SMD2. Compact cylinder. Space saving structure 6, 10, 16 20, 25, 32. Simple square design. Switch integrated. Easy centering. Precise installation
|
|
- Emma Harris
- 5 years ago
- Views:
Transcription
1 pace saving structure Overview his direct mount cylinder is a high rigidity/small square air cylinder with excellent installation accuracy and multisurface direct mount. he square shaped body improves efficiency in the design stage. his cylinder meets needs such as small, high density and high precision in pneumatic system. eatures imple square design pace saving, simple and small square shape. witch integrated Proximity or reed switches are integrated. asy centering ocket and spigot on rod side enables easy alignment. Precise installation irect mount enables precise rod axis center parallelism and perpendicularity. hree types of mounting style hree types of mounting style such as rod side mounting, head side mounting and high rigid mounting types are available. wo lead wire directions ompact cylinder O,, 1, 2, eries variation 00 Product introduction 02 ariation and option selection table 03 afety precautions 04 ouble acting single rod type () 0 ingle acting extend type () ingle acting retract type (Y) ouble acting fine speed type () 2 ouble acting nonrotating type (M) 30 series common dimensions of types with switches 3 P*2 M2 wo switch lead wire directions such as axial and radial types. ompact cylinder pace saving structure 999
2 eries variation ompact cylinder eries eries eries variation P*2 M2 ariation ouble acting single rod type with switch ingle acting extend type with switch ingle acting retract type with switch ouble acting fine speed type with switch ouble acting nonrotating type with switch L Model no. JI symbol L Y YL L M ML ore size (mm),, 1, 2,,, 1, 2,,, 1, 2,,, 1, 2,,, 1, 2, tandard stroke length (mm) Mounting style (ote 1) Min. stroke length (mm) Max. stroke length (mm) ustom stroke length (per mm) : tandard, Option P*2 M2 ompact cylinder pace saving structure Rod end mounting type ead end mounting type : Option, igh rigid mounting type : ustom order, opper and P free P witch :ot available Page
3 P*2 M2 onvenient four surfaces installation hree types of mounting style are available with an easy operation. our surfaces direct mount is possible. mall, square shaped, and compact cylinder ( to ) hree types of mounting style lexible 4 direct installation surfaces 3 ide installation 2 Rod end Installation ( type only) (1) op surface installation (4) ead end installation etecting switch simply integrated 1 op surface installation (4 surfaces) 4 ead end installa ( type only) witch position adjustment is possible at the front wo types of detecting switch xial and radial lead wire directions rod side mounting type head side mounting type high rigid mounting type (3) ide installation witch simply installed without projection from the body. pace saving. (K2Y*/K3Y* excluded. ) (1) op surface installation (2) Rod end installation (3) ide installation (4 surfaces) (3 surfaces) (1) op surface installation (3) ide installation ccurate alignment with socket and spigot etecting switch asy position adjustment. ocket and spigot provided at bush section enables easy alignment. ( type only) 02
4 ariation and option selection table ode ccessory Option Port thread ariation ouble acting basic type ingle acting extend type ingle acting retract type onrotating type ith cylinder switch ine speed type P opper and P free type lean room specifications (exhaust treatment) lean room specifications (vacuum treatment) lean room specifications (exhaust treatment) lean room specifications (vacuum treatment) ustomized piston rod end form ylinder switch Rod eye Rod clevis 1 bracket 2 bracket ymbol lank Y M L P P P1 P2 P3 ** Listed on I Y 1 2 : Option : vailable (custom order) : vailable dipending on condition (consult with K) : ot available ode ariation Port thread Option ouble acting basic type ingle acting extend type ingle acting retract type onrotating type ith cylinder switch ine speed type P opper and P free type lean room specifications (exhaust treatment) lean room specifications (vacuum treatment) lean room specifications (exhaust treatment) lean room specifications (vacuum treatment) ustomized piston rod end form autions ote 1. If the size of the screw at the piston rod end is changed, this combination does not apply. onsult with K. ote 2. Refer to the "lean omponent ystem (catalog o. 033)" for clean room specifications P*. ote 3. P specifications are available as standard. (Required no indication for P ) ote 4: hen combining the clean specifications with the nonrotating type, the guide bar will slide separately from the piston rod. here are dust generating sections other than the piston rod, so this will be handled with separate symbols (P2 (exhaust treatment) and P3 (vacuum sweep)). <xample of model number> M L 1 K0 Model no. ariation Indicate symbols from left to right on the left table. Model no.: ompact cylinder Mounting style ore size o Y troke length Port thread type ariation: onrotating with switch fine speed type Mounting style : Rod end mounting type ore size : 1 mm Port thread type : Rc thread troke length : mm witch model no. : Reed K0 switch, lead wire 1 m witch quantity : 2 Option : one ccessory : one M L P P P1 ote 3 ote 3 ote 3 witch model no. ote 3 ote 3 ote 3 ote 3 ote 4 witch quantity ote 4 P2 P3 ** ote 1 ote 1 ccessory Option Indicate symbols from left to right on the left table. eries ariation and option selection table 03 P*2 M2 ompact cylinder pace saving structure
5 P*2 M2 Pneumatic components afety precautions lways read this section before starting use. Refer to Intro 1 for general details on the cylinder, and to Intro for details on the cylinder. ompact cylinder eries 1. ine speed type UIO Use with oilfree specifications. Lubrication may change characteristics. ssemble the flow control valve near the cylinder. djustments become unstable if assembled away from the cylinder. Use the 3/M, 3, M3/M, 3U eries speed control valve. enerally, the higher air pressure, and the smaller load pressure result in the more stable operation. Keep the load factor at 0% or less. table speed control is achieved with a meterout circuit. hen driving the single rod cylinder at fine speed with the operation direction set to PU, poppingout may occur if operation is started when load resistance is small. s a countermeasure, use (b), (c), or (d) circuit.ote that the (d) circuit is the most stable. a c PU: meterout PU: meterout PU: meterin PU: meterout b d PU: meterin PU: meterin PU: meterin/out PU: meterout esign & election (ote 2) hen installed vertically, the load will drop naturally if the meterin circuit is used. Use the meterout circuit in this case. peed control is unstable rops naturally when lowering (ote 3) onnect the peed control valve in the parallel with the following circuit. (ause of popping out) Reduce the flow rate to reach a fine speed at the exhaust side in a materout circuit. his results in the same pressure level on the both sides immediately after valve switched. he thrust caused by the differential of pressurized area of piston is applied to the PU direction and a poppingout of piston rod occurs. (uide for popping out occurrence) Popping out occurs when: the piston rod area x air pressure> load resistance. o not apply lateral load a cylinder. Install the cylinder to avoid the sliding guide to be twisted. he presence of load or resistance variation may result in unstable operations. Operation of a guide having a large difference in stationary and moving friction may become unstable. d peed adjustment method of PU operation of circuit: 1. et the speed with the x speed control valve 2. Lower the flow rate with the y speed control valve until popping out no longer occurs 3. Reconfirm speed void use with vibration. he product would be adversely affected by vibration and operation may become unstable. (ote 1) hen b, c and d are compared, d circuit operation is most stable. 04
6 eries 2 cylinders in parallel 3 or more cylinders in parallel 1. ommon UIO he cylinder may malfunction if a magnetic substance, such as a steel plate, is nearby. Move the magnetic substance to at least 3.mm from the cylinder. (ame clearance for all bore sizes) hen installing cylinders adjacently, provide the following installation pitch to prevent switches from malfunctioning. djacent conditions orizontal installation ertical installation Install the switch on the opposite side of the cylinder at the side. ertical installation Install switch at side of adjacent cylinder. orizontal installation ertical installation 2. ingle acting /Y UIO witch witch model no. K0, K K2, K3 K0, K K2, K3 K0, K K2, K3 K0, K K2, K3 K0, K K2, K3 K0, K K2, K3 K0, K K2, K3 K0, K K2, K3 K0, K K2, K3 K0, K K2, K3 o not leave the single acting cylinder in the pressurized state. If left pressurized, the piston rod may not return with spring power when pressure is released. Installation & djustment mm and over ine speed type Magnetized device such as steel plate, etc. Remarks Unit: mm ote that when the cylinder is installed, the switch position cannot be adjusted if the driver length is longer than the dimension. ote that when the cylinder is installed, the switch position cannot be adjusted if the driver length is longer than the dimension. UIO djust the core, etc., so lateral load is not applied to the cylinder. djust and install so the sliding guide is not twisted. Operation may become unstable due to fluctuations and load resistance. Operation of a guide having a large difference in stationary and moving friction may become unstable. P*2 M2 1. onrotating type M UIO o not place fingers between the baffle nonrotating plate and cylinder tube. ingers may get caught between the nonrotating plate and cylinder tube when the piston rod is pulled in. o not place fingers here. uring Use & Maintenance 0 ompact cylinder pace saving structure
7 P*2 M2 pecifications escriptions ore size mm ctuation orking fluid Max. working pressure MPa Min. working pressure MPa ithstanding pressure MPa mbient temperature Port size troke tolerance orking piston speed mm/s ushion Lubrication llowable energy absorption J troke length 1 2 L (with switch) 1 2 ouble acting ompressed air to 0 (no freezing) M Rc1/ to 00 Rubber cushioned ot required (when lubricating, use turbine oil lass 1 IO.) tandard stroke length (mm),, 1,, 2, 30,, 1,, 2, 30, 40, 0 Min. stroke length with switch Model L L/ mm ote 1: ustom stroke length is available per 1mm increment. ore size ompact cylinder, double acting single rod type eries ore size:,, 1,, 2, JI symbol Max. stroke length (mm) 0 0 ouble acting Min. stroke length (mm) 1 1 color indicator type 2 color indicator type ith preventive maintenance output K* K* K*Y K*Y K*Y* K*Y*
8 witch specifications 1 color/2 color indicator Proximity 2wire Proximity 3wire Reed 2wire escriptions K2/K2 K2Y/K2Y K3/K3 K3P/K3P K3Y/K3Y (ustom order) K0/K0 K/K pplications Output method Power voltage Programmable controller Programmable controller, relay P output PP output P output to 2 Programmable Programmable controller, relay controller, relay I circuit (w/o indicator light), serial connection Load voltage Load current to 30 to m (ote 1) 30 or less 0m or less /24 to 0m 1 to m //24 0m or less 1 m or less Light L (O lighting) Red/green L (O lighting) L (O lighting) Yellow L (O lighting) Red/green L (O lighting) L (O lighting) Leakage current 1m or less or less 0m ote 1: Max. load current above: m at 2. he current will be lower than m if ambient temperature around switch is higher than 2. ( to m at 0 ) ith preventive maintenance output escriptions Proximity 3wire Proximity 4wire Proximity 3wire Proximity 4wire K2Y/ K3Y/ K2YM/ K3YM/ pplications Output method Programmable controller Programmable Programmable Programmable controller controller, relay controller, relay P output Installation position adjustment Red/green L (O lighting) Preventive maintenance output Yellow L (O lighting) Power voltage Load voltage Load current Leakage current Load voltage to 30 to m 1m or less to 2 30 or less 0m or less or less 30 or less to 30 to m 1.2m or less to 2 30 or less 0m or less or less Load current Leakage current m or less 0m or less to m or less or less 0m or less Light Output Preventive maintenance output ylinder weight Model no. ore size upport type 1 2 Product weight when stroke length = 0mm ouble acting lean room specifications L ouble acting/with switch Unit (g) dditional weight per = mm (atalog o. 033) ust generation preventing structure for use in clean room P* P* iscrete cylinder switch weight ame ylinder switch (xample) Product weight L1K2 Model no. K0 K2 K3 K 1m eries pecifications Lead wire length 3m Unit (g) m Product weight at stroke length = 0mm g dditional weight when =mm g x / = g eigh of two cylinder switches 1g x 2 = 3g Product weight g + g + 3g = 13g P*2 M2 ompact cylinder pace saving structure 0
9 eries P*2 M2 ow to order ithout switch ith switch L <xample of model number> L1K0R 1 K2 R Port thread type ote on model no. selection ore size troke length (head end mounting type) (high rigid mounting type) mm stroke mm stroke mm stroke mm stroke Model: ompact cylinder Mounting style : Rod end mounting type ore size : mm Port thread type : Rc thread troke length : 1mm witch model no. : Reed switch K0, lead wire length 1m witch quantity : 1 on rod end ow to order switch K2 Mounting style ore size ote 1: or mounting style "" or "", if "" indicated on "witch selection table", K* type (axial lead wire) cannot be installed. Please use K* type (radial lead wire). witch selection table ote 2: Refer to page 0 for min. stroke length with switch. ote 3: opper and P free as standard. witch model no. ote 1 witch quantity ymbol escriptions Mounting style Rod end mounting type ead end mounting type igh rigid mounting type 1 2 ) custom order thread (only ) custom order troke length (mm) ore size troke length ote 2 ustom stroke length to 1 1 to 0 y 1 mm increment to 1 to 0 witch model no. xial lead wire K0* K* K2* K3* K3P* K2Y* K3Y* K2Y* K3Y* K2YM* K3YM* K0* K* K2* K3* K3P* K2Y* K3Y* K2Y* K3Y* K2YM* K3YM* *Lead wire length lank Port thread type lank Rc thread P thread (only Radial lead wire 1m (standard) 3m (option) m (option) witch quantity R 1 on rod end 1 on head end wo ontact Indicator Lead wire Reed Proximity 1 color indicator type ithout indicator light 1 color indicator type 1 color indicator type (custom order) 2 color indicator type 2 color indicator type (/o indicator light for preventive maintenance output) 2 color indicator type (/ indicator light for preventive maintenance output (1 color)) 2wire 2wire 3wire 3wire 2wire 3wire 3wire 4wire 3wire 4wire witch model no. (Item above) 0
10 Internal structure and parts list ouble acting/with switch, magnet builtin type L, 1,, 2, ouble acting, 1,, 2, o. Parts name Material 1 2 Piston rod ap tainless steel luminum alloy 3 Rod packing seal itrile rubber 4 Rod bushing ylinder body asket luminum alloy luminum alloy itrile rubber ushion rubber (R) Urethane rubber Piston luminum alloy 9 Piston packing seal itrile rubber Repair parts list Kit o. K K 1K Remarks o., 2, industrial chrome plating lumite 13 ard alumite Parts name pacer Material luminum alloy ushion rubber () Urethane rubber ase plate luminum alloy asket itrile rubber type snap ring teel Magnet Plastic Mount luminum alloy exagon socket head cap bolt lloy steel exagon nut teel Remarks hromate Phosphoric acid zinc lack alumite lackening ickeling Repair parts number Kit o. Repair parts number K K K 1 1 eries ouble acting single rod type 13 P*2 M2 ompact cylinder pace saving structure 09
11 eries P*2 M2 imensions ouble acting/with switch, rod end mounting type (L), 1,, 2, ymbol 1 2 ymbol 1 2 idth across flats idth across flats M J.. M M M M2. depth M3 depth M4 depth 3.4 (penetrating).9 spot face depth (penetrating).9 spot face depth. 4. (penetrating). spot face depth M3 M4 M M M M depth M depth. (penetrating) 9 spot face depth.. (penetrating) 9 spot face depth 9. M M Rc1/ M depth 9. (penetrating). spot face depth M x ith switch /o / /o / K0/K K2/K3 K0/K K2/K3 switch switch switch switch K M ote 1: and dimensions for, stroke will differ from these due to manufacturing. ote 2: egative dimension shows dimensions of projecting section of switch from main body. ote 3: Refer to page 3 for, and dimensions of projecting section of 2 color indicator type preventive maintenance output switch. 2J 2J 4K 2 + stroke length + stroke length 2J 2J 4K 2 + stroke length + stroke length R 2 U 2 U R U
12 imensions ouble acting/with switch, head end mounting type (L), ymbol 1 2 ymbol 1 2 1,, 2, U 2 2 U idth across flats idth across flats J K eries ouble acting single rod type M MP. M M2. depth 3.4 (penetrating).9 spot face depth.3 M M M M M M3 depth M4 depth M depth M depth 3.4 (penetrating) 4. (penetrating). (penetrating). (penetrating).9 spot face depth.. spot face depth 9 spot face depth. 9 spot face depth 9. M4 M M M Rc1/ M depth 9. (penetrating). spot face depth M x ith switch Y /o / /o / K0/K K2/K3 K0/K K2/K3 switch switch switch switch ote 1: and dimensions for, stroke will differ from these due to manufacturing. ote 2: egative dimension indicates dimensions of projecting section of switch from main body. ote 3: or, mm stroke cylinders, use K* switch because K* switch cannot be installed. ote 4: or mm stroke cylinder, use K* switch because K* switch cannot be installed. M MP MP Y 2 2J + stroke length + stroke length 2J 4K 2 2J + stroke length + stroke length R 2J 4K ote : Refer to page 3 for / and dimensions of projecting section of 2 color indicator type preventive maintenance output switch. R U P*2 M2 ompact cylinder pace saving structure
13 eries P*2 M2 imensions ouble acting/with switch, high rigid mounting type (L), ymbol 1 2 ymbol 1,, 2, 1 2 idth across flats idth across flats J K M. M M2. depth 3.4 (penetrating).9 spot face depth.3 M M M3 depth 3.4 (penetrating).9 spot face depth. M M.4.4 M4 depth 4. (penetrating). spot face depth M M M depth. (penetrating) 9 spot face depth. M M M depth. (penetrating) 9 spot face depth 9. M Rc1/ M depth 9. (penetrating). spot face depth M x ith switch /o / /o / K0/K K2/K3 K0/K K2/K3 switch switch switch switch ote 1: and dimensions for, stroke will differ from these due to manufacturing. ote 2: egative dimension indicates dimensions of projecting section of switch from main body. ote 3: or, mm stroke cylinders, use K* switch because K* switch cannot be installed. ote 4: or mm stroke cylinder, use K* switch because K* switch cannot be installed. M Y 2J 2J 4K 2J 2 2J 2J 4K + stroke length + stroke length 2 2J + stroke length + stroke length P 2J 4K R 2J 4K ote : Refer to page 3 for / and dimensions of projecting section of 2 color indicator type preventive maintenance output switch. R U
14 P*2 M2 pecifications escriptions ore size ctuation mm (L) Y (L) orking fluid Max. working pressure MPa Min. working pressure MPa (L) Y (L) ithstanding pressure MPa mbient temperature Port size troke tolerance orking piston speed ushion mm mm/s (L) Y (L) Lubrication llowable energy absorption J troke length 1 2 Model L YL L/ YL/ ore size , Y L, YL (with switch) 1 2 ingle acting, extend type ingle acting, retract type ompressed air 0. 1 color indicator type 2 color indicator type ith preventive maintenance output K* K* K*Y K*Y K*Y* K*Y* to 0 (no freezing) M Rc1/ to 00 Rubber cushioned at only retract side Rubber cushioned at only extend side ot required (when lubricating, use turbine oil lass 1 IO.) ote: o not leave the single acting cylinder in the pressurized state. If left in the pressurized state, the piston rod may not return with spring force when pressure is released tandard stroke length (mm) Max. stroke length (mm),, 1 ote 1: ustom stroke length is available per 1mm increment. Min. stroke length with switch ompact cylinder, Y eries ore size:,, 1,, 2, JI symbol ingle acting, extend type single acting extend type/with switch single acting retract type/with switch ingle acting, retract type Min. stroke length (mm)
15 witch specifications 1 color/2 color indicator Y cylinder weight (eight with switch is with a 2 piece by cylinder switch lead wire length 1m.) Unit (g) troke length (mm) 1 upport type /o switch ith switch /o switch ith switch /o switch ith switch /Y spring load ore size (mm) 1 troke length (mm) troke length ull stroke length during operation ore size (mm) 2 troke length (mm) iscrete cylinder switch weight ylinder switch troke length ame Unit: ull stroke length during operation Model no. K0 K2 K3 K 1m Y eries pecifications Proximity 2wire Proximity 3wire Reed 2wire escriptions K2/K2 K2Y/K2Y K3/K3 K3P/K3P K3Y/K3Y (ustom order) K0/K0 K/K pplications Output method Power voltage Programmable controller Programmable controller, relay P output PP output P output to 2 Programmable Programmable controller, relay controller, relay I circuit (without indicator light), serial connection Load voltage to or less /24 1 //24 1 Load current to m (ote 1) 0m or less to 0m to m 0m or less m or less Light L (O lighting) Red/green L (O lighting) L (O lighting) Yellow L (O lighting) Red/green L (O lighting) L (O lighting) Leakage current 1m or less or less 0m ote 1: Max. load current above: m at 2. he current will be lower than m if ambient temperature around switch is higher than 2. ( to m at 0 ) ith preventive maintenance output escriptions Proximity 3wire Proximity 4wire Proximity 3wire Proximity 4wire K2Y/ K3Y/ K2YM/ K3YM/ pplications Output method Programmable controller Programmable Programmable Programmable controller controller, relay controller, relay P output Installation position adjustment section Red/green L (O lighting) Preventive maintenance output Yellow L (O lighting) Power voltage Load voltage Load current Leakage current Load voltage to 30 to m 1m or less to 2 30 or less 0m or less or less 30 or less to 30 to m 1.2m or less to 2 30 or less 0m or less or less Load current Leakage current m or less 0m or less to m or less or less 0m or less Light Output Preventive maintenance output Lead wire length 3m Unit (g) m 1 P*2 M2 ompact cylinder pace saving structure
16 Y eries P*2 M2 ow to order ithout switch ith switch L ore size 1 2 Model no. ote on model no. selection (head end mounting type) mm stroke mm stroke Mounting style ore size 1 (high rigid mounting type) mm stroke mm stroke YL (single acting retract type) ore (head end mounting type) (high rigid mounting type) size mm stroke mm stroke mm stroke mm stroke K2 R Port thread type troke length ote 1: or mounting style "" or "", if "" indicated on "witch selection table", K* type (axial lead wire) cannot be installed. Please use K* type (radial lead wire). witch selection table L (single acting extend type with switch) ote 2: Refer to page for min. stroke length with switch. ote 3: opper and P free as standard. witch model no. ote 1 witch quantity ymbol escriptions Model no. ingle acting extend type Y ingle acting retract type Mounting style Rod end mounting type ead end mounting type igh rigid mounting type Port thread type lank troke length (mm) ore size troke length ote 2 to 1 to 1 witch model no. xial lead Radial lead wire wire ontact K0* K0* K* K* K2* K2* K3* K3* K3P* K3P* K2Y* K2Y* K3Y* K3Y* K2Y* K2Y* K3Y* K3Y* K2YM* K2YM* K3YM* K3YM* *Lead wire length lank 1m (standard) 3 3m (option) m (option) witch quantity R Rc thread P thread (only ) custom order thread (only ) custom order 1 on rod end 1 on head end wo Reed Proximity Proximity ustom stroke length 1 mm increment Indicator 1 color indicator type ithout indicator light 1 color indicator type 1 color indicator type (custom order) 2 color indicator type 2 color indicator type (/o indicator light for preventive maintenance output) 2 color indicator type (/ indicator light for preventive maintenance output (1 color)) Lead wire 2wire 2wire 3wire 3wire 2wire 3wire 3wire 4wire 3wire 4wire 1 <xample of model number> L1K0R Model: ompact cylinder Model no. Mounting style : ingle acting extend type : Rod end mounting type ore size : mm Port thread type : Rc thread troke length : 1mm witch model no. : Reed switch K0, lead wire length 1m witch quantity : 1 on rod end ow to order switch K2 witch model no. (Item above)
17 eries Internal structure and parts list Internal structure and parts list ingle acting extend type/with switch, magnet builtin type L, 1,, 2, ingle acting extend type, 1,, 2, o. Parts name 1 exagon nut 2 Rod bushing 3 ylinder body 4 pring Piston rod pring holder pacer Magnet Repair parts list Material teel luminum alloy luminum alloy teel tainless steel luminum alloy luminum alloy Plastic Remarks ickeling lumite ard alumite lectrode position coating, 2, Industrial chrome plating o. Parts name Material 9 Piston packing seal Piston itrile rubber luminum alloy ushion rubber () Urethane rubber 13 asket ase plate itrile rubber luminum alloy type snap ring teel 1 Mount luminum alloy 1 exagon socket head cap bolt lloy steel Remarks hromate Phosphoric acid zinc lack alumite lackening Kit o. Repair parts number Kit o. Repair parts number K K K 1K 9 2 2K K 9 9 P*2 M2 ompact cylinder pace saving structure 1
18 Y eries P*2 M2 Internal structure and parts list o ingle acting retract type/with switch, magnet builtin type YL, 1,, 2, ingle acting, retract type Y, 1,, 2, Parts name Material exagon nut teel ap luminum alloy Rod packing seal itrile rubber ylinder body luminum alloy Rod bushing luminum alloy asket itrile rubber Piston rod tainless steel ushion rubber (R) Urethane rubber Repair parts list Kit o. YK YK Y1K 9 Remarks ickeling ard alumite lumite, 2, industrial chrome plating Repair parts number o. Parts name Material 9 13 pacer Magnet Piston packing seal Piston pring ase plate luminum alloy Plastic itrile rubber luminum alloy teel luminum alloy 1 type snap ring teel 1 Mount luminum alloy 1 exagon socket head cap bolt lloy steel Kit o. YK Y2K YK Remarks lectrode position coating hromate Phosphoric acid zinc lack alumite lackening Repair parts number 3 1
19 imensions ingle acting extend type/with switch, rod end mounting type (L), 1,, 2, ymbol 1 2 ymbol 1 2 idth across flats idth across flats M J K. M M M2. depth 3.4 (penetrating).9 spot face depth M3 depth 3.4 (penetrating).9 spot face depth. M3 M M.4.4 M4 depth 4. (penetrating). spot face depth M M M depth. (penetrating) 9 spot face depth. M M M depth. (penetrating) 9 spot face depth 9. M Rc1/ M depth 9. (penetrating). spot face depth M x ith switch st st 1st st st 1st K0/K K2/K3 K0/K K2/K3 /o / /o / /o / /o / /o / /o / ote 1: and dimensions for, stroke will differ from these due to manufacturing. ote 2: egative dimension indicates dimensions of projecting section of switch from main body. ote 3: Refer to page 3 for, and dimensions of projecting section of 2 color indicator type preventive maintenance output switch. 2J 2J 4K 2J 2J 4K M R eries ingle acting extend type R 2 U U 2 U 19 P*2 M2 ompact cylinder pace saving structure
20 eries P*2 M2 imensions ingle acting extend type/with switch, head end mounting type (L), 1,, 2, ymbol 1 2 ymbol 1 2 U 2 2 U idth across flats idth across flats J K. M M2. depth 3.4 (penetrating).9 spot face depth.3 M M M3 depth 3.4 (penetrating).9 spot face depth. M M.4.4 M4 depth 4. (penetrating). spot face depth M M M depth. (penetrating) 9 spot face depth. M M M depth. (penetrating) 9 spot face depth 9. M Rc1/ M depth 9. (penetrating). spot face depth M x ith switch st st 1st st st 1st K0/K K2/K3 K0/K K2/K3 /o / /o / /o / /o / /o / /o / ote 1: and dimensions for, stroke will differ from these due to manufacturing. ote 2: egative dimension indicates dimensions of projecting section of switch from main body. ote 3: or, mm stroke cylinders, use K* switch because K* switch cannot be installed. ote 4: or mm stroke cylinder, use K* switch because K* switch cannot be installed. MP MP M Y Y 2J 2J 4K 2J R 2J 4K M MP R ote : Refer to page 3 for / and dimensions of projecting section of 2 color indicator type preventive maintenance output switch. U
21 imensions ingle acting extend type/with switch, high rigid mounting type (L), 1,, 2, ymbol 1 2 ymbol 1 2 idth across flats idth across flats J K. M M2. depth 3.4 (penetrating).9 spot face depth.3 M M M3 depth 3.4 (penetrating).9 spot face depth. M M.4.4 M4 depth 4. (penetrating). spot face depth M M M depth. (penetrating) 9 spot face depth. M M M depth. (penetrating) 9 spot face depth 9. M Rc1/ M depth 9. (penetrating). spot face depth M x ith switch st st 1st st st 1st K0/K K2/K3 K0/K K2/K3 /o / /o / /o / /o / /o / /o / ote 1: and dimensions for, stroke will differ from these due to manufacturing. ote 2: egative dimension indicates dimensions of projecting section of switch from main body. ote 3: or, mm stroke cylinders, use K* switch because K* switch cannot be installed. ote 4: or mm stroke cylinder, use K* switch because K* switch cannot be installed. M P 2J 2J 4K 2J 2J 4K P 2J 2J 4K 2J M R 2J 4K eries ingle acting extend type R ote : Refer to page 3 for / and dimensions of projecting section of 2 color indicator type preventive maintenance output switch. U 21 P*2 M2 ompact cylinder pace saving structure
22 Y eries P*2 M2 imensions ingle acting retract type/with switch, rod end mounting type Y(L), ymbol 1 2 ymbol 1,, 2, 1 2 idth across flats idth across flats M J K M R U st st 1st. M M2. depth 3.4 (penetrating).9 spot face depth.3 M M M3 depth 3.4 (penetrating).9 spot face depth. M M.4.4 M4 depth 4. (penetrating). spot face depth M M M depth. (penetrating) 9 spot face depth. M M M depth. (penetrating) 9 spot face depth 9. M Rc1/ M depth 9. (penetrating). spot face depth M x ith switch st st 1st st st 1st K0/K K2/K3 K0/K K2/K3 /o / /o / /o / /o / /o / /o / ote 1: and dimensions for, stroke will differ from these due to manufacturing. ote 2: egative dimension indicates dimensions of projecting section of switch from main body. ote 3: Refer to page 3 for, and dimensions of projecting section of 2 color indicator type preventive maintenance output switch. 2J 2J 4K 2J 2J 4K R 2 U 2 U 22
23 imensions ingle acting retract type/with switch, head end mounting type Y(L), ymbol 1 2 ymbol 1,, 2, U 2 U idth across flats idth across flats J K M MP R U st st 1st M M M M M M2. depth 3.4 (penetrating).9 spot face depth.3 M3 depth 3.4 (penetrating).9 spot face depth. M4 depth 4. (penetrating). spot face depth M depth. (penetrating) 9 spot face depth. M depth. (penetrating) 9 spot face depth 9. M3 M4 M M M Rc1/ M depth 9. (penetrating). spot face depth M x ith switch Y st st 1st st st 1st K0/K K2/K3 K0/K K2/K3 /o / /o / /o / /o / /o / /o / ote 1: and dimensions for, stroke will differ from these due to manufacturing. ote 2: egative dimension shows dimensions of projecting section of switch from main body. ote 3: or mm stroke, use K* switch because K* switch cannot be installed. M MP MP Y Y 2J 2J 4K 2J 2J R 4K Y eries ingle acting retract type ote 4: Refer to page 3 for / and dimensions of projecting section of 2 color indicator type preventive maintenance output switch. P*2 M2 ompact cylinder pace saving structure 23
24 Y eries P*2 M2 imensions ingle acting retract type with switch, high rigid mounting type Y(L), ymbol 1 2 ymbol 1,, 2, 1 2 idth across flats idth across flats J K M R U st st 1st. M M2. depth 3.4 (penetrating).9 spot face depth.3 M M M3 depth 3.4 (penetrating).9 spot face depth. M M.4.4 M4 depth 4. (penetrating). spot face depth M M M depth. (penetrating) 9 spot face depth. M M M depth. (penetrating) 9 spot face depth. M Rc1/ M depth 9. (penetrating). spot face depth M x ith switch st st 1st st st 1st K0/K K2/K3 K0/K K2/K3 /o / /o / /o / /o / /o / /o / ote 1: and dimensions for, stroke will differ from these due to manufacturing. ote 2: egative dimension indicates dimensions of projecting section of switch from main body. ote 3: or mm stroke cylinder, use K* switch because K* switch cannot be installed. M 2J 2J 4K 2J 2J 4K 2J 2J 4K 2J R 2J 4K ote 4: Refer to page 3 for / and dimensions of projecting section of 2 color indicator type preventive maintenance output switch. 24
25 P*2 M2 pecifications escriptions ore size mm ctuation orking fluid Max. working pressure MPa Min. working pressure MPa ithstanding pressure MPa mbient temperature Port size troke tolerance mm orking piston speed mm/s ushion Lubrication llowable energy absorption J troke length Model no. L ote 1: ustom stroke length is available per 1mm increment. ompact cylinder, fine speed type eries ore size:,, 1,, 2, JI symbol ouble acting /L (with switch) 1 2 ouble acting ompressed air to 0 M to 0 Rubber cushioned Must be oil free ,, 1, 2, Min. stroke length with switch Model L L/,, 1,, 2, 30,, 1,, 2, 30, 40, Rc 1/ tandard stroke length (mm) Max. stroke length (mm) Min. stroke length (mm) ore size color indicator type 2 color indicator type ith preventive maintenance output K* K* K*Y K*Y K*Y* K*Y* lean room specifications (atalog o. 033) ust generation preventing structure for use in clean room P* 2
26 eries pecifications witch specifications 1 color/2 color indicator Proximity 2wire Proximity 3wire Reed 2wire escriptions K2/K2 K2Y/K2Y K3/K3 K3P/K3P K3Y/K3Y (ustom order) K0/K0 K/K pplications Output method Power voltage Programmable controller Programmable controller, relay P output PP output P output to 2 Programmable Programmable controller, relay controller, relay I circuit (without indicator light), serial connection Load voltage Load current to 30 to m (ote 1) 30 or less 0m or less /24 to 0m 1 to m //24 0m or less 1 m or less Light L (O lighting) Red/green L (O lighting) L (O lighting) Yellow L (O lighting) Red/green L (O lighting) L (O lighting) Leakage current 1m or less or less 0m ote 1: Max load current above: m at 2. he current will be lower than m if ambient temperature around switch is higher than 2. ( to m at 0 ) ith preventive maintenance output escriptions Proximity 3wire Proximity 4wire Proximity 3wire Proximity 4wire K2Y/ K3Y/ K2YM/ K3YM/ pplications Output method Programmable controller Programmable Programmable Programmable controller controller, relay controller, relay P output Installation position adjustment section Red/green L (O lighting) Preventive maintenance output Yellow L (O lighting) Power voltage Load voltage Load current Leakage current Load voltage to 30 to m 1m or less to 2 30 or less 0m or less or less 30 or less to 30 to m 1.2m or less to 2 30 or less 0m or less or less Load current m or less 0m or less to m or less 0m or less Leakage current or less Light Output Preventive maintenance output eight P*2 M2 ompact cylinder pace saving structure It is the same as the double acting/single rod type series. Refer to page 0. imensions It is the same as the double acting/single rod type series. Refer to pages to. 2
27 eries P*2 ow to order ithout switch 1 ith switch L ore size K2 Mounting style Port thread type troke length ote on model no. selection ote 1: or mounting style "" or "", if "" indicated on "witch selection table", K* type (axial lead wire) cannot be installed. Please use K* type (radial lead wire). witch selection table ore (head end mounting type) (high rigid mounting type) size mm stroke mm stroke mm stroke mm stroke 1 2 ote 2: Refer to page 2 for min. stroke length with switch. M2 <xample of model number> L1K0R Model: ompact cylinder fine speed type Mounting style : Rod end mounting type ore size : mm Port thread type : Rc thread troke length : 1mm witch model no. : Reed switch K0, lead wire length 1m witch quantity : 1 on rod end ow to order switch K2 1 R witch model no. ote 1 witch quantity ymbol escriptions Mounting style Rod end mounting type ead end mounting type igh rigid mounting type Port thread type lank Rc thread P thread (only ) (custom order) thread (only ) (custom order) troke length (mm) ore size troke length ote 2 ustom stroke length to 1 to witch model no. xial lead Radial lead wire wire K0* K0* K* K* K2* K2* K3* K3* K3P* K3P* K2Y* K2Y* K3Y* K3Y* K2Y* K2Y* K3Y* K3Y* K2YM* K2YM* K3YM* K3YM* *Lead wire length lank 3 1 to 0 1 to 0 1m (standard) 3m (option) m (option) witch quantity R 1 on rod end 1 on head end wo ontact Reed Proximity Proximity 1 mm increment Indicator 1 color indicator type ithout indicator light 1 color indicator type 1 color indicator type (custom order) 2 color indicator type 2 color indicator type (/o indicator light for preventive maintenance output) 2 color indicator type (/ indicator light for preventive maintenance output (1 color)) Lead wire 2wire 2wire 3wire 3wire 2wire 3wire 3wire 4wire 3wire 4wire witch model no. (Item above) 2
28 P*2 M2 pecifications escriptions ore size mm ctuation orking fluid Max. working pressure MPa Min. working pressure MPa ithstanding pressure MPa mbient temperature Port size troke tolerance mm orking piston speed mm/s ushion Lubrication Revolvable angle tolerance ote llowable torque m llowable energy absorption J troke length M ML (with switch) 1 2 ouble acting ompressed air to 0 (no freezing) M Rc1/ to 00 Rubber cushioned ot required (when lubricating, use turbine oil lass 1 IO.) ote: alue for stroke 0 (excluding piston rod deflection) tandard stroke length (mm) Max. stroke length (mm),, 1,, 2, ,, 1,, 2, 30, 40, 0 0 ote 1: ustom stroke length is available per 1mm increment. Min. stroke length with switch ML Model ore size 1 2 ompact cylinder, double acting nonrotating type M eries ore size:,, 1,, 2, JI symbol M ouble acting nonrotating type Min. stroke length (mm) 1 1 color indicator type 2 color indicator type ith preventive maintenance output K* K* K*Y K*Y K*Y* K*Y*
29 witch specifications 1 color/2 color indicator Proximity 2wire Proximity 3wire Reed 2wire escriptions K2/K2 K2Y/K2Y K3/K3 K3P/K3P K3Y/K3Y K0/K0 K/K (ustom order) pplications Programmable controller Programmable controller, relay Programmable Programmable controller, relay controller, relay I circuit (without indicator light), serial connection Output method Power voltage P output PP output P output to 2 Load voltage to or less /24 1 //24 1 Load current to m (ote 1) 0m or less to 0m to m 0m or less m or less Light L (O lighting) Red/green L (O lighting) L (O lighting) Yellow L (O lighting) Red/green L (O lighting) L (O lighting) Leakage current 1m or less or less 0m ote 1: Max. load current above: m at 2 ith preventive maintenance output. he current will be lower than m if ambient temperature around switch is higher than 2. ( to m at 0 ) escriptions Proximity 3wire Proximity 4wire Proximity 3wire Proximity 4wire K2Y/ K3Y/ K2YM/ K3YM/ pplications Programmable controller Programmable Programmable Programmable controller controller, relay controller, relay Output method Installation position adjustment section P output Red/green L (O lighting) Preventive maintenance output Yellow L (O lighting) Power voltage Load voltage Load current Leakage current Load voltage to 30 to m 1m or less to 2 30 or less 0m or less or less 30 or less to 30 to m 1.2m or less to 2 30 or less 0m or less or less Load current Leakage current m or less 0m or less to m or less or less 0m or less ylinder weight Unit (g) iscrete cylinder switch weight Unit (g) Product weight when stroke length = 0mm Model no. dditional weight Lead wire length M ML ame Model no. double acting double acting/with switch per = mm 1m 3m m K K2 1 2 ylinder switch K K (xample) Product weight ML1K2 Product weight when stroke length = 0mm 9g dditional weight when =mm g x / = g eigh of two cylinder switches 1g x 2 = 3g Product weight 9g + g + 3g = g M2 Light Output P*2 ompact cylinder pace saving structure Preventive maintenance output M eries pecifications 31
30 M eries P*2 M2 ow to order ithout switch M ith switch 1 ML 1 K2 R ote on model no. selection ote 1:or the item indicated by "" on the switch selection guide, K* type (axial lead wire) switch cannot be installed. Use K* type (radial lead wire) switch. witch selection table ore size mm stroke mm stroke 1 2 <xample of model number> ML1K0R troke length witch model no. ote 1 Model: ompact cylinder ore size : mm Port thread type : Rc thread troke length : 1mm witch model no. : Reed switch K0, lead wire length 1m witch quantity : 1 on rod end ow to order switch ore size K2 Port thread type ote 2: Refer to page 30 for min. stroke length with switch. ote 3: opper and P free as standard. witch quantity ymbol escriptions troke length (mm) ore size troke length ote 2 ustom stroke length witch model no. xial lead Radial lead wire wire K0* K0* K* K* K2* K2* K3* K3* K3P* K3P* K2Y* K2Y* K3Y* K3Y* K2Y* K2Y* K3Y* K3Y* K2YM* K2YM* K3YM* K3YM* *Lead wire length Port thread type lank to 1 to lank 3 Rc thread P thread (only ) (custom order) thread (only ) (custom order) 1 to 30 1 to 0 1m (standard) 3m (option) m (option) witch quantity R 1 on rod end 1 on head end wo ontact Reed Proximity Proximity 1 mm increment Indicator 1 color indicator type ithout indicator light 1 color indicator type 1 color indicator type (custom order) 2 color indicator type 2 color indicator type (/o indicator light for preventive maintenance output) 2 color indicator type (/ indicator light for preventive maintenance output (1 color)) Lead wire 2wire 2wire 2wire 3wire 2wire 3wire 3wire 4wire 3wire 4wire witch model no. (Item above)
31 Internal structure and parts list o ouble acting nonrotating type (with switch) ML, ouble acting nonrotating type M, Parts name exagon nut exagon socket head cap bolt onrotating plate ap Rod packing seal ylinder body Rod bushing asket Piston rod ushion rubber (R) pacer Repair parts list ,, 2, ote: o not move the position of baffle plate (3) when using. Moving the position results in insufficient performance of nonrotation function.,, 2, ote: o not move the position of baffle plate (3) when using. Moving the position results in insufficient performance of nonrotation function. Material Remarks o. Parts name Material teel ickeling Magnet Plastic lloy steel lackening 13 Piston packing seal itrile rubber luminum alloy hromate Piston luminum alloy luminum alloy 1 ushion rubber () Urethane rubber itrile rubber 1 asket itrile rubber luminum alloy ard alumite 1 ase plate luminum alloy luminum alloy lumite 1 type snap ring teel itrile rubber 19 exagon socket set screw lloy steel tainless steel, 2, industrial uide bar tainless steel chrome plating 21 onrotating bush Placental Urethane rubber 22 Mount luminum alloy luminum alloy 23 exagon socket head cap bolt lloy steel Kit o. K K 1K Repair parts number Kit o. K 2K K M eries Internal structure and parts list Remarks hromate Phosphoric acid zinc lackening industrial chrome plating lack alumite lackening Repair parts number P*2 M2 ompact cylinder pace saving structure 33
32 M eries P*2 M2 imensions ouble acting nonrotating type (with switch) M (L), or mm bore size and and mm stroke, K* switch cannot be installed. Use K* switch. or mm bore size and mm stroke, K* switch cannot be installed. Use K* switch. ouble acting nonrotating type (with switch) M (L),, 2, ymbol 1 2 ymbol 1 2 or 1, mm bore size and mm stroke, K* switch cannot be installed. Use K* switch M (Penetrating) M M (Penetrating) M M M ithout M M M M M 13.4 M 1.4 M.4 M 2.4 M.4 Rc1/ 40.4 ith M M M M ithout J 3.4 (penetrating) 3.4 (penetrating) 4. (penetrating). (penetrating). (penetrating). (penetrating) ith idth across flats P M M idth across flats P K.9 spot face depth.3.9 spot face depth.. spot face depth 9 spot face depth. 9 spot face depth 9.. spot face depth ith switch M M3 M4 M M M M x 1.2 M M M M M M M M M M3 M3 M4 M M M ote 1: and dimensions for, stroke will differ from these due to manufacturing. ote 2: or and mm stroke, use K* switch because K* switch cannot be installed. ote 3: or mm stroke, use K* switch because K* switch cannot be installed. ote 4: Refer to page 3 for / and dimensions of projecting section of 2 color indicator type preventive maintenance output switch stroke length + stroke length 2 + stroke length + stroke length 2J 2J 4K R P R K0/K K2/K3 K0/K K2/K J 2J 4K
33 M eries imensions of types with switches imensions (2 color indicator type, preventive maintenance output switch) ML (with switch: K2Y/, K3Y/) ML (with switch: K2Y/, K3Y/, K2YM/, K3YM/) K K2Y K2Y K P*2 M ompact cylinder pace saving structure
34 eries P*2 M2 series common dimensions of types with switches (2 color indicator type, preventive maintenance output switch) L (with switch: K2Y/, K3Y/) L YL ote: If the dimensions are negative, the leadin dimensions from the cylinder end are indicated. L (with switch: K2Y/, K3Y/, K2YM/, K3YM/) L YL 1 L YL K K2Y K K2Y L L L YL L YL L L L YL ote: If the dimensions are negative, the leadin dimensions from the cylinder end are indicated. 3
MSDG Series. Axial space saving structure and precise guided type. High precision, high rigidity and space saving High precision guided
U SM2 Axial space saving structure and precise guided type Axial space saving Compact axial length Footprint reduced Long service life design (approximate 4 times (CKD comparison)) Oil impregnated copper
More informationMechanically Jointed Rodless Cylinder High Precision Guide Type. How to Order 16 G 300 L M9N. Stroke. Refer to Standard Stroke table.
Mechanically Jointed Rodless ylinder igh Precision uide Type eries MY/T ø, ø, ø T MY uide type igh precision guide with single axis igh precision guide with double axis ymbol Nil TN TF Type M thread Rc
More informationSeries variation. STS/STL Series. Guided cylinder. STS/STL Series. : Standard, : Option, : Custom order, : Not available Bearing method.
eries variation Guided cylinder T/TL eries T/TL eries eries variation CP*2 CK2 CA2 C DC2 VC D2 D* JK/2 U J3 L LC HC R RL2 RG2 FC Variation Double acting single rod type Double acting stroke adjustable
More informationPosition locking clamp cylinder. UCAC2 Series. Bore size: ø50, ø63. Double acting single rod type
Position locking clamp cylinder U2 Series : ø50, ø63 XXXXX Series Specifications JIS symbol Descriptions U2 mm ø50 ø63 ctuation Double acting Working fluid ompressed air Max. working pressure MPa 1.0 Min.
More informationValve Mounted Cylinder. Action Built-in magnet. With air cushion. Double acting. Standard. Nonrotating rod. Standard. rod. Standard. rod.
eries V/MVGQ,,,, 2,,,, 63,, eries Variations eries eries V ction uilt-in magnet With air cushion variations uilt-in One-touch fitting With auto switch With strong scraper Page RE RE X ouble acting -1-
More informationKing Of Valve Co.,Ltd.
Series variation Series Series Series variation SCP* SCP* U Variation Double acting lubrication type Double acting oil-free type, with switch Double acting Stroke adjustable type (Extended) Double acting
More informationRotary actuator Rack & pinion type. Size: 8, 32, 63 Oscillating angle: 90, 180,
G V* H FH HP S2 H/ LH LHG HL/ HLG/ G HL HM G S *H H2 L2 N/ S/F Specifications escriptions Size ffective torque Note 1 N m ctuation Working fluid Max. working pressure MPa Min. working pressure Note 2 MPa
More informationPin Cylinders. Series CJP2/CJP. 2 auto switches can even be mounted on a cylinder with ø4 bore size (5 mm stroke). One-touch fitting can be connected.
Pin ylinders eries JP/JP auto switches can even be mounted on a cylinder with ø ( mm stroke). uto switch One-touch fitting can be connected. (Panel mount type) ø One-touch fitting, miniature fitting, and
More informationStandard Type Dual-Rod Cylinder. ø6, ø10, ø15, ø20, ø25, ø32. How to Order
Standard Type ual-rod ylinder Series ø, ø, ø, ø, ø2, ø32 ompact Type J M L M earing type Slide bearing all bushing bearing How to Order 0 Y7W S Number of auto switches Nil 2 pcs. S pc. n "n" pcs. ore size/standard
More informationCJ2-Z. Cushion. Rubber bumper (Standard) Air cushion
eries ow to Order 1/ /22 J2 ø1, ø ir ylinder Ro lean series 1 ushion Rubber bumper (tandard) ir cushion 1 J 2 L R M9W 21 J 2 L R M9W opper, fluorine and siliconefree + Low particle generation 21 22 Vacuum
More informationCompact Cylinder SSD2 Series
Installation on four faces Compact Cylinder SSD2 Series Compact Cylinder SSD2 Series Wide variation COMPACT CYLIDER SSD2 SERIES Double acting double rod non-rotating type added! The cylinder switch can
More informationValve Mounted Cylinder. Action Built-in magnet. With air cushion. Double acting. Standard. Nonrotating rod. Standard. rod. Standard. rod.
eries /, 12,,,,,,, 3,, eries Variations eries eries Action Built-in magnet With air cushion tandard variations Built-in One-touch fitting With auto switch With strong scraper Page CX ouble acting -- CY
More informationISO Standard Hydraulic Cylinder
IO tandard ydraulic ylinder eries / eries eries Nominal pressure: a ore size :,,,, Q N Related quipment - Nominal pressure: a ore size : 3,,,,, 4 IO tandard ydraulic ylinder eries Nominal pressure a/ a
More informationLarge bore size cylinder SCS2 Series
Large bore size cylinder C2 eries ew product LGE BOE IZE CYLIDE C2 EIE Large Mass eduction! 50% mass reduction by using aluminum for covers and tubes CC-1118 2 oh compliant Large Mass 50% mass reduction
More informationPin Cylinder. Series CJP. Double Acting/Single Acting Spring Return. Standard Variation Built-in Magnet. Single Rod. Single Rod Spring return
Pin Cylinder eries ouble cting/ingle cting pring Return Variations eries tandard tyle eries With uto witch ouble cting (Non-lube) ingle cting (Non-lube) ction ingle Rod ingle Rod pring return tandard Variation
More informationISO Standard Hydraulic Cylinder
IO tandard ydraulic ylinder eries / eries eries Nominal pressure: a ore size :,,,, Q N Related quipment - Nominal pressure: a ore size : 3,,,,, ourtesy of teven ngineering, Inc.- Ryan Way, outh an rancisco,
More informationand High precision guide provided High cylinder position accuracy, and wide guide realizes radial moment resistant high rigid structure.
and For linear slide cylinder, wide and high precision guide is used. This is high precision actuator with increased operational reliability. (6, 8,, 6, 0, mm) High precision guide provided High cylinder
More informationMounting style. Custom stroke length (per mm) Max. stroke length (mm) Axial foot type. Basic type
U SM Series variation Variation ouble acting single rod type ouble acting nonrotating type Product introduction Model no. JIS symbol M Bush ry bearing ( ) Oilless metal (,, ) used. Stable operation can
More informationand High precision guide provided High cylinder position accuracy, and wide guide realizes radial moment resistant high rigid structure.
and For linear slide cylinder, wide and high precision guide is used. This is high precision actuator with increased operational reliability. (6, 8,, 6, 0, mm) High precision guide provided High cylinder
More informationCompressed air to
G G A S F J 2 N/ S/F Specifications escriptions Cylinder bore size Working fluid mm Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational stroke length mm Rod
More informationFree position locking flat and compact cylinder UFCD Series
Space-saving cylinder ensures safety during work in power failures or accidents. Free position locking flat and compact cylinder UFCD Series Free position locking flat and compact cylinder UFCD Series
More informationReduced by Max. 58% Maximum allowable stroke when using clevis bracket CS2 CS Stroke (mm)
ir ylinder 7. kg eight Reduced by Max. 58% ew arge ore Sizes ø15, ø, ø ighter installation achieved by reducing weight. Die cast rod cover and head cover used to achieve greater weight reduction. Rod bore
More informationSeries MK ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63
otary lamp ylinder/standard Series MK ø, ø, ø, ø, ø, ø, ø5, ø ow to Order MK 1 3 S otary clamp cylinder Mounting Symbol Style ore size Through hole & both ends tapped (Standard) ø, ø oth ends tapped Through
More informationCylinder with Lock. MNB Series. A locking cylinder ideal for intermediate stops, emergency stops and drop prevention. ø32, ø40, ø50, ø63, ø80, ø100
ylinder with Lock M Series ø, ø, ø, ø, ø, ø locking cylinder ideal for intermediate stops, emergency stops and drop prevention. Simple construction force magnifying mechanism is employed based on the wedge
More informationFeatures. Maintenance is simplified with the separable scraper section adapter.
New Products Environment Resistant Scraper Type Cylinder SSD/STG-G5 Series New Product Features A fiber aggregate (lube keeping structure) has been mounted on the scraper cylinder. Fine dust not captured
More informationSeries variation. Rotary actuator (vane mechanism) RV3* Series. Compact (RV3*1 to RV3*30) : Standard, : Option, : Not available
F J H2 L2 N/ S/F Variation Standard type With valve ngle variable type Series variation ompact ( to ) Model no. RVS RV RVS RV RVS RV RVS2 RV2 RVS RV RVS V W RV V W RVS V W2 RV V W2 RVS V W RV V W RVS RV
More informationCompact Hydraulic Cylinder. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order Z73. Bore size. 20mm 25mm 32mm 40mm 50mm 63mm 80mm 100mm
ompact ydraulic ylinder MPa Series KG ø, ø, ø, ø, ø, ø, ø, ø0 With uto Switch With auto switch (built-in magnet) KG DKG Mounting: asic type 0 ore size ow to Order mm mm mm mm mm mm mm 0mm Z3 Refer to "uto
More informationCJ1. Air Cylinder. Double Acting: ø4/single Acting, Spring Return: ø2.5, ø4 CJ1B 4 5 U4. How to Order/Double Acting
Air Cylinder eries CJ1 ouble Acting: ø/ingle Acting, pring Return: ø2., ø eries Variations tandard eries CJ1 eries Action ouble acting ingle acting Mounting style asic style ingle rod ingle rod pring return
More informationBore size: JSC3: φ40/φ50/φ63/φ80/φ100. JSC4: φ125/φ140/φ160/φ180
764 Min. stroke length with switch ( switch) Brake cylinder: Double acting, single rod/double acting, no-lubrication -N Series : JSC3: φ40/φ50/φ63/φ80/φ100 JSC4: φ125/φ140/φ160/φ180 JIS symbol Specifications
More informationLube, Non-lube: ø125, ø140, ø160, ø180, ø200, ø250, ø300 Air-hydro: ø125, ø140, ø160. How to Order. Bore size. 125mm 140mm 160mm
ir Cylinder/tandard eries C, : ø, ø, ø, ø, ø, ø, ø : ø, ø, ø How to Order B L F G C D T C L Mounting Foot Front flange Rear flange ingle clevis Double clevis Center trunnion JR Rod boot/cushion Rod boot
More informationMedium bore size cylinder Double acting, non-rotating type. CMK2-M Series. Bore size: 20, 25, 32, 40
U SM Specifications Double acting, nonrotating type M Series Bore size:,,, JIS symbol Note: alue when stroke length is 0 mm (excluding deflection of piston rod). Double acting nonrotating cylinder single
More informationHow to Order. Nil M. Action S T. Load voltage Wiring. M9NV 5 V, 12 V 3-wire (PNP) M9PV 12 V. F9NWV 5 V, 12 V 3-wire (PNP) F9PWV
ompact ylinder: Standard Type Single cting, Single Rod, Spring Return/Extend Series QS ø, ø, ø, ø How to Order QS S QS S FWV S uilt-in magnet Mounting style Through-hole/oth ends tapped common (Standard)
More informationAir Slide Table. ø8, ø12, ø16, ø20, ø25. Linear guide table provides long stroke. Table rigidity is constant throughout entire stroke.
ir Slide Table Series MX ø, ø2, ø, ø2, ø2 inear guide table provides long stroke. Table rigidity is constant throughout entire stroke. ong stroke (Max. mm) inear guide provides long stroke, and it obtains
More informationLow Profile Slide Table Series MXF ø8, ø12, ø16, ø20
Low Profile Slide Table Series XF ø, ø, ø1, ø Low-profile and compact type, air slide table with the construction of guide and cylinder aligned in parallel. eat appearance Protecting stopper section with
More informationSuper-Mini Complete with Easy-to-Use Functions. Guided Cylinder. STM Series GUIDED CYLINDER STM SERIES CC-884A 1
Super-Mini Complete with Easy-to-Use Functions Guided Cylinder GUIDED CYLINDER STM SERIES CC-884A 1 Super-Mini Complete with Super-mini Guided Cylinder (ø6, ø10) with free installation and wide variations
More informationLinear slide cylinder Double acting single rod type. Bore size: 4.5, 6, 8. Descriptions Bore size mm
Linear slide cylinder Double acting single rod type LCM Series Bore size:.5, 6, 8 JIS symbol Specifications Descriptions LCM Bore size mm.5 6 8 Actuation Double acting Working fluid Compressed air Max.
More informationCylinder with Lock CNA. ø40, ø50, ø63, ø80, ø100 Suitable for intermediate stops, emergency stops and drop prevention
ylinder with Lock Series ø, ø, ø, ø, ø Suitable for intermediate stops, emergency stops and drop prevention Simple construction force magnifying mechanism is employed based on the wedge effect of the taper
More informationISO Standard Hydraulic Cylinder
ISO Standard ydraulic ylinder Series S/SG Series S Q N Nominal pressure: S Pa ore size :,,,, Related quipment Series SG Nominal pressure: - Pa ore size : 3,,,,, 51 ISO Standard ydraulic ylinder Series
More informationWith Auto Switch/Double Acting Type, Single Acting Type. Bore Size (mm) : ф12, ф16, ф20, ф25, ф32, ф40, ф50, ф63, ф80, ф100. Symbol.
With Auto witch/double Acting Type, ingle Acting Type Bore ize : ф, ф16,,,,,,, ф, ф PA AVIN DIN IT WIT BOR IZ AUTO WIT APAB YINDR FOR PIA APPIATION MANUFATURIN RTIFID TO IO 91&9 TANDARD ymbol Double Acting
More informationCJ1. Air Cylinder. Double Acting: ø4/single Acting, Spring Return: ø2.5, ø4 CJ1B 4 5 U4. How to Order/Double Acting
1 Air Cylinder Double Acting: ø/ingle Acting, pring Return: ø., ø eries Variations tandard eries Double acting ingle acting style B pring return B U mm For single acting type, refer to pages 6-- to.. How
More information4 Port Solenoid Valve
Port Solenoid Valve Rubber Seal Direct Operated Poppet Type Unprecedented high speed, with stable response times ON: ms, OFF: ms, Dispersion accuracy ±1 ms ( at a supply pressure of 0. MPa) (Use clean
More informationAir Slide Table Series MXP
ir Slide Table Series XP ø, ø, ø, ø, ø1 X XU XS X XF X X XP XY TS - -X Individual -X 19 igh rigidity, igh precision Cylinder is built into the rail of the linear guide. aterial of body and guide block
More informationFree Mount Cylinder. Series CU. A space saving air cylinder with multiple surfaces for mounting. The series consist of an array of cylinders.
Mounting Axial mounting (Body tapped) Free Mount Cylinder eries CU Double Acting ingle Rod/Double Rod ingle Acting pring Return/Extend, Non-rotating Rod ø, ø, ø1, ø, ø, ø A space saving air cylinder with
More informationSeries Basic Type. ø10, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. Series MY1B
MY Series asic Type ø, ø, ø, ø, ø, ø, ø, ø, ø, ø0 Series MY earing Minimizing the unit size (dimensions) and combination with other guides is possible. efore Operating Series MY Maximum llowable Moment/Maximum
More informationHow to Order 1 T Z A. r Pressure range. 05 Pressure range 0 to 0.5 MPa 10 Pressure range 0 to 1 MPa 16 Pressure range 0 to 1.6 MPa
oolant Valve Series S External pilot solenoid S ir operated S How to Order 0 0 Y 0 0 T Z q w e r t y u i o!0!!!!! q Series S00 S00 S00 w Valve type ormally closed ormally open e Seal material R FKM r Pressure
More informationLinear guide table provides long stroke. Table rigidity is constant throughout entire stroke. Table for mounting of workpiece
ir Slide Table MX Series ø, ø2, ø, ø, ø2 RoS inear guide table provides long stroke. Table rigidity is constant throughout entire stroke. ong stroke (Max. 00 mm) inear guide provides long stroke, and it
More information4 Port Solenoid Valve
Port Solenoid Valve Rubber Seal Direct Operated Poppet Type Unprecedented high speed, with stable response times ON: ms, OFF: ms, Dispersion accuracy ±1 ms ( at a supply pressure of 0. MPa) (Use clean
More informationGuide with rated load approx. 1.5-fold higher incorporated!
Series SCP* U SM Guide with rated load approx..5fold higher incorporated! Workpiece installation on two faces High repetition accuracy Outstanding repetition accuracy attained with linear guide Single
More informationMHL2. Series 11- ø10, ø16, ø20, ø25. Parallel Type Wide Opening Air Gripper. How to Order. Model/Stroke. Clean series 11 Vacuum suction type
eries ML2 ø, ø, ø, ø, ø, ø Parallel Type Wide pening ir ripper ow to rder lean series Vacuum suction type ML 2 22 ML 2 MN MN Wide opening Number of fingers 2 2 fingers ore size mm mm mm mm mm mm opper,
More informationGUIDED CYLINDER STG SERIES
New Products GUIDED CYLINDER STG SERIES High precision High rigidity Ecological CC-7A New eco-friendly Guided cylinder STG Series ( to ) - Remove toxic substances and protect the environment by preventing
More informationAir Slide Table. ø8, ø12, ø16, ø20, ø25. Linear guide table provides long stroke. Table rigidity is constant throughout entire stroke.
ir Slide Table Series MX ø, ø2, ø, ø2, ø2 inear guide table provides long stroke. Table rigidity is constant throughout entire stroke. ong stroke (Max. mm) inear guide provides long stroke, and it obtains
More informationSeries RSH/RS1H. To stop pallets gently. Heavy Duty Stopper Cylinder. Stopper cylinder with built-in shock absorber. ø20, ø32 ø50, ø63, ø80
1 eavy Duty Stopper Cylinder Series RS/RS1 ø, ø ø, ø, ø To stop pallets gently CX CY RC RS A MI S C G5-S Stopper cylinder with built-in shock absorber - -9-1 2 eavy Duty Stopper Cylinder Series RS/RS1
More informationRound Type Hydraulic Cylinder
Round Type ydraulic Cylinder Series CM CQ Series CM CK C CM CS C2 C ominal pressure: 3. MPa ore size :,,, 233 3. MPa Round Type ydraulic Cylinder Series C M ø, ø, ø, ø With uto Switch ow to Order CM L
More informationVNA Application example. 3-port dual pressure, N.C. type SGH. Nozzle SGH. Coolant pump
igh Pressure oolant Valve eries Pa/ orresponding to high speed grinding and long drilling processes oolant valve for high pressure coolant liquid (up to Pa/) that is ideal for lubrication, dust blowing
More informationAir Cylinder. Single rod 2.5. Single rod Spring return. How to Order/Double Acting. Applicable tubing. Symbol Tube material Polyurethane Soft nylon
Air Cylinder Double Acting: ø/ingle Acting pring Return: ø2., ø Variations eries tandard B Basic mm Double acting ingle acting ingle rod ingle rod pring return 2. tandard stroke,, 1,,,, 1, How to Order/Double
More informationAir Cylinder: Standard Type Double Acting, Double Rod. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order. Bore size
Air Cylinder: tandard eries CG1W,,,,,,, 0 How to Order auto switch auto switch CG1W L N 0 With auto switch CDG1W L N 0 HW N A uilt-in magnet Double acting, double rod type L U Mounting style asic style
More informationDesign & Selection. Installation & Adjustment
U SM Series WRNING This product must not be used submerged in water, oil or powder, or where coolant, coolant fluid or swarf, etc., may come in contact. lways incorporate an interlock in the control circuit
More informationCJ2. Cushion. Rubber bumper (Standard) Air cushion (except ø6) Cylinder stroke (mm) Built-in magnet Nil. Action. Double acting Single rod +1.
eries -/- / CJ2 ir cylinder / ø, ø, ø ow to Order Clean eries Vacuum suction type Cushion Rubber bumper (tandard) ir cushion (except ø) - C D J 2 L - R 7B 21 - C D J 2 L - R 7B Copper, fluorine and silicon-
More informationRod end male thread. With rubber bumper 056(9/16") 075(3/4") 106(1 1/16") 150(1 1/2") 250(2 1/2") 300(3")
T.ID0-1 New ompact ylinder Series NQ8 ore size: 06(9/16 ),(/ ),106(1 1/16 ),(1 1/ ) 00( ),0( 1/ ),00( ),00( ) Now available in 00 ( ) and 00 ( ) bore sizes Standard type ctuation Style uilt-in magnet Rod
More informationL & S Series Linear Slides
& S Series inear Slides asic Selection S Series (short) single bearing block design, short overall length. (Photo this page) Series (long) double bearing block design, increased bearing support. (Photo
More informationHow to Order. Standard stroke (mm) ø10 15, 30, 45, 60
ingle Acting, ingle Rod, pring Return/Extend eries K ø, ø pring extend pring return B L D Without auto switch With auto switch mm mm Basic Axial foot Rod side flange Double clevis K L CDJ2K L How to Order
More informationVacuum Pad: Ball Joint Type
Vacuum Pad: all oint Type / eries Pad iameter: ø, ø1, ø, ø,,, ø, ø0 all joint type ideal for adsorption on a slanted work surfaces acaces all joint type ideal for adsorption on a slanted work surfaces
More informationSeries MBB ø32, ø40, ø50, ø63, ø80, ø100
Air Cylinder/End ock Series ø, ø, ø, ø, ø, ø ow to Order Standard ith auto switch MD A F G C D T uilt-in magnet Mounting asic/ithout bracket Axial foot Front flange Rear flange Single clevis Double clevis
More informationCompact Cylinder. ISO Standard (21287) C55 Series. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. RoHS C85 C75 C96 C96Y C96K C55
55 96Y 96K 96 P96K P96 75R 75K-S/T 75K 75-S/T 75W 75 85R 85K-S/T 85K 85-S/T 85W 85 ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 Related ade to uto Products Order Switch ompact ylinder 55 Series ISO Standard
More informationSeries MXS ø6, ø8, ø12, ø16, ø20, ø25
ork table and air cylinder are integrated compactly. ir slide table is ideal for precise assembly. CL Repeatability of work mounting lush mountable auto switches n installed auto switch in the housing
More information3 million cycles. High Pressure Coolant Valve. SGH Series W (24 VDC) (With light/surge voltage suppressor: 0.58 W)
igh Pressure oolant Valve eries Pa/ orresponding to high speed grinding and long drilling processes oolant valve for high pressure coolant liquid (up to Pa/) that is ideal for lubrication, dust blowing
More informationAir Cylinder. ø6, ø10, ø16. Easy installation. Reduced piston rod deflection
ir Cylinder eries ø, ø, ø Improved wear resistance The bearing portions of the rod cover and the clevis have been improved in wear resistance to ensure the longevity of the cylinder. eries Variations tandard
More informationMechanical power cylinder
Attaining thrust equivalent to a hydraulic cylinder -- with air pressure alone! New product Mechanical power cylinder MCP Series Mechanical power cylinder MCP Series CC-958A 1 Realize high thrust at any
More informationNAAMS Standards Compliant Power Clamp Cylinder ø50, ø63
NORMTON NMS Standards ompliant Power lamp ylinder ø5, ø6 Weight reduced by up to 8% luminum body with greatly reduced weight Suitable for robot material handling ore size KZ2N a New KZN-X2742 Reduction
More informationMiniature Guide Rod Cylinder ±0.1. Mounting from 2 directions
Miniature Guide Rod Cylinder Series Non-rotating accuracy : Height ±0.1 Mounting from 2 directions idth Overall length Two auto switches can be mounted even for mm strokes Integral wiring/piping to one
More information3 Position Cylinder. RZQ Series. Provides intermediate stop mechanism. ø32, ø40, ø50, ø63. 2-stage stroke enabled with a small increase in length
Position ylinder Series ø, ø, ø, ø Provides intermediate stop mechanism 2-stage stroke enabled with a small increase in length Overall length of cylinder tube DQ2 Full stroke First-stage stroke dditional
More informationMini Free Mount Cylinder
Mini Free Mount Cylinder Series ø, ø, ø, ø, ø, ø1, ø Series 1 ction Stroke 1 2 0 0 0 Clean uto switch series None Rod end Male threaded Without thread Solid state switch D-F D-M9 D-M9 W Female threaded
More informationSeries MHK2. Wedge Cam Operation Slide Guide Air Gripper (2 Finger)
Wedge Cam Operation lide Guide Air Gripper (2 inger) ø2, ø, ø2, ø2 oad Resistant, Dust Cover for Adverse Environments 2 types of finger materials types of dust cover materials tandard: Carbon steel Optional:
More informationCompact Hydraulic Cylinder
ompact Hydraulic ylinder Series HQ HQ Series HQ HK HN HM HS H2 H Nominal pressure:. MPa ore size :,,,,,, . MPa ompact Hydraulic ylinder Double cting/single Rod Series H Q ø, ø, ø, ø, ø, ø, ø With uto Switch
More informationHEP Series. Specifications. Switch specifications. Bearing parallel hand Double acting/single acting. Operational stroke length: 24, 36, 40, 50, 60mm
FH0 G G B FH0 G S F J H2 LB2 N/ S/F Specifications Descriptions Size Cylinder bore size mm ctuation Working fluid Max. working pressure MPa Min. working pressure MPa mbient temperature C Port size Operational
More informationDual Rod Cylinder: Double Rod Type. How to Order. Load voltage Auto switch model Perpendicular In-line 3-wire (NPN equivalent) Y7NWV Y7NW 5 V, 12 V
Dual Rod Cylinder: Double Rod Type eries CXW ø, ø, ø, ø, ø2, ø32 CX W L How to Order 0 Y7W M L Double rod type earing type lide bearing all bushing bearing ore size/troke ore size,,,,,,,,,,,,,,, 2, 32,
More informationSeries CQS. Compact Cylinder. Square body shape gives you flexibility for machine design
ompact ylinder Series QS ø, ø, ø, ø Ideal for machine designs with small space requirements The - and -M auto switches will not protrude from switch mounting groove. Square body shape gives you flexibility
More informationMAGNET TYPE RODLESS CYLINDERS SERIES CONTENTS
CD drawing data catalog is available. CTUTORS GENERL CTLOG MGNET TYPE RODLESS CYLINDERS SERIES CONTENTS Features 59 MRC Series Specifications 6 Order Codes 6 Inner Construction, Major Parts and Materials
More informationHFP Series. Specifications. Switch specifications. Wide parallel hand Double acting. Operational stroke length: 20, 30, 40, 60mm.
FH0 G B FH0 G A S F J H2 N/ S/F Specifications Size Cylinder bore size mm Actuation Working fluid Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational stroke
More informationMechanical Style Pressure Switch. Specifications
or details about certified products conforming to international standards, visit us at www.smcworld.com. Mechanical Style Pressure Switch Series IS1000 Long service life: 5 million cycles IS1000-01 IS1000-01-X202
More informationGENERAL PURPOSE VALVE AB31 AB41 AB42 SERIES Discrete valve. Direct acting poppet structure Port size : Rc1/8, Rc1/4, Rc3/8, Rc1/2.
Series port direct acting solenoid valve : Open when energized, close when energized NRL PURPOS VLV SRIS iscrete valve irect acting poppet structure Port size : Rc/, Rc/, Rc/, Rc/ JIS symbol / (normally
More information10%lighter. 1.7 kg. 1.9 kg. Air Cylinder. New. Weight. Reduced weight by changing the shape of the rod cover and head cover. Series MB1 CAT.
ir ylinder ø32, ø40, ø50, ø63, ø80, ø100, ø125 New RoS Weight (ø50-100 stroke) 10%lighter Existing model 1.9 kg New Series M1 1.7 kg Reduced weight by changing the shape of the rod cover and head cover.
More informationNew cylinder body allows small auto switches to be mounted on 4 surfaces.
Toggle Type Air Gripper ø32, ø4, ø5, ø63 New cylinder body allows small auto switches to be mounted on 4 surfaces. RoH Auto switch mounting rail removed. A round slot for mounting small auto switches is
More informationSeries NCM. Air Cylinder. Stainless Steel Body Cylinders 7/16", 9/16", 3/4", 7/8", 1-1/16", 1-1/4", 1-1/2", 2" Bore
CT.ID2-2 ir Cylinder Series CM Stainless Steel ody Cylinders 7/16", 9/16", 3/4", 7/8", 1-1/16", 1-1/4", 1-1/2", 2" ore ow available in 7/16" and 9/16" bore Double Rod/Double End Mounting on-rotating Rod
More information3 Position Cylinder. ø32, ø40, ø50, ø63 RZQ CDQ2. Bore size (mm)
Position ylinder Series ø, ø, ø, ø Provides intermediate stop mechanism 2-stage stroke enabled with a small increase in length Overall length of cylinder tube First-stage stroke Full stroke dditional cylinder
More informationCompact Slide. Series MXH ø6, ø10, ø16, ø20
Compact Slide Series ø, ø, ø, ø The use of an endless track linear guide produces a table cylinder having excellent rigidity, linearity and non-rotating accuracy. Endless track linear guide Series Variations
More informationROD SLIDERS INDEX ACTUATORS GENERAL CATALOG. Characteristics 779. Handling Instructions, and Precautions 783
Presenting our CAD drawing data catalog ACTUATORS GENERAL CATALOG ROD SLIDERS INDEX Characteristics 779 Handling Instructions, and Precautions 783 Standard Cylinders Specifications 785 Order 78 Dimensions
More informationFree Mount Cylinder. Series. Series CU CAT.EUS20-95 B -UK. Space-saving. Auto Switch Capable P. 4, 23, 37 P. 45 P. 43
CAT.EUS- B -UK Free Mount Cylinder A space-saving air cylinder with multiple surfaces capable of direct mounting. Offered in many variations. Space-saving The multiple surface direct mounted rectangular
More informationRound Type Hydraulic Cylinder
Round Type ydraulic Cylinder CM Series CQ CK C CM CS C C D- CM Series ominal pressure: 3. MPa ore size :,,, 3 3. MPa Round Type ydraulic Cylinder CM Series ø, ø, ø, ø pplicable uto Switches/Refer to pages
More informationSmall Bore Hydraulic Cylinder
Small ore ydraulic Cylinder CN Series CQ CK CN CM CS C C D- CN Series Nominal pressure: MPa ore size :,,, Stainless Steel Tube Small ore ydraulic Cylinder for MPa CN Series ø, ø, ø, ø Equipped with cushion
More informationSeries M Solid state to -56/Z76-59/Y59-5P/Y7P -J59/Y59-59/Y7N Surge absorber (+) Reverse flow prevent diode ( ) (+) ( ) (+) ( ) (+) (+) ( )
asic iring Solid state 3 wire NPN (hen power source for and load is not common.) Sink input specifications 3-wire NPN Switch 3-wire N connection for NPN output (using relays) Series M uto Switch onnections
More information15% lighter. Air Cylinder. New. New. 1.31kg. Series CA2 CAT.ES20-222B. Reduced weight by changing the shape of the rod cover and head cover.
ir ylinder ø40, ø50, ø63, ø80, ø100 Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to ew RoS (ø63-50 stroke) 15% lighter 1.31kg ew 1.54 kg Existing model Easy
More informationDiscrete air operated 2 port valve (compact cylinder valve) NC (normally closed) type
N Series Discrete air operated port valve (compact cylinder valve) N* Series N (normally closed) type, NO (normally open) type, double acting type Port size: Rc/, Rc/ Working fluid: air, water, gas JIS
More informationSine Cylinder. Series REC. ø20, ø25, ø32, ø40 REA REB REC C Y C X MQ RHC RZQ. Sine cylinder. Individual. Velocity curve. Speed. Conventional cylinder
Sine Cylinder Series,,, llows high speed transfer of work with dramatically reduced shock/impact. Velocity curve RE RE Speed Time Sine cylinder Conventional cylinder 3 Sine Cylinder Series,,, llows rapid
More informationCompact Guide Cylinder
Compact Guide Cylinder Series ø, ø, ø, ø, ø, ø, ø, ø, ø, ø ir cylinder with guide integrated that has achieved anti-lateral load and high non-rotating accuracy. Space-saving cylinder. Suitable as stoppers
More informationSLIDE TABLES CONTENTS
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG SLIDE TALES CONTENTS Features 979 Safety Precautions, Handling Instructions and Precautions 981 Specifications 985 Order Codes 986 Inner
More informationLow Friction Cylinders
ow riction ylinders Series Metal Seal Type P.112 Series QT Standard type Q ateral load resisting type (uilt-in ball bushing) ompact ow riction ylinder Series Q Operating pressure range (MPa) 0.00 to 0.
More informationLight weight clamp cylinder CAC-N32/40 Series Light weight position locking clamp cylinder UCAC-N32/40 Series
Helping lighten welding jigs and other tools Light weight clamp cylinder CAC-N32/40 Series Light weight position locking clamp cylinder UCAC-N32/40 Series New product Light weight clamp cylinder CAC-N
More informationSeries VC Direct Operated 2 Port Solenoid Valve for Oil. Series VCL VX VN VQ VDW VC LV PA
Series V irect Operated Port Solenoid Valve for Oil Series V VX VN V VW V V P.-9 Multipurpose Valve for Oil irect Operated Port Solenoid Valve for Oil Series V Kerosene, uel oil class (fuel oil ), Silicone
More informationFJ Series General Purpose Hydraulic Cylinder
J SRS YRAU YR J Series eneral Purpose ydraulic ylinder eatures φ 30 to 0 1000ST 7, 14Pa qeneral purpose J series hydraulic cylinders have a high level of compatibility and interchangeability, plus very
More information