ELECTRIC CLUTCH HYDRO DRIVE RMO TRACTORS LT-200 SERIES

Transcription

1 Parts Manual for RMO TRACTORS LT-200 SERIES Model No. Description ELT ELT ELT ELT LT LT LT LT LT LT LT LT22500 Briggs & Stratton Yard Power Products Group 535 Macon Road McDonough, GA, U.S.A Revision: C 3/20/2012

2 Table Of Contents PAGE GROUP 4 Wheels & Tires Group 6 Wheels & Tires Group 8 Hood, Grille & Dash Group 10 Seat Deck & Fuel Tank Group 12 Steering Group 14 Frame & Front Axle Group 18 Engine & Electric Clutch Group, 38" & 42" 20 Engine & Electric Clutch Group, 44" & 50" 22 Engine Group - 18HP, 20HP & 22HP Briggs & Stratton 26 Controls Group 28 Transmission Group 30 Transmission SERVICE PARTS - Tuff Torq K46BL 34 Lift Group - Manual 36 38" Mower Deck - Housing, Arbors & Blades Group 38 38" & 42" Mower Deck - Housing, Arbors & Blades Group 40 38" & 42" Mower Deck - Housing, Arbors & Blades Group 42 38" & 42" Mower Deck - Belt, Idler Arm & Hitch Group 44 38" & 42" Mower Deck - Height Adjustment & Roller Bar Group 46 40" Mower Deck - Housing, Arbors & Blades 50 40" Mower Deck - Belt, Idler Arm & Hitch 52 40" Mower Deck - Height Adjustment & Roller Bar 54 44" Mower Deck - Housing, Arbors & Blades Group 56 44" & 50" Mower Deck - Belt, Idler Arm & Hitch Group 58 44" & 50" Mower Deck - Height Adjustment & Roller Bar Group 60 50" Mower Deck - Housing, Arbors & Blades Group 62 50" Mower Deck - Housing, Arbors & Blades Group 64 Decals Group 66 Decals Group 68 Electrical Group 72 Wiring Schematic ( ) LT-200 SERIES 3 TP C-TC-N

3 Wheels & Tires Group 4 LT-200 SERIES

4 Wheels & Tires Group Item Part No Qty Description WHEEL & TIRE ASSEMBLY, Front TIRE, Turf 15 X Saver TL TUBE, Tire, Front WHEEL & BUSHINGS ASSEMBLY, Front BEARING FITTING, Grease, 1/4-28 Thread VALVE STEM & CAP WASHER, 3/ WASHER, Special Yellow RING, Retaining CAP, Hub KEY, 3/16 x 3/16 x WASHER SPACER, 0.77 ID x 1-1/4 OD x 1.65 LG Powdered Metal Black WHEEL & TIRE ASSEMBLY, Rear 20x WHEEL & TIRE ASSEMBLY, Rear 22x TIRE, Turf 20 X Saver TL TIRE, Turf 22 X Saver TL TUBE, Tire, Rear, 20 X TUBE, Tire, Rear, 22 X WHEEL, Hub Footnotes: LT-200 SERIES 5

5 Wheels & Tires Group 6 LT-200 SERIES

6 Wheels & Tires Group Item Part No Qty Description WHEEL & TIRE ASSEMBLY, Front TIRE, Turf 15 X Saver TL TUBE, Tire, Front WHEEL & BUSHINGS ASSEMBLY, Front BEARING FITTING, Grease, 1/4-28 Thread VALVE STEM & CAP WASHER, 3/ WASHER, Flat, 3/4 x 1-1/4 (Model & Only) WASHER, Special Yellow RING, Retaining RING, Retaining, 3/4 (Model & Only) CAP, Hub CAP, Hub (Model & Only) KEY, 3/16 x 3/16 x KEY, 3/16 x 3/16 x 2 (Model & Only) WASHER SPACER, 0.77 ID x 1-1/4 OD x 1.65 LG Powdered Metal Black WHEEL & TIRE ASSEMBLY, Rear 20" WHEEL & TIRE ASSEMBLY, Rear 22" TIRE, Turf 20 X Saver TL TIRE, Turf 22 X Saver TL TUBE, Tire, Rear, 22 X TUBE, Tire, Rear, 22 X WHEEL, Hub WASHER, 3/4 x 1-7/8 (Model & Only) Footnotes: LT-200 SERIES 7

7 Hood, Grille & Dash Group 8 LT-200 SERIES

8 Hood, Grille & Dash Group Item Part No Qty Description D 1 HOOD, W/Scoop CAPSCREW, Whizlock, 1/4-20 x 5/ DUCT, Air Inlet Plastic (Was ) SCREW, Pan Head #10-24 x 1/ PUSH NUT KNOB, Cruise Lock Green Plastic COVER, Steering Shaft Plastic CAPSCREW, Hex Head, Taptite, 5/16-18 x 3/ WASHER, Plain, 5/ KNOB, Brake Lock Plastic DASHBOARD GUIDE, Hood RH WASHER RIVET, Pop, Stem Black GUIDE, Hood LH NUT, Hex Flange Whiz, 1/ D 1 PANEL, Hood, LH Side ROD, Dash Support SCREW, Taptite, 1/4-20 x 1/ NUT, Hex, Nylon, Lock, # A 1 HINGE, Hood LH A 1 HINGE, Hood RH D 1 GRILLE D 1 PANEL, Hood, RH Side INSERT, Lightbar HEADLIGHT ASSEMBLY POSITIONER, Hood Footnotes: LT-200 SERIES 9

9 Seat Deck & Fuel Tank Group 10 LT-200 SERIES

10 Item Part No Qty Description SEAT, Low Back (Used on only) SEAT, Hi Back, Steel Pan WASHER, Plain, 5/ LATCH, Seat 20GA E-Coat CAPSCREW, Hex Head Flange Dog Point, 5/16-18 x SPACER, Powdered Metal Yellow A 1 SUPPORT, Seat 12GA BOLT, Carriage, 5/16-18 x 3/ A 1 PIVOT, Seat 10GA BOLT, Carriage, 5/16-18 x 3/ NUT, Hex Flange, 5/16-18 ESNA BOLT, Shoulder 5/16-18 G SPRING, Compression WASHER, Spring Black COVER, Spring POD, LH Cup Holder ELBOW FITTING BUSHING TANK, Fuel CAP, Gas PAD, Footrest LH NUT, Hex, Flange Whizlock, 5/ PAD, Footrest RH D 1 DECK, Seat w/footrests (Red) SCREW, Hex, Washer Head, Plastite, 1/4-20 x 1/ SCREW, Taptite, 5/16-18 x 5/ POD, RH Lift Quadrant A 1 SUPPORT, Seat Deck Seat Deck & Fuel Tank Group Footnotes: LT-200 SERIES 11

11 Steering Group 12 LT-200 SERIES

12 Steering Group Item Part No Qty Description CAP, Steering Wheel, Plain NUT, Hex Lock, ESNA Light, 5/8-18, Thin WASHER, 5/ STEERING WHEEL, w/aluminum Insert RING, Klipring Extension WASHER BUSHING, Steering SHAFT, Steering Gear & Spline Yellow A 1 TOWER (Was A) CAPSCREW, Hex Washer Head, Taptite, 5/6-18 x 5/8 Footnotes: LT-200 SERIES 13

13 Frame & Front Axle Group 14 LT-200 SERIES

14 Frame & Front Axle Group Item Part No Qty Description CAP, Hub, 1.48 ID x.62 Long RING, Klipring, 3/4 Dia WASHER, 3/4 x 1-5/8 OD x 1/16 Thick AXLE, Front FITTING, Lube,.250 Drive,.25 Shank Ball Chk Yel BUSHING, Axle Pivot HOOK, Mower, Hitch CAPSCREW, Hex, Whiz Lock, 7/16-14 x 1-1/ PLATE, Axle Support NUT, Hex Flange, Two Way, 5/ NUT, Hex Flange, Whiz Lock, 5/ CAPSCREW, Hex Head, 3/8-16 x 1-1/4, G BUSHING, 3/8 ID x 5/8 OD x 9/16 Long A 1 TIE ROD, Flat (Early Version) TIE ROD, Flat (Late Version) SM 2 WASHER, 5/8 (Late Version) A 1 WHEEL SPINDLE ASSEMBLY, R.H NUT, Hex Flange, Two Way, Locking, 3/ WHEEL SPINDLE ASSEMBLY, L.H. (Early Version) WHEEL SPINDLE ASSEMBLY, L.H. (Late Version) A 1 FRAME (Was ) SUPPORT, Front Footrest, R.H A 1 SUPPORT, Rear Frame (Was or ) CAPSCREW, Hex Washer Head, Taptite, 5/16-18 x 5/ CAPSCREW, Hex, Whiz Lock, 5/16-18 x 3/ SUPPORT, Front Footrest, L.H. (Was ) WASHER, 5/8 x 1-3/4 OD CAPSCREW, Hex Head, 5/8-11 x 3-1/4, G LINK, Drag (with Ball Joint), 3/8 (Early Version) LINK, Drag (with Bearing), 5/16 (Late Version) NUT, Hex, Nylock, 3/8-24 (Early Version) PEDAL ASSEMBLY, Brake A 1 LATCH, Brake Lock BOLT, Shoulder, 5/16-18 x 15/32, G SPACER, Pivot, 11/32 ID 1-3/4 OD PEDAL ASSEMBLY, Forward A 1 PEDAL, Reverse BOLT, Carriage, 5/16-18 x 1-1/4, G SPACER, Foot Pedal ACTUATOR, RMO Switch BRACKET, Pedal Pivot PLATE, Bearing SUPPORT, Battery LIFT SHAFT ASSEMBLY Footnotes: LT-200 SERIES 15

15 Frame & Front Axle Group 16 LT-200 SERIES

16 Item Part No Qty Description BRACKET, Sector Support GEAR, Steering (Early Version) GEAR, Steering, 26 Teeth (Late Version) SPACER, Sector Gear, 3/8 ID x 1-1/4 OD CAPSCREW, Hex, Whiz Lock, 3/8-16 x NUT, Hex Flange, Two-Way Lock, 3/8-16 (Was ) SUPPORT, Transmission CAPSCREW, Hex Head, 5/16-18 x 1-1/4 (Late Version) WASHER, 5/16 Flat (.341 I.D. x.87 O.D. X.06 Thick) Black (Late Version) NUT, Hex Flange Two-Way Lock, 5/16-18 (Late Version) Frame & Front Axle Group Footnotes: LT-200 SERIES 17

17 Engine & Electric Clutch Group, 38" & 42" 18 LT-200 SERIES

18 Engine & Electric Clutch Group, 38" & 42" Item Part No Qty Description VALVE, Oil Drain 2 31P B1 1 ** ENGINE, 18HP B&S Intek 1 Cylinder, Model 31P B B1 1 ** ENGINE, 20HP B&S Intek Twin, Model B EDGING, Rubber, Short (B&S V-Twin) EDGING, Rubber, Long (B&S Single Only) CONTROL, Throttle Double 20.5, 23.5 B&S Single CONTROL, Throttle Double 34.7, 36 B&S Twin CLAMP, Hose Type E HOSE, Fuel, 45-1/2 Long (B&S V-Twin) HOSE, Fuel 55 Long (B&S Single Only) CLIP, Hose, Plastic, Push-In A 1 SHIELD, Heat SCREW, Taptite, 5/16-18 x 5/ KEY, Hi-Pro, 1/4 x 2-1/ PULLEY TIE, Self Locking 7-5/ CLUTCH ASSEMBLY, Long OGURA WASHER CAPSCREW, 7/16-20 x 3-1/2, Hex Head LOCKWASHER, 7/ (1) SCREW, Hex, Washer Head, Taptite, 3/8-16 x 1-1/ CAPSCREW, Hex Head, Taptite, 3/8-16 x 1-1/2 (B&S Single Only) WASHER, 3/ RETAINER, Clutch, Yellow LOCKWASHER, External Tooth, 3/ A 1 SHIELD, Heat B&S Twin 20GA SCREW, Taptite, 1/4-20 x 1/ PIPE, Exhaust w/flange LH B&S INT PIPE, Exhaust w/flange RH B&S INT (1) GASKET, Exhaust B&S (2) LOCKWASHER, 5/ (2) CAPSCREW, Socket Head, 5/16-18 x 3/ A 1 BRACKET, Muffler Mount 12GA MUFFLER, B&S Twin CLIP, Wire A 1 SHIELD, Heat Single Cycle 20GA MUFFLER, B&S Single PIPE, Exhaust w/flange B&S 1 Cycle Footnotes: Note** See your local Briggs & Stratton distributor for parts and service. LT-200 SERIES 19

19 Engine & Electric Clutch Group, 44" & 50" 20 LT-200 SERIES

20 Engine & Electric Clutch Group, 44" & 50" Item Part No Qty Description VALVE, Oil Drain 2 SV540S-18 PS-S 1 * ENGINE, 18HP Kohler Single Courage Pro, Model SV540S-18 Spec #PS-SV B1 1 ** ENGINE, 20HP B&S Intek Twin, Model B B1 1 ** ENGINE, 22HP B&S Intek Twin, Model B B1 1 ** ENGINE, 24HP B&S Intek Twin, Model B EDGING, Rubber, Short (B&S V-Twin & Kohler Single) CONTROL, Throttle Double 19 Long (Kohler Single) CONTROL, Throttle Double 34.7 Long (B&S Twin) CLAMP, Hose Type E HOSE, Fuel, 45-1/2 Long (B&S V-Twin & Kohler Single) HOSE, Fuel 55 Long (B&S Single Only) CLIP, Hose, Plastic, Push-In A 1 SHIELD, Heat SCREW, Taptite, 5/16-18 x 5/ KEY, Square, 1/4 x 1/4 x 29/32 Hard PULLEY SPACER, 1.01 ID x 1.68 OD x 3/8 LG Powdered Metal Yellow TIE, Self Locking 7-5/ CLUTCH ASSEMBLY, Mid-Range OGURA WASHER CAPSCREW, 7/16-20 x LOCKWASHER, 7/ (1) SCREW, Hex, Washer Head, Taptite, 3/8-16 x 1-1/ WASHER, 3/ RETAINER, Clutch, Black LOCKWASHER, External Tooth, 3/ A 1 SHIELD, Heat B&S Twin 20GA SCREW, Taptite, 1/4-20 x 1/ PIPE, Exhaust w/flange LH B&S INT PIPE, Exhaust w/flange RH B&S INT (1) GASKET, Exhaust B&S (2) LOCKWASHER, 5/ (2) CAPSCREW, Socket Head, 5/16-18 x 3/ A 1 BRACKET, Muffler Mount 12GA MUFFLER, B&S Twin CLIP, Wire A 1 SHIELD, Heat Single Cycle 20GA MUFFLER, B&S Single PIPE, Exhaust w/flange Kohler Footnotes: Note* See your local Kohler distributor for parts & service. Note** See your local Briggs & Stratton distributor for parts and service. LT-200 SERIES 21

21 Engine Group - 18HP, 20HP & 22HP Briggs & Stratton 22 LT-200 SERIES

22 Engine Group - 18HP, 20HP & 22HP Briggs & Stratton Item Part No Qty Description 1 31Q B1 1 * ENGINE, 18.5HP Briggs & Stratton Single Intek: 31Q B1 1 31P B1 1 * ENGINE, 18.5HP Briggs & Stratton Single Intek: 31P B1 (Used on Models , , & ) 1 40G E1 1 * ENGINE, 20HP Briggs & Stratton Twin Intek: 40G E1 (Used on Models , , & ) 1 44K E1 1 * ENGINE, 22HP Briggs & Stratton Twin Intek: 44K E1 (Used on Model ) B1 1 * ENGINE, 22HP Briggs & Stratton Twin Intek: B1 (Used on Models & ) B1 1 * ENGINE, 22HP Briggs & Stratton Twin Intek: B1 (Used on Model ) B1 1 * ENGINE, 22HP Briggs & Stratton Twin Intek: B1 (Used on Model ) VALVE, Shut Off Oil Drain SEAL, Short SEAL, Long (B&S Single) A 1 SHIELD, Heat SCREW, Hex Washer Head Taptite 5/16-18 x 5/ A 1 SHIELD, Heat (B&S Twin) MUFFLER (B&S Twin) A 1 BRACKET, Muffler Mount PIPE, Exhaust R.H. (B&S Twin) PIPE, Exhaust L.H. (B&S Twin) A 1 SHIELD, Heat MUFFLER PIPE, Exhaust (B&S Single) SCREW, Hex Washer Head Taptite 1/4-20 x 1/ CLIP, Speed Wire CONTROL, Throttle Double (B&S Single) CONTROL, Throttle Double (B&S Twin) CONTROL, Throttle, Choke-A-Matic (Models , & only) CLAMP, Hose HOSE, Fuel CLIP, Hose SCREW, Hex Washer Head Taptite 3/8-16 x 1 (B&S Single) LOCKWASHER, External Tooth 3/ WASHER, 3/ PULLEY & HUB ASSEMBLY, Engine TIE, Self Locking RETAINER, Clutch CLUTCH, Electric OGURA WASHER, Hex LOCKWASHER, Spring CAPSCREW, Hex Head 7/16-20 x 3-1/2 G GASKET, Exhaust SCREW, Hex Washer Head Taptite 3/8-16 x 1-1/4 (Qty. 1 used on 18.5HP) CAPSCREW, Hex Socket Head 5/16-18 x 3/4 G LOCKWASHER, Spring 5/ A 1 SUPPORT, Muffler, Hood Footnotes: Note* To verify your specific engine model, please reference the ID Tag located on your engine. See your local Briggs & Stratton distributor for parts and service. LT-200 SERIES 23

23 Engine Group - 18HP, 20HP & 22HP Briggs & Stratton 24 LT-200 SERIES

24 Item Part No Qty Description PIVOT, Hood BOLT, Carriage, 5/16-18 x NUT, Hex Flange Whizlock, 5/16-18 Engine Group - 18HP, 20HP & 22HP Briggs & Stratton Footnotes: Note* To verify your specific engine model, please reference the ID Tag located on your engine. See your local Briggs & Stratton distributor for parts and service. LT-200 SERIES 25

25 Controls Group 26 LT-200 SERIES

26 Controls Group Item Part No Qty Description PAD, Foot Pedal Reverse SPACER, Pivot Powdered Metal NUT, Hex, Flange Whiz Lock, 5/ ROD, Cruise Latch, 16.97LG CLIP, Linkage, Black ROD, Parking Brake, LG Yellow BOLT, Carriage, 3/8-16 x 1-1/ A 1 BRACKET, Idler 7GA SPRING, Extension LG Black PULLEY, 3 OD Plastic NUT, Hex Flange, 3/8-16 ESNA BOLT, Carriage, 5/16-18 x PULLEY, Idler SPRING, Extension PIN, Cotter 3/32 x 3/ ROD, Brake, 15.1 LG SPRING, Extension LG Black PEDAL, Brake Rubber PIN, Quick ROD, Brake Return, LG ROD, Cruise Latch, 2.83 LG SPRING, Tension, Clutch LATCH, Cruise Powdered Metal BOLT, Shoulder 5/16-18 G PAD, Foot Pedal Forward Footnotes: LT-200 SERIES 27

27 Transmission Group 28 LT-200 SERIES

28 Transmission Group Item Part No Qty Description CAPSCREW, Hex Head, Taptite, 5/16-18 x 3/ ROD, Bypass, LG PIN, Quick NUT, Hex Flange, ESNA, 5/ TRANSMISSION ASSEMBLY, K46BP TRANSMISSION ASSEMBLY, K46BL (Used with 22" Tire Models) SCREW, Hex Head Flange Lock, 5/16-18 x 2-1/ NUT, Hex Flange, ESNA, 5/ SPACER V-BELT, Drive Belt, Aramid/Kevlar 89.25" EL HA A 1 ARM, Control WASHER, Flat, 5/ CAPSCREW, Hex Head, 5/16-18 x A 1 STRAP, Torque WASHER, Plain, 5/ CAPSCREW, Hex Head, 5/16-18 x 1-3/ NUT, Hex, Flange Whizlock, 5/16-18 Footnotes: LT-200 SERIES 29

29 Transmission SERVICE PARTS - Tuff Torq K46BL 30 LT-200 SERIES

30 Item Part No Qty Description * TRANSMISSION, Tuff Torq K46BL KIT, Upper Case LOWER CASE VENT VALVE MAGNET *MAGNET HOLDER *KIT, Pump Shaft/Bearing *SPRING BYPASS SHAFT A LEVER, Bypass RING, Snap, SEALING CAP RING, Snap, C SEAL WASHER KIT, Drain Bolt RING, 1A P10A SEAL TC *SCREW, Tapping, 8 * SCREW, Tapping, 8 * *CENTER CASE K W/ 1.2 FILTER IDS KIT PIN 3 * FILTER BOLT, 10 * *IDS VALVE *IDS SPRING *IDS FILTER *KIT, Cylinder Block (Pump) *SPRING PUMP SHAFT E-RING BEARING, 6202C MOTOR HOUSING *THRUST BEARING KIT, Cylinder Block WASHER, 12 * 24 * MOTOR SHAFT RING, Snap, S BRAKE DISC/MOTOR GEAR (10T) *BEARING, 6202 RSR C THRUST METAL *SWASH PLATE CMP THRUST BEARING K *CONTROL SHAFT *FULCRUM Transmission SERVICE PARTS - Tuff Torq K46BL Footnotes: *Note: See your local authorized dealership for Tuff Torq parts and warranty or contact Tuff Torq at (U.S ; Int'l ) LT-200 SERIES 31

31 Transmission SERVICE PARTS - Tuff Torq K46BL 32 LT-200 SERIES

32 Item Part No Qty Description *SPRING, Torsion *CONTROL ARM A CONTROL LEVER C *JERKY PLATE WASHER, COTTER PIN, 1/8 * 3/ SPRING PIN 6 * ROLL PIN 6 * O-RING 1A P NUT *KIT, Diff Gear *FINAL GEAR (54T) *FINAL PINION COLLAR *REDUCTION SHAFT WASHER, 12 * 32 * REDUCTION GEAR (38T) *FINAL PINION GEAR (10T) AXLE SHAFT, Left AXLE SHAFT, Right THRUST WASHER RING SEAL 19 * 32 * BUSHING, 19 * *BUSHING, BRAKE SHOE BRAKE LEVER *BRAKE SHAFT *SPRING, Brake Return BRAKE ACTUATOR SPRING PIN 5 * O-RING 1A P SPRING PIN 4 * PULLEY D FAN, White WASHER, Wave RING, Snap *SPRING PIN 3.0A * OIL SEAL 16 * 22 * *SPRING PIN 3.0A * *SEALANT K46 & T40 SEAL KIT (ALL MODELS) *REPAIR KIT K46 Transmission SERVICE PARTS - Tuff Torq K46BL Footnotes: *Note: See your local authorized dealership for Tuff Torq parts and warranty or contact Tuff Torq at (U.S ; Int'l ) LT-200 SERIES 33

33 Lift Group - Manual 34 LT-200 SERIES

34 Item Part No Qty Description DECAL, Height Of Cut BOLT, Carriage, 1/4-20 x 5/8 G A 1 QUADRANT, Lift Height NUT, Hex Flange Whiz, 1/ GRIP ROD, Lift Handle E-Coat, 17.7 LG CAPSCREW, Hex Head, 5/16-18 x WASHER, Plain, 21/64 x 1-1/ SPRING, Torsion, 2.12 LG Black A 1 CLEVIS, Lift SPACER, Pivot Powdered Metal NUT, Hex, Flange Whizlock, 5/ A 1 PLATE, Bearing SCREW, Taptite, 5/16-18 x 5/ CLIP, Spring WASHER, 1/ PIN, Threaded Shoulder A 2 ARM, Lift Rear 10GA NUT, Hex, Flange, Whizlock, 5/16-18 x 1/ DECAL, CAUTION! Pinch Point BOLT, Shoulder NUT, Hex Flange, ESNA, 3/ SPACER (Used on 38" & 42" Mower Decks) SPACER (Used on 44" & 50" Mower Decks) TRUNNION, Powdered Metal ROD, Lower Lift, LG A 1 SHAFT ASSEMBLY, Lift ROD, Lift, 5.43 LG SPRING, Extension 5.10 LG Black (Used on 44" & 50" Mower Decks) Lift Group - Manual Footnotes: LT-200 SERIES 35

35 38" Mower Deck - Housing, Arbors & Blades Group 36 LT-200 SERIES

36 Item Part No Qty Description NUT, Push, 3/ ROD, Deflector BOLT, Carriage, 5/16-18 x 3/ A 1 BRACKET, Hinge 9GA SPRING, Torsion NUT, Hex, Flange Whizlock, 5/ DEFLECTOR & SUPPORT ASSEMBLY, Chute Riveted A 2 PLATE, Rear (38" Only) PULLEY, 5.25 (38" Only) A 1 UPSTOP, "L" 10GA BEARING, Upper NUT, Hex Lock, ESNA Light, 5/8-18, Thin SPACER, Pulley, 38" Deck RETAINING RING, Extension, 1-3/ SCREW, Hex, Washer Head, Taptite, 3/8-16 x 3/ A 1 UPSTOP, "L" 10GA (38" Only) HOUSING, 38" (38" Only) FITTING, Grease SHAFT, Spindle, 38" Deck Z 1 TUBE & PLATE ASSEMBLY, Spindle WASHER, Belleville NUT, Hex 9/ BLADE, Mower 38" (38" Only) WASHER, Spindle Blade Powdered Metal A 2 COVER, Spindle (38" Only) (CE/Export) A 3 SUPPORT, Spindle Cover (38" Only) (CE/Export) SCREW, Tapitite 1/4-20 x 1/2 (38" Only) (CE/Export) RIVET A 2 GUARD, Belt A 1 GUARD A 1 GUARD, Belt 38" Mower Deck - Housing, Arbors & Blades Group Footnotes: LT-200 SERIES 37

37 38" & 42" Mower Deck - Housing, Arbors & Blades Group 38 LT-200 SERIES

38 38" & 42" Mower Deck - Housing, Arbors & Blades Group Item Part No Qty Description NUT, Push, 3/ ROD, Deflector BOLT, Carriage, 5/16-18 x 3/ A 1 BRACKET, Hinge 9GA SPRING, Torsion NUT, Hex, Flange Whizlock, 5/ DEFLECTOR & SUPPORT ASSEMBLY, Chute Riveted A 2 PLATE, Rear (38 Only) A 2 PLATE, Rear (42 Only) PULLEY (42 Only) PULLEY (38 Only) A 1 UPSTOP, L 10GA BEARING, Upper NUT, Hex Lock, ESNA Light, 5/8-18, Thin SPACER, Pulley, 38 Deck RETAINING RING, Extension, 1-3/ SCREW, Hex, Washer Head, Taptite, 3/8-16 x 3/ A 1 UPSTOP, L 10GA (38 Only) D 1 HOUSING, 42 (42 Only) D 1 HOUSING, 38 (38 Only) FITTING, Grease SHAFT, Spindle, 38 Deck A 1 TUBE & PLATE ASSEMBLY, Spindle WASHER, Belleville NUT, Hex 9/ BLADE, Mower 42 (42 Only) BLADE, Mower 38 (38 Only) WASHER, Spindle Blade Powdered Metal Footnotes: LT-200 SERIES 39

39 38" & 42" Mower Deck - Housing, Arbors & Blades Group 40 LT-200 SERIES

40 38" & 42" Mower Deck - Housing, Arbors & Blades Group Item Part No Qty Description NUT, Push, 3/ ROD, Deflector BOLT, Carriage, 5/16-18 x 3/ A 1 BRACKET, Hinge 9GA SPRING, Torsion NUT, Hex, Flange Whizlock, 5/ DEFLECTOR & SUPPORT ASSEMBLY, Chute Riveted A 2 PLATE, Rear (38" Only) A 2 PLATE, Rear (42" Only) PULLEY, 5.25 (38" Only) PULLEY, 5.50 (42" Only) PULLEY, 7.00 (42" Only) (CE/Export) A 1 UPSTOP, "L" 10GA BEARING, Upper NUT, Hex Lock, ESNA Light, 5/8-18, Thin SPACER, Pulley, 38" Deck RETAINING RING, Extension, 1-3/ SCREW, Hex, Washer Head, Taptite, 3/8-16 x 3/ A 1 UPSTOP, "L" 10GA (38" Only) HOUSING, 42" (42" Only) HOUSING, 38" (38" Only) FITTING, Grease SHAFT, Spindle, 38" Deck Z 1 TUBE & PLATE ASSEMBLY, Spindle WASHER, Belleville NUT, Hex 9/ A 2 BLADE, Mower 42" (42" Only) BLADE, Mower 38" (38" Only) WASHER, Spindle Blade Powdered Metal A 2 COVER, Spindle (38" Only) (CE/Export) A 3 SUPPORT, Spindle Cover (38" Only) (CE/Export) SCREW, Tapitite 1/4-20 x 1/2 (38" Only) (CE/Export) A 2 COVER, Pulley (42" Only) (CE/Export) A 2 SCREW, Taptite 5/16-20 x 1/2 (42" Only) (CE/Export) LOCKWASHER, Interior Tooth 5/8 (42" Only) (CE/Export) A 1 GUARD, Pulley (38" - France Only) A 1 GUARD, Belt (38" - France Only) A 2 GUARD, Belt (38" - France Only) RIVET, Pop (38" - France Only) Footnotes: LT-200 SERIES 41

41 38" & 42" Mower Deck - Belt, Idler Arm & Hitch Group 42 LT-200 SERIES

42 38" & 42" Mower Deck - Belt, Idler Arm & Hitch Group Item Part No Qty Description A 1 GUARD, Spring (Used on Kevlar Belts) A 1 GUARD, Spring (Used on A-Wedge Aramid Belts) CAPSCREW, Hex Washer Head, Taptite, 3/8-16 x WASHER, Plain, 13/32 x 1-1/2 x 1/ A 1 ARM SPACER, ID x 1-1/2 OD x 1.04 LG Powdered Metal CAPSCREW, Hex Head, 3/8-16 x 2-1/ WASHER, 3/ IDLER, Flat NUT, Hex, Flange Whizlock, 5/ CAPSCREW, Hex Head, 3/8-16 X 1-3/ A 1 SUPPORT, Idler NUT, Whizlock, 3/ SPRING, Extension LG Black NUT, 3/8-16, Hex Flange MAC Locking Large, Black BOLT, Carriage, 5/16-18 x 3/ V-BELT, LG Kevlar (Used on 38" Domestic Models) V-BELT, LG Kevlar (Used on 42" Domestic Models) V-BELT, LG A-Wedge Aramid (Used on 38" CE/Export Models) V-BELT, LG A-Wedge Aramid (Used on 42" CE/Export Models) Footnotes: LT-200 SERIES 43

43 38" & 42" Mower Deck - Height Adjustment & Roller Bar Group 44 LT-200 SERIES

44 Item Part No Qty Description BOLT, Rear Wheel (42" Only) WASHER, 1/2 (42" Only) WHEEL, Gauge (42" Only) NUT, Hex, Flange Whizlock, 5/16-18 (38" Only) NUT, Hex, Flange Whizlock, 5/16-18 (42" Only) A 1 SUPPORT, Gauge Wheel RH 7 GA (42" Only) NUT, Hex Flange, 3/8-16 ESNA (42" Only) BOLT, Carriage, 5/16-18 x 3/4 (38" Only) BOLT, Carriage, 5/16-18 x 3/4 (42" Only) D 1 SUPPORT, Mower RH D 1 BRACE, Mower Support (38" Only) D 1 SUPPORT, Mower LH A 1 SUPPORT, Gauge Wheel LH 7 GA (42" Only) D 1 HITCH, Front 38" Mower D 1 HITCH, Front 42" Mower PIN, Hitch SPACER,.532 ID x 3/4 OD x 1-1/4 LG Yellow NUT, ESNA, Lock, 1/2-13 (Thin) CLIP, Pin, Safety A 1 HANGER, Front Mower ROD, Bail Mowers Yellow 38" & 42" Mower Deck - Height Adjustment & Roller Bar Group Footnotes: LT-200 SERIES 45

45 40" Mower Deck - Housing, Arbors & Blades 46 LT-200 SERIES

46 Item Part No Qty Description CAPSCREW, Hex Head, 7/16-14 x 2-3/4 G WASHER, 7/ WASHER, Spring CAPSCREW, Hex Head, 7/16-14 x 3-1/ PULLEY, Drive 6" HUB SPROCKET & FLANGE ASSEMBLY, w/screws, 38 Tooth SHIELD, Bearing Upper, Arbor A 2 HOUSING, Arbor Top GASKET, Foam Poly ARBOR SHAFT & BEARINGS ASSEMBLY A 2 HOUSING, Arbor Bottom with Lube Fitting CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 3/ COVER, Arbor, LH HOUSING ASSEMBLY, 40", Red A 1 BLADE, Mower, LH PIN, Blade A 2 ADAPTOR, Arbor WASHER, Spline CAPSCREW, Hex Head, 7/16-14 x 2-1/4 G CAPSCREW, Taptite Hex Washer Head, 5/16-18 x WASHER, Shim SHIELD, Arbor Bearing, Lower ADAPTER, Blade DEFLECTOR, Discharge A 1 BLADE, Mower, RH CARRIAGE BOLT, 5/16-18 x CARRIAGE BOLT, 1/4-20 x 7/ NUT, Push WASHER, 1/ CLAMP NUT, Hex 1/4-20, ESNA DOOR, Mulching, Black Plastic SPRING, Torsion ROD, Pivot NUT, Hex 5/16-18, ESNA WASHER, 5/ NUT, Push COVER, Arbor 40" Mower Deck - Housing, Arbors & Blades Footnotes: LT-200 SERIES 47

47 40" Mower Deck - Housing, Arbors & Blades 48 LT-200 SERIES

48 40" Mower Deck - Housing, Arbors & Blades Item Part No Qty Description RIVIT, Pop WASHER, 3/16 x 3/4 x 1/ SHIM-Cover LH 7GA 40" Mower GUARD, Pulley Footnotes: LT-200 SERIES 49

49 40" Mower Deck - Belt, Idler Arm & Hitch 50 LT-200 SERIES

50 Item Part No Qty Description NUT, Hex Lock Esna Light, 3/ WASHER, 3/ PULLEY, Idler V-BELT, Mower Drive (82.0 EL, HA Sect.) A 1 BELT GUIDE ASSY WASHER A 1 IDLER ASSY BOLT, Carriage, 3/8-16 x CAPSCREW, Hex, 3/8-16 x WASHER SPRING, Extension SPACER, CAPSCREW, Hex Head, 3/8-16 x 2-1/ PULLEY SPACER NUT, Hex Flange Whiz Lock, Large, 3/ WASHER & NUT ASSEMBLY, 3/8 x 1-1/ SPRING, Extension A 1 ARM, Idler HUB, Pulley PULLEY, Idler BOLT, Hex Flange 3/8-16 x CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 1/ SPACER BELT, Timing, 38 Tooth, Arbor Drive SPACER A 1 PLATE ASSY, Idler CAPSECREW, 3/8-16 x 3/4 40" Mower Deck - Belt, Idler Arm & Hitch Footnotes: LT-200 SERIES 51

51 40" Mower Deck - Height Adjustment & Roller Bar 52 LT-200 SERIES

52 Item Part No Qty Description A 1 HANGER, Front PIN, Hitch RETAINER, Pin Spring SPACER NUT, Hex Lock ESNA Light, 1/2-13,Thin ROD, Bail A 2 PLATE, Pivot Lock NUT, Hex Flange 5/16-18, Whiz Lock SCREW, Hex Flange 5/16-18 x 3/ NUT, Hex Flange ESNA 3/ WHEEL WASHER, Flat 3/ BOLT, Wheel 3/8-16 x A 2 UPSTOP SCREW, Taptite 5/16-18 x 3/4 40" Mower Deck - Height Adjustment & Roller Bar Footnotes: LT-200 SERIES 53

53 44" Mower Deck - Housing, Arbors & Blades Group 54 LT-200 SERIES

54 Item Part No Qty Description NUT, Hex, Flange, 9/ WASHER, Belleville PULLEY, RH Arbor & LH Arbor, 4-1/ HUB, Pulley, RH (Middle) SPACER A 3 COVER, Arbor Housing BEARING GASKET, Foam A 3 HOUSING, Arbor Bottom, w/lube Fitting FITTING, Grease HUB, Adapter, LH A 1 COVER, Arbor CAPSCREW, Hex Head, Taptite, 5/16-18 x 3/ WASHER SHAFT, Arbor SHIELD, Grass, Lower BLADE, WASHER, Hex WASHER, Spring CAPSCREW, Hex Head, 7/16-14 x 1-1/ BOLT, Carriage, 5/16-18 x 3/ BOLT, Carriage, 5/16-18 x 3/4 (CE Only) A 1 BAFFLE, Anti-Blowout NUT, Hex, Flange Whizlock, 5/ NUT, Hex, Flange Whizlock, 5/ A 1 BAFFLE, Blowout LH, 44 (CE Only) A 1 BAFFLE, Blowout RH, 44 (CE Only) SHAFT, Arbor, RH CARRIAGE BOLT, 1/4-20 x 1, Black COVER, Arbor, RH NUT, Push On WASHER, Plain, 1/4 (6 Total for Export) CLAMP NUT, Hex Lock, ESNA, 1/ WASHER, Flat, 5/ DEFLECTOR, Plastic SPRING A 1 ROD, Deflector, Front D 1 HOUSING ASSEMBLY, 44 Mower Frame Mount PLUG, Plastic (Not Shown) 44" Mower Deck - Housing, Arbors & Blades Group Footnotes: LT-200 SERIES 55

55 44" & 50" Mower Deck - Belt, Idler Arm & Hitch Group 56 LT-200 SERIES

56 44" & 50" Mower Deck - Belt, Idler Arm & Hitch Group Item Part No Qty Description NUT, Hex Flange Center Locking, 3/ WASHER, Plain, 13/32 x 1-1/2 x 1/ A 1 ARM, Idler 7GA SPACER CAPSCREW, Hex Head, 3/8-16 x 2-1/ WASHER, 3/ PULLEY ASSEMBLY SPACER NUT, Whizlock, 3/ SPRING, Extension, Idler Arm (44 Mower Deck) SPRING, Extension, Idler Arm (50 Mower Deck) V BELT, Arbor Drive, V BELT, Arbor Drive, 44 (CE Only) V-BELT, Arbor Drive, V-BELT, Arbor Drive, 50 Deck, " LG HA used on CAPSCREW, Hex Head, 3/8-16 x 1-1/4, G8 Footnotes: LT-200 SERIES 57

57 44" & 50" Mower Deck - Height Adjustment & Roller Bar Group 58 LT-200 SERIES

58 44" & 50" Mower Deck - Height Adjustment & Roller Bar Group Item Part No Qty Description CLIP, Pin, Safety A 1 HANGER, Front Mower NUT, ESNA, Lock, 1/2-13 (Thin) SPACER PIN, Hitch ROD, Bail Mowers Yellow A 2 PLATE, PIVOT Lock 10 GA NUT, Hex, Flange Whizlock, 5/ CAPSCREW, Hex Head, Flange Whiz Lock, 5/16-18 x 3/ NUT, Hex Flange, 3/8-16 ESNA WASHER, 1/ WHEEL, Gauge BOLT, Rear Wheel Footnotes: LT-200 SERIES 59

59 50" Mower Deck - Housing, Arbors & Blades Group 60 LT-200 SERIES

60 50" Mower Deck - Housing, Arbors & Blades Group Item Part No Qty Description NUT, Hex, Flange, 9/ WASHER, Belleville PULLEY, RH Arbor & LH Arbor, 4-1/ HUB, Pulley, RH A 3 COVER, Arbor Housing BEARING HUB, Adapter, LH SPACER GASKET, Foam A 3 HOUSING, Arbor Bottom, w/lube Fitting FITTING, Grease A 1 COVER, Arbor CAPSCREW, Hex Head, Serrated Flange Taptite, 5/16-18 x 2 G NUT, 1/ CAPSCREW, Hex Head, Taptite, 5/16-18 x 3/ D 1 HOUSING ASSEMBLY, 50 Frame Hung WASHER SHAFT, Arbor SHIELD, Grass, Lower BLADE, 18-1/8, 50 Deck (Was ) WASHER, Hex WASHER, Spring CAPSCREW, Hex Head, 7/16-14 x 1-1/ BOLT, Carriage, 5/16-18 x 3/ A 1 BAFFLE, Anti-Blowout NUT, Hex, Flange Whizlock, 5/ SHAFT, Arbor, RH CARRIAGE BOLT, 1/4-20 x 1, Black COVER, Arbor, RH NUT, Push On WASHER, Plain, 1/4 (6 Total for Export) CLAMP NUT, Hex Lock, ESNA, 1/ DEFLECTOR, Plastic WASHER, Flat, 5/ SPRING A 1 ROD, Deflector, Front PLUG, Plastic Footnotes: LT-200 SERIES 61

61 50" Mower Deck - Housing, Arbors & Blades Group 62 LT-200 SERIES

62 Item Part No Qty Description NUT, Hex Flange 9/ PULLEY HUB A 3 HOUSING, Arbor Top BEARING, Ball 11/16 x 9/16 x 15/ SPACER, Powdered Metal GASKET A 3 HOUSING, Arbor Bottom w/lube Fitting SCREW, Hex Washer Head Taptite 5/16-18 x 3/ A 1 COVER, Arbor D 1 HOUSING ASSEMBLY, 50" (Red) CARRIAGE BOLT, 5/16-18 x 3/4 G A 1 BAFFLE, Blowout, Short NUT, Hex Flange 5/16-18, Whiz Lock Small WASHER, Cup SHAFT, Arbor SHIELD, Grass Lower Arbor, Heat Treated BLADE, Mower 18.12" LG (Was ) WASHER, Hex 11/16 x WASHER, Spring CAPSCREW, Hex Head 7/16-14 x 1-1/4 G SHAFT, Arbor CARRIAGE BOLT, 1/4-20 x 1 G COVER, Arbor NUT, Push for 1/4 Diameter Thread WASHER, 1/ CLAMP, Wire WASHER, 5/ SPRING, Torsion, Chute NUT, Hex Lock ESNA Light 1/ DEFLECTOR ROD, Deflector HUB PLUG WASHER, Bellville SCREW, Hex Head Serange Flange Taptite 5/16-18 x CARRIAGE BOLT, 1/4-20 x 1-1/2 G5 50" Mower Deck - Housing, Arbors & Blades Group Footnotes: LT-200 SERIES 63

63 Decals Group 64 LT-200 SERIES

64 Decals Group Item Part No Qty Description DECAL, Snapper, LH Hood Stripe DECAL, Snapper, RH Hood Stripe DECAL, Ignition Switch Symbol, White/Black DECAL, Steering Wheel Icon DECAL, Height of Cut DECAL, Snapper Rear Stripe, Silver/ 8.5LG DECAL, Transmission Tow/ Release Lever DECAL, Fuel Level DECAL, Tunnel DECAL, Safety Instructions (CE) DECAL, Belts & Blades 11 1 * DECAL, ID Plate DECAL, LT HP DECAL, LT200 20HP DECAL, LT200 22HP DECAL, Danger, Chute in Place DECAL, Pinch Point DECAL, Danger, Hand Under Deck 16 1 * DECAL, OPEI DECAL, DECAL, DECAL, DECAL, Hand Under Deck (CE) Footnotes: Note* Not a serviceable part. LT-200 SERIES 65

65 Decals Group 66 LT-200 SERIES

66 Decals Group Item Part No Qty Description DECAL, Snapper, LH Hood Stripe DECAL, Snapper, LH Hood Stripe (Model Only) DECAL, Snapper, RH Hood Stripe DECAL, Snapper, RH Hood Stripe (Model Only) DECAL, Ignition Switch Symbol, White/Black DECAL, Steering Wheel Icon DECAL, Steering Wheel Icon (Model Only) DECAL, Height of Cut Not Used on 40" Mower DECAL, Snapper Rear Stripe, Silver/ 8.5LG DECAL, Snapper Rear (Model Only) DECAL, Transmission Tow/ Release Lever DECAL, Fuel Level DECAL, Tunnel DECAL, Safety Instructions (CE/Export) DECAL, Tunnel (France Models Only) DECAL, Safety Instructions (Used only on ACS models)(ce/export) DECAL, Belts,Blades (France Models Only) DECAL, Belts, Blades * DECAL, ID Plate DECAL, LT HP DECAL, LT200 20HP DECAL, LT200 22HP DECAL, Danger, Chute in Place Not Used on 40" Mower DECAL, Pinch Point Not Used on 40" Mower DECAL, Danger, Hand Under Deck Not Used on 40" Mower * DECAL, OPEI DECAL, 38" DECAL, 42" DECAL, 44" DECAL, 46" DECAL, 50" DECAL, Hand Under Deck (CE/Export) Footnotes: Note* Not a serviceable part. LT-200 SERIES 67

67 Electrical Group 68 LT-200 SERIES

68 Electrical Group Item Part No Qty Description SWITCH ASSEMBLY, Ignition, 6-Pole (Includes Ref. 2, 3, 4 & 5) WASHER, 5/ LOCKWASHER, Internal Tooth, 5/ NUT, Hex, Flange, 5/ COVER, Ignition IGNITION KEY (Set of 2) SWITCH, Headlights, 2 Terminal PLUG, Hole, Square PLUG, Hour Meter (Kohler and B&S Single) METER, Hour, LCD (B&S V-Twin Only) WASHER, Plain, 1/4 (6 Total for Export) NUT, Wing, 1/ BOLT, Carriage, 1/4-20 x 7/ NUT, Push On HOLD DOWN, Battery SWITCH, Push Button (NC) TIE, Self Locking 7-5/ OUTLET, 12 Volt DC Power PLUG, Hole Models W/O 12V Adapter SWITCH, Push Button (NO/NC) A 1 SUPPORT, Battery 12 GA SCREW, Taptite, 5/16-18 x 5/ HEADLIGHT ASSEMBLY (Includes Ref. Nos. 24, 25, 26 & 27) SOCKET ASSEMBLY BULB, V 21CP REFLECTOR, Headlight LENS, Headlight CLIP, Speed Wire NUT, Hex, Flange, 1/ COVER, Terminal HARNESS, Wiring (Use on models with 12 Volt Outlet) HARNESS, Wiring (Use on models without 12 Volt Outlet) CABLE, Solenoid to Starter SOLENOID SCREW, Taptite, 1/4-20 x 1/ LOCKWASHER, External Tooth, 5/ NUT, Hex, 5/16-24 NF CABLE, #6 x 10 Long, with 2 Ring Terminals, Battery to Solenoid NUT, Hex, Flange Whizlock, 5/ A 1 SUPPORT, RMO Switch BOLT, Carriage, 5/16-18 x 3/ BOOT, Insulator BATTERY, 12 Volt, 230CCA BATTERY, 12 Volt, 230CCA (CE/Export) Footnotes: LT-200 SERIES 69

69 Electrical Group 70 LT-200 SERIES

70 Electrical Group Item Part No Qty Description SWITCH, Push Button (NO), Reverse Pedal NUT, Hex, Full, 1/ LOCKWASHER, 1/ WASHER, 1/4 I.D CABLE, Battery to Ground CAPSCREW, Hex Head, 1/4-20 x 3/ FUSE, Wiring Harness SWITCH, RMO Module Only KEY, w/hang Tag for RMO Module SWITCH, PTO, Push/Pull Symbols Footnotes: LT-200 SERIES 71

71 Wiring Schematic ( ) 72 LT-200 SERIES

72 Wiring Schematic ( ) Item Part No Qty Description Wiring Schematic (for Harness) Footnotes: LT-200 SERIES 73

73

74 Parts Manual for RMO TRACTORS LT-200 SERIES IT IS THE POLICY OF BRIGGS & STRATTON CORP TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS Briggs & Stratton Yard Power Products Group 535 Macon Road McDonough, GA, U.S.A Copyright 2012 Briggs & Stratton Corporation Milwaukee, WI USA. All Rights Reserved Revision: C 3/20/2012