Parts Manual. Field and Brush Mower. 16HP Tractors. 13.5HP Tractors. 13HP Tractors. 15HP Tractors

Size: px

Start display at page:

Download "Parts Manual. Field and Brush Mower. 16HP Tractors. 13.5HP Tractors. 13HP Tractors. 15HP Tractors"

Willis Randall
5 years ago
Views:

1 Parts Manual Field and Brush Mower.5HP Tractors Mfg. No. Description 20.5HP, Walk-Behind Brush Mower (Simplicity) 25.5HP, Walk-Behind Brush Mower (Ferris GM25H) 25.5HP, Walk-Behind Brush Mower (Giant-Vac GM25H) HP Tractors Mfg. No. Description 20 HP, Walk-Behind Brush Mower (Simplicity) 2 HP, Walk-Behind Brush Mower (Ferris GM250BS, GM25BS) 25 HP, Walk-Behind Brush Mower (Giant-Vac GM250BS, GM25BS) HP, Walk-Behind Brush Mower (Snapper FB250BV) HP Tractors Mfg. No. Description 205 HP, Walk-Behind Brush Mower (Simplicity) 250 HP, Walk-Behind Brush Mower (Ferris GM25AWV) 252 HP, Walk-Behind Brush Mower (Giant-Vac GM25AWV) HP, Walk-Behind Brush Mower (Snapper FB250KW) HP Tractors Mfg. No. N/A Description HP, Walk-Behind Brush Mower (Giant-Vac GM25BS-E) Rev. 0/200 TP BC-UV

3 Table Of Contents TRACTOR / MOWER DECK COMPONENTS PAGES Handle Parts Group - S/N 00 & Below... 2 Handle Parts Group - S/N 0000 & Up... Engine Deck Group - S/N 00 & Below... Engine Deck Group - S/N 0000 & Up... Electrical & Misc. Group... Mower Deck Parts Group Decals Group Torque Specification Chart... Inside Back Cover

4 Handle Parts Group - S/N 00 & Below NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Q 5 See Mower Deck Group See Engine Deck Group See Engine Deck Group Through Transmission Shift Arm HP HP HP 2 - HP HP 25 - HP HP HP HP 2 TP BC-UV

5 Handle Parts Group - S/N 00 & Below REF NO. SIMPLICITY/FERRIS/ SNAPPER PART NO. GIANT-VAC PART NO. QTY. DESCRIPTION 5 2 Handle grip Blade Clutch Engagement Lever 50 Throttle Control Cable Assembly, HP Honda Throttle Control Cable Assembly, HP Kawasaki 2 50 Throttle Control Cable assembly, HP Briggs 2 Throttle Control, T-Handle Rivet, / 2 Throttle Speed Indicator Plate Blade Engage Lever Lock Bracket Capscrew, Hex Head, 5/- x / 5 Rod, Fitting End 5 Lockwasher, 5/ 2 Nut, Hex, 5/ Screw, -2 x / 55 Control Deck & Dash Panel 2 Capscrew, Hex Head, /-20 x -/ Nut Assembly, Push Nut, 5/ 52 2 Safety Bar Pivot Bracket, Left 5 Safety Switch Safety Switch Mounting Bracket 20 * 2 2 Machine Screw Assembly, -2 x / Safety Bar Safety Bar Pivot Bracket, Right Upper Handle 2 5 Foam Handle Cover 25 Nut, Hex Flangelock, /2-2 2 Capscrew, Hex Head, 5/- x -/ Bearing, / ID Drive Engagement Bar 2 55 Ball Joint, /-2, LH 5 Lockwasher, / 0 Nut, Jam, /-2 2 Flatwasher, / Lockwasher, / 55 5 Ball Joint, 5/ Nut, Hex Jam, /-2, LH Lower Handle 55 Nut, Wing, / Transmission Drive Intermediate Lever Footnotes 20 - HP HP HP 2 - HP HP 25 - HP HP HP HP TP BC-UV

6 Handle Parts Group - S/N 00 & Below NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Q 5 See Mower Deck Group See Engine Deck Group See Engine Deck Group Through Transmission Shift Arm HP HP HP 2 - HP HP 25 - HP HP HP HP TP BC-UV

7 Handle Parts Group - S/N 00 & Below REF NO. SIMPLICITY/FERRIS/ SNAPPER PART NO. GIANT-VAC PART NO. QTY. DESCRIPTION Deck Safety Switch Bracket Deck Safety Switch 5 2 Bridge Pin, #2 2 0 Washer, / 02 Capscrew, Hex Head, /2 x 2-/ Blade Clutch Engagement Lever Bracket Capscrew, Hex Head, 5/- x 22 Nut, Hex, / Ball Joint, /-2 RH Transmission Engagement Rod, Upper 2 2 Capscrew, Hex Head, 5/- x -/ Nut, / Bolt, Shoulder, /2 x -/ to / Transmission Engagement Rod, Lower 5 20 Nut, Hex Jam, 5/ Nut, Hex Centerlock, / Safety switch return spring Footnotes 20 - HP HP HP 2 - HP HP 25 - HP HP HP HP 5 TP BC-UV

8 Handle Parts Group - S/N 0000 & Up NOTE: Unless noted otherwise, use the standard hardware torque specification chart. QS See Mower Deck Group See Engine Deck Group See Engine Deck Group 5 THROUGH TRANSMISSION SHIFT ARM HP HP HP 2 - HP HP 25 - HP HP - HP HP - HP HP N/A - HP TP BC-UV

9 Handle Parts Group - S/N 0000 & Up REF NO. SIMPLICITY/FERRIS/ SNAPPER PART NO. GIANT-VAC PART NO. QTY. DESCRIPTION 5 2 Handle grip Blade Clutch Engagement Lever 50 Throttle Control Cable Assembly, HP Honda Throttle Control Cable Assembly, HP Kawasaki 2 50 Throttle Control Cable assembly, HP Briggs 2 Throttle Control, T-Handle Rivet, / 2 Throttle Speed Indicator Plate Blade Engage Lever Lock Bracket 2 Capscrew, Hex Head, /- x 5 Rod, Fitting End 5 Lockwasher, 5/ 2 Nut, Hex, 5/- 000 Screw, -2 x / 55 Control Deck & Dash Panel 2 Capscrew, Hex Head, /-20 x -/ 0222 Nut Assembly, Push Nut, 5/ 52 2 Safety Bar Pivot Bracket, Left 5 Safety Switch Safety Switch Mounting Bracket Safety switch return spring Safety Bar Safety Bar Pivot Bracket, Right Upper Handle 2 5 Foam Handle Cover 25 Nut, Hex Flangelock, /2-2 2 Capscrew, Hex Head, 5/- x -/ Bearing, / ID Drive Engagement Bar Handle, Grip, Reverse 5 Lockwasher, / 0 Nut, Jam, /-2 2 Flatwasher, / Lockwasher, / 55 5 Ball Joint, 5/ Nut, Hex Jam, /-2, LH Lower Handle 0 Nut, Jam, / Transmission Drive Intermediate Lever Footnotes 20 - HP HP HP 2 - HP HP 25 - HP HP - HP HP - HP HP N/A - HP TP BC-UV

10 Handle Parts Group - S/N 0000 & Up NOTE: Unless noted otherwise, use the standard hardware torque specification chart. QS See Mower Deck Group See Engine Deck Group See Engine Deck Group 5 THROUGH TRANSMISSION SHIFT ARM HP HP HP 2 - HP HP 25 - HP HP - HP HP - HP HP N/A - HP TP BC-UV

11 Handle Parts Group - S/N 0000 & Up REF NO. SIMPLICITY/FERRIS/ SNAPPER PART NO. GIANT-VAC PART NO. QTY. DESCRIPTION Deck Safety Switch Bracket Deck Safety Switch 5 2 Bridge Pin, #2 2 0 Washer, / 02 Capscrew, Hex Head, /2 x 2-/ Blade Clutch Engagement Lever Bracket Capscrew, Hex Head, 5/- x 22 5 Nut, Hex, / Ball Joint, /-2 RH Transmission Engagement Rod, Upper 2 2 Capscrew, Hex Head, 5/- x -/ Nut, / Bolt, Shoulder, /2 x -/ to / Transmission Engagement Rod, Lower 5 20 Nut, Hex Jam, 5/ Nut, Hex Centerlock, / Clip, Hair Pin Footnotes 20 - HP HP HP 2 - HP HP 25 - HP HP - HP HP - HP HP N/A - HP TP BC-UV

12 Engine Deck Group - S/N 00 & Below NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Q 5, 2, See Mower Deck Parts Group To Engine Shaft 2 2 See Handle Parts Group To Transaxle 5 Ref. No. 2, 0, 2,, 50 Apply to S/N 00 and Up Only Left 5 Right Transaxle HP HP HP 2 - HP HP 25 - HP HP HP HP TP BC-UV

13 Engine Deck Group - S/N 00 & Below REF NO. SIMPLICITY/FERRIS/ SNAPPER PART NO. GIANT-VAC PART NO. QTY. DESCRIPTION Engine -.5 HP Briggs & Stratton 2 2 Engine - HP Honda Engine - HP Kawasaki 2 0 Capscrew, Hex Head, 5/- x / 5 22 Auxiliary fuel tank base 2 Nut, Hex, 5/- 5 2 Lockwasher, 5/ 5 22 Clutch Cover Plate 50 2 Nut, Hex, / Lockwasher, / 0 Flatwasher, / 02 2 Cap, Black 5 22 Engine deck (S/N 005 & Below) 22 Engine deck (S/N 00 & Up) 55 2 Transmission Forward Mounting Hanger 5 Eyebolt, 5/-x-/ Capscrew, Hex Head, /- x Idler Arm Pivot Boss Sleeve Bushing, / ID 220 Transmission Idler Arm Flatwasher, /2 2 Idler Spring Idler Tension Rod Engine deck back cover Washer, Plain, 5/ 25 2 Capscrew, 5/- x -/2 2 2 Capscrew, /- x -/ Capscrew, /- x -/ Lower handle mounting plate /- Reverse Locknut 0 Capscrew, 5/- x 2-/ Trans belt idler tensioning rod Transmission Idler Boss Idler Pulley 2 /- x hex bolt 5 55 Engine Shaft Spacer, " 5 2 Blade Clutch Drive Pulley 5 Engine Shaft Spacer - /" 5 Transmission Drive Pulley 0 Flatwasher Heavy Duty, / Footnotes 20 - HP HP HP 2 - HP HP 25 - HP HP HP HP TP BC-UV

14 Engine Deck Group - S/N 00 & Below NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Q 5, 2, See Mower Deck Parts Group To Engine Shaft 2 2 See Handle Parts Group To Transaxle 5 Ref. No. 2, 0, 2,, 50 Apply to S/N 00 and Up Only Left 5 Right Transaxle HP HP HP 2 - HP HP 25 - HP HP HP HP TP BC-UV

15 Engine Deck Group - S/N 00 & Below REF NO. SIMPLICITY/FERRIS/ SNAPPER PART NO. GIANT-VAC PART NO. QTY. DESCRIPTION 0 Lockwasher, / 5 Capscrew, Socket Head, /-20 x -/ Transaxle 50 Key, Engine Shaft, / x / x 2-/ 5 2 Key, Axle Shaft / x / x -/ "E" clip Capscrew, Hex Head, /- x -/ 5 20 Blade clutch idler pulley 5 Idler pulley spacer bushing 5 2 Blade Clutch Idler Boss Blade Clutch Idler Tensioning Rod Drive Wheek, Left Drive Wheel, Right (not shown) Footnotes 20 - HP HP HP 2 - HP HP 25 - HP HP HP HP TP BC-UV

16 Engine Deck Group - S/N 0000 & Up NOTE: Unless noted otherwise, use the standard hardware torque specification chart. QS 2,, 50, 5 5 See Mower Deck Parts Group To Engine Shaft See Handle Parts Group To Transaxle 25 2 Left Right Transaxle HP 25 - HP HP - HP HP - HP HP N/A - HP HP 2 - HP TP BC-UV

17 Engine Deck Group - S/N 0000 & Up REF NO. SIMPLICITY/FERRIS/ SNAPPER PART NO. GIANT-VAC PART NO. QTY. DESCRIPTION 2 0 Capscrew, Hex Head, 5/- x / 2 22 Auxiliary fuel tank base 2 Nut, Hex, 5/- 5 Lockwasher, 5/ Cap, Black 22 Engine Deck (S/N 00 & Up) 5 22 Engine Deck (S/N 005 & Below) 50 2 Nut, Hex, / Lockwasher, / Idler Arm Pivot Boss Sleeve Bushing, / ID 220 Transmission Idler Arm 52 2 Engine deck back cover 2 Capscrew, 5/- x -/2 00 Flatwasher, /2 Idler Spring 22 Idler Tension Rod 0 Flatwasher, / 2 Capscrew, /- x -/ 5 20 Idler Pulley Capscrew, /- x -/ Lower handle mounting plate Nut, Hex / Capscrew, /- x -/ 2 Capscrew, Hex Head, /- x Engine Shaft Spacer, /" Blade Clutch Drive Pulley Spacer, /" 2 5 Transmission Drive Pulley 2 0 Flatwasher Heavy Duty, / Lockwasher, / 5 Capscrew, Socket Head, /-20 x -/ Transaxle 50 Key, Engine Shaft, / x / x 2-/ 5 2 Key, Axle Shaft / x / x -/ "E" clip 5225 Washer Drive Wheek, Left Drive Wheel, Right (not shown) Capscrew, Hex Head, /- x -/ Footnotes HP 25 - HP HP - HP HP - HP HP N/A - HP HP 2 - HP TP BC-UV

18 Engine Deck Group - S/N 0000 & Up NOTE: Unless noted otherwise, use the standard hardware torque specification chart. QS 2,, 50, 5 5 See Mower Deck Parts Group To Engine Shaft See Handle Parts Group To Transaxle 25 2 Left Right Transaxle HP 25 - HP HP - HP HP - HP HP N/A - HP HP 2 - HP TP BC-UV

19 Engine Deck Group - S/N 0000 & Up REF NO. SIMPLICITY/FERRIS/ SNAPPER PART NO. GIANT-VAC PART NO. QTY. DESCRIPTION Blade clutch idler pulley 5 Idler pulley spacer bushing Blade Clutch Idler Boss Blade Clutch Idler Tensioning Rod 0 Capscrew, 5/- x 2-/ Transmission Forward Mounting Hanger 5 Eyebolt, 5/-x-/ 5 22 Clutch Cover Plate Engine -.5 HP Briggs & Stratton 2 Engine - HP Honda 50 Engine - HP Kawasaki 5 Engine - HP Briggs & Stratton Footnotes HP 25 - HP HP - HP HP - HP HP N/A - HP HP 2 - HP TP BC-UV

20 Electrical & Misc. Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Q2 Secure to R.H. side of Engine Deck 2 5 To Handle Group Ref. No. To Transmission To Engine Starter Ground L.H. Rear Engine Bolt 20 To Handle Group Ref. No., Top Pin Mower Belt Engine Pulley Mower Clutch Pulley Adjustable Idler Engine Pulley Transmission Belt Transmission Pulley 20 - HP HP HP 2 - HP HP 25 - HP HP - HP HP - HP HP N/A - HP TP BC-UV

21 Electrical & Misc. Group REF NO. SIMPLICITY/FERRIS/ SNAPPER PART NO. GIANT-VAC PART NO. QTY. DESCRIPTION 5 Auxiliary Fuel Line w/clamps - " - HP Honda Auxiliary Fuel Line w/clamps - " - HP Kawasaki &.5 Briggs & Stratton 2 22 Auxiliary Fuel Tank Bracket 22 2 Plate, Lock Engage / Disengage Capscrew, 5/- x / Flatwasher, 5/ 5 2 Lockwasher, 5/ 2 2 Nut, Hex, 5/-2 55 Capscrew, Hex Head, /-2 x 5/ 5 Lockwasher, / Flatwasher, / Cable - Solenoid to Starter Coil Solenoid 5 Keyed start switch 2 Keyed off switch (manual start units only) 20 Keyed off switch, Honda Models Wire Harness, Honda Wire Harness, Briggs & Stratton Wire Harness, Kawasaki 20 Wire, Jumper, Honda Models 22 Nut, Hex, / Belt, Blade Clutch Drive 2 Belt, Transmission Drive 20 5 Battery Cable, Battery Negative to Ground 22 5 Cable, Battery Positive to Solenoid 2 Battery Rubber 2 5 Battery Hold-Down Capscrew, TEK, # x / 2 2 Capscrew, Hex Head, /-20 x / Footnotes 20 - HP HP HP 2 - HP HP 25 - HP HP - HP HP - HP HP N/A - HP TP BC-UV

22 Mower Deck Parts Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart See Handle Parts Group, 20, See Engine Dec Parts Group, Torque to 2 ft. lbs. ( N.m.) HP HP HP 2 - HP HP 25 - HP HP - HP HP - HP HP N/A - HP 20 TP BC-UV

23 Mower Deck Parts Group REF NO. SIMPLICITY/FERRIS/ SNAPPER PART NO. GIANT-VAC PART NO. QTY. DESCRIPTION 2 Nut, Hex, 5/ 2 5 Lockwasher, 5/ Front Bumper Bar 5 2 Chain Curtain Length 5 2 Capscrew, Hex Head, 5/- x -/2 (bumper rear holes) 5 2 Chain Curtain Bracket 55 Chain Curtain Mounting Rod Capscrew, Hex Head, /- x 5 Lockwasher, / 5 20 Blade Deck Skid - Left Blade Deck Skid - Right (not shown) 50 Nut, Hex, /- 2 0 Capscrew, Hex Head, 5/- x / 5 2 Anti-torque Bracket 5 Clutch Spring Blade Clutch Engagement Rod 5 Capscrew, Hex Head, /- x -/2 0 Flatwasher, Heavy Duty, / x -/ Clutch Assembly 20 2 Capscrew, Hex Head, Anti-torque, 5/- x (Not Shown) 2 2 Nut, Hex Centerlock, 5/- (Not Shown) 22 5 Clutch Spacer - / 2 0 Washer, / Blade SpindleAssembly Cutting Blade Reinforcement Channel Cutting Blade 2 2 Lockwasher, 5/ Capscrew, Socket Head, 5/- x -/ Discharge Deflector Washer, 5/ 5 2 Discharge Cover Blade Deck 2 2 Capscrew, Hex Head, 5/- x -/ (bumper front holes) Footnotes 20 - HP HP HP 2 - HP HP 25 - HP HP - HP HP - HP HP N/A - HP 2 TP BC-UV

24 START FAST SLOW Decals Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 2 DANGER KEEP HANDS and FEET AWAY CAUTION ROTATING PARTS DANGER KEEP HANDS and FEET AWAY EAR EYE BREATHING PROTECTION. BEFORE OPERATING READ OPERATORS MANUAL FOR OPERATING AND SAFETY INSTRUCTIONS. 2. DO NOT OPERATE WITH ANY GUARDS OR COMPONENT PARTS REMOVED FROM UNIT.. BEFORE MAKING ANY ADJUSTMENTS OR REPAIRS STOP ENGINE AND REMOVE SPARK PLUG WIRES.. WHILE IN OPERATION KEEP ALL PARTS OF BODY AWAY FROM INTAKE AND EXHAUST SECTIONS. 5. WHEN OPERATING MACHINE KEEP PEOPLE AND PETS A SAFE DISTANCE AWAY. DANGER DANGER FLYING MATERIAL DANGER KEEP HANDS and FEET AWAY FREE WHEEL DRIVE 5 OFF ON START SPEED ADJUST +R +F Ref. No. Apply to S/N 0000 and Up Only 20 - HP HP HP 2 - HP HP 25 - HP HP - HP HP - HP HP N/A - HP 22 TP BC-UV

25 Decals Group REF NO. SIMPLICITY/FERRIS/ SNAPPER PART NO. GIANT-VAC PART NO. QTY. DESCRIPTION 00 Decal, Danger 2 02 Decal, Ear Eye Protection Req. 2 0 Decal, Rotating Parts 0 Decal, Thrown Objects Decal, Transmission Drive 5 0 Decal, Key Switch Decal, Throttle Control Decal, Pin Stripe 255 Decal, Simplicity Logo Decal, Ferris Logo Decal, Giant-Vac Logo 50 Decal, Snapper 52 2 Decal, Speed Adjust Footnotes 20 - HP HP HP 2 - HP HP 25 - HP HP - HP HP - HP HP N/A - HP 2 TP BC-UV

27 Hardware Identification & Torque Specifications Common Hardware Types Hex Head Capscrew Washer Torque Specification Chart FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%) Carriage Bolt Lockwasher Hex Nut Standard Hardware Sizing When a washer or nut is identified as /2, this is the Nominal size, meaning the inside diameter is /2 inch; if a second number is present it represent the threads per inch When bolt or capscrew is identified as /2 - x 2, this means the Nominal size, or body diameter is /2 inch; the second number represents the threads per inch ( in this example, and the final number is the body length of the bolt or screw (in this example 2 inches long). The guides and ruler furnished below are designed to help you select the appropriate hardware and tools. 0 / /2 / / /2 / 2 / /2 / / /2 / Screw, /2 x 2 Body Diameter Body Length Nut, /2 Inside Diameter Hardware Grade No Marks SAE Grade 2 SAE Grade 5 SAE Grade Size Of in/lbs in/lbs in/lbs Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm / / / / / / / / / / / / / / / / / / , ,000,0.0 NOTES. These torque values are to be used for all hardware excluding: locknuts, self-tapping screws, thread forming screws, sheet metal screws and socket head setscrews. 2. Recommended seating torque values for locknuts: a. for prevailing torque locknuts - use 5% of grade 5 torques. b. for flange whizlock nuts and screws - use 5% of grade 5 torques.. Unless otherwise noted on assembly drawings, all torque values must meet this specification. Wrench & Fastener Size Guide / 5/ / / DIA. /2 DIA. / Bolt or Nut Wrench / 5/ Bolt or Nut Wrench /2 / Bolt or Nut Wrench / / Bolt or Nut Wrench (Bolt) 5/ Wrench (Nut) / /2 Bolt or Nut Wrench /

FIELD & BRUSH MOWER SERIES 0

FIELD & BRUSH MOWER SERIES 0 Parts Manual for SERIES 0 MODEL FB13250BS FB13250BV FB15250KW McDonough, GA, 30253 U.S.A. COPYRIGHT 2005 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED. Revision 1, 8/30/2005 Table Of Contents PAGE GROUP