Model 872 COMBINE ADAPTER PARTS CATALOG

Transcription

1 Model 872 COMBINE ADAPTER PARTS CATALOG 1 CONTENTS Frame and Float Group Hydraulics Gear Drive... 10, 11 Feed Draper & Deck Retracting Tine Drum... 16, 17 John Deere Combines Adapter Completion Parts... 18, 19 Header Completion Parts... 20, 21 Case Combines Adapter Completion Parts... 22, 23 Header Completion Parts... 24, 25 Gleaner Combines Adapter Completion Parts... 26, 27 Header Completion Parts... 28, 29 New Holland Combines Adapter Completion Parts... 30, 31 Header Completion Parts... 32, 33 Cat Lexion Combines Adapter Completion Parts... 34, 35 Header Completion Parts... 36, 37 Auto Reel Speed Height Group... 38, 39 Auto Contour Package... 40, 41 Decals... 42, 43 Driveline... 44, 45 CE Driveline (European Applications): Case John Deere New Holland Float Optimizer (Attachment): Case & Cat Lexion Serial # & Prior Float Optimizer (Attachment): Cat Lexion Serial # & Up... 50, 51 Float Optimizer (Attachment): Case 2100/2300 Series & John Deere (50 Series) Serial # & Up... 52, 53 Float Optimizer (Attachment): John Deere Serial # & Prior... 54, 55 Float Optimizer (Attachment): John Deere (Pre 50 Series) Serial # & Up... 56, 57 Seed Saver (Attachment): European Headers... 58, 59 Plastic Skids (Attachment)... 60, 61 Visual Float Indicator (Attachment) Serial # & Prior Float Indicator (Attachment) Serial # & Up NUMERICAL LIST SUGGESTED STOCKING LIST L/H - left hand (Determined from Operator s position, facing forward.) R/H - right hand I.D. - inside diameter O.D. - outside diameter ABBREVIATIONS A/R - as required (quantity varies) REF - reference, part number called up elsewhere in catalog NC - national coarse thread NF - national fine thread NOTE: Common hardware is not illustrated. Alphabetic references are used to designate position and description of these items. When ordering, be sure the complete and proper serial number is given. SERIAL BREAKS The side of the serial number on which the dash (-) appears determines whether the part is used "up to" or "after" the serial number given. Example: Used on machines up to and including serial number Used on machines including and after serial number BOLDED PART S INDICATE REVISIONS OR ADDITIONS SINCE LAST PRODUCTION YEAR.

2 2 FRAME AND FLOAT GROUP

3 FRAME AND FLOAT GROUP 3 REF PART DESCRIPTION QTY SERIAL 1 REF FRAME Adapter, not serviced LEAF SPRING SET top spring with bushing and second spring BUSHING - rubber, 3/4 I.D LEAF SPRING - third LEAF SPRING fourth LEAF SPRING - fifth LEAF SPRING - sixth LEAF SPRING - seventh LEAF SPRING eighth RETAINER - leaf spring, rear PIVOT - leaf spring BOLT - hex head, 3/4 NC x 7 inch, thread full length WASHER - hardened MEMBER - float BAR - float link INSERT - spring, with yoke BOLT - round head, square neck, 3/4 NC x 142 mm ARM - float, with two bushings (item 19) BUSHING - plastic PIN - with two bushings (item 19) BOLT - hex head, 3/4 NC x 13, thread full length (was , 12 ) SPRING - float, outer SPRING - float, inner INSERT - spring, inner INSERT - spring, front PIN clevis, ¾ x 8 inch effective length 962 Header PIN clevis, ¾ x 6 ¼ inch effective length 972 Header RING - split ANGLE upper stop SHIM upper stop (qty. 4 for 12 RTD units 56 deck) PAD upper stop B 2701 HEADER ANGLE MECHANICAL ADJUSTMENT KIT... OPT* JOINT ASSEMBLY - center link PIN - clevis, 1 inch, center link PIN - lynch B 4234 HEADER ANGLE HYDRAULIC ADJUSTMENT KIT... OPT* CYLINDER - hydraulic SEAL KIT for cylinder FITTING - 90 elbow, 9/16 O-ring x 3/8 tube O-RING for 9/16 fitting HOSE - hydraulic VALVE ball, shut-off O-RING for 3/8 tube fitting FITTING - adapter, 3/8 tube x 9/16 O-ring O-RING - for 9/16 fitting HOLDER hose SHIM float range limiter, JD 50 Series & Contour Master, NH-TR... up to 3 per side B 2825 CASE HYDRAULIC CENTER LINK COMPLETION KIT... OPT* FITTING male adapter, 3/8 tube x 7/8 O-ring COUPLER male, 7/8 O-ring CAP dust COUPLER female, 7/8 O-ring O-RING for 7/8 fittings PLUG dust... 1 * NOTE: Kits available through WholeGoods only.

4 4 FRAME AND FLOAT GROUP

5 FRAME AND FLOAT GROUP 5 REF PART DESCRIPTION QTY SERIAL B 2826 JOHN DEERE HYDRAULIC CENTER LINK COMPLETION KIT... OPT* FITTING adapter, 3/8 tube x 9/16 O-ring COUPLER female, with shut-off... 2 B 2827 NEW HOLLAND HYDRAULIC CENTER LINK COMPLETION KIT... OPT* FITTING adapter, 3/8 tube x ½ NPT COUPLER male, ½ NPT HOSE hydraulic... 1 A BOLT - round head, short square neck, 3/4 NC x 4-1/2 inch B NUT - lock, 3/4 NC distorted thread, center punch F NUT - hex, 3/4 NC G BOLT - hex head, 3/4 NC x 4-1/2 inch K BOLT hex head, ¾ NC x 7 ½ inch L BOLT - round head, square neck, 3/8 NC x 4 ½ inch BOLT round head, square neck, 3/8 NC x 5 ½ inch (used with item 48) M NUT lock, smooth flange, 3/8 NC distorted thread P BOLT - round head, square neck, 3/8 NC x 3/4 inch 962 Header BOLT hex head, 3/8 x 5/8 inch, thread rolling 972 Header Q NUT lock, smooth flange, 3/8 NC distorted thread 962 Header * NOTE: Kits available through WholeGoods only.

6 6 HYDRAULICS

7 HYDRAULICS 7 REF PART DESCRIPTION QTY SERIAL PUMP - hydraulic SEAL KIT - for pump KEY - Woodruff, for pump RING retaining, internal 2 REF DRIVE - gear, see Pages 10 & REF SHAFT input, see Pages 10 & BUSHING - spline VALVE - check FITTING - 90 elbow, 7/16 O-ring x 3/8 tube O-RING - for 7/16 fitting HOSE - pump output to 5/8 steel line HOSE - pump case drain to valve block D port HOSE - R/H tank to pump input FITTING - adapter, 9/16 O-ring x 3/8 tube O-RING - for 9/16 fitting HOSE - check valve to valve block R port FITTING - 90 elbow, 1-1/16 O-ring x 5/8 tube O-RING - for 1-1/16 fitting FITTING - adapter, 5/8 tube swivel female x 1/2 NPT male FITTING - 45 elbow, 7/8 O-ring x 5/8 tube O-RING - for 7/8 fitting VALVE - check, 9/16 O-ring x 3/8 tube O-RING - for 9/16 fitting FITTING - adapter, 7/8 O-ring x 5/8 tube O-RING - for 7/8 fitting MOTOR - RTD drive SEAL KIT - for motor HOSE - valve block A port to drum motor rear port MOTOR - draper drive (replace key supplied with motor with item 21) SEAL KIT - for motor KEY - Woodruff, SAE 15, hardened (identified by score marks on top) HOSE - draper motor bottom port to valve block C1 port LINE - 5/8 hydraulic, valve block P port to right side hose (item 7) HOSE - valve block C2 port to male coupler COUPLER - male COUPLER - female O-RING - for coupler HOLDER - hose HOSE - L/H tank to valve block T1 port HOLDER - hydraulic lines FITTING - 90 elbow, 9/16 O-ring x 3/8 tube O-RING - for 9/16 fitting FITTING - 90 elbow, 1-1/16 O-ring x 3/4 tube O-RING - for 1-1/16 fitting FILTER ELEMENT- (LHA #SPE-15-10), see note 1 re: substitution FILTER ASSEMBLY - with head FITTING - adapter, 1-1/16 O-ring x 3/4 tube O-RING - for 1-1/16 fitting HOSE - tank to hydraulic line (item 36) CLAMP - hose LINE - hydraulic, filter to hose (item 34) CAP - with level indicator PLUG - magnetic, with O-ring, 3/4 NF O-RING - for 3/4 fitting NOTES: 1. MacDon filter element may be substituted in this application.

8 8 HYDRAULICS

9 HYDRAULICS 9 REF PART DESCRIPTION QTY SERIAL HOSE drum motor front port to draper motor top port 38 & 45 decks... 1 see note HOSE drum motor front port to draper motor top port 56 deck... 1 see note HOSE draper motor case drain FITTING swivel run tee, 3/8 tube VALVE sequence VALVE sequence, cartridge PS10-40H-0-N-4/ VALVE BLOCK includes items 46 to SEAL KIT - for valve block VALVE - check, CV1 & CV2, cartridge CV N VALVE check, CV4, cartridge CV N VALVE - relief, cartridge RV50-26A-0-P-50/ VALVE - needle, cartridge MR10-20B-0-N VALVE - needle, cartridge NV08-20E-0-N BALL/HANDLE KIT VALVE - check, pilot operated, CV3, cartridge CV N VALVE - pressure compensator, cartridge EC P PISTON pilot PLUG - hex socket head, 7/16 O-ring (50223) PLUG - hex head, 9/16 O-ring (50219)... 1 A WASHER - lock, M12 B NUT - hex jam, M12 C BOLT - hex socket head, M8 x 30 mm D WASHER - lock, M8 E BOLT - flange head, 3/8 NC x 3/4 inch F BOLT - rnd hd, sq. nk, 3/8 NC x 1-3/4 G NUT - lock, smth flng, 3/8 NC dist. thd H WASHER - flat, 11/32 inch I.D. J WASHER lock, 5/16 I.D. K 5252 BOLT hex head, 5/16 NC x 2 ¼ NOTES: 2. There are three deck sizes: 38, 45 and 56 (approximate feed draper width). Combines using each size are as follows: 38 Case 60 & 66 Series / Gleaner / New Holland TR 45 Case 80 & 88 Series / Cat Lexion 450, 470 & John Deere** / New Holland TX / Cat Lexion 460, 465, 480 & 485 ** Some John Deere CTS Combines with dust shields in rice applications may have been converted to 45 decks. Check feed draper width carefully before ordering parts that are specific to one deck size.

10 10 GEAR DRIVE

11 GEAR DRIVE 11 REF PART DESCRIPTION QTY SERIAL DRIVE - gear, Case DRIVE - gear, Gleaner DRIVE - gear, New Holland DRIVE - gear, Cat Lexion DRIVE - gear, John Deere Level Land - prior to 50 Series DRIVE gear, John Deere Level land 50 Series and up DRIVE gear, John Deere Contour Master SHAFT - input, hex bore, with end cup: Case SHAFT - input, 21 tooth bore, with end cup: Gleaner SHAFT - input, 6 tooth spline bore, with end cup: New Holland SHAFT - input, 21 tooth long spline bore, with end cup: Cat Lexion SHAFT - input, hex bore, with end cup: JD Level Land prior to 50 Series SHAFT - input, 21 tooth long spline bore, with end cup: JD Level Land - 50 Series & up SHAFT - input, 21 tooth long spline bore, with end cup: JD Contour Master HOUSING HOUSING SHAFT - output, with end cup: Case, John Deere & Gleaner SHAFT - output, with end cup: New Holland SHAFT - output, with end cup: Cat Lexion GEAR - Case, John Deere & Gleaner GEAR - New Holland GEAR Cat Lexion SEAL - oil, output shaft SEAL - oil, input shaft KEY - input shaft BEARING - output shaft BEARING - input shaft NUT - hex, M PIN - dowel BREATHER - oil plug (see note 1) PLUG - oil (see note 1) CUP RCA CUP - RCA PLUG - oil, magnetic (see note 1) SCREW - hex socket head, M8 x 25 mm SCREW - hex socket head, M8 x 65 mm O-RING for plugs, items 13, 14 and NOTES: 1. For gear drives (New Holland) and (John Deere as specified above): Position of breather plug, standard plugs and magnetic plug are 90 counter-clockwise to positions shown. For gear drive (Cat Lexion): Position of breather plug and magnetic plug are reversed.

12 12 FEED DRAPER & DECK

13 FEED DRAPER & DECK 13 REF PART DESCRIPTION QTY SERIAL NOTE: There are three deck sizes; 38, 45 and 56 (approximate feed draper width). Combines using each size are as follows: 38 Case 60 & 66 Series / Gleaner / New Holland TR 45 Case 80 & 88 Series / Cat Lexion 450, 470 & John Deere* / New Holland TX / Cat Lexion 460, 465, 480 & 485 * Some John Deere CTS Combines with dust shields in rice applications may have been converted to 45 decks. Check feed draper width carefully before ordering parts that are specific to one deck size PAN - feed draper, 38 deck PAN feed draper, 45 deck PAN - feed draper, 56 deck ROD - idler adjuster SUPPORT - idler rod SPRING - idler tension TUBE - idler roller, 38 deck TUBE - idler roller, 45 deck TUBE - idler roller, 56 deck SHAFT - idler roller, 38 deck SHAFT - idler roller, 45 deck SHAFT - idler roller, 56 deck BEARING - ball SEAL - bearing SPACER - tube ARM - idler FITTING - lubrication, ROLLER drive, 38 deck (was ) ROLLER drive, 45 deck (was ) ROLLER drive, 56 deck (was ) SUPPORT - drive roller, right BEARING - ball, with lock collar FLANGE - bearing, cropped FLANGE - bearing, cropped (lube fitting removed) COVER - bearing, cropped FITTING - lubrication SUPPORT - drive roller, left WASHER - flat SPACER - tube SUPPORT - rear right (shown), 38 deck SUPPORT - rear left (not shown), 38 deck SUPPORT - rear right (not shown), 45 deck SUPPORT - rear left (not shown), 45 deck BAR support, outboard 38 & 45 decks SUPPORT rear, 38 & 45 decks SUPPORT - front right (shown) SUPPORT - front left (not shown) SEAL - draper FLAP rubber, 38 & 45 decks BAR - support, 38 & 45 decks SUPPORT - rear left (shown), 56 deck SUPPORT - rear right (not shown), 56 deck SUPPORT rear, 56 deck PLATE - motor protector DRAPER feed, 38 deck, includes item DRAPER feed, 45 deck, includes item DRAPER feed, 56 deck, includes item

14 14 FEED DRAPER & DECK

15 FEED DRAPER & DECK 15 REF PART DESCRIPTION QTY SERIAL CONNECTOR KIT - incl. 2 slats and hardware, 38 deck CONNECTOR KIT - incl. 2 slats and hardware, 45 deck CONNECTOR KIT - incl. 2 slats and hardware, 56 deck REF MOTOR - draper drive, see Hydraulics MOUNT Header, 38 deck MOUNT Header, 45 deck MOUNT Header, 56 deck SUPPORT - right, 972 Header (shown) SUPPORT - left, 972 Header (not shown) RETAINER Header MOUNT Header, 38 deck (was ) MOUNT Header, 45 deck (was ) MOUNT Header, 56 deck (was ) SUPPORT - right, 962 Header (was ) SUPPORT - left, 962 Header (was ) RETAINER Header BAR - draper seal support SUPPORT draper, 38 deck SUPPORT draper, 45 deck SUPPORT draper, 56 deck WASHER flat (use as spacer for drive rollers without stepped hub) B 4267 QUICK ATTACH TRANSITION PLATE KIT 972 header, 38 deck B 4268 QUICK ATTACH TRANSITION PLATE KIT 972 header, 45 deck B 4269 QUICK ATTACH TRANSITION PLATE KIT 972 header, 54 deck Item 45 Kits available through WholeGoods only PAN quick attach, 972 header, 38 deck PAN quick attach, 972 header, 45 deck PAN quick attach, 972 header, 56 deck SHIM spacer plate, quick attach pan, 38 deck SHIM spacer plate, quick attach pan, 45 deck SHIM spacer plate, quick attach pan, 56 deck RETAINER pan, welded to header cutterbar (allows use of new pan) A NUT - hex, 5/8 NC B WASHER - lock, 5/8 I.D. C BOLT - round head, square neck, 3/8 NC x 1 inch D NUT - lock, smooth flange, 3/8 NC distorted thread E SETSCREW - 3/8 NC x 5/16 inch F SCREW - machine, countersunk Torx head, 3/8 NC x 3/4 inch G BOLT - round head, square neck, 3/8 NC x 1-1/4 inch J BOLT - round head, short square neck, 1/2 NC x 1-1/4 inch K WASHER lock, ½ inch L BOLT - hex head, 1/2 NC x 2-1/4 inch, thread full length M NUT - hex, 1/2 NC N NUT - lock, smooth flange, 1/2 NC distorted thread P BOLT - round head, square neck, 1/2 NC x 1 inch R BOLT - round head, square neck, 1/2 NC x 1-1/2 inch S BOLT round head, short square neck, ½ NC x 1 inch V BOLT flange head, ½ NC x 1 inch W WASHER flat, 17/32 inch I.D. X BOLT round head, square neck, ½ NC x 1 ¼ inch

16 16 RETRACTING TINE DRUM

17 RETRACTING TINE DRUM 17 REF PART DESCRIPTION QTY SERIAL 11 / 12 NOTE: There are two drum types; 11 diameter drum with flighting and 12 diameter drum (no flighting). Combines using each size are as follows: 11 diameter drum with flighting Case / Gleaner / New Holland TR / Cat Lexion 450, 470 & diameter drum (no flighting) John Deere / New Holland TX / Cat Lexion 460, 465, 480 & DRUM 11 retracting tine... 1 / BEARING ball FLANGE motor mount, with bearing (item 2) SHAFT left SHAFT right WASHER flat BLOCK tine shaft, 11 drum... 2 / BLOCK tine shaft, 12 drum... 0 / SPACER tine shaft, 11 drum... 2 / SHAFT tine BEARING plastic, tine mount / BEARING ball, with lock collar FLANGE bearing FLANGE bearing, with lube fitting TINE finger, 11 drum / 0 see note TINE finger, 12 drum... 0 / 31 see note PIN roll, 1/8 x 1 inch / PIN hair / GUIDE plastic / T-NUT ¼ NC / SCREW hex socket, button head, ¼ NC x ¾ inch / COVER drum SUPPORT right, 11 drum... 1 / PLATE cam SHIM cam plate, (nominal qty. 1)... A/R SUPPORT left, 11 drum... 1 / FLAP closure, 11 drum... 2 / STRAP flap mounting, 11 drum... 2 / 0 27 REF MOTOR drum drive, see Hydraulics DRUM 12 retracting tine... 0 / SUPPORT right, 12 drum... 0 / SUPPORT outer, right, 12 drum... 0 / SUPPORT outer, left, 12 drum... 0 / SUPPORT left, 12 drum... 0 / FLAP closure, right, 12 drum... 0 / FLAP closure, left, 12 drum... 0 / SUPPORT right, 12 drum... 0 / SUPPORT left, 12 drum... 0 / FLAP closure, 12 drum... 0 / COVER guide, used at outboard locations where tine is removed... AR KIT repair, RTD patch... AR A BOLT hex head, 3/8 NC x 2 ½ B NUT lock, smth flng, 3/8 NC dist thd C BOLT hex head, ½ NC x 2 ½ inch D NUT lock, smth flng, ½ NC dist thd E BOLT rnd head, sq nk, ½ NC x 1 ½ F BOLT rnd head, sq nk, 3/8 NC x 1 G BOLT flange head, ½ NC x 1 ¼ inch H BOLT rnd head, sq nk, ½ NC x 1 ¼ J BOLT rnd hd, sq nk, ½ NC x 1 inch K BOLT hx hd, shlder, 3/8 NC x 29/32 L BOLT rnd head, sq nk, 3/8 NC x ¾ NOTES: 1. Tine quantities shown are for full drum width. For some combines, tines are removed from each end of the drum to ensure clearance to header side drapers.

18 18 JOHN DEERE COMBINES ADAPTER COMPLETION PARTS

19 JOHN DEERE COMBINES ADAPTER COMPLETION PARTS 19 REF PART DESCRIPTION QTY SERIAL 1 REF DRIVE - gear, see page Items 2 to 6 are common to both Level Land and Contour Master Feeder Houses HANDLE - gear drive PIN - lynch BAR lower lock CHANNEL - lower lock, R/H CHANNEL - lower lock, L/H... 1 Items 9 to 19 are used with Level Land Feeder House prior to 50 Series only SHIELD - drive ARM - drive ARM - torque, with welded pin SHAFT - spline SHIELD - rubber LATCH - rubber SHIELD - left CLAMP hex bore, 7720, 9500 and CTS Combines SHIELD left, 7720, 9500 and CTS Combines... 1 Items 22 to 24 are used with Level Land Feeder Houses 50 Series & Newer and Contour Master Feeder Houses ARM - drive ARM torque, with welded pin ARM drive, 9650 Combine only... 1 A BOLT - hex head, M12 x 25 mm B WASHER - lock, M12 E BOLT - hex head, 1/2 NC x 3 inch 7720, 9500 & CTS BOLT flange head, ½ NC x 1 ¼ inch F NUT - lock, smooth flange, 1/2 NC distorted thread G NUT - lock, smooth flange, 3/8 NC distorted thread H BOLT - round head, square neck, 3/8 NC x 3/4 inch J BOLT hex head, ½ NC x 4 ½ inch K NUT - lock, 3/4 NC distorted thread L BOLT - hex head, 3/8 NC x 1-1/2 inch M BOLT round head, square neck, 3/8 NC x 1 inch N BOLT - hex head, M12 x 25 mm without item BOLT - hex head, M12 x 30 mm with item 24 P BOLT - round head, square neck, 5/8 NC x 1-1/2 inch R NUT - lock, smooth flange, 5/8 NC distorted thread S BOLT - flange head, 5/16 NC x 3/4 inch T NUT - serrated flange lock, 5/16 NC

20 20 JOHN DEERE COMBINES HEADER COMPLETION PARTS

21 JOHN DEERE COMBINES HEADER COMPLETION PARTS 21 REF PART DESCRIPTION QTY SERIAL HOLDER - reel lift coupler FITTING - reducer bushing, 1/4 NPT female x 1/2 NPT male HOSE - extension, reel lift, 962 Header only... 1 REF HOSE - reel lift, see 972 Header Parts Catalog WASHER - dished COUPLER - reel lift PLUG - dust HARNESS - header lights, adapter, prior to 50 Series combines HARNESS header lights, adapter, 50 Series Combines & newer B 2544 * MOUNTING KIT JD Reel Speed Sensor for 962 Headers...OPT SPROCKET timing, 50 tooth SUPPORT sensor WASHER flat (third washer comes with header) HARNESS wiring, extension (for 21 & & all 962 headers) B 4001 * MOUNTING KIT JD Reel Speed Sensor for 972 Headers...OPT SPROCKET timing, 31 tooth SUPPORT sensor HOLDER - harness DISC 21 tooth... 1 A BOLT - round head, square neck, 3/8 NC x 3/4 inch B NUT - lock, smooth flange, 3/8 NC distorted thread C BOLT hex head, 3/8 x 5/8 inch, thread rolling D BOLT flange head, 3/8 NC x ¾ inch E NUT lock, 5/8 NC distorted thread * NOTE: Kits available through WholeGoods only. Sensor must be obtained from John Deere.

22 22 CASE COMBINES ADAPTER COMPLETION PARTS

23 CASE COMBINES ADAPTER COMPLETION PARTS 23 REF PART DESCRIPTION QTY SERIAL MEMBER - adapter frame, right MEMBER - adapter frame, left FILLER - lower, left 60 & 66 Series Combines FILLER - lower, left 80 & 88 Series Combines FILLER - lower, right 60 & 66 Series Combines FILLER lower, right 80 & 88 Series Combines PIN - clamp PIN - straight REF DRIVE - gear, see page ARM drive PIN - lynch HANDLE - gear drive SHIELD R/H, rear section SHIELD - R/H, front section SUPPORT - R/H shield, top SUPPORT - R/H shield, bottom SHIELD L/H SUPPORT drive arm SHIELD R/H extension for narrow feeder house Models: 1640,1644, 1660, 1666, 2166, A BOLT - round head, square neck, 1/2 NC x 1 inch B NUT - lock, smooth flange, 1/2 NC distorted thread C BOLT - flange head, 1/2 NC x 1 inch D BOLT - round head, square neck, 1/2 NC x 1-1/4 inch E BOLT - hex head, 5/8 NC x 4-1/2 inch, thread full length F NUT - hex jam, 5/8 NC G BOLT - hex head, M12 x 25 mm H WASHER - lock, M12 P NUT - lock, smooth flange, 3/8 NC distorted thread Q BOLT - flange head, 3/8 NC x 3/4 inch R WASHER - flat, 13/32 inch I.D. S BOLT flange head, 3/8 NC x 5/8 inch T BOLT flange head, 3/8 NC x 1 ¼ inch

24 24 CASE COMBINES HEADER COMPLETION PARTS

25 CASE COMBINES HEADER COMPLETION PARTS 25 REF PART DESCRIPTION QTY SERIAL O-RING... 2 see note (1) COUPLER - male, 1/2 NPT HOLDER - hose HOLDER - hose FITTING - reducer bushing, 1/4 NPT female x 1/2 NPT male HOSE - extension, reel lift, 962 Header only... 1 REF HOSE - reel lift, see 972 Header Parts Catalog CAP - dust HARNESS - header lights, adapter piece HOSE reel drive pressure HOSE reel drive return HOLDER reel drive couplers CLAMP coupler COUPLER female COUPLER male CABLE TIE white... 2 A NUT - lock, smooth flange, 3/8 NC distorted thread B BOLT - round head, square neck, 3/8 NC x 3/4 inch D BOLT - round head, square neck, 3/8 NC x 1-1/4 inch E SCREW - hex washer head, 3/8 NC x 5/8 inch thread forming NOTES: Header: Serial No Header: All Serial Nos.

26 26 GLEANER COMBINES ADAPTER COMPLETION PARTS

27 GLEANER COMBINES ADAPTER COMPLETION PARTS 27 REF PART DESCRIPTION QTY SERIAL SUPPORT - beam MEMBER - adapter frame, left SUPPORT - lower, left REF DRIVE - gear, see page ARM - drive PIN - lynch SHIELD - drive, right SHIELD - drive, left FLAP - rubber LATCH - rubber MEMBER - adapter frame, right SUPPORT - lower, right BAR - arm support HANDLE - gear drive... 1 A BOLT - round head, square neck, 3/8 NC x 3/4 inch B NUT - lock, smooth flange, 3/8 NC distorted thread C BOLT - round head, square neck, 1/2 NC x 1 inch D NUT - lock, smooth flange, 1/2 NC distorted thread E BOLT - flange head, 1/2 NC x 1 inch F BOLT - round head, square neck, 5/8 NC x 1-1/2 inch G WASHER - flat, 21/32 inch I.D. H NUT - lock, 5/8 NC distorted thread J BOLT - hex head, M12 x 25 mm K WASHER - lock, M12 L BOLT - hex head, 5/8 NC x 1-1/2 inch R BOLT - hex head, 3/8 NC x 1-1/2 inch S WASHER - flat, 13/32 inch I.D. T BOLT - round head, short square neck, 1/2 NC x 1-1/4 inch

28 28 GLEANER COMBINES HEADER COMPLETION PARTS

29 GLEANER COMBINES HEADER COMPLETION PARTS 29 REF PART DESCRIPTION QTY SERIAL HOLDER - reel lift coupler WASHER - dished COUPLER - male, 1/2 NPT FITTING - tee, 1/2 NPT male x 1/2 NPT male x 5/8 tube FITTING - 90 elbow, 5/8 tube male x 5/8 tube female HOSE - reel drive, from right side of opening O-RING FITTING - tee, 1/2 NPT female x 5/8 tube male x 5/8 tube male VALVE - check HOSE - reel drive return COUPLER - female, 1/2 NPT HOLDER - hose COUPLER - male, 1/4 NPT - reel lift CAP - dust HOSE - extension, reel lift, 962 Header only... 1 REF HOSE - reel lift, see 972 Header Parts Catalog HOLDER - hose HARNESS - header lights, adapter piece WASHER - dished DISC 21 tooth... 1 A BOLT - round head, square neck, 3/8 NC x 3/4 inch B NUT - lock, smooth flange, 3/8 NC distorted thread C WASHER flat, 15/16 inch ID D NUT lock, 5/8 NC distorted thread E SCREW - hex washer head, 3/8 NC x 5/8 inch thread forming NOTES: 1. RL = Reel Lift, RP = Reel Pressure, RR = Reel Return

30 30 NEW HOLLAND COMBINES ADAPTER COMPLETION PARTS

31 NEW HOLLAND COMBINES ADAPTER COMPLETION PARTS 31 REF PART DESCRIPTION QTY SERIAL MEMBER - adapter frame, left MEMBER - adapter frame, right BEAM - lower WASHER - rectangular PIN - straight EYEBOLT, feeder house latch ARM - drive REF DRIVE - gear, see page HANDLE - gear drive SUPPORT - with pins for TR & TX PIN - lynch... 1 A BOLT - flange head, 1/2 NC x 1 inch B NUT - smooth flange, 1/2 NC distorted thread C BOLT - round head, square neck, 5/8 NC x 1-1/2 inch D NUT - lock, 5/8 NC distorted thread E WASHER - flat 21/32 inch I.D. F BOLT - hex head, M12 x 25 mm G WASHER - lock, M12 M SETSCREW - 3/8 NC x 1-1/2 inch N NUT - hex jam, 3/8 NC P BOLT - flange head, 3/8 NC x 1 inch

32 32 NEW HOLLAND COMBINES HEADER COMPLETION PARTS

33 NEW HOLLAND COMBINES HEADER COMPLETION PARTS 33 REF PART DESCRIPTION QTY SERIAL HOLDER - reel drive coupler COUPLER - female, 1/2 NPT O-RING - for coupler WASHER - dished HOSE - reel drive return O-RING HOSE - reel drive pressure COUPLER - male, 1/2 NPT HOLDER - hose HOLDER - hose HARNESS - header lights, adapter piece COUPLER - male, 1/4 NPT - reel lift CAP - dust HOSE - extension, reel lift, 962 Header only... 1 REF HOSE - reel lift, see 972 Header Parts Catalog... 1 A NUT - lock, smooth flange, 3/8 NC distorted thread B BOLT - round head, square neck, 3/8 NC x 3/4 inch D BOLT - round head, square neck, 3/8 NC x 1-1/4 inch E SCREW - hex washer head, 3/8 NC x 5/8 inch thread forming

34 34 CAT LEXION COMBINE ADAPTER COMPLETION PARTS

35 CAT LEXION COMBINE ADAPTER COMPLETION PARTS 35 REF PART DESCRIPTION QTY. SERIAL ARM latch, left ARM latch, right LATCH upper TUBE latch PIN roll, 5/16 x 1 ¼ inch ARM linkage LEVER left, with handle LEVER right PIN lower latch PIN L SPRING compression REF DRIVE gear, see Hydraulics, page ARM drive PIN lynch HANDLE gear drive ARM support, models 460/465, and 480/ ARM support, models 450/ SUPPORT extended, includes item (see note 1) PLUG extension... 2 (see note 1) A BOLT hex head, ½ NC x 1 inch B NUT lock, smooth flange, ½ NC distorted thread C BOLT flange head, ½ NC x 1 ¼ inch D BOLT hex head, ½ NC x 3 inch E NUT hex, ¾ inch F NUT lock, ¾ NC distorted thread, center punch G PIN cotter, 1/8 x 1 inch H BOLT hex head, M12 x 25 mm J WASHER lock, M12 K BOLT flange head, 3/8 NC x 1 inch L NUT lock, smooth flange, 3/8 NC distorted thread M WASHER flat, 21/32 inch ID N NUT hex jam, 1/2 NC NOTES: 1. RE: Items 18 & 19, extended supports are required for Non-CAC Combines with Serial Numbers as follows: PRIOR TO - 8YW Model 450 9FW Model 460 3HZ Model 465 9TW Model 470 2BZ Model 480 8ZW Model 485

36 36 CAT LEXION COMBINE HEADER COMPLETION PARTS

37 CAT LEXION COMBINE HEADER COMPLETION PARTS 37 REF PART DESCRIPTION QTY. SERIAL SUPPORT driveline storage HOLDER electrical/hydraulics group VALVE two function COUPLING electrical/hydraulic HARNESS electrical, coupling to valve COVER rubber cap FITTING adapter, M12 O-ring x ¼ NPT FITTING adapter, M14 x 3/8 tube FITTING restrictor, inch orifice HOSE hydraulic, coupling to valve O-RING hose fittings HARNESS adapter, header lights CONDUIT protective HOSE reel lift extension, 962 Header... 1 REF HOSE reel lift, 972 Header: see 972 Header Parts Catalog DISC 21 tooth REEL DRIVE KIT for Combines with left side reel drive... 1 See Note HOLDER reel drive couplers HOSE reel drive to left side O-RING HOLDER hose COUPLER female (Cat Lexion # ) COUPLER male (Cat Lexion # ) TIE plastic, yellow... 1 A BOLT round head, short square neck, 3/8 NC x ¾ inch B NUT lock, smooth flange, 3/8 NC distorted thread C BOLT hex head, ½ NC x 4 inch, thread full length D NUT hex, ½ NC E BOLT hex head, 5/16 NC x 3 ¾ inch F NUT lock, smooth flange, 5/16 NC distorted thread G BOLT hex head, 5/16 NC x 1 inch H BOLT socket head, M5 x 45 mm J NUT lock, 5/8 NC distorted thread K SCREW hex washer head, 3/8 x 5/8 inch thread forming L BOLT round head, square neck, 3/8 NC x 1 inch M BOLT round head, square neck, 3/8 NC x ¾ inch NOTES: 1. Combines beginning with the following Serial Numbers have left side reel drive: MODEL # S/N 450 8YW FW HZ TW MZ BZ ZW 00530

38 38 CAT LEXION COMBINE AUTO REEL SPEED/HEIGHT GROUP

39 CAT LEXION COMBINE AUTO REEL SPEED/HEIGHT GROUP 39 REF PART DESCRIPTION QTY. SERIAL DISC 13 teeth, reel speed sensor: 962 Header WASHER flat: 962 Header SUPPORT reel speed sensor: 962 Header SENSOR reel speed NUT reel sensor ARM reel height sensor, 3-arm headers ROD link, reel height sensor, 3-arm headers POTENTIOMETER ASSEMBLY HARNESS reel speed/height HARNESS extension, 2-arm headers SUPPORT reel height sensor, 2-arm headers DISC 8 teeth, reel speed sensor: 972 Header SUPPORT reel speed sensor: 972 Header... 1 A BOLT hex head, ¼ NC x 1 ¼ inch B WASHER lock, ¼ inch C BOLT round head, square neck, 5/16 NC x 1 inch D NUT serrated flange lock, 5/16 NC E NUT hex, 3/8 NC F BOLT hex head, 5/16 NC x 1 ¾ inch G BOLT hex head, ¼ NC x 1 inch H NUT lock, ¼ NC distorted thread J WASHER flat, 9/32 inch ID K BOLT hex head, ¼ NC x ¾ inch

40 40 CAT LEXION COMBINE AUTO CONTOUR PACKAGE

41 CAT LEXION COMBINE AUTO CONTOUR PACKAGE 41 REF PART DESCRIPTION QTY. SERIAL GUSSET mounting ARM L/H ARM R/H ANCHOR arm ARM link ARM adjusting POTENTIOMETER ASSEMBLY BAND ground sensor SUPPORT band, 962 header SUPPORT clamp SUPPORT band, 972 header HARNESS wiring... 1 A BOLT round head, square neck, 3/8 NC x 1 inch B NUT lock, smooth flange, 3/8 NC distorted thread C BOLT hex head, 5/8 NC x 3 ½ inch D NUT lock, smooth flange, 5/8 NC distorted thread E WASHER flat, SAE 21/32 ID F BOLT round head, square neck, 3/8 NC x 1 ½ inch G WASHER flat, SAE 13/32 ID H WASHER lock, 3/8 inch J BOLT hex head, 3/8 NC x 1 inch K BOLT round head, square neck, 5/16 NC x 1 ½ (972 only) L BOLT - round head, square neck, 5/16 NC x 3/4 M NUT lock, smooth flange, 5/16 NC distorted thread N NUT hex, 3/8 NC (972 only) P BOLT hex head, ¾ NC x 8, threaded full length Q NUT hex, ¾ NC

42 42 DECALS

43 DECALS 43 REF PART DESCRIPTION QTY SERIAL DECAL Header Hazard DECAL - DANGER: Rotating Driveline DECAL - DANGER: Shield Missing DECAL Refer to Operator s Manual: CE Drivelines DECAL - Hydraulic Oil DECAL Float Lock Out DECAL Auger/Drum Position for Case Combines

44 44 DRIVELINE

45 DRIVELINE 45 REF PART DESCRIPTION QTY SERIAL NOTE: For CE Driveline for European Applications, see pages 46 & YOKE - clamp, to header drive shaft CROSS & BEARING KIT, with lube fitting in end cap NSS YOKE & SHAFT (order item 10) SHIELD - outer, with decal BEARING KIT - shield SHIELD inner: John Deere, Case, Gleaner & CAT SHIELD - inner: New Holland NSS YOKE & TUBE - (order item 11) YOKE - spline bore, 1 3/8 x 21 teeth, with slide collar: JD, Gleaner & CAT YOKE - hex bore, with slide collar: Case YOKE - spline bore, 1 3/8 x 6 teeth, with slide collar: New Holland JOINT ASS Y. - male half, includes items 1,2,3,4, JOINT ASS'Y. - female half, incl. items 5,6,8,9,12: JD, Gleaner & CAT JOINT ASS'Y. - female half, incl. items 5,6,8,9,12: Case JOINT ASS'Y. - female half, incl. items 5,6,8,9,12: New Holland CROSS & BEARING KIT, with lube fitting in body of cross DRIVELINE - complete, includes items 10 and 11: JD, Gleaner & CAT DRIVELINE - complete, includes items 10 and 11: Case DRIVELINE - complete, includes items 10 and 11: New Holland... 1 A BOLT - hex head, 1/2 NC x 2 3/4 inch B NUT - lock, smooth flange, 1/2 NC distorted thread

46 46 CE DRIVELINE (European Applications) CASE COMBINE REF PART DESCRIPTION QTY SERIAL DRIVELINE - complete, includes items A and B: Case... 1 A JOINT ASS Y. - male half, includes items 1,2,3,4, B JOINT ASS Y. - female half, incl. items 2,5,10,11,12,13: Case YOKE - clamp, to header drive shaft CROSS & BEARING KIT, with lube fitting in end cap NSS YOKE & SHAFT (order item A) SHIELD - outer, with decals BEARING KIT - shield SHIELD inner: Case CENTRALIZER tube NSS YOKE & TUBE - (order item B) YOKE Auto-Lok, hex bore: Case REPAIR KIT Auto-Lok yoke... 1

47 CE DRIVELINE (European Applications) JOHN DEERE COMBINE 47 REF PART DESCRIPTION QTY SERIAL DRIVELINE - complete, includes items A and B: John Deere... 1 A JOINT ASS Y. - male half, includes items 1,2,3,4, B JOINT ASS Y. - female half, incl. items 2,5,10,11,12,13: John Deere YOKE - clamp, to header drive shaft CROSS & BEARING KIT, with lube fitting in end cap NSS YOKE & SHAFT (order item A) SHIELD - outer, with decals BEARING KIT - shield SHIELD inner: John Deere CENTRALIZER tube NSS YOKE & TUBE - (order item B) YOKE Auto-Lok, spline bore: John Deere REPAIR KIT Auto-Lok yoke... 1

48 48 CE DRIVELINE (European Applications) NEW HOLLAND COMBINE REF PART DESCRIPTION QTY. SERIAL DRIVELINE complete, includes items A and B: New Holland 1 A JOINT ASS Y. male half, includes items 1,2,3,4, B JOINT ASS Y. female half, includes items 2,5,10,11,12, YOKE clamp, to header drive shaft CROSS & BEARING KIT, with lube fitting in end cap NSS YOKE & SHAFT (order item A) SHIELD outer, with decals BEARING KIT shield SHIELD inner CENTRALIZER tube NSS YOKE & TUBE (order item B) YOKE Auto-Lok, spline bore REPAIR KIT Auto-Lok yoke... 1

49 FLOAT OPTIMIZER (Attachment) SERIAL # & PRIOR CASE & CAT LEXION COMBINES 49 REF PART DESCRIPTION QTY SERIAL B 2898 FLOAT OPTIMIZER CASE IH, complete... 1 B 4246 FLOAT OPTIMIZER CAT Lexion, complete... 1 Kits available through WholeGoods Only SUPPORT controller ARM float optimizer SPACER tube PIN clevis, 1 x 4.53 inch effective length LINK control, plastic (was , steel) BOLT shoulder, 3/8 NC ARM control SCREW set, Allen head, cup point, ¼ NC x ½ inch HARNESS wiring... 1 Assemble in bottom hole for Adapters with traction surface walkway Assemble in top hole for Adapters without traction surface walkway PIN lynch HOLDER harness HARNESS wiring, Cat Lexion only... 1 A BOLT flange head, 3/8 NC x ¾ inch Adapters with traction surface walkway SCREW self-tapping, 3/8 x 5/8 inch Adapters without traction surface walkway B NUT lock, smooth flange, 3/8 NC distorted H NUT jam, 3/8 extra fine J WASHER lock, internal tooth, 3/8 I.D.

50 50 FLOAT OPTIMIZER (Attachment) SERIAL # & UP CAT LEXION COMBINES

51 FLOAT OPTIMIZER (Attachment) SERIAL # & UP CAT LEXION COMBINES 51 REF PART B4416 DESCRIPTION QTY. SERIAL FLOAT OPTIMIZER KIT Cat Lexion SUPPORT lower mounting bracket ARM upper SPRING torsion INDICATOR gauge, header float INDICATOR rod, header float REF SENSOR - potentiometer ARM pivot ARM linkage (12V) ROD linkage CLIP rod end ARM sensing HARNESS feeder house HARNESS float optimizer, Cat Lexion (12V) SUPPORT float optimizer, Cat Lexion (5V) SPLICE TAP - connector PLATE adapter, (5V) SUPPORT (5V) REF SENSOR (5V), Cat Lexion # REF SENSOR (12V), Cat Lexion # B BOLT hex head, 3/8 NC x 2 ½ inch C NUT lock, smooth flange, 3/8 NC distorted thread D SCREW self-tapping, 3/8 x 5/8 inch E WASHER flat, 13/32 inch ID F BOLT round head, square neck, 3/8 NC x 2 ¼ inch, thd. full G WASHER flat, 17/32 inch ID H NUT serrated flange lock, 3/8 NC N SCREW phillips, pan, M6 x 1.0 x 8 mm P BOLT round head, square neck, #10-24 NC x 3/4 inch Q NUT lock, hex head, UNC R SCREW phillips, pan head, M8 x 3/4 inch S NUT hex, M8-32 UNC

52 52 FLOAT OPTIMIZER (Attachment) SERIAL # & UP Case Combines 2100/2300 Series & John Deere Combines (50 Series)

53 FLOAT OPTIMIZER (Attachment) SERIAL # & UP Case Combines 2100/2300 Series & John Deere Combines (50 Series) 53 REF PART DESCRIPTION QTY. SERIAL B4415 FLOAT OPTIMIZER KIT Case 2100/2300 B4499 FLOAT OPTIMIZER KIT John Deere (50 Series) SUPPORT lower mounting bracket PLATE sensor mounting ARM upper SPRING torsion INDICATOR gauge, header float INDICATOR rod, header float SENSOR - potentiometer ARM pivot SUPPORT pivot arm ROD linkage CLIP rod end ARM sensing HOLDER - harness HARNESS float optimizer, Case 2100/2300 Series HARNESS float optimizer, John Deere (50 Series)... 1 A SCREW hex washer head, #10 x 1 ¼ inch, self-tapping B BOLT hex head, 3/8 NC x 2 ½ inch C NUT lock, smooth flange, 3/8 NC distorted thread D SCREW self-tapping, 3/8 x 5/8 inch E WASHER flat, 13/32 inch ID F BOLT round head, square neck, 3/8 NC x 2 ¼ inch, thd. full G WASHER flat, 17/32 inch ID H NUT serrated flange lock, 3/8 NC J BOLT hex head, 3/8 NC x ¾ inch (Case Only) K BOLT large flange head, 3/8 NC x 1 inch BOLT round head, short square neck, 3/8 NC x 3/4 inch

54 54 FLOAT OPTIMIZER (Attachment) SERIAL # & PRIOR JOHN DEERE COMBINES

55 FLOAT OPTIMIZER (Attachment) SERIAL # & PRIOR JOHN DEERE COMBINES 55 REF PART DESCRIPTION QTY SERIAL B 2899 FLOAT OPTIMIZER JOHN DEERE PRIOR TO 50 SERIES, complete... 1 B 4252 FLOAT OPTIMIZER JOHN DEERE 50 SERIES, complete... 1 Kits available through WholeGoods Only ARM float optimizer SPACER tube PIN clevis, 1 x 4.53 inch effective length BOLT shoulder, 3/8 NC PIN lynch LINK control, plastic (was , steel) ARM control, John Deere Prior to 50 Series SUPPORT controller, John Deere Prior to 50 Series REF CIRCUIT BOX order John Deere AH Prior to 50 Series PIN roll, ¼ x 1 inch, John Deere Prior to 50 Series HARNESS wiring, John Deere Prior to 50 Series HOLDER harness SUPPORT sensor, John Deere 50 Series BAR sensor, John Deere 50 Series BAR John Deere 50 Series ARM John Deere 50 Series REF SENSOR order John Deere RE Series HARNESS wiring, John Deere 50 Series... 1 B NUT lock, smooth flange, 3/8 NC distorted C BOLT round head, square neck, ¼ NC x 2 ¼ inch D WASHER lock, ¼ inch E NUT hex, ¼ NC F SCREW self-tapping, 3/8 x 5/8 inch G BOLT round head, short square neck, 3/8 NC x ¾ inch BOLT large flange head, 3/8 NC x 1 inch K NUT lock, #10-24 L SCREW - #10-24 x 1-3/4 inch

56 56 FLOAT OPTIMIZER (Attachment) SERIAL # & UP John Deere Combines (Pre 50 Series)

57 FLOAT OPTIMIZER (Attachment) SERIAL # & UP John Deere Combines (Pre 50 Series) 57 REF PART B4500 DESCRIPTION QTY. SERIAL FLOAT OPTIMIZER KIT John Deere (Pre 50 Series) SUPPORT lower mounting bracket ARM sensor mounting ARM upper SPRING torsion INDICATOR gauge, header float INDICATOR rod, header float PIN - spring SUPPORT REF CIRCUIT BOX order John Deere AH ROD linkage CLIP rod end ARM sensing HOLDER - harness HARNESS float optimizer, John Deere (Pre 50 Series)... 1 B BOLT hex head, 3/8 NC x 2 ½ inch C NUT lock, smooth flange, 3/8 NC distorted thread D SCREW self-tapping, 3/8 x 5/8 inch E WASHER flat, 13/32 inch ID F BOLT round head, square neck, 3/8 NC x 2 ¼ inch, thd. full G WASHER flat, 17/32 inch ID H NUT serrated flange lock, 3/8 NC K BOLT large flange head, 3/8 NC x 1 inch BOLT round head, short square neck, 3/8 NC x 3/4 inch L BOLT round head, square neck, 1/4 NC x 2-1/4 inch M NUT hex, lock, 1/4 NC distorted thread

58 58 SEED SAVER (Attachment) EUROPEAN HEADERS

59 SEED SAVER (Attachment) EUROPEAN HEADERS 59 REF PART DESCRIPTION QTY SERIAL B 4254 SEED SAVER European Headers... 1 Kits available through WholeGoods only DEFLECTOR L/H DEFLECTOR R/H DEFLECTOR plastic, front (near cutterbar) SEAL rubber, side DEFLECTOR plastic, rear (header mounted) REF BAR draper seal support, see Feed Draper... 2 A BOLT self tapping, 3/8 NC x 5/8 inch B BOLT round head, square neck, 3/8 NC x 3/4 inch C NUT lock, flange, 3/8 NC D BOLT flange head, 3/8 NC x 3/4 inch

60 60 PLASTIC SKIDS (Attachment) S.N AND BELOW

61 PLASTIC SKIDS (Attachment) 61 REF PART DESCRIPTION QTY SERIAL B 4270 PLASTIC SKIDS KIT 972 Header, 38 deck B 4271 PLASTIC SKIDS KIT 972 Header, 45 deck B 4272 PLASTIC SKIDS KIT 972 Header, 56 deck Kits include items 1 to 4 plus hardware. Available through WholeGoods only STRIP plastic wear, feed pan, 38 deck STRIP plastic wear, feed pan, 45 deck STRIP plastic wear, feed pan, 56 deck SHOE plastic wear, float spring SHOE plastic wear, header end skid LUG cutterbar clip... see note (2) Items 5 & 6 are used with 972 feed pan with cutterbar anchors (prior to 2002 Production). 5 B 2896 PLASTIC WEAR STRIP KIT, 38 deck B 4241 PLASTIC WEAR STRIP KIT, 45 deck B 2897 PLASTIC WEAR STRIP KIT, 56 deck STRIP plastic wear, 38 deck STRIP plastic wear, 45 deck STRIP plastic wear, 56 deck A BOLT round head, square neck, ½ NC x 1 ¼ inch B NUT lock, smooth flange, ½ NC distorted thread C BOLT round head, square neck, 7/16 NC x 1 ¾ inch standard guards BOLT round head, square neck, 7/16 NC x 2 ¾ inch stub guards D BOLT flange head, 3/8 x 5/8 inch, self tapping E BOLT round head, square neck, ½ NC x 1 ¾ inch F BOLT round head, square neck, 5/8 NC x 2 inch without adjustable skid shoe BOLT round head, square neck, 5/8 NC x 2 ½ inch with adjustable skid shoe G WASHER flat, 21/32 inch I.D. J WASHER lock, 5/8 inch K NUT hex, 5/8 NC NOTES: 1. There are three deck sizes; 38, 45 and 56 (approximate feed draper width). Combines using each size are as follows: 38 Case 60 & 66 Series / Gleaner / New Holland TR 45 Case 80 & 88 Series / Cat Lexion 450, 470 & John Deere* / New Holland TX / Cat Lexion 460, 465, 480 & 485 * Some John Deere CTS Combines with dust shields in rice applications may have been converted to 45 decks. Check feed draper width carefully before ordering parts that are specific to one deck size. 2. Quantities for item 4: 38 deck = 6 45 deck = 7 56 deck = 8