FABCO-AIR H-Series Air Cylinders HUMPHREY INTERCHANGE
|
|
- Edwin Small
- 5 years ago
- Views:
Transcription
1 -16 12/16 O-I -Series ir ylinders UY ITG 1
2 air cylinders outstanding design and construction... superior performance and reliability arrel Stainless steel (Type 304). rawn and polished I.. provides ideal lube-holding, low friction surface. atte finish on O.. arrel attached to heads by abco rollforming process. 2. eturn Springs igh tensile strength music wire. Shotpeened to relieve stresses for longer life. 3. eads luminum. Internal face grooved for positive air flow to piston seals. 4. iston od Stainless Steel standard all s. Wrench s, standard on most s, and chamfered for easy wrench contact without damage. Threads are roll formed for strength and durability. 5. iston - Unique abco iston may be factory assembled in two different ways same overall dimensions with or without bumpers. iston threads are oll ormed for strength and durability. 6. Seals una standard on all s. luorocarbon (Viton Option ) available for high ambient temperatures, for etremely high cycling conditions with limited lubrication or mild chemical resistance (air supply contaminants and/ or lubricants). Seal design ensures constant contact with cylinder barrel eliminating seal collapse and blowby. 7. od ushing Oil permeated bronze. all-sized to close tolerance provides support and smooth, low friction movement for longer cylinder life. 8. ressure orts ull, unrestricted porting for maimum air flow combines with groove in heads to provide fast cylinder response and smooth movement. 9. Spacers Spacers ensure a uniform spring rate and prohibit collapse of springs, providing maimum life. 10. ccessories (see page 18 & 19) Steel mounting nuts, mounting brackets, clevises, etc., are burnished and bright zinc plated. 2
3 ir cylinders have an ecellent ability to provide fast response and rapid movement from the energy of compressed air. apid indeing, stamping, punching, part location, cylinder selection guide etc., are ideally suited to air cylinders. pplications requiring etremely slow and smooth, or precise movement are more difficult to satisfy due to the compressibility of air. onsult actory. mounting ount to centerline of work to avoid side load on. ount securely, without over-torquing mounting nuts. heck frequently for loose mountings. secure mount, accurately placed, promotes cylinder performance and endurance. Side load on should be eliminated. Severe side load or stress can cause breakage, ecessive bushing wear, and scoring of piston/ barrel. onsider Option (Wearstrip). educe adverse effect of side load by attaching a universal eye to the piston. lso, consider utilizing only part of total stroke...keep piston back in barrel for greater column strength. void bottoming-out piston on cylinder heads at high pressures. onsider Option (umper). lubrication ll s are factory prelubricated for optimum life and performance. eriodically lubricate internally with a non-detergent mineral-base oil. utomatic air line lubricators are most commonly used. To solve lubrication problems due to lubricant backflow during control valve ehaust cycle, install a abco quick ehaust valve directly to the cylinder port. This stops backflow and allows progressive flow of oil to cylinder. void using higher pressure than is actually required. ominal air pressure provides optimum cylinder life, reduces use and cost of compressed air, and saves energy. air cylinder application factors single acting types spring return spring etend double acting types double acting double-end Spring return (single acting): ir pressure puces force in one pushing direction only, causing to etend. Spring etend (single acting reverse): ir pressure puces force in one pulling direction only, causing to retract. Spring returns to normal position in one quick motion, determined by control valve s flow capacity and cylinder volume. low control (metering) of ehausting air during return stroke does not provide optimum smoothness of movement (consider ouble cting s for smoothest movement). Only one 3-way valve is required...less epensive than valving for double acting cylinders. onsider when compressed air supply is limited or must be conserved. ount to insure that vent in side of barrel can breathe freely. ir pressure puces force in either pushing or pulling direction. ushing force is greater than pulling force due to smaller effective piston area on side of piston. low control (metering) of ehausting air can be performed in either direction. ir ehausts from the cylinders port opposite the port being pressurized. or smoothest movement, meter the ehausting air. etering of the incoming pressure may puce erratic, jumpy cylinder action. losed system. o vent (breather hole) to consider; see Single cting above. onsider, when cylinder must operate in dirty ambient conditions. ir pressure puces equal force in both pushing and pulling directions due to equal piston area. ressurizing both sides locks cylinder position in any given point. ied mounting of both ends allows movement of barrel only... barrel moves back and forth and s are stationary. aution: o not side load (barrel weight, alignment, etc.). One can be used to perform a work function while second : - ermits operation of limit switches away from work function. - ermits attachment of guiding methods to eliminate rotation (alternate to he ) - rovides additional support to guard against deflection. 3
4 specifications air cylinders O () is determined by square inches of piston area (), and pressure () in SIG. = VOU (V) in cubic inches is determined by square inches of piston area (), and of stroke (). V=. S is affected by many variables (including force to move load, cylinder volume, control valve flow capacity, of supply lines, etc.) making precise calculations difficult. odel ode ore Size I.. ort Size 8 1/ U 7 3/4 1/8 I 6 1 1/16 1/8 I /4 1/8 I 5 1 1/2 1/8 I /4 1/4 I 4 2 1/4 I 3 2 1/2 1/4 I or ompressed ir to 200 SIG mbient Temperature: -40 to as standard mbient Temperature: -20 to 400 with luoroelastomer seals od iston rea (in 2 ) iameter ylinder Volume (in 3 /inch of stroke) Spring orce in ounds if yl. is: or (X) a b (less ) c (normal) c (actuated).187 (.187) (.250) (.375) (..) (.437) (..) (..) (..) / / / how to order code - type - stroke options eamples: 6-S /2 codes / bore sizes available recommended maimum stroke type 1/2 in. 3/4 in. 1 1/16 in. 1 1/4 in. 1 1/2 in. 1 3/4 in. 2 in. 2 1/2 in. in. comments double acting mount 12 Standard strokes are in 1 increments double acting pivot/double end mount 12 (1/2 for code 8). 2Y double acting double end 12 ractional strokes also available. double acting block front mount 12 onsult factory. Stroke tolerance is S single acting mount 6 1/32. S single acting pivot mount 6 onger than standard stroke s S single acting mount/x 6 are available. onsult factory. S single acting pivot mount/x 6 When specifying longer than standard single acting reverse/ mount S 4 stroke s, consider possible single acting reverse/pivot mount S 4 deflection, adequate lubrication, high S single acting block front mount 6 speed friction, etc. o warranty. S single acting reverse/block front mount 4 4
5 how to order options air cylinders type 2Y S S S S S S S S description double acting mount double acting pivot/double-end mount double acting double end double acting block front mount single acting mount single acting pivot mount single acting mount/x single acting pivot mount/x single acting reverse/ mount single acting reverse/pivot mount single acting block front mount single acting reverse/block front mount page options available T W U eample: 7--4 (3/4 ore/ouble acting cylinder with bumpers and wearstrip) option option decription SI OT - ocates rear port on side of body. vailable on type, S and S (See puct pages for details). U - educe mechanical noise - bsorb shock - egligible stroke change due to compression set - una standard. (Viton umpers standard when option is ordered with Option.) - Single cting odels - one bumper opposite spring side on piston - ouble cting odels - one bumper on both sides of piston - Standard on type 2Y. UOOSTO SS (VITO) - or ambient temperatures of -20 to 400. OTT OT 90 - ront head is rotated 90 clockwise from rear port, viewed from end. OTT OT ront head is rotated 180 clockwise from rear port, viewed from end. OTT OT ront head is rotated 270 clockwise from rear port, viewed from end. IT GT - or use with abco Sensor Switches (see page 22 & 23). WSTI - rotects pistons and barrel from wear due to minor deflection - Standard on type,, and with 5 inches or more of stroke. Standard on type S and S with 3 inches or more of stroke. ot available on odel 8. OY O SS - rovides ecellent sealing capabilities at low pressures. T OTT IVOT TG - otation of rear pivot tang 90. ort remains in original position. IVOT I I TG - pin pressed into rear tang. o bracket available. ot available in odels 3 and 4. W U O WI - rovides a wiping action to remove most foreign material from eposed while maintaining adequate lubricating film. rotects and primary seal. ot available on odel 8. IVOT USIG - ushing in rear pivot hole. ole diameter remains the same. vailable on S, S, S, of s 7, 6, 25, & 5. Standard on 3 and 4. ote: odel 5 cylinders have no threads on tang (tang diameter is 1.0 inch). 5
6 -type double acting / mount air cylinders Stainless steel, standard. Simple, reliable design. equires air pressure to etend and retract. tend force eceeds retract force (smaller effective area on side of piston). clusive abco reversible piston. Specify option (internal magnet) to operate sensors. Wearstrip standard: 5 inches or more of stroke (optional on shorter strokes. / on 8). Options:,,,,, and W. ounting nut included, ecept 4 & 3 (order separately). vailable accessories foot mount and clevis. See pages 18 & 19. or puct configuration utility, 3 viewer, and 3 odel downloads, Visit G option cylinder with option standard cylinder + Stroke ounting nut where applicable. or dimensions see page 19. X e...ompressed ir ressure ange SIG Temperature ange to 160 mbient* w/luoroelastomer to 400 mbient* ecommended maimum stroke...12 *additional heat may be generated by seal friction (high speed cycling). code. piston area* - in 2 volume - in 3 (per inch of stroke) plain side side *rea SIG = pproimate orce & type (stroke) bore retracted wrench G thread thread port (S) 8--_ 1/ none / * U 7--_ add to dim. 3/ none / /8-18 1/ X _ 25--_ 5--_ 75--_ 1 1/ / /8-18 1/ / / /4-16 1/ / / /4-16 1/ / / / _ / /4-12 1/ _ 2 1/ / /8-12 1/ * 8 only - add for Option.
7 air cylinders -type double acting / pivot mount or double-end mount Stainless steel, standard. Simple, reliable design. equires air pressure to etend and retract. tend force eceeds retract force (smaller effective area on side of piston). clusive abco reversible piston. Specify option (internal magnet) to operate sensors. Wearstrip standard: 5 inches or more of stroke (optional on shorter strokes. / on 8). Options:,,,,,,,,, T, W and U. Versatile mounting, pivot,, double-end. vailable accessories, pivot bracket, mounting nut, foot mount and clevis, see pages 18 & 19. or puct configuration utility, 3 viewer, and 3 odel downloads, Visit V Z U T + Stroke + Stroke TY TY TY X TY e...ompressed ir ressure ange SIG Temperature ange to 160 mbient* w/luoroelastomer to 400 mbient* ecommended maimum stroke...12 *additional heat may be generated by seal friction (high speed cycling). piston area* - in 2 volume - in 3 (per inch of stroke) code. plain side side *rea SIG = pproimate orce & type (stroke) bore eten. wrench thread & port pivot (S) thread T U V X il. ia Z ole ia. 8--_ 1/ none / * 3.06* U 7--_ 6--_ 25--_ 5--_ 75--_ 3/ none 1/ /8-18 1/ / / /8-18 1/ / / /4-16 1/ / / /4-16 1/ / / / _ / /4-12 1/ _ 2 1/ / /8-12 1/ * 8 only - add for Option. 7
8 air cylinders 2Y-type double acting - double end / double end mount ir pressure puces equal force in both directions due to equal piston area; permits locking in mid stroke. One can be used to perform work function, second to operate limit switches, provide support or guide. ied mounting of both ends allows movement of barrel only. umpers and Stainless steel, standard. Options:,,,,,,W. Two mounting nuts included, ecept odel 3 & 4 (order separately). vailable accessories foot mount, mounting nut and clevis, see pages 18 & 19. or puct configuration utility, 3 viewer, and 3 odel downloads, Visit + (2 stroke ) + Stroke ounting nut where applicable. or dimensions see page 19. X e...ompressed ir ressure ange SIG Temperature ange to 160 mbient* w/luoroelastomer to 400 mbient* ecommended maimum stroke...12 *additional heat may be generated by seal friction (high speed cycling). piston area* - in 2 volume - in 3 code. (per inch of stroke) *rea SIG = pproimate orce & type (stroke) bore retracted wrench thread thread port (S) 8-2Y-_ 1/ none / U 7-2Y-_ 3/ none 1/ /8-18 1/ X Y-_ 25-2Y-_ 5-2Y-_ 75-2Y-_ 1 1/ / /8-18 1/ / / /4-16 1/ / / /4-16 1/ / / / Y-_ / /4-12 1/ Y-_ 2 1/ / /8-12 1/
9 -type air cylinders Versatile mounting... through-head, front mount using. Stainless steel, standard. Simple, reliable design. equires air pressure to etend and retract. tend force eceeds retract force (smaller effective area on side of piston). clusive abco reversible piston. Specify option (internal magnet) to operate sensors. Wearstrip standard (double acting only): 5 inches or more of stroke (optional, shorter strokes). Options:,,,,. vailable accessories, clevis, see pages 18 & 19. or puct configuration utility, 3 viewer, and 3 odel downloads, Visit + Stroke e...ompressed ir ressure ange SIG Temperature ange to 160 mbient* w/luoroelastomer to 400 mbient* ecommended maimum stroke...12 *additional heat may be generated by seal friction (high speed cycling). code. piston area* - in 2 volume - in 3 (per inch of stroke) plain side side *rea SIG = pproimate orce Tapped ounting hole (Z) position for 8- only & type (stroke) bore Square. Wrench eten. G thread mounting holes Two #8-32 holes on 8--_ 1/ none _ 6--_ 5--_.75 diameter bolt circle port (S) U T X Y Z mounting holes Two #8-32 holes 3/ / Two #10-32 holes on 1.0 diameter bolt circle Two #10-32 holes 1/ / / on 1.25 diameter bolt circle 1/ Two #1/4-20 holes 1 1/ / on 1.75 diameter 1/ bolt circle Two holes drill and c bored for cap screw tap 1/4-20 Two holes drill and c bored for cap screw tap 1/4-20 Two holes drill and c bored for 1/4-20 cap screw tap 5/
10 S-type single acting / mount air cylinders Stainless steel, standard. conomical - requires air pressure only to etend. Stress relieved spring/s retract. Options:, and. ounting nut included, ecept 4 (order separately). vailable accessories: foot mount and clevis, see pages 18 & 19. or puct configuration utility, 3 viewer, and 3 odel downloads, Visit G option cylinder with option standard cylinder + ounting nut where applicable. or dimensions see page 19. X e...ompressed ir ressure ange SIG Temperature ange to 160 mbient* w/luoroelastomer to 400 mbient* ecommended maimum stroke...6 *additional heat may be generated by seal friction (high speed cycling). piston area* - in 2 spring force pounds volume - in 3 code. (per inch of stroke) free comp *rea SIG = pproimate orce & type (stroke) bore add to dim. eten. wrench G thread thread port (S) for each stroke increment of: add to X S-_ 1/ none / / U S-_ 3/ none / /2-20 1/ S-_ 1 1/ / /8-18 1/ S-_ 1 1/ / /4-16 1/ S-_ 1 1/ / /4-16 1/ S-_ 1 3/ / / S-_ / /4-12 1/
11 air cylinders S-type single acting / pivot mount or double-end mount Stainless steel, standard. conomical - requires air pressure only to etend. Stress relieved spring/s retract. Options:,,, T and U. Versatile mounting, pivot,, double-end. vailable accessories, pivot bracket, foot mount, mounting nut and clevis, see pages 18 &19. or puct configuration utility, 3 viewer, and 3 odel downloads, Visit V Z U T + + X TY e...ompressed ir ressure ange SIG Temperature ange to 160 mbient* w/luoroelastomer to 400 mbient* ecommended maimum stroke...6 *additional heat may be generated by seal friction (high speed cycling). piston area* - in 2 spring force pounds volume - in 3 code. (per inch of stroke) free comp *rea SIG = pproimate orce & type (stroke) bore eten. wrench thread thread port (S) for each stroke increment of: add to T U V X il. ia front (rear) Z ole ia. 8-S-_ 1/ none /8-24 (7/16-20) U / (.437).16 7-S-_ 3/ none 1/ /2-20 (5/8-18) 1/ (.625) 6-S-_ 1 1/ / /8-18 TY. 1/ S-_ 1 1/ / /4-16 TY. 1/ S-_ 1 1/ / /4-16 TY. 1/ S-_ 1 3/ / TY. 1/ S-_ / /4-12 TY. 1/
12 air cylinders S-type single acting, non-rotating / mount Stainless steel, standard. on-rotating he -no special guides required. equires air pressure only to etend. Stress relieved springs retract. Options:, and. ounting nut included. vailable accessories: foot mount and clevis, see pages 18 & 19. or puct configuration utility, 3 viewer, and 3 odel downloads, Visit + G e...ompressed ir ressure ange SIG Temperature ange to 160 mbient* w/luoroelastomer to 400 mbient* ecommended maimum stroke...6 *additional heat may be generated by seal friction (high speed cycling). X code. piston area* - in 2 volume - in 3 (per inch of stroke) free comp *rea SIG = pproimate orce spring force pounds 2 option cylinder with option ounting nut where applicable. or dimensions see page 19. standard cylinder & type (stroke) bore add to dim. eten. G thread thread port (S) for each stroke increment of: add to e lats. X S-_ 1/ / / U 7-S-_ 3/ / /2-20 1/ S-_ 1 1/ / /8-18 1/ S-_ 1 1/ / /4-16 1/
13 air cylinders S-type single acting, non-rotating / pivot mount or double-end mount Stainless steel, standard. on-rotating he -no special guides required. equires air pressure only to etend. Stress relieved springs retract. Options:,,, T and U. Versatile mounting, pivot,, double end. vailable accessories: pivot bracket, foot mount, mounting nut and clevis, see pages 18 & 19. or puct configuration utility, 3 viewer, and 3 odel downloads, Visit e...ompressed ir ressure ange SIG Temperature ange to 160 mbient* w/luoroelastomer to 400 mbient* ecommended maimum stroke...6 *additional heat may be generated by seal friction (high speed cycling). V T + + code. piston area* - in 2 volume - in 3 (per inch of stroke) free spring force pounds comp X TY *rea SIG = pproimate orce Z U & type (stroke) bore eten. thread thread port (S) for each stroke increment of: add to X TS T U V X S-_ 1/ / / U (.437) 7-S-_ 3/ / /2-20 (5/8-18) 1/8 Z ole ia (.625) 6-S-_ 1 1/ / /8-18 1/ S-_ 1 1/ / /4-16 1/
14 air cylinders S-type single acting reverse / mount Stainless steel, standard. equires air pressure to retract. Stress relieved springs etend. Options:,, and W. Wearstrip standard: 3 inches or more of stroke (optional, shorter strokes). ounting nut included, ecept 4 (order separately). vailable accessories: foot mount and clevis, see pages 18 & 19. or puct configuration utility, 3 viewer, and 3 odel downloads, Visit + e...ompressed ir ressure ange SIG Temperature ange to 160 mbient* w/luoroelastomer to 400 mbient* ecommended maimum stroke...4 *additional heat may be generated by seal friction (high speed cycling). G US STO X code. piston area* - in 2 volume - in 3 (per inch of stroke) free spring force pounds comp ounting nut where applicable. or dimensions see page 19. *rea SIG = pproimate orce & type (stroke) bore retracted wrench G thread thread port (S) (with etended) for each stroke increment of: S-_ 1/ none / / U add to X S-_ 3/ none / /8-18 1/ S-_ 1 1/ / /8-18 1/ S-_ 1 1/ / /4-16 1/ S-_ 1 1/ / /4-16 1/ S-_ 1 3/ / / S-_ / /4-12 1/
15 air cylinders S-type single acting reverse / pivot mount or double end mount Stainless steel, standard. equires air pressure to retract. Stress relieved springs etend. Options:,, and W. Wearstrip standard: 3 inches or more of stroke (optional, shorter strokes). Options:,,,, T, W and U. Versatile mounting, pivot,, double-end. vailable accessories: pivot bracket, foot mount, mounting nut and clevis, see pages 18 & 19. or puct configuration utility, 3 viewer, and 3 odel downloads, Visit V T + + US STO X TY e...ompressed ir ressure ange SIG Temperature ange to 160 mbient* w/luoroelastomer to 400 mbient* ecommended maimum stroke...4 *additional heat may be generated by seal friction (high speed cycling). code. piston area* - in 2 volume - in 3 (per inch of stroke) free spring force pounds comp Z U TY TY TY *rea SIG = pproimate orce & type (stroke) bore eten. wrench thread thread port (S) (w/ et.) (w/ et.) for each stroke increment of: add to T U V X il. ia Z ole ia U 8-S-_ 1/ none / / S-_ 3/ none 1/ /8-18 1/ S-_ 1 1/ / /8-18 1/ S-_ 1 1/ / /4-16 1/ S-_ 1 1/ / /4-16 1/ S-_ 1 3/ / / S-_ / /4-12 1/
16 S-type air cylinders Versatile mounting... through-head, front mount using. Stainless steel, standard. Wearstrip standard 3 inches or more of stroke (optional on shorter strokes. / on 8). S Options: and. vailable accessories: clevis, see pages 18 & 19. or puct configuration utility, 3 viewer, and 3 odel downloads, Visit o + e...ompressed ir ressure ange SIG Temperature ange to 160 mbient* w/luoroelastomer to 400 mbient* ecommended maimum stroke...6 *additional heat may be generated by seal friction (high speed cycling). piston area* - in 2 spring force pounds volume - in 3 code. (per inch of stroke) free comp 8-S S S S *rea SIG = pproimate orce Tapped ounting hole (Z) position for 8-S only & type (stroke) bore square eten. Wrench G 8-S-_ 1/ none thread mounting holes Two #8-32 holes on.75 dia bolt circle port (S) for each stroke increment of: 7-S-_ 3/ / Two #10-32 holes on 1.0 dia bolt circle 1/ S-_ 1 Two # / /16 holes on 1.25 dia bolt circle Two #1/4-20 1/ S-_ 1 1/ / holes on 1.75 dia bolt circle 1/ U add to T X Y Z mounting holes / Two #8-32 holes Two holes drill and c bored for cap screw tap 1/4-20 Two holes drill and c bored for cap screw tap 1/4-20 Two holes drill and c bored for 1/4-20 cap screw tap 5/
17 S-type air cylinders Versatile mounting... through-head, front mount using. Stainless steel, standard. Wearstrip standard 3 inches or more of stroke (optional on shorter strokes. / on 8). S Options:, and. vailable accessories: clevis, see pages 18 & 19. or puct configuration utility, 3 viewer, and 3 odel downloads, Visit e...ompressed ir ressure ange SIG Temperature ange to 160 mbient* w/luoroelastomer to 400 mbient* ecommended maimum stroke...4 *additional heat may be generated by seal friction (high speed cycling). o + lus stroke piston area* - in 2 spring force pounds volume - in 3 code. (per inch of stroke) free comp 8-S S S 5-S *rea SIG = pproimate orce Tapped ounting hole (Z) position for 8-S only & type (stroke) bore square eten. Wrench G 8-S-_ 1/ none thread mounting holes Two #8-32 holes on.75 dia bolt circle port (S) for each stroke increment of: add to T X Y Z mounting holes / Two #8-32 holes 7-S-_ 3/ / Two #10-32 holes on 1.0 dia bolt circle 1/ S-_ 1 Two # / holes on 1.25 dia 1/16 bolt circle Two #1/4-20 1/ S-_ 1 1/ / holes on 1.75 dia bolt circle 1/ U Two holes drill and c bored for cap screw tap 1/4-20 Two holes drill and c bored for cap screw tap 1/4-20 Two holes drill and c bored for 1/4-20 cap screw tap 5/
18 air cylinder accessories are made of carbon steel burnished for surface smoothness bright zinc plated for corrosion resistance accessories odel umber ylinder ore Sizes ( code) G pivot bracket for use with pivot cylinders cylinders can pivot through 120 one-piece construction for strength and ease of cylinder installation/removal pivot pin and cotter pin supplied. G -8-1/2 (8) /4 (7) & 1 1/16 (6) 1 1/4 (25) 1 1/2 (5) & 1 3/4 (75) (4) & 2 1/2 (3) odel umber ylinder ore Sizes ( code) G clevis for use on all cylinders smooth beveled ends locknut, clevis pin and cotter pin supplied. T-8 T-7 T-11 1/2 (8) 3/4 (7) 1 1/16 (6) /4-28 5/ S T /4 (25) & 1 1/2 (5) / G T /4(75),2(4), 2 1/2(3) / odel umber ylinder ore Sizes ( code) G foot mount -8-S 1/2(8) single acting types for mounting and double - end mounting gusseted for added strength G /2(8) double acting types 3/4(7) single acting types 3/4(7) double acting 1 1/16(6) single & double acting types 1 1/4(25) & 1 1/2(5) ll Types 1 3/4(75) ll Types (4) ll Types 2 1/2 (3) ll Types *odel 8-S requires one each -8-S and -8 for double end mount. **odels 7-S and 7-S require one each -7 and -11 for double end mount. 18
19 mounting nut / jam nut mounting nut for or pivot tang threads jam nut for locking clevis mounting nut # where to use cylinder bore & type jam nut # where to use cylinder bore size -8-S 1/2(8) single acting /2(8) / /2(8) double acting /4(7) / / /4(7) single acting /16(6) /2-20 5/ /4(7) double acting 1 1/16(6) all types /4(25) /8-18 7/16-20 & 1 1/2(5) /4(25) all types / /2(5) all types /4(75) & 2(4) /2-20 & 2 1/2(3) 1 3/4(75) all types (4) all types 2 1/2(3) ll Types / /
20 volume chambers,, types standard / end mount / double end mount type: standard inline mount type: end mount type: double end mount or vacuum or air Ideal for time delay circuits Stainless steel barrel luminum end caps Options: and side porting. See page 18 and 19 for foot mount and mounting nuts. (, s) bore code bore in. basic volume* volume in 3 add per 1.0 inch 8 1/ / / / / / / *add this volume to sum of the per inch volume. This basic volume eists before any 1-inch increments are added. how to order bore code 7 6 see left option eample: /2 specify in inches Standard with side port option odel with side port option odel with side port option 20
21 volume chambers dimensions bore code dimensions (S) U / / / / / / / G or side porting, (option ) add dimension & G to desired. (double the G dimension for option, side porting both ends.) or end mount add dimension & to desired. (ouble the dimensions for end mount both ends.) (US GT) TY side port TY G (TY 2 S) aial port end mount 21
22 with position sensing air cylinders abco double acting air cylinders, type,, and may be ordered with Option, an internal magnet factory installed on the reversible piston, permitting use with position sensing switches. ylinder s with Option are interchangeable in with other abco air cylinders, facilitating conversions of eisting applications. sensor switches basic on/off reed on/off reed switch switch w/ lead : 24 inches standard lead : 144 inches = Option non-contact solid state switch + + O + + O VOTS VOTS or S ounting it: ounts sensor to abco ylinder. ssembly instructions are included with shipment TO T O WI S4 / S4- ontacts: SST orm (normally open) ontact ating: 50W a. Voltage ating: 200 V a. 141 V a. Switching current: 1 a. Initial ontact esistance:1 Ohm a. inimum reakdown Voltage: 225 V 275 V Temperature ange: -40 to 200 (-40 to 93 ) OTT TIG OW UV urve quation UT 50W >/= Voltage current how to order S4 odel S2 S4 G1 O OTIO U S2 / S2- O OTIO ead ength 24 in: in: U O S ount w/o t: - w/t: S VOTS VOTS SSO OW UV urve quation 300mW </= Voltage current G1 G1 / G1- G1- () O U UT m OS O O SSO O U O G1 / G1- () OS O O = V/I Ohms ( > 5 Watts ) V = Switch Voltage ( Volts ) I = Switch urrent onsumption 60% safety factor ( amps ) Giant agnetoesistance (G) ffect Input Voltage : 5 to 30 V Input urrent : 25 m a. Output Voltage rop :.4V a. Output urrent : 330 m a. everse Input Voltage rotection ower issipation : 300 mw a. Temperature ange : -20 to 185 (-29 to 85 ) rices effective an 2, 2017 Switches rice S-2 eed $23.63 S-2 eed w/144 ead $32.53 S-2-S eed w/ounting $29.76 S-2-S eed w/144 leads & tg $38.65 S-4 eed - $33.36 S-4 eed - w/144 eads $43.68 S-4-S eed - w/tg $39.49 S-4-S eed - w/144 eads & tg $49.81 G-1 Solid State $37.70 G-1 Solid State w/144 eads $48.14 G-1-S Solid State w/ounting $43.83 G-1-S Solid State w/144 leads &tg $54.27 S Sensor Switch ounting it $
23 ylinder ccessories agnetic osition Sensors Temperature range: 4 to +176 ( 20 to +80) rices effective an 2, 2017 agnetically operated reed switches and electronic sensors can be mounted anywhere along the and circumferance of the cylinder. magnetic piston is required. ovetail Style Sensors rewired 9 ft. eadwire uick isconnect* Sensor Type lectrical haracteristics art o. rice art o. rice eed (o ) eed () lectronic () lectronic () V/V, 0.5 mp a current, 5 Watt a, 0 Voltage rop V/V, 0.03 mp a current, 4 Watt a, 2.0 Voltage rop Sourcing 5-28 V, 0.20 mp a current, 1.0 Voltage rop Sinking 5-28 V, 0.20 mp a current, 1.0 Voltage rop $ $ *ote: uick disconnect styles are supplied with 6 inch pigtail with male connector. Order female cordsets separately from chart below. ncased in a plastic housing, dovetail style sensors are corrosion resistant. 60 wire outlet allows close mounting. Two methods of mounting are available: one is fastened to the cylinder barrel with a band clamp (not included with sensor must be ordered separately); the second is an adhesive-backed mounting rail with twin dovetail slots. -Series cylinder with rail mounted dovetail sensors shown on one of abco-ir's linear slide pucts. Sensor slides into etruded aluminum rail and is locked in place with a screw. Sensor Type eed () lectronic () lectronic () and lamp dapter for ovetail Sensors (ust be ordered separately) art o rice: $8.55 lamp on Style Sensors lectrical haracteristics ounting Options ovetail ail as shown above (must be ordered separately). Order by art o. where the is known, or by cylinder no. ample: odel no. of cylinder allows factory to determine the needed. (stimated for pricing purposes is stroke + 1") rice: $ $1.10 per inch Supplied with double sided tape affied. pplication recommendations: a) lean cylinder body O.. with acetone. emove all oil from surface V/V, 0.5 a, 10 Watt a, SST.O. 3.5 voltage drop Sourcing,, 6-24 V, 0.5 mp a, 1.0 voltage drop Sinking,, 6-24 V, 0.5 mp a, 1.0 voltage drop rewired 9 ft. eadwire art o. rice $ b) o not apply the rail over the crimped body edge. c) ouble check positioning of the rail. d) igh performance double sided tape offers convenient peel and stick but is very aggressive, giving you only one chance. e careful! e) emove protective film from tape and place rail in desired position. f) irmly press the rail to cylinder body. lternatively, the etruded aluminum rail can be fastened using octite U-05 urethane adhesive or similar. ollow puct manufacturer's recommendations for application. uick isconnect* art o. rice $ and lamp for lamp On Sensors (must be ordered separately) art o rice: $8.10 emale ordsets for uick isconnect Sensors ordset ength art o. rice 1 eter -1 $ eters eters rewired style sensors are supplied with a 9 foot leadwire. *uick disconnect style sensors are supplied with male connector as shown in this photo. Order female cordsets separately from the chart below. Sensor igtail 34 (1.34) 8.5 (.33) 1, 2 or 5 eter able 32 (1.26) 9.8 (.39) 23
24 delue ends clusive with abco ir ylinders (ecept S, S, and 2Y s), you may choose from 15 unique, custom -end design selections, and have abco tailor it to your eact requirements. nd Workbook. pect normal lead times and no minimum order quantities. unique number is assigned at the initial build cycle. That part number is permanently available for future orders of the same make. The 15 themes are shown below, and address customizable features such as etension, wrench position, male or female thread and thread, plain end, rounded end, ring grooves, diameter reductions, and (cotter) pin holes. amples of part numbers utilizing codes below are: 7-S-2 X and 5-S-1 X ach of the 15 different end selections includes a specific set of user definable dimensions selected from the elue od X01 X02 X03 X04 X05 X06 X07 X08 X09 X10 X11 X12 X13 X14 X15 eample: 6--1 X X specs: =1.5 =10-32 U =
25 25 odel ase Stroke per 1/2 umper agnet (Viton) od Wiper W Wearstrip tang in T ush U 90 Side ort 2Y S S S S olyk S S S S $18.06 $22.27 $29.60 $17.45 $23.05 $31.85 $28.48 $10.67 $26.95 $27.85 $22.05 $41.65 $14.78 $33.50 $19.24 $0.94 $0.94 $1.19 $1.70 $1.70 $1.70 $1.70 $1.70 $1.70 $1.70 $1.70 $0.94 $0.72 $0.72 $0.72 $4.14 $4.14 $4.14 ST $5.40 $5.40 $5.40 $15.05 $4.07 $5.45 $5.45 $5.45 $2.10 $2.10 $2.10 $2.10 $9.78 $9.78 $9.78 $12.54 $5.30 $5.30 $5.30 $5.30 $9.20 $9.20 $5.30 $9.20 $2.54 $ S oot ount rice -8 oot ount $ S am ut $ am ut $ racket $3.30 T-8 ccessories od levis $1.97 $3.17 odel 8 (1/2 ore) odel ase Stroke per 1 umper agnet (Viton) od Wiper W Wear strip tang in T ush U 90 Side ort 2Y S S S S olyk S S S S $18.30 $22.63 $32.74 $19.45 $24.25 $34.35 $28.48 $11.15 $28.40 $29.50 $23.65 $43.30 $16.11 $34.80 $20.74 $1.76 $1.76 $2.33 $3.25 $3.25 $3.25 $3.25 $3.25 $3.25 $3.25 $3.25 $1.76 $0.90 $0.90 $0.90 $4.14 $4.14 $4.14 ST $5.71 $5.71 $5.71 $7.63 $2.00 $2.00 $2.00 $2.00 $9.78 $9.78 $9.78 $12.54 $5.30 $5.30 $5.30 $5.30 $9.20 $9.20 $5.30 $9.20 $2.90 $2.90 $2.90 $2.90 $2.90 $2.90 $2.90 $2.90 $2.90 $2.90 $2.90 $2.90 $6.61 $6.61 $2.53 $2.53 $ oot ount rice -11 oot ount $ am ut $ am ut $ racket $3.23 T-7 ccessories od levis $1.97 $3.30 odel 7 (3/4 ore) rices effective an 2, 2017 = OT I
26 26 odel ase Stroke per 1 umper agnet (Viton) od Wiper W Wear strip tang in T ush U 90 Side ort 2Y S S S S olyk S S S S $21.82 $26.09 $38.78 $21.65 $26.90 $42.05 $34.43 $11.81 $31.35 $37.10 $25.90 $50.90 $16.04 $37.10 $20.62 $1.76 $1.76 $2.44 $4.10 $4.10 $4.10 $4.10 $4.10 $4.10 $4.10 $4.10 $1.76 $1.21 $1.21 $1.21 $4.14 $4.14 $4.14 ST $6.07 $6.07 $6.07 $15.05 $10.05 $10.05 $10.05 $4.07 $4.07 $4.07 $4.07 $2.00 $2.00 $2.00 $2.00 $10.86 $10.86 $10.86 $11.86 $11.86 $11.86 $14.94 $6.35 $6.35 $6.35 $6.35 $10.80 $10.80 $6.35 $10.80 $8.22 $8.22 $9.60 $9.60 $9.60 $2.53 $2.53 $2.53 $ oot ount rice $ am ut $ racket T-11 ccessories od levis $2.25 $3.29 odel 6 (1-1/16 ore) -15 oot ount rice $ am ut $ racket T-15 ccessories od levis $3.30 $5.47 odel ase Stroke per 1 umper agnet (Viton) od Wiper W Wearstrip tang in T ush U 90 Side ort 2Y S S olyk S S $31.92 $38.20 $53.11 $33.95 $41.80 $13.33 $44.30 $19.42 $48.65 $25.52 $2.25 $2.25 $3.45 $5.10 $5.10 $5.10 $5.10 $1.43 $1.43 $1.43 $4.14 $4.14 ST $6.07 $6.07 $5.40 $5.40 $5.40 $4.56 $4.56 $4.56 $6.68 $6.68 $11.86 $11.86 $14.94 $6.35 $6.35 $10.80 $10.80 $9.21 $9.21 $9.21 $9.21 $2.53 $2.53 $2.53 $6.68 odel 25 (1-1/4 ore) rices effective an 2, 2017 = OT I
27 27 odel ase Stroke per 1 umper agnet (Viton) od Wiper W Wear strip tang in T ush U 90 Side ort 2Y S S S S olyk S S S S $37.07 $42.34 $58.64 $40.60 $47.05 $64.60 $54.19 $15.98 $50.40 $52.15 $45.15 $72.20 $21.06 $57.40 $26.12 $2.63 $2.63 $4.27 $5.85 $5.85 $5.85 $5.85 $5.85 $5.85 $5.85 $5.85 $2.63 $1.75 $1.75 $1.75 $4.52 $4.52 $4.52 ST $6.77 $6.77 $6.77 $7.52 $7.52 $7.52 $7.52 $7.52 $7.52 $5.45 $5.45 $5.45 $5.45 $2.77 $2.77 $2.77 $2.77 $8.80 $8.80 $8.80 $13.05 $13.05 $13.05 $16.50 $7.45 $7.45 $7.45 $7.45 $11.75 $11.75 $7.45 $11.75 $9.21 $9.21 $9.21 $9.21 $9.21 $2.53 $2.53 $2.53 $ oot ount rice $ am ut $ racket T-15 ccessories od levis $3.30 $5.47 odel 5 (1-1/2 ore) -75 oot ount rice $ am ut $ racket T-19 ccessories od levis $5.12 $5.46 odel ase Stroke per 1 umper agnet (Viton) od Wiper W Wear strip tang in T ush U 90 Side ort 2Y S S olyk S S $54.19 $61.02 $78.15 $59.35 $68.70 $18.63 $71.95 $25.52 $73.55 $32.32 $2.94 $2.94 $5.56 $7.95 $7.95 $7.95 $7.95 $2.05 $2.05 $2.05 $4.52 $4.52 ST $6.77 $6.77 $4.08 $4.08 $4.08 $2.77 $2.77 $2.77 $8.80 $8.80 $13.05 $13.05 $16.50 $7.45 $7.45 $11.75 $11.75 $10.54 $10.54 $10.54 $10.54 $2.53 $2.53 $2.53 $8.80 odel 75 (1-3/4 ore) rices effective an 2, 2017 = OT I
28 28-19 oot ount rice $ am ut $ racket T-19 ccessories od levis $7.63 $5.46 odel ase Stroke per 1 umper agnet (Viton) od Wiper W Wearstrip tang in T ush U 90 Side ort $3.95 2Y S S olyk S S $55.31 $67.85 $82.97 $76.55 $94.60 $24.06 $89.80 $36.13 $98.30 $48.13 $2.94 $2.94 $5.60 $8.45 $8.45 $8.45 $8.45 $2.16 $2.16 $2.16 $5.97 $5.97 ST $7.89 $7.89 $4.08 $4.08 $4.08 $16.50 $16.50 $22.13 $9.53 $9.53 $16.55 $16.55 $3.86 $3.86 $3.86 $3.86 $3.86 $3.86 $3.86 $10.53 $10.53 $10.53 $10.53 $3.80 $3.80 $3.80 $3.95 $3.95 odel 4 (2 ore) odel ase Stroke per 1 umper agnet (Viton) od Wiper W Wear strip tang in T ush U 90 Side ort $3.95 2Y olyk $80.08 $93.70 $ $38.78 $51.81 $64.89 $6.21 $2.96 $2.96 $2.96 $5.97 $5.97 ST $9.54 $9.54 $4.08 $16.50 $16.50 $22.13 $3.86 $3.86 $3.86 $3.86 $3.86 $3.86 $3.80 $3.80 $3.80 odel 3 (2-1/2 ore) -21 oot ount rice $ am ut $ racket T-19 ccessories od levis $7.63 $5.46 rices effective an 2, 2017 = OT I
29 otes 29
30 otes 30
31 otes 31
32 -8 or more options see our -Series atalog or visit the configure page at O-I.O Stainless Steel ody ir ylinders atalog #SS-03 abco-ir.com rice & elivery ownloadable ylinders, Valves and ccessories atalog #V9 ancake II ir ylinders atalog #an2-2 Square ancake II ir ylinders atalog #Sqan2 ISO 6431 ylinders atalog #2-14 Twin od, on-otating ir ylinders - atalogs #-09 & #XS-09 igh losing orce ngular Grippers atalog #-10 ulti-ower ir resses atalog #16 Swing lamps atalog #S-04 inear Slides - 6 amilies atalog #S-03 ompact inger Slides atalog #-10 ISO 6432 ylinders atalog #-09 Stopper ylinders atalog #ST-S U Solenoid Valves atalog #V-10 Global Series etric ir ylinders atalog #G-15 ir ilot and Solenoid Valves atalog #V.-09 ir Table Slides atalog #GXS-10 Wide & arrow arallel Grippers - atalogs #Z-10 & #-10 Toggle Type ngular Grippers atalog #T-10 odular ir reparation System - s atalog #-06 Guided otion ir ylinders atalog #G-10 neumatic otary ctuators atalog # Series of ngular & arallel otion Grippers atalog #G8 neumatic & ydraulic Swing lamps atalog #. Wide Opening arallel Grippers atalog #-10 O-I, Inc th venue Gainesville, Tel (352) a (352) ail service@fabco-air.com 32
Valvair Manual Spool Valves
Valvair anual Spool Valves ir ilot, anual & echanically ctuated Section www.parker.com/pneu irectair rass oppet irectair Viking 0 V / Z eatures & Specifications... 5 art umbers...5-5 Technical ata... 55
More informationL & S Series Linear Slides
& S Series inear Slides asic Selection S Series (short) single bearing block design, short overall length. (Photo this page) Series (long) double bearing block design, increased bearing support. (Photo
More informationSquare 1 Air Cylinders
Square 1 ir Cylinders age General Standard Ratings and Sizing Guide.... Construction Details....,. How a Square 1 is built Standard Specifications....5 odel Number Codes....6 Option ist....6 How to Order....6
More informationBimba ISO 6432 Air Cylinders
6 1 3 5 2 4 7 meets YOU NDS... eliable Service, World-Wide - rom a world-wide leader producing millions of actuators each year nvironmental - re-lubricated for longer, maintenance free operation Noise
More informationViking Lite Series Valves Air Control Valves
atalog 0697 arker neumatic Viking ite Series Valves ir ontrol Valves The Viking ite valve range is robust, versatile and combines a large flow capacity with short change-over times, designer may choose
More information4-Way, 5-Port, 2 & 3-Position Solenoid and Remote Pilot 1/2" & 3/4" Ports. Technical & Service Data. Pneumatic
atalog VL-UTO-/US (Revised 6/0/0) pplication & Model Selection S utomotive Subbase Valves -Way, -ort, & -osition Solenoid and Remote ilot /" & /" orts pplication ual pressure or diverter valve operation
More informationValve Products. Viking Lite Series Valves. Operating information. Minimum operating pressure, PSIG (bar) Materials. Recommended air quality for valves
atalog 000-US arker neumatic Valve roducts Viking ite Valves The Viking ite valve range is robust, versatile and combines a large flow capacity with short change-over times, designer may choose /8, / or
More informationSquare 1 Air Cylinders
Square 1 ir Cylinders General Standard Ratings and Sizing Guide.... Page Construction Details....,. How a Square 1 is built Standard Specifications....5 odel Number Codes....6 Option ist....6 How to Order....6
More informationADEX Series. Air Control Valves. Section D
X Series ir ontrol alves 00.0 v.8 v.47 v ort 5 ort /8" ort Section www.parker.com/pneu/adex X iking Z asic alve unctions...00 asic alve eatures...0 ommon art umbers / R Type alves...02 odel umber Index
More informationHigh Performance Repairable Pneumatic Cylinder Parker Hannifin Corporation
High Performance Repairable Pneumatic Cylinder 219 Pneumatic ivision eatures Optional Piston Magnet Located under wear band, piston magnet is used for through-thebarrel sensors for electronic piston position
More informationValve Products Viking Lite Valves
atalog 0697- arker neumatic alve roducts iking ite alves The iking ite valve range is robust, versatile and combines a large flow capacity with short change-over times, designer may choose /8, / or /8
More informationACT-132. DC/91000/M, DC/93000/M Single acting Ø mm DC/9 / /
Series 90000 ompact Actuators D/91000/, D/93000/ Single acting Ø 12... 63 mm ne third the basic length of a corresponding IS/VDA model ow friction, long life seal design Fully non-corrodible specification
More information1 Cylinder. 1 - Cylinder Type 3 - Cylinder Capacity 4 - Cylinder Stroke. 2 - Cylinder Options. Cylinder Accessories
1 Type 30 06 T 2 3 4 5 apacity Stroke Options ode 1 - Type 3 - apacity 4 - Stroke ydraulic 2 - Options L LN LN P P T U U U ULN S/ - ollow ole / - eneral Purpose / - ollow ole / - igh Tonnage S/ - lat ody
More informationADEX Series Air Control Valves A00.01 Cv M3 Port A05.18 Cv M5 Port A12.47 Cv 1/8" Port zpv02 A B C D E F G H. Section H
X Series ir ontrol alves 00.0 v ort 05.8 v 5 ort.47 v /8" ort zpv02 Section www.parker.com/pneu/adex asic alve unctions... 2 asic alve eatures... ommon art umbers / R Type alves... 4 odel umber Index /
More informationMulti-Power Cylinders
ulti-power ylinders vailable in series ore sizes /" thru " trokes /8" thru " Original eries (shown right) ores -/8" thru " trokes /" thru " orces to,000 lbs. ( tons!) Pancake eries (see pages. to.7) ores
More informationIsys Micro Series. Valve Products. Operating information. Material specifications. Pilot configuration
atalog 000-3US The Valve System incorporates a space saving back to back valve mounting design, and achieves flow rates of 0.35 v per valve with valves having a combined width of mm. This plug-in valve
More informationOur policy is one of continued research and development. We therefore reserve the right to
D/99000, D/99000 ompact cylinders on-magnetic and magnetic piston Double acting Ø 12 to 160 mm ight weight ompact design, which is considerably shorter than IS/VDA or FA equivalent. ow friction characteristics
More informationISO Standard Hydraulic Cylinder
IO tandard ydraulic ylinder eries / eries eries Nominal pressure: a ore size :,,,, Q N Related quipment - Nominal pressure: a ore size : 3,,,,, 4 IO tandard ydraulic ylinder eries Nominal pressure a/ a
More informationHigh Thrust Air Cylinders. Catalog HP/MP
igh hrust ir ylinders atalog P/P Product Index i-power eries Page onstruction & engineering data......, ow to Order....................... 5 imensions...................... 6, 7 Option pecifications..............
More informationISO Standard Hydraulic Cylinder
IO tandard ydraulic ylinder eries / eries eries Nominal pressure: a ore size :,,,, Q N Related quipment - Nominal pressure: a ore size : 3,,,,, ourtesy of teven ngineering, Inc.- Ryan Way, outh an rancisco,
More informationNorgren Compact. Interchangeable Pneumatic Actuator. Section 9. Single Acting Compact. Double Acting Compact Interchangeable Pneumatic Actuator
Section 9 orgren Compact Interchangeable neumatic Actuator Single Acting Actuator...ACT-9-1 Double Acting Actuator...ACT-9-8 Single Acting Compact Interchangeable neumatic Actuator Double Acting Compact
More informationCYLINDERS. cylinders AIR MITE PNEUMATIC CYLINDERS TIE ROD CYLINDERS
YNRS 8 R MT PNUMT YNRS ine, and Micro ylinders. Our versatile cylinder product line can be used to meet their requirements. ll ir-mite s proudly carry the Made in US label. ylinders have a durable, maintenance-free
More informationENERPAC hydraulic valves are available in a wide variety of models and configurations.
irectional ontrol s EE hydraulic valves are available in a wide variety of models and configurations. Whatever your requirements directional control, flow control, or pressure control you can be sure that
More informationFKHS Series. 3 Jaw Parallel Motion Pneumatic Grippers. Mounting Hole. Sensor Capable. Bottom tapped holes. Dowel Hole & Slot
Catalog No. KHS- KHS Series Jaw Parallel Motion Pneumatic Grippers Mounting Hole Can be mounted from the gripper side Mounting slot for easy sensor installation Sensor Capable Bottom tapped holes Can be
More informationSeries NCM. Air Cylinder. Now available in 8 different bore sizes, 7/16" to 2".
ir Cylinder Series NCM Now available in 8 different bore sizes, 7/16" to 2". 5 ctuation options available: Double cting, Single Rod Double cting, Double Rod Non-rotating Rod Single cting, Spring Return
More informationInstallation, Maintenance & Operating Instructions
-SS VVS nstallation, aintenance & Operating nstructions - SS VVS TO The ulflo -Series feature both direct acting and internal pilot operated models with either screw or flange type connections. The threaded
More informationGlobal Series Air Cylinders
Global Series Air Cylinders Double Rod Options and Toolplates with interchange hole patterns for GT Series 2x øsp C bores opposite side for P SHCS KP EP KP 4x, GP threads (See pages 40-43) Global Series
More informationSeries MK ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63
otary lamp ylinder/standard Series MK ø, ø, ø, ø, ø, ø, ø5, ø ow to Order MK 1 3 S otary clamp cylinder Mounting Symbol Style ore size Through hole & both ends tapped (Standard) ø, ø oth ends tapped Through
More informationatalog /US asic eatures llen ey Sensor Locking lip ircuit ressure /12 5/32" Tube Instant onnections Driving ressure U xhaust ack ressure Thresho
Threshold Sensors... 2-3 locking Valves...4 3-Way, 2-osition Standard Duty... 5-8 Technical Data...9 Dimensions... 10-11 3-Way Miniature...12 Dimensions... Miniature and Standard Duty Limit Switches, ylinder
More informationMedium Duty Hydraulic Cylinders Series 3L
Medium Duty Hydraulic ylinders Series L Medium Duty Service Industrial Tie od onstruction Nominal Pressure 000 PSI Depending on ore Size Standard ore Sizes " through " Piston od Diameters /" through -/"
More informationIndustrial Cylinder Products Hydraulic and Pneumatic Cylinders. Catalog (01/11)
Industrial ylinder Products Hydraulic and Pneumatic ylinders atalog 00- (0/) Pneumatic ylinders Index Page Series, Heavy Duty, 0 P.S.I. ccessories - vailable Mountings and Specifications ushion Data -
More informationFDXS Series. required at temperatures below 0 C (32 F) None required, or ISO VG32. 0 ~ 5mm Standard with rubber bumper (both sides)
Bulletin FDXS-09 Features 1. Magnetic piston is standard in all sizes. 2. Non-rotating design enables precision positioning. ng. 3. Compact design saves space. 4. Suitable for multi-axis assemblies and
More informationVictory A-Series Actuators PRODUCT CATALOG V55A V43A FG1 V32A FG2 V26A
Victory -Series ctuators PROUT TLOG V55 with parallel motor mounting V4 G1 with parallel motor mounting V2 G2 with inline motor mounting V26 with inline motor mounting Longer, aster, and More Reliable
More informationNEN Series NFPA Aluminum Cylinders
NEN Series NP luminum ylinders 1-1/2" to 4" bore sizes ompetitively priced Magnetic piston standard djustable cushion standard Sleeve nut construction standard Stocked strokes Technical data Medium: iltered
More informationSingle Solenoid External Pilot Normally Closed
atalog 000- Operating ressure Internal ilot Solenoid Valves 3/" & 3/" ody 0 to 0 SI (standard) -/" ody to 0 SI (00 SI option available) Series Valves ilot Supply Internal ilot Remote ilot Valve Operating
More informationCATALOG GC Global Series Air Cylinders
CTO C-15 06 lobal Series ir Cylinders lobal Series Cylinders Providing Unmatched NO OO T YOU ET Page Here is FCO-I's Expanded ine of Space Saving ir Cylinders Innovation For 0 years our famous Pancakes
More informationValve Products. B Series Valve
atalog 000- arker neumatic Valve, an exceptional performing industrial valve in a compact size with an enhanced flow range. vailable in solenoid pilot operated and remote air pilot models. he series features
More informationHigh Pressure Industrial Hydraulic Equipment
High ressure Industrial Hydraulic quipment uilt o Last L O ONNS s 3-20 Single cting s 4-5 ouble cting s 6 Lock Nut s 7 Hollow Hole s 8 ouble cting Hollow Hole s 9 lat ody s 10 lat ody Kits 11 Low rofile
More informationSeries NCM. Air Cylinder. Stainless Steel Body Cylinders 7/16", 9/16", 3/4", 7/8", 1-1/16", 1-1/4", 1-1/2", 2" Bore
CT.ID2-2 ir Cylinder Series CM Stainless Steel ody Cylinders 7/16", 9/16", 3/4", 7/8", 1-1/16", 1-1/4", 1-1/2", 2" ore ow available in 7/16" and 9/16" bore Double Rod/Double End Mounting on-rotating Rod
More informationHigh Pressure Industrial Hydraulic Equipment
High ressure Industrial Hydraulic quipment uilt o Last L O ONNS s 3-20 Single cting s 4-5 ouble cting s 6 Lock Nut s 7 Hollow Hole s 8 ouble cting Hollow Hole s 9 lat ody s 10 lat ody Kits 11 Low rofile
More informationCompact Hydraulic Cylinder. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order Z73. Bore size. 20mm 25mm 32mm 40mm 50mm 63mm 80mm 100mm
ompact ydraulic ylinder MPa Series KG ø, ø, ø, ø, ø, ø, ø, ø0 With uto Switch With auto switch (built-in magnet) KG DKG Mounting: asic type 0 ore size ow to Order mm mm mm mm mm mm mm 0mm Z3 Refer to "uto
More informationCompact Cylinder. ISO Standard (21287) C55 Series. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. RoHS C85 C75 C96 C96Y C96K C55
55 96Y 96K 96 P96K P96 75R 75K-S/T 75K 75-S/T 75W 75 85R 85K-S/T 85K 85-S/T 85W 85 ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 Related ade to uto Products Order Switch ompact ylinder 55 Series ISO Standard
More informationISO Standard Hydraulic Cylinder
ISO Standard ydraulic ylinder Series S/SG Series S Q N Nominal pressure: S Pa ore size :,,,, Related quipment Series SG Nominal pressure: - Pa ore size : 3,,,,, 51 ISO Standard ydraulic ylinder Series
More information1.46 L INEAR A CTUATOR: AIR C YLINDER SERIES NCM A IR C YLINDER S ERIES NCM S TAINLESS S TEEL C YLINDERS H OW T O
1.46 L INEAR A CTUATOR: AIR C YLINDER A IR C YLINDER S TAINLESS S TEEL C YLINDERS Double Acting Single Acting / Spring Return / Extended NonRotate Option Available Double Rod Magnetic Piston for Auto Switch
More informationFULL COLOR TAB #6 TC 105
FULL COLOR TAB #6 TC 105 SERIES TC 2-STAGE TELESCOPING CYLINDER CONSTRUCTION FEATURES 3 Bore Sizes: 0.75, 1.50 and 2.50 Strokes up to 60 2-Stage Telescoping Space Saving Design 100% Double Action Heavy-Duty
More informationGlobal Series Air Cylinders
CTO C-1 0 Prices effective January 8, 18 lobal Series ir Cylinders Double od Options and Toolplates with interchange hole patterns for T Series x øsp C bores opposite side for P SHCS P EP P EP x, P threads
More informationParker Series 2A Air Cylinder
Parker ir ylinder hen the job calls for reliable, heavy-duty performance, specify. 00,000 psi yield strength chrome-plated, case-hardened piston rod.,000 psi yield strength rod-end stud with rolled threads.
More information10.7 Single Valve Gate Nozzle GAN...S01
Single Valve Gate Nozzle GN...S01 10.7 Single Valve Gate Nozzle GN...S01 10.7.1 echnical Data - Single Valve Gate Nozzle GN...S01 Doc003429.png Single Valve Gate Nozzle Valve pin operation Operation medium
More informationMulti-Power Cylinders
vailable in series sizes /" thru " trokes /8" thru " Original eries (shown right) s -/8" thru " trokes /" thru " orces to,000 lbs. ( tons!) Pancake eries (see pages. to.7) s /" thru " trokes /8" thru -/"
More informationFT SERIES. FT Series Linear Actuators
T SRS OR ROR SRW TUTOR Mount virtually any servo motor ong stroke lengths available igh speed and long life Motors shown in drawings are for illustrative purposes only and are not included with T ctuators.
More informationRound Type Hydraulic Cylinder
Round Type ydraulic Cylinder Series CM CQ Series CM CK C CM CS C2 C ominal pressure: 3. MPa ore size :,,, 233 3. MPa Round Type ydraulic Cylinder Series C M ø, ø, ø, ø With uto Switch ow to Order CM L
More informationSeries CQS. Compact Cylinder. Square body shape gives you flexibility for machine design
ompact ylinder Series QS ø, ø, ø, ø Ideal for machine designs with small space requirements The - and -M auto switches will not protrude from switch mounting groove. Square body shape gives you flexibility
More informationSUPERIOR CONSTRUCTION FEATURES SERIES B AIR CYLINDERS, 1 2" THRU 2" BORE SIZE MAXIMUM PSI 250
SUPERIOR CONSTRUCTION FEATURES SERIES B AIR CYLINDERS, 1 2" THRU 2" BORE SIZE MAXIMUM PSI 250 ALUMINUM HEADS & CAPS LARGE PORTS PISTON PACKING PISTON WIPER BRONZE BEARING PACKING TUBE SEAL CYLINDER TUBE
More informationRC-Series DUO Cylinders, Single-Acting. The Industry Standard General Purpose Cylinder.
R-Series UO ylinders, Single-cting Shown from left to right: R-506, R-50, R-2510, R-4, R-10010, R-55, R-1010 The Industry Standard General Purpose ylinder s ll R cylinders are equipped with hardened removable
More informationCATALOG GC Global Series Air Cylinders
CTO C-1 19 lobal Series ir Cylinders lobal Series Cylinders Providing Unmatched NO OO T YOU ET Here is FCO-I's Expanded ine of Space Saving ir Cylinders Innovation For years our famous Pancakes have dominated
More informationRound Head and Square Head Tie Rod Cylinders
S5-7-R 5-7 Round Head and Square Head Tie Rod ylinders Features & Benefits.... General, Standard Ratings.... onstruction Information.... How a Longstroke is built odel Number hart.... How to Order Option
More informationValve Products Directair Valve Series
atalog 000- arker neumatic irectair alve eries rass oppet / liding eal - eries ockout alves eatures irectair, /8" valves oppet style.7 v conomical -way normally closed function irectair, /8" valves acked
More informationSMD2. Compact cylinder. Space saving structure 6, 10, 16 20, 25, 32. Simple square design. Switch integrated. Easy centering. Precise installation
pace saving structure Overview his direct mount cylinder is a high rigidity/small square air cylinder with excellent installation accuracy and multisurface direct mount. he square shaped body improves
More information10.6 Single Valve Gate Nozzle 16S01_V
Single Valve Gate Nozzle 16S01_V 10.6 Single Valve Gate Nozzle 16S01_V 10.6.1 echnical Data - Single Valve Gate Nozzle 16S01_V Doc003304.png Single Valve Gate Nozzle including ctuator HY2314S01 Valve pin
More informationPower Clamp Cylinder
ower lamp ylinder onforming to the ew S Standard Series Z2 ompliant ew Special /()U or rance ZR or urope ZT or orth merica Z2 2T/2/ () or sia 2 55 Toggle link mechanism aintains secure and powerful support.
More informationEZ Series Linear Slides
EZ Series Linear Slides Optional owel ole/slot ode Optional slip fi t dowel holes and slip fit dowel slots allow for repeatably precise slide mounting and/or attachment of end tooling. Option may be specifi
More informationSeries CNS. Cylinder with Lock Double Acting, Single Rod - X X1166. ø125, ø140, ø160. How to Order. Without auto switch With auto switch
ylinder with Lock ouble Acting, Single Rod Series S ø1, ø, ø ow to Order Without auto switch With auto switch S S L L 1 1 1 1 - X16 - X16 uilt-in magnet L 1 ounting style asic style oot style Rod side
More informationResilient Seat Butterfly Valve with Electric Actuator Two-Way and Three-Way
Resilient Seat utterfly with Electric ctuator ocument o. 15-030 escription utterfly assemblies provide excellent flow control of hot water, chilled water, condenser water, thermal storage systems, and
More informationHow to Order. Nil M. Action S T. Load voltage Wiring. M9NV 5 V, 12 V 3-wire (PNP) M9PV 12 V. F9NWV 5 V, 12 V 3-wire (PNP) F9PWV
ompact ylinder: Standard Type Single cting, Single Rod, Spring Return/Extend Series QS ø, ø, ø, ø How to Order QS S QS S FWV S uilt-in magnet Mounting style Through-hole/oth ends tapped common (Standard)
More informationReduced by Max. 58% Maximum allowable stroke when using clevis bracket CS2 CS Stroke (mm)
ir ylinder 7. kg eight Reduced by Max. 58% ew arge ore Sizes ø15, ø, ø ighter installation achieved by reducing weight. Die cast rod cover and head cover used to achieve greater weight reduction. Rod bore
More informationValvair II. Solenoid Operated Directional Spool Valves. Section E.
(evised 04-05-2012) olenoid Operated irectional pool Valves ection www.parker.com/pneu O IT OT OU. 227 www.comoso.com arker annifin orporation neumatic ivision X odular egulators... 244-245 ccessories...
More informationhydraulic power clamps
ourtesy of M/Flodyne/ydradyne Motion ontrol ydraulic Pneumatic lectrical Mechanical (8) 426-548 www.cmafh.com hydraulic power clamps Table of ontents ydraulic lamping 1-21-4 1-21-51 1-21-72 1-211-2 1-211-4
More informationLow Friction Cylinders
ow riction ylinders Series Metal Seal Type P.112 Series QT Standard type Q ateral load resisting type (uilt-in ball bushing) ompact ow riction ylinder Series Q Operating pressure range (MPa) 0.00 to 0.
More informationTable of Contents Introduction... 2 Amphenol MIL-DTL-5015 and MIL-5015 Type Standard Cylindrical Connectors General Information, Class
able of ontents age Introduction...................................... 2 mphenol I--5015 and I-5015 ype tandard ylindrical onnectors eneral Information, lass esignations............................. 3
More informationPin Cylinder. Series CJP. Double Acting/Single Acting Spring Return. Standard Variation Built-in Magnet. Single Rod. Single Rod Spring return
Pin Cylinder eries ouble cting/ingle cting pring Return Variations eries tandard tyle eries With uto witch ouble cting (Non-lube) ingle cting (Non-lube) ction ingle Rod ingle Rod pring return tandard Variation
More informationAir Valve AIR-PILOTED VALVES
K-UV002 Ver.1.0 ir Valve I-ILOTED VLVES INSTUCTI MNUL Ver.1.0 ir-piloted Valves Features Since the unit requires air piping only, with no need for electrical wiring, it can be handled by a person without
More information1.56 L INEAR A CTUATORS: AIR C YLINDERS S ERIES CA1
1.56 L INEAR A CTUATORS: AIR C YLINDERS A IR C YLINDER Auto switch sensing optional s Ø4, 5, 63, 8, 1 Non-rotating piston rod & double rod types available Ultra low friction, maximum 5% Long life, high
More informationhydraulic power clamps
hydraulic power clamps Table of ontents lick Page # View ydraulic lamping Page M-Y-# ydraulic lamping Page M-Y-# 1-21-4 1-21-51 1-21-72 1-211-2 1-211-4 1-211-52 1-211-54 1-212-4 3-4 3-1-S-475 3-1--475
More informationRound Type Hydraulic Cylinder
Round Type ydraulic Cylinder CM Series CQ CK C CM CS C C D- CM Series ominal pressure: 3. MPa ore size :,,, 3 3. MPa Round Type ydraulic Cylinder CM Series ø, ø, ø, ø pplicable uto Switches/Refer to pages
More informationVNA Application example. 3-port dual pressure, N.C. type SGH. Nozzle SGH. Coolant pump
igh Pressure oolant Valve eries Pa/ orresponding to high speed grinding and long drilling processes oolant valve for high pressure coolant liquid (up to Pa/) that is ideal for lubrication, dust blowing
More informationWorm Gear Hand Winches Up to 4000 lb capacity
IO 900 ertified Worm Gear and Winches Up to 4000 lb capacity achine ut Worm Gears provide accurate operation and long lasting service. nclosed Oil ath provides continuous lubrication of gears to minimize
More informationPower Clamp Cylinder
ower lamp ylinder onforming to the ew S Standard Series Z2 ompliant ew Special /()U or rance ZR or urope ZT or orth merica Z2 2T/2/ () or sia 2 ourtesy of Steven ngineering, nc.-2 Ryan Way, South San rancisco,
More informationSpring Return and Double Acting Pneumatic Quarter- Turn Actuators For Output Torques to 13,444 lb.in.
Spring Return and ouble cting Pneumatic Quarter- Turn ctuators For Output Torques to 13,444 lb.in. Features and benefits ompact rack and pinion design utilizes the whole piston area to develop output torque.
More informationCatalog PAN2-2. Pancake. II Air Cylinders. Superior Interchangeable Industrial Air Cylinders
Catalog PN2-2 Pancake II ir Cylinders Superior Interchangeable Industrial ir Cylinders Pancake II Cylinders Product Index Standard Series PSD, PSR, PSX, PWD, PTD How it works....................................
More informationCompact Cylinder. Series CQS CUJ CU CQS CQ2 RQ CQM MU
Compact Cylinder Series ø, ø, ø, ø Ideal for machine designs with small space requirements The D-M auto switch will not protrude from switch mounting groove. Square body shape gives you flexibility for
More informationHydraulic Systems Hydraulic Clamping
ydraulic Systems 19. 1 ydraulic lamping Page ydraulic lamping Page 1-21-4 1-21-51 1-21-72 1-211-2 1-211-4 1-211-52 1-211-54 1-212-4 19.2-19.3 3-1-S-475 3-1--475 19.6 52-Series 19.3 3-1-S-11 19.7 3-1--11
More informationSection Contents. Product Reference Guide Numbering System / How To Order & 16. Selection Procedure... 17
Section ontents roduct Reference uide... - umbering System / ow To Order... 4 & 6 Selection rocedure.... 7 ssemblies and ounting ositions... 8-9 Recommended Lubricants... 0 R Selection Tables..................................................
More informationSeries M Solid state to -56/Z76-59/Y59-5P/Y7P -J59/Y59-59/Y7N Surge absorber (+) Reverse flow prevent diode ( ) (+) ( ) (+) ( ) (+) (+) ( )
asic iring Solid state 3 wire NPN (hen power source for and load is not common.) Sink input specifications 3-wire NPN Switch 3-wire N connection for NPN output (using relays) Series M uto Switch onnections
More informationSine Cylinder. Series REC. ø20, ø25, ø32, ø40 REA REB REC C Y C X MQ RHC RZQ. Sine cylinder. Individual. Velocity curve. Speed. Conventional cylinder
Sine Cylinder Series,,, llows high speed transfer of work with dramatically reduced shock/impact. Velocity curve RE RE Speed Time Sine cylinder Conventional cylinder 3 Sine Cylinder Series,,, llows rapid
More information50S, 150S, 300S, 800S/50D, 150D, 300D, 800D ORDERING INSTRUCTIONS. Model No. Single vane PRN50S PRN150S PRN300S PRN800S
IROTOR/Standard type Rseries 5S, 15S, 3S, 8S/5, 15, 3, 8 ORRI ISTRUTIOS R5S 9 45 2 Single vane R5S R15S R3S R8S 9 9 18 18 27 27 28 28 reference point 45 45 4 4 1 2 3 4 5 6 ouble vane R5 R15 R3 R8 ounting
More information1.134 L INEAR A CTUATOR: AIR C YLINDER S ERIES C95
1.134 L INEAR A CTUATOR: AIR C YLINDER H O W M ADE I N USA T ECHNICAL T O O R D E R C95 AIR C YLINDERS C95 P ISTON R OD S Basic K Non-Rotating P ISTON - Basic D Magnetic B ORE IN MM 50 63 80 100 B S T
More informationSine Cylinder. REC Series. ø20, ø25, ø32, ø40. Allows high speed transfer of work with dramatically reduced shock/impact. REA REB REC Smooth
Sine Cylinder Series,,, llows high speed transfer of work with dramatically reduced shock/impact. RE RE RC Velocity curve Time Sine cylinder Current cylinder Sine Cylinder Series,,, llows rapid transfer
More informationSeries HB Solid Brass Cylinders
Series HB Solid Brass Cylinders or General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8, /, Bores Magnetic piston available to operate Aurora stainless proximity
More informationThe Complete Range of Fluid Power Products
The omplete Range of Fluid Power Products lectropneumatics & ydraulics (India) Pvt. Ltd. Fluid Power ivision (FP) lectropneumatics Fluid Power ivision (FP) lectropneumatics and ydraulics (I) Pvt. Ltd.
More informationPNEUMATIC ROTARY ACTUATORS
Bulletin FRA.C-09 Prices effective September 1, 2011 PNEUMATIC ROTARY ACTUATORS FRA & FRC Series FRA Series Features 1. Magnetic pistons are standard on all models. 2. Compact design saves space. 3. Rectangular
More informationMid Series Venturi Vacuum Pump with Pneumatic Blow-off and Silencer
id Series Venturi Vacuum ump with neumatic low-off and Silencer astbreak id Series: V1X & V1X-AD V1X-150 V1X-150-AD Standard ump: V1X & V1X-AD air-powered venturi vacuum pumps are trusted for accurate
More informationHeavy Duty Bench Top Presses
Heavy Duty Bench Top Presses Model: BTP-501 (FOR SINGLE PISTON ROD, 5 BORE, MF1 MOUNT CYLINDERS) Model: BTP-502 (FOR TRA TRIPLE PISTON ROD, 5 BORE, MF1 MOUNT CYLINDERS) Heavy Duty Bench Top Press shown
More informationR100/R200 Series & VR100/VR200 Series Spiral Bevel Gear Drives
R100/R200 Series & R100/R200 Series Spiral evel ear rives R100/R200 R100/R200 oston R and R 100 and 200 Series Spiral evel ear oxes are available in four sizes with horsepowers ranging from 2.19 to 50.92.
More informationHygienic Design Cylinder
ygienic Design ylinder Series Y water resistant cylinder configured for easy cleaning Series Y ISO standard type Series Y asic type Series YQ With guide Series YG J G Y Series 0 0 External seal material
More informationThe BVA Advantage. Confidence Built on Quality
1 The V dvantage V Hydraulics was launched in 2003 and is centrally located in the United States in Kansas ity, Missouri. V is one of the Shinn u of merica ompanies including; Hein-Werner, Omega Lift,
More informationPILOT CHECK VALVES. CAT: BFP/VCAR Page: 55 SHEET: 1/1 PILOT CHECK VALVES
IOT K VVS I/// T: F/V age: ST: / IOT K VVS VS SI TI IOT K VVS - I-I MOUTI The pilot-operated check valve blocks a single-acting actuator in any position. Tapered poppet in tempered and ground steel, released
More information3 Position Cylinder. RZQ Series. Provides intermediate stop mechanism. ø32, ø40, ø50, ø63. 2-stage stroke enabled with a small increase in length
Position ylinder Series ø, ø, ø, ø Provides intermediate stop mechanism 2-stage stroke enabled with a small increase in length Overall length of cylinder tube DQ2 Full stroke First-stage stroke dditional
More informationCatalog PAN2-2. II Air Cylinders. Pancake. Superior Interchangeable Industrial Air Cylinders
Catalog PN- Prices effective September 1, 011 Pancake II ir Cylinders Superior Interchangeable Industrial ir Cylinders 5-8-10 Pancake II Cylinders Product Index Standard Series PSD, PSR, PSX, PWD, PTD
More informationCylinder with Lock CNA. ø40, ø50, ø63, ø80, ø100 Suitable for intermediate stops, emergency stops and drop prevention
ylinder with Lock Series ø, ø, ø, ø, ø Suitable for intermediate stops, emergency stops and drop prevention Simple construction force magnifying mechanism is employed based on the wedge effect of the taper
More informationCompact Cylinder with Lock
ompact ylinder with ock Series Q ø, ø, ø, ø, ø, ø, ø, ø J2 2 1 1 N N N NS S Q RQ U P 1 rop prevention when the pressure of air source is decreased or the residual pressure is released. rop prevention for
More information