R80 Rotary Disc Pull-Type Mower Conditioner and Self-Propelled Windrower Header. Parts Catalog Revision C

Transcription

1 R80 Rotary Disc Pull-Type Mower Conditioner and Self-Propelled Windrower Header Parts Catalog

2 R80 Rotary Disc Pull-Type Mower Conditioner and Self-Propelled Windrower Header Published: April, 2015 NOTE: Keep your MacDon publications up-to-date. The most current version can be downloaded from our website ( or from our Dealer-only site ( (login required).

3 R80 Rotary Disc Pull-Type Mower Conditioner and Self-Propelled Windrower Header PARTS CATALOG CONTENTS PAGE 1 Index - Alphabetical... 2 Abbreviations & Serial Number Breaks... 3 Cutterbar Assembly... 4, 5 Cutterbar... 6, 7 Conditioner and Crop Lifting Roll Assembly... 8, 9 Pull-Type Forming Shields... 10, 11 SP Header Forming Shields... 12, 13 Cutterbar & Rolls Assembly... 14, 15 Header Drives Header Drive Gearbox... 20, 21 Crop Lift Roll Drive Idler Assembly... 22, 23 Suspended Rotary Cages Drives... 24, 25 Header Front Shields... 26, 27 Header Rear Shields... 28, 29 Self-Propelled Configuration... 30, 31 Carrier Assembly... 32, 33 Carrier Frame Components... 34, 35 Carrier Springs... 36, 37 Articulating Hitch Hydraulic Drive Articulating Hitch Drive Gearbox... 44, 45 Front Half Drivelines... 46, 47 Articulating Hitch Hydraulics & Electrical Articulating Hitch Assembly... 60, 61 Header Hydraulics & Electrical 16 Ft SP Header Hydraulics & Electrical 13 Ft SP (M200)... 66, 67 Header Hydraulics & Electrical 13 Ft SP (M150)... 68, 69 Lift Boots... 70, 71 Decals, Reflectors & Paint... 72, 73 Product Identification Decals Mechanical Header Angle... 76, 77 Hydraulic Header Angle Kit... 78, 79 Drawbar Hitch... 80, 81 Temporary Transport Hitch... 82, 83 3-Point Hitch Linkage... 84, 85 Options: Shoe Lift, Gauge Rollers, Tall Crop Dividers, Feed Assisting Plates, Adjustable Shoes, Accelerators, Pulltype Drive Pressure Gauge, Grass Seed Cradle Conversion Grass Seed: Converging Drums... 92, 93 Drive Drum Hydraulics... 94, 95 Suspended Drive Drums... 96, 97 Forming Rods... 98, 99 Tall Crop Transition Shield , Ft Grass Seed to Hay Conversion CE (European Unit) Special Components Tool Operated Shield Latches , Panel (Non-Text) Decals , 117 NUMERICAL LIST SUGGESTED STOCKING LIST BOLD TEXT IS USED TO INDICATE UPDATES MADE AT THE CURRENT REVISION LEVEL.

4 2 ALPHABETICAL INDEX A Accelerators Adjustable Shoes Articulating Hitch Assembly Articulating Hitch Drive Gearbox Articulating Hitch Hydraulic Drive Articulating Hitch Hydraulics & Electrical C Carrier Assembly Carrier Frame Components Carrier Springs Conditioner and Crop Lifting Roll Assembly... 8 Converging Drum, Grass Seed 92 Crop Lift Roll Drive Idler Assembly Cutterbar... 6 Cutterbar & Rolls Assembly Cutterbar Assembly... 4 D Decals & Reflectors Decals 2-Panel (CE Units) Decals Product Identification Drawbar Hitch Drive Drum Hydraulics, Grass Seed Drive Pressure Gauge Drivelines, Front Half F Frame Components Carrier Feed Assisting Plates Forming Rods G Gauge Rollers H Header Drive Gearbox Header Drives Header Hydraulics & Electrical 13 Ft SP (M150).. 68 Header Hydraulics & Electrical 13 Ft SP (M200).. 66 Header Hydraulics & Electrical 16 Ft SP Header Shields, Front Header Shields, Rear Hitch Assembly Hitch Drive Gearbox Hitch Linkage 3-Point Hydraulic Header Angle Kit Hydraulics Drive Drum, Grass Seed L Lift Boot M Mechanical Header Angle P Product Identification Decals Pull-Type Forming Shields S Self-Propelled Configuration Shoes Adjustable Shoe Lift SP Header Forming Shields Suspended Drive Drums Suspended Rotary Cages Drives T Tall Crop Dividers Temporary Transport Hitch Tool Operated Shield Latches (CE Units) Transition Shield, Tall Crop Grass Seed

5 ABBREVIATIONS 3 A/R as required (quantity varies) GS grass seed I.D. inside diameter LH left-hand (determined from Operator's position, facing forward) NC national coarse thread NF national fine thread NSS not serviced separately O.D. outside diameter OPT optional PT pull type (mower conditioner) REF reference, part number called up elsewhere in catalog RH right-hand (determined from Operator's position, facing forward) S.N. serial number SP self-propelled (windrower) header SERIAL BREAKS The side of the serial number on which the dash ( ) appears determines whether the part is used "up to" or "after" the serial number given. Example: Used on machines up to and including serial number Used on machines including and after serial number NOTE: When ordering, be sure the complete and proper part number is given. Some parts vary with header size; be sure you are ordering the correct part number for your unit. In this catalog, right-hand (RH) and left-hand (LH) are determined from the Operator s seated driving position in the tractor or windrower cab. An arrow is sometimes used in illustrations to indicate forward position as shown below.

6 4 CUTTERBAR ASSEMBLY 10-DISC CUTTERBAR ILLUSTRATED SEE LIST FOR 8-DISC CUTTERBAR PARTS

7 CUTTERBAR ASSEMBLY REF PART QTY SERIAL DESCRIPTION 16FT 13FT SUPPORT CUTTERBAR CRADLE WELDT, 16 FT SUPPORT CUTTERBAR CRADLE WELDT, 16 FT SUPPORT CUTTERBAR CRADLE WELDT, 13 FT SUPPORT CUTTERBAR CRADLE WELDT, 13 FT CUTTERBAR ASSEMBLY 16 FT 10 DISC KIT 13 FT CUTTERBAR, SERVICE (See Note 1) PLATE (13 FT Only) PLATE SKID NOTCH GUARD WIDE GUARD NARROW PLATE DISC WELDT SHIELD NUT (qty 13 FT and 16 FT regular = 16 for 2008 and prior)... GS GS GS= BLADE CCW-47 X 108 X 4 X 18 BEVEL DOWN (BOX OF 25) BLADE CCW-47 X 108 X 4 X 11 BEVEL UP (BOX OF 25)... OPT OPT BLADE CW-47 X 108 X 4 X 18 BEVEL DOWN (BOX OF 25) BLADE CW-47 X 108 X 4 X 11 BEVEL UP (BOX OF 25)... OPT OPT ACCELERATOR CCW GS= ACCELERATOR CW GS= SUPPORT CRADLE, LH SUPPORT CRADLE, RH COVER DEFLECTOR DRIVEN, CAGE DEFLECTOR DRIVEN (16 FT ONLY) GUARD ROCK WELDT PLATE TALL CROP FEED 16 FT (See Note 2) PLATE TOP (16 FT Only) SHOE LH WELDMENT SHOE RH WELDMENT SHOE REPAIR KIT (Includes LH And RH Shoes, welding required)... A/R A/R A BOLT HEX HD 3/8 NC X 1.0 LG GR 5 ZP B NUT CENTER LOCK UNC GR 5 ZP C NUT FLG LOCK PREV TORQUE SM FACE M D NUT FLANGE DT SMOOTH FACE UNC E BOLT SHOULDER, BLADE PIVOT F NUT FLANGE, STOVER LOCK, M12 G BOLT HH FLANGE M12 X 1.75 X 25 LG ZP H BOLT HH FLANGE M12 X 1.75 X 30 LG ZP J BOLT HH FLANGE M12 X 1.75 X 45 LG ZP K BOLT RHSN 3/8 NC X 0.75 GR 5 ZP L BOLT RHSN 3/8 NC X 1.0 GR 5 ZP M BOLT RHSN 3/8 NC X 2.0 LG GR 5 ZP P BOLT RHSSN 3/8 NC X 1.0 GR 5 ZP Q BOLT HH 5/8 NC X 1.75 LG GR 5 ZP WITH PATCH R BOLT SOCKET HD 1/2 NC X 1.5 GR 8 ZP S BOLT RHSSN 1/2 NC X 1.0 GR 5 ZP T NUT FLANGE LOCK SM FACE DT UNC GR 5 U BOLT FLANGE HD 3/8 NC x 1.0 GR 5 ZP NOTE: 1. Use kit MD # to service MD # cutterbars. 2. Two tall crop feed plates (MD #148220) are shipped with the 16 ft. stored at the RH end panel. 5

8 6 CUTTERBAR 10-DISC CUTTERBAR ILLUSTRATED SEE LIST FOR 8-DISC CUTTERBAR PARTS

9 CUTTERBAR 7 REF PART DESCRIPTION QTY 16FT 13FT SERIAL 1 NSS CUTTERBED COVER SPINDLE ASSEMBLY, SHORT (Includes items #4 12) SPINDLE ASSEMBLY, TALL C/W KEY (Incl. items #6 14) NSS FLANGE SPINDLE, SHORT GEAR SPINDLE, SHORT LOCKNUT BELLEVILLE SPRING SNAP RING NSS MOUNTING SPINDLE SNAP RING SPACER BEARING NSS FLANGE SPINDLE, TALL GEAR SPINDLE, TALL KEY SPINDLE SHEAR (NOT ILLUSTRATED) PIN BOLT SHIM SNAP RING BEARING GEAR ASSEMBLY, 45T (Includes item #19) GEAR ASSEMBLY, 35T (Includes item #19) PIN PLUG SCREW HEX. NUT BOLT SCREW BOLT BOLT WASHER SCREW HEX NUT SCREW BAR TAPPED B4905 KIT CUTTERBAR REPAIR TOOL (Kits available through Whole Goods only)

10 8 CONDITIONER & CROP LIFTING ROLL ASSEMBLY

11 CONDITIONER & CROP LIFTING ROLL ASSEMBLY REF PART QTY SERIAL DESCRIPTION 16FT 13FT 1 NSS ASSEMBLY COND. PANEL FLANGE FLANGE FLANGE FLANGE ROLL WELDT, BALANCED SHAFT WELDMENT LH SHAFT WELDMENT RH ROLL CROP LIFTING, BALANCED SHAFT LH SUB-WELDT SHAFT RH SUB-WELDT PLATE MACHINING BEARING SPH OD CW COLLAR 1.5 IN. BORE BEARING BALL SPH OD CW LC (1 3/8 IN. BORE) SHIELD LH SHIELD LH SHIELD RH SHIELD RH PLATE ROLL MOUNT STOP CONDITIONER ROLL WELDT STUD COVER CONDITIONER, ROTARY SUPPORT LH SUPPORT RH ARM LH C/W BUSHING, DECAL ARM RH C/W BUSHING, DECAL BUSHING PIVOT ROLL ADJUSTMENT SUPPORT LH, SP HEADER ONLY SUPPORT RH, SP HEADER ONLY PLATE BEARING SHIELD, OUTER PLATE BEARING SHIELD, INNER PIN ROLL ANGLE SHIELD, LH ANGLE SHIELD, LH WASHER FLAT A BOLT RHSN 1/2 NC X 1 GR 5 ZP B BOLT RHSN 1/2 NC X 1.25 GR 5 ZP C NUT FLANGE LOCK SM FACE DT UNC GR 5 D 4761 WASHER FLAT E BOLT RHSN 3/8 NC X 1.0 GR 5 ZP F BOLT RHSN 1/2 NC X 1 GR 5 ZP G BOLT HH FLG (SERR FACE) 1/2 NC X 1.0 GR 5 ZP H BOLT RHSN 1/2 NC X 1.25 GR 5 ZP J BOLT HH 1/2 NC X 3.0 LG GR 5 ZP K BOLT HH 3/4 NC X 4.5 LG GR 5 ZP L NUT FLANGE DT SMTH FACE UNC M NUT FLANGE DT SMTH FACE UNC GR. G N WASHER PLASTIC P NUT HEX 3/4-10 UNC GR 5 ZP Q BOLT RHSSN 3/8 NC X 3/4 GR 5 ZP R BOLT RHSSN 1/2 NC X 1 GR 5 ZP S BOLT RHSN 3/8 NC X 1.5 T BOLT RHSN 1/2 NC X 1.5 U BOLT HH 1/2 NC x 1.25 GR 5 ZP 9

12 10 PULL-TYPE FORMING SHIELDS

13 PULL-TYPE FORMING SHIELDS 11 REF PART DESCRIPTION QTY 16FT 13FT SERIAL COVER TOP FORMING SHIELD DEFLECTOR REAR PLATE DEFLECTOR LH FRONT DEFLECTOR RH FRONT DEFLECTOR LH SIDE, INNER DEFLECTOR RH SIDE, INNER BAFFLE HANDLE DEFLECTOR FIN, LH DEFLECTOR FIN, RH DEFLECTOR LH SIDE, OUTER C/W REFLECTOR DEFLECTOR RH SIDE, OUTER C/W REFLECTOR PLATE REINFORCEMENT A WASHER FLAT, 14 MM SQ HOLE, 47 MM O.D., 3 MM THK B NUT HEX LOCK DT UNC C BOLT RHSN 1/2 NC X 1.25 GR 5 ZP D BOLT HEX HD UNC X 0.75 LG E BOLT RHSSN 3/8 NC X 0.75 LG GR 5 ZP F NUT FLANGE DT SMOOTH FACE UNC G BOLT RHSN 1/2 NC X 1.75 LG GR 5 ZP H WASHER RUBBER, 20 MM I.D., 45 MM O.D., 6.4 MM THK J BOLT HH 1/2 NC X 7.0 LG GR 5 ZP K NUT FLANGE LOCK SM FACE DT UNC GR 5 L BOLT RHSN 1/2 NC X 1.0 GR 5 ZP M WASHER FLAT, 10 MM I.D., 32 MM O.D., 3 MM THK N BOLT RHSN 3/8 NC X 1.0 GR 5 ZP

14 12 SP HEADER FORMING SHIELDS

15 SP HEADER FORMING SHIELDS 13 REF PART DESCRIPTION QTY 16FT 13FT SERIAL B5225 KIT FORMING SHIELD, SP WINDROWER (Kits available through Whole Goods only) COVER FORMING SHIELD BRACKET FORMING SHIELD, LH BRACKET FORMING SHIELD, RH CHANNEL FRONT MOUNTING BAFFLE REAR ANGLE REAR DEFLECTOR SIDE, LH DEFLECTOR SIDE, RH DEFLECTOR INNER, LH DEFLECTOR INNER, RH ROD ADJUSTER PIN CLEVIS, 1/2 X 2 INCH EFFECTIVE LENGTH PIN LYNCH STRAP RUBBER HANDLE BAFFLE ADJUSTMENT WASHER FLAT, 13.5 MM I.D., 47 MM O.D., 3 MM THICK WASHER RUBBER BOLT HEX HEAD, 5/8 NC X 7 INCH, GR PIN HAIR SPACER TUBE, TRACTOR MOUNTED WASHER FLAT HARDENED PLATE SPACER A NUT SMOOTH FLANGE, 5/8 NC, DT B BOLT RHSN, 5/8 NC X 1-1/4 INCH, GR 5 C NUT SMOOTH FLANGE, 1/2 NC, DT D BOLT HEX HEAD, 1/2 NC X 1 INCH, GR 5 E BOLT RHSN, 1/2 NC X 1-1/2 INCH, GR 5 F BOLT RHSN, 3/8 NC X 3/4 INCH, GR 5 G NUT SMOOTH FLANGE, 3/8 NC, DT H WASHER FLAT, 21/32 INCH I.D. J BOLT HEX HEAD, 1/2 NC X 7-1/2 INCH, GR 5 K PIN COTTER 5/32 X 1-1/2 INCH L NUT HEX JAM, 5/8 NC M WASHER FLAT, 13/16 INCH I.D. N NUT LOCK, 1/2 NC, DT P BOLT HH 1/2 NC X 3.25 LG GR 5 ZP Q NUT FLANGE LOCK SM FACE DT UNC GR 5 R BOLT HH 1/2 NC X 5.0 LG GR 5 ZP

16 14 CUTTERBAR & ROLLS ASSEMBLY 13 FT HEADER ILLUSTRATED SEE LIST FOR 16 FT HEADER PARTS

17 CUTTERBAR & ROLLS ASSEMBLY 15 REF PART DESCRIPTION QTY 16FT 13FT SERIAL GUARD RH GUARD LH SPACER SPRING EXTENSION BRACKET INSERT SPRING BAR INSERT SPRING BAR A BOLT RHSN 3/8 NC X 2.25 LG GR 5 ZP B BOLT HH 3/8 NC X 1.5 LG GR 5 ZP C BOLT RHSN 1/2 NC X 1.25 GR 5 ZP D WASHER HARDENED E BOLT HH (MIN THD) 5/8 NC X 7.5 LG GR 5 ZP F BOLT HH 3/4 NC X 3 G BOLT RHSN 1/2 NC X 1.25 GR 5 ZP H BOLT HEX HD UNC X 1.50 J NUT FLANGE DT SMOOTH FACE UNC K NUT FLANGE DT SMOOTH FACE UNC L NUT FLANGE LOCK SM FACE DT UNC GR 5 M BOLT RHSN 3/8 NC x 1 N BOLT HH 3/4 x 2.5 P WASHER HARDENED Q NUT FLANGE DT SM FACE 3/4 NC R NUT HEX 3/4 NC

18 16 HEADER DRIVES

19 HEADER DRIVES 17 REF PART DESCRIPTION QTY 16FT 13FT SERIAL GEARBOX (See following pages for service parts) GEARBOX BEARING SEAL SHIM GEAR HUB MACHINING SHAFT TAPERED KEY PULLEY MACHINING DRIVELINE UPPER 16 FT (Includes items #8 10) DRIVELINE UPPER 13 FT (Includes items #8 10) YOKE CLAMP CROSS JOURNAL YOKE FLANGE JOINT ASSEMBLY (Includes items #8, #9, #12) See Note YOKE CLAMP See Note BUSHING SPLIT TAPER SHAFT 16 FT ROTARY See Note SHAFT 13 FT ROTARY See Note KEY WOODRUFF (3/8 X 1-1/4 NOM.) IDLER ARM ASSY (Includes item #17) BUSHING FLANGED 5/8 X 7/8 X 1L FITTING LUBRICATION SPRING ASSEMBLY (Includes item #20, #21) SPRING INSERT MACHINED FITTING 90 STREET ELBOW 3/8 NPT FITTING SHORT NIPPLE 3/8 NPT FITTING REDUCER BUSHING VALVE RELIEF FITTING COUPLING 3/8 NPT PULLEY KEY WOODRUFF (5/16 X 1-3/8 NOM.) BELT CONDITIONER DRIVE PULLEY IDLER UNIVERSAL JOINT (Includes items #9, #32) YOKE GUARD GUARD SHIELD ROTARY DEFLECTOR DRIVELINE, LOWER TELESCOPING 16 FT (Includes items #8, #9, and decal) DRIVELINE, LOWER TELESCOPING 13 FT NOTE: For units with serial number and prior: if items #11, #12, or #14 are not available through Service Parts, item #36 will be substituted. See next page for hardware.

20 18 HEADER DRIVES (Continued)

21 HEADER DRIVES (Continued) 19 REF PART DESCRIPTION QTY 16FT 13FT SERIAL A NUT HEX 5/8-11 UNC GR 5 ZP B WASHER SAE FLAT 17/32 I.D. X 1-1/16 IN. O.D. ZP C WASHER SAE FLAT 21/32 I.D. X 1-5/16 IN. O.D. ZP D WASHER REG. LOCK 1/2 IN. NOM. I.D. ZP E BOLT HH 1/2 NC X 1.5 LG TFL GR 5 ZP F BOLT RHSN 3/8 NC X 1.0 GR 5 ZP G BOLT RHSN 3/8 NC X 0.75 GR 5 ZP H BOLT HH 1/2 NC X 1.25 LG GR 5 ZP J BOLT HH 1/2 NC X 3.5 LG GR 5 ZP K BOLT HH 1/2 NC X 2.75 LG GR 5 ZP L NUT FLANGE DT SMOOTH FACE UNC M BOLT HH 5/8 NC X 3.0 GR 5 ZP N BOLT HH 5/8 NC X 4.5 TFL GR 5 ZP P NUT FLANGE LOCK SM FACE DT UNC GR 5 Q NUT FLANGE DT SMOOTH FACE UNC R BOLT HH 1/2 NC X 1.0 LG GR 8 ZP WITH PATCH S BOLT HH FLANGE M12 X 1.75 X 25 LG ZP T BOLT HH 5/8 NC X 6.0 LG GR 5 ZP U WASHER V BOLT HH FLG (SERR FACE) 3/8 NC X 0.75 GR 5 ZP

22 20 HEADER DRIVE GEARBOX

23 HEADER DRIVE GEARBOX 21 REF PART DESCRIPTION QTY 16FT 13FT SERIAL BEARING SEAL SEAL SHIM SHIM BEARING RING FITTING SHIM SEAL

24 22 CROP LIFT ROLL DRIVE IDLER ASSEMBLY 16 FT HEADER ILLUSTRATED SEE LIST FOR 13 FT HEADER PARTS

25 CROP LIFT ROLL DRIVE IDLER ASSEMBLY 23 REF PART DESCRIPTION QTY 16FT 13FT SERIAL ARM MACHINING PULLEY IDLER ASSY (Includes items #15 and #16) BEARING BALL CYL SPACER SPACER PULLEY STRAIGHT BORE KEY GUARD WELDMENT BUSHING SPLIT TAPER TYPE P1 C/W OUTER KEY AND BOLTS PULLEY KIT UPGRADE (Incl. pulley and items #7 9) PULLEY BELT V, MATCHED SET OF PLATE SPRING COMPRESSION PLATE ROLL TIMING GAGE BEARING BALL RING RETAINING A WASHER SAE FLAT 13/16 I.D. X 1.5 IN. O.D. ZP B WASHER REG. LOCK 5/8 IN. NOM. I.D. ZP C NUT HEX LOCK DT 5/8-11 UNC ZP D BOLT HH 5/8 NC X 3.0 LG GR 5 ZP E BOLT HEX HD UNC X 1.50 F BOLT SHOULDER UNC G WASHER FLAT, PLATED H BOLT HH FLG (SERR FACE) 3/8 NC X 0.75 GR 5 ZP J NUT FLANGE DT SMOOTH FACE UNC K NUT FLANGE DT SMOOTH FACE UNC L BOLT RHSN 3/8 NC X 1.25 GR 5 ZP M BOLT RHSN 1/2 NC X 1 GR 5 ZP N NUT FLANGE LOCK SM FACE DT UNC GR 5

26 24 SUSPENDED ROTARY CAGES DRIVES 16 FT HEADER ILLUSTRATED SUSPENDED CAGES ARE NOT USED ON 13 FT HEADERS

27 SUSPENDED ROTARY CAGES DRIVES 25 REF PART DESCRIPTION QTY 16FT 13FT SERIAL SHAFT MACHINING HOUSING WELDT C/W BOLTS DEFLECTOR DRIVEN ANGLE KEY WOODRUFF (5/16 X 1 NOM.) SHAFT SPLINED PULLEY STR BOR BEARING RADIAL BALL 72MM O.D. X BORE HOUSING MACHINING SPACER KEY WOODRUFF (5/16 X 1-1/8 NOM.) RING RETAINING EXTERNAL (1.375 DIA. SHAFT) ANGLE PULLEY KIT (Includes pulley , hub , and two of bolt K) PULLEY MODIFIED, 4-HOLE BUSHING SPLIT TAPER TYPE H C/W KEY AND BOLTS (See Note 1) BUSHING SPLIT TAPER TYPE H C/W KEY AND BOLTS (Modified) BELT V, MATCHED SET OF A NUT HEX 1/2-13 UNC GR 5 ZP B WASHER REG. LOCK 5/8 IN. NOM. I.D. ZP C BOLT HH FLG (SERR FACE) 1/2 NC X 1.0 GR 5 ZP D BOLT RHSN 1/2 NC X 1.25 GR 5 ZP E BOLT HH 1/2 NC X 1.25 LG GR 5 ZP F BOLT HEX HD UNC X 1.50 G BOLT HH 1/2 NC X 4.0 TFL GR 5 ZP H NUT FLANGE LOCK SM FACE DT UNC GR 5 J WASHER FLAT, PLATED K BOLT HH 5/16 NC X 1.0 LG GR 5 ZP NOTE: 1. For item #15, order bushing hub for units with serial number and below only if original pulley, #item 14, remains in use. If new pulley is also required order pulley kit , which includes new design pulley and hub.

28 26 HEADER FRONT SHIELDS 16 FT HEADER ILLUSTRATED SEE LIST FOR 13 FT HEADER PARTS

29 HEADER FRONT SHIELDS 27 REF PART DESCRIPTION QTY 16FT 13FT SERIAL COVER C/W DECALS SHIELD DOOR LINER COVER ANGLE SUPPORT CENTER SHIELD, 16 FT SUPPORT CENTER SHIELD, 13 FT SHIELD RUBBER CENTER, 16 FT SHIELD RUBBER CENTER, 13 FT SHIELD CORNER PLATE CLAMP SUPPORT DIVIDER STRIP ANTI SLIP A BOLT FLANGE (SERR FACE) UNC X 0.50 LG B BOLT SHOULDER UNC C NUT FLANGE DT SMOOTH FACE UNC D BOLT HH FLG (SERR FACE) 3/8 NC X 0.75 GR 5 ZP E BOLT RHSSN 3/8 NC X 0.75 LG GR 5 ZP F BOLT FLANGE (SERR FACE) UNC X 0.50 LG H NUT FLANGE DT SMOOTH FACE UNC J SCREW MACHINE, 3/8 X 0.50 LG ZP K NUT FLANGE LOCK SM FACE DT UNC GR 5 L BOLT RHSN 1/2 NC X 1 GR 5 ZP M BOLT RHSSN, 3/8 NC X 1 GR 5 ZP N SCREW MACHINE, TORX TRUSS HEAD, 3/8 X 0.75 LG NOTE: For special components required for CE (European) units, refer to Section Tool Operated Shield Latches, page 114.

30 28 HEADER REAR SHIELDS 16 FT HEADER ILLUSTRATED SEE LIST FOR 13 FT HEADER PARTS

31 HEADER REAR SHIELDS 29 REF PART DESCRIPTION QTY 16FT 13FT SERIAL SHIELD SWATH BAFFLE WELDT HANDLE VINYL BRACKET SWATH BAFFLE SHIELD C/W DECALS, UPPER REAR, 16 FT ROTARY, LH SHIELD C/W DECALS, UPPER REAR, 13 FT ROTARY, LH SHIELD C/W DECAL UPPER REAR, 16 FT ROTARY, RH SHIELD C/W DECAL, UPPER REAR, 13 FT ROTARY, RH RETAINER PIN SHIELD WELDT REAR HINGED, 16 FT ROTARY, LH SHIELD WELDT REAR HINGED, 13 FT ROTARY, LH SHIELD WELDT REAR HINGED, 16 FT ROTARY, RH SHIELD WELDT REAR HINGED, 13 FT ROTARY, RH PIN DRIVELINE SHIELD, 16 FT ROTARY PIN SHIELD, 13 FT ROTARY SHIELD LOWER REAR, 16 FT ROTARY, LH SHIELD LOWER REAR, 16 FT ROTARY, LH SHIELD LOWER REAR, 13 FT ROTARY, LH SHIELD LOWER REAR, 13 FT ROTARY, LH SHIELD LOWER REAR, 16 FT ROTARY, RH SHIELD LOWER REAR, 13 FT ROTARY, RH LATCH RUBBER FIN SWATH BAFFLE A BOLT RHSN 3/8 NC X 2.25 LG GR 5 ZP B BOLT RHSN 1/2 NC X 1.25 GR 5 ZP C BOLT HEX HD UNC X 0.75 LG D NUT FLANGE DT SMOOTH FACE UNC E WASHER SAE FLAT 13/32 I.D. X 13/16 IN. O.D. ZP F BOLT HEX HD 3/8 NC X 1.0 LG GR 5 ZP G BOLT RHSN 3/8 NC X 1.75 LG GR 5 ZP H NUT HEX 3/8-16 UNC GR 5 ZP J BOLT RHSSN 1/2 NC X 1.0 GR 5 ZP K NUT FLANGE LOCK SM FACE DT UNC GR 5 L WASHER SAE FLAT 17/32 I.D. X 1-1/16 IN. O.D. ZP M BOLT HH 1/2 NC X 1.0 LG GR 5 ZP NOTE: 1. For 2006 and 2007 units (serial number and prior) when replacing any of items #4, #7, #11, or #5, #6, #12, also replace the other two shields. 2. For special components required for CE (European) units, refer to Section Tool Operated Shield Latches on page 114.

32 30 SELF-PROPELLED CONFIGURATION 16 FT HEADER ILLUSTRATED SEE LIST FOR 13 FT HEADER PARTS

33 REF PART SELF-PROPELLED CONFIGURATION DESCRIPTION QTY 16FT 13FT 31 SERIAL SUPPORT WELDMENT SPACER PLATE SHIELD LH C/W DECAL DEFLECTOR LH DEFLECTOR RH REF Refer to Section Lift Boots, page 70. A BOLT HH FLG (SERR FACE) 1/2 NC X 1.25 GR 5 ZP B BOLT RHSN 1/2 NC X 1 GR 5 ZP C BOLT HH FLG (SERR FACE) 1/2 NC X 0.75 GR 5 ZP D BOLT HEX HD 3/4 NC, SPECIAL E NUT HEX LOCK DT UNC F WASHER SAE FLAT 13/16 I.D. X 1.5 IN. O.D. ZP G BOLT HH FLG (SERR FACE) 3/8 NC X 0.75 GR 5 ZP K BOLT RHSN 3/8 NC X 1.25 LG GR 5 ZP L BOLT RHSN 1/2 NC X 1.25 GR 5 ZP M NUT FLANGE LOCK SM FACE DT UNC GR 5 N BOLT RHSSN 3/8 NC X 0.75 LG GR 5 ZP P NUT FLANGE DT SMOOTH FACE UNC Q BOLT HH 3/4 NC X 7.0 LG GR 5 ZP R NUT FLANGE DT SMTH FACE UNC GR. G S BOLT HH 3/4 NC X 5.5 LG GR 5 ZP

34 32 CARRIER ASSEMBLY

35 CARRIER ASSEMBLY 33 REF PART DESCRIPTION QTY 16FT 13FT SERIAL ASSEMBLY LIGHT BRACKET, LH 13 FT (SHOWN) ASSEMBLY LIGHT BRACKET, LH 16 FT ASSEMBLY LIGHT BRACKET, RH 13 FT (SHOWN) ASSEMBLY LIGHT BRACKET, RH 16 FT CASE MANUALS LAMP AMBER NSS REPLACEMENT BULB #1156 (See retailer) LENS AMBER, REPLACEMENT PLUG PLASTIC SNAP-IN HUB C/W BEARING CUPS (Items #10 11) & GREASE FITTING BEARING CONE BEARING CONE ROLLER SEAL GREASE OUTER CUP INNER CUP CAP DUST SPINDLE 13 FT SPINDLE 16 FT BRACKET WITH REFLECTOR, 13 FT SHIELD LH C/W DECAL & REFLECTOR 13 FT (SHOWN) SHIELD LH C/W DECAL 16 FT SUPPORT PT ROTARY CENTER LINK HITCH PIN WELDMENT HITCH PIN WELDMENT PIN COTTER 3/16 DIA X 1.5 ZP PIN CLEVIS PIN CLEVIS WHEEL 16 X 8, 6-BOLT WHEEL WIIC 16.1, 6-BOLT TIRE X 16, F2 FRONT STEER TIRE, 8 PLY TIRE 14L X 16.1 SL, I1, 8 PLY STEM TIRE VALVE ASSEMBLY #TR CLAMP HOSES, 16 FT ONLY A WASHER SAE FLAT 13/16 I.D. X 1.5 IN. O.D. ZP B NUT HEX LOCK DT UNC C BOLT 90 WHEEL 9/16 NF X 1.75 OL D NUT HEX SLOTTED UNF E BOLT HH 5/8 NC X 1.75 LG GR 8 ZP F NUT FLANGE DT SMOOTH FACE UNC GR. G G BOLT HH 1/2 NC X 3.25 LG GR 5 ZP H BOLT HH FLG (SERR FACE) 1/2 NC X 1.25 GR 5 ZP J WASHER FLAT K NUT FLANGE LOCK SM FACE DT UNC GR 5 L BOLT HH FLG (SERR FACE) 1/2 NC X 0.75 GR 5 ZP M NUT HEX LOCK DT 1/4-20 UNC ZP N BOLT RHSN 1/2 NC X 1 GR 5 ZP P BOLT HH FLG (SERR FACE) 3/8 NC X 0.75 GR 5 ZP Q BOLT RHSN 1/4 NC X GR 5 ZP R WASHER SAE FLAT 9/32 I.D. X 5/8 IN. O.D. ZP S BOLT RHSSN 3/8 x 3/4 T NUT FLANGE, 3/8-16 UNC, ZN PL, GR 5 U BOLT RHSSN 1/2 x 1.25 GR 5 ZP

36 34 CARRIER FRAME COMPONENTS

37 CARRIER FRAME COMPONENTS 35 REF PART DESCRIPTION QTY 16FT 13FT SERIAL ARM LH (Includes items #3, #4) ARM RH (Includes items #3, #4) FTG LUBE 1/4-28 UNF, BUSHING STEEL PIN WELDT, WHEEL ARM ARM C/W BUSHINGS BUSHING RUBBER ARM LINK SPACER WASHER PIN CLEVIS PIN COTTER 1/4 DIA X 2 ZP CYLINDER HYDRAULIC SEAL KIT FITTING ELBOW 90 HYD FITTING ADAPTER HYD FITTING CONNECTOR HYD CYLINDER 2.0 X SEAL KIT VALVE BALL PIN CYLINDER RETAINER PIN HOSE LIFT HOSE LIFT HARNESS WIRING CLAMP DOUBLE HOSE INSULATED, 13/16 IN CLAMP INSULATED 15/16 INCH LIGHT RED TAIL NSS REPLACEMENT BULB #1157 (See your MacDon Dealer) LENS RED, REPLACEMENT LENS BLACK, REPLACEMENT HOOK SPRING A BOLT HH 3/4 NC X 6.0 LG GR 8 ZP B WASHER SAE FLAT 13/16 I.D. X 1.5 IN. O.D. ZP C NUT FLANGE DT SMTH FACE UNC GR. G D BOLT RHSN 3/8 NC X 1.25 LG GR 5 ZP E NUT FLANGE DT SMOOTH FACE UNC F BOLT HH 3/4 NC X 7.0 LG GR 5 ZP G BOLT HH 3/4 NC X 1.5 LG GR 5 ZP H NUT HEX, HEAVY 3/4-10 UNC GR 5 ZP

38 36 CARRIER SPRINGS

39 CARRIER SPRINGS 37 REF PART DESCRIPTION QTY 16FT 13FT SERIAL PIN CLEVIS INSERT MACH INSERT SPRING MACH HAIR PIN SPRING EXTENSION SPRING EXTENSION, 3/8 WIRE INSERT SPRING, CASTING RING RETAINING, INTERNAL ARM LINK INSERT SPRING, YOKE ARM LINK A NUT HEX 3/4-10 UNC GR 5 ZP B WASHER SAE FLAT 13/16 I.D. X 1.5 IN. O.D. ZP C WASHER HARDENED D NUT HEX, HEAVY 3/4-10 UNC GR 5 ZP E BOLT HEX HD UNC X 20.5 TFL GR 5

40 38 HITCH HYDRAULIC DRIVE (S.N & BELOW)

41 39 HITCH HYDRAULIC DRIVE (S.N & BELOW) REF PART DESCRIPTION QTY 16FT 13FT SERIAL DRIVE GEARBOX (Refer to following pages for service parts) PUMP BENT AXIS PISTON SEAL KIT FITTING ADAPTER, HYDRAULIC FLANGE HALF SPLIT, 3/ O-RING FLANGE HALF SPLIT, 1 INCH O-RING FITTING BARBED, 90 DEGREE DRIVELINE MAIN (Includes items #10 13 C/W decal) CROSS YOKE DRIVELINE SHIELD SHIELD REPAIR KIT BRACKET WELDMENT HOSE CASE DRAIN HOSE HIGH PRESSURE PIVOT MACHINING PIN LYNCH, 3/16 X 1-9/16 IN PIN STRAIGHT RING EXT RETAINING BUSHING 102 I.D. X 111 O.D. X 38 LONG CHANNEL HOOK CLIP PIVOT MACHINING FITTING LUBE 1/4-28 UNF O-RING JACK HOSE SUCTION CLAMP T-BOLT FITTING CONNECTOR HYD WASHER THRUST A BOLT HH FLANGE M12 X 1.75 X 45 LG ZP B BOLT HH FLANGE M12 X 1.75 X 25 LG ZP C BOLT HEX HD 3/8 NC X 1.5 LG GR 5 ZP D NUT FLANGE DT SMOOTH FACE UNC E BOLT HEX HD 3/8 NC X 1.0 LG GR 5 ZP F BOLT HEX HD UNC X 1.75 GR 5 ZP G NUT FLANGE DT SMOOTH FACE UNC H WASHER SAE FLAT 13/32 I.D. X 13/16 IN. O.D. ZP J BOLT SHOULDER UNC K WASHER SAE FLAT 21/32 I.D. X 1-5/16 IN. O.D. ZP L BOLT HH FLG (SERR FACE) 3/8 NC X 1.0 GR 5 ZP M BOLT HH M12 X 1.75 X 40 LG ZP N WASHER ASSEMBLY SPHERICAL 12 MM P BOLT HH 1/2 NC X 3.0 LG GR 5 ZP Q NUT FLANGE LOCK SM FACE DT UNC GR 5 R BOLT HEX HD 3/8 NC X 1.25 LG GR 5 ZP S WASHER REG. LOCK 3/8 IN. NOM. I.D. ZP T WASHER FLAT U WASHER HARDENED

42 40 HITCH HYDRAULIC DRIVE S.N & ABOVE with BOSCH PUMP

43 HITCH HYDRAULIC DRIVE S.N & ABOVE with BOSCH PUMP 41 REF PART DESCRIPTION QTY 16FT 13FT SERIAL DRIVE GEARBOX (Refer to following pages for service parts) PUMP BENT AXIS PISTON SEAL KIT FITTING ADAPTER, HYDRAULIC FLANGE HALF SPLIT, 3/ O-RING FLANGE HALF SPLIT, 1 INCH O-RING FITTING BARBED, 90 DEGREE DRIVELINE MAIN (Includes items #10 13 C/W decal) CROSS YOKE DRIVELINE SHIELD SHIELD REPAIR KIT BRACKET WELDMENT HOSE CASE DRAIN (Pump to port into front of hitch) HOSE HIGH PRESSURE PIVOT MACHINING FITTING HYD 90 ELBOW (Connects to item #19) HOSE CASE DRAIN (Pump to hyd. line at front of hitch) RING EXT RETAINING BUSHING 102 I.D. X 111 O.D. X 38 LONG CHANNEL HOOK CLIP PIVOT MACHINING FITTING LUBE 1/4-28 UNF O-RING JACK HOSE SUCTION CLAMP T-BOLT FITTING HYD 45 ELBOW (Connects to item #15) WASHER THRUST A BOLT HH FLANGE M12 X 1.75 X 45 LG ZP B BOLT HH FLANGE M12 X 1.75 X 25 LG ZP C BOLT HEX HD 3/8 NC X 1.5 LG GR 5 ZP D NUT FLANGE DT SMOOTH FACE UNC E BOLT HEX HD 3/8 NC X 1.0 LG GR 5 ZP F BOLT HEX HD UNC X 175 GR 5 ZP G NUT FLANGE DT SMOOTH FACE UNC H WASHER SAE FLAT 13/32 I.D. X 13/16 IN. O.D. ZP J BOLT SHOULDER UNC K WASHER SAE FLAT 21/32 I.D. X 1-5/16 IN. O.D. ZP L BOLT HH FLG (SERR FACE) 3/8 NC X 1.0 GR 5 ZP M BOLT HH M12 X 1.75 X 40 LG ZP N WASHER ASSEMBLY SPHERICAL 12 MM P BOLT HH 1/2 NC X 3.0 LG GR 5 ZP Q NUT FLANGE LOCK SM FACE DT UNC GR 5 R BOLT HEX HD 3/8 NC X 1.25 LG GR 5 ZP S WASHER REG. LOCK 3/8 IN. NOM. I.D. ZP T WASHER FLAT U WASHER HARDENED

44 42 HITCH HYDRAULIC DRIVE S.N & ABOVE with PARKER HANNIFIN PUMP

45 HITCH HYDRAULIC DRIVE S.N & ABOVE with PARKER HANNIFIN PUMP REF PART QTY DESCRIPTION 16FT 13FT DRIVE GEARBOX (Refer to following pages for service parts) PUMP BENT AXIS PISTON SEAL KIT FITTING ADAPTER, HYDRAULIC FLANGE HALF SPLIT, 3/ O-RING FITTING ELBOW 90 HYD ADAPTER SUCTION O-RING DRIVELINE HITCH (Incl. items # C/W decal, North America) DRIVELINE MAIN (Incl. items # C/W decal and shield chain, Export only) CROSS YOKE DRIVELINE SHIELD SHIELD REPAIR KIT BRACKET WELDMENT HOSE CASE HOSE HIGH PRESSURE PIVOT MACHINING GUARD WASHER THRUST RING EXT RETAINING BUSHING 102 I.D. X 111 O.D. X 38 LONG CHANNEL HOOK CLIP PIVOT MACHINING FITTING LUBE 1/4-28 UNF FITTING CONNECTOR HYD JACK HOSE SUCTION CLAMP T-BOLT KIT CE CONVERSION, EXPORT ONLY (Includes 2 chains, decals, instructions, and user manual) SERIAL A BOLT HH FLANGE M12 X 1.75 X 45 LG ZP B BOLT HH FLANGE M12 X 1.75 X 25 LG ZP C BOLT HEX HD 3/8 NC X 1.5 LG GR 5 ZP D NUT FLANGE DT SMOOTH FACE UNC E BOLT HEX HD 3/8 NC X 1.0 LG GR 5 ZP F BOLT HEX HD UNC X 1.75 GR 5 ZP G NUT FLANGE DT SMOOTH FACE UNC H WASHER SAE FLAT 13/32 I.D. X 13/16 IN. O.D. ZP J BOLT SHOULDER UNC K WASHER SAE FLAT 21/32 I.D. X 1-5/16 IN. O.D. ZP L BOLT HH FLG (SERR FACE) 3/8 NC X 1.0 GR 5 ZP M BOLT HH M12 X 1.75 X 40 LG ZP N WASHER ASSEMBLY SPHERICAL 12 MM P BOLT HH 1/2 NC X 3.0 LG GR 5 ZP Q NUT FLANGE LOCK SM FACE DT UNC GR 5 R BOLT HEX HD 7/16 NC X 1.75 LG GR 5 ZP S WASHER REG. LOCK 7/16 IN. NOM. I.D. ZP T WASHER FLAT U BOLT RHSN, 1/2 NC x 1-1/4 V WASHER HARDENED

46 44 HITCH DRIVE GEARBOX

47 HITCH DRIVE GEARBOX 45 REF PART DESCRIPTION See Note 1 QTY See Note 2 SERIAL SEAL RING BEARING KEY (For upper shaft and gear connection) GEAR GEAR FITTING PLUG, 1/2 IN. GAS SHAFT FITTING PLUG, 3/8 IN. GAS INDICATOR OIL LEVEL GEAR WITH SHAFT GEAR CAP BREATHER BEARING SEAL NSS MOUNTING FLANGE SHAFT LOWER KEY (For lower shaft and gear connection) CAP NOTE: 1. Gearbox used Serial Number and above with Parker Hannifin pump. 2. Gearbox used Serial Number and above with Bosch pump and Serial Number and below.

48 46 FRONT HALF DRIVELINES

49 FRONT HALF DRIVELINES 47 REF PART DESCRIPTION QTY 16FT 13FT SERIAL DRIVELINE 1.75 IN 20 T FRONT HALF (FOR STANDARD DRAWBAR HITCH) DRIVELINE, C/W DECALS NORTH AMERICA DRIVELINE, C/W DECALS AND SHIELD CHAIN EXPORT YOKE YOKE REPAIR KIT SHIELD, C/W DECAL SHIELD REPAIR KIT CROSS KIT CE CONVERSION (EXPORT ONLY)... A/R A/R (Includes 2 chains, decals, instructions, and user manual) DRIVELINE IN 21 T FRONT HALF (FOR STANDARD DRAWBAR HITCH) DRIVELINE, C/W DECALS NORTH AMERICA DRIVELINE, C/W DECALS AND SHIELD CHAIN EXPORT YOKE YOKE REPAIR KIT SHIELD, C/W Decal SHIELD REPAIR KIT CROSS KIT CE CONVERSION (EXPORT ONLY)... A/R A/R (Includes 2 chains, decals, instructions, and user manual) DRIVELINE 1.75 IN 20 T FRONT HALF (FOR 3-POINT HITCH) DRIVELINE, C/W DECALS NORTH AMERICA DRIVELINE, C/W DECALS AND SHIELD CHAIN EXPORT YOKE YOKE REPAIR KIT SHIELD, C/W DECAL SHIELD REPAIR KIT CROSS KIT CE CONVERSION (EXPORT ONLY)... A/R A/R (Includes 2 chains, decals, instructions, and user manual) DRIVELINE IN 21 T FRONT HALF (FOR 3-POINT HITCH) DRIVELINE, C/W DECALS NORTH AMERICA DRIVELINE, C/W DECALS AND SHIELD CHAIN EXPORT YOKE YOKE REPAIR KIT SHIELD, C/W Decal SHIELD REPAIR KIT CROSS KIT CE CONVERSION (EXPORT ONLY)... A/R A/R (Includes 2 chains, decals, instructions, and user manual)

50 48 HITCH HYDRAULICS & ELECTRICAL S.N & BELOW

51 HITCH HYDRAULICS & ELECTRICAL S.N & BELOW 49 REF PART DESCRIPTION QTY 16FT 13FT SERIAL 1 REF HITCH ASSEMBLY FILTER HEAD 1-5/8 IN-12 SAE (#20) FILTER ELEMENT 10 MICRON NOMINAL LINE HYDRAULIC HOSE FITTING TEE HYD FITTING CONNECTOR HYD FITTING CONNECTOR HYD LINE HYDRAULIC LINE HYDRAULIC CLAMP PLATE PLATE FITTING UNION HYD FITTING UNION HYD HOSE RETURN FITTING ELBOW, BULKHEAD UNION HYD FITTING ELBOW, BULKHEAD UNION HYD LINE HYDRAULIC VALVE BALL FITTING ELBOW 45 HYD CW O-RING FITTING CONNECTOR HYD RELAY TRANSPORT LIGHTING MODULE HARNESS WIRING HOSE HOSE FITTING COUPLING HYD HOSE CASE DRAIN LINE HYDRAULIC LINE HYDRAULIC HOSE HIGH PRESSURE SLEEVE CAP 3/8 IN. TUBE O-RING ARM WELDMENT CYLINDER HYDRAULIC SEAL KIT FLANGE HALF SLIT FITTING ELBOW HYD FITTING ADAPTER HYD FITTING CONNECTOR HYD VALVE PRESSURE BALANCE FITTING CONNECTOR HYD LINE HYDRAULIC PIN CLEVIS PIN COTTER 1/4 DIA X 2 ZP MOTOR HYDRAULIC, BENT AXIS PISTON SEAL KIT NOTE: Continued on next page.

52 50 HITCH HYDRAULICS & ELECTRICAL (Continued) S.N & BELOW

53 HITCH HYDRAULICS & ELECTRICAL (Continued) S.N & BELOW 51 REF PART DESCRIPTION QTY 16FT 13FT SERIAL O-RING FITTING ELBOW HYD FITTING 3/4 IN. CD 62 X #16 MALE ORS C/W O-RING FITTING VALVE ASSEMBLY VALVE RELIEF SEAL KIT (For valve ) VALVE CHECK SEAL KIT (For valve ) PLUG CW O-RING O-RING O-RING... 1 A NUT HEX LOCK DT UNC B NUT FLANGE LOCK SM FACE DT UNC GR 5 C WASHER FLAT D WASHER REG. LOCK 5/8 IN. NOM. I.D. ZP E WASHER REG. LOCK 3/8 IN. NOM. I.D. ZP F BOLT HH 3/8 NC X 3.5 LG GR 5 ZP G BOLT HH 5/8 NC X 1.25 LG GR 5 ZP WITH PATCH H WASHER J BOLT HEX HEAD 5/8 NC X 1-1/2

54 52 HITCH HYDRAULICS & ELECTRICAL S.N & ABOVE with BOSCH MOTOR

55 HITCH HYDRAULICS & ELECTRICAL S.N & ABOVE with BOSCH MOTOR 53 REF PART DESCRIPTION QTY 16FT 13FT SERIAL 1 REF HITCH ASSEMBLY FILTER HEAD 1-5/8 IN-12 SAE (#20) FILTER ELEMENT 10 MICRON NOMINAL LINE HYDRAULIC HOSE HOSE DRAIN FITTING CONNECTOR HYD FITTING CONNECTOR HYD LINE HYDRAULIC LINE HYDRAULIC CLAMP PLATE PLATE FITTING UNION HYD FITTING UNION HYD HOSE RETURN FITTING ELBOW, BULKHEAD UNION HYD FITTING ELBOW, BULKHEAD UNION HYD FITTING 3/4 IN. CD 62 X #16 MALE ORS C/W O-RING VALVE BALL FITTING ELBOW 45 HYD CW O-RING FITTING CONNECTOR HYD RELAY TRANSPORT LIGHTING MODULE HARNESS WIRING HOSE HOSE FITTING COUPLING HYD HOSE CASE DRAIN LINE HYDRAULIC LINE HYDRAULIC HOSE HIGH PRESSURE SLEEVE CAP 3/8 IN. TUBE O-RING ARM WELDMENT CYLINDER HYDRAULIC SEAL KIT FLANGE HALF SLIT FITTING ELBOW HYD FITTING ADAPTER HYD FITTING CONNECTOR HYD VALVE PRESSURE BALANCE FITTING CONNECTOR HYD LINE HYDRAULIC PIN CLEVIS PIN COTTER 1/4 DIA X 2 ZP MOTOR HYDRAULIC, BENT AXIS PISTON SEAL KIT NOTE: Continued on next page.

56 54 HITCH HYDRAULICS & ELECTRICAL (Continued) S.N & ABOVE with BOSCH MOTOR

57 HITCH HYDRAULICS & ELECTRICAL (Continued) S.N & ABOVE with BOSCH MOTOR 55 REF PART DESCRIPTION QTY 16FT 13FT SERIAL O-RING FITTING ELBOW HYD FITTING VALVE ASSEMBLY VALVE RELIEF SEAL KIT (For valve ) VALVE CHECK SEAL KIT (For valve ) PLUG CW O-RING O-RING O-RING... 1 A NUT HEX LOCK DT UNC B NUT FLANGE LOCK SM FACE DT UNC GR 5 C WASHER FLAT D WASHER REG. LOCK 5/8 IN. NOM. I.D. ZP E WASHER REG. LOCK 3/8 IN. NOM. I.D. ZP F BOLT HH 3/8 NC X 3.5 LG GR 5 ZP G BOLT HH 5/8 NC X 1.25 LG GR 5 ZP WITH PATCH H WASHER J BOLT HEX HEAD 5/8 NC X 1-1/2

58 56 HITCH HYDRAULICS & ELECTRICAL S.N & ABOVE with PARKER HANNIFIN MOTOR

59 HITCH HYDRAULICS & ELECTRICAL S.N & ABOVE with PARKER HANNIFIN MOTOR 57 REF PART DESCRIPTION QTY 16FT 13FT SERIAL 1 REF HITCH ASSEMBLY ARM WELDMENT LINE HYDRAULIC CAP 3/8 IN. TUBE LINE HYDRAULIC LINE HYDRAULIC O-RING HOSE HIGH PRESSURE HOSE RETURN FITTING CONNECTOR HYD FILTER HEAD 1-5/8 IN-12 SAE (#20) FILTER ELEMENT 10 MICRON NOMINAL HOSE DRAIN LINE HYDRAULIC LINE HYDRAULIC SLEEVE MOTOR HYDRAULIC SEAL KIT VALVE C/W MOUNTING HARDWARE (Refer to serviced components on next page) FITTING ELBOW 90 HYD HOSE DRAIN FITTING ADAPTER HYD FITTING CONNECTOR HYD FITTING 3/4 IN. CD 62 X #16 MALE ORS C/W O-RING O-RING (Two included with valve, item #18) FLANGE HALF SPLIT 3/4 IN., CODE HOSE FITTING ELBOW 45 HYD CW O-RING VALVE BALL FITTING CONNECTOR HYD FITTING ELBOW, BULKHEAD UNION HYD LINE HYDRAULIC LINE HYDRAULIC FITTING UNION HYD HOSE CYLINDER HYDRAULIC SEAL KIT FITTING ELBOW HYD FITTING ADAPTER HYD FITTING CONNECTOR HYD VALVE PRESSURE BALANCE FITTING CONNECTOR HYD LINE HYDRAULIC PIN CLEVIS PIN COTTER 1/4 DIA X 2 ZP FITTING COUPLING HYD HOSE FITTING ELBOW, BULKHEAD UNION HYD LINE HYDRAULIC NOTE: Continued on next page.

60 58 HITCH HYDRAULICS & ELECTRICAL (Continued) S.N & ABOVE with PARKER HANNIFIN MOTOR

61 HITCH HYDRAULICS & ELECTRICAL (Continued) S.N & ABOVE with PARKER HANNIFIN MOTOR 59 REF PART DESCRIPTION QTY 16FT 13FT SERIAL LINE HYDRAULIC FITTING UNION HYD HARNESS WIRING HARNESS WIRING PLATE RELAY TRANSPORT LIGHTING MODULE FASTENER CABLE TIE (BLACK) CLAMP PLATE A SCREW MACHINE B NUT SPECIAL C BOLT HH 5/8 NC X 1.25 LG GR 5 ZP WITH PATCH D WASHER E WASHER REG. LOCK 3/8 IN. NOM. I.D. ZP F WASHER REG. LOCK 5/8 IN. NOM. I.D. ZP G NUT HEX LOCK DT UNC H REF (Refer to hardware listed with valve service parts below) J BOLT HEX HD UNC X 1.50 K WASHER FLAT L NUT FLANGE LOCK SM FACE DT UNC GR 5 18 REF VALVE (MD #194101) SERVICED COMPONENTS: PARKER HANNIFIN VALVE VALVE PRESSURE RELIEF O-RING, ITEM # WASHER REG. LOCK 3/8 IN. NOM. I.D. ZP SUN HYDRAULICS VALVE VALVE RELIEF SEAL KIT (For relief valve ) VALVE CHECK SEAL KIT (For check valve ) O-RING, ITEM # BOLT SOCKET HEAD, 3/8-16 UNC, 3.75 IN. LG, BLACK, GR BOLT HEX HEAD, 3/8 NC X 5.0 IN. LG, ZN PL, GR WASHER REG. LOCK 3/8 IN. NOM. I.D. ZP

62 60 HITCH ASSEMBLY

63 HITCH ASSEMBLY 61 REF PART DESCRIPTION QTY 16FT 13FT SERIAL HITCH ASSEMBLY, 13 FT (Includes items #2 9 and decals) HITCH ASSEMBLY, 16 FT (Includes items #2 9 and decals) BUSHING SLEEVE FTG LUBE 90 DEG 1/4-28 TAPER THD PLUG HEX CW O-RING O-RING CAP 1 IN. NPT GAUGE LEVEL PLUG C/W O-RING O-RING FITTING ELBOW HYD PIN CLEVIS PIN LYNCH

64 62 HEADER HYDRAULICS & ELECTRICAL 16 FT SP

65 HEADER HYDRAULICS & ELECTRICAL 16 FT SP 63 REF PART DESCRIPTION QTY 16FT 13FT SERIAL MOTOR HYD SHAFT SEAL FITTING ADAPTER HYD, #8 JIC male x #12 ORB male HOSE SP ROTARY CASE DRAIN COUPLING FEMALE HYD. 3/8 FLAT FACE BULKHEAD FITTING ADAPTER HYD CW O-RING, 1/4 NPTF x #12 ORB male O-RING, SAE #12-1 (For items #2, #5) VALVE RELIEF CAP FLANGE SPLIT (Includes items #9, #10, M, N) O-RING, SAE # FLANGE SPLIT HALF LINE HIGH PRESSURE HOSE 16 FT 40 GPM FITTING ADAPTER HYD cw O-RING, #16 JIC male x #16 ORB male FITTING ELBOW 45 HYD cw O-RING, #16 JIC male x #16 ORB male FITTING ADAPTER HYD cw O-RING, #16 JIC fem. x #16 ORB male LINE RETURN HOSE SECONDARY RETURN FITTING ELBOW HYD cw O-RING, #16 JIC male x #16 ORB male COUPLER MALE HYD. 3/4 IN FLAT FACE 1 IN THD., FASTER SEAL KIT (For 3/4 male coupler) COUPLER FEMALE HYD. 3/4 IN. FLAT FACE, FASTER SEAL KIT (For 3/4 female coupler) PLUG #16 ORB cw O-RING O-RING, SAE #16-1 (For items #13 15, #18, #21) SLEEVE PAD RUBBER SUPPORT HYDRAULIC LINE BRACKET LIGHT, WITH REFLECTORS, LH BRACKET LIGHT, WITH REFLECTORS, RH LAMP AMBER NSS REPLACEMENT BULB #1156 (See retailer) LENS AMBER, REPLACEMENT BRACKET SENDER SPEED HARNESS WIRING, 16 FT SP R80 (Includes items #39 41) GROMMET 1.50 IN. I.D BRACKET WIRING PLUG SUPPORT SUPPORT WELDMENT STRAP VELCRO, HANGING 8 IN NUT CAP, 1 IN. TUBE PAD RUBBER CLAMP PVC INSULATED, 13/16 IN. TUBE SIZE PLUG TUBE FINISHING NUT PANEL, DEUTSCH, HD30, SIZE WASHER LOCK SPRING, DEUTSCH, HD30, SIZE CAP WIRE HARNESS CLIP INSULATED NOTE: See next page for hardware.

66 64 HEADER HYDRAULICS & ELECTRICAL 16 FT SP (Continued)

67 HEADER HYDRAULICS & ELECTRICAL 16 FT SP (Continued) 65 REF PART DESCRIPTION QTY 16FT 13FT SERIAL A BOLT HH M14 X 2 X 35 LG ZP B BOLT HH FLG (SERR FACE) 1/2 NC X 0.75 GR 5 ZP C NUT FLANGE LOCK SM FACE DT UNC GR 5 D BOLT RHSSN 3/8 NC X 0.75 LG GR 5 ZP F NUT FLANGE DT SMOOTH FACE UNC G NUT HEX LOCK DT 1/4-20 UNC ZP H BOLT RHSN 3/8 NC X 1.0 GR 5 ZP J BOLT RHSN 1/2 NC X 1 GR 5 ZP K BOLT RHSN 1/2 NC X 2.5 LG GR 5 ZP L BOLT HEX HD 1/4 NC X 0.75 LG GR 5 ZP M BOLT HH 3/8 NC X 1.25 LG GR 5 ZP N WASHER REG. LOCK 3/8 IN. NOM. I.D. ZP

68 66 HEADER HYDRAULICS & ELECTRICAL 13 FT SP (M200)

69 REF PART HEADER HYDRAULICS & ELECTRICAL 13 FT SP (M200) DESCRIPTION QTY 16FT 13FT 67 SERIAL MOTOR HYD SHAFT SEAL FLANGE SPLIT, 1 IN. C/W HARDWARE (Incl. items #3, #4, K, L) O-RING, SAE # FLANGE SPLIT HALF FITTING ELBOW 45 HYD cw O-RING, #12 JIC male x #12 ORB male HOSE 13 SP ROTARY CASE DRAIN COUPLING FEMALE HYD. 3/8 FLAT FACE BULKHEAD FITTING ADAPTER HYD CW O-RING, 1/4 NPTF x #12 ORB male O-RING, SAE #12-1 (For items #5, #8) VALVE RELIEF CAP LINE HIGH PRESSURE (M200 TO 13 FT ROTARY) HOSE 16 FT 40 GPM FITTING ADAPTER HYD cw O-RING, #16 JIC male x #16 ORB male COUPLER FEMALE HYD. 3/4 IN. FLAT FACE, FASTER SEAL KIT (For 3/4 female coupler) COUPLER MALE HYD. 3/4 IN FLAT FACE 1 IN THD., FASTER SEAL KIT (For 3/4 male coupler) FITTING ELBOW 45 HYD cw O-RING, #16 JIC male x #16 ORB male FITTING ADAPTER HYD cw O-RING, #16 JIC fem. x #16 ORB male NUT CAP, 1 IN. TUBE LINE RETURN (M200 TO 13 FT ROTARY) HOSE SECONDARY RETURN FITTING ELBOW HYD cw O-RING, #16 JIC male x #16 ORB male PLUG #16 ORB CW O-RING O-RING, SAE #16-1 (For items #13, #16, #17, #21, #22) SLEEVE SENDER SPEED BRACKET HARNESS WIRING, 13 FT. SP ROTARY DISC HEADER NUT PANEL, DEUTSCH, HD30, SIZE WASHER LOCK SPRING, DEUTSCH, HD30, SIZE CAP WIRE HARNESS GROMMET 1.50 IN. I.D BRACKET WIRING PLUG SUPPORT SUPPORT WELDMENT STRAP VELCRO, HANGING, 8 IN PLUG TUBE, FINISHING A BOLT HH M14 X 2 X 35 LG ZP B BOLT HEX HD 1/4 NC X 0.75 LG GR 5 ZP C NUT HEX LOCK DT 1/4-20 UNC ZP D BOLT HH FLG (SERR FACE) 1/2 -NC X 0.75 GR 5 ZP E BOLT RHSN 3/8 NC X 1.0 GR 5 ZP F NUT FLANGE DT SMOOTH FACE UNC G BOLT RHSN 1/2 NC X 1.0 GR 5 ZP H NUT FLANGE LOCK SM FACE DT UNC GR 5 J BOLT RHSSN 3/8 NC X 0.75 LG GR 5 ZP K BOLT HH 3/8 NC X 1.25 LG GR 5 ZP L WASHER REG. LOCK 3/8 IN. NOM. I.D. ZP

70 68 HEADER HYDRAULICS & ELECTRICAL 13 FT SP (M150)

71 REF PART HEADER HYDRAULICS & ELECTRICAL 13 FT SP (M150) DESCRIPTION QTY 16FT 13FT 69 SERIAL MOTOR HYD SHAFT SEAL FLANGE SPLIT, 1 IN. (Includes items #3, #4, K, L) O-RING, SAE # FLANGE SPLIT HALF FITTING ELBOW 45 HYD cw O-RING, #12 JIC male x #12 ORB male HOSE 13 SP ROTARY CASE DRAIN COUPLING FEMALE HYD. 3/8 FLAT FACE BULKHEAD FITTING ADAPTER HYD CW O-RING, 1/4 NPTF x #12 ORB male O-RING, SAE #12-1 (For items #5, #8) VALVE RELIEF MOULDING LINE HIGH PRESSURE HOSE 13 FT PRESSURE FITTING ADAPTER HYD cw O-RING, #16 JIC male x #16 ORB male COUPLER FEMALE HYD. 3/4 IN. FLAT FACE, FASTER SEAL KIT (For 3/4 female coupler) COUPLER MALE HYD. 3/4 IN FLAT FACE 1 IN THD., FASTER SEAL KIT (For 3/4 male coupler) FITTING ELBOW 45 HYD cw O-RING, #16 JIC male x #16 ORB male FITTING ADAPTER HYD cw O-RING, #16 JIC fem. x #16 ORB male O-RING, SAE #16-1 (For items #13, #16, #17) NUT CAP, 1 IN. TUBE LINE RETURN STRAP VELCRO, HANGING, 8 IN SENDER SPEED BRACKET HARNESS WIRING, 13 FT SP ROTARY DISC HEADER NUT PANEL, DEUTSCH, HD30, SIZE WASHER LOCK SPRING, DEUTSCH, HD30, SIZE CAP WIRE HARNESS GROMMET 1.50 IN. I.D BRACKET WIRING PLUG SUPPORT SUPPORT WELDMENT A BOLT HH M14 X 2 X 35 LG ZP B BOLT HEX HD 1/4 NC X 0.75 LG GR 5 ZP C NUT HEX LOCK DT 1/4-20 UNC ZP D BOLT HH FLG (SERR FACE) 1/2 NC X 0.75 GR 5 ZP E BOLT RHSN 3/8 NC X 1.0 GR 5 ZP F NUT FLANGE DT SMOOTH FACE UNC G BOLT RHSN 1/2 NC X 1.0 GR 5 ZP H NUT FLANGE LOCK SM FACE DT UNC GR 5 J BOLT RHSSN 3/8 NC X 0.75 LG GR 5 ZP K BOLT HH 3/8 NC X 1.25 LG GR 5 ZP L WASHER REG. LOCK 3/8 IN. NOM. I.D. ZP

72 70 LIFT BOOTS RH BOOT SHOWN

73 LIFT BOOTS 71 REF PART DESCRIPTION QTY 16FT 13FT SERIAL MEMBER BOOT C/W BUSHINGS, RH MEMBER BOOT C/W BUSHINGS, LH (NOT ILLUSTRATED) BUSHING RUBBER PAD RUBBER PIN CLEVIS PIN HAIR A BOLT HH 5/8 NC X 1.75 LG GR 5 ZP B WASHER SAE FLAT 21/32 I.D. X 1-5/16 IN. O.D. ZP C NUT FLANGE DT SMOOTH FACE UNC

74 72 DECALS & REFLECTORS

75 DECALS & REFLECTORS 73 REF PART DESCRIPTION QTY SERIAL DECAL WARNING, HYDRAULIC PRESSURE, VERTICAL FORMAT DECAL CAUTION, TRANSPORTING DECAL WARNING, HOT OIL DECAL WARNING, TRANSPORT LOCK REFLECTOR AMBER REFLECTOR FLUORESCENT RED-ORANGE REFLECTOR RED DECAL WARNING, READ INSTRUCTION DECAL DANGER, ROTATING DRIVELINE DECAL DANGER, SHIELD MISSING DECAL DANGER, DRIVELINE GUARD MISSING DECAL 50 HR LUBE DECAL GENERAL CAUTION DECAL DANGER, HEADER LOCK DECAL 25 HR LUBE DECAL WARNING, DRIVE SHIELD DECAL DANGER, ROTATING DRIVELINE DECAL DANGER, ROTATING BLADES DECAL PATENT S DECAL SMV DECAL GAUGE DECAL GEAR LUBE DECAL WARNING, HYDRAULIC PRESSURE, HORIZONTAL FORMAT DECAL WHEEL BOLTS NOTE: For 2-panel (non-text) decals required for CE (European) units, refer to page 116. REF PART PAINT DESCRIPTION QTY. SERIAL PAINT BLACK, SPRAY CAN (55 65 GLOSS LEVEL) PAINT BLACK, 1 LITRE (55 65 GLOSS LEVEL) PAINT WHITE, SPRAY CAN PAINT WHITE, 1 LITRE PAINT RED, SPRAY CAN PAINT RED, 1 LITRE

76 74 PRODUCT IDENTIFICATION DECALS

77 PRODUCT IDENTIFICATION DECALS 75 REF PART DESCRIPTION QTY 16FT 13FT SERIAL DECAL "MACDON WITH COLOR BAR" (LH HITCH) DECAL "MACDON WITH COLOR BAR " (RH HITCH) DECAL LH END PANEL (R80) DECAL RH END PANEL (R80) DECAL MACDON DECAL MACDON, R80 TABLE DECAL APT

78 76 MECHANICAL HEADER ANGLE

79 MECHANICAL HEADER ANGLE 77 REF PART DESCRIPTION QTY 16FT 13FT SERIAL TOP LINK TUBE CENTER JOINT BALL, RH THD JOINT BALL, LH THD COLLAR LOCKING

80 78 HYDRAULIC HEADER ANGLE KIT

81 HYDRAULIC HEADER ANGLE KIT 79 REF PART DESCRIPTION QTY 16FT 13FT SERIAL B4892 KIT HEADER ANGLE (Kits available through Whole Goods only) CYLINDER HYDRAULIC SEAL KIT LINE HYDRAULIC (13 FT AND 16 FT) LINE HYDRAULIC (16 FT EXTENSION ONLY) FITTING ELBOW, BULKHEAD UNION HYD FITTING UNION HYD HOSE HOSE FITTING CONNECTOR HYD ARM LINK LINK INDICATOR, RH FITTING COUPLING HYD A NUT FLANGE DT SMOOTH FACE UNC B BOLT SHOULDER UNC C WASHER PLASTIC

82 80 DRAWBAR HITCH

83 DRAWBAR HITCH 81 REF PART DESCRIPTION QTY 16FT 13FT SERIAL B4886 KIT DRAWBAR HITCH (Kits available through Whole Goods only) ARM PT HITCH PLATE DRAWBAR HITCH ADAPTER WELDT CLAMP CASTING PIN ROCKSHAFT TUBE FLARED PIN WELDMENT BUSHING CHAIN 59 LINKS PIN CLEVIS PIN HAIR PIN CLEVIS PIN CLEVIS PIN COTTER 3/16 DIA X 1.25 ZP A WASHER SAE FLAT 13/16 I.D. X 1.5 IN. O.D. ZP B NUT HEX 3/4-10 UNC GR 5 ZP C BOLT HH 3/4 NC X 5.0 LG GR 8 ZP D BOLT HH 3/4 NC X 2.5 LG GR 5 ZP E WASHER FLAT RECTANGULAR F NUT HEX LOCK DT UNC G BOLT RHSN 3/8 NC X 1.5 LG GR 5 ZP H NUT FLANGE DT SMOOTH FACE UNC J WASHER SAE FLAT 1-1/16 I.D. X 2.0 IN. O.D. ZP K WASHER SAE FLAT 17/32 I.D. X 1-1/16 IN. O.D. ZP L WASHER HARDENED

84 82 TEMPORARY TRANSPORT HITCH

85 TEMPORARY TRANSPORT HITCH 83 REF PART DESCRIPTION QTY 16FT 13FT SERIAL B4897 KIT PT MOCO TRANSPORT HITCH (Kits available through Whole Goods only) HITCH TRANSPORT PIN CLEVIS PIN LYNCH CHAIN 59 LINKS A BOLT HH 3/4 NC X 2.5 LG GR 5 ZP B WASHER FLAT RECTANGULAR C NUT HEX LOCK DT UNC

86 84 3-POINT HITCH LINKAGE

87 3-POINT HITCH LINKAGE 85 REF PART DESCRIPTION QTY 16FT 13FT SERIAL B4887 KIT 3-POINT LINKAGE 1 1 (Kits available through Whole Goods only) YOKE WELDMENT ARM, RH See Note LINKAGE PIN BUSHING CAT II TO III PIN LYNCH CLEVIS CHAIN LINK PIN ROCKSHAFT TUBE FLARED ARM, LH See Note A BOLT HH 3/4 NC X 2.0 LG GR 5 ZP B WASHER REG. LOCK 7/8 IN. NOM. I.D. ZP C NUT HEX 7/8-14 UNF GR 5 ZP D BOLT HH 1/2 NC X 3.5 LG GR 5 ZP E NUT HEX LOCK DT UNC NOTE: If replacing arm or : earlier production used the same arm on both sides. This arm had one hole for location of pin (item #3). Newer design arms have two holes for location of pin. If replacing an arm with one pin location hole, order both arms (items #2 and #11).

88 86 OPTIONS

89 OPTIONS 87 REF PART DESCRIPTION QTY 16FT 13FT SERIAL B4902 KIT SHOE LIFT (See Note) CHANNEL CHANNEL A BOLT RHSN 3/8 NC X 1.0 GR 5 ZP B NUT FLANGE DT SMOOTH FACE UNC B4896 KIT GAUGE ROLLERS, 16 FT ONLY (See Note) ROLLER GAUGE WELDT BAR PLATE FLANGE CW LUBE FTG FLANGE BEARING SPH O.D. EXT INNER RACE 1-3/16 BORE PIN CLEVIS PIN LYNCH C BOLT RHSN 3/8 NC X 1.0 GR 5 ZP D NUT FLANGE DT SMOOTH FACE UNC E BOLT RHSN 1/2 NC X 1.25 GR 5 ZP F NUT FLANGE LOCK SM FACE DT UNC GR 5 B5509 KIT TALL CROP DIVIDERS (See Note) DIVIDER WELDMENT, LH DIVIDER WELDMENT, RH ROD WELDMENT, CROP DIVIDER G BOLT RHSN 1/2 NC X 1.0 GR 5 ZP H NUT FLANGE DT SMOOTH FACE 1/2 NC B4903 KIT FEED ASSISTING PLATES (See Note) PLATE K BOLT HH FLANGE M12 X 1.75 X 45 LG ZP B4906 KIT ADJUSTABLE SHOES, 16 FT ONLY (See Note) WELD'T SHOE BOTTOM SHOE, REPLACEABLE (Welding required)... AR PIN CLEVIS PIN LYNCH B5372 ROTARY HEADER ACCELERATORS (See Note) ACCELERATOR CW ACCELERATOR CCW L NUT FLANGE, STOVER LOCK, M12 M BOLT HH FLANGE M12 X 1.75 X 25 LG ZP N BOLT SHOULDER, BLADE PIVOT, M12 NOTE: Kits available through Whole Goods only.

90 88 OPTIONS (Continued) PULLTYPE DRIVE PRESSURE GAUGE

91 OPTIONS (Continued) 89 REF PART DESCRIPTION QTY 16FT 13FT SERIAL B4904 KIT PULLTYPE DRIVE PRESSURE GAUGE (See Note) SUPPORT GAUGE INDICATOR PRESSURE GAUGE FITTING ELBOW, 90 (#6 JIC male x #6 JIC swivel female) HOSE HYDRAULIC FASTENER CABLE TIE A SCREW CSK FLAT SOC HD, #10 NC X 3/4 GR 5 OR GR 8 ZP B NUT FLANGE (SERR FACE), #10 NC GR 5 ZP C BOLT RHSN 3/8-16 UNC, 1.5 IN. LG, ZP, GR 5 D NUT LOCK, SMOOTH FLANGE, 3/8 NC DT NOTE: Kits available through Whole Goods only.

92 90 OPTIONS (Continued)

93 OPTIONS (Continued) 91 REF PART DESCRIPTION QTY 16FT 13FT SERIAL B5647 KIT R80 GRASS SEED CRADLE CONVERSION, 2008 GRASS SEED TO 2009 HAY VERSION (See Note) SUPPORT 10 DISC CUTTERBAR WELDT SUPPORT CRADLE, RH SUPPORT CRADLE, LH SHOE WELDT, RH SHOE WELDT, LH A NUT HEX 3/4-10 UNC GR 5 ZP B NUT HEX LOCK DT UNC C BOLT RHSN 3/8 NC X 1.0 GR 5 ZP D BOLT HEX HD 3/8 NC X 1.0 LG GR 5 ZP E BOLT HEX HD 3/8 NC X 2.0 LG GR 5 ZP F BOLT RHSN 3/8 NC X 0.75 GR 5 ZP G BOLT HEX HD 1/2 NC X 1.25 LG GR 5 ZP H WASHER HARDENED J BOLT HH 5/8 NC X 1.75 LG GR 5 ZP K NUT FLANGE DT SMOOTH FACE UNC L BOLT HH 3/4 NC X 3.0 LG GR5 ZP M NUT FLG LOCK PREV TORQUE SM FACE M N NUT FLANGE DT SMOOTH FACE UNC P BOLT RHSSN 3/8 NC X 1.0 GR 5 ZP Q NUT FLANGE DT SMTH FACE UNC GR. G R NUT CENTER LOCK UNC GR 5 ZP S BOLT SKT HD 1/2 NC X 1.50 LG GR 5 T BOLT HH 3/4 NC X 2.5 LG GR 8 ZP NOTE: Kits available through Whole Goods only.

94 92 CONVERGING DRUMS GRASS SEED

95 CONVERGING DRUMS GRASS SEED 93 REF PART DESCRIPTION QTY 16FT 13FT SERIAL SUPPORT LOWER, LH SUPPORT LOWER, RH DRUM GRASS SEED ROTARY, 12 IN. CYL PLATE WELDT MOTOR HYD M AND S 2.44 CI SEAL KIT SPACER PLATE DRUM SUPPORT BEARING BALL SPH O.D. CW LC (1-3/8 IN. BORE) FLANGE FLANGE SUPPORT WELDT, LOWER PLATE RETAINER PLATE PIVOT PLATE PIVOT PLATE SHIELD RUBBER PLATE PIVOT GUARD LH GUARD RH A BOLT HH 3/4 NC X 2.5 LG GR 8 ZP B BOLT HH 3/4 NC X 3.0 LG GR 5 ZP C WASHER HARDENED D NUT HEX 3/4-10 UNC GR 5 ZP E BOLT HH 3/8 NC X 1.5 LG GR 5 ZP F NUT FLANGE DT SMOOTH FACE UNC G BOLT RHSN 1/2 NC X 1.25 GR 5 ZP H NUT FLANGE LOCK SM FACE DT UNC GR 5 J BOLT SHOULDER UNC K BOLT RHSN 3/8 NC X 1.25 LG GR 5 ZP L BOLT HH 1/2 NC X 1.0 LG GR 5 ZP M BOLT RHSN 3/8 NC X 1.0 GR 5 ZP N BOLT HH 1/2 NC X 1.5 LG TFL GR 5 ZP P BOLT RHSN 1/2 NC X 1 GR 5 ZP Q NUT FLG DT SMTH FACE UNC GR. G (Not Shown) NOTE: Refer to Section Cutterbar & Rolls Assembly, page 14, for location of nut Q (MD #135367).

96 94 DRUM DRIVE HYDRAULICS GRASS SEED

97 DRUM DRIVE HYDRAULICS GRASS SEED 95 REF PART DESCRIPTION QTY 16FT 13FT SERIAL CYLINDER HYDRAULIC SEAL KIT SPACER SPACER LINK WELDT SPACER FITTING COUPLING HYD, FEMALE HOSE HOSE FITTING ELBOW 90 HYD FITTING ELBOW 45 HYD CW O-RING FITTING CONNECTOR HYD HOSE FITTING CONNECTOR HYD FITTING TEE HYD STR THD RUN TEE CW O-RING HOSE CLAMP PVC INSULATED 13/16 IN. TUBE SIZE FITTING TEE HYD HOSE DRAIN FITTING COUPLING HYD FASTENER CABLE TIE (BLACK) HOSE FITTING TEE HYD STR THD RUN TEE CW O-RING FITTING ELBOW 90 HYD HOSE DRUM CYLINDER SLEEVE HOSE ANGLE SUPPORT HOSE FITTING ELBOW 90 HYD HOSE FITTING TEE HYD STR THD BRANCH TEE CW O-RING HOSE FITTING ADAPTER REDUCER 5/8 X 1/ A BOLT HH 3/4 NC X 4.5 LG GR 5 ZP B BOLT HH 3/4 NC X 4.0 LG GR 5 ZP C NUT HEX LOCK DT UNC D BOLT HH 1/2 NC X 1.25 LG GR 5 ZP E WASHER SAE FLAT 17/32 I.D. X 1-1/16 IN. O.D. ZP F NUT FLANGE LOCK SM FACE DT UNC GR 5 G NUT FLANGE DT SMOOTH FACE UNC H BOLT RHSN 3/8 NC X 1.0 GR 5 ZP J NUT TUBE 37 JIC 5/8 NOM. (7/8-14)

98 96 SUSPENDED DRIVES GRASS SEED

99 SUSPENDED DRIVES GRASS SEED 97 REF PART DESCRIPTION QTY 16FT 13FT SERIAL B5441 KIT GRASS SEED DRUM KIT (Includes four drums [item #5] and four caps [item #6]. Kits available through Whole Goods only.) KEY WOODRUFF (5/16 X 1 NOM.) SHAFT MACHINING HOUSING WELDT C/W BOLTS PULLEY STR BORE DRUM ROTARY CONVERGING PLATE CAP ANGLE SHAFT SPLINED BEARING RADIAL BALL 72MM O.D. X BORE HOUSING MACHINING SPACER KEY WOODRUFF (5/16 X 1-1/8 NOM.) RING RETAINING EXTERNAL (1.375 DIA. SHAFT) ANGLE PULLEY KIT (Incl. pulley , hub , and two of bolt L) PULLEY MODIFIED, 4-HOLE BUSHING SPLIT TAPER TYPE H C/W KEY & BOLTS (See Note) BUSHING SPLIT TAPER TYPE H C/W KEY & BOLTS (Modified) BELT V, MATCHED SET OF A BOLT HEX HD UNC X 1.50 B BOLT HH FLG (SERR FACE) 3/8 NC X 1.0 GR 5 ZP C NUT HEX 1/2-13 UNC GR 5 ZP D BOLT HH 1/2 NC X 1.25 LG GR 5 ZP E WASHER FLAT, PLATED F WASHER REG. LOCK 5/8 IN. NOM. I.D. ZP G NUT FLANGE LOCK SM FACE DT UNC GR 5 H BOLT RHSN 1/2 NC X 1.25 GR 5 ZP J BOLT HH 1/2 NC X 4.0 TFL GR 5 ZP K BOLT HH FLG (SERR FACE) 1/2 NC X 1.0 GR 5 ZP L BOLT HH 5/16 NC X 1.0 LG GR 5 ZP NOTE: For item #16, order bushing hub for units with serial number and below only if original pulley, item #15, remains in use. If new pulley is also required order pulley kit , which includes new design pulley and hub.

100 98 FORMING RODS GRASS SEED

101 FORMING RODS GRASS SEED 99 REF PART DESCRIPTION QTY 16FT 13FT SERIAL B4913 KIT WINDROW FORMING RODS, GRASS SEED HEADERS (Kits available through Whole Goods only) CLAMP TOP, LH CLAMP TOP, RH PLATE LH PLATE RH CLAMP BOTTOM, LH CLAMP BOTTOM, RH SHAFT FORMING ROD, ROTARY HEADER ROD WELDMENT LH ROD WELDMENT RH LUG WELDT FORMING ROD SUPT PIN HAIR BAR FORMING ROD LINK PIN COTTER 3/16 DIA X 1.25 ZP A SCREW HEX WASH HD THD ROLLING 3/8 NC X 3/4 B BOLT HH 1/2 NC X 9.0 LG GR5 ZP C WASHER SAE FLAT 17/32 I.D. X 1-1/16 IN. O.D. ZP D BOLT HH 1/2 NC X 10.0 LG GR5 ZP E NUT FLANGE LOCK SM FACE DT UNC GR 5 F BOLT SHOULDER UNC G WASHER FLAT

102 100 TALL CROP TRANSITION SHIELD GRASS SEED

103 TALL CROP TRANSITION SHIELD GRASS SEED 101 REF PART DESCRIPTION QTY 16FT 13FT SERIAL B4912 KIT TALL CROP TRANSITION SHIELD, GRASS SEED HEADERS (Kits available through Whole Goods only) BRACKET C/W DECALS LAMP AMBER HARNESS EXTENSION A BOLT RHSSN 1/2 NC X 1.0 GR 5 ZP B NUT FLANGE LOCK SM FACE DT UNC GR 5 C BOLT HH FLG (SERR FACE) 1/2 NC X 0.75 GR 5 ZP D BOLT RHSSN 3/8 NC X 0.75 LG GR 5 ZP E SCREW CSK MACH FLAT SOC HD 5/16 NC X 1 GR 5 ZP F NUT FLANGE DT SMOOTH FACE UNC H NUT FLG SIDE LK SMTH FACE 5/16 NC GR 5 ZP NOTE: Major kit components not listed above, such as shields and supports, are not serviced separately.

104 FT GRASS SEED HEADER TO HAY HEADER CONVERSION KIT

105 16 FT GRASS SEED HEADER TO HAY HEADER CONVERSION KIT 103 REF PART DESCRIPTION QTY 16FT 13FT SERIAL B5646 KIT 16 FT R80 GRASS SEED TO HAY CONVERSION (Kits available through Whole Goods only) NOTE: Refer to the following pages for kit service parts: Cutterbar and Rolls Assembly, page Header Drives, page Crop Lift Roll Drive Idler Assembly, page Header Rear Shields, page Decals and Reflectors, page

106 FT GRASS SEED HEADER TO HAY HEADER CONVERSION KIT (Continued)

107 16 FT GRASS SEED HEADER TO HAY HEADER CONVERSION KIT (Continued) 105 REF PART DESCRIPTION QTY 16FT 13FT SERIAL B5646 KIT 16 FT R80 GRASS SEED TO HAY CONVERSION (Kits available through Whole Goods only) GUARD RH GUARD LH SPACER SPRING EXTENSION INSERT SPRING BAR INSERT MACHINED BRACKET PIN SPRING 5/16 DIA. X 1.25 LG A BOLT RHSN 3/8 NC x 1 B BOLT RHSN 3/8 NC X 2.25 LG GR 5 ZP C NUT FLANGE DT SMOOTH FACE UNC D BOLT RHSN 1/2 NC X 1.25 GR 5 ZP E NUT FLANGE LOCK SM FACE DT UNC GR 5 F WASHER HARDENED G NUT HEX 5/8-11 UNC GR 5 ZP H BOLT HH (MIN THD) 5/8 NC X 7.5 LG GR 5 ZP NOTE: Service parts for cutterbar and rolls assembly only.

108 FT GRASS SEED HEADER TO HAY HEADER CONVERSION KIT (Continued)

109 16 FT GRASS SEED HEADER TO HAY HEADER CONVERSION KIT (Continued) 107 REF PART DESCRIPTION QTY 16FT 13FT SERIAL B5646 KIT 16 FT R80 GRASS SEED TO HAY CONVERSION (Kits available through Whole Goods only) GEARBOX BEARING SEAL SHIM GEAR HUB MACHINING SHAFT TAPERED KEY PULLEY MACHINING DRIVELINE UPPER 16 FT (Includes items #7 9) YOKE CLAMP CROSS JOURNAL YOKE FLANGE BUSHING SPLIT TAPER KEY WOODRUFF (3/8 X 1-1/4 NOM.) IDLER ARM ASSY (Includes item #13) BUSHING FLANGED 5/8 X 7/8 X 1L FITTING LUBRICATION SPRING ASSEMBLY (Includes item #16, #17) SPRING INSERT MACHINED PULLEY KEY WOODRUFF (5/16 X 1-3/8 NOM.) BELT CONDITIONER DRIVE PULLEY IDLER DRIVELINE, LOWER TELESCOPING 16 FT (Includes items #7, #8, and decal) A NUT HEX 5/8-11 UNC GR 5 ZP B WASHER SAE FLAT 17/32 I.D. X 1-1/16 IN. O.D. ZP C WASHER SAE FLAT 21/32 I.D. X 1-5/16 IN. O.D. ZP D WASHER REG. LOCK 1/2 IN. NOM. I.D. ZP E BOLT HH 1/2 NC X 1.5 LG TFL GR 5 ZP F BOLT HH 1/2 NC X 1.25 LG GR 5 ZP G BOLT HH 1/2 NC X 3.5 LG GR 5 ZP H BOLT HH 1/2 NC X 2.75 LG GR 5 ZP J BOLT HH 5/8 NC X 3.0 GR 5 ZP K BOLT HH 5/8 NC X 4.5 TFL GR 5 ZP L NUT FLANGE LOCK SM FACE DT UNC GR 5 M NUT FLANGE DT SMOOTH FACE UNC N BOLT HH FLANGE M12 X 1.75 X 25 LG ZP P BOLT HH 5/8 NC X 6.0 LG GR 5 ZP Q WASHER NOTE: Service parts for header drives only.

110 FT GRASS SEED HEADER TO HAY HEADER CONVERSION KIT (Continued)

111 16 FT GRASS SEED HEADER TO HAY HEADER CONVERSION KIT (Continued) 109 REF PART DESCRIPTION QTY 16FT 13FT SERIAL B5646 KIT 16 FT R80 GRASS SEED TO HAY CONVERSION (Kits available through Whole Goods only) ARM MACHINING PULLEY IDLER ASSY (Includes items #15 and #16) BEARING BALL CYL SPACER SPACER PULLEY STRAIGHT BORE KEY GUARD WELDMENT BUSHING SPLIT TAPER TYPE P1 C/W OUTER KEY AND BOLTS PULLEY KIT UPGRADE (Incl. pulley and items #7 9) PULLEY BELT V, MATCHED SET OF PLATE SPRING COMPRESSION PLATE ROLL TIMING GAGE BEARING BALL RING RETAINING A WASHER SAE FLAT 13/16 I.D. X 1.5 IN. O.D. ZP B WASHER REG. LOCK 5/8 IN. NOM. I.D. ZP C NUT HEX LOCK DT 5/8-11 UNC ZP D BOLT HH 5/8 NC X 3.0 LG GR 5 ZP E BOLT HEX HD UNC X 1.50 F BOLT SHOULDER UNC G WASHER FLAT, PLATED H BOLT HH FLG (SERR FACE) 3/8 NC X 0.75 GR 5 ZP J NUT FLANGE DT SMOOTH FACE UNC K NUT FLANGE DT SMOOTH FACE UNC L BOLT RHSN 3/8 NC X 1.25 GR 5 ZP M BOLT RHSN 1/2 NC X 1 GR 5 ZP N NUT FLANGE LOCK SM FACE DT UNC GR 5 NOTE: Service parts for crop lift roll drive idler assembly only.

112 FT GRASS SEED HEADER TO HAY HEADER CONVERSION KIT (Continued)

113 16 FT GRASS SEED HEADER TO HAY HEADER CONVERSION KIT (Continued) 111 REF PART DESCRIPTION QTY 16FT 13FT SERIAL B5646 KIT 16 FT R80 GRASS SEED TO HAY CONVERSION (Kits available through Whole Goods only) SHIELD SWATH BAFFLE WELDT HANDLE VINYL BRACKET SWATH BAFFLE DEFLECTOR LH DEFLECTOR RH PLATE FIN SWATH BAFFLE STRIP ANTI SLIP A BOLT RHSN 3/8 NC X 2.25 LG GR 5 ZP B BOLT RHSN 1/2 NC X 1.25 GR 5 ZP C BOLT HEX HD UNC X 0.75 LG D NUT FLANGE DT SMOOTH FACE UNC E WASHER SAE FLAT 17/32 I.D. X 1-1/16 IN. O.D. ZP F NUT FLANGE LOCK SM FACE DT UNC GR 5 G BOLT HH 1/2 NC X 1.0 LG GR 5 ZP H BOLT RHSN 3/8 NC X 1.25 LG GR 5 ZP J BOLT RHSSN 3/8 NC X 0.75 LG GR 5 ZP NOTE: Service parts for header rear shields only.

114 FT GRASS SEED HEADER TO HAY HEADER CONVERSION KIT (Continued)