L11 Fused and Non-Fused Disconnect Switches (30 & 60A) Dimensions are in millimeters (inches). Dimensions not intended for manufacturing purposes.
|
|
|
- Brent Horn
- 5 years ago
- Views:
Transcription
1 Series 11 used and Non-used isconnect Switches (30 & 60A) W A E H imension Approximate imensions in mm (in) Reference H W A ➊ E ➊ A1 108 (4-1/4) 120 (4-3/4) 101 (4) 90 (3-9/16) 105 (4-1/8) 85 (3-11/32) 82 (3-15/64) 2-M4, 2-#8 A2 108 (4-1/4) 120 (4-3/4) 80 (3-1/8) 90 (3-9/16) 105 (4-1/8) 85 (3-11/32) 82 (3-15/64) 2-M4, 2-# (4-29/64) 142 (5-19/32) 114 (4-31/64) 100 (3-15/16) 120 (4-23/32) N/A N/A 4-M4, 4-# (4-29/64) 142 (5-19/32) 93 (3-43/64) 100 (3-15/16) 120 (4-23/32) N/A N/A 4-M4,4-#8 ➊ Mounting holes are backward compatible with 10 isconnect Switches 48
2 Series 11 used isconnect Switches (100A) used isconnect Switches (200A)
3 Series 11 used isconnect Switches (400A) ( 3P) (4P) 259 (3P) (4P) used isconnect Switches ( A) min min Ø Ø (3P) (4P) 284 (3P) - (4P) (3P) (4P) 364 (3P) (4P)
4 Series 11 Non-used isconnect Switches ( A) M J1 U Z Y Terminal Shrouds W R1 H N AA A V K A R2 T A 11-N im. Ref N im. Ref Overall Approximate imensions in mm (in) Terminal Shrouds Switch ody Switch Mounting A A (3-pole) 94.6 (3.72) 94.6 (3.72) 128 (4.92) 256 (10.1) 256 (10.1) 406 (16) 77.5 (3.05) 77.5 (3.05) 115 (4.15) 180 (7.09) 180 (7.09) 230 (9.05) (4-pole) 230 (9.06) 230 (9.06) 290 (11.4) H 107 (4.22) 107 (4.22) 166 (6.53) Approximate imensions in mm (in) onnection J1 (3-pole) 55 (2.17) 55 (2.17) 75 (2.95) J1 (4-pole) 105 (4.13) 105 (4.13) 135 (5.31) T U V W Y Z AA A 50 (1.97) 50 (1.97) 65 (2.56) 25 (0.98) 25 (0.98) 45 (1.77) 30 (1.18) 30 (1.18) 50 (1.97) 11 (0.43) 11 (0.43) 13 (0.51) 3.5 (0.14) 3.5 (0.14) 5 (0.2) 34.4 (0.14) 34.4 (0.14) 53 (2.08) 160 (6.3) 160 (6.3) 260 (10.2) 15 (0.6) 15 (0.6) 20 (0.8) K 45.6 (1.8) 45.6 (1.8) 67.5 (2.65) M (3-pole) 160 (6.3) 160 (6.3) 210 (8.26) M (4-pole) 210 (8.7) 210 (8.7) 270 (10.6) N R1 R2 135 (5.31) 135 (5.31) 195 (7.67) 9 (0.35) 9 (0.35) 9 (0.35) 7 (0.27) 7 (0.27) 7 (0.27) 51
5 Series 11 Non-used isconnect Switches (600A) H Z J M Ø Ø 13 Y X A N N1 AA N im. Ref Approximate imensions in mm (in) Terminal Shrouds Switch ody Switch Mounting onnection A (3-pole) (4-pole) H J (3-pole) J (4-pole) M (3-pole) M (4-pole) N N1 AA Z (18.12) (11) (14.17) (5.5) (5) (6.59) (10.03) (13.19) (6.88) (2.34) (12.6) (1.85) 11 Non-used isconnect Switches ( A) H Z Ø 0.43 Ø 11 J M AA A Y X N1 N2 N AA N im. Ref. 4 Approximate imensions in mm (in) Terminal Shrouds Switch ody Switch Mounting onnection A (3-pole) (4-pole) H J (3-pole) J (4-pole) M (3-pole) M (4-pole) N N1 AA Z (18.12) (14.64) (19.37) (5.5) (6.83) (9.19) (13.66) (18.38) (6.88) (2.34) (13) (1.85) (18.12) (14.64) (19.37) (5.5) (6.83) (9.19) (13.66) (18.38) (6.88) (2.34) (13) (1.85) 52
6 Series 11 isconnect Handles 11 Metal Operating Shaft imensions 11-S1..S2 11-R7..R8 11-R9..R12 A A atalog Number A 2 mm (in) mm (in) mm (in) 11-S (0.238) (12) 11-S (0.238) 533 (21) 11-R7 10 (0.39) 320 (12.6) ~ 11-R8 10 (0.39) 580 (22.8) ~ 11-R9 12 (0.47) 320 (12.6) 22 (0.87) 11-R10 12 (0.47) 560 (22) 22 (0.87) 11-R11 12 (0.47) 320 (12.6) 22 (0.87) 11-R12 12 (0.47) 560 (22) 22 (0.87) Typical View 11-P*/11-P*T Operating Handles mm ( ) 80 (3.15) 114 (4.49) 72.3 (2.85) ront of over ø 35 (ø 1.38) 76.7 (3.02) ront 25.4 (1) 34 (1.34) 50 (1.97) 25 (0.98) 25 (0.98) 50 (1.97) 51 (2.01) Right Side OR 25 (0.98) 26.7 (1.05) ø 35 (ø 1.38) 31.5 (1.24) 63 (2.48) (2) - ø 5.5 (0.22) (2) - ø 5.5 (0.22) 53
7 Series 11 isconnect Handles 10-HM4/HM4E Operating Handles dia. dia. Operating Handles at. No. 10-HM4, -HM4E 11-HM4*-/-N2- Operating Handles Ø 78 (3.07) 0 90 I 4 Ø 7 (0.27) Ø 37 (1.46) 20 (0.78) 210 (8.27) 14 (0.55) 14 (0.55) 20 (0.78) 61 (2.40) 54
8 Series 11 isconnect Handles 11-N1 & 11-N2 Operating Handle (30 & 60A) Next Generation 11 egacy 10 isconnect isconnect 11-N30- > 165 mm 6.5 in 10-NN030 > 170 mm 6.75 in J30- > 190 mm 7.5 in 155 mm 6.0 in 10-N NJ NA NA200 > 210 mm 8.25 in 140 mm 5.5 in 11-N H30-11-H60-11-J60- > 180 mm 7.0 in > 205 mm 8.0 in 170 mm 6.75 in 10-NN NJ NA300 > 170 mm 6.75 in > 210 mm 8.25 in 115 mm 4.5 in 55
9 AVAIAE 2014 imensions Series 11-_ able-operated Handle 11- NPA79 able-operated Handle The 11- cable-operated disconnect with interlock provides a fully compliant solution to the 2002 changes in the National ire Protection Association 79 (NPA 79). The 11- combines the small size of the 11 IE disconnect with the flexibility of a cable-operated mechanism to provide an NPA 79 IE solution for flange style enclosures. The 11- bracketed mechanism for and 60 A devices attaches to the 11 disconnect switch base and operates the ON-O action via cable to a standard 10/11 handle. The 11- handle/interlock mechanism provides the no-tools operation and the secondary interlock as required by NPA changes. The 11- cable-operated disconnect is offered in 3 10 ft cable lengths, allowing a variety of placement options for the 11 disconnect within the enclosure. The handle (ordered separately) is available in 3 different styles: plastic, stainless steel, or painted metal (6) (4-7/8) mm (in.) 100 (3-15/16) (8) Ref (10) Min. 56
10 AVAIAE 2014 imensions Series 11-SK1 Side-Mounted Handle 11-SK1 Side Mounted Handle The 11-SK1 side-mount handle provides NPA 79 compliancy with a bracketed switch and interlock system. The 10-HS rotary handle is mounted to the side of the enclosure and attaches to the 11 disconnect and interlock mechanism. The side handle remains connected to the switch and interlock mechanism at all times. This solution provides the single, side handle design with the NPA 79 compliancy of the secondary interlock. This kit is used with the 10-HS family of disconnect handles (sold separately). Hinge Side 38.1 (1-1/2) Enclosure Thickness mm (in) 15.9 (ø 9/16) 88.4 (3-31/64) 31.8 (1-1/4) Min. (6) 25 (63/64) 6.4 (1/4) 5.6 ø (ø 7/32) 2 Holes 22.2 (7/8) oor Hook efeater ever Interlock 5.6 ø (ø 7/32) 6 Holes 63.5 (2-1/2) 88.9 (3-1/2) 44.4 (1-3/4) 25 (63/64) 34.9 (ø 1-3/8) 50 (1-31/32) 50.8 (2) (4) (8-7/32) Ref. 50 (1-31/32) 89.4 (3-33/64) Hinge Side oor Hook 51 (2.01) 11-P* Handle 57
11 Series 11 Enclosure and Operating Handle imensions A 51 (2.01) E atalog Number J imension Reference A E Maximum Minimum Minimum Maximum Minimum Minimum Minimum Maximum A1 171 (6-3/4) 45 (1-49/64) (5-13/16) 454 (17-7/8) 248 (9-3/4) 89 (3-1/2) 1.4 (1/16) 4/78 (3/16) 11-N A2 171 (6-3/4) 45 (1-49/64) 111 (4-3/8) 454 (17-7/8) 248 (9-3/4) 89 (3-1/2) 1.4 (1/16) 4/78 (3/16) 11-J H (7-3/4) 45 (1-49/64) (5-13/16) 454 (17-7/8) 248 (9-3/4) 105 (4-9/64) 1.4 (1/16) 4/78 (3/16) 11-H N (7-3/4) 45 (1-49/64) 111 (4-3/8) 454 (17-7/8) 248 (9-3/4) 105 (4-9/64) 1.4 (1/16) 4/78 (3/16) 58
12 Series 11 Enclosure Installation imensions A 1 1 A [2.01] E atalog Number J N imension Reference A1 A2 A1 A2 E Min. Min. Min. Min. Min. Max. Min. Min. Min. Max. 171 (6/3-4) 171 (6-3/4) 203 (7-63/64) 203 (7-63/64) 45 (1-49/64) 45 (1-49/64) 76 (3) 76 (3) 178 (7) 178 (7) 454 (17-7/8) 454 (17-7/8) 248 (9-3/4) 248 (9-3/4) 89 (3-1/2) 89 (3-1/2) 1.4 (1/16) 1.4 (1/16) 4.78 (3/16) 4/78 (3/16) 11-J H H (7-3/4) 228 (8-63/64) 45 (1-49/64) 76 (3) 178 (7) 454 (17-7/8) 248 (9-3/4) 105 (4-9/64) 1.4 (1/16) 4.78 (3/16) 11-N (7-3/4) 228 (8-63/64) 45 (1-49/64) 76 (3) 178 (7) 454 (17-7/8) 248 (9-3/4) 105 (4-9/64) 1.4 (1/16) 4.78 (3/16) 59
13 Series Type 3/4/12 - Watertight, usttight Sheet Metal Enclosure (30 & 60A) Amps Type im. Ref. A E used & Non-fused used & Non-fused A1, A2 1, 2 (12.00) (12.00) (12.00) (12.00) 173 (6.80) 173 (6.80) 224 (8.81) 224 (8.81) (10.5) (10.5) (10.5) (10.5) Type 4/4X Watertight, orrosion-resistant Stainless Steel Enclosure (30 & 60A) A E Amps Type im. Ref. A E used & Non-fused used & Non-fused A1, A2 1, 2 (12.00) (12.00) (12.00) (12.00) 173 (6.80) 173 (6.80) 224 (8.81) 224 (8.81) (10.5) (10.5) (10.5) (10.5) 60
14 Series Type 3/4/4X/12 - orrosion Resistant Non-Metallic Enclosure (30 & 60A) K 5.5 (15/64) A H J 32 (1-1/4) G (4)- 8 X 13 SOT MTG. HOES (11/32) (17/32) Amps Type im. Ref. A G H J K 30 & 60 used & Non-used A1 & A2 1 & (8.92) (10.52) 163 (6.42) 214 (8.43) 278 (10.95) 152 (8.0) 216 (8.50) (12.0) Type 4/4X Watertight, orrosion-resistant Stainless Steel Enclosure (100A) 6 (0.23) O ON Amps Type im. Ref. A E 100 used & Non-fused (16.00) 406 (16.00) 224 (8.80) 282 (11.10) 368 (14.5) 368 (14.5) 61
15 Series Type 4/4X Watertight, orrosion-resistant Stainless Steel Enclosure (200 & 400A) Amps Type im. Ref. A E G H 200 used & Non-used (16) (24) (8-51/64) (11-5/64) (27-5/64) (25-19/32) (14-1/2) (22-1/2) 400 used & Non-used (24) (30) (12-51/64) (15-5/64) (33-5/64) (31-15/32) (22-1/2) (28-1/2) Type 3/4/4X/12 - orrosion Resistant Non-Metallic Enclosure (100A) K 5 (3/16) A H J G (4)- 8 X 13 SOT MTG. HOES 32 (1-9/32) (11/32) (17/32) Amps Type im. Ref. A G H J K used & Non-used (14-31/32) (16-1/4) (8-31/64) (10-49/64) (16-61/64) (12) (14-9/16) (18) (13/64) 62
16 Series Type 3/4/4X/12 - orrosion Resistant Non-Metallic Enclosure (200A) K 11.5 (29/64) A J G (4)- 10 IA. MTG. HOES (13/32) Amps Type im. Ref. A G J K 200 used & Non-used (20-13/64) 625 (24-5/8) 292 (11-31/64) 350 (13-25/32) 648 (25-1/2) 457 (18) 686 (27) 11.5 (29/64) Type 3/4/4X/12 - orrosion Resistant Non-Metallic Enclosure (400A) K 10.5 (27/64) A J 57mm (2-1/4") G (4)- 10 IA. MTG. HOES (13/32") Amps Type im. Ref. A G J K 400 used & Non-used (24 1/8) 775 (30 33/64) 343 (13 31/64) 401 (15 23/32) 796 (31 31/32) 555 (21 7/8) 834 (32 27/32) 10.5 (13/32) 63
Big performance in a small package
11 Series 11 Fusible up to 800A & Non fusible up to 1200 Amps Suitable as a Service Entrance ing Means TIP! Manual Switching Devices: Control, oad or Fusible Which is Best For Your Application? Application
Big performance in a small package
Series 11 Fusible up to 800A & Non fusible Disconnect Switches up to 1200 Amps Suitable as a U98 Service Entrance Disconnecting Means TIP! To learn the basic differences between control, load and fusible
Big performance in a small package
Series 11 Fusible up to 800A & Non fusible Disconnect Switches up to 1200 Amps Suitable as a U98 Service Entrance Disconnecting Means TIP! Manual Switching Devices: Control, oad or Fusible Disconnect Switches
UL Class J and CSA HRCI-J Fuses ➋. obsolete. CSA HRCII-C Fuses. Maximum Horsepower ➊
Series U/CSA Fused Amp Rating 1 Ø (60Hz) Maximum Horsepower ➊ Three Phase (60Hz) DC Switch (typical) (A) 120V 240V 200V 240V 460V 600V 125V 250V Catalog Number Price U Class J and CSA HRCI-J Fuses ➋ 30
Big performance in a small package
Series usible & Non-fusible 100 400A Suitable as a Service Entrance ing Means TIP! Manual Switching Devices: Control, oad or usible Which is Best or Your Application? Application Data Typical Control Switch
Big performance in a small package
Series Fusible & Non-fusible Sprecher + Schuh s series of fused and non-fused disconnect switches comply with service entrance requirements. This family of rod operated switches is suitable for applications
Sprecher + Schuh s broad line of IEC/UL HP rated contactors can be purchased pre-installed in a variety of standard enclosures. Cataloged enclosures
Enclosed ontactors Sprecher + Schuh s popular contactor lines housed in a variety of enclosures Sprecher + Schuh s broad line of E/UL HP rated contactors can be purchased pre-installed in a variety of
3/2 ^ % Features. Construction. Electrical
4 Pilot Operated Spool Valves xplosionproof Solenoid Valves 316L odies 1/4" NPT 3/2 SRIS 364 eatures Ideal for oil and gas control panel applications rop-in replacement design - compatible with most existing
600V, Non-Fusible, (3-Pole, 3 Phase)
0V, Non-Fusible, (3-Pole, 3 Phase) ulletin 1494G/1494GX1494GY Non Fusible 0 A switch ratings 0V: 3-pole, 3-phase and 6-pole, 3-phase versions versions only Type 3R/4/12 (painted metal), Type 4/4X (stainless
D I D /240 I. D x /240 I D / x x /24 I. D x /120
ndustrial ontrol Transformers lass 9070 www.square.com or the most up-to-date information The T units are designed for the global market and are the best choice when size and cost are of concern. This
NMC Combination Line Starters and Enclosures
NMC Combination Line Starters 600VAC Heavy uty atertight eatherproof Applications: NMC combination magnetic line starters are for use in across-the-line motor starting, motor disconnect, motor and line
Bulletin 1494V Variable Depth, Flange Operated Circuit Breaker Kits for 125A, 150A 250A and 400A Frame Sizes
ulletin 494V Variable epth, Flange Operated ircuit reaker Kits for 5A, 50A 50A and 400A Frame Sizes ATTENTION: To prevent electrical shock, disconnect from power source before installing or servicing.
Bulletin 1494F 30A, 60A, 100A Fixed-Depth Disconnect Switch (Cat 1494F-N30; 1494F-N60; 1494F-N100; Series C)
Installation Instructions ulletin 1494F, 60, Fixed-epth isconnect Switch (at 1494F-N30; 1494F-N60; 1494F-N100; Series ) WRNING: To prevent electrical shock, disconnect from power source before installing
UL Enclosed Disconnect Switches (Fused and Non-Fused)
Product Selection UL Enclosed Disconnect Switches (Fused and Non-Fused) Catalog Number Explanation 194R-K Non-Metallic Enclosure UL Type 3/4/4X, IP66 194R-F Painted Steel Enclosure UL Type 3/4/12, IP66
Bulletin 194R Next Generation Global Fused and Non-Fused Disconnects
Bulletin R IE Fused and Non-Fused Disconnects, & A Overview Bulletin R Next Generation Global Fused and Non-Fused Disconnects A A Sizes Fused switch versions: - BS - DIN - SA HRII- - SA HRI-MIS - UL lass
Manifolds WAY MANIFOLDS. Instrument valves & manifolds
Manifolds WY MNIFOLDS Instrument valves & manifolds OVERVIEW STV offers a broad line of 1,2,3,4 and 5-way instrument manifolds, all available in a wide range of materials and fully compatible with the
Bussmann series IEC cylindrical fuses
IE and ritish Standard fuses 5 ontents ussmann series IE cylindrical fuses Section page escription Fuses S Type P and fuses (N, S and PON) HR Form II lass fuses (GL) 3 HRI industrial ceramic body fuses
EEA & EEB Series. UL Recognized CSA Certified VDE Approved EEA2 / EEB2
atalog: 16541 Issue ate: 6.11 Including the S/S and H/H Models ost-effective MI Power Inlet Filter UL Recognized S ertified V pproved 2 / 2 1 / 1 P / P Series ompact single stage MI filter with I 63-1
HM SERIES. (Outdated connector) Features P-01
(Outdated connector) P-01 Features The HM connector series has a 4 mm pitch between terminal poles. This series consists of a 2.3mm type (2.3mm and 6.6mm types for the hybrid model) classifi ed according
Heavy-Duty Enclosures Type 12 Free Standing Disconnect with Sub Panel
eavy-uty Enclosures PPLICTIONS - esigned to provide protection for electrical instruments, terminals, and controls from dust, oil, dirt and dripping liquids. CONSTRUCTION - abricated from 10 gauge carbon
E C N A A F -
33-52 NA ontactors & Starters 3-Phase agnetic Starters nclosed Freedom Line January 1 Vol. 2, Ref. No. [0068] Selection Table 33-102. NA Freedom Line nclosed ontrol ing System 33 esign Page N - NA 33-40
Bulletin 109 IEC Non-Reversing Starters. Product Overview/Product Selection. Table of Contents
Bulletin IEC Non-Reversing Starters Product Overview/Product Selection Cat. No. -CABAF--R-P IP (Type ) Metal Enclosure with Lift-off Cover Bulletin IEC Non-Reversing Starters Impact-resistant molded enclosures
Switches Section 1. Load Break Switches. Accessories for Load Break Switches. 4 Pole Part Price Each Reference
Load Break Switches According to BS EN60947-3 High Thermal & Dynamic Strength Fully rated suitable for distribution & motor loads Auxiliary contacts also available Fully Visible Breaking Arduous categories
Provides the convenience of pre-fabricated bracing and bridge beam accessories.
Harrington Beam Accessory Kits Provides the convenience of pre-fabricated bracing and bridge beam accessories. For use with any Harrington end truckspecify end truck model when ordering. Kit includes:
^ % 3/2 5/2 SERIES 362/562. Features. Construction. Nominal Ambient Temp. Ranges. Electrical
Pilot Operated Stainless Steel Spool Valves xplosionproof Solenoid Valves 6 Stainless Steel odies /4" NPT / / SRIS 6/6 eatures Ideal for valve automation for the oil and gas market Reliable, robust design
Section 6 Feet & Casters
atalog 1816-3/US ontents Section 6 155 Wadsworth, Ohio US atalog 1816-3/US Leveling Feet Leveling Foot 21-001 21-001-30 pplication 21-001 21-001-30 Series min max Max Load N (lbs) (g) 40 40 40 21-001 30
Certifications UL Listed (File No. E 14841, Guide NLRV; File No. E 47426, Guide WHTY) CSA Certified (File No. LR1234) CE
Bulletin R Overview Bulletin R Next Generation Global Fused and Non-Fused Disconnects 0 A A Sizes Fused Switch Versions: - BS - DIN - CSA HRCII-C - CSA HRCI-MISC - UL Class J - UL Class CC - NFC Non-Fused
3/2 SRIS Important These solenoid valves are intended for use on clean dry air, inert gas, or sweet dry natural gas filtered to 40 micron or bet
4 Pilot Operated Spool Valves xplosionproof Solenoid Valves 316L odies 1/4" NPT 3/2 SRIS 364 eatures Ideal for oil and gas control panel applications rop-in replacement design - compatible with most existing
194R J S TY N1
Bulletin R IE Fused and Non-Fused Disconnects, & A Product Selection omplete UL/SA Disconnect Switch Kits Includes disconnect switch, operating handle with defeater mechanism and operating shaft, NFPA
Submittal. THBP Horizontal Low Profile Plenum Return FCU-THBP Top View (Drain Pan Omitted) Bottom View. Front View.
U-THBP-.0 03-0-8 THBP Horizontal Low Profile Plenum Return Top View (rain Pan Omitted) Bottom View ront View Left hand unit shown. ll dimensions are inches [millimeters]. Side View [8] 26 [6] [06] [270]
Maximum performance. Always.
54 Maximum performance. Always. Rotary control devices in box A23A A3 INSTALLATION LASS, ONDITIONAL SHORT IRUIT URRENT 0,000A. THEY ALLOW DIRET ONTROL OF HIGHLY INDUTIVE LOADS. THEY ELIMINATE OSTLY MAHINE
NPA-CP. Pendant control station OPTIONS FEATURES CERTIFICATIONS
Pendant control station NPA-CP Pendant station for direct control of industrial machines. Sturdy and handy, NPA-CP is speciically designed for heavy duty in industrial environments. FEATURES The cable
Disconnect Switch and Circuit Breaker Mechanism Specifications Bulletin Number 1494
Technical ata isconnect Switch and ircuit reaker Mechanism Specifications ulletin Number 1494 Topic Page 1494U isconnect Switch Specifications 2 1494, 1494F, 1494G, 1494R, 1494V isconnect Switch Specifications
Control and Automation
onsumer & ndustrial Power Protection ontrol and utomation or industrial applications.03 imagination at work Plug-in relays and uxiliary contactors Motor protection devices ontactors and Thermal overload
GE Industrial Solutions. Limitamp * AR. Arc Resistant Medium Voltage Motor Control. Installation Guide
GE Industrial Solutions Limitamp AR Arc Resistant Medium Voltage Motor ontrol Installation Guide Table of ontents Introduction...3 Opening Medium Voltage oor...3 Medium Voltage oor Latches... Isolation
Repair Parts Model 0.5/4 Crane
MODEL 0.5/4 : 99903420: 20111129 PAGE - 1 MATERIAL HANDLING SYSTEMS Repair Parts Model 0.5/4 Crane IOWA MOLD TOOLING CO., INC. BOX 189, GARNER, IA 50438-0189 641-923-3711 MANUAL PART NO: 99903420 Iowa
Type EK 9F61 Series Medium Voltage Fuse Holders & Clips
Type EK 961 Series Medium Voltage use Holders & lips USE LOKS & HOLERS USE SUPPORTS, USE ISONNET SWITHES, AN AESSORIES ROM 2.4KV TO 38KV use supports, non-disconnecting, are used primarily in potential
DISCONNECT SWITCHES (16 TO 630 amp)
I DISCONNECT SWITCHES (16 TO 630 amp) Springer Controls is partnered with MERZ-PCE, a world leader in the manufacturing of switch gears. We carry a complete line of UL approved, CSA listed, Disconnect
Type 12 / 13 Enclosures
Type 12 Free-Standing Enclosures ata Sheet pplication Houses electrical controls and instruments Easy access fixed or swing panels for optional equipment ual-access construction available for back-to-back
I Ex-Safety switches I
3-pole, 20 A Technical data Ex-Safety switch 20 A for variable-speed three-phase drives Marking to 94/9/EC II 2 G Ex ed ia IIC T6 / II 2 D Ex td A21 IP66 T80 C EC-Type Examination Certificate PTB 99 ATEX
SD Series Non-Fused Load Switches
SD Series Non-Fused Load Switches The SD1 and SD2 series of non-fused load switches are listed as Manual Motor Controllers and are designed for use in local motor isolation. The SD series of modular load
Heavy Duty Safety Switches
eavy uty Safety Switches Class 3110 CONTENTS escription Class Page Application ata......................... 3110....................... 2-6 Technical ata........................... 3110........................
NPA-CP Pendant Control Station
NPA-CP Pendant Control Station Pendant station for direct control of industrial machines. Sturdy and handy, NPA-CP is specifically designed for heavy duty in industrial environments. FEATURES The cable
AM-Tite Series Non-Metallic Plugs MSR Series Switched and Interlocked Receptacles
AM-Tite Series Non-Metallic Plugs MSR Series Switched and Interlocked Receptacles Compatible with UL 1686 C1 Pin & Sleeve Devices Safer. Easier. Better. MENNEKES Non-Metallic MSR Switched and Interlocked
Bulletin 194R Next Generation Global Fused and Non-Fused Disconnects
Bulletin R IEC Fused and Non-Fused Disconnects, & A Overview Bulletin R Next Generation Global Fused and Non-Fused Disconnects A A Sizes Fused switch versions: - BS - DIN - CSA HRCII-C - CSA HRCI-MISC
Current-limiting fuse mounts
Fusing quipment atalog ata 132046N Supersedes November 2015 urrent-limiting fuse mounts OOPR POWR SRIS eneral aton provides overload protection for all indoor and underground cable distribution systems
NPA-CP. Pendant control station. OPtiONs. FeAtures. CertiFiCAtiONs
Pendant control station NPA-CP Pendant station for direct control of industrial machines. Sturdy and handy, NPA-CP is speciically designed for heavy duty in industrial environments. FeAtures The cable
CLASSEQ LTD. Spares manual P500
CLASSEQ LTD Spares manual P500 Spares manual 30/01/2018 Spares manual Page 1 P500 Table of contents for P500 1. Machine assembly... 3 2. Front panel assembly... 5 3. Front Panel... 7 4. Control unit assembly...
I Ex-safety switches I
3-pole, 20 A Technical data Ex-safety switches 20 A for controlled three-phase drives Marking accd. to 94/9/EC II 2 G Ex ed ia IIC T6 / II 2 D Ex td A21 IP66 T80 C EC-Type Examination Certificate PTB 99
OPERATOR ADAPTER A21ABA
OPERATOR ADAPTER A21ABA Installation Instructions for Allen Bradley Bulletin 1494F Disconnect Switches And Bulletin 1494D Circuit Breaker Operating Mechanisms (For parts list, see page 2) For floor mounted
Open, NEMA Type 1, 3R, 4/4X and 12. Auxiliary Contacts
0.- Motor Starters & ontactors Low Voltage Lighting ontactors lectrically eld N January 00 Sheet 18 0 1 7 8 0 1 7 8 0 N-Open (L0-nclosed) 0 mpere 0 mpere Product escription Lighting ontactors are designed
Control Circuit and Industrial Interlock
Control Circuit Connectors Overview Defined Any application where electrical connections need protection from water and/or dust entering the contacts or the wiring compartment Russellstoll Line Selections
Bulletin 1494V Variable Depth, Flange Operated Disconnect Switch Kits for 400 and 600 Amperes (Series A) Switches
Bulletin 494V Variable Depth, Flange Operated Disconnect Switch Kits for and Amperes (Series A) Switches ATTENTION: To prevent electrical shock, disconnect from power source before installing or servicing.
ADEX Series Air Control Valves A00.01 Cv M3 Port A05.18 Cv M5 Port A12.47 Cv 1/8" Port zpv02 A B C D E F G H. Section H
X Series ir ontrol alves 00.0 v ort 05.8 v 5 ort.47 v /8" ort zpv02 Section www.parker.com/pneu/adex asic alve unctions... 2 asic alve eatures... ommon art umbers / R Type alves... 4 odel umber Index /
A Safety-First Priority
CIRCUIT-LOCK and MOTORQUICK Manual Motor Controllers and Disconnects Wiring Device-Kellems A Safety-First Priority Hubbell s Circuit-Lock Manual Motor Controllers "Suitable as Motor Disconnects" Hubbell
Basin and Package Accessories TECHNICAL BROCHURE BCBASIN FEATURES
TECHNICAL BROCHURE BCBASIN FEATURES Fiberglass Basins - heavy duty construction, standard sizes to 72" ia. and 96" eep, custom basins to 20' deep available by quote request. Covers Pipe Grommets - Use
Bulletin 194R TABLE OF CONTENTS Bulletin 194R IEC Fused and Non-Fused Disconnects
4 Bulletin 194R TABLE OF CONTENTS Bulletin 194R 20 A 400 A Sizes Open or Enclosed Switches d Switch Versions: BS88 DIN CSA HRCII-C CSA HRCI-J UL Class J UL Class CC Non-d Switches Operating Handle Ingress
60A & 100A IEC 309 Watertight pin & sleeve devices
Technical Data AH560R7W AH560C9W IP69K certified AH560P9W AH560B9W Product Description - North American 60A & 100A; 2-pole, 3-wire grounding; 3-pole, 4-wire grounding; 4-pole, 5-wire grounding Pin & sleeve
Compact Circuit Protector
Supersedes February 2019 BUSSMANN SERIES Compact Circuit Protector (cat. no. CCP2) 2011/65/EU CCP2 switch up to 100 A 200 A CCP2 switch 400 A CCP2 switch Contents Page 30, 60 and 100 amp switches s and
CLASSEQ LTD. Spares manual P500A
CLASSEQ LTD Spares manual P500A Spares manual 12/01/2018 Spares manual Page 2 P500A Table of contents for P500A 1. Machine assembly... 4 2. Front panel assembly... 6 3. Front Panel... 8 4. Control unit
Machine Tool Industrial Control Transformers
Hammond Power Solutions Inc. Page of Machine Tool Industrial ontrol Transformers The HPS Imperator TM series of machine tool rated industrial control transformers are specifcally designed to meet high
APEX DRIVE USER GUIDE ADDENDUM: LVD INSTALLATION INSTRUCTIONS
APEX DRIVE USER GUIDE ADDENDUM: LVD INSTALLATION INSTRUCTIONS Product Type: APEX10, APEX20 and APEX40 Servo Drives The above products are in compliance with the requirements of directives 72/23/EEC Low
UL/CSA Non-fused Disconnect Switches
Product Selection UL/CSA Non-fused Disconnect Switches Cat. No. 194R-N30-1753 Cat. No. 194R-J100-1753 Note: Your order must include 1) Cat. No. of disconnect switch, 2) shaft, 3) handle, and 4) any accessories.
A robust, pilot operated solenoid valve for direct mounting to pneumatic actuators Figure 79E/79U and PremiAir.
VI F79N Namur Solenoid Valve robust, pilot operated solenoid valve for direct mounting to pneumatic actuators Figure 79E/79 and Premiir. Features ompact design with standardized market proven NMR mounting
Fusible. Fusible disconnect switches 30A 1200A, 600VAC. Phone: Fax: Web: -
disconnect A 1200A, 600VAC Disconnect Disconnect ABB PowerLine includes seven different amperage sizes from A to 1200A. All ABB fusible are designed to meet customer requirements in terms of high interrupting
Contactors & Starters Index
ontactors & Starters Index NEMA ontrol Description Page Number General Information - HP... A Magnetic ontactors - HP...4 A Magnetic Reversing ontactors - HP... 4 A Magnetic Starters - HP... A Magnetic
ITT. CentriPro Fiberglass Basins, Covers, Hatches, Access Doors and Accessories. CentriPro. Engineered for life BCBASIN R4. Wastewater.
CASIN R4 ITT CentriPro Fiberglass asins, Covers, Hatches, Access oors and Accessories CentriPro is a brand of ITT Corporation. www.centripro.com CentriPro Features Fiberglass asins - heavy duty construction,
MOULDED CASE CIRCUIT BREAKERS 16A TO 630A
TEMBREAK 2 MOULDED CASE CIRCUIT BREAKERS 16A TO 630A 1. Welcome to TemBreak 2 2. Ratings and Specifications 3. Operating Characteristics 4. Application Data 5. Accessories 6. Installation 7. Dimensions*
Hinges. Concealed hinges. Concealed hinge 90 opening
oncealed hinges oncealed hinge 90 opening Pins and links in 430 stainless steel Mounting features: - For nested doors or surface mounted doors. - LH or RH options. - For horizontal or vertical applications.
UL 98 Fusible Disconnect Switches
UL 98 Fusible isconnect witches ICONNECT WITCHE Mersen s fusible disconnect switches are listed to UL 98 and bear the CE mark conforming to IEC 60947-3. They are service entrance devices capable of fully
DOWN Position. Base Circuit See Page V11-T4-35. (Keyway) 1PST ON NONE OFF A (8.74) (11.91)
. Toggle Switches General Purpose Toggles Rated Product Selection Rated Toggle SwitchesSingle-Pole Rating 6, 5 Vac, 50 Vac 0, 50 Vac / hp, 50 Vac 5, 5 Vac 0, 50 Vac / hp, 50 Vac / hp, 5V Vac 5, 5 Vac 0,
Presentation, Application Severe Duty Limit Switches Mill and Foundry Switches Conforming to NEMA A600 and UL508
Presentation, pplication Severe uty Limit Switches 0 onforming to NEM 600 and UL508 escription 9007T Mill Switches Use the 9007T Mill switches instead of other limit switches in the following applications:
60A & 100A IEC 309 Watertight pin & sleeve devices
Technical Data AH560R7W AH560C9W IP69K certified AH560P9W AH560B9W Product Description - North American 60A & 100A; 2-pole, 3-wire grounding; 3-pole, 4-wire grounding; 4-pole, 5-wire grounding Pin & sleeve
Normally Closed Type High Vacuum Straight Solenoid Valve. How to Order XSA S 5 G. Fitting size. Fitting Type
Series XS Normally losed Type igh Vacuum Straight Solenoid Valve ow to Order [Option] Normally closed high vacuum straight solenoid valve XS 1 1 S Solenoid size 1 No.1 No. No. 1 Orifice symbol ø ø ø4.
June 2005 CN35 Electrically Held Vol. 2, Ref. No. [0494]
![June 2005 CN35 Electrically Held Vol. 2, Ref. No. [0494]](/thumbs/80/81008369.jpg "June 2005 CN35 Electrically Held Vol. 2, Ref. No. [0494]")
7-2 Lighting ontactors Open ontrol June 2005 N5 lectrically Held Vol. 2, Ref. No. [09] ontents eatures Instructional Leaflets 7 escription Page lectrically Held Product escription....... 7-2 pplication
PLUGS & RECEPTACLES. INNOVATIVE EXPLOSION PROTECTION by R. STAHL
Series Features: Color coding and pin configuration makes it physically impossible to mate plugs and receptacles of different voltages and current ratings (per IEC 60 309-2). Interlocked switch mechanism
Packaged Pump Sets FOR DIESEL FUEL OIL APPLICATION. Packaged Pump Sets for Diesel/Fuel Oil Application Page 1
Packaged Pump Sets for Diesel/Fuel Oil Application Page 1 Packaged Pump Sets FOR DIESEL FUEL OIL APPLICATION Packaged Pump Sets for Diesel/Fuel Oil Application Page 2 Description Simplex SPS Series Packaged
EPS-ECONOMY PUMP STARTER
EPS-ECONOMY PUMP STARTER 1 & 3 Phase, 50/60Z, 200-600 VAC, 1-80A The enhanced Franklin Electric Economy Pump Starter (EPS) provides a simple and dependable starting option with a wide electronic overload
Mipco Connections for Refrigerated Containers. No One Does It Like Mipco. The Mipco. Advantage. Reliability. Safety. Easy Installation & Service
No One Does It Like Mipco Mipco Interlocked Reefer Power Outlets are used extensively in port terminals and shipboard applications to provide a safe, watertight electrical connection for refrigerated containers.
IEC Load Switches Bulletin 194E 25 Amps to 100 Amps
Description load switches are designed for use as local motor isolation and IEC disconnect switch applications outside North America. Available with 3- and 6-pole versions with add-on additional poles,
For ATEX zone 1/1, 22/22 and 21/21. Work area: Max. pressure: 5,800Pa Max. air volume: 32,500m³/h
For ATEX zone 1/1, 22/22 and 21/21 Centrifugal fan with closed fan wheel that is used at source extraction from air pollulant or chip making work processes. The transported air may not contain adhestive
Harrington Beam Accessory Kits. Options and Accessories: Consult Factory. Compliance
Harrington Beam Accessory Kits Provides the convenience of pre-fabricated bracing and bridge beam accessories. For use with any Harrington end truck specify end truck model when ordering. Kit includes:
Code no. 61 STAINLESS STEEL 316 HINGES
Code no. 61-003 Stainless steel pin diameter 7 mm. With stainless steel washers and 6 countersunk holes for M5 screws. L 76 x 76 x 2.5 mm, pin dia = 7 mm R/H Stainless steel pin diameter 7 mm. With stainless
Series 10-M. RoHS. Miniature Fittings. Construction. Tubing. Tubing. Barb. Barb. Body. Cap Nut. Gasket. Body. Gasket.
Series 10-M Miniature Fittings onstruction RoHS irectional ontrol Valves arb onfiguration for easy insertion into the Holds the tube tightly. ody lectroless plated nickel Low tightening torque Tight seal
CONVEYOR COMPONENTS & ACCESSORIES
STION 28 - ONVYOR OMPONNTS & SSORIS ONVYOR OMPONNTS & SSORIS ipod, Tripod & ross ases... 28-3 Side Guides... 28-9 Joints & Supports... 28-4 onveyor Tube... 28-10 lamps & Rods... 28-5 to 28-8 Mounting rackets...
Pin and socket connectors
All-rubber connectors with earthing contact ( Schuko ) All-rubber connectors with earthing contact water proof ( Schuko-WD ) All-rubber CEE connectors All-rubber reducers All-rubber earthing schuko connectors
Installation Instructions for Replacement Mechanism Kit
s Siemens Industry,Inc. Item: Replacement Switch Kit Catalog Numbers HM6123 & HM6123S For use with: 30-100 Amp VBII Safety Switches Page 1 of 5 SAFETY INSTRUCTIONS NOTE: This instruction outlines the recommended
PT9420. Heavy Industrial mA, mA ma*
PT9 Heavy Industrial...m, 0...m bsolute Linear Position to 550 inches (100 cm) luminum or Stainless Steel Enclosure Options VLS Option To Prevent Free-Release Damage IP68 NEM 6 Protection Hazardous rea
RETRO SOLUTIONS PRODUCT CATALOG
RETRO SOLUTIONS PRODUCT CATALOG 4634 S. Presa Street, San Antonio, TX 78223 Phone 210-533-1231 Fax 210-533-2211 www.southernfolger.com See who we are. See all we do. T A B L E O F C O N T E N T S RETRO
LOCKNETICS Power Supplies. 510 Series Power Supply Controller 12 and 24 VDC. 505 Series Power Supply. 505DE Series Delayed Egress Controller
505 Series Low voltage DC, regulated, filtered. Step down transformer, fused primary and 6 heavy duty 505 shown with SBP2 KLC screw terminals. 12 VDC - 1 Amp, 24 VDC - 1 Amp, field selectable. Battery
Disconnect Enclosures
Wall-Mount Enclosures Type 12 Flange-Mount....................................................................... 296-298 Wall-Mount Enclosures Type 4 & 4X Premier Series 2-Point or 3-Point Locking..........................
Cable & Wire Management
able & ire Management able & ire Management Lay-In ireway Type 1 Screw over... 8-14 Lay-In ireway Type 1 Quick-onnect inge over... 15-20 Lay-In ireway Type 3R EnviroShield... 21-24 Lay-In ireway Type 12...
FH Fan-Coil Units Low-Profile, Horizontal
FH Fan-oil Units Low-Profile, Horizontal FH Fan-oil Units: Innovative design simplifies installation and service Owners HRI Standard 440-certifi cation ensures exacting performance. The FH fan-coil unit
CLASSEQ LTD. Spares manual P500 AS
CLASSEQ LTD Spares manual P500 AS Spares manual 09/10/2018 Spares manual Page 2 P500 AS Table of contents for P500 AS 1. Machine assembly... 4 2. Front panel assembly... 6 3. Front Panel... 8 4. Control
Model 10 Crossing Signal
1-39 Model Crossing Signal 1-40 Model Gate Crossing Signal For use with Cantilever Flashing Light Structures, or as a Sidewalk Gate 1-41 Mechanism Support for Model Gate Signals Cast Mechanism Support
Environment-Sealed Basic Switches
HoneywellSensing and Control 1-800-537-6945 USA 1-815-235-6847International 1-416-293-8111Canada 13 Environment-Sealed Basic Switches GENERAL INFORMATION SE and XE switches are the smallest environment-sealed
Mounting Components. Accumulator Catalog. Mounting Components. HS - Regular Duty Clamp. Function. HSS - Heavy Duty Clamp. Types. KBK - Base Bracket
Mounting omponents Mounting omponents Y mounting components are used to mount all types of hydropneumatic accumulators safely and simply, regardless of the mounting position. Our wide range includes suitable
R-Rated medium voltage fuses for motor circuit protection
Technical ata 6001 Supersedes September 2017 Features and benefits escription: Indoor/enclosure, R-Rated medium voltage, current-limiting fuses for motor circuit protection. urrent-limiting R-Rated fuses
Worm Gear Hand Winches Up to 4000 lb capacity
IO 900 ertified Worm Gear and Winches Up to 4000 lb capacity achine ut Worm Gears provide accurate operation and long lasting service. nclosed Oil ath provides continuous lubrication of gears to minimize
ADEX Series. Air Control Valves. Section D
X Series ir ontrol alves 00.0 v.8 v.47 v ort 5 ort /8" ort Section www.parker.com/pneu/adex X iking Z asic alve unctions...00 asic alve eatures...0 ommon art umbers / R Type alves...02 odel umber Index