ALLROUNDER 1200 T. Table diameter: 1200 mm Clamping force: 800, 1000, 1600, 2000 kn Injection unit (acc. to EUROMAP): 70, 100, 170, 290, 400, 800

Size: px
Start display at page:

Download "ALLROUNDER 1200 T. Table diameter: 1200 mm Clamping force: 800, 1000, 1600, 2000 kn Injection unit (acc. to EUROMAP): 70, 100, 170, 290, 400, 800"

Transcription

1 Fcts nd figures ALLROUNDER 12 T Tble dimeter: 12 mm Clmping force: 8, 1, 16, 2 kn (cc. to EUROMAP): 7, 1, 17, 29, 4, 8

2 12 T Mchine dimensions up to 1 kn 385 1) 323 2) ) 366 4) 391 5) 331 1) 346 2) ) ) 39 5) NCG Mounting surfce rotry tble Horizontl version 1 Mounting surfce rotry tble )3)4) 225 1) 224 5) ) NCG 7) Electricl connection 291 1) 355 2) 337 3) 349 4) 376 1) 7 5) 2) injection unit 1 3) injection unit 17 4) injection unit 29 5) 4 6) The control cbinet length nd position of the electricl connection cn vry due to optionl equipment 7) Position of cooling wter connections cn vry due to optionl equipment NCG - Non-contcting gurd (photoelectric sfety brrier) Cooling wter connection 2

3 Mchine dimensions from 16 kn 12 T 1) 2) 3) 4) ) 2) 3) 4) NCG 1 Rotry plten Horizontl version 1 Rotry plten 1) 2) 3) 4) ) NCG 6) Electricl connection 1) 2) 3) 4) ) 17 2) injection unit 29 3) injection unit 4 4) injection unit 8 5) The control cbinet length nd position of the electricl connection cn vry due to optionl equipment 6) Position of cooling wter connections cn vry due to optionl equipment NCG - Non-contcting gurd (photoelectric sfety brrier) Cooling wter connection 3

4 12 T Technicl dt Clmping unit with clmping force mx. kn 12 T 8 Opening force stroke mx. kn mm Mould height, fixed vrible min. mm Plten dylight fixed vrible mx. mm Tble dimeter mm 12 Angle of rottion, left/right Rottion time for 18 min. s 18 1,6 Weight on rotry tble mx. kg 75 Weight of movble mould hlf mx. kg 4 Ejector force stroke mx. kn mm Dry cycle time EUROMAP ² 2 pumps min. s - mm 3,7-24 Accum. min. s - mm --- with screw dimeter mm Effective screw length L/D 24,5 2 17, ,7 Screw stroke mx. mm 9 1 Clculted stroke volume mx. cm³ Shot weight mx. g PS Mteril throughput mx. kg/h PS 4,1 5,5 6,5 5,5 8 9,5 mx. kg/h PA6.6 2,1 2,8 3,3 2,8 4 4,9 Injection pressure mx. br Holding pressure mx. br Injection flow ² 2 pumps mx. cm³/s Accum. mx. cm³/s Screw circumferentil 2 pumps mx. m/min speed ² Accum. mx. m/min Screw torque mx. Nm Nozzle contct force retrction stroke mx. kn mm Heting cpcity zones kw 4,1 4 4,9 5 Feed hopper l 25 5 Drive nd connection with injection unit 7 2 pumps 1 7 Accum. 1 Net weight of mchine kg Sound press. level Insecurity ⁴ db(a) Oil filling l Drive power ² mx. kw 18,5 --- Electricl connection ³ kw Totl A Mchine A Heting A Cooling wter connection mx. C min. Δp br 1,5 DN 25 1,5 DN 25 Mchine type with EUROMAP size designtion ¹ 12 T Upon request: other mchine types nd mould instlltion heights, screws, drive powers etc. All specifictions relte to the bsic mchine version. Devitions re possible depending on vrints, process settings nd mteril type. Depending on the drive, certin combintions, e.g. mx. injection pressure nd mx. injection flow my be mutully exclusive. 1) Clmping force (kn) - lrge injection unit = mx. stroke volume (cm³) x mx. injection pressure (kbr) 2) Specifictions depend on the drive vrint / drive configurtion. 3) Specifictions relte to 4 V/5 Hz. 4) Emission sound pressure level t the workplce. Detiled informtion in the operting instructions. [ ] Specifictions pply to lterntive equipment. 4

5 Technicl dt 12 T Clmping unit with clmping force mx. kn 12 T 1 Opening force stroke mx. kn mm Mould height, fixed vrible min. mm Plten dylight fixed vrible mx. mm Tble dimeter mm 12 Angle of rottion, left/right Rottion time for 18 min. s 18 1,6 Weight on rotry tble mx. kg 75 Weight of movble mould hlf mx. kg 4 Ejector force stroke mx. kn mm Dry cycle time EUROMAP ² 2 pumps min. s - mm 3,7-24 Accum. min. s - mm --- with screw dimeter mm Effective screw length L/D ,3 2 17, Screw stroke mx. mm Clculted stroke volume mx. cm³ Shot weight mx. g PS Mteril throughput mx. kg/h PS 1 13, ,5 24, mx. kg/h PA ,5 1,5 12,5 12, ,5 Injection pressure mx. br Holding pressure mx. br Injection flow ² 2 pumps mx. cm³/s Accum. mx. cm³/s Screw circumferentil 2 pumps mx. m/min speed ² Accum. mx. m/min Screw torque mx. Nm Nozzle contct force retrction stroke mx. kn mm Heting cpcity zones kw 9,4 5 6,4 5 9,4 5 Feed hopper l Drive nd connection with injection unit 17 2 pumps Accum Net weight of mchine kg Sound press. level Insecurity ⁴ db(a) Oil filling l Drive power ² mx. kw 18,5 18, Electricl connection ³ kw Totl A Mchine A Heting A Cooling wter connection mx. C min. Δp br 1,5 DN 25 1,5 DN 25 Mchine type with EUROMAP size designtion ¹ 12 T Upon request: other mchine types nd mould instlltion heights, screws, drive powers etc. All specifictions relte to the bsic mchine version. Devitions re possible depending on vrints, process settings nd mteril type. Depending on the drive, certin combintions, e.g. mx. injection pressure nd mx. injection flow my be mutully exclusive. 1) Clmping force (kn) - lrge injection unit = mx. stroke volume (cm³) x mx. injection pressure (kbr) 2) Specifictions depend on the drive vrint / drive configurtion. 3) Specifictions relte to 4 V/5 Hz. 4) Emission sound pressure level t the workplce. Detiled informtion in the operting instructions. [ ] Specifictions pply to lterntive equipment. 5

6 12 T Technicl dt Clmping unit with clmping force mx. kn 12 T T 2 Opening force stroke mx. kn mm Mould height, fixed vrible min. mm Plten dylight fixed vrible mx. mm Tble dimeter mm Angle of rottion, left/right Rottion time for 18 min. s 18 1,6 18 1,6 Weight on rotry tble mx. kg Weight of movble mould hlf mx. kg 4 4 Ejector force stroke mx. kn mm Dry cycle time EUROMAP ² 2 pumps min. s - mm 3,7-24 3,7-24 Accum. min. s - mm with screw dimeter mm Effective screw length L/D Screw stroke mx. mm 16 2 Clculted stroke volume mx. cm³ Shot weight mx. g PS Mteril throughput mx. kg/h PS mx. kg/h PA6.6 12, , Injection pressure mx. br Holding pressure mx. br Injection flow ² 2 pumps mx. cm³/s Accum. mx. cm³/s Screw circumferentil 2 pumps mx. m/min speed ² Accum. mx. m/min Screw torque mx. Nm Nozzle contct force retrction stroke mx. kn mm Heting cpcity zones kw 9,4 5 19,9 8 Feed hopper l 5 5 Drive nd connection with injection unit 4 2 pumps 8 4 Accum. 8 Net weight of mchine kg Sound press. level Insecurity ⁴ db(a) Oil filling l Drive power ² mx. kw Electricl connection ³ kw Totl A Mchine A Heting A Cooling wter connection mx. C min. Δp br 1,5 DN 25 1,5 DN 25 Mchine type with EUROMAP size designtion ¹ 12 T T 2-8 Upon request: other mchine types nd mould instlltion heights, screws, drive powers etc. All specifictions relte to the bsic mchine version. Devitions re possible depending on vrints, process settings nd mteril type. Depending on the drive, certin combintions, e.g. mx. injection pressure nd mx. injection flow my be mutully exclusive. 1) Clmping force (kn) - lrge injection unit = mx. stroke volume (cm³) x mx. injection pressure (kbr) 2) Specifictions depend on the drive vrint / drive configurtion. 3) Specifictions relte to 4 V/5 Hz. 4) Emission sound pressure level t the workplce. Detiled informtion in the operting instructions. [ ] Specifictions pply to lterntive equipment. 6

7 12 T 7

8 12 T Mould instlltion dimensions up to 1 kn 112 1) 9 1) Stroke mx mx. 6 mx. 4 min. 25 Y mx. 6 B A mx. Stndrd 7 / 1 / 17 / Thermoset 15 5 Horizontl version 79±,2 15 Ø17 Ø32 Ø125,5+,3 Ø6 Mould ejector bolt 1±, Ø8 Ø Ø9 b Ø Ø9 Ø11 b 1 b Ø82 b 4 Ø5 c Ø6 c Ø6 c Ø64 Ø43 c 4 Ø8 Ø9 Ø82 Ø Ejector bolt (vrible) (set in ccordnce with mould prting line) Stroke mx. 175 Injection mould mould mounting surfce min. mx. b min. c min. 7 / 1 / 17 / Bore in mould (if required) / 29 4 Bore in mould (if required) Y Ø5 Ø6 7 1 / 17 / 29 1) Dimension from tble centre (projecting edge protection + sliding gurd) Ø43 Ø64 4 Ø65 4 Thermoset version 8

9 Mould instlltion dimensions up to 1 kn 12 T Moving mould mounting plten B 2x Ø12H7 x 2 Ø75 Ø5 1) Ø6 2) Ø125H7 125±,2 125±, Mould mounting plten (rotry tble) A Pos for 2 mould clmping positions Ø71 1 Ø11 M12-24 deep Ø6 / Ø125,5+,3 x 15 for hydrulic ejector 2 Ø12 61 Useble clmping surfce Mould grid dimensions 2-sttion mould * Ø12 1) 7 / 1 / 17 / 29 2) 4 *Temperture control option

10 12 T Mould instlltion dimensions up to 16 kn 112 1) 9 1) Stroke mx mx. 6 mx. 4 min. 25 Y mx. 6 B A mx. Stndrd 17 / 29 4 / Thermoset 15 5 Horizontl version Ejector bolt (vrible) (set in ccordnce with mould prting line) Stroke mx ±,2 15 Ø17 Ø32 Ø6 Ø125,5+,3 Injection mould 1 ±,2 Mould ejector bolt 17 mould mounting surfce min. mx. b min. c min. 17 / Bore in mould (if required) 2 4 Ø9 Ø82 Ø11 1) Ø125 2) Ø9 Ø11 1 b Ø82 b 4 Ø6 c Ø64 Ø43 c 17 / 29 4 / 8 Bore in mould (if required) Y Ø6 17 / 29 1) Dimension from tble centre (projecting edge protection + sliding gurd) 2) 4 3) 8 Ø43 Ø64 4 / 8 Ø65 1) Ø7 2) 4 1) / 8 2) Thermoset version 1

11 Mould instlltion dimensions up to 16 kn 12 T Moving mould mounting plten B 2x Ø12H7 x 2 Ø6 2) Ø9 Ø5 1) Ø125H7 125±,2 125±, Mould mounting plten (rotry tble) A Pos for 2 mould clmping positions Ø71 1 Ø11 M12-24 deep Ø6 / Ø125,5+,3 x 15 for hydrulic ejector 2 61 Ø12 Useble clmping surfce Mould grid dimensions 2-sttion mould * 12 Ø12 1) 17 / 29 2) 4 / 8 *Temperture control option

12 12 T Shot weights Theoreticl shot weights for the most importnt injection moulding mterils s ccording to EUROMAP Screw dimeter mm Polystyrene mx. g PS Styrene heteropolymeriztes mx. g SB mx. g SAN, ABS 1) Cellulose cette mx. g CA 1) Cellulosecetobutyrte mx. g CAB 1) Polymethyl methcrylte mx. g PMMA Polyphenylene ether, mod. mx. g PPE Polycrbonte mx. g PC Polysulphone mx. g PSU Polymides mx. g PA 6.6 PA 6 1) mx. g PA 6.1 PA 11 1) Polyoximethylene (Polycetl) mx. g POM Polyethylene terephthlte mx. g PET Polyethylene mx. g PE-LD mx. g PE-HD Polypropylene mx. g PP Fluorpolymerides mx. g FEP, PFA, PCTFE 1) mx. g ETFE Polyvinyl chloride mx. g PVC-U mx. g PVC-P 1) s ccording to EUROMAP Screw dimeter mm Polystyrene mx. g PS Styrene heteropolymeriztes mx. g SB mx. g SAN, ABS 1) Cellulose cette mx. g CA 1) Cellulosecetobutyrte mx. g CAB 1) Polymethyl methcrylte mx. g PMMA Polyphenylene ether, mod. mx. g PPE Polycrbonte mx. g PC Polysulphone mx. g PSU Polymides mx. g PA 6.6 PA 6 1) mx. g PA 6.1 PA 11 1) Polyoximethylene (Polycetl) mx. g POM Polyethylene terephthlte mx. g PET Polyethylene mx. g PE-LD mx. g PE-HD Polypropylene mx. g PP Fluorpolymerides mx. g FEP, PFA, PCTFE 1) mx. g ETFE Polyvinyl chloride mx. g PVC-U mx. g PVC-P 1) ) verge vlue 12

13 12 T ARBURG GmbH + Co KG Arthur-Hehl-Strsse 7229 Lossburg Tel.: contct@rburg.com With loctions in Europe: Germny, Belgium, Denmrk, Frnce, United Kingdom, Itly, Netherlnds, Austri, Polnd, Switzerlnd, Slovki, Spin, Czech Republic, Turkey, Hungry Asi: People s Republic of Chin, Indonesi, Mlysi, Singpore, Tiwn, Thilnd, United Arb Emirtes Americ: Brzil, Mexico, USA For more informtion, plese go to ARBURG GmbH + Co KG The brochure is protected by copyright. Any utilistion, which is not expressly permitted under copyright legisltion, requires the previous pprovl of ARBURG. All dt nd technicl informtion hve been compiled with gret cre. However we ccept no responsibility for correctness. Individul illustrtions nd informtion my devite from the ctul delivery condition of the mchine. The relevnt vlid operting instructions re pplicble for the instlltion nd opertion of the mchine. ARBURG GmbH + Co KG DIN EN ISO certified 52263_EN_GB_3218 Subject to ltertions

ALLROUNDER 470 A. Distance between tie bars: 470 x 470 mm Clamping force: 1000 kn Injection unit (acc. to EUROMAP): 170, 290, 400

ALLROUNDER 470 A. Distance between tie bars: 470 x 470 mm Clamping force: 1000 kn Injection unit (acc. to EUROMAP): 170, 290, 400 ALLROUNDER 470 A Distance between tie bars: 470 x 470 mm Clamping force: 1000 kn Injection unit (acc. to EUROMAP):, 290, 400 MACHINE DIMENSIONS 470 A 840 330 438 1302 2050 2124 1)2) 2139 3) 400 1109 max.

More information

ALLROUNDER 570 E. Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800

ALLROUNDER 570 E. Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800 ALLROUNDER 570 E Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800 MACHINE DIMENSIONS 570 E 1900 850 150 330 520 1285 825 435 605 1000 280 5185

More information

ALLROUNDER 520 H. Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800

ALLROUNDER 520 H. Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800 ALLROUNDER 520 H Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800 MACHINE DIMENSIONS 520 H 2002 1348 255 849 120 330 max. 385 438 507 800

More information

ALLROUNDER 920 S. Distance between tie bars: 920 x 920 mm Clamping force: 5000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600

ALLROUNDER 920 S. Distance between tie bars: 920 x 920 mm Clamping force: 5000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600 ALLROUNDER 920 S Distance between tie bars: 920 x 920 mm Clamping force: 5000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600 MACHINE DIMENSIONS 920 S 2425 4) 2530 5) 1670 4) 1697 5) 848 4) 878 5)

More information

ALLROUNDER 570 H. Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800, 1300.

ALLROUNDER 570 H. Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800, 1300. Facts and figures ALLROUNDER 57 H Distance between tie bars: 57 x 57 mm Clamping force: 2 kn Injection unit (acc. to EUROMAP): 4, 8, 13 www.arburg.com 57 H Machine dimensions 22 148 85 438 2242 1) 2251

More information

ALLROUNDER 920 A. Distance between tie bars: 920 x 920 mm Clamping force: 4600, 5000 kn Injection unit (acc. to EUROMAP): 1300, 2100

ALLROUNDER 920 A. Distance between tie bars: 920 x 920 mm Clamping force: 4600, 5000 kn Injection unit (acc. to EUROMAP): 1300, 2100 ALLROUNDER 920 A Distance between tie bars: 920 x 920 mm Clamping force: 4600, 5000 kn Injection unit (acc. to EUROMAP): 1300, 2100 MACHINE DIMENSIONS 920 A 877 239 707 1100 2229 1207 1697 2671 max.430

More information

ALLROUNDER 270 A. Distance between tie bars: 270 x 270 mm Clamping force: 350 kn Injection unit (acc. to EUROMAP): 5, 70, 100.

ALLROUNDER 270 A. Distance between tie bars: 270 x 270 mm Clamping force: 350 kn Injection unit (acc. to EUROMAP): 5, 70, 100. Facts and figures ALLROUNDER 27 A Distance between tie bars: 27 x 27 mm Clamping force: 35 kn Injection unit (acc. to EUROMAP): 5, 7, 1 www.arburg.com 27 A Machine dimensions 238 122 12 425 254 438 191

More information

ALLROUNDER 520 A multi-component

ALLROUNDER 520 A multi-component Facts and figures ALLROUNDER 52 A multi-component Distance between tie bars: 52 x 52 mm Clamping force: 15 kn Injection unit: 29, 4, 8 horizontal 7, 17, 29 vertical www.arburg.com 52 A multi-component

More information

ALLROUNDER 520 S. Distance between tie bars: 520 x 520 mm Clamping force: 1300, 1500, 1600 kn Injection unit (acc. to EUROMAP): 290, 400, 800

ALLROUNDER 520 S. Distance between tie bars: 520 x 520 mm Clamping force: 1300, 1500, 1600 kn Injection unit (acc. to EUROMAP): 290, 400, 800 Facts and figures ALLROUNDER 520 S Distance between tie bars: 520 x 520 mm Clamping force: 1300, 1500, 1600 kn Injection unit (acc. to EUROMAP): 290, 400, www.arburg.com 520 S Machine dimensions 580 330

More information

ALLROUNDER 470 S. Distance between tie bars: 470 x 470 mm Clamping force: 800, 1000, 1100 kn Injection unit (acc. to EUROMAP): 170, 290, 400

ALLROUNDER 470 S. Distance between tie bars: 470 x 470 mm Clamping force: 800, 1000, 1100 kn Injection unit (acc. to EUROMAP): 170, 290, 400 Facts and figures ALLROUNDER 470 S Distance between tie bars: 470 x 470 mm Clamping force: 800, 1000, 1100 kn Injection unit (acc. to EUROMAP):, 290, 400 www.arburg.com 470 S Machine dimensions 585 330

More information

820 S. Machine dimensions. Electrical connection. Cooling water connection 850 6) 878 7) 960 5) 113/438 4) ) ) ) )6) )

820 S. Machine dimensions. Electrical connection. Cooling water connection 850 6) 878 7) 960 5) 113/438 4) ) ) ) )6) ) Facts and figures ALLROUNDER 820 S Distance between tie bars: 820 x 820 mm Clamping force: 4000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600 www.arburg.com 820 S Machine dimensions 2250 5) 2342

More information

ALLROUNDER 820 A. Distance between tie bars: 820 x 820 mm Clamping force: 3700, 4000 kn Injection unit (acc. to EUROMAP): 1300, 2100

ALLROUNDER 820 A. Distance between tie bars: 820 x 820 mm Clamping force: 3700, 4000 kn Injection unit (acc. to EUROMAP): 1300, 2100 ALLROUNDER 820 A Distance between tie bars: 820 x 820 mm Clamping force: 3, 4000 kn Injection unit (acc. to EUROMAP): 1300, 2100 MACHINE DIMENSIONS 820 A 875 567 707 1100 178 433 482 2355 625 2800 3) 7476

More information

ALLROUNDER 520 E. Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800.

ALLROUNDER 520 E. Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800. Facts and figures ALLROUNDER 52 E Distance between tie bars: 52 x 52 mm Clamping force: 15 kn Injection unit (acc. to EUROMAP): 29, 4, www.arburg.com 52 E Machine dimensions 2 135 85 12 33 4 13 625 4885

More information

ALLROUNDER 370 E. Distance between tie bars: 370 x 370 mm Clamping force: 600 kn Injection unit (acc. to EUROMAP): 170, 290.

ALLROUNDER 370 E. Distance between tie bars: 370 x 370 mm Clamping force: 600 kn Injection unit (acc. to EUROMAP): 170, 290. Facts and figures ALLROUNDER 37 E Distance between tie bars: 37 x 37 mm Clamping force: 6 kn Injection unit (acc. to EUROMAP): 17, 29 www.arburg.com 37 E Machine dimensions 215 122 85 12 33 435 192 245

More information

ALLROUNDER 170 S. Distance between tie bars: 170 x 170 mm Clamping force: 125, 150, 180 kn Injection unit (acc. to EUROMAP): 30, 70

ALLROUNDER 170 S. Distance between tie bars: 170 x 170 mm Clamping force: 125, 150, 180 kn Injection unit (acc. to EUROMAP): 30, 70 ALLROUNDER 1 S Distance between tie bars: 1 x 1 mm Clamping force: 125, 150, 180 kn Injection unit (acc. to EUROMAP): 30, MACHINE DIMENSIONS 1 S 120 1130 850 min. max. 385 330 255 455 3) 1850 1880 385

More information

ALLROUNDER 630 H. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.

ALLROUNDER 630 H. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100. Facts and figures ALLROUNDER 63 H Distance between tie bars: 63 x 63 mm Clamping force: 25 kn Injection unit (acc. to EUROMAP): 8, 13, 21 www.arburg.com 63 H Machine dimensions 858 438 1468 2198 max. 395

More information

ALLROUNDER 720 A Multi-component

ALLROUNDER 720 A Multi-component Facts and figures ALLROUNDER 72 A Multi-component Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit: 8, 13, 21 horizontal 7, 17, 29, 4 vertical www.arburg.com 72 A Multi-component

More information

ALLROUNDER 630 A. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.

ALLROUNDER 630 A. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100. Facts and figures ALLROUNDER Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100 www.arburg.com Machine dimensions 2217 227 1487 max. 450 877

More information

ALLROUNDER 270 C GOLDEN EDITION

ALLROUNDER 270 C GOLDEN EDITION Facts and figures ALLROUNDER 2 C GOLDEN EDITION Distance between tie bars: 2 x 2 mm Clamping force: 4 kn Injection unit (acc. to EUROMAP):, 1 www.arburg.com 2 C GOLDEN EDITION Machine dimensions 85 33

More information

ALLROUNDER 570 C GOLDEN EDITION

ALLROUNDER 570 C GOLDEN EDITION Facts and figures ALLROUNDER 57 C GOLDEN EDITION Distance between tie bars: 57 x 57 mm Clamping force: 2 kn Injection unit (acc. to EUROMAP): 8 www.arburg.com 57 C GOLDEN EDITION Machine dimensions 255

More information

ALLROUNDER 720 H. Distance between tie bars: 720 x 720 mm Clamping force: 3200 kn Injection unit (according to EUROMAP): 1300, 2100, 3200

ALLROUNDER 720 H. Distance between tie bars: 720 x 720 mm Clamping force: 3200 kn Injection unit (according to EUROMAP): 1300, 2100, 3200 Facts and figures ALLROUNDER 72 H Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit (according to EUROMAP): 13, 21, 32 www.arburg.com 72 H Machine dimensions 858 2198 max. 385

More information

ALLROUNDER 630 S. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.

ALLROUNDER 630 S. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100. Facts and figures ALLROUNDER 630 S Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100 www.arburg.com 630 S Machine dimensions 2183 5) 2207

More information

ALLROUNDER 470 S Multi-component

ALLROUNDER 470 S Multi-component Facts and figures ALLROUNDER 47 S Multi-component Distance between tie bars: 47 x 47 mm Clamping force: 11 kn Injection unit: 17, 29, 4 horizontal 3, 7, 1, 17, 29 vertical www.arburg.com Machine dimensions

More information

ALLROUNDER 820 S Multi-component

ALLROUNDER 820 S Multi-component Facts and figures ALLROUNDER 82 S Multi-component Distance between tie bars: 82 x 82 mm Clamping force: 4 kn Injection unit: 21, 32, 46 horizontal 7, 1, 17, 29, 4 vertical www.arburg.com 82 S Multi-component

More information

ALLROUNDER CUBE 2900

ALLROUNDER CUBE 2900 Facts and figures ALLROUNDER CUBE 29 Distance between tie bars: 82 x 82 mm Clamping force: 29 kn Injection unit: 4, 8, 13, 21, 32 horizontal 7, 17, 29, 4, 8, 13 moving www.arburg.com CUBE 29 Machine dimensions

More information

Facts and figures ALLROUNDER 275 V. Vertical free-space system Clamping force: 250 kn Injection unit (according to EUROMAP): 70, 100.

Facts and figures ALLROUNDER 275 V. Vertical free-space system Clamping force: 250 kn Injection unit (according to EUROMAP): 70, 100. Facts and figures ALLROUNDER 275 V Vertical free-space system Clamping force: 250 kn Injection unit (according to EUROMAP):, 100 www.arburg.com 275 V Installation dimensions 900 665 1782 2880 1) 3025 2)

More information

ALLROUNDER 720 S Multi-component

ALLROUNDER 720 S Multi-component Facts and figures ALLROUNDER 72 S Multi-component Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit: 13, 21, 32 horizontal 7, 1, 17, 29, 4 vertical www.arburg.com 72 S Multi-component

More information

Facts and figures ALLROUNDER 375 V. Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 170, 290.

Facts and figures ALLROUNDER 375 V. Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 170, 290. Facts and figures ALLROUNDER 375 V Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 1, 290 www.arburg.com 375 V Installation dimensions Vertical version 1050 850

More information

ALLROUNDER 1800 T. Table diameter: 1800 mm Clamping force: 2000, 2500, 3200 kn Injection unit (acc. to EUROMAP): 400, 800, 1300, 2100

ALLROUNDER 1800 T. Table diameter: 1800 mm Clamping force: 2000, 2500, 3200 kn Injection unit (acc. to EUROMAP): 400, 800, 1300, 2100 LLROUNDER 1 T Table diameter: 1 mm Clamping force: 2000, 2500, 3200 kn (acc. to EUROMP): 400,, 1300, 2100 MCHINE DIMENSIONS UP TO 2000 KN 1 T NCG 1150 997 4165 1) 4145 1) 2457 2110 4625 2) 4525 2) 1600

More information

Facts and figures ALLROUNDER 1500 T

Facts and figures ALLROUNDER 1500 T Facts and figures ALLROUNDER 15 T Table diameter: 59.6 (15 mm) Clamping force: 176, 22, 275, 35 tons : 3.7 oz, 6.1 oz, 8.2 oz, 15.3 oz, 29.1 oz, 45.4 oz www.arburg.com 15 T Machine dimensions up to 22

More information

ALLROUNDER 520 A. Distance between tie bars: x (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.

ALLROUNDER 520 A. Distance between tie bars: x (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15. Facts and figures ALLROUNDER 52 A Distance between tie bars: 2.47 x 2.47 (52 x 52 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.3 oz www.arburg.com 52 A Machine dimensions 78.8 53.7 33.44

More information

ALLROUNDER 570 S. Distance between tie bars: x (570 x 570 mm) Clamping force: 176, 220, 242 tons Injection unit: 8.2 oz, 15.3 oz, 29.

ALLROUNDER 570 S. Distance between tie bars: x (570 x 570 mm) Clamping force: 176, 220, 242 tons Injection unit: 8.2 oz, 15.3 oz, 29. Facts and figures ALLROUNDER 57 S Distance between tie bars: 22. x 22. (57 x 57 mm) Clamping force: 176, 22, 22 tons Injection unit: 8.2 oz, 15.3 oz, 29.1 oz www.arburg.com 57 S Machine dimensions 78.7

More information

ALLROUNDER 570 A. Distance between tie bars: x (570 x 570 mm) Clamping force: 220 tons Injection unit: 8.2 oz, 15.3 oz, 29.

ALLROUNDER 570 A. Distance between tie bars: x (570 x 570 mm) Clamping force: 220 tons Injection unit: 8.2 oz, 15.3 oz, 29. ALLROUNDER 570 A Distance between tie bars: 22.44 x 22.44 (570 x 570 mm) Clamping force: 220 tons Injection unit: 8.2 oz, 15.3 oz, 29.8 oz MACHINE DIMENSIONS 570 A 78.82 55.43 33.46 330 17.24 88.39 1)

More information

ALLROUNDER 270 S. Distance between tie bars: x (270 x 270 mm) Clamping force: 28, 38, 44 tons Injection unit: 1.4 oz, 2.3 oz, 3.

ALLROUNDER 270 S. Distance between tie bars: x (270 x 270 mm) Clamping force: 28, 38, 44 tons Injection unit: 1.4 oz, 2.3 oz, 3. Facts and figures ALLROUNDER 27 S Distance between tie bars: 1.63 x 1.63 (27 x 27 mm) Clamping force: 28, 38, 44 tons Injection unit: 1.4 oz, 2.3 oz, 3.7 oz www.arburg.com 27 S Machine dimensions 78.35

More information

ALLROUNDER 520 E. Distance between tie bars: x (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.

ALLROUNDER 520 E. Distance between tie bars: x (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15. ALLROUNDER 520 E Distance between tie bars: 20.47 x 20.47 (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.3 oz MACHINE DIMENSIONS 520 E 78.74 53.15 33.46 4.72 12.99 15.75 51.18

More information

ALLROUNDER 470 E. Distance between tie bars: 18.5 x 18.5 (470 x 470 mm) Clamping force: 110 tons Injection unit: 3.7 oz, 6.1 oz, 8.

ALLROUNDER 470 E. Distance between tie bars: 18.5 x 18.5 (470 x 470 mm) Clamping force: 110 tons Injection unit: 3.7 oz, 6.1 oz, 8. ALLROUNDER 470 E Distance between tie bars: 18.5 x 18.5 (470 x 470 mm) Clamping force: 110 tons Injection unit: 3.7 oz, 6.1 oz, 8.2 oz MACHINE DIMENSIONS 470 E 51.24 33.44 max.16.34 4.72 80.71 83.62 15.75

More information

ALLROUNDER 320 C GOLDEN EDITION

ALLROUNDER 320 C GOLDEN EDITION Facts and figures ALLROUNDER 32 C GOLDEN EDITION Distance between tie bars: 12.6 x 12.6 (32 x 32 mm) Clamping force: 55 tons Injection unit: 2.3 oz, 3.7 oz www.arburg.com 32 C GOLDEN EDITION Machine dimensions

More information

ALLROUNDER 275 V. Vertical free-space system Clamping force: 28 tons Injection unit: 1.4 oz, 2.3 oz

ALLROUNDER 275 V. Vertical free-space system Clamping force: 28 tons Injection unit: 1.4 oz, 2.3 oz ALLROUNDER 275 V Vertical free-space system Clamping force: 28 tons Injection unit: 1.4 oz, 2.3 oz MACHINE DIMENSIONS 275 V 35.43 2.18 70.1 113.39 1) 119.1 2) 111.81 1) 115.95 2).57 75.1 31.5 35.43 min.35.43

More information

ALLROUNDER 520 A. Tie bar distances: 520 x 520 mm Clamping forces: 1300, 1500 kn Injection units (according to EUROMAP): 400, 800.

ALLROUNDER 520 A. Tie bar distances: 520 x 520 mm Clamping forces: 1300, 1500 kn Injection units (according to EUROMAP): 400, 800. A S GOLDEN EDITION V T K ALLROUNDER Technical data Tie bar distances: 520 x 520 mm Clamping forces: 1300, 1500 kn Injection units (according to EUROMAP):, 800 www.arburg.com Machine dimensions el. connection

More information

A S GOLDEN EDITION V T C ALLROUNDER 270/320 C. Technical Data

A S GOLDEN EDITION V T C ALLROUNDER 270/320 C. Technical Data A S GOLDEN EDITION V T C ALLROUNDER 270/320 C Technical Data Tie bar distances: 270 x 270 mm, 320 x 320 mm Clamping forces: 0, 400, 0, 600 kn Injection units (according to EUROMAP):, 2 www.arburg.com 270/320

More information

ALLROUNDER 470 A multi-component

ALLROUNDER 470 A multi-component A S GOLDEN EDITION V T K ALLROUNDER 470 A multi-component Technical data Tie bar distances: 470 x 470 mm Clamping forces: 800, 1000 kn Injection units (according to EUROMAP): 70,, 400 www.arburg.com 470

More information

ALLROUNDER 270 S Tie bar distance: 270 x 270 mm Clamping forces: 250, 350, 400 kn Injection units (according to EUROMAP): 70, 100, 170

ALLROUNDER 270 S Tie bar distance: 270 x 270 mm Clamping forces: 250, 350, 400 kn Injection units (according to EUROMAP): 70, 100, 170 A S GOLDEN EDITION V T ALLROUNDER Technical data Tie bar distance: 270 x 270 mm Clamping forces: 250, 350, 400 kn Injection units (according to EUROMAP): 70,, 170 www.arburg.com Machine dimensions 1850

More information

Facts and figures MULTILIFT V 6

Facts and figures MULTILIFT V 6 Facts and figures MULTILIFT V 6 www.arburg.com MULTILIFT V 6 Technical data F Stroke X-axis 3) Stroke Z-axis 1) Clamping face fixed mould platen E A K 4) Stroke Y axis 2) D 2) 156 B 4) C 2)4) 123 P 1)

More information

Facts and figures INTEGRALPICKER V.

Facts and figures INTEGRALPICKER V. Facts and figures INTEGRALPICKER V www.arburg.com INTEGRALPICKER V Technical data Stroke, X-axis F Stroke, Y axis Clamping surface fixed mould platen A H K D C B 135 G P Ejection chute B-axis M N L 2 Technical

More information

11 263/ Radial Piston Pump Model R4 /Series 2X Fixed Displacement. Ordering Code 1 PF 1 R4 2X R Replaces:

11 263/ Radial Piston Pump Model R4 /Series 2X Fixed Displacement. Ordering Code 1 PF 1 R4 2X R Replaces: ize.60 to 0.00 Rdil iston ump Model R4 /eries X Fixed Displcement 0,0 I (00 br).9 in /rev (9.4 cm /rev) RA 6/0.9 RA 6/0.9 Replces: 06.89 K 6/ Rdil piston pump with 0 pistons nd prllel shft Chrcteristics:

More information

Facts and figures MULTILIFT SELECT 6

Facts and figures MULTILIFT SELECT 6 Facts and figures MULTILIFT SELECT 6 www.arburg.com MULTILIFT SELECT 6 Technical data Stroke X-axis min. 100 Stroke Z-axis Clamping face, fixed mould platen 190 A D K Stroke Y axis 156 B 2) C 123 P G L

More information

RPEA3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated with 8W Coil. Replaces HA /2007

RPEA3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated with 8W Coil. Replaces HA /2007 Directionl Control Vlves Solenoid Operted with 8W Coil RPEA3-06 0/20 Size 06 (D 03) 350 br (5076 PSI) 80 L/min (2 GPM) Replces 2/2007 /3-, /2- wy directionl control vlves Enclosure type to IP65 Push button

More information

Installation and Operational Instructions for ROBA -slip hubs Sizes 0 12 (B.1.0.GB)

Installation and Operational Instructions for ROBA -slip hubs Sizes 0 12 (B.1.0.GB) Plese red these Opertionl Instructions crefully nd follow them ccordingly! Ignoring these Instructions my led to mlfunctions or to clutch filure, resulting in dmge to other prts. These Instlltion nd Opertionl

More information

Roller and ball bars for easy and safe die change

Roller and ball bars for easy and safe die change Roller nd bll brs for esy nd sfe die chnge T-slot tolernces cc. to DIN 6 b c h n min. mx. mx. 8 H8 + +,6 H8 37 +3 +,6 8 H8 +4 0 + 48 56,6 H8 56 +4 5 +3 6 7,5 Dimensions in mm h min. = smllest dimension

More information

RPE3-06. Functional Description HA /2008. Solenoid Operated Directional Control Valves. Replaces HA /2006

RPE3-06. Functional Description HA /2008. Solenoid Operated Directional Control Valves. Replaces HA /2006 Solenoid Operted Directionl Control Vlves RE3-06 10/2008 Size 06 p mx up to 320 br Q mx up to 80 L/min Replces 11/2006 4/3, 4/2 wy directionl control vlves Solenoids cn be turned round their xis to ny

More information

4/2- and 4/3-way shut-off valve

4/2- and 4/3-way shut-off valve Courtesy of CMA/Flodyne/Hydrdyne Motion Control Hydrulic Pneumtic Electricl Mechnicl (00) 426-540 www.cmfh.com 4/2- nd 4/3-wy shut-off vlve Type Z4WE Size 6 Component series 3X Mximum operting pressure

More information

4/2- and 4/3-directional spool valve solenoid-operated, direct-acting 4WE 6

4/2- and 4/3-directional spool valve solenoid-operated, direct-acting 4WE 6 4/2- nd 4/3-directionl spool vlve solenoid-operted, direct-cting 4WE 6 DESCRIION HYDC 4/2- nd 4/3- directionl spool vlves of the 4WE 6 series re directionl vlves for oil hydrulic systems which re used

More information

Proportional directional valves

Proportional directional valves /4 Proportionl directionl vlves 6.9 Type 4WRE nd 4WREE NG 6 nd p to r p to 8 L/min Contents Function nd configurtion Symols Ordering code Technicl dt 4 Electricl connections, plug-in connectors Integrted

More information

Series 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve

Series 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve Series 250 Type 3251-1 nd Type 3251-7 Pneumtic Control Vlves Type 3251 Globe Vlve DIN version Appliction Control vlve for process engineering pplictions with high industril requirements Nominl size DN

More information

Technical Data Concept and System 25/280

Technical Data Concept and System 25/280 Technical Data Concept and System 25/ Demag Plastics Group Concept and System 25/ Model description 25/-35 25/-80 25/-120 International size description 250-35 250-80 250-120 Clamping unit 25/ Clamping

More information

2/2 Solenoid Operated Seat Valve, ISO Size 03

2/2 Solenoid Operated Seat Valve, ISO Size 03 2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, electriclly operted 1 Description 2 echnicl dt

More information

Push-in RTD temperature probe for heat meters with connecting cable for thermowells (type PS/PL)

Push-in RTD temperature probe for heat meters with connecting cable for thermowells (type PS/PL) elivery ddress: Mckenrodtstrße 14 36039 Fuld, Germny Postl ddress: 36035 Fuld, Germny Fx: +49 661 6003-607 Emil: mil@jumo.net Temple Bnk, Riverwy Hrlow, Essex, CM20 2Y, UK Fx: +44 1279 62 50 29 Emil: sles@jumo.co.uk

More information

4/3, 4/2 and 3/2 explosion-proof solenoid directional valve

4/3, 4/2 and 3/2 explosion-proof solenoid directional valve 01/06 4/3, 4/2 nd 3/2 explosion-proof solenoid directionl vlve Type G...WE6...L6X 2.21 Size (NG) 6 Up to 350 br Up to 80 L/min Contents Function nd configurtion Specifictions 03 Spool symbols 03 Technicl

More information

JUMO MIDAS S05 OEM pressure transmitter - universal

JUMO MIDAS S05 OEM pressure transmitter - universal Delivery ddress: Mckenrodtstrße 4 609 Fuld, Germny Postl ddress: 605 Fuld, Germny Phone: +49 66 600-0 Fx: +49 66 600-607 Hrlow, Essex CM0 DY, UK Phone: +44 79 655 Fx: +44 79 656 Cnstot, NY 0, USA Phone:

More information

Hot Air Thermostats. WTHc series. Special features. Brief description. Switching function. Approval/approval marks (see "Technical data")

Hot Air Thermostats. WTHc series. Special features. Brief description. Switching function. Approval/approval marks (see Technical data) Delivery ddress: Mckenrodtstrße 36039 Fuld, Germny Postl ddress: 36035 Fuld, Germny Phone: +9 66 6003-0 Fx: +9 66 6003-607 E-mil: mil@jumo.net Temple Bnk, Riverwy Hrlow, Essex CM0 DY, UK Phone: + 79 635533

More information

Precision Pressure Transmitter with Switching Contacts and Display. Interface Setup program. Display 4 characters. Switching output 1.

Precision Pressure Transmitter with Switching Contacts and Display. Interface Setup program. Display 4 characters. Switching output 1. Dt sheet 405054 Pge 1/7 JUMO DLOS HP Precision Pressure Trnsmitter with Switching Contcts nd Disply Appliction Hydrulic plnts Mchine nd plnt engineering Test benches Lbortory equipment Brief description

More information

2/2 Solenoid Operated Seat Valve, ISO Size 03

2/2 Solenoid Operated Seat Valve, ISO Size 03 2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 20 l/min (5.3 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, with EX-sfty sol. coil Vlve: With crtridge vlve,

More information

Pneumatic Actuators 1000, 1400, 2800, and 2 x 2800 cm² Type 3271 and Type 3277 for integral positioner attachment Hand-operated Actuator Type 3273

Pneumatic Actuators 1000, 1400, 2800, and 2 x 2800 cm² Type 3271 and Type 3277 for integral positioner attachment Hand-operated Actuator Type 3273 Pneumtic Actutors 000, 400, 2800, nd 2 x 2800 cm² Type 27 nd Type 277 for integrl positioner ttchment nd-operted Actutor Type 27 Appliction Liner ctutor in prticulr for ttchment to Series 240, 250, nd

More information

RPE3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated. Replaces HA /2009

RPE3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated.  Replaces HA /2009 Directionl Control Vlves Solenoid Operted RE3-06 Size D 06 (03) 350 br (5076 SI) 80 L/min(21 GM) Size D 06 (03) p mx 320 br (4641SI) ccording to CSA 80 L/min(21 GM) HA 4010 11/2011 Replces HA 4010 12/2009

More information

2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03

2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03 2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 20 l/min, p mx = 315 r idirectionl set-vlve shut-off, direct cting, electriclly operted 1 Description he W2N / W2 series of 2/2 4/4 solenoid operted

More information

STANDARD AND FULL HEIGHT - REAR LOAD - WITH 40mm (1 16") CEN I, CEN III GAS or CEN IV GAS SAFES

STANDARD AND FULL HEIGHT - REAR LOAD - WITH 40mm (1 16) CEN I, CEN III GAS or CEN IV GAS SAFES L STNDRD ND FULL HEIGHT - RER LOD - WITH 0mm ( 6") "LL DIMENSIONS ND DESIGN CRITERI PGE OF 8 FRONT - STNDRD HEIGHT SEE PGES and FOR CS 00 STNDRD HEIGHT DETILS FRONT - FULL HEIGHT SEE PGES and FOR CS 00

More information

* * * DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CONSUMER ACCESS DIMENSIONS PLAN VIEW 19" DISPLAY FRONT ELEVATION

* * * DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15 DISPLAY OR 19 DISPLAY CONSUMER ACCESS DIMENSIONS PLAN VIEW 19 DISPLAY FRONT ELEVATION R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER- FRONT LOD " DISPLY OR " DISPLY WITH mm ( ") UL SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE

More information

DIEBOLD 3750 CASH RECYCLER TERMINAL. 13mm ( 2") UL SAFE - 15" OR 19" DISPLAY THROUGH THE WALL 330mm (13") PLAN VIEW FRONT ELEVATION SECTION

DIEBOLD 3750 CASH RECYCLER TERMINAL. 13mm ( 2) UL SAFE - 15 OR 19 DISPLAY THROUGH THE WALL 330mm (13) PLAN VIEW FRONT ELEVATION SECTION L8 CLL -800--600 R DIEBOLD 0 CSH RECYCLER TERMINL mm ( ") UL SFE - " OR " DISPLY THROUGH THE WLL 0mm (") 64 SFE ( 6 ") CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE

More information

PREFILL AND EXHAUST VALVE PV 100 TO PV 200

PREFILL AND EXHAUST VALVE PV 100 TO PV 200 PREFILL ND EHUST VLVE Ref. No. Relese 08/2006 1 Description Set type construction. llows free flow from it's port to port. Flow from port to port cn e hd y pplying pilot pressure to it's port. The decompression

More information

JUMO MIDAS C18 SW. OEM seawater pressure transmitter. Applications. Brief description. Customer benefits. Special features. Approvals/approval marks

JUMO MIDAS C18 SW. OEM seawater pressure transmitter. Applications. Brief description. Customer benefits. Special features. Approvals/approval marks Pge /8 JUMO MIDAS C8 SW OEM sewter pressure trnsmitter Applictions wter tretment reverse osmosis, e.g. sewter deslintion plnts purifiction plnts orgnic cids, e.g. cetic cid solutions contining chloride,

More information

ABB industrial drives. Mechanical installation instructions ACS880 multidrive cabinets

ABB industrial drives. Mechanical installation instructions ACS880 multidrive cabinets ABB industril drives Mechnicl instlltion instructions ACS880 multidrive cbinets List of relted mnuls Generl drive mnuls (in ll deliveries) Electricl plnning instructions for ACS880 multidrive cbinets nd

More information

2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03

2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03 2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) idirectionl lek-proof shutoff, direct cting, electriclly operted Series W2N, W2 1 Description With crtridge

More information

DIEBOLD 5550 CASH DISPENSER THROUGH 330mm (13") MAXIMUM WALL PLAN VIEW FRONT ELEVATION SIDE ELEVATION CONSUMER ACCESS DIMENSIONS

DIEBOLD 5550 CASH DISPENSER THROUGH 330mm (13) MAXIMUM WALL PLAN VIEW FRONT ELEVATION SIDE ELEVATION CONSUMER ACCESS DIMENSIONS L0 CLL -800--600 R DIEBOLD 0 CSH DISPENSER THROUGH 0mm (") MXIMUM WLL mm ( " ) UL CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE

More information

Data Sheet T /4/5/6 EN

Data Sheet T /4/5/6 EN Dt heet T 8310-1/4/5/6 EN Pneumtic Actutors up to 750v2 cm² Type 3271 Type 3277 for integrl positioner ttchment Appliction Liner ctutors prticulrly suitble for ttchment to eries 240, 250, 280 nd 290 Vlves

More information

Electrically operated directional spool valve with a soft-shift function type WE10P NS 10. up to 35 MPa up to 120 DATA SHEET - OPERATION MANUAL

Electrically operated directional spool valve with a soft-shift function type WE10P NS 10. up to 35 MPa up to 120 DATA SHEET - OPERATION MANUAL LICTION Electriclly operted directionl spool vlve with soft-shift function type WE10 NS 10 Electriclly operted directionl spool vlve type WE10 is intended for chnging the direction of fluid flow in hydrulic

More information

JUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits

JUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits Mckenrodtstrße 4 609 Fuld, Allemgne 605 Fuld, Allemgne Tél. : +49 66 600-0 Fx. : +49 66 600-607 B.P. 4500 57075 Metz Cedex, Frnce Tél. : + 87 7 5 00 Fx. : + 87 7 89 00 Industriestrße 8 4700 Eupen, Belgique

More information

* * * 3700 LOBBY CASH RECYCLER. REAR LOAD 13mm ( 2") UL SAFE - 15" DISPLAY OR 19" DISPLAY WITH DETAILS FOR OPTIONAL VESTIBULE INSTALLATION

* * * 3700 LOBBY CASH RECYCLER. REAR LOAD 13mm ( 2) UL SAFE - 15 DISPLAY OR 19 DISPLAY WITH DETAILS FOR OPTIONAL VESTIBULE INSTALLATION R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER RER LOD mm ( ") UL SFE - " DISPLY OR " DISPLY WITH DETILS FOR OPTIONL VESTIBULE INSTLLTION CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR

More information

SEE PAGES 3 AND 4 OF 7 FOR 3700 CASH RECYCLER THROUGH THE WALL WITH VESTIBULE TRIM KIT REFERENCE FRONT EDGE OF BEZEL FOR DEPTH DIMENSIONS

SEE PAGES 3 AND 4 OF 7 FOR 3700 CASH RECYCLER THROUGH THE WALL WITH VESTIBULE TRIM KIT REFERENCE FRONT EDGE OF BEZEL FOR DEPTH DIMENSIONS R DIEBOLD 00 LOBBY CSH RECYCLER- RER LOD L2 CLL -0--600 64 SFE (2 6 ") 40mm ( 6") CEN I SFE - " DISPLY OR " DISPLY WITH DETILS FOR OPTIONL VESTIBULE INSTLLTION CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH

More information

Compact Design. Geislinger

Compact Design. Geislinger Compct Design Geislinger SAE-Coupling he technology behind the Geislinger steel spring coupling with its extrordinry relibility hs been proven for more thn 50 yers. his successful design hs now been further

More information

Boiler room components 0861EN April 2017 Distribution and regulation units

Boiler room components 0861EN April 2017 Distribution and regulation units oiler room components 8EN pril Distriution nd regultion units R8R R8RY R8RY R8RY R8RY Unit with insultion nd ctutor (optionl) R8RY R8RY R8RY R8RY Description R8R distriution units control heting nd cooling

More information

SHEET 1 OF 6

SHEET 1 OF 6 REVISIONS REV DESCRIPTION CHG.NO. PP'D DTE SENSOR WELD NECK MOUNTING FLNGE & WELD FTG. (FCTORY WELDED) VILBLE IN SME B16.5 RF & RTJ, ND EN 1092-1 RF. REFER TO TBLE 1 ON SHEET 2 OR FOR S ND DIMENSIONS NEW

More information

DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CEN I, CEN III GAS, CEN IV GAS or CEN IV GAS EX SAFES

DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15 DISPLAY OR 19 DISPLAY CEN I, CEN III GAS, CEN IV GAS or CEN IV GAS EX SAFES R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER- FRONT LOD " DISPLY OR " DISPLY CEN I, CEN III GS, CEN IV GS or CEN IV GS EX SFES CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL

More information

Cable Trolleys for C-Rails Program

Cable Trolleys for C-Rails Program Cble Trolleys for C-Rils Progrm 02 0 0260 Contents C-Ril nd Accessories Progrm 02 C-Ril x... 2 Trck Coupler... 2 End Stop... 2 Trck Support Brcket... 2 Support Arm nd Girder Clip... 3 Brcket... 3 Cble

More information

Press control block PSB Type approved according to DIN EN 693

Press control block PSB Type approved according to DIN EN 693 Press control lock PS Type pproved ccording to DIN EN 693 Description The press control locks PS in the nominl sizes 06 nd 0 re modulr control locks with EC type pprovl for use in hydrulic presses ccording

More information

330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT (2) EACH SIDE OF SAFE CEN I SAFE ONLY

330mm (13) MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13) MAXIMUM WALL THICKNESS IN AREA OF UNIT (2) EACH SIDE OF SAFE CEN I SAFE ONLY L08 CLL -800--600 R CS 0 FULL FUNCTION TERMINL " OR " DISPLY - THROUGH THE WLL 0mm (") 40mm ( 6") CEN I, CEN III GS OR CEN IV GS SFES SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS

More information

203mm (8") MAXIMUM WALL THICKNESS IN AREA OF UNIT NOTE: 203mm (8") MAXIMUM WALL THICKNESS IN AREA OF UNIT (2) EACH SIDE OF SAFE CEN I SAFE ONLY

203mm (8) MAXIMUM WALL THICKNESS IN AREA OF UNIT NOTE: 203mm (8) MAXIMUM WALL THICKNESS IN AREA OF UNIT (2) EACH SIDE OF SAFE CEN I SAFE ONLY L0 CLL -800--600 R CS 0 FULL FUNCTION VESTIBULE TERMINL " OR " DISPLY-THROUGH 0mm ( MXIMUM WLL 40mm ( 6") CEN I, CEN III GS or CEN IV GS SFES SFE ( 6 ") CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR

More information

Solenoid Pilot Operated Directional Control Valve

Solenoid Pilot Operated Directional Control Valve Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl

More information

3700 LOBBY CASH RECYCLER. REAR LOAD 13mm ( 2") UL SAFE - 15" DISPLAY OR 19" DISPLAY WITH DETAILS FOR OPTIONAL VESTIBULE INSTALLATION

3700 LOBBY CASH RECYCLER. REAR LOAD 13mm ( 2) UL SAFE - 15 DISPLAY OR 19 DISPLAY WITH DETAILS FOR OPTIONAL VESTIBULE INSTALLATION R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER RER LOD mm ( ") UL SFE - " DISPLY OR " DISPLY WITH DETILS FOR OPTIONL VESTIBULE INSTLLTION CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR

More information

3/3, 4/2 and 4/3 directional poppet valve with solenoid actuation

3/3, 4/2 and 4/3 directional poppet valve with solenoid actuation 3/3, 4/2 nd 4/3 directionl poppet vlve with solenoid ctution RE 22035/06.10 Replces: 12.08 1/16 Type SEC Size 6 Component series 1X Mximum operting pressure 420 r [6100 psi] Mximum flow 25 l/min [6.6 US

More information

The widest range to provide the optimum tailor made solutions to your fume and gas extraction needs.

The widest range to provide the optimum tailor made solutions to your fume and gas extraction needs. FUME XTRACTION ARMS Improving your workspce Chemicl resistnt Antisttic Stndrd FX ARMS The widest rnge to provide the optimum tilor mde solutions to your fume nd gs extrction needs. Avilble in Stndrd, Antisttic

More information

2/2, 3/2 and 4/2 directional poppet valve with solenoid actuation

2/2, 3/2 and 4/2 directional poppet valve with solenoid actuation 0/0 /, / nd / directionl poppet vlve with solenoid ctution.7 Type M-.SEW...LX Size Up to 0 r Up to 0 L/min Contents Function nd configurtion Symols 0 Specifiction 0 Technicl dt 0 Electricl dt 0 Chrcteristic

More information

Accessories. Inlet nozzles 550. Guard grilles 553. Lead connections, capacitors 558. Terminal boxes, air filters 562

Accessories. Inlet nozzles 550. Guard grilles 553. Lead connections, capacitors 558. Terminal boxes, air filters 562 Accessories Generl informtion Inlet nozzles 550 Gurd grilles 553 Led connections, cpcitors 558 Terminl boxes, ir filters 562 Speed setting, motor protection switch, third-prty ccessories 564 Technology

More information

JUMO dtrans T06 Multifunctional Four-Wire Transmitter in Mounting Rail Case in Accordance with DIN EN and EN ISO 13849

JUMO dtrans T06 Multifunctional Four-Wire Transmitter in Mounting Rail Case in Accordance with DIN EN and EN ISO 13849 Dt sheet 777 Pge / JUMO dtrans T6 Multifunctionl Four-Wire Trnsmitter in Mounting Ril Cse in Accordnce with DIN EN 658 nd EN ISO 3849 Brief description The trnsmitter cquires the temperture through n RTD

More information

Brazed heat exchanger XB

Brazed heat exchanger XB Description The XB is rnge of copper rzed plte het exchngers for use in District Heting (DH) nd District Cooling (DC) pplictions, e.g. domestic hot wter production, district heting susttion to seprte the

More information

Mechanical Fail-Safe Damper Actuator NFA

Mechanical Fail-Safe Damper Actuator NFA 2-FON echnicl Fil-Sfe Dmper Actutor NFA ctutor emergency function for djusting ir dmpers in ventiltion nd ir conditioning systems in uildings orque Nm Nominl voltge AC 24..4V / DC 24..V Control: Open-close

More information

RPEL1-04. Functional Description HA /2014. Solenoid - Operated Directional Control Valves. Size 04 (D 02) 250 bar (3600 PSI) 30 l/min (8.

RPEL1-04. Functional Description HA /2014. Solenoid - Operated Directional Control Valves. Size 04 (D 02) 250 bar (3600 PSI) 30 l/min (8. Solenoid - Operted Directionl Control Vlves RPEL-0 05/0 Size 0 (D 0) 50 r (600 PSI) 0 l/min (8.0 GPM) /-, /- nd /-wy directionl control vlves with solenoid control Solenoids cn e turned round their xis

More information

OPTIONAL 178mm (7") SPACER AVAILABLE FOR WALL THICKNESSES UP TO 152mm (6") 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT

OPTIONAL 178mm (7) SPACER AVAILABLE FOR WALL THICKNESSES UP TO 152mm (6) 330mm (13) MAXIMUM WALL THICKNESS IN AREA OF UNIT L88 CLL -0--600 R DIEBOLD 0 CSH RECYCLER WITH COIN 40mm ( 6") CEN I, CEN III GS or CEN IV GS SFES THROUGH 0mm (") MXIMUM WLL 64 SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND

More information

Directional Valve. NG 04 WL4.04 Installation dimensions ISO 4401/ DIN A4

Directional Valve. NG 04 WL4.04 Installation dimensions ISO 4401/ DIN A4 Directionl Vlve NG 04 WL4.04 Instlltion dimensions ISO 4401/ DIN 4340 4 Functionl Description he directionl control vlves WL 4/04 consists of housing (1), control spool (5) with two centering springs (4)

More information

SMP-BC Mixproof Valve

SMP-BC Mixproof Valve . kythe Proven Mixproof Rnge SMP-BC Mixproof Vlve Concept SMP-BC is snitry pneumtic set vlve, designed for sfety nd lek detection when two different products flow through only one vlve. The vlve is often

More information

DIEBOLD IN LOBBY TELLER (ILT) PORTRAIT OR LANDSCAPE INSTALLED WITH A COIN RECYCLER SIDE CAR PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 7

DIEBOLD IN LOBBY TELLER (ILT) PORTRAIT OR LANDSCAPE INSTALLED WITH A COIN RECYCLER SIDE CAR PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 7 L2 CLL -800--600 TP-826-00. R CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE DIEBOLD 00 - IN LOBBY TELLER (ILT) PORTRIT OR LNDSCPE

More information