Torque motors to Nm. Description. Advantages. TMW series

Size: px
Start display at page:

Download "Torque motors to Nm. Description. Advantages. TMW series"

Transcription

1 Torque motors 200 to Nm Description Parker TMW torque motors are innovative direct drive solutions based on brushless technology. Especially designed for low speed operation, they advantageously replace traditional gearbox based systems in applications such as extruders and injection molding machines, as well as winders, mixers, crushers, presses, etc. Advantages High torque at low speed No gearbox High torque density Silent operation Customized mechanical Interface Integrated thrust bearing (option) Technical characteristics Motor type Permanent magnets synchronous motors Magnet material Nd-Fe-B Number of poles 24, 36 or 48 Type of construction IMB3, IMB4, IMB34 (EN ) Shaft heights 200 mm 35 mm 400 mm Degree of protection IP54 Rated voltage 400 VAC and 480 VAC up to 600 V Connections Terminal box for power cable, PTC probes and KTY sensors, connector for encoder signals Insulation of the Class F according to EN stator winding Thermal protection 2 PTC probes and KTY sensor Temperature range C Storage C Vibration severity Grade N Paint finish Black Variants and options Shaft end Bearings Encoder systems Terminal box orientation Extruder specific features Solid or hollow shaft with key or keyway, spline profile DIN 5480 and DIN Customized interfaces available on request Ball bearings Roller bearings (option) Absolute single turn Endat encoder Resolver At the rear on the top At the rear on the left or right side Integrated thrust bearing Screw extraction and cooling mechanisms Customized mechanical interface Autoryzowany dystrybutor Parker: Wrocław ul. Wyścigowa 38 tel fax w w w. a r a p n e u m a t i k. p l

2 Torque motors Applications and benefits Injection molding machines Advantages : Up to 30% energy savings : Contrary to hydraulic motors, electrical motors only consume energy when required. They also have better efficiencies. Allowing to reach up to 30% energy savings, as well as increased productivity, Parker TMW torque motors are the ideal replacement solution for hydraulic motors used to drive plasticization units on injection moulding machines. Especially designed to deliver high torques at low speeds with no gearbox, TMW torque motors allow for fast and easy replacement of hydraulic motors from Parker MR series, thanks to compatible mechanical interfaces. Extruders Increased productivity : Thanks to electrical motors, plasticization can be done in parallel with other operations, such as injection, clamping and ejection, which is not feasible with* hydraulic solutions. Advantages : Maintenance savings : No gearbox means no more maintenance associated to it. Furthermore, as a brushless motor, the torque motor itself does not require any maintenance. Energy savings : In high power continuous process applications, the use of torque motors generates significant energy savings thanks to the suppression of mechanical losses of the gearbox. Reduced footprint Parker torque motors are the perfect alternative to direct current or induction motors associated with gearboxes on extruders applications. Result of a close cooperation with machine builders and end-users, Parker torque motors are available with various dedicated options for extruders applications, such as : integrated thrust bearing to support back pressure from the screw, specific mechanisms allowing for quick and easy removal of the screw from the motor Simplified installation Silent operation and reduced vibrations 54

3 Torque motors TMW codification Torque motors TMW Product code example T M W L X C 2 0 U F R PRODUCT SERIES TM : Torque motors T M COOLING METHOD Water cooling (standard) Natural ventilation (available with derating, consult us) W A SHAFT HEIGHT 200 mm 35 mm 400 mm TORQUE/SPEED CHARACTERISTICS (see motors data tables) FEEDBACK SENSOR Endat Encoder (standard) Direct Endat encoder with hollow shaft Resolver (on request) C B A THRUST BEARINGS Ball bearings Roller bearings Thrust bearing (SKF 294 ) TERMINAL BOX Upper rear (standard) At the rear on the right side (front view) At the rear on the left side (front view) U R L EXTRUDER SCREW EXTRACTION/COOLING Frontside extruder screw extraction Frontside extruder screw extraction, screw cooling possibility Backside extruder screw extraction, screw cooling possibility (consult us) No screw extraction, no screw cooling possibility F P R Z SHAFT TYPE Hollow shaft with keyway (standard) Hollow shaft with spline profile (DIN 5480) Hollow shaft with spline profile (DIN 5463) Solid shaft with spline profile (DIN 5480) Solid shaft with spline profile (DIN 5463) Solidl shaft, smooth Solid shaft, with keyway Special shaft (consult us) MECHANICAL INTERFACE (see motors data tables) 55

4 Torque motors Product code 400 VAC power supply () rpm Pn (kw) Nn Mn In (Arms) Nmax Mmax (2) Inertia (kgm²) Water flow rate (l/min) Drive reference (2) T M W L U , SD E T M W L V , SD E T M W L V , SD-43380F T M W L W , SD-43326G T M W 4 0 A L W , SD G T M W 4 0 C L W , SD-43336G T M W 4 0 C L S , SD H rpm T M W L R , SD E T M W L T , SD E T M W L U , SD-43345F T M W 3 0 A L U , SD-43380F T M W 3 0 A L S , SD-43326G T M W L S , SD G T M W L S , SD-43336G T M W L P , SD-43336G T M W 4 0 A L Q , SD-43336G T M W 4 0 C L K , SD H rpm T M W L U , SD D T M W L T ,78 890SD D T M W L U , SD E T M W L Q , SD E T M W L S , SD-43305F T M W L R , SD-43345F T M W L Q , SD-43380F T M W 3 0 A L Q , SD G T M W L P , SD-43336G T M W 4 0 A L M , SD H T M W 4 0 A L K , SD J T M W 4 0 C L I , SD/4/0685K () Other speeds available, consult us. (2) This reference corresponds to the optimum drive for operation at the nominal point of the motor, without overload. Warning : this drive does not allow to reach the maximum torque of the motor, and has to be adapted regarding the application requirements 56

5 Torque motors Product code 400 VAC power supply () rpm T M W L S T M W L T T M W L P T M W L N T M W L J T M W L L ,00,03 4,40 6,50 6,20 9, SD E 890SD E 890SD-43305F 890SD-43326G 890SD-43336G 890SD H T M W 4 0 A L H , SD/4/0685K T M W 4 0 C L G , SD/4/0798K rpm T M W L R T M W L R T M W L R T M W L N T M W L N T M W L M T M W 3 0 A L N T M W L I T M W L J ,75 0,8,00 4,40 4,55 6,50 6,80 6,20 9, SD D 890SD E 890SD E 890SD-43345F 890SD-43380F 890SD G 890SD-43336G 890SD H 890SD H T M W 4 0 A L E , SD/4/0798K rpm T M W L Q T M W L Q T M W L M T M W L L T M W L K ,8,03 3,45 4,55 6, SD E 890SD-43305F 890SD-43305F 890SD-43326G 890SD-43336G T M W 3 0 A L L , SD-43336G T M W L H T M W L F rpm T M W L Q T M W L N T M W L P T M W L L T M W L K T M W L I T M W L H T M W 3 0 A L J T M W 3 0 A L H Pn (kw) Nn Mn In (Arms) Nmax Mmax (2) Inertia (kgm²) 6,20 9,40 0,78,00,03 3,45 4,40 4,55 6,50 6,80 6,80 Water flow rate (l/min) Drive reference (2) 890SD H 890SD/4/0685K 890SD E 890SD-43305F 890SD-43345F 890SD-43345F 890SD-43380F 890SD G 890SD-43336G 890SD H 890SD H T M W L G , SD H () Other speeds available, consult us. (2) This reference corresponds to the optimum drive for operation at the nominal point of the motor, without overload. Warning : this drive does not allow to reach the maximum torque of the motor, and has to be adapted regarding the application requirements 57

6 Torque motors Product code 400 VAC power supply () rpm Pn (kw) Nn Mn In (Arms) Nmax Mmax (2) Inertia (kgm²) Water flow rate (l/min) Drive reference (2) T M W L P , SD E T M W L P ,78 890SD E T M W L M , SD-43305F T M W L M , SD-43345F T M W L H , SD-43380F T M W L H , SD-43326G T M W L F , SD G T M W L G , SD H rpm T M W L M , SD E T M W L L , SD-43345F T M W L L , SD-43380F T M W L G ,55, SD-43336G T M W L F , SD-43336G rpm T M W L L ,78 890SD-43305F T M W L K ,78 890SD-43345F T M W L J , SD-43380F T M W L J , SD-43380F T M W L I , SD-43326G T M W L J , SD-43326G T M W L H , SD G T M W L E , SD-43326G T M W L C , SD G T M W L C , SD-43336G () Other speeds available, consult us. (2) This reference corresponds to the optimum drive for operation at the nominal point of the motor, without overload. Warning : this drive does not allow to reach the maximum torque of the motor, and has to be adapted regarding the application requirements 58

7 Torque motors Product code 480 VAC power supply () Pn (kw) Nn Mn In (Arms) Nmax Mmax (2) Inertia (kgm²) Water flow rate (l/min) Drive reference (2) rpm T M W L W , SD-43326G T M W 4 0 A L W , SD G T M W 4 0 C L W , SD-43336G rpm T M W L U , SD E T M W L V , SD E T M W 3 0 A L U , SD-43326G T M W L V , SD-43326G T M W 4 0 A L Q , SD-43336G T M W 4 0 C L S , SD H rpm T M W L R , SD E T M W L T , SD E T M W L U , SD-43356F T M W 3 0 A L S , SD-43326G T M W L S , SD G T M W L S , SD-43336G T M W L P , SD-43336G T M W 4 0 C L K , SD H rpm T M W L U , SD D T M W L U , SD E T M W L Q , SD E T M W L S , SD-43345F T M W L Q , SD-43326G T M W 3 0 A L Q , SD G T M W 4 0 A L M , SD H T M W 4 0 A L K , SD J T M W 4 0 C L I , SD/4/0685K () Other speeds available, consult us. (2) This reference corresponds to the optimum drive for operation at the nominal point of the motor, without overload. Warning : this drive does not allow to reach the maximum torque of the motor, and has to be adapted regarding the application requirements 59

8 Torque motors Product code 480 VAC power supply () Pn (kw) Nn Mn In (Arms) Nmax Mmax (2) Inertia (kgm²) Water flow rate (l/min) Drive reference (2) rpm T M W L T ,78 890SD D T M W L S , SD E T M W L T , SD E T M W L P , SD-43345F T M W L R , SD-43345F T M W L N , SD-43326G T M W L P , SD-43336G T M W L L , SD H T M W 4 0 A L H , SD/4/0685K T M W 4 0 C L G , SD/4/0798K rpm T M W L N , SD-43326G T M W 3 0 A L N , SD-43336G T M W L J , SD-43336G T M W L J , SD H rpm T M W L R , SD D T M W L R , SD E T M W L R , SD E T M W L M , SD-43345F T M W L N , SD-43356F T M W L M , SD G T M W 3 0 A L L , SD-43336G T M W L I , SD H T M W 4 0 A L E , SD/4/0798K rpm T M W L Q , SD E T M W L Q , SD-43345F T M W L L , SD-43326G T M W L K , SD-43336G T M W L H , SD H T M W L F , SD/4/0685K () Other speeds available, consult us. (2) This reference corresponds to the optimum drive for operation at the nominal point of the motor, without overload. Warning : this drive does not allow to reach the maximum torque of the motor, and has to be adapted regarding the application requirements 60

9 Torque motors Product code 480 VAC power supply () Pn (kw) Nn Mn In (Arms) Nmax Mmax (2) Inertia (kgm²) Water flow rate (l/min) Drive reference (2) rpm T M W L Q ,78 890SD E T M W L P , SD-43345F T M W L L , SD-43345F T M W L K , SD-43326G T M W L I , SD G T M W L H , SD-43336G T M W 3 0 A L J , SD H T M W 3 0 A L H , SD H T M W L G , SD H rpm T M W L P , SD E T M W L P ,78 890SD E T M W L N , SD-43345F T M W L H , SD-43326G T M W L G , SD H rpm T M W L M , SD-43345F T M W L M , SD-43356F T M W L L , SD-43326G T M W L H , SD-43326G T M W L F , SD G T M W L G , SD-43336G T M W L F , SD-43336G rpm T M W L M , SD E T M W L L ,78 890SD-43345F T M W L L , SD-43356F T M W L J , SD-43326G T M W L J , SD-43326G T M W L E , SD-43326G rpm T M W L K ,78 890SD-43345F T M W L J , SD-43326G T M W L I , SD-43326G T M W L H , SD G T M W L C , SD G T M W L C , SD-43336G () Other speeds available, consult us. (2) This reference corresponds to the optimum drive for operation at the nominal point of the motor, without overload. Warning : this drive does not allow to reach the maximum torque of the motor, and has to be adapted regarding the application requirements 6

10 Torque motors Dimensions and drawings TMW200 with solid shaft L L2 L3 D Ball bearings Roller bearings Ball bearings Roller bearings Mechanical interface R7002 R700 R7002 R700 T M W m6 95 m6 335 T M W m6 95 m6 350 T M W m6 95 m6 365 T M W m6 96 m6 405 T M W m6 95 m6 420 TMW300 with solid shaft D2 Weight L L2 L3 D Ball bearings Roller bearings Ball bearings Roller bearings Mechanical interface R7004 R7003 R7004 R7003 T M W m6 20 m6 55 T M W m6 20 m6 575 T M W m6 20 m6 595 T M W m6 20 m6 70 T M W 3 0 A m6 20 m6 750 D2 Weight 62

11 Torque motors Dimensions and drawings TMW400 with solid shaft L L2 L3 D Ball bearings Roller bearings Ball bearings Roller bearings Mechanical interface R7006 R7005 R7006 R7005 D2 Weight T M W m6 60 m6 290 T M W m6 60 m6 430 T M W 4 0 A m6 60 m6 620 T M W 4 0 C m6 60 m

12 Torque motors Dimensions and drawings TMW200 with thrust-bearing T M W T M W T M W T M W T M W Mechanical interface Thrust bearing L L2 L3 L4 L0 Mini D D2 D3 D4 D7 Weight R H h R H h R H h R H h R H h R H h R H h R H h R H h R H h

13 Torque motors Dimensions and drawings TMW300 with thrust-bearing T M W T M W T M W T M W T M W 3 0 A Mechanical interface Thrust bearing L L2 L3 L4 L0 Mini D D2 D3 D4 D7 Weight R H H R H H R H H R H H R H H R H H R H H R H H R H H R H H R H H R H H R H H R H H R H H

14 Torque motors Dimensions and drawings TMW400 with thrust-bearing T M W T M W T M W 4 0 A T M W 4 0 C Mechanical interface Thrust bearing L L2 L3 L4 L0 Mini D D2 D3 D4 D7 Weight R H H R H H R H H R H H R H H R H H R H H R H H R H H R H H R H H R H H

15 Cables and accessories - torque motors Cables for TMW 890 Feedback cable Description CS4UVF3R0005(*) Endat encoder cable with connectors - 2pts, length = 5m Cables for TMW COMPAX3 Feedback cable Description CC3UVF3R0005(*) Endat encoder cable with connectors - 2pts, length = 5m *) the 3 last digits indicate cable length in meters ± 5%max For non-standard length cable with length different from : / 2 / 3 / 4 / 5 / 0 / 5 / 20 / 25 / 30 / 40 / 50m please contact us. Example CDUPFR005 : power cable, length = 5 m. 5 Autoryzowany dystrybutor Parker: Wrocław ul. Wyścigowa 38 tel fax w w w. a r a p n e u m a t i k. p l

Torque Motors for Extruders

Torque Motors for Extruders Torque Motors for Extruders Solutions for the plastics industry An innovative solution for extruders An advantageous direct drive alternative to costly gearbox based systems in extruders applications Parker

More information

TMW Series. Torque Motors.

TMW Series. Torque Motors. TMW Series Torque Motors www.runcheng.net WARNING USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND

More information

water-cooled motor / generator with up to 13 kw continuous power

water-cooled motor / generator with up to 13 kw continuous power water-cooled motor / generator with up to 13 kw continuous power KEY FEATURES permanent magnet synchronous machine water-cooled high peak power for motor applications convincing cost-benefit ratio recommended

More information

Servomotors. AC brushless servomotors TGT a TGH

Servomotors. AC brushless servomotors TGT a TGH Servomotors AC brushless servomotors TGT a TGH AC brushless servomotors TGT The TGT series AC synchronous servomotors are characterized by: low inertia, small dimensions, high dynamics, high adaptability

More information

1 Article designation

1 Article designation Order code LTi synchronous motors LSx Example LSH07410560 1 Article designation LS LTi synchronous motor series T or H 074 1 0 560 / T H Edge measurement of motor in mm (not the flange measurement) 050

More information

1 Article designation

1 Article designation Order code LTi synchronous motors LSx Example LSH07410560 1 Article designation LS LTi synchronous motor series T or H 074 1 0 560 / T H Edge measurement of motor in mm (not the flange measurement) 050

More information

DC motors. G-motion. CTi Automation - Phone: Fax: Web:

DC motors. G-motion. CTi Automation - Phone: Fax: Web: G-motion No matter which drive solution you imagine, we make your dreams come true. True to our slogan (one stop shopping) we offer you a complete programme of electronic and mechanical drive systems which

More information

Rotary Direct Drive Motor Cartridge DDR

Rotary Direct Drive Motor Cartridge DDR www.danahermotion.net Rotary Direct Drive Motor Cartridge DDR Driven by Edition 04.2004 english DDR (Direct Drive Rotary) What is direct drive? Very simply it is the direct coupling of a torque motor to

More information

DYNASYN Hightorque-Servomotors DT Dynamic. Compact. Powerful.

DYNASYN Hightorque-Servomotors DT Dynamic. Compact. Powerful. DYNASYN Hightorque-Servomotors DT Dynamic. Compact. Powerful. Top-class dynamic response: DT compact high-torque motors The DYNASYN DT series of high-torque motors meets the highest requirements made by

More information

BTD - BCR. Synchronous Servomotors PRODUCT

BTD - BCR. Synchronous Servomotors PRODUCT BTD - BCR Synchronous Servomotors PRODUCT Bonfiglioli, one name for a large international group. It was back in 1956 that Clementino Bonfiglioli established in Bologna, Italy, the company that still bears

More information

BMD. Permanent Magnet AC Synchronous Motors

BMD. Permanent Magnet AC Synchronous Motors BMD Permanent Magnet AC Synchronous Motors Power, control and green solutions About us 3 Bonfiglioli, one name for a large international group. It was back in 1956 that Clementino Bonfiglioli established

More information

INTRODUCTION L-CAGS-E-170. Elevated output

INTRODUCTION L-CAGS-E-170. Elevated output GESAl t er nat or s f orsmal lsi zewi nd andhydr aul i ctur bi nes INTRODUCTION SYSTEM OVERVIEW The series of Moog alternators, direct drive or multiplier, is designed to meet the application requirements

More information

The statements in this data sheet are for information, only. They do not guarantee properties. We reserve the right to make changes without notice.

The statements in this data sheet are for information, only. They do not guarantee properties. We reserve the right to make changes without notice. DMASS servo motor with high power denisty from 7.5KW up to 250KW Model DSM-95 Applications plastic machinery machine tools textile machinery logistics machinery press manufacture Special Features high

More information

BRUSHLESS NX to 64N.m 230V AND 400V POWER SUPPLY MOTION QUALITY AND HIGH DYNAMIC CHARACTERISTICS

BRUSHLESS NX to 64N.m 230V AND 400V POWER SUPPLY MOTION QUALITY AND HIGH DYNAMIC CHARACTERISTICS SERVO MOTORS 14 BRUSHLESS NX 0.45 to 64N.m The NX series is the new brushless servo motor range. The NX series brushless servo motors are characterized by a 10-pole innovative design for highest quality

More information

SINUS PENTA 2T/4T SINUS PENTA 2T/4T

SINUS PENTA 2T/4T SINUS PENTA 2T/4T SINUS PENTA 2T/4T SINUS PENTA 2T/4T Technical Highlights One product, 5 integrated functions - IFD (Inverter Frequency Drive): vector modulation function for general-purpose applications (V/F pattern).

More information

Asynchronous motors. 7/2 Main spindle motors for SIMODRIVE 611 7/2 Introduction

Asynchronous motors. 7/2 Main spindle motors for SIMODRIVE 611 7/2 Introduction / Main spindle motors for SIMODRIVE 611 / Introduction /4 Main spindle motors for SIMODRIVE 611 1PH motors with solid shaft/forced ventilation /18 Main spindle motors for SIMODRIVE 611 1PH4 motors with

More information

BMD. Permanent Magnet AC Synchronous Motors

BMD. Permanent Magnet AC Synchronous Motors BMD Permanent Magnet AC Synchronous Motors Power, control and green solutions About us 3 Bonfiglioli, one name for a large international group. It was back in 1956 that Clementino Bonfiglioli established

More information

Datasheet. Pitch Motor PMSM SP260B8

Datasheet. Pitch Motor PMSM SP260B8 Pitch Motor PMSM SP260B8 Permanent Magnet Compact and light weight High peak torque Excellent efficiency Maintenance free, No fan 5 year warranty Document no.: 4121260012a 1 Application The Pitch motor

More information

Datasheet. Pitch Motor PMSM SP190C8

Datasheet. Pitch Motor PMSM SP190C8 Pitch Motor PMSM SP190C8 Permanent Magnet Compact and light weight High peak torque Excellent efficiency Maintenance free, No fan 5 year warranty Document no.: 4121260007a 1 Application The Pitch motor

More information

SIMOTICS S-1FT7 Servomotors. The Compact Servomotors for High-Performance Motion Control Applications. Motors. Edition April 2017.

SIMOTICS S-1FT7 Servomotors. The Compact Servomotors for High-Performance Motion Control Applications. Motors. Edition April 2017. Motors SIMOTICS S-1FT7 Servomotors The Compact Servomotors for High-Performance Motion Control Applications Brochure Edition April 2017 siemens.com/servomotors The Servomotors for High-Performance Applications

More information

Datasheet. Pitch Motor PMSM SP190F8

Datasheet. Pitch Motor PMSM SP190F8 Pitch Motor PMSM SP190F8 Permanent Magnet Compact and light weight High peak torque Excellent efficiency Maintenance free, No fan 5 year warranty Document no.: 4121260009c 1 Application The Pitch motor

More information

DYNEO VARIABLE SPEED DRIVES Unidrive SP variable speed drives LSRPM - PLSRPM permanent magnet synchronous motors

DYNEO VARIABLE SPEED DRIVES Unidrive SP variable speed drives LSRPM - PLSRPM permanent magnet synchronous motors Unidrive SP variable speed drives LSRPM - PLSRPM permanent magnet 0.75 kw to 400 kw Technical catalogue 4936 en - 2012.10 / b Rectifier Simplicity Performance Install and start using your system quickly

More information

Servomotors and Drive Systems. Fastact H Series and Dx2020 Systems Guide

Servomotors and Drive Systems. Fastact H Series and Dx2020 Systems Guide Fastact H Series and Dx2020 Systems Guide Fastact H Series Servomotors Matched With Dx2020 Drives The Moog Fastact H is a product line of DC permanent magnet servomotors that cover a broad range of torques

More information

Brushless Servo Motors

Brushless Servo Motors Quantum QB56 Series Housed Brushless Servo Motors NEMA Size 56 High Power Density, Sinusoidal BEMF Allied Motion s Quantum (QB) housed brushless servo motors are designed for use in precision servo applications

More information

AKM2GTM Servo Motors. The Next Generation of Servo Motors Offering Industry Leading Performance with a Compact Footprint

AKM2GTM Servo Motors. The Next Generation of Servo Motors Offering Industry Leading Performance with a Compact Footprint AKM2GTM Servo Motors The Next Generation of Servo Motors Offering Industry Leading Performance with a Compact Footprint Kollmorgen. Every solution comes from a real understanding of the challenges facing

More information

AMxxxx Synchronous Servomotors

AMxxxx Synchronous Servomotors AMxxxx Synchronous Servomotors One Cable Technology (OCT) for power and feedback with absolute encoder Backlash-free permanent magnet holding brake Rotatable speedtec plug Modular design Greatest possible

More information

AC Synchronous Reluctance motors

AC Synchronous Reluctance motors AC Synchronous Reluctance motors AC Synchronous Reluctance Motors Invented many years ago but developed for production in series only recently the Synchronous reluctance motors combine the advantage of

More information

Momentum. Technologies GmbH IE 4. oil-less. MTS113 MTS114 Synchronous Drum Motor. Partner Company. Efficiency. Momentum MTS113 MTS US

Momentum. Technologies GmbH IE 4. oil-less. MTS113 MTS114 Synchronous Drum Motor. Partner Company. Efficiency. Momentum MTS113 MTS US MTS113 MTS114 Synchronous Drum Motor oil-less Partner Company MTS113 MTS114-201701-01-US Efficiency IE 4 MTS113 MTS114 Synchronous Drum Motor Characteristics Nominal Diameter (in) 4.45 oil-free (no leakage)

More information

LSRPM - UNIDRIVE SP Synchronous motors with permanent magnets-drive 0.75 to 400 kw

LSRPM - UNIDRIVE SP Synchronous motors with permanent magnets-drive 0.75 to 400 kw 4176 en - 0.08 / a Permanent Magnet Solutions LSRPM - UNIDRIVE SP Synchronous motors with permanent magnets-drive 0.75 to 400 kw Selection guide A modular offer LS SOFT Software + cables RS485 or USB/RS22

More information

DYNASYN DD servo motors. Dynamic. Compact. Energy-efficient.

DYNASYN DD servo motors. Dynamic. Compact. Energy-efficient. DYNASYN DD servo motors. Dynamic. Compact. Energy-efficient. B E N E F I T S Maximum dynamic response Increased energy efficiency High cost effectiveness Long service life Single-cable solution 2 DYNASYN

More information

8JS three-phase synchronous motors Dynamic precision drives

8JS three-phase synchronous motors Dynamic precision drives Dynamic precision drives Modern machine concepts demand compact and powerful motors. The compact AC servo motor series from B&R provides ways for the machine manufacturer to further optimize service and

More information

Brushless servo motors as replacements for conventional disk armature motors

Brushless servo motors as replacements for conventional disk armature motors MC 17-Bl MC 23-Bl Brushless servo motors as replacements for conventional disk armature motors 1 MOTOR TECHNOLOGY LTD MOTEC HOUSE, CHADKIRK BUSINESS PARK, STOCKPORT, CHESHIRE SK6 3NE ENGLAND TEL: +44 (0)161

More information

SIMOTICS Frei verwendbar / Siemens AG Alle Rechte vorbehalten.

SIMOTICS Frei verwendbar / Siemens AG Alle Rechte vorbehalten. The most comprehensive range of motors SIMOTICS SIMOTICS portfolio Motors SIMOTICS Low voltage motors for line and inverter operation Motors for motion control application DC motors High-voltage Motors

More information

Torque motors. (frameless) TGQ Torque (direct) motors

Torque motors. (frameless) TGQ Torque (direct) motors Torque motors (frameless) TGQ Torque (direct) motors Production and delivery of servodrives and control systems. The Czech company TG Drives offers servodrives since 1995 for machines and equipments in

More information

Asynchronous motors. 5 Asynchronous motors 5/2 Type overview and rated data 5/4 Technical definitions 5/4 Encoder systems

Asynchronous motors. 5 Asynchronous motors 5/2 Type overview and rated data 5/4 Technical definitions 5/4 Encoder systems / Type overview and rated data /4 Technical definitions /4 Encoder systems / PH7 motors / PH7 motors, forced ventilation / Permissible combinations of mechanical designs for PH7 motors, shaft 8 /4 PL motors

More information

Technical Guide No. 7. Dimensioning of a Drive system

Technical Guide No. 7. Dimensioning of a Drive system Technical Guide No. 7 Dimensioning of a Drive system 2 Technical Guide No.7 - Dimensioning of a Drive system Contents 1. Introduction... 5 2. Drive system... 6 3. General description of a dimensioning

More information

Planning and Commissioning Guideline for NORD IE4 Synchronous Motors with NORD Frequency Inverters

Planning and Commissioning Guideline for NORD IE4 Synchronous Motors with NORD Frequency Inverters Getriebebau NORD GmbH & Co. KG Getriebebau-Nord-Straße 1 22941 Bargteheide, Germany www.nord.com Planning and Commissioning Guideline for NORD IE4 Synchronous Motors with NORD Frequency Inverters General

More information

ASM. Asynchronous Spindle. SEM Limited Faraday Way Orpington, Kent BR5 3QT United Kingdom

ASM. Asynchronous Spindle. SEM Limited Faraday Way Orpington, Kent BR5 3QT United Kingdom NE ASM Asynchronous Spindle Motors SEM Limited Faraday Way Orpington, Kent BR 3QT United Kingdom Tel: +44 ()1689 8847 Fax: +44 ()1689 884884 Email: sales@sem.co.uk Web: www.sem.co.uk Version 2.1 June 211

More information

Momentum. Technologies GmbH IE 4. oil-less. MTS82 Synchronous Drum Motor. Partner Company. Efficiency. Momentum MTS US

Momentum. Technologies GmbH IE 4. oil-less. MTS82 Synchronous Drum Motor. Partner Company. Efficiency. Momentum MTS US MTS82 Synchronous Drum Motor oil-less Partner Company MTS82-201704-01-US Efficiency IE 4 MTS82 Synchronous Drum Motor Characteristics Nominal Diameter (in) 3.21 oil-free (no leakage) Nominal Power (HP)

More information

Standard Street, El Segundo CA BRUSHLESS SERVO MOTORS

Standard Street, El Segundo CA BRUSHLESS SERVO MOTORS BRUSHLESS SERVO MOTORS To accommodate your complete servo system requirements, Glentek manufactures four complete series (GMB, GMBF, GMBM and GMBN) of high performance, permanent magnet brushless servo

More information

premo servo actuators

premo servo actuators servo actuators 20 21 the powerful servo actuator platform Absolute precision meets perfect motion: combines precision with motion more efficiently than ever. The central idea behind the first fully scalable

More information

Motion Solutions AC Induction Permanent Magnet DC Brushless DC

Motion Solutions AC Induction Permanent Magnet DC Brushless DC Motion Solutions AC Induction Permanent Magnet DC Brushless DC Gearmotors Motors Controls bodine-electric.com Your Partner for Engineered Solutions and Optimized Delivery Programs 3D Modeling and Prototyping

More information

Unimotor fm 230 V 460 V Unimotor fm 230 V / 460 V

Unimotor fm 230 V 460 V Unimotor fm 230 V / 460 V Unimotor fm 230 V 460 V Unimotor fm 230 V / 460 V Flexible Configuration C Servo Motors Flexible Configuration C Servo Motors Unimotor fm is a high performance, brushless C Servo motor range matched for

More information

Synchronous motors. Main spindle motors for SINAMICS S120 1FE1 standard type built-in motors Water cooling. 6/86 Siemens NC /2008

Synchronous motors. Main spindle motors for SINAMICS S120 1FE1 standard type built-in motors Water cooling. 6/86 Siemens NC /2008 Synchronous motors Main spindle motors for SINAMICS S2 FE standard type built-in motors Siemens AG 27 Overview Benefits (continued) 7 Compatible system of SINUMERIK, SINAMICS and motor, therefore fast

More information

AC motors. 3/2 Overview

AC motors. 3/2 Overview / Overview / synchronous (induction) motors / forced-ventilated, degree of protection IP / PL motors forced-ventilated, degree of protection IP /4 Selection guides /4 dditional data for PH7 and PL motors

More information

CMG Compact Motor Gear

CMG Compact Motor Gear INNOVATIVE DRIVE TECHNOLOGY CMG Compact Motor Gear Model range CMG 05 - CMG 601 for torques from 500 Nm to 150,000 Nm Model range CMG 05 - CMG 601 CMG Compact Motor Gear Originally designed for driving

More information

Liquid-cooled motors Impressive benefits

Liquid-cooled motors Impressive benefits Liquid-cooled motors Impressive benefits SERVAX Always in motion Swiss Family business with proven international success. Our industrial products are in use all over the world. The formular for success

More information

M4-295X DC Servomotors Direct Replacement of SEM MT30 * motors

M4-295X DC Servomotors Direct Replacement of SEM MT30 * motors M-95X DC Servomotors Direct Replacement of SEM MT3 * motors Identical motor shaft and mount dimensions (IEC & NEMA options) Matched motor windings Compatible torque/speed performance Matched connection

More information

General Purpose Servo Motors

General Purpose Servo Motors General Purpose Servo Motors losing the price-performance gap between induction motors and high-end servo motors, MT servo motors are particularly suitable for price sensitive motion applications that

More information

Servo Motors. Unimotor hd, Unimotor fm, NT Series and XV Series lb-in ( Nm) 230 V 460 V

Servo Motors. Unimotor hd, Unimotor fm, NT Series and XV Series lb-in ( Nm) 230 V 460 V Servo Motors Unimotor hd, Unimotor fm, NT Series and XV Series 0.9-1204 lb-in (0.11-136 Nm) 230 V 460 V Contents Introduction: A Servo Motor for Every Application... 1 Drive and Motor Selection... 3 Electronic

More information

Variable speed asynchronous motors with FCR brake LSMV FCR. General information

Variable speed asynchronous motors with FCR brake LSMV FCR. General information General information GENERAL USE : U.G. Closed three-phase asynchronous brake motors, LSMV series with failsafe continuous (dc) brake, according to IEC 3, 72, EN 50281. Single speed : 0.25 to 11, frame

More information

Table of contents. Three-phase asynchronous motors DA

Table of contents. Three-phase asynchronous motors DA be in motion be in motion AC Asynchronous Motors DA 100-280 Table of contents 1. Three-phase asynchronous motor DA 100-280... 3 1.1. General technical data... 3 1.2. Ratings definition for ventilated

More information

SKA DDR SKA DDR SKA DDR SKA DDR SKA DDR SKA DDR

SKA DDR SKA DDR SKA DDR SKA DDR SKA DDR SKA DDR 430 RATINGS AND SPECIFICATIONS POLES 56 THERMAL PROTECTION PT 1000 430.30.210.52 430.30.210.53 430.30.210.54 430.30.210.55 430.30.210.56 Stall torque Nm 210 210 210 210 210 Peak torque Nm 458 458 458 436

More information

Unidrive M700 Class leading performance with onboard real-time Ethernet

Unidrive M700 Class leading performance with onboard real-time Ethernet Unidrive M Class leading performance with onboard real-time Ethernet. kw -.8 MW Heavy Duty (. hp -, hp) V V V 9 V Unidrive M features Easy click-in keypad connection Range of multi-language LCD keypads

More information

Open continuous current (DC) motors MS 1 - MS 2. General information

Open continuous current (DC) motors MS 1 - MS 2. General information MS 1 - MS 2 General information Open continuous current (dc) motors conforming to the IEC specifications. MS 1 : - frame size 80 to 132 mm, - power 0.44 to 8.85 kw. MS 2 : - frame size 112 and 132 mm,

More information

Linear Motors & Servo Drives 3x400VAC. Linear Motor Series P The linear motor technology for industrial applications. Peak force up to 2 500N

Linear Motors & Servo Drives 3x400VAC. Linear Motor Series P The linear motor technology for industrial applications. Peak force up to 2 500N Linear Motors & Servo Drives 3x400VAC Linear Motor Series P10- Peak force up to 2 500N Velocity up to 5m/s Acceleration up to 100g Free positioning Long life: Linear direct drive The linear motor technology

More information

DSM5. Brushless Servomotors User manual

DSM5. Brushless Servomotors User manual DSM5 Brushless Servomotors User manual page 1 1 General information 1.1 About this manual... 3 1.2 Target group... 3 1.3 Symbols used... 3 2 Safety 2.1 Safety notes... 3 2.2 Use as directed... 4 2.3 Prohibited

More information

Servomotors. EX Series

Servomotors. EX Series Servomotors EX Series Technical Manual PVD 3665 - EX 1 PVD3665_GB_EX_July 2016.Docx 2 PVD3665_GB_EX_July 2016.Docx 3 PVD3665_GB_EX_July 2016.Docx Compliance with «UL» standards 4 PVD3665_GB_EX_July 2016.Docx

More information

Powerdrive FX Ultra compact regenerative drive solution

Powerdrive FX Ultra compact regenerative drive solution Powerdrive FX Ultra compact regenerative drive solution 22 kw - 90 kw (30 hp - 125 hp) 400 V 480 V Powerdrive FX Drives with dynamic braking Based on innovative C-Light 4 Quadrant technology, the variable

More information

SPINDASYN Hollow shaft motors. With integrated heavy duty bearing.

SPINDASYN Hollow shaft motors. With integrated heavy duty bearing. SPINDASYN Hollow shaft motors. With integrated heavy duty bearing. Hollow shaft motors with integrated axial bearing for high forces: SPINDASYN For applications requiring high forces and extremely accurate

More information

Asynchronous and synchronous motors for SINAMICS S120 1PL6 asynchronous motors Forced ventilation, IP23 degree of protection

Asynchronous and synchronous motors for SINAMICS S120 1PL6 asynchronous motors Forced ventilation, IP23 degree of protection Overview 1PL6 motors, shaft heights 180 to 22 Benefits 7 Extremely high power density with small motor dimensions (0 to 60 % higher output as compared to 1PH7 in degree of protection IP) 7 Speed down to

More information

KeDrive DMS2 Synchronous Motors

KeDrive DMS2 Synchronous Motors KeDrive DMS2 Synchronous Motors KeDrive DMS2 Synchronous Motors The synchronous servomotors are suitable for almost all servo applications in automation. The high torque density permits a particularly

More information

CPLS Asynchronous motors for variable frequency. 95 Nm to 2900 Nm

CPLS Asynchronous motors for variable frequency. 95 Nm to 2900 Nm 95 Nm to 2900 Nm Introduction The range of IP23 protection CPLS asynchronous motors was designed for fixed and variable speed applications when there is little space available or (and) there is a wide

More information

PAS Series AC Servo Motor. Datasheet

PAS Series AC Servo Motor. Datasheet PAS Series AC Servo Motor Datasheet Version PAS 2013 01 http://www.primopal.com Description PrimoPal offers a wide selection of high performance brushless AC servo motors, with power ratings from 200 W

More information

Small step, big impact: Energy efficiency and dynamic performance

Small step, big impact: Energy efficiency and dynamic performance Small step, big impact: Energy efficiency and dynamic performance The innovative synchronous-reluctance drive system with SIMOTICS motors and SINAMICS converters A new dimension of efficiency siemens.com/reluctance-drive-system

More information

SLM/SLG SERIES. SLM Series Motors/SLG Series Gearmotors BRUSHLESS AC OR DC SERVO MOTOR / INTEGRATED SERVO GEARMOTOR

SLM/SLG SERIES. SLM Series Motors/SLG Series Gearmotors BRUSHLESS AC OR DC SERVO MOTOR / INTEGRATED SERVO GEARMOTOR SLM Series Motors/SLG Series Gearmotors SLM/SLG SERIES BRUSHLESS AC OR DC SERVO MOTOR / INTEGRATED SERVO GEARMOTOR Compatible with virtually any manufacturer s servo drive Multiple frame size options 952.5.62

More information

M4-295X DC Servomotors Direct Replacement of SEM MT30

M4-295X DC Servomotors Direct Replacement of SEM MT30 M-95X DC Servomotors Direct Replacement of SEM MT3 * motors Identical motor shaft and mount dimensions (IEC & NEMA options) Matched motor windings Compatible torque/speed performance Matched connection

More information

PLS Open Drip Proof three-phase asynchronous motors. General information

PLS Open Drip Proof three-phase asynchronous motors. General information General information Open Drip Proof three-phase asynchronous motors, series PLS, according to IEC 60034, 60066, 60072 power 7,5 kw to 900 kw, frame size 160 to 400 mm, 2, 4, 6 and 8 ; 230/400 V or 400

More information

LARGE MOTOR SOLUTIONS

LARGE MOTOR SOLUTIONS LARGE MOTOR SOLUTIONS Delivering an integrated system based on a qualified architecture for high servo press productivity Customers seeking high throughput for next generation machines often experience

More information

Am Rotböll Weiterstadt fax +49 / /

Am Rotböll Weiterstadt fax +49 / / AC-Motors IGL/IGLU 13-740W housed ac-motors, with active cooling technical features compact, plain single- and three-phase motors UL-certification with the IGLU motors optimized heat dissipation by active

More information

Lenze. Global Drive 9300 servo inverters kw

Lenze. Global Drive 9300 servo inverters kw 401 870 Global Drive 9300 servo inverters 0.37 75 kw 9300 servo inverter flexible and modern automation High-performance 9300 servo inverters with a matching motor program form a perfect drive system.

More information

MOONS SM servo motors offer a great combination of Power, Precision and Value:

MOONS SM servo motors offer a great combination of Power, Precision and Value: MOONS SM Series of servo motors has been expanded and improved. The SM Series now includes a variety of standard windings, more feedback options, and more connection options. Some ratings have increased,

More information

DYNEO VARIABLE SPEED DRIVES Powerdrive FX & MD2 S variable speed drives LSRPM - PLSRPM permanent magnet synchronous motors

DYNEO VARIABLE SPEED DRIVES Powerdrive FX & MD2 S variable speed drives LSRPM - PLSRPM permanent magnet synchronous motors Powerdrive FX & MD2 S variable speed drives LSRPM - PLSRPM permanent magnet synchronous motors 22 kw to 400 kw Technical catalogue 5006 en - 2013.11/b Innovative "C light" technology New patented CL4Q

More information

LSN Atmospheres containing explosive GAS totally enclosed three-phase asynchronous motors General information

LSN Atmospheres containing explosive GAS totally enclosed three-phase asynchronous motors General information General information Non-sparking totally enclosed threephase asynchronous motors, LSN series, according to IEC 60034, 60072, IEC 60079-1 and 60079-15. Single speed: power 0.75 to 90 kw 1, frame size 80

More information

Servo Drives and Motors Technical Data. High performance AC brushless servo motors and servo drives

Servo Drives and Motors Technical Data. High performance AC brushless servo motors and servo drives Servo Drives and tors Technical Data High performance AC brushless servo s and servo drives Complete servo solutions for continuous and pulse duty applications Control Techniques and Leroy-Somer offer

More information

to move Electric Roller Screw Servo Actuators for Spot Welding

to move Electric Roller Screw Servo Actuators for Spot Welding Engineered to move Electric Roller Screw Servo Actuators for Spot Welding INDUSTRIAL ROLLER SCREW SERVO ACTUATORS Strong, Consistent Force for Maximum Productivity and Weld Quality Diakont delivers the

More information

Dyneo Motors & Drives. Unidrive M variable speed drives LSRPM permanent magnet synchronous motors 0.75 kw to 220 kw

Dyneo Motors & Drives. Unidrive M variable speed drives LSRPM permanent magnet synchronous motors 0.75 kw to 220 kw Unidrive M variable speed drives LSRPM permanent magnet synchronous motors 0.75 kw to 220 kw Unidrive M range 0.25 kw to 2.8 MW Customized range of drives to meet the needs of industrial sectors The Unidrive

More information

FCR asynchronous brake motors LS FCR. General information

FCR asynchronous brake motors LS FCR. General information General information LIFTING USE : U.L. Enclosed three-phase asynchronous brake motors, LS series with failsafe brake, according to IEC 34, 72, EN 50281. Single speed : 0.55 to 15, frame size from 80 to

More information

Table of contents. Three-phase asynchronous motors DA

Table of contents. Three-phase asynchronous motors DA Table of contents 1. Three-phase asynchronous motor DA 100-280... 5 1.1. General technical data... 5 1.2. General safety instructions... 6 1.3. Definitions of power ratings... 7 1.3.1. Definitions of power

More information

Introduction. 1/2 Overview 1/3 Benefits 1/3 Application. 1/3 Order No. code. 1/4 Protection strategy

Introduction. 1/2 Overview 1/3 Benefits 1/3 Application. 1/3 Order No. code. 1/4 Protection strategy /2 Overview /3 Benefits /3 Application /3 Order No. code /4 Protection strategy /5 General technical data /5 Converter-fed operation /7 Motor protection /7 Bearing monitoring /8 Electrical design /8 Motor

More information

FLSD (E) Atmospheres containing explosive GAS totally enclosed three-phase asynchronous motors General information

FLSD (E) Atmospheres containing explosive GAS totally enclosed three-phase asynchronous motors General information (E) Atmospheres containing explosive GAS General information Flameproof totally enclosed three-phase asynchronous motors, FLSD (E) series, according to IEC 60034, 60038, 60072, 60079-0 and 60079-1, EN

More information

AC Servodrives Bivector 300/500 Advanced solutions for automation

AC Servodrives Bivector 300/500 Advanced solutions for automation AC Servodrives Bivector 300/500 Advanced solutions for automation ABB Automation Bivector Field Oriented Torque Control - optimal working point setting for maximum KT - robust control in flux weakening

More information

The optimum motor for every motion control task siemens.com/motion-control-motors

The optimum motor for every motion control task siemens.com/motion-control-motors Dynamic and precise SIMOTICS The optimum motor for every motion control task siemens.com/motion-control-motors Whatever proves itself in the line of duty also deserves a name SIMOTICS The history of today

More information

ST SERIES SERVO MOTOR

ST SERIES SERVO MOTOR ST SERIES SERVO MOTOR BEIJING KND CNC TECHNIQUE CO.,LTD. 01.2012 CONTENTS NOTE 1 PROHIBITED 1 SOCKET FIG. 1 CAUTION 1 GENERAL 2 CHARACTERISTICS 2 SUPERIORITY 2 MODEL DESCRIPTION 3 WIRING 4 1. Power connector

More information

Motors and Gearboxes for Wind Turbines. Durable Environmentally Friendly Low Maintenance

Motors and Gearboxes for Wind Turbines. Durable Environmentally Friendly Low Maintenance Motors and Gearboxes for Wind Turbines Durable Environmentally Friendly Low Maintenance Reliability in Many Areas ABM develops and manufactures innovative drive solutions of highest quality. As a single

More information

TGN, TGH AND TGT SERVOMOTORS

TGN, TGH AND TGT SERVOMOTORS TGN, TGH AND TGT SERVOMOTORS Instruction manual. Information furnished by is believed to be accurate and reliable. However, no responsibility is assumed by TG Drives for its use. TG Drives reserves the

More information

GENERAL. Typical applications are: SPECIFICATIONS. Nominal voltage (line to line) Nominal efficiency 96% Pole pair number 6

GENERAL. Typical applications are: SPECIFICATIONS. Nominal voltage (line to line) Nominal efficiency 96% Pole pair number 6 PowerDRUM XXS-frame Permanent magnet electrical machine PRODUCT DATA Visedo PowerDRUM features: Synchronous Reluctance assisted Permanent Magnet (SRPM) technology Extremely compact and robust structure

More information

Siemens AG SIMOTICS T-1FW3 Torque Motors. The Powerful Torque Motors. Edition February Brochure. siemens.

Siemens AG SIMOTICS T-1FW3 Torque Motors. The Powerful Torque Motors. Edition February Brochure. siemens. SIMOTICS T-1FW3 Torque Motors The Powerful Torque Motors Brochure Edition February 2017 siemens.com/torquemotors The powerful torque motors Overview The right torque at the right moment this is decisive

More information

Remy HVH250 Application Manual Remy HVH250 Application Manual

Remy HVH250 Application Manual Remy HVH250 Application Manual Preliminary Draft HVH250 MotorManual20110407.doc Page 1 of 31 TABLE OF CONTENTS 1. INTRODUCTION...3 2. SYSTEM OVERVIEW...3 2.1 Installation Overview...3 2.2 Motor Overview...3 3. HVH MOTOR TYPICAL APPLICATIONS...4

More information

Brushless Servomotors for Industrial Automation

Brushless Servomotors for Industrial Automation CatalogUE ENG Brushless Servomotors for Industrial Automation S65 Servomotors CONTENTS GENERAL INFORMATION 3 Standards and regulations 4 Tolerances 5 Technical descriptions 7 Mechanical design 10 Electrical

More information

SD SERVO MOTOR. General Data

SD SERVO MOTOR. General Data General Data S series of rare earth 3 phase permanent magnet servo motors was conceived and designed as an advanced and homogeneous range of high performance servo actuators, in line with the evolving

More information

AKM 2G Servo Motors. The Next Generation of Servo Motors Offering Industry Leading Performance with a Compact Footprint

AKM 2G Servo Motors. The Next Generation of Servo Motors Offering Industry Leading Performance with a Compact Footprint AKM 2G Servo Motors The Next Generation of Servo Motors Offering Industry Leading Performance with a Compact Footprint Built on 100 Years of Innovation A K M 2 G S E R V O M O T O R AKM 2G represents the

More information

BMH. Servo motor Motor manual V2.1, , V2.1,

BMH. Servo motor Motor manual V2.1, , V2.1, BMH Servo motor Motor manual V2.1, 03.2016 www.schneider-electric.com The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of

More information

Enclosed three-phase asynchronous motors driven by electronic drive LSMV General information

Enclosed three-phase asynchronous motors driven by electronic drive LSMV General information General information Enclosed 3-phase asynchronous motors, series, according to IEC 60034, 60072. motor is the result of Leroy-Somer s experience with speed variation and progress in performance of new

More information

Dyneo Motors & Drives. Powerdrive FX & MD2 variable speed drives LSRPM - PLSRPM permanent magnet synchronous motors 18 kw to 500 kw

Dyneo Motors & Drives. Powerdrive FX & MD2 variable speed drives LSRPM - PLSRPM permanent magnet synchronous motors 18 kw to 500 kw Powerdrive FX & MD2 variable speed drives LSRPM - PLSRPM permanent magnet synchronous motors 18 kw to 500 kw Powerdrive FX range 18 kw to 90 kw Drives with dynamic braking Integrating C-Light 4 Quadrant

More information

Motion control technology HDP Series AC Induction Servomotors. ABB Sace S.p.A. Line S Draft - Page 1 ABB

Motion control technology HDP Series AC Induction Servomotors. ABB Sace S.p.A. Line S Draft - Page 1 ABB Motion control technology HDP Series AC Induction Servomotors Sace S.p.A. Line S Draft - Page 1 HDP Series AC Induction Servomotors The HDP Servomotor series is the solution for the High Dynamics Performances

More information

HANDBOOK -M. Synchronous servo motors

HANDBOOK -M. Synchronous servo motors HANDBOOK -M Synchronous servo motors Contents 1. Technical specification...4 1.1 General...4 1.2 Construction /assembly...4 2. Three phase synchronous motors...5 2.1 Frame type references...5 2.2 Options...5

More information

Permanent Magnet Synchronous Motor. High Efficiency Industrial Motors

Permanent Magnet Synchronous Motor. High Efficiency Industrial Motors VoltPro is a new industrial motor range to meet high efficiency needs of industry by higher level of IE4 efficiency class. Main advantage of this product is cost effective solution ensured by using standard

More information

Phone: Fax:

Phone: Fax: www. hi wi n. c om HI WI NCor por at i on 1400Madel i nelane El gi n,i L60124 Phone:8478272270 Fax:8478272291 i nf o@hi wi n. c om www. hi wi n. c om Welcome to HIWIN Welcome to HIWIN Directly driven HIWIN

More information

EKM Series Motors. For Aerospace & Defense Applications

EKM Series Motors. For Aerospace & Defense Applications EKM Series Motors For Aerospace & Defense Applications EKM Series Motors Table of Contents Introduction........................................................................................ 4 Introduction

More information