* Please mention "Code Number" upon your order.

Size: px

Start display at page:

Download "* Please mention "Code Number" upon your order."

Sara Lynn Shields
6 years ago
Views:

1 BRUSHLESS MOTOR & SPINDLE FOR Series Please mention " Number" upon your orer. '...A PRK25E Ver.

E25 SERIES Ultra Precision Excellent urability an high rigiity are obtaine using a highspee brushless motor. Designe for high spee milling an rilling, etc on CNC lathes an special purpose machines.

2 E25 SERIES Ultra Precision Excellent urability an high rigiity are obtaine using a highspee brushless motor. Designe for high spee milling an rilling, etc on CNC lathes an special purpose machines. Moular Type Spinle Designe for high spee milling an rilling, etc on CNC lathes an special purpose machines. Free to connect the spinle to the motor for applications Easy to exchange for repairs Characteristics Graph Output : Output means that the working capacity by the brushless motor. Output epens on Motor Spee an. : Maximum means the torque by the combination of the controller & the brushless motor. Stop the motor when loaing the motor over the maximum torque. Continuous Duty Area : Rating means the torque by the brushless motor continuously. The torque area from the rating power to the maximum power means that the torque by the brushless motor intermittently. Grinstone Axis AGM Chuck Nut K265 CHK Group ø.5~6.5mm Axis for Metal Saw KCH Moular Type,min,min Spinle NR Spinle NR Spinle Motor 6 2,min Angle Spinle (Moular Type) Capable of working on corners ifficult to work with straight type an rilling an milling on sie face. Three type Angle Hea Sizes available. (cn.m) Output Intermittent Duty Area Continuous Duty Area 2 Spee ( x min ) Output (W) Grinstone Flange NGF29 CHM Group ø.~.75mm Grinstone Axis AGM CH8 Group ø.8~.75mm Axis for Metal Saw KCH2 CHS Group ø.8~.75mm Chuck Nut K265 CHK Group ø.5~6.5mm Axis for Metal Saw KCH,min 7,49min,min 7,49min Spinle NR Slim Neck Spinle AMH 9º Angle Spinle RA ( / Reuction) 9º Angle Spinle RA2 (/.5 Reuction) 9º Angle Spinle RAS ( / Reuction) 5,min ~,min (Cor with Quick Disconnect) EM255J4 7,65min ( ),94min ( ),min ( 2) Spee Reucer ARG (/.92 Reuction),min ( 2) Spee Reucer ARG2 (/5.9 Reuction) Controller E25 5V 2V Air Line Kit ALC24 Cooleair is supplie. Compressor Grinstone Axis AGM P. Straight Spinle (Moular Type) Suitable for small iameter milling & rilling, slitting, chamfer an grining operation., Special Axis Refer to P. Do not excee the maximum motor spee recommenation for the spinles. Excess spee will ramatically reuce bearing life. : Maximum rotating spee. 2 : spee for the spinle. Please refer to the concerne prouct introuction page about the etails. P. 2

E25 SERIES SPINDLE BRUSHLESS MOTOR & SPINDLE (Moular Type) Straight Spinle Outsie Diameter Max.,min 25W ø22.8 ø25 EM255J4 Refer to P.7 ø5.9 5 Max. Tool Mounting Depth 6.

3 E25 SERIES SPINDLE BRUSHLESS MOTOR & SPINDLE (Moular Type) Straight Spinle Outsie Diameter Max.,min 25W ø22.8 ø25 EM255J4 Refer to P.7 ø5.9 5 Max. Tool Mounting Depth 6.9 Spinle < Ceramic Bearings > NR Recommene Clamping Area NR25 EM255J4 ø22.8. Allowable Motor Spee,min (Motor Spee) Spinle Runout Within µm No. 822 Moel NR25 ø.5~ø6.5mm ø.mm (CHK.) Chuck Nut (K265) Spanner (2 x 4) : 2pcs., (2 x 24) : pc. 25g : ø.5~ø6.5mm See Page for etails Metal Saw Axis (KCH) Grinstone Axis (AGM) : For ø6. (I.D.) x ømm () : For grining wheel with I.D. of ø5.mm : Max. ø6.5mm CHK. Refer to P. Other collet sizes are available. Straight Spinle NR Do not excee the allowable motor spee for the spinle. E25 Controller (cn.m) Refer to P.8 Characteristics of EM255J Output 4 8 Intermittent Duty Area Continuous Duty Area 2 2 Spee ( x min ) Output (W) ø5. ø2.4 ø5.9 Spinle NR Marke specs is change from NR. 5Max. Tool Mounting Depth Recommene Clamping Area ø22.8. Allowable Motor Spee,min (Motor Spee) Spinle Runout Within 2 µm No. 25 Moel NR ø.5~ø6.5mm ø.mm (CHK.) Chuck Nut (K265) Spanner (2 x 4) : 2pc., (2 x 24) : pc. 7g : ø.5~ø6.5mm See Page for etails Metal Saw Axis (KCH) Grinstone Flange (NGF29) : For ø6. (I.D.) x ømm () : ø9.5 (I.D.) x ø4 () x 7(W) mm NR EM255J4 ø5.9 Spinle NR 5 Max. Tool Mounting Depth Recommene Clamping Area NR EM255J4 ø22.8. Allowable Motor Spee,min (Motor Spee) Spinle Runout Within 2 µm No. 8 Moel NR ø.5~ø6.5mm ø.mm (CHK.) Chuck Nut (K265) Spanner (2 x 4) : 2pcs., (2 x 24) : pc. 25g : ø.5~ø6.5mm See Page for etails Metal Saw Axis (KCH) Grinstone Axis (AGM) : For ø6. (I.D.) x ømm () : For grining wheel with I.D. of ø5.mm ø ø8 Spinle AMH Max. Tool Mounting Depth Recommene Clamping Area ø22.8. Allowable Motor Spee,min (Motor Spee) ø.mm (CHM.) ø.~ø.75mm (CHM Group) No. 74 Moel AMH Spanner (7 x 5.), (6 x 4.5), (2 x 24) : pc. each 7g (CHM Group) : ø.~ø.75mm See Page for etails Grinstone Axis (AGM) : For grining wheel with I.D. of ø5.mm AMH EM255J4 P. Please mention " Number" upon your orer. P. 4

E25 SERIES SPINDLE When using an angle type spinle or a spee reucer, o not excee the maximum motor spee or the maximum rotating spee at the reucer for the spinle an the reucer.

7 27 Recommene Clamping Area Reuction.5 Maximum rotating spee, min Max. Rotating Spee at The Cutting Tool Reuction Max. Allowable Motor Spee for The Spinle,min ø22.8. spee for the spinle 2, min.

75 Moel RA2 (CHS Group) : ø.8~ø.75mm See Page for etails 2 Max. Tool Mounting Depth 8.2 4. 2 ø9 8.2 4. CH8. ø22.8 8.4 49.

Set the allowable motor spee for the spinle by the Parameter Setting with the E25 Controller. 9 Angle Spinle RA Reuction Refer to P. Angle Spinle Select Sheet Moel RA RA2 RAS Angle Hea Size ø7.

4 E25 SERIES SPINDLE When using an angle type spinle or a spee reucer, o not excee the maximum motor spee or the maximum rotating spee at the reucer for the spinle an the reucer. BRUSHLESS MOTOR & SPINDLE (Moular Type) Angle Spinle Outsie Diameter Max. 7,49min (RA) 25W ø22.8 ø25 EM255J4 Refer to P.7 Max. Tool Mounting Depth ø7.9 9 Angle Spinle RA2 ø Recommene Clamping Area Reuction.5 Maximum rotating spee, min Max. Rotating Spee at The Cutting Tool Reuction Max. Allowable Motor Spee for The Spinle,min ø22.8. spee for the spinle 2, min.5 2,min (Allowable Rotating Spee) ø.mm (CHS.) Spanner (7 x 5.), (8 x 5), (2 x 24) : pc. each RA2 EM255J4 ø.8~ø.75mm (CHS Group) 65g Maximum rotating spee for the reuction ratio No. 75 Moel RA2 (CHS Group) : ø.8~ø.75mm See Page for etails 2 Max. Tool Mounting Depth ø CH8. ø Recommene Clamping Area Maximum rotating spee 7,49 min 9 Angle Spinle RA : Max. ø.75mm Do not excee the allowable motor spee for the spinle. Set the allowable motor spee for the spinle by the Parameter Setting with the E25 Controller. 9 Angle Spinle RA Reuction Refer to P. Angle Spinle Select Sheet Moel RA RA2 RAS Angle Hea Size ø7.4mm Max. Rotating Spee at The Cutting Tool Using Tools Max. Rotating Spee at The Cutting Tool Reuction Max. Allowable Motor Spee for The Spinle 7,49min ø22.8. spee for the spinle 2, min 2,min (Allowable Rotating Spee) No. 24 Moel RA ø.mm (CH8.) Spanner (7 x 5.5), (8 x 5), (2 x 24) : pc. each ø.8~ø.75mm (CH8 Group) 27g (CH8 Group) : ø.8~ø.75mm See Page for etails Metal Saw Axis (KCH2) E25 Controller Refer to P.8 7,49min,min 7,49min ø.8~ø.75mm ø.5~ø6.5mm Maximum rotating spee for the reuction ratio : For ø6. (I.D.) x ømm () ø22.8. ø5.9 9 Angle Spinle RAS 5 Max. Tool Mounting Depth 6.9 Maximum rotating spee 7,49 min Recommene Clamping Area Reuction spee for the spinle 2, min Max. Rotating Spee at The Cutting Tool 7,49min 75 4 ø Reuction Max. Allowable Motor Spee for The Spinle Spinle Runout 2,min (Allowable Rotating Spee) RAS Within 2 µm No. 94 Moel RAS ø.mm (CHK.) Chuck Nut (K265) Spanner (2 x 4) : 2pcs., (2 x 24) : pc. EM255J4 ø.5~ø6.5mm 25g : ø.5~ø6.5mm See Page for etails Metal Saw Axis (KCH) Grinstone Axis (AGM) Maximum rotating spee for the reuction ratio : For ø6. (I.D.) x ømm () : For grining wheel with I.D. of ø5.mm 48. RA EM255J4 P. 5 Please mention " Number" upon your orer. P. 6

E25 SERIES MOTOR, SPEED REDUCER, CONTROLLER When using an angle type spinle or a spee reucer, o not excee the maximum motor spee or the maximum rotating spee at the reucer for the spinle an the

5 E25 SERIES MOTOR, SPEED REDUCER, CONTROLLER When using an angle type spinle or a spee reucer, o not excee the maximum motor spee or the maximum rotating spee at the reucer for the spinle an the reucer. ø25. (Cor with Quick Disconnect) EM255 J4 Characteristics of EM255J4 (cn.m) Output 2 Spee ( x min ) Intermittent Duty Area Continuous Duty Area Output (W).4 ø25mm No. 8 Moel EM255J4 Cor with Quick Disconnect Air Coolant Hose Reucer Spanner (22 x 27) : pc. Cor 25W Air Coolant Hose 5,~,min : Length 4m : Length 4m Motor Spee. m.7 m 25g (w/o Cor) Loa LED : Continuous loa area : Intermittent loa area LOAD : Overloa 25W HighPerformance Electric Circuit High grae feeback loop to maintain constant spinle spee even if loa is varie, an Gentle start/quick stop functions are provie. Motor Spee Display Motor spee is isplaye precisely an igitally. Loa Meter E25 Controller Cooleair is supplie (.25~.MPa) Rating Power Consumption 92W Motor Spee 5,~,min.6kg Warning / Error Function Motor/Spinle is stoppe safety, Warning/Error LED is lit, an Warning/Error Signal is output to external when there is something wrong with the motor/spinle, or any breakage is etecte. Warning : Air shortage Overloa operation Motor cor isconnection an etc. Error : Internal Circuit Error Voltage/Electric currency Error Overheat/Overloa operation Operation Error Air shortage Locke Motor an others (Total items) External Input / Output Control Signal Operation External Input Motor Rotating / Stoppe Error Release Rotating Direction Motor Spee Setting an etc. Parameter Setting Maximum motor spee setting Fix the motor spee External Monitor Motor Current Error Warning Rotating pulse an etc. Spee Reucer (/.92) ARG ø Max. Rotating Spee at The Cutting Tool 7,65min NR Reuction.92 No. 22 Moel ARG ARG EM255J4 Max. Allowable Motor Spee for The Spinle,min (Allowable Rotating Spee) 8g Maximum rotating spee for the reuction ratio Air Line Kit ALC24 Plug Type Plug Type For 5V (B type) For 2V (D type) Refer to p9 No. 862 No. 864 A type an C type are also available. Prouct E25 Controller < Specifications > Power Source : AC 5V. 2V 5/6Hz SinglePhase (Switchable type) Rating Power Consumption : 92W :.6kg Dimensions : W8 x D56 x H75mm Power Cor Air Hose with filter (K25) : ø6mm x 2m Bracket (2pcs.) Connector Cap Power Cor Grip Air Plug Screw (7pcs.) Reuction Maximum rotating spee.92 7,65 min spee for the spinle, min Mounting Bracket Automatic Control System Chart Single Motor Spinle Operation Air Compressor Spee Reucer (/5.9) ARG2 ø22.8. Maximum rotating spee,94 min 56. Reuction 5.9 spee for the spinle, min Max. Rotating Spee at The Cutting Tool,94min NR ARG2 Reuction 5.9 No. 2 Moel ARG2 EM255J4 Max. Allowable Motor Spee for The Spinle,min (Allowable Rotating Spee) 48g Maximum rotating spee for the reuction ratio Bottom Mounting Back Mounting Spinle Power Source Plug Motor Motor Cor Air E25 Controller ON/OFF R/L Plug Type Main Usable Area Prouct For V (A type) For 5V (B type) For 2V (C type) For 2V (D type) For Japan For U.S.A. an Canaa Without Plug For Europe Sequence P. 7 Please mention " Number" upon your orer. P. 8

E25 SERIES SPINDLE AIR LINE KIT, PARTS Air Line Kit ALC24 (For ø6mm Hose) 22 2 PF/4 7 2 2 9 2 ø7 The ALC24 Air Line Kit is a clean an ry cooling air supply unit to motor spinle via Controller.

6 E25 SERIES SPINDLE AIR LINE KIT, PARTS Air Line Kit ALC24 (For ø6mm Hose) 22 2 PF/ ø7 The ALC24 Air Line Kit is a clean an ry cooling air supply unit to motor spinle via Controller. Dust an moisture in the compresse air are caught by Air Filter an then the cleane air is ajuste proper air pressure to the motor spinle by Air Regulator. Filter Mesh. µm No. 454 Moel ALC24 < Accessories > Hose pipe (K275) : 2m Special Axis Grinstone Axis Prouct Insie Diameter : ø 56 Special Drill Chuck Axis For Drill Chuck Jacob's Taper No. Runout Accuracy : Within.5 mm ø5 ø ø5. ø6. ø8. ø5. ø6. ø8. Special Metal Saw Axis Dimensions of Metal Saw ø (I.D) x ø () mm Runout Accuracy : Within.2 mm Special Metal Saw Axis Dimensions of Metal Saw ø (I.D) x ø () mm Runout Accuracy : Within.2 mm Grinstone Axis Runout Accuracy : Within.2 mm For Grinstone with ø5. mm I.D. Grinstone Axis Runout Accuracy : Within.2 mm For Grinstone with ø5. mm I.D. Fit to : For right han (cw) rotation only. Moel No. NR25, NR, NR, RAS DCHJK 22 RA NR25, NR, NR, RAS AMH NR25, NR, RAS KCH2 (5.) KCH2 (6.) KCH2 (8.) KCH (5.) KCH (6.) KCH (8.) AGM AGM Bush 2 Prouct Description I.D. Fit to Moel No. Chuck Nut 87 ø.5 Moel : Prouct 2 CHK., CHK., CHK.AA, CHK.75, CHK.75AA, CHK4., CHK4.AA, CHK6., CHK6.AA, CHK6.5, CHK6.5AA 2 ø2.5 ø. ø.75 ø4. ø6. ø6.5 Insie Diameter : ø ø.5, ø.6, ø.7, ø.8, ø.9 ø., ø.5, ø2., ø2.5, ø.5, ø4.5, ø4.76, ø5.5 ø., ø.2, ø., ø.4, ø.7, ø.8, ø.9 ø2., ø2.2, ø2., ø2.4, ø2.6, ø2.7, ø2.8, ø2.9 ø., ø.2, ø., ø.4, ø.6, ø.7, ø.8, ø.9 ø4., ø4.2, ø4., ø4.4, ø4.6, ø4.7, ø4.8, ø4.9 ø5., ø5.2, ø5., ø5.4, ø5.6, ø5.7, ø5.8, ø5.9 Fit to NR25, NR, NR RAS High precision type Moel CHK2.5 CHK. CHK.75 CHK4. CHK6. CHK6.5 CHK[][] No ø.5 Moel : Besies the above CHK Group CHM Group ø.6, ø5. ø.aa ø2.5 ø. ø.75 ø.6 ø.8, ø.9 RA2 CHK.AA 9597 ø.75aa CHK.75AA 9598 ø4.aa CHK4.AA 9599 ø6.aa CHK6.AA 96 ø6.5aa CHK6.5AA 96 ø2.5 ø. ø.75 ø.6 ø., ø2. AMH CHM2.5 CHM. CHM.75 CHM.6 CHM[][] CHS2.5 CHS. CHS.75 CHS CHS Group ø., ø2., ø2.5 ø., ø.2, ø., ø.4, ø.5, ø.7, ø.8, ø.9 ø2., ø2.2, ø2., ø2.4, ø2.6, ø2.7, ø2.8, ø2.9 CHS[][] 4.4 ø2.5 ø. ø.75 ø.8, ø.9 RA CH82.5 CH8. CH CH8 Group ø., ø.5, ø2., ø2.5 ø., ø.2, ø., ø.4, ø.6, ø.7, ø.8, ø.9 ø2., ø2.2, ø2., ø2.4, ø2.6, ø2.7, ø2.8, ø2.9 CH8[][] 2.5 P. 9 ø5.9 Chuck Nut for (CHK) NR25, NR, NR, RAS K Please mention " Number" upon your orer. P.

E3000 Series. Electric System. ø1.18", ø0.98", ø0.79" ø1.18", ø1.0", ø0.98", ø0.897" ø1.97", ø1.18" 7 TECHNICAL DATA 8 APPLICATION EXAMPLES

E3000 Series. Electric System. ø1.18, ø0.98, ø0.79 ø1.18, ø1.0, ø0.98, ø0.897 ø1.97, ø1.18 7 TECHNICAL DATA 8 APPLICATION EXAMPLES NC / CNC LATHE & AUTOTION SOLUTIONS Series Electric System,~, min - (rpm) One Piece Type Outsie Diameter Moular Type Outsie Diameter,, ø.9" (ø,, mm),,, (ø,.,,. mm) ispee / / -,rpm E ø." ø.9" ø." ø.9",~,