Reproduction. Not for. Champion Series Zero-Turn Riders & Mower Decks. Parts Manual. Products. Manual Part No

Transcription

1 Parts Manual Products Champion Series Zero-Turn Riders & Mower Decks Mfg. No. Description Champion 2044, 20HP Kohler Zero-Turn Rider w/ 44" Mower Champion 2050, 20HP Zero-Turn Rider w/ 50" Mower Champion 2050CE, 20HP Zero-Turn Rider w/ 50" Mower (CE/Export) Champion 2044CE, 20HP Zero-Turn Rider w/ 44" Mower (CE/Export) Champion 2050CE, 20HP Zero-Turn Rider w/ 50" Mower (CE/Export) Champion 2650, 26HP Zero-Turn Rider w/ 50" Mower Champion 2652, 26HP Zero-Turn Rider w/ 52" Mower Champion 2752 ANSI-EXP, 27HP Zero-Turn Rider w/ 52" Mower Champion 2752CE (3000Z), 27HP Zero-Turn Rider w/ 52" Mower (CE/Export) Champion 2752, 27HP Zero-Turn Rider w/ 52" Mower Champion 2750, 27HP Zero-Turn Rider w/ 50" Mower Champion 2552CE (3000Z), 25HP Zero-Turn Rider w/ 52" Mower (CE/Export) Champion 2550, 25HP Zero-Turn Rider w/ 50" Mower Revision AN Manual Part No. Rev. Date: 7/17/2015

2

3 Table Of Contents PRODUCT COMPONENTS Main Frame & Front Suspension Group... 4 Bumper Group... 6 Engine Group - Briggs & Stratton PS & CT... 8 Engine Group - Briggs & Stratton Vanguard Engine Group - Kohler Pump Drive Group Hydraulic Group Hydraulic Pump SERVICE PARTS - BDP/PG Series Control Group Panel Control Group Upper Control Group Lower Electrical Group Seat & Kickplate Group - B&S Professional Series Seat & Kickplate Group - Kohler & B&S Vanguard Fuel Supply Hose & Tank Replacement Parts Group Fuel Tank Group Brake Group Rear Suspension Group Lift Group Wheel & Tire Group Decals Group - Brand & Model Decals Group - Safety & Common - Domestic Decals Group - Safety & Common - Export Evap Canister Group " & 50" Mower Deck - Belt & Idler Group - B&S Professional Series " & 50" Mower Deck - Belt & Idler Group - Kohler & B&S Vanguard " & 50" Mower Deck - Front Rollers & Baffles " & 50" Mower Deck - Housing, Arbors & Blades Group - Kohler & B&S Vanguard " & 50" Mower Deck - Housing, Arbors, & Blades Group - B&S Professional Series " Mower Deck - Rear Roller & Linkage ", 50" & 52" Mower Deck - Deck Hangers & Puller Bars " Mower Deck - Rear Roller & Linkage " Mower Deck - Belts & Idler Group " Mower Deck - Housing, Covers, Spindles & Blades Group " Mower Deck - Rollers Group Torque Specification Chart... Inside Back Cover PAGES

4 Main Frame & Front Suspension Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 276FRM Champion 2552CE 4

5 Main Frame & Front Suspension Group REF NO PART NO. QTY CSM SM SM SM SM SM SM SM CSM CSM SM SM SM X56SM SM SM SM X30SM X14SM SM SM SM CSM X6SM CSM DESCRIPTION WELD, MAIN FRAME, SMI (Kohler / Briggs & Stratton Vanguard) BUSHING, FLANGE SHOCK, SPRING ASSEMBLY DECK FRICTION REDUCER PLATE (S/N: & Below) SPACER,.76X 1.50 X.79 SPACER,.75 X 1.00 X 2.38 PIVOT BEARING, 1.00" X 1.125" OD X 1.50" CAP, VINYL X 1-1/2 WELD,CASTER YOKE WELD, PIVOTING FRONT END - ORG NUT, 5/16-18 HEX NYLOCK FLANGE WASHER, 5/16" SAE NUT, 3/4-16 HEX NYLON LOCK BOLT, GD5, YZ, 3/4-16 X 7" WASHER, 3/4" SAE NUT, 5/16-18 HEX (Qty: 8 used w/ Qty: 4 used w/ ) SCREW, 5/16-18 X 1", PHILLIPS HD, BZ (Qty: 8 used w/ Qty: 4 used w/ ) BOLT, 5/16-18 X 3-3/4 GD5 BOLT, 5/16-18 X 1-3/4" GD5 YZ COLLAR, 1" SPLIT PIVOT BEARING, 1.00" X 1.125" OD X.50" GREASE FITTING, 1/4-28 STRAIGHT PLATE, DECK STOP BOLT, 5/16-18 X 3/4" GD5 WELD, MAIN FRAME, SMI (Briggs & Stratton ELS) PAD, FRICTION,.375 X 1.25 X 4.00 (S/N: & Above) Footnotes Champion 2552CE 5

6 Bumper Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 276BMP Champion 2552CE 6

7 Bumper Group REF NO PART NO. QTY SM SM X8SM CSM CSM SM CSM CSM CYP 1 DESCRIPTION NUT, 3/8-16 HEX NYLOCK FLANGE WASHER, 3/8" GD.9 FLAT BOLT, 3/8-16 X 1" GD5 YZ WELD, BUMPER (Kohler Models) WELD, BUMPER (Briggs & Stratton Vanguard Models) PLUG, PANEL, BLACK WELD, BUMPER (Briggs & Stratton ELS Models) WELD, BUMPER (Model : S/N: & Below; Models : S/N: & Below) WELD, BUMPER (Model : S/N: & Above; Models : S/N: & Above) Footnotes Champion 2552CE 7

8 Engine Group - Briggs & Stratton PS & CT NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 276ENGB Champion 2552CE (3000Z) 8

9 Engine Group - Briggs & Stratton PS & CT REF NO PART NO. QTY CSM SM SM X8SM SM SM X SM X6SM SM SM CSM SM SM X18SM SM SM SM X6SM YP X8SM DESCRIPTION PLATE, CLUTCH ANCHOR CLUTCH ANCHOR PAD WASHER,.34 X 1.25 X 10 GA BOLT, 5/16-18 X 1" GD5 YZ NUT, 5/16-18 HEX NYLOCK FLANGE WASHER, 5/16" SAE KEY, 1/4" SQ. X 2 1/4 (** X8SM for clutches that have built-in keys.) NUT, 1/4-20 HEX SERR. FLANGE SPACER,.45 X 1.88 X.38 BOLT, 5/16-18 X 3/4" GRD5 NUT, 5/16-18 HEX LG SERR FLG. BOLT, CRANKSHAFT, 7/16-20 X 3-1/4" PLATE, HEAT SHIELD - ORG * CLUTCH, # ,ELECTRIC, 1" SHAFT MUFFLER, B&S-ELS (Model : S/N: & Below; Models : S/N: & Below) MUFFLER, B&S, ELS & COMM TURF (Model : S/N: & Below; Models : S/N: & Below) ENGINE, BRIGGS & STRATTON BOLT, 5/16-18 X 2-1/4" GD5 YZ HOSE, OIL DRAIN WASHER, 5/16" INT. TOOTH LOCK CLAMP, VINYL INSULATED BOLT, 1/4-20 X 3/4" GD5 YZ EXTENSION, TAILPIPE, 3" - BLK SCREW GASKET, EXHAUST SCREW, SEM HEX HEAD PRE CLEANER (SV) AIR CLEANER W/ PRE CLEANER (SV) OIL FILTER (SV) (NOT SHOWN) COVER, STATIC/LABEL ASSY (NOT SHOWN - S/N: & Below) SCREW, PAN HEAD THREAD ROLLING (NOT SHOWN - S/N: & Below) BELLEVILLE WASHER X.442 X.089 (S/N: & Above) Footnotes Note:* If replacing PTO clutch also order X8SM key Champion 2552CE (3000Z) 9

10 Engine Group - Briggs & Stratton Vanguard NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 276ENGB0 10

11 Engine Group - Briggs & Stratton Vanguard REF NO PART NO. QTY. DESCRIPTION CSM 1 PLATE, CLUTCH ANCHOR SM 1 CLUTCH ANCHOR PAD SM 3 WASHER,.34 X 1.25 X 10 GA X8SM 5 BOLT, 5/16-18 X 1" GD5 YZ SM 9 NUT, 5/16-18 HEX NYLOCK FLANGE SM 14 WASHER, 5/16" SAE X18 1 KEY, 1/4" SQ. X 2 1/ CSM 2 BRACKET,SUPPORT,MUFFLER SM 1 SPACER,.45 X 1.62 X X6SM 4 BOLT, 5/16-18 X 3/4" GRD SM 4 NUT, 5/16-18 HEX LG SERR FLG SM 1 BOLT, CRANKSHAFT, 7/16-20 X 3-1/4" CSM 1 PLATE, HEAT SHIELD - ORG SM 1 CLUTCH, # ,ELECTRIC, 1" SHAFT SM 1 MUFFLER, ACS * ENGINE, BRIGGS VANGUARD X18SM 4 BOLT, 5/16-18 X 2-1/4" GD5 YZ SM 1 HOSE, OIL DRAIN SM 2 WASHER, 5/16" INT. TOOTH LOCK SM 1 CLAMP, VINYL INSULATED X6SM 1 BOLT, 1/4-20 X 3/4" GD5 YZ SM 1 NUT, 1/4-20 HEX SERR. FLANGE Footnotes Note:* See your local Briggs & Stratton distributor for parts and service. 11

12 Engine Group - Kohler NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 276ENGK0 12

13 Engine Group - Kohler REF NO PART NO. QTY CSM SM SM X8SM SM SM X SM SM SM X SM SM SM X6SM SM SM 1 DESCRIPTION PLATE, CLUTCH ANCHOR CLUTCH ANCHOR PAD WASHER,.34 X 1.25 X 10 GA BOLT, 5/16-18 X 1" GD5 YZ NUT, 5/16-18 HEX NYLOCK FLANGE WASHER, 5/16" SAE KEY, 1/4" SQ. X 2 1/4 SPACER,.45 X 1.62 X.37 BOLT, CRANKSHAFT, 7/16-20 X 3-1/4" CLUTCH, # ,ELECTRIC, 1" SHAFT BOLT, 5/16-18 X 2-1/4" GD5 YZ HOSE, OIL DRAIN * ENGINE, KOHLER COURAGE BOLT, 3/8-16 X 1", SELF-TAPPING CLAMP, VINYL INSULATED BOLT, 1/4-20 X 3/4" GD5 YZ NUT, 1/4-20 HEX SERR. FLANGE WASHER, 5/16" INT. TOOTH LOCK Footnotes Note:* See your local Kohler distributor for parts and service. 13

14 Pump Drive Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart Champion 2552CE 14

15 Pump Drive Group REF NO PART NO. QTY SM SM SM X14SM SM SM CSM SM X8SM SM CSM SM YP X20SM YP X32SM YP SM YP YP YP SM SM SM SM SM SM SM SM X32SM YP SM YP YP YP SM 4 DESCRIPTION PULLEY, CRANKSHAFT, ID X 4.25 OD PULLEY, IDLER, 4.06OD,.669ID,.75W STL SPACER, HYDRO PULLEY BOLT, 3/8-16 X 1-3/4 GD5 WASHER, 3/8 SAE NUT, 3/8-16 HEX NYLOCK FLANGE (Qty: 5 - S/N: & Below) WELD, ANCHOR EYEBOLT SPRING, EXTENSION, 1.00 (coil-to-coil measurement: 6.13" (15.6 cm)) BOLT, 3/8-16 X 1 GD5 YZ NUT, 3/8-16 HEX PLATE,ANCHOR,SPRING WASHER, 3/8 GD.9 FLAT PULLEY, SINGLE FLANGED, 4"ODX3/8"ID BOLT, 3/8-16 X 2-1/2 GD5 YZ BEARING, BALL, AXLE (S/N: & Above) BOLT, 1/2-13 X 4 GD5 YZ (S/N: & Above) WASHER,.52 X 1.75 X.14, CZ (S/N: & Above) NUT, 1/2-13 HEX NYLOCK FLANGE (S/N: & Above) SPACER,.52 X.84 X 1.53, PM (S/N: & Above) ASSM, IDLER ARM, PUMP DRIVE, 1/2ID, CAST (SV) (S/N: & Above)( A) SPACER, IDLER ARM, 1/2, PM (S/N: & Above) BELT, HA-SEC, 72.4EL, ARAMID, WRPD EYE BOLT, 3/8-16 X 4, 2.13THRD, 1 EYE,CZ PULLEY, DRIVE PUMP KEY, 5MM SQ. W/ RADIUS WASHER, 1/4 LOCK CAPSCREW-HEX HEAD M6-1.0X 14MM WASHER,.265 X 1.50 X.109, YZ BUSHING, BRASS, 1.25X1X1.25 BOLT, 3/8-16 X 4 GD5 CZ SPACER,.39 X 1.00 X 2.55, SS WASHER,.41 X 1.75 X.14 NO LONGER AVAILABLE, USE ITEM # 35 ASSM, IDLER ARM, PUMP DRIVE, 3/8ID, CAST (SV) (Includes items #15, 35, & 36) SPACER,.39 X.88 X 1.53, CZ SPACER, IDLER ARM, T-STYLE, CZ SET SCREW, 5/16-27 X 3/8, KNURL, W/ PATCH (SV) Footnotes Champion 2552CE 15

16 Hydraulic Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 276HYD Champion 2552CE 16

17 Hydraulic Group REF NO PART NO. QTY SM SM SM X8P5SM SM X27SM SM SM SM SM SM SM SM SM SM SM X7P5SM X1SM X X10SM SM SM X6SM SM X10SM SM SM -- DESCRIPTION CAP, HYDRAULIC RESERVOIR TANK, 2 QT HYDRAULIC CLAMP, HOSE, 7/8 HOSE, 3/8" PUSH-LOCK, 8.50" FITTING, TEE, 1/2" HOSE HOSE, 3/8 PUSH-LOCK, 27 HOSE ASSEMBLY (19") ADAPTER, HYD. MOTOR, WHEEL ADAPTER, 90 DEG, 9/16-3/8 BARB CLAMP, HOSE PE, 10CC HYDRAULIC PUMP - LH ADAPTER, HYD. FILTER, OIL FILTER HEAD, HYDRAULIC HOSE, 5/8 PUSH-ON, 12.50" LONG ADAPTER, TEE, 9/16-3/8 BARB HOSE, 3/8" PUSH-LOCK, 7.50" PE, 10CC HYDRAULIC PUMP - RH KEY NUT, CASTLE PIN, COTTER, 1/8" X 1-1/4 ADAPTER, 90 DEG, 9/16-5/8 BARB CLAMP, #10 HOSE, STAINLESS BOLT, 1/4-20 X 3/4" GD5 YZ WASHER, 1/4" LOCK WASHER, 1/4 SAE ( ) BOLT, 3/8-16 X 1-1/4" GD5 NUT, 3/8-16 HEX SERRATED FLANGE KIT, Castle Nut & Cotter Pin Footnotes Champion 2552CE 17

18 Hydraulic Pump SERVICE PARTS - BDP/PG Series NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 276PMP Champion 2552CE 18

19 Hydraulic Pump SERVICE PARTS - BDP/PG Series REF NO PART NO. QTY. DESCRIPTION SM 1 Housing Kit SM 1 End Cap Kit (W/ Poppets, Standard Charge) (Includes Ref. No. 66) SM 1 Straight Headless Pin SM 4 Hex Flange Bolt M X 60mm LG SM 1 Housing O-Ring SM 1 Charge Pump Kit (STD) (Includes Ref. Nos. 7 & 8) * STD Gerotor Assy (11 cu. In/rev D-Drive) * O-Ring SM 2 Socket Head Screw M6 x mm Lg (STD Charge) SM 1 Bypass Valve Kit (Blank) SM 1 Pump Shaft Kit (Blind 15mm Keyway W/ Std Charge) (Includes Ref. No. 19) * Ball Bearing 17 x 40 x SM 1 Lip Seal 17 x 40 x 7 PTC SM 1 Spacer SM 1 Retaining Ring SM 1 Cylinder Block Kit SM 1 Block Spring SM 1 Block Thrust Washer SM 1 Valve Plate (Steel N-Tec:Black) SM 1 Swashplate SM 1 Ball Thrust Bearing SM 1 Trunnion Arm, Tapered Square SM 1 Slot Guide SM 2 Check Valve Kit (0.031"Orifice) SM 1 Charge Relief Valve Kit (1/4" Plastic Ball & Spring) SM 1 Trunnion Seal / Retainer Kit SM 1 Straight Thread Plug * 5/16" SAE Plug * Arm,Control * Spacer RTN * Washer.34 x.88 x * Nut, Hex Lock 5/16-24 UNF SM 1 ** Kit, RTN, STD SM 1 Overhaul Seal Kit (Not Shown) Footnotes Note:* Not a serviceable part. Note:** Includes Ref. Nos. 94, 98, 100, 101, 102, 103, 104, 104, 105, 106 & Champion 2552CE 19

20 Control Group Panel NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 276INS Champion 2552CE 20

21 Control Group Panel REF NO PART NO. QTY SM X6SM SM SM ASM SM ASM SM SM SM SM 1 12a b SM SM X6SM SM SM SM SM SM SM SM SM SM SM SM SM 1 DESCRIPTION BODY CLIP, 1/4-20 X 1/2" DEEP SCREW, 1/4-20 X 3/4" ALLEN BH CABLE, CHOKE CONTROL, 43.5" (Briggs & Stratton Vanguard Models) CABLE, THROTTLE CONTROL, 36" (Briggs & Stratton Models) BRACKET, LOCK O-RING, 7/8" ID X 1/16" W PLATE, CONTROL PANEL PLUG,.820X1.44 HOLE, BLACK PLASTIC RING, SWITCH RETAINER SWITCH, BLADE ENGAGEMENT SWITCH, IGNITION, 6 POST * HOUR METER, ASSEMBLY ( ) (S/N: & Above) METER-HOUR DIGITAL (S/N: & Below) NUT, 1/4-20 HEX NYLON LOCK BOLT, 1/4-20 X 3/4" GD5 YZ NUT, 3/8-24 HEX KEYS. BLISTER PK KIDS+MWRS DON'T MIX (Domestic Models) COVER, SWITCH NUT-HEX FLANGE 5/8-32 IGN SW DIE CAST CABLE, CHOKE CONTROL, 30.5"\ (Kohler Models) CABLE, THROTTLE CONTROL, 27.5" (Kohler Models) SCREW, #10-24 X 1" RS NUT, #10-24 HEX NYLON LOCK KNOB, THROTTLE CABLE, CHOKE CONTROL, 51" (Briggs & Stratton ELS Models) KEYS, BLISTER PK KIDS+MWRS DON'T MIX (CE MODELS) LOCKWASHER, INTERNAL TOOTH.625 THIN BLK Footnotes Note:* When replacing this hour meter, please call our service department at ext Champion 2552CE 21

22 Control Group Upper NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 276MCG Champion 2552CE 22

23 Control Group Upper REF NO PART NO. QTY SM SM X14SM SM X4SM SM X8SM SM SM X16SM SM X14SM X20SM SM SM SM SM CSM CSM SM A CSM CSM SM CSM SM SM 4 DESCRIPTION BEARING, BRONZE FLANGE, 3/4 BEARING, FLANGE BOLT, 3/8-16 X 1-3/4" GD5 NUT, 3/8-16 HEX NYLOCK FLANGE SCREW, #10-24 X 1/2" ROUND PHILLIPS NUT, #10-24 HEX BOLT, 3/8-16 X 1" GD5 YZ SWITCH, PLUNGER, N.O./N.C. BOLT, 3/8-16 X 1-1/4 SHCS (SOCKET HEAD) BOLT, 5/16-18 X 2" GD5 TFL NUT, 5/16-18 HEX SERRATED FLANGE (LARGE) BOLT, 5/16-18 X 1-3/4" GD5 TFL BOLT, 5/16-18 X 2-1/2" GD5 YZ WASHER, 5/16" SAE NUT, 5/16-18 HEX NYLOCK FLANGE NUT, 3/8-16 HEX NYLON LOCK SCREW-HEX WZ LOCK FLNG 5/16-18X0.750BLK WELD, CONTROL SHAFT - RH - ORG (Not Shown) WELD, CONTROL SHAFT - LH - ORG GRIP, FOAM, 3/4" ID, 16" LONG MOUNT, CONTROL ARM - BLK WELD, HANDLE MOTION CONTROL-LH WELD, HANDLE MOTION CONTROL-RH (Not Shown) SPACER,.39 X.63 X 1.50 WELD,PLATE,NEUTRAL BOLT, 5/16-18 X 1 1/2" FLANGE NUT, 5/16-18 HEX SERRATED FLANGE (LARGE) Footnotes Champion 2552CE 23

24 Control Group Lower NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 276MCG Champion 2552CE 24

25 Control Group Lower REF NO PART NO. QTY SM X9SM SM SM SM SM X10SM SM SM SM X8SM SM SM SM SM SM SM SM SM SM SM SM YP SM SM SM 2 DESCRIPTION COLLAR, 3/8" SET PIN, CLEVIS, 3/8" X 1-1/8" PIN, HAIR,.0585" X 1-1/8" SPRING, CONTROL ROD BUSHING, NYLON NUT, 5/16-18 HEX NYLON LOCK BOLT, 5/16-18 X 1-1/4" GD5 YZ WASHER, 5/16" SAE NUT, 5/16-24 HEX NUT, 5/16-24 HEX NYLON LOCK BOLT, 5/16-18 X 1" GD5 YZ NUT, 5/16-24 HEX, LH BOLT, M X 35MM, GD8.8 NUT, M NYLON LOCK, CZ NUT, M SERR. FLANGE, CZ SPRING, REVERSE RETURN COLLAR, 5/16" SET CLEVIS 3/8-24, PLASTIC ROD, NEUTRAL CONTROL, 8 DAMPENER BALL JOINT, 5/16-24, LH FEMALE BALL JOINT, 5/16-24, FEMALE ROD, 5/16 X 8.38, LH-RH, CZ WELD, CONTROL ROD SLIDING NUT, 3/8-24 HEX NUT, 5/16-18 HEX NYLOCK FLANGE Footnotes Champion 2552CE 25

26 Electrical Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 276EGS Champion 2552CE 26

27 Electrical Group REF NO PART NO. QTY SM SM SM SM SM SM SM SM SM SM SM SM SM SM SM SM X6SM SM SM SM SM SM SM YP SM 1 DESCRIPTION SWITCH ASMY-IGNITION INDAK NO KEYS KEYS, BLISTER PK KIDS+MWRS DON'T MIX (Domestic Models) COVER PLASTIC NUT HOUR METER, DIGITAL (Includes Retaining Ring) SWITCH, PTO WIRE HARNESS, SNAPPER Z BATTERY CABLE, POSITIVE, 22" SWITCH, SEAT, GRAY, NC (BOLT IN) SWITCH, SEAT, GRAY, NC (TWIST IN) BOLT, HEX WASHER HEAD PLASTITE, 1/4 X 1/2 CABLE TIE-PUSH MOUNT CIRCUIT BREAKER, 20A WASHER, 1/4 SAE ( ) NUT, HEX JAM, 5/16-24 WASHER, LIGHT LOCK, 5/16 SOLENOID-4 POLE 12 VOLT DC (TROMBETTA) BOLT, 1/4-20 X 3/4" GD5 YZ NUT, 1/4-20 HEX SERR. FLANGE GROMMET, 7/8 BATTERY CABLE, NEGATIVE, 22" BATTERY, WET ( BCIU1, 340 CCA) BATTERY CABLE, POS, 15, 1/4-5/16 STRAP-BLACK RUBB SWITCH, PLUNGER, N.O./N.C. SWITCH, DP NO/NC SNAP-IN KEYS, BLISTER PK KIDS+MWRS DON'T MIX, EXP, CE MODELS ONLY (CE Models) Footnotes Champion 2552CE 27

28 Seat & Kickplate Group - B&S Professional Series NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 276skp Champion 2552CE (3000Z) 28

29 Seat & Kickplate Group - B&S Professional Series REF NO PART NO. QTY CSM X8SM SM SM SM SM SM SM SM SM SM CSM CSM CSM SM SM SM CSM SM SM X6SM X8SM X40SM X32SM SM SM X1SM SM SM CSM 1 DESCRIPTION MOUNT, OIL FILTER - ORG BOLT, 5/16-18 X 1 GD5 YZ WASHER, 5/16 GD.9 FLAT NUT, 5/16-18 HEX NYLOCK FLANGE SPRING, SEAT SUPPORT WASHER, 3/8 SAE SAFETY WALK, FLOOR PLATE, X SAFETY WALK, FLOOR REST, X 6.00 SEAT, XB-180, NO LOGO, BLACK NUT, 5/16-18 HEX NYLON LOCK NUT, 3/8-16 HEX NYLOCK FLANGE WELD, SEAT PLATE - ORG PLATE, FLOOR, CONSUMER Z - ORG (50" Models Only) PLATE, FLOOR, FRONT, CONS Z MNT, VBRTN, 30 DURO MNT, VBRTN, RBBR BOLT, 3/8-16 X 5/8, SERRATED UNDER HEAD PLATE, SUPPORT, FRONT FLOOR WASHER, 5/16 SAE NUT, 3/8-16 HEX SERRATED FLANGE BOLT, 5/16-18 X 3/4 GD5 BOLT, 3/8-16 X 1 GD5 YZ BOLT, 3/8-16 X 5" GD5 YZ BOLT, 3/8-16 X 4 GD5 YZ ARM REST, SET OF TWO (SV) SPRING, EXTENSION, SEAT ADJUSTMENT (BLK OR SLVR) (SV)(Not an illustrated part.) (3-1/2" Total unstretched length) KIT, SEAT RAILS. COMPLETE (SV) NUT, 3/8-16 HEX NYLOCK FLANGE WASHER, 3/8" ID, INTERNAL TOOTH PLATE, FLOOR, CONSUMER Z - ORG (52" Models Only) Footnotes Champion 2552CE (3000Z) 29

30 Seat & Kickplate Group - Kohler & B&S Vanguard NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 276SKP0 30

31 Seat & Kickplate Group - Kohler & B&S Vanguard REF NO PART NO. QTY SM CSM SM CSM SM CSM X8SM SM X32SM SM SM X8SM SM SM X40SM SM SM 1 DESCRIPTION SAFETY WALK, X PLATE, FLOOR DETAIL SAFETY WALK, X 6.00 WELD, SEAT PLATE - ORG SEAT, XB-180, NO LOGO, BLACK MOUNT, OIL FILTER - ORG BOLT, 3/8-16 X 1" GD5 YZ NUT, 3/8-16 HEX NYLOCK FLANGE BOLT, 3/8-16 X 4" GD5 YZ SPRING, SEAT SUPPORT WASHER, 5/16" GD.9 FLAT BOLT, 5/16-18 X 1" GD5 YZ NUT, 5/16-18 HEX NYLOCK FLANGE WASHER, 3/8" SAE BOLT, 3/8-16 X 5" GD5 YZ NUT, 5/16-18 HEX NYLON LOCK SPRING, EXTENSION, SEAT ADJUSTMENT (BLK OR SLVR) (SV)(Not an illustrated part.) (3-1/2" Total unstretched length) Footnotes 31

32 Fuel Supply Hose & Tank Replacement Parts Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 276FSG Champion 2552CE 32

33 Fuel Supply Hose & Tank Replacement Parts Group REF NO PART NO. QTY. DESCRIPTION SM 2 CLAMP, HOSE, EXTERNAL, 1/2 - RED X22SM 1 HOSE, 1/4" FUEL, 22.00" (Kohler / Briggs & Stratton Vanguard) SM 1 ELBOW FITTING SM 1 GROMMET SM 2 HOSE CLAMP X26SM 1 HOSE, 26" SM 1 SCREEN FITTING X31SM 1 HOSE, 1/4" FUEL, (Briggs & Stratton ELS) X25 1 HOSE, 1/4" FUEL, 25.00" (Briggs & Stratton ELS) Footnotes Champion 2552CE 33

34 Fuel Tank Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 276TNK Champion 2552CE 34

35 Fuel Tank Group REF NO PART NO. QTY X6SM SM SM X4SM SM SM X8SM 4 8a SM 1 8b SM 1 8c SM 1 8d SM CSM CSM CSM 1 12a b SM SM CSM SM SM SM X1SM 1 DESCRIPTION BOLT, 5/16-18 X 3/4" GD5 WASHER, 5/16" SAE NUT, 5/16-18 HEX NYLOCK FLANGE SCREW, 1/4-20 X 1/2" ALLEN BH SCREW, #10-24 X 3/8" ALLEN BHBZ WASHER, 5/16" LOCK BOLT, 5/16-18 X 1" GD5 YZ TANK,FUEL,LH (S/N: & ABOVE) TANK,FUEL,LH (S/N: ) TANK,FUEL,LH (S/N: ) TANK,FUEL,LH (S/N: & BELOW) PLATE,FUEL TANK BADGE BRACKET, REAR SUPPORT - RH BRACKET, REAR SUPPORT - LH - ORG FUEL CAP, 3-1/2", MANAGED VENT OUT, 12" (S/N: & ABOVE) CAP, FUEL TANK, 3-1/2" NECK (S/N: & BELOW) TANK,FUEL,RH PLATE, SUPPORT, REAR TANK TANK, 2 QT HYDRAULIC CAP, HYDRAULIC RESERVOIR FUEL GAUGE (NOT SHOWN) GROMMET (NOT SHOWN) Footnotes Champion 2552CE 35

36 Brake Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 276PBR Champion 2552CE 36

37 Brake Group REF NO PART NO. QTY. DESCRIPTION CSM 1 WELD, SHAFT, REAR BRAKE SM 1 BRAKE SHOE ASM, LH, KNOTT SM 2 HUB W/ STUDS, 1" TAPER (Replaced by Ref. No 43) SM 2 BRAKE DRUM, 4 BOLT, KNOTT (Replaced by Ref. No 43) SM 1 BRAKE SHOE ASM, RH, KNOTT (Not Shown) SM 4 BEARING, BRONZE FLANGE, 3/ SM 1 GRIP, BLACK FLEXIBLE CSM 1 WELD,SHAFT,BRAKE LEVER CSM 1 WELD,MOUNT,BRAKE LEVER - ORG CSM 3 PIVOT, LINKAGE MOUNT WELDMENT SM 5 NUT, 5/16-24 HEX SM 5 NUT, 3/8-16 HEX SERRATED FLANGE CSM 2 LINK, BRAKE LOCK - ORG CSM 1 HANDLE, BRAKE LEVER - ORG YP 2 SWITCH, DP NO/NC SNAP-IN CSM 1 BRACKET, SWITCH MOUNT SM 5 WASHER, 5/16" SAE SM 4 NUT, 5/16-18 HEX NYLOCK FLANGE SM 1 * CABLE, PARKING BRAKE SM 1 ADJUSTER, BRAKE LINKAGE SM 1 WASHER, 5/16 USS X6SM 1 PIN, COTTER, 3/32" X 3/ SM 2 SPRING, BRAKE X12SM 4 BOLT, 1/4-20 X 1-1/2", GD SM 4 NUT, 1/4-20 HEX SIDE LOCK X18SM 1 BOLT, 3/8-16 X 2-1/4" GD X6SM 4 BOLT, 3/8-16 X 3/4" GD5 YZ SM 10 NUT, 3/8-16 HEX NYLOCK FLANGE X8SM 4 BOLT, 5/16-18 X 1" GD5 YZ X5SM 2 BOLT, 1/4-20 X 5/8" GD5 YZ WASHER, 1/4 SAE ( ) SM 2 NUT, 1/4-20 HEX SERR. FLANGE SM 1 BOLT, 3/8-16 X 3/8", 1/2" SHOULDER SM 1 SPRING, COMPRESSION, 5-1/ X16SM 1 BOLT, 3/8-16 X 2" GD5 TFL CZ SM 4 COLLAR, 3/8" SET SM 2 ROD, BRAKE ADJUSTMENT X8SM 4 BOLT, 3/8-16 X 1" GD5 YZ SM 12 WASHER, 1/4" LOCK SM 2 SPACER,.38 X.50 X SM 12 CAPSCREW,HEX HEAD M6-1.0X 14MM CSM 1 LINK, BRAKE LOCK SM 2 BRAKE DRUM, 4-BOLT (Replaces Ref. Nos. 3 & 4) CYP 1 PLATE, SUPPORT, FRAME, CONZ - EU - ORG (CE Models S/N: & Above Only) Footnotes Note:* Parking brake cable is routed through hole in Engine Deck Champion 2552CE 37

38 Brake Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 276PBR Champion 2552CE 38

39 Brake Group REF NO PART NO. QTY SM SM CYP CYP X8SM SM SM SM 1 DESCRIPTION COVER, VINYL HANDLE (CE Models S/N: & Above Only) SPRING-EXT,.500 OD X 3.50 LG X.058 WR (CE Models S/N: & Above Only) WELD, HANDLE, BRAKE, CONZ - EU - ORG (CE Models S/N: & Above Only) LEVER, BRAKE, CONZ - EU - ORG (CE Models S/N: & Above Only) BOLT, 5/16-18 X 1 GD5 CZ (CE Models S/N: & Above Only) WASHER, 5/16 SAE (CE Models S/N: & Above Only) WASHER, WAVE, M10 (CE Models S/N: & Above Only) NUT, 5/16-18 HEX NYLOCK FLANGE (CE Models S/N: & Above Only) Footnotes Note:* Parking brake cable is routed through hole in Engine Deck Champion 2552CE 39

40 Rear Suspension Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 276SUS Champion 2552CE 40

41 Rear Suspension Group REF NO PART NO. QTY SM SM CSM SM SM CSM CSM SM X SM SM SM X20SM YP SM SM SM SM X14SM X8SM 16 DESCRIPTION SPACER,.34 X 1.54 X.25 UHMW GREASE FITTING, 1/4-28 STRAIGHT SHOCK WELD, TIE BAR, ORANGE BUSHING, FLANGE SPACER,.52 X 1.00 X 5.00 WELD, TRAILING ARM, RH, ORANGE WELD, TRAILING ARM, LH, ORANGE WASHER, 1/2" SAE BOLT, 1/2-13 X 6-1/2 GD8, YZ NUT, 1/2-13 HEX NYLOCK FLANGE WASHER, 3/8" SPLIT LOCK SPACER,.39 X 1.00X.63 BOLT, 3/8-16 X 2-1/2" GD5 YZ SCREW, 5/16-18 X 1, PHILLIPS HD, BZ NUT, 5/16-18 HEX NYLOCK FLANGE WASHER, 3/8" GD.9 FLAT WASHER, 3/8" FENDER NUT, 3/8-16 HEX NYLOCK FLANGE WASHER,.41 X 1.75 X.14 BOLT, 3/8-16 X 1-3/4" GD5 BOLT, 3/8-16 X 1" GD5 YZ Footnotes Champion 2552CE 41

42 Lift Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart A Champion 2552CE 42

43 Lift Group REF NO PART NO. QTY X X X C C X X X X C C C C C C C X8 2 DESCRIPTION SPACER,.38 X.50 X.38, CZ WASHER, 3/8 SAE NUT, 3/8-24 HEX (44" & 50" Models Only) PIN, COTTER, 1/8 X 3/4 NUT, 3/8-16 HEX NYLOCK FLANGE PIN, COTTER, 3/32 X 3/4 (44" & 50" Models Only) COVER, VINYL HANDLE SPACER,.76 X 1.00 X 1.00 SPACER,.76 X 1.00 X.50, CZ BEARING, BRONZE FLANGE, 3/4" BALL JOINT ROD, LEVER CONNECTING, CZ (44" & 50" Models Only) NUT, 3/8-16 HEX NYLOCK FLANGE WASHER,.41 X 1.75 X.14 BOLT, 3/8-16 X 1-1/2 GD5 YZ CLEVIS 3/8-24, PLASTIC (44" & 50" Models Only) LINK, ROLLER REVERSE (44" & 50" Models Only) NUT, 3/8-24 HEX JAM WASHER, 3/8 SAE HITCH PIN ASSEMBLY, 1/2" X 2.50" WELD, COMPENSATOR ASSM. - ORG WASHER, 5/16 SAE SPRING-COMP,.594ID X 2.68LG X.080WR NUT, 5/16-18 HEX NYLOCK FLANGE BOLT, 3/8-16 X 2-1/4 GD5 YZ BOLT, 5/16-18 X 3/4 GD5 BOLT, 3/8-16 X 1-1/4 GD5 BOLT, 3/8-16 X 3/4 GD5 YZ WELD, QUICK RELEASE HANDLE, REAR - ORG. WELD, QUICK RELEASE HANDLE - ORG WASHER,WAVE,M10 GRIP, BLACK FLEXIBLE BEARING, BRONZE FLANGE, 3/4 WELD, DECK LIFT HANGER REAR - ORG LINK, DECK LIFT - ORG WELD, DECK HEIGHT SHAFT - ORANGE WELD, DECK LOCK SPRING-EXT,.500 OD X 3.50 LG X.058 WR SPACER,.39 X.63 X 1.50, CZ PLATE, DECK HEIGHT- INNER -ORG SLEEVE,.32 X.63 X 1.50, TAPPED 3/8-24 BALL JOINT, 3/8-24 MALE PIN, CLEVIS, 3/8 X 1, CZ (44" & 50" Models Only) Footnotes Champion 2552CE 43

44 Wheel & Tire Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 276WHL Champion 2552CE 44

45 Wheel & Tire Group REF NO PART NO. QTY X1SM SX2SM SM X1SM SM SM X52SM SM X1SM X2SM SM SM SM X2SM 2 DESCRIPTION USE YP - WHEEL, CASTER, 11 X 4-5 SILVER, BEAD LOCK (Max PSI: 25) (S/N: & Below) (Replacement for YP is X2YP) TIRE, FRONT, 11 X WHEEL ASSEMBLY, COMPLETE VALVE STEM & CAP ASSEMBLY BEARING, CASTER WHEEL, 11 X BEAD LOCK (SV) (2 Per Tire) BEARING RETAINER (2 Per Tire) AXLE, FRONT CASTER BOLT, 1/2-13 X 6-1/2 NUT, HEX NYLON LOCK, 1/2-13 TIRE ASSM, 20X NHS, TM, OFFS TIRE, Rear 20 X 8.0 X 10, TURF MASTER WHEEL, 10 X /4 SOLID F237 LUG NUT, 1/2-20 WASHER, SAE, 1/2 WHEEL, CASTER, 11 X SILVER BEAD LO (S/N: & Above) WHEEL ASSEMBLY, 11 X TIRE CMP (SV) Footnotes Champion 2552CE 45

46 Decals Group - Brand & Model NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 276DCL Champion 2552CE 46

47 Decals Group - Brand & Model REF NO PART NO. QTY. DESCRIPTION DECAL, SIMPLICITY LOGO, GV (S/N: & BELOW) DECAL, STRIPE, LH, SIMPLICITY (S/N: & BELOW) DECAL, STRIPE, RH, SIMPLICITY (S/N: & BELOW) DECAL, SIMPLICITY, CHAMPION (CHAMPION MODEL - S/N: & BELOW) DECAL, 3000Z (3000Z MODEL) DECAL, LOGO, CHAMPION (CHAMPION MODEL - S/N: & ABOVE) DECAL, SMI LOGO, 10.47" (S/N: & ABOVE) DECAL, BRAND NAME, CHAMPION HD (CHAMPION HD MODEL) Footnotes Champion 2552CE 47

48 Decals Group - Safety & Common - Domestic NOTE: Unless noted otherwise, use the standard hardware torque specification chart

49 Decals Group - Safety & Common - Domestic REF NO PART NO. QTY. DESCRIPTION YP 1 DECAL, MAIN SAFETY SM 1 DECAL, THROTTLE CONTROL SM 1 DECAL, IGNITION SWITCH YP 1 DECAL, CZT HYRDO RELEASE SM 1 DECAL- BELT & BLADE (Located Under Seat Plate / 44 & 50 Models) SM 1 DECAL-TOUCH UP PAINT ORANGE,BLACK,RED (Located Under Seat Plate) SM 1 DECAL, HEIGHT OF CUT SM 1 DECAL-44"- SILVER ON BLACK W/STRIPE (44" Models) SM 1 DECAL-50"- SILVER ON BLACK W/STRIPE (50" Models & Below) SM 1 DECAL-52"- SILVER ON BLACK W/STRIPE (52" Models) SM 1 DECAL-FREE FLOATING MOWER- SILVER (44" & 50" Models) YP 2 DECAL, DANGER DO NOT OPERATE W/O DEFLECT SM 1 DECAL, HYDRAULIC OIL, SAE 20W50 (Located by the hydraulic tank) YP 1 DECAL, BELT & BLADE, CHAMP, 52 (Located Under Seat Plate / 52" Models) YP 1 DECAL, MOWER WIDTH 50IN/127CM (50" Models & Above) Footnotes 49

50 Decals Group - Safety & Common - Export NOTE: Unless noted otherwise, use the standard hardware torque specification chart Champion 2552CE (3000Z) 50

51 Decals Group - Safety & Common - Export REF NO PART NO. QTY. DESCRIPTION DECAL, THROTTLE CONTROL DECAL, IGNITION SWITCH DECAL, HEIGHT OF CUT * DECAL, US PATENT, ZTR DECAL, HYDRAULIC OIL, SAE 20W DECAL, MAIN SAFETY, ANSI CE DECAL, PARKING BRAKE SYMBOLS DECAL, DANGER, MOWER DECK, ANSI EXP DECAL, FIRE ANSI EXPORT DECAL, DANGER DISCHARGE ANSI EXPORT DECAL, CE DANGER DECAL, BELT & BLADE, CHAMP, DECAL, CZT HYRDO RELEASE DECAL-52"-SILVER ON BLACK W/STRIPE DECAL-FREE FLOATING MOWER- SILVER Footnotes Champion 2552CE (3000Z) 51

52 Evap Canister Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart Champion 2552CE (3000Z) 52

53 Evap Canister Group REF NO PART NO. QTY SM X26SM X11P5S SM SM SM X6SM SM SM SM YP 1 DESCRIPTION CNSTR, CARB, 6 GAL HOSE, VAPOR, 5MM ID, LG HOSE, VAPOR, 5MM ID, LG FITTING, 90 DEG, 3/16X3/16, SANTOPRENE FITTING, STRAIGHT, 3/16X3/16, PLASTIC CLAMP, 3" ID, CUSHIONED, STAINLESS BOLT, 1/4-20 X 3/4, ALLEN BUTTON HD, YZ NUT, 1/4-20 HEX NYLOCK FLANGE ( ) CLAMP, HOSE DECAL, EPA CERT, ZTRS (Located on frame near Serial Tag) HOSE, FORMED, EVAP CANISTER WASHER, 1/4 SAE ( ) DUST FILTER, CANISTER FITTING, STRAIGHT, 10MMX10MM, PLASTIC Footnotes Champion 2552CE (3000Z) 53

54 44" & 50" Mower Deck - Belt & Idler Group - B&S Professional Series NOTE: Unless noted otherwise, use the standard hardware torque specification chart

55 44" & 50" Mower Deck - Belt & Idler Group - B&S Professional Series REF NO PART NO. QTY. DESCRIPTION SM 1 BELT,#7-8060, 151" E.L. (FOR 44" DECK ONLY) SM 1 SPACER,.39 X 1.00 X SM 1 SPACER,.39 X.75 X SM 1 BOLT, 5/16-18 X 1 1/4 FLANGE X22SM 1 BOLT, 3/8-16 X 2-3/4" GD5 YZ SM 3 NUT, 3/8-16 HEX NYLOCK FLANGE X18SM 1 BOLT, 3/8-16 X 2-1/4 GD5 YZ SM 4 WASHER, 3/8 SAE X28SM 1 BOLT, 3/8-16 X 3-1/2 GD5 YZ SM 1 GREASE FITTING, 1/4-28 STRAIGHT SM 2 BUSHING-0.628IDX0.751ODX0.400LG PWDR MTL CSM 1 WELD, DECK IDLER ARM, CONSZ - ORG SM 1 SPACER,.39 X 1.00 X CSM 1 WELD, MOUNT, IDLER, TENSION - ORG (FOR 44" DECK ONLY) SM 3 PULLEY, IDLER SM 1 SPACER-0.39 IDX0.625ODX1.15 LG CASE HARD SM 1 SPRING, EXTENSION, SM 1 NUT, 5/16-18 HEX NYLOCK FLANGE CSM 1 BRACKET, SPRING ANCHOR - ORG SM 1 WASHER,.41 X 1.75 X SM 1 BELT,#7-8055, 155" E.L. (FOR 50" DECK ONLY) CSM 1 WELD, MT, IDLER, TENSION (FOR 50" DECK ONLY) SM 3 SPACER, HYDRO PULLEY Footnotes 55

56 44" & 50" Mower Deck - Belt & Idler Group - Kohler & B&S Vanguard NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 2764PB0 56

57 44" & 50" Mower Deck - Belt & Idler Group - Kohler & B&S Vanguard REF NO PART NO. QTY. DESCRIPTION 1a SM 1 BELT,#7-8060, 151" E.L. (For 44" Deck Only) 1b SM 1 BELT,#7-8055,155" E.L. (For 50" Deck Only) SM 1 SPACER,.39 X 1.00 X SM 1 SPACER,.39 X.75 X SM 1 BOLT, 5/16-18 X 1 1/2" FLANGE X22SM 1 BOLT, 3/8-16 X 2-3/4" GD5 YZ SM 3 NUT, 3/8-16 HEX NYLOCK FLANGE X18SM 1 BOLT, 3/8-16 X 2-1/4" GD5 YZ SM 5 WASHER, 3/8" SAE X28SM 1 BOLT, 3/8-16 X 3-1/2" GD5 YZ SM 1 GREASE FITTING, 1/4-28 STRAIGHT SM 2 BUSHING-0.628IDX CSM 1 IDLER ARM, 44" SIMPLICITY -ORG SM 1 SPACER,.39 X 1.00 X CSM 1 WELD, MOUNT, IDLER, TENSION - ORG SM 3 PULLEY, IDLER SM 1 SPACER-0.39 IDX0.625ODX1.15 LG CASE HARD SM 1 SPRING, EXTENSION, SM 1 NUT, 5/16-18 HEX NYLOCK FLANGE CSM 1 ANCHOR, SPRING SM 1 SPACER,.52 X 1.00 X.44 Footnotes 57

58 44" & 50" Mower Deck - Front Rollers & Baffles NOTE: Unless noted otherwise, use the standard hardware torque specification chart A 58

59 44" & 50" Mower Deck - Front Rollers & Baffles REF NO PART NO. QTY SM CSM CSM ASM X8SM X8SM SM SM SM SM SM X6SM SM ASM ASM ASM 1 DESCRIPTION GAUGE WHEEL BRACKET, GAUGE WHEEL, LH BRACKET, GAUGE WHEEL, RH SHORT BLOWOUT BAFFLE BLACK (44" Models - S/N: All; 50" Models - S/N: & Below) BOLT, 5/16-18 X 1", CARRIAGE CAPSCREW, HEX HEAD,5/16-18 X 1 WASHER, 5/16" SAE NUT, 5/16-18 HEX NYLOCK FLANGE BOLT-WHEEL 3/8-16X THRD YELLOW WASHER-0500(0.51IDX0.87ODX.06THK) BLK NUT, 3/8-16 HEX NYLON FLANGE BOLT, 5/16-18 X 3/4", CARRIAGE NUT, 5/16-18 HEX NYLON LOCK BLOWOUT BAFFLE, RH 50" MOWER - BLACK BLOWOUT BAFFLE, LH 50" MOWER - BLACK BAFFLE FRONT 44, 50 MOWERS (50" Models - S/N: & Above) Footnotes 59

60 44" & 50" Mower Deck - Housing, Arbors & Blades Group - Kohler & B&S Vanguard NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 2764HC0 60

61 44" & 50" Mower Deck - Housing, Arbors & Blades Group - Kohler & B&S Vanguard REF NO PART NO. QTY. DESCRIPTION SM 3 NUT, HEX FLANGE, 9/ SM 6 WASHER, BELLEVILLED, 9/ SM 3 PULLEY SM 3 HUB ASM 3 COVER, ARBOR HOUSING SM 3 BEARING, BALL, 3/4 X 1-3/4 X 5/ SM 3 SPACER, 21/32 X 3/4 X 5/ SM 3 SPACER, 11/16 X 5/32 X 2-11/ SM 3 BEARING, BALL, 11/16 X 1-9/16 X 15/ SM 3 SEAL, FOAM ASM 3 ARBOR HOUSING ASSEMBLY (Includes Ref. No. 12) SM 3 FITTING, GREASE SM 33 SCREW-HEX WSHR HD TAPTT5/16-18X0.750BLK CSM 1 GUARD, BELT - LH - ORG SM 2 BODY CLIP, 5/16-18 X 1/2" DEEP SM 3 WASHER, 9/16, BLACK SM 3 SHAFT, ARBOR SM 3 SHIELD, GRASS, LOWER 19a ASM 3 BLADE, Mower, 16-1/8 (For 44" Deck) 19b ASM 3 BLADE, MOWER, 18-1/8 (For 50" Deck) SM 3 WASHER, HEX, 11/16 X SM 3 WASHER, SPRING, 15/32, BLACK SM 3 BOLT, 7/16-14 X 1-1/4 23a SM 1 DECK SHELL W/DECALS, 44" MOWER (For 44" Deck) 23b SM 1 DECK SHELL W/DECALS, 50" MOWER (For 50" Deck) SM 2 BOLT-RD HD SH SQ NK 1/4-20X G5 BLK SM 1 PLUG,HOLE CSM 1 GUARD, BELT - RH, 44", SMI ORANGE SM 2 NUT-PUSH FOR.250 DIA THREAD.500 OD BLK SM 1 WASHER-0.250(0.26IDX0.84ODX.12THK) BLK SM 1 CLAMP, WIRE,.312DIA. (1).281HOLE BLK SM 1 WASHER (0.34IDX0.75ODX.06THK) BLK SM 1 SPRING, TORSION (S/N: & Below) SM 1 CAP, VINYL SM 2 LOCKWASHER, SPRING.250 BLK SM 2 NUT-HEX 1/4-20 BLK ROD, DEFLECTOR SM 1 DEFLECTOR, BLACK SM 1 SPRING, TORSION, CHUTE, 44/50 (S/N: & Above) Footnotes 61

62 44" & 50" Mower Deck - Housing, Arbors, & Blades Group - B&S Professional Series NOTE: Unless noted otherwise, use the standard hardware torque specification chart

63 44" & 50" Mower Deck - Housing, Arbors, & Blades Group - B&S Professional Series REF NO PART NO. QTY. DESCRIPTION SM 3 NUT, HEX FLANGE, 9/ SM 6 WASHER, BELLEVILLED, 9/ SM 3 PULLEY SM 3 HUB ASM 3 COVER, ARBOR HOUSING SM 3 BEARING, BALL, 3/4 X 1-3/4 X 5/ SM 3 SPACER, 21/32 X 3/4 X 5/ SM 3 SPACER, 11/16 X 5/32 X 2-11/ SM 3 BEARING, BALL, 11/16 X 1-9/16 X 15/ SM 3 SEAL, FOAM ASM 3 ARBOR HOUSING ASSEMBLY (INCLUDES REF. NO. 12) SM 3 FITTING, GREASE SM 33 SCREW-HEX WSHR HD TAPTT5/16-18X0.750BLK CSM 1 GUARD, BELT - LH - ORG SM 2 BODY CLIP, 5/16-18 X 1/2" DEEP SM 3 WASHER, 9/16, BLACK SM 3 SHAFT, ARBOR SM 3 SHIELD, GRASS, LOWER ASM 3 BLADE, Mower, 16-1/8 (44" Models) SM 3 WASHER, HEX, 11/16 X SM 3 WASHER, SPRING, 15/32, BLACK SM 3 BOLT, 7/16-14 X 1-1/ DECK SHELL W/ DECALS (44" Models) SM 1 BOLT-RD HD SH SQ NK 1/4-20X G5 BLK SM 1 PLUG,HOLE CSM 1 GUARD, BELT - RH, 44", SMI ORANGE SM 2 NUT-PUSH FOR.250 DIA THREAD.500 OD BLK SM 1 WASHER-0.250(0.26IDX0.84ODX.12THK) BLK SM 1 CLAMP, WIRE,.312DIA. (1).281HOLE BLK SM 1 WASHER (0.34IDX0.75ODX.06THK) BLK SM 1 SPRING, TORSION, CHUTE, 44/ SM 1 CAP, VINYL SM 2 LOCKWASHER, SPRING.250 BLK SM 2 NUT-HEX 1/4-20 BLK ROD, DEFLECTOR SM 1 DEFLECTOR, BLACK SM 1 SPACER-0.328IDX0.499ODX0.625LG PM X14SM 1 BOLT, CARRIAGE, 1/4-20 X 1.25, GD5,BLACK DECK SHELL W/ DECALS (50" Models) CSM 1 GUARD, BELT, RH (50" Models) ASM 3 BLADE, MOWER, 18-1/8 (50" Models) DECK SHELL W/ DECALS (50" Export Models) A 1 BAFFLE - FRONT 44/50 - BLACK X6SM 4 BOLT, 5/16-18 X 3/4 CARRIAGE Footnotes 63

64 44" & 50" Mower Deck - Housing, Arbors, & Blades Group - B&S Professional Series NOTE: Unless noted otherwise, use the standard hardware torque specification chart

65 44" & 50" Mower Deck - Housing, Arbors, & Blades Group - B&S Professional Series REF NO PART NO. QTY. DESCRIPTION SM 4 NUT, 5/16-18 HEX NYLOCK FLANGE Footnotes 65

66 44" Mower Deck - Rear Roller & Linkage NOTE: Unless noted otherwise, use the standard hardware torque specification chart A 66

67 44" Mower Deck - Rear Roller & Linkage REF NO PART NO. QTY. DESCRIPTION CSM 1 WELD,SHAFT,ROLLER, SM 2 NUT-HEX ADJUSTING.990DIA.687TH PM YEL SM 4 NUT, HEX TOP LOCK SPIRAL FLNG, 3/8-16 YEL SM 2 SLIDE.803 X SM 2 WASHER-0500(0.53IDX1.25X.08THK)BLK SM 2 BOLT, SHLDR, 3/ LG.50SH G5 BLK SM 8 WASHER-0.625(0.66IDX1.12X.11THK) BLK SM 8 SPACER-0.666ID 0.067WL 0.81 LG SPLIT BLK SM 2 ROLLER,ROUNDED SM 2 NUT-PUSH FOR.625 DIA STUD CAPPED BLK SM 7 ROLLER CSM 1 BAR, ROLLER SM 2 BOLT-RD HD SH SQ NK 3/8-16X1.500 G5 BLK SM 6 CAPSCREW, HEX HEAD TAPTITE, 5/16-18 X 3/ SM 3 STRAP-1.00WD 3.06LG.134THK ROLLER ECOAT CSM 1 WELD,SHAFT,DECK LIFT, SM 1 ROD, DECK LIFT LINKAGE SM 1 BUSHING, DECK SUPPORT SM 1 CLEVIS, 1/2-20, STEEL X12SM 1 PIN, CLEVIS, 1/2 X 1 1/2, YZP SM 2 PIN, HAIR,.0915 X 1-7/ SM 1 NUT, 1/2-20 HEX JAM Footnotes 67

68 44", 50" & 52" Mower Deck - Deck Hangers & Puller Bars NOTE: Unless noted otherwise, use the standard hardware torque specification chart B Champion 2552CE 68

69 44", 50" & 52" Mower Deck - Deck Hangers & Puller Bars REF NO PART NO. QTY. DESCRIPTION SM 2 EYE BOLT, 3/8-16 X 5, 1 EYE SM 2 BUSHING, REAR QUICK TACH, CZ SM 4 SPACER,.53 X 1.00 X 1.44, CZ SM 2 ADJUSTER, BRAKE LINKAGE SM 2 SPACER-0.390ID 0.90 OD 0.70LG P'MTL SM 2 EYE BOLT, 3/8-16 X 6, 3.0 THREAD YP 4 PIN, HAIR,.0915 X 1-7/ SM 3 CLEVIS, 1/2-20, STEEL, CLEAR ZINC X12SM 3 PIN, CLEVIS, 1/2 X 1 1/2, YZP SM 2 NUT, 3/8-16 HEX NYLON LOCK SM 4 NUT, 1/2-20 HEX NYLON LOCK X18SM 2 BOLT, 1/2-20 X 2-1/4 GD8 YZ SM 10 NUT, 3/8-16 HEX NYLOCK FLANGE SM 4 WASHER,.41 X 1.75 X SM 2 WASHER, 5/16 LOCK YZ SM 3 NUT, 1/2-20 HEX JAM X14SM 4 BOLT, 3/8-16 X 1-3/4 GD X10SM 2 BOLT, 3/8-16 X 1-1/4 GD SM 4 WASHER, 3/8 SAE X8SM 4 BOLT, 3/8-16 X 1 GD5 YZ SM 2 ROD, DECK LIFT LINKAGE SM 3 BUSHING, DECK SUPPORT X8SM 4 BOLT, 5/16-18 X 1 GD5 YZ SM 1 SHAFT, HANGER SM 1 SHAFT, HANDLE, DECK MOUNT CSM 1 WELD, DECK HANGER, LH - ORG CSM 1 WELD, DECK HANGER, RH - ORG CSM 1 PLATE, DECK HANGER SUPPORT - ORG SM 4 SPACER,.39 X 1.00 X SM 1 SAFETY WALK, 4.50 X 3.50 Footnotes Champion 2552CE 69

70 50" Mower Deck - Rear Roller & Linkage NOTE: Unless noted otherwise, use the standard hardware torque specification chart B 70

71 50" Mower Deck - Rear Roller & Linkage REF NO PART NO. QTY. DESCRIPTION CSM 1 WELD,SHAFT,ROLLER, SM 2 NUT-HEX ADJUSTING.990DIA.687TH PM YEL SM 4 NUT, HEX TOP LOCK SPIRAL K FLNG, 3/8-16 YEL SM 2 SLIDE.803 X SM 2 WASHER-0500(0.53IDX1.25X.08THK)BLK SM 2 BOLT, SHLDR, 3/ LG.50SH G5 BLK SM 15 WASHER-0.625(0.66IDX1.12X.11THK) BLK SM 4 SPACER,.876 OD X.666 ID X 1.25 LG SM 2 ROLLER, ROUNDED SM 2 NUT-PUSH FOR.625 DIA STUD CAPPED BLK SM 8 ROLLER CSM 1 BAR, ROLLER SM 2 BOLT-RD HD SH SQ NK 3/8-16X1.500 G5 BLK SM 33 SCREW-HEX WSHR HD TAPTT5/16-18X0.750BLK SM 3 STRAP-1.00WD 3.06LG.134THK ROLLER ECOAT CSM 1 WELD, SHAFT, DECK LIFT, 50" ORANGE SM 1 ROD, DECK LIFT LINKAGE SM 1 BUSHING, DECK SUPPORT SM 1 CLEVIS, 1/2-20, STEEL X12SM 1 PIN, CLEVIS, 1/2 X 1 1/2, YZP SM 2 PIN, HAIR,.0915 X 1-7/ SM 1 NUT, 1/2-20 HEX JAM Footnotes 71

72 52" Mower Deck - Belts & Idler Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart Champion 2552CE (3000Z) 72

73 52" Mower Deck - Belts & Idler Group REF NO PART NO. QTY. DESCRIPTION SM 1 BELT, A-SEC, EL, LG ARAMID, WRAP SM 1 WASHER, 3/8 USS SM 1 SPACER,.39 X.75 X SM 1 SCREW-HEX WSHR HD TAPTT5/16-18X1.000BLK X22SM 1 BOLT, 3/8-16 X 2-3/4 GD5 YZ SM 3 NUT, 3/8-16 HEX NYLOCK FLANGE X16SM 1 BOLT, 3/8-16 X 2 GD5 YZ SM 1 WASHER, 3/8 SAE X32SM 1 BOLT, 3/8-16 X 4 GD5 YZ SM 1 GREASE FITTING, 1/4-28 STRAIGHT SM 2 BUSHING-0.628IDX0.751ODX0.400LG PWDR MTL CSM 1 WELD, DECK, IDLER ARM - ORG SM 1 SPACER,.39 X 1.00 X CSM 1 WELD, MOUNT, IDLER TENSION - ORG (S/N: & Below) SM 3 PULLEY, IDLER, 4.06OD,.669ID,.75W STL SM 1 SPACER-0.39 IDX0.625ODX1.15 LG CASE HARD SM 1 SPRING, EXTENSION, SM 1 NUT-HEX FLANGE 5/16-18, WHIZ LK SM, YZ CSM 1 BRACKET, SPRING ANCHOR - ORANGE SM 1 SPACER,.39 X 1.75 X.63, YZ SM 3 SPACER, HYDRO PULLEY SM 1 WASHER, 5/16 USS CYP 1 WELD, MOUNT, IDLER TENSION ORG (S/N: & Above) Footnotes Champion 2552CE (3000Z) 73

74 52" Mower Deck - Housing, Covers, Spindles & Blades Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart Champion 2552CE (3000Z) 74

75 52" Mower Deck - Housing, Covers, Spindles & Blades Group REF NO PART NO. QTY. DESCRIPTION DECK SHELL W/ DECALS, 52, SMI CHAMP SM 3 HOUSING, SPINDLE, CAST STEEL, MACHINED SM 6 BEARING-BALL 20MM 46" MWR SM 3 SHAFT-SPINDLE 20MM DIA MM LG SM 6 SHIELD-ARBOR 2.050OD 46" MWR SM 6 SPACER-BEARING PWDR MTL 46" MWR SM 6 RING-SELF LOCKING 46" MWR SM 10 SCREW-HEX WSHR HD TAPTT5/16-18X1.000BLK SM 3 BLADE-MOWER 18.50LG 52" MWR SM 3 WASHER, SPRING 0.475IDX1.75ODX.156TH BLK SM 6 CAPSCREW-HEX HD 7/16-14X1.000 G5 BLK SM 3 PULLEY-5.5 OD 11GA SPLIT 52" MWR SM 3 SPACER-LOWER DRIVE 46" MWR SM 3 LOCKWSHER-SPRING.438 BLK SM 1 DEFLECTOR-DISCH PLASTIC 46/52 DECKS (CE Models - S/N: & Below) ASM 1 HINGE, DEFLECTOR, 52" (CE Models - S/N: & Below) SM 2 BOLT-RD HD SH SQ NK 5/16-18X0.750 G5 BLK SM 4 NUT, 5/16-18 HEX SERRATED FLANGE (SMALL) SM 1 SPRING-TORS DEFLECTOR 2.16LG 46" MWR (CE Models - S/N: & Below) ASM 1 PLATE, DEFLECTOR CLOSEOFF (CE Models - S/N: & Below) SM 1 ROD, DEFLECTOR, YELLOW ZINC (CE Models - S/N: & Below) SM 2 NUT, PUSH, 5/16 BZ SM 8 SCREW-HEX WSHR HD TAPTT5/16-18X0.750BLK SM 2 SCREW-HEX WSHR HD TAPTT5/16-18X1.500 BLK AYP 1 BRKT, BELT COVER, SHORT AYP 1 BRKT, BELT COVER, LONG W/ TAB (DOMESTIC MODELS ONLY) SM 1 COVER-BELT BLACK POLY RH " MWRS (DOMESTIC MODELS ONLY) SM 1 COVER-BELT LH BLACK POLY 52" MOWER (DOMESTIC MODELS ONLY) ASM 1 BAFFLE, PINCHOFF SM 1 ADAPTER-WASHOUT PORT 46+52" PLASTIC YP 1 WASHOUT PORT-CONNECTOR 46+52" BLK POLY CSM 1 PLATE, BELT GUARD (CE MODELS ONLY) CSM 1 PLATE, DECK GUARD - ORG RH (CE MODELS ONLY) CSM 1 PLATE, DECK GUARD - ORG LH (CE MODELS ONLY) X8SM 8 BOLT, 5/16-18 X 1 GD5 YZ (CE MODELS ONLY) SM 8 WASHER, 5/16 SAE (CE MODELS ONLY) SM 8 NUT, 5/16-18 HEX NYLOCK FLANGE (CE MODELS ONLY) ASM 4 BRKT, BELT COVER, FRONT (CE MODELS ONLY) YP 1 DEFLECTOR, 46/52 (CE Models - S/N: & Above) SM 1 CAP, PROTECTOR,.120 ID (CE Models - S/N: & Above) AYP 1 BRACKET, HINGE, RETRO (CE Models - S/N: & Above) YP 1 SPRING - TORSION (CE Models - S/N: & Above) YP 1 ROD, DEFLECTOR 46"/52" (CE Models - S/N: & Above) AYP 1 BRACKET, SUPPORT, DEFLECTOR (CE Models - S/N: & Above) Footnotes Champion 2552CE (3000Z) 75