Parts Manual RZ4219 / RZ4219 BF /

Transcription

1 Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual RZ4219 / RZ4219 BF / Please read the operator s manual carefully and make sure you understand the instructions before using the machine.

2 When you need spare parts or support in service questions, warranty issues, etc., please consult the following professional: This Parts Manual belongs to the machine with the manufacturing number: Engine Transmission Manufacturing Number The machine s manufacturing number can be found on the printed plate affixed to the engine compartment. Stated on the plate, from the top are: The machine s type designation (I.D.). The manufacturer s type number (Model). The machine s serial number (Serial no.) Please have the type designation and serial number available when ordering spare parts. The engine s manufacturing number is stamped on one of the valve covers. The plate states: The engine s model. The engine s type. Code Please have these available when ordering spare parts. Wheel motors and hydrostatic pumps have a barcode decal affixed at the rear All rights reserved. Orangeburg SC. Printed in U.S.A.

3 CONTENTS FRAME... 4 ENGINE PLATE... 6 STEERING... 8 IGNITION SYSTEM HYDRAULIC PUMP / MOTOR WHEELS / TIRES BRAKE / DECK LIFT... MOWER DECK / CUTTING DECK SEAT DECALS NOTE: ALL FASTENERS ARE GRADE 5 UNLESS OTHERWISE SPECIFIED.

4 FRAME

5 FRAME ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION FRAME TUBE, LT ORG FRAME TUBE, RT ORG BAR, IMPACT ORG PANEL, SEAT SUPPORT ORG FOOT PLATE w/decals ORG FOOT REST ORG BRACKET, FRONT DECK BLK SUPPORT, TANK BLK PLATE, RT ORG PLATE, LT ORG BUSHING STUD w/ ANTI-ROTATE GROMMET, BUMPER RETAINER, U TYPE HAIRPIN HCS 5 /-18 x 2¼ HCS 3 /8- x 2¼ HCS 5 /-18 x ¾ HCS 5 /-18 x 2¾ HCS 5 /-18 x SCREW ¼-20 x 5 /8 SLF TAP BOLT 3 /8- x 2 5 /8 THD FRM FOAM STRIP RHSNB 3 /8- x RHSNB 3 /8- x ¾ RHSNB 5 /-18 x ¾ NUT 3 /8- HEX JAM NYLOC NUT 3 /8- FLANGE NYLOC NUT 5 /-18 HEX FLANGE NYL NUT 5 /-18 HEX WHIZLK NUT 5 /-18 HEX NYLOC WASHER 5 / SAE FLT WASHER 3 /8 SAE FLT WASHER 5 /8 SAE FLT 5

6 ENGINE PLATE Torque to ft-lbs 6

7 ENGINE PLATE ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION PLATE, ENGINE ORG GUIDE, BELT ARM, IDLER PULLEY, IDLER PULLEY, ENGINE SPRING 3½ SPACER BUSHING, METAL KEY ¼ SQ x 2½ LG HCS 3 /8- x HCS 7 /-20 x HCS 5 /-18 x HCS 3 /8- x HHFS 3 /8- x 1 THD FRM BOLT 3 /8- x 1 THD FRM WASHER 5 / SAE FLT WASHER 3 /8 FLT STD WASHER WASHER 3 /8 x ¾ SPEC NUT 3 /8- HEX JAM NYLOC NUT 5 /-18 HEX WHIZLK NUT 5 /-18 HEX FLANGE NYL NUT 3 /8- HEX FLANGE NYL NOT SHOWN FITTING, OIL DRAIN B&S HOSE, OIL DRAIN, B&S PIGTAIL B&S 7

8 STEERING

9 STEERING ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION LOWER LEVER, RT LOWER LEVER, LT SUPPORT, STEER CNTRL RT SUPPORT, STEER CNTRL LT PIVOT, RT PIVOT, LT GRIP LEVER, UPPER DAMPENER BUSHING ½ ID x ¾ OD BUSHING ZERK HCS 5 /-18 x 1½ HCS ½-13 x 2¾ HCS 5 /-18 x HCS 5 /-18 x HCS ¼-20 x 1¾ RHSNB 5 /-18 x ¾ BOLT, HEX 5 /-18 x 2½ TPBLT WASHER ½ SAE WASHER 5 /8 BELLEVILLE WASHER, SPECIAL WASHER 5 / SAE FLT NUT 5 /-18 HEX NUT 5 /-18 HEX WHIZLK NUT 5 /-18 HEX NYLOC NUT ½-13 JAM NYLOC GR NUT 5 /8-11 NYLOC NUT ¼-20 JAM NUT 5 /-18 FLG HEX NYLOC 9

10 10 IGNITION SYSTEM

11 IGNITION SYSTEM ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION FENDER, RT FENDER, LT SWITCH SOLENOID BATTERY SWITCH, IGNITION SWITCH, INTERLOCK HOLD DOWN, BATTERY KEY, IGNITION PANEL, CONTROL CABLE, THROTTLE CABLE, CLUTCH CLUTCH ASSY BATTERY CABLE, NEGATIVE TERMINAL COVER, SM TANK, FUEL CAP, FUEL w/ TETHER STEM, FUEL TANK GROMMET GROMMET GROMMET VALVE, FUEL VALVE, FUEL CHECK CLAMP, HOSE CLAMP, HOSE KNOB, CLUTCH KNOB, THROTTLE HOSE 3 / x 20" FUEL HOSE ¼ x HOSE ¼ x HCS ¼-20 x ¾ SCREW #10-24 x 5 / RHSNB 5 /-18 x ¾ RHSNB ¼-20 x ¾ GR BOLT ¼ x 7½ SCREW ¼-20 x 5 /8 SLF TAP WASHER ¼ SAE FLT NUT 5 /-18 HEX FLANGE NYL NUT ¼ PUSH NYLON NUT #10-24 HEX NYLOC NUT ¼-20 HEX NYLOC NUT ¼-20 HEX THIN NYLOC NOT SHOWN CABLE, POSITIVE CABLE, POSITIVE LONG WIRING HARNESS WIRE TIE 11

12 HYDRAULIC PUMP / MOTOR

13 HYDRAULIC PUMP / MOTOR ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION HYDRO, RT HYDRO, LT ROD END, RT ROD END, MALE LT RELEASE HANDLE, RT RELEASE HANDLE, LT BELT, EZT SPACER, HYDRO ROD, CONTROL ROD END COUPLER HAIRPIN COTTER HCS 5 /-18 x 2¾ HCS 5 /-18 x 2¼ HCS 5 /-18 x HCS 3 /8- x 2¼ NUT 5 /-18 HEX FLANGE NYL NUT 5 /-24 HEX JAM NUT 5 /-24 HEX JAM LT WASHER 3 /8 STD FLT WASHER 5 / SAE FLT 13

14 WHEELS / TIRES

15 WHEELS / TIRES ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION CASTER TIRE ASSY WHEEL ASSY REAR RIM, CASTER RIM, x TIRE PLY TIRE 18 x 7.5 x 8 4 PLY YOKE, CASTER ZERK ZERK BUSHING, WHEEL BUSHING, CASTER VALVE SPACER SPACER 5 / SPRING, CASTER CAP, GREASE PLUG, CASTER BEARING, FLANGED HHB 5 /-18 x 1 NYLOC RHSNB ½-13 x 6½ NUT ½ HEX CNTRLK NUT ½ LUG WASHER ½ FLT WASHER 15

16 BRAKE / DECK LIFT

17 BRAKE / DECK LIFT ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION HANDLE, LIFT BLK HANDLE, BRAKE BLK SHAFT, LIFT BLK LINKAGE, BRAKE RT LINKAGE, BRAKE LT LINKAGE, UPPER PIVOT, BRAKE ARM BELLCRANK, BRAKE SPRING L-ROD 3 1 /8" ROD, BRAKE BUSHING, PLASTIC GRIP, BRAKE HANDLE GRIP, LIFT HANDLE SWIVEL SWIVEL, BRAKE HAIRPIN HAIRPIN COTTER ROLL PIN 3 /" RHSNB 3 /8- x 1¼ SCREW x 5 /8" WSH HD NUT 5 /-18 HEX NYLOC NUT 3 /8- HEX NYLOC NUT 3 /8- HEX JAM NYLOC WASHER 5 / SAE FLAT WASHER 3 /8 FLAT STD WASHER 7 / SPRING DISK WASHER,

18 18 MOWER DECK / CUTTING DECK

19 MOWER DECK / CUTTING DECK ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION DECK w/ SAFETY DECALS BLADE 42" BELT SUSPENSION ARM, REAR STRIPPER, ROUND BELT SHIELD, RT BELT SHIELD, LT BRACKET, DEFLECTOR MANDREL SHIELD, DEFLECTOR PULLEY, MANDREL ROD, HINGE SPRING, TORSION CAP, SLEEVE PULLEY, IDLER PULLEY, IDLER KEEPER, PULLEY ARM, IDLER ARM, LT BRAKE LINK, SUSPENSION SWIVEL COUPLING, CONNECT SPACER RETAINER SPRING, RETURN ARM, BRAKE LINKAGE, DECK BRAKE BALL END, RT PORT, WASHOUT GUIDE, BELT BAFFLE, DECK KEEPER, BELT RETAINER HAIR PIN HAIRPIN# HCS 5 /-18 x 1½ HCS 3 /8- x HCS 3 /8- x 1¾ HCS 3 /8- x SCREW 5 /-18 WSH HD SCREW ¼-20 x 5 / RHSNB 5 /-18 x 5 / BOLT x 5 /8 WSH HD BOLT 3 /8- x 3 /8 SKT HD BOLT, WASHER PUSHNUT NUT 3 /8- HEX JAM NYLOC NUT 7 /-20 HEX NYLOC NUT 5 /-18 HEX FLANGE NYL NUT 9 / TOP CNTRLK NUT 3 /8- HEX FLANGE NYL NUT 5 /-18 HEX WHIZLK NUT 5 /-18 HEX WASHER, FRICTION WASHER, SPACER WASHER 3 /8 SAE FLT WASHER 5 / SAE FLT WASHER, SAE WASHER, HEAVY 19

20 SEAT

21 SEAT ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION SEAT PLATE, SEAT ORG SWITCH, SEAT N/C STOP, SEAT HANDLE, SEAT SLIDE SPRING, SEAT SLIDE SPRING, SEAT SEAT SUPPORT, REAR ORG BRACKET, FUEL TANK BLK CAP, SPRING BOLT 5 /-SHOULDER HCS 5 /-18 x ¾ HCS 3 /8- x 5 / SCREW ¼-20 x 5 /8 SLF TAP RHSNB 3 /8- x ¾ NUT 3 /8- FLANGE NYLOC NUT 5 /-18 HEX FLANGE NYL WASHER 5 / SAE FLT 21

22 DECALS

23 DECALS ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION DECAL, BELT ROUTING DECAL, HUSQVARNA DECAL, SAFETY WARNING DECAL, WARNINGS DECAL, PARK BRAKE DECAL, CROWN DECAL, EXHAUST DECAL, SERVICE DECAL, BATTERY WARNING DECAL, DO NOT TOW PAD, ABRASIVE DECAL, CONTROL PANEL DECAL, DECK HEIGHT DECAL, BLADE ENGAGE DECAL, MOTION CONTROL DECAL, DEFLECT WARNING DECAL, BLADE WARNING FOOT PAD DECAL, SEVERING DECAL, RZ

24

25

26

27

28 Rev A