TRU T S URSTRPS 300V - Pnel ount or wire-to-wire connections in V, pplince, equipment, power distribution nd other industril pplictions with strict budget nd spce requirements. sy to use double row terminl
More informationPOWER COMBICON Plugs and Headers PC 6/ for Currents up to 41 A, mm Pitch
POWER COMBICON Plugs nd Heders PC 6/ for Currents up to 41 A, The PC 6 plug connector fetures highly conductive metl lloys to offer current crrying cpcity of 41 A t rted voltge of 1000 V. A double steel
More informationORIENTAL MOTOR GENERAL CATALOG. Linear Heads A-227. Features A-228 General Specifications A-232 Product Specifications A-233. Standard AC Motors
ORIENTAL MOTOR GENERAL CATALOG Stndrd AC Motors Induction Motors Reversible Motors Synchronous Motors Liner Heds Fetures A-228 Generl Specifictions A-232 Product Specifictions A-233 Torque Motors FBL2
More informationINSTALLATION INSTRUCTIONS READ "SAFETY MANUAL" AND "USER MANUAL" BEFORE STARTING THE UPS INSTALLATION LAYOUT INFORMATION FANS FANS REMOVIBILE COVER
INSTLLTION INSTRUCTIONS RED "SFETY MNUL" ND "USER MNUL" BEFORE STRTING THE UPS INSTLLTION LYOUT INFORMTION FNS IR FLOW IR FLOW! HOT FNS REMOVIBILE COVER FRONT VIEW SIDE VIEW RER VIEW PERSPECTIVE VIEW PERSPECTIVE
More informationMineral-Insulated RTD Temperature Probe According to DIN EN 60751
ata Sheet 902210 Page 1/12 Mineral-Insulated RT Temperature Probe According to IN EN 60751 For temperatures from -50 (-200) to +600 C Flexible sheath cable with vibration-resistant measuring insert As
More informationSHEET 1 OF 6
REVISIONS REV DESCRIPTION CHG.NO. PP'D DTE SENSOR WELD NECK MOUNTING FLNGE & WELD FTG. (FCTORY WELDED) VILBLE IN SME B16.5 RF & RTJ, ND EN 1092-1 RF. REFER TO TBLE 1 ON SHEET 2 OR FOR S ND DIMENSIONS NEW
More information3700 LOBBY CASH RECYCLER. REAR LOAD 13mm ( 2") UL SAFE - 15" DISPLAY OR 19" DISPLAY WITH DETAILS FOR OPTIONAL VESTIBULE INSTALLATION
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER RER LOD mm ( ") UL SFE - " DISPLY OR " DISPLY WITH DETILS FOR OPTIONL VESTIBULE INSTLLTION CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR
More information4/3-4/2 Directional valve elements L8_81 (ED4-P1) with or without LS connections. RE Edition: Replaces:
4/ - 4/ Directionl vlve elements L8_81 with proportionl (ED4-1) control nd with or without LS connections L8_81 (ED4-1) RE 181-1 Edition: 9.18 Replces: 7.1.17 Size Series Mximum operting pressure r (4
More informationSTEEL WIRE & ROPE FITTINGS
6 Contents Bever mintins wie rnge of wire rope n fittings tht cn be use for towing n lifting, pplictions. Furthermore Bever hs the bility to offer mnufcture slings me to orer. With Bever s ISO Qulity n
More informationSolenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, PDF ctlogs nd opertion mnuls Solenoid Pilot Operted Directionl
More information* * * 3700 LOBBY CASH RECYCLER. REAR LOAD 13mm ( 2") UL SAFE - 15" DISPLAY OR 19" DISPLAY WITH DETAILS FOR OPTIONAL VESTIBULE INSTALLATION
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER RER LOD mm ( ") UL SFE - " DISPLY OR " DISPLY WITH DETILS FOR OPTIONL VESTIBULE INSTLLTION CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR
More informationDIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CEN I, CEN III GAS, CEN IV GAS or CEN IV GAS EX SAFES
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER- FRONT LOD " DISPLY OR " DISPLY CEN I, CEN III GS, CEN IV GS or CEN IV GS EX SFES CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL
More informationCS 7780 FULL FUNCTION DRIVE-UP TERMINAL
L CLL -800--600 CS 80 FULL FUNCTION DRIVE-UP TERMINL mm ( ") UL - "or " DISPLY THROUGH 0mm (8") MXIMUM WLL CONSULT WITH DIEBOLD NIXDORF INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE
More informationFree Machining Austenitic Ferritic + Martensitic Pure Titanium Titanium Alloys Stainless Steels Stainless Steels <950N/mm 2
& - Tps For Stinless Steels These top qulity Tps re mde in Switzerlnd, by DC-Swiss, one of the leding Tp Mnufcturers in Europe. All the Tps re mde of - (Powder Metl). This mteril hs proven to be the best
More informationSSAB Water mains PIPES AND FITTINGS
SSAB Wter mins PIPES AND FITTINGS Pipes nd fittings mnufctured y SSAB re used primrily with wter pipeline sizes DN 400-1200. The fittings re mde of steel pressure pipes (ex works delivery) nd cn e coted
More information