Illustrated Parts List

Transcription

1 Illustrated Parts List. Ordering Parts For your convenience, replacement parts and accessories can be ordered from ARPAC by fax 24 hours a day. Please have the following information available to ensure quick, easy, and accurate service. Your name and telephone number Your P.O. (Purchase Order) number Your preferred method of delivery Replacement Parts Policy & Contact Information Should a replacement part be needed, ARPAC s return material authorization policy must be adhered to. ARPAC will not distribute equipment or parts without a purchase order from an authorized ARPAC distributor. This procedure includes warranty and nonwarranty replacement parts. A return authorization will be issued at that time, and credit will not be issued until the suspect part has been received and inspected. Call ARPAC sales for the distributor in your area at (847) ARPAC Parts Contact Information Phone: (847) Fax: (847) Hour Emergency Service: (800) parts@arpac.com Open for service Monday through Friday, 7:00 AM to 6:00 PM (Central Time). Ordering Parts -

2 .2 How to Use This Parts List General Part Numbers This chapter contains all part numbers necessary to order L-Series Automatic L-Bar Sealer replacement parts and assemblies. This illustrated parts breakdown is presented in disassembled order. Detail parts are shown below their respective upper level assemblies whenever possible. The parts lists follow the illustration for a particular assembly and represent components of that assembly. The number listed in the quantity column is the number of the specific part required to complete the assembly and may not reflect the quantity needed for the entire system. The lists are divided into four columns. The item/index numbers refer to the identification number located on the drawing. The part number is the Arpac part number, used to identify the part for ordering. The part description column lists each part name, and the quantity column lists the quantity of that part used in that particular assembly. Illustrations are shown before the parts list for each assembly How to Use This Parts List

3 .3 Commonly Ordered Parts Part Description L-8 P/N L-26 P/N Seal Pad, /4 x 3/4 Soft (6 ft.) Teflon Tape (3 mil) ( rl) Silicone Grease ( tube) T/D Seal Blade ( ea.) M/D Seal Blade ( ea.) T/D Heater ( ea.) M/D Heater ( ea.) Solid State Relay (24 VDC) (ea.) Thermocouple ( ea.) Infeed Conveyor Belt - Green Smooth Top (Standard) Infeed Conveyor Belt - White Smooth Top (Food Grade Applications) Infeed Conveyor Belt - Green Rough Top (Dry Ice Applications) OutfeedConveyor Belt - Green Smooth Top (Standard) OutfeedConveyor Belt - White Smooth Top (Food Grade Applications) OutfeedConveyor Belt -Green Rough Top (Dry Ice Applications) Upper Scrap Belt ( ea.) Lower Scrap Belt ( ea.) Seal Head Solenoid (24VDC ) ( ea.) Temperature Controller Photo Sensor Transmitter DC with 6 in Pigtail Photo Sensor Receiver DC with 6 in Pigtail Relay, Control 2PDT Coil=24VDC Slim Line-Relay Relay, Solid-State PST Coil=5+VDC Table -: Commonly Ordered Parts.3 Commonly Ordered Parts -3

4 .4 List of Options L-8 P/N L-26 P/N Description Lugged Infeed Conveyor Core (Refer to Section.30 6 Lugged Infeed Conveyor Core (Option) [22793] on page -66 for breakdown of assembly) VAC Conversion Kit (Refer to Section.3 480VAC Conversion Kit (Option) on page -68 for breakdown of assembly) Lower Film Cradle (Refer to Section.32 Lower Film Cradle (Option) [97355] on page -69 for breakdown of assembly) Auxilliary Emergency Stop Button (Refer to Section.33 Auxiliary Emergency Stop Button (Option) [94576] on page -70 for breakdown of assembly) A A Auxiliary Infeed Conveyor Control Relay (Refer to Section.34 Auxiliary Infeed/Discharge Conveyor Control Relay (Option) [ A] on page -7 for breakdown of assembly) Vertical Photoeye (Refer to Section.35 Vertical Photoeye (Option) [94595] on page -72 for breakdown of assembly) Pneumatic Hole Punch (Refer to Section.36 Pneumatic Hole Punch (Option) [97340] on page -73 for breakdown of assembly) Product Guide (Refer to Section.37 Infeed Product Guide (Option) [94572] on page -74 for breakdown of assembly) Seal Opening Kit (Refer to Section.38 Seal Opening Kit (Option) on page -75 for breakdown of assembly) Stack Light (Refer to Section.39 Stack Light (Option) [94578] on page -76 for breakdown of assembly) Registration Kit (Refer to Section.40 Registration Kit (Option) [94575] on page -77 for breakdown of assembly) Table -2: List of Options -4.4 List of Options

5 Page Intentionally Blank.4 List of Options -5

6 .5 Overall Assemblies Figure -. Overall Assemblies -6.5 Overall Assemblies

7 Fig ref. L-8 P/N L-26 P/N Description Qty Frame Assembly (Refer to Section on page -0 for breakdown of assembly) Trim Rewind Assembly (Refer to Section.8 Trim Rewind Assembly on page -2 for breakdown of assembly) Seal Head Assembly (Refer to Section.9 L-8 Seal Head Assembly (254526) on page -4 or Section. 0 L-26 Seal Head Assembly (25866) on page -8 for breakdown of assembly) Seal Head Frame Assembly (Refer to Section.2 Seal Head Frame Assembly on page -42 for breakdown of assembly) A Film Unwind Assembly (Refer to Section.22 Film Unwind Assembly on page -46 for breakdown of assembly) A Take Away Assembly (Refer to Section.23 Take Away Assembly on page -50 for breakdown of assembly) B Outfeed Apron Assembly (Refer to Section.24 Outfeed Apron Assembly on page -54 for breakdown of assembly) A Outfeed Slide Conveyor Assembly (Refer to Section.25 Outfeed Slide Conveyor on page -56 for breakdown of assembly) Electrical Components (Refer to Section.26 Electrical Components (Part ) on page -60 for breakdown of assembly) Pneumatic Components (Refer to Section.29 Pneumatics Components on page -65 for breakdown of assembly) A Infeed Conveyor Assembly (Refer to Section.6 Infeed Conveyor Assembly on page -8 for breakdown of assembly) Table -3: Overall Assemblies.5 Overall Assemblies -7

8 .6 Infeed Conveyor Assembly Washer Figure -2. Infeed Conveyor Assembly -8.6 Infeed Conveyor Assembly

9 Fig ref. L-8 P/N L-26 P/N Description Qty A Conveyor Belt Green Rough Top - Dry Ice B Conveyor Belt White Smooth Top (Food Grade) C Conveyor Belt Green Smooth Top Drive Chain Screw Block Screw Rod 5A Photoeye, Transmitter 5B Photoeye, Receiver Nut Plate Plate Nut Bracket; Photoeye Wing Nut Conveyor Bed Plate Lower Film Former Bar Support Nut Plate Nut Plate Drive Roller Guard Guard Motor Mount Slide Rod Motor & Reducer Nut Plate Pillow Block Bushing Block Bearing Scale Mounting Block Guide Pointer Pointer Upper Film Former Handwheel Screw Slide Rod Hole Bearing Plate Table -4: Infeed Conveyor Assembly.6 Infeed Conveyor Assembly -9

10 Fig ref. L-8 P/N L-26 P/N Description Qty Garlock Busing Roller Tube Roller Shaft Circlip Bushing Bracket Roller Bracket, Front Roller Bracket, Rear Bracket Photoeye Bracket Photoeye Bracket Bar Upper Film Support Rod Block Roller Tube Bearing Snap Ring Roller Shaft Collar Bracket Guard Bracket Frame Pan Sprocket, RS35B Extension Block Bushing Roller Tube, Idler Shaft Bearing Idler Roller Mounting Bracket Nose Roller Tube Shaft Bearing 6 68 e8795r 8795 Fender Washer Bushing Housing, Center/Rear Bushing Housing, Front Nut Block Table -4: Infeed Conveyor Assembly -0.6 Infeed Conveyor Assembly

11 .7 Frame Assembly Figure -3. Frame Assembly 5 6 Fig ref. L-8 P/N L-26 P/N Description Qty Cover Cover Cover Discharge (Clear) Cover Discharge Lower Cover, Top Bracket Screw, Levelings Caster Cover (Clear) Cover For Duct Frame, Main Door (Clear) Lower Door (Clear) Table -5: Frame Assembly.7 Frame Assembly -

12 .8 Trim Rewind Assembly Figure -4. Trim Rewind Assembly -2.8 Trim Rewind Assembly

13 Fig ref. L-8 P/N L-26 P/N Description Qty Cam Counter Weight Dancer Arm Bearing Housing Shaft Bushing; Flanged Roller; Tube Motor Motor Mount Drive Sprocket Chain Driven Sprocket Spool End, Inner Spool End, Outer Hub, Inner Hub, Outer Shaft Bearing, NSK 6804Z Bracket Roller Axle Hub Roller Plunger Core E Clip Retainer; Spring Spring Brake; Leather Bracket; Leathermounting Bracket; Lower Knob; 3 Lobe Washer; Fender Table -6: Trim Rewind Assembly -3

14 .9 L-8 Seal Head Assembly (254526) Item 7 (on Seal Head Frame Assembly) Item 9 (on Seal Head Frame Assembly) Item 4 (on Seal Head Frame Assembly) 0 37 Item 2 (on Seal Head Frame Assembly) Item 5 (on Seal Head Frame Assembly) 8 9 Figure -5. L-8 Seal Head Assembly -4.9 L-8 Seal Head Assembly (254526)

15 Fig ref. Part number Description Qty 9568 T/D Seal Bar Support T/D Film Clamp, Inner, PE, L8 Hanagata 0Z Thermocouple, Type K, Sheath 30MM Long 3MM DIA, Leads 92mm Long (65MM Split W/spad) Insulator T/D Film Clamp, Outer, PE, L8, Hanagata 0Z M/D Film Clamp, Inner, L8, Hanagata 0Z Stud Spring Block Sensor Plate (Safety Switch) Proximity Sensor, DC 2-4 Wire 5.0MM NC 2M-Cable Insulator Mounting Plate M/D Bar Mount Assembly M/D Film Clamp, Outer, PE, L8, Hanagata 0Z M/D Seal Head Support T/D Anvil Support Bar Block Floating Joint Seal Head Cylinder Spacer M/D Anvil Support Bar M/D Anvil Mounting T/D Anvil Mounting Reed Switch, DC 2-Wire Insulator 4A XXXXX L-8 Seal Bar Assembly -Standard (Refer to Section. L-8 Seal Bar Assembly Standard (XXXXX) on page -22 for breakdown of assembly). Table -7: L-8 Seal Head Assembly.9 L-8 Seal Head Assembly (254526) -5

16 Fig ref. Part number Description Qty 4B L-8 Seal Bar Assembly Blacksparkle - Polyolefin (Refer to Section.2 L-8 Seal Bar Assembly Blacksparkle - Polyolefin (26585) on page -24 for breakdown of assembly). 4C L-8 Seal Bar Assembly Mushroom Radius Corner - Polyolefin, PVC (Refer to Section.3 L-8 Seal Bar Assembly Mushroom Radius Corner - Polyolefin, PVC (26586) on page -26 for breakdown of assembly). 4D L-8 Seal Bar Assembly Mushroom Straight Corner - Polyolefin, PVC (Refer to Section.4 L-8 Seal Bar Assembly Mushroom Straight Corner - Polyolefin, PVC (26587) on page -28 for breakdown of assembly). 4E L-8 Seal Bar Assembly Plasma - Polyethelyne, PVC (Refer to Section.5 L- 8 Seal Bar Assembly Plasma - Polyethelyne Polyolefin, PVC (26588) on page -30 for breakdown of assembly). Table -7: L-8 Seal Head Assembly -6.9 L-8 Seal Head Assembly (254526)

17 Page Intentionally Blank.9 L-8 Seal Head Assembly (254526) -7

18 . 0 L-26 Seal Head Assembly (25866) Item 7 (on Seal Head Frame Assembly) Item 9 (on Seal Head Frame Assembly) Item 4 (on Seal Head Frame Assembly) 0 37 Item 2 (on Seal Head Frame Assembly) Item 5 (on Seal Head Frame Assembly) 8 9 Figure -6. L-26 Seal Head Assembly L-26 Seal Head Assembly (25866)

19 Fig ref. Part number Description Qty 956 Frame Plate, Stripper Thermocouple, Type K, Sheath 30MM Long 3MM DIA, Leads 92mm Long (65MM Split W/spad) T/D Bar Mount Assembly Insulator Plate, Stripper, Outer, T/D L Plate, Stripper, Inner, M/D, L Stud Spring Block Sensor Plate (Safety Switch) Proximity Sensor, DC 2-4 Wire 5.0MM NC 2M-Cable Insulator Mounting Plate M/D Bar Mount Assembly Plate, Stripper, Outer, M/D, L T/D Anvil Support Bar Block Floating Joint Seal Head Cylinder Spacer M/D Anvil Support Bar M/D Anvil Mounting T/D Anvil Mounting Reed Switch, DC 2-Wire Tape, Teflon 2 x.003 x 0 Yards.43 4A XXXXX L-26 Seal Bar Assembly -Standard (Refer to Section.6 L-26 Seal Bar Assembly Standard (XXXXX) on page -32 for breakdown of assembly). 4B L-26 Seal Bar Assembly Blacksparkle - Polyolefin (Refer to Section.7 L-26 Seal Bar Assembly Blacksparkle - Polyolefin (26589) on page -34 for breakdown of assembly) Table -8: L-26 Seal Head Assembly. 0 L-26 Seal Head Assembly (25866) -9

20 Fig ref. Part number Description Qty 4C L-26 Seal Bar Assembly Mushroom Radius Corner - Polyolefin, PVC (Refer to Section.8 L-26 Seal Bar Assembly Mushroom Radius Corner - Polyolefin, PVC (26590) on page -36 for breakdown of assembly) 4D 2659 L-26 Seal Bar Assembly Mushroom Straight Corner - Polyolefin, PVC (Refer to Section.9 L-26 Seal Bar Assembly Mushroom Straight Corner - Polyolefin, PVC (2659) on page -38 for breakdown of assembly) 4E L-26 Seal Bar Assembly Plasma - Polyethelyne, PVC (Refer to Section.20 L- 26 Seal Bar Assembly Plasma - Polyethelyne Polyolefin, PVC (26592) on page -40 for breakdown of assembly) Table -8: L-26 Seal Head Assembly L-26 Seal Head Assembly (25866)

21 Page Intentionally Blank. 0 L-26 Seal Head Assembly (25866) -2

22 . L-8 Seal Bar Assembly Standard (XXXXX) Standard Seal Bar Used on Polyolefin Film with Narrow Width Seal Figure -7. L-8 Seal Bar Assembly Standard -22. L-8 Seal Bar Assembly Standard (XXXXX)

23 Fig ref. Part number Description Qty T/D Seal Bar Blade - Standard T/D Seal Blade Insert T/D Heater Cartiridge M/D Heater Cartidge M/D Seal Bar Blade - Standard M/D Seal Bar Body, Set T/D Seal Pad T/D Seal Anvil Side Plate Side Plate M/D Seal Pad M/D Seal Anvil Side Plate Table -9: L-8 Seal Bar Assembly Standard. L-8 Seal Bar Assembly Standard (XXXXX) -23

24 .2 L-8 Seal Bar Assembly Blacksparkle - Polyolefin (26585) Black Speckle Seal Bar Used on Sticky Polyolefin & Sticky Polyethylene Film with Wide Seal Flow Direction Blade (M/D) Tranverse Direction Blade (T/D) Figure -8. L-8 Seal Bar Assembly Blacksparkle L-8 Seal Bar Assembly Blacksparkle - Polyolefin (26585)

25 Fig ref. Part number Description Qty Blade, Knife, 8.0", Bar, Seal, Coated Halves, Bar, Seal, 460MM, T/D, L Heater, Cartridge, T/D(0Z), 200V, 400W 8."LG, DIA +/ ",6LG Lead Heater, Cartridge, M/D(0Z), 200V, 450W, 9.5" LG, DIA +/-.004", 6LG Lead Blade, Knife, Bar, Seal, M/D, 0Z, Blacksparkle Coated Halves, Bar, Seal, 495MM, M/D, L T/D Seal Pad T/D Seal Anvil Side Plate Side Plate M/D Seal Pad M/D Seal Anvil Side Plate A Insert, Bar, Seal, Plasma, T/D, Notched, 0Z, 460MM=8.0" Inserts, Bar, Seal, Plasma, LG, M/ D, (Set) Insert, Bar, Seal, Plasma, 460MM Long, T/D, 460MM=8.0" Table -0: L-8 Seal Bar Assembly Blacksparkle - Polyolefin.2 L-8 Seal Bar Assembly Blacksparkle - Polyolefin (26585) -25

26 .3 L-8 Seal Bar Assembly Mushroom Radius Corner - Polyolefin, PVC (26586) Mushroom Radius Corner Blade Set Used on Polyethylene Film with Narrow Width Seal & a Tight Square Corner Typical Mushroom Inserts and Blades , ,2 6 Figure -9. L-8 Seal Bar Assembly Mushroom Radius - Polyolefin, PVC L-8 Seal Bar Assembly Mushroom Radius Corner - Polyolefin, PVC (26586)

27 Fig ref. Part number Description Qty Blade, Cutting, Front, Arrow, Bar, Seal L Side Plate Heater, Cartridge, T/D(0Z), 200V, 400W 8."LG, DIA +/ ",6LG Lead Heater, Cartridge, M/D(0Z), 200V, 450W, 9.5" LG, DIA +/-.004", 6LG Lead Blade, Cutting, Cross, Arrow, Bar, Seal L M/D Seal Anvil T/D Seal Pad T/D Seal Anvil Side Plate Side Plate M/D Seal Pad Insert, Front, Arrow, Bar, Seal, Radius Insert, Cross, Arrow, Bar, Seal, Radius T/D Seal Blade Insert M/D Seal Bar Body, Set Table -: L-8 Seal Bar Assembly Mushroom Radius Corner.3 L-8 Seal Bar Assembly Mushroom Radius Corner - Polyolefin, PVC (26586) -27

28 .4 L-8 Seal Bar Assembly Mushroom Straight Corner - Polyolefin, PVC (26587) Mushroom Square Corner Blade Set Used on Polyethylene Film with Narrow Width Seal Typical Mushroom Inserts and Blades , ,2 6 Figure -0. L-8 Seal Bar Assembly Straight Corner - Polyolefin, PVC L-8 Seal Bar Assembly Mushroom Straight Corner - Polyolefin, PVC (26587)

29 Fig ref. Part number Description Qty Blade, Cutting, Front, Arrow, Bar, Seal L Side Plate Heater, Cartridge, T/D(0Z), 200V, 400W 8."LG, DIA +/ ",6LG Lead Heater, Cartridge, M/D(0Z), 200V, 450W, 9.5" LG, DIA +/-.004", 6LG Lead Blade, Cutting, Cross, Arrow, Bar, Seal L M/D Seal Anvil T/D Seal Pad T/D Seal Anvil Side Plate Side Plate M/D Seal Pad Insert, Front, Arrow, Bar, Seal, Straight Insert, Cross, Arrow, Bar, Seal, Straight T/D Seal Blade Insert M/D Seal Bar Body, Set Table -2: L-8 Seal Bar Assembly Mushroom Straight Corner.4 L-8 Seal Bar Assembly Mushroom Straight Corner - Polyolefin, PVC (26587) -29

30 .5 L-8 Seal Bar Assembly Plasma - Polyethelyne Polyolefin, PVC (26588) Plasma Seal Bar Used on Non-Stick Polyolefin & Polyethylene Film with Wide Seal Flow Direction Blade (M/D) Tranverse Direction Blade (T/D) Figure -. L-8 Seal Bar Assembly Plasma - Polyethelyne, Polyolefin, PVC L-8 Seal Bar Assembly Plasma - Polyethelyne Polyolefin, PVC (26588)

31 Fig ref. Part number Description Qty Blade, Knife, 8.0", Bar, Seal, T/D 460mm= Halves, Bar, Seal, 460MM, T/D, L Heater, Cartridge, T/D(0Z), 200V, 400W 8."LG, DIA +/ ",6LG Lead Heater, Cartridge, M/D(0Z), 200V, 450W, 9.5" LG, DIA +/-.004", 6LG Lead Blade, Knife, Bar, Seal, M/D, 0Z, Blacksparkle Coated Halves, Bar, Seal, 495MM, M/D, L T/D Seal Pad T/D Seal Anvil Side Plate Side Plate M/D Seal Pad M/D Seal Anvil Side Plate A Insert, Bar, Seal, Plasma, T/D, Notched Inserts, Bar, Seal, Plasma, M/D (Set) Insert, Bar, Seal, Plasma, T/D Table -3: L-8 Seal Bar Assembly Plasma.5 L-8 Seal Bar Assembly Plasma - Polyethelyne Polyolefin, PVC (26588) -3

32 .6 L-26 Seal Bar Assembly Standard (XXXXX) Standard Seal Bar Used on Polyolefin Film with Narrow Width Seal Figure -2. L-26 Seal Bar Assembly Standard L-26 Seal Bar Assembly Standard (XXXXX)

33 Fig ref. Part number Description Qty 9504 T/D Seal Bar Blade - Standard T/D Seal Blade Insert T/D Heater Cartiridge M/D Heater Cartidge M/D Seal Bar Blade - Standard M/D Seal Bar Body, Set T/D Seal Pad T/D Seal Anvil Side Plate Side Plate M/D Seal Pad M/D Seal Anvil Side Plate Table -4: L-26 Seal Bar Assembly Standard.6 L-26 Seal Bar Assembly Standard (XXXXX) -33

34 .7 L-26 Seal Bar Assembly Blacksparkle - Polyolefin (26589) Black Speckle Seal Bar Used on Sticky Polyolefin & Sticky Polyethylene Film with Wide Seal Flow Direction Blade (M/D) Tranverse Direction Blade (T/D) Figure -3. L-26 Seal Bar Assembly Blacksparkle - Polyolefin L-26 Seal Bar Assembly Blacksparkle - Polyolefin (26589)

35 Fig ref. Part number Description Qty Blade, Knife, , Bar, Seal, Coated Halves, Bar, Seal, 560MM, T/D, L Heater, Cartridge, T/D Heater, Cartridge, M/D Blade, Knife, Bar, Seal, M/D, 0Z, Blacksparkle Coated Halves, Bar, Seal, 495MM, M/D, L T/D Seal Pad T/D Seal Anvil Side Plate Side Plate M/D Seal Pad M/D Seal Anvil Side Plate A Insert, Bar, Seal, Plasma, T/D, Notched Insert, Bar, Seal, Plasma, 560mm Long Inserts, Bar, Seal, Plasma, M/D (Set) Table -5: L-26 Seal Bar Assembly Blacksparkle Polyolefin.7 L-26 Seal Bar Assembly Blacksparkle - Polyolefin (26589) -35

36 .8 L-26 Seal Bar Assembly Mushroom Radius Corner - Polyolefin, PVC (26590) Mushroom Radius Corner Blade Set Used on Polyethylene Film with Narrow Width Seal & a Tight Square Corner Typical Mushroom Inserts and Blades , ,3 9 0 Figure -4. L-26 Seal Bar Assembly Mushroom Radius - Polyolefin, PVC L-26 Seal Bar Assembly Mushroom Radius Corner - Polyolefin, PVC (26590)

37 Fig ref. Part number Description Qty 8255 Blade, Cutting, Front, Arrow, Bar, Seal L Heater, Cartridge, T/D (30Z) Heater, Cartridge, M/D (30 Z) Blade, Cutting, Cross, Arrow, Bar, Seal L T/D Seal Pad T/D Seal Anvil Side Plate Side Plate M/D Seal Pad M/D Seal Anvil Side Plate Insert, Cross, Arrow, Bar, Seal Insert, Front, Arrow, Bar, Seal T/D Seal Blade Insert M/D Seal Bar Body, Set Table -6: L-26 Seal Bar Assembly Mushroom Radius Corner.8 L-26 Seal Bar Assembly Mushroom Radius Corner - Polyolefin, PVC (26590) -37

38 .9 L-26 Seal Bar Assembly Mushroom Straight Corner - Polyolefin, PVC (2659) Mushroom Square Corner Blade Set Used on Polyethylene Film with Narrow Width Seal Typical Mushroom Inserts and Blades , ,3 9 0 Figure -5. L-26 Seal Bar Assembly Straight Corner - Polyolefin, PVC L-26 Seal Bar Assembly Mushroom Straight Corner - Polyolefin, PVC (2659)

39 Fig ref. Part number Description Qty Blade, Cutting, Front, Arrow, Bar, Seal L Heater, Cartridge, T/D (30Z) Heater, Cartridge, M/D (30 Z) Blade, Cutting, Cross, Arrow, Bar, Seal L T/D Seal Pad T/D Seal Anvil Side Plate Side Plate M/D Seal Pad M/D Seal Anvil Side Plate Insert, Cross, Arrow, Bar, Seal Insert, Front, Arrow, Bar, Seal T/D Seal Blade Insert M/D Seal Bar Body, Set Table -7: L-26 Seal Bar Assembly Mushroom Straight Corner.9 L-26 Seal Bar Assembly Mushroom Straight Corner - Polyolefin, PVC (2659) -39

40 .20 L-26 Seal Bar Assembly Plasma - Polyethelyne Polyolefin, PVC (26592) Plasma Seal Bar Used on Non-Stick Polyolefin & Polyethylene Film with Wide Seal Flow Direction Blade (M/D) Tranverse Direction Blade (T/D) Figure -6. L-26 Seal Bar Assembly Plasma - Polyethelyne, Polyolefin, PVC L-26 Seal Bar Assembly Plasma - Polyethelyne Polyolefin, PVC (26592)

41 Fig ref. Part number Description Qty Blade, Knife, Bar, Seal, T/D 560mm Lg 30z Halves, Bar, Seal, 560MM, T/D, L Heater, Cartridge, T/D Heater, Cartridge, M/D Blade, Knife, Bar, Seal, M/D 560mm Lg 30z Halves, Bar, Seal, 495MM, M/D, L T/D Seal Pad T/D Seal Anvil Side Plate Side Plate M/D Seal Pad M/D Seal Anvil Side Plate A Insert, Bar, Seal, Plasma, T/D, Notched Insert, Bar, Seal, Plasma, T/D Inserts, Bar, Seal, Plasma, M/D (Set) Table -8: L-26 Seal Bar Assembly Plasma.20 L-26 Seal Bar Assembly Plasma - Polyethelyne Polyolefin, PVC (26592) -4

42 .2 Seal Head Frame Assembly Lower Chain Both Sides (Upper Chain Both Sides) (Block) 3 (Bearing) 9 (Block) 3 (Bearing) 4 2 (Block) 3 (Bearing) 5 (Block) 3 (Bearing) Figure -7. Seal Head Frame Assembly Seal Head Frame Assembly

43 Fig ref. L-8 P/N L-26 P/N Description Qty Plate Polished Shaft Chain Stud Block Chain Side Frame, Rear Stud, Idler Sprocket, Idler Screw Shaft Guide Block, Top Rear Linear Bearing Block Guide Block, Top Front Bushing Guide Block, Bottom Rear Mounting Block Guide Block, Bottom Front Bushing Bushing Housing Bottom Frame Sensor Bracket Top Frame Sprocket Bearing Pointer Ruler Side Frame, Front Plate Thrust Bearing Nut Bushing Bearing Housing Chain Sprocket Crank Handle Table -9: Seal Head Frame Assembly.2 Seal Head Frame Assembly -43

44 Fig ref. L-8 P/N L-26 P/N Description Qty Shaft Bearing Housing Sprocket Bearing, NSK 6902Z Slide Bracket Reed Switch Mounting Bracket Proximity Switch Bar Nut Box; Junction Bracket; Mounting Cover Table -9: Seal Head Frame Assembly Seal Head Frame Assembly

45 Page Intentionally Blank.2 Seal Head Frame Assembly -45

46 .22 Film Unwind Assembly Figure -8. Film Unwind Assembly Film Unwind Assembly

47 Fig ref. L-8 P/N L-26 P/N Description Qty Shaft, Film Cradle Roller Rod Roll, Idler Roller Film Cradle W/Out Grooves Roller Film Cradle W/Grooves Film Drive Roller Shaft, Idler Roll Bushings Snap Ring Snap Ring Bushing Cover Support Bracket Hand Knob Bearing, 2 Hole Frange Bracket Bearing Shaft, Roller, Film Pinch Perf, Wheel, Dual O Ring Style Pin (P/O Item 00200) Bracket Bracket, Dancer Collar Static Discharge Point Rod Shaft; Weight Film Guide Weight Pivot, Shaft Dancer Stud Housing Cam Shaft, Dancer Roll Film Separator Shaft, Idler Roll Static Eliminator Brush Bracket Guard Table -20: Film Unwind Assembly.22 Film Unwind Assembly -47

48 Fig ref. L-8 P/N L-26 P/N Description Qty Roller, Film Pinch Spring Fixture Pivot Shaft Spring Adjustment Bolt Release Lever Cam Nut Plate Spring Nut Washer Bearing Knob Handle Sprocket Cover Chain Sprocket Support Bracket Gear Motor Switch, Roller Plunger Plate; Collar Retaining Collar; Rod Retainer (Center) Collar; Rod Retainer (Outer) Bracket; Dancer Collar W/90 Bend Brake; Leather Bracket; Spring Retaining Bracket, Leather Retaining Bracket; Brake Mounting Bushing; Brake Collar Collar; Brake Shaft Bushing; Film Cradle Roller Spring; Extension Table -20: Film Unwind Assembly Film Unwind Assembly

49 Page Intentionally Blank.22 Film Unwind Assembly -49

50 .23 Take Away Assembly Figure -9. Take Away Assembly Take Away Assembly

51 Fig ref. L-8 P/N L-26 P/N Description Qty Gearmotor Nut Plate Bracket, Motor Mount Sprocket Stud Idler Pulley, Flanged Bearing, Ashi Flange Sprocket Idler Pulley, Smooth Shaft Drive Pulley, Htd Timing Belt Bracket, Drive Shaft Mounting Nut Plate Pressure Plate Take-Away Bracket Scrap Finger Stud Lower Pinch Roller Open Gear Block 000A Pin Guard Spring Compression Washer Block Knob Guard Screw A A Pulley, Htd Timing Belt Upper Pinch Roller Upper Belt, 465 J Lower Belt, 353 J Chain, Roller RS Bearing, NSK 6800 Z Bushing, Garlock MB22DO Bearing, NSK 690Z 4 Table -2: Take Away Assembly.23 Take Away Assembly -5

52 Fig ref. L-8 P/N L-26 P/N Description Qty Stud Roller Hub Hub Standoff Mounting Bracket Rotary Encoder Shaft Coupling Idler Mounting Bracket Wing Nut Plate; Upper Pressure Table -2: Take Away Assembly Take Away Assembly

53 Page Intentionally Blank.23 Take Away Assembly -53

54 .24 Outfeed Apron Assembly Figure -20. Outfeed Apron Assembly Outfeed Apron Assembly

55 Fig ref. L-8 P/N L-26 P/N Description Qty Plate, W/Tape Guard Bracket Shaft 000A Roller Collar Shaft Block Bearing Sprocket Roll, Rubber Roller Shaft Bracket Bracket Spacer Nut Plate Motor Frame Bracket Roll Bracket Stud Shaft Tube; Nose Roller Bar Roller Bracket 29A Conveyor Belt Green Rough Top - Dry Ice 29B Conveyor Belt White Smooth Top (Food Grade) 29C Conveyor Belt Green Smooth Top Chain Table -22: Outfeed Conveyor Assembly.24 Outfeed Apron Assembly -55

56 .25 Outfeed Slide Conveyor Figure -2. Outfeed Slide Conveyor Outfeed Slide Conveyor

57 Fig ref. L-8 P/N L-26 P/N Description Qty Frame Bed Plate Slide Bed Cross Member 5A Conveyor Belt Green Rough Top - Dry Ice 5B Conveyor Belt White Smooth Top (Food Grade) 5C Conveyor Belt Green Smooth Top Guard Chain Guide Block Collar Tensioner Bolt & Washer Tension Roller Shaft Roller Tube Roller Shaft 3 000A Roller Shaft Drive Roller Bearing Sprocket Motor Junction Box Nut Plate Mounting Foot Nose Roller Tube Bushing Roller Shaft Bracket Bracket Magnetic Reed Switch Air Cylinder Solenoid Valve (24VDC) 2 3A Flow Restrictor 2 3B Solenoid Valve with Bypass Switch Air Tubing 2 ft. Table -23: Outfeed Slide Conveyor.25 Outfeed Slide Conveyor -57

58 Fig ref. L-8 P/N L-26 P/N Description Qty Cross Member Bracket Cross Member Linear Shaft Stroker Limiter Threaded Rod Bushing Housing Only SFPBE Bushing FL Bushing; Compensating FLC Carriage Side Plate Front Carriage Side Plate Rear Coupling; Cylinder M/F Bracket Cross Member Bearing External Snap Ring Straight Air Fitting Manifold (NS) art number 8772 Floating Joint Coupling Table -23: Outfeed Slide Conveyor Outfeed Slide Conveyor

59 Page Intentionally Blank.25 Outfeed Slide Conveyor -59

60 .26 Electrical Components (Part ) ,8 6 4,5 2, , Figure -22. Electrical Components (Part ) Electrical Components (Part )

61 Fig ref. Part number Description Qty 8734 Solid State Relay, Omron G3NA-20B Circuit Breaker, Allen-Bradley CBG V 5 A Circuit Breaker, Allen-Bradley CB2G V 3A Circuit Breaker, Allen-Bradley 492- CB2G V 5A Circuit Breaker, Allen-Bradley 2 492CBG V 3A Adjustable Frequency Motor Controller Inverter, Mistubishi FREQROL-E500-FR- E520S-0. K Power Supply, Omron S82J Main Circuit Breaker, 5 Amp, Square D QOU25, 2P 5A Thermocouple Converter, ABB 2 SVR0753R Potentiometer, P Adjustable Frequency Motor Controller Inverter, Mistubishi SC-A200U Relay, Allen-Bradley 700-HK32A Relay, Socket, Allen-Bradley 700-HN Master Control Relay Allen-Bradley 00- C23ZJ0 23A Contact, Aux. Allen-Bradley 00-FA Analog Output, Microlux 200, Allen-Braley 762-IF20F PLC, Allen-Bradley Microlux PLC Memory Cartridge, Allen-Bradley 762-MM Operator Interface, EXOR ETOP Cable, Communication, Exor CA Pushbutton Switch, Fuji AR22FOR-0G Pushbutton Switch, Fuji AR22V2L E Pushbutton Switch, Fuji AR22FOR-0W Pushbutton Switch, Fuji AR22FOL Pushbutton Switch, Fuji AR22FOR-0G Pushbutton Switch, Fuji AR22FOR-0G Table -24: Electrical Components (Part ).26 Electrical Components (Part ) -6

62 .27 Electrical Components (Part 2) Figure -23. Electrical Components (Part 2) Electrical Components (Part 2)

63 Fig ref. L8 P/N L26 P/N Description Qty Magnetic Door Switch Omron GLS-S Roller Plunger Switch OHM Z-5G022B Photosensor, Transmitter, Allen-Bradley 42EF-EEZB-F Photosensor, Reciever Allen-Bradley 42EF-R9MPBV-F Reed Switch, SMC D-H7BL Thermocouple, Watlow Proximity Switch, Omron TL-W5MD Cartridge Heater, Side Seal Cartridge Heater, Cross Seal Rotary Encoder, Omron E6A2-CS5C (Not Shown) Table -25: Electrical Components (Part 2).27 Electrical Components (Part 2) -63

64 .28 Electrical Components (Options) (Part 3) Figure -24. Electrical Components (Part 3) Fig ref. Part number Description Qty Light Stack, Red, Allen-Bradley 855T- B24DN Light Stack, Amber, Allen-Bradley 855T- B24DN Light Stack, Green, Allen-Bradley 855T- B24DN Stack Light Base, Allen-Bradley 855T- BPM25C Photo Sensor, Low Film Alert, Allen-Bradley 42BT-BLBSN (Not Shown) Table -26: Electrical Components (Part 3) Electrical Components (Options) (Part 3)

65 .29 Pneumatics Components, ,9 2A,2B Figure -25. Pneumatic Components Fig ref. Part number Description Qty 877 Air Filter/Regulator Assembly, SMC AW30-03-GH-W Air Filter Element, SMC AF30P-060S Solenoid Valve, SMC VP542-5DZ-03AF Solenoid Valve, SMC VT DLS Solenoid Valve, SMC VFR20-5DZC Check Valve, Aladco Solenoid Valve Air Manifold Air Manifold Flow Control Valves Shut Off Valve 2A 8040 Air Regulator 2B 804 Air Gage Cushion Speed Control Table -27: Pneumatic Components.29 Pneumatics Components -65

66 .30 6 Lugged Infeed Conveyor Core (Option) [22793] Figure Lugged Infeed Conveyor Core (Option) Lugged Infeed Conveyor Core (Option) [22793]

67 Fig ref. Part number Description Qty Sprocket Shaft, Idler Cam, Chain, Head A Block, Takeup A Cover, Lug Cam, Tail, Chain, LH Motor, Gear, /2 HP Kebco A Sprocket Block, Takeup Cover, End, SS Cover, End, SS Cam, Tail, Chain, RH Plate, Nut Channel, Conveyor, L.H Channel, Conveyor, R.H Plate, Spacer, Motor XBar, Support, Rail Rail, Chain, Bracket, Support, Plate, Top Shaft, Drive, Conveyor Sprocket Bracket, Switch X-Brace Torque Limiter, Helland Zero Max Chain, Roller #40 Roller Bearing, Flange ID Bracket, Support, Plate, Top Table -28: 6 Lugged Infeed Conveyor Core (Option).30 6 Lugged Infeed Conveyor Core (Option) [22793] -67

68 .3 480VAC Conversion Kit (Option) 2 A, B Figure V Conversion Kit (Option) Fig ref. Part number Description Qty A Transformer ( VAC) B Transformer ( VAC) Transformer Mounting Plate Table -29: 480V Conversion (Option) VAC Conversion Kit (Option)

69 .32 Lower Film Cradle (Option) [97355] 2 5,6,7 4 3 Figure -28. Lower Film Cradle (Option) Fig ref. L-8 P/N L-26 P/N Description Qty Bracket, Idler Roller Mounting RH Bracket, Idler Roller Mounting LH Bracket, Film Frame Bracker, Film Frame Shaft, Idler Roller Roller, Idler Bushing 4 Table -30: Lower Film Cradle (Option).32 Lower Film Cradle (Option) [97355] -69

70 .33 Auxiliary Emergency Stop Button (Option) [94576] Figure -29. Auxiliary Emergency Stop Button (Option) Fig ref. Part number Description Qty Infeed E-Stop Mount Button, Operator Block, 4 Across Latch Contact, N/C Contact, N/O Operator Enclosure Legend Plate, Blank Standard Red T & B Conn. /2 X Conduit, Locknut (Not Shown) Wire, 8 Conductor 2 Table -3: Auxiliary Stop Button (Option) Auxiliary Emergency Stop Button (Option) [94576]

71 .34 Auxiliary Infeed/Discharge Conveyor Control Relay (Option) [ A] Note: This option is used for conveyors not provided by Arpac. 3 2 Figure -30. Auxiliary Infeed Control Relay (Option) Fig ref. Part number Description Qty Relay, Extra Slim Cable Connector 7 Table -32: Auxiliary Infeed Control Relay (Option).34 Auxiliary Infeed/Discharge Conveyor Control Relay (Option) [ A] -7

72 .35 Vertical Photoeye (Option) [94595] Figure -3. Vertical Photoeye (Option) Fig ref. Part number Description Qty Vertical Eye Mount, Lower Vertical Eye Mount, Upper Vertical Eye Mount, Nut Plate Vertical Eye Mount, Angle Photo Sensor, Transmitter DC Photo Sensor, Receiver, DC Cable Terminal Wire Nut Connector, Terminal, Fork Tie, Cable Hardware for Vertical Eye Kit Splice, Nylon, Insulated Wire, Cable Tie Cross Section Hex Head Cap Screw, M4 x 0.7 x 2mm Washer, Flat, M Screw, Thumb, M4 x 0.7 x Washer, Lock, Split M4 6 Table -33: Vertical Photoeye (Option) Vertical Photoeye (Option) [94595]

73 .36 Pneumatic Hole Punch (Option) [97340] Figure -32. Pneumatic Hole Punch (Option) Fig ref. L-8 P/N L-26 P/N Description Qty Mounting Plate (RH) Mounting Plate (LH) Bar Nut, M* 2 3/4 Centers Tube, Hole Punch Spacer Dia x 5/6 Thick Bar, Hole Punch Spacer, Hole Punch Cylinder Cylinder, Hole Punch Bimba 840-A Valve, Solenoid, Hole Punch Tubing, 5/6 O.D. Clear Tube Fitting, 90 Deg. Elbow, 8mm Fitting, Plug In Reducer Tube Fitting, 0mm Union Tee Knob, Bolt M8 x.25 Stud x 20mm Washer, Flat, M Socket Head Cap Screw, M8 x 40mm Button Head Cap Screw Washer, Lock, M8 8 Table -34: Pneumatic Hole Punch (Option).36 Pneumatic Hole Punch (Option) [97340] -73

74 .37 Infeed Product Guide (Option) [94572] 3 or 4 6 7, Figure -33. Infeed Product Guide (Option) Fig ref. Part number Description Qty Clamp Plate, SS Bracket, Guide, Product, SS Product Guide Product Guide (for Reverse Flow Machines Only) Screw, Set, M8 x 2mm Hex Head Cap Screw, /4-20 x 2 3/4 SS Washer, Lock, Split /4 SS Nut, /4-20 Hex SS 4 Table -35: Infeed Product Guide (Option) Infeed Product Guide (Option) [94572]

75 .38 Seal Opening Kit (Option) Fig ref. L-8 P/N 8 Figure -34. Seal Opening Kit (Option) L-26 P/N 0 Description Spacer, Seal Height Crank Spacer, Seal Height Jack Screw Cylinder Block Seal Head Cylinder Hex Head Cap Screw M6 X X 60mm 4 Table -36: Seal Opening Kit (Option) Qty.38 Seal Opening Kit (Option) -75

76 .39 Stack Light (Option) [94578] Figure -35. Stack Light (Option) Fig ref. Part number Description Qty Light Stack, Red, Allen-Bradley 855T- B24DN Light Stack, Amber, Allen-Bradley 855T- B24DN Light Stack, Green, Allen-Bradley 855T- B24DN Stack Light Base, Allen-Bradley 855T- BPM25C Table -37: Stack Light (Option) Stack Light (Option) [94578]

77 .40 Registration Kit (Option) [94575] Fig ref. Part number Description Qty Bracket, Print Reg. Eye Mounting Strip, Nut, Print Reg. Eye Bracket, Print Reg Shaft, Print Reg. Eye Adj. Handle, Stud Type /4-20 x 3/ Photo Sensor, Registration Cable, Registration Table -38: Registration Kit (Option) Figure -36. Registration Kit.40 Registration Kit (Option) [94575] -77

78 -78