MPR planetarygeared. Gearboxes Nm (synchronous servo motors)
|
|
|
- Ira Cross
- 5 years ago
- Views:
Transcription
1 Gearboxes MPR planetarygeared motors Nm (synchronous servo motors) Phone: Fax: Web: info@clrwtr.com
2 Contents General information ist of abbreviations information Equipment The gearbox kit Dimensioning Selection tables, notes Selection tables Dimensions, notes Dimensions, self-ventilated motors Dimensions, ventilated motors Weights, self-ventilated motors Weights, ventilated motors Surface and corrosion protection Phone: Fax: Web: info@clrwtr.com
3 General information ist of abbreviations c i J m M 2 M 2, max n 2, eto n 2, th [kgcm²] [kg] oad capacity Ratio Moment of inertia Mass Output torque Max. output torque Transition speed Thermal limit speed CCC CE CSA curus DIN EMC EN GOST IEC IM IP NEMA U UR VDE China Compulsory Certificate Communauté Européenne Canadian Standards Association Combined certification marks of U for the USA and Canada Deutsches Institut für Normung e.v. Electromagnetic compatibility European standard Certificate for Russian Federation International Electrotechnical Commission International Mounting Code International Protection Code National Electrical Manufacturers Association Underwriters aboratory isted Underwriters aboratory Recognized Verband deutscher Elektrotechniker (Association of German Electrical Engineers) enze V01-en_GB-04/2014 Phone: Fax: Web: info@clrwtr.com - 5
4 General information information The combination of Vogel MPR/MPG planetary gearboxes and enze Version servo motors is the optimum solution for dynamic or highly dynamic applications requiring the highest precision. These solutions cater to Robust planetary gearbox with solid shaft (MPR)or flanged shaft the requirements such as those encountered on a daily basis in the (MPG) printing and packaging industry, as well as in the fields of handling High precision for the application thanks to low backlash (min. <=1 and robot technology, filling and materials handling technology and, angular minutes) in many cases, also general engineering. Efficient drive solutions with high efficiency (95 97 %) The MPR/MPG planetary gearboxes feature a higher-than-average torsional stiffness combined with a backlash down to one angular minute. Their combination with synchronous servo motors and MCA asynchronous servo motors creates flexible and particularly energy-efficient solutions which cover virtually every application. Any mounting position which can be changed subsequently as well Enclosure IP65 (dust-tight, protection against water jets under any angle) The product name Gearbox type range Rated torque MPR Planetary gearbox MPR MPR MPR MPR - 6 enze V01-en_GB-04/2014 Phone: Fax: Web: info@clrwtr.com
5 MPR planetary geared motors General information Equipment Overview The equipment includes all the options available as standard and all the built-on accessories of the product. Motor connection Connector Terminal box Cooling self-ventilated ventilated Feedback Resolver Incremental encoder Absolute value encoder Output shaft Solid shaft without keyway Permanent magnet brake Housing design Temperature monitoring Flange with through holes KTY PTC enze V01-en_GB-04/ Phone: Fax: Web: info@clrwtr.com
6 General information The gearbox kit Geared motor Motor type Servo motor Nm Nm Nm Nm Nm Output torque Output speed Ratio oad capacity Moment of inertia Mounting position Standard Colour Surface and corrosion protection MPR 06 MPR 09 Synchronous servo motor 12 See selection table See selection table See selection table See selection table See selection table Any MPR 14 primed (RA 9005M, matt jet black) Without OKS(uncoated) OKS-G (primed) 19 MPR enze V01-en_GB-04/2014 Phone: Fax: Web: info@clrwtr.com - 9
7 General information The gearbox kit Motor details Connection type Permanent magnet holding brake Rated torque Brake voltage [V] Feedback Cooling Temperature monitoring Approval Degree of protection 06C 06C 06F 06F 06I 06I Plug connectors 2.2 KTY-110 thermal detector Self-ventilated 09 09D 09 09D 09F 09F 09H 09H H D H15 12D20 12D35 12H D 12H DC 24 Plug connectors Terminal box With absolute value encoder With incremental encoder With resolver 14D H12 14P11 14P14 14D15 14H H28 14P D30 14H32 14P32 14D Self-ventilated Forced-ventilated KTY-110 thermal detector PTC thermistor curus GOST_R UkrSepro IP IP65 19F12 19P12 19J12 19P14 19J14 19F14 19J 19P 19F 19J30 19F30 19P30 37 ƒ Further information and installation feasibilities can be found in the Motors chapter enze V01-en_GB-04/2014 Phone: Fax: Web: info@clrwtr.com
8 General information The gearbox kit Motor details Connection type Cooling: self-ventilated Cooling: ventilated enze V01-en_GB-04/ Phone: Fax: Web: info@clrwtr.com
9 General information The gearbox kit Gearbox details Driven shaft Solid shaft without keyway Design Gasket Bearing Housing Housing version Output flange Flange square ubricant Type Breather element Backlash Backlash MPR 16x28 62 MPR MPR 22x36 32x Standard NBR Standard Without foot with centering Mobil SHC 6 Without Standard Reduced MPR x82 1 ƒ Further information and installation feasibilities can be found in the Gearboxes chapter enze V01-en_GB-04/2014 Phone: Fax: Web: info@clrwtr.com
10 General information The gearbox kit Gearbox details Solid shaft enze V01-en_GB-04/ Phone: Fax: Web: info@clrwtr.com
11 General information Dimensioning General information about the data provided in this catalogue The powers, torques and speeds specified in this catalogue are rounded values and are valid under the following conditions: Operating time/day = 8 h (% OT) Duty class I for up to 10 switching operations/h Mounting positions and designs in this catalogue Standard lubricant T amb = 30 C for gearboxes, T amb = C for motors (in accordance with EN 034) Site altitude < = 0 m amsl The selection tables provide the permissible mechanical powers and torques. For notes on the thermal power limit, see chapter drive dimensioning. The rated power specified for motors and geared motors applies to operating mode S1 (in accordance with EN 034). Under different operating conditions, the values obtained may vary from those listed here. In the case of extreme operating conditions, please consult your enze sales office enze V01-en_GB-04/2014 Phone: Fax: Web: info@clrwtr.com
12 MPR planetary geared motors General information Dimensioning oad capacity and application factor oad capacity c of gearbox Rated value for the load capacity of enze geared motors. c is the ratio of the permissible rated torque of the gearbox to the rated torque supplied by the drive component (e.g. the built-in enze motor). The value of c must always be greater than the value of the application factor k calculated for the application. Application factor k (according to DIN 3990) Takes into account the influence of temporally variable loads which are actually present during the anticipated operating time of gearboxes and geared motors. k is determined by: the type of load the load intensity temporal influences Duty class oad type I Smooth operation, small or light jolts II Uneven operation, average jolts III Uneven operation, severe jolts and/or alternating load Application factor k k 24 h 16 h 8 h 1.0 III II I Sh ƒ Sh= switchings/h enze V01-en_GB-04/ Phone: Fax: Web: info@clrwtr.com
13 General information Dimensioning Weights The values given in the tables consider the following gearbox/motor combination: Gearbox with solid shaft including lubricant amount Motor with feedback For versions deviating from this, additional weights have to be considered. The respective values can be found for: Geared motors with feedback > Chapter: Geared motors/ Motor options: Brake > Chapter: Motors/Accessories Moments of inertia The given moments of inertia of the gearbox refer to the drive shaft. The influence of the ratio (i 2 ) has been considered in the data. When the total moment of inertia of the geared motor is calculated, the values of the geared motors and the brake have to be added. The respective values can be found for: Geared motors with feedback > Chapter: Geared motors//selection tables Motor options: Brake > Chapter: Motors/Accessories - 16 enze V01-en_GB-04/2014 Phone: Fax: Web: info@clrwtr.com
14 MPR planetary geared motors Selection tables, notes Notes on the selection tables The selection tables show the available combinations of gearbox type, number of stages, ratio and motor. They are used only to provide basic orientation. The following legend indicates the structure of the selection tables. Number of the gear stage of the gearbox 2-stage gearboxes Inverter operation Cooling Gearbox For operating mode S1 Torque M2 and thermal output speed n2, th Ratio i Moment of inertia of geared motor For operating mode S2,S3 und S6 Max. permissible acceleration torque of geared motor M2, max and output speed n2, eto Motor Type of motor cooling Page number for dimensions oad capacity of the gearbox c is the ratio between the permissible rated torque of the gearbox and the rated torque of the three-phase motor (converted to the driven shaft). c must be always higher than the service factor k determined for the application k. c M2, zul M 1,N. i. Getr. k enze V01-en_GB-04/ Phone: Fax: Web: info@clrwtr.com
15 MPR planetary geared motors Selection tables 1-stage gearboxes Inverter operation c J [kgcm²] i M2, max n2, th M2 n2, eto Cooling MPR 06F 06I I C C F F I I D D F D F H H D D D F I D F D F H H D D I I D D F F H - 18 enze V01-en_GB-04/2014 Phone: Fax: Web: info@clrwtr.com
16 MPR planetary geared motors Selection tables 1-stage gearboxes Inverter operation c J [kgcm²] i M2, max n2, th M2 n2, eto Cooling MPR 09 09H 4. 12D D F F I I D F D F H H D D D D D D D D H H D H H D D H H D14 enze V01-en_GB-04/ Phone: Fax: Web: info@clrwtr.com
17 MPR planetary geared motors Selection tables 1-stage gearboxes Inverter operation c J [kgcm²] i M2, max n2, th M2 n2, eto Cooling MPR 09D 09D F H F H D D D D D D D D F H H D H H D H H D D D H H H D enze V01-en_GB-04/2014 Phone: Fax: Web: info@clrwtr.com
18 MPR planetary geared motors Selection tables 1-stage gearboxes Inverter operation M2, max n2, th M2 n2, eto c J [kgcm²] i MPR Cooling F H F H D D D H H H D D D H H D D D H D H D D D H H D H H D D H H D14 enze V01-en_GB-04/ Phone: Fax: Web: info@clrwtr.com
19 MPR planetary geared motors Selection tables 1-stage gearboxes Inverter operation M2, max n2, th M2 n2, eto c J [kgcm²] i MPR Cooling D H D D H H D D D D H H F P J F P H F J P H F P D D D H H H D enze V01-en_GB-04/2014 Phone: Fax: Web: info@clrwtr.com
20 MPR planetary geared motors Selection tables 1-stage gearboxes Inverter operation c J [kgcm²] i M2, max n2, th M2 n2, eto Cooling MPR 14H32 12D D D H H D D H H H D D H H D H H D H H H D H F P H D H H F H14 enze V01-en_GB-04/ Phone: Fax: Web: info@clrwtr.com
21 MPR planetary geared motors Selection tables 1-stage gearboxes Inverter operation c J [kgcm²] i M2, max n2, th M2 n2, eto Cooling MPR 14D14 14H H H F P J F P H F P H F D D H H F P J F P H F14-24 enze V01-en_GB-04/2014 Phone: Fax: Web: info@clrwtr.com
22 MPR planetary geared motors Selection tables 1-stage gearboxes Inverter operation c J [kgcm²] i M2, max n2, th M2 n2, eto Cooling MPR 19J14 14P H F P H H D D H H P F D H D H F F F F H H H H P J P P J P J P14 enze V01-en_GB-04/ Phone: Fax: Web: info@clrwtr.com
23 MPR planetary geared motors Selection tables 1-stage gearboxes Inverter operation c J [kgcm²] i M2, max n2, th M2 n2, eto Cooling MPR 19P14 19J12 19P P F F F F H H H H P F J P F P J P F J P P F P P J30-26 enze V01-en_GB-04/2014 Phone: Fax: Web: info@clrwtr.com
24 MPR planetary geared motors Selection tables 1-stage gearboxes Inverter operation c J [kgcm²] i M2, max n2, th M2 n2, eto Cooling MPR 19P30 14P26 19J P P F J P F P J P J P P J P F J P P P F J P P11 enze V01-en_GB-04/ Phone: Fax: Web: info@clrwtr.com
25 MPR planetary geared motors Selection tables 2-stage gearboxes Inverter operation c J [kgcm²] i M2, max n2, th M2 n2, eto Cooling MPR 06C 06C 06F F I I D C F I D C F I C F I C F I C F I C F C F C C C C C C C F F I I D F - 28 enze V01-en_GB-04/2014 Phone: Fax: Web: info@clrwtr.com
26 MPR planetary geared motors Selection tables 2-stage gearboxes Inverter operation c J [kgcm²] i M2, max n2, th M2 n2, eto Cooling MPR 09D 09H 09F H C C C C F C C F I F I D C C I I D F D F H H F I F I D F D H F enze V01-en_GB-04/ Phone: Fax: Web: info@clrwtr.com
27 MPR planetary geared motors Selection tables 2-stage gearboxes Inverter operation c J [kgcm²] i M2, max n2, th M2 n2, eto Cooling MPR 09H 2 06F 2 06I F I D D F H F F I F I 1. 09D D F H F F I F I D D F C C F I F I C F I C F D F H - 30 enze V01-en_GB-04/2014 Phone: Fax: Web: info@clrwtr.com
28 MPR planetary geared motors Selection tables 2-stage gearboxes Inverter operation c J [kgcm²] i M2, max n2, th M2 n2, eto Cooling MPR 09F H D D H H H D D H D D D D F D F H F H D D H H D D F H F H D D H35 enze V01-en_GB-04/ Phone: Fax: Web: info@clrwtr.com
29 MPR planetary geared motors Selection tables 2-stage gearboxes Inverter operation M2, max n2, th M2 n2, eto c J [kgcm²] i MPR Cooling H D D D F H F H D D D H D D F H F H D D F F H H D D H H H D D D F H - 32 enze V01-en_GB-04/2014 Phone: Fax: Web: info@clrwtr.com
30 MPR planetary geared motors Selection tables 2-stage gearboxes Inverter operation c J [kgcm²] i M2, max n2, th M2 n2, eto Cooling MPR 09F H 4. 12D D D H H D D F H F H D D D D D D D D D D D H H H D H H F P enze V01-en_GB-04/ Phone: Fax: Web: info@clrwtr.com
31 MPR planetary geared motors Selection tables 2-stage gearboxes Inverter operation M2, max n2, th M2 n2, eto c J [kgcm²] i MPR Cooling D H H D H H D D D D D D D H H H D H F P H D H H H D H D D D36-34 enze V01-en_GB-04/2014 Phone: Fax: Web: info@clrwtr.com
32 MPR planetary geared motors Selection tables 2-stage gearboxes Inverter operation c J [kgcm²] i M2, max n2, th M2 n2, eto Cooling MPR 2 12H H D H H D D D H H H D H D H H D H D D D H H H D D D H H H12 enze V01-en_GB-04/ Phone: Fax: Web: info@clrwtr.com
33 MPR planetary geared motors Selection tables 2-stage gearboxes Inverter operation c J [kgcm²] i M2, max n2, th M2 n2, eto Cooling MPR D D D H H D D H D D D H D H H H D D D D H D H D D H D D H D D D H D17-36 enze V01-en_GB-04/2014 Phone: Fax: Web: info@clrwtr.com
34 MPR planetary geared motors Dimensions, notes Notes on the dimensions The following legend shows the layout of the dimension sheets. Driven shaft design gearbox Motor Distance of motor centre to the end of connector Motor diameter Total length of the drive without built-on accessories Motor length without built-on accessories Additional length of the built-on accessories (longest version) enze V01-en_GB-04/ Phone: Fax: Web: info@clrwtr.com
35 Dimensions, self-ventilated motors MPR1-stage gearboxes Dimensions with solid shaft and Flange 48 6 B g6 16 k , ength Total length Motor length ength of motor options Motor diameter Distance motor/connection B Δ 06C 06C F 06F 06I I 09D 09D Allgemeintoleranzen Oberflaechen/ general tolerance surface nach: enze V01-en_GB-04/2014 Phone: Fax: Web: info@clrwtr.com Werkst Rohteil Datum/date Name Benennu
36 Dimensions, self-ventilated motors MPR1-stage gearboxes Dimensions with solid shaft and Flange 48 6 B g6 16 k , ength Total length Motor length ength of motor options Motor diameter Distance motor/connection B Δ 09F 09F H 09H D20 12D enze V01-en_GB-04/2014 Allgemeintoleranzen Oberflaechen/ general tolerance surface nach: - 39 Phone: Fax: Web: info@clrwtr.com Werkst Rohteil Datum/date Name Benennu
37 Dimensions, self-ventilated motors MPR: 2-stage gearboxes Dimensions with solid shaft and Flange 48 6 B g6 16 k , ength Total length Motor length ength of motor options Motor diameter Distance motor/connection B Δ 06C C 06F F 06I I 09D Allgemeintoleranzen Oberflaechen/ general tolerance surface nach: enze V01-en_GB-04/2014 Phone: Fax: Web: info@clrwtr.com Werkst Rohteil Datum/date Name Benennu
38 Dimensions, self-ventilated motors MPR, 1-stage gearboxes Dimensions with solid shaft and Flange 7 B 70 g6 22 k6 85 2,5 36 6, ength Total length Motor length ength of motor options Motor diameter Distance motor/connection B Δ 09D 09D F 09F 09H 09H enze V01-en_GB-04/2014 Allgemeintoleranzen Oberflaechen/ general tolerance surface nach: - Phone: Fax: Web: info@clrwtr.com Werkst Rohteil Datum/date Name Benennu
39 Dimensions, self-ventilated motors MPR, 1-stage gearboxes Dimensions with solid shaft and Flange 7 B 70 g6 22 k6 85 2,5 36 6, ength Total length Motor length ength of motor options Motor diameter Distance motor/connection B Δ 12D20 12D H15 12H H D15 14D Allgemeintoleranzen Oberflaechen/ general tolerance surface nach: enze V01-en_GB-04/2014 Phone: Fax: Web: info@clrwtr.com Werkst Rohteil Datum/date Name Benennu
40 Dimensions, self-ventilated motors MPR: 2-stage gearboxes Dimensions with solid shaft and Flange 7 B 70 g6 22 k6 85 2,5 36 6, ength Total length Motor length ength of motor options Motor diameter Distance motor/connection B Δ 06C C 06F F 06I I 09D enze V01-en_GB-04/2014 Allgemeintoleranzen Oberflaechen/ general tolerance surface nach: - Phone: Fax: Web: info@clrwtr.com Werkst Rohteil Datum/date Name Benennu
41 Dimensions, self-ventilated motors MPR: 2-stage gearboxes Dimensions with solid shaft and Flange 7 B 70 g6 22 k6 85 2,5 36 6, ength Total length Motor length ength of motor options Motor diameter Distance motor/connection B Δ 09D F F 09H H Allgemeintoleranzen Oberflaechen/ general tolerance surface nach: enze V01-en_GB-04/2014 Phone: Fax: Web: info@clrwtr.com Werkst Rohteil Datum/date Name Benennu
42 Dimensions, self-ventilated motors MPR, 1-stage gearboxes Dimensions with solid shaft and Flange B A C 90g6 32k ength Total length Motor length ength of motor options Motor diameter Distance motor/connection B Δ 12D20 12D H15 12H H D15 14D enze V01-en_GB-04/2014 Allgemeintoleranzen Oberflaechen/ general tolerance surface nach: - Phone: Fax: Web: info@clrwtr.com Werkst Rohteil Datum/date Name Benennu
43 Dimensions, self-ventilated motors MPR, 1-stage gearboxes Dimensions with solid shaft and Flange B A C 90g6 32k ength Total length Motor length ength of motor options Motor diameter Distance motor/connection B Δ 14H15 14H P14 14P F14 19F30 19J14 19J Allgemeintoleranzen Oberflaechen/ general tolerance surface nach: enze V01-en_GB-04/2014 Phone: Fax: Web: info@clrwtr.com Werkst Rohteil Datum/date Name Benennu
44 Dimensions, self-ventilated motors MPR, 2-stage gearboxes Dimensions with solid shaft and Flange B A C 90g6 32k ength Total length Motor length ength of motor options Motor diameter Distance motor/connection B Δ 09D D 09F F H H enze V01-en_GB-04/2014 Allgemeintoleranzen Oberflaechen/ general tolerance surface nach: - Phone: Fax: Web: info@clrwtr.com Werkst Rohteil Datum/date Name Benennu
45 Dimensions, self-ventilated motors MPR, 2-stage gearboxes Dimensions with solid shaft and Flange B A C 90g6 32k ength Total length Motor length ength of motor options Motor diameter Distance motor/connection B Δ D D 12H H H Allgemeintoleranzen Oberflaechen/ general tolerance surface nach: enze V01-en_GB-04/2014 Phone: Fax: Web: info@clrwtr.com Werkst Rohteil Datum/date Name Benennu
46 Dimensions, self-ventilated motors MPR, 1-stage gearboxes Dimensions with solid shaft and Flange 130g6 k B ength Total length Motor length ength of motor options Motor diameter Distance motor/connection B Δ 14D D36 14H H P enze V01-en_GB-04/2014 Allgemeintoleranzen Oberflaechen/ general tolerance surface nach: - Phone: Fax: Web: info@clrwtr.com Werkst Rohteil Datum/date Name Benennu
47 Dimensions, self-ventilated motors MPR, 1-stage gearboxes Dimensions with solid shaft and Flange 130g6 k B ength Total length Motor length ength of motor options Motor diameter Distance motor/connection B Δ 14P F F J J P P Allgemeintoleranzen Oberflaechen/ general tolerance surface nach: enze V01-en_GB-04/2014 Phone: Fax: Web: info@clrwtr.com Werkst Rohteil Datum/date Name Benennu
48 Dimensions, self-ventilated motors MPR, 2-stage gearboxes Dimensions with solid shaft and Flange 130g6 k B ength Total length Motor length ength of motor options Motor diameter Distance motor/connection B Δ 12D D 12H15 12H H enze V01-en_GB-04/2014 Allgemeintoleranzen Oberflaechen/ general tolerance surface nach: - Phone: Fax: Web: info@clrwtr.com Werkst Rohteil Datum/date Name Benennu
49 Dimensions, self-ventilated motors MPR, 2-stage gearboxes Dimensions with solid shaft and Flange 130g6 k B ength Total length Motor length ength of motor options Motor diameter Distance motor/connection B Δ 14D15 14D H15 14H P F Allgemeintoleranzen Oberflaechen/ general tolerance surface nach: enze V01-en_GB-04/2014 Phone: Fax: Web: info@clrwtr.com Werkst Rohteil Datum/date Name Benennu
50 Dimensions, ventilated motors MPR1-stage gearboxes Dimensions with solid shaft and Flange 48 6 B g6 16 k , ength Total length Motor length ength of motor options Motor diameter Distance motor/connection B Δ 12D D35 enze V01-en_GB-04/2014 Allgemeintoleranzen Oberflaechen/ general tolerance surface nach: - 53 Phone: Fax: Web: info@clrwtr.com Werkst Rohteil Datum/date Name Benennu
51 Dimensions, ventilated motors MPR, 1-stage gearboxes Dimensions with solid shaft and Flange 7 B 70 g6 22 k6 85 2,5 36 6, ength Total length Motor length ength of motor options Motor diameter Distance motor/connection B Δ 12D17 12D H14 12H D14 14D Allgemeintoleranzen Oberflaechen/ general tolerance surface nach: enze V01-en_GB-04/2014 Phone: Fax: Web: info@clrwtr.com Werkst Rohteil Datum/date Name Benennu
52 Dimensions, ventilated motors MPR, 1-stage gearboxes Dimensions with solid shaft and Flange B A C 90g6 32k ength Total length Motor length ength of motor options Motor diameter Distance motor/connection B Δ 12D17 12D H14 12H D14 14D enze V01-en_GB-04/2014 Allgemeintoleranzen Oberflaechen/ general tolerance surface nach: - Phone: Fax: Web: info@clrwtr.com Werkst Rohteil Datum/date Name Benennu
53 Dimensions, ventilated motors MPR, 1-stage gearboxes Dimensions with solid shaft and Flange B A C 90g6 32k ength Total length Motor length ength of motor options Motor diameter Distance motor/connection B Δ 14H12 14H P11 14P F12 19F Allgemeintoleranzen Oberflaechen/ general tolerance surface nach: enze V01-en_GB-04/2014 Phone: Fax: Web: info@clrwtr.com Werkst Rohteil Datum/date Name Benennu
54 Dimensions, ventilated motors MPR, 2-stage gearboxes Dimensions with solid shaft and Flange B A C 90g6 32k ength Total length Motor length ength of motor options Motor diameter Distance motor/connection B Δ 12D D H H34 enze V01-en_GB-04/2014 Allgemeintoleranzen Oberflaechen/ general tolerance surface nach: - 57 Phone: Fax: Web: info@clrwtr.com Werkst Rohteil Datum/date Name Benennu
55 Dimensions, ventilated motors MPR, 1-stage gearboxes Dimensions with solid shaft and Flange 130g6 k B ength Total length Motor length ength of motor options Motor diameter Distance motor/connection B Δ 14D D H H P Allgemeintoleranzen Oberflaechen/ general tolerance surface nach: enze V01-en_GB-04/2014 Phone: Fax: Web: info@clrwtr.com Werkst Rohteil Datum/date Name Benennu
56 Dimensions, ventilated motors MPR, 1-stage gearboxes Dimensions with solid shaft and Flange 130g6 k B ength Total length Motor length ength of motor options Motor diameter Distance motor/connection B Δ 14P F F 19J J P P enze V01-en_GB-04/2014 Allgemeintoleranzen Oberflaechen/ general tolerance surface nach: - 59 Phone: Fax: Web: info@clrwtr.com Werkst Rohteil Datum/date Name Benennu
57 Dimensions, ventilated motors MPR, 2-stage gearboxes Dimensions with solid shaft and Flange 130g6 k B ength Total length Motor length ength of motor options Motor diameter Distance motor/connection B Δ 12D17 12D H14 12H D14 14D H12 14H Allgemeintoleranzen Oberflaechen/ general tolerance surface nach: enze V01-en_GB-04/2014 Phone: Fax: Web: info@clrwtr.com Werkst Rohteil Datum/date Name Benennu
58 Weights, self-ventilated motors 1-stage gearboxes 12H15 06C 06F 06I 09D 09F 09H 09 12D20 12H30 06C 06F 06I 09D 09F 09H 09 12D 12H35 m [kg] MPR m [kg] m [kg] D15 14H P14 19F14 19J D36 14H P32 19F30 19J30 m [kg] MPR m [kg] m [kg] P14 19P stage gearboxes MPR m m m m [kg] [kg] [kg] [kg] 06C 06C F 06F I 06I D 09D F 09F H 09H D20 12D MPR m m [kg] [kg] 12H15 12H30 12H D15 14H15 14D36 14H P F30 42 Weights, ventilated motors 1-stage gearboxes MPR m m m m [kg] [kg] [kg] [kg] 12D17 12D H14 12H D14 14D H12 14H P11 14P26 19F12 19F J12 19J 53 19P12 19P 63 2-stage gearboxes MPR m m [kg] [kg] 12D17 12D H14 12H D14 14D H12 14H enze V01-en_GB-04/ Phone: Fax: Web: info@clrwtr.com
59 Surface and corrosion protection For optimum protection of geared motors against ambient conditions, the surface and corrosion protection system (OKS) offers tailor-made solutions. Various surface coatings combined with other protective measures ensure that the geared motors operate reliably even at high air humidity, in outdoor installations or in the presence of atmospheric impurities. Any colour from the RA Classic collection can be chosen for the top coat. The geared motors are also available unpainted (no surface and corrosion protection). Surface and corrosion protection OKS-G (primed) Applications Dependent on subsequent top coat applied Measures 2K PUR priming coat (grey) Zinc-coated screws Rust-free breather elements Optional measures Stainless steel nameplate Structure of surface coating Surface and corrosion protection Without OKS(uncoated) OKS-G (primed) Surface coating Structure Dipping primed gearbox Dipping primed gearbox 2K PUR priming coat - 62 enze V01-en_GB-04/2014 Phone: Fax: Web: info@clrwtr.com
Automation systems Drive solutions Controls Inverters Motors Gearboxes Engineering Tools
Lforce catalogue Automation systems Drive solutions Controls Inverters Motors Gearboxes Engineering Tools Motors: MCS synchronous servo motors, MCA asynchronous servo motors Gearboxes: MPR/MPG planetary
Automation Systems Drive Solutions Controls Inverters Motors Gearboxes Engineering Tools
L-force catalogue Automation Systems Drive Solutions Controls Inverters Motors Gearboxes Engineering Tools Motors: MD/MH Motor, Gearboxes: g200-w worm gearbox Gearboxes g200-w worm geared motors 0.15 to
Automation systems Drive solutions Controls Inverter Motors Gearboxes Engineering Tools
L-force catalogue Automation systems Drive solutions Controls Inverter Motors Gearboxes Engineering Tools Motors: IE3 three-phase AC motors m550-p, IE3 threephase AC motors m240-p Contents of the L-force
Automation systems Drive solutions Controls Inverters Motors Gearboxes Engineering tools
L-force catalogue Automation systems Drive solutions Controls Inverters Motors Gearboxes Engineering tools Motors: MH three-phase AC motors, Gearboxes: Helical-worm gearboxes Contents of the L-force catalogue
Lenze. Small drives The product range. Meyer Industrie-Electronic GmbH MEYLE Carl-Bosch-Straße Lengerich/Germany
453 778 Small drives The product range Meyer Industrie-Electronic GmbH MEYLE Carl-Bosch-Straße 8 49525 Lengerich/Germany Tel.: +49 (0) 5481-9385-0 Fax: +49 (0) 5481-9385-12 Internet: www.meyle.de E-Mail:
Asynchronous motors. 7/2 Main spindle motors for SIMODRIVE 611 7/2 Introduction
/ Main spindle motors for SIMODRIVE 611 / Introduction /4 Main spindle motors for SIMODRIVE 611 1PH motors with solid shaft/forced ventilation /18 Main spindle motors for SIMODRIVE 611 1PH4 motors with
Project planning EN. Geared servo motors. MCA asynchronous servo motor - g500-b bevel gearbox
Project planning EN Geared servo motors MCA asynchronous servo motor - g500-b bevel gearbox Inhalt Inhalt About this document 5 Document description 5 Further documents 5 Notations and conventions 6 Product
TYPE 2 poles 4 poles 6 poles 8 poles 2 / 4 poles 4 / 8 poles 2 / 8 poles 4 / 16 poles
BAH-BAHS series Overwiew MGM Electric Motors was established in 1950 as a brake motors manufacturer. MGM is today a world leading manufacturer of this line of products. MGM brake motors are designed and
Project planning EN. Servo motors. m850 synchronous servo motor
Project planning EN Servo motors m850 synchronous servo motor Inhalt Inhalt About this document 5 Document description 5 Further documents 5 Notations and conventions 6 Product information 7 Product description
Lenze GÇÇmotion m-var. Lenze. Disco variable speed drives Compact units Variable speed pulleys
Lenze GÇÇmotion m-var 7 731 Lenze Disco variable speed drives Compact units Variable speed pulleys Product key Variable speed drives with gearboxes Product group gearbox Input design Gearbox family D
Electromagnetic clutches and brakes INTORQ and INTORQ
Electromagnetic clutches and brakes INTORQ 14.105 and INTORQ 14.115 7.5 480 Nm setting the standard Product information INTORQ electromagnetic clutches and brakes transmit the drive torque or braking torque
Low backlash planetary gearboxes. Phone: Fax: Web: -
Low backlash planetary gearboxes P R O D U C T C H A R A C T E R I S T I C S L O W B A C K L A S H P L A N E T A R Y G E A R B O X E S The planetary gearbox consists of the coaxial sun gear, planet carrier
TGN, TGH AND TGT SERVOMOTORS
TGN, TGH AND TGT SERVOMOTORS Instruction manual. Information furnished by is believed to be accurate and reliable. However, no responsibility is assumed by TG Drives for its use. TG Drives reserves the
SIMOTICS Frei verwendbar / Siemens AG Alle Rechte vorbehalten.
The most comprehensive range of motors SIMOTICS SIMOTICS portfolio Motors SIMOTICS Low voltage motors for line and inverter operation Motors for motion control application DC motors High-voltage Motors
DYNABLOC Geared Servomotors
DYNABLOC Geared Servomotors Selection guide 5082 en - 2014.01 / b DYNABLOC solutions for intermittent duty applications GEARBOX Planetary or worm/wheel with reduced backlash up to 690 N.m Ratios from 3
DYNASYN DD servo motors. Dynamic. Compact. Energy-efficient.
DYNASYN DD servo motors. Dynamic. Compact. Energy-efficient. B E N E F I T S Maximum dynamic response Increased energy efficiency High cost effectiveness Long service life Single-cable solution 2 DYNASYN
Permanent-magnet synchronous motors
Permanent-magnet synchronous motors Contents Product description 12/2 Overview of technical data 12/4 Motor selection data Series PE.. for Super Premium Efficiency IE4 1) 12/5 Series P, high-power motors
Servomotors. AC brushless servomotors TGT a TGH
Servomotors AC brushless servomotors TGT a TGH AC brushless servomotors TGT The TGT series AC synchronous servomotors are characterized by: low inertia, small dimensions, high dynamics, high adaptability
1LG0 Low-voltage Motors
Low-voltage motors up to 315kW Catalog D81.5.1 1LG Low-voltage Motors Answers for industry. 1 Table of Contents Overview 3 Motor standards 5 Mechanical design 6 Electrical design 1 Converter fed application
Table of contents. Three-phase asynchronous motors DA
be in motion be in motion AC Asynchronous Motors DA 100-280 Table of contents 1. Three-phase asynchronous motor DA 100-280... 3 1.1. General technical data... 3 1.2. Ratings definition for ventilated
KEB Gear units & Motors 2014
Introduction KEB Gear units & Motors 2014 Contents Introduction 2 designation... 2 Product description... 3 Assembly / Disassembly notes when using gear units with hollow shaft... 5 Drive selection...
AMxxxx Synchronous Servomotors
AMxxxx Synchronous Servomotors One Cable Technology (OCT) for power and feedback with absolute encoder Backlash-free permanent magnet holding brake Rotatable speedtec plug Modular design Greatest possible
Lenze. Drives with worm gearboxes 52.
6 887 Lenze Drives with worm gearboxes 5. Lenze Drive Systems GmbH, Postfach 0 5, D-76 Hameln, Site: Groß Berkel, Hans-Lenze-Straße, D-855 Aerzen, Phone ++9 (0) 55 8-0, Telefax ++9 (0) 55 8- E-Mail: Lenze@Lenze.de
KeDrive DMS2 Synchronous Motors
KeDrive DMS2 Synchronous Motors KeDrive DMS2 Synchronous Motors The synchronous servomotors are suitable for almost all servo applications in automation. The high torque density permits a particularly
alphira Economical entry-level model
Economical entry-level model The low backlash planetary gearhead with output shaft. This economical entry level model is suitable for simple applications. The impresses through its quality, availability,
High Performance: EPR Series
High Performance: EPR Series GAM can. If you don t see exactly what you need, let us know. We can modify the EPR Series gearboxes to meet your needs. Page 4 provides a list of commonly requested modifications
The STH is a mid-range speed and torque gear reducer that
STH-SERIES The STH is a mid-range speed and torque gear reducer that sets a new standard for rotary positioning performance at an exceptional price point. A SHIMPO ABE planetary gearbox is the interface
SIMOTICS S-1FT7 Servomotors. The Compact Servomotors for High-Performance Motion Control Applications. Motors. Edition April 2017.
Motors SIMOTICS S-1FT7 Servomotors The Compact Servomotors for High-Performance Motion Control Applications Brochure Edition April 2017 siemens.com/servomotors The Servomotors for High-Performance Applications
premo servo actuators
servo actuators 20 21 the powerful servo actuator platform Absolute precision meets perfect motion: combines precision with motion more efficiently than ever. The central idea behind the first fully scalable
3-phase stepping motors
General Series of Features from Berger Lahr are: Powerful because the optimised internal geometry results in a high power intensity, meaning up to 50 % more torque than standard stepping motors of comparable
DYNASYN Hightorque-Servomotors DT Dynamic. Compact. Powerful.
DYNASYN Hightorque-Servomotors DT Dynamic. Compact. Powerful. Top-class dynamic response: DT compact high-torque motors The DYNASYN DT series of high-torque motors meets the highest requirements made by
Standardmotoren Standard motors
Standardmotoren Standard motors Contents Product description 2/2 Overview of technical data 2/5 2 Series W4.R for Premium Efficiency IE3 2/6 Series WE.R for High Efficiency IE2 2/14 Series K2.R for Standard
Asynchronous and synchronous motors for SINAMICS S120 1PL6 asynchronous motors Forced ventilation, IP23 degree of protection
Overview 1PL6 motors, shaft heights 180 to 22 Benefits 7 Extremely high power density with small motor dimensions (0 to 60 % higher output as compared to 1PH7 in degree of protection IP) 7 Speed down to
Asynchronous motors. 5 Asynchronous motors 5/2 Type overview and rated data 5/4 Technical definitions 5/4 Encoder systems
/ Type overview and rated data /4 Technical definitions /4 Encoder systems / PH7 motors / PH7 motors, forced ventilation / Permissible combinations of mechanical designs for PH7 motors, shaft 8 /4 PL motors
water-cooled motor / generator with up to 13 kw continuous power
water-cooled motor / generator with up to 13 kw continuous power KEY FEATURES permanent magnet synchronous machine water-cooled high peak power for motor applications convincing cost-benefit ratio recommended
TQ-TQK-TR-MP LC-LCK-SL-KR Series. Precision Planetary Gearboxes
TQ-TQK-TR-MP LC-LCK--KR Series Precision Planetary Gearboxes OUR PRODUCTS AT A GLANCE PRODUCT INLINE RIGHT ANGLE PRODUCT LINE-UP CONFIGURATIONS HIGH PERFORMANCE NEW TQ NEW TQK Yes Yes Highest Precision
Torque motors to Nm. Description. Advantages. TMW series
Torque motors 200 to 22 000 Nm Description Parker TMW torque motors are innovative direct drive solutions based on brushless technology. Especially designed for low speed operation, they advantageously
Lenze. Global Drive 9300 servo inverters kw
401 870 Global Drive 9300 servo inverters 0.37 75 kw 9300 servo inverter flexible and modern automation High-performance 9300 servo inverters with a matching motor program form a perfect drive system.
Brushless Servo Motors
Brushless Servo Motors For Highly Dynamic Applications flexible design to support high MACHINE productivity WHAT MOVES YOUR WORLD DYNAMIC APPLICATIONS SUPERIOR PERFORMANCE For over two decades, Moog has
Performance Plus: Spiral Bevel Series
Performance Plus: Spiral Bevel Series GAM Perfomance Plus Miniature Spiral Bevel Gearboxes The VP Series Performance Plus Miniature Bevel Gearboxes pack high performance in a small package with the highest
Modular Explosion Proof Brakes. IECLine rev 0
Modular Explosion Proof Brakes IECLine 2013 rev 0 Application example Standard B5 motor + VIS brake Standard B5 motor + VIS brake + gearbox unit Main Characteristics -PATENT pending design and concept
ASM. Asynchronous Spindle. SEM Limited Faraday Way Orpington, Kent BR5 3QT United Kingdom
NE ASM Asynchronous Spindle Motors SEM Limited Faraday Way Orpington, Kent BR 3QT United Kingdom Tel: +44 ()1689 8847 Fax: +44 ()1689 884884 Email: sales@sem.co.uk Web: www.sem.co.uk Version 2.1 June 211
8JS three-phase synchronous motors Dynamic precision drives
Dynamic precision drives Modern machine concepts demand compact and powerful motors. The compact AC servo motor series from B&R provides ways for the machine manufacturer to further optimize service and
BA EN.CD( Ä.CD(ä. Operating Instructions SDS.. SDSGS. Synchronous servo motors
BA 13.0011 EN.CD( Ä.CD(ä Operating Instructions SDS.. SDSGS Synchronous servo motors Please read these instructions before you start working! Follow the enclosed safety instructions. 0Fig. 0Tab. 0 2 Contents
BTD - BCR. Synchronous Servomotors PRODUCT
BTD - BCR Synchronous Servomotors PRODUCT Bonfiglioli, one name for a large international group. It was back in 1956 that Clementino Bonfiglioli established in Bologna, Italy, the company that still bears
Unimotor fm 230 V 460 V Unimotor fm 230 V / 460 V
Unimotor fm 230 V 460 V Unimotor fm 230 V / 460 V Flexible Configuration C Servo Motors Flexible Configuration C Servo Motors Unimotor fm is a high performance, brushless C Servo motor range matched for
DYNA GEAR. The highly dynamic servo right angle gearbox.
MS- Gr a es s ne r GmbH & Co. K G THE GEAR COM PAN Y The highly dynamic servo right angle gearbox Internal highlights The design of the DynaGear range has been influenced by extremely varied applications
For new perspectives. WPLE - line WPLE
54 - line For new perspectives The is the logical refinement of our PLE series. This bevel gearbox series was designed especially for space-saving installation in a right-angle position of the motor/gearbox
Brushless servo motors as replacements for conventional disk armature motors
MC 17-Bl MC 23-Bl Brushless servo motors as replacements for conventional disk armature motors 1 MOTOR TECHNOLOGY LTD MOTEC HOUSE, CHADKIRK BUSINESS PARK, STOCKPORT, CHESHIRE SK6 3NE ENGLAND TEL: +44 (0)161
Drives for food & beverage machinery. Low and high aseptic. Lenze. ideas in motion
Drives for food & beverage machinery Low and high aseptic Lenze ideas in motion A wide range of Lenze drive products are suitable for use in food & beverage machinery, also other equipment in arduous environments.
general information General information - TEChNiCal CaTalOguE 1039/12
general information General information - TEChNiCal CaTalOguE 1039/12 3 PRODuCT RaNgE mission For 50 years the Lafert Group have been committing to continuous growth by being the global leading manufacturer
6 Motors. BAUER motors are available as standard for the following three-phase line voltages:
56 6 Motors Bauer geared motors for connection to three-phase supply are supplied with specially designed induction motors. This design ensures maximum operating safety with high breakaway torque and minimum
SPH Series GAM CAN, JUST ASK!
SPH Series GAM CAN, JUST ASK! - Highest Precision Class The SPH is GAM s latest solution for today s demanding motion control challenges. Available in six frame sizes and nominal torque ratings ranging
General Specifications. Cooling Method 3M series are IC 411 Standard. IC 416, IC 418 can be provided Upon request
3M SERIES Three Phases Low Voltage Asynchronous Motors 3M Series Vilma motors are designed and manufactured with high quality materials and workmanship in order to meet demanding and arduous operation
Precision on the highest level
6 - line Precision on the highest level The series is the standard Neugart inline high precision planetary gearhead for applications with very high precision requirements. Whether high torque density,
Electromagnetic clutch-brake combinations INTORQ
Electromagnetic clutch-brake combinations INTORQ 14.800 14.867 7.5 120 Nm setting the standard 2 CBC en 5/2005 Contents Clutch-brake combinations Product information 4 Type code 6 Design selection 8 Overview
ZF Friedrichshafen AG Special Driveline Technology. Planetary gearboxes for servomotors
ZF Friedrichshafen G Special Driveline Techlogy Planetary gearboxes for servomotors 2 ZF-Servoplan CG Compact Gearbox ZF-Duoplan 2K Two-speed Gearboxes ZF-Ecolift Elevator Gearboxes ZF-Tiratron Hysteresis
Online data sheet DFS60B-S4CA08192 DFS60 INCREMENTAL ENCODERS
Online data sheet DFS60B-S4C08192 DFS60 B C D E F Illustration may differ Detailed technical data Performance Ordering information Type Part no. DFS60B-S4C08192 1038099 Other models and accessories www.sick.com/dfs60
Asynchronous generators
Asynchronous generators Contents Product description 13/2 Overview of technical data 13/3 Motor selection data Series G4.R on the basis of Premium Efficiency IE3 13/4 Series GE.R on the basis of High Efficiency
Table of Contents. Safety Instructions. MTY (81) QRO (442) MEX (55) DIST.
Table of Contents Safety Instructions In order to obtain long life and trouble-free operation from your STOBER Geared Motor, it is essential that the proper installation and operating procedures be followed.
LSP Servomotors. Order Catalogue. Series: LSP servomotors Stall torque: 0.18 to 18.5 Nm
LSP Servomotors Order Catalogue Series: LSP servomotors Stall torque: 0.18 to 18.5 Nm ID no.: 0814.8B.0-01 Date: 10/01 Subject to technical change without notice. The German version is the original of
FLSD (E) Atmospheres containing explosive GAS totally enclosed three-phase asynchronous motors General information
(E) Atmospheres containing explosive GAS General information Flameproof totally enclosed three-phase asynchronous motors, FLSD (E) series, according to IEC 60034, 60038, 60072, 60079-0 and 60079-1, EN
Servo Motors. Unimotor hd, Unimotor fm, NT Series and XV Series lb-in ( Nm) 230 V 460 V
Servo Motors Unimotor hd, Unimotor fm, NT Series and XV Series 0.9-1204 lb-in (0.11-136 Nm) 230 V 460 V Contents Introduction: A Servo Motor for Every Application... 1 Drive and Motor Selection... 3 Electronic
Customised drive solutions
Customised drive solutions Electric motors & systems Drive components Services Introduction 03 Halm quality drive technology Over 50 years of experience in developing electric motors with asynchronous
Technical catalogue 2012
Technical catalogue 2012 customised MoToRS ThRee-PhaSe MoToRS Single-PhaSe MoToRS BRaKe MoToRS IE2 IE3 CONTENTS General information 3 Product range 4 Standards and regulations 10 Condition of installation
Online data sheet DFS60B-S4EL00800 DFS60 INCREMENTAL ENCODERS
Online data sheet DFS60B-S4EL00800 DFS60 B C D E F Illustration may differ Detailed technical data Performance Ordering information Type Part no. DFS60B-S4EL00800 1053600 Other models and accessories www.sick.com/dfs60
Highest Performance: SPH Series
Highest Performance: Series The series features helical gearing which brings a whole new level of power and precision to GAM s already extensive portfolio of gear reducer technology. With special attention
Modular Flameproof Brakes
Modular Flameproof Brakes New, Easy, Strong 2012 rev 0 INDEX PAG1 PAG2 PAG3 PAG4 PAG5 PAG6 PAG7 PAG8 PAG9-12 About VIS Application example, Main characteristics, Standards Certificates and available protection
Scroll down to view your document!
Over 100 years cumulative experience 24 hour rush turnaround / technical support service Established in 1993 The leading independent repairer of servo motors and drives in North America. Visit us on the
Low backlash planetary gearheads Economy
Low backlash planetary gearheads Economy LP + Innovation sets standards The low-backlash LP + planetary gearhead extends and completes the product portfolio. Up to 75% higher torques oise level halved
Demag KB conical-rotor brake motors. Drives with unique principle
Demag KB conical-rotor brake motors Drives with unique principle 37468 Demag KB conical rotor brake motors: Demag KB conical rotor brake motors offered by Demag Cranes & Components feature a unique principle:
Servomotors and Drive Systems. Fastact H Series and Dx2020 Systems Guide
Fastact H Series and Dx2020 Systems Guide Fastact H Series Servomotors Matched With Dx2020 Drives The Moog Fastact H is a product line of DC permanent magnet servomotors that cover a broad range of torques
CPLS Asynchronous motors for variable frequency. 95 Nm to 2900 Nm
95 Nm to 2900 Nm Introduction The range of IP23 protection CPLS asynchronous motors was designed for fixed and variable speed applications when there is little space available or (and) there is a wide
Asynchronous and synchronous motors for SINAMICS S120 1PL6 asynchronous motors Forced ventilation, IP23 degree of protection
Selection and ordering data speed Shaft height power torque voltage Speed during field weakening 1) Continuous speed, max. 2) Speed, max. 3) 1PL6 asynchronous motor Forced ventilation n rated SH P rated
Table of contents. Three-phase asynchronous motors DA
Table of contents 1. Three-phase asynchronous motor DA 100-280... 5 1.1. General technical data... 5 1.2. General safety instructions... 6 1.3. Definitions of power ratings... 7 1.3.1. Definitions of power
Product Data Sheet 4184 N/17X. The engineer's choice
Product Data Sheet 4184 N/17X The engineer's choice 4184 N/17X INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Electrical Operating Data... 4 3.2 Electrical
DC motors. G-motion. CTi Automation - Phone: Fax: Web:
G-motion No matter which drive solution you imagine, we make your dreams come true. True to our slogan (one stop shopping) we offer you a complete programme of electronic and mechanical drive systems which
SUMMARY. Contents. Chapter
SUMMARY Chapter Contents 1 General information...2 1.1 Symbols and units of measurement...2 1.2 Features of MP series...3 1.3 Versions...4 1.4 Selecting the gear unit...5 1.5 Service life of bearings...6
LARGE THREE-PHASE SQUIRREL CAGE ASYNCHRONOUS MOTORS FOR HEAVY DUTY APPLICATIONS ADH SERIES
LARGE THREE-PHASE SQUIRREL CAGE ASYNCHRONOUS MOTORS FOR HEAVY DUTY APPLICATIONS ADH SERIES FRAMES 355 560 355kW 1500kW (1500rpm) FOR INVERTER DUTY Code Declaration of conformity The motors described in
From 16 June 2011, motors placed for the first-time on the market shall have a minimum efficiency class of IE2.
INTRODUCTION New efficiency classes for the low-voltage three-phase motors (IE = International Efficiency). Along with the international discussion on energy efficiency a worldwide harmonized energy efficiency
AEEB AEVB LOW VOLTAGE SERIES Three-Phase Squirrel Cage Induction Motor Conforming to SS530 (Occasional Use) Conforming to IE1
AEEB AEVB LOW VOLTAGE SERIES Three-Phase Squirrel Cage Induction Motor Conforming to SS530 (Occasional Use) Conforming to IE1 STANDARD AND SPECIFICATION Performance: Meet the requirement of Singapore standard
Servo Drives and Motors Technical Data. High performance AC brushless servo motors and servo drives
Servo Drives and tors Technical Data High performance AC brushless servo motors and servo drives Emerson Solving your challenges Emerson - a legacy of performance Emerson is a diversified global manufacturing
The STH is a mid-range speed and torque gear reducer that
-SERIES The is a mid-range speed and torque gear reducer that sets a new standard for rotary positioning performance at an exceptional price point. A SHIMPO ABLE planetary gearbox is the interface between
Linear Actuator with Toothed Belt and Integrated Roller Guide Series OSP-E..BHD
inear Actuator with Toothed Belt and Integrated Roller Guide Series OSP-E..BHD Contents Description Data Sheet No. Page Overview 1.15.001E 11-14 Technical Data 1.15.002E-1 to 3 15-17 Dimensions 1.15.002E-4
ILE2K661PC1A1 brushless dc motor V- EtherNet/IP interface - L = 174 mm- 18:1
Characteristics brushless dc motor 24..48V- EtherNet/IP interface - L = 174 mm- 18:1 Main Range of product Product or component type Device short name Motor type Number of motor poles 6 Network number
Variable speed asynchronous motors with FCR brake LSMV FCR. General information
General information GENERAL USE : U.G. Closed three-phase asynchronous brake motors, LSMV series with failsafe continuous (dc) brake, according to IEC 3, 72, EN 50281. Single speed : 0.25 to 11, frame
High Performance: EPL Series
High Performance: EPL Series GAM can. If you don t see exactly what you need, let us know. We can modify the EPL Series gearboxes to meet your needs. Page 4 provides a list of commonly requested modifications
SIMODRIVE FT7 Synchronous Motors. Configuration Manual 03/2010 SIMODRIVE
SIMODRIVE 611 1FT7 Synchronous Motors Configuration Manual 03/2010 SIMODRIVE s Preface Description of the motors 1 Engineering 2 Mechanical properties of the motors 3 Configuration Manual Technical data
Temperature Sensor MBT 3270
Data Sheet Temperature Sensor MBT 327 Features Integrated plug OEM Temperature Sensor program Versions with integrated plug or cable available Various sensor elements available (RTD,, PTC) Robust, high
alpha Basic Line WORM GEARBOXES CVH / CVS
alpha WORM GEARBOXES CVH / CVS If the focus is on smooth running, smooth synchronization properties, and continuous operation, the V-Drive Basic is the right choice for you. 86 CVH Worm Gearboxes CVS 87
SMH High Torque Density
SMH High Torque Density AC Synchronous Servo Motor Catalogue Version:C Date: January, 207 Kinavo Servo Motor(Changzhou)Ltd. Tel.: +8-0-88037 Fax: +8-0-88072 Website: http://www.kinavo.com Add.: Building
PG ALP. Low cost Planetary Gearbox. Product Manual E-V0505.doc
PG ALP Low cost Planetary Gearbox Product Manual 05-01-06-E-V0505.doc Additional Supporting Documentation UL: 03-05-03 AC M2n - Product-Manual UL: 03-06-01 NX - Product-Manual UL: 03-01-02 AC R - Product-Manual
Product overview visit for more details
Product overview visit www.parvalux.com for more details DC brushless (PBL) DC permanent magnet (PM) AC induction (SD) motors only Type Code Shaft Orientation Power (Watts)* Speed (rpm) Torque (Nm)** Power
LSPXMV FCR Atmospheres containing explosive dust FCR asynchronous brake motors. General information
General information GENERAL USE : U.G. Enclosed three-phase brake asynchronous motors, LSPXMV series with failsafe brake, according to IEC 6003, 60072, EN 50281. Single speed : 0.25 to 11, frame size from
COMBISTOP NEW. Spring applied brakes
COMBISTOP NEW Spring applied brakes With manufacturing sites on three continents and a global sales network KEB ensures worldwide availability and support of the KEB COMBISTOP 38. This latest generation
BEVEL GEAR UNITS ZZ-SERVOLINE
BEVEL GEAR UNITS ZZ-SERVOLINE ZZ-SERVOLINE GEARBOX DESIGN AND FUNCTIONAL FEATURES Gear Ratios i= 3:1 i= 4:1 i= 5:1 i= 6:1 i= 8:1 i= 10:1 i= 12:1 i= 15:1 Spiral Bevel Gear KLINGELNBERG tooth system Hypoid
The statements in this data sheet are for information, only. They do not guarantee properties. We reserve the right to make changes without notice.
DMASS servo motor with high power denisty from 7.5KW up to 250KW Model DSM-95 Applications plastic machinery machine tools textile machinery logistics machinery press manufacture Special Features high
23 Synchronous servo motors EZ
23 Synchronous servo motors EZ 23.1 Overview Synchronous servo motors with single tooth winding Features High dynamics Short length Super compact due to tooth-coil winding method with the highest possible
HT hypoid bevel gear boxes
HT hypoid bevel gear boxes Solid and Hollow Shaft Design Cycloid gearboxes Planetary gearboxes evel gearboxes Planetary bevel gearboxes Hypoid gearboxes Gear technology Eppinger hypoid gear boxes The compact
Three-phase motors for marine use
Three-phase motors for marine use Contents Product description 11/2 Overview of technical data 11/7 Series K.../W4.. for Premium Efficiency IE3 11/8 Series K.../WE.. for High Efficiency IE2 11/12 Series