Universal Platform. 282 Model Section 5. Platform Parts Breakdown Retractable Finger Auger Parts Breakdown
|
|
- Neal Richard Poole
- 5 years ago
- Views:
Transcription
1 Universal Platform 282 Model Section 5 Platform Parts Breakdown Retractable Finger Auger Parts Breakdown Combine Pickup Head Parts Breakdown Return to this page by clicking the upper right corner of any page in this section. Revised January,
2 2 4 Universal Platform 282" Model
3 UNIVERSAL PLATFORM 282 UNIVERSAL PLATFORM Item No. Part No. Qty Description Platform Main Frame 282 Model Inner End Shield Plate R.H. Inside Shield Angle L.H. Inside Shield Angle R.H. Auger Hold Arm L.H. Auger Hold Arm Auger Bearing Adjustment Plate /8 Flange Bearing RH Vertical Adjustment Support Arm LH Vertical Adjustment Support Arm /2" x 6 Rod End Auger Float Spring (11-1/2 LG) # 60 Regular Chain Sprocket, 60SH Bushing, SH x 1-3/ Sprocket, 60SF Bushing, SF x 1-3/ Double Idler Mount Double Idler Pilot Bushing (1 O.D. 2 lg.) Idler Sprocket (11 tooth) Chain Guard RH Clean Off Angle (282 Model) LH Clean Off Angle (282 Model) Front Clean Off Angle (282 Model) RH Knife Mount LH Knife Mount Center Knife Mount /8 Pillow Block Bearing Spline Shaft (32 w/keyway) Drive Shaft Shield Driveline, 1-3/8 21 Spline Yoke to 6-Spline Radial Pin Clutch (40) Radial Pin Clutch Cross and Bearing Kit Yoke, 1 3/8 21 Spline (Standard) 34a Yoke, 1 1/8 Hex (Optional) 34b Yoke, 1 3/8 6 Spline (Optional) Hitch Pin Wear Plate Finger Adjustment Lock Assembly Auger Finger Adjustment Plate LH Pickup Head Top Support Angle RH Pickup Head Top Support Angle Universal Platform Stand Assembly Revised December,
4 Universal Platform Retractable Finger Auger 282" Model
5 Retractable Finger Auger 282 Model UNIVERSAL PLATFORM Item No. Part No. Qty Description Retractable Finger Auger Weld Assembly Finger Clamp Assembly S Steel Auger Finger Steel Auger Finger Guide Finger Guide Retainer RH Idler Bearing Bar Finger Crank Offset Arm Assembly Finger Crank Center Shaft pr Flangette, 85MS Bearing, 1 1/4 Square LH Idler Bearing Bar (246 Model) Idler Bar Lock Plate Assembly Auger Finger Adjustment Plate Access Hole Inspection Cover Complete Retractable Finger Auger Assembly (Not Shown) Roller Carriers Not Shown Auger Carrier (Drive-end keyed) Revised December,
6 Non - Drive End Finger Rod Plugs DETAIL "A" Pickup Head Parts 4 A B A B C 8 Right End 7 C 5 Left End Finger Rods ( not to scale with the rest of the Detail "A" inset ) Shadow copy of Part Number See Detail "A" See Detail "A" TORSION COMBINE PICK-UP HEAD ASSEMBLY (24 ft. Model Shown) 66 6
7 Torsion Combine Pickup Head (282 model) UNIVERSAL PLATFORM Item No. Part No. Qty. Description R.H. Pickup Tube Weld Assembly (w / 5 spiders) 138-3/ L.H. Pickup Tube Weld Assembly (w / 5 spiders) 138-3/ R.H. Hex Roller (4-3/4 Key) 13-1/ L.H. Hex Roller (2-1/2 Key) 13-1/ R.H. 4 Roller (No Key) 13-1/ L.H. 4 Roller (2-1/2 Key) 13-1/ R.H. Rotor Rod Mount / L.H. Rotor Rod Mount / R.H. Torsion Bar 142-/ L.H. Torsion Bar 142-/ R.H. Hold Down Rod Mount 140-1/ L.H. Hold Down Rod Mount 140-1/ Complete R.H. Pickup Head Assembly (w / Bearings, Finger Tubes & Fingers) Complete L.H. Pickup Head Assembly (w / Bearings, Finger Tubes & Fingers) R.H. Pickup Head Spacer Center Support Plate Yoke, Driveline (1-1/4 ID with 1/4 Keyway) U-joint, Driveline Yoke, Driveline (1-3/8 I.D. 6 Spline) Canister Bearing Mount Splined Shaft L.H. Pickup Head Spacer Bearing, 1-3/8 I.D. (with 2 Snap Rings) Pivot Bushing Plate Center Pivot Plate R.H. Knife Mount L.H. Knife Mount Center Hinge Bracket R.H. 4 Roller Spacer R.H. Hex Roller Spacer L.H. 4 Roller Spacer L.H. Hex Roller Spacer Rotor Rod Center Torsion Plate Center Torsion Plate Spacer Bottom Carrier Plate (shipping bracket) Top Carrier Plate (shipping bracket) Roller Carrier Plate (shipping bracket) Cam Track (universal) Pickup Head Spacer (3-2/32 lg.) R.H. Outside Upper Plate L.H. Outside Upper Plate R.H. Outside Lower Plate Revised February,
8 Torsion Combine Pickup Head (282 model) continued Item No. Part No. Qty. Description L.H. Outside Lower Plate R.H. Side Plate Deflector Rod L.H. Side Plate Deflector Rod R.H. Hinge Bracket Bottom Plate R.H. Hinge Bracket Top Plate L.H. Hinge Bracket Bottom Plate L.H. Hinge Bracket Top Plate R.H. Upright Angle (17-Present) L.H. Upright Angle (All Models) Upper Chain Bracket UNIVERSIAL PLATFORM Lift Chain (1/4 ) pr. Two Hole Flangette, (fits 1-1/4 ID & 1-3/8 ID Bearing Inserts) Bearing, 1-1/4 Insert with lock collar pr. Three Hole Flangette, (fits 1 ID Bearing Inserts) Bearing, 1 Insert with lock collar Two Hole Flangette, (fits 1 ID Bearing Inserts) Bearing, 1-3/8 Insert with lock collar R.H. Roller Shroud L.H. Roller Shroud Chain Guard Chain Guard R.H. Gauge Wheel Arm (requires swivel pin # 4022) L.H. Gauge Wheel Arm (requires swivel pin # 4022) Wheel Fork Assembly (Wide Frame) (17-Present) Wheel Fork Axle (requires 1 NF Castellated Hex Nut & 1/4 Roll Pin) Steel Wheel 8 x 7 (5 on 4.5) Tire (18 x.5 8) Wheel Assembly (Complete) (items: 68 & 6) Spring Mount Lock Bushing Wheel Mount Spacer (1/2 ) Wheel Mount Spacer (1 ) Wheel Mount Spring Wheel Fork Spring Mount Straddle Hub (includes items: 77, 78 & 7) Straddle Hub Bearing cone Straddle Hub Bearing cup Hub Seal Bushing, Spacer 4-1/8 long Bushing, Spacer 3 -/16 long Sprocket, 50 Q60 Taper Lock (SK Series) Sprocket, 1-1/4 Taper Lock Hub (SK Series) Hydraulic Motor (MF Series) 8 Revised February, 2014
9 Torsion Combine Pickup Head (282 model) continued Item No. Part No. Qty. Description 84a. 11 Seal Kit for Item x 3 Split Coupler Hydraulic Motor Mount Sprocket, 50BTB15H Taper Lock Bushing, 12 1 KW Taper lock Idler Sprocket (5013E) Idler Sprocket Mount Sprocket 40TBT17H Taper lock (2013 Present) 1a Sprocket, 40BTB30H Taper lock ( ) Bushing, 12 1 KW Taper lock (2013 Present) 2a Bushing, 16 1 KW Taper lock ( ) Idler Sprocket (4017E08) Idler Sprocket Mount Chain Guard Mount Sprocket, 40BTB17H Taper Lock Rotor Rod (End Only) Rotor Rod Rotor Rod Clip (3 hole) Rotor Rod Clip (2 hole) (End Only) Hold Down Rod LH 8 L.H. Cam Arm (Threaded) RH 8 R.H. Cam Arm (Threaded) Shaft, L.H. Long Finger Offset Shaft, L.H. Short Finger Offset Shaft, R.H. Long Finger Offset Shaft, R.H. Short Finger Offset Bearing, Cam Arm Finger Rod 2-3/8 (8 Holes) Finger Rod 33-3/8 ( Holes) End Stub Shaft (long) End Stub Shaft (short) Coupler, Finger Rod Chain, 50 Roller (80 pins) Chain (40 pins or 20 links) (2013 Present) 115a Chain (47 pins or 1/2 links) ( ) Shock, Gas Charged (2013 Present) UNIVERSIAL PLATFORM Hardware List Item No. Part No. Qty. Description A. 16 7/16 x 2-1/4 NF Hex Bolt (Grade 8) B. 16 7/16 Lock Washer C. 16 5/8 NF Jam Nut Revised February, 2014
Combine Pickup Heads
Combine Pickup Heads Torsion Combine Pickup Heads Section 6 30 ft. Torsion Combine Pickup Head... 2-5 24 ft. Torsion Combine Pickup Head... 6-9 Return to this page by clicking the upper right corner of
More informationUniversal Platform. 222 Model Section 3. Platform Parts Breakdown (1997 Present) Retractable Finger Auger Parts Breakdown...
Universal Platform 222 Model Section 3 Platform Parts Breakdown (1997 Present)... 2-4 Retractable Finger Auger Parts Breakdown... 5-6 Combine Pickup Head Parts Breakdown (1997 Present)... 7-10 4 Tube Pickup
More informationUniversal Platform. 246 Model Section 4. Platform Parts Breakdown (1997 Present) Retractable Finger Auger Parts Breakdown...
Universal Platform 246 Model Section 4 Platform Parts Breakdown (1997 Present)... 2-4 Retractable Finger Auger Parts Breakdown... 5-6 Combine Pickup Head Parts Breakdown (1997 Present)... 7-10 4 Tube Pickup
More informationCombine Pickup Heads
Combine Pickup Heads 164 Model Section 3 Model Years 1991 1996... 2-5 Pickup Head Layout 1994 1996... 6-7 Model Years 1997 1999 (1 PUH Bearings)... 8-10 4 Tube Pickup Head Layout 1997 1999... 11-12 Model
More informationCombine Pickup Heads
Combine Pickup Heads 124 Model Section 1 Model Years 1991 1996... 2-5 Pickup Head Layout 1994 1996... 6-7 Model Years 1997 1999 (1 PUH Bearings)... 8-10 4 Tube Pickup Head Layout 1997 1999... 11-12 Model
More informationOne Step Rod Cutter Rear Pull
One Step Rod Cutter Rear Pull Drivelines Section 13 Model Years 1988 1991 (Secondary Driveline) 1 Solid Shaft... 2-5 Model Years 1988 1992 (Primary Driveline) G & G... 6-11 Model Year 1992 (Secondary Driveline)
More informationDouble Master Plus Combine
Pickup Head Section 3 Pickup Head Straight Pull (2001 20)... 2-7 Pickup Head DMP SP2 (2006 2008)... 8-10 Pickup Head DMP SP2 (20 2014)... 11-13 Pickup Head DMP & DMP SP (2010 2014)... 14-16 Pickup Head
More informationOne Step Ahead Rod Cutter (Front Mount Unit)
One Step Ahead Rod Cutter (Front Mount Unit) Pickup Head Layouts Section 7 Model Years 1992 1993... 2-3 Model Years 1994 1996... 4-5 Model Years 1997 Present (4 Tube)... 6-7 Model Years 1997 2013 (8 Tube)...
More informationOne Step Ahead Rod Cutter (Front Mount Unit)
One Step Ahead Rod Cutter (Front Mount Unit) Pickup Head Gear System (LH End View) Section 6 Model Years 1992 1998... 2-3 Model Years 1998 1999 (1 PUH Bearing)... 4-6 Model Years 1998 2012 (1 1/4 PUH Bearing)...
More informationOne Step Ahead Rod Cutter (Front Mount Unit)
One Step Ahead Rod Cutter (Front Mount Unit) Front Gauge Wheels Section 4 Model Years 1992 1994... 2-5 Model Years 1995 1996... 6-9 Model Years 1997 Present... 10-11 Front Gauge Wheel Divider 1992 Present...
More informationMain Frame (1,676 MM (5-1/2 FT.) Hay Pickup)
Main Frame (,676 MM (5-/2 FT.) Hay Pickup) 2 E34250 STRIPPER 2-3000 AUGER E66297 ANGLE 2 300- AUGER, (SUB FOR E34496) (SUB E9572) E9572 ANGLE 2 AUGER E6905 TUBE 59400-86 Pickup Heads Strippers (,676 MM
More informationTwin Master Combine. Threshing Cylinder Section 1. Threshing Cylinder ( ) Threshing Cylinder (2009 Present)...
Threshing Cylinder Section 1 Threshing Cylinder (2006 2008)... 2-8 Threshing Cylinder (2009 Present)... 9-15 Return to this page by clicking the upper right corner of any page in this section. Revised
More informationMODELS 470, 570, 670, 770 Corner Auger GRAIN CART (For Model 970 Information, Refer to Manual #250541)
OPERATOR S MANUAL PARTS CATALOG MODELS 470, 570, 670, 770 Corner Auger GRAIN CART (For Model 970 Information, Refer to Manual #250541) PART NO. 250611 200026 Late Model 70 Series 290374 Early Model 70
More informationPart s Catalog. GT2100 Garden Tractor. Model No. 14AP80RP744. Original Instructions (EN) (01/31/06)
Part s Catalog GT0 Garden Tractor Model No. AP0RP Original Instructions (EN) -0 (0//0) Model P0RP -0-00 Turf Tire, x. x -0-00 Rim,.0 x.0-00 Lug Nut, /- -00A-0 Wheel Assembly, x. x -00-00 Rim Assembly,.0
More informationLAND MAINTENANCE REPAIR PARTS MANUAL BUSH HOG MODEL: 307 SECTION: 16
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 SECTION: P.O. Box 0 Selma, AL 0-0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL SEPTEMBER, 0
More informationTwin Master Combine. Transmission & Gear Boxes Section 8. 2 Speed Transmission Transmission Gear Shift
Twin Master Combine Transmission & Gear Boxes Section 2 Speed Transmission... 2-4 Transmission Gear Shift... 5-6 PTO Swivel Gear Box 107021... 7- Transition Auger Gear Box 107026... 9-10 Straw Chopper
More informationModel 912 / 922 AUGER HEADER and Model 722 HAY CONDITIONER Model 933 Grass Seed Special AUGER HEADER
Model 912 / 922 AUGER HEADER and Model 722 HAY CONDITIONER Model 933 Grass Seed Special AUGER HEADER PARTS CATALOG Form 46619 Issue 01/06 Sugg. Retail: $15.00 Inside Front Cover (blank) Models 912, 922
More information1 RS-300/D 320/D 340/D 350H Parts Manual
300/D 320/D 340/D 350H Parts Manual Table Of Contents Three Point Hitch / Hitch Frame Assembly... 3 Tongue Pull Hitch Assembly... 7 Main Gearbox... 11 Crank Handle & Gear... 13 Hydraulic Lift... 15 Rotor
More informationModel 960 Double Delivery and Triple Delivery HARVEST HEADERS PARTS CATALOG
Model 960 Double Delivery and Triple Delivery HARVEST HEADERS PARTS CATALOG with Adapters for: Model 7000 Self-Propelled Windrower Model 9000 Self-Propelled Windrower John Deere 7720, 8820, 9500, 9600
More information250P Manure Spreader
0P Manure Spreader Illustrated Parts Breakdown Page - Page Page Page Page Page Page Page Page Page Page Page Page Page Page - Page Page Page 0 Complete Front End PTO/Jack/Hitch Assembly Front Pulley Assembly
More information1 HR-301/D Parts Manual. Table Of Contents
Table Of Contents 301/D Parts Manual 3 Point Hitch...2 Pull-Type Hitch...4 Main Frame...6 Angle Adjuster - Serial Number 44982 & Prior...8 Rotor Assembly - Serial Number 44982 & Prior...10 Rotor Assembly
More informationLoader Backhoe Front Axle Parts 2WD & 4WD
Loader Backhoe Front Axle Parts 2WD & 4WD SECTION G LOADER BACKHOE FRONT AXLE PARTS CASE 2WD AXLE PARTS G2 - G5 CARRARO APPLICATIONS G6 - G25 FRONT AXLE KITS G23 - G25 CASE POWER STEERING VALVES & PUMPS
More informationBUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 280 SERIES SECTION: 59
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 SERIES SECTION: P.O. Box 0 Selma, AL 0-0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL JUNE,
More informationM K Martin Enterprise Inc. Price Lists Snowblower Parts for Farmco Distributors. Item No. Description List Price Inner Tube Roll PIn
M K Martin Enterprise Inc. Price Lists Snowblower Parts for Farmco Distributors Item No. Description List Price 519-000-011 Inner Tube Roll Pin $1.03 519-000-012 Outer Tube Roll Pin $1.03 519-000-014 Inner
More informationTRANSPORT AUGER TUBE / UNDERCARRIAGE / DRIVE COMPONENTS. INDEX Section L
INDEX Section L TRANSPORT AUGER TUBE / UNDERCARRIAGE / DRIVE COMPONENTS TRANSPORT AUGER TUBE / UNDERCARRIAGE/ TF WHEEL MOVE L Description Page TF3, TF3, TF03, TF03 Basic Auger...L-3 TF, TF0 Basic Auger...L-
More informationPARTS MANUAL THIS PAGE INTENTIONALLY LEFT BLANK. Ag-Bag International, Ltd. G7000 June Appendix A
The parts manual is organized into groups, it is designed to make the locating of parts easier. The exploded drawings also show assembly paths. All parts listed are available from your authorized Ag-Bag
More informationBUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: TD-1100 SECTION: 66
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: TD-00 SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL JUNE, 00
More informationBUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 280 SERIES SECTION: 59
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 SERIES SECTION: 0 Griffin Ave. Selma, AL 0 () () 00 Parts Ordering 00 0 Fax 00 www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL October, 0 0
More informationChain Box and Knife. Item # Description Part Number 180-D & GS
Chain Box and Knife Item # Description Part Number 180-D & GS 1 Groove pin 2275-03160 2 Hex cap screw 2175-03061 3 Washer 2275-03060 4 Setscrew 2175-07163 5 Chain box 4975-00355 6 Berkel logo 3175-00152
More informationPARTSBOOK. This part of the manual contains part numbers and illustrations based on the latest information available at the time of print.
2 PARTSBOOK This part of the manual contains part numbers and illustrations based on the latest information available at the time of print. Hall Manufacturing, Inc. reserves the right to make changes at
More informationMulching and Finishing Mowers MP and FP
Mulching and Finishing Mowers MP and FP Parts Manual Locke Turf 0 Highway E, Opp, Alabama, () -00 Transport Wheel, Tire & Spindle MP and FP ALPHABETICAL INDEX CONTENTS PAGE 00 Hydraulic Cylinder (Rear)
More information365L (2001) Page 1 of 36 54" Deck Assembly
365L (2001) Page 1 of 36 54" Deck Assembly 365L (2001) Page 2 of 36 54" Deck Assembly 1 720-0241 1 S Wing Nut Knob 2 703-2817 1 Belt Cover LH 3 703-2816 1 Belt Cover RH 4 747-3306 1 Idler Spring Mounting
More informationModel 802 Center Mount Adapter For New Holland 9030 & TV140 Bi-Directional Tractors PARTS CATALOG
Model 802 Center Mount Adapter For New Holland 9030 & TV140 Bi-Directional Tractors 1 PARTS CATALOG TABLE OF CONTENTS Frame & Tractor Linkage...2,3 Header Linkage & Float Group...4,5 Header Drive Hydraulics
More informationA-Series A30-S and A30-D Pull-Type Mower Conditioners / A30-S, A30-D, and A40-D Self-Propelled Windrower Headers
A-Series A30-S and A30-D Pull-Type Mower Conditioners / A30-S, A30-D, and A40-D Self-Propelled Windrower Headers Parts Catalog 147911 Revision A Original Instruction The harvesting specialists. MacDon
More informationHR24TS Rotary Rake. Serial Numbers and higher. Illustrated Parts Breakdown. Guards and Guard Arm, Front Hay Curtain Mount.
HRTS Rotary Rake Serial Numbers 00 and higher Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page 0 Page Page Page Page Page Page Page Page Page Page 0 Tongue Front Frame Guards
More informationBUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 405 / 406 SECTION: 17
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 / 0 SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL SEPTEMBER,
More informationEUROPEAN REAR ENGINE RIDER SERIES 20
Parts Manual for EUROPEAN REAR ENGINE RIDER SERIES 20 MODEL E281320BE E331520KVE McDonough, GA, 30253 U.S.A. Briggs & Startton Yard Power Products Group Copyright 2006 Briggs & Startton Corporation Milwaukee,
More informationDEBRIS BLOWER 2613 BLOWER ASSEMBLY PARTS CATALOG MODEL NO & UP. The TORO Company All Rights Reserved. FORM NO Rev.
FORM NO. 01-505-0440 Rev. D MODEL NO. 44520-20101 & UP PARTS CATALOG DEBRIS BLOWER 2613 Part 1 61-005-0073 Hitch & Lower Housing 1 2 61-005-0121 Fan Housing 1 3 61-005-0061 Fan Assembly 1 4 01-113-0070
More information320 Series Models 325, 326, 327
0 Series Models,, ROTARY MOWER Published 0/ PARTS MANUAL SECTION An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the safe operation of this machine and
More informationTT4100 Rotary Tedder
TT0 Rotary Tedder Serial numbers 0 and higher Illustrated Parts Breakdown Page Page Tongue Assembly S/N - Tongue Assembly S/N to Page Page Page Page Page Tongue Assembly S/N to Tongue Assembly S/N + Main
More informationPARTSBOOK. Hall Manufacturing, Inc E. Washington Ave., P.O. Box Drawer 5638 North Little Rock, AR (501)
540 RPM 2 PARTSBOOK This part of the manual contains part numbers and illustrations based on the latest information available at the time of print. Hall Manufacturing, Inc. reserves the right to make changes
More informationX Dodge / Chrysler /2. Model 44 /216 Disconnect Front Axles for. W1500 and W2500 Ram
Dodge / Chrysler 1994-1998 1 /2 Model 44 /216 Disconnect Front Axles for W1500 and W2500 Ram 15 Exploded View 16 Parts Listing ITEM NO. PART NUMBER DESCRIPTION 1 (3) Housing Axle Service 2 (1) Drive Pinion
More informationREAR ENGINE RIDER EUROPEAN SERIES 22
Parts Manual for REAR ENGINE RIDER EUROPEAN SERIES 22 MODELS E2822BE E2822BE E1522KVE CONTENTS DESCRIPTION PAGE(S) DESCRIPTION PAGE(S) WHEELS, TIRES...2, DRIVE DISC ASSEMBLY... 22 FRONT END, STEERING...4,
More informationPARTS CATALOG MODELS 310, 410, 610, 910 GRAIN CART. Unverferth
Unverferth Manufacturing Company, Inc. P.O. Box 357 Kalida, Ohio 45853 (419) 532-3121 FAX (419) 532-2468 Grain Carts PARTS CATALOG 290901 MODELS 310, 410, 610, 910 GRAIN CART REVISED 10-12-00 Unverferth
More informationPart s Catalog. LX500 Lawn Tractor. Model No. 13AP60RP744. Original Instructions (EN) (01/31/06)
Part s Catalog For Parts Call 0-- or 0-- LX00 Lawn Tractor Model No. AP0RP Original Instructions (EN) -0 (0//0) For Parts Call 0-- or 0-- Model P0RP NUMBER --00 Turf Tire, 0 x 0.0 x -000-00 Rim,.0 x.0-0-0
More informationReproduction. Not for. Mid Frame Dual Stage Snowthrowers. Parts Manual
Parts Manual Attachment Mfg. No. Description 1695821 (I1224E), 11.5TP 24" Dual Stage Snowthrower 1695842 (I924EX), 9TP 24" Snowthrower (CE/Export) Mid Frame Dual Stage Snowthrowers Not for Reproduction
More informationPARTS MANUAL SECTION. Models 295, 296, 297, 1297 ROTARY MOWER
0 Series Models,,, ROTARY MOWER Published 0/ PARTS MANUAL SECTION An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the safe operation of this machine and
More informationPARTS MANUAL. BXM42EU Chipper. Serial Number 1M42EU017 & up. Part Number: 1016T010
EMB Manufacturing Inc. 4144 Boomer Line St. Clements, Ontario N0B 2M0 Canada www.wallensteinequipment.com PARTS MANUAL Chipper Serial Number 1M42EU017 & up Refer to the operators manual for safe operation
More information3. FRAME 1. SAFETY 2. PREPARATION 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT
TABLE OF CONTENTS 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT FRAME 7" x 7" Stacker Bar STACKER BAR The Stacker Bar includes a heavy 3/8 wall tubing, 14
More informationMODEL NO REPAIR PARTS FRAME
FRAME 37 FRAME Key No. Part No. Description 90 198573X479 COVER, BOTTOM 91 198574 SCREW, 1/4--20X.63 103 406364X008 IDLER ASSEMBLY, AUGER 105 198576 PIN, HAIR.38DIAX1.64LG 106 198580 PIN, CLEVIS 3/16 DIA
More informationTT8101 Rotary Tedder
TT0 Rotary Tedder Illustrated Parts Breakdown Page Front End Page Page Transport Axle Assembly Cylinder Linkage Page Guards Page Page Page Page Transport Lock Assembly Lift Frame Assembly Center Tunnel
More informationBH200 SERIES ROTARY CUTTER
Revised Published01/19 BH200 SERIES ROTARY CUTTER PARTS MANUAL SECTION 121 MODELS BH215, BH216, BH217 An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the
More informationPARTS MANUAL ET60CT656SD ET60CT656SDCA ET72CT724RD ET72CT724RDCA
PARTS MANUAL ET60CT656SD ET60CT656SDCA ET72CT724RD ET72CT724RDCA 2 A DIVISION OF WORLDLAWN POWER EQUIPMENT, INC. WWW.ENCOREEQUIPMENT.COM 401 COMMERCE STREET BEATRICE, NE 68310 800-267-4255 FAX 402-223-4103
More informationTT4101 Rotary Tedder
TT Rotary Tedder 0//0 Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page Page Tongue Assembly S/N S/N - Tongue Assembly S/N + Main Frame S/N - Main Frame S/N to Main Frame S/N
More informationS/N 1H019H - 1H310H Page 1 of 33 46" Cutting Deck Assembly
1180 S/N 1H019H - 1H310H Page 1 of 33 46" Cutting Deck Assembly 1180 S/N 1H019H - 1H310H Page 2 of 33 46" Cutting Deck Assembly 1 17982 1 S Reinforcement Spindle Plate 2 618-0430 1 S Spindle Assembly w/
More informationR190 Lawn Boss 21 (1989) Page 1 of 8 Body Assembly
129-476R190 Lawn Boss 21 (1989) Page 1 of 8 Body Assembly 129-476R190 Lawn Boss 21 (1989) Page 2 of 8 Body Assembly 1 731-0609 1 Control Handle Ass'y. 3 710-0796 1 /P Truss Mach. B-Tap Scr. #12 x 1.5"
More informationBALE KING VORTEX 3110 BALE KING GREEN & DEGELMAN BALE KING YELLOW MODELS
PARTS MANUAL BALE KING VORTEX 3110 BALE KING GREEN & DEGELMAN BALE KING YELLOW MODELS MANUFACTURED BY: BRIDGEVIEW MANUFACTURING INC. P.O. BOX 4 GERALD, SASK. CANADA S0A 1B0 PHONE: (306) 745-2711 FAX: (306)
More informationCraftsman Snow Thrower Model PARTS LIST
Craftsman Snow Thrower Model 24.88955 11 13 3 26 24 9 1 18 54 6 25 15 20 23 16 5 14 1 55 9 4 4 28 8 30 2 5 56 35 36 46 3 39 50 53 43 38 48 52 42 51 41 40 49 4 44 31 45 31 21 29 34 9 19 10 32 22 26 Craftsman
More informationMOBILE MIXERS PARTS MANUAL HIGH ROUGHAGE, STATIONARY, TRUCK & TRAILER MODELS. Serial number up to
MOBILE MIXERS PARTS MANUAL 405-470 - 540 HIGH ROUGHAGE, STATIONARY, TRUCK & TRAILER MODELS Serial number up to Harsh International, Inc. 600 Oak Ave. Eaton, CO 80615-0007 (970) 454-2291 Fax: (970) 454-3491
More informationMT (10/19/07) Rev. 02 PARTS MANUAL
MT1741210 (10/19/07) Rev. 02 PARTS MANUAL Table Of Contents PRODUCT COMPONENTS PAGES Engine... 4 Frame... 6 Drive... 8 Auger Housing... 10 Discharge Chute... 12 Handle Assembly... 14 Shift Yoke... 16
More information13AU609H063 (1999) Page 1 of 25 Axle & Wheels Front And Steering Assembly
13AU609H063 (1999) Page 1 of 25 Axle & Wheels Front And Steering Assembly 13AU609H063 (1999) Page 2 of 25 Axle & Wheels Front And Steering Assembly 1 683-0304 1 S Frame 2 710-0604A 1 /P Self-tapping Screw,
More informationReel Mower TRM Parts Manual. Locke Turf 307 Highway 52E, Opp, Alabama 36467, (334)
Reel Mower TRM-0 Parts Manual Locke Turf 0 Highway E, Opp, Alabama, () -00 General Information Mower Layout Please note that Left and Right are determined by standing at eh rear of the mower and facing
More informationTEREX Woodsman 730 BRUSH CHIPPER
Woodsman 730 BRUSH CHIPPER Parts Manual Customer Dealer S/N Frame # Date Woodsman 150 Commerce Drive, Farwell MI 486 Phone: (800) 953-553 Fax: (989) 588-487 Flipper Discharge Chute Hand Crank Belt Shield
More informationHydrostatic Zero-Turn Commercial Riding Mower
Hydrostatic Zero-Turn Commercial Riding Mower Professional Turf Equipment 54" Fabricated Deck ILLUSTRATED PARTS LIST TABLE OF CONTENTS Frame Assembly.................................. 3 54" Fabricated
More informationIllustrated Parts & Packing List & Instructions 815 Rice Lake Street, Owatonna, MN 55060
Illustrated Parts & Packing List & Instructions 815 Rice Lake Street, Owatonna, MN 55060 Great Plains Part #891-561C (Gandy Part #6245DS-GP) For Great Plains Turbo-Max 2400, 3000, 3500 & 4000 Models 45
More informationOPTIONAL EQUIPMENT. Section F INDEX
INDEX Section F OPTIONAL EQUIPMENT Description Page Inclined hopper, H08-/ and H-/... F2- Straight hopper, SWH...F Swivel arc kit, A...F Wheel kit, H08-, H- and H1-...F Inclined hopper, S08-/, S-/ and
More informationReel Mower TRM 5138 and TRM 7192
Reel Mower TRM and TRM Parts Manual Locke Turf 0 Highway E, Opp, Alabama () -00 General Information Mower Layout Please note that Left and Right are determined by standing at eh rear of the mower and facing
More informationPARTS CATALOG MODELS 320, 420, 520, 620, 820 GRAIN CART. Unverferth
Unverferth Manufacturing Company, Inc. P.O. Box 357 Kalida, Ohio 45853 (419) 532-3121 FAX (419) 532-2468 Grain Carts PARTS CATALOG MODELS 320, 420, 520, 620, 820 GRAIN CART Unverferth Manufacturing Co.,
More informationDrive End Bracket & Bearing. Drive End Bracket. Tandem Axle # #865733
Drive End Bracket & Bearing #865089 1 06409700 1" Lock Collar 2 865733 Drive Bracket w/ Bearing 3 310037 End Drive Shaft Drive End Bracket #865733 1 03003100 Bearing 1" w/snap Ring 2 957795 Drive End Bracket
More informationReproduction. Not for. Mid Frame Dual Stage Snowthrower. Parts Manual
Parts Manual Attachment Mfg. No. Description 1695994 (I924EX), 9TP 24" Snowthrower (CE/Export) Mid Frame Dual Stage Snowthrower Not for Reproduction Manual Part No. Revision - Rev. Date: 7/20/2011 Table
More informationPARTS LISTS AND DIAGRAMS
PARTS LISTS AND DIAGRAMS Duetz-Allis Gleaner Combine Crary Company 237 NW 12th St. PO Box 849 West Fargo, ND 58078-0849 (800)247-7335 FAX: (701)282-9522 www.crary.com Part #12088 Companion to Part #12071
More informationService Updates. DMP & Twin Master Combines Section 10. Transmission with Offset Pull Tongue (405036) 2001 to
Service Updates DMP & Twin Master Combines Section 10 Transmission with Offset Pull Tongue (405036) 2001 to 2005... 2-3 Transmission with Mounting Kit (405037) 2001 to 2005... 4-5 Transmission Mounting
More informationCOUNTER SHAFT NUT LOCKING PLATE 1 $ HOIST DRUM CLUTCH EYE BOLTS 1 $ LEFT DRUM CLUTCH THREADED PIN 2 $ 138.
1 2184 PULLEY FOR RADIATOR FAN 1 $ 326.25 2 2184 PULLEY FOR RADIATOR FAN 1 $ 326.25 3 3331 REAR DRUM BRAKE RETURN SPRING 5 $ 51.31 5 10285 LEFT REAR DRUM BRAKE AIR CAN REACH ROD ( LONG ROD ) 1 $ 85.12
More informationROTARY RAKE PARTS BOOK MODEL E
ROTARY RAKE PARTS BOOK MODEL 1150 17.00803E This parts book is furnished for your convenience only. All parts must be purchased through an authorized dealer. Call us for a dealer near you. Issue Date:
More information1 KW-880 Parts Manual
Headstock... 2 Hitch Beam... 4 Central Gearbox... 6 Central Gearbox... 8 Intermediate Beam... 10 Intermediate Beam... 12 Intermediate Beam Outside... 14 Intermediate Beam Outside... 16 Outer Support Tube...
More informationParts List. Model Reproduction. Not for Revision B
Parts List Model 1695539 1737492 Revision B Rev. Date 10/2009 Table Of Contents PRODUCT COMPONENTS PAGES Engine... 4 Frame... 6 Drive... 8 Auger Housing... 10 Discharge Chute... 12 Handle Assembly...
More information72K850ZP PARTS MANUAL
7 2 K 8 5 0 Z P PARTS MANUAL 72 MID-CUT GAS ENGINE OPTION SECTION 72 MID-CUT DECK ASSEMBLY 72" Mid-Cut Deck Assembly # PART NO. QTY DESCRIPTION 1 582096 1 72" MC DECK WELDMENT 2 582098 1 72" DECK CHANNEL
More informationSERIAL NUMBERS
J.E. LOVE COMPANY TREE SEEDLING HARVESTER SERIAL NUMBERS 103-114 FORESTRY PRODUCTS GROUP P.O. BOX 188 GARFIELD, WA 99130-0188 PHONE: (509) 635-1321 FAX: (509) 635-1434 Manufacturers of Special Harvesting
More informationPage 1 of 7 Section 05-03A: Axle, Front Drive, Dana Models 44 and 50 1996 Bronco/F-Series Workshop Manual DESCRIPTION AND OPERATION Procedure revision date: 06/19/2000 Hubs, Automatic Lock Refer to Section
More informationPARTS LIST. Reproduction. Not for. Models. Mfg. No. Description MH61900, Murray 9TP 24" Dual Stage Snowthrower, CE (2011)
PARTS LIST Models Mfg. No. Description 1696060 MH61900, Murray 9TP 24" Dual Stage Snowthrower, CE (2011) Manual Part No. Revision A Rev. Date: 6/20/2011 Table Of Contents PRODUCT COMPONENTS PAGES Handles
More informationSUPER 248BDH WITH BRUSHES
SUPER 248BDH WITH BRUSHES PAGE DESCRIPTION NUMBER..1...2...3..4 B 5..6 A.7..7 A 8.9...10..11 & 12....13 B.... 14 B....15C.....16 B 17 Thru 23.24.25A.26 27 28.29... 30 31 32 Front Air Damper.. Back Air
More informationREAR ENGINE RIDER 42 MOWER SERIES 22
Parts Manual for REAR ENGINE RIDER MOWER SERIES MODELS 1BVE CONTENTS DESCRIPTION PAGE(S) DESCRIPTION PAGE(S) WHEELS- TIRES... - FRONT END, STEERING.... - MAIN CASE... - DIFFERENTIAL, R. H. FENDER... 8-9
More information33 COMPACT DISC Ref. No. Part Name Part Number
CONTENTS CONTENTS 33 COMPACT DISC Ref. Part Name Part Number 1 Tire & Rim 168025 2 Disc Axle 401036 3 Plastic End Cap (Pkg. 2) 504090 4 Sealed Bearings & Flanges 504125 5 Bearing Stand Bolt Pkg. (2-U-Bolts)
More informationModel 872 COMBINE ADAPTER PARTS CATALOG
Model 872 COMBINE ADAPTER PARTS CATALOG 1 CONTENTS Frame and Float Group... 2-5 Hydraulics... 6 9 Gear Drive... 10, 11 Feed Draper & Deck... 12-15 Retracting Tine Drum... 16, 17 John Deere Combines Adapter
More informationLARGE FRAME REAR TINE TILLERS SERIES 2
Parts Manual for LARGE FRAME REAR TINE TILLERS SERIES 2 MODEL R5002B R5002R R8002B R8002BE RT5 RT5X RT8 RT8S McDonough, GA, 30253 U.S.A. COPYRIGHT 2006 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED. Revision
More informationTT6101 Rotary Tedder
TT0 Rotary Tedder 0/0/0 Illustrated Parts Breakdown Page Chassis Assembly Page Page Transport Axle Assembly S/N - Transport Axle Assembly S/N + Page Page Page Page Page Transport Lock Assembly Lift Frame
More informationFX140 & FX140R Skidding Winch Parts Manual
EMB Manufacturing Inc. 4144 Boomer Line St. Clements, On N0B 2M0 Canada Ph: (519) 699-9283 Fax: (519) 699-4146 www.wallensteinequipment.com FX140 & FX140R Skidding Winch Parts Manual S/N 514094 & After
More informationModels 820 and 840 2
Models 820 and 840 2 Models 820 and 840 1 783-0250 Hood 2 738-0952 Shld. Bolt.375" Dia. x.5" 3 736-0175 Spr. Washer.265" I.D. x.562" OD 4 710-0751 Hex Bolt 1/4-20 x.62" * 6 7-0271 Hex Sems Nut 1/4-20 Thd.
More informationFX90 Skidding Winch Parts Manual S/N and After
Z9056 FX90 Skidding Winch Parts Manual S/N 5906 and After Foreword EMB Mfg. has prepared this parts manual to assist customers in ordering quality OEM replacement parts. Proper and regular service and
More informationParts Manual DX272 / Please read the operator s manual carefully and make sure you understand the instructions before using the machine.
Parts Manual DX22 / 966651501 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. Gasoline containing up to 10% ethanol (E10) is acceptable
More informationPart s Catalog. LX420 & LX460 Lawn Tractors. Model No. 13AX60RG744 Model No. 13AX60RH744
Part s Catalog For Parts Call 0-- or 0-- LX0 & LX0 Lawn Tractors Model No. AX0RG Model No. AX0RH Original Instructions (EN) -0 (0//0) Models X0RG & X0RH --00 Turf Tire, 0 x.0 x -000-00 Rim,.0 x.0-0-0 Wheel
More informationAllCropHarvester.com. New/New Old Stock List as of 03/04/2016
AllCropHarvester.com New/New Old Stock List as of 03/04/2016 If your part is not listed, please contact us. We may be able to get it, and/or have it as a used part. Contact us for prices not listed/used.
More informationRM42G MOWER Deck and Chute... 5 Spindles, Belts and Pulleys... 7 Mounting Brackets and Axle... 9 Decals... 39, 41
RM42G RM38, RM44, RM48 R Ingersoll RM42G MOWER Deck and Chute... 5 Spindles, Belts and Pulleys... 7 Mounting Brackets and Axle... 9 Decals... 39, 41 RM38, RM44, RM44GR, RM48 MOWER Deck, Belts, Backside
More information136R616G190 Lawn Tractor FST-16 (1996) Page 1 of 27 42" Mowing Deck
136R616G190 Lawn Tractor FST-16 (1996) Page 1 of 27 42" Mowing Deck 136R616G190 Lawn Tractor FST-16 (1996) Page 2 of 27 42" Mowing Deck 3 97600A 1 S 42" Deck Ass'y. Code: N notates a new part (not previously
More informationModel Series E6A5E, E645E & E665E
Model Series EAE, EE & EE 0. -0 Housing R.H. -0 Housing L.H.. 0-0 Hex Screw /- x.. -0A Spiral Axle -00A Spiral Axle. -0 Key. -0 Pin-Spiral. -0 Shaft-Worm. -0 Gear-Worm. -0 Collar-Thrust. -0 Plug 0. -0
More information25 Horsepower Hydrostatic Zero-Turn Commercial Riding Mower
MMZ 2, 260 2 Horsepower Hydrostatic Zero-Turn Commercial Riding Mower ILLUSTRATED PARTS LIST " Float Cutter Deck - Figure 1 3 1 27 32 17 6 1 11 31 36 3 19 7 23 1 33 38 18 37 22 3 20 2 10 2 12 21 30 39
More informationREPAIR PARTS SNOW THROWER - MODEL NUMBER AUGER HOUSING / IMPELLER ASSEMBLY
REPAIR PARTS SNOW THROWER - MODEL NUMBER 0000 AUGER HOUSING / IMPELLER ASSEMBLY 3 7 8 7 3 37 7 38 7 0 3 3 7 8 33 8 3 3 3 0 3 8 3 8 0 7 7 30 8 0 7 38 REPAIR PARTS SNOW THROWER - MODEL NUMBER 0000 AUGER
More informationBEFCO. Parts Manual GREEN-RITE. One Pass Overseeder-Aerator and/or Seeder-Cultivator with Corrugated Roller for Lawn and Turf Operations
BEFCO Parts Manual GREENRITE One Pass OverseederAerator and/or SeederCultivator with Corrugated Roller for Lawn and Turf Operations GRT50 50, GRT5, GRT & GRT The operator's manual is a technical service
More informationKey No. Part No. Description
ENGINE 2 6 20 25-3 25-2 Á Á 22 24 25-1 16 8 5 10 18 23 12 25-2 20-5 25-4 14 3 Ref. Drive Page Ref. Auger Housing Page Key No. Part No. Description 2 - - - - - - ENGINE 3 002x97 BOLT, CARRIAGE 5/16-18 5
More informationALL PLANT & MIN TILL DRILL
4000 SERIES ALL PLANT & MIN TILL DRILL OWNER S MANUAL ADDENDUM OPERATION MAINTENANCE REPAIR PARTS #608869 (03-08) 2 Table of Contents Precision Planting Metering System 5-9 Precision Planting Introduction
More information