Automation systems Drive solutions Controls Inverters Motors Gearboxes Engineering Tools

Transcription

1 L-force catalogue Autoation systes Drive solutions Controls Inverters Motors Gearboxes Engineering Tools Motors: MH three-phase AC otors Gearboxes: GKR bevel gearboxes, GKS helical-bevel gearboxes, GSS helical-wor gearboxes

2

3 Contents of the L-force catalogue About Lenze Lenze akes any things easy for you. A atter of principle: the right products for every application. L-force product portfolio Autoation systes Controller-based Autoation Drive-based autoation Drive solutions HighLine tasks StateLine tasks BaseLine tasks Controls Cabinet Controller Panel Controller ' Controller 3200 C I/O syste 1000 Controller p500 Monitor Panel Inverters Decentralised Cabinet Inverter Drives 8400 protec Inverter Drives 8400 otec Inverter Drives SMV IP65 Servo Drives 9400 HighLine Inverter Drives 8400 TopLine Servo Inverters i700 Inverter Drives 8400 HighLine Inverter Drives 8400 StateLine Inverter Drives SMV IP31 Inverter Drives 8400 BaseLine Motors Servo otors Three-phase AC otors MCS synchronous servo otors MD KS synchronous servo otors MQA asynchronous servo otors MCA asynchronous servo otors MF three-phase AC otors MH three-phase AC otors MD three-phase AC otors 300 Lenze Sart Motor MD/MH basic three-phase AC otors Gearboxes Axial gearbox Right-angle gearbox Motor data g700-p planetary gearbox MPR/MPG planetary gearboxes g500-h helical gearbox GST helical gearboxes g500-s shaft-ounted helical gearbox GFL shaft-ounted helical gearboxes g500-b bevel gearbox GKR bevel gearboxes GKS helical-bevel gearboxes GSS helical-wor gearboxes Assignent see above Engineering Tools Navigator Drive Solution Designer Drive Solution Catalogue Engineer PLC Designer VisiWinNET EASY Starter Selected portfolio Additional portfolio

4 Lenze akes any things easy for you. With our otivated and coitted approach, we work together with you to create the best possible solution and set your ideas in otion - whether you are looking to optiise an existing achine or develop a new one. We always strive to ake things easy and seek perfection therein. This is anchored in our thinking, in our services and in every detail of our products. It's as easy as that! 1 Developing ideas Are you looking to build the best achine possible and already have soe initial ideas? Then get these down on paper together with us, starting with sall innovative details and stretching all the way to copletely new achines. Working together, we will develop an intelligent and sustainable concept that is perfectly aligned with your specific requireents. 2 Drafting concepts We see welcoe challenges in your achine tasks, supporting you with our coprehensive expertise and providing valuable ipetus for your innovations. We take a holistic view of the individual otion and control func- tions here and draw up consistent, end-toend drive and autoation solutions for you - keeping everything as easy as possible and as extensive as necessary. 3 Ipleenting solutions Our easy forula for satisfied custoers is to establish an active partnership with fast decision-aking processes and an individu- ally tailored offer. We have been using this siple principle to eet the ever ore spe- cialised custoer requireents in the field of echanical engineering for any years. 4 Manufacturing achines Productivity, reliability and new perforance peaks on a daily basis these are our key success factors for your achine. After deliv- ery, we offer you cleverly devised service concepts to ensure continued safe operation. The priary focus here is on technical sup- port, based on the excellent application ex- pertise of our highly-skilled and knowledgeable after-sales tea. Functional diversity in perfect harony: as one of the few full-range providers in the arket, we can provide you with precisely those products that you actually need for any achine task no ore and no less. Our L- force product portfolio, a consistent platfor for ipleenting drive and autoation tasks, is invaluable in this regard. 5 Ensuring productivity

5 A atter of principle: the right products for every application. Lenze's extensive L-force product portfolio follows a very siple principle. The functions of our finely scaled products are assigned to the three lines Base-Line, State- Line or High-Line. But what does this ean for you? It allows you to quickly recognise which products represent the best solution for your own specific requireents. Powerful products with a ajor ipact: Easy handling High quality and durability Reliable technologies in tune with the latest developents Lenze products undergo the ost stringent testing in our own laboratory. This allows us to ensure that you will receive consistently high quality and a long service life. In addition to this, five logistics centres ensure that the Lenze products you select are available for quick delivery anywhere across the globe. It's as easy as that!

6 L-force product portfolio Controls Engineering Tools

7 L-force product portfolio Inverters

8 L-force product portfolio Motors

9 L-force product portfolio Gearboxes

10

11 Gearboxes GKR bevel gearboxes kw

12

13 GKR bevel gearboxes Contents General inforation Technical data Accessories List of abbreviations Product key Product inforation Functions and features Diensioning Notes on ordering Ordering details checklist Perissible radial and axial forces at output Output backlash in angular inutes Moents of inertia Weights Selection tables Diensions Hollow shaft with shrink disc Mounting set for hollow shaft circlip: Proposed design for auxiliary tools Hoseproof hollow shaft cover Gearboxes with 2nd output shaft end Rubber buffer for torque plate Torque plate on threaded pitch circle Torque plate at housing foot Ventilations

14 GKR bevel gearboxes General inforation List of abbreviations η c=1 c f N F ax,ax F rad,ax H ax i J M 2 n 2 n N P N S hü T opr,ax T opr,in U N, Δ U N, Y [Hz] [] [kgc²] [N] [r/in] [r/in] [kw] [1/h] [ C] [ C] [V] [V] Efficiency Load capacity Rated frequency Max. axial force Max. radial force Site altitude Ratio Moent of inertia Mass Output torque Output speed Rated speed Rated power Transition operating frequency Max. abient operating teperature Min. abient operating teperature Rated voltage Rated voltage CE CSA DIN EMC EN IEC IM IP NEMA UL UR VDE CCC GOST curus UkrSEPRO Counauté Européenne Canadian Standards Association Deutsches Institut für Norung e.v. Electroagnetic copatibility European standard International Electrotechnical Coission International Mounting Code International Protection Code National Electrical Manufacturers Association Underwriters Laboratory Listed Product Underwriters Laboratory Recognized Product Verband deutscher Elektrotechniker (Association of Geran Electrical Engineers) China Copulsory Certificate Certificate for Russian Federation Cobined certification arks of UL for the USA and Canada Certificate for Ukraine V00-en_GB-12/2013

15 GKR bevel gearboxes General inforation Product key 6.8 V00-en_GB-12/

16 GKR bevel gearboxes General inforation Product key Mounting position (A...F) and position of syste blocks (1...6) Hollow shaft: 0 Solid shaft: 3, 5, 8 (3+5) Hollow shaft with shrink disc: 3, 5 Without flange: 0 Flange: 3, 5, 8 (3+5) Terinal box / otec: 2, 3, 4, 5 Gearbox designs 6.8 Basic versions Motor efficiency Surface and corrosion protection Lubricant Ventilation Standard efficiency Increased efficiency (IE2) No OKS (unpainted, aluiniu housing) OKS-S (paint: RAL 7012) CLP 460 (ineral) Breather eleents for GKR06 Options Surface and corrosion protection Lubricant Shaft sealing rings Accessories Naeplate OKS-G (prier: grey) OKS-S (special paint according to RAL) OKS-M (special paint according to RAL) OKS-L (special paint according to RAL) CLP HC 320 (synthetic) CLP HC 220 USDA H1 (synthetic) Driven shaft: Viton Rubber buffer for torque plate (GKR 03/04 only) Torque plate on threaded pitch circle Housing foot torque plate (GKR05/06 only) 2nd output shaft end Shrink disc cover Hoseproof hollow shaft cover Mounting set for hollow shaft circlip Metal naeplate (supplied loose) Adhesive naeplate (supplied loose) V00-en_GB-12/2013

17 GKR bevel gearboxes General inforation Product inforation Lenze provides a geared otor construction kit, which covers a wide range of requireents. Nuerous drive-side and output-side options enable precise adaptation of the drive to the specific application. This is the basis for versatile applications and functional scalability of our gearboxes and geared otors. The odular concept and high power density ake extreely copact sizes possible. Optiised teeth profiles and ground gears ensure low-noise operation and low backlash. The gearboxes are of copact and hence space-saving construction. Designs 2-stage gearbox Hollow shaft with keyway or shrink disc Solid shaft with keyway Foot or flange ounting Torque plate, including rubber buffer With MH three-phase AC otors (efficiency classes IE2) power range kw For axiu efficiency Our bevel gearboxes are a showpiece for lightweight engineering. They are also highly efficient and are equipped with wear free teeth. Together with three-phase AC otors and servo otors, they for and efficient and copact drive unit. They are available as a 2-stage version with a torque of up to 450 N and a ratio of up to i=76. Inverters for otor-proxiity installation The Drive Package with decentralised Inverter Drives 8400 otec covers a power range up to 7.5 kw. Bevel geared otor GKR05-2M HBR V00-en_GB-12/

18 GKR bevel gearboxes General inforation Functions and features Gearbox type Housing Design Material Solid shaft Design Tolerance Material Hollow shaft Design Tolerance Material Toothed parts Design Material Shaft-hub joint Shaft sealing rings Design Material Bearing Design Lubricants Standard Quantities Mechanical efficiency 1-stage gearboxes [η c=1 ] 2-stage gearboxes [η c=1 ] 3-stage gearboxes [η c=1 ] 4-stage gearboxes [η c=1 ] Notes GKR Cuboid Aluiniu / cast iron with keyway to DIN (d > 50 ) k6 (d 50 ) Tepered steel C45 or CrMo4 H: with keyway S: sooth Bore H7 Tepered steel C45 Optiised tooth flanks and profile geoetry Ground tooth flanks Case-hardened steel 1st stage/prestage/helical (bevel) gearbox: Friction-type connection Output stage (= 2nd, 3rd or 4th stage): Friction-type or positive-fit connection With dust lip NB / FP Ball bearing / tapered-roller bearing depending on size and design DIN corresponding to ounting position (see operating instructions) V00-en_GB-12/2013

19 GKR bevel gearboxes General inforation Functions and features Lubricants Lenze gearboxes and geared otors are ready for operation on delivery and are filled with lubricants specific to both the drive and the design. The ounting position and design specified in the order are key factors in choosing the volue of lubricant. The lubricants listed in the lubricant table are approved for use in Lenze drives. Lubricant table Mode Abient teperature [ C] Specification Note Changing interval Fuchs Klüber Shell CLP Mineral based oil with additives operating hours not later than after three years (oil teperature C) Fuchs Renolin CLP 460 Klüberoil GEM1-460 N Shell Oala 460 CLP HC 320 CLP HC 220 USDA H Synthetic-based oil (synthetic hydrocarbon / poly-alpha-olefin oil) For food processing industry operating hours operating hours not later than after three years (oil not later than after three years (oil teperature C) teperature C) Fuchs Renolin breer & leguil Unisyn CLP 320 Cassida Fluid GL 220 Klübersynth Klüberoil GEM4-320 N 4 UH1-220 N Shell Oala Oil HD 320 ƒ Please contact your Lenze office if you are operating at abient teperatures in areas up to < -20 C > or up to +40 C. 6.8 V00-en_GB-12/

20 GKR bevel gearboxes General inforation Functions and features Surface and corrosion protection For optiu protection of geared otors against abient conditions, the surface and corrosion protection syste (OKS) offers tailor-ade solutions. Various surface coatings cobined with other protective easures ensure that the geared otors operate reliably even at high air huidity, in outdoor installations or in the presence of atospheric ipurities. Any colour fro the RAL Classic collection can be chosen for the top coat. The geared otors are also available unpainted (no surface and corrosion protection). Surface and corrosion protection syste OKS-G (pried) OKS-S (sall) OKS-M (ediu) OKS-L (high) Applications Catalogue text Measures Catalogue text 1K priing coat (grey) Zinc-coated screws Dependent on subsequent Rust-free breather eleents top coat applied Optional easures Stainless steel naeplate Surface coating as per corrosivity category C1 (in line with EN Standard applications 2) Internal installation in heated Zinc-coated screws buildings Rust-free breather eleents Air huidity up to 90% Optional easures Stainless steel naeplate Surface coating as per corrosivity category C2 (in line with EN ) Internal installation in nonheated buildings Zinc-coated screws Rust-free breather eleents Covered, protected external Optional easures installation Stainless steel shaft Air huidity up to 95% Stainless steel naeplate Rust-free shrink disc (on request) Surface coating as per corrosivity category C3 (in line with EN ) Blower cover and B end shield additionally pried Cable glands with gaskets Corrosion-resistant brake with cover ring, stainless friction plate, and chroe-plated arature plate (on request) All screws/screw plugs zinc-coated External installation Stainless breather eleents Air huidity above 95% Threaded holes that are not used are closed by eans of plastic plugs Cheical industry plants Optional easures Food industry Sealed recesses on otor (on request) Stainless steel shaft Stainless steel naeplate Rust-free shrink disc (on request) Additional priing coat on cast iron fan Oil expansion tank and torque plates painted separately and supplied loose V00-en_GB-12/2013

21 GKR bevel gearboxes General inforation Functions and features Structure of surface coating Surface and corrosion protection syste Corrosivity category DIN EN ISO Surface coating Structure Colour Without OKS (uncoated) OKS-G (pried) OKS-S (sall) OKS-M (ediu) OKS-L (high) C1 C2 C3 Dipping pried gearbox Dipping pried gearbox 1K priing coat Dipping pried gearbox 2K-PUR top coat Dipping pried gearbox 1K priing coat 2K-PUR top coat Dipping pried gearbox 2K-EP priing coat 2K-PUR top coat Standard: RAL 7012 Optional: RAL Classic Standard: RAL 7012 Optional: RAL Classic Standard: RAL 7012 Optional: RAL Classic ƒ The gearboxes GKR have an aluiniu housing, therefore a dipping prier is dispensed with in the case of these gearboxes. 6.8 V00-en_GB-12/

22 GKR bevel gearboxes General inforation Functions and features Ventilation Gearboxes without ventilation No ventilation is required for gearboxes GKR Gearboxes with ventilation Gearbox GKR06 is supplied with a breather eleent as standard V00-en_GB-12/2013

23 GKR bevel gearboxes General inforation Diensioning General inforation about the data provided in this catalogue Powers, torques and speeds The powers, torques and speeds specified in this catalogue are rounded values and are valid under the following conditions: Operating tie/day = 8 h (100% OT) Duty class I for up to 10 switching operations/h Mounting positions and designs in this catalogue Standard lubricant T ab = 20 C for gearboxes, T ab = 40 C for otors (in accordance with EN 60034) Site altitude < = 1000 asl The selection tables provide the perissible echanical powers and torques. For notes on the theral power liit, see chapter drive diensioning. The rated power specified for otors and geared otors applies to operating ode S1 (in accordance with EN 60034). Under different operating conditions, the values obtained ay vary fro those listed here. In the case of extree operating conditions, please consult your Lenze sales office. 6.8 V00-en_GB-12/

24 GKR bevel gearboxes General inforation Diensioning Theral power liit The theral power liit, defined by the heat balance, liits the perissible gearbox continuous power. It ay be less than the echanical power ratings listed in the selection tables. The theral power liit is affected by: the churning losses in the lubricant. These are deterined by the ounting position and the circuferential speed of the wheels the load and the speed the abient conditions: teperature, air circulation, input or dissipation via shafts and the foundation Please consult your Lenze subsidiary if the following input speeds n 1 are exceeded on a continuous basis (continuous is defined as ore than 8 h/day): Motor frae size Mounting position A, B, E, F 3000 r/in 3000 r/in 2000 r/in Mounting position C, D 3000 r/in 1500 r/in 1500 r/in if the following input speeds n 1 are exceeded: Motor frae size Mounting position A, B, E, F 4000 r/in 4000 r/in 3000 r/in Mounting position C, D 3000 r/in 2000 r/in 1500 r/in Possible ways of extending the application area synthetic lubricant (option) shaft sealing rings ade fro FP aterial/viton (option) reduction in lubricant quantity cooling of the geared otor by eans of air convection on the achine/syste V00-en_GB-12/2013

25 GKR bevel gearboxes General inforation Diensioning Load capacity and application factor Load capacity c of gearbox Rated value for the load capacity of Lenze geared otors. c is the ratio of the perissible rated torque of the gearbox to the rated torque supplied by the drive coponent (e.g. the built-in Lenze otor). The value of c ust always be greater than the value of the application factor k calculated for the application. Application factor k (according to DIN 3990) Takes into account the influence of teporally variable loads which are actually present during the anticipated operating tie of gearboxes and geared otors. k is deterined by: the type of load the load intensity teporal influences Duty class I II III Load type Sooth operation, sall or light jolts Uneven operation, average jolts Uneven operation, severe jolts and/or alternating load Application factor k 6.8 V00-en_GB-12/

26 GKR bevel gearboxes General inforation Diensioning Torque derating at low otor frequencies Motor size-dependent torque reduction, taking into account the theral response during operation on the inverter. Torque characteristics A = Operation with integral fan and brake B = Operation with integral fan and brake control "Holding current reduction" You can use the Drive Solution Designer for precise drive diensioning. The Drive Solution Designer helps you to carry out a fast and highquality drive diensioning. The software includes well-founded and proven knowledge on drive applications and electro-echanical drive coponents. 6.8 Please contact your Lenze sales office V00-en_GB-12/2013

27 GKR bevel gearboxes General inforation Diensioning Notes on the selection tables The selection tables show the available cobinations of gearbox type, nuber of stages, ratio and otor. The following legend indicates the structure of the selection tables. 6.8 V00-en_GB-12/

28 GKR bevel gearboxes General inforation Diensioning Notes on the selection tables Motor voltages The power values and torques indicated in the selection tables relate to the following otor voltages: 50 Hz : Δ 230 V / Y 400 V 60 Hz : Δ 265 V / Y 460 V 87 Hz : Δ 400 V Operation at 87 Hz In 87 Hz operation, the three-phase AC otor (which is designed for a voltage of Δ 230 V / Y 400 V at 50 Hz) is operated on an inverter with 400 V rated voltage in a delta connection. It is iportant to note here that the inverter ust be configured for 87Hz output. This offers the following advantages over 50 Hz operation: the setting range of the otor is increased by a factor of the otor can then provide around 1.73 ties greater output, which in turn allows a saller and ore affordable otor to be selected for the application. the efficiency of the otor is also iproved V00-en_GB-12/2013

29 GKR bevel gearboxes General inforation Notes on ordering We want to be sure that you receive the correct products in good tie. To allow us to achieve this we need: your address and your copany data our product key for the individual products in this catalogue your delivery date and delivery address Ordering procedure Please use the ordering inforation checklist to ensure that you provide all the ordering inforation required for the various products. The ordering inforation checklist, the product key, the basic versions, options, ounting position and position of the syste blocks will be found in the General Product key section. A list of Lenze's worldwide sales offices can be found on the Internet: V00-en_GB-12/

30 GKR bevel gearboxes General inforation Ordering details checklist V00-en_GB-12/2013

31 GKR bevel gearboxes General inforation Ordering details checklist 6.8 V00-en_GB-12/

32 GKR bevel gearboxes General inforation Ordering details checklist Three-phase AC otors options V00-en_GB-12/2013

33 GKR bevel gearboxes General inforation Ordering details checklist Three-phase AC otors options 6.8 V00-en_GB-12/

34 GKR bevel gearboxes General inforation V00-en_GB-12/2013

35 GKR bevel gearboxes Technical data Perissible radial and axial forces at output Perissible radial force F rad,per = in(f w x f α x F rad,ax ; f w x F rad,ax at n 2 16 r/in) Perissible axial force F ax,per = F ax,ax if F rad = 0 If F rad and F ax 0; please contact Lenze. Application of forces Effective direction factor f α at output shaft 6.8 Direction of rotation L Direction of rotation R V00-en_GB-12/

36 GKR bevel gearboxes Technical data Perissible radial and axial forces at output Additional load factor f w at output shaft Solid shaft (V ) Hollow shaft (H ) GKR -2 H Size Gearbox n 2 [r/in] Max. radial force, Hollow shaft F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax GKR GKR GKR GKR Max. axial force, Hollow shaft F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax GKR GKR GKR05 GKR ƒ Application of force F rad : at hollow shaft end face (x = 0) ƒ F ax,ax only valid with F rad = 0 ƒ Neither radial nor axial forces are perissible for the hollow shaft with shrink disc (S ) V00-en_GB-12/2013

37 GKR bevel gearboxes Technical data Perissible radial and axial forces at output GKR -2 V R Size Gearbox n 2 [r/in] Max. radial force, Solid shaft without flange F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax GKR GKR GKR GKR Max. axial force, Solid shaft without flange F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax GKR GKR GKR GKR GKR -2 V K Size Gearbox n 2 [r/in] Max. radial force, Solid shaft with flange F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax GKR GKR GKR GKR Max. axial force, Solid shaft with flange F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax GKR GKR GKR05 GKR ƒ Application of force F rad : centre of shaft journal (x = l/2) ƒ F ax,ax only valid with F rad = 0 V00-en_GB-12/

38 GKR bevel gearboxes Technical data Output backlash in angular inutes ƒ Backlash ϕ depending on ratio i GKR V00-en_GB-12/2013

39 GKR bevel gearboxes Technical data Moents of inertia GKR -2 ƒ Moent of inertia (J) depending on ratio i Gearbox GKR03 Gearbox GKR Gearbox GKR05 Gearbox GKR ƒ ƒ The oents of inertia relate to the drive shaft of the gearbox. The total oent of inertia is calculated by adding the values of the gearbox, otor and accessories. V00-en_GB-12/

40 GKR bevel gearboxes Technical data Weights GKR -2M HAR / HBR GKR04 GKR05 GKR06 080C C C C C C22 132C C22 87 GKR -2M HAK GKR04 GKR05 GKR06 080C C C C C C C C22 88 ƒ Weights with oil filling for ounting position A; all values are approxiate. The weights relate to the basic version. Bear in ind that additional weights ay be needed, e.g. for otor options V00-en_GB-12/2013

41 GKR bevel gearboxes Technical data Weights GKR -2M VAR / VBR GKR04 GKR05 GKR06 080C C C C C C C12 132C22 89 GKR -2M VAK GKR04 GKR05 GKR06 080C C C C C C C C22 90 ƒ Weights with oil filling for ounting position A; all values are approxiate. The weights relate to the basic version. Bear in ind that additional weights ay be needed, e.g. for otor options. 6.8 V00-en_GB-12/

42 GKR bevel gearboxes Technical data Weights GKR -2M SAR / SBR GKR04 GKR05 GKR06 080C C C C C C C C22 88 GKR -2M SAK GKR04 GKR05 GKR06 080C C C C C C C12 132C22 89 ƒ Weights with oil filling for ounting position A; all values are approxiate. The weights relate to the basic version. Bear in ind that additional weights ay be needed, e.g. for otor options V00-en_GB-12/2013

43 GKR bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 0.75 kw nn 1410 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKR05-2M 080C GKR04-2M 080C GKR04-2M 080C GKR05-2M 080C GKR04-2M 080C GKR04-2M 080C GKR04-2M 080C GKR04-2M 080C GKR04-2M 080C GKR04-2M 080C GKR05-2M 080C GKR04-2M 080C GKR05-2M 080C GKR04-2M 080C GKR05-2M 080C GKR04-2M 080C GKR05-2M 080C GKR04-2M 080C GKR05-2M 080C GKR04-2M 080C GKR05-2M 080C GKR05-2M 080C GKR06-2M 080C GKR05-2M 080C GKR06-2M 080C GKR05-2M 080C GKR06-2M 080C GKR05-2M 080C GKR06-2M 080C GKR05-2M 080C GKR06-2M 080C GKR05-2M 080C GKR06-2M 080C GKR05-2M 080C GKR06-2M 080C GKR05-2M 080C GKR06-2M 080C GKR06-2M 080C32 V00-en_GB-12/

44 GKR bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = kw nn 1430 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKR05-2M 090C GKR04-2M 090C GKR04-2M 090C GKR05-2M 090C GKR04-2M 090C GKR04-2M 090C GKR04-2M 090C GKR05-2M 090C GKR04-2M 090C GKR05-2M 090C GKR04-2M 090C GKR05-2M 090C GKR04-2M 090C GKR05-2M 090C GKR05-2M 090C GKR04-2M 090C GKR05-2M 090C GKR04-2M 090C GKR05-2M 090C GKR05-2M 090C GKR05-2M 090C GKR06-2M 090C GKR05-2M 090C GKR06-2M 090C GKR05-2M 090C GKR06-2M 090C GKR05-2M 090C GKR06-2M 090C GKR05-2M 090C GKR06-2M 090C GKR05-2M 090C GKR06-2M 090C GKR06-2M 090C GKR06-2M 090C GKR06-2M 090C12 V00-en_GB-12/2013

45 GKR bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 1.5 kw nn 1435 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKR05-2M 090C GKR05-2M 090C GKR04-2M 090C GKR04-2M 090C GKR05-2M 090C GKR05-2M 090C GKR04-2M 090C GKR05-2M 090C GKR04-2M 090C GKR04-2M 090C GKR05-2M 090C GKR04-2M 090C GKR05-2M 090C GKR04-2M 090C GKR05-2M 090C GKR05-2M 090C GKR05-2M 090C GKR05-2M 090C GKR06-2M 090C GKR05-2M 090C GKR06-2M 090C GKR05-2M 090C GKR06-2M 090C GKR05-2M 090C GKR06-2M 090C GKR05-2M 090C GKR06-2M 090C GKR05-2M 090C GKR06-2M 090C GKR05-2M 090C GKR06-2M 090C GKR06-2M 090C GKR06-2M 090C GKR06-2M 090C GKR06-2M 090C GKR06-2M 090C32 V00-en_GB-12/

46 GKR bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 2.2 kw nn 1445 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKR05-2M 100C GKR05-2M 100C GKR05-2M 100C GKR05-2M 100C GKR05-2M 100C GKR05-2M 100C GKR06-2M 100C GKR05-2M 100C GKR06-2M 100C GKR05-2M 100C GKR06-2M 100C GKR05-2M 100C GKR05-2M 100C GKR06-2M 100C GKR05-2M 100C GKR06-2M 100C GKR05-2M 100C GKR06-2M 100C GKR05-2M 100C GKR06-2M 100C GKR05-2M 100C GKR06-2M 100C GKR06-2M 100C GKR06-2M 100C GKR06-2M 100C GKR06-2M 100C V00-en_GB-12/2013

47 GKR bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 3.0 kw nn 1445 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKR06-2M 100C GKR05-2M 100C GKR06-2M 100C GKR05-2M 100C GKR06-2M 100C GKR05-2M 100C GKR06-2M 100C GKR05-2M 100C GKR06-2M 100C GKR05-2M 100C GKR06-2M 100C GKR05-2M 100C GKR06-2M 100C GKR05-2M 100C GKR06-2M 100C GKR05-2M 100C GKR06-2M 100C GKR05-2M 100C GKR05-2M 100C GKR06-2M 100C GKR06-2M 100C GKR06-2M 100C GKR06-2M 100C GKR06-2M 100C GKR06-2M 100C GKR06-2M 100C V00-en_GB-12/

48 GKR bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 4.0 kw nn 1455 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKR06-2M 112C GKR06-2M 112C GKR06-2M 112C GKR06-2M 112C GKR06-2M 112C GKR06-2M 112C GKR06-2M 112C GKR06-2M 112C GKR06-2M 112C GKR06-2M 112C GKR06-2M 112C GKR06-2M 112C GKR06-2M 112C GKR06-2M 112C V00-en_GB-12/2013

49 GKR bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 5.5 kw nn 1470 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKR06-2M 132C GKR06-2M 132C GKR06-2M 132C GKR06-2M 132C GKR06-2M 132C GKR06-2M 132C GKR06-2M 132C GKR06-2M 132C GKR06-2M 132C GKR06-2M 132C GKR06-2M 132C V00-en_GB-12/

50 GKR bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 7.5 kw nn 1460 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKR06-2M 132C GKR06-2M 132C GKR06-2M 132C GKR06-2M 132C GKR06-2M 132C GKR06-2M 132C GKR06-2M 132C GKR06-2M 132C V00-en_GB-12/2013

51 GKR bevel gearboxes Technical data 6.8 V00-en_GB-12/

52 GKR bevel gearboxes Technical data Diensions GKR -2M H R V00-en_GB-12/2013

53 GKR bevel gearboxes Technical data k 080C32 090C12 090C32 100C12 100C32 112C22 132C12 132C22 g g 1 MHEMAXX MHEMABR MHEMAXX k MHEMABR Δ k MHFMAXX MHFMABR k GKR GKR GKR a a 7 a 8 h o p 1) p 1 s 6 GKR GKR GKR d 2) d 1 l 1) l 1 l 2 u t 3) i 1 a 1 b 1 e 1 f 1 s 1 GKR04 GKR05 GKR06 H JS , J M8x16 M8x15 M10x22 b 5 b 7 c 5 e 5 f 5 n s 5 GKR GKR GKR ) k 2! 2) l 2! 3) d = 25 > DIN 6885/3 6.8 V00-en_GB-12/

54 GKR bevel gearboxes Technical data Diensions GKR -2M HAK V00-en_GB-12/2013

55 GKR bevel gearboxes Technical data k 080C32 090C12 090C32 100C12 100C32 112C22 132C12 132C22 g g 1 MHEMAXX MHEMABR MHEMAXX k MHEMABR Δ k MHFMAXX MHFMABR k GKR GKR GKR a h k 8 o p 1) p 1 q GKR GKR GKR d 2) d 1 l l 1 l 2 u t 3) i 2 o 1 1) a 2 b 2 c 2 e 2 f 2 s 2 GKR04 GKR05 GKR06 H JS , j ) k 2! 2) l 2! 3) d = 25 > DIN 6885/3 6.8 V00-en_GB-12/

56 GKR bevel gearboxes Technical data Diensions GKR -2M V R V00-en_GB-12/2013

57 GKR bevel gearboxes Technical data k 080C32 090C12 090C32 100C12 100C32 112C22 132C12 132C22 g g 1 MHEMAXX MHEMABR MHEMAXX k MHEMABR Δ k MHFMAXX MHFMABR k GKR GKR GKR a a 7 a 8 h o p 1) p 1 q s 6 GKR GKR GKR d d 1 d 2 l l 1 l 2 u t i 1 o 1 1) a 1 b 1 e 1 f 1 s 1 k6 J7 GKR M M8x16 GKR M M8x15 GKR M M10x22 b 5 b 7 c 5 e 5 f 5 n s 5 GKR GKR GKR ) k 2! 6.8 V00-en_GB-12/

58 GKR bevel gearboxes Technical data Diensions GKR -2M VAK V00-en_GB-12/2013

59 GKR bevel gearboxes Technical data k 080C32 090C12 090C32 100C12 100C32 112C22 132C12 132C22 g g 1 MHEMAXX MHEMABR MHEMAXX k MHEMABR Δ k MHFMAXX MHFMABR k GKR GKR GKR a h k 8 o p 1) p 1 q GKR GKR GKR d d 2 l l 1 l 2 u t i 2 o 1 1) a 2 b 2 c 2 e 2 f 2 s 2 GKR04 GKR05 GKR06 k M6 M10 M j ) k 2! 6.8 V00-en_GB-12/

60 GKR bevel gearboxes Technical data V00-en_GB-12/2013

61 GKR bevel gearboxes Accessories Hollow shaft with shrink disc d 1) h6 g 2 g 3 g 4 i 1 k 9 k 10 k 11 l l 1 l 4 GKR03 GKR04 GKR05 GKR ) Machine shaft design. ƒ ƒ Output flange and hollow shaft with shrink disc (output version SAK) are not possible in the sae location. For additional diensions see output version H. Ensure that the strength of the achine shaft aterial is adequate in shrink disc designs. When using typical steels, e.g. C45, CrMo4, the torques listed in the selection tables can be used without restriction. Please consult us if you wish to use aterial that is considerably weaker. Mediu surface roughness Rz ust not exceed 15 µ (turning is sufficient). 6.8 V00-en_GB-12/

62 GKR bevel gearboxes Accessories Mounting set for hollow shaft circlip: Proposed design for auxiliary tools d l 1 d 2 l 9 c 7 H7 GKR03 GKR04 GKR M6 M10 M GKR M V00-en_GB-12/2013

63 GKR bevel gearboxes Accessories Hoseproof hollow shaft cover ƒ Cover including gasket GKR03 GKR04 GKR05 GKR06 k 11 [] Gearboxes with 2nd output shaft end 6.8 d k6 l i 1 o 1 [] [] [] [] GKR03 GKR GKR GKR V00-en_GB-12/

64 GKR bevel gearboxes Accessories Rubber buffer for torque plate d D c a 7 a 8 GKR03 GKR V00-en_GB-12/2013

65 GKR bevel gearboxes Accessories Torque plate on threaded pitch circle In position 3 In position GKR03 GKR04 a 4 a 8 a 9 d D k 6 p 8 p V00-en_GB-12/

66 GKR bevel gearboxes Accessories Torque plate on threaded pitch circle In position 3 In position GKR05 GKR06 a 4 a 7 a 8 a 9 b 4 d D k V00-en_GB-12/2013

67 GKR bevel gearboxes Accessories Torque plate at housing foot In position 4 or 6 GKR05 GKR06 a 4 a 7 a 8 b 8 c d D e 5 k V00-en_GB-12/

68 GKR bevel gearboxes Accessories Ventilation position GKR06 Ventilation V00-en_GB-12/2013

69 GKR bevel gearboxes Accessories 6.8 V00-en_GB-12/

70 GKR bevel gearboxes Accessories V00-en_GB-12/2013

71 Gearboxes GKS helical-bevel gearboxes 0.75 to 45 kw

72

73 GKS helical-bevel gearboxes Contents General inforation Technical data Accessories List of abbreviations Product key Product inforation Functions and features Diensioning Notes on ordering Ordering details checklist Perissible radial and axial forces at output Output backlash in angular inutes Moents of inertia Weights Selection tables Diensions Hollow shaft with shrink disc Mounting set for hollow shaft circlip: Proposed design for auxiliary tools Hoseproof hollow shaft cover Gearboxes with 2nd output shaft end Torque plate on threaded pitch circle Torque plate at housing foot Ventilations

74 GKS helical-bevel gearboxes General inforation List of abbreviations η c=1 c f N F ax,ax F rad,ax H ax i J M 2 n 2 n N P N S hü T opr,ax T opr,in U N, Δ U N, Y [Hz] [] [kgc²] [N] [r/in] [r/in] [kw] [1/h] [ C] [ C] [V] [V] Efficiency Load capacity Rated frequency Max. axial force Max. radial force Site altitude Ratio Moent of inertia Mass Output torque Output speed Rated speed Rated power Transition operating frequency Max. abient operating teperature Min. abient operating teperature Rated voltage Rated voltage CE CSA DIN EMC EN IEC IM IP NEMA UL UR VDE CCC GOST curus UkrSEPRO Counauté Européenne Canadian Standards Association Deutsches Institut für Norung e.v. Electroagnetic copatibility European standard International Electrotechnical Coission International Mounting Code International Protection Code National Electrical Manufacturers Association Underwriters Laboratory Listed Product Underwriters Laboratory Recognized Product Verband deutscher Elektrotechniker (Association of Geran Electrical Engineers) China Copulsory Certificate Certificate for Russian Federation Cobined certification arks of UL for the USA and Canada Certificate for Ukraine Lenze V02-en_GB-03/2014

75 GKS helical-bevel gearboxes General inforation Product key 6.9 Lenze V02-en_GB-03/

76 GKS helical-bevel gearboxes General inforation Product key Mounting position (A to F) and position of syste blocks (1 to 6) Hollow shaft: 0 Solid shaft: 3, 5, 8 (3+5) Hollow shaft with shrink disc: 3, 5 Without flange: 0 Flange: 3, 5, 8 (3+5) Terinal box / otec: 2, 3, 4, 5 Gearbox designs 6.9 Basic versions Motor efficiency Surface and corrosion protection Lubricant Ventilation Standard efficiency Increased efficiency (IE2) OKS-G (prier: grey) OKS-S (paint: RAL 7012) CLP 460 (ineral) Oil control plugs for GKS05 to 14 Breather eleents for GKS06 14 Options Surface and corrosion protection Lubricant Shaft sealing rings Ventilation Accessories Naeplate OKS-S (special paint according to RAL) OKS-M (special paint according to RAL) OKS-L (special paint according to RAL) CLP HC 320 (synthetic) CLP HC 220 USDA H1 (synthetic) Driven shaft: Viton Breather eleents for GKS05 Copensation reservoir for GKS09 to 14-3 in ounting position C Torque plate on threaded pitch circle Housing foot torque plate 2nd output shaft end Shrink disc cover Hoseproof hollow shaft cover Mounting set for hollow shaft circlip Metal naeplate (supplied loose) Adhesive naeplate (supplied loose) Lenze V02-en_GB-03/2014

77 GKS helical-bevel gearboxes General inforation Product inforation Lenze provides a geared otor construction kit, which covers a wide range of requireents. Nuerous drive-side and output-side options enable precise adaptation of the drive to the specific application. This is the basis for versatile applications and functional scalability of our gearboxes and geared otors. The odular concept and high power density ake extreely copact sizes possible. Optiised teeth profiles and ground gears ensure low-noise operation and low backlash. The gearboxes are of copact and hence space-saving construction. Designs 3-stage and 4-stage gearboxes Hollow shaft with keyway or shrink disc Solid shaft with keyway Foot or flange ounting Torque plate, including rubber buffer With MH three-phase AC otors (efficiency classes IE2)power range kw For axiu precision Helical-bevel gearboxes have the ajor benefit of enabling extreely precise and reproducible positioning oveents owing to their high torsional stiffness and low backlash. Our helical-bevel gearboxes can be cobined with three-phase AC otors and servo otors to for a copact unit. They are available in 3- and 4-stage versions with a torque of up to 11,639 N and a ratio of up to i=1,936. Inverters for otor-proxiity installation The Drive Package with decentralised Inverter Drives 8400 otec covers a power range up to 7.5 kw. Helical-bevel geared otor GKS07-3M HBR Lenze V02-en_GB-03/

78 GKS helical-bevel gearboxes General inforation Functions and features Gearbox type Housing Design Material Solid shaft Design Tolerance Material Hollow shaft Design Tolerance Material Toothed part Design Material Shaft-hub joint Shaft sealing rings Design Material Bearing Design Schierstoffe Standard Quantities Mechanical efficiency 1-stage gearboxes [η c=1 ] 2-stage gearboxes [η c=1 ] 3-stage gearboxes [η c=1 ] 4-stage gearboxes [η c=1 ] Notes GKS Cuboid Aluiniu / cast iron with keyway to DIN 6885 k6 (d 50 ) 6 (d > 50 ) Tepered steel C45 or CrMo4 H: with keyway S: sooth Bore H7 Tepered steel C45 Ground tooth flanks Optiised tooth flank geoetry Case-hardened steel 1st stage/prestage/helical (bevel) gearbox: Friction-type connection Output stage (= 2nd, 3rd or 4th stage): Friction-type or positive-fit connection With dust lip NB / FP Ball bearing / tapered-roller bearing depending on size and design DIN corresponding to ounting position (see operating instructions) Lenze V02-en_GB-03/2014

79 GKS helical-bevel gearboxes General inforation Functions and features Lubricants Lenze gearboxes and geared otors are ready for operation on delivery and are filled with lubricants specific to both the drive and the design. The ounting position and design specified in the order are key factors in choosing the volue of lubricant. The lubricants listed in the lubricant table are approved for use in Lenze drives. Lubricant table Mode Abient teperature [ C] Specification Note Changing interval Fuchs Klüber Shell CLP Mineral based oil with additives operating hours not later than after three years (oil teperature 70 to 80 C) Fuchs Renolin CLP 460 Klüberoil GEM1-460 N Shell Oala S2 G 460 CLP HC 320 CLP HC 220 USDA H Synthetic-based oil (synthetic hydrocarbon / poly-alpha-olefin oil) For food processing industry operating hours operating hours not later than after three years (oil not later than after three years (oil teperature 70 to 80 C) teperature 70 to 80 C) Fuchs Renolin breer & leguil Unisyn CLP 320 Cassida Fluid GL 220 Klübersynth Klüberoil GEM4-320 N 4 UH1-220 N Shell Oala S4 GX HD 320 ƒ Please contact your Lenze sales office if you are operating at abient teperatures in areas up to< -20 C bzw. > or up to +40 C. 6.9 Lenze V02-en_GB-03/

80 GKS helical-bevel gearboxes General inforation Functions and features Surface and corrosion protection For optiu protection of geared otors against abient conditions, the surface and corrosion protection syste (OKS) offers tailor-ade solutions. Various surface coatings cobined with other protective easures ensure that the geared otors operate reliably even at high air huidity, in outdoor installations or in the presence of atospheric ipurities. Any colour fro the RAL Classic collection can be chosen for the top coat. The geared otors are also available unpainted (no surface and corrosion protection). Surface and corrosion protection syste OKS-G (pried) OKS-S (sall) OKS-M (ediu) OKS-L (high) Applications Catalogue text Measures Catalogue text 2K PUR priing coat (grey) Zinc-coated screws Dependent on subsequent Rust-free breather eleents top coat applied Optional easures Stainless steel naeplate Surface coating as per corrosivity category C1 (in line with EN Standard applications 2) Internal installation in heated Zinc-coated screws buildings Rust-free breather eleents Air huidity up to 90% Optional easures Stainless steel naeplate Surface coating as per corrosivity category C2 (in line with EN ) Internal installation in nonheated buildings Zinc-coated screws Rust-free breather eleents Covered, protected external Optional easures installation Stainless steel shaft Air huidity up to 95% Stainless steel naeplate Rust-free shrink disc (on request) Surface coating as per corrosivity category C3 (in line with EN ) Blower cover and B end shield additionally pried Cable glands with gaskets Corrosion-resistant brake with cover ring, stainless friction plate, and chroe-plated arature plate (on request) All screws/screw plugs zinc-coated External installation Stainless breather eleents Air huidity above 95% Threaded holes that are not used are closed by eans of plastic plugs Cheical industry plants Optional easures Food industry Sealed recesses on otor (on request) Stainless steel shaft Stainless steel naeplate Rust-free shrink disc (on request) Additional priing coat on cast iron fan Oil expansion tank and torque plates painted separately and supplied loose Lenze V02-en_GB-03/2014

81 GKS helical-bevel gearboxes General inforation Functions and features Structure of surface coating Surface and corrosion protection syste Corrosivity category DIN EN ISO Surface coating Structure Colour Without OKS (uncoated) OKS-G (pried) OKS-S (sall) OKS-M (ediu) OKS-L (high) C1 C2 C3 Dipping pried gearbox Dipping pried gearbox 2K PUR priing coat Dipping pried gearbox 2K-PUR top coat Dipping pried gearbox 2K PUR priing coat 2K-PUR top coat Dipping pried gearbox 2K PUR priing coat 2K-PUR top coat Standard: RAL 7012 Optional: RAL Classic Standard: RAL 7012 Optional: RAL Classic Standard: RAL 7012 Optional: RAL Classic 6.9 Lenze V02-en_GB-03/

82 GKS helical-bevel gearboxes General inforation Functions and features Ventilation Non-ventilated gearboxes No ventilation is required for gearbox GKS04. Gearboxes that ay optionally be equipped with ventilation Special easures are not usually required when using the GST05 gearbox. In borderline cases, e.g. at input speeds > 2000 rp, we recoend the use of breather eleents, which we can supply if required. Ventilated gearboxes Gearboxes GKS06 to 14 are supplied with breather eleents as standard. Special easures for ounting position C (otor on top) We recoend that an oil copensation reservoir is always used with gearbox sizes G 09 to 14 in this ounting position. This reservoir can be purchased as an option. For illustrations and easures, please refer to the Accessories chapter. This is not required at higher ratios or low input speeds. Please contact Lenze for confiration in this case Lenze V02-en_GB-03/2014

83 GKS helical-bevel gearboxes General inforation Diensioning General inforation about the data provided in this catalogue Powers, torques and speeds The powers, torques and speeds specified in this catalogue are rounded values and are valid under the following conditions: Operating tie/day = 8 h (100% OT) Duty class I for up to 10 switching operations/h Mounting positions and designs in this catalogue Standard lubricant T ab = 20 C for gearboxes, T ab = 40 C for otors (in accordance with EN 60034) Site altitude < = 1000 asl The selection tables provide the perissible echanical powers and torques. For notes on the theral power liit, see chapter drive diensioning. The rated power specified for otors and geared otors applies to operating ode S1 (in accordance with EN 60034). Under different operating conditions, the values obtained ay vary fro those listed here. In the case of extree operating conditions, please consult your Lenze sales office. 6.9 Lenze V02-en_GB-03/

84 GKS helical-bevel gearboxes General inforation Diensioning Theral power liit The theral power liit, defined by the heat balance, liits the perissible gearbox continuous power. It ay be less than the echanical power ratings listed in the selection tables. The theral power liit is affected by: the churning losses in the lubricant. These are deterined by the ounting position and the circuferential speed of the wheels the load and the speed the abient conditions: teperature, air circulation, input or dissipation via shafts and the foundation Please consult your Lenze sales office if the following input speeds n 1 are exceeded on a continuous basis (continuous is defined as ore than 8 h/day): Motor frae size Mounting position A, B, E, F 3000 r/in 3000 r/in 2000 r/in Mounting position C, D 3000 r/in 1500 r/in 1500 r/in if the following input speeds n 1 are exceeded: Motor frae size Mounting position A, B, E, F 4000 r/in 4000 r/in 3000 r/in Mounting position C, D 3000 r/in 2000 r/in 1500 r/in or if you are using the following gearbox type, size and ratio cobinations at an input speed of n 1 > 1500 r/in: Gearbox type GKS helical-bevel gearbox Gearbox size 07, 09, 11, 14 Ratio i 25 Possible ways of extending the application area synthetic lubricant (option) shaft sealing rings ade fro FP aterial/viton (option) reduction in lubricant quantity cooling of the geared otor by eans of air convection on the achine/syste Lenze V02-en_GB-03/2014

85 GKS helical-bevel gearboxes General inforation Diensioning Load capacity and application factor Load capacity c of gearbox Rated value for the load capacity of Lenze geared otors. c is the ratio of the perissible rated torque of the gearbox to the rated torque supplied by the drive coponent (e.g. the built-in Lenze otor). The value of c ust always be greater than the value of the application factor k calculated for the application. Application factor k (according to DIN 3990) Takes into account the influence of teporally variable loads which are actually present during the anticipated operating tie of gearboxes and geared otors. k is deterined by: the type of load the load intensity teporal influences Duty class I II III Load type Sooth operation, sall or light jolts Uneven operation, average jolts Uneven operation, severe jolts and/or alternating load Application factor k 6.9 Lenze V02-en_GB-03/

86 GKS helical-bevel gearboxes General inforation Diensioning Torque derating at low otor frequencies Motor size-dependent torque reduction, taking into account the theral response during operation on the inverter. Torque characteristics A = Operation with integral fan and brake B = Operation with integral fan and brake control "Holding current reduction" You can use the Drive Solution Designer for precise drive diensioning. The Drive Solution Designer helps you to carry out a fast and highquality drive diensioning. The software includes well-founded and proven knowledge on drive applications and electro-echanical drive coponents. 6.9 Please contact your Lenze sales office Lenze V02-en_GB-03/2014

87 GKS helical-bevel gearboxes General inforation Diensioning Notes on the selection tables The selection tables show the available cobinations of gearbox type, nuber of stages, ratio and otor. They are used only to provide basic orientation. The following legend indicates the structure of the selection tables. 6.9 Lenze V02-en_GB-03/

88 GKS helical-bevel gearboxes General inforation Diensioning Notes on the selection tables Motor voltages The power values and torques indicated in the selection tables relate to the following otor voltages: 50 Hz : Δ 230 V / Y 400 V 60 Hz : 230 V or 460 V 87 Hz : Δ 400 V Operation at 87 Hz In 87 Hz operation, the three-phase AC otor (which is designed for a voltage of Δ 230 V / Y 400 V at 50 Hz) is operated on an inverter with 400 V rated voltage in a delta connection. It is iportant to note here that the inverter ust be configured for 87Hz output. This offers the following advantages over 50 Hz operation: the setting range of the otor is increased by a factor of the otor can then provide around 1.73 ties greater output, which in turn allows a saller and ore affordable otor to be selected for the application. the efficiency of the otor is also iproved Lenze V02-en_GB-03/2014

89 GKS helical-bevel gearboxes General inforation Notes on ordering We want to be sure that you receive the correct products in good tie. To allow us to achieve this we need: your address and your copany data our product key for the individual products in this catalogue your delivery date and delivery address Ordering procedure Please use the ordering inforation checklist to ensure that you provide all the ordering inforation required for the various products. The ordering inforation checklist, the product key, the basic versions, options, ounting position and position of the syste blocks will be found in the General Product key section. A list of Lenze's worldwide sales offices can be found on the Internet: Lenze V02-en_GB-03/

90 GKS helical-bevel gearboxes General inforation Ordering details checklist Lenze V02-en_GB-03/2014

91 GKS helical-bevel gearboxes General inforation Ordering details checklist 6.9 Lenze V02-en_GB-03/

92 GKS helical-bevel gearboxes General inforation Ordering details checklist Three-phase AC otors options Lenze V02-en_GB-03/2014

93 GKS helical-bevel gearboxes General inforation Ordering details checklist Three-phase AC otors options 6.9 Lenze V02-en_GB-03/

94 GKS helical-bevel gearboxes General inforation Lenze V02-en_GB-03/2014

95 GKS helical-bevel gearboxes Technical data Perissible radial and axial forces at output Perissible radial force F rad,per = in(f w x f α x F rad,ax ; f w x F rad,ax at n 2 16 r/in) Perissible axial force F ax,per = F ax,ax if F rad = 0 If F rad and F ax 0, please contact your Lenze sales office. Application of forces Effective direction factor f α at output shaft 6.9 Direction of rotation R Direction of rotation L Lenze V02-en_GB-03/

96 GKS helical-bevel gearboxes Technical data Perissible radial and axial forces at output Additional load factor f w at output shaft Solid shaft (V ) Solid shaft with flange (V K) Hollow shaft (H ) GKS -3/4 H Size Gearbox n 2 [r/in] Max. radial force, Hollow shaft F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax GKS GKS GKS GKS GKS GKS GKS Max. axial force, Hollow shaft F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax 6.9 GKS GKS GKS GKS GKS GKS GKS ƒ Application of force F rad : at hollow shaft end face (x = 0) ƒ F ax,ax only valid with F rad = 0 ƒ Neither radial nor axial forces are perissible for the hollow shaft with shrink disc (S ) Lenze V02-en_GB-03/2014

97 GKS helical-bevel gearboxes Technical data Perissible radial and axial forces at output GKS -3/4 V R Size Gearbox n 2 [r/in] GKS04 GKS05 GKS06 GKS07 F rad,ax F rad,ax F rad,ax Max. radial force, Solid shaft without flange F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax GKS09 1) GKS11 1) GKS GKS04 GKS05 GKS06 GKS07 F ax,ax F ax,ax F ax,ax Max. axial force, Solid shaft without flange F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax GKS09 1) GKS11 1) GKS ) Reinforced output shaft bearings are available on request for V R versions. ƒ Application of force F rad : centre of shaft journal (x = l/2) ƒ F ax,ax only valid with F rad = Lenze V02-en_GB-03/

98 GKS helical-bevel gearboxes Technical data Perissible radial and axial forces at output GKS -3/4 V K Size Gearbox n 2 [r/in] Max. radial force, Solid shaft with flange F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax GKS GKS GKS GKS GKS GKS GKS Max. axial force, Solid shaft with flange F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax GKS GKS GKS GKS GKS GKS GKS ƒ Application of force F rad : centre of shaft journal (x = l/2) ƒ F ax,ax only valid with F rad = Lenze V02-en_GB-03/2014

99 GKS helical-bevel gearboxes Technical data Output backlash in angular inutes ƒ Backlash ϕ depending on ratio i GKS04 to 14-3 GKS05 to Lenze V02-en_GB-03/

100 GKS helical-bevel gearboxes Technical data Moents of inertia GKS -3 ƒ Moent of inertia (J) depending on ratio i Gearbox GKS04 Gearbox GKS ƒ ƒ The oents of inertia relate to the drive shaft of the gearbox. The total oent of inertia is calculated by adding the values of the gearbox, otor and accessories Lenze V02-en_GB-03/2014

101 GKS helical-bevel gearboxes Technical data Moents of inertia GKS -3 ƒ Moent of inertia (J) depending on ratio i Gearbox GKS06 Gearbox GKS ƒ ƒ The oents of inertia relate to the drive shaft of the gearbox. The total oent of inertia is calculated by adding the values of the gearbox, otor and accessories. 6.9 Lenze V02-en_GB-03/

102 GKS helical-bevel gearboxes Technical data Moents of inertia GKS -3 ƒ Moent of inertia (J) depending on ratio i Gearbox GKS09 Gearbox GKS ƒ ƒ The oents of inertia relate to the drive shaft of the gearbox. The total oent of inertia is calculated by adding the values of the gearbox, otor and accessories Lenze V02-en_GB-03/2014

103 GKS helical-bevel gearboxes Technical data Moents of inertia GKS -3 ƒ Moent of inertia (J) depending on ratio i Gearbox J J J J J J J J J J J J J J J J J J J J J J J J J J J J J [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] GKS ƒ ƒ The oents of inertia relate to the drive shaft of the gearbox. The total oent of inertia is calculated by adding the values of the gearbox, otor and accessories. 6.9 Lenze V02-en_GB-03/

104 GKS helical-bevel gearboxes Technical data Moents of inertia GKS -4 ƒ Moent of inertia (J) depending on ratio i Gearbox GKS05 Gearbox GKS ƒ ƒ The oents of inertia relate to the drive shaft of the gearbox. The total oent of inertia is calculated by adding the values of the gearbox, otor and accessories Lenze V02-en_GB-03/2014

105 GKS helical-bevel gearboxes Technical data Moents of inertia GKS -4 ƒ Moent of inertia (J) depending on ratio i Gearbox GKS07 Gearbox GKS ƒ ƒ The oents of inertia relate to the drive shaft of the gearbox. The total oent of inertia is calculated by adding the values of the gearbox, otor and accessories. 6.9 Lenze V02-en_GB-03/

106 GKS helical-bevel gearboxes Technical data Moents of inertia GKS -4 ƒ Moent of inertia (J) depending on ratio i Gearbox GKS11 Gearbox GKS ƒ ƒ The oents of inertia relate to the drive shaft of the gearbox. The total oent of inertia is calculated by adding the values of the gearbox, otor and accessories Lenze V02-en_GB-03/2014

107 GKS helical-bevel gearboxes Technical data Weights GKS -3M HAR / HBR GKS04 GKS05 GKS06 GKS07 GKS09 GKS11 GKS14 080C C C C C C C C GKS07 GKS09 GKS11 GKS14 160C C C C C C C GKS -3M HAK GKS04 GKS05 GKS06 GKS07 GKS09 GKS11 GKS14 080C C C C C C C C GKS07 GKS09 GKS11 GKS14 160C C C C C C C ƒ Weights with oil filling for ounting position A; all values are approxiate. The weights relate to the basic version. Bear in ind that additional weights ay be needed, e.g. for otor options. 6.9 Lenze V02-en_GB-03/

108 GKS helical-bevel gearboxes Technical data Weights GKS -3M VAR / VBR GKS04 GKS05 GKS06 GKS07 GKS09 GKS11 GKS14 080C C C C C C C C GKS07 GKS09 GKS11 GKS14 160C C C C C C C GKS -3M VAK GKS04 GKS05 GKS06 GKS07 GKS09 GKS11 GKS14 080C C C C C C C C GKS07 GKS09 GKS11 GKS14 160C C C C C C C ƒ Weights with oil filling for ounting position A; all values are approxiate. The weights relate to the basic version. Bear in ind that additional weights ay be needed, e.g. for otor options Lenze V02-en_GB-03/2014

109 GKS helical-bevel gearboxes Technical data Weights GKS -3M SAR / SBR GKS04 GKS05 GKS06 GKS07 GKS09 GKS11 GKS14 080C C C C C C C C GKS07 GKS09 GKS11 GKS14 160C C C C C C C GKS -3M SAK GKS04 GKS05 GKS06 GKS07 GKS09 GKS11 GKS14 080C C C C C C C C GKS07 GKS09 GKS11 GKS14 160C C C C C C C ƒ Weights with oil filling for ounting position A; all values are approxiate. The weights relate to the basic version. Bear in ind that additional weights ay be needed, e.g. for otor options. 6.9 Lenze V02-en_GB-03/

110 GKS helical-bevel gearboxes Technical data Weights GKS -4M HAR / HBR GKS06 GKS07 GKS09 GKS11 GKS14 080C C C C C C C C C C C GKS -4M HAK GKS06 GKS07 GKS09 GKS11 GKS14 080C C C C C C C C C C C ƒ Weights with oil filling for ounting position A; all values are approxiate. The weights relate to the basic version. Bear in ind that additional weights ay be needed, e.g. for otor options Lenze V02-en_GB-03/2014

111 GKS helical-bevel gearboxes Technical data Weights GKS -4M VAR / VBR GKS06 GKS07 GKS09 GKS11 GKS14 080C C C C C C C C C C C GKS -4M VAK GKS06 GKS07 GKS09 GKS11 GKS14 080C C C C C C C C C C C ƒ Weights with oil filling for ounting position A; all values are approxiate. The weights relate to the basic version. Bear in ind that additional weights ay be needed, e.g. for otor options. 6.9 Lenze V02-en_GB-03/

112 GKS helical-bevel gearboxes Technical data Weights GKS -4M SAR / SBR GKS06 GKS07 GKS09 GKS11 GKS14 080C C C C C C C C C C C GKS -4M SAK GKS06 GKS07 GKS09 GKS11 GKS14 080C C C C C C C C C C C ƒ Weights with oil filling for ounting position A; all values are approxiate. The weights relate to the basic version. Bear in ind that additional weights ay be needed, e.g. for otor options Lenze V02-en_GB-03/2014

113 GKS helical-bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 0.75 kw nn 1410 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKS04-3M 080C GKS04-3M 080C GKS04-3M 080C GKS04-3M 080C GKS04-3M 080C GKS04-3M 080C GKS04-3M 080C GKS05-3M 080C GKS04-3M 080C GKS04-3M 080C GKS04-3M 080C GKS05-3M 080C GKS04-3M 080C GKS04-3M 080C GKS04-3M 080C GKS04-3M 080C GKS05-3M 080C GKS04-3M 080C GKS05-3M 080C GKS04-3M 080C GKS05-3M 080C GKS04-3M 080C GKS05-3M 080C GKS04-3M 080C GKS05-3M 080C GKS05-3M 080C GKS05-3M 080C GKS06-3M 080C GKS06-3M 080C GKS05-3M 080C GKS06-3M 080C GKS05-3M 080C GKS06-3M 080C GKS05-3M 080C GKS07-3M 080C GKS06-3M 080C GKS07-4M 080C GKS06-4M 080C GKS07-3M 080C GKS06-3M 080C32 Lenze V02-en_GB-03/

114 GKS helical-bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 0.75 kw nn 1410 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKS07-3M 080C GKS07-4M 080C GKS06-3M 080C GKS06-4M 080C GKS07-4M 080C GKS07-3M 080C GKS06-4M 080C GKS06-3M 080C GKS07-4M 080C GKS06-4M 080C GKS06-3M 080C GKS07-4M 080C GKS06-4M 080C GKS06-3M 080C GKS07-4M 080C GKS07-3M 080C GKS07-4M 080C GKS07-3M 080C GKS07-4M 080C GKS07-3M 080C GKS07-4M 080C GKS07-3M 080C GKS07-4M 080C GKS07-3M 080C GKS07-4M 080C GKS09-4M 080C GKS09-4M 080C GKS09-4M 080C GKS09-4M 080C GKS09-4M 080C GKS09-4M 080C GKS09-4M 080C GKS09-4M 080C GKS11-4M 080C GKS11-4M 080C GKS11-4M 080C GKS11-4M 080C GKS11-4M 080C GKS11-4M 080C32 Lenze V02-en_GB-03/2014

115 GKS helical-bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = kw nn 1430 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKS04-3M 090C GKS05-3M 090C GKS04-3M 090C GKS04-3M 090C GKS04-3M 090C GKS05-3M 090C GKS04-3M 090C GKS05-3M 090C GKS05-3M 090C GKS04-3M 090C GKS04-3M 090C GKS05-3M 090C GKS04-3M 090C GKS05-3M 090C GKS05-3M 090C GKS04-3M 090C GKS05-3M 090C GKS04-3M 090C GKS05-3M 090C GKS04-3M 090C GKS04-3M 090C GKS05-3M 090C GKS04-3M 090C GKS05-3M 090C GKS04-3M 090C GKS05-3M 090C GKS06-3M 090C GKS05-3M 090C GKS06-3M 090C GKS05-3M 090C GKS05-3M 090C GKS06-3M 090C GKS05-3M 090C GKS05-3M 090C GKS06-3M 090C GKS06-3M 090C GKS07-3M 090C GKS06-3M 090C GKS07-3M 090C GKS06-3M 090C12 Lenze V02-en_GB-03/

116 GKS helical-bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = kw nn 1430 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKS07-3M 090C GKS06-3M 090C GKS07-3M 090C GKS06-3M 090C GKS07-4M 090C GKS06-4M 090C GKS07-3M 090C GKS06-3M 090C GKS07-3M 090C GKS07-4M 090C GKS06-3M 090C GKS07-4M 090C GKS07-3M 090C GKS07-4M 090C GKS09-4M 090C GKS07-3M 090C GKS09-3M 090C GKS09-4M 090C GKS07-4M 090C GKS07-3M 090C GKS09-3M 090C GKS09-4M 090C GKS07-4M 090C GKS09-3M 090C GKS07-3M 090C GKS07-4M 090C GKS09-4M 090C GKS09-3M 090C GKS07-3M 090C GKS09-3M 090C GKS07-3M 090C GKS09-4M 090C GKS09-4M 090C GKS09-3M 090C GKS09-3M 090C GKS09-4M 090C GKS09-3M 090C GKS11-4M 090C GKS09-4M 090C GKS11-4M 090C12 Lenze V02-en_GB-03/2014

117 GKS helical-bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = kw nn 1430 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKS09-4M 090C GKS11-4M 090C GKS09-4M 090C GKS11-4M 090C GKS09-4M 090C GKS11-4M 090C GKS09-4M 090C GKS11-4M 090C GKS11-4M 090C GKS11-4M 090C GKS14-4M 090C GKS11-4M 090C GKS14-4M 090C GKS11-4M 090C GKS14-4M 090C GKS11-4M 090C GKS14-4M 090C GKS14-4M 090C GKS14-4M 090C Lenze V02-en_GB-03/

118 GKS helical-bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 1.5 kw nn 1435 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKS04-3M 090C GKS05-3M 090C GKS04-3M 090C GKS04-3M 090C GKS04-3M 090C GKS05-3M 090C GKS04-3M 090C GKS05-3M 090C GKS06-3M 090C GKS05-3M 090C GKS04-3M 090C GKS04-3M 090C GKS05-3M 090C GKS04-3M 090C GKS05-3M 090C GKS05-3M 090C GKS04-3M 090C GKS05-3M 090C GKS06-3M 090C GKS04-3M 090C GKS05-3M 090C GKS04-3M 090C GKS04-3M 090C GKS05-3M 090C GKS06-3M 090C GKS05-3M 090C GKS06-3M 090C GKS05-3M 090C GKS06-3M 090C GKS05-3M 090C GKS06-3M 090C GKS05-3M 090C GKS05-3M 090C GKS06-3M 090C GKS06-3M 090C GKS07-3M 090C GKS06-3M 090C GKS07-3M 090C GKS06-3M 090C GKS07-3M 090C32 Lenze V02-en_GB-03/2014

119 GKS helical-bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 1.5 kw nn 1435 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKS06-3M 090C GKS07-3M 090C GKS06-3M 090C GKS09-3M 090C GKS07-3M 090C GKS09-4M 090C GKS07-4M 090C GKS09-3M 090C GKS07-3M 090C GKS09-3M 090C GKS07-3M 090C GKS07-4M 090C GKS09-4M 090C GKS09-4M 090C GKS09-3M 090C GKS07-4M 090C GKS07-3M 090C GKS07-4M 090C GKS09-4M 090C GKS07-3M 090C GKS09-3M 090C GKS09-4M 090C GKS07-4M 090C GKS07-3M 090C GKS09-3M 090C GKS09-4M 090C GKS09-3M 090C GKS09-4M 090C GKS09-3M 090C GKS09-3M 090C GKS09-4M 090C GKS09-4M 090C GKS09-3M 090C GKS09-3M 090C GKS09-4M 090C GKS09-3M 090C GKS11-4M 090C GKS09-4M 090C GKS11-4M 090C GKS09-4M 090C32 Lenze V02-en_GB-03/

120 GKS helical-bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 1.5 kw nn 1435 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKS11-4M 090C GKS09-4M 090C GKS11-4M 090C GKS11-4M 090C GKS11-4M 090C GKS11-4M 090C GKS11-4M 090C GKS14-4M 090C GKS14-4M 090C GKS14-4M 090C GKS14-4M 090C GKS14-4M 090C GKS14-4M 090C Lenze V02-en_GB-03/2014

121 GKS helical-bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 2.2 kw nn 1445 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKS06-3M 100C GKS05-3M 100C GKS06-3M 100C GKS05-3M 100C GKS06-3M 100C GKS05-3M 100C GKS06-3M 100C GKS05-3M 100C GKS06-3M 100C GKS05-3M 100C GKS05-3M 100C GKS06-3M 100C GKS05-3M 100C GKS06-3M 100C GKS05-3M 100C GKS06-3M 100C GKS05-3M 100C GKS06-3M 100C GKS06-3M 100C GKS05-3M 100C GKS06-3M 100C GKS05-3M 100C GKS07-3M 100C GKS06-3M 100C GKS07-3M 100C GKS06-3M 100C GKS07-3M 100C GKS06-3M 100C GKS06-3M 100C GKS07-3M 100C GKS06-3M 100C GKS07-3M 100C GKS06-3M 100C GKS07-3M 100C GKS06-3M 100C GKS07-3M 100C GKS07-3M 100C GKS09-3M 100C GKS07-3M 100C GKS09-3M 100C12 Lenze V02-en_GB-03/

122 GKS helical-bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 2.2 kw nn 1445 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKS09-3M 100C GKS07-3M 100C GKS09-4M 100C GKS07-4M 100C GKS09-3M 100C GKS07-3M 100C GKS11-3M 100C GKS09-3M 100C GKS07-3M 100C GKS09-4M 100C GKS09-4M 100C GKS11-3M 100C GKS09-3M 100C GKS09-4M 100C GKS11-3M 100C GKS09-3M 100C GKS11-4M 100C GKS09-4M 100C GKS11-4M 100C GKS11-3M 100C GKS09-3M 100C GKS09-4M 100C GKS11-4M 100C GKS09-3M 100C GKS11-3M 100C GKS11-4M 100C GKS09-4M 100C GKS09-3M 100C GKS11-3M 100C GKS09-3M 100C GKS11-3M 100C GKS11-4M 100C GKS09-4M 100C GKS11-4M 100C GKS09-4M 100C GKS09-3M 100C GKS11-3M 100C GKS11-4M 100C GKS09-4M 100C GKS11-3M 100C12 Lenze V02-en_GB-03/2014

123 GKS helical-bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 2.2 kw nn 1445 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKS14-4M 100C GKS11-3M 100C GKS11-4M 100C GKS14-4M 100C GKS11-4M 100C GKS14-4M 100C GKS11-4M 100C GKS14-4M 100C GKS11-4M 100C GKS11-4M 100C GKS14-4M 100C GKS14-4M 100C GKS14-4M 100C GKS14-4M 100C GKS14-4M 100C GKS14-4M 100C GKS14-4M 100C Lenze V02-en_GB-03/

124 GKS helical-bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 3.0 kw nn 1445 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKS06-3M 100C GKS05-3M 100C GKS06-3M 100C GKS05-3M 100C GKS06-3M 100C GKS05-3M 100C GKS07-3M 100C GKS06-3M 100C GKS05-3M 100C GKS06-3M 100C GKS05-3M 100C GKS06-3M 100C GKS05-3M 100C GKS06-3M 100C GKS05-3M 100C GKS07-3M 100C GKS06-3M 100C GKS05-3M 100C GKS06-3M 100C GKS06-3M 100C GKS07-3M 100C GKS06-3M 100C GKS07-3M 100C GKS06-3M 100C GKS07-3M 100C GKS06-3M 100C GKS07-3M 100C GKS06-3M 100C GKS06-3M 100C GKS07-3M 100C GKS06-3M 100C GKS07-3M 100C GKS07-3M 100C GKS09-3M 100C GKS07-3M 100C GKS09-3M 100C GKS07-3M 100C GKS09-3M 100C GKS07-3M 100C GKS09-3M 100C32 Lenze V02-en_GB-03/2014

125 GKS helical-bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 3.0 kw nn 1445 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKS11-3M 100C GKS09-3M 100C GKS09-4M 100C GKS11-4M 100C GKS11-3M 100C GKS09-3M 100C GKS11-3M 100C GKS09-3M 100C GKS09-4M 100C GKS11-4M 100C GKS09-4M 100C GKS11-4M 100C GKS11-3M 100C GKS09-3M 100C GKS09-4M 100C GKS11-3M 100C GKS09-3M 100C GKS11-4M 100C GKS09-4M 100C GKS11-4M 100C GKS11-3M 100C GKS09-3M 100C GKS09-4M 100C GKS11-4M 100C GKS09-3M 100C GKS11-3M 100C GKS11-4M 100C GKS09-4M 100C GKS11-3M 100C GKS11-3M 100C GKS11-4M 100C GKS11-4M 100C GKS11-3M 100C GKS11-4M 100C GKS11-3M 100C GKS14-4M 100C GKS11-3M 100C GKS11-4M 100C GKS14-4M 100C GKS11-4M 100C32 Lenze V02-en_GB-03/

126 GKS helical-bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 3.0 kw nn 1445 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKS14-4M 100C GKS11-4M 100C GKS14-4M 100C GKS14-4M 100C GKS14-4M 100C GKS14-4M 100C GKS14-4M 100C Lenze V02-en_GB-03/2014

127 GKS helical-bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 4.0 kw nn 1455 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKS07-3M 112C GKS06-3M 112C GKS07-3M 112C GKS07-3M 112C GKS06-3M 112C GKS07-3M 112C GKS06-3M 112C GKS07-3M 112C GKS06-3M 112C GKS06-3M 112C GKS07-3M 112C GKS07-3M 112C GKS06-3M 112C GKS07-3M 112C GKS06-3M 112C GKS07-3M 112C GKS06-3M 112C GKS06-3M 112C GKS07-3M 112C GKS06-3M 112C GKS07-3M 112C GKS07-3M 112C GKS06-3M 112C GKS07-3M 112C GKS06-3M 112C GKS07-3M 112C GKS07-3M 112C GKS09-3M 112C GKS07-3M 112C GKS09-3M 112C GKS07-3M 112C GKS09-3M 112C GKS07-3M 112C GKS07-3M 112C GKS09-3M 112C GKS09-3M 112C GKS11-3M 112C GKS09-3M 112C GKS11-3M 112C GKS09-3M 112C22 Lenze V02-en_GB-03/

128 GKS helical-bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 4.0 kw nn 1455 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKS14-3M 112C GKS11-3M 112C GKS09-3M 112C GKS09-4M 112C GKS14-3M 112C GKS11-4M 112C GKS11-3M 112C GKS09-3M 112C GKS14-3M 112C GKS11-3M 112C GKS09-3M 112C GKS09-4M 112C GKS11-4M 112C GKS09-4M 112C GKS14-3M 112C GKS11-4M 112C GKS11-3M 112C GKS09-3M 112C GKS14-3M 112C GKS09-4M 112C GKS11-3M 112C GKS11-4M 112C GKS09-4M 112C GKS11-4M 112C GKS14-3M 112C GKS14-4M 112C GKS11-3M 112C GKS11-4M 112C GKS14-4M 112C GKS11-3M 112C GKS14-3M 112C GKS14-4M 112C GKS11-4M 112C GKS11-3M 112C GKS14-3M 112C GKS14-4M 112C GKS11-3M 112C GKS14-3M 112C GKS11-4M 112C GKS14-4M 112C22 Lenze V02-en_GB-03/2014

129 GKS helical-bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 4.0 kw nn 1455 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKS11-4M 112C GKS11-3M 112C GKS14-3M 112C GKS14-4M 112C GKS11-4M 112C GKS11-3M 112C GKS14-3M 112C GKS14-4M 112C GKS14-3M 112C GKS14-4M 112C GKS14-4M 112C GKS14-4M 112C GKS14-4M 112C GKS14-4M 112C Lenze V02-en_GB-03/

130 GKS helical-bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 5.5 kw nn 1470 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKS07-3M 132C GKS06-3M 132C GKS07-3M 132C GKS07-3M 132C GKS06-3M 132C GKS07-3M 132C GKS06-3M 132C GKS07-3M 132C12 1 GKS06-3M 132C GKS06-3M 132C GKS07-3M 132C GKS07-3M 132C GKS06-3M 132C GKS07-3M 132C GKS06-3M 132C GKS07-3M 132C GKS06-3M 132C GKS06-3M 132C GKS07-3M 132C GKS07-3M 132C GKS07-3M 132C GKS07-3M 132C GKS09-3M 132C GKS07-3M 132C GKS09-3M 132C GKS09-3M 132C GKS07-3M 132C GKS09-3M 132C GKS07-3M 132C GKS09-3M 132C GKS07-3M 132C GKS09-3M 132C GKS11-3M 132C GKS09-3M 132C GKS11-3M 132C GKS09-3M 132C GKS11-3M 132C GKS09-3M 132C GKS11-3M 132C GKS09-3M 132C12 Lenze V02-en_GB-03/2014

131 GKS helical-bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 5.5 kw nn 1470 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKS11-3M 132C GKS14-4M 132C GKS11-4M 132C GKS11-3M 132C GKS14-4M 132C GKS14-3M 132C GKS11-3M 132C GKS11-4M 132C GKS14-4M 132C GKS14-3M 132C GKS11-4M 132C GKS11-3M 132C GKS14-4M 132C GKS14-3M 132C GKS11-4M 132C GKS11-4M 132C GKS14-3M 132C GKS14-4M 132C GKS11-4M 132C GKS14-4M 132C GKS11-3M 132C GKS14-3M 132C GKS14-4M 132C GKS11-4M 132C GKS11-3M 132C GKS14-3M 132C GKS14-4M 132C GKS14-3M 132C GKS14-4M 132C GKS14-3M 132C GKS14-4M 132C GKS14-3M 132C GKS14-4M 132C GKS14-3M 132C GKS14-4M 132C GKS14-4M 132C12 Lenze V02-en_GB-03/

132 GKS helical-bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 7.5 kw nn 1460 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKS07-3M 132C GKS06-3M 132C GKS07-3M 132C GKS07-3M 132C GKS06-3M 132C GKS07-3M 132C GKS06-3M 132C GKS07-3M 132C GKS09-3M 132C GKS07-3M 132C GKS09-3M 132C GKS07-3M 132C GKS06-3M 132C GKS09-3M 132C GKS07-3M 132C GKS07-3M 132C GKS09-3M 132C GKS09-3M 132C GKS07-3M 132C GKS09-3M 132C GKS07-3M 132C GKS07-3M 132C GKS09-3M 132C GKS07-3M 132C GKS09-3M 132C GKS09-3M 132C GKS09-3M 132C GKS09-3M 132C GKS11-3M 132C GKS09-3M 132C GKS11-3M 132C GKS09-3M 132C GKS11-3M 132C GKS11-3M 132C GKS09-3M 132C GKS11-3M 132C GKS09-3M 132C GKS11-3M 132C GKS09-3M 132C GKS14-3M 132C22 Lenze V02-en_GB-03/2014

133 GKS helical-bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 7.5 kw nn 1460 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKS11-3M 132C GKS09-3M 132C GKS14-3M 132C GKS11-3M 132C GKS14-4M 132C GKS14-3M 132C GKS11-4M 132C GKS11-3M 132C GKS14-4M 132C GKS14-3M 132C GKS11-3M 132C GKS11-4M 132C GKS14-4M 132C GKS14-3M 132C GKS11-4M 132C GKS11-3M 132C GKS14-4M 132C GKS14-3M 132C GKS11-4M 132C GKS11-4M 132C GKS14-3M 132C GKS14-4M 132C GKS14-4M 132C GKS14-3M 132C GKS14-4M 132C GKS14-3M 132C GKS14-4M 132C GKS14-3M 132C GKS14-4M 132C GKS14-3M 132C GKS14-4M 132C GKS14-3M 132C Lenze V02-en_GB-03/

134 GKS helical-bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 1 kw nn 1470 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKS07-3M 160C GKS07-3M 160C GKS07-3M 160C GKS07-3M 160C GKS09-3M 160C GKS07-3M 160C GKS09-3M 160C GKS07-3M 160C GKS11-3M 160C GKS09-3M 160C GKS07-3M 160C GKS11-3M 160C GKS07-3M 160C GKS09-3M 160C GKS09-3M 160C GKS09-3M 160C GKS11-3M 160C GKS09-3M 160C GKS11-3M 160C GKS09-3M 160C GKS11-3M 160C GKS09-3M 160C GKS09-3M 160C GKS11-3M 160C GKS09-3M 160C GKS11-3M 160C GKS09-3M 160C GKS11-3M 160C GKS09-3M 160C GKS11-3M 160C GKS14-3M 160C GKS11-3M 160C GKS14-3M 160C GKS11-3M 160C GKS14-3M 160C GKS11-3M 160C GKS14-3M 160C GKS11-3M 160C GKS14-3M 160C GKS14-4M 160C22 Lenze V02-en_GB-03/2014

135 GKS helical-bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 1 kw nn 1470 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKS14-3M 160C GKS14-4M 160C GKS14-3M 160C GKS14-4M 160C GKS14-3M 160C GKS14-4M 160C GKS14-4M 160C GKS14-4M 160C GKS14-3M 160C GKS14-4M 160C GKS14-3M 160C Lenze V02-en_GB-03/

136 GKS helical-bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 15.0 kw nn 1470 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKS07-3M 160C GKS07-3M 160C GKS07-3M 160C GKS11-3M 160C GKS09-3M 160C GKS11-3M 160C GKS09-3M 160C GKS11-3M 160C GKS09-3M 160C GKS11-3M 160C GKS09-3M 160C GKS11-3M 160C GKS09-3M 160C GKS11-3M 160C GKS09-3M 160C GKS11-3M 160C GKS09-3M 160C GKS11-3M 160C GKS09-3M 160C GKS11-3M 160C GKS09-3M 160C GKS14-3M 160C GKS09-3M 160C GKS11-3M 160C GKS14-3M 160C GKS09-3M 160C GKS11-3M 160C GKS14-3M 160C GKS11-3M 160C GKS14-3M 160C GKS11-3M 160C GKS14-3M 160C GKS11-3M 160C GKS14-3M 160C GKS11-3M 160C GKS14-3M 160C GKS11-3M 160C GKS14-3M 160C GKS11-3M 160C GKS14-3M 160C32 Lenze V02-en_GB-03/2014

137 GKS helical-bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 15.0 kw nn 1470 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKS14-4M 160C GKS14-3M 160C GKS14-4M 160C GKS14-3M 160C GKS14-4M 160C GKS14-3M 160C GKS14-4M 160C GKS14-4M 160C Lenze V02-en_GB-03/

138 GKS helical-bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 18.5 kw nn 1475 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKS11-3M 180C GKS09-3M 180C GKS11-3M 180C GKS09-3M 180C GKS11-3M 180C GKS09-3M 180C GKS14-3M 180C GKS11-3M 180C GKS09-3M 180C GKS14-3M 180C GKS11-3M 180C GKS09-3M 180C GKS11-3M 180C GKS09-3M 180C GKS14-3M 180C GKS11-3M 180C GKS09-3M 180C GKS14-3M 180C GKS11-3M 180C GKS09-3M 180C GKS14-3M 180C GKS11-3M 180C GKS14-3M 180C GKS11-3M 180C GKS14-3M 180C GKS11-3M 180C GKS14-3M 180C GKS11-3M 180C GKS14-3M 180C GKS11-3M 180C GKS14-3M 180C GKS11-3M 180C GKS14-3M 180C GKS11-3M 180C GKS14-3M 180C GKS14-3M 180C GKS14-3M 180C GKS14-4M 180C GKS14-3M 180C GKS14-4M 180C12 Lenze V02-en_GB-03/2014

139 GKS helical-bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 18.5 kw nn 1475 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKS14-3M 180C GKS14-4M 180C GKS14-3M 180C Lenze V02-en_GB-03/

140 GKS helical-bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 22.0 kw nn 1470 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKS11-3M 180C GKS09-3M 180C GKS11-3M 180C GKS09-3M 180C GKS11-3M 180C GKS09-3M 180C GKS14-3M 180C GKS11-3M 180C GKS09-3M 180C GKS14-3M 180C GKS11-3M 180C GKS09-3M 180C GKS11-3M 180C GKS09-3M 180C GKS14-3M 180C GKS11-3M 180C GKS09-3M 180C GKS14-3M 180C GKS11-3M 180C GKS14-3M 180C GKS11-3M 180C GKS14-3M 180C GKS11-3M 180C GKS14-3M 180C GKS11-3M 180C GKS14-3M 180C GKS11-3M 180C GKS14-3M 180C GKS11-3M 180C GKS14-3M 180C GKS14-3M 180C GKS14-3M 180C GKS14-3M 180C GKS14-3M 180C GKS14-3M 180C32 Lenze V02-en_GB-03/2014

141 GKS helical-bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 30.0 kw nn 1465 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKS11-3M 180C GKS11-3M 180C GKS11-3M 180C GKS14-3M 180C GKS11-3M 180C GKS14-3M 180C GKS11-3M 180C GKS11-3M 180C GKS14-3M 180C GKS11-3M 180C GKS14-3M 180C GKS11-3M 180C GKS14-3M 180C GKS11-3M 180C GKS14-3M 180C GKS11-3M 180C GKS14-3M 180C GKS14-3M 180C GKS14-3M 180C GKS14-3M 180C GKS14-3M 180C GKS14-3M 180C 6.9 Lenze V02-en_GB-03/

142 GKS helical-bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 37.0 kw nn 1483 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKS11-3M 225C GKS14-3M 225C GKS11-3M 225C GKS14-3M 225C GKS11-3M 225C GKS14-3M 225C GKS11-3M 225C GKS14-3M 225C GKS11-3M 225C GKS14-3M 225C GKS11-3M 225C GKS14-3M 225C GKS14-3M 225C GKS11-3M 225C GKS14-3M 225C GKS11-3M 225C GKS14-3M 225C GKS14-3M 225C GKS14-3M 225C GKS14-3M 225C GKS14-3M 225C GKS14-3M 225C GKS14-3M 225C Lenze V02-en_GB-03/2014

143 GKS helical-bevel gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 45.0 kw nn 1480 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GKS11-3M 225C GKS14-3M 225C GKS11-3M 225C GKS14-3M 225C GKS14-3M 225C GKS14-3M 225C GKS11-3M 225C GKS14-3M 225C GKS11-3M 225C GKS14-3M 225C GKS14-3M 225C GKS14-3M 225C GKS14-3M 225C GKS14-3M 225C GKS14-3M 225C GKS14-3M 225C GKS14-3M 225C Lenze V02-en_GB-03/

144 GKS helical-bevel gearboxes Technical data Diensions GKS -3M H R k 080C32 090C12 090C32 100C12 100C32 112C22 g g 1 MHEMAXX MHEMABR MHEMAXX k MHEMABR Δ k MHFMAXX MHFMABR k GKS GKS GKS GKS GKS GKS GKS Lenze V02-en_GB-03/2014

145 GKS helical-bevel gearboxes Technical data k 132C12 160C22 160C32 180C12 180C 225C12 132C22 180C32 225C22 g g 1 MHEMAXX MHEMABR MHEMAXX k MHEMABR Δ k MHFMAXX MHFMABR k GKS GKS GKS GKS GKS a h 1) h 1 o p 1) GKS GKS GKS GKS GKS GKS GKS d d 1 l 1) l 1 u t i 1 a 1 b 1 e 1 f 1 s 1 GKS04 GKS05 GKS06 GKS07 GKS09 GKS11 GKS14 H JS , H M6x12 M8x15 M10x16 M12x18 M16x24 M20x32 M24x35 a 5 a 6 b 5 b 6 b 7 c 5 e 5 f 5 f 6 n s 5 GKS04 GKS GKS GKS GKS GKS GKS ) k 2! Lenze V02-en_GB-03/

146 GKS helical-bevel gearboxes Technical data Diensions GKS -3M HAK k 080C32 090C12 090C32 100C12 100C32 112C22 g g 1 MHEMAXX MHEMABR MHEMAXX k MHEMABR Δ k MHFMAXX MHFMABR k GKS GKS GKS GKS GKS GKS GKS Lenze V02-en_GB-03/2014

147 GKS helical-bevel gearboxes Technical data k 132C12 160C22 160C32 180C12 180C 225C12 132C22 180C32 225C22 g g 1 MHEMAXX MHEMABR MHEMAXX k MHEMABR Δ k MHFMAXX MHFMABR k GKS GKS GKS GKS GKS a h 1) h 1 k 8 o p 1) q GKS GKS GKS GKS GKS GKS GKS d d 1 l l 1 u t i 2 o 1 1) a 2 b 2 c 2 e 2 f 2 s 2 GKS04 GKS05 GKS06 GKS07 GKS09 GKS11 GKS14 H JS , j x 9 4 x 11 4 x 11 4 x 14 4 x 14 4 x 14 4 x x x x ) k 2! 6.9 Lenze V02-en_GB-03/

148 GKS helical-bevel gearboxes Technical data Diensions GKS -3M V R k 080C32 090C12 090C32 100C12 100C32 112C22 g g 1 MHEMAXX MHEMABR MHEMAXX k MHEMABR Δ k MHFMAXX MHFMABR k GKS GKS GKS GKS GKS GKS GKS Lenze V02-en_GB-03/2014

149 GKS helical-bevel gearboxes Technical data k 132C12 160C22 160C32 180C12 180C 225C12 132C22 180C32 225C22 g g 1 MHEMAXX MHEMABR MHEMAXX k MHEMABR Δ k MHFMAXX MHFMABR k GKS GKS GKS GKS GKS a h 1) h 1 o p 1) q GKS GKS GKS GKS GKS GKS GKS d d d 1 d 2 l l 1 l 2 u t i 1 o 1 1) a 1 b 1 e 1 f 1 s 1 k6 6 H7 GKS M M6x12 GKS M M8x15 GKS M M10x16 GKS M M12x18 GKS M M16x24 GKS M M20x32 GKS M M24x35 a 5 a 6 b 5 b 6 b 7 c 5 e 5 f 5 f 6 n s 5 GKS GKS GKS GKS07 GKS GKS GKS ) k 2! Lenze V02-en_GB-03/

150 GKS helical-bevel gearboxes Technical data Diensions GKS -3M VAK k 080C32 090C12 090C32 100C12 100C32 112C22 g g 1 MHEMAXX MHEMABR MHEMAXX k MHEMABR Δ k MHFMAXX MHFMABR k GKS GKS GKS GKS GKS GKS GKS Lenze V02-en_GB-03/2014

151 GKS helical-bevel gearboxes Technical data k 132C12 160C22 160C32 180C12 180C 225C12 132C22 180C32 225C22 g g 1 MHEMAXX MHEMABR MHEMAXX k MHEMABR Δ k MHFMAXX MHFMABR k GKS GKS GKS GKS GKS a h 1) h 1 k 8 o p 1) q GKS GKS GKS GKS GKS GKS GKS d d d 2 l l 1 l 2 u t i 2 o 1 1) a 2 b 2 c 2 e 2 f 2 s 2 k6 6 j7 GKS04 25 M x 9 GKS05 30 M x 11 GKS06 GKS07 GKS09 GKS11 GKS M16 M16 M20 M20 M x 14 4 x 14 4 x 14 4 x x x x ) k 2! 6.9 Lenze V02-en_GB-03/

152 GKS helical-bevel gearboxes Technical data Diensions GKS -4M H R k 080C32 090C12 090C32 100C12 g g 1 MHEMAXX MHEMABR MHEMAXX k MHEMABR Δ k MHFMAXX MHFMABR k GKS GKS GKS GKS GKS C Lenze V02-en_GB-03/2014

153 GKS helical-bevel gearboxes Technical data k 112C22 132C12 160C22 160C32 180C12 132C22 g g 1 MHEMAXX MHEMABR MHEMAXX k MHEMABR Δ k MHFMAXX MHFMABR k GKS GKS GKS a h h 1 o p GKS GKS GKS GKS GKS d d 1 l l 1 u t i 1 a 1 b 1 e 1 f 1 s 1 GKS06 GKS07 GKS09 GKS11 GKS14 H JS , H M10x16 M12x18 M16x24 M20x32 M24x35 a 5 a 6 b 5 b 6 b 7 c 5 e 5 f 5 f 6 n s 5 GKS GKS GKS GKS GKS Lenze V02-en_GB-03/

154 GKS helical-bevel gearboxes Technical data Diensions GKS -4M HAK k 080C32 090C12 090C32 100C12 g g 1 MHEMAXX MHEMABR MHEMAXX k MHEMABR Δ k MHFMAXX MHFMABR k GKS GKS GKS GKS GKS C Lenze V02-en_GB-03/2014

155 GKS helical-bevel gearboxes Technical data k 112C22 132C12 160C22 160C32 180C12 132C22 g g 1 MHEMAXX MHEMABR MHEMAXX k MHEMABR Δ k MHFMAXX MHFMABR k GKS GKS GKS a h h 1 k 8 o p q GKS GKS GKS GKS GKS d d 1 l l 1 u t i 2 o 1 a 2 b 2 c 2 e 2 f 2 s 2 GKS06 GKS07 GKS09 GKS11 GKS14 H JS , j x 11 4 x 14 4 x 14 4 x 14 4 x x x x Lenze V02-en_GB-03/

156 GKS helical-bevel gearboxes Technical data Diensions GKS -4M V R k 080C32 090C12 090C32 100C12 g g 1 MHEMAXX MHEMABR MHEMAXX k MHEMABR Δ k MHFMAXX MHFMABR k GKS GKS GKS GKS GKS C Lenze V02-en_GB-03/2014

157 GKS helical-bevel gearboxes Technical data k 112C22 132C12 160C22 160C32 180C12 132C22 g g 1 MHEMAXX MHEMABR MHEMAXX k MHEMABR Δ k MHFMAXX MHFMABR k GKS GKS GKS a h h 1 o p q GKS GKS GKS GKS GKS d d d 1 d 2 l l 1 l 2 u t i 1 o 1 a 1 b 1 e 1 f 1 s 1 k6 6 H7 GKS M M10x16 GKS M M12x18 GKS M M16x24 GKS M M20x32 GKS M M24x35 a 5 a 6 b 5 b 6 b 7 c 5 e 5 f 5 f 6 n s 5 GKS GKS GKS GKS GKS Lenze V02-en_GB-03/

158 GKS helical-bevel gearboxes Technical data Diensions GKS -4M VAK k 080C32 090C12 090C32 100C12 g g 1 MHEMAXX MHEMABR MHEMAXX k MHEMABR Δ k MHFMAXX MHFMABR k GKS GKS GKS GKS GKS C Lenze V02-en_GB-03/2014

159 GKS helical-bevel gearboxes Technical data k 112C22 132C12 160C22 160C32 180C12 132C22 g g 1 MHEMAXX MHEMABR MHEMAXX k MHEMABR Δ k MHFMAXX MHFMABR k GKS GKS GKS a h h 1 k 8 o p q GKS GKS GKS GKS GKS d d d 2 l l 1 l 2 u t i 2 o 1 a 2 b 2 c 2 e 2 f 2 s 2 k6 6 j7 GKS06 GKS07 GKS09 GKS11 GKS M16 M16 M20 M20 M x 14 4 x 14 4 x 14 4 x x x x Lenze V02-en_GB-03/

160 GKS helical-bevel gearboxes Technical data Lenze V02-en_GB-03/2014

161 GKS helical-bevel gearboxes Accessories Hollow shaft with shrink disc d h6 g 2 g 3 g 4 i 1 k 9 k 10 k 11 l l 1 l 4 GKS04 GKS GKS GKS GKS GKS GKS ƒ ƒ Output flange and hollow shaft with shrink disc (output version SAK) are not possible in the sae location. For additional diensions see output version H. Ensure that the strength of the achine shaft aterial is adequate in shrink disc designs. When using typical steels, e.g. C45, CrMo4, the torques listed in the selection tables can be used without restriction. Please consult us if you wish to use aterial that is considerably weaker. Mediu surface roughness Rz ust not exceed 15 µ (turning is sufficient). 6.9 Lenze V02-en_GB-03/

162 GKS helical-bevel gearboxes Accessories Mounting set for hollow shaft circlip: Proposed design for auxiliary tools d l 1 d 2 l 9 c 7 c 8 c 9 l 8, ax H7 GKS04 GKS M10 M GKS M GKS07 GKS09 GKS M GKS M Lenze V02-en_GB-03/2014

163 GKS helical-bevel gearboxes Accessories Hoseproof hollow shaft cover ƒ Cover including gasket GKS04 GKS05 GKS06 GKS07 GKS09 GKS11 GKS14 k k g Lenze V02-en_GB-03/

164 GKS helical-bevel gearboxes Accessories Gearboxes with 2nd output shaft end d k6 d 6 l i 1 o 1 GKS GKS GKS GKS GKS GKS GKS Lenze V02-en_GB-03/2014

165 GKS helical-bevel gearboxes Accessories Torque plate on threaded pitch circle In position 3 In position GKS04 GKS05 GKS06 GKS07 a 4 a 7 a 8 a 9 b 4 d D k Lenze V02-en_GB-03/

166 GKS helical-bevel gearboxes Accessories Torque plate at housing foot In position 2, 4 or 6 GKS04 GKS05 GKS06 GKS07 GKS09 GKS11 GKS14 a 4 a 7 a 8 a 9 b 8 c d D e 5 k Lenze V02-en_GB-03/2014

167 GKS helical-bevel gearboxes Accessories Ventilations Position of ventilation, sealing eleents and oil level check GKS A to F Mounting position Ite 1 standard Ventilation / Oil filler plug Ite 2 only with: Oil drain plug GKS05-3M 090C Oil control plug GKS05-3M 100C * On both sides GKS06-3M 112C ** On opposite side GKS07-3M 160C 6.9 Lenze V02-en_GB-03/

168 GKS helical-bevel gearboxes Accessories Ventilations Position of ventilation, sealing eleents and oil level check GKS A to F Mounting position Ite 1 standard Ventilation / Oil filler plug Ite 2 only with: Oil drain plug GKS07-4M 090C Oil control plug GKS07-4M 100C * On both sides GKS09-4M 112C ** On opposite side Lenze V02-en_GB-03/2014

169 GKS helical-bevel gearboxes Accessories Ventilations Copensation reservoir for ounting position C GKS -3 Motor o 5 o 6 o 5 o 6 o 5 o 6 o 5 o 6 [] [] [] [] [] [] [] [] GKS09 GKS GKS ƒ Terinal box position 4 not peritted. Lenze V02-en_GB-03/

170 GKS helical-bevel gearboxes Accessories Lenze V02-en_GB-03/2014

171 Gearboxes GSS helical-wor gearboxes kw

172

173 GSS helical-wor gearboxes Contents General inforation Technical data Accessories List of abbreviations Product key Product inforation Functions and features Diensioning Notes on ordering Ordering details checklist Perissible radial and axial forces at output Moents of inertia Efficiencies Weights Selection tables Diensions Hollow shaft with shrink disc Mounting set for hollow shaft circlip: Proposed design for auxiliary tools Hoseproof hollow shaft cover Gearboxes with 2nd output shaft end Torque plate on threaded pitch circle Torque plate at housing foot Ventilations

174 GSS helical-wor gearboxes General inforation List of abbreviations η c=1 c f N F ax,ax F rad,ax H ax i J M 2 n 2 n N P N S hü T opr,ax T opr,in U N, Δ U N, Y [Hz] [] [kgc²] [N] [r/in] [r/in] [kw] [1/h] [ C] [ C] [V] [V] Efficiency Load capacity Rated frequency Max. axial force Max. radial force Site altitude Ratio Moent of inertia Mass Output torque Output speed Rated speed Rated power Transition operating frequency Max. abient operating teperature Min. abient operating teperature Rated voltage Rated voltage CE CSA DIN EMC EN IEC IM IP NEMA UL UR VDE CCC GOST curus UkrSEPRO Counauté Européenne Canadian Standards Association Deutsches Institut für Norung e.v. Electroagnetic copatibility European standard International Electrotechnical Coission International Mounting Code International Protection Code National Electrical Manufacturers Association Underwriters Laboratory Listed Product Underwriters Laboratory Recognized Product Verband deutscher Elektrotechniker (Association of Geran Electrical Engineers) China Copulsory Certificate Certificate for Russian Federation Cobined certification arks of UL for the USA and Canada Certificate for Ukraine V00-en_GB-12/2013

175 GSS helical-wor gearboxes General inforation Product key 6.10 V00-en_GB-12/

176 GSS helical-wor gearboxes General inforation Product key Mounting position (A...F) and position of syste blocks (1...6) Hollow shaft: 0 Solid shaft: 3, 5, 8 (3+5) Hollow shaft with shrink disc: 3, 5 Without flange: 0 Flange: 3, 5, 8 (3+5) Terinal box / otec: 2, 3, 4, 5 Gearbox designs 6.10 Basic versions Motor efficiency Surface and corrosion protection Lubricant Ventilation Standard efficiency Increased efficiency (IE2) OKS-G (prier: grey) OKS-S (paint: RAL 7012) CLP PG 460 (synthetic) Oil control plugs for GSS Breather eleents for GSS05 07 Options Surface and corrosion protection Lubricant Shaft sealing rings Accessories Naeplate OKS-S (special paint according to RAL) OKS-M (special paint according to RAL) OKS-L (special paint according to RAL) CLP HC 220 USDA H1 (synthetic) Driven shaft: Viton Torque plate on threaded pitch circle Housing foot torque plate 2nd output shaft end Shrink disc cover Hoseproof hollow shaft cover Mounting set for hollow shaft circlip Metal naeplate (supplied loose) Adhesive naeplate (supplied loose) V00-en_GB-12/2013

177 GSS helical-wor gearboxes General inforation Product inforation Lenze provides a geared otor construction kit, which covers a wide range of requireents. Nuerous drive-side and output-side options enable precise adaptation of the drive to the specific application. This is the basis for versatile applications and functional scalability of our gearboxes and geared otors. The odular concept and high power density ake extreely copact sizes possible. Optiised teeth profiles and ground gears ensure low-noise operation and low backlash. The gearboxes are of copact and hence space-saving construction. Designs 2-stage and 3-stage gearboxes Hollow shaft with keyway or shrink disc Solid shaft with keyway Foot or flange ounting Torque plate, including rubber buffer With MH three-phase AC otors (efficiency classes IE2)power range kw A low noise solution Helical wor gearboxes are particularly low-noise drive coponents. They create a copact drive unit in cobination with our servo otors. The helical wor gearboxes are designed in 2- and 3-stage versions and can reach a torque of up to 1,250 N and a ratio of up to i=1847. Inverters for otor-proxiity installation The Drive Package with decentralised Inverter Drives 8400 otec covers a power range up to 7.5 kw. Helical-bevel geared otor GSS07-2M HBR V00-en_GB-12/

178 GSS helical-wor gearboxes General inforation Functions and features Gearbox type Housing Design Material Solid shaft Design Tolerance Material Hollow shaft Design Tolerance Material Toothed parts Design Material Shaft-hub joint Shaft sealing rings Design Material Bearing Design Lubricants Standard Quantities Mechanical efficiency 1-stage gearboxes [η c=1 ] 2-stage gearboxes [η c=1 ] 3-stage gearboxes [η c=1 ] 4-stage gearboxes [η c=1 ] Notes GSS Cuboid Aluiniu / cast iron with keyway to DIN (d > 50 ) k6 (d 50 ) Tepered steel C45 or CrMo4 H: with keyway S: sooth Bore H7 Tepered steel C45 Optiised tooth flanks and profile geoetry Ground tooth flanks Case-hardened steel, bronze (wor gear only) 1st stage/prestage/helical (bevel) gearbox: Friction-type connection Output stage (= 2nd, 3rd or 4th stage): Friction-type or positive-fit connection With dust lip NB / FP Ball bearing / tapered-roller bearing depending on size and design DIN corresponding to ounting position (see operating instructions) ) ) Dependent on transission ratio Housing at operating teperature and teeth run in 1) 32 - Efficiencies depending on ratio V00-en_GB-12/2013

179 GSS helical-wor gearboxes General inforation Functions and features Lubricants Lenze gearboxes and geared otors are ready for operation on delivery and are filled with lubricants specific to both the drive and the design. The ounting position and design specified in the order are key factors in choosing the volue of lubricant. The lubricants listed in the lubricant table are approved for use in Lenze drives. Lubricant table Mode Abient teperature [ C] Specification Note Changing interval Fuchs Klüber Shell CLP PG 460 CLP HC 220 USDA H Synthetic-based oil (polyglycol) Synthetic-based oil (synthetic hydrocarbon / polyalpha-olefin oil) Cannot be ixed with other oil types. For food processing industry operating hours operating hours not later than after three years (oil teperature not later than after three years (oil teperature C) C) breer & leguil Cassida Fluid GL 220 Klübersynth Klüberoil GH UH1-220 N Shell Tivela S 460 ƒ ƒ Please contact your Lenze office if you are operating at abient teperatures in areas up to < -20 C > or up to +40 C. Caution: when using the lubricant CLP HC 220 with the GSS helical-wor gearbox, the load capacity c is reduced to 80 % of the values stated in the catalogue V00-en_GB-12/

180 GSS helical-wor gearboxes General inforation Functions and features Surface and corrosion protection For optiu protection of geared otors against abient conditions, the surface and corrosion protection syste (OKS) offers tailor-ade solutions. Various surface coatings cobined with other protective easures ensure that the geared otors operate reliably even at high air huidity, in outdoor installations or in the presence of atospheric ipurities. Any colour fro the RAL Classic collection can be chosen for the top coat. The geared otors are also available unpainted (no surface and corrosion protection). Surface and corrosion protection syste OKS-G (pried) OKS-S (sall) OKS-M (ediu) OKS-L (high) Applications Catalogue text Measures Catalogue text 1K priing coat (grey) Zinc-coated screws Dependent on subsequent Rust-free breather eleents top coat applied Optional easures Stainless steel naeplate Surface coating as per corrosivity category C1 (in line with EN Standard applications 2) Internal installation in heated Zinc-coated screws buildings Rust-free breather eleents Air huidity up to 90% Optional easures Stainless steel naeplate Surface coating as per corrosivity category C2 (in line with EN ) Internal installation in nonheated buildings Zinc-coated screws Rust-free breather eleents Covered, protected external Optional easures installation Stainless steel shaft Air huidity up to 95% Stainless steel naeplate Rust-free shrink disc (on request) Surface coating as per corrosivity category C3 (in line with EN ) Blower cover and B end shield additionally pried Cable glands with gaskets Corrosion-resistant brake with cover ring, stainless friction plate, and chroe-plated arature plate (on request) All screws/screw plugs zinc-coated External installation Stainless breather eleents Air huidity above 95% Threaded holes that are not used are closed by eans of plastic plugs Cheical industry plants Optional easures Food industry Sealed recesses on otor (on request) Stainless steel shaft Stainless steel naeplate Rust-free shrink disc (on request) Additional priing coat on cast iron fan Oil expansion tank and torque plates painted separately and supplied loose V00-en_GB-12/2013

181 GSS helical-wor gearboxes General inforation Functions and features Structure of surface coating Surface and corrosion protection syste Corrosivity category DIN EN ISO Surface coating Structure Colour Without OKS (uncoated) OKS-G (pried) OKS-S (sall) OKS-M (ediu) OKS-L (high) C1 C2 C3 Dipping pried gearbox Dipping pried gearbox 1K priing coat Dipping pried gearbox 2K-PUR top coat Dipping pried gearbox 1K priing coat 2K-PUR top coat Dipping pried gearbox 2K-EP priing coat 2K-PUR top coat Standard: RAL 7012 Optional: RAL Classic Standard: RAL 7012 Optional: RAL Classic Standard: RAL 7012 Optional: RAL Classic 6.10 V00-en_GB-12/

182 GSS helical-wor gearboxes General inforation Functions and features Ventilation Gearboxes without ventilation No ventilation is required for gearbox GSS04. Gearboxes with ventilation Gearboxes GSS are supplied with breather eleents as standard V00-en_GB-12/2013

183 GSS helical-wor gearboxes General inforation Diensioning General inforation about the data provided in this catalogue Powers, torques and speeds The powers, torques and speeds specified in this catalogue are rounded values and are valid under the following conditions: Operating tie/day = 8 h (100% OT) Duty class I for up to 10 switching operations/h Mounting positions and designs in this catalogue Standard lubricant T ab = 20 C for gearboxes, T ab = 40 C for otors (in accordance with EN 60034) Site altitude < = 1000 asl The selection tables provide the perissible echanical powers and torques. For notes on the theral power liit, see chapter drive diensioning. The rated power specified for otors and geared otors applies to operating ode S1 (in accordance with EN 60034). Under different operating conditions, the values obtained ay vary fro those listed here. In the case of extree operating conditions, please consult your Lenze sales office V00-en_GB-12/

184 GSS helical-wor gearboxes General inforation Diensioning Theral power liit The theral power liit, defined by the heat balance, liits the perissible gearbox continuous power. It ay be less than the echanical power ratings listed in the selection tables. The theral power liit is affected by: the churning losses in the lubricant. These are deterined by the ounting position and the circuferential speed of the wheels the load and the speed the abient conditions: teperature, air circulation, input or dissipation via shafts and the foundation Please consult your Lenze subsidiary if the following input speeds n 1 are exceeded on a continuous basis (continuous is defined as ore than 8 h/day): Motor frae size Mounting position A, B, E, F 3000 r/in 3000 r/in 2000 r/in Mounting position C, D 3000 r/in 1500 r/in 1500 r/in if the following input speeds n 1 are exceeded: Motor frae size Mounting position A, B, E, F 4000 r/in 4000 r/in 3000 r/in Mounting position C, D 3000 r/in 2000 r/in 1500 r/in Possible ways of extending the application area synthetic lubricant (option) shaft sealing rings ade fro FP aterial/viton (option) reduction in lubricant quantity cooling of the geared otor by eans of air convection on the achine/syste V00-en_GB-12/2013

185 GSS helical-wor gearboxes General inforation Diensioning Load capacity and application factor Load capacity c of gearbox Rated value for the load capacity of Lenze geared otors. c is the ratio of the perissible rated torque of the gearbox to the rated torque supplied by the drive coponent (e.g. the built-in Lenze otor). The value of c ust always be greater than the value of the application factor k calculated for the application. Application factor k (according to DIN 3990) Takes into account the influence of teporally variable loads which are actually present during the anticipated operating tie of gearboxes and geared otors. k is deterined by: the type of load the load intensity teporal influences Duty class I II III Load type Sooth operation, sall or light jolts Uneven operation, average jolts Uneven operation, severe jolts and/or alternating load Application factor k 6.10 V00-en_GB-12/

186 GSS helical-wor gearboxes General inforation Diensioning Torque derating at low otor frequencies Motor size-dependent torque reduction, taking into account the theral response during operation on the inverter. Torque characteristics A = Operation with integral fan and brake B = Operation with integral fan and brake control "Holding current reduction" You can use the Drive Solution Designer for precise drive diensioning. The Drive Solution Designer helps you to carry out a fast and highquality drive diensioning. The software includes well-founded and proven knowledge on drive applications and electro-echanical drive coponents. Please contact your Lenze sales office V00-en_GB-12/2013

187 GSS helical-wor gearboxes General inforation Diensioning Notes on the selection tables The selection tables show the available cobinations of gearbox type, nuber of stages, ratio and otor. The following legend indicates the structure of the selection tables V00-en_GB-12/

188 GSS helical-wor gearboxes General inforation Diensioning Notes on the selection tables Motor voltages The power values and torques indicated in the selection tables relate to the following otor voltages: 50 Hz : Δ 230 V / Y 400 V 60 Hz : Δ 265 V / Y 460 V 87 Hz : Δ 400 V Operation at 87 Hz In 87 Hz operation, the three-phase AC otor (which is designed for a voltage of Δ 230 V / Y 400 V at 50 Hz) is operated on an inverter with 400 V rated voltage in a delta connection. It is iportant to note here that the inverter ust be configured for 87Hz output. This offers the following advantages over 50 Hz operation: the setting range of the otor is increased by a factor of the otor can then provide around 1.73 ties greater output, which in turn allows a saller and ore affordable otor to be selected for the application. the efficiency of the otor is also iproved V00-en_GB-12/2013

189 GSS helical-wor gearboxes General inforation Notes on ordering We want to be sure that you receive the correct products in good tie. To allow us to achieve this we need: your address and your copany data our product key for the individual products in this catalogue your delivery date and delivery address Ordering procedure Please use the ordering inforation checklist to ensure that you provide all the ordering inforation required for the various products. The ordering inforation checklist, the product key, the basic versions, options, ounting position and position of the syste blocks will be found in the General Product key section. A list of Lenze's worldwide sales offices can be found on the Internet: V00-en_GB-12/

190 GSS helical-wor gearboxes General inforation Ordering details checklist V00-en_GB-12/2013

191 GSS helical-wor gearboxes General inforation Ordering details checklist 6.10 V00-en_GB-12/

192 GSS helical-wor gearboxes General inforation Ordering details checklist Three-phase AC otors options V00-en_GB-12/2013

193 GSS helical-wor gearboxes General inforation Ordering details checklist Three-phase AC otors options 6.10 V00-en_GB-12/

194 GSS helical-wor gearboxes General inforation V00-en_GB-12/2013

195 GSS helical-wor gearboxes Technical data Perissible radial and axial forces at output Perissible radial force F rad,per = in(f w x f α x F rad,ax ; f w x F rad,ax at n 2 16 r/in) Perissible axial force F ax,per = F ax,ax if F rad = 0 If F rad and F ax 0; please contact Lenze. Application of forces Effective direction factor f α at output shaft 6.10 Direction of rotation R Direction of rotation L V00-en_GB-12/

196 GSS helical-wor gearboxes Technical data Perissible radial and axial forces at output Additional load factor f w at output shaft Solid shaft (V ) Solid shaft with flange (V K) Hollow shaft (H ) GSS -2/3 H Size Gearbox n 2 [r/in] Max. radial force, Hollow shaft F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax GSS GSS GSS GSS Max. axial force, Hollow shaft F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax GSS GSS GSS GSS ƒ Application of force F rad : at hollow shaft end face (x = 0) ƒ F ax,ax only valid with F rad = 0 ƒ Neither radial nor axial forces are perissible for the hollow shaft with shrink disc (S ) V00-en_GB-12/2013

197 GSS helical-wor gearboxes Technical data Perissible radial and axial forces at output GSS -2/3 V R Size Gearbox n 2 [r/in] Max. radial force, Solid shaft without flange F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax GSS GSS GSS GSS Max. axial force, Solid shaft without flange F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax GSS GSS GSS GSS GSS -2/3 V K Size Gearbox n 2 [r/in] Max. radial force, Solid shaft with flange F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax F rad,ax GSS GSS GSS GSS Max. axial force, Solid shaft with flange F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax F ax,ax GSS GSS GSS GSS ƒ Application of force F rad : centre of shaft journal (x = l/2) ƒ F ax,ax only valid with F rad = V00-en_GB-12/

198 GSS helical-wor gearboxes Technical data Moents of inertia GSS -2 ƒ Moent of inertia (J) depending on ratio i Gearbox GSS04 Gearbox GSS ƒ ƒ The oents of inertia relate to the drive shaft of the gearbox. The total oent of inertia is calculated by adding the values of the gearbox, otor and accessories V00-en_GB-12/2013

199 GSS helical-wor gearboxes Technical data Moents of inertia GSS -2 ƒ Moent of inertia (J) depending on ratio i Gearbox GSS06 Gearbox GSS ƒ ƒ The oents of inertia relate to the drive shaft of the gearbox. The total oent of inertia is calculated by adding the values of the gearbox, otor and accessories V00-en_GB-12/

200 GSS helical-wor gearboxes Technical data Moents of inertia GSS -3 ƒ Moent of inertia (J) depending on ratio i Gearbox GSS05 Gearbox GSS ƒ ƒ The oents of inertia relate to the drive shaft of the gearbox. The total oent of inertia is calculated by adding the values of the gearbox, otor and accessories V00-en_GB-12/2013

201 GSS helical-wor gearboxes Technical data Moents of inertia GSS -3 ƒ Moent of inertia (J) depending on ratio i Gearbox J J J J J J J J J J J J J J J J J J J J J J J J [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] [kgc²] GSS ƒ ƒ The oents of inertia relate to the drive shaft of the gearbox. The total oent of inertia is calculated by adding the values of the gearbox, otor and accessories V00-en_GB-12/

202 GSS helical-wor gearboxes Technical data Efficiencies ƒ During start-up, the start-up efficiency η a of a helical-wor gearbox is lower than its operative efficiency at rated speed. The start-up efficiency η a ust therefore always be considered when starting under load. GSS04-2 n 2 [r/in] η a 0.71 η c= η a 0.71 η c= η a 0.67 η c= η a 0.71 η c= η a 0.71 η c= η a 0.67 η c= η a 0.71 η c= η a 0.67 η c= η a 0.67 η c= η a 0.55 η c= η a 0.67 η c= η a 0.56 η c= η a 0.67 η c= η a 0.56 η c= η a 0.67 η c= η a 0.55 η c= η a 0.67 η c= η a 0.55 η c= η a 0.56 η c= η a 0.55 η c= η a 0.56 η c= η a 0.55 η c= η a 0.56 η c= η a 0.55 η c= η a 0.56 η c= η a 0.55 η c= η a 0.56 η c= η a 0.55 η c= η a 0.56 η c= η a 0.55 η c= V00-en_GB-12/2013

203 GSS helical-wor gearboxes Technical data Efficiencies ƒ During start-up, the start-up efficiency η a of a helical-wor gearbox is lower than its operative efficiency at rated speed. The start-up efficiency η a ust therefore always be considered when starting under load. GSS05-2 n 2 [r/in] η a 0.71 η c= η a 0.71 η c= η a 0.67 η c= η a 0.71 η c= η a 0.71 η c= η a 0.67 η c= η a 0.71 η c= η a 0.67 η c= η a 0.67 η c= η a 0.55 η c= η a 0.67 η c= η a 0.57 η c= η a 0.67 η c= η a 0.57 η c= η a 0.67 η c= η a 0.55 η c= η a 0.67 η c= η a 0.55 η c= η a 0.57 η c= η a 0.55 η c= η a 0.57 η c= η a 0.55 η c= η a 0.57 η c= η a 0.55 η c= η a 0.57 η c= η a 0.55 η c= η a 0.57 η c= η a 0.55 η c= η a 0.57 η c= η a 0.55 η c= V00-en_GB-12/

204 GSS helical-wor gearboxes Technical data Efficiencies ƒ During start-up, the start-up efficiency η a of a helical-wor gearbox is lower than its operative efficiency at rated speed. The start-up efficiency η a ust therefore always be considered when starting under load. GSS05-3 n 2 [r/in] η a 0.67 η c= η a 0.67 η c= η a 0.67 η c= η a 0.55 η c= η a 0.57 η c= η a 0.55 η c= η a 0.57 η c= η a 0.55 η c= η a 0.57 η c= η a 0.55 η c= η a 0.57 η c= η a 0.55 η c= η a 0.57 η c= η a 0.55 η c= V00-en_GB-12/2013

205 GSS helical-wor gearboxes Technical data Efficiencies ƒ During start-up, the start-up efficiency η a of a helical-wor gearbox is lower than its operative efficiency at rated speed. The start-up efficiency η a ust therefore always be considered when starting under load. GSS06-2 n 2 [r/in] η a 0.72 η c= η a 0.72 η c= η a 0.67 η c= η a 0.72 η c= η a 0.72 η c= η a 0.67 η c= η a 0.72 η c= η a 0.67 η c= η a 0.67 η c= η a 0.57 η c= η a 0.67 η c= η a 0.57 η c= η a 0.67 η c= η a 0.57 η c= η a 0.67 η c= η a 0.57 η c= η a 0.67 η c= η a 0.57 η c= η a 0.57 η c= η a 0.57 η c= η a 0.57 η c= η a 0.57 η c= η a 0.57 η c= η a 0.57 η c= η a 0.57 η c= η a 0.57 η c= η a 0.57 η c= η a 0.57 η c= η a 0.57 η c= η a 0.57 η c= V00-en_GB-12/

206 GSS helical-wor gearboxes Technical data Efficiencies ƒ During start-up, the start-up efficiency η a of a helical-wor gearbox is lower than its operative efficiency at rated speed. The start-up efficiency η a ust therefore always be considered when starting under load. GSS06-3 n 2 [r/in] η a 0.57 η c= η a 0.57 η c= η a 0.57 η c= η a 0.57 η c= η a 0.57 η c= η a 0.57 η c= η a 0.57 η c= η a 0.57 η c= η a 0.57 η c= η a 0.57 η c= η a 0.57 η c= η a 0.57 η c= η a 0.57 η c= η a 0.57 η c= η a 0.57 η c= η a 0.57 η c= η a 0.57 η c= η a 0.57 η c= η a 0.57 η c= η a 0.57 η c= η a 0.57 η c= η a 0.57 η c= η a 0.57 η c= η a 0.57 η c= V00-en_GB-12/2013

207 GSS helical-wor gearboxes Technical data Efficiencies ƒ During start-up, the start-up efficiency η a of a helical-wor gearbox is lower than its operative efficiency at rated speed. The start-up efficiency η a ust therefore always be considered when starting under load. GSS07-2 n 2 [r/in] η a 0. η c= η a 0. η c= η a 0.69 η c= η a 0. η c= η a 0. η c= η a 0.69 η c= η a 0. η c= η a 0.69 η c= η a 0.69 η c= η a 0.60 η c= η a 0.69 η c= η a 0.60 η c= η a 0.69 η c= η a 0.60 η c= η a 0.69 η c= η a 0.60 η c= η a 0.69 η c= η a 0.60 η c= η a 0.60 η c= η a 0.60 η c= η a 0.60 η c= η a 0.60 η c= η a 0.60 η c= η a 0.60 η c= η a 0.60 η c= η a 0.60 η c= η a 0.60 η c= η a 0.60 η c= η a 0.60 η c= η a 0.60 η c= V00-en_GB-12/

208 GSS helical-wor gearboxes Technical data Efficiencies ƒ During start-up, the start-up efficiency η a of a helical-wor gearbox is lower than its operative efficiency at rated speed. The start-up efficiency η a ust therefore always be considered when starting under load. GSS07-3 n 2 [r/in] η a 0.60 η c= η a 0.60 η c= η a 0.60 η c= η a 0.60 η c= η a 0.60 η c= η a 0.60 η c= η a 0.60 η c= η a 0.60 η c= η a 0.60 η c= η a 0.60 η c= η a 0.60 η c= η a 0.60 η c= η a 0.60 η c= η a 0.60 η c= η a 0.60 η c= η a 0.60 η c= η a 0.60 η c= η a 0.60 η c= η a 0.60 η c= η a 0.60 η c= η a 0.60 η c= η a 0.60 η c= η a 0.60 η c= η a 0.60 η c= V00-en_GB-12/2013

209 GSS helical-wor gearboxes Technical data Weights GSS -2M HAR / HBR GSS04 GSS05 GSS06 GSS07 080C C C C C C C C C C GSS -2M HAK GSS04 GSS05 GSS06 GSS07 080C C C C C C C C C C ƒ Weights with oil filling for ounting position A; all values are approxiate. The weights relate to the basic version. Bear in ind that additional weights ay be needed, e.g. for otor options V00-en_GB-12/

210 GSS helical-wor gearboxes Technical data Weights GSS -2M VAR / VBR GSS04 GSS05 GSS06 GSS07 080C C C C C C C C C C GSS -2M VAK GSS04 GSS05 GSS06 GSS07 080C C C C C C C C C C ƒ Weights with oil filling for ounting position A; all values are approxiate. The weights relate to the basic version. Bear in ind that additional weights ay be needed, e.g. for otor options V00-en_GB-12/2013

211 GSS helical-wor gearboxes Technical data Weights GSS -2M SAR / SBR GSS04 GSS05 GSS06 GSS07 080C C C C C C C C C C GSS -2M SAK GSS04 GSS05 GSS06 GSS07 080C C C C C C C C C C ƒ Weights with oil filling for ounting position A; all values are approxiate. The weights relate to the basic version. Bear in ind that additional weights ay be needed, e.g. for otor options V00-en_GB-12/

212 GSS helical-wor gearboxes Technical data Weights GSS -3M HAR / HBR GSS06 GSS07 080C C C C12 91 GSS -3M HAK GSS06 GSS07 080C C C C GSS -3M VAR / VBR GSS06 GSS07 080C C C C12 96 GSS -3M VAK GSS06 GSS07 080C C C C GSS -3M SAR / SBR GSS06 GSS07 080C C C C12 93 GSS -3M SAK GSS06 GSS07 080C C C C ƒ Weights with oil filling for ounting position A; all values are approxiate. The weights relate to the basic version. Bear in ind that additional weights ay be needed, e.g. for otor options V00-en_GB-12/2013

213 GSS helical-wor gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 0.75 kw nn 1410 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GSS04-2M 080C GSS04-2M 080C GSS04-2M 080C GSS04-2M 080C GSS04-2M 080C GSS04-2M 080C GSS04-2M 080C GSS04-2M 080C GSS04-2M 080C GSS04-2M 080C GSS05-2M 080C GSS04-2M 080C GSS04-2M 080C GSS04-2M 080C GSS05-2M 080C GSS04-2M 080C GSS05-2M 080C GSS04-2M 080C GSS05-2M 080C GSS04-2M 080C GSS05-2M 080C GSS04-2M 080C GSS05-2M 080C GSS06-2M 080C GSS04-2M 080C GSS05-2M 080C GSS04-2M 080C GSS05-2M 080C GSS05-2M 080C GSS05-2M 080C GSS06-2M 080C GSS05-2M 080C GSS06-2M 080C GSS05-2M 080C GSS06-2M 080C GSS05-2M 080C GSS06-2M 080C GSS06-2M 080C GSS07-2M 080C GSS06-3M 080C32 66 V00-en_GB-12/

214 GSS helical-wor gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 0.75 kw nn 1410 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GSS07-3M 080C GSS06-2M 080C GSS07-2M 080C GSS06-2M 080C GSS07-2M 080C GSS06-3M 080C GSS07-3M 080C GSS06-3M 080C GSS07-3M 080C GSS06-2M 080C GSS07-2M 080C GSS06-2M 080C GSS07-2M 080C GSS06-3M 080C GSS07-3M 080C GSS06-3M 080C GSS06-2M 080C GSS07-2M 080C GSS07-3M 080C GSS06-3M 080C GSS07-3M 080C GSS06-3M 080C GSS07-3M 080C GSS07-3M 080C GSS07-3M 080C GSS07-3M 080C GSS07-3M 080C V00-en_GB-12/2013

215 GSS helical-wor gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = kw nn 1430 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GSS04-2M 090C GSS04-2M 090C GSS04-2M 090C GSS04-2M 090C GSS04-2M 090C GSS04-2M 090C GSS04-2M 090C GSS05-2M 090C GSS04-2M 090C GSS05-2M 090C GSS04-2M 090C GSS05-2M 090C GSS04-2M 090C GSS05-2M 090C GSS04-2M 090C GSS05-2M 090C GSS04-2M 090C GSS05-2M 090C GSS04-2M 090C GSS05-2M 090C GSS04-2M 090C GSS05-2M 090C GSS06-2M 090C GSS05-2M 090C GSS06-2M 090C GSS04-2M 090C GSS05-2M 090C GSS06-2M 090C GSS05-2M 090C GSS06-2M 090C GSS05-2M 090C GSS06-2M 090C GSS05-2M 090C GSS06-2M 090C GSS05-2M 090C GSS06-2M 090C GSS05-2M 090C GSS06-2M 090C GSS07-2M 090C GSS06-2M 090C12 V00-en_GB-12/

216 GSS helical-wor gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = kw nn 1430 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GSS07-2M 090C GSS07-2M 090C GSS06-2M 090C GSS07-2M 090C GSS06-2M 090C GSS06-2M 090C GSS07-2M 090C GSS06-3M 090C GSS07-3M 090C GSS06-2M 090C GSS07-2M 090C GSS06-2M 090C GSS07-2M 090C GSS06-3M 090C GSS07-3M 090C GSS06-3M 090C GSS07-3M 090C GSS06-2M 090C GSS07-2M 090C GSS07-2M 090C GSS07-3M 090C GSS07-2M 090C GSS07-3M 090C GSS07-3M 090C GSS07-3M 090C GSS07-3M 090C V00-en_GB-12/2013

217 GSS helical-wor gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 1.5 kw nn 1435 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GSS04-2M 090C GSS04-2M 090C GSS04-2M 090C GSS05-2M 090C GSS04-2M 090C GSS05-2M 090C GSS04-2M 090C GSS05-2M 090C GSS04-2M 090C GSS05-2M 090C GSS04-2M 090C GSS05-2M 090C GSS04-2M 090C GSS05-2M 090C GSS04-2M 090C GSS05-2M 090C GSS04-2M 090C GSS05-2M 090C GSS04-2M 090C GSS05-2M 090C GSS04-2M 090C GSS05-2M 090C GSS05-2M 090C GSS06-2M 090C GSS05-2M 090C GSS06-2M 090C GSS05-2M 090C GSS06-2M 090C GSS05-2M 090C GSS06-2M 090C GSS07-2M 090C GSS05-2M 090C GSS06-2M 090C GSS05-2M 090C GSS06-2M 090C GSS07-2M 090C GSS05-2M 090C GSS06-2M 090C GSS06-2M 090C GSS06-2M 090C32 V00-en_GB-12/

218 GSS helical-wor gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 1.5 kw nn 1435 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GSS07-2M 090C GSS06-2M 090C GSS07-2M 090C GSS07-2M 090C GSS06-2M 090C GSS07-2M 090C GSS06-2M 090C GSS06-2M 090C GSS07-2M 090C GSS07-3M 090C GSS07-2M 090C GSS07-2M 090C GSS07-3M 090C GSS07-3M 090C GSS07-2M 090C GSS07-2M 090C GSS07-3M 090C GSS07-2M 090C GSS07-3M 090C V00-en_GB-12/2013

219 GSS helical-wor gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 2.2 kw nn 1445 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GSS05-2M 100C GSS05-2M 100C GSS05-2M 100C GSS05-2M 100C GSS05-2M 100C GSS05-2M 100C GSS06-2M 100C GSS05-2M 100C GSS06-2M 100C GSS05-2M 100C GSS06-2M 100C GSS05-2M 100C GSS06-2M 100C GSS05-2M 100C GSS06-2M 100C GSS05-2M 100C GSS06-2M 100C GSS05-2M 100C GSS06-2M 100C GSS05-2M 100C GSS06-2M 100C GSS07-2M 100C GSS05-2M 100C GSS06-2M 100C GSS06-2M 100C GSS07-2M 100C GSS06-2M 100C GSS07-2M 100C GSS07-2M 100C GSS06-2M 100C GSS06-2M 100C GSS07-2M 100C GSS06-2M 100C GSS07-2M 100C GSS06-2M 100C GSS07-2M 100C GSS06-2M 100C GSS07-2M 100C GSS07-2M 100C GSS07-2M 100C12 V00-en_GB-12/

220 GSS helical-wor gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 2.2 kw nn 1445 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GSS07-2M 100C GSS07-2M 100C GSS07-3M 100C GSS07-2M 100C V00-en_GB-12/2013

221 GSS helical-wor gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 3.0 kw nn 1445 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GSS05-2M 100C GSS05-2M 100C GSS05-2M 100C GSS06-2M 100C GSS05-2M 100C GSS06-2M 100C GSS05-2M 100C GSS06-2M 100C GSS05-2M 100C GSS06-2M 100C GSS05-2M 100C GSS06-2M 100C GSS05-2M 100C GSS06-2M 100C GSS05-2M 100C GSS06-2M 100C GSS06-2M 100C GSS05-2M 100C GSS06-2M 100C GSS07-2M 100C GSS06-2M 100C GSS06-2M 100C GSS07-2M 100C GSS07-2M 100C GSS06-2M 100C GSS06-2M 100C GSS07-2M 100C GSS06-2M 100C GSS07-2M 100C GSS07-2M 100C GSS06-2M 100C GSS06-2M 100C GSS07-2M 100C GSS06-2M 100C GSS07-2M 100C GSS07-2M 100C GSS07-2M 100C GSS07-2M 100C GSS07-2M 100C32 V00-en_GB-12/

222 GSS helical-wor gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 4.0 kw nn 1455 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GSS06-2M 112C GSS06-2M 112C GSS06-2M 112C GSS07-2M 112C GSS06-2M 112C GSS06-2M 112C GSS07-2M 112C GSS06-2M 112C GSS07-2M 112C GSS06-2M 112C GSS07-2M 112C GSS07-2M 112C GSS06-2M 112C GSS06-2M 112C GSS07-2M 112C GSS06-2M 112C GSS07-2M 112C GSS06-2M 112C GSS07-2M 112C GSS06-2M 112C GSS07-2M 112C GSS06-2M 112C GSS07-2M 112C GSS07-2M 112C GSS06-2M 112C GSS07-2M 112C GSS07-2M 112C GSS07-2M 112C GSS07-2M 112C GSS07-2M 112C GSS07-2M 112C GSS07-2M 112C V00-en_GB-12/2013

223 GSS helical-wor gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 5.5 kw nn 1470 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GSS06-2M 132C GSS07-2M 132C GSS06-2M 132C GSS07-2M 132C GSS06-2M 132C GSS07-2M 132C GSS07-2M 132C GSS06-2M 132C GSS06-2M 132C GSS07-2M 132C GSS06-2M 132C GSS07-2M 132C GSS06-2M 132C GSS07-2M 132C GSS07-2M 132C GSS06-2M 132C GSS06-2M 132C GSS07-2M 132C GSS06-2M 132C GSS07-2M 132C GSS06-2M 132C GSS07-2M 132C GSS07-2M 132C GSS06-2M 132C GSS07-2M 132C GSS07-2M 132C GSS07-2M 132C GSS07-2M 132C GSS07-2M 132C V00-en_GB-12/

224 GSS helical-wor gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 7.5 kw nn 1460 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GSS06-2M 132C GSS07-2M 132C GSS06-2M 132C GSS07-2M 132C GSS06-2M 132C GSS07-2M 132C GSS07-2M 132C GSS06-2M 132C GSS06-2M 132C GSS07-2M 132C GSS06-2M 132C GSS07-2M 132C GSS06-2M 132C GSS07-2M 132C GSS07-2M 132C GSS06-2M 132C GSS06-2M 132C GSS07-2M 132C GSS07-2M 132C GSS07-2M 132C GSS07-2M 132C GSS07-2M 132C GSS07-2M 132C GSS07-2M 132C V00-en_GB-12/2013

225 GSS helical-wor gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 1 kw nn 1470 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GSS07-2M 160C GSS07-2M 160C GSS07-2M 160C GSS07-2M 160C GSS07-2M 160C GSS07-2M 160C GSS07-2M 160C GSS07-2M 160C V00-en_GB-12/

226 GSS helical-wor gearboxes Technical data Selection tables 50 Hz, 60 Hz: PN = 15.0 kw nn 1470 r/in fn 50 Hz n2 [r/in] M2 [N] r/in 60 Hz i c n2 [r/in] M2 [N] c GSS07-2M 160C GSS07-2M 160C GSS07-2M 160C GSS07-2M 160C V00-en_GB-12/2013

227 GSS helical-wor gearboxes Technical data 6.10 V00-en_GB-12/

228 GSS helical-wor gearboxes Technical data Diensions GSS -2M H R k 080C32 090C12 090C32 100C12 g g 1 MHEMAXX MHEMABR MHEMAXX k MHEMABR Δ k MHFMAXX MHFMABR GSS04 0 k 479 GSS GSS GSS V00-en_GB-12/2013

229 GSS helical-wor gearboxes Technical data k 100C32 112C22 132C12 160C22 132C22 g g 1 MHEMAXX MHEMABR MHEMAXX k MHEMABR Δ k MHFMAXX MHFMABR k GSS GSS GSS C a h 1) h 1 o p 1) GSS GSS GSS GSS d d 1 l 1) l 1 u t i 1 a 1 b 1 e 1 f 1 s 1 GSS04 GSS05 GSS06 GSS07 H JS , H M6x12 M8x15 M10x16 M12x18 a 5 a 6 b 5 b 6 b 7 c 5 e 5 f 5 f 6 n s 5 GSS GSS GSS GSS ) k 2! 6.10 V00-en_GB-12/

230 GSS helical-wor gearboxes Technical data Diensions GSS -2M HAK k 080C32 090C12 090C32 100C12 g g 1 MHEMAXX MHEMABR MHEMAXX k MHEMABR Δ k MHFMAXX MHFMABR GSS04 0 k 479 GSS GSS GSS V00-en_GB-12/2013

231 GSS helical-wor gearboxes Technical data k 100C32 112C22 132C12 160C22 132C22 g g 1 MHEMAXX MHEMABR MHEMAXX k MHEMABR Δ k MHFMAXX MHFMABR k GSS GSS GSS C a h 1) h 1 k 8 o p 1) q GSS GSS GSS GSS d d 1 l l 1 u t i 2 o 1 1) a 2 b 2 c 2 e 2 f 2 s 2 GSS04 GSS05 GSS06 GSS07 H JS , j x 9 4 x 11 4 x 11 4 x 14 4 x 14 4 x 14 1) k 2! 6.10 V00-en_GB-12/

232 GSS helical-wor gearboxes Technical data Diensions GSS -2M V R k 080C32 090C12 090C32 100C12 g g 1 MHEMAXX MHEMABR MHEMAXX k MHEMABR Δ k MHFMAXX MHFMABR GSS04 0 k 479 GSS GSS GSS V00-en_GB-12/2013

233 GSS helical-wor gearboxes Technical data k 100C32 112C22 132C12 160C22 132C22 g g 1 MHEMAXX MHEMABR MHEMAXX k MHEMABR Δ k MHFMAXX MHFMABR k GSS GSS GSS C a h 1) h 1 o p 1) q GSS GSS GSS GSS d d 1 d 2 l l 1 l 2 u t i 1 o 1 1) a 1 b 1 e 1 f 1 s 1 k6 H7 GSS M M6x12 GSS M M8x15 GSS M M10x16 GSS M M12x18 a 5 a 6 b 5 b 6 b 7 c 5 e 5 f 5 f 6 n s 5 GSS GSS GSS GSS ) k 2! 6.10 V00-en_GB-12/

234 GSS helical-wor gearboxes Technical data Diensions GSS -2M VAK k 080C32 090C12 090C32 100C12 g g 1 MHEMAXX MHEMABR MHEMAXX k MHEMABR Δ k MHFMAXX MHFMABR GSS04 0 k 479 GSS GSS GSS V00-en_GB-12/2013

235 GSS helical-wor gearboxes Technical data k 100C32 112C22 132C12 160C22 132C22 g g 1 MHEMAXX MHEMABR MHEMAXX k MHEMABR Δ k MHFMAXX MHFMABR k GSS GSS GSS C a h 1) h 1 k 8 o p 1) q GSS GSS GSS GSS d d 2 l l 1 l 2 u t i 2 o 1 1) a 2 b 2 c 2 e 2 f 2 s 2 k6 j7 GSS04 25 M x 9 GSS05 30 M x 11 GSS06 GSS M16 M x 14 4 x 14 4 x 14 1) k 2! 6.10 V00-en_GB-12/

236 GSS helical-wor gearboxes Technical data Diensions GSS -3M H R V00-en_GB-12/2013

237 GSS helical-wor gearboxes Technical data k 080C32 090C12 090C32 100C12 g g 1 MHEMAXX MHEMABR MHEMAXX k MHEMABR Δ k MHFMAXX MHFMABR k GSS GSS a h h 1 o p GSS GSS d d 1 l l 1 u t i 1 a 1 b 1 e 1 f 1 s 1 GSS06 GSS07 H JS , H M10x16 M12x18 a 5 a 6 b 5 b 6 b 7 c 5 e 5 f 5 f 6 n s 5 GSS GSS V00-en_GB-12/

238 GSS helical-wor gearboxes Technical data Diensions GSS -3M HAK V00-en_GB-12/2013

239 GSS helical-wor gearboxes Technical data k 080C32 090C12 090C32 100C12 g g 1 MHEMAXX MHEMABR MHEMAXX k MHEMABR Δ k MHFMAXX MHFMABR k GSS GSS a h h 1 k 8 o p q GSS GSS d d 1 l l 1 u t i 2 o 1 a 2 b 2 c 2 e 2 f 2 s 2 GSS06 GSS07 H JS , j x 11 4 x 14 4 x 14 4 x V00-en_GB-12/

240 GSS helical-wor gearboxes Technical data Diensions GSS -3M V R V00-en_GB-12/2013

241 GSS helical-wor gearboxes Technical data k 080C32 090C12 090C32 100C12 g g 1 MHEMAXX MHEMABR MHEMAXX k MHEMABR Δ k MHFMAXX MHFMABR k GSS GSS a h h 1 o p q GSS GSS d d 1 d 2 l l 1 l 2 u t i 1 o 1 a 1 b 1 e 1 f 1 s 1 k6 H7 GSS M M10x16 GSS M M12x18 a 5 a 6 b 5 b 6 b 7 c 5 e 5 f 5 f 6 n s 5 GSS GSS V00-en_GB-12/

242 GSS helical-wor gearboxes Technical data Diensions GSS -3M VAK V00-en_GB-12/2013

243 GSS helical-wor gearboxes Technical data k 080C32 090C12 090C32 100C12 g g 1 MHEMAXX MHEMABR MHEMAXX k MHEMABR Δ k MHFMAXX MHFMABR k GSS GSS a h h 1 k 8 o p q GSS GSS d d 2 l l 1 l 2 u t i 2 o 1 a 2 b 2 c 2 e 2 f 2 s 2 k6 j7 GSS06 GSS M16 M x 14 4 x 14 4 x V00-en_GB-12/

244 GSS helical-wor gearboxes Technical data V00-en_GB-12/2013

245 GSS helical-wor gearboxes Accessories Hollow shaft with shrink disc d h6 g 2 g 3 g 4 i 1 k 9 k 10 k 11 l l 1 l 4 GSS04 GSS GSS06 GSS ƒ ƒ Output flange and hollow shaft with shrink disc (output version SAK) are not possible in the sae location. For additional diensions see output version H. Ensure that the strength of the achine shaft aterial is adequate in shrink disc designs. When using typical steels, e.g. C45, CrMo4, the torques listed in the selection tables can be used without restriction. Please consult us if you wish to use aterial that is considerably weaker. Mediu surface roughness Rz ust not exceed 15 µ (turning is sufficient) V00-en_GB-12/

246 GSS helical-wor gearboxes Accessories Mounting set for hollow shaft circlip: Proposed design for auxiliary tools d l 1 d 2 l 9 c 7 c 8 c 9 l 8, ax H7 GSS04 GSS M10 M GSS M GSS M V00-en_GB-12/2013

247 GSS helical-wor gearboxes Accessories Hoseproof hollow shaft cover ƒ Cover including gasket GSS04 GSS05 GSS06 GSS07 k 11 [] Gearboxes with 2nd output shaft end GSS04 d k6 25 l 50 i o GSS GSS GSS V00-en_GB-12/

248 GSS helical-wor gearboxes Accessories Torque plate on threaded pitch circle In position 3 In position GSS04 GSS05 GSS06 GSS07 a 4 a 7 a 8 a 9 b 4 d D k V00-en_GB-12/2013

249 GSS helical-wor gearboxes Accessories Torque plate at housing foot In position 2, 4 or 6 GSS04 GSS05 GSS06 GSS07 a 4 a 7 a 8 a 9 b 8 c d D e 5 k V00-en_GB-12/

250 GSS helical-wor gearboxes Accessories Ventilations Position of ventilation, sealing eleents and oil level check GSS A... F Mounting position Ite 1 standard Ventilation / Oil filler plug Ite 2 only with: Oil drain plug GSS05-2M 090C Oil control plug GSS05-2M 100C * On both sides GSS06-2M 112C ** On opposite side GSS07-2M 160C V00-en_GB-12/2013

251 GSS helical-wor gearboxes Accessories Ventilations Position of ventilation, sealing eleents and oil level check GSS A... F Mounting position Ventilation / Oil filler plug Oil drain plug Oil control plug * On both sides ** On opposite side Ite 1 standard Ite 2 only on: GSS07-3M 090C GSS07-3M 100C 6.10 V00-en_GB-12/

252 GSS helical-wor gearboxes Accessories V00-en_GB-12/2013

253 GSS helical-wor gearboxes Accessories 6.10 V00-en_GB-12/

254 GSS helical-wor gearboxes Accessories V00-en_GB-12/2013

255 Motors MH three-phase AC otors 0.75 to 45 kw

256

257 MH three-phase AC otors Contents General inforation Technical data Accessories List of abbreviations Product key Product inforation Functions and features Motor inverter assignent Diensioning Standards and operating conditions Rated data for 50 Hz Rated data for 60 Hz Rated data for 87 Hz Diensions, self-ventilated (4-pole) Diensions, forced ventilated (4-pole) Diensions, 8400 otec inverter Spring-applied brake Resolver Increental encoder and SinCos absolute value encoder Blowers Teperature onitoring Terinal box Plug connectors ICN connector M12 connector HAN connector Handwheel Centrifugal ass 2nd shaft end Protection cover

258 MH three-phase AC otors General inforation List of abbreviations η 100 % η 75 % η 50 % cos ϕ I N I ax J M a M b M ax M N n N P N P ax [%] [%] [%] [A] [A] [kgc²] [N] [N] [N] [N] [r/in] [kw] [kw] Efficiency Efficiency Efficiency Power factor Rated current Max. current consuption Moent of inertia Mass Starting torque Stalling torque Max. torque Rated torque Rated speed Rated power Max. power input U ax U in U N, Δ U N, Y [V] [V] [V] [V] Max. ains voltage Min. ains voltage Rated voltage Rated voltage CE CSA DIN EMC EN IEC IM IP NEMA UL UR VDE CCC GOST curus UkrSEPRO Counauté Européenne Canadian Standards Association Deutsches Institut für Norung e.v. Electroagnetic copatibility European standard International Electrotechnical Coission International Mounting Code International Protection Code National Electrical Manufacturers Association Underwriters Laboratory Listed Product Underwriters Laboratory Recognized Product Verband deutscher Elektrotechniker (Association of Geran Electrical Engineers) China Copulsory Certificate Certificate for Russian Federation Cobined certification arks of UL for the USA and Canada Certificate for Ukraine V01-en_GB-02/2014

259 MH three-phase AC otors General inforation Product key 6.11 V01-en_GB-02/

260 MH three-phase AC otors General inforation Product inforation Special otors have been designed for direct attachent to Lenze gearboxes. These otors are attached to the gearbox without the use of a clutch. Torque transission between the toothing and the otor shaft is friction-locked via a tapered connection here. This otor design eans that the geared otors only require a sall installation space. L-force MH three-phase AC otors are available in a power range fro 0.75 to 45 kw and coply with efficiency class IE2 (high efficiency) as per IEC Since alost all IE2 otors are designed with the sae diensions as the standard efficiency otors, it is easy to switch between the two. The energy efficiency of the L-force MH three-phase AC otors has been approved by Underwriters Laboratories (UL) as an independent third-party. Basic versions The theral sensors integrated as standard allow for peranent teperature onitoring and are coordinated to the otor winding's teperature class F (155 C). The otors of the basic version are adapted to abient conditions by enclosure IP55. In tough operating conditions, the surface and corrosion protection syste is provided to reliably protect the otor fro corrosive edia. Options Various brake sizes each available with several braking torques can be cobined with the three-phase AC otors. The LongLife version of the brake can easily reach 10 x 10 6 switching cycles. A resolver and various increental and absolute value encoders can be fitted for speed and position detection. For fast coissioning, the otors are also available with connectors for the power connection, brake, blower and feedback. Instead of an integral fan, the otor can optionally be equipped with a blower. No torque reduction is then necessary, even at speeds below 20 Hz. For drive tasks in decentralised applications, the otor can be ordered with the otec inverter connected to the terinal box. The otors are available with curus, GOST-R, CCC and UkrSepro approval. Sooth start/braking is possible by increasing the otor's centrifugal ass with a cast iron fan. The otor can be equipped with a handwheel for anual setup or eergency operations. To protect the fan fro falling objects, the fan cover can be equipped with a protection cover. A 2nd shaft end is available for further odifications V01-en_GB-02/2014

261 MH three-phase AC otors General inforation Functions and features Size Motor Spring-applied brake Design Feedback Design Theral sensor Theral contact Theral detector PTC theristor Motor connection Power connection Brake connection Blower connection Feedback connection Teperature sensor connection Shaft bearings Position of the locating bearing Bearing type Colour Further options Standard or LongLife design Reduced, standard or increased braking torque With rectifier With anual release lever Low noise Resolver Increental encoder Absolute value encoder (ulti-turn) TKO KTY KTY PTC Terinal box ICN connector HAN10E connector HAN odular connector Terinal box ICN connector HAN odular connector HAN10E connector Terinal box ICN connector Terinal box ICN connector Terinal box TKO or PTC at connector in the power connection KTY at connector in the feedback connection Standard otors (B3, B5, B14): side B Motors for gearbox direct ounting: side A Deep-groove ball bearing with high-teperature resistant grease, 2 sealing discs or cover plates Not coated Pried Paint in various corrosion-protection designs in accordance with RAL colours Protection cover Increased centrifugal ass Handwheel 2nd shaft end V01-en_GB-02/

262 MH three-phase AC otors General inforation Functions and features Size Motor Spring-applied brake Design Feedback Design Theral sensor Theral contact Theral detector PTC theristor Motor connection Power connection Brake connection Blower connection Feedback connection Teperature sensor connection Shaft bearings Position of the locating bearing Bearing type Colour Further options 112 Terinal box ICN connector HAN10E connector HAN odular connector Terinal box ICN connector HAN odular connector HAN10E connector 132 Standard design Reduced, standard or increased braking torque With rectifier With anual release lever Low noise Resolver Increental encoder Absolute value encoder (ulti-turn) TKO KTY KTY PTC Terinal box ICN connector HAN odular connector Terinal box ICN connector HAN odular connector Terinal box ICN connector Terinal box ICN connector Terinal box TKO or PTC at connector in the power connection KTY at connector in the feedback connection Standard otors (B3, B5, B14): side B Motors for gearbox direct ounting: side A 160 Terinal box HAN odular connector Terinal box HAN odular connector Deep-groove ball bearing with high-teperature resistant grease, 2 sealing discs or cover plates Not coated Pried Paint in various corrosion-protection designs in accordance with RAL colours Protection cover Increased centrifugal ass Handwheel 2nd shaft end Protection cover V01-en_GB-02/2014

263 MH three-phase AC otors General inforation Functions and features Size Motor Spring-applied brake Design Feedback Design Theral sensor Theral contact Theral detector PTC theristor Motor connection Power connection Brake connection Blower connection Feedback connection Teperature sensor connection Shaft bearings Position of the locating bearing Bearing type Colour Further options Standard design Reduced, standard or increased braking torque With rectifier With anual release lever Low noise Resolver Increental encoder Absolute value encoder (ulti-turn) TKO KTY KTY PTC Terinal box Terinal box Terinal box ICN connector Terinal box ICN connector Terinal box Standard otors (B3, B5, B14): side B Motors for gearbox direct ounting: side A 225 Drive end Deep-groove ball bearing with high-teperature resistant grease, 2 sealing discs or cover plates Not coated Pried Paint in various corrosion-protection designs in accordance with RAL colours 6.11 V01-en_GB-02/

264 MH three-phase AC otors General inforation Functions and features Surface and corrosion protection For optiu protection of three-phase AC otors against abient conditions, the surface and corrosion protection syste (OKS) offers tailor-ade solutions. Various surface coatings ensure that the otors operate reliably even at high air huidity, in outdoor installation or in the presence of atospheric ipurities. Any colour fro the RAL Classic collection can be chosen for the top coat. The three-phase AC otors are also available unpainted (no surface and corrosion protection). Surface and corrosion protection syste OKS-G (pried) OKS-S (sall) OKS-M (ediu) OKS-L (high) Applications Measures Dependent on subsequent top coat applied 2K PUR priing coat (grey) Standard applications Internal installation in heated buildings Air huidity up to 90% Internal installation in non-heated buildings Covered, protected external installation Air huidity up to 95% External installation Air huidity above 95% Cheical industry plants Food industry Surface coating as per corrosivity category C1 (in line with EN ) Surface coating as per corrosivity category C2 (in line with EN ) Surface coating as per corrosivity category C3 (in line with EN ) Blower cover and B end shield additionally pried Screws zinc-coated Cable glands with gaskets Corrosion-resistant brake with cover ring, stainless friction plate, and chroe-plated arature plate (on request) Optional easures: Motor recesses sealed off (on request) Structure of surface coating Surface and corrosion protection syste Corrosivity category DIN EN ISO Surface coating Structure Colour Without OKS (uncoated) OKS-G (pried) OKS-S (sall) OKS-M (ediu) OKS-L (high) C1 C2 C3 2K PUR priing coat 2K-PUR top coat 2K PUR priing coat 2K-PUR top coat Standard: RAL 7012 Optional: RAL Classic V01-en_GB-02/2014

265 MH three-phase AC otors General inforation Motor inverter assignent Rated frequency 50/60 Hz ƒ ƒ Decentralised inverter 8400 otec (E84DVB) Inverter Drives 8400 (E84AV) Rated power Motor Product key Inverter P N [kw] 0.75 MH E84DVB 7514S 2 0 MH E84DVB 1124S MH E84DVB 1524S MH E84DVB 2224S MH E84DVB 3024S MH E84DVB 4024S MH E84DVB 5524S MH E84DVB 7524S 2 1 MH MH MH MH MH MH MH V01-en_GB-02/

266 MH three-phase AC otors General inforation Motor inverter assignent Rated frequency 87 Hz ƒ ƒ Decentralised inverter 8400 otec (E84DVB) Inverter Drives 8400 (E84AV) Rated power Motor Product key Inverter P N [kw] 5 MH E84DVB 1524S MH E84DVB 2224S MH E84DVB 3024S MH E84DVB 4024S MH E84DVB 5524S MH E84DVB 7524S MH MH MH MH MH V01-en_GB-02/2014

267 MH three-phase AC otors General inforation Diensioning Torque derating at low otor frequencies Motor size-dependent torque reduction, taking into account the theral response during operation on the inverter. Torque characteristics A = Operation with integral fan and brake B = Operation with integral fan and brake control "Holding current reduction" ƒ The otor specifications stated in this catalogue for inverter operation apply to operation with a Lenze inverter. If you are uncertain, get in touch with the anufacturer of the inverter to ask whether the device is capable of driving the otor with the stated specifications (e.g. setting range, base frequency). You can use the Drive Solution Designer for precise drive diensioning. The Drive Solution Designer helps you to carry out a fast and highquality drive diensioning. The software includes well-founded and proven knowledge on drive applications and electro-echanical drive coponents Please contact your Lenze sales office. V01-en_GB-02/

268 MH three-phase AC otors General inforation V01-en_GB-02/2014

269 MH three-phase AC otors Technical data Standards and operating conditions Enclosure EN Energy efficiency class IEC IEC Approval Class Teperature class IEC/EN ; utilisation IEC/EN ; insulation syste (enael-insulated wire) Min. abient operating teperature Max. abient operating teperature With power reduction Site altitude Asl Max. speed T opr,in [ C] IP55 IE2 Methodology for easuring efficiency curus/ul Energy-verified 1) CCC GOST-R UkrSepro B F -20 T opr,ax [ C] 40 T opr,ax [ C] 60 H ax n ax [] [r/in] ) Motor frae size 225, in preparation. ƒ In the European Union, the ErP Directive stipulates iniu efficiency levels for three-phase AC otors. Geared three-phase AC otors that do not confor with this Directive do not eet CE requireents and ust not be arketed in the European Econoic Area. For further inforation about the ErP Directive and the Lenze products to which it relates, please refer to the brochure entitled "International efficiency directives for threephase AC otors" V01-en_GB-02/

270 MH three-phase AC otors Technical data Rated data for 50 Hz 4-pole otors P U 2) N n N N, Δ I N, Δ U N, Y ± 10 % I N, Y I a /I N ± 10 % [kw] [r/in] [V] [A] [V] [A] MH MH MH MH MH MH MH MH MH MH MH MH MH 180- MH MH ) ) ) ) ) ) ) ) ) M N [N] M a [N] M b [N] cos ϕ η 50 % [%] η 75 % [%] η 100 % [%] J 1) [kgc²] 1) MH MH MH MH MH MH MH MH MH MH MH MH MH 180- MH MH ) Without accessories 2) Operation at 87 Hz is possible with 4-pole otors whose rated data at 50 Hz displays the voltage values Δ 230 V. With otor frae sizes to , the required voltage ust also be specified in your order. 3) Star/delta start-up possible at 400 V V01-en_GB-02/2014

271 MH three-phase AC otors Technical data Rated data for 60 Hz 4-pole otors ƒ The otors are designed for an operation at 265/460 V but are also able to be operated at 230 V, 60 Hz. The sae technical data apply, the starting torque is a bit lower. ƒ The otors have a service factor of 5 at 60 Hz. The service factor indicates the perissible overload during operation within the ains voltage fluctuations. P U 2) N n N N, Δ I N, Δ U N, Y ± 10 % I N, Y I a /I N ± 10 % [kw] [r/in] [V] [A] [V] [A] MH MH MH MH MH MH MH MH MH MH MH MH MH 180- MH MH ) ) ) ) ) ) ) ) ) M N [N] M a [N] M b [N] cos ϕ η 50 % [%] η 75 % [%] η 100 % [%] J 1) [kgc²] 1) MH MH MH MH MH MH MH MH MH MH MH MH MH MH MH ) Without accessories 2) Operation at 87 Hz is possible with 4-pole otors whose rated data at 60 Hz displays the voltage values Δ 265 V. With otor frae sizes to , the required voltage ust also be specified in your order. 3) Star/delta start-up possible at 460 V. V01-en_GB-02/

272 MH three-phase AC otors Technical data Rated data for 87 Hz 4-pole otors P N n N M N M ax U N, Δ ± 10 % I N, Δ cos ϕ η 50 % η 75 % η 100 % J 1) 1) [kw] [r/in] [N] [N] [V] [A] [%] [%] [%] [kgc²] MH MH MH MH MH MH MH MH MH MH MH MH MH MH MH ) Without accessories V01-en_GB-02/2014

273 MH three-phase AC otors Technical data Diensions, self-ventilated (4-pole) Motor type MHEMAXX MHEMABR MHEMABS MHEMABI MHEMABA MHEMALL MHEMARS MHEMAIG MHEMAAG Motor frae size Δ k Δ k Δ k Δ k [] [] [] [] V01-en_GB-02/

274 MH three-phase AC otors Technical data Diensions, forced ventilated (4-pole) Motor type MHFMAXX MHFMABR MHFMABS MHFMABI MHFMABA MHFMARS MHFMAIG MHFMAAG Motor frae size Δ k Δ k Δ k Δ k k 4 g 3 2 n 3 P 6 [] [] [] [] [] [] [] [] [] x M16x V01-en_GB-02/2014

275 MH three-phase AC otors Technical data Diensions, 8400 otec inverter Rated frequency 50/60 Hz Product key Motor Inverter g 1, 50Hz 1, 50Hz n 2, 50Hz x 50Hz [] [] [] [] MH E84DVB 7514S MH MH E84DVB 1124S 2 E84DVB 1524S MH MH E84DVB 2224S 2 E84DVB 3024S MH E84DVB 4024S MH MH E84DVB 5524S 2 E84DVB 7524S V01-en_GB-02/

276 MH three-phase AC otors Technical data Diensions, 8400 otec inverter Rated frequency 87 Hz Product key Motor Inverter g 1, 87Hz 1, 87Hz n 2, 87Hz x 87Hz [] [] [] [] MH E84DVB 1524S MH MH E84DVB 2224S 2 E84DVB 3024S MH MH E84DVB 4024S 2 E84DVB 5524S MH E84DVB 7524S V01-en_GB-02/2014

277 MH three-phase AC otors Accessories Spring-applied brake Three-phase AC otors can be fitted with a spring-applied brake. This is activated after the supply voltage is switched off (closed-circuit principle). For optiu adjustent of the brake otor to the application, a range of braking torques and control odes is available for every otor frae size. For applications with very high operating frequencies the brake is also available in a LongLife version, with reinforced echanical brake coponents. Features Versions Control Standard DC supply - 1 x 10 6 repeating switching cycles AC supply via rectifier in the terinal box - 1 x 10 6 reversing switching cycles LongLife Enclosure - 10 x 10 6 repeating switching cycles Without anual release IP55-15 x 10 6 reversing switching cycles With anual release IP54 Assignent of 4-pole otors and brakes Friction lining Non-asbestos, low wearing Options Manual release UL/CSA approval Noise-reduced Design Standard Standard LongLife LongLife Motor frae size Size Brake Rated torque Size Brake Rated torque M k M k [N] [N] V01-en_GB-02/

278 MH three-phase AC otors Accessories Spring-applied brake Assignent of 4-pole otors and brakes Design Standard LongLife Motor frae size Size Brake Rated torque Size Brake Rated torque M k [N] M k [N] V01-en_GB-02/2014

279 MH three-phase AC otors Accessories Spring-applied brake Direct connection without rectifier If the brake is activated directly without a rectifier, a freewheeling diode or a spark suppressor is required to protect against induction peaks. Supply voltages DC 24 V DC 180 V DC 205 V Connection via ains voltage with brake rectifier If the brake is not directly supplied with DC voltage, a rectifier is required. This is included in the scope of supply and is located in the terinal box of the otor. The rectifier converts the AC voltage of the connection into DC voltage. The following rectifiers are available: Half-wave rectifier, 6-pole Ratio of supply voltage to brake coil voltage = 2.22 Approved by UL/CSA Supply voltages AC 230 V AC 400 V AC 460 V Bridge rectifier, 6-pole Ratio of supply voltage to brake coil voltage = 1 Supply voltage AC 230 V Bridge/half-wave rectifier, 6-pole Ratio of supply voltage to brake coil voltage up to overexcitation tie = 1 beyond overexcitation tie = 2.22 Supply voltages: AC 230 V AC 400 V 6.11 V01-en_GB-02/

280 MH three-phase AC otors Accessories Spring-applied brake Connection via ains voltage with brake rectifier Bridge/half-wave rectifier, 6-pole Ratio of supply voltage to brake coil voltage up to overexcitation tie = 1 beyond overexcitation tie = 2.22 Supply voltages: AC 230 V AC 400 V During the switching operation the bridge/half-wave rectifier functions as a bridge rectifier for the overexcitation tie t ü and then as a half-wave rectifier. This cobination optiises the perforance of the brake depending on the assignent of brake coil voltage and supply voltage: Short-tie overexcitation of the brake coil Activating the brake coil for the overexcitation tie t ü with twice the rated voltage allows the disengageent tie to be reduced. The brake opens ore quickly and wear on the friction lining is reduced. These features ake this activation version particularly suitable for lifting applications. It is therefore only available in cobination with a brake with increased braking torque. Holding current reduction (cold brake) By reducing the holding current, the bridge/half-wave rectifier is able to reduce the power input to the open brake. As the brake heats up less, this type of activation is known as "cold brake" V01-en_GB-02/2014

281 MH three-phase AC otors Accessories Spring-applied brake Perissible friction energy Q =Switching energy per switching cycle S h =Operating frequency Brake size = 06 to V01-en_GB-02/

282 MH three-phase AC otors Accessories Spring-applied brake Rated data with reduced braking torque ƒ Please enquire for braking torques and axiu switching work values not listed here. Size Power input P in [kw] Braking torque 100 M B [N] M B [N] M B [N] M B [N] ) 193 1) 1800 M B [N] ) 3000 M B [N] ) ) 3600 Maxiu switching energy M B [N] ) 100 Q E [KJ] Q E [KJ] Q E [KJ] Q E [KJ] ) ) 1800 Q E [KJ] ) 3000 Q E [KJ] ) 1 1) 3600 Transition operating frequency Q E [KJ] ) S hü [1/h] Moent of inertia J [kgc²] Mass ) In the region of the load liit the value for friction energy Q BW can be reduced to 40 % V01-en_GB-02/2014

283 MH three-phase AC otors Accessories Spring-applied brake Rated data with reduced braking torque ƒ Activation via half-wave or bridge rectifier Size Friction energy Delay tie Engaging Rise tie Braking torque Engageent tie Disengageent tie Q BW t 11 t 12 t 1 t 2 [MJ] [s] [s] [s] [s] ƒ Activation via bridge/half-wave rectifier Design Size Friction energy Overexcitation tie Min. rest tie Delay tie Engaging Rise tie Braking torque Engageent tie Disengageent tie Q BW t ü t t 11 t 12 t 1 t 2 [MJ] [s] [s] [s] [s] [s] [s] Holding current reduction (cold brake) ƒ The brake response and application ties are guide values. The engageent tie is 10 ties longer with AC-side switching. With the axiu air gap the disengageent tie t 2 depending on the brake and control is up to 4 ties longer than the disengageent tie with the rated air gap V01-en_GB-02/

284 MH three-phase AC otors Accessories Spring-applied brake Rated data with standard braking torque ƒ Please enquire for braking torques and axiu switching work values not listed here. Size Power input P in [kw] Braking torque 100 M B [N] M B [N] M B [N] M B [N] ) 291 1) 1800 M B [N] ) 3000 M B [N] ) ) 3600 Maxiu switching energy M B [N] ) 100 Q E [KJ] Q E [KJ] Q E [KJ] Q E [KJ] ) ) 1800 Q E [KJ] ) 3000 Q E [KJ] ) 1 1) 3600 Transition operating frequency Q E [KJ] ) S hü [1/h] Moent of inertia J [kgc²] Mass ) In the region of the load liit the value for friction energy Q BW can be reduced to 40 % V01-en_GB-02/2014

285 MH three-phase AC otors Accessories Spring-applied brake Rated data with standard braking torque ƒ Activation via half-wave or bridge rectifier Size Friction energy Delay tie Engaging Rise tie Braking torque Engageent tie Disengageent tie Q BW t 11 t 12 t 1 t 2 [MJ] [s] [s] [s] [s] ƒ Activation via bridge/half-wave rectifier Design Size Friction energy Overexcitation tie Min. rest tie Delay tie Engaging Rise tie Braking torque Engageent tie Disengageent tie Q BW t ü t t 11 t 12 t 1 t 2 [MJ] [s] [s] [s] [s] [s] [s] Holding current reduction (cold brake) ƒ The brake response and application ties are guide values. The engageent tie is 10 ties longer with AC-side switching. With the axiu air gap the disengageent tie t 2 depending on the brake and control is up to 4 ties longer than the disengageent tie with the rated air gap V01-en_GB-02/

286 MH three-phase AC otors Accessories Spring-applied brake Rated data with increased braking torque ƒ Please enquire for braking torques and axiu switching work values not listed here. Size Power input P in [kw] Braking torque 100 M B [N] M B [N] M B [N] M B [N] ) 300 1) 356 1) 436 1) 1800 M B [N] ) 3000 M B [N] ) 7 1) ) 3600 Maxiu switching energy M B [N] ) 100 Q E [KJ] Q E [KJ] Q E [KJ] Q E [KJ] ) ) ) ) 1800 Q E [KJ] ) 3000 Q E [KJ] ) 1 1) 1 1) 3600 Transition operating frequency Q E [KJ] ) S hü [1/h] Moent of inertia J [kgc²] Mass ) In the region of the load liit the value for friction energy Q BW can be reduced to 40 %. ƒ Activation via half-wave or bridge rectifier Size Friction energy Q BW [MJ] Delay tie Engaging Rise tie t 11 [s] Braking torque Engageent tie t 12 [s] t 1 [s] Disengageent tie t 2 [s] V01-en_GB-02/2014

287 MH three-phase AC otors Accessories Spring-applied brake Rated data with increased braking torque ƒ Activation via bridge/half-wave rectifier Design Size Friction energy Overexcitation tie Min. rest tie Delay tie Engaging Rise tie Braking torque Engageent tie Disengageent tie Q BW t ü t t 11 t 12 t 1 t 2 [MJ] [s] [s] [s] [s] [s] [s] Holding current reduction (cold brake) Design Size Friction energy Overexcitation tie Min. rest tie Delay tie Engaging Rise tie Braking torque Engageent tie Disengageent tie Q BW t ü t t 11 t 12 t 1 t 2 [MJ] [s] [s] [s] [s] [s] [s] Over-excitation ƒ The brake response and application ties are guide values. The engageent tie is 10 ties longer with AC-side switching. With the axiu air gap the disengageent tie t 2 depending on the brake and control is up to 4 ties longer than the disengageent tie with the rated air gap V01-en_GB-02/

288 MH three-phase AC otors Accessories Spring-applied brake Manual release lever Motor frae size Size Brake k 5 Δ k h 5 d 12 [] [] [] [] The following cobinations with anual release lever and otor connection in the sae position are not possible: HAN connector with connection in position 1 Inverter otec Terinal box of otor sizes 080, 090, for brake and retracting (M MA BR/BS/BA/BI) V01-en_GB-02/2014

289 MH three-phase AC otors Accessories Resolver Stator-fed resolver with two stator windings offset by 90 and one rotor winding with transforer winding. ƒ The three-phase AC otors with resolver cannot be used for speed-dependent safety functions in connection with the SM 301 safety odule. Product key Accuracy Absolute positioning Max. input voltage DC Max. input frequency Ratio Stator / rotor Rotor ipedance Stator ipedance Ipedance Min. insulation resistance At DC 500 V Nuber of pole pairs U in,ax f in,ax Z ro Z so Z rs R ± 5 % ['] [V] [khz] [Ω] [Ω] [Ω] [MΩ] RS revolution j j j V01-en_GB-02/

290 MH three-phase AC otors Accessories Increental encoder and SinCos absolute value encoder ƒ The three-phase AC otors with increental encoders or SinCos absolute value encoders cannot be used for speed-dependent safety functions in connection with the SM 301 safety odule. Encoder type Product key Encoder type Pulses Output signals Interfaces Absolute revolutions Accuracy Min. input voltage DC Max. input voltage DC Max. current consuption Liit frequency Inverter assignent U in,in U in,ax I ax f ax ['] [V] [V] [A] [khz] IG128-24V- H 128 A, B track E84AVSC E84AVHC HTL increental IG512-24V-H 512 HTL 8.00 IG V-H E84AVHC IG V-H 2048 IG512-5V-T 512 A, B, N track and inverted TTL increental IG1024-5V-T 1024 TTL E84AVTC E94A ECS EVS93 IG2048-5V-T 2048 SinCos absolute value AM1024-8V-H Multiturn Vss Hiperface Inverters Inverter Drives 8400 StateLine (E84AVSC) Inverter Drives 8400 HighLine (E84AVHC) Inverter Drives 8400 TopLine (E84AVTC) Servo-Inverters Servo Drives 9400 (E94A) 9300 servo inverters (EVS93) Servo Drives ECS V01-en_GB-02/2014

291 MH three-phase AC otors Accessories Blowers ƒ The use of a blower enables operation below 20 Hz without torque derating. Rated data for 50 Hz Size Motor Nuber of phases 1 Connection ethod U in [V] 230 U ax [V] 277 P ax [kw] Δ Y Δ Y Δ Y I ax [A] Δ Y Δ Y Δ Y Δ Y Δ Y Δ Y V01-en_GB-02/

292 MH three-phase AC otors Accessories Blowers Rated data for 50 Hz Size Motor Nuber of phases 1 Connection ethod U in [V] 230 U ax [V] P ax [kw] 200 Δ Y Δ Y I ax [A] Rated data for 60 Hz 6.11 Size Motor Nuber of phases 1 Connection ethod U in [V] 230 U ax [V] 277 P ax [kw] Δ Y Δ Y Δ Y Δ Y Δ Y Δ Y Δ Y Δ Y Δ Y Δ Y Δ Y I ax [A] V01-en_GB-02/2014

293 MH three-phase AC otors Accessories Teperature onitoring ƒ The theral sensors are integrated in the windings. The use of an additional otor protection switch is recoended. TKO theral contacts Function Operating teperature Min. reset teperature Max. reset teperature Max. input current Max. input voltage AC T T in T ax I in,ax U in,ax [ C] [ C] [ C] [A] [V] NC contact PTC theristor Function Operating teperature 155 C Rated resistance -20 C 140 C Standard T R N R N R N [ C] [Ω] [Ω] [Ω] Sudden change in resistance DIN DIN VDE 0660 Part V01-en_GB-02/

294 MH three-phase AC otors Accessories Teperature onitoring KTY teperature sensor Function Rated resistance Max. input current 25 C 150 C 170 C 25 C 170 C R N R N R N I in,ax I in,ax [Ω] [Ω] [Ω] [A] [A] KTY Continuous resistance change KTY Continuous resistance change Variation of resistance ƒ If the detector is supplied with a easured current of 1 A, the above relationship between the teperature and the resistance applies V01-en_GB-02/2014

295 MH three-phase AC otors Accessories Terinal box The three-phase AC otors are designed for operation at a constant ains frequency and with an inverter. For 50 Hz operation, the otors are operated in Δconfiguration at 230 V or in star configuration at 400 V. For inverter operation, the base frequency has been specified as 87 Hz at a rated voltage of 400 V in Δconfiguration. In the standard version, the otors are connected in the terinal box. As an option, the otors are also available with the connectors described on the following pages as long as the perissible ratings are not exceeded. Motor terinal box - built-on accessories assignent: 4-pole / 6-pole otors Motor type M MAXX M MARS M MAIG M MAAG M MAZE M MAHA M MALL M MALZ M MALH Motor frae size Terinal box KK1 KK1 KK1 KK1 KK1 KK1 KK1 KK1 KK3 KK3 KK3 KK2 KK2 KK2 KK2 KK2 KK2 KK2 KK3 KK3 KK3 KK3 KK2 KK2 KK2 KK2 KK2 KK3 KK1 KK1 KK1 KK2 KK1 KK1 KK1 KK1 KK1 KK2 KK1 KK V01-en_GB-02/

296 MH three-phase AC otors Accessories Terinal box Motor terinal box - built-on accessories assignent: 4-pole / 6-pole otors Motor type M MABR M MABS M MABI M MABA M MABZ M MABH M MABL Motor frae size Terinal box KK2 KK2 KK2 KK2 KK2 KK2 KK2 KK3 KK3 KK3 KK3 KK3 KK3 KK3 KK3 KK3 KK3 KK3 KK3 KK3 KK3 KK3 KK2 KK2 KK2 KK2 KK2 KK3 KK2 KK2 KK2 KK2 KK2 KK V01-en_GB-02/2014

297 MH three-phase AC otors Accessories Terinal box Diensions of KK1 ƒ ƒ For otors with otor terinal box KK1, the connector position can be selected in accordance with the terinal box position. If preferred positions are not specified in the order, the cable entry will be positioned as circled on the diagra below. Size Motor x g 1 1 n 2 P 1 P 2 [] [] [] [] [] [] ) ) ) ) ) ) M16x1.5 M20x1.5 1) M20x1.5 M20x M20x1.5 M25x M32x1.5 M32x1.5 1) UL/CSA approval: curus 6.11 V01-en_GB-02/

298 MH three-phase AC otors Accessories Terinal box Cable entry position when using KK1 Terinal box in position 2 Terinal box in position 3 Terinal box in position 4 Terinal box in position V01-en_GB-02/2014

299 MH three-phase AC otors Accessories Terinal box Diensions of KK2 Size Motor x g 1 1 n 2 P 1 P 2 [] [] [] [] [] [] M16x1.5 M20x M20x1.5 M25x V01-en_GB-02/

300 MH three-phase AC otors Accessories Terinal box Diensions of KK3 Size Motor x g 1 1 n 2 P 1 P 2 P 3 P 4 P 5 [] [] [] [] [] [] [] [] [] M25x1.5 M32x1.5 M20x M20x M50x1.5 M16x1.5 M16x M63x1.5 1) M50x1.5 1) M16x1.5 1) Cable entry only possible at one position. Terinal box position 2: cable entry at position 5. Terinal box position 3: cable entry at position 2. Terinal box position 4: cable entry at position 3. Terinal box position 5: cable entry at position V01-en_GB-02/2014

301 MH three-phase AC otors Accessories Plug connectors ICN, HAN and M12 connectors (only for IG128-24V-H increental encoder) are available for the three-phase AC otors. ICN connector A connector is used for power, brake and teperature onitoring. The connections to the feedback syste and the blower each eploy a separate connector. Connection for power, brake and teperature onitoring The connectors can be rotated through 270 and are fitted with a bayonet catch for SpeedTec connectors. As this connector is also copatible with conventional union nuts, existing ating connectors can continue to be used without difficulty. The otor connection is deterined in the terinal box and ust be checked before coissioning. ƒ ICN 6-pole Pin assignent Contact Designation 1 BD1 / BA1 2 BD2 / BA2 PE PE 4 U 5 V Meaning Brake +/AC Brake /AC PE conductor Phase U power Phase V power 6 W Phase W power ƒ ICN 8-pole Pin assignent Contact Designation 1 U PE PE 3 V 4 W A TB1 / TP1 / R1 B TB2 / TP2 / R2 C BD1 / BA1 D BD2 / BA2 Meaning Phase U power PE conductor Phase V power Phase W power Theral sensor: TKO/PTC/ +KTY Theral sensor: TKO/PTC/-KTY Brake +/AC Brake /AC 6.11 V01-en_GB-02/

302 MH three-phase AC otors Accessories ICN connector Feedback connection All encoder systes (apart fro IG128-24V-H) are also available with an ICN connector fixed to the otor terinal box for exceptionally fast coissioning. The connectors are fitted with a bayonet fixing, which is also copatible with conventional union nuts. Existing ating connectors can therefore continue to be used without difficulty. ƒ Resolver Pin assignent Contact Designation +Ref -Ref +VCC ETS +COS -COS +SIN -SIN +KTY -KTY Meaning Transforer windings Supply: Electronic naeplate Cosine stator windings Sine stator windings Not assigned KTY teperature sensor ƒ Hiperface increental encoder and SinCos absolute value encoder Pin assignent Contact Designation Meaning 1 B Track B/+SIN 2 A Track A inverse/-cos 3 A Track A/+COS 4 +U B Supply + 5 GND Mass Z Zero track inverse/-rs485 7 Z Zero track/+rs485 8 Not assigned 9 B Track B inverse/-sin 10 Not assigned KTY -KTY KTY teperature sensor V01-en_GB-02/2014