Over 40 New Products in this Catalogue

Transcription

1 Over New Produts in this Ctlogue Relief Crtridge Vlves Pge 9: The RP*S is seted style pilot operted relief vlve. This provides redued lekge, fster response nd redued pressure overshoot to give improved pressure ontrol. Pge : The RPGT is "soft strt" relief vlve ville in series only providing pressure rmping over milliseonds when it opens to provide exellent pressure protetion nd redue shok. Pge : The RBAP is n eletro-proportionl, diret ting pilot relief vlve tht fits into the Sun T-8A vity. It n e used s pilot vlve on it's own or together with mny types of min stge pressure ontrol vlves tht hve the T-8A vity in the end of the rtridge. Pge : The RP*C-8 is normlly losed spool type modulting vlve, with T-8A vity in the end. This would enle ny of the Sun pilot vlves, suh s the RBAP proportionl vlve, to e fitted into the end to mke high pity proportionl relief vlve. Pge 5: The RP*S-8 is seted style normlly losed modulting vlve, with T-8A vity in the end. This would enle ny of the Sun pilot vlves, suh s the RBAP proportionl vlve, to e fitted into the end to mke proportionl relief vlve with low lekge on the min stge. Pge 8: The RV*S is ventle, seted style, pilot operted relief vlve. This provides redued lekge, fster response nd redued pressure overshoot to give improved pressure ontrol. Pge : The RV*D-8 is normlly losed, lned piston, modulting element with T-8A vity in the end. The rtridge is ventle nd lso hs n externl drin onnetion. This would enle ny Sun pilot vlve, suh s the RBAP proportionl vlve, to e fitted into the end to mke ventle proportionl relief with seprte drin port. Sequene Crtridge Vlves Pge : The RSDC-8 is normlly losed, lned piston, modulting element with T-8A vity in the end nd externl drin. This would enle ny Sun pilot vlve suh s the RBAP proportionl vlve to e fitted into the end to mke relief vlve with seprte pilot drin. Reduing/Relieving Crtridge Vlves Pge 7: The PB*B-8 is normlly open modulting element with T-8A vity in the end. This would enle ny Sun pilot vlve suh s the RBAP proportionl vlve to e fitted to mke proportionl pressure reduing vlve. Pge 8: The PP*B-8 is normlly open modulting element with T-8A vity in the end. This would enle ny Sun pilot suh s the RBAP proportionl vlve to e fitted into the end to mke proportionl pressure reduing/ relieving vlve. Pge 9: The PV*A-8 is normlly open modulting element with T-8A vity in the end nd n externl drin. This would enle ny Sun pilot vlve, suh s the RBAP proportionl vlve, to e fitted into the end to mke proportionl pressure reduing/relieving vlve with externl drin. Pge nd : The PRD* is n eletro-proportionl, diret ting, pressure reduing/relieving vlve ville in series only. There re two versions ville, one with low lekge nd the other with higher lekge nd improved response. Flow Control Crtridge Vlves Pge 7: The FPCC is n eletro-proportionl, normlly losed throttle vlve ville in series only. It provides some pressure ompenstion ut needs seprte ompenstor for more urte ontrol. Pge 7: The FPCH is n eletro-proportionl, normlly open throttle vlve ville in series only. It provides some pressure ompenstion ut needs seprte ompenstor for more urte ontrol. Priority Flow Control Crtridge Vlves Pge 78: The FV*A-8 is ventle, fixed orifie, priority flow ontrol vlve with T-8A vity in the end of the rtridge. This enles Sun pilot solenoid, pneumti or mnul vlve to e fitted into the rtridge to selet the priority flow ondition or ypss ll flow to tnk. Logi Elements Pge 89: The LO**-8 is poppet type, spring ised losed, pilot-to-lose unlned logi vlve with T-8A vity in the end of the rtridge. This enles Sun pilot solenoid, pneumti or mnul vlve to e fitted into the rtridge to selet the vlve in the open or losed ondition. Pge 95: The DO*R-8 is poppet type, pilot-to-lose, normlly open lned logi vlve with T-8A vity in the end of the rtridge. This enles Sun pilot solenoid, pneumti or mnul vlve to e fitted into the rtridge to selet the vlve in the open or losed ondition. Pge : The DK*R-8 is poppet type, pilot-to-open, normlly losed lned logi vlve with T-8A vity in the end of the rtridge. This enles Sun pilot solenoid, pneumti or mnul vlve to e fitted into the rtridge to selet the vlve in the open or losed ondition. US Shortut Ctlogue #999-9-

2 Over New Produts in this Ctlogue Diretionl Crtridge Vlves Pge 5: The DRBO is diret ting, externlly drined, normlly losed, three-wy diretionl vlve in series only. It is ville with n djustment on the pressure t whih the vlve will swith. Pge 5: The DRBP is diret ting, externlly drined, normlly open, three-wy diretionl vlve in series only. The vlve is ville with n djustment on the pressure t whih the vlve will swith. Pge 5: The DRBR is diret ting, internlly drined, externlly piloted, three-wy diretionl vlve in series only. The vlve is ville with n djustment on the pressure t whih the vlve will swith. Pge 6: The DV*A-8 is diret ting, normlly open, twowy diretionl vlve with T-8A vity in the end. This enles Sun pilot solenoid, pneumti or mnul vlve to e fitted into the rtridge to selet the vlve in the open or losed ondition. Pge 6: The DV*B-8 is diret ting, normlly losed, two-wy diretionl vlve with T-8A vity in the end. This enles Sun pilot solenoid, pneumti or mnul vlve to e fitted into the rtridge to selet the vlve in the open or losed ondition. Pge 6: The DV*C-8 is diret ting, three-wy diretionl vlve with loked nd T-8A vity in the end. This enles Sun pilot solenoid, pneumti or mnul vlve to e fitted into the rtridge to selet the vlve in the open or losed ondition. Pge 6: The DV*D-8 is diret ting, three-wy diretionl vlve with open nd T-8A vity in the end. This enles Sun pilot solenoid, pneumti or mnul vlve to e fitted into the rtridge to selet the vlve in the open or losed ondition. Pge 7: The DV*M-8 is vent-to-operte two-position twowy, normlly open diretionl vlve with T-8A vity in the end nd externl drin. This enles Sun pilot solenoid, pneumti or mnul vlve to e fitted into the rtridge to selet the vlve in the open or losed ondition. Pge 7: The DV*N-8 is vent-to-operte two-position twowy, normlly losed diretionl vlve with T-8A vity in the end nd externl drin. This enles Sun pilot solenoid, pneumti or mnul vlve to e fitted into the rtridge to selet the vlve in the open or losed ondition. Pge 7: The DV*O-8 is vent-to-operte two-position three-wy diretionl vlve with T-8A vity in the end nd externl drin. This enles Sun pilot solenoid, pneumti or mnul vlve to e fitted into the rtridge to selet the vlve in the open or losed ondition. Pge 7: The DV*P-8 is vent-to-operte two-position threewy diretionl vlve with T-8A vity in the end nd externl drin. This enles Sun pilot solenoid, pneumti or mnul vlve to e fitted into the rtridge to selet the vlve in the open or losed ondition. Pge 8: The DF*A-8 two-position, two-wy normlly losed port to, diretionl vlve with T-8A vity in the end of the rtridge. This enles Sun pilot solenoid, pneumti or mnul vlve to e fitted into the rtridge to selet the vlve in the open or losed ondition. Pge 9: The DF*B-8 two-position, two-wy normlly losed port to, diretionl vlve with T-8A vity in the end of the rtridge. This enles Sun pilot solenoid, pneumti or mnul vlve to e fitted into the rtridge to selet the vlve in the open or losed ondition. Pilot Control Crtridge Vlves Pge 5: The DAAM is mnully operted, two-position, two-wy pilot vlve. This vlve ould e fitted into ny rtridge with T-8A vity in the end to provide mnul swithing. Aville with momentry, detented, or dul opertor. Pge 9: The DBAM is mnully operted, two-position, three-wy vlve. Ciruit Svers Pge 6: The COFO is : rtio, pilot to lose hek vlve in series only. This vlve is speifilly designed for umultor unloding nd dump iruits when the pump is not operting. Pge 5: The DS*X is two-position, three-wy, vent-toshift, normlly losed diverter vlve. This vlve ould e used in prllel with flow divider vlves to enle the funtion to e ypssed in trtion drive iruits. Pge 5: The DS*Y is two-position, three-wy, vent-toshift diverter vlve. This vlve works s simple flow diverter vlve. Pge 5: The LHDT is i-diretionl, normlly open modulting vlve in series only. This vlve n e used with n externl orifie to provide pressure ompensted flow ontrol in oth diretions. Hyrid Relief Crtridge Vlves Pge 56: The HRDA is dul funtion rtridge providing oth diret ting relief vlve nd hek vlve. The relief funtion is efore the hek vlve. Pge 57: The HRDB is dul funtion rtridge providing oth diret ting relief vlve nd hek vlve. The relief funtion is fter the hek vlve. Pge 58: The HVCA is dul funtion rtridge providing oth ventle pilot operted relief nd hek vlve. The ventle relief funtion is efore the hek vlve. Pge 59: The HVCA-8 is dul funtion rtridge providing oth normlly losed modulting funtion nd hek vlve nd T-8A vity in the end of the rtridge. This would enle Sun pilot vlve suh s pilot proportionl vlve to provide proportionl pressure ontrol nd hek funtion in one rtridge. US Shortut Ctlogue #999-9-

3 Contents Relief Crtridge Vlves Sequene Crtridge Vlves Reduing nd Reduing/Relieving Crtridge Vlves Pilot Operted Chek Crtridge Vlves Counterlne Crtridge Vlves Chek Crtridge Vlves Flow Control Crtridge Vlves Priority Flow Control Crtridge Vlves Flow Divider/Cominer Crtridge Vlves Logi Elements Diretionl Crtridge Vlves Solenoid Operted Crtridge Vlves Pilot Control Crtridge Vlves Shuttle Crtridge Vlves Ciruit Svers Hyrid Relief Crtridge Vlves Generl Informtion Crtridge Control Options Crtridge Control Kits Cvity Plugs Solenoid Eletril Connetor Options Orifie Pressure Drop Dt Index Wrrnty s printed in Red re Preferred Versions of produts shown in this tlogue nd most redily ville. SUN RECOMMENDED QUANTITY DISCOUNTS FOR STANDARD VALVES One line item One order One shipment F.O.B. Srsot, FL. USA Pries shown for SUN Cvity form tools re net nd not sujet to disounts. Pries for Custom Produts nd Modifitions of Stndrd Vlves re y quottion only. Quntity: Disount: List 7% 5% 5% 5% On Request Consult your SUN distriutor for terms nd onditions overing lnket orders or orders for sheduled repetitive shipments. Sun Hydrulis Corportion reserves the right to hnge existing pries nd disounts t ny time without notie to its ustomers. Selling pries re governed y the prie list in effet t the time of eptne of purhse order. US Shortut Ctlogue #999-9-

4 Speifitions, desriptions nd illustrtive mteril ontined herein were urte s known t the time this pulition ws pproved for printing. Sun Hydrulis reserves the right to disontinue models t ny time, or hnge pries, speifitions or designs without notie or inurring oligtion. All rights reserved. This ook, or ny prt thereof, my not e reprodued or trnsmitted in ny form or y ny mens, eletroni or mehnil, inluding photoopying, reording, or informtion storge nd retrievl systems, for ny purpose without the express written permission of Sun Hydrulis Corportion, 5 West University Prkwy, Srsot, Florid,, USA. Copyright Sun Hydrulis Corportion Srsot, FL USA Printed in the United Sttes of Ameri US Shortut Ctlogue #999-9-

5 Relief Crtridge Vlves Crtridge Type Pge Pilot Operted, Blned Piston 6 Diret Ating 7 Diret Ating, Pilot Stge 8 Pilot Operted, Blned Poppet 9 Pilot Operted, Blned Poppet, Soft Strt Pilot Operted, Kik-down Air Pilot Pilot Operted, Blned Piston, Air Controlled Eletro-proportionl Pilot T-8A Cv Blned Piston, Modulting Element with Integrl Pilot Control Cvity T-8A Cv Blned Poppet, Modulting Element with Integrl Pilot Control Cvity 5 Ventle, Pilot Operted, Blned Piston 6 Modulting Element with Relief Funtion 7 Ventle, Pilot Operted, Blned Poppet 8 Ventle, Pilot Operted, Blned Piston with Externl Drin 9 T-8A Cv Ventle, Blned Piston, Modulting Element with Externl Drin nd Integrl Pilot Control Element US Shortut Ctlogue #

6 Relief Vlves PILOT OPERATED BALANCED PISTON, Full Adjustment 5 Turns + - Outlet Inlet Performne Curves Loting Crtridge Dimensions Typil Instlltion Crtridge Cvity L C K (l. ft.) GPM RPCC LAN T - 6A. /..7. 5/ 5 GPM RPEC LAN T - A.56 7/ /5 5 GPM RPGC LAN T-A.88 / /5 GPM RPIC LAN T - 6A. / /6 GPM RPKC LAN T-8A. 5/ /75 RPCC RPEC RPGC RPIC RPKC Typil Pressure Rise Mximum operting pressure = 5 psi Will ept mximum pressure t. Bk pressure on the tnk port (port ) is diretly dditive t : rtio to the vlve setting. Ftory pressure settings estlished t GPM Typil response time ms. 5 Mximum lekge = RPCC, RPEC: in /min./ psi, RPGC: in /min./ psi, RPIC: in /min./ psi, RPKC: 5 in /min./ psi. RPCC minimum setting for ll spring rnges is 75 psi RP C Control** Adjustment Rnge Sel C GPM* $.9 L Stndrd Srew +$. A - psi +$. N Bun-N +$. E 5 GPM $ 6. C Tmper Resistnt +$. B 5-5 psi +$. V Viton +$. G 5 GPM $ 5.8 K Hndkno +$ 5. C 5-6 psi +$. I GPM $ 97. N 6-8 psi +$. K GPM $87. Q 6 - psi +$. W 5-5 psi +$. Adjustment Rnge Options: A, B, C, nd W re stndrd set t psi. N Option is stndrd set t psi. Q Option is stndrd set t psi. ** See pge 6 for informtion * Minimum setting 75 psi on ll rnges. on Control Options Customer my speify pressure setting. +$. Visit for detiled nd omplete tehnil informtion on our full line of produts. 6 US Shortut Ctlogue #999-9-

7 Relief Vlves DIRECT ACTING Full Adjustment 5 Turns + - Outlet Inlet Performne Curves Loting Typil Crtridge RDBA RDDA RDFA RDHA RDJA 5 5 Typil Pressure Rise Crtridge Dimensions Cvity L C Instlltion (l. ft.) GPM RDBA LAN T - 6A. /..7 5/ 5 GPM RDDA LAN T-A.56 7/8.8. /5 5 GPM RDFA LAN T-A.88 / /5 GPM RDHA LAN T - 6A. /.5. 5/6 GPM RDJA LAN T-8A. 5/ / Mximum operting pressure = 5 psi Cnnot e djusted with pressure t. Will ept mximum pressure t. Bk pressure on the tnk port (port ) is diretly dditive t : rtio to the vlve setting. Ftory pressure settings estlished t GPM Typil response time ms. Mximum lekge = drops/min. t reset. Reset exeeds 9% of rking pressure. RD A Control** Adjustment Rnge Sel B GPM $.9 L Stndrd Srew +$. A 5 - psi +$. N Bun-N +$. D 5 GPM $. C Tmper Resistnt +$. B - 5 psi +$. V Viton +$. F 5 GPM $ 5.8 C - 6 psi H GPM $ 9. D - 8 psi J GPM $87. E - psi S 5- psi W - 5 psi Adjustment Rnge Options: A, B, C, nd W re stndrd set t psi. D Option is stndrd set t psi. E Option is stndrd set t psi. U.S. Ptent #,7,86 ** See pge 6 for informtion S Option is stndrd set t psi. Europen Ptent Pending on Control Options Customer my speify pressure setting. Visit for detiled nd omplete tehnil informtion on our full line of produts. US Shortut Ctlogue #

8 Relief Vlves DIRECT ACTING, PILOT STAGE Full Adjustment 5 Turns + - Outlet Loting Typil Crtridge Crtridge Dimensions Cvity L C K Instlltion (l. ft.) 6 in. /min. RBAC LAN T - A.56 7/ /5 in. /min. RBAA LAN T - A.88 / /5 Inlet Performne Curves RBAC 5 RBAA Typil Pressure Rise P Flow = in. /min. Mximum operting pressure = 5 psi Typil response time ms. Mximum lekge less thn 5 drops/min. 8 6 /min. Bk pressure on the tnk port (port ) is diretly dditive t : rtio to the vlve setting RB A Control** Adjustment Rnge Sel C 6 in./min. $ 7. L Stndrd Srew +$. A 5 - psi +$. N Bun-N A in./min.$ 5. C Tmper Resistnt +$. B 5-5 psi +$. V Viton K Hndkno +$ 5. C 5-6 psi D 5-8 psi E 5 - psi W 5-5 psi Adjustment Rnge Options: A, B, C, nd W re stndrd set t psi. D Option is stndrd set t psi. ** See pge 6 for informtion E Option is stndrd set t psi. on Control Options Customer my speify pressure setting. Visit for detiled nd omplete tehnil informtion on our full line of produts. 8 US Shortut Ctlogue #999-9-

9 Relief Vlves PILOT OPERATED, BALANCED POPPET Loting Outlet Crtridge Dimensions Typil Instlltion Crtridge Cvity L C (l. ft.) 5 GPM RPGS LAN T-A.88 /8..8 5/5 GPM RPIS LAN T - 6A. /..7 5/6 Inlet Performne Curves RPGS RPIS Typil Pressure Rise Mximum operting pressure = 5 psi Mximum lekge drops/min. t reset Reset exeeds 9% of rking pressure. Ftory pressure settings estlished t GPM Typil response time ms. Bk pressure on the tnk port (port ) is diretly dditive t : rtio to the vlve setting RP S Control** Adjustment Rnge Sel G 5 GPM $ 6.8 C Tmper Resistnt +$. A - psi +$. N Bun-N +$.5 Ftory Set I GPM $. B 5-5 psi +$. V Viton K Hndkno C 5-6 psi L Stndrd Srew Adjustment N 6-8 psi Q 6 - psi W - 5 psi Adjustment Rnge Options: A, B, C, nd W re stndrd set t psi. N Option is stndrd set t psi. ** See pge 6 for informtion Q Option is stndrd set t psi. on Control Options Customer my speify pressure setting. Visit for detiled nd omplete tehnil informtion on our full line of produts. US Shortut Ctlogue #

10 Relief Vlves PILOT OPERATED, BALANCED POPPET, SOFT START Outlet Loting Typil Crtridge Crtridge Dimensions Cvity L C Instlltion (l. ft.) 5 GPM RPGT - LAN T-A.88 / /5 Inlet Performne Curves 6 5 Typil Pressure Rise RPGT 5 Typil Rmp Time Threshold t 5 psi Setting Time/ms. Setting 5 psi e.g. Mximum operting pressure = 5 psi Will ept mximum pressure t. Ftory pressure settings estlished t GPM Shifting time from minimum to mximum setting 5 ms. Control pilot flow = to 5 in /min. RP G T Control** Adjustment Rnge Sel G 5 GPM $ 99. C Tmper Resistnt +$. A - psi +$. N Bun-N Ftory Set C 5-6 psi +$. V Viton L Stndrd Srew Adjustment W - 5 psi Adjustment Rnge Options: Ptents: A is stndrd set t psi. U.S. #6,9,7; C is stndrd set t 5 psi. Germny EP 97; ** See pge 6 for informtion W is stndrd set t psi. Jpn #,9, on Control Options Customer my speify pressure setting. Visit for detiled nd omplete tehnil informtion on our full line of produts. US Shortut Ctlogue #999-9-

11 Relief Vlves PILOT OPERATED, KICK-DOWN Full Adjustment 5 Turns + - Outlet Inlet Loting Typil Crtridge Crtridge Dimensions Cvity L C K Instlltion (l. ft.) 5 GPM RQEB LAN T - A.56 7/ /5 5 GPM RQGB LAN T - A.88 / /5 GPM RQIB LAN T - 6A. / /6 GPM RQKB LAN T - 8A. 5/ /75 Performne Curves RQEB RQGB RQIB RQKB 5 5 C & W A 5 B, N, Q A C & W B, N, Q Unloded Pressure Drop B, N, Q C & W A B, N, Q C & W A Mximum operting pressure = 5 psi Will ept mximum pressure t. Flow through rtridge must ese to reset vlve. Bk pressure on the tnk port (port ) is diretly dditive t : rtio to the vlve setting Ftory pressure settings estlished t kik down point. Typil response time 5 ms. Mximum lekge = RQEB: in /min./ psi; RQGB: in /min./ psi, RQIB: in /min./ psi, RQKB: 5 in /min./ psi RQ B Control** Adjustment Rnge Sel E 5 GPM $ 5.8 L Stndrd Srew +$. A - psi +$. N Bun-N G 5 GPM $ 6. C Tmper Resistnt +$. B 5-5 psi +$. V Viton I GPM $9.9 K Hndkno +$ 5. C 5-6 psi K GPM $8. N 6-8 psi Q 6 - psi W 5-5 psi Adjustment Rnge Options: A, B, C, nd W re stndrd set t psi. N Option is stndrd set t psi. ** See pge 6 for informtion Q Option is stndrd set t psi. on Control Options Customer my speify pressure setting. Visit for detiled nd omplete tehnil informtion on our full line of produts. US Shortut Ctlogue #999-9-

12 Relief Vlves PILOT OPERATED, BALANCED PISTON, AIR CONTROLLED Air Pilot Air Pilot Loting Outlet Typil Crtridge Crtridge Dimensions Cvity A B Instlltion (l. ft.) 5 GPM RPGD ABN T-A.88 /8. - 5/5 GPM RPID BBN T - 6A. / -.6 5/6 GPM RPKD BBN T - 8A. 5/8 -. 5/75 Inlet Performne Curves RPGD RPID RPKD Typil Pressure Rise Mximum operting pressure = psi Will ept mximum pressure t. Mximum ir pressure should not exeed 5 psi. Pilot rtio, ir to hydruli = : Typil response time ms. Mximum lekge = RPGD: in /min./, RPID: in /min./ psi, RPKD: 5 in /min./ psi. RP D Control Adjustment Rnge Sel G 5 GPM $.6 Aville for RPGD only B 5-5 psi +$. N Bun-N I GPM $67. A /" NPTF +$. V Viton Pilot t K GPM $. end of Crtridge* Aville for RPID, RPKD only B SAE- +$. Pilot t end of Crtridge* * Mximum ir pilot pressure should not exeed 5 psi. Visit for detiled nd omplete tehnil informtion on our full line of produts. US Shortut Ctlogue #999-9-

13 Relief Vlves ELECTRO-PROPORTIONAL PILOT d Outlet Loting Typil Crtridge Crtridge Dimensions Cvity d Instlltion (l. ft.).5 GPM RBAP MAN T-8A.75 7/ / Inlet Performne Curves Constnt Commnd Vrying Flow RBAP Pressure vs. Commnd Flow. GPM inh /min. 6 8 Commnd (%) Mximum operting pressure = 5 psi Mximum lekge =.5 in /min t reset Bk pressure on the tnk port (port ) is diretly dditive t : rtio to vlve setting Reset exeeds 85% of rking pressure. Hysteresis with dither <% Hysteresis with DC input <8% Linerity with dither <% For optimum performne, n mplifier with urrent sensing nd djustle dither should e used. Dither should e djustle etween - 5 Hz. RB A P Control** Adjustment Rnge Sel A.5 GPM $5. M Mnul Override +$. A - psi +$. N Bun-N $ (Stndrd) B 5-5 psi +$. V Viton NOTE: Coil must e ordered seprtely. Use W 5-5 psi V DC or V DC (Series 77-***) oils only. See pge 67. Visit for detiled nd omplete tehnil informtion on our full line of produts. US Shortut Ctlogue #999-9-

14 Relief Vlves BALANCED PISTON, MODULATING ELEMENT WITH INTEGRAL PILOT CONTROL CAVITY T-8A Cv Loting The -8 ontrol option llows pilot ontrol vlve to e inorported diretly into the end of the modulting element vi the T-8A vity. These pilot ontrol rtridges re sold seprtely nd inlude eletro-proportionl, solenoid, ir pilot, nd hydruli pilot opertion. See Pilot Control Crtridges on pge. Outlet Inlet Typil Crtridge Crtridge Dimensions Cvity Instlltion (l. ft.) 5 GPM RPEC 8WN T - A.56 7/8.75 /5 5 GPM RPGC 8WN T - A.88 /8.69 5/5 GPM RPIC 8WN T - 6A. /.97 5/6 GPM RPKC 8WN T - 8A. 5/8.8 5/75 Performne Curves RPEC-8 RPGC-8 RPIC-8 RPKC-8 Pressure vs. Flow Mximum operting pressure = 5 psi Will ept mximum pressure t. Bk pressure on the tnk port (port ) is diretly dditive t : rtio to the vlve setting Control pilot flow = RPEC-8: 7 to in /min., RPGC-8: to 5 in /min., RPIC, RPKC-8: 5 to in /min. Mximum lekge = RPEC-8: in /min./ psi: RPGC-8: in /min./ psi, RPIC-8: in /min./ psi, RPKC-8: 5 in /min./ psi. With the -8 ontrol option, the min stge vlve should first e instlled to the orret torque vlue. The T-8A pilot ontrol vlve should then e instlled into the min stge vlve to its required torque vlue. RP C 8 Bse Control MinimumControl Prie Pressure Sel E 5 GPM +$. 8 T-8A Cvity in +$. D 5 psi + $. N Bun-N hex ody for G 5 GPM +$ 55.8 pilot opertion W psi +$. V Viton (Pilot vlve to I GPM +$. e ordered seprtely) K GPM Visit for detiled nd omplete tehnil informtion on our full line of produts. US Shortut Ctlogue #999-9-

15 Relief Vlves BALANCED POPPET, MODULATING ELEMENT WITH INTEGRAL PILOT CONTROL CAVITY Loting T-8A Cv The -8 ontrol option llows pilot ontrol vlve to e inorported diretly into the end of the modulting element vi the T-8A vity. These pilot ontrol rtridges re sold seprtely nd inlude eletro-proportionl, solenoid, ir pilot, nd hydruli pilot opertion. See Pilot Control Crtridges on pge. Outlet Inlet Typil Crtridge Crtridge Dimensions Cvity Instlltion (l. ft.) 5 GPM RPGS 8WN T-A.88 /8.69 5/5 GPM RPIS 8WN T - 6A. /.97 5/6 Performne Curves RPGS-8 RPIS-8 Typil Pressure Rise Mximum operting pressure = 5 psi Will ept mximum pressure t. Bk pressure on the tnk port (port ) is diretly dditive t : rtio to the vlve setting. Typil response time ms Control pilot flow = RPGS-8: to 5 in /min., RPIS-8: 5 to in /min. Mximum lekge = drops/min. t reset Reset exeeds 9% of rking pressure. With the -8 ontrol option, the min stge vlve should first e instlled to the orret torque vlue. The T-8A pilot ontrol vlve should then e instlled into the min stge vlve to its required torque vlue. RP S 8 Bse Control** MinimumControl Prie Pressure Sel G 5 GPM $ T-8A Cvity in +$. B 5 psi +$. N Bun-N hex ody for I GPM $6. pilot opertion W psi +$. V Viton (Pilot vlve to e ordered seprtely) Visit for detiled nd omplete tehnil informtion on our full line of produts. US Shortut Ctlogue #

16 Relief Vlves VENTABLE, PILOT OPERATED, BALANCED PISTON Full Adjustment 5 Turns + - Vent Outlet Inlet Performne Curves Loting Typil Crtridge RVBA RVCA RVEA RVGA RVIA Typil Pressure Rise Mximum operting pressure = 5 psi Pressure t port (vent) ontrols the vlve elow its setting. Bk pressure on the tnk port (port ) is diretly dditive t : rtio to the vlve setting. Control pilot flow = RVBA, RVCA: 7 to in /min.; RVEA: to 5 in /min.; RVGA, RVIA: 5 to in /min. Ftory pressure setting estlished t GPM Typil response time ms. Mximum lekge = RVBA, RVCA: in /min./ psi, RVEA: in /min./ psi, RVGA: in /min./ psi, RVIA: 5 in /min./ psi RVBA minimum setting for ll spring rnges is 75 psi Will ept mximum pressure t port. Crtridge Dimensions Cvity L C K Instlltion (l. ft.) 7.5 GPM RVBA LAN T - 6A. / / 5 GPM RVCA LAN T - A.8 7/ /5 GPM RVEA LAN T-A.8 / /5 6 GPM RVGA LAN T - 7A.8 / /6 GPM RVIA LAN T - 9A.5 5/ / RV A Control** Adjustment Rnge Sel B 7.5 GPM* $ 7.7 L Stndrd Srew +$. A - psi +$. N Bun-N C 5 GPM $ 7.7 C Tmper Resistnt +$. B 5-5 psi +$. V Viton E GPM $ 65. K Hndkno +$ 5. C 5-6 psi G 6 GPM $5. N 6-8 psi I GPM $. Q 6 - psi W 5-5 psi Adjustment Rnge Options: A, B, C, nd W re stndrd set t psi. N Option is stndrd set t psi. Q Option is stndrd set t psi. ** See pge 6 for informtion * Minimum setting 75 psi on ll rnges. on Control Options Customer my speify pressure setting. Visit for detiled nd omplete tehnil informtion on our full line of produts. 6 US Shortut Ctlogue #999-9-

17 Relief Vlves MODULATING ELEMENT WITH RELIEF FUNCTION Full Adjustment 5 Turns + - Vent Outlet Inlet Performne Curves Loting Typil Crtridge RVBB RVCB RVEB RVGB RVIB Typil Compenstor Differentils Crtridge Dimensions Cvity L C K Instlltion (l. ft.).5 GPM RVBB LAN T - 6A. / / 5 GPM RVCB LAN T - A.8 7/ /5 GPM RVEB LAN T-A.8 / /5 GPM RVGB LAN T - 7A.8 / /6 GPM RVIB LAN T - 9A.5 5/ /75 Pressure Differentil to (psi) GPM Bypss Flow to 5 GPM GPM Lod Pressure (psi) Pressure Differentil to (psi) Bypss Flow to 5 GPM 5 GPM GPM Lod Pressure (psi) Pressure Differentil to (psi) 6 GPM GPM GPM GPM Bypss Flow to Lod Pressure (psi) Pressure Differentil to (psi) Bypss Flow to GPM 6 GPM GPM Lod Pressure (psi) Pressure Differentil to (psi) 8 GPM GPM Bypss Flow to 6 GPM Lod Pressure (psi) Mximum operting pressure = 5 psi Bk pressue on the tnk port (port ) is diretly dditive t : rtio to the vlve setting. Ftory pressure setting estlished t GPM Typil response time ms. Mximum lekge = RVBB, RVCB: in /min./ psi, RVEB: in /min./ psi, RVGB: in /min./ psi, RVIB: 5 in /min./ psi RV B Control** Adjustment Rnge Sel B.5 GPM* $ 59. L Stndrd Srew +$. A - psi +$. N Bun-N C 5 GPM $ 59. C Tmper Resistnt +$. B - 5 psi* +$. V Viton E GPM $ 8. K Hndkno +$ 5. C - 6 psi G GPM I GPM * For RVCB, the is pressure is 6 psi. Adjustment Rnge Options: A, B, nd C re stndrd set t psi. ** See pge 6 for informtion * Minimum setting psi on ll rnges. on Control Options Customer my speify pressure setting. Visit for detiled nd omplete tehnil informtion on our full line of produts. US Shortut Ctlogue #

18 Relief Vlves VENTABLE, PILOT OPERATED, BALANCED POPPET Vent Outlet Loting Typil Crtridge Crtridge Dimensions Cvity L C K Instlltion (l. ft.) GPM RVES LAN T-A.8 / /5 5 GPM RVGS LAN T - 7A.8 / /75 Inlet Performne Curves RVES RVGS Typil Pressure Rise Vented Pressure Typil Pressure Rise Vented Pressure 5 5 C, W, A B 5 C, W, A 5 B Mximum operting pressure = 5 psi. Will ept mximum pressure t port Pressure t port (vent) ontrols the vlve elow its setting. Bk pressure on the tnk port (port ) is diretly dditive t : rtio to the vlve setting. Ftory pressure setting estlished t GPM Mximum lekge t reset = drops/min. Reset exeeds 9% of rking pressure. Typil response ms Control pilot flow = RVES: to 5 in /min, RVGS: 5 to in /min. RV S Control** Adjustment Rnge Sel E GPM +$ 75. C Tmper Resistnt +$. A - psi +$. N Bun-N Ftory Set G 5 GPM +$.5 B 5-5 psi +$. V Viton K Hndkno C 5-6 psi L Stndrd Srew Adjustment N 6-8 psi Q 6 - psi W - 5 psi ** See pge 6 for informtion on Control Options Adjustment Rnge Options: A, B, C nd W re stndrd set t psi. N Option is stndrd set t psi. Q option is stndrd set t psi. Customer my speify pressure settings. Visit for detiled nd omplete tehnil informtion on our full line of produts. 8 US Shortut Ctlogue #999-9-

19 Relief Vlves VENTABLE, PILOT OPERATED, BALANCED PISTON WITH EXTERNAL DRAIN Full Adjustment 5 Turns + - Drin Vent Outlet Loting Typil Crtridge Crtridge Dimensions Cvity L C K Instlltion (l. ft.) 5 GPM RVCD LAN T - A.8 7/ /5 GPM RVED LAN T - A.8 / /5 6 GPM RVGD LAN T - A.8 / /6 GPM RVID LAN T - A.5 5/ /75 Inlet Performne Curves RVCD RVED RVGD RVID 5 5 A B 5 C & W D & E A B 5 C & W D & E Vented Pressure Typil Pressure Rise A B D & E C & W A D & E C & W B Mximum operting pressure = 5 psi Pressure t port is diretly dditive to the vlve setting t : rtio nd should not exeed 5 psi Pressure t port (vent) ontrols the vlve elow its setting. Control pilot flow = RVCD: 7 to in /min.; RVED: to 5 in /min.; RVGD, RVID: 5 to in /min. Ftory pressure setting estlished t GPM Typil response time ms. Mximum lekge = RVCD: in /min./ psi, RVED: in /min./ psi, RVGD: in /min./ psi, RVID: 5 in /min./ psi. RV D Control** Adjustment Rnge Sel C 5 GPM $ 7.6 L Stndrd Srew +$. A - psi +$. N Bun-N E GPM $. C Tmper Resistnt +$. B 5-5 psi +$. V Viton G 6 GPM $ 8. K Hndkno +$ 5. C 5-6 psi I GPM $ 5.5 D 5-8 psi E 5 - psi W 5-5 psi Adjustment Rnge Options: A, B, C, nd W re stndrd set t psi. D Option is stndrd set t psi. **See pge 6 for informtion E Option is stndrd set t psi. on Control Options Customer my speify pressure setting. Visit for detiled nd omplete tehnil informtion on our full line of produts. US Shortut Ctlogue #

20 Relief Vlves VENTABLE, BALANCED PISTON, MODULATING ELEMENT WITH EXTERNAL DRAIN AND INTEGRAL PILOT CONTROL ELEMENT Drin T-8A Cv The -8 ontrol option llows pilot ontrol vlve to e inorported diretly into the end of the modulting element vi the T-8A vity. These pilot ontrol rtridges re sold seprtely nd inlude eletro-proportionl, solenoid, ir pilot, nd hydruli pilot opertion. See Pilot Control Crtridges on pge. Vent Outlet Inlet Loting Typil Crtridge Crtridge Dimensions Cvity Instlltion (l. ft.) 5 GPM RVCD 8WN T - A.8 7/8.78 /5 GPM RVED 8WN T - A.8 /8. 5/5 6 GPM RVGD 8WN T - A.8 /.59 5/6 GPM RVID 8WN T - A.5 5/8.6 5/75 Performne Curves RVCD-8 RVED-8 RVGD-8 RVID A B 5 C & W D & E A B 5 C & W D & E Vented Pressure Typil Pressure Rise A B D & E C & W A D & E C & W B Mximum operting pressure = 5 psi Pressure t port is diretly dditive to the vlve setting t : rtio nd should not exeed 5 psi Pressure t port (vent) ontrols the vlve elow its setting. Control pilot flow = RVCD: 7 to in /min.; RVED: to 5 in /min.; RVGD, RVID: 5 to in /min. Ftory pressure setting estlished t GPM Typil response time ms. Mximum lekge = RVCD: in /min./ psi, RVED: in /min./ psi, RVGD: in /min./ psi, RVID: 5 in /min./ psi. RV D 8 Bse Control Minimum Control Prie Pressure Sel C 5 GPM $ T-8A Cvity in D 7 psi +$. N Bun-N hex ody for E GPM $. pilot opertion W psi +$. V Viton (Pilot vlve to G 6 GPM $8. e ordered seprtely) I GPM Visit for detiled nd omplete tehnil informtion on our full line of produts. US Shortut Ctlogue #999-9-

21 Sequene Crtridge Vlves Crtridge Type Pge Pilot Operted, Blned Piston T-8A Cv Externlly Drined, Blned Piston, Modulting Element Air Pilot Air Controlled, Pilot Operted, Blned Piston Diret Ating without Reverse Flow Chek 5 Diret Ating with Reverse Flow Chek 6 Pilot Operted, Kik-down 7 US Shortut Ctlogue #999-9-

22 Sequene Vlves PILOT OPERATED, BALANCED PISTON Full Adjustment 5 Turns + - Performne Curves Typil Crtridge RSBC RSDC RSFC RSHC RSJC Drin Sequene 5 5 Inlet Loting 5 5 Pressure Drop Sequened Open Crtridge Dimensions Cvity L C K Instlltion (l. ft.) 7.5 GPM RSBC LAN T - 6A. / / 5 GPM RSDC LAN T - A.8 7/ /5 GPM RSFC LAN T - A.8 / /5 6 GPM RSHC LAN T - 7A.8 / /6 GPM RSJC LAN T - 9A.5 5/ / Mximum operting pressure = 5 psi Mximum lekge = RSDC: in /min./ psi, RSFC: in /min./ psi, RSHC: in /min./ psi RSJC: 5 in /min./ psi. Typil response time ms Pressure t port is diretly dditive to the vlve setting t : rtio nd should not exeed 5 psi. Pilot flow ontinues to inrese s the pressure t port (inlet), reltive to the pressure t port (drin), rises ove the vlve setting. RSBC minimum setting is 75 psi for ll spring rnges RS C Control** Adjustment Rnge Sel B 7.5 GPM* $. L Stndrd Srew +$. A - psi +$. N Bun-N D 5 GPM $. C Tmper Resistnt +$. B 5-5 psi +$. V Viton F GPM $ 6.6 K Hndkno +$ 5. C 5-6 psi H 6 GPM $5.6 N 6-8 psi J GPM $7. Q 6 - psi W 5-5 psi Adjustment Rnge Options: A, B, C, nd W re stndrd set t psi. N Option is stndrd set t psi. Q Option is stndrd set t psi. ** See pge 6 for informtion * Minimum setting 75 psi on ll rnges. on Control Options Customer my speify pressure setting. Visit for detiled nd omplete tehnil informtion on our full line of produts. US Shortut Ctlogue #999-9-

23 Sequene Vlves EXTERNALLY DRAINED, BALANCED PISTON, MODULATING ELEMENT Drin Sequene Inlet Loting T-8A Cv Typil Crtridge The -8 ontrol option llows pilot ontrol vlve to e inorported diretly into the end of the modulting element vi the T-8A vity. These pilot ontrol rtridges re sold seprtely nd inlude eletro-proportionl, solenoid, ir pilot, nd hydruli pilot opertion. See Pilot Control Crtridges on pge. Crtridge Dimensions Cvity Instlltion (l. ft.) 5 GPM RSDC 8WN T - A.8 7/8.9 /5 GPM RSFC 8WN T - A.8 /8.8 5/5 6 GPM RSHC 8WN T - 7A.8 /.8 5/6 GPM RSJC 8WN T - 9A.5 5/8. 5/75 Performne Curves RSDC-8 RSFC-8 RSHC-8 RSJC-8 Typil Pressure Rise Mximum operting pressure = 5 psi Will ept mximum pressure t. 6 Pressure t port is diretly dditive t : rtio to the vlve setting nd should not exeed 5 psi. Control pilot flow = RSDC-8: 7 to in /min., RSFC-8: to 5 in /min., RSHC, RSJC-8: 5 to in /min. Mximum lekge = RSDC-8: in /min./ psi: RSFC-8: in /min./ psi, RSHC-8: in /min./ psi, RSJC-8: 5 in /min./ psi. With the -8 ontrol option, the min stge vlve should first e instlled to the orret torque vlue. The T-8A pilot ontrol vlve should then e instlled into the min stge vlve to its required torque vlue RS C 8 Bse Control MinimumControl Prie Pressure Sel D 5 GPM $ T-8A Cvity in D 5 psi +$. N Bun-N hex ody for F GPM $ 66.6 pilot opertion W psi +$. V Viton (Pilot vlve to H 6 GPM $.6 e ordered seprtely) J GPM Visit for detiled nd omplete tehnil informtion on our full line of produts. US Shortut Ctlogue #999-9-

24 Sequene Vlves AIR CONTROLLED, PILOT OPERATED, BALANCED PISTON Air Pilot Air Pilot Drin Sequene Inlet Loting Typil Crtridge Crtridge Dimensions Cvity A B Instlltion (l. ft.) GPM RSFE ABN T - A.8 /8. - 5/5 6 GPM RSHE BBN T - 7A.8 / -.7 5/6 GPM RSJE BBN T - 9A.5 5/8 -. 5/75 Performne Curves RSFE RSHE RSJE Pressure Drop Sequened Open Pilot rtio, ir to hydruli : Mximum operting pressure = psi Mximum ir pressure should not exeed 5 psi. Typil response time ms. Mximum lekge = RSFE: in /min./ psi, RSHE: in /min./ psi, RSJE: 5 in /min./ psi. RS E B Control Adjustment Rnge Sel F GPM $.6 Aville for RSFE only B 5-5 psi +$. N Bun-N H 6 GPM $76. A /" NPTF V Viton Pilot t J GPM $8.9 end of Crtridge* 5 5 Aville for RSHE, RSJE only B SAE- Pilot t end of Crtridge* Visit for detiled nd omplete tehnil informtion on our full line of produts. US Shortut Ctlogue #999-9-

25 Sequene Vlves DIRECT ACTING WITHOUT REVERSE FLOW CHECK Full Adjustment Turns + - Drin Sequene Loting Typil Crtridge Crtridge Dimensions Cvity L C Instlltion (l. ft.) 5 GPM SXCA LAN T - A.8 7/8.9.5 /5 GPM SXEA LAN T - A.8 / /5 Inlet Performne Curves SXCA SXEA Pressure Drop Sequened Open 5 5 Mximum operting pressure = 5 psi Mximum vlve lekge t reset = drops/min. Typil response time ms Pressure t port is diretly dditive to the vlve setting t : rtio nd should not exeed 5 psi. Reset exeeds 85% of rking pressure. SX A Control** Adjustment Rnge Sel C 5 GPM $ 5. L Stndrd Srew +$. A 5 - psi +$. N Bun-N E GPM $ 65.6 C Tmper Resistnt +$. B - 5 psi +$. V Viton C - 6 psi D - 8 psi W 8-5 psi Adjustment Rnge Options: A, B, nd W re stndrd set t psi. C Option is stndrd set t psi. ** See pge 6 for informtion D Option is stndrd set t psi. on Control Options Customer my speify pressure setting. Visit for detiled nd omplete tehnil informtion on our full line of produts. US Shortut Ctlogue #

26 Sequene Vlves DIRECT ACTING WITH REVERSE FLOW CHECK Full Adjustment Turns + - Drin Sequene Inlet Loting Crtridge Dimensions Typil Instlltion Crtridge Cvity L C (l. ft.) 5 GPM SCCA LAN T - A.8 7/8.9.5 /5 GPM SCEA LAN T - A.8 / /5 6 GPM SCGA LAN T - 7A.8 /.9. 5/6 GPM SCIA LAN T - 9A.5 5/ /75 Performne Curves SCCA SCEA SCGA SCIA Free Flow to Pressure Drop Sequened Open Free Flow Free Flow Free Flow Free Flow Mximum operting pressure = 5 psi Mximum vlve lekge t reset = drops/min. Free flow hek rking pressure = psi Typil response time ms Pressure t port is diretly dditive to the vlve setting t : rtio nd should not exeed 5 psi. Reset exeeds 85% of rking pressure SC A Control** Adjustment Rnge Sel C 5 GPM $ 56.9 L Stndrd Srew +$. A 5 - psi +$. N Bun-N E GPM $ 78.5 C Tmper Resistnt +$. B - 5 psi +$. V Viton G 6 GPM $.9 C - 6 psi I GPM $.5 D - 8 psi W 8-5 psi Adjustment Rnge Options: A, B, nd W re stndrd set t psi. C Option is stndrd set t psi. ** See pge 6 for informtion D Option is stndrd set t psi. on Control Options Customer my speify pressure setting. Visit for detiled nd omplete tehnil informtion on our full line of produts. 6 US Shortut Ctlogue #999-9-

27 Sequene Vlves PILOT OPERATED, KICK-DOWN Full Adjustment 5 Turns + - Drin Sequene Inlet Loting Typil Crtridge Crtridge Dimensions Cvity L C K Instlltion (l. ft.) 5 GPM SQDB LAN T - A.8 7/ /5 GPM SQFB LAN T - A.8 / /5 6 GPM SQHB LAN T - 7A.8 / /6 GPM SQJB LAN T - 9A.5 5/ /75 Performne Curves SQDB SQFB SQHB SQJB Pressure Drop Sequened Open A D & E B C & W Mximum operting pressure = 5 psi D & E A B Mximum lekge = SQDB: in /min./ psi, SQFB: in /min./ psi, SQHB: in /min./ psi SQJB: 5 in /min./ psi Typil response time 5 ms Pressure t port is diretly dditive to the vlve setting t : rtio nd should not exeed 5 psi. To reset vlve, flow through the rtridge must ese. C & W 6 8 D & E A C & W B 6 8 D & E A C & W 8 6 B SQ B Control** Adjustment Rnge Sel D 5 GPM $ 57.8 L Stndrd Srew +$. A - psi +$. N Bun-N F GPM $ 8. C Tmper Resistnt +$. B 5-5 psi +$. V Viton H 6 GPM $.6 K Hndkno +$ 5. C 5-6 psi J GPM $67. D 5-8 psi E 5 - psi W 5-5 psi Adjustment Rnge Options: A, B, C, nd W re stndrd set t psi. D Option is stndrd set t psi. ** See pge 6 for informtion E Option is stndrd set t psi. on Control Options Customer my speify pressure setting. Visit for detiled nd omplete tehnil informtion on our full line of produts. US Shortut Ctlogue #

28 Sequene Vlves NOTES 8 US Shortut Ctlogue #999-9-

29 Reduing nd Reduing/Relieving Crtridge Vlves Crtridge Type Pge Pilot Operted Reduing Pilot Operted Reduing/Relieving Diret Ating Reduing/Relieving Pilot Operted Reduing/Relieving, Externlly Drined Pilot Operted Reduing/Relieving, Ventle Air Pilot Air Controlled, Pilot Operted Reduing 5 Air Pilot Air Controlled, Pilot Operted Reduing/Relieving 6 T-8A Cv Modulting Element with Integrl Pilot Control Cvity 7 T-8A Cv -Wy, Modulting Element with Integrl Pilot Control Cvity 8 T-8A Cv -Wy, Externlly Drined, Modulting Element with Integrl Pilot Control Cvity 9 Eletro-proportionl, Diret Ating Reduing/Relieving Eletro-proportionl, Diret Ating with Low Lekge US Shortut Ctlogue #

30 Reduing nd Reduing/Relieving Vlves PILOT OPERATED REDUCING Full Adjustment 5 Turns + - Drin Inlet Performne Curves Redued Pressure Loting Typil Crtridge PB*B PBDB PBFB PBHB PBJB Regulted Pressure Crtridge Dimensions Cvity L C K Instlltion (l. ft.) 5 GPM PBBB LAN T - 6A. / / GPM PBDB LAN T - A.8 7/ /5 GPM PBFB LAN T - A.8 / /5 GPM PBHB LAN T - 7A.8 / /6 8 GPM PBJB LAN T - 9A.5 5/ / Mximum operting pressure = 5 psi 5 Ftory pressure setting estlished t loked ontrol port (dedhed) Control pilot flow = PBBB, PBDB: 7 to in /min., PBFB: to 5 in /min., PBHB, PBJB: 5 to in /min. Pressure t port is diretly dditive to the vlve setting t : rtio nd should not exeed psi PB B Control** Adjustment Rnge Sel B 5 GPM* $.5 L Stndrd Srew +$. A - psi +$. N Bun-N D GPM $. C Tmper Resistnt +$. B 5-5 psi +$. V Viton F GPM $ 6. K Hndkno +$ 5. N 6-8 psi H GPM $.8 Q 6 - psi J 8 GPM $. W 5-5 psi Adjustment Rnge Options: All re stndrd set t psi. Mximum pressure differentils for spring rnges: A nd B re psi. N nd Q re psi. W is 5 psi inlet pressure. ** See pge 6 for informtion * Minimum setting 75 psi on ll rnges. on Control Options Customer my speify pressure setting. Visit for detiled nd omplete tehnil informtion on our full line of produts. US Shortut Ctlogue #999-9-

31 Reduing nd Reduing/Relieving Vlves PILOT OPERATED REDUCING/RELIEVING Full Adjustment 5 Turns + - Tnk Inlet Redued Pressure Loting Typil Crtridge Crtridge Dimensions Cvity L C K Instlltion (l. ft.) GPM PPDB LAN T - A.8 7/ /5 GPM PPFB LAN T - A.8 / /5 GPM PPHB LAN T - 7A.8 / /6 8 GPM PPJB LAN T - 9A.5 5/ /75 Performne Curves PPDB PPFB PPHB PPJB Regulted Pressure Relieving Reduing Relieving Reduing Relieving Reduing Relieving Reduing Mximum operting pressure = 5 psi Ftory pressure setting estlished t loked ontrol port (dedhed) Control pilot flow = PPDB: 7 to in /min., PPFB: to 5 in /min., PPHB, PPJB: 5 to in /min. Pressure t port is diretly dditive to the vlve setting t : rtio nd should not exeed psi. PP B Control** Adjustment Rnge Sel D GPM $ 5. L Stndrd Srew +$. A - psi +$. N Bun-N F GPM $ 7. C Tmper Resistnt +$. B 5-5 psi +$. V Viton H GPM $6.8 K Hndkno +$ 5. N 6-8 psi J 8 GPM $68.6 Q 6 - psi W 5-5 psi Adjustment Rnge Options: All re stndrd set t psi. Mximum pressure differentils for spring rnges: A nd B re psi. N nd Q re psi. ** See pge 6 for informtion W is 5 psi inlet pressure. on Control Options Customer my speify pressure setting. Visit for detiled nd omplete tehnil informtion on our full line of produts. US Shortut Ctlogue #999-9-

32 Reduing nd Reduing/Relieving Vlves DIRECT ACTING REDUCING/RELIEVING Full Adjustment 5 Turns + - Tnk Inlet Redued Pressure Loting Crtridge Dimensions Typil Instlltion Crtridge Cvity L C K (l. ft.) GPM PRDB LAN T - A.8 7/ /5 GPM PRFB LAN T - A.8 / /5 GPM PRHB LAN T - 7A.8 / /6 8 GPM PRJB LAN T - 9A.5 5/ /75 Performne Curves PRDB PRFB PRHB PRJB Regulted Pressure Relieving Reduing Relieving Reduing Relieving Reduing Relieving Reduing Mximum operting pressure = 5 psi Ftory pressure setting estlished t loked ontrol port (dedhed) Mximum vlve lekge = PRDB: in /min./ psi: PRFB: in /min./ psi, PRHB: in /min./ psi, PRJB: 5 in /min./ psi Pressure t port is diretly dditive to the vlve setting t : rtio nd should not exeed psi. All spring rnges re ple of operting with 5 psi inlet pressure PR B Control** Adjustment Rnge Sel D GPM $ 5. L Stndrd Srew +$. A 5 - psi +$. N Bun-N F GPM $ 7. C Tmper Resistnt +$. B 5-5 psi +$. V Viton H GPM $6.8 K Hndkno +$ 5. D - 8 psi J 8 GPM $68.6 E - psi S - psi W*75-5 psi Aville for PRFB nd PRHB A 75 - psi B - 5 psi +$. Adjustment Rnge Options: D - 8 psi +$. PRDB Only: E - psi +$. A is stndrd set t psi. S 5 - psi +$. B, D, E, S re stndrd set t psi. PRFB, PRHB: A, W re stndrd set t psi. D is stndrd set t psi. E is stndrd set t psi. S is stndrd set t psi. ** See pge 6 for informtion * Not ville for PRFB, PRHB on Control Options Customer my speify pressure setting. Visit for detiled nd omplete tehnil informtion on our full line of produts. US Shortut Ctlogue #999-9-

33 Reduing nd Reduing/Relieving Vlves PILOT OPERATED REDUCING/RELIEVING, EXTERNALLY DRAINED Full Adjustment 5 Turns + - Drin Tnk Inlet Redued Pressure Loting Typil Crtridge Crtridge Dimensions Cvity L C K Instlltion (l. ft.) GPM PVDA LAN T - A.8 7/ /5 GPM PVFA LAN T - A.8 / /5 GPM PVHA LAN T - A.8 / /6 8 GPM PVJA LAN T - A.5 5/ /75 Performne Curves PVDA PVFA PVHA PVJA Regulted Pressure Relieving Reduing Relieving Reduing Relieving Reduing Relieving Reduing Mximum operting pressure = 5 psi Ftory pressure setting estlished t loked ontrol port (dedhed) Control pilot flow = PVDA: 7 to in /min., PVFA: to 5 in /min., PVHA, PVJA: 5 to in /min. Mximum pressure t port should e limited to psi. Pressure on the drin (port ) is diretly dditive to the vlve setting t : rtio nd should not exeed 5 psi. PV A Control** Adjustment Rnge Sel D GPM $ 7. L Stndrd Srew +$. A - psi +$. N Bun-N F GPM $. C Tmper Resistnt +$. B 5-5 psi +$. V Viton H GPM $8.6 K Hndkno +$ 5. D 5-8 psi J 8 GPM $. E 5 - psi W 5-5 psi **See pge 6 for informtion on Control Options Adjustment Rnge Options: All re stndrd set t psi. Mximum pressure differentils for spring rnges: A nd B re psi. D nd E re psi. W is 5 psi inlet pressure. Customer my speify pressure setting. Visit for detiled nd omplete tehnil informtion on our full line of produts. US Shortut Ctlogue #999-9-

34 Reduing nd Reduing/Relieving Vlves PILOT OPERATED REDUCING/RELIEVING, VENTABLE Full Adjustment 5 Turns + - Vent Tnk Inlet Redued Pressure Loting Typil Crtridge Crtridge Dimensions Cvity L C K Instlltion (l. ft.) GPM PVDB LAN T - A.8 7/ /5 GPM PVFB LAN T - A.8 / /5 GPM PVHB LAN T - A.8 / /6 8 GPM PVJB LAN T - A.5 5/ /75 Performne Curves PVDB PVFB PVHB PVJB Regulted Pressure Relieving Reduing Relieving Reduing Relieving Reduing Relieving Reduing Mximum operting pressure = 5 psi Ftory pressure setting estlished t loked ontrol port (dedhed) Control pilot flow = PVDB: 7 to in /min., PVFB: to 5 in /min., PVHB, PVJB: 5 to in /min. Pressure t port is diretly dditive to the vlve setting t : rtio nd should not exeed psi. By ontrolling the pressure t the vent (port ), the effetive setting of the vlve n e ontrolled elow the nominl vlve setting. PV B Control** Adjustment Rnge Sel D GPM $ 7.6 L Stndrd Srew +$. A - psi +$. N Bun-N F GPM $.8 C Tmper Resistnt +$. B 5-5 psi +$. V Viton H GPM $8. K Hndkno +$ 5. D 5-8 psi J 8 GPM $7.6 E 5 - psi W 5-5 psi Adjustment Rnge Options: All re stndrd set t psi. Mximum pressure differentils for spring rnges: A nd B re psi. D nd E re psi. ** See pge 6 for informtion W is 5 psi inlet pressure. on Control Options Customer my speify pressure setting. Visit for detiled nd omplete tehnil informtion on our full line of produts. US Shortut Ctlogue #999-9-

35 Reduing nd Reduing/Relieving Vlves AIR CONTROLLED, PILOT OPERATED REDUCING SAE- Pilot Air Pilot Drin Inlet Redued Pressure Loting Typil Crtridge Crtridge Dimensions Cvity A B Instlltion (l. ft.) GPM PBFC ABN T - A.8 /8. - 5/5 GPM PBHC BBN T - 7A.8 / -.8 5/6 8 GPM PBJC BBN T - 9A.5 5/8 -. 5/75 Performne Curves PBFC PBHC PBJC Regulted Pressure Pilot rtio, ir to hydruli : Mximum operting pressure = psi Mximum ir pressure should not exeed 5 psi. Control pilot flow = PBFC: to 5 in /min., PBHC, PBJC: 5 to in /min. Mximum pressure differentil, inlet to outlet = psi. The pressure t port determines the minimum vlve setting nd should not exeed psi. PB C Control Adjustment Rnge Sel F GPM $. Aville in PBFC only B 5-5 psi +$. N Bun-N H GPM $86. A /" NPTF V Viton Pilot t J 8 GPM $86.8 end of Crtridge Aville for PBHC, PBJC only B SAE- Pilot t end of Crtridge Visit for detiled nd omplete tehnil informtion on our full line of produts. US Shortut Ctlogue #

36 Reduing nd Reduing/Relieving Vlves AIR CONTROLLED, PILOT OPERATED REDUCING/RELIEVING SAE- Pilot Air Pilot Tnk Inlet Redued Pressure Loting Typil Crtridge Crtridge Dimensions Cvity A B Instlltion (l. ft.) GPM PPFC ABN T - A.8 /8. - 5/5 GPM PPHC BBN T - 7A.8 / -.8 5/6 8 GPM PPJC BBN T - 9A.5 5/8 -. 5/75 Performne Curves PPFC PPHC PPJC Regulted Pressure Relieving Reduing Relieving Reduing Relieving Reduing Pilot rtio, ir to hydruli : Mximum operting pressure = psi Mximum ir pressure should not exeed 5 psi. Control pilot flow = PPFC: to 5 in /min., PPHC, PPJC: 5 to in /min. Mximum pressure differentil, inlet to outlet = psi. The pressure t port determines the minimum vlve setting nd should not exeed psi PP C Control Adjustment Rnge Sel F GPM $. Aville in PPFC only B 5-5 psi +$. N Bun-N H GPM $.6 A /" NPTF V Viton Pilot t J 8 GPM $. end of Crtridge Aville for PPHC, PPJC only B SAE- Pilot t end of Crtridge 5 5 Visit for detiled nd omplete tehnil informtion on our full line of produts. 6 US Shortut Ctlogue #999-9-

37 Reduing nd Reduing/Relieving Vlves MODULATING ELEMENT WITH INTEGRAL PILOT CONTROL CAVITY T-8A Cv The -8 ontrol option llows pilot ontrol vlve to e inorported diretly into the end of the modulting element vi the T-8A vity. These pilot ontrol rtridges re sold seprtely nd inlude eletro-proportionl, solenoid, ir pilot, nd hydruli pilot opertion. See Pilot Control Crtridges on pge. Drin Loting Inlet Redued Pressure Typil Crtridge Crtridge Dimensions Cvity Instlltion (l. ft.) GPM PBDB 8WN T - A.8 7/8.9 /5 GPM PBFB 8WN T - A.8 /8.8 5/5 GPM PBHB 8WN T - 7A.8 /.8 5/6 8 GPM PBJB 8WN T - 9A.5 5/8. 5/75 Performne Curves PBDB-8 PBFB-8 PBHB-8 PBJB-8 Regulted Pressure with T-8A Pilot Stge Instlled Relieving Reduing Relieving Reduing Relieving Reduing Relieving Reduing Mximum operting pressure = 5 psi 5 Control pilot flow = PBDB-8: 7 to in /min., PBFB-8: to 5 in /min., PBHB-8, PBJB-8: 5 to in /min. Pressure t port is diretly dditive to the vlve setting t : rtio nd should not exeed psi. Mximum inlet pressure is determined y the is spring. The D spring is limited to psi mximum differentil pressure nd the W spring is limited to 5 psi mximum inlet pressure. With the -8 ontrol option, the min stge vlve should first e instlled to the orret torque vlue. The T-8A pilot ontrol vlve should then e instlled into the min stge vlve to its required torque vlue. 5 PB B 8 Bse Control Minimum Control Prie Pressure Sel D GPM $ 7. 8 T-8A Cvity in +$. D 5 psi +$. N Bun-N hex ody for F GPM $ 65. pilot opertion W psi +$. V Viton (Pilot vlve to H GPM $8.8 e ordered seprtely) J 8 GPM Visit for detiled nd omplete tehnil informtion on our full line of produts. US Shortut Ctlogue #