Mfg. No: SRS Z1 Series w/ 48" Rear Discharge

Size: px

Start display at page:

Download "Mfg. No: SRS Z1 Series w/ 48" Rear Discharge"

Charles Alexander
5 years ago
Views:

3 Model Components Table Of Contents Page 48" Mower Deck - Housing, Covers, Spindles & Blades (Rear Discharge) " Mower Deck - Pulleys, Belt, & Idler Arm " Mower Deck - Rollers CE Guarding - Deck Lift & Front End CE Guarding - Engine Muffler Guard CE Guarding - Transaxles Decal Group - Brand & Model Decal Group - Safety & Operation Export Models Deck Lift Group Electrical Group Electrical Schematic - Charging Circuit S/N: & Below Electrical Schematic - Charging Circuit S/N: & Above Electrical Schematic - Cranking Circuit S/N: & Below Electrical Schematic - Cranking Circuit S/N: & Above Electrical Schematic - Ignition Grounding Circuit S/N: & Below Electrical Schematic - Ignition Grounding Circuit S/N: & Above Electrical Schematic - PTO Op. Pres. Circuit S/N: & Below Electrical Schematic - PTO Op. Pres. Circuit S/N: & Above Engine & PTO Group Fuel Tank & Mount, Fuel Supply, and Evap Group Hydraulic Group Instrument Control Panel Group Main Frame & Front Casters Group Motion Control Group Neutral Lockout Group Operator Compartment Group S/N & Below Operator Compartment Group S/N & Above Parking Brake Group Spindle Service Parts Transaxle Drive Group Transaxle SERVICE Parts - Hydro-Gear ZT Wheel & Tire Group Torque Specification Chart Copyright Briggs and Stratton. All Rights reserved 3 20-Sep-2018

4 48" Mower Deck - Housing, Covers, Spindles & Blades (Rear Discharge) Note: Unless noted otherwise, use the standard torque specifications Mfg. No: Copyright Briggs and Stratton. All Rights reserved 4 20-Sep-2018

5 48" Mower Deck - Housing, Covers, Spindles & Blades (Rear Discharge) REF NO PART NO QTY DESCRIPTION DECK SHELL W/DECALS, Z148RDCE ( B) A 1 PLATE, SUPPORT, CE - BLK S 1 BLADE SET, 48 DECK -(SET OF 3 BLADES) ASSM, SPINDLE, LONG SHAFT BODY CLIP, 5/ GA MATERIAL X10 12 BOLT, 3/8-16 X 1-1/4, FLANGE, GD 5, CZ WASHER, BLADE BOLT, 9/16" F436, CZ X14 3 BOLT, 5/8-11 X 1-3/4 GD WASHER, 5/16 F436 FLAT X6 6 BOLT, 5/16-18 X 3/4 GD NUT, 3/8-16 HEX NYLOCK FLANGE B 1 PLATE, DECK GUARD, 48CE - RED B 1 GUARD, MOWER DECK, RH - RED B 1 GUARD, MOWER DECK, LH - RED CA 3 SCREW-HEX WSHR HD TAPTT5/16-18X A 1 WELD, REAR BAFFLE, 48RD SHORT - BLK B 1 BAFFLE, FRONT DISHARGE, LH, 48RD - RED B 1 BAFFLE, FRONT DISHARGE, RH, 48RD - RED B 2 PLATE, SPINDLE GUARD, LH TOP, 48CE - RED RHSSNB,5/16-18 X 3/4 GR5 ZINC/CLEAR /16 PUSH-ON NUT RETAINER, STL, CZ NUT, 5/16-18 HEX NYLOCK FLANGE PLUG, PANEL, BLACK B 2 PLATE, SPINDLE GUARD, RH TOP, 48CE - RED X6 13 BOLT, 5/16-18 X 3/4, CARRIAGE, GD5, CZ FLAP, REAR DISCHARGE, UPPER FLAP, REAR DISCHARGE, LOWER WASHER, 5/16 FENDER X8 4 BOLT, 5/16-18 X 1, CARRIAGE, GD5, CZ Copyright Briggs and Stratton. All Rights reserved 5 20-Sep-2018

7 48" Mower Deck - Pulleys, Belt, & Idler Arm REF NO PART NO QTY DESCRIPTION PULLEY, FLAT IDLER, 6-3/4" PULLEY, B-SEC, 5.426OB, SPECIAL HUB SPACER,.52 X 1.75 X 2.25, CZ SPACER, IDLER ARM, 1/2, PM BEARING, BALL, AXLE SPACER,.52 X.84 X 1.53, PM A 1 WELD, IDLER ARM, MOWER DECK - BLK USE PULLEY SHIELD SHIELD, PULLEY BEARING, CZ NUT, 1/2-13 HEX NYLOCK FLANGE WASHER, 1/2 SAE WASHER, 3/4 BELLEVILLE CL/ZC NUT, 3/4-16 Hex SPACER,.39 X.75 X.38, PM, CZ WASHER, 3/8" Fender NUT, 3/8-16 HEX NYLOCK FLANGE -(Qty: 2 - S/N: & Below) WASHER, 3/8 SAE X16 1 BOLT, 3/8-16 X 2, GD5, CZ SPACER,.39 X 1.00 X.50, PM, CZ X20 1 BOLT, 1/2-13 X 2-1/2" GD5 CZ X32 1 BOLT, 1/2-13 X 4" GD5 CZ NUT, 3/8-16 Hex Large Serrated Flange -(S/N: & Below) SPRING, DECK, SRSZ EYE BOLT, 3/8-16 X 6, 3THRD, 1EYE, CZ -(S/N: & Below) SPACER,.52 X 1.00 X.63, YZ X28 1 BOLT, 1/2-13 X 3-1/2, HEX HD, GD5, CZ (SV) BELT, B-SEC, , ARAMID, WRAPED X10 3 KEY, 1/4" SQ. X 1-1/ SPRING PULLER, 1/2-20, (S/N: & Above) NUT, 1/2-20 Hex Jam -(S/N: & Above) WASHER, 1/2 SAE -(S/N: & Above) NUT, Hex, Nylon Lock, 1/2-20 -(S/N: & Above) Copyright Briggs and Stratton. All Rights reserved 7 20-Sep-2018

9 48" Mower Deck - Rollers REF NO PART NO QTY DESCRIPTION WHEEL WIDE 3.88 DIA 0.531ID POLY BOLT-WHEEL 3/8-16X THRD WASHER,.516IDX.875ODX.06,FLAT,ZC/CL NUT, 3/8-16 HEX SIDE LOCK X28 2 BOLT, 3/8-16 X 3-1/2" GD5 CZ -(USA Models Only) SPACER,.51 X.75 X.56, PM, CZ -(USA Models Only) SPACER,.38 X.50 X 2.50, CZ -(USA Models Only) NUT, 3/8-16 HEX NYLOCK FLANGE -(USA Models Only) WASHER, 3/8 SAE -(USA Models Only) WHEEL WIDE 3.88 DIA 0.531ID POLY -(USA Models Only) Copyright Briggs and Stratton. All Rights reserved 9 20-Sep-2018

11 CE Guarding - Deck Lift & Front End REF NO PART NO QTY DESCRIPTION B 1 PLATE, FAN GUARD, SRSZ1 CE - RED X6 2 BOLT, 1/4-20 X 3/4 GD5 CZ WASHER, 1/4 SAE NUT, 1/4-20 HEX NYLOCK FLANGE X10 6 BOLT, 3/8-16 X 1-1/4" GD5 CZ WASHER, 3/8 SAE NUT, 3/8-16 HEX NYLOCK FLANGE CLAMP, VINYL INSULATED, A 2 BRACKET, INNER TRUNION, CE - BLK X12 4 BOLT, 3/8-16 X 1-1/2" GD5 CZ A 1 PLATE, PIVOT GUARD, 36 CE - BLK -(36" Mower Decks Only) B 1 PLATE, DECK GUARD, UPPER 36 CE - RED -(36" Mower Decks Only) B 1 PLATE, FRAME GUARD, RH - RED -(36" Mower Decks Only) B 1 PLATE, FRAME GUARD, LH - RED -(36" Mower Decks Only) X24 4 BOLT, 3/8-16 X 3" GD5 CZ B 1 PLATE, ENGINE GUARD, SRSZ1 CE - RED X6 4 BOLT, 5/16-18 X 3/4 GD5 -(48" Mower Decks Only) WASHER, 5/16" SAE -(48" Mower Decks Only) NUT, 5/16-18 HEX NYLOCK FLANGE -(48" Mower Decks Only) B 1 PLATE, DECK GUARD, UPPER, 48 CE - RED -(48" Mower Decks Only) B 1 PLATE, FRAME GUARD, LOWER, RH - RED -(48" Mower Decks Only) B 1 PLATE, FRAME GUARD, LOWER, LH - RED -(48" Mower Decks Only) Copyright Briggs and Stratton. All Rights reserved Sep-2018

13 CE Guarding - Engine Muffler Guard REF NO PART NO QTY DESCRIPTION B 2 PLATE, MUFFLER TAB, CE - RED NUT, 5/16-18 HEX SERRATED FLANGE (SMALL) B 1 WELD, MUFFLER GUARD, CE - RED -(S/N: & Below) B 1 WELD, MUFFLER GUARD, CE - RED -(S/N: & Above) WASHER, 5/16" SAE X6 4 BOLT, 5/16-18 X 3/4 GD BODY CLIP, 5/ GA. MATERIAL B 1 PLATE, FRONT GUARD, SRSZ1 CE - RED -(S/N: & Below) B 1 PLATE, FRONT GUARD, SRSZ1 CE - RED -(S/N: & Above) Copyright Briggs and Stratton. All Rights reserved Sep-2018

15 CE Guarding - Transaxles REF NO PART NO QTY DESCRIPTION SPACER,.39 X 1.00 X.75, CZ BODY CLIP, 5/ GA MATERIAL X8 2 BOLT, 5/16-18 X 1 GD5 CZ A 1 PLATE, PLATFORM GUARD, REAR, CE - BLK A 1 PLATE, PLATFORM GUARD, FRONT, CE - BLK A 1 PLATE, MOUNT, PLATFORM GUARD - BLK A 1 PLATE, DEFLECTOR, LH, 36CE - BLK -(36" Mower Decks Only) A 1 PLATE, DEFLECTOR, RH, 36CE - BLK -(36" Mower Decks Only) WASHER, 5/16" SAE X6 7 BOLT, 5/16-18 X 3/4 GD NUT, 5/16-18 HEX NYLOCK FLANGE X12 2 BOLT, 5/16-18 X 1-1/2 GD5 CZ BUMPER, RUBBER X10 2 BOLT, 3/8-16 X 1-1/4" GD5 CZ WASHER, 3/8 SAE NUT, 3/8-16 HEX NYLOCK FLANGE X20 2 BOLT, 3/8-16 X 2-1/2" GD5 CZ WASHER, 3/8 SAE NUT, 3/8-16 HEX NYLOCK FLANGE A 1 PLATE, DEFLECTOR, LH, 48CE - BLK -(48" Mower Decks Only) A 1 PLATE, DEFLECTOR, RH, 48CE - BLK -(48" Mower Decks Only) Copyright Briggs and Stratton. All Rights reserved Sep-2018

17 Decal Group - Brand & Model REF NO PART NO QTY DESCRIPTION DECAL, 36 -(Models with 36" Mower Decks) DECAL, 48 -(Models with 48" Mower Decks) DECAL, ICD CUTTING SYSTEM -(Models with 48" Mower Decks) DECAL, FENDER, SRSZ1 / Z2, LH DECAL, FERRIS LOGO, SMALL DECAL, FERRIS, X DECAL, MODEL, Z DECAL, FENDER, SRSZ1 / Z2, RH Copyright Briggs and Stratton. All Rights reserved Sep-2018

Decal Group - Safety & Operation Export Models Note: Unless noted otherwise, use the standard

19 Decal Group - Safety & Operation Export Models REF NO PART NO QTY DESCRIPTION DECAL, CUT HEIGHT, SRS Z DECAL, DASH PANEL, LH, CONTROLS DECAL, DASH PANEL, RH, WRNGS/CNTRLS, CE DECAL, WARNINGS, OPER COMPARTMENT, CE DECAL, CE DANGER, HAND IN BELT DECAL, HYDRAULIC OIL, 20W-50, 1" X 1.44" DECAL, TRANSAXLE RELEASE, WB DECAL, FIRE ANSI EXPORT DECAL, DISCHARGE SAFETY, EXPORT DECAL, Pinch Point, CE DECAL, BELT ROUTING, SRS-36 -(36" Models) DECAL, BELT ROUTING, SRS (48" Models) Copyright Briggs and Stratton. All Rights reserved Sep-2018

21 Deck Lift Group REF NO PART NO QTY DESCRIPTION SPACER,.52 X 1.00 X SS ROLLER, DECK HEIGHT WASHER, FRICTION BUSHING, FLANGE -Qty: 2 - Models w/ 48" Mower Decks ADJUSTER, DECK LIFT, CZ PIVOT, DECK LIFT TRUNION, GREASABLE PIVOT BLOCK, PLASTIC A 4 BRACKET, OUTER TRUNION MNT - BLK A 4 BRACKET, INNER TRUNION MNT - BLK A 1 WELD, DECK LIFT SHAFT, SRSZ1 - BLK ROD, DECK LIFT TIMING, SRSZ ROD, MAIN DECK LIFT, SRSZ1 -(Models w/ 36" Mower Decks) BALL JOINT, 1/2-20, RH, MALE, METAL RACE A 1 WELD, REAR LIFT PIVOT, LH - BLK -(Models w/ 36" Mower Decks) A 1 WELD, REAR LIFT PIVOT, RH - BLK A 2 PLATE, PIVOT BLOCK SUPPORT - BLK A 1 WELD, DECK LIFT, STAND ON - BLK BUSHING, 1.00 X 1.13 X 1.38, PLASTIC -Qty: 6 - Models with 48" Mower Decks A 1 PLATE, LATCH GUIDE - BLK A 1 PLATE, LATCH, PUSH BUTTON LIFT - BLK SPACER,.50 X.75 X.66, CZ PIN, HITCH, 3/8" DIA X 2.5" EL, CZ WASHER,.515 X 1.00 X.25", CZ B 1 PLATE, BRACKET, DECK LIFT SUPPORT - RED CLEVIS, 1/2-20, STEEL, CLEAR ZINC ROD, DECK LIFT LATCH -(S/N: & Above) SPRING-COMP 0.715ODX LG BUTTON, PUSH, DECK LIFT, THREADED -(S/N: & Above) GRIP,LIFT LEVER WASHER,.390 X 1.50 X.109, CZ BOLT, 3/8-16 X 3/4, PLT W/PATCH WASHER, 1/2 SAE X12 1 BOLT, 1/2-13 X 1-1/2 GD5 CZ NUT, 1/2-13 HEX NYLOCK FLANGE GREASE FITTING, 1/4-28 STRAIGHT GREASE FITTING, 1/4-28, 90 DEGREE WASHER, 1/4 SAE X6 4 BOLT, 1/4-20 X 3/4 GD5 CZ NUT, 1/4-20 HEX NYLOCK FLANGE WASHER, 5/16" SAE X8 2 BOLT, 5/16-18 X 1 GD5 CZ NUT, 5/16-18 HEX NYLOCK FLANGE WASHER, 3/8 SAE X22 4 BOLT, 3/8-16 X 2-3/4" GD5 CZ X12 8 BOLT, 3/8-16 X 1-1/2" GD5 CZ NUT, 3/8-16 HEX NYLOCK FLANGE X12 1 PIN, CLEVIS, 1/2 X 1-1/2, CL/ZC Copyright Briggs and Stratton. All Rights reserved Sep-2018

23 Deck Lift Group REF NO PART NO QTY DESCRIPTION X10 6 PIN, COTTER, 1/8 X 1-1/ WASHER, 5/8 SAE WASHER, 1/2 USS X26 2 BOLT, 1/2-13 X 3-1/4, HEX HD, GD5, CZ (SV) X14 4 BOLT, 1/2-13 X 1-3/4 GD5 CZ NUT, 1/2-20 HEX JAM X20 2 BOLT, 5/16-18 X 2-1/2 GD5 TFL, CZ X16 2 BOLT, 3/8-16 X 2, GD5, CZ SPACER,3/8X3/4X15/ CLEVIS, 5/16-18, 3/8 PIN HOLE, CLR ZINC X9 2 PIN, CLEVIS, 3/8 X 1-1/8, PLATED PIN, 3/32 X.750, COT, ZINC/CLEAR NUT, 5/16-18 HEX JAM SPRING-EXTN 1.12 ODX LG.177 ECOAT SPACER, 1.02 X 1.56 X A 1 WELD, REAR LIFT PIVOT, LH - BLK -(Models w/ 48" Mower Decks) ROD, MAIN DECK LIFT, (Models w/ 48" Mower Decks) KIT, RELEASE BUTTON AND ROD & Below) For-(S/N: Not Copyright Briggs and Stratton. All Rights reserved Sep-2018

25 Electrical Group REF NO PART NO QTY DESCRIPTION BATTERY BOX, W/ DRAIN HOLE STRAP, RUBBER B 1 WELD, BATTERY MNT, SRSZ1 - RED BATTERY, WET ( BCIU1, 340 CCA) WIRE HARNESS, SRS CONSOLIDATED -(S/N: & Below) HARNESS, Wiring, Stand-On ZTR -(S/N: & Above) SWITCH, SEAT -(S/N: & Below) SWITCH, Push Button, NO, Black -(S/N: & Above) MODULE, TIME DELAY, NO DIODE WIRE HARNESS, JUMPER, KAWI -(Models w/ Kawi Engines) SWITCH, PLUNGER, NO, SINGLE POLE, SNAP-IN ROSEBUD LOOM CLIP BATTERY CABLE, NEG, 22, 1/4-5/ BATTERY CABLE, POS, 22, 1/4-5/ WASHER, 1/4 SAE X6 4 BOLT, 1/4"-20 X 3/4" GD5 YZ HHCS, 1/4-20 X 0.625, GR5, ZINC/CLEAR NUT, 1/4-20 Hex Nylock Flange NUT, Hex, Serrated Flange, 1/ MACHINE SCREW, Truss Head #10-24 x X6 2 SCREW, #10-24 X 3/4" ROUND PHILLIPS NUT, Hex, Nylon Lock, # WASHER, 3/8 SAE X8 2 BOLT, 3/8-16 X 1" GD5 CZ NUT, 3/8-16 HEX NYLOCK FLANGE X19 1 WIRE LOOM, 3/8 ID X 19 IN A 1 PLATE, WIRE GUIDE / TDM MOUNT - BLK Refer to: Parking Brake Group Refer to: Operator Compartment Group CLAMP, VINYL INSULATED, TIE, SELF-LOCKING, 12" FIR TREE MOUNT, PACKARD -(Not illustrated) Copyright Briggs and Stratton. All Rights reserved Sep-2018

29 Electrical Schematic - Charging Circuit S/N: & Above REF NO PART NO QTY DESCRIPTION HARNESS, Wiring, Stand-On ZTR WIRE HARNESS, JUMPER, KAWI Copyright Briggs and Stratton. All Rights reserved Sep-2018

33 Electrical Schematic - Cranking Circuit S/N: & Above REF NO PART NO QTY DESCRIPTION HARNESS, Wiring, Stand-On ZTR WIRE HARNESS, JUMPER, KAWI Copyright Briggs and Stratton. All Rights reserved Sep-2018

34 Electrical Schematic - Ignition Grounding Circuit S/N: & Below Note: Unless noted otherwise, use the standard torque specifications Mfg. No: Copyright Briggs and Stratton. All Rights reserved Sep-2018

36 Electrical Schematic - Ignition Grounding Circuit S/N: & Above Note: Unless noted otherwise, use the standard torque specifications Mfg. No: Copyright Briggs and Stratton. All Rights reserved Sep-2018

37 Electrical Schematic - Ignition Grounding Circuit S/N: & Above REF NO PART NO QTY DESCRIPTION HARNESS, Wiring, Stand-On ZTR WIRE HARNESS, JUMPER, KAWI Copyright Briggs and Stratton. All Rights reserved Sep-2018

41 Electrical Schematic - PTO Op. Pres. Circuit S/N: & Above REF NO PART NO QTY DESCRIPTION HARNESS, Wiring, Stand-On ZTR WIRE HARNESS, JUMPER, KAWI Copyright Briggs and Stratton. All Rights reserved Sep-2018

43 Engine & PTO Group REF NO PART NO QTY DESCRIPTION ENGINE, 19HP, KAWASAKI, FX600V -(Models w/ Kawi FX600V Engine) BOLT, CRANKSHAFT, 7/16 X 2-3/4, PATCH, CZ -(Models w/ Kawi Engines) CLUTCH, WARNER, 125 FTLBS " MUFFLER, 15-19HP KAWI, CATALYTIC COMBUST -(Models w/ Kawi FX600V Engine - S/N: & Below) MUFFLER 15-19HP KAWI -(Models w/ Kawi FX600V Engine - S/N: & Above) CLAMP, VINYL INSULATED, X10 1 KEY, 1/4" SQ. X 1-1/ PULLEY, CRANKSHAFT, ID X 4.00 OD -(Models w/ Kawi Engines) HOSE, OIL DRAIN TIE, SELF-LOCKING, 24" -(Qty: 2 - Models w/ B&S Engines) BELLEVILLE WASHER, X.442 X NUT, 5/16-18 HEX SERRATED FLANGE (LARGE) -(S/N: & Below) NUT, 5/16-18 HEX NYLOCK FLANGE NUT X22 1 BOLT, 5/16-18 X 2-3/4, GD 5, YZ -(S/N: & Below) GROMMET, 7/8"ID, 1/4" THICK STK BOLT, M X 16MM GD8.8 -(Models w/ Kawi Engines) NUT, M Hex Serrated Flange -(Models w/ Kawi Engines) BOLT, HEX FLG, SER, GD5 3/8-16 X 1-1/4" PACH CZ -(Models w/ Kawi Engines) ADAPTER, Oil Drain -(Models w/ Kawi Engines) WASHER, 3/8 SAE -(S/N: & Below) X10 2 BOLT, 3/8-16 X 1-1/4" GD5 CZ -(S/N: & Below) NUT, 3/8-16 HEX NYLOCK FLANGE -(S/N: & Below) WASHER, 1/4 SAE X6 1 BOLT, 1/4"-20 X 3/4" GD5 YZ NUT, 1/4-20 Hex Nylock Flange A 1 WELD, EXHAUST SUPPORT BRACKET - BLK -(S/N: & Below) NUT, 5/16-1/8, HEX, CNTR LK, ZINC PHOS/OIL -(S/N: & Below) WASHER, 5/16" SAE -(Kawasaki Models - S/N: & Below) WASHER, 5/16" SAE -(Briggs & Stratton Models - S/N: & Below) WASHER, 5/16" SAE -(Briggs & Stratton Models - S/N: & Above) X6 2 BOLT, 5/16-18 X 3/4 GD ENGINE, 22HP, KAWASAKI, FX691V -(Models w/ Kawi FX691V Engine) MUFFLER, HOR, KAWASAKI, WALK BEHINDS -(Models w/ Kawi FX691V Engine - S/N: & Below) MUFFLER 22 HP KAWI CATALYTIC COMBUSTION -(Models w/ Kawi FX691V Engine - S/N: & Above) ENGINE, 23HP, BRIGGS VANGUARD -(Models w/ B&S Engines) Copyright Briggs and Stratton. All Rights reserved Sep-2018

45 Engine & PTO Group REF NO PART NO QTY DESCRIPTION MUFFLER, 23HP BRIGGS VANGUARD, SRSZ1 -(Models w/ B&S Engines - S/N: & Below) MUFFLER 23HP VANGUARD SRSZ1 (SHORT) -(Models w/ B&S Engines - S/N: & Above) SPACER, 1.50 X X.50, CZ -(Models w/ B&S Engines) PULLEY,CRANKSHAFT,1.1255IDX4.00OD,BRIGGS -(Models w/ B&S Engines) BOLT, CRANKSHAFT, 7/16-20 X 3, GD8 -(Models w/ B&S Engines) X14 4 BOLT, 5/16-24 X 1-3/4, GD8, PHOS -(Models w/ B&S Engines) NUT, 5/16-24, TOP LOCK FLANGE, GD8 PHOS -(Models w/ B&S Engines) WASHER, 5/16" Internal Tooth Lock -(Models w/ B&S Engines) X8 1 BOLT, 5/16-18 X 1" GRD5 YZ -(S/N: & Above) WASHER, 5/16" SAE -(S/N: & Above) A 1 PLATE, CLUTCH ANCHOR, Z1 - BLK -(S/N: & Above) PLATE, SS HEAT SHIELD, Z1-BRIGGS -(Models w/ B&S Engines) Copyright Briggs and Stratton. All Rights reserved Sep-2018

47 Fuel Tank & Mount, Fuel Supply, and Evap Group REF NO PART NO QTY DESCRIPTION FUEL CAP, 3.25", MANAGED VENT, 16"TETHER X12 2 BOLT, 1/4-20 X 1-1/2 GD5 CZ NUT, 1/4-20 HEX NYLOCK FLANGE WASHER, 1/4 SAE A 1 PLATE, TANK MOUNT, SRSZ1 - BLK X8 4 BOLT, 5/16-18 X 1 GD5 CZ WASHER, 5/16" SAE BODY CLIP, 5/ GA MATERIAL FUEL TANK, SRSZ1, 6 GAL A 1 STRAP, FUEL TANK, SRSZ1 - BLK X4 2 SCREW, SOC HD, 5/16-18 X 1/2, BLK FITTING, 3/16" TEE, BARB TYPE, HDPE FILTER, FUEL X2 1 HOSE, VAPOR, 5MM ID, 2.00 LG X22 1 HOSE, VAPOR, 5MM ID, LG -(Kawasaki Engines) X25 1 HOSE, VAPOR, 5MM ID, LG -(Briggs & Stratton Engines) X14 1 HOSE, VAPOR, 5MM ID, LG -(Kawasaki Engines) TIE,SELF-LOCKING, 6" -(Qty: 1 - Briggs & Stratton Engines) GROMMET -(SV) REMOTE VENT ASSY, NO VALVE -(SV) X1 1 GROMMET, FUEL GAUGE -(SV) GAUGE, FUEL LEVEL, 18.50" -(SV) ASM, PICKUP TUBE, FUEL TANK, 18.00" -(SV) X15P5 1 HOSE, 1/4" FUEL, 15.50" CLAMP, HOSE, EXTERNAL, 1/2 - RED Copyright Briggs and Stratton. All Rights reserved Sep-2018

49 Hydraulic Group REF NO PART NO QTY DESCRIPTION TRANSAXLE, ZT3400, LH, ZU-KMEF-3L7C-1SXE TRANSAXLE, ZT3400, RH, ZU-GMEF-3L7B-1SXE RESERVOIR, HYDRO OIL, 350 ML FITTING, 45 ELBOW, 1/2" HOSE TO 9/16 O R CLAMP, HOSE,.75 FREE DIA ROD, HYDRO RELEASE, STAND ON X26 1 HOSE, 1/2" PUSH-ON, 26.00" X24 4 BOLT, 5/16-18 X 3" GD5 YZ X20 2 BOLT, 3/8-16 X 2-1/2" GD5 CZ RHSSNB, 3/8-16 X 2-1/4, GR NUT, 5/16-18 HEX NYLOCK FLANGE NUT X8 2 BOLT, 1/4-20 X 1" GD5 CZ WASHER, 1/4 SAE NUT, 1/4-20 Hex Nylock Flange WASHER, 3/8 SAE NUT, 3/8-16 HEX NYLOCK FLANGE COLLAR, 5/16" Set COLLAR, Set, 1/4" WASHER, 5/16" SAE X33 1 HOSE, 1/2" PUSH-ON, 33.00" X6 2 BOLT, 5/16-18 X 3/4 GD X8 1 LOOM, CONVOLUTED SPLIT, 1" ID - 8" LONG X16 1 LOOM, CONVOLUTED SPLIT, 1" ID - 16" LONG B 1 PLATE, HYDRO BOTTLE MOUNT, SRS Z1 - RED A 1 PLATE, HOSE GUIDE CLAMP, VINYL INSULATED, HHCS, 1/4-20 X 0.625, GR5, ZINC/CLEAR NUT, Hex, Side Locking, 1/4-20 Copyright Briggs and Stratton. All Rights reserved Sep-2018

51 Instrument Control Panel Group REF NO PART NO QTY DESCRIPTION BODY CLIP, 1/4-20 X 1/2" DEEP X6 4 BOLT, 1/4-20 X 3/4, ALLEN BUTTON HD, YZ HOUR METER, ASSEMBLE -(*See Footnote) X4 2 SCREW, #10-24 X 1/2" ROUND PHILLIPS -(USA Models Only) X6 2 SCREW, #10-24 X 3/4" ROUND PHILLIPS -(CE Models Only) NUT, Hex, Nylon Lock, # NUT, 3/8-24 Hex Jam WASHER, 3/8" SPLIT LOCK CABLE, CHOKE CONTROL, 43.5" CABLE, THROTTLE, 40" PTO SWITCH, MOMENTARY, SMALL KNOB DASH PANEL, W/DECALS, SRS Z1 USA -( A)(For USA Models) DASH PANEL, W/DECALS, SRS Z1, EXP -( A)(For Export Models) RING, SWITCH RETAINER SWITCH, IGNITION, 6 POST LEVER, HEAVY DUTY, THROTTLE CONTROL X1 1 THROTTLE CONTROL HANDLE/KNOB KEY, IGNITION MOLDED SET COVER, PLASTIC, SNAP ON PLASTIC NUT PLATE, Throttle Stop ( ) -(CE Models Only) Footnotes: * When replacing this hour meter, please call our Service Department at ext. 709 Copyright Briggs and Stratton. All Rights reserved Sep-2018

53 Main Frame & Front Casters Group REF NO PART NO QTY DESCRIPTION FRAME -(Refer to Note: *) BEARING, TAPERED ROLLER, 1" SEAL, Grease NUT, 3/4-16, HEX JAM NYLON LOCK CAP, LOW PROFILE, STEEL WASHER, BELLEVILLE X B 2 WELD, CASTER YOKE - RED B 1 WELD, CONTROL TOWER, SRSZ1 - RED A 1 WELD, CENTER CROSS BRACE, SRSZ1 - BLK PAD, FRICTION,.375 X 1.25 X NUT, 5/16-18 HEX NYLOCK FLANGE NUT SCREW, 5/16-18 X 1, PHILLIPS HD, BZ WASHER, 3/8 SAE X10 3 BOLT, 3/8-16 X 1-1/4" GD5 CZ NUT, 3/8-16 HEX NYLOCK FLANGE GAUGE WHEEL (S/N: & Below) WHEEL, ANTI SCALP, 5" -(S/N: & Above) X36 2 BOLT, 3/8-16 X 4-1/2" GD5 CZ SPACER,.64 X 1.13 X.63, CZ -(S/N: & Below) SPACER,.38 X.63 X 3.25, YZ -(S/N: & Below) SPACER,.38 X.63 X 3.38, CZ -(S/N: & Above) BOLT, 1/4-28 X 1/2, GD5 YZ X8 4 BOLT, 3/8-16 X 1" GD5 CZ B 1 PLATE, HEAT SHIELD, SRSZ1 - RED X6 2 BOLT, 5/16-18 X 3/4, CARRIAGE, GD5, CZ B 1 WELD, FRONT FRAME GUARD, SRSZ1 - RED WASHER, 5/16" SAE X6 4 BOLT, 5/16-18 X 3/4 GD BODY CLIP, 5/ GA. MATERIAL X12 1 BOLT, 3/8-16 X 1-1/2" GD5 CZ NUT, Hex, Side Lock, 3/ NUT, 3/8-16 Hex Large Serrated Flange /16" PUSH-ON NUT RETAINER, STL, CZ CUP, BEARING (SV) -(Service Part for frame) Footnotes: Note: *If frame is damaged, call ext. 709 Copyright Briggs and Stratton. All Rights reserved Sep-2018

55 Motion Control Group REF NO PART NO QTY DESCRIPTION NUT, 3/8-16 HEX NYLON LOCK NUT, 3/8-16 HEX NYLOCK FLANGE WASHER, 3/8 SAE A 1 WELD, REAR HANDLE, SRSZ1 - BLK A 1 WELD, FRONT HANDLE, SRSZ1 - BLK PULL PIN, 3/8" DIA X 9/16" STROKE BEARING-FLANGE, 5/ A 1 WELD, CONTROL HANDLE, SRSZ1 RH - BLK A 1 WELD, CONTROL HANDLE, SRSZ1 LH - BLK A 1 PLATE, SPEED ADJUSTMENT, SRS - BLK X8 7 BOLT, 3/8-16 X 1" GD5 CZ X10 1 BOLT, 3/8-16 X 1-1/4" GD5 CZ WASHER, 5/16" SAE X8 3 BOLT, 5/16-18 X 1 GD5 CZ NUT, 5/16-18, HEX, CNTR LK,ZINC PHOS/OIL SPACER,.38 X.50 X.27, CZ BALL JOINT 5/16-24 LH FEMALE W/STUD, BR GRIP, FOAM,.475 X 7.75 X ROD, 5/16-24 X 4.25, CZ BALL JOINT 5/16-24 RH FEMALE BRONZE RACE NUT, 5/16-24 HEX NUT, 5/16-24 HEX, LH NUT, 5/16-24 HEX NYLON LOCK ROD, MOTION CONTROL, STAND-ON X6 2 BOLT, 7/16-14 X 3/4, GD 5 CZ A 2 PLATE, CONTROL MOUNT - BLK BALL JOINT 5/16-24 LH FEMALE BRONZE RACE NUT, 7/16-14 HEX TOP LOCK NUT, 5/16-18 HEX SERRATED FLANGE (SMALL) X10 3 BOLT, 5/16-18 X 1-1/4 GD5 CZ NUT, 5/16-18 HEX NYLOCK FLANGE SPACER,.33 X.50 X.25, PM, CZ X6 4 BOLT, 3/8-16 X 3/4" GD5 CZ BEARING, BRONZE, FLANGED, 5/8", FLB X12 2 SCREW, SOC HD, 5/16-18 X 1-1/2, BLK NUT, 5/16-18 HEX NYLON LOCK Copyright Briggs and Stratton. All Rights reserved Sep-2018

57 Neutral Lockout Group REF NO PART NO QTY DESCRIPTION A 1 WELD, NEUTRAL LOCK SHAFT, SRSZ1 - BLK BEARING, 1/2 FLANGED, PLASTIC BALL X14 2 BOLT, 5/16-18 X 1-3/4 GD5 CZ NUT, 5/16-18 HEX SERRATED FLANGE (SMALL) X6 4 BOLT, 1/4-20 X 3/4 GD5 CZ WASHER, 1/4 SAE NUT, 1/4-20 HEX NYLOCK FLANGE SEE PARKING BRAKE GROUP X8 1 PIN, CLEVIS, 5/16 X 1, PLATED PIN, HAIR,.0585 X 1-1/8, 1/4 EYE, CZ ROD, 5/16-24 X 3.25, CZ CLEVIS, 5/16-24, STEEL, CLEAR ZINC NUT, 5/16-24 HEX NUT, 5/16-24 HEX, LH X10 1 BOLT, 5/16-18 X 1-1/4 GD5 CZ BALL JOINT 5/16-24 LH FEMALE BRONZE RACE WASHER, 5/16 USS NUT, 5/16-18 HEX NYLOCK FLANGE Copyright Briggs and Stratton. All Rights reserved Sep-2018

59 Operator Compartment Group S/N & Below REF NO PART NO QTY DESCRIPTION A 1 PLATE, OPC, STAND ON - BLK A 1 PLATE, OPC LINK, STAND ON - BLK A 1 WELD, PLATFORM, SRSZ1 - BLK A 1 WELD, SUSPENSION LINK - BLK B 1 PLATE, PAD MOUNT, SRSZ1 - RED SPACER,.52 X.74 X 1.50, CZ SPACER,.328 X 1.0 X.85, CZ SPACER,.33 X.63 X.25, CZ SHOCK / SPRING ASSEMBLY SPACER, STEP,.39 X 1.00 X.69, CZ BUMPER, RUBBER KNEE PAD, SRS Z1, STAND ON WASHER, 5/16" Fender SPACER,.52 X 1.00 X.22, PM, CZ BEARING, FLANGE BEARING-FLANGE, 5/ X10 4 BOLT, 3/8-16 X 1-1/4" GD5 CZ X18 2 BOLT, 1/2-13 X 2-1/4" GD5 CZ NUT, 1/2-13 Hex Side Lock WASHER, 5/16" SAE X6 2 BOLT, 5/16-18 X 3/4 GD WASHER, 3/8" Fender X44 1 BOLT, 3/8-16 X 5-1/2" GD5 CZ NUT, 3/8-16 HEX NYLOCK FLANGE WASHER, 3/8 SAE X16 1 PIN, CLEVIS, 3/8 X 2, PLATED NUT, 1/2-20 Hex Jam JOINT-BALL THD.500ID, CLR ZINC ROD, THREADED, 1/2-20 X X16 1 BOLT, 1/2-13 X 2" GD5 CZ X8 10 BOLT, 5/16-18 X 1" GRD5 YZ NUT, 5/16-1/8, HEX, CNTR LK, ZINC PHOS/OIL BUMPER, RUBBER, 1/ NUT, 1/4-20 Hex Nylock Flange SPRING-EXT, 1.04 ODX6.935LGX.148WR, BLK WASHER, 5/16" USS NUT, 5/16-18 HEX NYLOCK FLANGE NUT SCREW, TRUSS HD TORX DR5/16-18X0.875 BLK NUT, Hex, Nylon Locking, 3/ BOLT,1/4-20X0.750,GR5,STD NECK,SQ,ZC/CL X12 1 PIN, CLEVIS, 1/2 X 1-1/2, PLATED PIN, SURE LOCK COTTER,.09 X.75, CZ X14 2 BOLT, 5/16-18 X 1-3/4" GD5 YZ WASHER, 3/8" GR. 9 FLAT X6 1 * PIN, COTTER, 1/8" X 3/4 Copyright Briggs and Stratton. All Rights reserved Sep-2018

61 Operator Compartment Group S/N & Above REF NO PART NO QTY DESCRIPTION BEARING, FLANGE KNEE PAD, SRS Z1, STAND ON BUMPER, RUBBER A 1 WELD, PLATFORM, SRSZ1 - BLK X8 4 BOLT, 5/16-18 X 1" GRD5 YZ X10 4 BOLT, 3/8-16 X 1-1/4" GD5 CZ NUT, 5/16-1/8, HEX, CNTR LK, ZINC PHOS/OIL NUT, 1/2-13 Hex Side Lock SPRING-EXT, 1.04 ODX6.935LGX.148WR, BLK SHOCK / SPRING ASSEMBLY A 1 WELD, SUSPENSION LINK - BLK BEARING-FLANGE, 5/ SPACER, STEP,.39 X 1.00 X.69, CZ X44 1 BOLT, 3/8-16 X 5-1/2" GD5 CZ NUT, Hex, Nylon Locking, 3/ X12 1 PIN, CLEVIS, 1/2 X 1-1/2, PLATED JOINT-BALL THD.500ID, CLR ZINC X16 1 BOLT, 1/2-13 X 2" GD5 CZ PIN, SURE LOCK COTTER,.09 X.75, CZ SPACER,.33 X.63 X.25, CZ SPACER,.328 X 1.0 X.85, CZ SPACER,.52 X 1.00 X.22, PM, CZ ROD, THREADED, 1/2-20 X WASHER, 5/16" SAE WASHER, 3/8" Fender SPACER,.52 X.74 X 1.50, CZ X18 2 BOLT, 1/2-13 X 2-1/4" GD5 CZ B 1 PLATE, PAD MOUNT, SRSZ1 - RED NUT, 1/2-20 Hex Jam WASHER, 5/16" USS X14 1 BOLT, 5/16-18 X 1-3/4" GD5 YZ NUT, 5/16-18 HEX NYLOCK FLANGE NUT BUMPER, RUBBER, 1/ NUT, 1/4-20 Hex Nylock Flange X6 2 BOLT, 5/16-18 X 3/4 GD SCREW, TRUSS HD TORX DR5/16-18X0.875 BLK X8 6 BOLT, 5/16-18 X 1" GRD5 YZ NUT, 3/8-16 HEX NYLOCK FLANGE WASHER, 3/8 SAE BOLT,1/4-20X0.750,GR5,STD NECK,SQ,ZC/CL WASHER, 5/16" Fender X16 1 PIN, CLEVIS, 3/8 X 2, PLATED X6 1 * PIN, COTTER, 1/8" X 3/ WASHER, 3/8" GR. 9 FLAT PLATE, LINK, OPC, SRSZ, CZ PLATE, SWITCH, OPC, SRSZ, CZ GROMMET, 7/8"ID, 1/4" THICK STK SPACER,.38 X.50 X.27, CZ BOLT,1/4,PUSHNUT RETAINER,PHOSPHATE/OIL Copyright Briggs and Stratton. All Rights reserved Sep-2018

63 Parking Brake Group REF NO PART NO QTY DESCRIPTION GRIP, BLACK FLEXIBLE ROD, BRAKE CTRL, LOWER - LH ROD, BRAKE CTRL, LOWER - RH SPRING-COMP,.375IDX2.75LGX.054WR, SS SPRING-COMP,.496ID X 3.00LG X.112WR CLEVIS, 5/16-24, STEEL, CLEAR ZINC A 1 WELD, BRAKE SHAFT PIVOT - BLK ROD, BRAKE, STAND-ON A 1 PLATE, BRAKE LEVER, SRSZ - BLK SHAFT, UPPERBRAKE ROD SHORT, SRSZ PLATE, BRAKE TAB, STAND-ON COLLAR, 1/2 SET (1/2 SPLIT COLLAR IN MODEL) A 1 PLATE, PARKING BRAKE SWITCH - BLK X12 1 BOLT, 1/4-20 X 1-1/2 GD5 CZ X10 1 BOLT, 1/4-20 X 1-1/4 GD5 CZ NUT, Hex, Serrated Flange, 1/ NUT, 1/4-20 Hex Nylock Flange SEE ELECTRICAL GROUP COLLAR, 5/16" Set BEARING, 5/8" FLANGED, PLASTIC BALL BEARING, 1/2 FLANGED, PLASTIC BALL X8 1 PIN, CLEVIS, 5/16 X 1, PLATED PIN, HAIR,.0585 X 1-1/8, 1/4 EYE, YZ X6 10 BOLT, 1/4"-20 X 3/4" GD5 YZ WASHER, 1/4 SAE SPRING-EXT,.740 ODX2.025LGX.072WR, BLK NUT, Hex, Nylon Lock, 5/ COLLAR, DOUBLE SPLIT, 7MM NUT, Hex, 5/ SCREW-HEX SEMS WSHR 1/4-20 X.88 DOG PT WASHER, 5/16" USS SEE MAIN FRAME GROUP Copyright Briggs and Stratton. All Rights reserved Sep-2018

65 Spindle Service Parts REF NO PART NO QTY DESCRIPTION SPINDLE ASSEMBLY, Complete -(*See Footnote) FITTING, 1/8 NPT STR, SHORT -(SV) TRASH SHIELD -(SV) BEARING,.98 X 2.44 X.67 -(SV) HOUSING, SPINDLE -(SV) FITTING, RELIEF, 1-5 PSI -(SV) SPACER, 1.00 X 1.25 X (SV) SHAFT, SPINDLE -(SV) Footnotes: (* Includes Items # 2-8) Copyright Briggs and Stratton. All Rights reserved Sep-2018

67 Transaxle Drive Group REF NO PART NO QTY DESCRIPTION PULLEY-IDLER OD 0.378ID 1.06 W BRG SPACER, IDLER ARM, 1/2, PM BEARING, BALL, AXLE A 1 WELD, IDLER ARM, PUMP DRIVE - BLK BELT, A-SEC, 50.5"EL, RAW EDGE, COG EYE BOLT, 3/8-16 X 6, 3THRD, 1EYE, CZ SPRING-EXT, 1.04 ODX6.935LGX.148WR, BLK SPACER,.52 X.84 X 1.53, PM SPACER,.39 X 1.00 X.50, PM, CZ BUSHING,.38 X.88 X X28 1 BOLT, 1/2-13 X 3-1/2, HEX HD, GD5, CZ (SV) NUT, 1/2-13 HEX NYLOCK FLANGE NUT, 3/8-16 HEX NYLOCK FLANGE WASHER, 3/8 SAE NUT, 3/8-16 Hex Large Serrated Flange X14 1 BOLT, 3/8-16 X 1-3/4" GD5 CZ X16 1 BOLT, 3/8-16 X 2, GD5, CZ WASHER, 3/8" GR. 9 FLAT PULLEY, CRANKSHAFT (SEE ENGINE & PTO GROUP) Copyright Briggs and Stratton. All Rights reserved Sep-2018

69 Transaxle SERVICE Parts - Hydro-Gear ZT3400 REF NO PART NO QTY DESCRIPTION X1 1 SEALANT X1 1 FILTER, OIL, X2 1 SEAL, CONTROL ARM, 18X32X7, # X16 1 SEAL, Lip,.67 x 1.58 x X4 1 RING, RET 2.06 INT, X1 1 KIT, BEARING, ZT-3400, X2 1 SHAFT, AXLE, ZT-3400, X5 1 BEARING BALL, 1.0 X 52 X 15 OPEN 6205M X1 1 KIT, SEAL, AXLE - HG# HUB, ASM, TRANS # BRAKE ARM, ZT E-CLIP, BRAKE ARM, ZT3100 & ZT X3 1 CAP, AXLE, ZT-3400, X2 1 KIT, SEAL - HG# X12 1 KIT, CHARGE PUMP, ZT2800, ZT X4 1 KIT, FAN-PULLEY, ZT-3400, X4 1 KIT, INPUT SHAFT (BEARING AND SHAFT ONLY) X4 1 KIT, PLUG, BRAKE BORE, OUTBOARD Copyright Briggs and Stratton. All Rights reserved Sep-2018

71 Wheel & Tire Group REF NO PART NO QTY DESCRIPTION TIRE ASSM, 11 X 4-5, FF / CB X56 2 BOLT, 1/2-13 X 7 GD5 CZ WASHER, 1/2 SAE NUT, 1/2-13 HEX NYLOCK FLANGE CASTER AXLE DDSH X1 2 BEARING, ROLLER -(SV) BEARING, RETAINER -(SV) NUT, 1/2-20, FOR WHEEL BOLT SILVER TIRE WHEEL ASM, 23 X , TURF MASTER -(36" Deck Models) TIRE WHEEL ASM, 23 x , TURF SMART -(48" Deck Models) X2 2 TIRE, 23 X NHS, TURF MASTER -(Service part for ) X2 2 TIRE, 23 X NHS, TURF SMART -(Service part for ) X1 2 WHEEL, 12.0 X 7.0, 4/4.0", SILVER -(Service part for ) X1 2 WHEEL ASM, 12 X , 1.87OS, SLVR -(Service part for ) Copyright Briggs and Stratton. All Rights reserved Sep-2018

72 Hardware Identification & Torque Specifications Torque Specification Chart FOR STANDARD METRIC MACHINE HARDWARE (Tolerance ± 20%) Property Class 5.6 Class Class 8.8 Class 10.9 Class 12.9 Size Of in/lbs in/lbs in/lbs in/lbs Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm. ft/lbs Nm. M M M M M M M M M M M M M M M M M M M The guides and ruler furnished below are designed to help you select the appropriate hardware Inside Diameter (in) Nut, 1/2-16 1/4 1/2 3/ /4 1/2 3/ Thread Diameter (mm) Body Diameter 2 Screw, 1/2-16 x 2 1/4 1/2 3/ Body Diameter Nut, M8 Screw, M x 25 Thread Diameter (mm) Threads per inch Body Length Distance between threads (mm) Threads per inch /4 1/2 3/4 Body Length (mm) Body Length (in) 4 Torque Specification Chart FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%) Hardware Grade No Marks SAE Grade 2 SAE Grade 5 SAE Grade 8 Size Of in/lbs in/lbs in/lbs Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm / / / / / / / / / / / / / / / / / / , ,000 1,360.0 NOTES 1. These torque values are to be used for all hardware excluding: locknuts, self-tapping screws, thread forming screws, sheet metal screws and socket head setscrews. 2. Recommended seating torque values for locknuts: a. for prevailing torque locknuts - use 65% of grade 5 torques. b. for flange whizlock nuts and screws - use 135% of grade 5 torques. 3. Unless otherwise noted on assembly drawings, all torque values must meet this specification. Common Hardware Types Hex Head Capscrew Washer Standard Hardware Sizing When a washer or nut is identified as 1/2 (M8), this is the Nominal size, meaning the inside diameter is 1/2 inch (8mm metric thread diameter); if a second number is present it represents the threads per inch (distance between threads). Carriage Bolt Wrench & Fastener Size Guide Lockwasher Hex Nut When bolt or capscrew is identified as 1/2-16 x 2 (M x 50), this means the Nominal size, or body diameter is 1/2 inch (8mm metric thread diameter), the second number,16, represents the threads per inch, (distance between threads). The final number is the body length of the bolt or screw, 2 inches (50mm). 1/4 Bolt or Nut Wrench 7/16 M6 Bolt or Nut Wrench 10mm 5/16 Bolt or Nut Wrench 1/2 M8 Bolt or Nut Wrench 13mm 3/8 Bolt or Nut Wrench 9/16 M10 Bolt or Nut Wrench 17mm 7/16 Bolt or Nut Wrench (Bolt) 5/8 Wrench (Nut) 11/16 M12 Bolt or Nut Wrench 19mm 1/2 Bolt or Nut Wrench 3/4 M14 Bolt or Nut Wrench 22 mm

Reproduction. Not for. ZT3500 Series Zero-Turn Riding Mower. Parts Manual. Products

Reproduction. Not for. ZT3500 Series Zero-Turn Riding Mower. Parts Manual. Products Parts Manual Products ZT3500 Series Zero-Turn Riding Mower Mfg. No. Description 5900506 ZT3500, 24HP Briggs & Stratton w/ 48" Mower (ZT3500B2448) 5900521 ZT3500, 27HP Briggs & Stratton w/ 48" Mower (ZT3500B2748)