Reproduction. Not for HYDRO DRIVE ELECTRIC CLUTCH 42" & 46" LAWN TRACTOR LT-125 SERIES. Parts Manual for LT LT24460

Transcription

1 Parts Manual for HYDRO DRIVE ELECTRIC CLUTCH 42" & 46" LAWN TRACTOR LT-125 SERIES Model No. Description LT LT24460 Briggs & Stratton Yard Power Products Group 535 Macon Road McDonough, GA, U.S.A Manual No Revision: B 10/30/2012

2

3 Table Of Contents PAGE GROUP 4 Wheels & Tires Group 6 Hood, Grille & Dash Group 8 Seat Deck & Fuel Tank Group 10 Steering Group 12 Frame & Front Axle Group 16 Engine Group - 23HP 18 Engine Group - 24HP 20 Controls Group 22 Transmission Group 24 Transmission SERVICE PARTS - Tuff Torq K46BP 28 Lift Group - Manual 30 42" Housing, Arbor & Blades Group 32 42" Mower Deck - Belt, Idler Arm & Hitch Group 34 42" Mower Deck - Height Adjustment & Roller Bar Group 36 46" Mower Deck - Housing, Arbor & Blades Group 38 46" Mower Deck - Clutch Group 40 46" Mower Deck - Height Adjust Group - Frame Hung 42 Decals Group - 42" Deck 44 Decals Group - 46" Deck 46 Electrical Group HYDRO DRIVE ELECTRIC CLUTCH LT-125 SERIES 3 Manual No TP B-TC-N

4 Wheels & Tires Group Manual No HYDRO DRIVE ELECTRIC CLUTCH 4 LT-125 SERIES

5 Wheels & Tires Group Item Part No Qty Description Wheel & Tire, 22 x WHEEL & TIRE ASSEMBLY, 14.4 X BEARING, Front Wheel, 3/4" ID x 1.38" OD Hardened (Not shown) (Two per wheel) FITTING, Lube, 1/4 (Not shown) SPACER, 0.77 ID x 1-1/4 OD x 1.65 LG Powdered Metal Black KEY, 3/ HUB CAP RING, "E",.750 D T WASHER, G FL WASHER, FLAT Footnotes: HYDRO DRIVE ELECTRIC CLUTCH LT-125 SERIES 5 Manual No

6 Hood, Grille & Dash Group Manual No HYDRO DRIVE ELECTRIC CLUTCH 6 LT-125 SERIES

7 Hood, Grille & Dash Group Item Part No Qty Description D 1 HOOD, with Louver, (Red) DUCT, Air Inlet Plastic D 1 PANEL, Hood RH Side D 1 PANEL, Hood LH Side D 1 GRILLE BM 1 HINGE, Hood LH BM 1 HINGE, Hood RH CAPSCREW, Whizlock, 1/4-20 x 5/ NUT, Hex Flange Whiz, 1/4-20 (Was ) DASHBOARD (Was ) KNOB, Brake Lock Plastic KNOB, Cruise Lock Green Plastic NUT, Push Pal SCREW, 5/16-18X0.750, Washer Head Taptite, ZC/CL (Was ) WASHER, Plain, 5/16 (Was ) COVER, Steering Shaft Plastic (Was ) HEADLIGHT ASSEMBLY REFLECTOR, Headlight LENS, Headlight BULB, Headlight, # SOCKET, Headlight SCREW, Pan Head #10-24 x 1/2 (Or was a Pop Rivit) ROD, Dash Support NUT, Hex, Nylon, Lock, #10-24 (Was nut, or a Pop Rivit Washer) SCREW, 1/4-20X.500, Hex HD, Self-Tap, Zinc/Clear (Was ) GUIDE, Hood LH GUIDE, Hood RH INSERT, Lightbar (Was ) POSITIONER, Hood Footnotes: HYDRO DRIVE ELECTRIC CLUTCH LT-125 SERIES 7 Manual No

8 Seat Deck & Fuel Tank Group Manual No HYDRO DRIVE ELECTRIC CLUTCH 8 LT-125 SERIES

9 Seat Deck & Fuel Tank Group Item Part No Qty Description SEAT, Hi Back, Steel Pan WASHER, Plain, 5/ LATCH, Seat 20GA E-Coat CAPSCREW, Hex Head Flange Dog Point, 5/16-18 x SPACER, 0.32 ID x 1-1/2 OD x 3/10 THK Powdered Metal Yellow A 1 SUPPORT, Seat 12GA CARRIAGE BOLT, 5/16-18 x 3/ A 1 PIVOT, Seat 10GA BOLT, Carriage, 5/16-18 x 3/ NUT, Hex Flange, 5/16-18 ESNA BOLT, Shoulder 5/16-18 G SPRING, Compression WASHER, Spring Black COVER, Spring POD, LH Cup Holder ELBOW FITTING BUSHING TANK, Fuel CAP, Gas PAD, Footrest LH NUT, Hex, Flange Whizlock, 5/ PAD, Footrest RH D 1 DECK, Seat w/footrests SCREW, Hex, Washer Head, Plastite, 1/4-20 x 1/ SCREW, Taptite, 5/16-18 x 5/ POD, RH Lift Quadrant GRIP, Lift A 1 SUPPORT, Seat Footnotes: HYDRO DRIVE ELECTRIC CLUTCH LT-125 SERIES 9 Manual No

10 Steering Group Manual No HYDRO DRIVE ELECTRIC CLUTCH 10 LT-125 SERIES

11 Steering Group Item Part No Qty Description CAP, Steering Wheel, Plain NUT, Hex Lock, ESNA Light, 5/8-18, Thin WASHER, 5/ STEERING WHEEL, w/aluminum Insert RING, Klipring Extension WASHER BUSHING, Steering SHAFT, Steering Gear & Spline Yellow A 1 TOWER CAPSCREW, Hex Washer Head, Taptite, 5/16-18 x 5/8 Footnotes: HYDRO DRIVE ELECTRIC CLUTCH LT-125 SERIES 11 Manual No

12 Frame & Front Axle Group Manual No HYDRO DRIVE ELECTRIC CLUTCH 12 LT-125 SERIES

13 Frame & Front Axle Group Item Part No Qty Description CAP, Hub RING, Klipring Extension WASHER, 3/ AXLE, Front Iron Casting Machined FITTING, Zerk BUSHING, Axle Pivot Powdered Metal A 1 HOOK, "J" CAPSCREW, 7/16-14 x A 1 PLATE, Axle Support NUT, Hex Flange Two-Way Lock, 5/ NUT, Hex, Flange Whizlock, 5/ BUSHING, Powdered Metal A 1 ROD, Tie A 1 SPINDLE & CUP ASSEMBLY, RH NUT, Hex, Flange, Locking, 3/ A 1 SPINDLE & ARM ASSEMBLY, LH FRAME, 12 GA A 1 SUPPORT, Front Footrest RH SUPPORT, Rear Frame SCREW, Taptite, 5/16-18 x 5/ CAPSCREW, Hex Head, Flange Whiz Lock, 5/16-18 x 3/ A 1 SUPPORT, Front Footrest LH WASHER, Flat, 5/ CAPSCREW, Hex Head, 5/8-11 x 3-1/4 G LINK, Drag NUT, Hex Nylock 3/ A 1 PEDAL ASSEMBLY, Brake CAPSCREW, Hex Head, 3/8-16 x 1-1/4,.141 Thread G A 1 LATCH, Brake Lock BOLT, Shoulder, 5/16-18 x 1-1/ SPACER, Pivot A 1 PEDAL ASSEMBLY, Forward A 1 PEDAL, Reverse BOLT, Carriage, 5/16-18 x 1-1/ SPACER, Foot Pedal ACTUATOR, RMO Switch A 1 BRACKET, Pedal Pivot A 2 PLATE, Bearing A 1 SUPPORT, Battery LIFT SHAFT ASSEMBLY A 1 BRACKET, Sector Support GEAR, Steering SPACER, Sector Gear CAPSCREW, Hex Flange Whiz Lock, 3/8-16 x 1 Footnotes: HYDRO DRIVE ELECTRIC CLUTCH LT-125 SERIES 13 Manual No

14 Frame & Front Axle Group Manual No HYDRO DRIVE ELECTRIC CLUTCH 14 LT-125 SERIES

15 Frame & Front Axle Group Item Part No Qty Description NUT, Hex Flange, 3/ SUPPORT, Transmission Footnotes: HYDRO DRIVE ELECTRIC CLUTCH LT-125 SERIES 15 Manual No

16 Engine Group - 23HP Manual No HYDRO DRIVE ELECTRIC CLUTCH 16 LT-125 SERIES

17 Engine Group - 23HP Item Part No Qty Description 1 44L B1 1 * ENGINE, 23HP B&S Twin, Mod. 44L B VALVE, Shut Off Oil Drain A 1 SHIELD, Heat SCREW, Hex Washer Head Taptite 5/16-18 x 5/ A 1 SHIELD, Heat MUFFLER A 1 BRACKET, Muffler Mount PIPE, Exhaust R.H PIPE, Exhaust L.H SCREW, Hex Washer Head Taptite 1/4-20 x 1/ CLIP, Speed Wire CONTROL, Throttle (Choke a Matic) CLAMP, Hose HOSE, Fuel CLIP, Hose SCREW, Hex Washer Head Taptite 3/8-16 x LOCKWASHER, External Tooth 3/ WASHER, 3/ PULLEY & HUB ASSEMBLY, Engine TIE, Self Locking RETAINER, Clutch CLUTCH, Electric OGURA WASHER, Hex LOCKWASHER, Spring CAPSCREW, Hex Head 7/16-20 x 3-1/2 G GASKET, Exhaust SCREW, Hex Washer Head Taptite 3/8-16 x 1-1/ CAPSCREW, Hex Socket Head 5/16-18 x 3/4 G LOCKWASHER, Spring, 5/ A 1 SUPPORT, Muffler PIVOT, Hood BOLT, Carriage, 5/16-18 x NUT, Hex Flange, 5/16-18 Footnotes: NOTE* Purchase engine parts from engine manufacture dealer. HYDRO DRIVE ELECTRIC CLUTCH LT-125 SERIES 17 Manual No

18 Engine Group - 24HP Manual No HYDRO DRIVE ELECTRIC CLUTCH 18 LT-125 SERIES

19 Engine Group - 24HP Item Part No Qty Description 1 44M B1 1 * ENGINE, 24HP B&S Twin, Mod. 44M B VALVE, Shut Off Oil Drain A 1 SHIELD, Heat SCREW, Hex Washer Head Taptite 5/16-18 x 5/ A 1 SHIELD, Heat MUFFLER A 1 BRACKET, Muffler Mount PIPE, Exhaust R.H PIPE, Exhaust L.H SCREW, Hex Washer Head Taptite 1/4-20 x 1/ CLIP, Speed Wire CONTROL, Throttle (Choke a Matic) CLAMP, Hose HOSE, Fuel CLIP, Hose SCREW, Hex Washer Head Taptite 3/8-16 x LOCKWASHER, External Tooth 3/ WASHER, 3/ PULLEY & HUB ASSEMBLY, Engine TIE, Self Locking A 1 GUIDE, Belt, Long CLUTCH, Electric OGURA WASHER, Hex LOCKWASHER, Spring CAPSCREW, Hex Head 7/16-20 x 3-1/2 G GASKET, Exhaust SCREW, Hex Washer Head Taptite 3/8-16 x 1-1/ CAPSCREW, Hex Socket Head 5/16-18 x 3/4 G8 Footnotes: NOTE* Purchase engine parts from engine manufacture dealer. HYDRO DRIVE ELECTRIC CLUTCH LT-125 SERIES 19 Manual No

20 Controls Group Manual No HYDRO DRIVE ELECTRIC CLUTCH 20 LT-125 SERIES

21 Controls Group Item Part No Qty Description PAD, Foot Pedal Reverse SPACER, Pivot Powdered Metal NUT, Hex, Flange Whiz Lock, 5/ ROD, Cruise Latch, 16.97LG CLIP, Linkage, Black ROD, Parking Brake, LG Yellow BOLT, Carriage, 3/8-16 x 1-1/ A 1 BRACKET, Idler 7GA SPRING, Extension LG Black PULLEY, 3 OD Plastic NUT, Hex Flange, 3/8-16 ESNA BOLT, Carriage, 5/16-18 x PULLEY, Idler SPRING, Extension PIN, Cotter 3/32 x 3/ ROD, Brake, 15.1 LG SPRING, Extension LG Black PEDAL, Brake Rubber PIN, Quick ROD, Brake Return, LG ROD, Cruise Latch, 2.83 LG SPRING, Tension, Clutch LATCH, Cruise Powdered Metal BOLT, Shoulder 5/16-18 G PAD, Foot Pedal Forward Footnotes: HYDRO DRIVE ELECTRIC CLUTCH LT-125 SERIES 21 Manual No

22 Transmission Group Manual No HYDRO DRIVE ELECTRIC CLUTCH 22 LT-125 SERIES

23 Transmission Group Item Part No Qty Description TRANSMISSION ASSEMBLY, K46BP SCREW, Hex Flange Wiz Lock, 5/16-18 x 2-1/ NUT, Hex Flange Wiz Lock, 5/ ROD, 1/4 Dia. X 11-7/16 Lg PIN, Quick,1-3/ A 1 ARM, Control BOLT, Shoulder, 5/16-18 x 9/ NUT, Hex Flange Two Way Locking, 5/ A 1 STRAP, Torque CAPSCREW, Hex Head, 5/16-18 x 1-3/4, G SCREW, Hex Washr Head, Taptite, 5/16-18 x 3/ V-BELT, HA, 89-1/4 Lg NUT, Hex Flange, ESNA, 5/ WASHER, 5/16 x 1OD ROD, 3/8 Dia x 15-7/64 Lg COTTER PIN, 15/16 x 3/ SPRING, Extension, 5-3/ SPRING, Extension, 5/8 OD x 6-5/8 Lg Footnotes: HYDRO DRIVE ELECTRIC CLUTCH LT-125 SERIES 23 Manual No

24 Transmission SERVICE PARTS - Tuff Torq K46BP Manual No HYDRO DRIVE ELECTRIC CLUTCH 24 LT-125 SERIES

25 Transmission SERVICE PARTS - Tuff Torq K46BP Item Part No Qty Description *TRANSMISSION, Tuff Torq K46BP *KIT, Upper Case *LOWER CASE VENT VALVE MAGNET *MAGNET HOLDER *PUMP SHAFT/BEARING KIT *SPRING BYPASS SHAFT A LEVER, Bypass RING, Snap, SEALING CAP RING, Snap, C SEAL WASHER *KIT, Drain Bolt *SCREW, Tapping, 8 * SCREW, Tapping, 8 * *CENTER CASE E W/BALL IDS SERVICE KIT PIN, 3 * *FILTER BOLT, 10 * *IDS VALVE IDS SPRING *BALL, 3/ *KIT, Cylinder Block (Pump) SPRING PUMP SHAFT E-RING BEARING, 6202C MOTOR HOUSING *THRUST BEARING KIT, Cylinder Block WASHER, 12 * 24 * MOTOR SHAFT RING, Snap, S BRAKE DISC/MOTOR GEAR (11T) *BEARING, 6202 RSR C THRUST METAL *SWASH PLATE CMP THRUST BEARING K *CONTROL SHAFT *FULCRUM *SPRING, Torsion *CONTROL ARM A Footnotes: *Note: See your local authorized dealership for Tuff Torq parts and warranty or contact Tuff Torq at (U.S ; Int'l ) HYDRO DRIVE ELECTRIC CLUTCH LT-125 SERIES 25 Manual No

26 Transmission SERVICE PARTS - Tuff Torq K46BP Manual No HYDRO DRIVE ELECTRIC CLUTCH 26 LT-125 SERIES

27 Transmission SERVICE PARTS - Tuff Torq K46BP Item Part No Qty Description CONTROL LEVER C *JERKY PLATE WASHER, COTTER PIN, 1/8 * 3/ SPRING PIN 6 * ROLL PIN 6 * NUT *KIT, Differential Gear *FINAL GEAR (54T) *FINAL PINION COLLAR *REDUCTION SHAFT WASHER, 12 * 32 * *REDUCTION GEAR (37T) *FINAL PINION GEAR (10T) AXLE SHAFT, Left AXLE SHAFT, Right *THRUST WASHER RING SEAL 19 * 32 * BUSHING, 19 * *BUSHING, BRAKE SHOE BRAKE LEVER *BRAKE SHAFT *BRAKE RETURN SPRING BRAKE ACTUATOR SPRING PIN 5 * SPRING PIN 4 * PULLEY D FAN, White WASHER, Wave SNAP RING *SPRING PIN 3.0A * *SPRING PIN 3.0A * *SEALANT K46 & T40 SEAL KIT (ALL MODELS) *REPAIR KIT K46 Footnotes: *Note: See your local authorized dealership for Tuff Torq parts and warranty or contact Tuff Torq at (U.S ; Int'l ) HYDRO DRIVE ELECTRIC CLUTCH LT-125 SERIES 27 Manual No

28 Lift Group - Manual Manual No HYDRO DRIVE ELECTRIC CLUTCH 28 LT-125 SERIES

29 Lift Group - Manual Item Part No Qty Description DECAL, Height Of Cut CARRIAGE BOLT, 1/4-20 x 5/8 G A 1 QUADRANT, Lift Height 12GA NUT, Hex Flange Whiz, 1/ GRIP ROD, Lift Handle E-Coat, 17.7 LG CAPSCREW, Hex Head, 5/16-18 x WASHER, Plain, 21/64 x 1-1/ SPRING, Torsion, 2.12 LG Black A 1 CLEVIS, Lift 7GA SPACER, Pivot 0.330ID 1.76OD.37TH Powdered Metal NUT, Hex, Flange Whizlock, 5/ CLIP, Spring WASHER, 1/ PIN, Threaded Shoulder A 2 ARM, Lift Rear 10GA NUT, Hex, Flange, Whizlock, 5/16-18 x 1/ DECAL, CAUTION! Pinch Point BOLT, Shoulder NUT, Hex Flange, 3/8-16 ESNA SPACER TRUNNION, Powdered Metal ROD, Lower Lift, LG ROD, Lift, 5.43 LG SPRING, Extension 5.10 LG Black Footnotes: HYDRO DRIVE ELECTRIC CLUTCH LT-125 SERIES 29 Manual No

30 42" Housing, Arbor & Blades Group Manual No HYDRO DRIVE ELECTRIC CLUTCH 30 LT-125 SERIES

31 42" Housing, Arbor & Blades Group Item Part No Qty Description NUT, Push, 3/ ROD, Deflector BOLT, Carriage, 5/16-18 x 3/ A 1 BRACKET, Hinge 9 GA SPRING, Torsion NUT, Hex, Flange Whizlock, 5/ DEFLECTOR & SUPPORT ASSEMBLY, Chute Riveted A 2 PLATE, Rear PULLEY, 5.50,.68" Deep-Groove A 1 UPSTOP, "L" 10GA BEARING, Upper NUT, Hex Lock, ESNA Light, 5/8-18, Thin SPACER, Pulley, 1.755" OD,.655" ID,.280" Thick RETAINING RING, Extension, 1-3/ SCREW, Hex, Washer Head, Taptite, 3/8-16 x 3/ D 1 HOUSING, 42" FITTING, Grease SHAFT, Spindle, 7.181" Long A 2 TUBE & PLATE ASSEMBLY, Spindle WASHER, Belleville NUT, Hex 9/ A 2 BLADE, 42" Mower, 21.16" Long WASHER, Spindle Blade Powdered Metal Footnotes: HYDRO DRIVE ELECTRIC CLUTCH LT-125 SERIES 31 Manual No

32 42" Mower Deck - Belt, Idler Arm & Hitch Group Manual No HYDRO DRIVE ELECTRIC CLUTCH 32 LT-125 SERIES

33 Item Part No Qty Description A 1 GUARD, Spring CAPSCREW, Hex Washer Head, Taptite, 3/8-16 x WASHER, Plain, 13/32 x 1-1/2 x 1/ A 1 ARM SPACER, ID x 1-1/2 OD x 1.04 LG Powdered Metal CAPSCREW, Hex Head, 3/8-16 x 2-1/ WASHER, 3/ IDLER, Flat NUT, Hex, Flange Whizlock, 5/ CAPSCREW, Hex Head, 3/8-16 X 1-3/ A 1 SUPPORT, Idler NUT, Whizlock, 3/ SPRING, Extension LG Black NUT, 3/8-16, Hex Flange MAC Locking Large, Black CAPSCREW, Hex Head, 5/16-18 x V-BELT, LG A-Wedge Aramid,.44" Deep-Groove 42" Mower Deck - Belt, Idler Arm & Hitch Group Footnotes: HYDRO DRIVE ELECTRIC CLUTCH LT-125 SERIES 33 Manual No

34 42" Mower Deck - Height Adjustment & Roller Bar Group Manual No HYDRO DRIVE ELECTRIC CLUTCH 34 LT-125 SERIES

35 42" Mower Deck - Height Adjustment & Roller Bar Group Item Part No Qty Description BOLT, Rear Wheel WASHER, 1/ WHEEL, Gauge NUT, Hex, Flange Whizlock, 5/ A 1 SUPPORT, Gauge Wheel RH 7 GA NUT, Hex Flange, 3/8-16 ESNA BOLT, Carriage, 5/16-18 x 3/ D 1 SUPPORT, Mower RH D 1 SUPPORT, Mower LH A 1 SUPPORT, Gauge Wheel LH 7 GA D 1 HITCH, Front 42" Mower PIN, Hitch SPACER,.532 ID x 3/4 OD x 1-1/4 LG Yellow NUT, ESNA, Lock, 1/2-13 (Thin) CLIP, Pin, Safety A 1 HANGER, Front Mower ROD, Bail Mowers Yellow Footnotes: HYDRO DRIVE ELECTRIC CLUTCH LT-125 SERIES 35 Manual No

36 46" Mower Deck - Housing, Arbor & Blades Group Manual No HYDRO DRIVE ELECTRIC CLUTCH 36 LT-125 SERIES

37 46" Mower Deck - Housing, Arbor & Blades Group Item Part No Qty Description D 1 HOUSING, 46" Mower HOUSING, Spindle, Cast Alum Mach'd w/ftg BEARING, Ball, 20mm SHAFT, Spindle, 20mm DIA mm LG SHIELD, Arbor, 2" OD SPACER, Bearing RING, Self Locking CAPSCREW, Hex Washer Head Taptite, 5/16-18 x BLADE, Mower, 16.13" LG WASHER, Spring, ID x 1.75 OD x.156 Th CAPSCREW, Hex Head, 7/16-14 x 1, G PULLEY, Split, 4.6 OD SPACER, Lower Drive SPACER, Pulley LOCKWSHER, Spring, 7/ DEFLECTOR, Discharge A 1 PIVOT, Hinge BOLT, Carriage, Short Neck, 5/16-18 x 3/4, G NUT, Hex Flange, Whiz Lock, 5/ SPRING, Torsion, Deflector A 1 SHIELD, Hinge ROD, Deflector NUT, Push, 5/ CAPSCREW, Hex Head, 7/16-14 x 1-3/4, G A 1 BRACKET, Belt Cover, Front A 1 BRACKET, Belt Cover, Rear COVER, Belt, RH COVER, Belt, LH CAPSCREW, Hex Washer Head Taptite, 5/16-18 x 3/ A 1 BAFFLE, Pinchoff CAPSCREW, Hex Washer Head Taptite, 5/16-18 x 1-1/ CONNECTOR, Washout Port ADAPTER, Washout Port Footnotes: HYDRO DRIVE ELECTRIC CLUTCH LT-125 SERIES 37 Manual No

38 46" Mower Deck - Clutch Group Manual No HYDRO DRIVE ELECTRIC CLUTCH 38 LT-125 SERIES

39 46" Mower Deck - Clutch Group Item Part No Qty Description V-BELT, HA LG A-WEDGE ARAMID (Use on Ground Following Mower Decks) V-BELT, HA 117" (Use on Frame Hung Mower Decks) SPRING, Extension, 5-1/4" PULLEY, Idler, 46, 52" Mowers CAPSCREW, Hex Head, 3/8-16 x 2-1/2, G WASHER, 3/8 x 1 OD NUT, Hex Flange, Whiz Lock, 3/ NUT, Hex Flange, Mac Lock, Large, 3/ A 1 ARM, Idler SPACER, ID x 1.50 OD x 1.04 LG CAPSCREW, Hex Head, 3/8-16 x 2, G WASHER, 3/8 x 1-1/2 OD NUT, Center Lock, 3/8-16 Footnotes: HYDRO DRIVE ELECTRIC CLUTCH LT-125 SERIES 39 Manual No

40 46" Mower Deck - Height Adjust Group - Frame Hung Manual No HYDRO DRIVE ELECTRIC CLUTCH 40 LT-125 SERIES

41 46" Mower Deck - Height Adjust Group - Frame Hung Item Part No Qty Description A 1 SUPPORT, REAR CROSS A 1 BRKT, REAR MOWER PICKUP, TRACTOR A 1 BRKT, REAR MOWER PICKUP, TRACTOR CAPSCREW, Hex Washer Head Taptite, 5/16-18X1.00 BLK A 1 HITCH, FRONT, 46 / 52 MOWER ROD, FRONT BAIL 46,52" MWR A 1 HANGER, FRONT MOWER ROD, LATCH.500DIA 9" LG 42" BLD REG YEL RETAINER, PIN SPRING FOR.312/.375PIN BLK SPACER, 0.520ID 0.88 OD 1.185LG P MTL, YEL NUT, HEX LOCK ESNA LIGHT 1/2-13 THIN BLK A 2 BRKT, GAUGE WHEEL, RH A 2 BRKT, GAUGE WHEEL, LH BOLT, RD HD SH SQ NK 5/16-18X0.875 G5 BLK NUT, HEX FLANGE 5/16-18, WHIZ LK SM, BLK WHEEL, GAUGE BLACK POLY 5" DIA BOLT, SHLDR 3/8-16X THRD YELLOW WASHER, 0.500(0.51IDX1.00ODX.10THK) BLK NUT, HEX FLANGE 3/8-16 ESNA BLK A 1 UP STOP NUT, HEX JAM 1/2 JAM 1/2-13 NC-2B BLK CLIP, HAIR PIN.093DIA SPG WR1.625 LG BOLT, Carriage 5/16-18X.750 G5 Blk Footnotes: HYDRO DRIVE ELECTRIC CLUTCH LT-125 SERIES 41 Manual No

42 Decals Group - 42" Deck Manual No HYDRO DRIVE ELECTRIC CLUTCH 42 LT-125 SERIES

43 Decals Group - 42" Deck Item Part No Qty Description DECAL, 23HP Snapper DECAL, Snapper LH Stripe DECAL, Snapper RH Stripe DECAL, Snapper Rear DECAL, Snapper Steering Wheel DECAL, Tunnel DECAL, Trans/Tow Release Lever DECAL, Ignition Switch White/Blk DECAL, 42" Deck DECAL, Danger Blades DECAL, Danger, Do No Operate without Deflector DECAL, Mower Height Footnotes: HYDRO DRIVE ELECTRIC CLUTCH LT-125 SERIES 43 Manual No

44 Decals Group - 46" Deck Manual No HYDRO DRIVE ELECTRIC CLUTCH 44 LT-125 SERIES

45 Decals Group - 46" Deck Item Part No Qty Description DECAL, 24HP Snapper DECAL, Snapper LH Stripe DECAL, Snapper RH Stripe DECAL, Snapper Rear DECAL, Snapper Steering Wheel DECAL, Tunnel DECAL, Trans/Tow Release Lever DECAL, Ignition Switch White/Blk DECAL, Danger Blades DECAL, Danger, Do No Operate without Deflector DECAL, Decal, 46" Deck (Not Shown) Footnotes: HYDRO DRIVE ELECTRIC CLUTCH LT-125 SERIES 45 Manual No

46 Electrical Group Manual No HYDRO DRIVE ELECTRIC CLUTCH 46 LT-125 SERIES

47 Electrical Group Item Part No Qty Description SWITCH ASSEMBLY, Ignition, 6-Pole (Includes Ref. 2, 3, 4 & 5) WASHER, 5/ LOCKWASHER, Internal Tooth, 5/ NUT, Hex, Flange, 5/ COVER, Ignition KEYS, Blister Pk (KIDS+MWRS DON'T MIX) (set of two, one coated) SWITCH, Headlights, 2 Terminal PLUG, Hole, Square PLUG, Hour Meter WASHER, Plain, 1/4 (6 Total for Export) NUT, Wing, 1/ CARRIAGE BOLT, 1/4-20 x 7/ NUT, Push On HOLD DOWN, Battery SWITCH, Push Button (NC) TIE, Self Locking 7-5/ PLUG, Hole Models W/O 12V Adapter SWITCH, Push Button (NO/NC) A 1 SUPPORT, Battery 12 GA SCREW, Taptite, 5/16-18 x 5/ HEADLIGHT ASSEMBLY (Includes Ref. 24, 25, 26 & 27) SOCKET ASSEMBLY BULB, V 21CP REFLECTOR, Headlight LENS, Headlight CLIP, Wire NUT, Hex, Flange, 1/ HARNESS, Wiring CABLE, Solenoid to Starter SOLENOID SCREW, Taptite, 1/4-20 x 1/ LOCKWASHER, External Tooth, 5/ NUT, Hex, 5/16-24 NF CABLE, #6 x 10 Long, with 2 Ring Terminals, Battery to Solen NUT, Hex, Flange Whizlock, 5/ A 1 SUPPORT, RMO Switch CARRIAGE BOLT, 5/16-18 x 3/ BOOT, Insulator BATTERY SWITCH, Push Button (NO), Reverse Pedal NUT, Hex, Full, 1/ LOCKWASHER, 1/ WASHER, 1/4 I.D CABLE, Battery to Ground Footnotes: HYDRO DRIVE ELECTRIC CLUTCH LT-125 SERIES 47 Manual No

48 Electrical Group Manual No HYDRO DRIVE ELECTRIC CLUTCH 48 LT-125 SERIES

49 Electrical Group Item Part No Qty Description CAPSCREW, Hex Head, 1/4-20 x 3/ FUSE, Wiring Harness SWITCH, RMO Module Only KEY, RMO Module Plastic SWITCH, PTO, Push/Pull Symbols Footnotes: HYDRO DRIVE ELECTRIC CLUTCH LT-125 SERIES 49 Manual No

50

51

52 Parts Manual for HYDRO DRIVE ELECTRIC CLUTCH 42" & 46" LAWN TRACTOR LT-125 SERIES IT IS THE POLICY OF BRIGGS & STRATTON CORP TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS Briggs & Stratton Yard Power Products Group 535 Macon Road McDonough, GA, U.S.A Copyright 2012 Briggs & Stratton Corporation Milwaukee, WI USA. All Rights Reserved Manual No Revision: B 10/30/2012