Ell PARTS CATALOG R-2216C HIGH FREE LIFT TRIPLEX I-BEAM MAST. White Materials Handling Division FOR ALL WHITE MOBILIFT TRUCKS 2000 TO 5000 LB CAPACITY

Transcription

1 PARTS CATALOG R-6C HIGH FREE LIFT TRIPLEX I-BEAM MAST FOR ALL WHITE MOBILIFT TRUCKS 000 TO 5000 LB CAPACITY TRIPLEX " I TT BEAM UPRIGHT CONTENTS Ell WHITE MOTOR CORPORATION Upright for MSB, MA, WC & NY0-0 Uprights for MA & WC0-50 and MY0-50 Carriages for Uprights Lift Cylinder, " Dia. for MSB, MA, WC & NY0-0 Lift Cylinder, -/" dia. for MA & WC0-50 and MY0-50 Variable Parts Charts for Uprights Page - Page -7 Page -9 Page 0- Page -5 Page 6- White Materials Handling Division HOPKINS, MINNESOTA 55 Printed in U.S.A. 6/77

2 Ref. No. Part No. DESCRIPTION No. Pcs. UPRIGHT FOR TRIPLEX -/" "I" BEAM HI-FREE LIFT - GROUP I lb. Capacity, Used on the following S/N and After MSB, 575B-55B MA & WC0-0S, 597B-607B MA & WCOH, 50B-5B MY0-0, 5B-57B Rail - outer assembly, see chart page 6 Rail - intermediate assembly, see chart page 6 Rail - inner assembly, see chart page 6 5A6 Pin - rail roller (welded to rails) A 5A65 Dog - welded to outer rail and head 50A96 Bolt-stop /"-0 x -/" (in outer rail) 5 5B709 Cap - bearing, outer rail, pivot, MSB Series 5 5B505 Cap - bearing, outer rail, pivot, MA and WC 6 5A6790 Screw - bearing cap, MSB, /"- x -/" 6 5A666 Screw. - bearing cap, MA and WC, 5/"- x -/" 50A69 - Fitting, grease, /" straight, in mast wunt 7 5A06 Bushing - bearing cap, MSB 7 5A577 Bushing - bearing cap, MA and WC Cylinder assembly, (9A69) chart page 6, breakdown page Pin - pivot, for upright, -/" dia. MY 9 50A655 Bolt-hex, 5/6"- x /" 50A67 Fitting-grease, /" x 90, MY 0 6A0 Head - cylinder 50A7 Bolt-head, pt., 7/6"- x " 5A5 Guide - 5/" x " x " 50A60 Bolt-hex, /"- x -/" 50A Washer-plain, 7/" I.D., -/6" O.D 5A0 Sheave - chain, on cylinder head, -7/6" 0.D., -7/6" I.D 6 5A06 Bearing - chain sheave, on cylinder head, -/6" dia. x -/" Plate - sheave retainer, on cylinder head, /" x -/" dia. 50A606 Pin-roll, /" x /" 9 50A75 Screw-ctrsunk.head, /"- x /" Sheave - chain, lower, -9/6" dia. x -/" I.D 6A Pin - sheave, lower, R.H 6A0 Pin - sheave, lower, L.H 50A66 Bolt-hex /"-6 x /" 5A09 Sheave - chain, upper, -7/" dia. 5A6 Pin - sheave, upper," x-/" Bearing - roller, lower and upper sheaves, -/"dia 50A656 Bolt-hex, 5/6"- x " 6 5A Roller-mast channels, -/" Shim - roller, -/" dia.,.00 thick A.R Shim - roller, -/" dia.,.05 thick A.R. 7 5A5 Shim - roller, -/" dia.,.00 thick A.R Latch - -5/" long (5A67) 9 5A69 Pin - latch, /" x -/" 0 5A60 Washer - latch " O.D 50A656 - Bolt, hex., 5/6"- x " Latch - assembly, complete (6A67) Includes ref. #: 50A65 - Fitting, lube, /" 5A57 Washer - thrust, for latch,.55 x 7/" I.D. x -/" 0.D Washer - thrust, for latch,.5 x 7/" x -/"0 D 0A5 Ring - retaining 5A65 Bushing - " O.D 5 5A65 Cap - hex. head, 5/" O.D Plunger - latch , Spring - plunger, -/" long 6A Dog - plunger, intermediate rail 50A6 - Bolt, hex., /"- x -/"

3 Ref. No. Part No. DESCRIPTION No. Pcs. UPRIGHT FOR TRIPLEX -/" "I" BEAM (Coned) 0 Chain - lift, see chart on page 6 5A 0 Anchor - chain, /"-6 L.H. x 6-/" long 50A596 Nut-hex, jam, /"-6 L.H Link - connector, lift chain to anchor, with cotter pin 5A 770 Adjuster - chain 50A Nut, jam, /" -6 Rod - anchor, see chart page Pin - tilt cylinder, for bushing style end,-/" x -/" 50A0 Bolt - pt., /"-6 x " Pin - tilt cylinder, for self-aligning bearing end, " x -/" 5A 0 Decal - White 5A Decal - High Free Lift

4 Ref. No. Part No. DESCRIPTION No. Pcs. UPRIGHT FOR TRIPLEX 5-/" "I" BEAM HI-FREE LIFT - GROUP II lb. Capacity MA & WC0-50 S/N 69 to 60, 709F to 7F Inc. MY0-50 S/N 6 to 66, 75F to 7F Inc. A A6 5A65 5B505 5A666 5A577 5A59 Rail - outer assembly, see chart page 7 Rail - intermediate assembly, see chart page 7 Rail - inner assembly, see chart page 7 Pin - rail roller (welded to rails) Dog - welded to outer rail and cylinder head tie bar 50A96 Bolt-stop /"-0 x -/" (in outer rail) Cap - bearing, outer rail pivot, -5/" holes, MA/WC Screw - bearing cap, 5/"- x -/", MA/WC Bushing - bearing cap, MA/WC Cylinder - assembly, (9A5) chart page 7, breakdown page Pin - pivot for upright, MY 50A77 Pin - roll, /" x " MY Head - cylinder, used capscrew to retain sheaves (6A7) NOTE: Cyl. head ( bolt) can be converted to bolt using head, plug for cyl. and -50A 6 bolts, pt. 5A65 Spacer - -/" x " 5A65 Guide - " x -5/6" 50A5 Screw - flat head, hex socket, /"-0 x -/" 50A6 Bolt - hex, /"- x -/" 50A Washer, plain 7/" x -/6" Washer - thrust, on cylinder head, -/" O.D., -5/" I.D 5A0 +Sheave - chain, on cylinder head, -/" dia., -/6" I.D +50A65 Ring-retainer, -5/" ext f+sheave-chain, on cylinder head, -/" O.D., -7/6" I.D 5A60 +Bearing - chain sheave, on cylinder head, -/6" dia. x -/" Bearing - chain sheave, on cylinder head, -7/6" dia. x -/" Plate - sheave retainer, on cylinder head, /" x -/" dia. ++50A606 Pin - roll, /" x /" ++50A75 Screw - ctrsunk. head, /"- x /" +NOTE: Used with cyl. heads using 50A65 retaining ring. ++NOTE: Used with cyl. heads using 50A75 screws and plate Sheave - chain, lower, -/" dia. x -/" I.D 6A66 Pin - sheave, lower, R.H 6A67 Pin - sheave, lower, L.H 50A66 Bolt-hex, /"-6 x 5/" 5A66 Sheave - chain, upper, 5-5/6" dia. -/" I.D 5A6 Pin - sheave, upper Bearing - roller, lower & upper sheaves, -/" (0-0000) Washer - thrust, bearing, " x -/" x /6" thick 50A657 Bolt-hex, 5/6"- x -/" 5A6 Roller - mast channels,,990 diameter Shim-roller, " dia.,.005 thick Shim-roller, " dia.,.00 thick 5A656 Shim-roller, " dia.,.0 thick Latch - -5/" long (5A67) 5A69 Pin - latch 5A60 Washer - latch, /" x /" I.D., " O.D 50A656 - Bolt, hex, 5/6"- x " 6A67 Latch - assembly, complete, includes ref. # 50A65 - Fitting, lube, /" straight Washer - thrust, for latch, -/" O.D. x.5 0A5 Ring - retaining 5A65 Bushing - " O.D 5A65 Cap - plunger, hex head, 5/" O.D Plunger - latch Spring - plunger, -/" long 6A6 Dog - plunger, intermediate rail 50A60 - Bolt, hex, /"- x -/" Shim - dog, " x -/" x /6" A.R. A.R. A.R.

5 Ref. No. Part No. DESCRIPTION No. Pcs. UPRIGHT FOR TRIPLEX "r BEAM Group I (Coned) 0 Chain - lift, see chart on page 6 5A 660 Anchor - chain, /"-6 L. H. 50A596 Nut - hex, jam, /"-6 L.H Link - connector, lift chain to anchor 5A770 Adjuster - chain 50A Nut, jam, /"-6 Rod - anchor, see chart page 6 5 5A6 Pin - tilt cylinder, -/" x -/6" 50A57 - Ring, retaining, -/" I.D. for 5A6 pin Pin - tilt cylinder, for bushing style end, -/" x -/" Pin - tilt cylinder, for self-aligning brg. end, " x -/" 50A0 Bolt - pt., /"-6 x " 5A0 Decal - White 5A Decal-- High Free Lift 5

6 Ref. No. Part No. DESCRIPTION No. Pcs. UPRIGHT FOR TRIPLEX 5-/" "I" BEAM HI-FREE LIFT - GROUP III lb. Capacity MA & WC0-50 S/N 709G to 7G and after. MY0-50 S/N 75G to 7G and after A6 5A65 5B A666 5A577 5A A65 5A A66 6A67 5A66 5A A6 5A A69 5A60 6A A5 5A65 5A A Rail - outer assembly, see chart on pages 7 and Rail - intermediate assembly, see chart on pages 7 and Rail - inner assembly, see chart on pages 7 and Pin - rail roller (welded to rails) Dog - welded to outer rail and cyl. head tie bar 50A96 Bolt-stop /"-0 x -/" (in outer rail) 50A6 Bolt-hex, in cylinder base, /"- x " Cap - bearing, outer rail pivot, -5/" holes, MA/WC Cap - bearing, outer rail pivot, -/" & -5/" hole, MA & WC Insert - mounting bolt, /", 5/"- x 5/" 50A69 - Screw, bearing cap, /"- x -/", for cap Screw - bearing cap, 5/"- x -/", MA/WC 50A69 - Fitting, grease, /" straight, in mast mount Bushing - bearing cap, MA/WC Cylinder - assembly ( ) chart page 7and, breakdown p. Pin - pivot for upright, MY 50A77 Pin-roll, /" x ", MY 50A6 Fitting-grease, /" x 90 0, MY Head - cylinder, ( bolt mounting to lift cylinder) Spacer - -/" x " Guide - " x -5/6" 50A6 Bolt - point,l/"- x -/" 50A6 Bolt - hex, /"- x -/" 50A Washer - plain, 7/" x -/6" Sheave - chain, on cylinder head, -/" O.D., -7/6" I.D Bearing - chain sheave, on cylinder head, -7/6" dia. x -/" Plate - sheave retainer, on cylinder head, /" x -/" dia. 50A606 Pin - roll, heavy, /" x /" 50A75 Screw-ctrsunk. head, /"- x /" Sheave - chain, lower, -/" dia. x -/" I.D Pin - sheave, lower, R.H Pin - sheave, lower, L.H 50A66 Bolt-hex, /"-6 x 5/" Sheave - chain, upper, 5-5/6" dia. -/" I.D Pin - sheave, upper,"dia.x-/" Bearing - roller, lower & upper sheaves, -/" (0-0000) Washer - thrust, bearing, -/" O.D 50A657 Bolt - hex, 5/6"- x -/" Roller - mast channels,.990 diameter Shim - " diameter,.0 thick Shim - roller, " dia.,.00 thick Shim - roller, " dia.,.005 thick Latch - -5/" long (5A67) Pin - latch Washer - latch, /" x /" I.D., " O.D 50A656 - Bolt, hex, 5/6"- x " Latch - assembly, complete Includes ref. : 50A65 - Fitting, lube, /" straight Washer - thrust, for latch, -/" 0.D. x.5 Ring - retaining Bushing - " 0.D Cap - hex head, 5/" O.D Plunger-latch Spring - plunger, -/" long Dog-plunger intermediate rail 50A60 - Bolt, hex, /"- x -/" Shim - dog, " x -/" x /6" - A.R. A.R. A.R. 6

7 Ref. No. Part No. DESCRIPTION No. Pcs. UPRIGHT FOR TRIPLEX "I" BEAM GROUP II (Cont'd) 0 Chain - lift, see chart on page 7 and - 5A660 Anchor - chain, /"-6 L.H 50A596 Nut-hex, jam, /"-6 L.H Link - connector, lift chain to anchor 5A770 Adjuster - chain 50A Nut, jam, /"-6 Rod - anchor, see chart page 7 and 5 5A6 Pin - tilt cylinder, -/" x -/6" 50A57 - Ring, retaining -/" I.D., for 5A6 pin Pin - tilt cylinder, for bushing style end, -/" x-/" Pin - tilt cylinder, for self-aligning brg.end, " x -/" 50A0 Bolt - pin, pt., /"-6 x 5A0 Decal - White 5A Decal - High Free Lift 7

8 Ref. No. Part No. DESCRIPTION No. Pcs. CAR RIAGE FOR "I" B EAM MASTS, TRIPLEX HIGH FREE LIFT 000# -000# " Below 000#-5000# " Below 000#-5000# A +6 +6A +6A5 +6A6 +6A7 +6A +6A9 +6A0 +6A (Tab.6) (Tab.0) 57 5A65 6A 5A A A6 5A559 50A A A6 5A7 50A976 5A66 5A669 5A667 50A 5A * A679 *6A60 *6A6 *6A6 *6A6 *6A6 *6A65 *6A66 *6A67 *6A6 *6A69 (Tab.60) Center,Bars **6A **6A **6A **6A5 **6A6 **6A7 (Tab.69) 5A6 5A65 6A 5A6 5A655 50A A6 5A559 50A 5A69 5A667 0A760 5A65 50A500 50A A6 5A6 50A75 5A66 5A669 5A667 50A 5A * Carriage-assembly, " Carriage-assembli, " Carriage-assembly, 6" * Carriage-assembly, " * Carriage-assembly, 0" * Carriage-assembly, " * Carriage-assembly, " * Carriage-assembly, 6" * Carriage-assembly, " * Carriage-assembly, 50" * Carriage-assembly, 5" * Carriage-assembly, 5" * Carriage-assembly, 60" +NOTE: Used on MSB, MA & WC0-0S (Tab.06) *NOTE: Used on MA and WC0-50 " Below ** " ** " ** **n-6006f6f Carriage-assembly, 6" Carriage-assembly, " Carriage-assembly, 0" Carriage-assembly, " Carriage-assembly, " Carriage-assembly, 6" Carriage-assembly, " Carriage-assembly, 50" Carriage-assembly, 5" Carriage-assembly, 56" Carriage-assembly, 60" Carriage-assembly, 6" ++POTE: Used on MY0-0. **NOTE: Used on MY0-50. (Tab.0605) Pin-carriage roller (welded to carriage) Dog-carriage(welded to R.H. carriage bar) Bracket-load safety, welded to carriage bars Roller-mast and carriage Washer-roller, -/" diameter Screw-flat head, /" Shim--/" I.D.x " 0.D Plate-adjusting Roller-thrust Pin-roller Bolt- pt., /"-6 x /" Roller-thrust Shaft-roller Fitting-lube Shim-roller Bolt-hex socket, /"-0 x " (Grade ) Bolt- pt., /"- x -/" (Grade ) Washer-lock, external, /" Washer-thrust, step washer Chain-anchor, carriage Pin-anchor, chain Ring-retaining Fork-lifting (order from WMHD Sales) Pin-fork stop, -/6" long Lever-stop pin Spring-stop pin Pin-roll, /6" x " Washer-fork lock, /6" x /" x 7/" Cap-plunger, hex head, 5/" Plunger-carriage Spring-plunger

9 0,, 6 7 N --- =-- a 5 NOTE: MA & WC Carriages D and prior had chain anchor pin -/" below top of lower fork bar. MA & WC carriages after E had chain anchor pin " below top of lower fork bar. MY0-50 carriages D and prior had chain anchor pin mounted between fork bars. MY0-50 carriages E and after had chain anchor pin " below top of lower fork bar. 9

10 Ref. No. Part No. DESCRIPTION No. Pcs. LIFT CYLINDER - " DIAMETER WITH /" "I"-BEAM GROUP I USED ON MSB, MA, WC, AND MY0-0 SERIES P70 5P P A A79 5P A A65 5A 5A A Cylinder - lift, complete (9A69), See chart on page 6 Each includes Ref. # through : Shell - " thru 6" cylinder (must include MFH & OAHL). Screw - button head, cylinder shell Seal - button head screw Retainer - threaded, wiper ring Valve - relief, in plunger +"0" Ring - valve Washer - valve Ring - snap, valve retainer Piston - half ring Ring - retaining Spacer primary, between shell and intermediate +Ring - wiper +Ring - nylon +Seal +Ring - back up +"0" Ring Tube - intermediate, for " thru 6" cylinder(must include MFH & OAHL) +Ring - nylon, pis.ton +Seal - piston Retainer - threaded, intermediate tube +"0" Ring - intermediate tube +Back up Ring - intermediate tube Spacer - secondary, between intermediate tube & plunger Plunger - assembly, for " thru 6" (must include MFH & OAHL +Seal - intermediate tube +Ring - nylon, intermediate tube +Ring - wiper, intermediate tube Plug - plunger assembly +"0" Ring - plunger assembly +Repair Kit - lift cylinder +NOTE: Contents of repair kit identified by a cross. Valve - flow control, includes "0"-Ring seal (0-006) Seal - "0"-Ring, valve to cylinder base 50A6066 Bolt-hex, 5/6"- x " 50A0 Washer - plain, /" /6" 0.D 50A - Elbow-5/" x 5 x 7/- x 7 Seal - "0" Ring, elbow, connector, tube Hose-lift, cyl. to valve, /" x 6" (MSB0-5) Hose-lift, cyl. to low valve, /"x" (MA & WC0-0S) Hose-lift, cyl. to high valve,steel cord /"x"(ma/wc0-0s Hose-lift, cyl. to valve, /" x " (MA & WC0) Hose-lift, cyl. to valve, /" x -/" (MY0-0) A.R. 0

11 0

12 Ref. No. Part No. DESCRIPTION No. Pcs. LIFT CYLINDER - -/" DIAMETER WITH 5 /" "I" BEAM-GROUP II Used on MA-WC0 thru 50. Mast Serial No. 69 to 60 thru 709F to 7F. Used on MY0-50 Mast Serial No. 6 to 66 thru 75F to 7F. Cylinder - lift, complete (9A5), See chart on page 7 Each includes Ref. # through : Shell - for " thru 6" cylinder (must include MFH & OAHL) Screw - button head, cylinder shell Seal - button head screw Retainer - threaded, wiper ring (replaces ) 6 5P70 Valve - relief, in plunger 7 5P705 -"0" Ring - valve Washer - valve Ring - snap, valve retainer Piston - half ring Ring - retaining Spacer - primary, between shell and intermediate A.R Ring - wiper Ring - nylon Seal Bearing used with retainer (ref. #5) 6 5P -+Ring - back up 7 M -+"0" Ring, -/" 0.D. x.9 (5P55) Tube inter. for " thru 6" (must inc. MFH & OAHL) Ring - nylon, piston Seal - piston Bearing - used with plunger with wear ring Retainer - threadd, inter. tube (replaces ) 5P695 -+"0" Ring - intermediate tube 5P696 -+Back up Ring - intermediate tube 5 Spacer secondary, between intermediate tube & plunger 6 Plunger - assembly, for " thru 6" (must include MFH&OAHL Bearing - retainer, inter. tube (used with ref Seal - intermediate tube Ring - nylon, intermediate tube Ring - wiper, intermediate tube Plug - plunger assembly 0A79 -+"0" Ring - plunger assembly Repair Kit - lift cylinder with wear rings +NOTE: Contents of repair kit identified by a cross (+) Repair Kit-lift cylinder with out wear rings. -NOTE: Contents of repair kit identified by a dash (-). -NOTE: Repair kit used in lift cylinders which are less wear rings begin on MA mast serial number 69D to 60D thru 709 to 7F. On MY mast serial number 6D to 66D thru 75F to 7F. 5A650 Valve - flow control Tube - cylinder inlet, -/" long 5 50A - Connector - straight, tube to valve Tube - feed hose 7 50A - Elbow - 5, tube to valve 0A65 Seal - "0" ring, elbow, connector, tube #Fitting - vent, on flow control valve #Washer - fiber, fitting seal #Capscrew - special, fitting retainer #Parts included in changeover kit 5A060 Fitting-vent hose, on tank 50A05 clamp-hose, 5/" 5P776 Hose-vent, /", 5P776 is ft. length A.R Hose-lift, to cylinder, steel covered, " (on MA and WC)

13 ,MWV L air 0 \ ih,. \NL\

14 Ref. No. Part No. DESCRIPTION No. Pcs. LIFT CYLINDER - -/" DIAMETER with 5 /" "I"-Seam Group III Used on MA-WC 0 thru 50. Mast Serial No. 709G to 7G and after. Used on MY 0-50 Mast Serial No. 75G to 7G and after P70 5P P 5P P695 5P A A Cylinder - lift, compl. ( ), See chart on page 7. Each includes Ref. # through : Shell - for " thru 6" cylinder (must include MFH & OAHL). Screw - button head, cylinder shell Seal - button head screw Retainer - threaded, wiper ring Valve - relief, in plunger -"0" Ring - valve Washer - valve Ring - snap, valve retainer Piston - half ring Ring - retaining Spacer - primary, between shell and intermediate -Ring - wiper -Ring - nylon -Seal -Ring - back up -"0" Ring Tube - inter, for " thru 6" cyl.(must inc. MFH & OAHL) Ring - nylon, piston half Seal - piston half Retainer - threaded, intermediate tube -"0" Ring - intermediate tube -Back up Ring - intermediate tube Spacer secondary, between intermediate tube & plunger Plunger - assembly, for " thru 6"(Must include MFH & OAHL: -Seal- intermediate tube -Ring - nylon, intermediate tube -Ring - wiper, intermediate tube Plug - plunger assembly -"0" Ring - plunger assembly -Repair Kit - lift cylinder -NOTE: Contents of repair kit identified by a dash (-). Valve - flow control, includes "0"-Ring seal Seal - "0"-Ring, valve to cylinder base 50A6066 Bolt-hex, 5/6"- x /" 50A - Elbow - 5, tube to valve Seal - "0" ring, elbow, connector, tube Hose-lift, to cyl., /" x 6-/" long (MA & WC) Hose-lift, to cyl., /" x 7" long (MY0-50B) A.R.

15 0 5

16 VARIABLE PARTS CHART FOR "I" BEAM MAST, /" BEAMS, TRIPLEX HIGH-FREE LIFT Used on MSB0-5 with Mast Serial No. 575B thru 55B and after. (BL5) CHAIN OUTER INTER. INNER CYLINDER CHAIN ANCHOR OAHL MFH RAIL RAIL RAIL ASSEMBLY ASSEMBLY PITCHES LENGTH ROD LENGTH ( tab 69 ( tab 690 (tab 69) (tab 69) (tab ) (tab 006) A60 5A / / A6 5A / / A6 5A / / 7-/ A6 5A / / A6 5A / / -/ A65 5A / / / / -/ A66 5A / / -/ A67 5A / / 9-/ A6 5A / / A69 5A / / A70 5A / / Used on MA-WC0-05 with Mast Serial No. 597B thru 607B and after. (BL5) OAHL MFH OUTER RAIL INTER RAIL INNER RAIL CYL. ASSY. CHAIN ASSY PITCHES LENGTH C.A. ROD LENGTH ( tab 00) (tab 690) (tab 69) (tab 69) (tab ) (tab 006) A60 5A / / A6 5A / / , A6 5A / / 7-/ " A6 5A / / A6 5A / / -/ A65 5A / / / / -/ A66 5A / / -/ A67 5A / / 9-/ A6 5A / / A69 5A / / A70 5A _ -/ / Used on MA-WC0 with Mast Serial No. 50B thru 5B and after. (BL5) OAHL MFH OUTER RAIL INTER RAIL INNER RAIL CYL. ASSY. CHAIN ASSY. PITCH LENGTH C.A. ROD LENGTH (tab 007) (tab 690) (tab 69) ( tab 69) (tab ) (tab 006) A60 5A / / A6 5A / / A6 5A / / 7-/ A6 5A / / A6 5A / / -/ A65 5A / / / / -/ A66 5A / / -/ A67 5A / / 9-/ A6 5A / / A69 5A / / A70 5A / / Used on MY0-0 with Mast Serial No. 5B thru 57B and after. (BL5) OAHL MFH OUTER RAIL INTER RAIL INNER RAIL CYL. ASSY. CHAIN ASSY. PITCH LENGTH C.A. ROD LENGTH (tab 00) (tab 690) (tab 69) ( tab 69) (tab ) (tab 006) 69-/ A6 5A / / 7-/ A6 5A / / 75-/ A6 5A / / 79-/ A6 5A / / -/ A65 5A / / 5-/ A66 5A / / 9-/ A67 5A / / 9-/ A6 5A / / 97-/ A69 5A / / 0-/ A70 5A / / 6.

17 VARIABLE PARTS CHART FOR "I BEAM" MAST, 5 /" BEAMS TRIPLEX, HI-FREE LIFT Used on MY0-50 with Mast Serial No. 6 to 66 thru 75F to 7F Inc. Chain anchor pins located between fork bars (BL6) CHAIN OUTER INTER. INNER CYLINDER CHAIN ANCHOR OAHL MFH RAIL RAIL RAIL ASSEMBLY ASSEMBLY PITCHES LENGTH ROD LENGTH (tab 60) (tab 67) (tab 609) (tab 5) (tab ) (tab 006) A 6A767 6A690 5A6 5A / / 70 6A 6A76 6A69 5A / / 7 5 6A 6A769 6A69 5A6 5A5 7 6-/ / 76-/ 6 6A 6A770 6A69 5A6 5A5 5 6-/ / 0 7 6A5 6A77 6A69 5A / / -/ 0 6A6 6A77 6A695 5A66 5A5 -/ / 6-/ 9 6A7 6A77 6A696 5A67 5A / / A 6A77 6A697 5A6 5A / / 9-/ 07 6A9 6A775 6A69 5A / / A0 6A776 6A699 5A / / A 6A777 6A700 5A / / Used on MA-WC0 thru 50 with Mast Serial No. 69 to 60 thru 709F to 7F Inc. Chain anchor pins located -/" below top of lower fork bar (BL6) CHAIN OUTER INTER. INNER CYLINDER CHAIN ANCHOR OAHL MFH RAIL RAIL RAIL ASSEMBLY ASSEMBLY PITCHES LENGTH ROD LENGTH (tab 6) (tab 67) (tab 609) (tab 5) (tab ) ( tab A756 6A767 6A690 5A6 5A / / 6 6A757 6A76 6A69 5A / / 7 5 6A75 6A769 6A69 5A6 5A5 7 6-/ / 7-/ 6 6A759 6A770 6A69 5A6 5A5 5 6-/ / 7 7 6A760 6A77 6A69 5A / / -/ 0 6A76 6A77 6A695 5A66 5A5 -/ / -/ 9 6A76 6A77 6A696 5A67 5A / / 9 6A76 6A77 6A697 5A6 5A / / 9-/ 07 6A76 6A775 6A69 5K / / A765 6A776 6A699 5A / / 9 5 6A766 6A777 6A700 5A / / Used on MY0-50 with Mast Serial No. 75 to 7 thru 750 to 70 Inc. Chain'anchor pins located between fork bars (BL6) CHAIN OUTER INTER. INNER CYLINDER CHAIN ANCHOR OAHL MFH RAIL RAIL RA ASSEMBLY PITCHES LENGTH ROD LENGTH (tab 0) (tab 0) (tab 0) (tab 006) (tab ) ( tab A 6A767 6A A / / 70 6A 6A76 6A / / 7 5 6A 6A769 6A A5 7 6-/ / 76-/ 6 6A 6A770 6A A5 5 6-/ / 0 7 6A5 6A77 6A / / / / / / 90-/ / / / / 97-/ / / 00-/, / / Used on MA & WC0-50 with Mast Serial No. 709 to 7 thru 7090 to 70 & 760D Inc. Chain anchor pins located -/" below top of lower fork bar (ELE) CHAIN OUTER INTER. INNER CYLINDER CHAIN ANCHOR OAHL MFH RAIL RAIL RAIL ASSEMBLY ASSEMBLY PITCHES LENGTH ROD (tab 05) (tab 0) (tab 0) (tab 006) (tab ) tab A756 '6A767 6A A / A757 6A76 6A / A75 6A769 6A A5 7 6-/ LENGTH -/ 0-/ -/ 7-/ 6 6A759 6A770 6A A5 5 6-/ / 7 7 6A760 6A77 6A / / / / ' : A50 5 -/ / '0-00'57 9-/ / -/ ' / _- / , / / 95-/ / / 9-/ _5_0-600 _ _0-0066_ _ 9-/_ , 9- / 7

18 VARIABLE PARTS CHART FOR "I" BEAM MASTS, 5-/" BEAMS TRIPLEX, HI-FREE LIFT Used on MY0-50 with Mast Serial No. 75E to 7E and after Chain anchor pins located " below top of lower fork bar BL6 CHAIN ASSEMBLY OUTER INTER. INNER CYLINDER RAIL RAIL RAIL ASSEMBLY CAUL MFH (Tab 0) (Tab 0) (Tab 0) (Tab 006) (Tab ) PITCHES LENGTH CHAIN ANCHOR ROD (Tab 006) LENGTH A 6A767 6A A / / 70 6A 6A76 6A / / 7 5 6A 6A769 6A A5 65-/ / 76/ 6 6A 6A770 6A / / 0 7 6A5 6A77 6A / / / / A / / A / / / / 97/ / / 00/ / / Used on MA-WC0 thru 50 Mast Serial No. 709E to 7E & 760E & After. Chain anchor pins located " below top of lower fork bar BL6 CHAIN OUTER INTER. INNER CYLINDER CHAIN ANCHOR RAIL RAIL RAIL ASSEMBLY ASSEMBLY ROD OAHL MFH (Tab 05) (Tab 0 (Tab 0) (Tab 006 (Tab ) PITCHES LENGTH (Tab 006 LENGTH A756 6A767 6A A / / 6 6A757 6A76 6A / / 7 5 6A75 6A769 6A A5 65-/ / 7/ 6 6A759 6A770 6A / / 7 7 6A760 6A77 6A / / / / A / / A / / / A / / / / 95/ / / 9/ / /