Automation systems Drive solutions Controls Inverters Motors Gearboxes Engineering Tools

Transcription

1 L-fore atalogue Autoation systes Drive solutions Controls Inverters Motors Gearboxes Engineering Tools Motors: MD three-phase AC otors Gearboxes: GFL shaft-ounted helial gearboxes

2

3 Contents of the L-fore atalogue About Lenze Lenze akes any things easy for you. A atter of priniple: the right produts for every appliation. L-fore produt portfolio Autoation systes Controller-based Autoation Drive-based autoation Drive solutions HighLine tasks StateLine tasks BaseLine tasks Controls Cabinet Controller Panel Controller ' Controller 3200 C I/O syste 1000 Controller p500 Monitor Panel Inverters Deentralised Cabinet Inverter Drives 8400 prote Inverter Drives 8400 ote Inverter Drives SMV IP65 Servo Drives 9400 HighLine Inverter Drives 8400 TopLine Servo Inverters i700 Inverter Drives 8400 HighLine Inverter Drives 8400 StateLine Inverter Drives SMV IP31 Inverter Drives 8400 BaseLine Motors Servo otors Three-phase AC otors MCS synhronous servo otors MD KS synhronous servo otors MQA asynhronous servo otors MCA asynhronous servo otors MF three-phase AC otors MH three-phase AC otors MD three-phase AC otors 300 Lenze Sart Motor MD/MH basi three-phase AC otors Gearboxes Axial gearbox Right-angle gearbox Motor data g700-p planetary gearbox MPR/MPG planetary gearboxes g500-h helial gearbox GST helial gearboxes g500-s shaft-ounted helial gearbox GFL shaft-ounted helial gearboxes g500-b bevel gearbox GKR bevel gearboxes GKS helial-bevel gearboxes GSS helial-wor gearboxes Assignent see above Engineering Tools Navigator Drive Solution Designer Drive Solution Catalogue Engineer PLC Designer VisiWinNET EASY Starter Seleted portfolio Additional portfolio

4 Lenze akes any things easy for you. With our otivated and oitted approah, we work together with you to reate the best possible solution and set your ideas in otion - whether you are looking to optiise an existing ahine or develop a new one. We always strive to ake things easy and seek perfetion therein. This is anhored in our thinking, in our servies and in every detail of our produts. It's as easy as that! 1 Developing ideas Are you looking to build the best ahine possible and already have soe initial ideas? Then get these down on paper together with us, starting with sall innovative details and strething all the way to opletely new ahines. Working together, we will develop an intelligent and sustainable onept that is perfetly aligned with your speifi requireents. 2 Drafting onepts We see weloe hallenges in your ahine tasks, supporting you with our oprehensive expertise and providing valuable ipetus for your innovations. We take a holisti view of the individual otion and ontrol fun- tions here and draw up onsistent, end-toend drive and autoation solutions for you - keeping everything as easy as possible and as extensive as neessary. 3 Ipleenting solutions Our easy forula for satisfied ustoers is to establish an ative partnership with fast deision-aking proesses and an individu- ally tailored offer. We have been using this siple priniple to eet the ever ore spe- ialised ustoer requireents in the field of ehanial engineering for any years. 4 Manufaturing ahines Produtivity, reliability and new perforane peaks on a daily basis these are our key suess fators for your ahine. After deliv- ery, we offer you leverly devised servie onepts to ensure ontinued safe operation. The priary fous here is on tehnial sup- port, based on the exellent appliation ex- pertise of our highly-skilled and knowledgeable after-sales tea. Funtional diversity in perfet harony: as one of the few full-range providers in the arket, we an provide you with preisely those produts that you atually need for any ahine task no ore and no less. Our L- fore produt portfolio, a onsistent platfor for ipleenting drive and autoation tasks, is invaluable in this regard. 5 Ensuring produtivity

5 A atter of priniple: the right produts for every appliation. Lenze's extensive L-fore produt portfolio follows a very siple priniple. The funtions of our finely saled produts are assigned to the three lines Base-Line, State- Line or High-Line. But what does this ean for you? It allows you to quikly reognise whih produts represent the best solution for your own speifi requireents. Powerful produts with a ajor ipat: Easy handling High quality and durability Reliable tehnologies in tune with the latest developents Lenze produts undergo the ost stringent testing in our own laboratory. This allows us to ensure that you will reeive onsistently high quality and a long servie life. In addition to this, five logistis entres ensure that the Lenze produts you selet are available for quik delivery anywhere aross the globe. It's as easy as that!

6 L-fore produt portfolio Controls Engineering Tools

7 L-fore produt portfolio Inverters

8 L-fore produt portfolio Motors

9 L-fore produt portfolio Gearboxes

10

11 Gearboxes GFL shaft-ounted helial gearboxes 0.12 to 45 kw

12

13 GFL shaft-ounted helial gearboxes Contents General inforation Tehnial data Aessories List of abbreviations Produt key Produt inforation Funtions and features Diensioning Notes on ordering Ordering details heklist Perissible radial and axial fores at output Output baklash in angular inutes Moents of inertia Weights Seletion tables Diensions Hollow shaft with shrink dis Mounting set for hollow shaft irlip: Proposed design for auxiliary tools Foot ounting in position 3 Foot ounting in position 4 Rubber buffer for torque plate Ventilations

14 GFL shaft-ounted helial gearboxes General inforation List of abbreviations η =1 f N F ax,ax F rad,ax H ax i J M 2 n 2 n N P N S hü T opr,ax T opr,in U N, Δ U N, Y [Hz] [N] [N] [] [kg²] [N] [r/in] [r/in] [kw] [1/h] [ C] [ C] [V] [V] Effiieny Load apaity Rated frequeny Max. axial fore Max. radial fore Site altitude Ratio Moent of inertia Mass Output torque Output speed Rated speed Rated power Transition operating frequeny Max. abient operating teperature Min. abient operating teperature Rated voltage Rated voltage CE CSA DIN EMC EN IEC IM IP NEMA UL UR VDE CCC GOST URus UkrSEPRO Counauté Européenne Canadian Standards Assoiation Deutshes Institut für Norung e.v. Eletroagneti opatibility European standard International Eletrotehnial Coission International Mounting Code International Protetion Code National Eletrial Manufaturers Assoiation Underwriters Laboratory Listed Produt Underwriters Laboratory Reognized Produt Verband deutsher Elektrotehniker (Assoiation of Geran Eletrial Engineers) China Copulsory Certifiate Certifiate for Russian Federation Cobined ertifiation arks of UL for the USA and Canada Certifiate for Ukraine - 4

15 GFL shaft-ounted helial gearboxes General inforation Produt key - 5

16 GFL shaft-ounted helial gearboxes General inforation Produt key Mounting position (A to F) and position of syste bloks (1 to 6) Hollow shaft: 0 Solid shaft: 6 Hollow shaft with shrink dis: 1, 6 Without foot: 0 Foot: 3, 4 Terinal box / ote: 2, 3, 4, 5 Gearbox designs Basi versions Motor effiieny Surfae and orrosion protetion Lubriant Ventilation Standard effiieny Inreased effiieny (IE2) OKS-G (prier: grey) OKS-S (paint: RAL 7012) CLP 460 (ineral) Oil ontrol plugs for GFL05 to Breather eleents for GFL06 Options Surfae and orrosion protetion Lubriant Shaft sealing rings Ventilation Aessories Naeplate OKS-S (speial paint aording to RAL) OKS-M (speial paint aording to RAL) OKS-L (speial paint aording to RAL) CLP HC 320 (syntheti) CLP HC 220 USDA H1 (syntheti) Driven shaft: Viton Breather eleents for GFL05 Copensation reservoir for GFL09 to -2 in ounting position C Rubber buffer for torque plate Shrink dis over Mounting set for hollow shaft irlip Metal naeplate (supplied loose) Adhesive naeplate (supplied loose) - 6

17 GFL shaft-ounted helial gearboxes General inforation Produt inforation Lenze provides a geared otor onstrution kit, whih overs a wide range of requireents. Nuerous drive-side and output-side options enable preise adaptation of the drive to the speifi appliation. This is the basis for versatile appliations and funtional salability of our gearboxes and geared otors. The odular onept and high power density ake extreely opat sizes possible. Optiised teeth profiles and ground gears ensure low-noise operation and low baklash. The gearboxes are of opat and hene spae-saving onstrution. Designs 2-stage and 3-stage gearboxes Hollow shaft with keyway or shrink dis Solid shaft with keyway Foot or flange ounting Torque plate, inluding rubber buffer With MD three-phase AC otors (effiieny lasses IE1) power range kw Copat and powerful In obination with three-phase AC otors, our shaft-ounted helial gearboxes for a opat and effetive drive unit. The low level of baklash of the gear teeth ensures highest preision. In addition, they an also distribute the power output and torque via an output shaft on both sides. The gearboxes are available in 2- and 3- stage versions with a torque of up to 11,615 N and a ratio of up to i=856. Inverters for otor-proxiity installation The Drive Pakage with deentralised Inverter Drives 8400 ote overs a power range up to 7.5 kw. Shaft-ounted helial geared otor GFL07-2M HCR

18 GFL shaft-ounted helial gearboxes General inforation Funtions and features Gearbox type Housing Design Material Solid shaft Design Tolerane Material Hollow shaft Design Tolerane Material Toothed part Design Material Shaft-hub joint Shaft sealing rings Design Material Bearing Design Shierstoffe Standard Quantities Mehanial effiieny 1-stage gearboxes [η =1 ] 2-stage gearboxes [η =1 ] 3-stage gearboxes [η =1 ] 4-stage gearboxes [η =1 ] Notes GFL Cuboid Aluiniu / ast iron with keyway to DIN 6885 k6 (d 50 ) 6 (d > 50 ) Tepered steel C45 or 42CrMo4 H: with keyway S: sooth Bore H7 Tepered steel C45 Ground tooth flanks Optiised tooth flank geoetry Case-hardened steel 1st stage/prestage/helial (bevel) gearbox: Frition-type onnetion Output stage (= 2nd, 3rd or 4th stage): Frition-type or positive-fit onnetion With dust lip NB / FP Ball bearing / tapered-roller bearing depending on size and design DIN orresponding to ounting position (see operating instrutions) 7 5-8

19 GFL shaft-ounted helial gearboxes General inforation Funtions and features Lubriants Lenze gearboxes and geared otors are ready for operation on delivery and are filled with lubriants speifi to both the drive and the design. The ounting position and design speified in the order are key fators in hoosing the volue of lubriant. The lubriants listed in the lubriant table are approved for use in Lenze drives. Lubriant table Mode Abient teperature [ C] Speifiation Note Changing interval Fuhs Klüber Shell CLP Mineral based oil with additives 000 operating hours not later than after three years (oil teperature 70 to 80 C) Fuhs Renolin CLP 460 Klüberoil GEM1-460 N Shell Oala S2 G 460 CLP HC 320 CLP HC 220 USDA H Syntheti-based oil (syntheti hydroarbon / poly-alpha-olefin oil) For food proessing industry operating hours 000 operating hours not later than after three years (oil not later than after three years (oil teperature 70 to 80 C) teperature 70 to 80 C) Fuhs Renolin breer & leguil Unisyn CLP 320 Cassida Fluid GL 220 Klübersynth Klüberoil GEM4-320 N 4 UH1-220 N Shell Oala S4 GX HD 320 ƒ Please ontat your Lenze sales offie if you are operating at abient teperatures in areas up to< -20 C bzw. > or up to +40 C. - 9

20 GFL shaft-ounted helial gearboxes General inforation Funtions and features Surfae and orrosion protetion For optiu protetion of geared otors against abient onditions, the surfae and orrosion protetion syste (OKS) offers tailor-ade solutions. Various surfae oatings obined with other protetive easures ensure that the geared otors operate reliably even at high air huidity, in outdoor installations or in the presene of atospheri ipurities. Any olour fro the RAL Classi olletion an be hosen for the top oat. The geared otors are also available unpainted (no surfae and orrosion protetion). Surfae and orrosion protetion syste OKS-G (pried) OKS-S (sall) OKS-M (ediu) OKS-L (high) Appliations Catalogue text Measures Catalogue text 2K PUR priing oat (grey) Zin-oated srews Dependent on subsequent Rust-free breather eleents top oat applied Optional easures Stainless steel naeplate Surfae oating as per orrosivity ategory C1 (in line with EN Standard appliations 2) Internal installation in heated Zin-oated srews buildings Rust-free breather eleents Air huidity up to 90% Optional easures Stainless steel naeplate Surfae oating as per orrosivity ategory C2 (in line with EN ) Internal installation in nonheated buildings Zin-oated srews Rust-free breather eleents Covered, proteted external Optional easures installation Stainless steel shaft Air huidity up to 95% Stainless steel naeplate Rust-free shrink dis (on request) Surfae oating as per orrosivity ategory C3 (in line with EN ) Blower over and B end shield additionally pried Cable glands with gaskets Corrosion-resistant brake with over ring, stainless frition plate, and hroe-plated arature plate (on request) All srews/srew plugs zin-oated External installation Stainless breather eleents Air huidity above 95% Threaded holes that are not used are losed by eans of plasti plugs Cheial industry plants Optional easures Food industry Sealed reesses on otor (on request) Stainless steel shaft Stainless steel naeplate Rust-free shrink dis (on request) Additional priing oat on ast iron fan Oil expansion tank and torque plates painted separately and supplied loose - 10

21 GFL shaft-ounted helial gearboxes General inforation Funtions and features Struture of surfae oating Surfae and orrosion protetion syste Corrosivity ategory DIN EN ISO Surfae oating Struture Colour Without OKS (unoated) OKS-G (pried) OKS-S (sall) OKS-M (ediu) OKS-L (high) C1 C2 C3 Dipping pried gearbox Dipping pried gearbox 2K PUR priing oat Dipping pried gearbox 2K-PUR top oat Dipping pried gearbox 2K PUR priing oat 2K-PUR top oat Dipping pried gearbox 2K PUR priing oat 2K-PUR top oat Standard: RAL 7012 Optional: RAL Classi Standard: RAL 7012 Optional: RAL Classi Standard: RAL 7012 Optional: RAL Classi - 11

22 GFL shaft-ounted helial gearboxes General inforation Funtions and features Ventilation Non-ventilated gearboxes No ventilation is required for the GFL04 gearbox. Gearboxes that ay optionally be equipped with ventilation Speial easures are not usually required when using the GFL05 gearbox. In borderline ases, e.g. at input speeds > 2000 rp, we reoend the use of breather eleents, whih we an supply if required. Ventilated gearboxes The gearboxes GFL06 to are supplied with breather eleents as standard. Speial easures for ounting position C (otor on top) We reoend that an oil opensation reservoir is always used with gearbox sizes G 09 to in this ounting position. This reservoir an be purhased as an option. For illustrations and easures, please refer to the Aessories hapter. This is not required at higher ratios or low input speeds. Please ontat Lenze for onfiration in this ase. - 12

23 GFL shaft-ounted helial gearboxes General inforation Diensioning General inforation about the data provided in this atalogue Powers, torques and speeds The powers, torques and speeds speified in this atalogue are rounded values and are valid under the following onditions: Operating tie/day = 8 h (100% OT) Duty lass I for up to 10 swithing operations/h Mounting positions and designs in this atalogue Standard lubriant T ab = 20 C for gearboxes, T ab = 40 C for otors (in aordane with EN 60034) Site altitude < = 1000 asl The seletion tables provide the perissible ehanial powers and torques. For notes on the theral power liit, see hapter drive diensioning. The rated power speified for otors and geared otors applies to operating ode S1 (in aordane with EN 60034). Under different operating onditions, the values obtained ay vary fro those listed here. In the ase of extree operating onditions, please onsult your Lenze sales offie. -

24 GFL shaft-ounted helial gearboxes General inforation Diensioning Theral power liit The theral power liit, defined by the heat balane, liits the perissible gearbox ontinuous power. It ay be less than the ehanial power ratings listed in the seletion tables. The theral power liit is affeted by: the hurning losses in the lubriant. These are deterined by the ounting position and the iruferential speed of the wheels the load and the speed the abient onditions: teperature, air irulation, input or dissipation via shafts and the foundation Please onsult your Lenze sales offie if the following input speeds n 1 are exeeded on a ontinuous basis (ontinuous is defined as ore than 8 h/day): Motor frae size Mounting position A, B, E, F 3000 r/in 3000 r/in 2000 r/in Mounting position C, D 3000 r/in 1500 r/in 1500 r/in if the following input speeds n 1 are exeeded: Motor frae size Mounting position A, B, E, F 4000 r/in 4000 r/in 3000 r/in Mounting position C, D 3000 r/in 2000 r/in 1500 r/in or if you are using the following gearbox type, size and ratio obinations at an input speed of n 1 > 1500 r/in: Gearbox type GFL shaft-ounted helial gearbox Gearbox size 07, 09, 11, Ratio i Possible ways of extending the appliation area syntheti lubriant (option) shaft sealing rings ade fro FP aterial/viton (option) redution in lubriant quantity ooling of the geared otor by eans of air onvetion on the ahine/syste -

25 GFL shaft-ounted helial gearboxes General inforation Diensioning Load apaity and appliation fator Load apaity of gearbox Rated value for the load apaity of Lenze geared otors. is the ratio of the perissible rated torque of the gearbox to the rated torque supplied by the drive oponent (e.g. the built-in Lenze otor). The value of ust always be greater than the value of the appliation fator k alulated for the appliation. Appliation fator k (aording to DIN 3990) Takes into aount the influene of teporally variable loads whih are atually present during the antiipated operating tie of gearboxes and geared otors. k is deterined by: the type of load the load intensity teporal influenes Duty lass I II III Load type Sooth operation, sall or light jolts Uneven operation, average jolts Uneven operation, severe jolts and/or alternating load Appliation fator k - 15

26 GFL shaft-ounted helial gearboxes General inforation Diensioning Torque derating at low otor frequenies Motor size-dependent torque redution, taking into aount the theral response during operation on the inverter. Torque harateristis A = Operation with integral fan and brake B = Operation with integral fan and brake ontrol "Holding urrent redution" You an use the Drive Solution Designer for preise drive diensioning. The Drive Solution Designer helps you to arry out a fast and highquality drive diensioning. The software inludes well-founded and proven knowledge on drive appliations and eletro-ehanial drive oponents. Please ontat your Lenze sales offie. -

27 GFL shaft-ounted helial gearboxes General inforation Diensioning Notes on the seletion tables The seletion tables show the available obinations of gearbox type, nuber of stages, ratio and otor. They are used only to provide basi orientation. The following legend indiates the struture of the seletion tables. - 17

28 GFL shaft-ounted helial gearboxes General inforation Diensioning Notes on the seletion tables Motor voltages The power values and torques indiated in the seletion tables relate to the following otor voltages: 50 Hz : Δ 230 V / Y 400 V 60 Hz : 230 V or 460 V 87 Hz : Δ 400 V Operation at 87 Hz In 87 Hz operation, the three-phase AC otor (whih is designed for a voltage of Δ 230 V / Y 400 V at 50 Hz) is operated on an inverter with 400 V rated voltage in a delta onnetion. It is iportant to note here that the inverter ust be onfigured for 87Hz output. This offers the following advantages over 50 Hz operation: the setting range of the otor is inreased by a fator of 3. the otor an then provide around 3 ties greater output, whih in turn allows a saller and ore affordable otor to be seleted for the appliation. the effiieny of the otor is also iproved. - 18

29 GFL shaft-ounted helial gearboxes General inforation Notes on ordering We want to be sure that you reeive the orret produts in good tie. To allow us to ahieve this we need: your address and your opany data our produt key for the individual produts in this atalogue your delivery date and delivery address Ordering proedure Please use the ordering inforation heklist to ensure that you provide all the ordering inforation required for the various produts. The ordering inforation heklist, the produt key, the basi versions, options, ounting position and position of the syste bloks will be found in the General Produt key setion. A list of Lenze's worldwide sales offies an be found on the Internet:

30 GFL shaft-ounted helial gearboxes General inforation Ordering details heklist - 20

31 GFL shaft-ounted helial gearboxes General inforation Ordering details heklist - 21

32 GFL shaft-ounted helial gearboxes General inforation Ordering details heklist Three-phase AC otors options - 22

33 GFL shaft-ounted helial gearboxes General inforation Ordering details heklist Three-phase AC otors options - 23

34 GFL shaft-ounted helial gearboxes General inforation - 24

35 GFL shaft-ounted helial gearboxes Tehnial data Perissible radial and axial fores at output Perissible radial fore F rad,per = in(f w x f α x F rad,ax ; f w x F rad,ax at n 2 r/in) Perissible axial fore F ax,per = F ax,ax if F rad = 0 If F rad and F ax 0, please ontat your Lenze sales offie. Appliation of fores Effetive diretion fator f α at output shaft Diretion of rotation R Diretion of rotation L - 25

36 GFL shaft-ounted helial gearboxes Tehnial data Perissible radial and axial fores at output Additional load fator f w at output shaft Solid shaft (V ) Solid shaft with flange (V K) Hollow shaft (H ) GFL -2/3 H Size Gearbox n 2 [r/in] Max. radial fore, Hollow shaft F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax [N] [N] [N] [N] [N] [N] [N] [N] [N] [N] GFL GFL GFL GFL GFL GFL GFL Max. axial fore, Hollow shaft F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax [N] [N] [N] [N] [N] [N] [N] [N] [N] [N] GFL GFL GFL GFL GFL GFL GFL ƒ Appliation of fore F rad : at hollow shaft end fae (x = 0) ƒ F ax,ax only valid with F rad = 0 ƒ Neither radial nor axial fores are perissible for the hollow shaft with shrink dis (S ). - 26

37 GFL shaft-ounted helial gearboxes Tehnial data Perissible radial and axial fores at output GFL -2/3 V R Size Gearbox n 2 [r/in] GFL04 GFL05 GFL06 GFL07 F rad,ax [N] F rad,ax [N] F rad,ax [N] Max. radial fore, Solid shaft without flange F rad,ax [N] F rad,ax [N] F rad,ax [N] F rad,ax [N] F rad,ax [N] F rad,ax [N] F rad,ax GFL09 1) GFL11 1) GFL GFL04 GFL05 GFL06 GFL07 F ax,ax [N] F ax,ax [N] F ax,ax [N] Max. axial fore, Solid shaft without flange F ax,ax [N] F ax,ax [N] F ax,ax [N] F ax,ax [N] F ax,ax [N] F ax,ax [N] [N] F ax,ax GFL09 1) GFL11 1) GFL ) Reinfored output shaft bearings are available on request for V R versions. ƒ Appliation of fore F rad : entre of shaft journal (x = l/2) ƒ F ax,ax only valid with F rad = 0 [N]

38 GFL shaft-ounted helial gearboxes Tehnial data Perissible radial and axial fores at output GFL -2/3 V K Size Gearbox n 2 [r/in] Max. radial fore, Solid shaft with flange F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax [N] [N] [N] [N] [N] [N] [N] [N] [N] [N] GFL GFL GFL GFL GFL GFL GFL Max. axial fore, Solid shaft with flange F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax [N] [N] [N] [N] [N] [N] [N] [N] [N] [N] GFL GFL GFL GFL GFL GFL GFL ƒ Appliation of fore F rad : entre of shaft journal (x = l/2) ƒ F ax,ax only valid with F rad = 0-28

39 GFL shaft-ounted helial gearboxes Tehnial data Output baklash in angular inutes ƒ Baklash ϕ depending on ratio i GFL04 to -2 GFL05 to -3-29

40 GFL shaft-ounted helial gearboxes Tehnial data Moents of inertia GFL -2 ƒ Moent of inertia (J) depending on ratio i Gearbox GFL04 Gearbox GFL J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] ƒ ƒ The oents of inertia relate to the drive shaft of the gearbox. The total oent of inertia is alulated by adding the values of the gearbox, otor and aessories. - 30

41 GFL shaft-ounted helial gearboxes Tehnial data Moents of inertia GFL -2 ƒ Moent of inertia (J) depending on ratio i Gearbox GFL06 Gearbox GFL J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] 10 8 J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] ƒ ƒ The oents of inertia relate to the drive shaft of the gearbox. The total oent of inertia is alulated by adding the values of the gearbox, otor and aessories. - 31

42 GFL shaft-ounted helial gearboxes Tehnial data Moents of inertia GFL -2 ƒ Moent of inertia (J) depending on ratio i Gearbox GFL09 Gearbox GFL J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] Gearbox J J J J J J J J J J J J J J J J J J J J J J J [kg²] [kg²] [kg²] [kg²] [kg²] [kg²] [kg²] [kg²] [kg²] [kg²] [kg²] [kg²] [kg²] [kg²] [kg²] [kg²] [kg²] [kg²] [kg²] [kg²] [kg²] [kg²] [kg²] GFL ƒ ƒ The oents of inertia relate to the drive shaft of the gearbox. The total oent of inertia is alulated by adding the values of the gearbox, otor and aessories. - 32

43 GFL shaft-ounted helial gearboxes Tehnial data Moents of inertia GFL -3 ƒ Moent of inertia (J) depending on ratio i Gearbox GFL05 Gearbox GFL J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] Gearbox GFL07 Gearbox GFL J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] 28 9 J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] ƒ ƒ The oents of inertia relate to the drive shaft of the gearbox. The total oent of inertia is alulated by adding the values of the gearbox, otor and aessories. - 33

44 GFL shaft-ounted helial gearboxes Tehnial data Moents of inertia GFL -3 ƒ Moent of inertia (J) depending on ratio i Gearbox GFL11 Gearbox GFL J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] J [kg²] 54 ƒ ƒ The oents of inertia relate to the drive shaft of the gearbox. The total oent of inertia is alulated by adding the values of the gearbox, otor and aessories. - 34

45 GFL shaft-ounted helial gearboxes Tehnial data Weights GFL -2M HCR / HDR GFL04 GFL05 GFL06 GFL07 063C C C C32 063C C11 071C 071C32 071C C33 071C C C GFL04 GFL05 GFL06 GFL07 GFL09 GFL11 GFL 080C C32 080C33 080C C11 090C C C C C C C C GFL06 GFL07 GFL09 GFL11 GFL 112C C C C22 2C C C C C C C C GFL -2M HAR / HBR GFL04 GFL05 GFL06 GFL07 063C C C C32 063C C11 071C 071C C C33 071C C C GFL04 GFL05 GFL06 GFL07 GFL09 GFL11 GFL 080C C32 080C33 080C C11 090C C C C C C C C GFL06 GFL07 GFL09 GFL11 GFL 112C C C C22 2C C C C C C C C ƒ Weights with oil filling for ounting position A; all values are approxiate. The weights relate to the basi version. Bear in ind that additional weights ay be needed, e.g. for otor options. - 35

46 GFL shaft-ounted helial gearboxes Tehnial data Weights GFL -2M HAK GFL04 GFL05 GFL06 GFL07 063C11 063C42 063C12 063C31 063C C C 071C C C33 071C C C C C32 080C33 080C GFL05 GFL06 GFL07 GFL09 GFL11 GFL 090C11 090C C C C C C C C C C GFL07 GFL09 GFL11 GFL 2C C22 2C C C C C C C C GFL -2M HCK GFL04 GFL05 GFL06 GFL07 063C11 063C42 063C12 063C31 063C C C 071C C C33 071C C C C C32 080C33 080C GFL05 GFL06 GFL07 GFL09 GFL11 GFL 090C11 090C C C C C C C C C C GFL07 GFL09 GFL11 GFL 2C C22 2C C C C C C C C ƒ Weights with oil filling for ounting position A; all values are approxiate. The weights relate to the basi version. Bear in ind that additional weights ay be needed, e.g. for otor options. - 36

47 GFL shaft-ounted helial gearboxes Tehnial data Weights GFL -2M VCR / VDR GFL04 GFL05 GFL06 GFL07 063C11 063C42 063C12 063C31 063C C11 071C 071C32 071C C33 071C C C C C32 080C33 080C GFL04 GFL05 GFL06 GFL07 GFL09 GFL11 GFL 090C11 090C C C C C C C C C GFL06 GFL07 GFL09 GFL11 GFL 112C C C22 2C C C C C C C C GFL -2M VAR / VBR GFL04 GFL05 GFL06 GFL07 063C11 063C42 063C12 063C31 063C C C 071C C C33 071C C C C C32 080C33 080C GFL04 GFL05 GFL06 GFL07 GFL09 GFL11 GFL 090C11 090C C C C C C C C C GFL06 GFL07 GFL09 GFL11 GFL 112C C C22 2C C C C C C C C ƒ Weights with oil filling for ounting position A; all values are approxiate. The weights relate to the basi version. Bear in ind that additional weights ay be needed, e.g. for otor options. - 37

48 Weights GFL -2M VAK 080C 080C11 071C33 071C32 071C 071C11 063C42 063C32 063C31 063C12 063C11 071C42 071C GFL GFL GFL06 91 GFL07 112C31 112C22 100C41 100C32 100C31 100C12 090C32 090C31 090C11 080C32 080C31 080C33 080C GFL GFL GFL GFL GFL GFL GFL 225C22 225C12 180C42 180C32 180C12 0C32 0C22 2C22 2C21 112C41 112C32 2C GFL GFL GFL GFL GFL GFL -2M VCK 080C 080C11 071C33 071C32 071C 071C11 063C42 063C32 063C31 063C12 063C11 071C42 071C GFL GFL GFL06 87 GFL07 112C31 112C22 100C41 100C32 100C31 100C12 090C32 090C31 090C11 080C32 080C31 080C33 080C GFL GFL GFL GFL GFL GFL GFL 225C22 225C12 180C42 180C32 180C12 0C32 0C22 2C22 2C21 112C41 112C32 2C GFL GFL GFL GFL GFL ƒ Weights with oil filling for ounting position A; all values are approxiate. The weights relate to the basi version. Bear in ind that additional weights ay be needed, e.g. for otor options GFL shaft-ounted helial gearboxes Tehnial data

49 GFL shaft-ounted helial gearboxes Tehnial data Weights GFL -2M SCR / SDR GFL04 GFL05 GFL06 GFL07 063C11 063C42 063C12 063C31 063C C11 071C 071C C C33 071C C C C C32 080C33 080C GFL04 GFL05 GFL06 GFL07 GFL09 GFL11 GFL 090C11 090C C C C C C C C C GFL06 GFL07 GFL09 GFL11 GFL 112C C C22 2C C C C C C C C GFL -2M SAR / SBR GFL04 GFL05 GFL06 GFL07 063C11 063C42 063C12 063C31 063C C C 071C C C33 071C C C C C32 080C33 080C GFL04 GFL05 GFL06 GFL07 GFL09 GFL11 GFL 090C11 090C C C C C C C C C GFL06 GFL07 GFL09 GFL11 GFL 112C C C22 2C C C C C C C C ƒ Weights with oil filling for ounting position A; all values are approxiate. The weights relate to the basi version. Bear in ind that additional weights ay be needed, e.g. for otor options. - 39

50 GFL shaft-ounted helial gearboxes Tehnial data Weights GFL -2M SAK GFL05 GFL06 GFL07 063C C C 071C C C33 071C C C C C32 080C33 080C C GFL05 GFL06 GFL07 GFL09 GFL11 GFL 090C C C C C C C C C C GFL07 GFL09 GFL11 GFL 2C C22 2C C C C C C C C GFL -2M SCK GFL05 GFL06 GFL07 063C C11 071C 071C C C33 071C C C C C32 080C33 080C C GFL05 GFL06 GFL07 GFL09 GFL11 GFL 090C C C C C C C C C C GFL07 GFL09 GFL11 GFL 2C C22 2C C C C C C C C ƒ Weights with oil filling for ounting position A; all values are approxiate. The weights relate to the basi version. Bear in ind that additional weights ay be needed, e.g. for otor options. - 40

51 GFL shaft-ounted helial gearboxes Tehnial data Weights GFL -3M HCR / HDR GFL05 GFL06 GFL07 GFL09 063C C12 063C C32 063C C11 071C 071C C C33 071C GFL05 GFL06 GFL07 GFL09 GFL11 GFL 080C C C C32 080C33 080C C11 090C C C C C C GFL09 GFL11 GFL 112C C C C C C22 2C C C GFL -3M HAR / HBR GFL05 GFL06 GFL07 GFL09 GFL11 063C11 063C12 063C31 063C C C C 071C C C C C C GFL05 GFL06 GFL07 GFL09 GFL11 GFL 080C C32 080C33 080C C11 090C C C C C C C GFL09 GFL11 GFL 112C C C C C22 2C C C ƒ Weights with oil filling for ounting position A; all values are approxiate. The weights relate to the basi version. Bear in ind that additional weights ay be needed, e.g. for otor options. - 41

52 GFL shaft-ounted helial gearboxes Tehnial data Weights GFL -3M HAK GFL05 GFL06 GFL07 GFL09 GFL11 063C11 063C12 063C31 063C C C C 071C C C C C C GFL05 GFL06 GFL07 GFL09 GFL11 GFL 080C C32 080C33 080C C11 090C C C C C C C GFL09 GFL11 GFL 112C C C C C22 2C C C GFL -3M HCK GFL05 GFL06 GFL07 GFL09 063C C12 063C C32 063C C11 071C 071C C C33 071C GFL05 GFL06 GFL07 GFL09 GFL11 GFL 080C C C C32 080C33 080C C11 090C C C C C C GFL09 GFL11 GFL 112C C C C C C22 2C C22 5 0C ƒ Weights with oil filling for ounting position A; all values are approxiate. The weights relate to the basi version. Bear in ind that additional weights ay be needed, e.g. for otor options. - 42

53 GFL shaft-ounted helial gearboxes Tehnial data Weights GFL -3M VCR / VDR GFL05 GFL06 GFL07 GFL09 063C C C C32 063C C11 071C 071C C C33 071C GFL05 GFL06 GFL07 GFL09 GFL11 GFL 080C C C C32 080C33 080C C11 090C C C C C C GFL09 GFL11 GFL 112C C C C C C22 2C C22 5 0C GFL -3M VAR / VBR GFL05 GFL06 GFL07 GFL09 GFL11 063C11 063C12 063C31 063C C C C 071C C C C C C GFL05 GFL06 GFL07 GFL09 GFL11 GFL 080C C32 080C33 080C C11 090C C C C C C C GFL09 GFL11 GFL 112C C C C C22 2C C C ƒ Weights with oil filling for ounting position A; all values are approxiate. The weights relate to the basi version. Bear in ind that additional weights ay be needed, e.g. for otor options. - 43

54 GFL shaft-ounted helial gearboxes Tehnial data Weights GFL -3M VAK GFL05 GFL06 GFL07 GFL09 GFL11 063C11 063C12 063C31 063C C C C 071C C C C C C GFL05 GFL06 GFL07 GFL09 GFL11 GFL 080C C32 080C33 080C C11 090C C C C C C C GFL09 GFL11 GFL 112C C C C C22 2C C C GFL -3M VCK GFL05 GFL06 GFL07 GFL09 063C C C C32 063C C11 071C 071C C C33 071C GFL05 GFL06 GFL07 GFL09 GFL11 GFL 080C C C C32 080C33 080C C11 090C C C C C C GFL09 GFL11 GFL 112C C C C C C22 2C C C ƒ Weights with oil filling for ounting position A; all values are approxiate. The weights relate to the basi version. Bear in ind that additional weights ay be needed, e.g. for otor options. - 44

55 GFL shaft-ounted helial gearboxes Tehnial data Weights GFL -3M SCR / SDR GFL05 GFL06 GFL07 GFL09 GFL11 063C11 063C12 063C31 063C C C C 071C C C C C C GFL05 GFL06 GFL07 GFL09 GFL11 GFL 080C C32 080C33 080C C11 090C C C C C C C GFL09 GFL11 GFL 112C C C C C22 2C C C32 5 GFL -3M SAR / SBR GFL05 GFL06 GFL07 GFL09 GFL11 063C11 063C12 063C31 063C C C C 071C C C C C C GFL05 GFL06 GFL07 GFL09 GFL11 GFL 080C C32 080C33 080C C11 090C C C C C C C GFL09 GFL11 GFL 112C C C C C22 2C C C ƒ Weights with oil filling for ounting position A; all values are approxiate. The weights relate to the basi version. Bear in ind that additional weights ay be needed, e.g. for otor options. - 45

56 GFL shaft-ounted helial gearboxes Tehnial data Weights GFL -3M SAK GFL05 GFL06 GFL07 GFL09 GFL11 063C11 063C12 063C31 063C C C C 071C C C C C C GFL05 GFL06 GFL07 GFL09 GFL11 GFL 080C C32 080C33 080C C11 090C C C C C C C GFL09 GFL11 GFL 112C C C C C22 2C C C GFL -3M SCK GFL05 GFL06 GFL07 GFL09 GFL11 063C11 063C12 063C31 063C C C C 071C C C C C C GFL05 GFL06 GFL07 GFL09 GFL11 GFL 080C C32 080C33 080C C11 090C C C C C C C GFL09 GFL11 GFL 112C C C C C22 2C C C ƒ Weights with oil filling for ounting position A; all values are approxiate. The weights relate to the basi version. Bear in ind that additional weights ay be needed, e.g. for otor options. - 46

57 GFL shaft-ounted helial gearboxes Tehnial data - 47

58 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 0.12 kw nn 5 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL05-3M 063C GFL05-3M 063C GFL05-3M 063C GFL06-3M 063C GFL06-3M 063C GFL05-3M 063C GFL05-3M 063C GFL05-3M 063C GFL05-3M 063C GFL06-3M 063C GFL05-3M 063C GFL06-3M 063C GFL06-3M 063C GFL05-3M 063C GFL05-3M 063C GFL06-3M 063C GFL05-3M 063C GFL06-3M 063C GFL06-3M 063C GFL05-3M 063C GFL06-3M 063C GFL05-3M 063C GFL06-3M 063C GFL06-3M 063C GFL06-3M 063C12

59 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 0.12 kw nn 5 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL06-3M 063C12-49

60 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 0.18 kw nn 2740 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL05-3M 063C GFL05-3M 063C GFL05-3M 063C GFL05-3M 063C GFL05-3M 063C GFL05-3M 063C GFL05-3M 063C GFL05-3M 063C GFL05-3M 063C GFL05-3M 063C GFL06-3M 063C GFL05-3M 063C GFL06-3M 063C GFL06-3M 063C GFL05-3M 063C GFL06-3M 063C GFL05-3M 063C GFL06-3M 063C GFL06-3M 063C GFL06-3M 063C GFL06-3M 063C11

61 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 0.18 kw nn 65 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL05-3M 063C GFL04-2M 063C GFL06-3M 063C GFL04-2M 063C GFL06-3M 063C GFL05-3M 063C GFL06-3M 063C GFL04-2M 063C GFL05-3M 063C GFL04-2M 063C GFL05-3M 063C GFL05-3M 063C GFL06-3M 063C GFL05-3M 063C GFL06-3M 063C GFL06-3M 063C GFL06-3M 063C GFL05-3M 063C GFL06-3M 063C GFL05-3M 063C GFL06-3M 063C GFL05-3M 063C GFL06-3M 063C GFL05-3M 063C GFL06-3M 063C GFL05-3M 063C GFL06-3M 063C GFL06-3M 063C GFL05-3M 063C32-51

62 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 0.18 kw nn 65 r/in fn 50 Hz [r/in] 3.7 [N] r/in 60 Hz i [r/in] [N] GFL05-3M 063C GFL06-3M 063C GFL05-3M 063C GFL06-3M 063C GFL06-3M 063C GFL06-3M 063C GFL06-3M 063C GFL06-3M 063C32-52

63 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 0.18 kw nn 930 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL05-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL05-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL05-2M 071C GFL05-3M 071C GFL05-2M 071C GFL04-2M 071C GFL05-2M 071C GFL04-2M 071C GFL05-3M 071C GFL05-2M 071C GFL06-2M 071C GFL06-3M 071C GFL05-3M 071C GFL05-2M 071C GFL06-2M 071C GFL06-3M 071C GFL05-3M 071C GFL05-3M 071C GFL06-3M 071C GFL05-3M 071C GFL06-3M 071C GFL05-3M 071C - 53

64 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 0.18 kw nn 930 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL06-3M 071C GFL05-3M 071C GFL06-3M 071C GFL05-3M 071C GFL06-3M 071C GFL05-3M 071C GFL06-3M 071C GFL05-3M 071C GFL06-3M 071C GFL07-3M 071C GFL06-3M 071C GFL07-3M 071C GFL06-3M 071C GFL06-3M 071C GFL07-3M 071C GFL07-3M 071C GFL06-3M 071C GFL07-3M 071C GFL06-3M 071C GFL07-3M 071C GFL09-3M 071C GFL07-3M 071C GFL09-3M 071C GFL07-3M 071C GFL09-3M 071C GFL07-3M 071C GFL09-3M 071C GFL07-3M 071C GFL09-3M 071C GFL07-3M 071C - 54

65 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 0.25 kw nn 2710 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL05-3M 063C GFL05-3M 063C GFL05-3M 063C GFL06-3M 063C GFL06-3M 063C GFL05-3M 063C GFL05-3M 063C GFL05-3M 063C GFL05-3M 063C GFL06-3M 063C GFL05-3M 063C GFL06-3M 063C GFL06-3M 063C GFL05-3M 063C GFL05-3M 063C GFL06-3M 063C GFL05-3M 063C GFL06-3M 063C GFL06-3M 063C GFL05-3M 063C GFL06-3M 063C GFL06-3M 063C GFL06-3M 063C GFL06-3M 063C31-55

66 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 0.25 kw nn 70 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL05-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL05-2M 063C GFL05-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL04-2M 063C GFL05-2M 063C GFL05-3M 063C GFL05-2M 063C GFL06-2M 063C GFL04-2M 063C GFL05-2M 063C GFL04-2M 063C GFL06-2M 063C GFL05-3M 063C GFL05-2M 063C GFL06-2M 063C GFL05-3M 063C GFL05-2M 063C GFL06-2M 063C GFL05-3M 063C GFL05-3M 063C GFL06-3M 063C42

67 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 0.25 kw nn 70 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL05-3M 063C GFL06-3M 063C GFL05-3M 063C GFL06-3M 063C GFL05-3M 063C GFL06-3M 063C GFL05-3M 063C GFL06-3M 063C GFL05-3M 063C GFL06-3M 063C GFL05-3M 063C GFL06-3M 063C GFL07-3M 063C GFL05-3M 063C GFL06-3M 063C GFL05-3M 063C GFL07-3M 063C GFL06-3M 063C GFL06-3M 063C GFL07-3M 063C GFL07-3M 063C GFL09-3M 063C GFL06-3M 063C GFL07-3M 063C GFL09-3M 063C GFL06-3M 063C GFL07-3M 063C GFL06-3M 063C GFL09-3M 063C GFL07-3M 063C GFL06-3M 063C GFL09-3M 063C GFL07-3M 063C GFL09-3M 063C GFL07-3M 063C GFL09-3M 063C GFL07-3M 063C GFL09-3M 063C GFL07-3M 063C42-57

68 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 0.25 kw nn 930 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL05-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL05-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL05-2M 071C GFL04-2M 071C GFL04-2M 071C GFL05-2M 071C GFL04-2M 071C GFL05-2M 071C GFL06-2M 071C GFL04-2M 071C GFL05-2M 071C GFL06-2M 071C GFL05-3M 071C GFL05-2M 071C GFL06-2M 071C GFL04-2M 071C GFL06-3M 071C GFL05-2M 071C GFL04-2M 071C GFL06-3M 071C GFL06-2M 071C33

69 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 0.25 kw nn 930 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL05-3M 071C GFL05-2M 071C GFL06-2M 071C GFL06-3M 071C GFL06-3M 071C GFL05-3M 071C GFL05-2M 071C GFL06-2M 071C GFL06-3M 071C GFL05-3M 071C GFL05-3M 071C GFL06-3M 071C GFL05-3M 071C GFL06-3M 071C GFL05-3M 071C GFL06-3M 071C GFL07-3M 071C GFL05-3M 071C GFL06-3M 071C GFL07-3M 071C GFL06-3M 071C GFL07-3M 071C GFL06-3M 071C GFL07-3M 071C GFL07-3M 071C GFL06-3M 071C GFL07-3M 071C GFL06-3M 071C GFL07-3M 071C GFL09-3M 071C GFL06-3M 071C GFL06-3M 071C GFL07-3M 071C GFL09-3M 071C GFL07-3M 071C GFL09-3M 071C GFL07-3M 071C GFL09-3M 071C GFL09-3M 071C GFL07-3M 071C33-59

70 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 0.25 kw nn 930 r/in fn 50 Hz [r/in] [N] 10 r/in 60 Hz i [r/in] [N] GFL09-3M 071C GFL07-3M 071C GFL09-3M 071C GFL07-3M 071C GFL09-3M 071C GFL09-3M 071C GFL09-3M 071C33-60

71 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 0.37 kw nn 2720 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL05-3M 071C GFL04-2M 071C GFL04-2M 071C GFL05-3M 071C GFL05-2M 071C GFL05-3M 071C GFL05-2M 071C GFL05-3M 071C GFL05-3M 071C GFL05-3M 071C GFL05-3M 071C GFL06-3M 071C GFL05-3M 071C GFL06-3M 071C GFL05-3M 071C GFL06-3M 071C GFL05-3M 071C GFL06-3M 071C GFL05-3M 071C GFL06-3M 071C GFL05-3M 071C GFL06-3M 071C GFL05-3M 071C GFL06-3M 071C GFL06-3M 071C GFL05-3M 071C GFL07-3M 071C GFL07-3M 071C GFL06-3M 071C GFL07-3M 071C11-61

72 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 0.37 kw nn 2720 r/in fn 50 Hz [r/in] [N] 3360 r/in 60 Hz i [r/in] [N] GFL06-3M 071C GFL07-3M 071C GFL06-3M 071C GFL07-3M 071C GFL06-3M 071C GFL09-3M 071C GFL07-3M 071C GFL06-3M 071C GFL09-3M 071C GFL07-3M 071C GFL09-3M 071C GFL07-3M 071C GFL09-3M 071C GFL07-3M 071C11-62

73 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 0.37 kw nn 10 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL05-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL05-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL05-2M 071C GFL04-2M 071C GFL04-2M 071C GFL05-2M 071C GFL04-2M 071C GFL05-2M 071C GFL06-2M 071C GFL04-2M 071C GFL05-2M 071C GFL06-2M 071C GFL05-3M 071C GFL05-2M 071C GFL06-2M 071C GFL04-2M 071C GFL06-3M 071C GFL05-2M 071C GFL04-2M 071C GFL06-3M 071C GFL06-2M 071C32-63

74 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 0.37 kw nn 10 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL05-3M 071C GFL05-2M 071C GFL06-2M 071C GFL06-3M 071C GFL06-3M 071C GFL05-3M 071C GFL05-2M 071C GFL06-2M 071C GFL06-3M 071C GFL05-3M 071C GFL05-3M 071C GFL06-3M 071C GFL05-3M 071C GFL06-3M 071C GFL05-3M 071C GFL06-3M 071C GFL07-3M 071C GFL05-3M 071C GFL06-3M 071C GFL07-3M 071C GFL05-3M 071C GFL06-3M 071C GFL07-3M 071C GFL06-3M 071C GFL07-3M 071C GFL07-3M 071C GFL06-3M 071C GFL07-3M 071C GFL06-3M 071C GFL07-3M 071C GFL09-3M 071C GFL06-3M 071C GFL06-3M 071C GFL07-3M 071C GFL09-3M 071C GFL07-3M 071C GFL09-3M 071C GFL07-3M 071C GFL09-3M 071C GFL09-3M 071C32

75 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 0.37 kw nn 10 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL07-3M 071C GFL09-3M 071C GFL07-3M 071C GFL09-3M 071C GFL07-3M 071C GFL09-3M 071C GFL07-3M 071C GFL09-3M 071C GFL09-3M 071C32-65

76 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 0.37 kw nn 950 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL05-2M 080C GFL04-2M 080C GFL05-2M 080C GFL04-2M 080C GFL05-2M 080C GFL05-2M 080C GFL04-2M 080C GFL04-2M 080C GFL05-2M 080C GFL05-2M 080C GFL05-2M 080C GFL06-2M 080C GFL05-3M 080C GFL05-2M 080C GFL06-2M 080C GFL06-3M 080C GFL05-2M 080C GFL06-3M 080C GFL06-2M 080C GFL05-3M 080C GFL07-2M 080C GFL06-2M 080C GFL06-3M 080C

77 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 0.37 kw nn 950 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL06-3M 080C GFL07-2M 080C GFL05-3M 080C GFL06-2M 080C GFL07-3M 080C GFL06-3M 080C GFL05-3M 080C GFL07-3M 080C GFL07-3M 080C GFL05-3M 080C GFL06-3M 080C GFL07-3M 080C GFL06-3M 080C GFL06-3M 080C GFL07-3M 080C GFL06-3M 080C GFL07-3M 080C GFL06-3M 080C GFL07-3M 080C GFL06-3M 080C GFL07-3M 080C GFL07-3M 080C GFL09-3M 080C GFL07-3M 080C GFL09-3M 080C GFL07-3M 080C GFL09-3M 080C GFL07-3M 080C GFL09-3M 080C GFL07-3M 080C GFL09-3M 080C GFL07-3M 080C GFL09-3M 080C GFL09-3M 080C GFL07-3M 080C GFL09-3M 080C GFL11-3M 080C GFL09-3M 080C GFL11-3M 080C GFL09-3M 080C - 67

78 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 0.37 kw nn 950 r/in fn 50 Hz [r/in] [N] 10 r/in 60 Hz i [r/in] [N] GFL11-3M 080C GFL09-3M 080C GFL11-3M 080C GFL09-3M 080C GFL11-3M 080C - 68

79 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 0.55 kw nn 2630 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL05-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL05-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL05-2M 071C GFL04-2M 071C GFL05-2M 071C GFL05-3M 071C GFL05-2M 071C GFL04-2M 071C GFL05-2M 071C GFL04-2M 071C GFL05-3M 071C GFL05-2M 071C GFL06-2M 071C GFL06-3M 071C GFL06-3M 071C GFL05-3M 071C GFL05-2M 071C GFL06-2M 071C31-69

80 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 0.55 kw nn 2630 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL06-3M 071C GFL05-3M 071C GFL05-3M 071C GFL06-3M 071C GFL05-3M 071C GFL06-3M 071C GFL05-3M 071C GFL06-3M 071C GFL05-3M 071C GFL06-3M 071C GFL05-3M 071C GFL06-3M 071C GFL05-3M 071C GFL06-3M 071C GFL07-3M 071C GFL07-3M 071C GFL06-3M 071C GFL07-3M 071C GFL06-3M 071C GFL07-3M 071C GFL06-3M 071C GFL06-3M 071C GFL07-3M 071C GFL07-3M 071C GFL06-3M 071C GFL07-3M 071C GFL07-3M 071C GFL09-3M 071C GFL07-3M 071C GFL09-3M 071C GFL07-3M 071C GFL09-3M 071C GFL07-3M 071C GFL09-3M 071C GFL07-3M 071C GFL09-3M 071C31

81 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 0.55 kw nn 05 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL05-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL04-2M 071C GFL05-2M 071C GFL04-2M 071C GFL05-2M 071C GFL04-2M 071C GFL05-2M 071C GFL05-2M 071C GFL04-2M 071C GFL06-2M 071C GFL04-2M 071C GFL05-2M 071C GFL06-2M 071C GFL05-2M 071C GFL06-2M 071C GFL05-2M 071C GFL06-2M 071C GFL05-3M 071C GFL05-2M 071C GFL06-2M 071C GFL06-3M 071C GFL05-2M 071C GFL06-3M 071C GFL06-2M 071C42-71

82 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 0.55 kw nn 05 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL05-3M 071C GFL06-2M 071C GFL06-3M 071C GFL06-3M 071C GFL05-3M 071C GFL06-2M 071C GFL07-3M 071C GFL06-3M 071C GFL05-3M 071C GFL07-3M 071C GFL07-3M 071C GFL05-3M 071C GFL06-3M 071C GFL07-3M 071C GFL06-3M 071C GFL06-3M 071C GFL07-3M 071C GFL06-3M 071C GFL07-3M 071C GFL06-3M 071C GFL07-3M 071C GFL09-3M 071C GFL06-3M 071C GFL07-3M 071C GFL09-3M 071C GFL07-3M 071C GFL09-3M 071C GFL07-3M 071C GFL09-3M 071C GFL07-3M 071C GFL09-3M 071C GFL07-3M 071C GFL09-3M 071C GFL07-3M 071C GFL09-3M 071C GFL07-3M 071C GFL09-3M 071C GFL09-3M 071C GFL07-3M 071C GFL09-3M 071C42

83 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 0.55 kw nn 05 r/in fn 50 Hz [r/in] [N] 1720 r/in 60 Hz i [r/in] [N] GFL09-3M 071C GFL09-3M 071C GFL09-3M 071C GFL09-3M 071C42-73

84 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 0.55 kw nn 930 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL05-2M 080C GFL05-2M 080C GFL04-2M 080C GFL04-2M 080C GFL05-2M 080C GFL05-2M 080C GFL04-2M 080C GFL04-2M 080C GFL05-2M 080C GFL04-2M 080C GFL05-2M 080C GFL06-2M 080C GFL04-2M 080C GFL05-2M 080C GFL06-2M 080C GFL05-2M 080C GFL04-2M 080C GFL06-2M 080C GFL05-2M 080C GFL06-2M 080C GFL05-2M 080C GFL07-2M 080C GFL06-2M 080C GFL05-2M 080C GFL07-2M 080C GFL06-2M 080C GFL05-2M 080C33

85 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 0.55 kw nn 930 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL07-2M 080C GFL06-2M 080C GFL07-3M 080C GFL06-3M 080C GFL07-2M 080C GFL06-3M 080C GFL06-2M 080C GFL07-3M 080C GFL07-2M 080C GFL06-2M 080C GFL06-3M 080C GFL07-3M 080C GFL06-3M 080C GFL07-2M 080C GFL06-2M 080C GFL07-3M 080C GFL06-3M 080C GFL07-3M 080C GFL07-3M 080C GFL06-3M 080C GFL07-3M 080C GFL06-3M 080C GFL07-3M 080C GFL09-3M 080C GFL07-3M 080C GFL09-3M 080C GFL07-3M 080C GFL09-3M 080C GFL07-3M 080C GFL09-3M 080C GFL07-3M 080C GFL09-3M 080C GFL07-3M 080C GFL09-3M 080C GFL07-3M 080C GFL09-3M 080C GFL09-3M 080C GFL09-3M 080C GFL11-3M 080C GFL09-3M 080C33-75

86 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 0.55 kw nn 930 r/in fn 50 Hz [r/in] [N] 10 r/in 60 Hz i [r/in] [N] GFL11-3M 080C GFL09-3M 080C GFL11-3M 080C GFL09-3M 080C GFL11-3M 080C GFL11-3M 080C GFL11-3M 080C GFL11-3M 080C GFL11-3M 080C33-76

87 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 0.75 kw nn 2720 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL05-2M 080C GFL05-2M 080C GFL04-2M 080C GFL04-2M 080C GFL05-2M 080C GFL05-2M 080C GFL05-2M 080C GFL05-3M 080C GFL05-2M 080C GFL06-3M 080C GFL05-2M 080C GFL06-3M 080C GFL05-3M 080C GFL06-2M 080C GFL06-3M 080C GFL06-3M 080C GFL05-3M 080C GFL06-2M 080C GFL06-3M 080C GFL05-3M 080C GFL05-3M 080C GFL06-3M 080C GFL05-3M 080C GFL06-3M 080C GFL05-3M 080C11-77

88 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 0.75 kw nn 2720 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL06-3M 080C GFL07-3M 080C GFL05-3M 080C GFL06-3M 080C GFL07-3M 080C GFL06-3M 080C GFL07-3M 080C GFL06-3M 080C GFL07-3M 080C GFL07-3M 080C GFL06-3M 080C GFL07-3M 080C GFL06-3M 080C GFL07-3M 080C GFL06-3M 080C GFL07-3M 080C GFL07-3M 080C GFL09-3M 080C GFL07-3M 080C GFL09-3M 080C GFL09-3M 080C GFL07-3M 080C GFL09-3M 080C GFL07-3M 080C GFL09-3M 080C GFL09-3M 080C GFL09-3M 080C GFL11-3M 080C GFL09-3M 080C GFL11-3M 080C11-78

89 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 0.75 kw nn 10 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL05-2M 080C GFL05-2M 080C GFL04-2M 080C GFL04-2M 080C GFL05-2M 080C GFL04-2M 080C GFL05-2M 080C GFL04-2M 080C GFL05-2M 080C GFL05-2M 080C GFL04-2M 080C GFL06-2M 080C GFL05-2M 080C GFL06-2M 080C GFL05-2M 080C GFL07-2M 080C GFL06-2M 080C GFL05-2M 080C GFL07-2M 080C GFL06-2M 080C GFL05-2M 080C GFL07-2M 080C GFL06-2M 080C GFL07-3M 080C GFL06-3M 080C32-79

90 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 0.75 kw nn 10 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL05-2M 080C GFL07-2M 080C GFL06-3M 080C GFL06-2M 080C GFL07-3M 080C GFL07-2M 080C GFL06-2M 080C GFL06-3M 080C GFL07-3M 080C GFL06-3M 080C GFL07-2M 080C GFL06-2M 080C GFL07-3M 080C GFL06-3M 080C GFL07-3M 080C GFL07-3M 080C GFL06-3M 080C GFL07-3M 080C GFL06-3M 080C GFL07-3M 080C GFL09-3M 080C GFL07-3M 080C GFL09-3M 080C GFL07-3M 080C GFL09-3M 080C GFL07-3M 080C GFL09-3M 080C GFL07-3M 080C GFL09-3M 080C GFL07-3M 080C GFL09-3M 080C GFL07-3M 080C GFL09-3M 080C GFL09-3M 080C GFL07-3M 080C GFL09-3M 080C GFL11-3M 080C GFL09-3M 080C GFL11-3M 080C GFL09-3M 080C32

91 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 0.75 kw nn 10 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL11-3M 080C GFL09-3M 080C GFL11-3M 080C GFL11-3M 080C GFL11-3M 080C GFL11-3M 080C GFL11-3M 080C32-81

92 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = kw nn 2720 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL05-2M 080C GFL04-2M 080C GFL04-2M 080C GFL05-2M 080C GFL04-2M 080C GFL05-2M 080C GFL04-2M 080C GFL05-2M 080C GFL05-2M 080C GFL04-2M 080C GFL04-2M 080C GFL05-2M 080C GFL05-2M 080C GFL06-2M 080C GFL05-2M 080C GFL06-2M 080C GFL05-3M 080C GFL05-2M 080C GFL07-2M 080C GFL06-2M 080C GFL06-3M 080C GFL05-2M 080C GFL06-3M 080C GFL06-2M 080C GFL07-3M 080C31

93 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = kw nn 2720 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL07-2M 080C GFL06-2M 080C GFL06-3M 080C GFL07-3M 080C GFL06-3M 080C GFL07-2M 080C GFL05-3M 080C GFL06-2M 080C GFL07-3M 080C GFL06-3M 080C GFL05-3M 080C GFL07-3M 080C GFL07-3M 080C GFL06-3M 080C GFL07-3M 080C GFL06-3M 080C GFL06-3M 080C GFL07-3M 080C GFL06-3M 080C GFL07-3M 080C GFL06-3M 080C GFL07-3M 080C GFL06-3M 080C GFL07-3M 080C GFL07-3M 080C GFL09-3M 080C GFL07-3M 080C GFL09-3M 080C GFL07-3M 080C GFL09-3M 080C GFL07-3M 080C GFL09-3M 080C GFL07-3M 080C GFL09-3M 080C GFL07-3M 080C GFL09-3M 080C GFL09-3M 080C GFL09-3M 080C GFL11-3M 080C GFL09-3M 080C31-83

94 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = kw nn 2720 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL11-3M 080C GFL09-3M 080C GFL11-3M 080C GFL09-3M 080C GFL11-3M 080C GFL11-3M 080C31-84

95 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = kw nn 90 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL04-2M 080C GFL05-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL04-2M 080C GFL05-2M 080C GFL05-2M 080C GFL04-2M 080C GFL05-2M 080C GFL04-2M 080C GFL04-2M 080C GFL05-2M 080C GFL05-2M 080C GFL04-2M 080C GFL04-2M 080C GFL05-2M 080C GFL05-2M 080C GFL04-2M 080C GFL04-2M 080C GFL05-2M 080C GFL06-2M 080C GFL05-2M 080C GFL06-2M 080C GFL05-2M 080C GFL06-2M 080C GFL07-2M 080C GFL05-2M 080C GFL06-2M 080C GFL07-2M 080C GFL05-2M 080C GFL06-2M 080C GFL07-2M 080C GFL06-2M 080C GFL07-2M 080C42-85

96 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = kw nn 90 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL06-2M 080C GFL07-2M 080C GFL06-2M 080C GFL07-3M 080C GFL06-3M 080C GFL07-2M 080C GFL06-3M 080C GFL06-2M 080C GFL07-3M 080C GFL09-3M 080C GFL07-2M 080C GFL06-3M 080C GFL07-3M 080C GFL09-3M 080C GFL07-2M 080C GFL07-3M 080C GFL09-3M 080C GFL07-3M 080C GFL09-3M 080C GFL07-3M 080C GFL09-3M 080C GFL07-3M 080C GFL09-3M 080C GFL07-3M 080C GFL09-3M 080C GFL07-3M 080C GFL09-3M 080C GFL11-3M 080C GFL07-3M 080C GFL09-3M 080C GFL11-3M 080C GFL07-3M 080C GFL09-3M 080C GFL07-3M 080C GFL11-3M 080C GFL09-3M 080C GFL11-3M 080C GFL09-3M 080C GFL11-3M 080C GFL09-3M 080C42

97 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = kw nn 90 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL11-3M 080C GFL09-3M 080C GFL09-3M 080C GFL11-3M 080C GFL09-3M 080C GFL11-3M 080C GFL09-3M 080C GFL11-3M 080C GFL11-3M 080C GFL11-3M 080C GFL11-3M 080C GFL11-3M 080C GFL11-3M 080C42-87

98 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = kw nn 2710 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL04-2M 090C GFL05-2M 090C GFL04-2M 090C GFL04-2M 090C GFL04-2M 090C GFL04-2M 090C GFL04-2M 090C GFL04-2M 090C GFL04-2M 090C GFL04-2M 090C GFL04-2M 090C GFL04-2M 090C GFL05-2M 090C GFL04-2M 090C GFL04-2M 090C GFL05-2M 090C GFL05-2M 090C GFL04-2M 090C GFL04-2M 090C GFL05-2M 090C GFL05-2M 090C GFL04-2M 090C GFL04-2M 090C GFL05-2M 090C GFL05-2M 090C GFL05-2M 090C GFL06-2M 090C GFL05-2M 090C GFL06-2M 090C GFL05-2M 090C GFL06-2M 090C GFL06-2M 090C GFL06-2M 090C GFL06-2M 090C GFL07-3M 090C GFL06-3M 090C GFL06-3M 090C GFL06-2M 090C GFL07-3M 090C GFL07-2M 090C11

99 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = kw nn 2710 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL06-3M 090C GFL07-3M 090C GFL06-3M 090C GFL07-2M 090C GFL07-3M 090C GFL06-3M 090C GFL07-3M 090C GFL07-3M 090C GFL09-3M 090C GFL07-3M 090C GFL09-3M 090C GFL06-3M 090C GFL07-3M 090C GFL09-3M 090C GFL07-3M 090C GFL09-3M 090C GFL07-3M 090C GFL09-3M 090C GFL07-3M 090C GFL09-3M 090C GFL07-3M 090C GFL09-3M 090C GFL07-3M 090C GFL09-3M 090C GFL09-3M 090C GFL09-3M 090C GFL09-3M 090C GFL11-3M 090C GFL09-3M 090C GFL11-3M 090C GFL09-3M 090C GFL11-3M 090C GFL09-3M 090C GFL11-3M 090C GFL11-3M 090C GFL-3M 090C GFL11-3M 090C GFL-3M 090C GFL11-3M 090C GFL-3M 090C11-89

100 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = kw nn 2710 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL11-3M 090C GFL-3M 090C11-90

101 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = kw nn 10 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL04-2M 090C GFL05-2M 090C GFL04-2M 090C GFL04-2M 090C GFL05-2M 090C GFL04-2M 090C GFL04-2M 090C GFL04-2M 090C GFL05-2M 090C GFL04-2M 090C GFL05-2M 090C GFL04-2M 090C GFL05-2M 090C GFL04-2M 090C GFL04-2M 090C GFL05-2M 090C GFL05-2M 090C GFL04-2M 090C GFL05-2M 090C GFL04-2M 090C GFL04-2M 090C GFL05-2M 090C GFL05-2M 090C GFL04-2M 090C GFL06-2M 090C GFL05-2M 090C GFL06-2M 090C GFL05-2M 090C GFL06-2M 090C GFL05-2M 090C GFL06-2M 090C GFL05-2M 090C GFL06-2M 090C GFL05-2M 090C GFL06-2M 090C GFL07-2M 090C GFL05-2M 090C GFL06-2M 090C GFL07-2M 090C GFL06-2M 090C32-91

102 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = kw nn 10 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL09-2M 090C GFL07-2M 090C GFL06-2M 090C GFL09-2M 090C GFL07-2M 090C GFL06-2M 090C GFL09-2M 090C GFL07-2M 090C GFL09-3M 090C GFL06-2M 090C GFL07-3M 090C GFL09-2M 090C GFL07-2M 090C GFL06-2M 090C GFL07-3M 090C GFL09-3M 090C GFL09-2M 090C GFL07-2M 090C GFL07-3M 090C GFL09-3M 090C GFL09-2M 090C GFL07-2M 090C GFL07-3M 090C GFL09-3M 090C GFL07-3M 090C GFL09-3M 090C GFL07-3M 090C GFL09-3M 090C GFL07-3M 090C GFL09-3M 090C GFL09-3M 090C GFL11-3M 090C GFL09-3M 090C GFL11-3M 090C GFL11-3M 090C GFL09-3M 090C GFL-3M 090C GFL11-3M 090C GFL09-3M 090C GFL11-3M 090C32

103 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = kw nn 10 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL09-3M 090C GFL11-3M 090C GFL09-3M 090C GFL11-3M 090C GFL09-3M 090C GFL11-3M 090C GFL09-3M 090C GFL-3M 090C GFL09-3M 090C GFL11-3M 090C GFL-3M 090C GFL09-3M 090C GFL11-3M 090C GFL11-3M 090C GFL-3M 090C GFL11-3M 090C GFL-3M 090C GFL11-3M 090C GFL-3M 090C GFL11-3M 090C GFL-3M 090C GFL-3M 090C GFL-3M 090C32-93

104 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = kw nn 2730 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL04-2M 090C GFL05-2M 090C GFL04-2M 090C GFL04-2M 090C GFL05-2M 090C GFL04-2M 090C GFL04-2M 090C GFL04-2M 090C GFL05-2M 090C GFL04-2M 090C GFL05-2M 090C GFL04-2M 090C GFL05-2M 090C GFL04-2M 090C GFL04-2M 090C GFL05-2M 090C GFL05-2M 090C GFL04-2M 090C GFL05-2M 090C GFL04-2M 090C GFL04-2M 090C GFL05-2M 090C GFL05-2M 090C GFL04-2M 090C GFL04-2M 090C GFL05-2M 090C GFL06-2M 090C GFL05-2M 090C GFL04-2M 090C GFL06-2M 090C GFL05-2M 090C GFL06-2M 090C GFL05-2M 090C GFL06-2M 090C GFL05-2M 090C GFL06-2M 090C GFL05-2M 090C GFL06-2M 090C GFL05-2M 090C GFL06-2M 090C31

105 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = kw nn 2730 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL07-2M 090C GFL06-2M 090C GFL07-2M 090C GFL06-2M 090C GFL09-2M 090C GFL07-2M 090C GFL09-3M 090C GFL06-2M 090C GFL07-3M 090C GFL06-3M 090C GFL07-2M 090C GFL06-3M 090C GFL06-2M 090C GFL07-3M 090C GFL09-3M 090C GFL09-2M 090C GFL07-2M 090C GFL06-3M 090C GFL07-3M 090C GFL09-3M 090C GFL09-2M 090C GFL07-2M 090C GFL07-3M 090C GFL09-3M 090C GFL07-3M 090C GFL09-3M 090C GFL07-3M 090C GFL09-3M 090C GFL07-3M 090C GFL09-3M 090C GFL07-3M 090C GFL09-3M 090C GFL07-3M 090C GFL09-3M 090C GFL11-3M 090C GFL07-3M 090C GFL09-3M 090C GFL11-3M 090C GFL07-3M 090C GFL09-3M 090C31-95

106 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = kw nn 2730 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL07-3M 090C GFL11-3M 090C GFL09-3M 090C GFL11-3M 090C GFL09-3M 090C GFL11-3M 090C GFL09-3M 090C GFL11-3M 090C GFL09-3M 090C GFL09-3M 090C GFL11-3M 090C GFL09-3M 090C GFL11-3M 090C GFL09-3M 090C GFL11-3M 090C GFL11-3M 090C GFL-3M 090C GFL11-3M 090C GFL-3M 090C GFL11-3M 090C GFL-3M 090C GFL11-3M 090C GFL-3M 090C GFL11-3M 090C GFL-3M 090C31-96

107 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = kw nn 40 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL05-2M 100C GFL05-2M 100C GFL05-2M 100C GFL05-2M 100C GFL05-2M 100C GFL05-2M 100C GFL05-2M 100C GFL05-2M 100C GFL05-2M 100C GFL06-2M 100C GFL05-2M 100C GFL05-2M 100C GFL06-2M 100C GFL05-2M 100C GFL06-2M 100C GFL05-2M 100C GFL06-2M 100C GFL05-2M 100C GFL06-2M 100C GFL05-2M 100C GFL06-2M 100C GFL05-2M 100C GFL06-2M 100C GFL05-2M 100C GFL06-2M 100C GFL07-2M 100C GFL06-2M 100C GFL07-2M 100C GFL06-2M 100C GFL07-2M 100C GFL06-2M 100C GFL07-2M 100C GFL06-2M 100C GFL07-2M 100C GFL06-2M 100C GFL09-2M 100C GFL07-2M 100C GFL09-2M 100C GFL07-2M 100C GFL09-2M 100C12-97

108 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = kw nn 40 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL07-2M 100C GFL11-2M 100C GFL09-3M 100C GFL07-3M 100C GFL11-3M 100C GFL09-2M 100C GFL07-2M 100C GFL11-2M 100C GFL07-3M 100C GFL09-3M 100C GFL11-3M 100C GFL09-2M 100C GFL11-2M 100C GFL07-3M 100C GFL09-3M 100C GFL11-3M 100C GFL09-2M 100C GFL11-2M 100C GFL09-3M 100C GFL11-3M 100C GFL09-3M 100C GFL11-3M 100C GFL09-3M 100C GFL11-3M 100C GFL09-3M 100C GFL11-3M 100C GFL09-3M 100C GFL11-3M 100C GFL09-3M 100C GFL11-3M 100C GFL11-3M 100C GFL09-3M 100C GFL-3M 100C GFL11-3M 100C GFL09-3M 100C GFL11-3M 100C GFL-3M 100C GFL11-3M 100C GFL-3M 100C GFL11-3M 100C12

109 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = kw nn 40 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL-3M 100C GFL11-3M 100C GFL-3M 100C GFL-3M 100C GFL11-3M 100C GFL-3M 100C GFL11-3M 100C GFL11-3M 100C GFL-3M 100C GFL11-3M 100C GFL-3M 100C GFL-3M 100C GFL-3M 100C GFL-3M 100C GFL-3M 100C12-99

110 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 3.0 kw nn 2890 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL05-2M 100C GFL05-2M 100C GFL05-2M 100C GFL05-2M 100C GFL05-2M 100C GFL05-2M 100C GFL05-2M 100C GFL05-2M 100C GFL05-2M 100C GFL05-2M 100C GFL05-2M 100C GFL05-2M 100C GFL05-2M 100C GFL05-2M 100C GFL06-2M 100C GFL05-2M 100C GFL06-2M 100C GFL05-2M 100C GFL06-2M 100C GFL05-2M 100C GFL06-2M 100C GFL05-2M 100C GFL06-2M 100C GFL06-2M 100C GFL06-2M 100C GFL06-2M 100C GFL07-2M 100C GFL06-2M 100C GFL07-2M 100C GFL07-2M 100C GFL09-2M 100C GFL07-2M 100C GFL09-3M 100C GFL07-3M 100C GFL07-2M 100C GFL07-3M 100C GFL09-3M 100C GFL09-2M 100C GFL07-3M 100C GFL09-3M 100C31-100

111 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 3.0 kw nn 2890 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL09-2M 100C GFL07-3M 100C GFL09-3M 100C GFL07-3M 100C GFL09-3M 100C GFL07-3M 100C GFL09-3M 100C GFL11-3M 100C GFL07-3M 100C GFL09-3M 100C GFL11-3M 100C GFL09-3M 100C GFL11-3M 100C GFL09-3M 100C GFL11-3M 100C GFL11-3M 100C GFL09-3M 100C GFL11-3M 100C GFL09-3M 100C GFL11-3M 100C GFL09-3M 100C GFL11-3M 100C GFL09-3M 100C GFL11-3M 100C GFL11-3M 100C GFL-3M 100C GFL11-3M 100C GFL-3M 100C GFL11-3M 100C GFL11-3M 100C GFL-3M 100C GFL11-3M 100C GFL-3M 100C GFL11-3M 100C GFL-3M 100C GFL11-3M 100C GFL-3M 100C GFL-3M 100C GFL-3M 100C31-101

112 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 3.0 kw nn 30 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL05-2M 100C GFL05-2M 100C GFL05-2M 100C GFL05-2M 100C GFL05-2M 100C GFL06-2M 100C GFL05-2M 100C GFL06-2M 100C GFL05-2M 100C GFL05-2M 100C GFL06-2M 100C GFL05-2M 100C GFL06-2M 100C GFL05-2M 100C GFL06-2M 100C GFL05-2M 100C GFL06-2M 100C GFL05-2M 100C GFL06-2M 100C GFL05-2M 100C GFL06-2M 100C GFL05-2M 100C GFL06-2M 100C GFL05-2M 100C GFL07-2M 100C GFL06-2M 100C GFL07-2M 100C GFL06-2M 100C GFL07-2M 100C GFL06-2M 100C GFL07-2M 100C GFL06-2M 100C GFL07-2M 100C GFL09-2M 100C GFL06-2M 100C GFL07-2M 100C GFL09-2M 100C GFL06-2M 100C GFL07-2M 100C GFL09-2M 100C32-102

113 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 3.0 kw nn 30 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL06-2M 100C GFL07-2M 100C GFL09-2M 100C GFL09-2M 100C GFL07-2M 100C GFL11-2M 100C GFL09-2M 100C GFL07-2M 100C GFL11-2M 100C GFL09-2M 100C GFL07-2M 100C GFL11-2M 100C GFL09-3M 100C GFL11-3M 100C GFL09-2M 100C GFL07-2M 100C GFL11-2M 100C GFL09-3M 100C GFL11-3M 100C GFL09-2M 100C GFL11-2M 100C GFL09-3M 100C GFL11-3M 100C GFL09-2M 100C GFL11-2M 100C GFL09-3M 100C GFL11-3M 100C GFL-3M 100C GFL09-3M 100C GFL11-3M 100C GFL-3M 100C GFL09-3M 100C GFL11-3M 100C GFL-3M 100C GFL09-3M 100C GFL11-3M 100C GFL11-3M 100C GFL-3M 100C GFL11-3M 100C GFL-3M 100C32-103

114 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 3.0 kw nn 30 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL11-3M 100C GFL-3M 100C GFL11-3M 100C GFL11-3M 100C GFL-3M 100C GFL11-3M 100C GFL-3M 100C GFL11-3M 100C GFL-3M 100C GFL11-3M 100C GFL-3M 100C GFL-3M 100C GFL-3M 100C GFL-3M 100C GFL-3M 100C GFL-3M 100C GFL-3M 100C32-104

115 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 4.0 kw nn 2840 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL05-2M 100C GFL05-2M 100C GFL05-2M 100C GFL05-2M 100C GFL05-2M 100C GFL05-2M 100C GFL05-2M 100C GFL05-2M 100C GFL05-2M 100C GFL06-2M 100C GFL05-2M 100C GFL05-2M 100C GFL06-2M 100C GFL05-2M 100C GFL06-2M 100C GFL05-2M 100C GFL06-2M 100C GFL05-2M 100C GFL06-2M 100C GFL05-2M 100C GFL06-2M 100C GFL05-2M 100C GFL06-2M 100C GFL05-2M 100C GFL06-2M 100C GFL07-2M 100C GFL06-2M 100C GFL07-2M 100C GFL06-2M 100C GFL07-2M 100C GFL06-2M 100C GFL07-2M 100C GFL06-2M 100C GFL07-2M 100C GFL06-2M 100C GFL09-2M 100C GFL07-2M 100C GFL09-2M 100C GFL07-2M 100C GFL09-2M 100C41-105

116 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 4.0 kw nn 2840 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL07-2M 100C GFL11-2M 100C GFL09-3M 100C GFL07-3M 100C GFL09-2M 100C GFL07-2M 100C GFL11-2M 100C GFL07-3M 100C GFL09-3M 100C GFL11-3M 100C GFL09-2M 100C GFL11-2M 100C GFL07-3M 100C GFL09-3M 100C GFL11-3M 100C GFL09-2M 100C GFL11-2M 100C GFL07-3M 100C GFL09-3M 100C GFL11-3M 100C GFL07-3M 100C GFL09-3M 100C GFL11-3M 100C GFL09-3M 100C GFL11-3M 100C GFL09-3M 100C GFL11-3M 100C GFL09-3M 100C GFL11-3M 100C GFL09-3M 100C GFL11-3M 100C GFL11-3M 100C GFL09-3M 100C GFL-3M 100C GFL11-3M 100C GFL09-3M 100C GFL11-3M 100C GFL-3M 100C GFL09-3M 100C GFL11-3M 100C41

117 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 4.0 kw nn 2840 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL-3M 100C GFL09-3M 100C GFL11-3M 100C GFL-3M 100C GFL11-3M 100C GFL-3M 100C GFL-3M 100C GFL11-3M 100C GFL-3M 100C GFL11-3M 100C GFL11-3M 100C GFL-3M 100C GFL11-3M 100C GFL-3M 100C GFL-3M 100C GFL-3M 100C GFL-3M 100C GFL-3M 100C41-107

118 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 4.0 kw nn 50 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL06-2M 112C GFL07-2M 112C GFL06-2M 112C GFL06-2M 112C GFL06-2M 112C GFL06-2M 112C GFL06-2M 112C GFL06-2M 112C GFL06-2M 112C GFL06-2M 112C GFL06-2M 112C GFL07-2M 112C GFL06-2M 112C GFL07-2M 112C GFL06-2M 112C GFL07-2M 112C GFL06-2M 112C GFL07-2M 112C GFL06-2M 112C GFL07-2M 112C GFL06-2M 112C GFL07-2M 112C GFL06-2M 112C GFL07-2M 112C GFL06-2M 112C GFL07-2M 112C GFL09-2M 112C GFL11-2M 112C GFL07-2M 112C GFL09-2M 112C GFL11-2M 112C GFL07-2M 112C GFL09-2M 112C GFL11-2M 112C GFL07-2M 112C GFL09-2M 112C GFL11-2M 112C GFL09-2M 112C GFL11-2M 112C GFL-2M 112C22-108

119 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 4.0 kw nn 50 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL09-2M 112C GFL11-2M 112C GFL-2M 112C GFL09-2M 112C GFL11-2M 112C GFL-2M 112C GFL09-3M 112C GFL11-3M 112C GFL-3M 112C GFL09-2M 112C GFL11-2M 112C GFL-2M 112C GFL09-3M 112C GFL11-3M 112C GFL-3M 112C GFL11-2M 112C GFL-2M 112C GFL09-3M 112C GFL11-3M 112C GFL-3M 112C GFL11-2M 112C GFL-2M 112C GFL11-3M 112C GFL-3M 112C GFL11-3M 112C GFL-3M 112C GFL11-3M 112C GFL-3M 112C GFL11-3M 112C GFL-3M 112C GFL11-3M 112C GFL-3M 112C GFL11-3M 112C GFL-3M 112C GFL11-3M 112C GFL-3M 112C GFL11-3M 112C GFL-3M 112C GFL-3M 112C GFL-3M 112C22-109

120 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 4.0 kw nn 50 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL-3M 112C GFL-3M 112C GFL-3M 112C GFL-3M 112C GFL-3M 112C22-110

121 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 5.5 kw nn 2900 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL06-2M 112C GFL07-2M 112C GFL06-2M 112C GFL06-2M 112C GFL06-2M 112C GFL06-2M 112C GFL06-2M 112C GFL06-2M 112C GFL06-2M 112C GFL06-2M 112C GFL06-2M 112C GFL06-2M 112C GFL06-2M 112C GFL07-2M 112C GFL06-2M 112C GFL07-2M 112C GFL06-2M 112C GFL07-2M 112C GFL06-2M 112C GFL07-2M 112C GFL06-2M 112C GFL07-2M 112C GFL06-2M 112C GFL07-2M 112C GFL07-2M 112C GFL07-2M 112C GFL09-2M 112C GFL07-2M 112C GFL09-2M 112C GFL09-2M 112C GFL11-2M 112C GFL09-2M 112C GFL11-2M 112C GFL09-2M 112C GFL11-2M 112C GFL-2M 112C GFL09-3M 112C GFL11-3M 112C GFL09-2M 112C GFL11-2M 112C31-111

122 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 5.5 kw nn 2900 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL09-3M 112C GFL11-3M 112C GFL11-2M 112C GFL-2M 112C GFL09-3M 112C GFL11-3M 112C GFL11-2M 112C GFL-2M 112C GFL09-3M 112C GFL11-3M 112C GFL09-3M 112C GFL11-3M 112C GFL09-3M 112C GFL11-3M 112C GFL09-3M 112C GFL11-3M 112C GFL-3M 112C GFL11-3M 112C GFL-3M 112C GFL11-3M 112C GFL-3M 112C GFL11-3M 112C GFL-3M 112C GFL11-3M 112C GFL11-3M 112C GFL-3M 112C GFL11-3M 112C GFL-3M 112C GFL11-3M 112C GFL-3M 112C GFL11-3M 112C GFL-3M 112C GFL-3M 112C GFL-3M 112C GFL-3M 112C GFL-3M 112C GFL-3M 112C GFL-3M 112C31

123 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 5.5 kw nn 45 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL07-2M 112C GFL06-2M 112C GFL07-2M 112C GFL07-2M 112C GFL06-2M 112C GFL07-2M 112C GFL06-2M 112C GFL07-2M 112C GFL06-2M 112C GFL06-2M 112C GFL07-2M 112C GFL07-2M 112C GFL06-2M 112C GFL07-2M 112C GFL06-2M 112C GFL07-2M 112C GFL06-2M 112C GFL09-2M 112C GFL06-2M 112C GFL07-2M 112C GFL06-2M 112C GFL07-2M 112C GFL07-2M 112C GFL06-2M 112C GFL07-2M 112C GFL06-2M 112C GFL09-2M 112C GFL07-2M 112C GFL06-2M 112C GFL09-2M 112C GFL09-2M 112C GFL07-2M 112C GFL06-2M 112C GFL09-2M 112C GFL07-2M 112C GFL09-2M 112C GFL07-2M 112C GFL09-2M 112C GFL07-2M 112C GFL07-2M 112C32-1

124 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 5.5 kw nn 45 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL09-2M 112C GFL11-2M 112C GFL07-2M 112C GFL09-2M 112C GFL11-2M 112C GFL07-2M 112C GFL09-2M 112C GFL11-2M 112C GFL09-2M 112C GFL11-2M 112C GFL09-2M 112C GFL11-2M 112C GFL-2M 112C GFL09-2M 112C GFL11-2M 112C GFL-2M 112C GFL09-2M 112C GFL11-2M 112C GFL-2M 112C GFL-3M 112C GFL11-3M 112C GFL-3M 112C GFL09-2M 112C GFL11-2M 112C GFL-2M 112C GFL11-3M 112C GFL-3M 112C GFL11-2M 112C GFL-2M 112C GFL11-3M 112C GFL-3M 112C GFL11-2M 112C GFL-2M 112C GFL11-3M 112C GFL-3M 112C GFL11-3M 112C GFL-3M 112C GFL11-3M 112C GFL-3M 112C GFL11-3M 112C32

125 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 5.5 kw nn 45 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL-3M 112C GFL-3M 112C GFL-3M 112C GFL-3M 112C GFL-3M 112C GFL-3M 112C GFL-3M 112C GFL-3M 112C GFL-3M 112C GFL-3M 112C32-115

126 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 7.5 kw nn 2890 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL06-2M 112C GFL07-2M 112C GFL06-2M 112C GFL06-2M 112C GFL07-2M 112C GFL06-2M 112C GFL06-2M 112C GFL06-2M 112C GFL06-2M 112C GFL07-2M 112C GFL06-2M 112C GFL06-2M 112C GFL07-2M 112C GFL06-2M 112C GFL07-2M 112C GFL07-2M 112C GFL06-2M 112C GFL07-2M 112C GFL06-2M 112C GFL07-2M 112C GFL06-2M 112C GFL07-2M 112C GFL06-2M 112C GFL07-2M 112C GFL06-2M 112C GFL09-2M 112C GFL07-2M 112C GFL06-2M 112C GFL09-2M 112C GFL07-2M 112C GFL06-2M 112C GFL07-2M 112C GFL09-2M 112C GFL11-2M 112C GFL07-2M 112C GFL09-2M 112C GFL11-2M 112C GFL07-2M 112C GFL09-2M 112C GFL11-2M 112C41-1

127 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 7.5 kw nn 2890 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL07-2M 112C GFL09-2M 112C GFL11-2M 112C GFL09-2M 112C GFL11-2M 112C GFL-2M 112C GFL09-2M 112C GFL11-2M 112C GFL-2M 112C GFL09-2M 112C GFL11-2M 112C GFL-2M 112C GFL09-3M 112C GFL11-3M 112C GFL09-2M 112C GFL11-2M 112C GFL-2M 112C GFL09-3M 112C GFL11-3M 112C GFL11-2M 112C GFL-2M 112C GFL09-3M 112C GFL11-3M 112C GFL-3M 112C GFL11-2M 112C GFL-2M 112C GFL11-3M 112C GFL-3M 112C GFL11-3M 112C GFL-3M 112C GFL11-3M 112C GFL-3M 112C GFL11-3M 112C GFL-3M 112C GFL11-3M 112C GFL-3M 112C GFL11-3M 112C GFL-3M 112C GFL11-3M 112C GFL-3M 112C41-117

128 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 7.5 kw nn 2890 r/in fn 50 Hz [r/in] [N] 3500 r/in 60 Hz i [r/in] [N] GFL11-3M 112C GFL11-3M 112C GFL-3M 112C GFL11-3M 112C GFL-3M 112C GFL11-3M 112C GFL-3M 112C GFL-3M 112C GFL-3M 112C GFL-3M 112C GFL-3M 112C GFL-3M 112C41-118

129 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 7.5 kw nn 55 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL07-2M 2C GFL07-2M 2C GFL07-2M 2C GFL07-2M 2C GFL07-2M 2C GFL07-2M 2C GFL07-2M 2C GFL07-2M 2C GFL07-2M 2C GFL07-2M 2C GFL09-2M 2C GFL07-2M 2C GFL09-2M 2C GFL09-2M 2C GFL07-2M 2C GFL09-2M 2C GFL07-2M 2C GFL09-2M 2C GFL07-2M 2C GFL09-2M 2C GFL07-2M 2C GFL11-2M 2C GFL07-2M 2C GFL09-2M 2C GFL11-2M 2C GFL09-2M 2C GFL11-2M 2C GFL09-2M 2C GFL11-2M 2C GFL09-2M 2C GFL11-2M 2C GFL11-2M 2C GFL-2M 2C GFL11-2M 2C GFL-2M 2C GFL11-2M 2C GFL-2M 2C GFL-3M 2C GFL11-3M 2C GFL-3M 2C22-119

130 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 7.5 kw nn 55 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL11-2M 2C GFL-2M 2C GFL11-3M 2C GFL-3M 2C GFL-2M 2C GFL11-3M 2C GFL-3M 2C GFL-2M 2C GFL-3M 2C GFL-3M 2C GFL-3M 2C GFL-3M 2C GFL-3M 2C GFL-3M 2C GFL-3M 2C GFL-3M 2C22-120

131 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 9.0 kw nn 2890 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL07-2M 2C GFL07-2M 2C GFL07-2M 2C GFL07-2M 2C GFL07-2M 2C GFL07-2M 2C GFL07-2M 2C GFL07-2M 2C GFL07-2M 2C GFL07-2M 2C GFL07-2M 2C GFL07-2M 2C GFL09-2M 2C GFL07-2M 2C GFL07-2M 2C GFL09-2M 2C GFL07-2M 2C GFL09-2M 2C GFL09-2M 2C GFL09-2M 2C GFL11-2M 2C GFL11-2M 2C GFL11-2M 2C GFL-3M 2C GFL11-3M 2C GFL-3M 2C GFL11-2M 2C GFL11-3M 2C GFL-3M 2C GFL-2M 2C GFL11-3M 2C GFL-3M 2C GFL-2M 2C GFL11-3M 2C GFL-3M 2C GFL11-3M 2C GFL-3M 2C GFL11-3M 2C GFL-3M 2C GFL11-3M 2C21-121

132 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 9.0 kw nn 2890 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL-3M 2C GFL11-3M 2C GFL-3M 2C GFL11-3M 2C GFL-3M 2C GFL-3M 2C GFL-3M 2C GFL-3M 2C GFL-3M 2C21-122

133 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 9.2 kw nn 50 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL07-2M 2C GFL07-2M 2C GFL07-2M 2C GFL07-2M 2C GFL07-2M 2C GFL07-2M 2C GFL07-2M 2C GFL07-2M 2C GFL07-2M 2C GFL07-2M 2C GFL09-2M 2C GFL07-2M 2C GFL07-2M 2C GFL09-2M 2C GFL07-2M 2C GFL09-2M 2C GFL07-2M 2C GFL09-2M 2C GFL09-2M 2C GFL07-2M 2C GFL09-2M 2C GFL07-2M 2C GFL11-2M 2C GFL09-2M 2C GFL07-2M 2C GFL11-2M 2C GFL09-2M 2C GFL11-2M 2C GFL09-2M 2C GFL11-2M 2C GFL09-2M 2C GFL11-2M 2C GFL-2M 2C GFL09-2M 2C GFL11-2M 2C GFL-2M 2C GFL09-2M 2C GFL11-2M 2C GFL11-2M 2C GFL-2M 2C32-123

134 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 9.2 kw nn 50 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL11-2M 2C GFL-2M 2C GFL11-2M 2C GFL-2M 2C GFL-3M 2C GFL-3M 2C GFL11-2M 2C GFL-2M 2C GFL-3M 2C GFL-2M 2C GFL-3M 2C GFL-2M 2C GFL-3M 2C GFL-3M 2C GFL-3M 2C GFL-3M 2C GFL-3M 2C GFL-3M 2C32-124

135 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 1 kw nn 60 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL07-2M 0C GFL07-2M 0C GFL07-2M 0C GFL07-2M 0C GFL07-2M 0C GFL07-2M 0C GFL07-2M 0C GFL07-2M 0C GFL07-2M 0C GFL09-2M 0C GFL07-2M 0C GFL09-2M 0C GFL07-2M 0C GFL07-2M 0C GFL09-2M 0C GFL07-2M 0C GFL09-2M 0C GFL07-2M 0C GFL11-2M 0C GFL09-2M 0C GFL09-2M 0C GFL11-2M 0C GFL09-2M 0C GFL11-2M 0C GFL09-2M 0C GFL11-2M 0C GFL09-2M 0C GFL11-2M 0C GFL11-2M 0C GFL11-2M 0C GFL11-2M 0C GFL11-2M 0C GFL-2M 0C GFL-2M 0C GFL-2M 0C GFL-3M 0C GFL-3M 0C GFL-2M 0C GFL-3M 0C GFL-3M 0C22-125

136 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 15.0 kw nn 60 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL07-2M 0C GFL07-2M 0C GFL07-2M 0C GFL07-2M 0C GFL07-2M 0C GFL09-2M 0C GFL07-2M 0C GFL09-2M 0C GFL07-2M 0C GFL09-2M 0C GFL07-2M 0C GFL07-2M 0C GFL09-2M 0C GFL09-2M 0C GFL07-2M 0C GFL09-2M 0C GFL11-2M 0C GFL07-2M 0C GFL07-2M 0C GFL09-2M 0C GFL11-2M 0C GFL11-2M 0C GFL09-2M 0C GFL11-2M 0C GFL09-2M 0C GFL09-2M 0C GFL11-2M 0C GFL09-2M 0C GFL11-2M 0C GFL09-2M 0C GFL11-2M 0C GFL09-2M 0C GFL11-2M 0C GFL-2M 0C GFL11-2M 0C GFL-2M 0C GFL11-2M 0C GFL-2M 0C GFL11-2M 0C GFL-2M 0C32-126

137 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 15.0 kw nn 60 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL11-2M 0C GFL-2M 0C GFL-2M 0C GFL-2M 0C GFL-3M 0C GFL-3M 0C GFL-2M 0C GFL-3M 0C32-127

138 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 18.5 kw nn 70 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL09-2M 180C GFL09-2M 180C GFL09-2M 180C GFL09-2M 180C GFL11-2M 180C GFL09-2M 180C GFL09-2M 180C GFL11-2M 180C GFL09-2M 180C GFL11-2M 180C GFL11-2M 180C GFL09-2M 180C GFL11-2M 180C GFL09-2M 180C GFL09-2M 180C GFL11-2M 180C GFL09-2M 180C GFL11-2M 180C GFL09-2M 180C GFL-2M 180C GFL11-2M 180C GFL09-2M 180C GFL-2M 180C GFL11-2M 180C GFL-2M 180C GFL11-2M 180C GFL-2M 180C GFL11-2M 180C GFL-2M 180C GFL11-2M 180C GFL-2M 180C GFL11-2M 180C GFL-2M 180C GFL-2M 180C GFL-2M 180C GFL-2M 180C12-128

139 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 2 kw nn 65 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL09-2M 180C GFL11-2M 180C GFL09-2M 180C GFL11-2M 180C GFL-2M 180C GFL09-2M 180C GFL11-2M 180C GFL-2M 180C GFL09-2M 180C GFL11-2M 180C GFL11-2M 180C GFL09-2M 180C GFL09-2M 180C GFL11-2M 180C GFL-2M 180C GFL09-2M 180C GFL11-2M 180C GFL-2M 180C GFL11-2M 180C GFL09-2M 180C GFL-2M 180C GFL11-2M 180C GFL09-2M 180C GFL09-2M 180C GFL-2M 180C GFL11-2M 180C GFL09-2M 180C GFL-2M 180C GFL11-2M 180C GFL09-2M 180C GFL-2M 180C GFL11-2M 180C GFL-2M 180C GFL11-2M 180C GFL-2M 180C GFL11-2M 180C GFL-2M 180C GFL11-2M 180C GFL-2M 180C GFL11-2M 180C32-129

140 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 2 kw nn 65 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL-2M 180C GFL-2M 180C GFL-2M 180C GFL-2M 180C GFL-2M 180C32-0

141 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 30.0 kw nn 65 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL09-2M 180C GFL11-2M 180C GFL09-2M 180C GFL11-2M 180C GFL-2M 180C GFL09-2M 180C GFL11-2M 180C GFL-2M 180C GFL09-2M 180C GFL11-2M 180C GFL11-2M 180C GFL09-2M 180C GFL09-2M 180C GFL11-2M 180C GFL-2M 180C GFL09-2M 180C GFL11-2M 180C GFL-2M 180C GFL11-2M 180C GFL-2M 180C GFL11-2M 180C GFL-2M 180C GFL11-2M 180C GFL-2M 180C GFL11-2M 180C GFL-2M 180C GFL11-2M 180C GFL-2M 180C GFL11-2M 180C GFL-2M 180C GFL-2M 180C GFL-2M 180C GFL-2M 180C GFL-2M 180C GFL-2M 180C GFL-2M 180C42-1

142 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 37.0 kw nn 75 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL11-2M 225C GFL11-2M 225C GFL-2M 225C GFL11-2M 225C GFL-2M 225C GFL11-2M 225C GFL11-2M 225C GFL-2M 225C GFL11-2M 225C GFL-2M 225C GFL-2M 225C GFL11-2M 225C GFL-2M 225C GFL11-2M 225C GFL-2M 225C GFL11-2M 225C GFL-2M 225C GFL11-2M 225C GFL-2M 225C GFL-2M 225C GFL-2M 225C GFL-2M 225C GFL-2M 225C12-2

143 GFL shaft-ounted helial gearboxes Tehnial data Seletion tables 50 Hz, 60 Hz: PN = 45.0 kw nn 80 r/in fn 50 Hz [r/in] [N] r/in 60 Hz i [r/in] [N] GFL11-2M 225C GFL-2M 225C GFL11-2M 225C GFL-2M 225C GFL-2M 225C GFL11-2M 225C GFL-2M 225C GFL11-2M 225C GFL11-2M 225C GFL-2M 225C GFL11-2M 225C GFL-2M 225C GFL-2M 225C GFL11-2M 225C GFL-2M 225C GFL11-2M 225C GFL-2M 225C GFL-2M 225C GFL-2M 225C GFL-2M 225C GFL-2M 225C GFL-2M 225C GFL-2M 225C22-3

144 GFL shaft-ounted helial gearboxes Tehnial data Diensions GFL -2M H R k 063C11 063C42 071C11 071C 080C11 080C 090C11 090C31 090C32 100C12 063C12 071C31 080C31 063C31 071C32 080C32 063C32 071C33 080C33 071C42 080C42 g g 1 MDEMAXX MDEMABR MDEMAXX k MDEMABR Δ k MDFMAXX MDFMABR GFL k 354 GFL GFL GFL GFL GFL

145 GFL shaft-ounted helial gearboxes Tehnial data k 100C31 100C32 112C22 112C32 2C21 0C22 0C32 180C12 180C42 225C12 100C41 112C31 112C41 2C22 180C32 225C22 2C32 g g 1 MDEMAXX MDEMABR MDEMAXX k MDEMABR Δ k MDFMAXX MDFMABR k GFL GFL GFL GFL GFL GFL a a 4 a 7 a 8 6 k 6 k 7 o 1) p 1) p 1 s 6 GFL GFL GFL GFL GFL GFL GFL d 2) d 1 l l 1 u t i 1 o 1 a 1 b 1 e 1 f 1 s 1 GFL04 GFL05 GFL06 GFL07 GFL09 GFL11 GFL H ) k 2! 2) Not suitable for through ahine shaft at otor end: GFL04-2M H 080C ; d=30 GFL05-2M H 100C ; d=35 GFL06-2M H 2C ; d=40/45 GFL07-2M H 0C ; d=50/55 GFL11-2M H 225C ; d= JS , H M6x12 M8x M10x M12x18 Mx24 0x32 4x35-5

146 GFL shaft-ounted helial gearboxes Tehnial data Diensions GFL -2M HCK k 063C11 063C42 071C11 071C 080C11 080C 090C11 090C31 090C32 100C12 063C12 071C31 080C31 063C31 071C32 080C32 063C32 071C33 080C33 071C42 080C42 g g 1 MDEMAXX MDEMABR MDEMAXX k MDEMABR Δ k MDFMAXX MDFMABR GFL k 387 GFL GFL GFL GFL GFL

147 GFL shaft-ounted helial gearboxes Tehnial data k 100C31 100C32 112C22 112C32 2C21 0C22 0C32 180C12 180C42 225C12 100C41 112C31 112C41 2C22 180C32 225C22 2C32 g g 1 MDEMAXX MDEMABR MDEMAXX k MDEMABR Δ k MDFMAXX MDFMABR k GFL GFL GFL GFL GFL GFL a a 4 k 8 o 1) p 1) p 1 GFL GFL GFL GFL GFL GFL GFL d 2) d 1 l l 1 u t i 2 o 1 a 2 b 2 2 e 2 f 2 s 2 GFL04 GFL05 GFL06 GFL07 GFL09 GFL11 GFL H JS , j x 9 4 x 11 4 x 4 x 4 x 4 x x x x ) k 2! 2) Not suitable for through ahine shaft at otor end: GFL04-2M H 080C ; d=30 GFL05-2M H 100C ; d=35 GFL06-2M H 2C ; d=40/45 GFL07-2M H 0C ; d=50/55 GFL11-2M H 225C ; d=80-7

148 GFL shaft-ounted helial gearboxes Tehnial data Diensions GFL -2M V R k 063C11 063C42 071C11 071C 080C11 080C 090C11 090C31 090C32 100C12 063C12 071C31 080C31 063C31 071C32 080C32 063C32 071C33 080C33 071C42 080C42 g g 1 MDEMAXX MDEMABR MDEMAXX k MDEMABR Δ k MDFMAXX MDFMABR k GFL GFL GFL GFL GFL GFL

149 GFL shaft-ounted helial gearboxes Tehnial data k 100C31 100C32 112C22 112C32 2C21 0C22 0C32 180C12 180C42 225C12 100C41 112C31 112C41 2C22 180C32 225C22 2C32 g g 1 MDEMAXX MDEMABR MDEMAXX k MDEMABR Δ k MDFMAXX MDFMABR k GFL GFL GFL GFL GFL GFL a a 4 a 7 a 8 6 k 6 k 7 o 1) p 1) p 1 s 6 GFL GFL GFL GFL GFL GFL GFL d d d 1 d 2 l l 1 l 2 u t o 1 a 1 b 1 e 1 f 1 s 1 k6 6 H7 GFL M M6x12 GFL M M8x GFL M M10x GFL M M12x18 GFL Mx24 GFL x32 GFL x35 1) k 2! - 9

150 GFL shaft-ounted helial gearboxes Tehnial data Diensions GFL -2M VCK k 063C11 063C42 071C11 071C 080C11 080C 090C11 090C31 090C32 100C12 063C12 071C31 080C31 063C31 071C32 080C32 063C32 071C33 080C33 071C42 080C42 g g 1 MDEMAXX MDEMABR MDEMAXX k MDEMABR Δ k MDFMAXX MDFMABR k GFL GFL GFL GFL GFL GFL

151 GFL shaft-ounted helial gearboxes Tehnial data k 100C31 100C32 112C22 112C32 2C21 0C22 0C32 180C12 180C42 225C12 100C41 112C31 112C41 2C22 180C32 225C22 2C32 g g 1 MDEMAXX MDEMABR MDEMAXX k MDEMABR Δ k MDFMAXX MDFMABR k GFL GFL GFL GFL GFL GFL a a 4 k 8 o 1) p 1) p 1 GFL GFL GFL GFL GFL GFL GFL d d d 1 d 2 l l 1 l 2 u t i 2 o 1 a 2 b 2 2 e 2 f 2 s 2 k6 6 j7 GFL04 GFL05 GFL06 GFL07 GFL09 GFL11 GFL M10 M10 M M x 9 4 x 11 4 x 4 x 4 x 4 x x x x ) k 2! - 1

152 GFL shaft-ounted helial gearboxes Tehnial data Diensions GFL -3M H R k 063C11 063C42 071C11 080C11 080C32 090C11 090C32 100C12 063C12 071C 080C 080C33 090C31 100C31 063C31 071C31 080C31 080C42 063C32 071C32 071C33 071C42 g g 1 MDEMAXX MDEMABR MDEMAXX k MDEMABR Δ k MDFMAXX MDFMABR k GFL GFL GFL GFL GFL GFL

153 GFL shaft-ounted helial gearboxes Tehnial data k 100C32 100C41 112C22 112C32 112C41 2C21 0C22 112C31 2C22 2C32 g g 1 MDEMAXX MDEMABR MDEMAXX k MDEMABR Δ k MDFMAXX MDFMABR k GFL GFL GFL GFL C a a 4 a 7 a 8 6 k 6 k 7 o 1) o 2 o 3 o 4 p 1) p 1 s 6 GFL GFL GFL GFL GFL GFL d d 1 l l 1 u t i 1 o 1 a 1 b 1 e 1 f 1 s 1 GFL05 GFL06 GFL07 GFL09 GFL11 GFL H JS , H M8x M10x M12x18 Mx24 0x32 4x35 1) k 2! - 3

154 GFL shaft-ounted helial gearboxes Tehnial data Diensions GFL -3M HCK k 063C11 063C42 071C11 080C11 080C32 090C11 090C32 100C12 063C12 071C 080C 080C33 090C31 100C31 063C31 071C31 080C31 080C42 063C32 071C32 071C33 071C42 g g 1 MDEMAXX MDEMABR MDEMAXX k MDEMABR Δ k MDFMAXX MDFMABR k GFL GFL GFL GFL GFL GFL

155 GFL shaft-ounted helial gearboxes Tehnial data k 100C32 100C41 112C22 112C32 112C41 2C21 0C22 112C31 2C22 2C32 g g 1 MDEMAXX MDEMABR MDEMAXX k MDEMABR Δ k MDFMAXX MDFMABR k GFL GFL GFL GFL C a a 4 k 8 o 1) o 2 o 3 o 4 p 1) p 1 GFL GFL GFL GFL GFL GFL d d 1 l l 1 u t i 2 o 1 a 2 b 2 2 e 2 f 2 s 2 GFL05 GFL06 GFL07 GFL09 GFL11 GFL H JS , j x 11 4 x 4 x 4 x 4 x x x x ) k 2! - 5

156 GFL shaft-ounted helial gearboxes Tehnial data Diensions GFL -3M V R k 063C11 063C42 071C11 080C11 080C32 090C11 090C32 100C12 063C12 071C 080C 080C33 090C31 100C31 063C31 071C31 080C31 080C42 063C32 071C32 071C33 071C42 g g 1 MDEMAXX MDEMABR MDEMAXX k MDEMABR Δ k MDFMAXX MDFMABR k GFL GFL GFL GFL GFL GFL

157 GFL shaft-ounted helial gearboxes Tehnial data k 100C32 100C41 112C22 112C32 112C41 2C21 0C22 112C31 2C22 2C32 g g 1 MDEMAXX MDEMABR MDEMAXX k MDEMABR Δ k MDFMAXX MDFMABR k GFL GFL GFL GFL C a a 4 a 7 a 8 6 k 6 k 7 o 1) o 2 o 3 o 4 p 1) p 1 s 6 GFL GFL GFL GFL GFL GFL d d d 1 d 2 l l 1 l 2 u t o 1 a 1 b 1 e 1 f 1 s 1 k6 6 H7 GFL M M8x GFL M M10x GFL M M12x18 GFL Mx24 GFL x32 GFL x35 1) k 2! - 7

158 GFL shaft-ounted helial gearboxes Tehnial data Diensions GFL -3M VCK k 063C11 063C42 071C11 080C11 080C32 090C11 090C32 100C12 063C12 071C 080C 080C33 090C31 100C31 063C31 071C31 080C31 080C42 063C32 071C32 071C33 071C42 g g 1 MDEMAXX MDEMABR MDEMAXX k MDEMABR Δ k MDFMAXX MDFMABR k GFL GFL GFL GFL GFL GFL

159 GFL shaft-ounted helial gearboxes Tehnial data k 100C32 100C41 112C22 112C32 112C41 2C21 0C22 112C31 2C22 2C32 g g 1 MDEMAXX MDEMABR MDEMAXX k MDEMABR Δ k MDFMAXX MDFMABR k GFL GFL GFL GFL C a a 4 k 8 o 1) o 2 o 3 o 4 p 1) p 1 GFL GFL GFL GFL GFL GFL d d d 1 d 2 l l 1 l 2 u t i 2 o 1 a 2 b 2 2 e 2 f 2 s 2 GFL05 GFL06 GFL07 GFL09 GFL11 GFL k M10 M M j x 11 4 x 4 x 4 x 4 x x x x ) k 2! - 9

160 GFL shaft-ounted helial gearboxes Tehnial data - 150

161 GFL shaft-ounted helial gearboxes Aessories Hollow shaft with shrink dis d 1) h6 g 2 g 3 g 4 i 1 k 9 k 10 k 11 k 12 l l 1 l 4 GFL04 GFL04 GFL GFL06 GFL GFL GFL GFL ) Mahine shaft design. ƒ ƒ Output flange and hollow shaft with shrink dis (design S K) is only possible with shrink dis in position 1. Not suitable for through ahine shaft at otor end: GFL04-2M S 080C ; d=30 GFL05-2M S 100C ; d=35 GFL06-2M S 2C ; d=40 GFL07-2M S 0C ; d=50 GFL11-2M S 225C ; d=80-151

162 GFL shaft-ounted helial gearboxes Aessories Hollow shaft with shrink dis ƒ Ensure that the strength of the ahine shaft aterial is adequate in shrink dis designs. When using typial steels, e.g. C45, 42CrMo4, the torques listed in the seletion tables an be used without restrition. Please onsult us if you wish to use aterial that is onsiderably weaker. Mediu surfae roughness Rz ust not exeed 15 µ (turning is suffiient). Cobination options with shrink dis in position 1 (drive end) GFL -2M 1) Only possible without over Gearbox GFL04 Motor frae size 063 GFL05 1) 071 1) GFL ) 100 1) GFL ) GFL GFL GFL ƒ For geared otors GFL -2M/E S... with shrink dis position 1: terinal box position / ote position 4 not possible! - 152

163 GFL shaft-ounted helial gearboxes Aessories Mounting set for hollow shaft irlip: Proposed design for auxiliary tools d l 1 d 2 l l 8, ax H7 GFL04 GFL M10 M GFL M GFL07 GFL09 GFL GFL

164 GFL shaft-ounted helial gearboxes Aessories Foot ounting in position 3 GFL04 GFL05 GFL06 GFL07 GFL09 GFL11 GFL a 5 a 6 b 6 5 e 5 f 6 h 1 i i 3 i 4 i 5 n s Foot design is not available for the following obinations: GFL04: Motor frae size 090 GFL05: Motor frae size 090 GFL05: Motor frae size 100 GFL06: Motor frae size 112 GFL06: Motor frae size 2 GFL07: Motor frae size 0-154

165 GFL shaft-ounted helial gearboxes Aessories Foot ounting in position 4 GFL04 GFL05 GFL06 GFL07 GFL09 GFL11 GFL a 5 b 5 5 e 5 f 5 h i i 3 i 4 i 5 n s ƒ In ounting positions E and F, the oil hek bore hole/oil-sight glass are loated between the feet in position 4! - 155

166 GFL shaft-ounted helial gearboxes Aessories Rubber buffer for torque plate d D 7 GFL GFL GFL GFL GFL GFL GFL

167 GFL shaft-ounted helial gearboxes Aessories Ventilations Position of ventilation, sealing eleents and oil level hek GFL05-2 A to F Mounting position Ite 1 standard Ventilation / Oil filler plug Ite 2 only with: Oil drain plug GFL05-2M 090C Oil ontrol plug GFL05-2M 100C * On both sides GFL06-2M 112C ** On opposite side GFL07-2M 0C - 157

168 GFL shaft-ounted helial gearboxes Aessories Ventilations Position of ventilation, sealing eleents and oil level hek GFL05-3 A to F Mounting position Ite 1 standard Ventilation / Oil filler plug Ite 2 only with: Oil drain plug GFL07-3M 090C Oil ontrol plug GFL07-3M 100C * On both sides GFL09-3M 112C ** On opposite side - 158

169 GFL shaft-ounted helial gearboxes Aessories Ventilations Copensation reservoir for ounting position C GFL -2 Motor o 5 o 6 o 7 o 8 o 9 o 5 o 6 o 7 o 8 o 9 GFL09 [] 5 [] 344 [] 405 [] 464 [] 525 [] 187 [] 344 [] 405 [] 464 [] 525 GFL GFL Motor o 5 o 6 o 7 o 8 o 9 o 5 o 6 o 7 o 8 o 9 [] [] [] [] [] [] [] [] [] [] GFL GFL GFL ƒ ƒ Terinal box position 3 not peritted. Foot in position 3 not peritted

170 GFL shaft-ounted helial gearboxes Aessories - 0

171 Motors MD three-phase AC otors 0.06 to 45 kw

172

173 MD three-phase AC otors Contents General inforation Tehnial data Aessories List of abbreviations Produt key Produt inforation Funtions and features Motor inverter assignent Diensioning Standards and operating onditions Rated data for 50 Hz Rated data for 60 Hz Rated data for 87 Hz Diensions, self-ventilated (2-pole) Diensions, self-ventilated (4-pole) Diensions, self-ventilated (6-pole) Diensions, fored ventilated (2-pole) Diensions, fored ventilated (4-pole) Diensions, fored ventilated (6-pole) Diensions, 8400 ote inverter Spring-applied brake Resolver Inreental enoder and SinCos absolute value enoder Blowers Teperature onitoring Terinal box Plug onnetors ICN onnetor M12 onnetor HAN onnetor Handwheel Centrifugal ass 2nd shaft end Protetion over

174 MD three-phase AC otors General inforation List of abbreviations η 100 % η 75 % η 50 % os ϕ I N I ax J M a M b M ax M N n N P N P ax [%] [%] [%] [A] [A] [kg²] [N] [N] [N] [N] [r/in] [kw] [kw] Effiieny Effiieny Effiieny Power fator Rated urrent Max. urrent onsuption Moent of inertia Mass Starting torque Stalling torque Max. torque Rated torque Rated speed Rated power Max. power input U ax U in U N, Δ U N, Y [V] [V] [V] [V] Max. ains voltage Min. ains voltage Rated voltage Rated voltage CE CSA DIN EMC EN IEC IM IP NEMA UL UR VDE CCC GOST URus UkrSEPRO Counauté Européenne Canadian Standards Assoiation Deutshes Institut für Norung e.v. Eletroagneti opatibility European standard International Eletrotehnial Coission International Mounting Code International Protetion Code National Eletrial Manufaturers Assoiation Underwriters Laboratory Listed Produt Underwriters Laboratory Reognized Produt Verband deutsher Elektrotehniker (Assoiation of Geran Eletrial Engineers) China Copulsory Certifiate Certifiate for Russian Federation Cobined ertifiation arks of UL for the USA and Canada Certifiate for Ukraine V01-en_GB-02/20

175 MD three-phase AC otors General inforation Produt key 6.11 V01-en_GB-02/

176 MD three-phase AC otors General inforation Produt inforation Speial otors have been designed for diret attahent to Lenze gearboxes. These otors are attahed to the gearbox without the use of a luth. Torque transission between the toothing and the otor shaft is frition-loked via a tapered onnetion here. This otor design eans that the geared otors only require a sall installation spae. L-fore MD three-phase AC otors are available in a power range fro 0.06 to 45 kw and oply with effiieny lass 4IE1 (standard effiieny) as per IEC Basi versions The theral sensors integrated as standard allow for peranent teperature onitoring and are oordinated to the otor winding's teperature lass F (155 C). The otors of the basi version are adapted to abient onditions by enlosure IP55. In tough operating onditions, the surfae and orrosion protetion syste is provided to reliably protet the otor fro orrosive edia. Options Various brake sizes eah available with several braking torques an be obined with the three-phase AC otors. The LongLife version of the brake an easily reah 10 x 10 6 swithing yles. A resolver and various inreental and absolute value enoders an be fitted for speed and position detetion. For fast oissioning, the otors are also available with onnetors for the power onnetion, brake, blower and feedbak. Instead of an integral fan, the otor an optionally be equipped with a blower. No torque redution is then neessary, even at speeds below 20 Hz. For drive tasks in deentralised appliations, the otor an be ordered with the ote inverter onneted to the terinal box. The otors are available with URus, GOST-R, CCC and UkrSepro approval. Sooth start/braking is possible by inreasing the otor's entrifugal ass with a ast iron fan. The otor an be equipped with a handwheel for anual setup or eergeny operations. To protet the fan fro falling objets, the fan over an be equipped with a protetion over. A 2nd shaft end is available for further odifiations V01-en_GB-02/20

177 MD three-phase AC otors General inforation Funtions and features Size Motor Spring-applied brake Design Feedbak Design Theral sensor Theral ontat Theral detetor PTC theristor Motor onnetion Power onnetion Brake onnetion Blower onnetion Feedbak onnetion Teperature sensor onnetion Shaft bearings Position of the loating bearing Bearing type Colour Further options Standard or LongLife design Redued or standard braking torque With retifier With anual release lever Low noise 080 Resolver 1) Inreental enoder 1) Absolute value enoder (ulti-turn) 1) TKO KTY KTY84-0 PTC Terinal box ICN onnetor HAN10E onnetor HAN odular onnetor Terinal box ICN onnetor HAN odular onnetor HAN10E onnetor Terinal box ICN onnetor Terinal box ICN onnetor Terinal box TKO or PTC at onnetor in the power onnetion KTY at onnetor in the feedbak onnetion Standard otors (B3, B5, B): side B Motors for gearbox diret ounting: side A 090 Standard or LongLife design Redued, standard or inreased braking torque With retifier With anual release lever Low noise Deep-groove ball bearing with high-teperature resistant grease, 2 sealing diss or over plates Protetion over Not oated Pried Paint in various orrosion-protetion designs in aordane with RAL olours Protetion over Inreased entrifugal ass Handwheel 1) 2nd shaft end 1) With 2-pole otors not available V01-en_GB-02/

178 MD three-phase AC otors General inforation Funtions and features Size Motor Spring-applied brake Design Feedbak Design Theral sensor Theral ontat Theral detetor PTC theristor Motor onnetion Power onnetion Brake onnetion Blower onnetion Feedbak onnetion Teperature sensor onnetion Shaft bearings Position of the loating bearing Bearing type Colour Further options 100 Standard or LongLife design Redued, standard or inreased braking torque With retifier With anual release lever Low noise Standard design Redued, standard or inreased braking torque With retifier With anual release lever Low noise Resolver 1) Inreental enoder 1) Absolute value enoder (ulti-turn) 1) Terinal box ICN onnetor HAN10E onnetor HAN odular onnetor Terinal box ICN onnetor HAN odular onnetor HAN10E onnetor TKO KTY KTY84-0 PTC Terinal box ICN onnetor Terinal box ICN onnetor Terinal box TKO or PTC at onnetor in the power onnetion KTY at onnetor in the feedbak onnetion Standard otors (B3, B5, B): side B Motors for gearbox diret ounting: side A Terinal box ICN onnetor HAN odular onnetor Terinal box ICN onnetor HAN odular onnetor Deep-groove ball bearing with high-teperature resistant grease, 2 sealing diss or over plates Not oated Pried Paint in various orrosion-protetion designs in aordane with RAL olours Protetion over Inreased entrifugal ass Handwheel 1) 2nd shaft end 1) With 2-pole otors not available V01-en_GB-02/20

179 MD three-phase AC otors General inforation Funtions and features Size Motor Spring-applied brake Design Feedbak Design Theral sensor Theral ontat Theral detetor PTC theristor Motor onnetion Power onnetion Brake onnetion Blower onnetion Feedbak onnetion Teperature sensor onnetion Shaft bearings Position of the loating bearing Bearing type Colour Further options 0 Terinal box HAN odular onnetor Terinal box HAN odular onnetor Terinal box TKO or PTC at onnetor in the power onnetion KTY at onnetor in the feedbak onnetion 180 Standard design Redued, standard or inreased braking torque With retifier With anual release lever Low noise Resolver Inreental enoder Absolute value enoder (ulti-turn) TKO KTY KTY84-0 PTC Terinal box ICN onnetor Terinal box ICN onnetor Standard otors (B3, B5, B): side B Motors for gearbox diret ounting: side A Terinal box Terinal box Terinal box 225 Drive end Deep-groove ball bearing with high-teperature resistant grease, 2 sealing diss or over plates Not oated Pried Paint in various orrosion-protetion designs in aordane with RAL olours Protetion over 6.11 V01-en_GB-02/

180 MD three-phase AC otors General inforation Funtions and features Surfae and orrosion protetion For optiu protetion of three-phase AC otors against abient onditions, the surfae and orrosion protetion syste (OKS) offers tailor-ade solutions. Various surfae oatings ensure that the otors operate reliably even at high air huidity, in outdoor installation or in the presene of atospheri ipurities. Any olour fro the RAL Classi olletion an be hosen for the top oat. The three-phase AC otors are also available unpainted (no surfae and orrosion protetion). Surfae and orrosion protetion syste OKS-G (pried) OKS-S (sall) OKS-M (ediu) OKS-L (high) Appliations Measures Dependent on subsequent top oat applied 2K PUR priing oat (grey) Standard appliations Internal installation in heated buildings Air huidity up to 90% Internal installation in non-heated buildings Covered, proteted external installation Air huidity up to 95% External installation Air huidity above 95% Cheial industry plants Food industry Surfae oating as per orrosivity ategory C1 (in line with EN ) Surfae oating as per orrosivity ategory C2 (in line with EN ) Surfae oating as per orrosivity ategory C3 (in line with EN ) Blower over and B end shield additionally pried Srews zin-oated Cable glands with gaskets Corrosion-resistant brake with over ring, stainless frition plate, and hroe-plated arature plate (on request) Optional easures: Motor reesses sealed off (on request) Struture of surfae oating Surfae and orrosion protetion syste Corrosivity ategory DIN EN ISO Surfae oating Struture Colour Without OKS (unoated) OKS-G (pried) OKS-S (sall) OKS-M (ediu) OKS-L (high) C1 C2 C3 2K PUR priing oat 2K-PUR top oat 2K PUR priing oat 2K-PUR top oat Standard: RAL 7012 Optional: RAL Classi V01-en_GB-02/20

181 MD three-phase AC otors General inforation Motor inverter assignent Rated frequeny 50/60 Hz ƒ ƒ Deentralised inverter 8400 ote (E84DVB) Inverter Drives 8400 (E84AV) Rated power Motor Produt key Inverter P N [kw] 0.12 MD MD MD MD E84DVB 37S MD E84DVB 55S MD E84DVB 75S 2 0 MD E84DVB 1124S 2 0 MD E84DVB 1524S 2 0 MD E84DVB 2224S MD E84DVB 3024S MD E84DVB 4024S MD E84DVB 5524S MD 2-22 E84DVB 7524S 2 1 MD MD MD MD MD MD MD V01-en_GB-02/

182 MD three-phase AC otors General inforation Motor inverter assignent Rated frequeny 87 Hz ƒ ƒ Deentralised inverter 8400 ote (E84DVB) Inverter Drives 8400 (E84AV) Rated power Motor Produt key Inverter P N [kw] 0.21 MD MD MD E84DVB 55S MD E84DVB 75S 2 0 MD E84DVB 1124S 2 5 MD E84DVB 1524S 2 0 MD E84DVB 2224S 2 0 MD E84DVB 3024S MD E84DVB 4024S MD E84DVB 5524S MD E84DVB 7524S MD MD MD MD MD MD V01-en_GB-02/20

183 MD three-phase AC otors General inforation Diensioning Torque derating at low otor frequenies Motor size-dependent torque redution, taking into aount the theral response during operation on the inverter. Torque harateristis A = Operation with integral fan and brake B = Operation with integral fan and brake ontrol "Holding urrent redution" ƒ The otor speifiations stated in this atalogue for inverter operation apply to operation with a Lenze inverter. If you are unertain, get in touh with the anufaturer of the inverter to ask whether the devie is apable of driving the otor with the stated speifiations (e.g. setting range, base frequeny). You an use the Drive Solution Designer for preise drive diensioning. The Drive Solution Designer helps you to arry out a fast and highquality drive diensioning. The software inludes well-founded and proven knowledge on drive appliations and eletro-ehanial drive oponents Please ontat your Lenze sales offie. V01-en_GB-02/

184 MD three-phase AC otors General inforation V01-en_GB-02/20

185 MD three-phase AC otors Tehnial data Standards and operating onditions Enlosure EN Energy effiieny lass IEC IEC Approval Class Teperature lass IEC/EN ; utilisation IEC/EN ; insulation syste (enael-insulated wire) Min. abient operating teperature Max. abient operating teperature With power redution Site altitude Asl Max. speed T opr,in [ C] IP55 IE1 1) Methodology for easuring effiieny URus 2) CCC GOST-R UkrSepro B F -20 T opr,ax [ C] 40 T opr,ax [ C] 60 H ax n ax [] [r/in] ) Only applies to 4-pole otors. 2) Motor frae size 225, in preparation. ƒ In the European Union, the ErP Diretive stipulates iniu effiieny levels for three-phase AC otors. Geared three-phase AC otors that do not onfor with this Diretive do not eet CE requireents and ust not be arketed in the European Eonoi Area. For further inforation about the ErP Diretive and the Lenze produts to whih it relates, please refer to the brohure entitled "International effiieny diretives for threephase AC otors" V01-en_GB-02/

186 MD three-phase AC otors Tehnial data Rated data for 50 Hz 2-pole otors P N n N U N, Δ I N, Δ U N, Y ± 10 % ± 10 % [kw] [r/in] [V] [A] [V] I N, Y [A] I a /I N MD MD MD MD MD MD MD MD MD MD MD ) MD ) MD ) M N M a M b os ϕ η 75 % η 100 % J 1) 1) [N] [N] [N] [%] [%] [kg²] MD MD MD MD MD MD MD MD MD MD MD MD MD ) Without aessories 2) Star/delta start-up possible at 400 V V01-en_GB-02/20

187 MD three-phase AC otors Tehnial data Rated data for 50 Hz 4-pole otors P U 2) N n N N, Δ I N, Δ U N, Y ± 10 % I N, Y I a /I N ± 10 % [kw] [r/in] [V] [A] [V] [A] MD MD MD MD MD MD MD MD MD MD MD MD MD MD MD 2-22 MD ) ) ) M N [N] M a [N] M b [N] os ϕ η 75 % [%] η 100 % [%] J 1) [kg²] 1) MD MD MD MD MD MD MD MD MD MD MD MD MD MD MD MD ) Without aessories 2) Operation at 87 Hz is possible with 4-pole otors whose rated data at 50 Hz displays the voltage values Δ 230 V. With otor frae sizes 2-12 to , the required voltage ust also be speified in your order. 3) Star/delta start-up possible at 400 V. V01-en_GB-02/

188 MD three-phase AC otors Tehnial data Rated data for 50 Hz 4-pole otors P U 2) N n N N, Δ I N, Δ U N, Y ± 10 % I N, Y I a /I N ± 10 % [kw] [r/in] [V] [A] [V] [A] MD 0-22 MD 0-32 MD MD MD MD MD ) ) ) ) ) ) ) M N [N] M a [N] M b [N] os ϕ η 75 % [%] η 100 % [%] J 1) [kg²] 1) MD MD MD MD MD MD MD ) Without aessories 2) Operation at 87 Hz is possible with 4-pole otors whose rated data at 50 Hz displays the voltage values Δ 230 V. With otor frae sizes 2-12 to , the required voltage ust also be speified in your order. 3) Star/delta start-up possible at 400 V V01-en_GB-02/20

189 MD three-phase AC otors Tehnial data Rated data for 50 Hz 6-pole otors P N n N U N, Δ I N, Δ U N, Y ± 10 % ± 10 % [kw] [r/in] [V] [A] [V] I N, Y [A] I a /I N MD MD MD MD M N M a M b os ϕ η 75 % η 100 % J 1) 1) [N] [N] [N] [%] [%] [kg²] MD MD MD MD ) Without aessories 6.11 V01-en_GB-02/

190 MD three-phase AC otors Tehnial data Rated data for 60 Hz 2-pole otors ƒ The otors are designed for an operation at 265/460 V but are also able to be operated at 230 V, 60 Hz. The sae tehnial data apply, the starting torque is a bit lower. ƒ The otors have a servie fator of 5 at 60 Hz. The servie fator indiates the perissible overload during operation within the ains voltage flutuations. P N n N U N, Δ I N, Δ U N, Y ± 10 % ± 10 % [kw] [r/in] [V] [A] [V] I N, Y [A] I a /I N MD MD MD MD MD MD MD MD MD MD MD ) MD ) MD ) M N M a M b os ϕ η 75 % η 100 % J 1) 1) [N] [N] [N] [%] [%] [kg²] MD MD MD MD MD MD MD MD MD MD MD MD MD ) Without aessories 2) Star/delta start-up possible at 460 V V01-en_GB-02/20

191 MD three-phase AC otors Tehnial data Rated data for 60 Hz 4-pole otors ƒ The otors are designed for an operation at 265/460 V but are also able to be operated at 230 V, 60 Hz. The sae tehnial data apply, the starting torque is a bit lower. ƒ The otors have a servie fator of 5 at 60 Hz. The servie fator indiates the perissible overload during operation within the ains voltage flutuations. P U 2) N n N N, Δ I N, Δ U N, Y ± 10 % I N, Y I a /I N ± 10 % [kw] [r/in] [V] [A] [V] [A] MD MD MD MD MD MD MD MD MD MD MD MD MD MD MD 2-22 MD ) ) ) M N [N] M a [N] M b [N] os ϕ η 75 % [%] η 100 % [%] J 1) [kg²] 1) MD MD MD MD MD MD MD MD MD MD MD MD MD MD MD MD ) Without aessories 2) Operation at 87 Hz is possible with 4-pole otors whose rated data at 60 Hz displays the voltage values Δ 265 V. With otor frae sizes to , the required voltage ust also be speified in your order. 3) Star/delta start-up possible at 460 V. V01-en_GB-02/

192 MD three-phase AC otors Tehnial data Rated data for 60 Hz 4-pole otors ƒ The otors are designed for an operation at 265/460 V but are also able to be operated at 230 V, 60 Hz. The sae tehnial data apply, the starting torque is a bit lower. ƒ The otors have a servie fator of 5 at 60 Hz. The servie fator indiates the perissible overload during operation within the ains voltage flutuations. P U 2) N n N N, Δ I N, Δ U N, Y ± 10 % I N, Y I a /I N ± 10 % [kw] [r/in] [V] [A] [V] [A] MD 0-22 MD 0-32 MD MD MD MD MD ) ) ) ) ) ) ) M N [N] M a [N] M b [N] os ϕ η 75 % [%] η 100 % [%] J 1) [kg²] 1) MD MD MD MD MD MD MD ) Without aessories 2) Operation at 87 Hz is possible with 4-pole otors whose rated data at 60 Hz displays the voltage values Δ 265 V. With otor frae sizes to , the required voltage ust also be speified in your order. 3) Star/delta start-up possible at 460 V V01-en_GB-02/20

193 MD three-phase AC otors Tehnial data Rated data for 60 Hz 6-pole otors ƒ The otors are designed for an operation at 265/460 V but are also able to be operated at 230 V, 60 Hz. The sae tehnial data apply, the starting torque is a bit lower. ƒ The otors have a servie fator of 5 at 60 Hz. The servie fator indiates the perissible overload during operation within the ains voltage flutuations. P N n N U N, Δ I N, Δ U N, Y ± 10 % ± 10 % [kw] [r/in] [V] [A] [V] I N, Y [A] I a /I N MD MD MD MD M N M a M b os ϕ η 75 % η 100 % J 1) 1) [N] [N] [N] [%] [%] [kg²] MD MD MD MD ) Without aessories 6.11 V01-en_GB-02/

194 MD three-phase AC otors Tehnial data Rated data for 87 Hz 4-pole otors P N n N M N M ax U N, Δ ± 10 % I N, Δ os ϕ η 75 % η 100 % J 1) 1) [kw] [r/in] [N] [N] [V] [A] [%] [%] [kg²] MD MD MD MD MD MD MD MD MD MD MD MD MD MD MD MD MD MD MD MD MD ) Without aessories V01-en_GB-02/20

195 MD three-phase AC otors Tehnial data Diensions, self-ventilated (2-pole) Motor type MDEMAXX MDEMABR MDEMABL MDEMALL Motor frae size Δ k Δ k Δ k Δ k [] [] [] [] V01-en_GB-02/

196 MD three-phase AC otors Tehnial data Diensions, self-ventilated (4-pole) Motor type MDEMAXX MDEMABR MDEMABS MDEMABI MDEMABA MDEMABL MDEMARS MDEMAIG MDEMAAG MDEMALL Motor frae size Δ k Δ k Δ k Δ k Δ k Δ k [] [] [] [] [] [] V01-en_GB-02/20

197 MD three-phase AC otors Tehnial data Diensions, self-ventilated (6-pole) Motor type MDEMAXX MDEMABR MDEMABS MDEMABI MDEMABA MDEMABL MDEMARS MDEMAIG MDEMAAG MDEMALL Motor frae size Δ k Δ k Δ k Δ k Δ k Δ k [] [] [] [] [] [] V01-en_GB-02/

198 MD three-phase AC otors Tehnial data Diensions, fored ventilated (2-pole) Motor type MDFMAXX MDFMABR Motor frae size Δ k Δ k k 4 g 3 2 n 3 P 6 [] [] [] [] [] [] [] x Mx V01-en_GB-02/20

199 MD three-phase AC otors Tehnial data Diensions, fored ventilated (4-pole) Motor type MDFMAXX MDFMABR MDFMABS MDFMABI MDFMABA MDFMARS MDFMAIG MDFMAAG Motor frae size Δ k Δ k Δ k Δ k k 4 g 3 2 n 3 P 6 [] [] [] [] [] [] [] [] [] x Mx 6.11 V01-en_GB-02/

200 MD three-phase AC otors Tehnial data Diensions, fored ventilated (6-pole) Motor type MDFMAXX MDFMABR MDFMABS MDFMABI MDFMABA MDFMARS MDFMAIG MDFMAAG Motor frae size Δ k Δ k Δ k Δ k k 4 g 3 2 n 3 P 6 [] [] [] [] [] [] [] [] [] x Mx V01-en_GB-02/20

201 MD three-phase AC otors Tehnial data Diensions, 8400 ote inverter Rated frequeny 50/60 Hz Produt key Motor Inverter g 1, 50Hz 1, 50Hz n 2, 50Hz x 50Hz [] [] [] [] MD MD E84DVB 37S 2 E84DVB 55S MD MD E84DVB 75S 2 E84DVB 1124S MD E84DVB 1524S MD MD E84DVB 2224S 2 E84DVB 3024S MD MD E84DVB 4024S 2 E84DVB 5524S MD 2-22 E84DVB 7524S V01-en_GB-02/

202 MD three-phase AC otors Tehnial data Diensions, 8400 ote inverter Rated frequeny 87 Hz Produt key Motor Inverter g 1, 87Hz 1, 87Hz n 2, 87Hz x 87Hz [] [] [] [] MD MD E84DVB 37S 2 E84DVB 55S MD MD E84DVB 75S 2 E84DVB 1124S MD E84DVB 1524S MD MD E84DVB 2224S 2 E84DVB 3024S MD MD E84DVB 4024S 2 E84DVB 5524S MD E84DVB 7524S V01-en_GB-02/20

203 MD three-phase AC otors Aessories Spring-applied brake Three-phase AC otors an be fitted with a spring-applied brake. This is ativated after the supply voltage is swithed off (losed-iruit priniple). For optiu adjustent of the brake otor to the appliation, a range of braking torques and ontrol odes is available for every otor frae size. For appliations with very high operating frequenies the brake is also available in a LongLife version, with reinfored ehanial brake oponents. Features Versions Control Standard DC supply - 1 x 10 6 repeating swithing yles AC supply via retifier in the terinal box - 1 x 10 6 reversing swithing yles LongLife Enlosure - 10 x 10 6 repeating swithing yles Without anual release IP55-15 x 10 6 reversing swithing yles With anual release IP54 Assignent of 4-pole otors and brakes Frition lining Non-asbestos, low wearing Options Manual release UL/CSA approval Noise-redued Design Standard LongLife Motor frae size Size Brake Rated torque Size Brake Rated torque M k M k [N] [N] V01-en_GB-02/

204 MD three-phase AC otors Aessories Spring-applied brake Assignent of 4-pole otors and brakes Design Standard LongLife Motor frae size Size Brake Rated torque Size Brake Rated torque M k M k [N] [N] V01-en_GB-02/20

205 MD three-phase AC otors Aessories Spring-applied brake Assignent of 4-pole otors and brakes Design Standard LongLife Motor frae size Size Brake Rated torque Size Brake Rated torque M k M k [N] [N] Assignent of 2-pole otors and brakes Design Standard LongLife Motor frae size Size Brake Rated torque Size Brake Rated torque M k [N] M k [N] V01-en_GB-02/

206 MD three-phase AC otors Aessories Spring-applied brake Diret onnetion without retifier If the brake is ativated diretly without a retifier, a freewheeling diode or a spark suppressor is required to protet against indution peaks. Supply voltages DC 24 V DC 180 V DC 205 V Connetion via ains voltage with brake retifier If the brake is not diretly supplied with DC voltage, a retifier is required. This is inluded in the sope of supply and is loated in the terinal box of the otor. The retifier onverts the AC voltage of the onnetion into DC voltage. The following retifiers are available: Half-wave retifier, 6-pole Ratio of supply voltage to brake oil voltage = 2 Approved by UL/CSA Supply voltages AC 230 V AC 400 V AC 460 V Bridge retifier, 6-pole Ratio of supply voltage to brake oil voltage = 1 Supply voltage AC 230 V Bridge/half-wave retifier, 6-pole Ratio of supply voltage to brake oil voltage up to overexitation tie = 1 beyond overexitation tie = 2 Supply voltages: AC 230 V AC 400 V V01-en_GB-02/20

207 MD three-phase AC otors Aessories Spring-applied brake Connetion via ains voltage with brake retifier Bridge/half-wave retifier, 6-pole Ratio of supply voltage to brake oil voltage up to overexitation tie = 1 beyond overexitation tie = 2 Supply voltages: AC 230 V AC 400 V During the swithing operation the bridge/half-wave retifier funtions as a bridge retifier for the overexitation tie t ü and then as a half-wave retifier. This obination optiises the perforane of the brake depending on the assignent of brake oil voltage and supply voltage: Short-tie overexitation of the brake oil Ativating the brake oil for the overexitation tie t ü with twie the rated voltage allows the disengageent tie to be redued. The brake opens ore quikly and wear on the frition lining is redued. These features ake this ativation version partiularly suitable for lifting appliations. It is therefore only available in obination with a brake with inreased braking torque. Holding urrent redution (old brake) By reduing the holding urrent, the bridge/half-wave retifier is able to redue the power input to the open brake. As the brake heats up less, this type of ativation is known as "old brake" V01-en_GB-02/

208 MD three-phase AC otors Aessories Spring-applied brake Rated data with redued braking torque ƒ Please enquire for braking torques and axiu swithing work values not listed here. Size Power input P in [kw] Braking torque 100 M B [N] M B [N] M B [N] M B [N] ) 193 1) 1800 M B [N] ) 3000 M B [N] ) ) 3600 Maxiu swithing energy M B [N] ) 100 Q E [KJ] Q E [KJ] Q E [KJ] Q E [KJ] ) ) 1800 Q E [KJ] ) 3000 Q E [KJ] ) 1 1) 3600 Transition operating frequeny Q E [KJ] ) S hü [1/h] Moent of inertia J [kg²] Mass ) In the region of the load liit the value for frition energy Q BW an be redued to 40 % V01-en_GB-02/20

209 MD three-phase AC otors Aessories Spring-applied brake Rated data with redued braking torque ƒ Ativation via half-wave or bridge retifier Size Frition energy Delay tie Engaging Rise tie Braking torque Engageent tie Disengageent tie Q BW t 11 t 12 t 1 t 2 [MJ] [s] [s] [s] [s] ƒ Ativation via bridge/half-wave retifier Design Size Frition energy Overexitation tie Min. rest tie Delay tie Engaging Rise tie Braking torque Engageent tie Disengageent tie Q BW t ü t t 11 t 12 t 1 t 2 [MJ] [s] [s] [s] [s] [s] [s] Holding urrent redution (old brake) ƒ The brake response and appliation ties are guide values. The engageent tie is 10 ties longer with AC-side swithing. With the axiu air gap the disengageent tie t 2 depending on the brake and ontrol is up to 4 ties longer than the disengageent tie with the rated air gap V01-en_GB-02/

210 MD three-phase AC otors Aessories Spring-applied brake Rated data with standard braking torque ƒ Please enquire for braking torques and axiu swithing work values not listed here. Size Power input P in [kw] Braking torque 100 M B [N] M B [N] M B [N] M B [N] ) 291 1) 1800 M B [N] ) 3000 M B [N] ) ) 3600 Maxiu swithing energy M B [N] ) 100 Q E [KJ] Q E [KJ] Q E [KJ] Q E [KJ] ) ) 1800 Q E [KJ] ) 3000 Q E [KJ] ) 1 1) 3600 Transition operating frequeny Q E [KJ] ) S hü [1/h] Moent of inertia J [kg²] Mass ) In the region of the load liit the value for frition energy Q BW an be redued to 40 % V01-en_GB-02/20

211 MD three-phase AC otors Aessories Spring-applied brake Rated data with standard braking torque ƒ Ativation via half-wave or bridge retifier Size Frition energy Delay tie Engaging Rise tie Braking torque Engageent tie Disengageent tie Q BW t 11 t 12 t 1 t 2 [MJ] [s] [s] [s] [s] ƒ Ativation via bridge/half-wave retifier Design Size Frition energy Overexitation tie Min. rest tie Delay tie Engaging Rise tie Braking torque Engageent tie Disengageent tie Q BW t ü t t 11 t 12 t 1 t 2 [MJ] [s] [s] [s] [s] [s] [s] Holding urrent redution (old brake) ƒ The brake response and appliation ties are guide values. The engageent tie is 10 ties longer with AC-side swithing. With the axiu air gap the disengageent tie t 2 depending on the brake and ontrol is up to 4 ties longer than the disengageent tie with the rated air gap V01-en_GB-02/

212 MD three-phase AC otors Aessories Spring-applied brake Rated data with inreased braking torque ƒ Please enquire for braking torques and axiu swithing work values not listed here. Size Power input P in [kw] Braking torque 100 M B [N] M B [N] M B [N] M B [N] ) 300 1) 356 1) 436 1) 1800 M B [N] ) 3000 M B [N] ) 7 1) ) 3600 Maxiu swithing energy M B [N] ) 100 Q E [KJ] Q E [KJ] Q E [KJ] Q E [KJ] ) ) ) ) 1800 Q E [KJ] ) 3000 Q E [KJ] ) 1 1) 1 1) 3600 Transition operating frequeny Q E [KJ] ) S hü [1/h] Moent of inertia J [kg²] Mass ) In the region of the load liit the value for frition energy Q BW an be redued to 40 %. ƒ Ativation via half-wave or bridge retifier Size Frition energy Q BW [MJ] Delay tie Engaging Rise tie t 11 [s] Braking torque Engageent tie t 12 [s] t 1 [s] Disengageent tie t 2 [s] V01-en_GB-02/20

213 MD three-phase AC otors Aessories Spring-applied brake Rated data with inreased braking torque ƒ Ativation via bridge/half-wave retifier Design Size Frition energy Overexitation tie Min. rest tie Delay tie Engaging Rise tie Braking torque Engageent tie Disengageent tie Q BW t ü t t 11 t 12 t 1 t 2 [MJ] [s] [s] [s] [s] [s] [s] Holding urrent redution (old brake) Design Size Frition energy Overexitation tie Min. rest tie Delay tie Engaging Rise tie Braking torque Engageent tie Disengageent tie Q BW t ü t t 11 t 12 t 1 t 2 [MJ] [s] [s] [s] [s] [s] [s] Over-exitation ƒ The brake response and appliation ties are guide values. The engageent tie is 10 ties longer with AC-side swithing. With the axiu air gap the disengageent tie t 2 depending on the brake and ontrol is up to 4 ties longer than the disengageent tie with the rated air gap V01-en_GB-02/

214 MD three-phase AC otors Aessories Spring-applied brake Perissible frition energy Q =Swithing energy per swithing yle S h =Operating frequeny Brake size = 06 to V01-en_GB-02/20

215 MD three-phase AC otors Aessories Spring-applied brake Manual release lever Motor frae size Size Brake k 5 Δ k h 5 d 12 [] [] [] [] The following obinations with anual release lever and otor onnetion in the sae position are not possible: HAN onnetor with onnetion in position 1 Inverter ote Terinal box of otor sizes 071, 080, 090 for brake and retrating (M MA BR/BS/BA/BI) V01-en_GB-02/

216 MD three-phase AC otors Aessories Resolver Stator-fed resolver with two stator windings offset by 90 and one rotor winding with transforer winding. ƒ The three-phase AC otors with resolver annot be used for speed-dependent safety funtions in onnetion with the SM 301 safety odule. Produt key Auray Absolute positioning Max. input voltage DC Max. input frequeny Ratio Stator / rotor Rotor ipedane Stator ipedane Ipedane Min. insulation resistane At DC 500 V Nuber of pole pairs U in,ax f in,ax Z ro Z so Z rs R ± 5 % ['] [V] [khz] [Ω] [Ω] [Ω] [MΩ] RS revolution j j j V01-en_GB-02/20

217 MD three-phase AC otors Aessories Inreental enoder and SinCos absolute value enoder ƒ The three-phase AC otors with inreental enoders or SinCos absolute value enoders annot be used for speed-dependent safety funtions in onnetion with the SM 301 safety odule. Enoder type Produt key Enoder type Pulses Output signals Interfaes Absolute revolutions Auray Min. input voltage DC Max. input voltage DC Max. urrent onsuption Liit frequeny Inverter assignent U in,in U in,ax I ax f ax ['] [V] [V] [A] [khz] IG128-24V- H 128 A, B trak E84AVSC E84AVHC HTL inreental IG512-24V-H 512 HTL 8.00 IG V-H E84AVHC IG V-H 2048 IG512-5V-T 512 A, B, N trak and inverted TTL inreental IG1024-5V-T 1024 TTL E84AVTC E94A ECS EVS93 IG2048-5V-T 2048 SinCos absolute value AM1024-8V-H Multiturn Vss Hiperfae Inverters Inverter Drives 8400 StateLine (E84AVSC) Inverter Drives 8400 HighLine (E84AVHC) Inverter Drives 8400 TopLine (E84AVTC) Servo-Inverters Servo Drives 9400 (E94A) 9300 servo inverters (EVS93) Servo Drives ECS 6.11 V01-en_GB-02/

218 MD three-phase AC otors Aessories Blowers ƒ The use of a blower enables operation below 20 Hz without torque derating. Rated data for 50 Hz Size Motor Nuber of phases 1 Connetion ethod U in [V] 230 U ax [V] 277 P ax [kw] Δ Y Δ Y Δ Y I ax [A] Δ Y Δ Y Δ Y Δ Y Δ Y Δ Y V01-en_GB-02/20

219 MD three-phase AC otors Aessories Blowers Rated data for 50 Hz Size Motor Nuber of phases 1 Connetion ethod U in [V] 230 U ax [V] P ax [kw] 200 Δ Y Δ Y I ax [A] Rated data for 60 Hz Size Motor Nuber of phases 1 Connetion ethod U in [V] 230 U ax [V] 277 P ax [kw] Δ Y Δ Y Δ Y Δ Y Δ Y Δ Y Δ Y Δ Y Δ Y Δ Y Δ Y I ax [A] V01-en_GB-02/

220 MD three-phase AC otors Aessories Teperature onitoring ƒ The theral sensors are integrated in the windings. The use of an additional otor protetion swith is reoended. TKO theral ontats Funtion Operating teperature Min. reset teperature Max. reset teperature Max. input urrent Max. input voltage AC T T in T ax I in,ax U in,ax [ C] [ C] [ C] [A] [V] NC ontat PTC theristor Funtion Operating teperature 155 C Rated resistane -20 C 0 C Standard T R N R N R N [ C] [Ω] [Ω] [Ω] Sudden hange in resistane DIN DIN VDE 0660 Part V01-en_GB-02/20

221 MD three-phase AC otors Aessories Teperature onitoring KTY teperature sensor Funtion Rated resistane Max. input urrent 25 C 150 C 170 C 25 C 170 C R N R N R N I in,ax I in,ax [Ω] [Ω] [Ω] [A] [A] KTY Continuous resistane hange KTY84-0 Continuous resistane hange Variation of resistane ƒ If the detetor is supplied with a easured urrent of 1 A, the above relationship between the teperature and the resistane applies V01-en_GB-02/

222 MD three-phase AC otors Aessories Terinal box The three-phase AC otors are designed for operation at a onstant ains frequeny and with an inverter. For 50 Hz operation, the otors are operated in Δonfiguration at 230 V or in star onfiguration at 400 V. For inverter operation, the base frequeny has been speified as 87 Hz at a rated voltage of 400 V in Δonfiguration. In the standard version, the otors are onneted in the terinal box. As an option, the otors are also available with the onnetors desribed on the following pages as long as the perissible ratings are not exeeded. Motor terinal box - built-on aessories assignent: 4-pole / 6-pole otors Motor type M MAXX M MARS M MAIG M MAAG M MAZE M MAHA M MALL M MALZ M MALH Motor frae size Terinal box KK1 KK1 KK1 KK1 KK1 KK1 KK1 KK1 KK3 KK3 KK3 KK2 KK2 KK2 KK2 KK2 KK2 KK2 KK3 KK3 KK3 KK3 KK2 KK2 KK2 KK2 KK2 KK3 KK1 KK1 KK1 KK2 KK1 KK1 KK1 KK1 KK1 KK2 KK1 KK V01-en_GB-02/20

223 MD three-phase AC otors Aessories Terinal box Motor terinal box - built-on aessories assignent: 4-pole / 6-pole otors Motor type M MABR M MABS M MABI M MABA M MABZ M MABH M MABL Motor frae size Terinal box KK2 KK2 KK2 KK2 KK2 KK2 KK2 KK3 KK3 KK3 KK3 KK3 KK3 KK3 KK3 KK3 KK3 KK3 KK3 KK3 KK3 KK3 KK2 KK2 KK2 KK2 KK2 KK3 KK2 KK2 KK2 KK2 KK2 KK V01-en_GB-02/

224 MD three-phase AC otors Aessories Terinal box Motor terinal box - built-on aessories assignent: 2-pole otors Motor type M MAXX M MAZE M MALL M MALZ Motor frae size Terinal box KK1 KK1 KK1 KK1 KK1 KK1 KK1 KK2 KK2 KK2 KK2 KK2 KK3 KK1 KK1 KK1 KK1 KK1 KK1 KK2 KK2 KK2 KK2 KK2 KK3 Motor type MD MABR MD MABZ MD MABL Motor frae size Terinal box KK2 KK2 KK2 KK2 KK2 KK2 KK3 KK2 KK2 KK2 KK2 KK2 KK3 KK2 KK2 KK2 KK2 KK V01-en_GB-02/20

225 MD three-phase AC otors Aessories Terinal box Diensions of KK1 ƒ ƒ For otors with otor terinal box KK1, the onnetor position an be seleted in aordane with the terinal box position. If preferred positions are not speified in the order, the able entry will be positioned as irled on the diagra below. Size Motor x g 1 1 n 2 P 1 P 2 [] [] [] [] [] [] ) ) ) ) ) ) Mx 0x 1) 0x 0x x 5x M32x M32x 1) UL/CSA approval: URus 6.11 V01-en_GB-02/

226 MD three-phase AC otors Aessories Terinal box Cable entry position when using KK1 Terinal box in position 2 Terinal box in position 3 Terinal box in position 4 Terinal box in position V01-en_GB-02/20

227 MD three-phase AC otors Aessories Terinal box Diensions of KK2 Size Motor x g 1 1 n 2 P 1 P 2 [] [] [] [] [] [] Mx 0x x 5x V01-en_GB-02/

228 MD three-phase AC otors Aessories Terinal box Diensions of KK3 Size Motor x g 1 1 n 2 P 1 P 2 P 3 P 4 P 5 [] [] [] [] [] [] [] [] [] x M32x 0x x M50x Mx Mx M63x 1) M50x 1) Mx 1) Cable entry only possible at one position. Terinal box position 2: able entry at position 5. Terinal box position 3: able entry at position 2. Terinal box position 4: able entry at position 3. Terinal box position 5: able entry at position V01-en_GB-02/20

229 MD three-phase AC otors Aessories Plug onnetors ICN, HAN and M12 onnetors (only for IG128-24V-H inreental enoder) are available for the three-phase AC otors. ICN onnetor A onnetor is used for power, brake and teperature onitoring. The onnetions to the feedbak syste and the blower eah eploy a separate onnetor. Connetion for power, brake and teperature onitoring The onnetors an be rotated through 270 and are fitted with a bayonet ath for SpeedTe onnetors. As this onnetor is also opatible with onventional union nuts, existing ating onnetors an ontinue to be used without diffiulty. The otor onnetion is deterined in the terinal box and ust be heked before oissioning. ƒ ICN 6-pole Pin assignent Contat Designation 1 BD1 / BA1 2 BD2 / BA2 PE PE 4 U 5 V Meaning Brake +/AC Brake /AC PE ondutor Phase U power Phase V power 6 W Phase W power ƒ ICN 8-pole Pin assignent Contat Designation 1 U PE PE 3 V 4 W A TB1 / TP1 / R1 B TB2 / TP2 / R2 C BD1 / BA1 D BD2 / BA2 Meaning Phase U power PE ondutor Phase V power Phase W power Theral sensor: TKO/PTC/ +KTY Theral sensor: TKO/PTC/-KTY Brake +/AC Brake /AC 6.11 V01-en_GB-02/

230 MD three-phase AC otors Aessories ICN onnetor Feedbak onnetion All enoder systes (apart fro IG128-24V-H) are also available with an ICN onnetor fixed to the otor terinal box for exeptionally fast oissioning. The onnetors are fitted with a bayonet fixing, whih is also opatible with onventional union nuts. Existing ating onnetors an therefore ontinue to be used without diffiulty. ƒ Resolver Pin assignent Contat Designation +Ref -Ref +VCC ETS +COS -COS +SIN -SIN +KTY -KTY Meaning Transforer windings Supply: Eletroni naeplate Cosine stator windings Sine stator windings Not assigned KTY teperature sensor ƒ Hiperfae inreental enoder and SinCos absolute value enoder Pin assignent Contat Designation Meaning 1 B Trak B/+SIN 2 A Trak A inverse/-cos 3 A Trak A/+COS 4 +U B Supply + 5 GND Mass Z Zero trak inverse/-rs485 7 Z Zero trak/+rs485 8 Not assigned 9 B Trak B inverse/-sin 10 Not assigned KTY -KTY KTY teperature sensor V01-en_GB-02/20