RECOMMENDED PARAMETERS FOR ROUTING FR4
|
|
|
- Ruby Sherman
- 5 years ago
- Views:
Transcription
1 MULTILAYER ULTRA MICRO DRILL D840 D : Ø 1/8" (3.15 ) Coon Shnk On Request Shnk Di On request : Inch sizes / Speci imensions : Non stock items / Artices Point Ange FOR ROUTING FR4 MATERIAL : FR4 MLB 8 yers CHIP LOAD 110,000 MAX. 1,000 MAX. 150,000 MAX. 180,000 MAX. RETRACT SPINDLE SPEED IN SPINDLE SPEED IN SPINDLE SPEED IN SPINDLE SPEED IN Tbute prmeters provie guieines which cts s strting points for optimising spees n fees t the user's en. Driing of sm through hoes in mutiyer bors. Efficient chip remov by optimize geometry. Exceent hoe w quity 10 toos per pck. 50 toos per pck. High position ccurcy.
2 MULTILAYER SUPER MICRO DRILL D840 D : Ø 1/8" (3.15 ) Coon Shnk On Request Shnk Di On request : Inch sizes / Speci imensions : Non stock items / Artices Point Ange FOR ROUTING FR4 MATERIAL : FR4 MLB 8 yers CHIP LOAD 110,000 MAX. 1,000 MAX. 150,000 MAX. 180,000 MAX. RETRACT SPINDLE SPEED IN SPINDLE SPEED IN SPINDLE SPEED IN SPINDLE SPEED IN Tbute prmeters provie guieines which cts s strting points for optimising spees n fees t the user's en. Driing of sm through hoes in mutiyer bors. Efficient chip remov by optimize geometry. Exceent hoe w quity. 10 toos per pck. 50 toos per pck. High position ccurcy.
3 MULTILAYER DRILL D840 D : Ø 1/8" (3.15 ) Coon Shnk On Request Shnk Di 3 Ø 0. Ø 0 Ø 5 Ø On request : Inch sizes / Speci imensions : Non stock items / Artices Point Ange Ø 0. Point Ange Ø MATERIAL : FR4 MLB 8 yers CHIP LOAD 110,000 MAX. 1,000 MAX. 150,000 MAX. 180,000 MAX. RETRACT SPINDLE SPEED IN SPINDLE SPEED IN SPINDLE SPEED IN SPINDLE SPEED IN Tbute prmeters provie guieines which cts s strting points for optimising spees n fees t the user's en. Driing of sm through hoes in mutiyer bors. Efficient chip remov by optimize geometry. Exceent hoe w quity. 10 toos per pck. 50 toos per pck. High position ccurcy.
4 MICRO DRILL D835 D : Ø 1/8" (3.15 ) Coon Shnk On Request Shnk Di 3 Ø 0. Ø Ø 5 Ø On request : Inch sizes / Speci imensions : Non stock items / Artices Point Ange Ø 0. Point Ange Ø CHIP LOAD 1,000 MAX. 150,000 MAX. 180,000 MAX. RETRACT SPINDLE SPEED RATE SPINDLE SPEED RATE SPINDLE SPEED RATE Tbute prmeters provie guieines which cts s strting points for optimising spees n fees t the user's en. Driing of sm hoes with high position ccurcy. Driing of sm through hoes n vi hoes. Exceent hoe w quity. High Position ccurcy. Efficient chip remov. 10 toos per pck. 50 toos per pck.
5 STANDARD DRILL D835 D : Ø 1/8" (3.15 ) Coon Shnk On Request Shnk Di On request : Inch sizes / Speci imensions : Non stock items / Artices Point Ange MATERIAL : FR4 MLB 8 yers SPINDLE SPEED RATE CHIP LOAD RETRACTION µm /rev Tbute prmeters provie guieines which cts s strting points for optimising spees n fees t the user's en. For stnr PCBs. Exceent hoe w quity. High position ccurcy. 10 toos per pck. 50 toos per pck. Efficient chip remov.
6 MULTILAYER UNDERCUT DRILL D6 D : Ø 1/8" (3.15 ) Coon Shnk On Request Shnk Di * 0. * 0. * * * * * 0 On request : Inch sizes / Speci imensions : Non stock items / Artices Unercut PointAnge Ø0.15 Ø0. Point Ange Ø0. Ø MATERIAL : FR4 MLB 8 yers CHIP LOAD 110,000 MAX. 1,000 MAX. 150,000 MAX. RETRACT SPINDLE SPEED IN SPINDLE SPEED IN SPINDLE SPEED IN Tbute prmeters provie guieines which cts s strting points for optimising spees n fees t the user's en. Driing of high yer bors / thick pnes. Efficient chip remov by optimize geometry. Exceent hoe w quity. High position ccurcy. Better vibrtion mping. Better het issiption. 10 toos per pck. 50 toos per pck.
7 MULTILAYER UNDERCUT DRILL D645 D : Ø 1/8" (3.15 ) Coon Shnk On Request Shnk Di On request : Inch sizes / Speci imensions : Non stock items / Artices Unercut Point Ange MATERIAL : FR4 MLB 8 yers CHIP LOAD 110,000 MAX. 1,000 MAX. 150,000 MAX. RETRACT SPINDLE SPEED IN SPINDLE SPEED IN SPINDLE SPEED IN Tbute prmeters provie guieines which cts s strting points for optimising spees n fees t the user's en. High performnce riing of mutiyer bors. High emn on too evition. High stck. BT mteri / BGA mteri. Efficient chip remov by optimize geometry. Exceent hoe w quity. High position ccurcy. Better vibrtion mping Better het issiption. 10 toos per pck. 50 toos per pck.
8 SLOT DRILL D546 D : Ø 1/8" (3.15 ) Coon Shnk On Request Shnk Di 3 * On request : Inch sizes / Speci imensions : Non stock items / Artices Unercut Point Ange 150 MATERIAL : FR4 MLB 8 yers CUTTING SPEED : CHIP LOAD ,000 MAX. RETRACT SPINDLE SPEED IN CHIP LOAD ,000 MAX. RETRACT SPINDLE SPEED IN Tbute prmeters provie guieines which cts s strting points for optimising spees n fees t the user's en. For mking sots in PCBs. Better imension contro. Reuce evition. Reuce brekges. Improve sot finish. 10 toos per pck. 50 toos per pck.
9 UNDERCUT DRILL D635 D : Ø 1/8" (3.15 ) Coon Shnk On Request Shnk Di * * Ø 0. Ø Ø 0 Ø 0 On request : Inch sizes / Speci imensions : Non stock items / Artices Unercut Point Ange Ø 0. Point Ange Ø MATERIAL : FR4 MLB 6 yers CHIP LOAD 110,000 MAX. 1,000 MAX. 150,000 MAX. RETRACT SPINDLE SPEED IN SPINDLE SPEED IN SPINDLE SPEED IN Tbute prmeters provie guieines which cts s strting points for optimising spees n fees t the user's en. Driing of high quity mutiyer bors. Efficient chip remov by optimize geometry. Exceent hoe w quity. High position ccurcy. Better vibrtion mping. Better het issiption. 10 toos per pck. 50 toos per pck.
10 INVERSE DRILL D532 D534 D835 D : Ø 1/8" (3.15 ) Coon Shnk On Request Shnk Di Ø Ø Ø High Performnce C.B Inverse Dri D532 High Performnce Inverse Dri D534 Stnr Inverse Dri D On request : Inch sizes / Speci imensions : Non stock items / Artices Prevent bir nesting n copper coiing. Efficient chip remov. High position ccurcy. Higher proucitivity. Efficient chip remov. Higher position ccurcy. Higher process ssurnce. Higher prouctivity. Less evition. Lrger chip remov re. Higher prouctivity. SPINDLE SPEED IN CHIP LOAD RETRACT IPM mi IPM Tbute prmeters provie guieines which cts s strting points for optimising spees n fees t the user's en. ALSO AVAILABLE Driing of mounting n supporting hoes in stnr PCBs. Especiy suitbe for riing high Tg bors. D5341D Dimon cote ri for IMS, Copper, Auminium, Gss, Cermic, Qurtz & high Tg mteris 0 C. toos per pck. 50 toos per pck. www. insphinx.com
Sumitomo Electric Carbide, Inc. DFC Milling Cutter Series
CAT.FCBROCHURE.3/18 Sumitomo Eectric Cride, Inc. FC Miing Cutter Series GS Chipreker Expnsion Improved chip contro for shouder miing High Efficiency, 90 Miing Cutter High Performnce oue-sided 6 Edge Inserts
B 220. B Compact FA PSS Type
-3-2.1 ompct PSS ype eetures In orer to respon quicky to wie rnge of nees, NSK keeps en-efector recircution system screws, which offer high-spee n ow-noise opertion n compct esign, in stnr stock s the
Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides -
CARBIDE ENDMILLS Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides - Various shank styles to suit your needs
EX-(SUS) SERIES. TiN-coated HSSE precision drills EX-SUS-GDS EX-SUS-GDR EX-GDS EX-GDR
EX-(U) ERIE TiN-coate HE precision ris EX-U-G EX-U-GR EX-G EX-GR X Key features: EX-U eries EX-U-GR 485 sizes increments of 0.01 from 2.0-6.0mm EX-U-G Wie variety of in-between sizes 635 sizes, increments
Internal Turning, Profiling, Grooving & Face Machining of Small Diameters
Internl Turning, Proiling, Grooving & Fce Mchining o Smll Dimeters Insert Styles/ Applictions: MINT... Turning/Chmering MINP... Turning/Proiling MINC... Turning/45º Chmering MING... Grooving MINF... Deep
Automotive. Breakdown voltage. Type = Popular type (Picture scale: DIN A4) Max. switching voltage. Switching current (Min.
Coil Breakdown s to coil PCB relays CT Single:17. x 7.2 x 13.5mm Twin:17. x 1 x 13.5mm Super miniature size ACT512 layout = layout of 2 x ACT112 H-bridge type (twin Quiet operation (N.O.) (N.C.) 1c, 8mW
Short-stroke cylinder, Series KHZ Ports: M5 - G 1/4 Single-acting, retracted without pressure Cushioning: elastic Piston rod: Internal thread
: - G 1/4 Single-acting, retracted without pressure Cushioning: elastic Piston rod: Internal 1 Compressed air connection Internal Ambient temperature min./max. -25 C / +80 C Medium temperature min./max.
4 cutting edges. Diameter range Ø Ø41 Hardened protection against chip abrasion extends tool life
DRILLING DRILLING INDEXABLE DRILLING Multi-Mat TM indexable drilling solutions for general drilling in a variety of materials. SPMG Multi-Mat TM drilling inserts are designed with optimized grade and geometry
HIGH SPEED HIGH PERFORMANCE MACHINING VERTICAL CENTER
HIGH SPEED HIGH PERFORMANCE MACHINING VERTICAL CENTER Micro-drill HIGH SPEED HIGH PERFORMANCE MACHINING VERTICAL CENTER The YEONG CHIN FV-Series High-Speed, High-Power Vertical Machining Centers are specially
Super. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY
Super Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY 10th Edition High-tech tools at a super price convincing price-performance-ratio exceptional quality immediate availability customer-friendly service
Threadmill Nomenclature TMR N L ISO C
Threami Nomencature 1 2 3 4 5 6 7 8 TMR N 16 139 40 2.5 ISO C 1 - ine TMR - Heica Futes MR - Heica Futes TMS - Straight Futes 2 - Too Type 3 E - Externa Threa N - Interna Threa X - Externa an Interna 3
HSS-Drills. HSS-DrillS
-Dris -DriS Center dris Cutting direction Too materia Standard Diameter range (mm) Cataog no. Discount group Standard range, page Center dris without fat DIN 333 0,500-12,500 71600 132 367 eft-hand DIN
Mini Mill-Thread (cont d) Mill-Thread Solid Carbide. Mill-Thread Solid Carbide for Threading and Grooving Deep Parts. Mini Chamfer Tools 34
Metric recision Toos t. CONTENTS Mi-Threa Soi Carbie rouct entification with cooant bore with interna cooant through the futes G ( ) G ( ) with interna cooant through the futes Whitworth with interna cooant
L11 Fused and Non-Fused Disconnect Switches (30 & 60A) Dimensions are in millimeters (inches). Dimensions not intended for manufacturing purposes.
Series 11 used and Non-used isconnect Switches (30 & 60A) W A E H imension Approximate imensions in mm (in) Reference H W A ➊ E ➊ A1 108 (4-1/4) 120 (4-3/4) 101 (4) 90 (3-9/16) 105 (4-1/8) 85 (3-11/32)
GStype/HGStype/WGStype
Tooing News No.E473 Achieving Stabe And Long Too Life With Exceent Chip Evacuation Super MutiDri GStype/HGStype/WGStype 2009-015 series series New J fute Design Achieves Exceent Chip Contro And Stabe Driing
PRODUCT INFORMATION VOL. III A-TAP SERIES A-SFT A-OIL-SFT A-POT
PRODUCT INFORATION A-TAP SERIES A-SFT A-OI-SFT A-POT O. III OSG's new premium brn "A-TAP Series" The nswer for your troubes ies here ost of tpping troubes re cuse by unstbe chip evcution. A-TAP Series
Adapting Press-Fit Connection Technology for Electronic Modules in Harsh Environments.
Adapting Press-Fit Connection Technology for Electronic Modules in Harsh Environments. By Joseph Lynch Director of Advanced Product Engineering Interplex Industries Inc, USA. Andy Longford Consultant PandA
Gennaio TiN-coated HSSE precision drills EX-(SUS) SERIES EX-SUS-GDS EX-SUS-GDR EX-GDS EX-GDR
TiN-coate HE precision ris EX-(U) ERIE EX-U-G EX-U-GR EX-G EX-GR Gennaio 2017 Key features: EX-U eries EX-U-GR 485 sizes increments of 0.01 from 2.0-6.0mm EX-U-G Wie variety of in-between sizes 635 sizes,
Center drills. Center drills without flat din 333. Center drills without flat din 333. Catalogue no. Catalogue no. Tool material
Center dris Center dris without fat din 333 Cataogue 71600 Standard dri for producing centre hoes acc. to din 332, Sheet 1, form a (without protecting chamfer). Center dris with Ø 0.5 and 0.8 mm are ony
HIGH EFFICIENCY VERTICAL MACHINING CENTER
HIGH EFFICIENCY VERTICAL MACHINING CENTER 1 HIGH EFFICIENCY VERTICAL MACHINING CENTER FACE MILL S45C Steel Material Removal Rate 138cc/min. EV1020A is built with state-of-the-art technology in mind and
P: F:
TLOG GUIDE rand new product offerings. Visit our website at www.coolantfedtooling.com for technical information and our latest product offerings. Expanded offering of an existing product line in either
(mω) 1. Temperature ( C) Voltage (V) ULRG1 /
Resistors Metl Strip Current Sense Resistors Surfce Mount Metl Element Current Metl Element Sense Resistor UR Series UR Current Series Sense Resistor Mke Possible Resistnce R0005 (m ) to R015 (15m ) Metl
On Aluminum. we have an edge! Aluminum. 3-Flute Series for. Get maximum return on performance with Dura-Mill s FEATURES
On Aluminum we have an ege! Get maximum return on performance with Dura-Mill s 3-Flute Series for Aluminum U.S. Patent 6,899,494 FEATURES Proven an patente WhisperKut Design ensures stability an chatterfree
Manual Applications. Tapping attachments for manual tapping application.
Manual Applications Tapping attachments for manual tapping application RX Newest series for high prouction with heavy uty ball clutch. Tapping attachments for rilling an milling machines an pneumatic,
Drilling Depth ( L / D) Content
Micro Long Drill General Features Micro Long Drills are oil-hole drills for high efficiency drilling that were developed for drilling deep, small-diameter holes. These next-generation, small-diameter hole
KLINGER KVN. Piston valves DN (1/2" 8")
KINGER Piston valves 15 200 (1/2" 8") www.klinger.kfc.at KINGER The original, tried and tested a million times over PROUCT VNTGES» ow maintenance» Relialy tight in the ore and to atmosphere in accordance
HIGH PERFORMANCE HOLE MAKING APPLICATIONS DIJET DRILL SERIES HOLE MAKING SERIES CATALOG NO DIJET INCORPORATED
HOE MAKING SERIES CATAOG NO. 000 HIGH PERFORMANCE HOE MAKING APPICATIONS IJET RI SERIES IJET INCORPORATE www.ijetusa.com Inexable S-Cut 40º Specifications - rilling epth 3x iameter PARTS l l Screw Wrench
SEK Solder board connectors
Solder board connectors Technical characteristics 6, 10, 14, 16, 20, 26, 30*, 34, 40, 50, 60, 64 Contact arrangement straight, angled Contact length 2.9 mm, 4.5 mm Approvals IEC 603-13 DIN EN 60 603-13
Threadmill Nomenclature TR N L ISO C
Threami Nomencature 1 2 3 4 5 6 7 8 TR N 16 139 40 2.5 ISO C 1 - ine TR - Heica Futes TS - Straight Futes 2 - Too Type 3 E N - Externa Threa - Interna Threa 3 - Too Shank ia. 04-4.0 mm 06-6.0 mm 08-8.0
Looking for a gas spring replacement...
Welcome to... ooking for a gas spring replacement... For over 40 years ACE has been successfully manufacturing and supplying a wide range of motion control products. Industrial gas springs have always
Premium quality cutting tools. Super Drills. Gold Drills
Premium quaity cutting toos Super Dris God Dris Super Dris (Precision driing on hard materia) ØD h8 ±3 o SPLIT 1 o POINT L1 HELIX ANGLE L APPLICATION : Driing aoy stee up to 28-35 HRc. Suitabe for driing
Free Machining Austenitic Ferritic + Martensitic Pure Titanium Titanium Alloys Stainless Steels Stainless Steels <950N/mm 2
& - Tps For Stinless Steels These top qulity Tps re mde in Switzerlnd, by DC-Swiss, one of the leding Tp Mnufcturers in Europe. All the Tps re mde of - (Powder Metl). This mteril hs proven to be the best
Omslag. Main Catalogue EN
Omslag Main Catalogue EN We reserve the right to moify any specification an/or item shown in the present catalogue without notice. Information, photos, rawings an technical ata specifie in the publication
Card Edge GENERAL SPECIFICATIONS
Card Edge GENER SPECIFICTIONS INT MTERIS Plating U/CU File Number: CGE COE: 54453 ECCN: ER99 INTERNTION HRMONIZE COE: MECHNIC : : EECTRIC Operating WV: Current Rating: : ENVIRONMENT Operating Temperature:
Drill - Mill. Tilting Head MH 50V 3ph MH 50G 3ph Features. Can change tool in seconds! Optional Accessories.
MH 50V 3ph 0333-8185 MH 50G 3ph 0333-8180 Heavy, sturdy & soid coumns made of premium cast materia with ground and shaven dovetai guide for exceent stabiity and precision Cockwise/Anti-cockwise rotation
High Performance Repairable Pneumatic Cylinder Parker Hannifin Corporation
High Performance Repairable Pneumatic Cylinder 219 Pneumatic ivision eatures Optional Piston Magnet Located under wear band, piston magnet is used for through-thebarrel sensors for electronic piston position
Extremely small dimensions, extremely high precision.
Product innovations Edition 2011-1 Drilling and threading _TOOL INNOVATIONS IN DRILLING Extremely small dimensions, extremely high precision. SOLID CARBIDE DRILLS Walter Titex X treme the universal high-performance
DRILLS CARBIDE. Drills Carbide When productivity matters - 3xd 1
Drills Carbide When productivity matters - 3xd 1 to 12xd 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings DRILL CARBIDE Drills
Introduction 3. Motorized Milling, Drilling and Tapping Spindles 5. Motorized Grinding Spindles 6. Motorized Air Bearing Spindles 8
High Spindles 344 Bloor Street W, Suite 607, Toronto, ON Canada M5S 3A7 www.lprglobal.com www.uskoreahotlink.com Tel.: +1 416-423-5590 E-Mail: info@lprglobal.com Contents Introduction 3 Motorized Milling,
Hydraulic notching machines
Notching & punching Hydrauic notching machines MRA Manua pipe notcher XXFor notching pipes up to 4.5 mm wa thickness XXUp to three pipe diameters can e notched (MRA 2) XXCan e used oth horizontay and verticay
Quality HSS (EW 9 Co 10 - cobalt 10%). Ø x l mm 16 x x x x x
Engrver's points Tool holder its Cutting-Off nd Grooving Tools 1812-1816 Engrver's Points With rough-ground profile. For use on tempered nd chrome-nickel steel. For engrving lettering, profiling for contours,
Motor Driver PCB Layout Guidelines. Application Note
AN124 Motor Driver PCB Layout Guidelines Motor Driver PCB Layout Guidelines Application Note Prepared by Pete Millett August 2017 ABSTRACT Motor driver ICs are able to deliver large amounts of current
BU10P with through coolant supply
GROOVING and BORING TOOLOLER BU with through coolant supply epth of groove up to Width of groove up to.354.118.118 Material of shank: Carbide - Giving a good vibration resistance for use with Insert Part
SMD type. SEC-MultiDrills. The Ultimate in Low Cost Drilling
Tooling News No.E435 The Ultimate in Low Cost ing SEC-s MB Utilizing DEX Coat, a dedicated coating developed for drills, to achieve more than double the tool life of conventional drills Head Different
ANGLE JET (Angle Head Holder)
ANGE JET (Angle Head Holder) BT -AGCT-RSC - D HSA -AGCT-RSC - D With the new mechanism "the coolant unit ", the thru-the-coolant from the spindle can be supplied directly to the cutting edge. FEATURES
CNC gantry-type machining center. PSD-Mill CNC
gantry-type machining center PS-Mill T e c h n i c a l a t a s h e e t xtremely robust and solid base frame provides great rigidity, stability and vibration-free work even with heavy duty cutting Rigid
QP-L Series. High Speed Vertical Machining Center QP1620-L 2033-L 2040-L QP2440-L 2560-L
QP-L Series High Speed Vertical Machining Center QP16-L 33-L 40-L QP2440-L 2560-L QP-L Series High-Speed Vertical Machining Center Engineered for Precision, High Accuracy and Efficiency. Machine Features
EPSM / EPSW. PN Coated End Mills for Machining of Stainless Steels FEATURES. Innovative cutting edge design increases tool life
EPSM / EPSW PN Coated End Mis for Machining of Stainess Stees FEATURES Innovative cutting edge design increases too ife New PN coating exhibits exceent adhesion and wear resistance EPSM: For both roughing
* Please mention "Code Number" upon your order.
BRUSHLESS MOTOR & SPINDLE FOR Series Please mention " Number" upon your orer. '...A PRK25E Ver. E25 SERIES Ultra Precision Excellent urability an high rigiity are obtaine using a highspee brushless motor.
Mining & Construction Tools. Technical Information for Brazed Tools. General Cutting Tools. Rotating Brazing Tools
BRAZED TOOLS Technical Information for 02 KORLOY Ultra-Fine Grades : F-Series 02 Corrosion & Magnetism Proof Grade : IN-Series General Cutting Tools 03 Cemented Carbide, Cermet Blank 04 Square Blank 06
we cut faster Vertical Machining Center MV204II series
we cut faster Vertical Machining Center MV24II series From : October 24 we cut faster Maximum capacity and performance in a very compact working envelope 1 OUTLING MV24II series P & PD models FANUC 18iM-B
CNC swiss and non-swiss. turning center TNL32
CNC swiss and non-swiss turning center TNL32 Thanks to the outstanding technical features of the TRAUB TNL32 CNC swiss and non-swiss turning center, you will notice measurable improvements in production.
Performance LargeSeries
Performance LargeSeries Vertical Machining Centers jyoti.co.in Performance Large Series Vertical Machining Center OVERVIEW VMC Large Series have versatility and capacity to carryout maximum range of jobs,
Pages 2-3 Standard Straight Shank Holder. Pages 8-11 Speed & Feed Chart and Coolant Recommendations
pplication Index,,, 130 High Performance rill Pages 2-3 Standard Straight Shank Holder Pages 14-16,, F, G, H 130 High Performance rill and dapter (sold separately) Pages 4-7 Standard Taper Shank Holder
Drilling Solutions. Solid Carbide Tools. New Expanded Offering VALUE AT THE SPINDLE. High Performance
Solid Carbide Tools Drilling Solutions High Performance VALUE AT THE SPINDLE ISO 9001 Certified Company New Expanded Offering A B1 B2 E D C A HIGH PERFORMANCE FLUTE DESIGN efficiently transports chips
Power Terminals. 316 ept GmbH I Tel. +49 (0) / I Fax +49 (0) / I I
E L E C T R O N I C C O N N E C T O R S Power Terminals 316 ept GmbH I Tel. +49 (0) 88 61 / 25 01 0 I Fax +49 (0) 88 61 / 55 07 I E-Mail sales@ept.de I www.ept.de Contents Introduction 318 Overview 319
Bridging the gap... R40 UNI SPM DRILLS. with carbide drills. for an on-site demonstration contact Sutton Tools on
Bridging the gap... with carbide drills R40 DRILLS for an on-site demonstration contact Sutton Tools on 1800 335 350 100% Australian Owned The 130 four facet point with a web profile grind combined with
PERFORMANCE AND SPECIFICATION. BORING DIAMETER RANGE 1.5 to 24 BORING BAR STROKE 305, 610 or 915mm 12, 24, or 36
MLB610 Line Boring Machine Rev 1.0 Page 1 of 9 DESCRIPTION A versatile and modular line boring machine offering a choice of electric, hydraulic and pneumatic boring bar drive motors, with a mechanical
Online Seminar. LED-PCBs for innovative Lighting Systems. 28. April, Copyright, Haeusermann GmbH, 2015
Online Seminar LED-PCBs for innovative Lighting Systems 28. April, 2015 Copyright, Haeusermann GmbH, 2015 Häusermann GmbH I A-3571 Gars am Kamp I Zitternberg 100 I Tel.: +43 2985 2141-9620 I Fax: +43 2985
w w w. j y o t i. c o. i n Performance Series Vertical Machining Center
w w w. j y o t i. c o. i n Performance Series Vertical Machining Center Performance Series Vertical Machining Center Overview To match the demand of greater accuracy and total reliability at higher speeds
Double Edge Ring Slides & Segments
Double Edge Ring Slides & Segments www. HepcoMotion.com 9 HepcoMotion double edge ring slides are manufactured from high quality steel, zone hardened on the V edges and precision ground all over with datum
CATALOGUE PIPE SUPPORTS
CTOGUE B R T IN SIN C E 1 9 2 4 G 90 YERS ST E RU CE T PIPE SUPPORTS O F PIPE SUPPORTS - PICTORI INEX PIPE SUPPORTS The Unistrut pipe support systems covers an extensive range of hangers, pipe clips, pipe
2016 Unistar Plant Profile
Your Most Reliable Partner Since 2003 Kunshan Unistar Electronics Co., Ltd. 2016 Unistar Plant Profile History 2003 Formed Unistar Electronics, Co., Ltd, Kunshan, China /Register Capital USD$ 60M 2005
Modular Spindle Technology. Productivity Solutions.
Modular Spindle Technology Productivity Solutions Kuvam s Phylosophy: We at Kuvam Technologies believe in win~win~win relationship i.e. Win for the customer, Win for the team and Win for the company. WIN
Series HIGH PERFORMANCE HIGH RIGIDITY VERTICAL MACHINING CENTER
Series HIGH PERFORMANCE HIGH RIGIDITY VERTICAL MACHINING CENTER YCM MV Series The YCM MV Series Vertical Machining Center is the latest developed machine tool for efficient production industries; widely
Angular contact ball bearings
Angulr contct bll berings Contents Angulr contct bll berings 11 Four ifferent esigns 11 Stnr high-precision ngulr contct bll berings 114 High spee high-precision ngulr contct bll berings 114 Hybri high-precision
Tension / Compression tap chucks for tapping cycles that are not synchronized
Tension / Compression tap chucks for tapping cycles that are not synchronize For tapping applications on CNC machines where the revolutions per minute an fee rate are not synchronize to the tap pitch,
ZEPHYR ZT802X POSITIVE FEED DRILL
EPHY G O U P TOOLS ENGINEEED TO PEFOM T802X POSITIVE FEED DILL A 90 DEGEE, MANUALLY OPEATED ANGLE DILL WITH AUTO ETACT AND MINIMUM SPINDLE OFFSET PEMITS USE IN ESTICTED AEAS Specifications ephyr's new
System. Specifications
Kit Part Numbering System WebCode XK1 926 Series 900 = QFP Lead Template 901 = FC176 Flip Chip 902 = FC88 Flip Chip 903 = FC317 Flip Chip 904 = FC220 Flip Chip 905 = CBGA Ceramic Substrates 906 = FC96
REMUS product information VW Golf VI & VW Golf VI Cabrio, type 1K, 2011=> VW Scirocco, type 13, 2008=>
REMUS product information 31-2015 VW Golf VI & VW Golf VI Cabrio, type 1K, 2011=> VW Scirocco, type 13, 2008=> Dear REMUS Partner, We are pleased to inform you that we have completed our next development:
High Frequency Spindles
High Frequency Spindles 344 Bloor Street W, Suite 607, Toronto, ON Canada M5S 3A7 www.lprglobal.com www.uskoreahotlink.com Tel.: +1 416-423-5590 E-Mail: info@lprglobal.com Table of Contents Introduction
Copyright EXTRON All rights reserved E-M-EN EXTRONCNC.com
YIH CHUAN MACHINERY INDUSTRY CO., LTD HEADQUARTERS 40755 No.8, 9 Rd., Taichung Industrial Park, Taichung, Taiwan T e l : +886-4-2359-3351 Fa x : +886-4-2359-0012 E-mail : extron@extroncnc.com th YIH CHUAN
Built for Speed. Pinzbohr High Precision Boring Tools. Pinzbohr Modular Boring System. BohrSTAR Boring Kits. Rough and Finish Boring Heads
Pinzbohr High Precision Boring Tools BohrSTAR Boring Kits Rough an Finish Boring Heas Boring Hea Toolholers Carbie an HSS Boring Bars Built for Spee. BohrSTAR High Precision Kits Range 0.314" up to 8.27"(8mm
MSeries. High Rigidity Vertical Machining Centers
MSeries High Rigidity Vertical Machining Centers M Series With 40 years experience of manufacturing machine tools, EXTRON has continuously developed and provided creative machine tools for global customers.
About Us. even in allocation times.
History The company SIEGERT was founded in 1945 by Dipl.-Ing. Ludwig Siegert. During the 50ies the enterprise focused on the manufacturing of film resistors. 1965 was the start of production of miniaturized
MHS TOOLS NEWS B137G. Drills for die & mould machining
TOOLS NEWS Solid Carbide for Die & Mould Machining WSTAR Series 2013.3 Update B137G Small diameters now included s for die & mould machining Innovative drilling in hardened steel by eliminating the need
Tungsten Carbide Burrs
Tungsten Carbie Burrs Material Groups,, Types of Cut PFERD tungsten carbie burrs are esigne for machining materials of virtually any strength. Their superior performance reflects an optimum combination
VP-1100/1500 Vertical Machining Center
VP-Series VP-10/1500 Vertical Machining Center http://www.twinhorn.com.tw RIGID CONSTRUCTION INNOVATIVE DESIGN SUPERIOR PRODUCTIVITY All major parts are built with high tensile Meehanite cast iron, featuring
Ballscrews. Table of contents
Ballscrews Table of contents 1. Accuracy rade of HIWIN Ballscrews... 1 1-1. International Standard of Accuracy rade for Ballscrews... 1 1-2. Accuracy rade of Precision Ballscrews... 1 1-3. Standard Combination
MHS B137E. Drills for die & mould machining. New smaller diameters ø0.95 ~ ø2.95 up to 30 x D added to the range. Complete series up to ø12.
Small diameters now included Solid Carbide for Die & Mould Machining 214.1 B137E s for die & mould machining Innovative drilling in hardened steel by eliminating the need for heat treatment after machining.
Tools for Aluminum. New Expanded Offering. ISO 9001 Certified
Tools for Aluminum New Expanded Offering www.kyocera-sgstool.com ISO 9001 Certified S-CAB HIGH PEFOMANCE END MILLS The original, symmetrical flute design features an engineered flute form that provides
Power and Precision in Perfect harmony. Industrial tools from Fuji. Japanese eco-quality since 1943
Power n Precision in Perfect hrmony Inustril tools from Fuji Jpnese eco-qulity since 1943 Power n Precision in Perfect hrmony Inustril tools from Fuji For over sixty yers, the nme Fuji hs been synonymous
PRODUCT INFORMATION. Latest Forming Tap Technology R-XPF-Series. Unsurpassed Performance as well as tool cost reduction!!
PRODUCT INFORATION test Forming Tp Technoogy -Series Unsurpsse Performnce s we s too cost reuction!! test threing technoogy Improve too ife with the spir obe n smooth forming. Enbes high spee tpping with
Pipe cutting machine. REMS Cento REMS Cento RF. for Professionals
Pipe cutting machine REMS Cento REMS Cento RF for Professionals 5 Patent EP 1 782 904 Super fast. Right angled. Chip-free. No outer burr. Dry cutting. 1 German Quality Product 12 3 6 4 9 13 2 14 1 11 10
Center. The Leading Edge in Efficient Machining
Double Column Machining Center The Leading Edge in Efficient Machining A Comprehensive Product Range to Cover All Your Needs VMC-95/VMC-115 Box Ways for X / Y / Z Axes Enhanced Four Over-sized Box Way
KVR SERIES. Quality, Value, and Service MACHINING CENTERS. a.com /
KVR SERIES Quality, Value, and Service www.kentus a.com / www.kentcnc.com KVR SERIES precision by design KVR-4020A with 24-Tool Dual Arm ATC Go ahead make your cut! Be more competitive! In today s global
Pipe cutting machine. REMS Cento REMS Cento RF. for Professionals
Pipe cutting machine REMS Cento REMS Cento RF for Professionals 5 Patent EP 1 782 904 Super fast. Right angled. Chip-free. No outer burr. Dry cutting. German Quality Product 1 12 3 6 4 9 13 2 14 1 11 10
Pipe cutting machine. REMS Cento REMS Cento RF. for Professionals
Pipe cutting machine REMS Cento REMS Cento RF for Professionals 5 Patent EP 1 782 904 Super fast. Right angled. Chip-free. No outer burr. Dry cutting. German Quality Product 1 12 3 6 4 9 13 2 14 1 11 10
Angle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ manually operated 2/2-way angle seat globe valve has an ergonomically designed plastic handwheel. The valve spindle is sealed by a self-adjusting gland
LSeries. High Speed Vertical Machining Center
LSeries High Speed Vertical Machining Center L Series With 40 years experience of manufacturing machine tools, EXTRON has continuously developed and provided creative machine tools for global customers.
S-TAW. Changeable Carbide Insert Type Drill
News 2012.02 - Drilling Tools Changeable Carbide Insert Type Drill Innovative insert clamping offers stability and reliability when drilling small holes. Diameter range ø10.0- ø18.4, L/D 1.5, 3, 5, 8 54
F.O.B. ex-works TopLine USA. Please specify preferred method of shipment when placing order.
2018 Kits HOW TO ORDER Payment Terms Credit Terms (Net 30) for established customers. American Express, Mastercard and VISA accepted. Confirming Purchase Orders Confirming purchase orders are required
Technical features. Cam followers
AM FOLLOWERS Technical features am followers Naella cam followers are esigne to run irectly on various types of surface such as cams, ramps an slieways. In orer to satisfy the operating conitions impose
High Grade Linear Motor Machine
High Grade Linear Motor Machine Ultimate CNC Performance in High Speed and Accuracy State of the Art Linear Motor Technology The cycle time can drastically be shorted thanks to 48% reduction in tool change
SPRINT 20 5 SPRINT 20 8 SPRINT 32 5 SPRINT 32 8 CNC AUTOMATIC TURNING SPRINT 20 SPRINT 32 DMGMORI.COM
SPRINT 20 5 SPRINT 20 8 SPRINT 2 5 SPRINT 2 8 CNC AUTOMATIC TURNING SPRINT 20 SPRINT 2 DMGMORI.COM Machine and technology Concept Applications and parts Technical data Control technology SPRINT 20 5 /
2. HG Series Linear Guideway Four-row Super Heavy Load
16 2. HG Series Linear Guideway Four-row Super Heavy Load 2-1 Features of the HG Series Linear Guideway 2-2 Construction of HG Series Block Cap End cap End seal (Double seals and scraper) Rail Grease nipple
LOW VOLTAGE CAPACITORS AND CAPACITOR BANKS. Capacitors department
LOW VOLTAGE CAPACITORS AND CAPACITOR BANKS Capacitors department I Selecting the reactive energy compensation system 3 II Selecting the capacitor type 4 III ALPIVAR 6 IV V VI VII VIII SPECIAL RANGES 25
I.T MDT * series 20 MODULAR DRIVEN TOOL DEVICE FOR AXIAL SYSTEM DIN 5480 / 5482 COUPLING TECHNICAL INFORMATION ISSUED
series 2 MODULAR DRIVEN TOOL DEVICE FOR AXIAL SYSTEM DIN 548 / 5482 COUPLING TECHNICAL INFORMATION I.T. 6486 GB The data given in the I.T. are subject to technical modifications without notice. ISSUED
TOOLS NEWS B250G. Multi-functional Cutter for High Efficiency Machining VPX. New Product. Series. Boost Your Milling with a Tough Tangential Insert!
TOOLS NEWS B250G Multi-functional Cutter for High Efficiency Machining VPX Series New Product Boost Your Milling with a Tough Tangential Insert! TOUGH & MULTI VPX Series Extremely rigid and functional.
MONO series. Cable carriers for standard applications. Subject to change.
Cable carriers for standard applications 104 Trademarks are legally protected for the TSUBAKI KABELSCHLEPP GmbH as a national or international registration in the following countries: Trademarks Overview