Power and Precision in Perfect harmony. Industrial tools from Fuji. Japanese eco-quality since 1943

Transcription

1 Power n Precision in Perfect hrmony Inustril tools from Fuji Jpnese eco-qulity since 1943

2 Power n Precision in Perfect hrmony Inustril tools from Fuji For over sixty yers, the nme Fuji hs been synonymous with performnce, relibility n qulity in inustril tools. Behin this reputtion lies eeply roote corporte philosophy built on continuous lerning, customer service n kizen. These precepts gurntee tht every Fuji tool, from the simplest to the most sophisticte, performs its tsk in perfect hrmony with the opertor n the inustril process. They lso enble us to offer one of the most extensive, most cost-effective rnges of high qulity inustril ir tools vilble toy. Jpnese eco-qulity since 1943

3

4

5

6 1) Number Use this moel number when orering. 2) Bolt, Cpcity Shows the cpcity, which the tool cn hnle, s guince for tool selection. The bolt size of fstening tool is bolt size which the tool my fsten. The cpcities shown in this ctlogue tpping cpcity, riveting cpcity, etc. show the size which the tool my hnle. Be wre, tht the cpcity my vry epening on such conitions s the tension, joint rte, mteril, etc. of the work. 3) Recommene Torque Rnge, Mx Torque Shows recommene torque rnge or mx torque of the moel. Torque figures in the specifictions must be use s guince only, s finl output epens on type n size of fstener, joint rte n ir pressure etc. 4) Spee spee is inicte in revolutions per minute, min -1 t which the tool runs t no lo t the working ir pressure of 0.63MP, 6.3br, 90psi if not otherwise specifie. 5) Overll Length Shows the longest prt of the tool without ccessories ttche. Refer to the lst prt of this ctlogue "Dimensions" if the etils of imensions re necessry. 6) Mss Shows the mss of the tool without ccessories. 7) Squre Drive, Bit Shnk Squre rive size shows the squre size of the spinle or nvil of pulse wrenches n impct wrenches. Bit shnk size inictes the bit shnk size of the river nvil of screw rivers. 8) Hex. Socket Shows stnr hexgonl size of the socket of the rtchet wrenches. 9) Air Inlet Thre Femle three BSP n NPT ( Ntionl Pipe Thres ) re vilble. 10) Air Hose The ir hose size inictes recommene minimum hose insie imeter which is necessry to supply enough volume of ir to the tool for esigne performnce. 11) Air Consumption The ir consumption of the tools is stte in m 3 /min, cubic meters per minute. It inictes the mximum ir consumption t the working ir pressure 0.63MP, 6.3br, 90psi if not otherwise stte. Mximum ir consumption is vli for the tool without spee governor when the tool is running t no lo. Length 1 m =1000 mm =39.4 in =3.28 ft Dimeter, With, Depth, Height 1 in =25.4 mm = m = ft Thickness, Lift, 1 cm =10 mm =0.394 in Sie to Center 1 ft =12 in = m =304.8 mm Cpcity Stroke Mss 1 kg =1000 g = lb 1 lb = kg Torque 1 N m = ft lb =0.102 kgf m Recommene Torque Rnge 1 kgf m =9.807 N m =7.233 ft lb Mx. Torque, Mesuring Rnge 1 ft lb = N m =0.138 kgf m Stll Torque, Strting Torque Force 1 N =0.102 kgf =0.225 lbf Lifting Cpcity 1 kgf =9.807 N =0.205 lbf 1 lbf =4.448 N =0.454 kgf 1kN =1000 N =102 kgf Pressure 1 P =1 N/m 2 Air Pressure 1 br =100 kp =0.1 MP = kgf/cm 2 Vcuum Degree 1 MP =10.2kfg/cm 2 =10 br 1 kp =0.01 br = kp/cm 2 =7.5 mmhg 1 kp/cm 2 =98.07 kp Power 1 W =0.102 kgf m/s =0.738 ft lb/s Power Consumption 1 W =1 J/s =1 N m/s =1VA Motor Output, Horse Power 1kgf m/s =9.807 W = PS =7.233 ft lb/s 1 PS =75 kgf m/s = kw 1 kw =1000 W Volume 1 m 3 =35.3 ft 3 1 m 3 =1000 =1 k 1 =1000 cm 3 =0.001 m 3 1 ft 3 =28.3 Flow Rte 1 m 3 /s =60 m 3 /min Mx. Air Consumption 1 m 3 /min =35.3 ft 3 /min Dischrge Volume 1 m 3 /h = /min = /s Dischrge Cpcity 1 m 3 /min = /s 1 /s = cfm 1 cfm = /s Velocity 1 m/s =3.28 ft/s =3.6km/h =60 m/min Rope Spee, Lifting Spee 1 ft/s = m/s = km/h Propelling Spee 1 km/h =0.278 m/s =0.911 ft/s Rottionl Frequency 1 s -1 =60 rpm Spee, Pinion Spee 1 min -1 =1 rpm =Peripherl Spee (m/min) x 1000 Mesuring Rnge x Wheel Dimeter (mm) ( =3.14) Frequency 1 Hz =60 bpm =60 spm Blow, Stroke per minute 1 khz =1000 Hz

7

8 TIGHTENING TORQUE (N.m) This tble shows the recommene tightening torque for common bolt size M2 to M48. Bolt Bolt Gre mm M M M M M M M M M M Bolt Bolt Gre mm M M M M M M M M M M ccoring to ISO898/1 RECOMMENDED TORQUE RANGE The torque requirement is one of the mjor fctors to be consiere when selecting fstening tools. The following grphic presenttion shows the recommene torque rnge of our ssembly tools. This is to be use for guince only s finl torque my vry epening on the type n size of the fstener, the joint rte, ir pressure, etc. Optimum performnce is chieve t the mi rnge of the tool's torque cpbility. PULSE WRENCHES SHUT-OFF TYPE BOLT GRADE t 8.8 SQUARE DRIVE TYPE FPT FLT-4-1 FLT-5-1 FLT-6-1 FLT-7-1 FLT-9-1 FLT-11-1 FLT-13-1 FLT-20S-1 FPT BIT SHANK TYPE FPT-110D-1,10 FPT330D-1, 10 FPT440D-1, 10 FLT-4D-1 FLT-4D-10 FLT-5D-1 FLT-5D-10 FLT-6D-1 FLT-6D-10 STRAIGHT-SQUARE DRIVE FPT-110S-1 FPT-330S-1 FPT-440S-1 FPT-550S-1 FPT-660S-1 FPT-770S-1 STRAIGHT-BIT CHANGE FPT-110SD-1,10 FPT-330SD-1,10 FPT-440SD-1,10 FPT-550SD-1,10 FPT-660SD-1,10 ANGLE SQUARE DRIVE FPT-440SC-1 FPT-550SC-1 FPT-660SC-1 FPT-770SC-1 GEARED-HEX SOCKET FPT-770SCG Torque (N.m)

9 M4 M5 M6 M8 M10 M12 M14 M16 M18 M20 BOLT GRADE t 8.8 PISTOL-SQUARE DRIVE FPW FL-4-1 FL-5-1 FL-6-1 FL-7-1 FL-9-1 FL-11-1 FL-13-1 FPW STRAIGHT-SQUARE DRIVE FPW-2220S-1 FPW-110S-1 FPW-330S-1 FPW-440S-1 FPW-550S-1 FPW-660S-1 FPW-770S-1 PISTOL-BIT SHANK FPW-110D-1,10 FL-4D-1,10 FL-5D-1,10 FL-6D-1,10 STRAIGHT-BIT SHANK FPW-110SD-1,10 FPW-330SD-1,10 FPW-440SD-1,10 FPW-550SD-1,10 FPW-660SD-1,10 ANGLE-SQUARE DRIVE FPW-440SC-1 FPW-550SC-1 FPW-660SC-1 FPW-770SC-1 GEARED-HEX SOCKET FPW-770SCG PULSE WRENCHES 500 Torque (N.m) IMPACT WRENCHES M6 M8 M10 M12 M14 M16 BOLT GRADE t 8.8 STRAIGHT FW-44SA-1 FW-6SX-6 FW-6SX-5 FW-66SA-1 FW-8SH-2 FW-10SX-5 FW-14SX-5 ANGLE FW-6SCX-6 FW-8SCH-2 PISTOL GRIP FW-44PA-2 FW-5PX-6 FW-6PX-6 FW-6PX-5 FW-66PA-2 FW-6PM-1 FW-6PL-1 FW-6PH-1,11 FW-88P-1 FW-8PH-3 FW-10PH-2 FW-10PX-5 FW-10PH-1 FW-14PH-2,3 FW-14PX-5 FW-14PH Torque (N.m) Torque rnge shoul be use for guince only s finl torque my vry epening on the type n size of fstener, the joint rte, ir pressure etc. Optimum performnce is chieve t the mi rnge of the tool's torque cpbility.

10 IMPACT WRENCHES BOLT GRADE t 8.8 FW-19Z-5,5C,19PX-5 FW-250-1C,2C,250P-1,2 FW-320-1C,1CL, 320P-1 FW-420-1C,1L,2C LARGE IMPACT WRENCHES BOLT GRADE t 8.8 M16 M18 M20 M22 M24 M27 M30 M36 M Torque (N.m) M42 M45 M48 FW-50-7 FW-75-7 FW Torque (N.m) SCREW DRIVERS BOLT GRADE t 8.8 M3 M4 M5 M6 M8 M10 PISTOL GRIP FD-4P FD-5P FW-5PXD-6,60 FW-44PAD-2,20 FW-6PXD-6,60 FW-66PAD-2,20 FW-6PMD-1,10 FW-6PLD-1 FW-6PHD-1 STRAIGHT FD-4 FD-5 FW-5SXD-7,70 FW-5SXD-8,80 FW-44SAD-1,10 FW-6SXD-6,60 FW-66SAD-1, Torque (N.m) Torque rnge shoul be use for guince only s finl torque my vry epening on the type n size of the fstener, the joint rte, ir pressure, etc. Optimum performnce is chieve t the mi rnge of the tool's torque cpbility. The Fuji oil filler is the iel, n inispensble, equipment require for mintennce n repir of pulse wrenches. By connecting conventionl ir supply to the hnle vlve, the oil filler mkes re-filling the pulse unit ssembly quick n esy. Hnle Vlve OFF IN ON Vcuum Pressure Guge FVT-1 Li Spinle 10mm more 220 Stn Oil Pulse Ass'y 214

11 1 EXHAUST WITH A MUFFLER Our originl built-in, swivel type, exhust muffler is esigne to reuce the noise level of the tool. The opertor cn lso select suitble irection of the exhust ir to minimise the risk of blowing ny ust or ebris in to the locl work environment. All WRENCHES EXCEPT FW-6PL, 6PLD, 5SXD-8, 80, FD-4, 5, 4P, 5P 2 TWO STAGE / SQUEEZING TYPE THROTTLE VALVE MECHANISM The two stge / squeeze type throttle enbles the opertor to strt the tool slowly n increse to full spee to i loction of the fstening t the strt of the cycle. TWO STAGE TYPE : FPT, FPW, FW-6PM, 44P~88P SQUEEZING TYPE : FPT-*S, FPW-*S, FW-44S~66S, FOW, FRW 3 REVERSE VALVE LEVER All moels feture reversible motor. The opertor cn esily n quickly select the irection of rottion simply by turning or sliing the reverse ctutor. REAR EXHAUST MUFFLER FRONT EXHAUST FPW-2220S, FW-19Z, 250~420, FW-50, 75, 100 FPW pistol, stright ALL WRENCHES EXCEPT FOW, FRW FW pistol, stright 4 AIR REGULATOR To ccommote torque justment, the built in ir regultor is use to regulte the ir flow. FW-6SX, 8SH, 10SX, 14SX, 6SCX, 8SCH, 50~100 FW-6PX, 10PX, 14PX, 19Z, 420 SERIES 5 SQUARE DRIVE ANVIL Two types of squre rive nvils re vilble. As our stnr for overses, the moels lrger thn 25.4 mm (1 inch) squre rive re supplie with P nvil (Pin hole retiner type) n the moels smller thn 19 mm (3/4 inch) squre rive re supplie with BF nvil (Flt button retiner type). Smll moels cn be supplie with P nvil on your request. ALL WRENCHES WITH SQUARE DRIVE ANVIL P ANVIL BF ANVIL 6 BIT SHANK TYPE ANVIL FOR SCREW DRIVERS Two types of quick-chnge bit shnk type nvils re vilble. Both re for 6.35 mm(1/4 inch) hex river bit, but ivie into two moel groups ccoring to the bit neck size. ALL SCREW DRIVERS (1) GROUPS (2) GROUPS 7 CLUTCH MECHANISM-IMPACT WRENCHES AND DRIVERS 1) DOUBLE CLUTCH TYPE The impct force is blnce with less torque rection ue to two impcts me per revolution. The ouble clutch type impct wrenches n rivers benefit from less vibrtion n longer service life thn conventionl single clutch moels. Anvil Clutch Pin Clutch Frme Cm Hmmer Clutch

12 2) SINGLE CLUTCH TYPE The impct force is hrer n torque/weight rtio is better thn the ouble clutch type. Single clutch type moels re suitble for hr "pull-up" fstening opertions for mintennce & service pplictions. FW-6PX, 6SX-5, 10PX, 10SX-5, 14PX, 14SX-5, 19Z, 19PX-5, 5C 3) 2-JAW ONE-DOG CLUTCH TYPE The Fuji 2-Jw clutch impct wrenches generte very high torque/weight. These types of tool re most suite for tightening previling torque bolts n for removing corroe fsteners. FW-250, 320, 420 SERIES 8 HANDLE PROTECTOR Clutch Pin Hmmer Clutch Anvil Spring Anvil Hmmer Clutch Cm Clutch Frme Cm Clutch Shft Ergonomiclly esigne hnle protectors provie reuce vibrtion, increse opertor comfort n insulte the hn from the col temperture generte by compresse ir. PISTOL GRIP MODELS : FPT, FPW, FW-6PM, 44P~88P 9 DUAL CHAMBER MOTOR All Fuji pulse wrench moels (FPT & FPW) n the new series of impct wrenches (FW-44~88) re built with 9-ble, ul chmber motor. This motor is esigne to provie high torque t low spee, giving the best chrcteristics for fst relible n ccurte tightening. CROSS SECTION Dul Chmber Motor Outlet Inlet EFFICIENCY COMPARISON Dul Chmber Motor Conventionl Motor Air Motor Torque in Pulsing Inlet Outlet Single Chmber Motor Outlet Inlet Torque(T) High Spee High Torque Opertion for Super Prouctivity n<n n<n Air Motor Spee in Pulsing Spee(min -1 ) 10 2-BLADE PULSE UNIT As the pulsing cycle is very short, there is lmost no torque rection in the hnle grip (low motor torque only is felt by the opertor). Unlike n impct wrench, the pulse tool hs no "metl to metl" contct n consequently the pulse wrenches provie softer n stble "impulsing". The benefits from this re less vibrtion, lower noise levels n longer service life when compre with conventionl impct wrenches. All pulse wrenches moels (FPT & FPW series) utilise the Fuji ptente 2-ble pulse unit combine with the ul chmber motor. This combintion provies 50% higher power to weight rtio thn comprble fstening tools. For prouctivity, this esign reches torque fster, which is excellent for soft joint or previling torque pplictions with reuce noise n vibrtion levels. IMPULSING CYCLE 2-BLADE PULSE UNIT Controllers / Testers High Pressure 0 Low Pressure R FPT, FPW SERIES Low Pressure Impulsing High Pressure R R R Non-impulsing

13 "FPT n FLT Series" re provie with Fuji ptente originl shut-off control mechnism hving ul chmber motor n 2-ble pulsing mechnism. It is esigne for giving high torque t low spee, which gives the best chrcteristics for fst, relible n ccurte tightening. FPT n FLT Series contribute to high prouctivity, qulity improvement, working environment improvement, n opertor ftigue minimiztion in vrious inustries. SQUARE DRIVE TYPE FPT-110S FPT-330S~660S FPT-770S FLT-4 FLT-5 FLT-6 FPT-1110~1660 s to be operte t ir pressure 0.5MP to 0.6MP (5.0 to 6.3 br) Bolt Recommene Torque Rnge Spee Squre Drive Air Consumption (t Lo) mm N m kgf m ft lb min -1 mm in mm in kg lb m 3 /min ft 3 /min Stright s FPT-110S-1 M4~M5 4~7 0.4~ ~5.2 4, / / FPT-330S-1 M5~M6 6~10 0.6~ ~7.4 4, / / FPT-440S-1 M5~M6 8~13 0.8~ ~9.6 5, / / FPT-550S-1 M6~M8 12~20 1.2~ ~14.8 5, / / FPT-660S-1 M6~M8 20~30 2.0~ ~22.1 5, / / FPT-770S-1 M8~M10 30~45 3.1~ ~33.2 5, / / Pistol Grip s FPT M5~M6 4~7 0.4~ ~5.2 6, / / FLT-4-1 M5~M6 5~12 0.5~ ~8.8 6, / / FLT-5-1 M6~M8 11~24 1.1~ ~17.7 6, / / FLT-6-1 M8~M10 22~35 2.2~ ~25.8 6, / / FLT-7-1 M8~M10 30~60 3.0~ ~44.2 6, / / FLT-9-1 M10 50~85 5.1~ ~62.6 5, / / FLT-11-1 M10~M12 70~ ~ ~95.8 5, / / FLT-13-1 M12~M14 90~ ~ ~118 3, / / FLT-20S-1 M18~M20 200~ ~ ~295 2, / / FPT M16~M18 150~ ~ ~ , / / *Use ll bove moels t MP (5.0 to 6.3 br) ir pressure but FPT-110 series t MP ( br) ir pressure. *Performnce figures re t 0.63 MP (6.3 br) ir pressure. *Air Inlet Thre : BSP or NPT 1/4", (FPT-1660) BSP or NPT 3/8". *Air Hose : (FPT-110S, 330S, 440S, 550S, FLT-4-1, 5-1) 6.3mm (1/4"). (660S, 770S, , FLT-6-1, 7-1, 9-1, 11-1, 13-1) 9.5mm (3/8"), (FLT-20S-1) 12.7mm (1/2"). Overll Length (without socket)

14 BIT SHANK TYPE FPT-110SD FPT-330SD~660SD FLT-4 FLT-5 FLT-6 s to be operte t ir pressure 0.5MP to 0.63MP (5.0 to 6.3 br) Bolt mm Recommene Torque Rnge Spee N m kgf m ft lb min -1 Bit Shnk Overll Length (without socket) Air Consumption (t Lo) mm in mm in kg lb m 3 /min ft 3 /min Stright s FPT-110SD-1(10) M4~M5 4~7 0.4~ ~5.2 4, / / FPT-330SD-1(10) M5~M6 6~10 0.6~ ~7.4 4, / / FPT-440SD-1(10) M5~M6 8~13 0.8~ ~9.6 5, / / FPT-550SD-1(10) M6~M8 12~20 1.2~ ~14.8 5, / / FPT-660SD-1(10) M6~M8 15~28 1.5~ ~20.7 5, / / Pistol Grip s FPT-110D-1(10) M5~M6 4~7 0.4~ ~5.2 6, / / FPT M5~M6 6~11 0.6~ ~8.1 6, / / FPT-440D-1(10) M6 10~16 1.0~ ~11.8 6, / / FLT-4D-1 M6 14~20 1.4~ ~14.7 6, / / FLT-4D-10 M6 14~20 1.4~ ~14.7 6, / / FLT-5D-1 M6~M8 18~32 1.7~ ~23.6 6, / / FLT-5D-10 M6~M8 18~32 1.7~ ~23.6 6, / / FLT-6D-1 M8 25~42 2.5~ ~30.9 6, / / FLT-6D-10 M8 25~42 2.5~ ~30.0 6, / / *Use ll bove moels t MP (5.0 to 6.3 br) ir pressure but FPT-110 series t MP ( br) ir pressure. *Performnce figures re t 0.63 MP (6.3 br) ir pressure. *Air Inlet Thre : or NPT 1/4". *Air Hose : (FPT-110SD, 330SD, 440SD, 550SD, 110D, 330D, FLT-4D-1, 4D-10, 5D-1, 5D-10) 6.3mm (1/4"). (FPT660SD, FLT-6D-1, FLD-6D-10) 9.5mm (3/8"). SQUARE DRIVE TYPE FPT-440SC~660SC FPT-770SC-1 s to be operte t ir pressure 0.5MP to 0.63MP (5.0 to 6.3 br) Bolt mm Recommene Torque Rnge Spee N m kgf m ft lb min -1 Squre Drive Air Consumption (t Lo) mm in mm in kg lb m 3 /min ft 3 /min Angle He s FPT-440SC-1 M5~M6 6~11 0.6~ ~8.1 4, / / FPT-550SC-1 M6 10~17 1.0~ ~12.5 4, / / FPT-660SC-1 M6~M8 15~25 1.5~ ~18.4 4, / / FPT-770SC-1 M8 20~35 2.0~ ~25.8 5, / / *Air Inlet Thre : BSP or NPT 1/4". *Air Hose : 6.3mm (1/4"). (660SC, 770SC) 9.5mm (3/8"). Overll Length (without socket) Bit B A FPT-***SD-1, ***D-1,1L A:9.5mm B:12mm FPT-***SD-10, ***D-10,10L A:13mm B:16mm

15 The Fuji Gere Pulse Wrenches Shut-Off type provies high power in combintion with low noise n vibrtion though the Dul Chmber Air Motor & Ger-rive ngle he. The ergonomic esign reuces the rection forces experience by the opertor throughout the torque rnge. FPT-770SCG-1 s to be operte t ir pressure 0.5MP to 0.63MP (5.0 to 6.3 br) Bolt Recommene Torque Rnge Spee Socket Hex Overll Length Air Consumption (t Lo) mm N m kgf m ft lb min -1 mm in mm in kg lb m 3 /min ft 3 /min mm in FPT-770SCG-1 M6 17~24 1.7~ ~17.7 6, / / /8 *Air Inlet Thre : BSP or NPT 1/4". Air Hose

16 Feture with ul chmber ir motor, FPW n FL series pulse wrenches re esigne to generte higher torque n yet reucing vibrtion, torque rection n noise levels. Combine with 2-ble impulsing mechnism, 9-ble ul chmber motor cretes bout 50% higher power-to-weight rtio thn our former series of the sme physicl size. The reuction of vibrtion n torque rection helps reuce opertor ftigue n other problems ssocite with repete vibrtion or impct motion. SQUARE DRIVE TYPE FPW FL-4 FL-5 FL-6 FPW-1660 Recommene Squre Drive Overll Length Air Consumption Air Hose Bolt Torque Rnge Spee (without socket) (without socket) (t Lo) mm N m kgf m ft lb min -1 mm in mm in kg lb m 3 /min ft 3 /min mm in Pistol Grip s FPW M4~M5 7.5~13 0.8~ ~9.6 (2~7.5) (0.2~0.8) (1.4~5.5) 4, / / /4 FL-4-1 M6 16~24 1.6~ ~17.7 6, / / /4 FL-5-1 M6~M8 20~40 2.0~ ~29.5 6, / / /4 FL-6-1 M8 28~56 2.8~ ~41.3 6, / / /8 FL-7-1 M8~M10 34~60 3.4~ ~44.2 6, / / /8 FL-9-1 M10 52~96 5.3~ ~70.8 5, / / /8 FL-11-1 M10~M12 80~ ~ ~ , / / /8 FL-13-1 M12~M14 120~ ~ ~ , / / /8 FPW M16~M18 160~ ~ ~ , / / /8 *Air Inlet Thre : BSP or NPT 1/4", (FPW-1660)PT or NPT 3/8". *Figures in ( ) cn be obtine t the position of "L" mrk on the regultor knob, but for nother, t "H" mrk. BIT SHANK TYPE FPW-110D-1 FL-.D Recommene Bit Shnk Overll Length Air Consumption Air Hose Bolt Torque Rnge Spee (without socket) (without socket) (t Lo) mm N m kgf m ft lb min -1 mm in mm in kg lb m 3 /min ft 3 /min mm in Pistol Grip s FPW-110D-1 M4~M5 7~11 0.7~ ~8.1 (2~7) (0.2~0.7) (1.4~5.1) 4, / / /4 FPW-110D-10 M4~M5 7~11 0.7~ ~8.1 4, / / /4 FL-4D-1 M6 14~20 1.4~ ~14.7 6, / / /4 FL-4D-10 M6 14~20 1.4~ ~14.7 6, / / /4 FL-5D-1 M6~M8 18~32 1.8~ ~23.6 6, / / /4 FL-5D-10 M6~M8 18~32 1.8~ ~23.6 6, / / /4 FL-6D-1 M8 25~42 2.5~ ~30.9 6, / / /4 FL-6D-10 M8 25~42 2.5~ ~30.9 6, / / /4 *Air Inlet Thre : BSP or NPT 1/4". *Figures in ( ) cn be obtine t the position of "L" mrk on the regultor knob, but for nother, t "H" mrk.

17 SQUARE DRIVE TYPE FPW-110S~660S FPW-770S-1 FPW-2220S-1 Bolt Recommene Torque Rnge Spee Squre Drive Overll Length (without socket) (without socket) Air Consumption (t Lo) mm N m kgf m ft lb min -1 mm in mm in kg lb m 3 /min ft 3 /min mm in Stright s FPW-110S-1 M4 2~ ~ ~5.5 3, / / /4 FPW-330S-1 M5 13~22 1.3~ ~16.2 4, / / /4 FPW-440S-1 M4~M6 20~34 2.0~ ~25.1 5, / / /4 FPW-550S-1 M6~M8 27~44 2.8~ ~32.5 5, / / /4 FPW-660S-1 M6~M8 34~54 3.5~ ~39.8 5, / / /8 FPW-770S-1 M8 44~76 4.5~ ~56.1 6, / / /8 FPW-2220S-1 M18~M20 300~ ~ ~ , / / /2 *Air Inlet Thre : BSP or NPT 1/4", (FPW-2220S) BSP or NPT 1/2". Air Hose BIT SHANK TYPE FPW-110SD FPW-330SD~660SD Bolt Recommene Torque Rnge Spee Bit shnk Overll Length (without socket) (without socket) Air Consumption (t Lo) mm N m kgf m ft lb min -1 mm in mm in kg lb m 3 /min ft 3 /min mm in Stright s FPW-110SD-1 M4 2~7 0.2~ ~5.2 3, / / /4 FPW-110SD-10 M4 2~7 0.2~ ~5.2 3, / / /4 FPW-330SD-1 M5 12~17 1.2~ ~12.5 4, / / /4 FPW-330SD-10 M5 12~17 1.2~ ~12.5 4, / / /4 FPW-440SD-1 M4~M6 15~25 1.5~ ~18.4 5, / / /4 FPW-440SD-10 M4~M6 15~25 1.5~ ~18.4 5, / / /4 FPW-550SD-1 M4~M6 20~34 2.0~ ~25.1 5, / / /4 FPW-550SD-10 M4~M6 20~34 2.0~ ~25.1 5, / / /4 FPW-660SD-1 M6~M8 25~37 2.6~ ~27.3 5, / / /8 FPW-660SD-10 M6~M8 25~37 2.6~ ~27.3 5, / / /8 *Air Inlet Thre : BSP or NPT 1/4". Air Hose Bit B A FPW-***SD-1, FPW-***D-1,2,3,4 A:9.5mm B:12mm FPW-***SD-10, FPW-***D-10,20,30,40 A:13mm B:16mm

18 SQUARE DRIVE TYPE FPW-440SC~660SC FPW-770SC-1 Bolt Recommene Torque Rnge Spee Squre Drive Overll Length (without socket) (without socket) Air Consumption (t Lo) mm N m kgf m ft lb min -1 mm in mm in kg lb m 3 /min ft 3 /min mm in Angle He s FPW-440SC-1 M4~M6 13~24 1.3~ ~17.7 5, / / /4 FPW-550SC-1 M6~M8 22~35 2.2~ ~25.8 5, / / /4 FPW-660SC-1 M6~M8 25~43 2.6~ ~31.7 5, / / /8 FPW-770SC-1 M8 33~50 3.4~ ~36.9 6, / / /8 *Air Inlet Thre : BSP or NPT 1/4". Air Hose The Fuji Gere Pulse Wrenches Shut-Off type provies high power in combintion with low noise n vibrtion through the Dul Chmber Air Motor & Ger-rive ngle he. The ergonomic esign reuces the rection forces experience by the opertor throughout the torque rnge. FPW-770SCG-1 Bolt Recommene Torque Rnge Spee Socket Hex Overll Length Air Consumption (t Lo) mm N m kgf m ft lb min -1 mm in mm in kg lb m 3 /min ft 3 /min mm in FPW-770SCG-1 M4~M6 21~30 2.1~ ~22.1 7, / / /8 *Air Inlet Thre : BSP or NPT 1/4". Air Hose

19 Fuji Impct Wrenches FW-44~88 hve 9-ble ul chmber motor n ouble clutch type impct mechnism. They re esigne for giving high torque t low spee, which give the best chrcteristics for fst relible n ccurte tightening. These moels re provie with two types of lubricnt in clutch prt, FW-44PA~66PA n FW-44SA~66SA series re with oil (Oil Bth type) which fetures long service life n FW-44P~88P n FW-44S~66S re with conventionl grese. Both series re suitble for self tpping type soft joint. Pistol Grip s FW-44PA~66PA FW-88P-1 9.5mm(3/8")~12.7mm(1/2") Bolt Recommene Torque Rnge Mx. Torque Spee Squre Drive Overll Length (without socket) (without socket) Air Consumption (t Lo) mm N m kgf m ft lb N m min -1 mm in mm in kg lb m 3 /min ft 3 /min mm in FW-44PA-2 M5 8~16 0.8~ ~ , / / /4 FW-66PA-2 M6 14~26 1.4~ ~ , / / /4 FW-88P-1 M8 27~50 2.8~ ~ , / / /8 *Mrke re oil bth types. *All s re ouble clutch types. *Air Inlet Thre : BSP or NPT 1/4". Air Hose Stright FW-44SA~66SA Bolt Recommene Torque Rnge Mx. Torque Spee Squre Drive Overll Length (without socket) (without socket) Air Consumption (t Lo) mm N m kgf m ft lb N m min -1 mm in mm in kg lb m 3 /min ft 3 /min mm in FW-44SA-1 M5 8~16 0.8~ ~ , / / /4 FW-66SA-1 M6 14~26 1.4~ ~ , / / /4 *Mrke re oil bth types. *All s re ouble clutch types. *Air Inlet Thre : BSP or NPT 1/4". Air Hose

20 Fuji Impct Wrenches re suitble for vrious fstening n unfstening opertions. The combintion of high torque n fst run own minimise opertor ftigue. Smll Pistol Grip s FW-5PX-6 FW-6PM-1 FW-6PL-1 9.5mm (3/8")~15.9mm (5/8") FW-6PX-5,6 FW-6PH-1,11 FW-8PH-3 FW-10PX-5 FW-10PH-1,2 FW-14PX-5 FW-14PH-1,2 FW-14PH-3 Bolt Recommene Torque Rnge Mx. Torque Spee Squre Drive Overll Length (without socket) (without socket) Air Consumption (t Lo) mm N m kgf m ft lb N m min -1 mm in mm in kg lb m 3 /min ft 3 /min mm in FW-5PX-6 M5 8~13 0.8~ ~ , / / /4 FW-6PM-1 M6 14~26 1.4~ ~ , / / /8 FW-6PL-1 M6 14~26 1.4~ ~ , / / /8 FW-6PX-5 M6 11~23 1.1~ ~ , / / /8 FW-6PX-6 M6 10~18 1.0~ ~ , / / /8 FW-6PH-1 M8 27~40 2.8~ ~ , / / /8 FW-6PH-11 M8 27~40 2.8~ ~ , / /8 FW-8PH-3 M10 42~80 4.3~ ~ , / / /8 FW-10PX-5 M10 50~ ~ ~ , / / /8 FW-10PH-1 M10 63~ ~ ~ , / / /8 FW-10PH-2 M10 47~93 4.8~ ~ , / / /8 FW-14PX-5 M14 100~ ~ ~ , / / /8 FW-14PH-1 M14 85~ ~ ~ , / / /8 FW-14PH-2 M14 85~ ~ ~ , / / /8 FW-14PH-3 M14 85~ ~ ~ , / / /8 *Mrke re ouble clutch types. Others re single clutch types. *Air Inlet Thre : BSP or NPT 1/4". Air Hose

21 Smll Stright s Bolt Angle He s FW-6SX-5,-6 FW-10SX-5 Recommene Torque Rnge Mx. Torque Spee Squre Drive FW-8SH-2 FW-14SX-5 Overll Length (without socket) 9.5mm (3/8")~12.7mm (1/2") (without socket) Air Consumption (t Lo) mm N m kgf m ft lb N m min -1 mm in mm in kg lb m 3 /min ft 3 /min mm in FW-6SX-5 M6 11~23 1.1~ ~ , / / /8 FW-6SX-6 M6 10~18 1.0~ ~ , / / /8 FW-8SH-2 M10 35~67 3.6~ ~ , / / /8 FW-10SX-5 M10 50~ ~ ~ , / / /8 FW-14SX-5 M14 100~ ~ ~ , / / /8 *Mrke re ouble clutch types. Others re single clutch types. *Air Inlet Thre : BSP or NPT 1/4". Air Hose FW-6SCX-6 FW-8SCH-2 Bolt Recommene Torque Rnge Mx. Torque Spee Squre Drive Overll Length (without socket) (without socket) Air Consumption (t Lo) mm N m kgf m ft lb N m min -1 mm in mm in kg lb m 3 /min ft 3 /min mm in FW-6SCX-6 M6 9~18 0.9~ ~ , / / /8 FW-8SCH-2 M10 33~67 3.4~ ~ , / / /8 *Mrke re ouble clutch types. *Air Inlet Thre : BSP or NPT 1/4". Air Hose The Corner Attchment CA-14A cn be mounte on stright or pistol grip type impct wrenches FW-14PX, 14SX to ccess fstening in confine spces. IMPACT WRENCHES+CORNER ATTACHMENT CA-14A CA-14A + FW-14SX-5 Sie to Center Squre Drive Angle He Height Overll Length (without socket) s mm in mm in mm in mm in kg lb CA-14A / / / / FW-14PX,14SX Series

22 Meium Stright s FW-19Z-5 FW-250-1,2 19mm (3/4")~31.8mm (1 1/4") FW FW-420-1C,2C FW-320-1CL (Long Anvil Type) Insie Lever type FW-420-1CL (Long Anvil Type) Insie Lever type Bolt Recommene Torque Rnge Mx. Torque Spee Squre Drive Overll Length (without socket) (without socket) Air Consumption (t Lo) mm N m kgf m ft lb N m min -1 mm in mm in kg lb m 3 /min ft 3 /min BSP or NPT mm in FW-19Z-5C M18 235~ ~ ~ , / / / /8 FW-250-1C M24 380~ ~ ~ , / / /2 FW-250-2C M24 380~ ~ ~ , / / / /2 FW-320-1C M30~M33 600~ ~ ~ , / / /2 FW-320-1CL M30~M33 600~ ~ ~ , / / /2 FW-420-1C M36~M42 900~ ~ ~ , / / /4 FW-420-1CL M36~M42 900~ ~ ~ , / / /4 FW-420-2C M36~M42 900~ ~ ~ , / / / /4 *Mrke re long nvil types. *s with C re Insie Lever types. *FW-19Z-5 is single clutch type. Other s re 2-Jw clutch types. Air Inlet Thre Air Hose

23 Meium Pistol Grip s FW-19PX-5 FW-250P-1,2 FW-320P-1 19mm (3/4")~25.4mm (1") Bolt Recommene Torque Rnge Mx. Torque Spee Squre Drive Overll Length (without socket) (without socket) Air Consumption (t Lo) mm N m kgf m ft lb N m min -1 mm in mm in kg lb m 3 /min ft 3 /min BSP or NPT mm in FW-19PX-5 M18 235~ ~ ~ , / / / /8 FW-250P-1 M24 380~ ~ ~ , / / /2 FW-250P-2 M24 380~ ~ ~ , / / / /2 FW-320P-1 M30~M33 600~ ~ ~ , / / /2 *FW-19PX-5 is single clutch type. Other s re 2-Jw clutch types. Air Inlet Thre Air Hose Hevy Duty Stright s 38.1mm (1 1/2")~63.5mm (2 1/2") FW-50-7, 75-7 FW Bolt Recommene Torque Rnge Mx. Torque Spee Squre Drive Overll Length (without socket) (without socket) Air Consumption (t Lo) mm N m kgf m ft lb N m min -1 mm in mm in kg lb m 3 /min ft 3 /min BSP or NPT mm in FW-50-7 M ~ ~ ~ , / / /4 FW-75-7 M ~ ~ ~ , / / /4 FW M ~ ~ ~ , / / *All s re ouble clutch types. Air Inlet Thre Air Hose

24 Fuji screwrivers re suitble for wie rnge of screw fstening n isssembly pplictions. The compct n lightweight esign provies opertor comfort. All moels re reversible vi reverse lever or push button. Impct clutch type moels re ll of ouble clutch esign n their high torque n fst run-own minimise opertor ftigue. Slip clutch type moels re suitble for sheet metl screws n the torque setting cn be juste esily. IMPACT CLUTCH TYPE - Stright s FW-5SXD-7(70) FW-5SXD-8(80) FW-6SXD-6(60) Bolt Recommene Torque Rnge Mx. Torque mm N m kgf m ft lb N m FW-5SXD-7 M5 6~11 0.6~ ~ FW-5SXD-70 M5 6~11 0.6~ ~ FW-5SXD-8 M5 6~11 0.6~ ~ FW-5SXD-80 M5 6~11 0.6~ ~ FW-6SXD-6 M6 10~18 1.0~ ~ FW-6SXD-60 M6 10~18 1.0~ ~ *Air Inlet Thre : BSP or NPT 1/4". Spee Bit Shnk Overll Length (without socket) (without socket) Air Consumption (t Lo) Air Hose min -1 mm in mm in kg lb m 3 /min ft 3 /min mm in 12, / / /4 12, / / /4 12, / / /4 12, / / /4 10, / / /8 10, / / /8 Pistol Grip s FW-5PXD-6(60) FW-6PLD-1 FW-6PXD-6(60) FW-6PHD-1 FW-6PMD-1(10) Mx. Bolt Recommene Torque Rnge Torque mm N m kgf m ft lb N m FW-5PXD-6 M5 6~11 0.6~ ~ FW-5PXD-60 M5 6~11 0.6~ ~ FW-6PMD-1 M6 11~22 1.1~ ~ FW-6PMD-10 M6 11~22 1.1~ ~ FW-6PLD-1 M6 11~22 1.1~ ~ FW-6PXD-6 M6 10~18 1.0~ ~ FW-6PXD-60 M6 10~18 1.0~ ~ FW-6PHD-1 M8 19~40 1.9~ ~ *Air Inlet Thre : BSP or NPT 1/4". Spee Bit Shnk Overll Length (without socket) (without socket) Air Consumption (t Lo) Air Hose min -1 mm in mm in kg lb m 3 /min ft 3 /min mm in 12, / / /4 12, / / /4 8, / / /8 8, / / /8 10, / / /8 10, / / /8 10, / / /8 9, / / /8 Bit B A FW-*SXD-6, 7, 8, *PXD-6, *P*D-1 A:9.5mm B:12mm FW-*SXD-60, 70, 80, *PXD-60, *P*D-10 A:13mm B:16mm

25 IMPACT CLUTCH TYPE FW-44SAD~66SAD FW-44PAD~66PAD Bolt Mx. Recommene Torque Rnge Torque mm N m kgf m ft lb N m Stright s FW-44SAD-1 M5 6~13 0.6~ ~ FW-44SAD-10 M5 6~13 0.6~ ~ FW-66SAD-1 M6 11~20 1.1~ ~ FW-66SAD-10 M6 11~20 1.1~ ~ Pistol Grip s FW-44PAD-2 M5 6~13 0.6~ ~ FW-44PAD-20 M5 6~13 0.6~ ~ FW-66PAD-2 M6 11~20 1.1~ ~ FW-66PAD-20 M6 11~20 1.1~ ~ *Mrke re oil bth types. *Air Inlet Thre : BSP or NPT 1/4". Spee min -1 Bit Shnk Overll Length (without socket) (without socket) Air Consumption (t Lo) mm in mm in kg lb m 3 /min ft 3 /min Air Hose mm in 5, / / /4 5, / / /4 5, / / /4 5, / / /4 6, / / /4 6, / / /4 5, / / /4 5, / / /4 SLIP CLUTCH TYPE FD-4 FD-5 FD-4P FD-5P Bolt mm N m Recommene Torque Rnge kgf m ft lb Spee min -1 Bit Shnk mm in Overll Length (without socket) (without socket) Air Consumption (t Lo) mm in kg lb m 3 /min ft 3 /min Stright s FD-4 M4 1~4 0.1~ ~3.0 2, / / FD-5 M5 6~12 0.6~ ~8.9 1, / / Pistol Grip s FD-4P M4 1~4 0.1~ ~3.0 2, / / FD-5P M5 6~12 0.6~ ~8.9 1, / / *Air Inlet Thre : BSP or NPT 1/4". *Air Hose : 6.3mm (1/4"). Bit B A FW-**SD-1, **SAD-1, FD-4, 4P, 5, 5P FW-**PD-2, **PAD-2 A:9.5mm B:12mm FW-**SD-10, **SAD-10 FW-**PD-20, **PAD-20 A:13mm B:16mm

26 Fuji offers stll torque type Open-en Wrenches for fst, ccurte tube nut tightening minly use in the ssembly of hyrulic n pneumtic brke pipes n other hose n cble connections in the cr n ircrft ssembly lines. Ger riven mechnism without rtcheting provies precise torque, low noise opertion n long life service. One hn two-step mechnism simplifies the socket relese bck to the open position. Thickness HEAD SIZE Mx. Torque With FOW-10-1 Socket Hex. Opening Spee Thickness He Opening SOCKET SIZE FOW-10-2 Socket Hexgon (mm) Stnr Other s FOW /8" FOW /2" *Specify the socket size in orering the tool. Hex. Socket (Stnr) Air Consumption (t Lo) N m kgf m ft lb min -1 mm in mm in mm in mm in mm in kg lb m 3 /min ft 3 /min FOW / / / / / FOW / / / / / *Air Inlet Thre : BSP or NPT 1/4". *Air Hose : 9.5mm (3/8"). Rtchet Wrenches re use for fstening opertions in confine spces where ngle impct tools n nutrunners cnnot rech. Reverse opertion cn be ccomplishe by simply turning the wrench over. With Overll Length FRW-6NX-3, -4(A) FRW-8NX-2, (-2A) FRW-10N-2 FRW-13N-3,-4 With Thickness Socket Hex. HEAD SIZE Length SOCKET SIZE Socket Hexgon (mm) Stnr Other s FRW-6NX W 10W FRW-6NX-3A 10 8 FRW-6NX W 13W FRW-6NX-4A FRW-8NX /2" 9/16" 10W 12W 13W 14W FRW-8NX-2A FRW-10N /16" 5/8" 14W 17W FRW-13N W 21W FRW-13N W 24W 26W 27W *Specify the socket size in orering the tool. Bolt Mx. Torque Spee Hex. Socket Thickness He With Air Consumption (t Lo) mm N m kgf m ft lb min -1 mm mm in mm in mm in mm in kg lb m 3 /min ft 3 /min FRW-6NX-3 M / / / / FRW-6NX-3A M / / / / FRW-6NX-4 M / / / / FRW-6NX-4A M / / / / FRW-8NX-2 M / / / / FRW-8NX-2A M / / / / FRW-10N-2 M / / / / FRW-13N-3 M / / / / FRW-13N-4 M / / / / *Air Inlet Thre : BSP or NPT 1/4". *Air Hose : 9.5mm (3/8"). Length Overll Length

27 HEXAGONAL SOCKETS SSQ BHex D L EXTENSION BARS SSQ L SSQ D AC No. Bolt S (SQ) B (Hex) L D M W mm(in) mm mm mm mm / (3/8) / / / /8 (1/2) / / / / (3/4) / / / / (1) / / / (1 1/4) / / (1 1/2) / / (2 1/2) / *Other socket sizes re vilble on request. s FPT-110~770 FLT-4-1~5-1 FPW-110~770 FL-4-1~5-1 FW-5 FW-6, 44~66 FLT6-1~9-1 FL6-1~9-1 FW-6PH-11 FW-8 FW-88, 10, 14 except for FW-14PH-3 FPT-1660 FPW-1660, 2220 FW-19 FW-2C FW-250P-2 FW-1C FW-250P-1 FW-320 FW-420 FW-420-2, 2C FW-50-7 FW-75-7 FW AC No. S (SQ) L D mm(in) mm mm (3/8) (1/2) (3/4) (1) (1 1/4) (1 1/2) (2 1/2) UNIVERSAL JOINTS AC No. D (3/8) (1/2) (3/4) SSQ S (SQ) L D mm(in) mm mm L s FPT-110~770 FLT-4-1~5-1 FL-4-1~5-1 FPW-110~770 FW-5, 6, 44~66 FLT6-1~9-1 FL6-1~9-1 FW-6PH-11, 8, 88 FW-10, 14 except for FW-14PH-3 FPT-1660, FPW-1660, 2220 FW-19 FW-2C FW-250P-2 FW-1C FW-250P-1 FW-320 FW-420 FW-2C FW-50-7 FW-75-7 FW s FLT-4-1~9-1 FPT-110 FL-4-1~9-1 FPW-110 FW-5, 6, 44~66 SSQ FLT-11-1~20S-1 - FL11-1~13-1 FW-6PH-11, 8, 88 FW-10, 14 except for FW-14PH-3 FPT-1660, FPW-1660, 2220 FW-19 FW-2C FW-250P (1) FW-250~ (1 1/4) (1 1/2) FW-2C FW-50-7

28 BITS SELECTION GUIDE Fuji offers two types of screwriver bits ccoring to their neck length. Select suitble moels or bits using the following tble. Our screwriver bits re vilble in three ifferent ctegories of hrness to cover lmost ll pplictions: H (hr), G (stnr), E (soft). The most common hrness bit re liste. Other hrness's re vilble on request. GROUP MODELS FPT-110D-10, FLT-4D-1~4D-10~5D-1~5D-10~6D-1~6D10, 110SD-10, 330SD-10, 440SD-10, 550SD-10, 660SD-10 (1) FPW-110D-10, 770D-30 - FL-4D-10~5D-10~6D-10, 110SD-10, 330SD-10, 440SD-10, 550SD-10, 660SD-10 FW-5SXD-70, 80, 6SXD-60, 5PXD-60, 6PMD-10, 6PLD-10, 6PXD-60, 6PHD-10, 44SAD-10, 66SAD-10, 44PAD-20, 66PAD-20 FPT-110D-1, FLT-4D-1~4D-10~5D-1~5D-10~6D-1~6D10, 110SD-1, 330SD-1, 440SD-1, 550SD-1, 660SD-1 (2) FPW-110D-1, 770D-3 - FL-4D-1~5D-1~6D-1, 110SD-1, 330SD-1, 440SD-1, 550SD-1, 660SD-1 FW-5SXD-7, 8, 6SXD-6, 5PXD-6, 6PMD-1, 6PLD-1, 6PXD-6, 6PHD-1, 44SAD-1, 66SAD-1, 44PAD-2, 66PAD-2, FD-4, 5, 4P, 5P SLOTTED BITS t W ø ø CROSS RECESSED BITS SINGLE-ENDED Thickness With Length mm mm mm Hrness AC No. Group G A (1) G A (1) G A (1) G A (1) G A (1) G A (1) E B (2) *Minimum orer require : 100pcs. /item CROSS RECESSED BITS DOUBLE-ENDED Dimeter Length Point mm mm Hrness AC No. Group H A (1) H A (1) H B (2) H B (2) H B (2) G B (2) G B (2) G B (2) G B (2) H B (2) E B (2) E B (2) G B (2) *Minimum orer require : 100pcs. /item. Point Hrness AC No. Group 1 45 H A (1) H A (1) H A (1) 2 45 G A (1) 2 65 G A (1) G A (1) G A (1) G A (1) G A (1) 3 45 E A (1) 3 65 E A (1) E A (1) 1 75 H B (2) 2 50 H B (2) G B (2) G B (2) G B (2) G B (2) 3 75 E B (2) E B (2) *Minimum orer require : 100pcs. /item. CROSS RECESSED BITS DOUBLE-ENDED TORSION TYPE Length mm ø ø Dimeter Length Point mm mm Hrness AC No. Group H AT (1) H AT (1) H BT (2) H BT (2) *Minimum orer require : 100pcs. /item.

29 ALLEN BITS H H ø Hex Length mm mm Hrness AC No. Group 2 65 H A16H2065 (1) H A16H2110 (1) H A16H25065 (1) H A16H25110 (1) 3 65 H A16H3065 (1) H A16H3110 (1) 4 65 H A16H4065 (1) H A16H4110 (1) 5 65 G A16H5065 (1) G A16H5110 (1) 6 65 G A16H6065 (1) G A16H6110 (1) 2 75 H B35H2075 (2) H B35H2100 (2) H B35H25075 (2) H B35H25100 (2) 3 75 H B35H3075 (2) H B35H3100 (2) 4 75 H B35H4075 (2) H B35H4100 (2) 5 75 G B35H5075 (2) G B35H5100 (2) 6 75 G B35H6075 (2) G B35H6100 (2) *Minimum orer require : 100pcs. /item. TORX BITS Point Length Boy Dimeter mm mm AC No. Group T VT6065 (1) T VT8065 (1) T VT8110 (1) T VT10065 (1) T VT10110 (1) T VT15065 (1) T VT15110 (1) T VT20065 (1) T VT20110 (1) T VT25065 (1) T VT25110 (1) T VT27065 (1) T VT27110 (1) T VT30065 (1) T VT30110 (1) T40 65 H6.35 VT40065 (1) T H6.35 VT40110 (1) T JT6075 (2) T JT6100 (2) T JT8075 (2) T JT8100 (2) T JT10075 (2) T JT10100 (2) T JT15075 (2) T JT15100 (2) T JT20075 (2) T JT20100 (2) T JT25075 (2) T JT25100 (2) T JT27075 (2) T JT27100 (2) T JT30075 (2) T JT30100 (2) T JT40075 (2) T JT40100 (2) T JT45075 (2) T JT45100 (2) *Minimum orer require : 100pcs. /item. *TORX is registere tremrk of Cmcr Div., Textron Inc., USA.

30 SOCKET HEAD BITS H H Dø H H H Dø H Dø Dø Dø ALLEN SOCKETS Dø ø ø7.2 ø7.2 ø7.2 ø7.2 ø Hex Length Boy Dimeter mm mm mm AC No. Group A (1) A (1) A (1) A (1) A (1) A (1) A (1) A (1) A (1) A (1) A (1) A (1) A (1) A (1) A (1) A (1) A (1) A (1) A (1) A (1) A (1) B (2) B (2) B (2) B (2) B (2) B (2) B (2) B (2) B (2) B (2) B (2) B (2) B (2) B (2) B (2) *Minimum orer require : 100pcs. /item. B Hex L S(SQ) D AC No. S (SQ) B (Hex) L D mm(in) mm mm mm mm HG HG HG (3/8) HG HG HG HG HG (1/2) HG HG s FPT-110~770 FLT-4-1~9-1 FL-4-1~9-1 FPW-110~770 FW-5, FW-6, 44~66 FLT-11-1~20S-1 FL-11-1~13-1 FW-6PH-11, 8, 88 FW-10, 14 except for FW-14PH-3 CHUCKS FOR WRENCHES FOR USE OF BITS TOOL COVER FOR FPW SERIES B Hex L DOUBLE-ENDED BIT CHUCK S(SQ) AC No. S (SQ) B (Hex) L mm(in) mm mm DC (3/8) 6.35(1/4) 51 DC (1/4) 8.00(5/16) 56 s FPT-110, FLT-4-1~9-1 FPW-110, FL-4-1~9-1, FW-5, 6, 44~66 FLT-11-1~20S-1 - FL11-1~13-1 FW-6PH-11, 8, 88, 10, 14 except for FW-14PH-3 AC No. TCV-1 TCV-2 s FL-5-1~6-1 FL-7-1

31

32 1) INTENDED USE The tool is esigne to be use with brsive prouct for grining, cutting n sning mterils. Do not use the tool for ny other purpose. 2) PROTECTIVE EQUIPMENT Alwys wer necessry protective equipment such s n eye protector, n er protector, fce shiel, sfety pron, helmet, gloves n other necessry protective clothing. Use protective brriers where necessry. INSTRUCTION AND WARNING FOR SAFETY USE 5) CORRECT WHEEL GUARD AND FLANGES FOR GRINDER Alwys use the wheel gur n wheel flnges supplie with the tool n ensure tht they re mounte correctly with the pproprite tightness when mounting the brsive prouct. Only trine & qulifie personnel shoul mount the brsive prouct. Do not use wheel gur or the flnges if they re mge or worn. Do not moify or repir wheel gur or flnges. 6) CORRECT ABRASIVE PRODUCT TO CORRECT TOOL Mke sure the imensions of the brsive prouct re comptible with the tool n tht the brsive prouct fits the spinle of the tool. 3) MAXIMUM SPEEDS OF ABRASIVE PRODUCT AND TOOL Alwys check the spinle spee of the tool when mounting the brsive prouct. Ensure tht the mximum free spee rting of the brsive prouct is bove tht of the tool in use. 4) WHEEL SIZES OF ABRASIVE PRODUCT AND PERIPHERAL SPEED The following is reference of Grining wheel size / Peripherl spee / Mximum free spee. When using brsive prouct, on which the peripherl spee is shown inste of the mximum llowble free spee, refer to the reference. 7) MOUNTING AND DISMOUNTING ABRASIVE PRODUCT When mounting n ismounting the brsive prouct, mke sure to isconnect tool. Mke sure the imensions of the brsive prouct re comptible with the tool n tht the brsive prouct fits the spinle of the tool. 8) TOOL WITH SPEED GOVERNOR For the griner with spee governor, check the mximum free spee regulrly. Mke it rule to check the mximum free spee, whenever before use. Wheel imeter / Peripherl spee / Mximum free spee Grining Peripherl spee (m/s) wheel imeter mm Mximum free spee (min -1 )

33 1 REAR EXHAUST The rer exhust reuces the risk of scttering ebris such s grinings, shvings, etc. ue to the exhust ir irection. In ition, when using the inlet n exhust hoses supplie with the tools, this helps to reuce the soun level. FG-06-1, 13X, 12UX, 25DX, 26X, 50X, FA-2CX, 3CX SERIES 2 CENTRIFUGAL SPEED GOVERNOR The spee governor mintins the working spee of the tool to better egree thn conventionl tool without governor. Consequently, the brsive life is improve ue to the stbility of the cutting spee. It is less susceptible to chnges in ir pressure n wer of the governor prts. ANGLE, STRAIGHT, VERTICAL GRINDERS 3 ANTI-FREEZING SWIVEL SILENCER The nti-freezing swivel silencer minimises the effect of freezing uring opertion of the tool. In ition, it lso enbles the opertor to irect the exhust ir to provie mximum opertor comfort. ANGLE GRINDERS EXCEPT FA-2C, 3CX, 150K SERIES 4 GEAR COOLING DEVICE The ptente ger cooling evice helps to minimise wering of the bevel ger n pinion by metering some exhust ir through them n proviing cooling effect. ANGLE GRINDERS 5 LOCKING LEVER HANDLE The locking lever helps to reuce the risk of invertent strting of the tool. The opertor nees to push the locking lever, or the locking button, to strt opertion of the tool. When the lever is relese, the tool utomticlly reverts to the locke conition. 6 ACCURATE COLLET ALIGNMENT The collet is mounte in the spinle in orer to provie miniml eflection. Furthermore, the compct collet nut enbles finishing opertions in confine spces. DIE GRINDERS 7 STURDY STEEL HOUSING Die Griners feture compct n urble steel housing for longer service life. FG-13-2,13X-2, 20, 26-20

34 Pencil Griners re excellent tools for eburring, contouring n light grining when use with rotry burr. The smll compct imeter, n light weight, i precise ppliction. FG-06-1 Collet Mx. Di. Overll Mx. Air Hose Power Mounte Wheel Burr He Spee Length Air Consumption mm in mm in mm in min -1 kw hp mm in kg lb m 3 /min ft 3 /min mm in FG /8 10 3/8 6 1/4 60, / /32 *Air Inlet Thre : BSP or NPT 1/4". Super high spee opertion provies more precise finish. Ø3mm or Ø1/8" n Ø6mm or Ø1/4" collet sizes re vilble to suit the ppliction. TURBO-100 TURBO-100A Collet Mounte Wheel Mx. Di. Burr He Spee mm in mm in mm in min -1 kw hp mm in kg lb m 3 /min ft 3 /min mm in TURBO /8 8 5/16 6 1/4 80,000~100, / /32 TURBO-100A 6 1/4 8 5/16 8 5/16 80,000~100, / /32 *Air Inlet Thre : BSP or NPT 1/8". Power Overll Length Mx. Air Consumption Air Hose Accessories Provie for Turbo Series F-101 F-301 IH-4B AL3000-1/4 F-501 BB-SF0011 Open-En Wrench 1 Hex. Wrench 1 Inlet Hose 1 Oiler 1 Pin Wrench 1 Bll Bering 2

35 Fuji Die Griners feture ccurte collet lignment, light weight, compct esign n high power-to-weight rtio. They re wiely use for grining n eburring with either mounte wheel or rotry burr. vritions inclue front or sie exhust, rer exhust n extene spinle. LOCKING LEVER HANDLE MODELS FG-13X-1F FG-13-1F FG-13X-10F FG-13-10F Collet Mx. Di. Mounte Wheel Burr He mm in mm in mm in Spee Overll Length Mx. Air Consumption min -1 kw hp mm in kg lb m 3 /min ft 3 /min mm Front Exhust Type FG-13-1F 3 1/8 13 1/2 10 3/8 30, / /4 FG-13-10F 3 1/8 13 1/2 10 3/8 30, / /4 Rer Exhust Type FG-13X-1F 3 1/8 13 1/2 10 3/8 30, / /4 FG-13X-10F 3 1/8 13 1/2 10 3/8 30, / /4 *Air Inlet Thre : BSP or NPT 1/4". LOCKING LEVER HANDLE MODELS Power Air Hose in FG-26-20BF, 50-2BF FG-26-10F, 50-1F FG-26X-10F, 50X-1F Collet Mx. Di Mounte Wheel Burr He Spee Mx. Air Inlet Thre Air Consumption mm in mm in mm in min -1 kw hp mm in kg lb m 3 /min ft 3 /min BSP or NPT mm Front or Sie Exhust Type FG-26-20BF 6 1/ /2 24, / /4 9.5 FG-26-10F 6 1/ /2 24, / /4 9.5 FG-50-2BF 6 1/ /4 22 7/8 18, / /4 9.5 FG-50-1F 6 1/ /4 22 7/8 18, / /4 9.5 Rer Exhust Type FG-26X-10F 6 1/ /2 24, / /4 9.5 FG-50X-1F 6 1/ /4 22 7/8 18, / /4 9.5 Specify front or sie exhust when orering. Power Overll Length FG-12U series, FG-25D series n FG-50D series Die Griners re feture with n ergonomic spinle esign supporte by ouble berings n connecte to the motor spinle vi coupling. This esign provies lower vibrtion, lower contct shock ginst the work piece, high ccurcy n mnoeuvrbility. LOCKING LEVER HANDLE MODELS Air Hose in 3/8 3/8 3/8 3/8 3/8 3/8 FG-12U-1F FG-25D-1F, 50D-1F FG-12UX-1F, 25DX-1F, 50DX-1F Collet Mx. Di. Mounte Wheel Burr He Spee Mx. Air Consumption mm in mm in mm in min -1 kw hp mm in kg lb m 3 /min ft 3 /min mm in Sie Exhust Type FG-12U-1F 3,6 1/8,1/4 13 1/2 8 5/16 43, / /4 FG-25D-1F 3,6 1/8,1/ /2 24, / /8 FG-50D-1F 3,6 1/8,1/ /4 22 7/8 18, / /8 Rer Exhust Type FG-12UX-1F 3,6 1/8,1/4 13 1/2 8 5/16 43, / /4 FG-25DX-1F 3,6 1/8,1/ /2 24, / /8 FG-50DX-1F 3,6 1/8,1/ /4 22 7/8 18, / /8 *Air Inlet Thre : BSP or NPT 1/4". Power Overll Length Air Hose

36 EXTENDED TYPE MODELS Collet mm FG-26L-1BF Mx. Di. (Mounte Wheel) in mm in Spee Spinle Thre FG-3H-5F Overll Length Mx. Air Consumption Air Hose min -1 in kw hp mm in kg lb m 3 /min ft 3 /min mm in Locking Lever Hnle s FG-26L-1BF 6 1/4 25 x 13 x 1 x 1/2 x 24,000 5/16 24UNF / /8 FG-3H-5F 6 1/4 45 x 13 x 1 25/32 x 1/2 x 14,600 3/8-24UNF / /8 *Air Inlet Thre : BSP or NPT 1/4", FG-3H-5, 5F: BSP or NPT 3/8". Power ANGLE TYPE MODELS FA-2C-2BF, 3BF Sie Exhust Type Collet mm Mx. Di. (Mounte Wheel) in mm in Spee Spinle Thre Power Overll Length Mx. Air Consumption Air Hose min -1 in kw hp mm in kg lb m 3 /min ft 3 /min mm in Locking Lever Hnle s FA-2C-2BF 6 1/4 38 x 13 x 1 1/2 x 1/2 x 15,000 3/8 24UNF(M) / /8 FA-2C-3BF 6 1/4 38 x 13 x 1 1/2 x 1/2 x 15,000 W3/8 16(M) / /8 *Air Inlet Thre : BSP or NPT 1/4". FA-2CX-2BF, 3BF Rer Exhust Type Collet mm Mx. Di. (Mounte Wheel) in mm in Spee Spinle Thre Power Overll Length Mx. Air Consumption Air Hose min -1 in kw hp mm in kg lb m 3 /min ft 3 /min mm in Locking Lever Hnle s FA-2CX-2BF 6 1/4 38 x 13 x 1 1/2 x 1/2 x 15,000 3/8 24UNF(M) / /8 FA-2CX-3BF 6 1/4 38 x 13 x 1 1/2 x 1/2 x 15,000 W3/8 16(M) / /8 *Air Inlet Thre : BSP or NPT 1/4".

37 These powerful Griners re esigne with ger reuction mechnism n spee control governor to mintin the power n rottionl spee. Their light weight n compct esign mke them excellent for polishing, grining, pint removl n cn be use with non-woven cloth, brushes, flp wheels n buffs. Collet FG-2VX-1F Spee Spinle Thre Power Overll Length FG-3VX-1F, 6F Mx. Air Consumption Air Inlet Thre mm in min -1 in kw hp mm in kg lb m 3 /min ft 3 /min PT or NPT mm in Locking Lever Hnle / Rer Exhust s FG-2VX-1F 6 1/4 4,300 3/8-24UNF / / /8 FG-3VX-1F 6 1/4 7,600 W3/ / / /8 FG-3VX-6F 6 1/4 12,000 W3/ / / /8 Air Hose FG-3VX-2F, 3F Wheel Mx. Air Inlet Cpcity Power Overll Length Spee Thre (with wheel gur) Air Consumption Thre Air Hose mm in min -1 in kw hp mm in kg lb m 3 /min ft 3 /min BSP or NPT mm in Locking lever Hnle / Rer Exhust s FG-3VX-2F 75 x 19x x 3/4 x 3/8 9,500 W3/ / / /8 FG-3VX-3F 125 x 19x x 3/4 x 3/8 7,600 W3/ / / /8 *s mrke re without wheel gur. All Fuji Griners re esigne n prouce using Fuji's ltest griner technology. Fuji Stright Griners re equippe with centrifugl spee control governors, noise reucing esign, n locking hnle. These stnr fetures ssure high performnce n smooth opertion. FG-3H-1F, 2F FG-4H-1F, 2F FG-5H-1M, 2M, 6H-1M FG-8H-1M, 2M FG-8H-1C Mx. Di. (Grining Wheel) Spee Spinle Thre Mx. Air Consumption mm in min -1 in kw hp mm in kg lb m 3 /min ft 3 /min BSP or NPT mm in Locking Lever Hnle s FG-3H-1F 65 x 13 x /2 x 1/2 x 3/8 14,600 W3/ / / /8 FG-3H-2F 75 x 13 x x 1/2 x 3/8 12,700 W3/ / / /8 FG-4H-1F 100 x 19 x x 3/4 x 3/8 9,500 W3/ / / /2 FG-4H-2F 100 x 19 x x 3/4 x 1/2 9,500 W1/ / / /2 FG-5H-1M 125 x 19 x x 3/4 x 1/2 7,600 W1/ / / /2 FG-5H-2M 125 x 19 x x 3/4 x 5/8 7,600 5/8 11UNF / / /2 FG-6H-1M 150 x 25 x x 1 x 5/8 6,300 5/8 11UNF / / /2 FG-8H-1M 205 x 25 x x 1 x 5/8 4,600 5/8 11UNF / / /2 FG-8H-2M 180 x 25 x x 1 x 5/8 5,300 5/8 11UNF / / /2 Grip Hnle s FG-8H-1C 205 x 25 x x 1 x 5/8 4,600 5/8 11UNF / / /2 Power Overll Length Air Inlet Thre Air Hose

38 Fuji Extene Griners re iel for grining opertions in confine spces or insie pipes. A wie rnge of Griners is offere to cover vrious grining opertions. FG-50L-1BF FG-50Y-1BF Mx. Di. (Grining Wheel) Spee Spinle Thre FG-3HL-1F FG-4HL-1F Mx. Air Consumption mm in min -1 in kw hp mm in kg lb m 3 /min ft 3 /min mm in Locking Lever Hnle s FG-50L-1BF 50 x 13 x x 1/2 x 3/8 18,000 W3/ / /8 FG-50Y-1BF 50 x 13 x x 1/2 x 3/8 18,000 W3/ / /8 FG-3HL-1F 65 x 13 x /2 x 1/2 x 3/8 12,000 W3/ / /8 FG-4HL-1F 75 x 19 x x 3/4 x 3/8 12,000 W3/ / /2 FG-5HL-2M 100 x 19 x x 3/4 x 1/2 9,000 W1/ , / /2 *FG-50L, 50Y series: 1/4" Air Inlet. FG-3HL, 4HL, 5HL series: 3/8" Air Inlet. Locking Lever Hnle s Power Overll Length Air Hose Fuji offers wie vriety of Angle Griners for use in ny grining opertion. Mny moels hve fetures of mchine bevel gers, spee control governor, built-in exhust n ptente ger cooling esign. Fuji hs more moels n vritions thn ny other mnufcturer. FA-2CX-1BF FA-3CX-1F/2F Mx. Di (Grining Wheel) Spee Spinle Thre Angle He Height Mx. Air Consumption mm in min -1 in mm in kw hp mm in kg lb m 3 /min ft 3 /min mm in Rer Exhust Type FA-2CX-1BF 50 x 4 x x 5/32 x 3/8 15,000 1/4-28UNF(F) / / /8 FA-3CX-1F 75 x 4 x x 5/32 x 3/8 15,000 M8-1.25P(F) / / /8 FA-3CX-2F 100 x 6 x x 1/4 x 5/8 13,500 M8-1.25P(F) / / /8 *Air Inlet Thre SIze: BSP or NPT 1/4". Locking Lever Hnle s Power Overll Length Air Hose FA-5E-13F FA-5E-13VF Mx. Di. (Grining Wheel) in Spee Angle He Height Overll Length Mx. Air Consumption 3/8-24UNF Thre Mle Spinle Type FA-5E-13F 125 x 6 x x 1/4 x 7/8 12, / / /8 FA-5E-13VF 125 x 6 x x 1/4 x 7/8 12, / / /8 *Air Inlet Thre : BSP or NPT 3/8". Power Air Hose mm min -1 mm in kw hp mm in kg lb m 3 /min ft 3 /min mm in

39 Locking Lever Hnle s FA-6C, 8M FA-7E, 6VF FA-7E, 8VF Mx.Di. (Grining Wheel) *Air Inlet Thre : BSP or NPT 3/8". Spee Angle He Height Power Overll Length mm in min -1 mm in kw hp mm in kg lb m 3 /min ft 3 /min mm in Mx. Air Consumption Air Hose 5/8-11UNC Thre Mle Spinle Type FA-6C-8M 180 x 6 x x 1/4 x 7/8 7, / / /2 FA-7E-6VF 180 x 6 x x 1/4 x 7/8 7, / / /2 FA-7E-8VF 180 x 6 x x 1/4 x 7/8 8, / / /2 Locking Lever Hnle s FA-5E-6VF FA-7E-5VF FA-6C-9M Mx.Di. Overll Mx. Air Air Hose Power Sning Disc Wire Brush Spee Length Consumption mm in mm in min -1 kw hp mm in kg lb m 3 /min ft 3 /min mm in 3/8-24UNF Thre Mle Spinle Type FA-5E-6VF 180 x x x x 7/8 100 x x x x 5/8 6, / /8 5/8-11UNC Thre Mle Spinle Type FA-6C-9M 180 x x x x 7/8 100 x x x x 5/8 7, / /2 FA-7E-5VF 180 x x x x 7/8 100 x x x x 5/8 7, / /2 *Air Inlet Thre : BSP or NPT 3/8". *Specify Sning Discs or Wire Brushes when orering. Locking Lever Hnle (110 Angle) FA-4CHK-3F Mx.Di. Overll Mx. Air Air Hose Power Sning Disc Wire Brush Spee Length Consumption mm in mm in min -1 kw hp mm in kg lb m 3 /min ft 3 /min mm in W1/2-16 Thre Femle Spinle Type FA-4chk-3F 150 x x x x 7/8 125 x x x x 5/8 8, / /8 *Air Inlet Thre : BSP or NPT 3/8". *Specify Sning Discs or Wire Brushes when orering. This Sner fetures rer exhust, low noise, high spee n comfortble esign. It is useful for vrious sning work. Height FG-5PX-1 Overll Length Mx.Di. Mx. Height Power Overll Length (Sning Disc) Spee Air Consumption Air Hose mm in min -1 mm in kw hp mm in kg lb m 3 /min ft 3 /min mm in FG-5PX x x x x 7/8 12, / / /8 *Air Inlet Thre : BSP or NPT 1/4".

40 Fuji Verticl Griners re very powerful ue to their irect rive shfts. All verticl griners feture centrifugl spee control governor tht mintins rottionl frequency even uner hevy grining lo. All s re 5/8"-11UNC mle spinle type with locking lever hnle. STANDARD TYPE FV-7-1M,4M FV-9BH-1M Mx.Di. (Grining Wheel) Spee mm in min -1 mm in kw hp mm in kg lb m 3 /min ft 3 /min mm in FV-7-1M 180 x 6 x x 1/4 x 7/8 6, / / /2 FV-7-4M 180 x 6 x x 1/4 x 7/8 8, / / /2 FV-9BH-1M 230 x 10 x x 3/8 x 7/8 5, / / /4 *Air Inlet Thre : BSP or NPT 3/8", FV-9BH Series: BSP or NPT 1/2". Height Power Overll Length Mx. Air Consumption Air Hose CUP WHEEL TYPE Height Height is istnce from wheel flnge to top. Overll Length FV-9BH-4M Mx.Di. (Cup Wheel) Spee Height Overll Length mm in min -1 mm in kw hp mm in kg lb m 3 /min ft 3 /min mm in FV-9BH-4M 150 x 50 x x 2 x 7/8 4, / / /4 *Air Inlet Thre : BSP or NPT 1/2". Power Mx. Air Consumption Air Hose SANDING DISC TYPE FV-7-2M Mx.Di. (Sning Disc) Spee Height Overll Length mm in min -1 mm in kw hp mm in kg lb m 3 /min ft 3 /min mm in FV-7-2M 180 x x x x 7/8 7, / / /2 *Air Inlet Thre : BSP or NPT 3/8". Power Mx. Air Consumption Air Hose

41 Fuji Belt Sners re iel for precise n efficient sning of confine res such s sphericl surfces n tubes which re ifficult to ccess with conventionl griners. They re lso the iel tool for e-burring pplictions. 360 egree he rottion provies verstile solution for lmost ny ppliction. Flt Sning Roun Chmfering Grining of Weling Bes Flt Finishing FBS-1-1,3 FBS-1-2,4 Insie Corner Sning Chmfering of Smll Pipe Angle Ajustment (Up to 360 egrees) Sning in Nrrow Spce Corner Chmfering Belt Spee Belt Spee Power Overll Length Mx. Air Consumption mm in min -1 m/min kw hp mm in mm in kg lb m 3 /min ft 3 /min mm in FBS x /32 x 12 1/64 20,000 1, / / /8 FBS x /64 x 19 1/2 20,000 1, / / /8 FBS x /64 x 18 1/8 20,000 1, / / /8 FBS x /64 x 18 1/8 20,000 1, / / /8 *Air Inlet Thre : BSP or NPT 1/4". Height Air Hose Sning Belts Contct Arm Assembly Spcer Neele Roller Bll Bering Guie Roller Spinle P Sning Belts in ifferent size re ble to be mounte to the tool by replcing Contct Arm Ass'y. Applicble Belt (mm) Grit #40 Grit #60 FBS x 330 DSB-271 DSB-273 DSB-274 DSB-275 DSB-276 FBS x 520 DSB-261 DSB-263 DSB-264 DSB-265 DSB-266 FBS x 460 DSB-221 DSB-223 DSB-224 DSB-225 DSB-226 FBS x 460 DSB-241 DSB-243 DSB-244 DSB-245 DSB-246 *Mrke re Stnr Accessories. Grit #80 Grit #100 Grit #120 Guie Roller Contct Arm Ass'y S x 330 FBS-1-1 S x 520 FBS-1-2 S x 460 FBS-1-3 S x 460 FBS-1-4

42 Fuji Orbitl Sners re compct, lightweight & mnoeuvrble, yet powerful enough for finishing lcquere n metl surfces prior to re-pinting. The effective ust extrction with rer exhust helps to keep the working environment clen. Fetures Powerful sning, high stbility n low vibrtion. Excellent ust extrction bility to help keep the work re clen Avilble to suit vritions of snppers; self-hesive type, Velcro (Nylon Strip Fstener) Type n stnr Clip-on Type. DISC TYPE FOR-125BF, 150BF Cpcity (Sning Disc) in Spee Angle He Height Locking Lever Hnle s FOR-125BF-E(M) ø , / / /4 FOR-150BF-E(M) ø , / / /4 *Air Inlet Thre : BSP or NPT 1/4". *Ahesive pper type: (E). *Velcro pper type : (M). *FOR Series, Orbit 9mm (11/32") Power Overll Length Mx. Air Consumption Air Hose mm min -1 mm in kw hp mm in kg lb m 3 /min ft 3 /min mm in RECTANGLE SHEET TYPE FOS-175BF Cpcity (Sning P ) Spee mm in min -1 mm in kw hp mm in kg lb m 3 /min ft 3 /min mm in Locking Lever Hnle s FOS-175BF-E(M) 100 x x 7 6, / / /4 FOS-230BF-E 100 x x 9 6, / / /4 FOS-400BF-E 100 x x 16 5, / /4 *Air Inlet Thre : BSP or NPT 1/4". *Ahesive pper type: (E). *Velcro pper type : (M). *FOS Series, Orbit 5mm (3/16") Angle He Height Power Overll Length Mx. Air Consumption Air Hose

43 ACCESSORIES PROVIDED Punching Exhust Hose Dust Bg Spnner Sning Disc Tool / Ro FOR-125B Ro 2pcs. FOR-150B Ro 2pcs. FOS-175BF - - 2pcs. FOS-230BF-E - 2pcs. FOS-400BF-E - 2pcs. * = provie, - = not provie HOLE PATTERN AND DIMENSIONS OF SANDING PAPERS AND PADS Disc Type ø124 ø FOR-125 Series FOR-150 Series Ahesive Pper Type Velcro Pper Type Pper P Pper P FOR-125 FOR-125-#40~#150 PAD-125E FOR-125-M40~M600 PAD-125M FOR-150 FOR-150-#40~#150 PAD-150E FOR-150-M40~M600 PAD-150M * Specify the grit when orering sning ppers. Rectngle Sheet Type ø FOS-175 Series FOS-230 Series FOS-400 Series - Ahesive Pper Type Velcro Pper Type Pper - P Pper P Roll Pper (Clip-on type) FOS-175 FOS-175-#40~#240 PAD-175E FOS-175-M40~M600 PAD-175M - FOS-230 FOS-230-#40~#240 PAD-230E - - FOS-230-C40~C240 FOS-400 FOS-400-#40~#240 PAD-400E - - FOS-400-C40~C240 * Roll Pper : 100mm x 15m (Dimension: FOS-230 (100 x 300)mm, FOS-400 (100 x 470) mm). * Specify the grit when orering sning ppers.

44 COLLET BUSHES D D L L COLLET CHUCKS COLLETS D AC No. Collet Collet Nut Prts No. D s mm in mm in G FG-26, 26X, 26L, 50, 50L, 50Y Series G /8 FG-3H, 3HL, 4H, 4HL Series G /4-1/8 FA-2C, 2BF, 3BF, 2CX,2BF, 3BF *These collet bushes re use for collet chucks. 1 2 D L s mm in mm in mm mm mm CN-1210 G /8-24UNF - 3/8 17Hex FG-50L, 2BF, 50Y, 2BF, 3HL, 2F, CN-1207 G /4 CN-1402 G W3/ /8 17Hex FG-50L-, 1BF, 50Y-, 1BF, 3HL-, 1F, CN-1404 G /4 4HL-1F, 4H-1F G CN-1202 G /8-24UNF - 3/8 17Hex FG-2VX-1F, CN-1208 G /4 FA-2C, 2BF, 2CX, 2BF CN-1406 A W3/ /8 17Hex FA-2C, 3BF, 2CX, 3BF CN-1407 A /4 CN-1114 G G CN-1115 G /8 FG-26, 26X, 26L, 5/16-24UNF 12 - CN-1112 G FG-50, 50X Series G CN-1113 G /4 L L D D Prts No. L s D Tper mm in mm G G /8 1/4-28UNF 3/10 20 TURBO-100 G G /4 W /5 23 TURBO-100A G FG /4-28UNF - 18 G /8 FG-13Series, 13XSeries 25 ø8 Prts No. mm in G G /8 G G /4 s FG-12U, 12UX FG-25D, 25DX FG-50D, 50DX CONE WHEEL L CONE WHEEL APPLICATIONS D AC No. D L Mteril mm mm W3/8-16 A-36P ADAPTER FG-26, 50 Series ADAPTER FOR CONE WHEEL 39 CONE WHEEL D Prt No. D G W3/8-16 5/16-24UNF SPACER FG-50L, 50Y Series FG-3H, 3HL Series SPACER FOR CONE WHEEL L D Prt No. D L mm in mm mm G /

45 TUNGSTEN CARBIDE BURRS mm Shnk Di 6mm Shnk Di Inex No. AC No. He Di Length mm in 1 A B C E F FG-06-1 TURBO-100 FG-13-1F FG-13X-1F Inex No. AC No. He Di Length mm in 6 A08(A13) 8(13) 55(70) 7 B08(B13) 8(13) 55(75) 8 C08(C13) 8(13) 55(60) 9 E08(E13) 8(13) 55(84) 10 F08(F13) 8(13) 55(75) 11 H08(H13) 8(13) 55(70) TURBO-100A FG-12U, 25D, 50D Series FG-12UX, 25DX Series FG-50DX Series MOUNTED WHEELS D D L L D 1 Type AC No. D L D1 Mteril mm mm mm FG-13, 13X Series FG-12U, 12UX Series Stright WA-60 FG-25DX, 50DX Series FG-12U, 12UX, 26, 26X, 50, 50X Series FG-25D, 25DX, 50D, 50DX Series, 3H-5, 5F FG-3VX-6F, FA-2C-2, 3, 2CX-2, 3 Series FG-13, 13X Series FG-12U, 12UX Series Cone WA-60 FG-25DX, 50DX Series FG-12U, 12UX, 26, 26L, 26X, 50, 50X Series FG-25D, 25DX, 50D, 50DX Series, 3H-5, 5F FG-3VX-6F, FA-2C-2, 3, 2CX-2, 3 Series *Minimum orer require :100pcs. / item AC No. Spee s min -1 FG-3VX-6F, 3H-5, 5F ,000 FA-2C-2BF, 3BF FA2CX-2BF, 3BF ø15 ø6 D 1 SHANK BRUSH

46 RADIAL WIRE BRUSHES t t D D AC No. D t Mximum Spee mm mm mm min -1 KWH-100WK ,000 FG-4H-1F KWH-123WK in 9,500 FG-5H KWH-156WK ,500 FG-6H-1M *Minimum orer require :10pcs. / item. AC No. D t Mximum Spee s mm mm mm min , ,000 FG-3H-1F, 3HL-1F ,000 FG-3H-2F, 4HL-1F ,500 FG-4H-1F ,500 FG-4H-2F, 5HL-2M ,600 FG-5H-2M ,600 FG-5H-1M ,300 FG-6H-1M ,600 FG-8H-1C, 1M *Minimum orer require :10pcs. / item. s STRAIGHT GRINDING WHEELS FOR STRAIGHT AND EXTENSION GRINDERS t D AC No. D t Mteril Mximum Spee s mm in mm in mm in min / /8 A-36Q 18, /2 13 1/ /8 A-30R 14,000 FG-3H-1F, 3HL-1F, 2F / /8 A-24P 12,000 FG-3H-2F, 4HL-1F / /8 A-24P 12,000 FG-4HL-1F / /8 A-24P 9,000 FG-4H-1F / /2 A-24P 7,600 FG-5H-1M / /8 A-24P 7,600 FG-5H-2M /8 A-24P 6,300 FG-6H-1M /8 A-24P 5,300 FG-8H-2 Series /8 A-24P 4,600 FG-8H-1 Series * = Minimum orer require :100pcs. / item, others = Minimum orer require : 50pcs. / item. HEAT SHRINK-TUBES FOR EXTENSION GRINDERS 48 Comfort grip to soften ppliction vibrtion n wrm to touch. Tube imeter will shrink to hlf size when hete to 120ºC (250ºF). Cut to suitble size to fit the tool. Before After Object Length AC No. Insie Dimeter Insie Dimeter Thickness m mm mm mm mm M ~17 M ~17 M ~27 M ~27 M ~35 M ~35 M ~45 M ~45 M ~55 M ~55 s FG-06 FG-26L FG-50, 3HL FG-4HL FG-5HL

47 ACCESSORIES FOR FA-2C, -2CX SERIES Fig 1. Fig 4. Fig 8. Fig 5. Fig 6. Fig 7. Fig 2. Fig 4. Fig 6. Fig 7. Fig 3. Fig 4. Fig 6. Fig 8. Fig 7. ATTACHMENTS 29.5 Fig 1. Fig D D /4-28UNF 6ø Prts No. D s A W3/8-24 FA-2C-1BF A W3/8-16 FA-2CX-1BF Prts No. D s A W3/8-16 FA-2CX-2, 3 Series SPACER 19 5 Fig 3. W3/8-16 Prt No. s A FA-2C-3BF, 2CX-3BF RUBBER BACKING PADS Fig 4. Fig. 4 45ø ADHESIVE TYPE AC No. RP-2-1 RP-2-2 W3/8-24 W3/ VELCRO TYPE Fig. 4 45ø W3/8-16 AC No. MP VELCRO WITH SPONGE TYPE Fig. 4 50ø W3/8-16 AC No. MP-2-1S 65

48 SANDING DISCS Fig 5. D SHAFT TYPE AC No. D Grit # s mm mm MD-1 40 MD /4-28 FA-2C-1BF MD UNF FA-2CX-1BF MD MD *Minimum orer require : 50pcs. / item ADHESIVE TYPE Fig 6. D AC No. D Grit # s mm mm DP DP DP DP DP FA-2CX-2, 3 DP Series DP DP DP DP *Minimum orer require :100pcs. / item Fig 7. D VELCRO TYPE AC No. D Grit # s mm MP MP MP MP FA-2CX-2, 3 MP Series MP MP MP *Minimum orer require :100pcs. / item CUP WHEEL Fig 8. H D AC No. D H Grit # s mm mm mm MC W3/ FA-2C-2BF, 2CX, 3BF *Minimum orer require :10pcs. / item

49 RUBBER PAD AND WIRE BRUSH COMBINATION FOR ANGLE SANDERS SANDING DISC WITH RUBBER PAD MALE SPINDLE 5/8-11UNC THREAD A B C D WIRE BRUSH SANDING DISC WITH RUBBER PAD FEMALE SPINDLE W1/2-16 THREAD WIRE BRUSH *Mle Spinle 3/8-24UNF Thre type is pplicble to A type RUBBER BACKING PADS FOR ANGLE AND VERTICAL SANDERS t D AC No. D t mm in mm in mm in mm Pin Spce in Mximum Spee min -1 RP / /64-3/8-24UNF with Attchments 15,000 FA-2C-1BF, 1BF *(A ) RP / /64 - W3/8-16 " 15,000 FA-2C-1BF, 2CX-1BF *(A ) RP / / /32 13,500 FA3CX-2F RP / / /16 8,500 FA-4CHK-3 RP / / /16 8,500 FA-5E-4 Series RP / / /16 7,000 FA-5E-6 Series, 7E-1, 5 Series, FV-7-1M, 2M RP / / /16 5,900 FV-9BH-1M *Mrke * re ttchment number. s DISC BACKING PADS FOR FG-5PX-1 D AC No. D mm in mm in FP /8 FP /8 FG-5PX-1

50 SANDING DISCS FOR ANGLE AND VERTICAL SANDERS D AC No. D Grin # mm in mm in DP /8 14~60 FG-5PX-1 DP /8 14~60 FA-4CHK, 3F FA-6C, 9M DP /8 14~60 FA-7E, 5 Series, FV-7-1M, 2M *Minimum orer require :100pcs. / item s BEVEL WIRE BRUSHES D t Mximum AC No. D t Spee mm mm mm min , S ,400 *S - Stinless Steel *Minimum orer require :10pcs. / item. FA-4CHK-3, 3F s CUP WIRE BRUSHES D t AC No. D mm t Mximum Spee mm mm min ,400 FA-4CHK-3, 3F ,400 FA-4CHK-3, 3F 192S ,000 FA-6C-9M 193S ,000 FA-6C-9M *S - Stinless Steel *Minimum orer require :10pcs. / item. s CENTER DEPRESSED WHEELS FOR ANGLE AND VERTICAL GRINDERS t D AC No. D t Mteril Mximum Spee mm in mm in mm in min / /8 A-36P 161-1S / /8 A-46P 15,000 FA-2C-1BF / /8 A-36S 15,000 FA-3C-1F / /8 A-36P 13,500 FA3CX-1F / /8 A-36P 12,000 FA-5E,13 F Series / /8 A-36P 8,400 FA-6C, 8M, 9M FV-7-1M, 2M, 4M / /8 A-36P 5,900 FV-9BH-1M *Minimum orer require : 25pcs. / item. (162 = Minimum orer require : 500pcs. / item, 168 = Minimum orer require :10pcs. / item.) s

51

52 DRILL SIZE, CUTTING SPEED AND MATERIAL When selecting suitble moel of rill for your ppliction, it shoul be chosen on the bsis of rill bit size n suitble cutting spee for the mteril to be rille. The tble below shows the recommene rill bit sizes for ifferent spees when rilling some common mterils. The figures in the tble re bse on rill spees t norml pressure n the minimum torque in conjunction with rill brekthrough. The tble only shows which rill bit sizes give the cutting spees within the rnges stte. Note tht it is quite possible to rill with smller imeter rill bits, i.e. t lower cutting spees. Longer rill bits thn those inicte my lso be use for occsionl rilling work. However, in the cse of rill bit sizes lrger thn the stnr chuck cpcity of the mchine, the torque my be insufficient for the high cutting forces occurring in conjunction with rill brekthrough. In orer to obtin sufficient cutting force when pplying fee pressure by hn, pre-rilling is recommene for rill bit sizes bove 8 mm when rilling in mil steel, soft cst iron, mlleble iron s well s for holes lrger thn 6 mm in forge steel n stinless steel. Suggeste Cutting Spee (min -1 ) for Drilling Mteril Stinless Steel Forge Steel Mil Steel Soft Cst Iron Mlleble Iron Brss or Bronze Aluminum Mgnesium Plstic Woo Titnium Cutting spee (m/min) Drill bit size mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

53 1 REVERSIBLE DRILLS Fuji offer some reversible rills. The reverse ction is selecte by simply turning the reverse lever. FRD-20R~100R, FCD-23R~100R, F-22RCR, 32RCR 2 TWO-STAGE THROTTLE ACTUATION This mechnism llows slow strt smooth opertion to full spee llowing the rill bit to be centrlise prior to rilling t full spee. FRD-5P, 8PX, 12Z~16Z 3 SWIVEL TYPE EXHAUST COVER The exhust cover cn be rotte to enble the opertor to choose convenient irection of the exhust ir. FRD-20R~50R, FCD-23R~100R 4 REAR EXHAUST WITH BUILT-IN MUFFLER The noise level is minimise vi the muffler built into the exhust cover. FRD-5P, 6PX, 8PX, FCD-6X, 10X 5 LOCKING HANDLE The locking hnle is esigne to reuce the risk of invertent strting of the rill. The hnle reverts utomticlly to the locke position when relese. 6 PLASTIC COVER The plstic cover softens the effect of vibrtion uring the rilling ppliction n cretes "wrm to touch" feeling to improve opertor comfort. FCD-10X, 6EX 7 DEAD HANDLE The e hnle helps to soften the brekthrough rection force experience when rilling "through holes". FRD-6S-7, 6PX-7, 8PX-2, 3, 12Z~16Z 8 SELF-RETURN ROLL HANDLE When the opertor releses the hnle, it utomticlly returns to the "OFF" position n the ir supply is switche off. When orering, "S" to the en of the moel nme. FRD-20R~100R, FCD-23R~100R 9 SWIVEL TYPE AIR EXHAUST HOSE JOINT (OPTION) Connecting n ir exhust hose, with the optionl swivel type ir exhust hose joint, provies improve opertor comfort by irecting the exhust ir wy n reucing the noise level. FRD-20R~50R, FCD-23R~100R

54 Fuji Drills re light weight with stury construction. Their prcticl esign represents Fuji's ltest evelopments in rills technology. Fuji offers complete line of rills with rilling cpcity rnge from 2mm to 100mm. STRAIGHT/SIDE EXHAUST TYPE Drilling Cpcity Stll Torque FRD-5S-1F~6S-7F Spee Type n of Spinle Chuck Cpcity (mm) Sie to Center Overll Length Mx. Air Consumption Thre Type Tper Type mm in N m kgf m ft lb min -1 Thre Tper Thre Tper mm in kw hp mm in kg lb m 3 /min ft 3 /min FRD-5S-1F 5 3/ ,200 3/ / / FRD-5S-2TF 2 5/ ,000 J.T#D / / FRD-6S-2F 5 3/ ,300 3/ / / FRD-6S-3F 8 5/ ,800 3/ / / FRD-6S-5F 10 7/ ,300 3/ / / FRD-6S-7F 13 1/ / / / *FRD-5 series: 1/4" Air Inlet, 1/4"(6.35mm) Air Hose. All other moels: 1/4" Air Inlet, 3/8"(9.5mm) Air Hose. *Mrke re furnishe with De Hnle. Power PISTOL/REAR EXHAUST TYPE FRD-5P-1 FRD-6PX Series FRD-8PX Series Drilling Cpcity Stll Torque Spee Type n of Spinle Chuck Cpcity (mm) Sie to Center Thre Type mm in N m kgf m ft lb min -1 Thre Tper Thre Tper mm in kw hp mm in kg lb m 3 /min ft 3 /min FRD-5P-1 5 3/ ,200 3/ / / FRD-6PX-2 5 3/ ,300 3/ / / FRD-6PX-3 8 5/ ,800 3/ / / FRD-6PX / ,300 3/ / / FRD-6PX / / / / FRD-8PX-1 8 5/ ,600 3/ / / FRD-8PX / ,300 3/ / / FRD-8PX / / / *FRD-5 series: 1/4" Air Inlet, 1/4"(6.35mm) Air Hose. All other moels: 1/4" Air Inlet, 3/8"(9.5mm) Air Hose. *Mrke re furnishe with De Hnle. Power Overll Length Mx. Air Consumption DRILL CHUCKS No. s Type n of Spinle Chuck Cpcity DCK-5J FRD-5S-2T, 2TF J.T.#D(Tper) 5mm DCK-6.5 FRD-5S-1, 1F, 6S-2, 2F, 5P-1, 6PX-2 3/8-24(Thre) 6.5mm DCK-8 FRD-6S-3, 3F, 6PX-3, 8PX-1 3/8-24(Thre) 8mm DCK-10 FRD-6S-5, 5F, 6PX-5, 8PX-2 3/8-24(Thre) 10mm DCK-13 FRD-6S-7, 7F, 6PX-7, 8PX-3, 12Z-1, 1C 1/2-20(Thre) 13mm DCK-16 FRD-16Z-1, 1C 5/8-16(Thre) 16mm

55 GRIP HANDLE MEDIUM SIZE DRILLS Drilling Cpcity (Guince) Stll Torque Spee FRD-12Z-1C, 16Z-1C (Insie Lever) Type n of Spinle Chuck Cpcity Sie to Center Overll Length Mx. Air Consumption Insie Lever mm in N m kgf m ft lb min -1 Thre Tper mm mm in kw hp mm in kg lb m 3 /min ft 3 /min FRD-12Z-1C 12 1/ ,200 1/ / / FRD-16Z-1C 16 5/ / / / *3/8" Air Inlet Thre. 12.7mm(1/2") Air Hose. All moels cn be use for reming work. FRD-12Z series 8mm cpcity, n FRD-16Z series 13mm cpcity. Power HEAVY-DUTY DRILLS FRD-20R~32R FRD-40R, 50R, 65R FRD-75R, 100R Cpcity (Guince) Stll Torque Drilling Reming Tpping Spee Socket Fee Length Power Overll Length Self-return Type mm in mm in N m kgf m ft lb min -1 M.T.# mm in kw hp mm in kg lb FRD-20R-21S 19 3/4 16 5/ / /64 FRD-20R-22S 19 3/4 16 5/ / /32 FRD-23R-21S 22 7/8 19 3/ / /64 FRD-23R-22S 22 7/8 19 3/ / /32 FRD-25R-11S / / /32 FRD-28R-11S / / /32 FRD-32R-11S / / /32 FRD-32R-12S / / /32 FRD-40R-11S / / / /16 FRD-50R-11S / /16 FRD-65R-1S / / / /64 FRD-75R-1S / /8 FRD-100R-1S / /8 *Air Hose : FRD-20R~23R: 1/2", FRD-25R~50R: 3/4", FRD-65R~100R: 1". *Air Inlet Thre : FRD-65R~100R: 1". All other moels: 1/2". Mx. Air Consumption m 3 /min ft 3 /min

56 Fuji Bby Angle Drills re equippe with compct he (low height n sie-to-center he imensions) to llow these tools to be use in confine res. Bll n neele berings use throughout ngle hes provie long service life n less spinle run-out. Drilling Cpcity (Guince) mm in Stll Torque N m kgf m ft lb FCD-6B-1F Spee Spinle Thre Sie to Center in Power SNAKE DRILLS (SN-2~6) Thre 1/4 28 DRILL CHUCKS (CN-1802~1807) Thre 1/4 28 Snke Drill Bits 2mm to 6mm n Drill Chuck cpcities 1/16" to 1/4" re vilble on request. Overll Length Mx. Air Consumption Air Inlet Thre Air Hose mm min -1 in mm kw hp mm in kg lb m 3 /min ft 3 /min BSP or NPT in Front Exhust Type FCD-6B-1F 6 1/ ,500 1/4 28UNF 9.5 3/ / / /4 Fuji utilizes their power trnsmission knowlege in their line of corner rills. In ition to their power, these rills re esigne to work well in confine spces. FCD-6X-1F, 2F FCD-10X-1F Drilling Cpcity (Guince) mm in Stll Torque Spee Spinle Thre in Chuck Cpcity Sie Power to Center in kw hp Overll Length Mx. Air Consumption m 3 /min ft 3 /min Locking Lever N m kgf m ft lb min -1 mm mm mm in kg lb mm in FCD-6X-1F 6 1/ ,500 3/8 24UNF / / /8 FCD-6X-2F 8 5/ ,500 3/8 24UNF / / /8 FCD-10X-1F 10 7/ ,200 1/2 20UNF / / /8 *1/4" Air Inlet Thre, All moels re Rer Exhust types. Air Hose

57 HEAVY-DUTY CORNER DRILLS (NON-REVERSIBLE) F-14CN.S F-32RCN, 32RCNS F-22RCN.S Cpcity (Guince) Mx. Air Stll Torque Socket Sie to Center Fee Length Power Overll Length Drilling Reming Tpping Spee Consumption Self-return Type mm in mm in N m kgf m ft lb min -1 M.T.# mm in mm in kw hp mm in kg lb m 3 /min ft 3 /min F-14CN-1S 14 9/ / , / / / F-14CN-2S 14 9/ / , / / / F-22RCN-1S 22 7/ / / / / F-32RCN-1S / / / / F-32RCNS-1S / / / *12.7mm (1/2") Air Hose. *Air Inlet : F-14CN series: 3/8", All others: 1/2". HEAVY-DUTY CORNER DRILLS (REVERSIBLE) F-22RCR.S F-32RCR.S FCD-23R~50R.S FCD-75R, 100R.S Cpcity (Guince) Drilling Reming Tpping Stll Torque Socket Sie to Center Fee Length Power Spee Overll Length Mx. Air Consumption Self-return Type mm in mm in N m kgf m ft lb min -1 M.T.# mm in mm in kw hp mm in kg lb m 3 /min ft 3 /min F-22RCR-1S 22 7/ / / / / F-32RCR-1S / / / / FCD-23R-11S 22 7/ / / / / FCD-23R-12S 22 7/ / / / / FCD-32R-11S / / / / / FCD-50R-11S / / / FCD-75R-11S / / / FCD-100R-11S / / / *Air Hose : FCD-23 series n F-22, -32series 12.7mm(1/2"), All others: 19mm (3/4"). *Air Inlet Thre : 1/2".

58 C COLLET CHUCKS, SNAKE DRILLS, ATTACHMENT AND PADS FOR FCD-6B B Hex COLLET CHUCKS Collet Nut L ød Collet Prt No. AC No. D B(Hex) C L Collet Nut Collet mm in mm mm mm CN-1801 D D / CN-1802 D D CN-1803 D D CN-1804 D D CN-1805 D D / CN-1806 D D CN-1807 D D CN-1808 D D / /4-28UNF ød SNAKE DRILLS Hex AC No. D mm SN-2 2 SN-3 3 SN-4 4 SN-5 5 SN-6 6 1/4-28UNF ATTACHMENT 14 W3/ Prt No. A /4-28UNF ø45 VELCRO SANDING PAPERS 50 VELCRO RUBBER PAD W3/8-16 Prt No. MP-2-1 ø W3/8-16 (with SPONGE) Prt No. MP-2-1S AC No. Grit # MP MP MP MP MP MP MP MP * Minimum orer require :100pieces / item STIRRING PROPELLERS ø100 AC No. : AT-P01 For use with 10mm Drill Chuck 500 ø10 ADAPTERS TO CONNECT PROPELLERS TO DRILLS 21Hex ød 70 M6 Screw 3/8-24UNF AC No. : AT-P02 For use with 13mm Drill Chuck 500 Prt No. Stirring D Propellers mm M AT-P01 M AT-P02 moels FRD-5S, 6S-2~5 5P, 6PX-2~5 8PX-1, 2 *These pters re esigne to connect propellers irectly to rills. DEAD HANDLE FOR FRD-12Z, 16Z ø190 ø12 PART No. : A This e hnle softens vibrtion n eses opertor's ftigue much more thn the orinry e hnle. 119 APPLICATION EXAMPLES Stirring propellers ttche to FRD series rills W1/2-12 ø30 SOFT JACKETS Soften vibrtion n Chill-touch Protect work piece n tool Improve comfort AC No. Applicble Di. mm SO SO SO SO Thickness x Length mm 2 x 120

59 1 REVERSING A. Twin lever type-one lever for forwr rottion (with throttle ctuion) n one lever for reverse rottion (with throttle ctuion). FT-6BX B. See-sw type lever for throttle ctuion n reversing. FT-8PX C. Push/Pull type-forwr rottion when the tool is pushe into the work-piece, reverse rottion when the tool is pulle wy from the work-piece. FT-6P, 13Z 2 TWO-STAGE THROTTLING This mechnism llows "slow strt" to ensure tp is correctly ligne prior to ctuting "full spee". A L R B C R L PUSH R PULL L FT-6P, 8PX, 13Z 3 AIR REGULATOR A 4 click stop regultor is built in n the opertor cn regulte ir supply for torque justment. FT-6P 4 DEAD HANDLE The e hnle is use to reuce the effect of "sntching" when tpping through hole. It is lso use when tpping "high torque" thres. FT-8PX, 13Z 5 REAR EXHAUST WITH AIR EXHAUST HOSE Connecting n ir exhust hose, provies improve opertor comfort by irecting the exhust ir wy n reucing the noise level. FT-6BX 6 REAR EXHAUST WITH BUILT-IN MUFFLER The noise level is minimise vi the muffler built into the exhust cover. FT-8PX 7 UNIVERSAL TAPPING CHUCK The universl tpping chuck provies optiml grip of the tp uring the tpping opertion. FT-6BX-1T, 8PX-1, 13Z-1 8 DRILL CHUCK A rill chuck cn lso be use for tpping where pproprite. FT-6P, 6BX-1(D Type)

60 Esy to use throttle n reversing trigger combine with universl tpping chuck provie smooth tpping opertion. Fuji Tppers re vilble in tpping cpcities from 6mm to 13mm. FT-6P-1 FT-6BX-1 (Drill Chuck type) FT-6BX-1 (Universl Tpping Chuck type) FT-8PX-1 Type Tpping Cpcity (Guince) Steel Aluminum Spee(min -1 ) Type n of Spinle Chuck Cpcity Mx. Air Overll Length Air Hose Consumption mm in mm in R L Tper # mm mm in kg lb m 3 /min ft 3 /min mm in FT-6P-1 6 1/4 8 5/16 1,000 1,000 J.T.# / /8 FT-6BX-1 D 6 1/4 8 5/16 2,000 2,000 J.T.# / /16 FT-6BX-1 T 6 1/4 8 5/16 2,000 2,000 J.T.# / /16 FT-8PX-1 8 5/ / M.T.# / /8 *FT-6P-1, 6BX-1, 8PX-1: 1/4" Air Inlet Thre. *TYPE: D...Drill Chuck, T...Tpping Chuck. TAPPING CHUCKS No. s Type n of Spinle Tper # Chuck Cpcity TCK-6 FT-6BX-1T J.T.#1 8mm TCK-8F FT-8PX-1 M.T.#1 9mm DRILL CHUCKS No. s Type n of Spinle Tper # Chuck Cpcity DCK-6.5J FT-6BX-1(D Type) J.T.#1 6.5mm DCK-8J FT-6P-1 J.T.#1 8mm

61

62 1 VALVE MECHANISM Equippe with following vlve mechnism, Fuji Percussion Tools hve trouble-free long life. A. PLATE VALVE Plte vlve consists of four prts of vlve sheet, vlve cover, vlve cse n vlve. This simple mechnism n plte vlve surfce provie longer urbility. FR Series B. SLEEVE VALVE Hollow vlve enbles light n compct boy n longer stroke for its size. FRH Series C. PISTON VALVE High blow frequency (60Hz to 90Hz) cn be mintine s this piston functions s vlve proviing high working efficiency. FCH Series, FNS Series n FS Series A B C 2 LOW AIR CONSUMPTION Low ir consumption m 3 /min (ue to the vlve mechnism) enbles Fuji Percussion Tools to be use with smller compressor. FCH Series n FNS Series 3 QUICK CHANGE ATTACHMENTS FOR PERCUSSIVE TOOLS Attchment, such s chisels n neeles, cn be quickly n esily chnge. FCH Series n FNS Series 4 MULTI-NEEDLES Fuji Neele Sclers utilise multiple neeles tht o not contminte the workpiece. FNS Series 5 PLASTIC HANDLE COVER The plstic hnle cover reuces the effect of vibrtion n provies n insulte grip for the opertor. FNS-2P-1F

63 6 SCALING HEADS Three moels re vilble to suit ifferent pplictions- single he, ul he n triple he. FS Series 7 LOCKING HANDLE The locking hnle re esigne to reuce the risk of ccientl strting of the tools. The hnle is utomticlly locke when the opertor releses the hnle. Locking Lever Hnle FS, FR, FCH, FNS Series 8 TUNGSTEN CARBIDE TIPPED PISTON (OPTION) 4-point Tungsten Crbie Piston is vilble on request for hevy removl opertions. FS Series 9 LOW BLOW FREQUENCY The built-in Sleeve Vlve llows the opertor to just the blow frequency by justing the throttle vlve. FRH Series 10 CHISEL RETAINER A. Holer Spring (Bee-Hive Retiner) B. Holer Spring (B) (Quick Chnge Retiner) FRH Series, FC-01SA A B 11 CHISEL HOLDER Fuji Chipping n Clking Hmmers re supplie with chisel retiner s stnr. This reuces the risk of the chisel relesing uring opertion. FC Series

64 Fuji offers 3 vrints of Flux Chippers with ifferent removl rtes. They re iel for vrious removl opertions like light chipping, crving stone, scling, removing pint, rust, wel flux n light fins from cstings. FCH-25B offers "blow" function which is iel for blowing prticles wy from the work piece. FCH-20F-1F FCH-25-1F FCH-25B-1F (Seprte Blow Type) Blows Piston Dimeter Stroke Overll Length Air Consumption Air Inlet (At Lo) Thre Air Hose Locking Lever Hz mm in mm in mm in kg lb m 3 /min ft 3 /min BSP or NPT mm in FCH-20-1F / / / / /4 FCH-20F-1F / / / / /8 FCH-25-1F / / / /8 FCH-25B-1F / / / /16 Fuji Light Hmmers provie controllble impct for rivetting to reuce the effect of work hrening of the rivet or mge to the surrouning metl. These tools re esily pte to perform other opertions, such s cutting, ripping, shering, punching n gouging with suitble chisels fitte. FRH-SERIES KIT FRH-3 FRH-6 FRH-6A FRH- Air Regultor Hose Nipple Holer Spring Holer Spring (B) 7 kins of Chisel Metl Crrying Cse Chisel Shnk Riveting Cpcity (mm) Blows Air Consumption Air Inlet Piston Dimeter Stroke Overll Length Air Hose (At Lo) Thre mm in lb mm Durlmin Steel Hz mm in mm in kg m 3 /min ft 3 /min FRH-3-1 Hex / / / FRH-3-2 Roun / / / FRH-6-1 Hex / / FRH-6-2 Roun / / FRH-6A-1 Hex / / / FRH-6A-2 Roun / / / BSP or NPT in 1/ /8 1/ /8 1/ /8 1/ /8 1/ /8 1/ /8 Fuji Neele Sclers re useful for removing wel flux, sn from cstings, scles from forgings, rust, pint, scles from ship hulls n finishing rough surfces of rock or concrete. Fuji Neele Sclers feture unique vlve less esign n work well on uneven or irregulr surfces. MOVEMENT OF NEEDLES FNS-2-1F FNS-2P-1F Piston No. n Di Air Consumption Air Inlet Air Hose Throttle Blows Neele Length Neele Stroke Overll Length Dimeter of Neele (At Lo) Thre Type Locking Lever Hz mm in mm in 3mm 2mm mm in mm in kg lb m 3 /min ft 3 /min BSP or NPT mm in FNS-2-1F Stright / / / / /8 FNS-2P-1F Pistol / / / / /8 *Specify neele imeter (3mm or 2mm) when orering.

65 Fuji offers 1, 2 n 3-He Scling Hmmers. These tools hve proven to be very efficient in clening hevily oxiize surfces which occur on ships' hulls, briges n storge tnks. FS-2A-1F Air Consumption Air Inlet Number Blows Piston Dimeter Stroke Angle Height Overll Length of (At Lo) Thre Cyliner Hz mm in mm in mm in mm in kg lb m 3 /min ft 3 /min BSP or NPT FS-2A-1F / / /16 510(537) 20 5/64(21 9/64) /8 *9.5mm (3/8") Air Hose. Fuji Sn Rmmers re powerful but light with stroke rnge from 50mm to 127mm. Fuji Sn Rmmers re excellent for rmming sn for csting in ny ferrous or non-ferrous founry. Non-rotry type rmmers re vilble for use with irregulr shpe butts. FR-18B-2F~25B-2F FR-18L-2F~32-2F Blows Piston Dimeter Stroke Butt Dimeter Overll Length Locking Lever Hz mm in mm in mm in mm in kg lb m 3 /min ft 3 /min BSP or NPT mm in FR-18B-2F / / /8 280(383) 11 1/32(15 5/64) / /8 FR-22B-2F / / /32 350(451) 13 25/32(17 3/4) / /8 FR-25B-2F / /64 506(597) 19 59/64(23 1/2) / /2 FR-18L-2F / / /8 558(523) 21 31/32(20 19/32) / /8 FR-22L-2F / / /32 633(600) 24 59/64(23 5/8) / /8 FR-25L-2F / /64 1,043(1,005) 41 1/16(39 9/16) / /2 FR-32-2F / /64 1,086(1,090) 42 3/4(42 29/32) / /2 Air Consumption (At Lo) Air Inlet Thre Air Hose

66 CHISELS FOR FCH L ø12 ø15 L ø12 ø15 BUSHING CHISELS FOR FCH-20 ø11 ø11 Type AC No. L mm G G Blnk G G G G G Flt G G G TIPPED CHISELS FOR FCH Type AC No. Overll Length Remrk mm Point S Stnr S Smll Point Flt S Stnr S Smll Flt Tip AC No. Point l x w x L TWH x 2.5 x 5 l w L CHISELS FOR FCH-20F, 25 AND 25B L L L ø9.53 ø9.53 ø ø12 ø ø Type AC No. L mm F F Blnk F F F Type AC No. L mm F F Flt F F F Type AC No. L mm F F Flux F F F BUSHING CHISELS FOR FCH-20F, 25 AND 25B Tip AC No. Point l x w x L TWH x 6 x 12 l w L TWH x 5 x 15 l w L TWH x 4 x 16 l w L l TWH x 4.5 x 22.5 w L

67 CHISELS FOR FRH SERIES Roun shnk ø R12.7 ø ø Hexgonl shnk ø12.7 ø R Hex ø Inex No. AC No. Prt Nme Roun Hexgonl 808 WA-808 WA-808H Muffler Cutter 809 WA-809 WA-809H Double Ege Pnel Cutter 810 WA-810 WA-810H Flt Chisel 812 WA-812 WA-812H Tper Punch 813 WA-813 WA-813H Rivet Cutter 814 WA-814 WA-814H Blnk Chisel 815 WA-815 WA-815H Spot Wel Breker

68 RETAINER FOR FRH SERIES Holer Spring Prt No. Holer Spring (B) R Rivet Prt Nme FC-01SA FRH-3, 6 FRH-6A H H H Holer Spring H H H Holer Spring (B) RUBBER BUTTS FOR FR-SERIES RIVET SNAPS FOR FRH SERIES ø12.7 R 46.5 ø R ø AC No. mm mm SNAP SNAP SNAP SNAP D H AC No. D mm mm mm R FR-18B, 18L R FR-18B, 18L R FR-22B, 22L R FR-25B, 25L R FR-32 H

69 6 ^g B igh 6^g Bigh,. ; J? > ID D A H " C Z Z Y i ` c l b gz 4 / l l l# [ j _ ^ i h # X b +,

70 Fuji Air Motors re compct n light weight, yet stury n offer high power-to-weight rtios. Fuji offers wie rnge of ir motors from smll 0.1 kw hn-hel motor to lrge 20 kw sttionry motor which re foun t verstile inustries like ships, chemicl plnts, mines n power plnts etc. As ir motors re less likely to generte sprks (unlike brushes in electric motors), they re better suite for use in hzrous environments. REVERSIBLE TYPE F-5SM-8.5R F-5SM-2R F-6SM-2.5R~28R F-8SM-12R~28R F-8SM-8.5R Stll Torque Spee N m kgf m ft lb kw PS min -1 mm in kg lb F-5SM-8.5R / F-5SM-2R / F-6SM-28R , / F-6SM-21R , / F-6SM-12R , / F-6SM-8R / F-6SM-5R / F-6SM-2.5R / F-8SM-28R , / F-8SM-12R , / F-8SM-8.5R / *Specify type of spinle when orering. NON-REVERSIBLE TYPE Mx. Air Air Inlet Thre Consumption m 3 /min ft 3 /min BSP or NPT mm in / / / / / / / / / / / / / / / / / / / / / /8 Horse Power Overll Length Air Hose F-5SM-8.5 F-6SM-2.5~28 F-5SM-2 F-8SMA-8.5~28 Stll Torque Spee N m kgf m ft lb kw PS min -1 mm in kg lb F-5SM / F-5SM / F-6SM , / F-6SM , / F-6SM , / F-6SM / F-6SM / F-6SM / F-8SMA , / F-8SMA , / F-8SMA / *Specify type of spinle when orering. Mx. Air Air Inlet Thre Consumption m 3 /min ft 3 /min BSP or NPT mm in / / / / / / / / / / / / / / / / / / / / / /8 Horse Power Overll Length Air Hose Type of Spinle Hose Connection Chor Type Key Type Thre Type Non-Reversible Type AIR INLET(R) * Spinle Thre Applicble Drill Chuck DCK-6.5 F-6SM-5, 8, 12, 21 F-5SM Series F-8SMA Series F-8SMA-12, 28 3/8-24(UNF) DCK-8 F-6SE, 6SF, 6PFX DCK-10 F-6SM Series F-8SM Series F-8SMA-8.5 F-10MT 1/2-20(UNF) DCK-13 *Drill chucks re pplicble to thre type spinle moels. Reversible Type AIR INLET(R) AIR INLET(L) AIR EXHAUST

71 NON-REVERSIBLE TYPE F-6SE F-6SF F-6PFX F-10MT Appliction Exmple Stirring propeller ttche to F-6PFX Spinle Stll Torque Spee Thre N m kgf m ft lb kw PS min -1 mm in in kg lb F-6SE /32 3/8-24UNF F-6SF /64 3/8-24UNF F-6PFX /4 3/8-24UNF F-10MT /64 1/2-20UNF *For ppliction exmples, plese refer to the stirring propellers on pge 56. Mx. Air Air Inlet Thre Consumption m 3 /min ft 3 /min BSP or NPT mm in / / / / / / / /8 Horse Power Overll Length Air Hose PORTABLE TYPE FM-2R-2C FNR-20 FM-14RK~27RK Spinle Mx. Air Air Inlet Stll Torque Horse Power Socket Overll Length Thre Spee(min -1 ) Squre Consumption Air Hose N m kgf m ft lb kw PS R L M.T.# mm mm in kg lb m 3 /min ft 3 /min BSP or NPT mm in FM-2R-2C / / /2 FNR / / /2 FNR-20S / / /2 FM-14RK / / /2 FM-24RK / / /4 FM-24RK / / /4 FM-27RK / / /4 *Stll Torque, Horse Power n Mx. Air Consumption shown in this tble re of clockwise rottion.

72 STATIONARY TYPE FM-1R~3R FM-5R~10R Air Hose ft 3 /min BSP or NPT mm in Mx. Air Air Inlet Stll Torque Horse Power Overll Length Thre Air Hose Spee(min -1 ) Consumption N m kgf m ft lb kw PS R L mm in kg lb m 3 /min ft 3 /min BSP or NPT mm in FM-1R / / /2 FM-1R ,250 1, / / /2 FM-2R / / /4 FM-3R / / /4 FM-3R / / /4 FM-5R / FM-10R-2 1, / / /4 *Stll Torque, Horse Power n Mx. Air Consumption shown in this tble re of clockwise rottion.

73

74 r r Fuji Tip Dresser FTD-18 series re esigne to be compct, light weight n iel for ressing tips in nrrow spce between opposing tips on electric spot welers. Ptent pplie FTD-18A clmp system provies excellent tip center lignment n ccurte tip repiring. Vrious types of weling tips cn be resse by replcing cutter n cutter cse. Mx. Clmp Mx. Air Cpcity Tip Overll Length Height Spee Consumption Air Inlet Thre Air Hose mm in mm in min -1 mm in kg lb m 3 /min ft 3 /min in mm in FTD ~16 15/32~5/8 1, / BSP or NPT 1/ /8 FTD-18A-1 13~16 33/64~5/ /64 1, / BSP or NPT 1/ /8 Type Item No. Tip shpe (Nominl) FTD-18-1 CLASSIFICATION TABLE FOR CUTTERS Mx. imeter repire(ød) Stnr (1) CUT R ø12 6R x ø12 CUT R ø13 6.5R x ø13 CUT R ø16 8R x ø16 (2) CUT R x ø16 10R~150R ø16 (3) øa x 6R ø12 øa x 6.5R ø13 CUT-3001 ø5 x 8R x ø16 CUT-3002 øa x 8R ø16 ø6 x 8R x ø16 (4) r x øa x 6R ø12 CUT-1002 r x øa x 6.5R ø13 CUT-1003 r x øa x 8R ø16 40r x ø6 x 8R x ø16 (5) 5~6r x 60 ø13 3r or more x 90 ø16 (6) 7~ø9 x 50 ø13 ø10 or more x 50 ø16 CUT ~ø7 x 60 ø13 ø6 x 60 x ø13 ø8 or more x 60 ø16 3~ø4 x 75 ø13 CUT-6002 ø5 or more x 75 ø16 ø6 x 75 x ø16 CUT-6003 ø3 or more x 90 ø16 ø4 x 90 x ø16 CUT-6004 ø3 or more x 90 ø16 ø6 x 90 x ø16 ø3 or more x 120 ø16 (7) r x øa x ød (8) øa x r x ød (9) F ø16 *Besie item liste bove tble, minimum 10pcs. per item is require for orering optionl cutters. Specify the nominl imensions when orering. *Cutter is not provie s stnr ccessory. CUTTER CASES ød (1) R x ød (2) FTD-18A-1 SHAPES OF TIPS AND CUTTERS (6) D R øa x x ød (7) R R x ød r x øa x x ød (3) (8) øa x R x ød D D D D R øa x r x x ød (4) D D D A A A A r r x øa x R x ød (9) A R F x ød (5) D r x x ød r <FTD-18A-1> PAT.P ø22.2 Item No. ød S S S *Cutter resses Weling Tip correctly s insie imeter (ød) of cutter cse ct s guie. Specify cutter cse imeter which mtches tip size. ø16 cutter cse is inclue s stnr ccessory. Specify cutter cse ø12 or ø13 otherwise. TIP Holer

75 Fuji FRF series compct Air File & Sws feture reuce vibrtion n re esigne for eburring, filing n cutting of metl, woo, plstic, n fibreglss. The FRS-45 Air Sw is equippe with mper to minimize vibrtion n, stroke regultor n ble cooling evice. The cutting irection is justble to provie optiml opertor comfort. Tool Nme Stroke Per Minute SPM FRF-4-1, 2 Stroke Chuck Cpcity Mx. Air Consumption mm in mm in mm in kg lb m 3 /min ft 3 /min BSP or NPT mm in FRF-4-1F File 1, / x 13.0 x 20 5/32 x 1/2 x 25/ / / /4 FRF-4-2F Sw 1, / x 13.0 x 20 5/64 x 1/2 x 25/ / / /4 FRS-45 Sw 1, / x 17.7 x 31 3/32 x 45/64 x 1 7/ / / /8 *s mrke 1F, 2F re locking lever hnle types. FILE BLADES FOR FRF-4-1, 1F Overll Length FRS-45 SAW BLADE FOR FRF-4-2, 2F Air Inlet Thre Air Hose Inex No. AC No. Nme Overll Length mm 1 FILE-4P Pillr 2 FILE-4H Hlf Roun 3 FILE-4R Roun FILE-4C Tringle 5 FILE-4S Squre * =Accessories inclue in FRF-4-1, 1F 12 W L AC No. L W mm SAW * =Accessories inclue in FRF-4-2, 2F. W =The number of teeth per inch. SAW BLADES FOR FRS W L 22 AC No. L Cutting Mterils W mm SAW steel plte, pipe, copper, brss, plstic, slte SAW steel plte, pipe SAW steel plte, pipe SAW steel plte, pipe, copper, brss, plstic, slte SAW steel plte, pipe SAW steel plte, pipe, copper, brss, plstic, slte SAW steel plte, pipe * =Accessories inclue in FRS-45. W =The number of teeth per inch. *Using cutting flui extens life of ble. A mixture of turpentine n kerosene with spinle oil, sopsus, grese t the rte of 7 to 3 is recommene. STANDARD ACCESSORIES FOR FRS-45 SAW-2018 SAW-2024 F-704 F-706 AO-30 CASE-T431 Sw Ble 1 Sw Ble 1 4mm Hex. Pin Wrench 1 6mm Hex. Pin Wrench 1 Oil 1 Steel Cse 1

76 Fuji Mrking Pen fetures lower vibrtion level when compre to conventionl mrking pens enbling opertors to use this tool for full working y. This tool lso requires no lubriction n meets requirements where oil free opertion is specifie. G-400 Dimeter Overll Length Air Consumption (t Lo) mm in mm in kg lb m 3 /min ft 3 /min G / / Fuji Air Cleners remove ust, chips, swust, wter n oil with their powerful vcuum ction. AC-200F FJP-500 Outsie Di. of Vcuum Degree Overll Length Dischrge Mx. Air Consumption Air Inlet Thre mm Hg in Hg mm in mm kg lb m 3 /min ft 3 /min BSP or NPT mm in AC-200F / / / /8 FJP / / / /8 Air Hose Accessories Provie for AC-200F Inex No. AC No. Nme 1 ACB-1F Min Nozzle 2 ACB-2F Fn Shpe Nozzle 3 ACB-3F Smll- En Nozzle 4 ACB-4F Flexible Hose 5 ACB-5F Rubber Joint 6 ACB-6F Dust Bg 7 ACB-7F Hose Bn 6

77