PITNEY BOWES SPEED SORT CONVEYOR SSCON9-DRY CONTACT. Parts Manual PARTS-SSCON9-DRYCONTACT 1

Transcription

1 SPEED SORT CONVEYOR SSCON9-DRY CONTACT Parts Manual PARTS-SSCON9-DRYCONTACT 1

2 VERSION HISTORY The table below summarizes the history of this document as it is published onto the company website(s). It identifies the version, date of issue and revisions and changes. VERSION DATE CHANGES PARTS-SSCON9-DRY CONTACT Initial release REVISION CONVENTIONS-DOCUMENT VERSION: name of document with revision_level of entire document- level designates minor changes that do not require revision change DATE: date of issue for copying and publication of document. CHANGES: details of document revision_level. PARTS-SSCON9-DRYCONTACT i

3 TABLE OF CONTENTS SPEED SORT CONVEYOR-DRY CONTACT SPEED SORT CONVEYOR ASSEMBLY (Fig. 1) 4-5 BEARING BLOCKS/ROLLER/PULLEY (Fig. 2A-2D) 6-7 END CAP ADJ GUIDE ASSEMBLY (Fig. 3) 8 SPEED SORT ASSEMBLY (Fig. 4A-4B) 9-12 PNEUMATICS ASSEMBLY (Fig. 5A-5B) ELECTRICAL ASSEMBLY (Fig. 6) PARTS-SSCON9-DRYCONTACT 2

4 SPEED SORT CONVEYOR PARTS-SSCON9-DRYCONTACT 3

5 SPEED SORT CONVEYOR ASSEMBLY (Fig. 1) ITEM PART NO. QTY DESCRIPTION ASSY, BEARING BLOCK, DRIVE ASSY, BEARING BLOCK, IDLER ASSY, DRIVE ROLLER, ASSY, IDLER PULLEY, SIDE FRAME, CONVEYOR, BELT, ENDLESS, 10 W X 12-1 LONG LEG, CONVEYOR IDLER, LEG, CONVEYOR DRIVE, FOOT, ADJUSTABLE, 5/ CASTER, 2 DIAM., DOUBLE WHEEL GUARD, CONVEYOR DRIVE LEG COVER, BOTTOM COVER, REAR ROLLER BLOCK, BEARING ADJUSTING GUIDE, DISCHARGE TRANSFER BLOCK, GUIDE MOUNTING PLATE, ACCUMULATOR PULLEY, TIMING, 24L050, 1/2B W/ 1/8KWAY BELT, TIMING, 210L COLLAR, ONE PIECE, SPLIT-1/2B WASHER, NYLON, 5/8 X 1/ WASHER, STEEL 23-2 HBOLT, 1/4-20 X HBOLT, 1/4-20 X 3/ SCREW, BUT HD, 1/4-20 X 5/ SCREW, SKT HD, #10-24 X SCREW, BUT HD, #10-24 X 1/ SCREW, BUT HD, #10-24 X 3/ HEX NUT, 5/ HEX NUT, 1/ WASHER, STAR, 1/ WASHER, FLAT, 1/ WASHER, FLAT, #10 PARTS-SSCON9-DRYCONTACT 4

6 FIG. 1 PARTS-SSCON9-DRYCONTACT 5

7 SPEED SORT CONVEYOR (Fig. 2A -2D) BEARING BLOCKS / ROLLER / PULLEY ITEM PART NO. QTY DESCRIPTION ASSY, BEARING BLOCK, DRIVE FIG 2A EA BLOCK, BEARING EA BEARING, SEALED, 5/8 X 1-3/8 (W/ SNAP RING) ASSY, BEARING BLOCK, IDLER FIG 2B EA BLOCK, BEARING EA BEARING, SEALED, 5/8 X 1-3/8 (W/ SNAP RING) ASSY, DRIVE ROLLER, 3 FIG 2C PULLEY, 10 CROWNED SHAFT, STUB DRIVE SHAFT, STUB IDLER ASSY, IDLER PULLEY, 3 FIG 2D SHAFT, STUB IDLER PULLEY, 10 CROWNED FIG. 2A FIG. 2B PARTS-SSCON9-DRYCONTACT 6

8 FIG. 2C FIG. 2D PARTS-SSCON9-DRYCONTACT 7

9 SPEED SORT CONVEYOR (Fig. 3) END CAP ADJ. GUIDE ASSEMBLY ITEM PART NO. QTY DESCRIPTION END CAP, IDLER END W/ SLOTS WEDGE, GUIDE SHAFT, GUIDE SUPPORT BLOCK, KNOCK DOWN MTG TEE NUT, KNOCK DOWN BAR, KNOCK DOWN SUPPORT KNOB, #10 SCREW SHOULDER BOLT, 1/4 X 1/4 9 2 SCREW, FLAT HD, #10-24 X 1/2 PARTS-SSCON9-DRYCONTACT 8

10 SPEED SORT CONVEYOR (Fig. 4A) SPEED SORT ASSEMBLY ITEM PART NO. QTY DESCRIPTION PLATE, SPEED SORT MTG BAR, KNOCKDOWN PLATE MTG BAR, KNOCKDOWN ROLLER MTG BRACKET, KNOCK DOWN MTG BRACKET, KNOCKDOWN CONE, STOP (LONG) CONE, STOP (SHORT) SHAFT, 1-3/8 ROLLER COVER, SPEED SORT STRAP, KNOCKDOWN ASSY, KNOB, #10-24 X 1/ ASSY, KNOB, #10-24 X 3/ SNAP RING, 3/ BOLT, SHOULDER, 1/4 X 3/ SHCS, #10-24 X SHCS, 1/4-20 X 5/ SBHCS, #8-32 X 1/ SBHCS, X 1/ FLAT WASHER, 1/ SFHCS, #10-24 X 1/2 PARTS-SSCON9-DRYCONTACT 9

11 FIG. 4A SEE FIG 4B PARTS-SSCON9-DRYCONTACT 10

12 SPEED SORT CONVEYOR (Fig. 4B) SPEED SORT ASSEMBLY ITEM PART NO. QTY DESCRIPTION PLATE, SIDE MTG BLOCK, CLEVIS BLOCK, CLEVIS MTG ROLLER, KNOCKDOWN SHAFT, CONE PIVOT SHAFT, KNOCKDOWN ROLLER MTG BRACKET, KNOCKDOWN ROLLER ADJ BRACKET, CONE PIVOT BRACKET, SPRING STEEL GUIDE, SPRING STEEL CYLINDER, COMPACT, 20mm B X 12mm ST CLEVIS, DOUBLE ROD PIN, SPRING, 1/8 X 7/ PIN, CLEVIS BRACKET, CYLINDER FITTING, FLO-CONTROL, #10-32 X 1/4 TUBE BEARING, 1/4 X 5/8 SEALED BUSHING, SLEEVE, 3/8 X 1/2 X 3/ WASHER, NYLON, 1/4 X 1/ WASHER, NYLON, 3/8 X 1/ SNAP RING, EXTERNAL, 1/ COLLAR, SHAFT, 3/ FT TUBING, CLEAR, 1/4 (NOT SHOWN) 24-6 SHCS, #10-24 X 1/ SHCS, #10-24 X 3/ SHCS, #10-24 X 3/ SBHCS, #10-24 X 3/8 PARTS-SSCON9-DRYCONTACT 11

13 FIG. 4B PARTS-SSCON9-DRYCONTACT 12

14 SPEED SORT CONVEYOR (Fig. 5A) PNEUMATICS ASSEMBLY (SOLENOID) ITEM PART NO. QTY DESCRIPTION SOLENOID, 2-POS, 24V DC MUFFLER, 1/4 NPT FITTING, MALE CONNECTOR, 1/4 NPT X 1/4 TUBE N/S CONNECTOR, 2 POS RECEPTACLE N/S CONTACT, SOCKET, AWG PARTS-SSCON9-DRYCONTACT 13

15 SPEED SORT CONVEYOR (Fig. 5B) PNEUMATICS ASSEMBLY (REGULATOR) ITEM PART NO. QTY DESCRIPTION REGULATOR FITTING, MALE CONNECTOR, 1/8 NPT X 1/4 TUBE GAUGE, PSI COUPLING, QUICK DISCONNECT, 1/4 X 1/4 NPT BUSHING, 1/4 NPT MALE X 1/4 NPT FEMALE ADAPTOR, 1/8 NPT MALE X 1/4 NPT FEMALE BRACKET, REGULATOR MTG. FIG. 5B PARTS-SSCON9-DRYCONTACT 14

16 SPEED SORT CONVEYOR (Fig. 6) ELECTRICAL ASSEMBLY ITEM PART NO. QTY DESCRIPTION REF ASSY, MOTOR-TUV (SEE FIG 6A) PLATE, MOTOR MOUNT GEARMOTOR, 1/8 HP 167 RPM PULLEY, TIMING 14L050 5/8B 4-4 FLAT WASHER, 1/4 5-4 BOLT, HEX HEAD, 1/4-20 X 3/ CONNECTOR, 2-POS MALE, CONTACT, PIN, AWG REF ASSY, MASTER ELECTRICAL-DRY CONTACT (FIG 6B) ASSY, ELECTRICAL BOX (NO DRAWING) ENCLOSURE, ELECTRICAL COVER, ENCLOSURE MOTOR CONTROLLER, 90V DC TRANSFORMER, 24 VAC TERMINAL STRIP, 12-CONNECTION I/O BOARD CONNECTOR, 2-POS PLUG, CONNECTOR, 2-POS RECEPTACLE, CONNECTOR, 3-POS PLUG, CONNECTOR, 3-POS RECEPTACLE, CONNECTOR, 4-POS RECEPTACLE, CONNECTOR, 6-POS PLUG, CONTACT, PIN, AWG CONTACT, SOCKET, AWG CONTACT, SOCKET, AWG FINISHING PLUG, 7/8 HOLE FINISHING PLUG, 1-1/8 HOLE STRAIN RELIEF, 3/ ASSY, TRIGGER SENSOR (NO DRAWING) SENSOR, PHOTOELECTRIC TRIGGER CONNECTOR, 4-POS PLUG, CONTACT, PIN, AWG PARTS-SSCON9-DRYCONTACT 15

17 ITEM PART NO. QTY. DESCRIPTION ASSY, CABLE, POWER INLET (NO DRAWING) RECEPTACLE, FLANGED, 3-PIN CIRCUIT BREAKER, 1 AMP CONNECTOR, 3-POS RECEPTACLE, CONTACT, SOCKET, AWG ASSY, POWER CABLE (NON-TUV) (NO DRAWING) PLUG, 3 PIN, 2 POLE, 15A, 115V PLUG,HUBBEL, 3 PIN, 1 POLE, FT WIRE, 16/3, SJOOW BLACK ASSY, CABLE, DRY CONTACT (NO DRAWING) RECEPTACLE, SQ FL, 4-POS FEMALE CONNECTOR, 6-POS RECEPTACLE, CONTACT, SOCKET, AWG CONTACT, SOCKET, AWG ASSY, 10K SPEED POT (NO DRAWING) SPEED POT, 10K CONNECTOR, 3-POS PLUG, CONTACT, PIN, AWG ASSY, 1 MEG SPEED POT (NO DRAWING) SPEED POT, 1 MEG CONNECTOR, 2-POS RECEPTACLE, CONTACT, SOCKET, AWG KNOB, POTENTIOMETER DIAL, SPEED POT FINISHING PLUG, 7/8 HOLE FINISHING PLUG, 1-1/ ASSY, CABLE, MOTOR POWER (NOT SHOWN) CONNECTOR, 2-POS RECEPTACLE, CONNECTOR, 2-POS PLUG, CONTACT, SOCKET, AWG CONTACT, PIN, AWG FT CABLE, SHIELDED, 18/3 PARTS-SSCON9-DRYCONTACT 16

18 FIG. 6A PARTS-SSCON9-DRYCONTACT 17

19 FIG. 6B PARTS-SSCON9-DRYCONTACT 18

20 tl PARTS-SSCON9-DRYCONTACT 19