TL 8040 MASTER PARTS MANUAL

Transcription

1 ROUGH TERRAIN VARIABLE REACH FORK LIFTS TL 8040 MASTER PARTS MANUAL Machine Serial No. The information and illustrations in this manual have been approved as accurate at the time of printing. However, the manual may contain information on options not present on your machine. ARDCO/Traverse Lift L.L.C. reserves the right to make changes and improvements in its product at anytime without notice or obligation. a subsidiary of PETTIBONE L.L.C. P.O. Box / Houston, TX Ship to address: 322 Riley Road / Houston, TX Main Switchboard: (713) TL CALL ARDCO

2 Copyright 1997 BILL OF MATERIAL Item Part No. Qty. Description Serial No./Date of Change TL 8040 TABLE OF CONTENTS NOMENCLATURE... 7 PARTS ORDERING INSTRUCTIONS... 8 ORGANIZATION OF PUBLICATION... 9 HOW TO USE THIS MANUAL... 9 USING THE MANUAL ON CD-ROM... 9 UNDERSTANDING THE BILL OF MATERIAL ABBREVIATIONS USED IN THIS MANUAL AXLE GROUP - FRONT TL-100, AXLE, FRONT (LPP00248) TL-100A, AXLE, FRONT, BOX & COVERS TL-100B, AXLE, FRONT, 45% L. SLIP DIFFERENTIAL TL-100C, AXLE, FRONT, HUB REDUCTION R= TL-100D, AXLE, FRONT, 10 DISCS BRAKE TL-100E, AXLE, FRONT, INTEGRATED CYLINDER TL-100F, AXLE, FRONT, OSCILLATING SUPPORT AXLE GROUP - REAR TL-101, AXLE, REAR (LPP00249) TL-101A, AXLE, REAR, BOX & COVERS TL-101B, AXLE, REAR, DIFFERENTIAL W/O BLOCK TL-101C, AXLE, REAR, HUB REDUCTION R= TL-101D, AXLE, REAR, 10 DISCS BRAKE TL-101E, AXLE, REAR, INTEGRATED CYLINDER TL-101F, AXLE, REAR, OSCILLATING SUPPORT DECAL GROUP TL-241, KIT, DECAL (APP00838) DRIVELINE GROUP TL-197, DRIVELINE ASSEMBLY ENGINE GROUP TL-242, AIR INTAKE ASSEMBLY (CUMMINS ENG.) TL-194, AIR INTAKE ASSEMBLY (JOHN DEERE ENG.) TL-207, ENGINE ACCESSORIES (CUMMINS ENG.) TL-246, ENGINE ACCESSORIES (JOHN DEERE ENG.) TL-245, EXHAUST ASSEMBLY (CUMMINS ENG.) TL-217, EXHAUST ASSEMBLY (JOHN DEERE ENG.) TL-123, RADIATOR ASSEMBLY (CUMMINS ENG.) TL-195, RADIATOR ASSEMBLY (JOHN DEERE ENG.) TL (Continued CALL ARDCO on next page)

3 FRAME GROUP TL-202, CARRIAGE ASSEMBLY TL-203, BOOM ASSEMBLY TL-204, INNER BOOM ASSEMBLY TL-221, FORK ROTATE CARRIAGE ASSEMBLY TL-111, QUICK DISCONNECT TL-236, OPERATOR S COMPARTMENT TL-198, AXLE BOLT MOUNTING TL-179, ENGINE MOUNT ASSEMBLY (Cummins Eng.) TL-132, ENGINE MOUNT ASSEMBLY (John Deere Eng.) TL-131, TRANSMISSION MOUNT ASSEMBLY HYDRAULIC CYLINDER GROUP TL-050, CYLINDER, FORK TILT (LPP28796) TL-051, CYLINDER, FRAME LEVELING (LPP27552) TL-084, CYLINDER, BOOM LIFT (LPP27773) TL-199, CYLINDER, BOOM EXTEND (APP00511) TL-200, CYLINDER, CARRIAGE TRANSFER (APP00510) TL-116, CYLINDER, SLAVE (APP00279) TL-220, CYLINDER, FORK ROTATE (LPP OPTIONAL) HYDRAULIC HOSING GROUP TL-230, HOSING, BRAKE SYSTEM, ULTRA/GRESEN TL-234, HOSING, CYLINDER TL-235, HOSING, JOYSTICK (WALVOIL) / MID INLET VALVE (GRESEN) TL-228, HOSING, STEERING SYSTEM - CUMMINS ENG TL-227, HOSING, STEERING SYSTEM - DEERE ENG TL-232, HOSING, TRANSM. COOLER & FUEL SYS. - CUMMINS ENG TL-231, HOSING, TRANSM. COOLER & FUEL SYS. - DEERE ENG TL-224, HOSING, HYDRAULIC PUMP SUCTION TL-223, HOSING, PRESSURE & RETURN (Ultra Pump & Gresen Valve) TRANSMISSION GROUP TL-103, TRANSMISSION TL-103A, TRANSMISSION, CONVERTER HOUSING GROUP TL-103B, TRANSMISSION, CASE & PLATE GROUP TL-103C, TRANSMISSION, TORQUE CONVERTER GROUP TL-103D, TRANSMISSION, PUMP DRIVE GROUP TL-103E, TRANSMISSION, CHARGING PUMP GROUP TL-103F, TRANSMISSION, REVERSE IDLER GROUP TL-103G, TRANSMISSION, REVERSE SHAFT GROUP TL-103H, TRANSMISSION, 3RD & OUTPUT SHAFT GROUP TL-103J, TRANSMISSION, 1ST & 2ND SHAFT GROUP TL-103K, FLANGE PLUG TL-103L, TRANSMISSION, DISC BRAKE GROUP TL-103M, TRANSMISSION, CONTROL VALVE GROUP TL-103N, TRANSMISSION, DRIVE PLATE GROUP TL-103P, CALIPER BRAKE ASSY. (TRC0167) TL CALL (Continued ARDCO on next page)

4 Copyright 1997 BILL OF MATERIAL TRANSMISSION GROUP (Con t) TL-103Q, CALIPER BRAKE ASSY. (TRC0483) Item TL-239, Part TRANSMISSION No. Qty. Description SHIFTER, 3-SPEED (LPP00213)... Serial No./Date of Change 178 TL-239B, TRANSMISSION SHIFTER (NLP01278) VALVE GROUP TL-120, VALVE GROUP, W/ULTRA PUMP TL-218, VALVE, 6-BANK (APP00806) TL-247, VALVE, JOYSTICK CONTROL (APP00737) TL-068, VALVE, STEERING SELECTOR (NLP00697) TL-081, POWER STEERING MOTOR (LPP19293 Charlynn) TL-201, POWER STEERING MOTOR (APP00723 Danfoss) TL-248, PUMP, MAIN HYDRAULIC, ULTRA (APP00313) TL-120A, FILTER, RETURN LINE (APP00310) ELECTRICAL GROUP TL-205, ELECTRICAL SCHEMATIC, TRANSMISSION & STARTING CIRCUIT TL-206, ELECTRICAL SCHEMATIC, INSTRUMENTS TL CALL ARDCO

5 NOTES TL CALL ARDCO

6 Copyright 1997 BILL OF MATERIAL Item Part No. Qty. Description Serial No./Date of Change NOMENCLATURE TL CALL ARDCO

7 PARTS ORDERING INSTRUCTIONS This manual was prepared as an aid in expediting the acquisition of the exact parts needed for your machine. Every effort has been made to make this manual as complete and accurate as possible. Proper use of the manual will ultimately reflect shorter downtime. Parts orders may be placed with Traverse Lift Parts Distribution Center during regular business hours of 7:00 a.m. to 6:00 p.m. Central Time, Monday through Friday. Orders may be placed by mail, telephone or FAX. Mail orders to: ARDCO/Traverse Lift, L.L.C. Parts Distribution Center 322 Riley Road P.O. Box Houston, TX Phone orders to: or FAX orders to: When ordering, please provide the following information and note the procedures below: 1. Model, serial number and machine hours of the machine. 2. Name of your company and name of person placing the order. 4. Your phone number. 5. Your purchase order number. IMPORTANT: You must fax a hard copy of your purchase order -- with the ship to address and method of shipment clearly noted -- before shipment of your order. 6. Quantity, part number and description of each item. 7. Note whether part is right or left hand by referring to your right or left when operating the machine from the normal operator s seat position. 8. All orders are F.O.B. shipment point, freight collect, via the cheapest means available, unless other arrangements are specified on your purchase order (see Item 5). 9. New parts returned by distributor to the factory must be returned within 30 days after issuance of a RETURN GOODS AUTHORIZATION (RGA) and are subject to a 15% handling charge subtracted from the amount of the parts, unless the parts were sent by mistake from the factory. 10. The order must be checked by you on the day it is received, and the factory must be notified IMMEDIATELY if any parts are missing from the shipment (other than any parts marked backordered ). 11. Warranty parts must be returned by prepaid freight, but only after you have obtained an RGA (RETURN GOODS AUTHORIZATION) from the factory. 12. CONVERSIONS: Circumstances occasionally arise where the factory will offer field replacement, update components or kits for product improvement. It is the responsibility of the customer and/or dealer to document changes made to a particular machine and, if possible, provide the information back to the factory for our records. TL CALL ARDCO

8 Copyright 1997 BILL OF MATERIAL ORGANIZATION OF PUBLICATION ItemThis Parts No. Manual Qty. has been Description designed to assist you in identifying and order Serial replacement No./Date of parts Change for your Traverse Lift equipment. With the exception of the ELECTRICAL GROUP, which is located at the end, this manual is organized alphabetically by major parts groups. Those assemblies and/or individual parts that make up the group then follow in a descending order from greater to lesser. Please see the Table of Contents for location of all components. HOW TO USE THIS MANUAL Determine which major group the replacement component is a part of. Open the manual to the Table of Contents and locate the needed group. Under the group, locate the component that is needed. The page number at the right shows where the needed information is located. Turn to the page number listed and use the illustration to identify the part that is needed. Make a note of the item number that is associated with the part and refer to the ITEM column on the part s BILL OF MATERIAL. The next column ( PART NO. ) gives the Traverse Lift part number needed to place your order. USING THE MANUAL ON CD-ROM To View: Follow the instructions above using the Table of Contents to determine which component is needed. Using the HAND tool, click on the component to go to the drawing. The Bill of Material for the part will be on the page following the drawing. To Print: This manual has been designed to print in a facing-page format so it can be photocopied in its entirety as a double-sided document. In order to maintain this format, some pages contain the notation THIS PAGE INTENTIONALLY LEFT BLANK. To print from the CD-ROM, select FILE, PRINT, then the page(s) desired. TL CALL ARDCO

9 UNDERSTANDING THE BILL OF MATERIAL Whenever a part has been changed on a machine, there will be two parts listed on the parts page under one item number. The first one will be the old part, and the last one will be the new part now being used. Information regarding the date the change took effect will be listed across from the new part number in the SERIAL NO./DATE OF CHANGE column. For example: Item Part No. Qty. Description Serial No./Date of Change 4 BEB BEARING & before 4 BEB BEARING & after NOTE: In cases where there has been only one change, including instances where the part number has been corrected, the item will look like the example below with the date of change being the date the part replaced the one in parenthesis: Item Part No. Qty. Description Serial No./Date of Change 4 BEB BEARING (was BEB-2020) NOTE: In some cases, instead of listing a date of change, the serial number of the machine on which the change took effect will be cited. For example: Item Part No. Qty. Description Serial No./Date of Change 4 BEB BEARING S/N & before 4 BEB BEARING S/N & after Your Traverse Lift machine has been designed to provide you with long, efficient service. In its manufacture, only high quality parts and compoents have been used. ****IMPORTANT**** THE USE OF PARTS OTHER THAN GENUINE TRAVERSE LIFT PARTS OR TRAVERSE LIFT-APPROVED PARTS MAY VOID ANY PRODUCT WARRANTY THAT MAY BE IN EFFECT AT THE TIME OF SUBSTITUTION. TL CALL ARDCO

10 Copyright 1997 ABBREVIATIONS USED IN THIS MANUAL BILL OF MATERIAL AR = As Required Item Part No. Qty. Assy. Description = Assembly Serial No./Date of Change BOM = Bill of Material brg. = bearing cyl. = cylinder dwg. = drawing ft. lbs. = foot pounds ill. or illus. = illustration in. lbs. = inch pounds incl. = includes or including lbs. = pounds LH or lh = Left Hand mtg. = mounting N/A = Not Applicable no. = number N/S = Not Shown (on illustration) NSS = Not Sold Separately opt. = optional pg. = page qt. = quart RH or rh = Right Hand see sep. ill = see separate illustration (located elsewhere in manual) S/N = Serial Number (usually of machine) w/ = with w/o = without ADDITIONAL REFERENCES TO NOTE: In a parts list, when a dotted line appears in the PART NO. column ( ), this means that the item has not been assigned a number and should be ordered by the description given in the next column. References to right hand or left hand in this manual are made from the position of the operator s seat, facing foward.* * On Dana Spicer Axles, left hand and right hand references are determined by looking at pinion on 3rd member, NOT BY LOCATION ON UNIT. TL CALL ARDCO

11 HYDRAULIC PRESSURE WARNING SHEET MODEL TL 8040 WARNING MAXIMUM HYDRAULIC SYSTEM PRESSURE FOR THIS MACHINE IS 3,000 PSI. SETTINGS HIGHER THAN THIS MAY RESULT IN DEATH, SEVERE INJURY OR PROPERTY DAMAGE. In many instances we have learned that the hydraulic relief valves of this equipment have been reset, thereby increasing the maximum pressues and, with this, the load the unit will lift before the relief valve opens. In some instances, the consequences of increasing this setting have been serious. The function of the relief valve is to provide a fuse action to protect the machine and the operator from overloading. When overloaded, different portions of the machine can become stressed to a level at which parts fracture, possibly resulting in death, severe injuyr or property damage. Resetting hydraulic pressures above factory settings is an extremely dangerous practice. Accordingly, you are advised that the settings of these valves are limited to the maximum listed above. Pressure settings in excess of this level render each and all ARDCO/Traverse Lift warranties null and void, and constitute an obvious misuse and abuse of our product. ARDCO/Traverse Lift, L.L.C. TL CALL ARDCO

12 Copyright 1997 BILL OF MATERIAL Item Part No. Qty. Description Serial No./Date of Change AXLE GROUP - FRONT TL CALL ARDCO

13 TL-100 AXLE, FRONT (LPP00248) TL CALL ARDCO

14 Copyright 1997 BILL OF MATERIAL TL-100 AXLE, FRONT (LPP00248) Page 1 of 1 Item Part No. Qty. Description Serial No./Date of Change BOX & COVERS (See drawing TL-100A) 45% L. SLIP DIFFERENTIAL (See drawing TL-100B) HUB REDUCTION R=6.23 (See drawing TL-100C) 10 DISC BRAKE (See drawing TL-100D) INTEGRATED CYLINDER (See drawing TL-100E) OSCILLATING SUPPORT (See drawing TL-100F) TL CALL ARDCO

15 TL-100A AXLE, FRONT, BOX & COVERS TL CALL ARDCO

16 Copyright 1997 BILL OF MATERIAL TL-100A AXLE, FRONT, BOX & COVERS Page 1 of 1 Item Part No. Qty. Description Serial No./Date of Change 1 AXC VENT 2 AXC COVER, INTERMEDIATE 3 AXC O-RING 4 AXC O-RING 5 AXC HOUSING 6 AXC PLUG, MAGNET 7 AXC PLUG 8 AXC PLUG 9 AXC CIRCLIP 10 AXC ADAPTOR TL CALL ARDCO

17 TL-100B AXLE, FRONT, 45% L. SLIP DIFFERENTIAL TL CALL ARDCO

18 Copyright 1997 BILL OF MATERIAL TL-100B AXLE, FRONT, 45% L. SLOPE DIFFERENTIAL Page 1 of 1 Item Part No. Qty. Description Serial No./Date of Change 1 AXC BOLT, HEXAGON 2 AXC SHET 3 AXC NUT, RING 4 AXC BEARING, ROLLER, TAPER 5 AXC CARRIER, DIFFERENTIAL 6 AXC SHIM,.10 MM N/S AXC SHIM,.20 MM N/S AXC SHIM,.30 MM 7 AXC DISC 8 AXC GEAR SET, BEVEL 9 AXC DISC 10 AXC GEAR, DIFFERENTIAL SIDE 11 AXC RETAINER, SHAFT 12 AXC WASHER, FRICTION 13 AXC PIN 14 AXC PIN, ROLL 15 AXC BOLT, HEXAGON 16 AXC WASHER, SPRING 17 AXC COVER 18 AXC DISC 19 AXC PINION, DIFFERENTIAL 20 AXC BEARING, ROLLER, TAPER 21 AXC SHIM,.20 MM N/S AXC SHIM,.25 MM N/S AXC SHIM,.30 MM N/S AXC SHIM,.35 MM 22 AXC SHIM,.35 MM N/S AXC SHIM,.40 MM N/S AXC SHIM,.45 MM N/S AXC SHIM,.55 MM N/S AXC SHIM,.50 MM N/S AXC SHIM,.60 MM 23 AXC NUT, RING 24 AXC COVERPLATE 25 AXC NUT 26 AXC O-RING 27 AXC FLANGE 28 AXC SEAL 29 AXC SPACER 30 AXC BOLT, HEXAGON 31 AXC PIN TL CALL ARDCO

19 TL-100C AXLE, FRONT, HUB REDUCTION R=6.23 TL CALL ARDCO

20 Copyright 1997 BILL OF MATERIAL TL-100C AXLE, FRONT, HUB REDUCTION R=6.23 Page 1 of 2 Item Part No. Qty. Description Serial No./Date of Change 1 AXC CASE, AXLE 2 AXC BOLT, GRUB 3 AXC NUT 4 AXC FITTING, GREASE 5 AXC BOLT, HEXAGON 6 AXC WASHER, SPRING 7 AXC PIN, PIVOT 8 AXC SHIM,.10 MM N/S AXC SHIM,.15 MM N/S AXC SHIM,.50 MM 9 AXC SEAL 10 AXC BEARNG, ROLLER, TAPER 11 AXC CASE, STEERING, RH (From Operator s Seat) 12 AXC CASE, STEERING, LH (From Operator s Seat) 14 AXC O-RING 15 AXC SEAL 16 AXC SPACER 17 AXC BEARING, ROLLER, TAPER 18 AXC HUB, WHEEL 19 AXC STUD, WHEEL 20 AXC NUT 21 AXC O-RING 22 AXC GEAR, RING 23 AXC BOLT, HEXAGON after AXC PLATE, LOCKING no longer used as replacement, AXC SUPPORT, RING GEAR 26 AXC DOWEL after AXC RING, SNAP 28 AXC SHIM,.15 MM N/S AXC SHIM,.20 MM N/S AXC SHIM,.50 MM N/S AXC (use 1 each items AXC0040 & AXC0160) N/S AXC SHIM,.30 MM 29 AXC RING, SNAP 30 AXC WASHER, FRICTION 31 AXC GEAR, PLANET 32 AXC BEARING, NEEDLE 33 AXC PIN 34 AXC O-RING 35 AXC BOLT, CYLINDER 36 AXC PLUG 37 AXC WASHER, SEAL TL CALL ARDCO

21 TL-100C AXLE, FRONT, HUB REDUCTION R= TL CALL ARDCO

22 Copyright 1997 BILL OF MATERIAL TL-100C AXLE, FRONT, HUB REDUCTION R=6.23 Page 2 of 2 Item Part No. Qty. Description Serial No./Date of Change 38 AXC CARRIER, PLANET GEAR 39 AXC WASHER, FRICTION 40 AXC DOWEL 41 AXC PINION 42 AXC WASHER, FRICTION 43 AXC PLATE, LOCKING 44 AXC BOLT, HEXAGON 45 AXC BEARING, NEEDLE 46 AXC RING, SNAP 47 AXC SEAL 48 AXC EXCLUDER, DUST 49 AXC STUD 50 AXC JOINT 51 AXC PLUG 52 AXC STUD* AXC0165 BOLT* 53 AXC O-RING 54 AXC BUSHING, REDUCTION 55 AXC SEAL 56 AXC BEARING, BALL 57 AXC CIRCLIP 58 AXC CIRCLIP 59 AXC PIN, PIVOT 60 AXC BEARING, ROLLER, TAPER 61 AXC BOLT, ADJUSTING 62 AXC NUT 63 AXC NUT *Verify type before ordering TL CALL ARDCO

23 TL-100D AXLE, FRONT, 10 DISCS BRAKE 31 TL CALL ARDCO

24 Copyright 1997 BILL OF MATERIAL TL-100D AXLE, FRONT, 10 DISC BRAKE Page 1 of 1 Item Part No. Qty. Description Serial No./Date of Change 1 AXC BOLT, ADJUSTING 2 AXC SPRING 3 AXC LOCKWASHER 4 AXC NUT 5 AXC PLUG 6 AXC BOLT, BLEEDING 7 AXC DISC, BRAKE-INTERMEDIATE 8 AXC DISC, BRAKE 9 AXC DISC 10 AXC DISC 11 AXC O-RING 12 AXC RING, BACKUP Corrected 10/1/04 13 AXC PISTON TL CALL ARDCO

25 TL-100E AXLE, FRONT, INTEGRATED CYLINDER TL CALL ARDCO

26 Copyright 1997 BILL OF MATERIAL TL-100E AXLE, FRONT, INTEGRATED CYLINDER Page 1 of 1 Item Part No. Qty. Description Serial No./Date of Change 1 AXC ROD, TIE, ARTICULATED 2 AXC CYLINDER 3 AXC BOLT, CYLINDER 4 AXC O-RING N/S AXC KIT, SEAL, FOR STEERING CYLINDER added to BOM TL CALL ARDCO

27 TL-100F AXLE, FRONT, OSCILLATING SUPPORT TL CALL ARDCO

28 Copyright 1997 BILL OF MATERIAL TL-100F AXLE, FRONT, OSCILLATING SUPPORT Page 1 of 1 Item Part No. Qty. Description Serial No./Date of Change 1 AXC BUSHING, REDUCTION 2 AXC BUSHING, THRUST 3 AXC SUPPORT 4 AXC FITTING, GREASE TL CALL ARDCO

29 THIS PAGE INTENTIONALLY LEFT BLANK TL CALL ARDCO

30 Copyright 1997 BILL OF MATERIAL Item Part No. Qty. Description Serial No./Date of Change AXLE GROUP - REAR TL CALL ARDCO

31 TL-101 AXLE, REAR (LPP00249) TL CALL ARDCO

32 Copyright 1997 BILL OF MATERIAL TL-101 AXLE, REAR (LPP00249) Page 1 of 1 Item Part No. Qty. Description Serial No./Date of Change BOX AND COVERS (See drawing TL-101A) 45% L. SLIP DIFFERENTIAL (See drawing TL-101B) HUB REDUCTION R=6.23 (See drawing TL101C) 10 DISCS BRAKE (See drawing TL-101D) INTEGRATED CYLINDER (See drawing TL101E) OSCILLATING SUPPORT (See drawing TL101F) TL CALL ARDCO

33 TL-101A AXLE, REAR, BOX & COVERS TL CALL ARDCO

34 Copyright 1997 BILL OF MATERIAL TL-101A AXLE, REAR, BOX & COVERS Page 1 of 1 Item Part No. Qty. Description Serial No./Date of Change 1 AXC PLUG 2 AXC COVER, INTERMEDIATE 3 AXC O-RING 4 AXC O-RING 5 AXC HOUSING 6 AXC PLUG 7 AXC CIRCLIP 8 AXC PLUG, MAGNET 9 AXC VENT 10 AXC ADAPTER TL CALL ARDCO

35 TL-101B AXLE, REAR, DIFFERENTIAL W/O BLOCK TL CALL ARDCO

36 Copyright 1997 BILL OF MATERIAL TL-101B AXLE, REAR, DIFFERENTIAL W/O BLOCK Page 1 of 1 Item Part No. Qty. Description Serial No./Date of Change 1 AXC BOLT, HEXAGON 2 AXC SHEET 3 AXC NUT, RING 4 AXC BEARING, RILLER, TAPER 5 AXC CARRIER, DIFFERENTIAL 6 AXC GEAR SET, BEVEL 7 AXC WASHER 8 AXC PINION, DIFFEENTIAL 9 AXC WASHER, FRICTION 10 AXC PIN 11 AXC PIN, ROLL 12 AXC GEAR, DIFFERENTIAL SIDE 13 AXC BOLT, HEXAGON 14 AXC COVER 15 AXC PIN 16 AXC BEARING, ROLLER, TAPER 17 AXC SHIM,.20 MM N/S AXC SHIM,.25 MM N/S AXC SHIM,.30 MM N/S AXC SHIM,.35 MM 18 AXC SHIM,.35 MM N/S AXC SHIM,.40 MM N/S AXC SHIM,.45 MM N/S AXC SHIM,.55 MM N/S AXC SHIM,.50 MM N/S AXC SHIM,.60 MM 19 AXC SEAL 20 AXC COVERPLATE 21 AXC FLANGE 22 AXC O-RING 23 AXC NUT 24 AXC NUT, RING 25 AXC SPACER 26 AXC WASHER, SPRING 27 AXC BOLT, HEXAGON 28 AXC RETAINER, SHAFT TL CALL ARDCO

37 TL-101C AXLE, REAR, HUB REDUCTION R=6.23 TL CALL ARDCO

38 Copyright 1997 BILL OF MATERIAL TL-101C AXLE, REAR, HUB REDUCTION R=6.23 Page 1 of 2 Item Part No. Qty. Description Serial No./Date of Change 1 AXC CASE, AXLE 2 AXC BOLT, GRUB 3 AXC NUT 4 AXC PIN, PIVOT 5 AXC FITTING, GREASE 6 AXC BOLT, HEXAGON 7 AXC SHIM,.10 MM N/S AXC SHIM,.25 MM N/S AXC SHIM,.50 MM 8 AXC EXCLUDER, DUST 9 AXC RING 10 AXC BEARING, ROLLER, TAPER 11 AXC CASE, STEERING, RH (From Operator s seat) 12 AXC CASE, STEERING, LH (From Operator s seat) 13 AXC O-RING 14 AXC SEAL 15 AXC SPACER 16 AXC BEARING, ROLLER, TAPER 17 AXC STUD, WHEEL 18 AXC NUT 19 AXC RING, SNAP 20 AXC087 2 SUPPORT, RING GEAR 21 AXC BOLT, HEXAGON 22 AXC PLATE, LOCKING 23 AXC CARRIER, PLANET GEAR 24 AXC WASHER, FRICTION 25 AXC GEAR, PLANET 26 AXC BEARING, NEEDLE 27 AXC RING, SNAP 28 AXC PIN 29 AXC WASHER, SEAL 30 AXC PLUG 31 AXC BOLT, CYLINDER 32 AXC O-RING 33 AXC WASHER, FRICTION 34 AXC DOWEL 35 AXC BOLT, HEXAGON AXC0126 PLATE, LOCKING No longer used as replacement, AXC DOWEL AXC GEAR, RING 39 AXC SHIM,.15 MM N/S AXC SHIM,.20 MM N/S AXC SHIM,.50 MM N/S AXC SHIM,.25 MM -- USE ONE (1) EACH AXC0160 & AXC0040 TL CALL ARDCO

39 TL-101C AXLE, REAR, HUB REDUCTION R=6.23 TL CALL ARDCO

40 Copyright 1997 BILL OF MATERIAL TL-101C AXLE, REAR, HUB REDUCTION R=6.23 Page 2 of 2 Item Part No. Qty. Description Serial No./Date of Change 40 AXC O-RING 41 AXC HUB, WHEEL 42 AXC PINION 43 AXC WASHER, FRICTION 44 AXC BEARING, NEEDLE 45 AXC RING, SNAP 46 AXC SEAL 47 AXC EXCLUDER, DUST 48 AXC JOINT 49 AXC O-RING 50 AXC BUSHING, REDUCTION 51 AXC SEAL 52 AXC BEARING, BALL 53 AXC CIRCLIP 54 AXC CIRCLIP 55 AXC BOLT, ADJUSTING 56 AXC NUT 57 AXC NUT 58 AXC STUD* AXC0165 BOLT* 59 AXC PLUG 60 AXC STUD * Verify type before ordering TL CALL ARDCO

41 TL-101D AXLE, REAR, 10 DISCS BRAKE TL CALL ARDCO

42 Copyright 1997 BILL OF MATERIAL TL-101D AXLE, REAR 10 DISCS BRAKE Page 1 of 1 Item Part No. Qty. Description Serial No./Date of Change 1 AXC BOLT, ADJUSTING 2 AXC SPRING 3 AXC WASHER, LOCK 4 AXC NUT 5 AXC PLUG 6 AXC BOLT, BLEEDING 7 AXC DISC, BRAKE - INTERMEDIATE 8 AXC DISC, BRAKE 9 AXC DISC 10 AXC DISC 11 AXC O-RING 12 AXC RING, BACKUP 13 AXC PISTON TL CALL ARDCO

43 TL-101E AXLE, REAR, INTEGRATED CYLINDER TL CALL ARDCO

44 Copyright 1997 BILL OF MATERIAL TL-101E AXLE, REAR, INTEGRATED CYLINDER Page 1 of 1 Item Part No. Qty. Description Serial No./Date of Change 1 AXC ROD, TIE, ARTICULATED 2 AXC CYLINDER 3 AXC O-RING 4 AXC BOLT, CYLINDER N/S AXC KIT, SEAL FOR STEERING CYLINDER TL CALL ARDCO

45 TL-101F AXLE, REAR, OSCILLATING SUPPORT TL CALL ARDCO

46 Copyright 1997 BILL OF MATERIAL TL-101F AXLE, REAR, OSCILLATING SUPPORT Page 1 of 1 Item Part No. Qty. Description Serial No./Date of Change 1 AXC BUSHING, REDUCTION 2 AXC090 2 BUSHING, THRUST 3 AXC SUPPORT 4 AXC FITTING, GREASE TL CALL ARDCO

47 THIS PAGE INTENTIONALLY LEFT BLANK TL CALL ARDCO

48 Copyright 1997 BILL OF MATERIAL Item Part No. Qty. Description Serial No./Date of Change DECAL GROUP TL CALL ARDCO

49 TL-241 KIT, DECAL (APP00838) N F R TL CALL ARDCO

50 Copyright 1997 BILL OF MATERIAL TL-241 KIT, DECAL (APP00838) Page 1 of 4 Item Part No. Qty. Description Serial No./Date of Change 1 APP DECAL, STRIPING (2-9/16 X 36 ) 2 APP DECAL, STEERING SELECTOR 3 APP DECAL, PARKING BRAKE 4 APP DECAL, SHIFT LOCK 5 APP DECAL, OWNER S / OPERATOR S MANUAL 6 APP DECAL, TRANSMISSION SELECT 7 DEC DECAL, LOW BRAKE PRESSURE 8 DEC DECAL, PARKING BRAKE (LIGHT) 9 DEC DECAL, FASTEN SEAT BELT 13 LPP DECAL, BOOM ANGLE INDICATOR 14 LPXL DECAL, JOYSTICK, BOOM 15 LPXL DECAL, JOYSTICK, FORK TL CALL ARDCO

51 TL-241 KIT, DECAL (APP00838) cm cm DO NOT OPERATE MACHINE WHEN LOW BRAKE PRESSURE LIGHT IS ON TL CALL ARDCO

52 Copyright 1997 BILL OF MATERIAL TL-241 KIT, DECAL (APP00838) Page 2 of 4 Item Part No. Qty. Description Serial No./Date of Change 16 LPP DECAL, MADE IN AMERICA 17 LPP DECAL, FRAME TRAVEL LOCATION 18 LPP DECAL, LARGE ARROW 19 MI SIGN, LOW MOVING VEHICLE NAPA LPP DECAL, BRAKE PRESSURE WARNING 21 NLP DECAL WELDING & MODIFICATION HAZARD 22 NLP DECAL, HYDRAULIC OIL ONLY 23 NLP DECAL, DIESEL FUEL ONLY 24 NLP DECAL, COMBUSTIBLE & FLAMMABLE FLUIDS 25 NLP DECAL, MACHINE ROLL AWAY 26 NLP DECAL, PRE-START MAINTENANCE CHECKLIST 27 NLP DECAL, SAFE OPERATION CHECKLIST 28 NLP DECAL, ELECTROCUTION HAZARD 29 NLP DECAL, EXPLOSION HAZARD TL CALL ARDCO

53 TL-241 KIT, DECAL (APP00838) TL CALL ARDCO

54 Copyright 1997 BILL OF MATERIAL TL-241 KIT, DECAL (APP00838) Page 3 of 4 Item Part No. Qty. Description Serial No./Date of Change 30 NLP DECAL, HOT & PRESSURIZED FLUID 31 NLP DECAL, PERSONAL INJURY HAZARDS 32 NLP DECAL, FALLING BOOM OR LOAD 33 NLP DECAL, NO RIDING 34 NLP DECAL, BACKWARD TIP-OVER HAZARD 35 NLP DECAL, CARRYING PERSONNEL 36 NLP DECAL, MOVING BELTS & SPINNING BLADES 37 NLP DECAL, NO STEP 38 NLP DECAL, CARBON MONOXIDE 40 NLP DECAL, PINCH POINT 41 NLP DECAL, INADEQUATE BRAKING ABILITY 42 NLP DECAL, HOT EXHAUST PIPE 43 NLP DECAL, NO RIDING 44 NLP DECAL, HIGH PRESSURE HYDRAULIC FLUID TL CALL ARDCO

55 TL-241 KIT, DECAL (APP00838) 50 I 46 A B C , 49 TL CALL ARDCO

56 Copyright 1997 BILL OF MATERIAL TL-241 KIT, DECAL (APP00838) Page 4 of 4 Item Part No. Qty. Description Serial No./Date of Change 45 NLP DECAL, MACHINE TIPOVER 46 APP DECAL, TRAVERSE LIFT 47 APP DECAL, LIFT CAPACITY (TL8040) 48 APP DECAL, 8040 LEFT 49 APP DECAL, 8040 RIGHT 50 APP DECAL, BOOM EXT. INDICATOR (4 PC/SET) plus N/S APP DECAL, BOOM EXT. INDICATOR (1 PC/SET) TL CALL ARDCO

57 THIS PAGE INTENTIONALLY LEFT BLANK TL CALL ARDCO

58 Copyright 1997 BILL OF MATERIAL Item Part No. Qty. Description Serial No./Date of Change DRIVELINE GROUP TL CALL ARDCO

59 TL-197 DRIVELINE ASSEMBLY TL CALL ARDCO

60 Copyright 1997 BILL OF MATERIAL TL-197 DRIVELINE ASSEMBLY Page 1 of 1 Item Part No. Qty. Description Serial No./Date of Change 1 APP TIRE, X PLY 2 APP WHEEL, 9 X 24 3 LPP AXLE, FRONT 4 LPP AXLE, REAR 5 LPAF18435B 1 BRACKET, FRAME LEVEL MOUNTING 6 LPAD19500B 1 ASSEMBLY, DRIVESHAFT, FRONT 7 DSM U-JOINT 8 LPAD19500B 1 WELDMENT, DRIVESHAFT, FRONT 9 DSM YOKE, SLIP 10 LPAD18458B 1 ASSEMBLY, DRIVESHAFT, REAR 11 DSM U-JOINT 12 LPAD18458B 1 WELDMENT, DRIVEHAFT, REAR 13 DSM YOKE, SLIP TL CALL ARDCO

61 THIS PAGE INTENTIONALLY LEFT BLANK TL CALL ARDCO

62 Copyright 1997 BILL OF MATERIAL Item Part No. Qty. Description Serial No./Date of Change ENGINE GROUP TL CALL ARDCO

63 TL-242 AIR INTAKE ASSEMBLY (CUMMINS ENG.) TL CALL ARDCO

64 Copyright 1997 BILL OF MATERIAL TL-242 AIR INTAKE ASSEMBLY (CUMMINS ENG.) Page 1 of 1 Item Part No. Qty. Description Serial No./Date of Change BOLT, HEX, MOUNTING, 5/16-18 UNC X 1 LG LOCKWASHER, 5/ MIY ELBOW, 90-DEGREE 4 MIW CLAMP, 2-9/16-3-1/2 5 ENE TUBIN, ALUMINIZED, 3 DIA. X 15 LONG 6 LPP CLEANER, AIR 7 FIF CLAMP, MOUNTING 8 LPP CAP, AIR STACK 9 LPP SERVICE INDICATOR 10 FIF VALVE, DUST 11 MIY HOSE, HUMP 12 ENE TUBING, ALUMINIZED, 3 DIA. X 3 LONG N/S FIF ELEMENT, FILTER TL CALL ARDCO

65 TL-194 AIR INTAKE ASSEMBLY (JOHN DEERE ENG.) TL CALL ARDCO

66 Copyright 1997 BILL OF MATERIAL TL-194 AIR INTAKE ASSEMBLY (JOHN DEERE ENG.) Page 1 of 1 Item Part No. Qty. Description Serial No./Date of Change BOLT, HEX, MOUNTING, 5/16-18 UNC X 1 LG LOCKWASHER, 5/ MIY ELBOW, 90-DEGREE 4 MIW CLAMP, 2-9/16-3-1/2 5 ENE TUBING, ALUMINIZED, 3 DIA. X 15 LONG 6 LPP CLEANER, AIR 7 FIF CLAMP, MOUNTING 8 LPP CAP, AIR STACK 9 LPP SERVICE INDICATOR 10 FIF VALVE, DUST N/S FIF ELEMENT, FILTER TL CALL ARDCO

67 TL-207 ENGINE ACCESSORIES (CUMMINS ENG.) NO DRAWING AVAILABLE TL CALL ARDCO

68 Copyright 1997 BILL OF MATERIAL TL-207 ENGINE ACCESSORIES (CUMMINS ENG.) Page 1 of 1 Item Part No. Qty. Description Serial No./Date of Change ENC ALTERNATOR ENC FILTER, PRIMARY FUEL ENC FILTER, SECONDARY FUEL ENC STARTER ENC PAN, OIL ENC FILTER, LUBE ENC BELT, FAN ENC PUMP, FUEL INJECTION ENC FLYWHEEL ENC FAN ENC SPACER, FAN APP00309 ENGINE, CUMMINS (TURBO) TL CALL ARDCO

69 TL-246 ENGINE ACCESSORIES (JOHN DEERE ENG.) TL CALL ARDCO

70 Copyright 1997 BILL OF MATERIAL TL-246 ENGINE ACCESSORIES (JOHN DEERE ENG.) Page 1 of 1 Item Part No. Qty. Description Serial No./Date of Change 1 ENV ALTERNATOR 2 ENV FILTER, FUEL (was ENV0021) ENV MOTOR, STARTER 4 ENV DIPSTICK 5 ENV PAN, OIL 6 ENV GASKET, OIL PAN 7 ENV FILTER, OIL 8 ENV BELT, FAN 9 ENV PUMP, FUEL INJECTION 10 ENV FLYWHEEL / TORQUE CONVERTER, ENGINE APP ENGINE, JOHN DEERE (TURBO) TL CALL ARDCO

71 TL-245 EXHAUST ASSEMBLY (CUMMINS ENG.) TL CALL ARDCO

72 Copyright 1997 BILL OF MATERIAL TL-245 EXHAUST ASSEMBLY (CUMMINS ENG.) Page 1 of 1 Item Part No. Qty. Description Serial No./Date of Change 1 LPAE WELDMENT, EXHAUST PIPE, FLANGE SECTION ENC FLANGE, EXHAUST (N.S.S. -- included with item #1) 2 LPP CONNECTOR, FLEX 3 LPAE19334B 1 WELDMENT, EXHAUST PIPE, FLANGE SECTION 4 EN WELDMENT, MUFFLER 5 LPAE17927B 1 TAIL PIPE 6 MIY CLAMP, 3 MUFFLER 7 ENC CLAMP, EXHAUST FLANGE BOLT, HEX, 3/8 UNC X 3/4 LG NUT, HEX, 3/8 UNC WASHER, 3/8 11 MIY CLAMP, MUFFLER BAND, 3 12 FIF BAND, MOUNTING TL CALL ARDCO

73 TL-217 EXHAUST ASSEMBLY (JOHN DEERE ENG.) TL CALL ARDCO

74 Copyright 1997 BILL OF MATERIAL TL-217 EXHAUST ASSEMBLY (JOHN DEERE ENG.) Page 1 of 1 Item Part No. Qty. Description Serial No./Date of Change 1 LPAE19332B 1 WELDMENT, EXHAUST PIPE, FLANGE SECTION EN FLANGE EXHAUST (N.S.S. -- Included with item #1) 2 LPP CONNECTOR, FLEX 3 LPAE19334B 1 WELDMENT, EXHAUST PIPE SECTION 4 EN WELDMENT, MUFFLER 5 LPAE17927B 1 TAIL PIPE 6 MIY CLAMP, 3 MUFFLER 7 EN CLAMP, EXHAUST FLANGE BOLT, HEX, 3/8 UNC X 3/4 LONG NUT, HEX, 3/8 UNC WASHER, 3/8 11 MIY CLAMP, MUFFLER BAND, 3 12 FIF BAND, MOUNTING TL CALL ARDCO

75 TL-123 RADIATOR ASSEMBLY (CUMMINS ENG.) TL CALL ARDCO

76 Copyright 1997 BILL OF MATERIAL TL-123 RADIATOR ASSEMBLY (CUMMINS ENG.) Page 1 of 1 Item Part No. Qty. Description Serial No./Date of Change 1 LPP BLOCK, RUBBER 2 LPP COOLER, TRANSMISSION 3 APP RADIATOR W/SHROUD & FAN GUARD 4 ENR HOSE, UPPER RADIATOR 5 ENC BLADE, FAN 6 ENC SPACER, FAN 7 ENG HOSE, LOWER RADIATOR TL CALL ARDCO

77 TL-195 RADIATOR ASSEMBLY (JOHN DEERE ENG.) TL CALL ARDCO

78 Copyright 1997 BILL OF MATERIAL TL-195 RADIATOR ASSEMBLY (JOHN DEERE ENG.) Page 1 of 1 Item Part No. Qty. Description Serial No./Date of Change 1 LPP BLOCK, RUBBER 2 LPP COOLER, TRANSMISSION 3 APP RADIATOR W/SHROUD & FAN GUARD 4 LPP HOSE, UPPER 5 ENV FAN 6 LPP SPACER, FAN 7 LPP HOSE, LOWER TL CALL ARDCO

79 THIS PAGE INTENTIONALLY LEFT BLANK TL CALL ARDCO

80 Copyright 1997 BILL OF MATERIAL Item Part No. Qty. Description Serial No./Date of Change FRAME GROUP TL CALL ARDCO

81 TL-202 CARRIAGE ASSEMBLY TL CALL ARDCO

82 Copyright 1997 BILL OF MATERIAL TL-202 CARRIAGE ASSEMBLY Page 1 of 1 Item Part No. Qty. Description Serial No./Date of Change 1 LPAC19300D 1 WELDMENT, CARRIAGE 2 LPP BUSHING, BOOM PIVOT 3 LPAP18235B 1 PIN, MAIN PIVOT, OUTER BOOM 4 LPAS AR SPACER, 1/4, OUTER BOOM, MT PIVOT 5 LPAS AR SPACER, 14 GA., OUTER BOOM, MT PIVOT 6 LPAS AR SPACER, 18 GA., OUTER BOOM, MT PIVOT 7 APP CYLINDER, SLAVE 8 LPAP18332B 1 PIN, SLAVE CYLINDER, BASE END 9 BEM BEARING, CAM ROLLER 10 HWZ NUT, NYLOCK, 1-1/8-20, GRADE 8 11 LPAP17407B 2 PIN, CARRIAGE ROLLER 12 LPAP18391B 2 PIN, REAR CARRIAGE ROLLER 13 LPAC17432BP 4 ROLLER, CARRIAGE BOOM 14 LPP BUSHING, ROLLER 15 LPAS AR SPACER,.125 THK, INSIDE ROLLER, MAST(was LPAS ) LPAS AR SPACER, 14 GA., INSIDE ROLLER, MAST (was LPAS ) LPAS AR SPACER, 18 GA. INSIDE ROLLER, MAST (was LPAS ) LPAC B 4 TUBE, 3/4 DIAMETER NUT, 12 FT. TO 12 ML or 18 LPAC B 4 TUBE, 1/2 DIAMETER NUT, 8 FT. TO 8 ML 19 LPAP17555B 1 PIN, SLAVE CYLINDER, ROD END added to BOM HWZ NUT, 1-1/2-12 G-8 JAM added to BOM LPAF18725B 4 CLIP, FOR JAM NUT added to BOM LPAP18377B 1 PIN, HOIST CYLINDER added to BOM LPP NUT, 2 NYLOCK TL CALL ARDCO

83 TL-203 BOOM ASSEMBLY TL CALL ARDCO

84 Copyright 1997 BILL OF MATERIAL TL-203 BOOM ASSEMBLY Page 1 of 1 Item Part No. Qty. Description Serial No./Date of Change 1 LPAB19100D 1 WELDMENT, INNER BOOM 2 LPAB19200D 1 WELDMENT, OUTER BOOM 3 LPAP18244B 2 PIN, FRONT ROLLER 4 LPAS AR SPACER,.125 THK, BOOM ROLLER (was LPAS ) LPAS AR SPACER, 14 GA., BOOM ROLLER (was LPAS ) LPAS AR SPACER, 18 GA. BOOM ROLLER (was LPAS ) LPAC17432BP 2 ROLLER, CARRIAGE BOOM 8 LPP BUSHING, ROLLER 9 LPAB B 1 PLATE, BOOM SLIDER, NYLATORN (WEAR PAD) 10 LPAB B 1 PLATE, BOOM SLIDER, 1/2 PL/THK (MTG BRACKET) 11 LPAB B 1 PLATE, BOOM SLIDER, 1/4 GA. (SHIM) 12 LPAB18239B 1 BRACKET, REAR BOOM CYLINDER, OUTER BOOM 13 LPAB17842B 1 BULKHEAD, HOSE, OUTER BOOM 14 LPAP18377B 1 PIN, HOIST CYLINDER ROD END added to BOM LPP NUT, 2 NYLOCK added to BOM TL CALL ARDCO

85 TL-204 INNER BOOM ASSEMBLY TL CALL ARDCO

86 Copyright 1997 BILL OF MATERIAL TL-204 INNER BOOM ASSEMBLY Page 1 of 1 Item Part No. Qty. Description Serial No./Date of Change 1 LPAP17343B 1 PIN, REAR, INNER BOOM ROLLER 2 LPAS AR SPACER,.125 THK, BOOM ROLLER (was LPAS ) LPAS AR SPACER, 14 GA., BOOM ROLLER (was LPAS ) LPAS AR SPACER, 18 GA. BOOM ROLLER (was LPAS ) LPAC17432BP 2 ROLLER, CARRIAGE BOOM, H-TREATED 4 LPP BUSHING, ROLLLER 6 LPAB19100D 1 WELDMENT, INNER BOOM 7 APP CYLINDER, BOOM EXTEND 8 LPP NUT, 1-1/2-12 UNF, NY-LOCK, G-8 FULL NUT 9 LPAP18129B 1 PIN, FORK CYLINDER-BASE END, INNER BOOM 10 LPAB17365B 1 CLAMP, HOSE 11 LPP CYLINDER, FORK TILT, CARRIAGE 12 LPP BUSHING, 2.50 OD X 2.0 ID X 2.5 LG. 13 LPAS18281B AR SHIM, BOOM EXTEND CYLINDER 14 LPAC17332B 1 BRACKET, CYLINDER MTG. (WEAR PAD) 15 APP TRACK, HOSE, 11.5 FT. W/BRACKET FOR AUXILIARY UNITS 15 APP TRACK HOSE, 11.5 FT. W/BRACKET FOR NON-AUXILIARY UNITS 16 LPAB17336-B 2 PLATE, 1/2 THK., NYLATRON (was LPAB B LPAB B AR PLATE, 1/8 THK., BOOM SLIDE 17 LPAB B AR PLATE, 14 GA., BOOM SLIDE 18 See below Upper & Lower Boom Tubes as Follows: LPAC19814B 2 TUBE, UPPER, 1/2 DIA. X.065 WALL X 202 LG. HTP SLEEVE, 1/2, FLARE TUBE END HTP NUT, FLARE TUBE, #8 LPAC19815B 2 TUBE, LOWER, 1/2 DIA. X.065 WALL X 202 LG. HTP SLEEVE, 1/2, FLARE TUBE END HTP NUT, FLARE TUBE, #8 TL CALL ARDCO

87 TL-221 FORK ROTATE CARRIAGE ASSEMBLY TL CALL ARDCO

88 Copyright 1997 BILL OF MATERIAL TL-221 FORK ROTATE CARRIAGE ASSEMBLY Page 1 of 1 Item Part No. Qty. Description Serial No./Date of Change 1 HF ADAPTER, QUICK DISCONNECT 2 HF PLUG, DUST 3 HFP ADAPTER 4 APP HOSE, 60 LONG 5 APP HOSE, 58 LONG 6 HFW ELBOW, 90-DEG BOLT, 7/16-14 X 2-3/4 LONG LOCKNUT, 7/ LPAS SPACER, FORK TILT CYLINDER 10 LPP CYLINDER, FORK ROTATE BOLT, 1/4-20 X 2 LONG LOCKNUT, 1/ LPAP17632B 1 PIN, TOP CYLINDER MOUNT 14 LPXL D 1 WELDMENT, TILT MOUNT 15 LPXL WELDMENT, WIDE TILT CARRIAGE 15 LPXL6013D 1 WELDMENT, NARROW TILT CARRIAGE N/S LPXL BUSHING, CARRIAGE PIVOT (REPLACEABLE) 16 LPAC17578B 1 BOSS, WITH HOLE, FORK CARRRIAGE 17 LPAC17575B 1 ASSEMBLY, SHAFT, WIDE TILT CARRIAGE 17 LPAC17576B 1 ASSEMBLY, SHAFT, NARROW TILT CARRIAGE 18 LPAC17634B 1 WASHER, PIVOT PIN 19 LPP NUT, LOCKING, NUT 1-3/4 NF FITTING, GREASE, 1/8 MALE PIPE BOLT, 1/2-13 X 3-1/2 LONG LOCKNUT, 1/ LPP BUSHING added to BOM TL CALL ARDCO

89 TL-111 QUICK DISCONNECT TL CALL ARDCO

90 Copyright 1997 BILL OF MATERIAL TL-111 QUICK DISCONNECT Page 1 of 1 Item Part No. Qty. Description Serial No./Date of Change 1 LPXL LINK BAR 2 LPXL LATCH 3 LPXL LEVER 4 LPXL PIN, LINKAGE 5 LPXL CAM ASSEMBLY 6 LPXL PIN 7 LPXL PIN, TILT CYLINDER 8 LPXL PIN, QUICK DISCONNECT SPRING, 1/2, PIN 10 MIS SNAP RING SCREW, SHOULDER, 3/8 DIA X 5/16-18 TH D X 1 LG GREASE ZERK, 1/8 13 MIS KLIP RING TL CALL ARDCO

91 TL-236 OPERATOR S COMPARTMENT TL CALL ARDCO

92 Copyright 1997 BILL OF MATERIAL TL-236 OPERATOR S COMPARTMENT Page 1 of 1 Item Part No. Qty. Description Serial No./Date of Change 1 LPP BUZZER, EMERGENCY BRAKE 2 LPP BUZZER, LOW BRAKE 3 NLP VALVE, SELECTOR STEERING 4 NLP SHIFTER, TRANSMISSION (was LPP00213) NLP INCLINOMETER 6 LPP KIT, HORN BUTTON 7 LPP HEEL, STEERING W/O HORN 8 LPP GAUGE, HOUR METER 9 LPP GAUGE, WATER TEMPERATURE 10 LPP GAUGE, VOLT METER 11 LPP HANDLE, BRAKE LEVER W/SWITCH N/S BRV CABLE, BRAKE added to BOM N/S EN SWITCH, ADJUSTABLE FOR BRAKE HANDLE added to BOM APP GAUGE, TRANSMISSION TEMPERATURE 13 LPP GAUGE, FUEL 14 LPP GAUGE, OIL PRESSURE (used with John Deere engine) 14 APP GAUGE, OIL PRESURE (used with Cummins engine) 15 LPAC18519B 1 PANEL, GAUE - PLASTIC 16 LPAD18525B 1 PANEL, DASH ACCESS. 17 LPP BRAKE PEDAL VALVE ASSY. (was APP00291) EN PEDAL, ACCELERATOR 19 NLP SWITCH, IGNITION (was EN80077) LPPAC18521B 1 PANEL BLANK (PLASTIC) 21 LPAC18888C 1 PLATE, MOUNTING, PRIMARY JOYSTICK 22 NLP ARMREST 23 LPAM18531B 1 BRACKET, MOUNTING, JOYSTICK ARMREST 24 LPP SEAT 25 APP BELT, SEAT 26 LPAM18523C 1 FRAME, MOUNTING, SEAT 27 LPP CASE, FOR 8-1/2 X 11 OPERATOR S MANUAL 28 LPP TAG, MFG. S/N MODEL CAPACITY A APP VALVE, JOYSTICK CONTROL B APP VALVE, JOYSTICK CONTROL TL CALL ARDCO

93 TL-198 AXLE BOLT MOUNTING TL CALL ARDCO

94 Copyright 1997 BILL OF MATERIAL TL-198 AXLE BOLT MOUNTING Page 1 of 1 Item Part No. Qty. Description Serial No./Date of Change BOLT, HEX, M20 X 2.5 X 140 LG. 2 AXC BUSHING, REDUCTION 3 AXC SUPPORT, OSCILLATING NOTE: Item 2 - Reference Parts List TL-100F, Front Axle Oscillating Support. Item 3 - Reference Parts List TL-101F, Rear Axle Oscillating Support. TL CALL ARDCO

95 TL-179 ENGINE MOUNT ASSEMBLY (Cummins Eng.) TL CALL ARDCO

96 Copyright 1997 BILL OF MATERIAL TL-179 ENGINE MOUNT ASSEMBLY (Cummins Eng.) Page 1 of 1 Item Part No. Qty. Description Serial No./Date of Change 1 LPAE18449B-01 2 BAR, FLAT /2 NC X 1.5 LG BOLT, NUT, F.W. & L.W. 3 LPAE18449B-02 2 BAR, FLAT 4 LAPE18449B-03 1 BAR, FLAT BOLT, HEX, 5/8-11 UNC X 1-1/4 LONG 6 EMG MOUNT, ENGINE 7 EMG WASHER, ENGINE LOCKNUT, 5/8-11 UNC TL CALL ARDCO

97 TL-132 ENGINE MOUNT ASSEMBLY (John Deere Eng.) TL CALL ARDCO

98 Copyright 1997 BILL OF MATERIAL TL-132 ENGINE MOUNT ASSEMBLY (John Deere Eng.) Page 1 of 1 Item Part No. Qty. Description Serial No./Date of Change 1 LPAE B 1 BRACKET, ENGINE MOUNTING, L.H. 2 LPAE B 1 BRACKET, ENGINE MOUNT, R.H BOLT, HEX, 5/8-11 UNC X 3-1/4 LONG 4 EMG MOUNT, ENGINE 5 EMG WASHER, ENGINE LOCKNUT, 5/8-11 UNC TL CALL ARDCO

99 TL-131 TRANSMISSION MOUNT ASSEMBLY TL CALL ARDCO

100 Copyright 1997 BILL OF MATERIAL TL-131 TRANSMISSION MOUNT ASSEMBLY Page 1 of 1 Item Part No. Qty. Description Serial No./Date of Change 1 LPAF18420B 1 MOUNT, TRANSMISSION, LEFT SIDE 2 LPAT18416B 1 MOUNT, TRANWMISSION RIGHT SIDE BOLT/NUT, 3/4 NC X 3-1/2 LONG 4 EMG MOUNT, RUBBER 5 EMG WASHER, TAIL, TRANSMISSION BOLT & LOCKWASHER, HEX, M X 1.5 LONG TL CALL ARDCO

101 THIS PAGE INTENTIONALLY LEFT BLANK TL CALL ARDCO

102 Copyright 1997 BILL OF MATERIAL Item Part No. Qty. Description Serial No./Date of Change HYDRAULIC CYLINDER GROUP TL CALL ARDCO

103 TL-050 CYLINDER, FORK TILT (LPP28796) TL CALL ARDCO

104 Copyright 1997 BILL OF MATERIAL TL-050 CYLINDER, FORK TILT (LPP28796) Page 1 of 1 Item Part No. Qty. Description Serial No./Date of Change 1 HCT TUBE ASSEMBLY 2 HCT ROD ASSEMBLY W/LUG AND BUSHING 3 HCT PISTON 4 HCT HEAD 5 HCT CAP, HEAD 6 HCT SCREW, SET 7 HCT PLUG, NYLON 8 HCT BEARING 10 HCT VALVE, COUNTER BALANCE 11 HCT FITTING, GREASE 12 HCT LOCKNUT, 1 1/ HCT BLOCK, VALVE 14 HCT CAPSCREW, HEX HEAD 15 HCT WASHER, LOCK 16 HCT TUBE, STOP 17 HCT O-RING 18 HCT SEAL, SLIPPER 19 HCT RING, WEAR 20 HCT O-RING 21 HCT RING, BACKUP 22 HCT POLYPAK 23 HCT WIPER 24 HCT O-RING N/S HCT KIT, SEAL (Includes items 17 thru 24.) TL CALL ARDCO

105 TL-051 CYLINDER, FRAME LEVELING (LPP27552) TL CALL ARDCO

106 Copyright 1997 BILL OF MATERIAL TL-051 CYLINDER, FRAME LEVELING (LPP27552) Page 1 of 1 Item Part No. Qty. Description Serial No./Date of Change 1 HCT ASSEMBLY, TUBE 2 HCT ASSEMBLY, ROD 3 HCT PISTON 4 HCT HEAD 5 HCT CAP, HEAD 6 LPP BEARING changed from HCT HCT LOCKNUT 8 HCT TUBE, STOP 9 HCT ASSEMBLY, VALVE BLOCK (Incl. Item #26) 11 HCT FITTING, GREASE 12 HCT SCREW, SET 13 HCT PLUG, NYLON 16 HCT LOCKWASHER 17 HCT CAPSCREW 18 HCT O-RNG 19 HCT RING, WEAR 20 HCT RING, PISTON 21 HCT RING, WEAR 22 HCT O-RING 23 HCT RING, BACKUP 24 HCT POLYPAK 25 HCT WIPER 26 HCT O-RING (Incl. in Item #9) N/S HCT KIT, SEAL (Incl. Items 18 thru 26) 27 HCT CARTRIDGE added to BOM TL CALL ARDCO

107 TL-084 CYLINDER, BOOM LIFT (LPP27773) TL CALL ARDCO

108 Copyright 1997 BILL OF MATERIAL TL-084 CYLINDER, BOOM LIFT (LPP27773) Page 1 of 1 Item Part No. Qty. Description Serial No./Date of Change 1 HCT WELDMENT, BARREL (Does not include zerks or bushings) 2 HCT WELDMENT, SHAFT (Does not include zerks or bushings) 3 HCT PISTON 4 HCT BEARING, ROD (HEAD) 5 HCT TUBE, STOP 7 HCT BEARING 8 HCT VALVE, COUNTER BALANCE 9 HCT BUSHING, SPHERICAL 10 HCT BLOCK, VALVE 11 HCT FITTING, GREASE 12 HCT NUT 13 HCT LOCKWASHER 14 HCT CAPSCREW, HEX HEAD 15 HCT O-RING 16 HCT SEAL, SLIPPER 17 HCT RING, WEAR 18 HCT O-RING 19 HCT RING, BACKUP 20 HCT POLYPAK 21 HCT WIPER 22 HCT RING, WEAR 23 HCT O-RING N/S HCT KIT, SEAL (Incl. Items 15 thru 23) TL CALL ARDCO

109 TL-199 CYLINDER, BOOM EXTEND (APP00511) TL CALL ARDCO

110 Copyright 1997 BILL OF MATERIAL TL-199 CYLINDER, BOOM EXTEND (APP00511) Page 1 of 1 Item Part No. Qty. Description Serial No./Date of Change 1 HCT ASSEMBLY, TUBE 2 HCT ROD 3 HCT PISTON 4 NLP HEAD, INTERNAL THREAD ONLY (was HCT0255) HCT TUBE, STOP 6 HCT LOCKNUT, HVS VALVE, C BALANCE (was HCT0111) HCT VALVE, C BALANCE 9 HCT PLUG, SAE #2 10 HCT O-RING 11 HCT RING, BACKUP 12 HCT SEAL, SLIPPER 13 HCT RING, WEAR 14 HCT O-RING 15 HCT RING, BACKUP (was HCT0170) NLP POLYPAK (was HCT0217) NLP RING, BACKUP (was HCT0261) NLP RING, WEAR (was HCT0260) NLP WIPER (was HCT0262) HCT SCREW, SET N/S HCT KIT, SEAL (Incl. Items 10 thru 19) N/S APP ASSEMBLY, HEAD GLAND (Inc. Items 4, & 14-19) added to BOM TL CALL ARDCO

111 TL-200 CYLINDER, CARRIAGE TRANSFER (APP00510) TL CALL ARDCO

112 Copyright 1997 BILL OF MATERIAL TL-200 CYLINDER, CARRIAGE TRANSFER (APP00510) Page 1 of 1 Item Part No. Qty. Description Serial No./Date of Change 1 HCT ASSEMBLY, TUBE 2 HCT ASSEMBLY, ROD 3 HCT PISTON 4 HCT HEAD 5 HCT TUBE, STOP 6 HCT LOCKNUT, HCT SCREW, SET 8 HCT FITTING, GREASE 9 HCT RING, BACKUP 10 HCT O-RING 11 HCT SEAL, SLIPPER 12 HCT RING, WEAR 13 HCT O-RING 14 HCT RING, BACKUP 15 HCT POLYPAK 16 HCT WIPER N/S HCT KIT, SEAL (Incl. items 9 thru 16) TL CALL ARDCO

113 TL-116 CYLINDER, SLAVE (APP00279) TL CALL ARDCO

114 Copyright 1997 BILL OF MATERIAL TL-116 CYLINDER, SLAVE (APP00279) Page 1 of 1 Item Part No. Qty. Description Serial No./Date of Change 1 HCT TUBE ASSEMBLY 2 HCT ROD ASSEMBLY 3 HCT PISTON 4 HCT HEAD 7 HCT SCREW, SET 8 HCT BEARING, SPHERICAL 9 HCT BEARING 10 HCT FITTING, GREASE 11 HCT O-RING 12 HCT RING, BACKUP 13 HCT SEAL, SLIPPER 14 HCT RING, WEAR 15 HCT O-RING 16 HCT RING, BACKUP 17 HCT POLYPAK 18 HCT WIPER N/S HCT KIT, SEAL (Incl. Items 11 thru 18) N/S APP CYLINDER, LESS BARREL (Incl. Items 2 thru 18) [NOTE: Gland may not interchange with most cylinders used prior to March 1996 because of thread type] TL CALL ARDCO

115 TL-220 CYLINDER, FORK ROTATE (LPP OPTIONAL) TL CALL ARDCO

116 Copyright 1997 BILL OF MATERIAL CYLINDER, FORK ROTATE TL-220 (LPP OPTIONAL) Page 1 of 1 Item Part No. Qty. Description Serial No./Date of Change 1 HCT ASSEMBLY, TUBE 2 HCT ASSEMBLY, ROD 3 HCT PISTON 4 HCT HEAD 5 HCT DCAP, HEAD 6 HCT LOCKNUT, 1 1/ HCT SCREW, SET, 1/ HCT PLUG, NYLON 9 HCT BEARING 10 HCT BEARING 11 HCT FITTING, GREASE 12 HCT O-RING 13 HCT POLYPAK 14 HCT O-RING 15 HCT RING, BACKUP 16 HCT POLYPAK 17 HCT WIPER N/S HCT KIT, SEAL (Incl. Items 12 thru 17) TL CALL ARDCO

117 THIS PAGE INTENTIONALLY LEFT BLANK TL CALL ARDCO