PARTS MANUAL. American Dish Service MODELS: ADC-44 L-R/R-L ADS CONVEYOR DISHWASHER EFFECTIVE: MAY, 2008
|
|
- Isaac Thomas
- 5 years ago
- Views:
Transcription
1 EFFECTIVE: MAY, 2008 ADS CONVEYOR DISHWASHER MODELS: ADC-44 L-R/R-L PARTS MANUAL 900 Blake Street Edwardsville, Kansas (913) /08
2 L-R / R-L ADC-44 Conveyor Dishwasher 2
3 L-R / R-L ADC-44 Conveyor Dishwasher Page No. Part No. No. Req. Description Cabinet Assembly, ADC-44, L-R Cabinet Assembly, ADC-44, R-L Conveyor Drive & Tray Track Control, ADC-44, L-R Conveyor Drive & Tray Track Control, ADC-44, R-L Spray System Assembly, ADC-44, L-R Spray System Assembly, ADC-44, R-L Wash Pump Assembly, ADC-44, L-R, R-L Rinse Pump Assembly, ADC-44, L-R Rinse Pump Assembly, ADC-44, R-L Control System Assembly, ADC-44, L-R Control System Assembly, ADC-44, R-L Water Inlet Assembly, ADC-44, L-R Water Inlet Assembly, ADC-44, R-L Heater & Water Level Control, ADC-44, L-R Heater & Water Level Control, ADC-44, R-L Drain System Assembly, ADC-44, L-R Drain System Assembly, ADC-44, R-L N/A Part Number Conversion Table 3
4 Cabinet Assembly ADC-44 L-R 4
5 Cabinet Assembly ADC-44 L-R Ref. No. Part No. No. Req. Description Support, Hood Top Hood Weldment, L-R Hood End Shield Weldment N/S Opt. 2 Vent Weldment, Hood End Shield Rod, Curtain 5/16 x 20.5 Lg Curtain 21 Wide x 17 Tall Curtain 23 Wide x 11 Tall Rod, Curtain 5/16 x 23.5 Lg Door Weldment, Front Access N/S Door Guide, SS Handle Weldment, Front Access Door Latch Weldment, Door Cover Weldment, Rinse Float, L-R Screen Weldment, Rinse Tank Plate, Rinse Stand Tube, L-R Plug Weldment, Rinse Stand Tube N/S Drain Stand Tube, with O-Ring, Rinse Tank Screen Weldment, Wash Tank Large L-R Cover, Wash Manifold Screen Weldment, Wash Small Plate, Wash Pump Filter L-R Filter Weldment, Wash Pump w/taper N/S Filter, Wash Pump with O-Ring Tray, Scrap Trap, Complete Support, Scrap Trap Scrap Trap Guard, Wash Magnet Mount Weldment, Lower, Front Panel Panel Weldment, Front Frame Weldment, L-R Drip Chute Weldment N/S Gasket, Drip Chute Pan Weldment, L-R Cotter Pin, 3/32 x 1 SS 5
6 Cabinet Assembly ADC-44 L-R 6
7 Cabinet Assembly ADC-44 L-R Ref. No. Part No. No. Req. Description Bullet Feet Spacer Weldment, Scrap Trap N/S Gasket, Scrap Trap Spacer Gasket, O Ring Wash/Rinse Taper Filter Screen Weldment, Rinse Pump Switch, Door Cut-Off Bracket, Door Cut-Off N/S Cover, Transfer Chute Weldment Bolt, ¼-20 x ½, TH, SS N/S OBS Baffle, Hood End Shield Vent, OBSOLETE Locknut, ¼-20, SS Locknut, 10-32, SS 7
8 Cabinet Assembly ADC-44 R-L 8
9 Cabinet Assembly ADC-44 R-L Ref. No. Part No. No. Req. Description Support, Hood Top Filter Screen Weldment, Rinse Pump Hood End Shield Weldment N/S Opt-2 Vent Weldment, Hood End Shield Rod, Curtain 5/16 x 20.5 Lg Curtain 21 Wide x 17 Tall Curtain 23 Wide x 11 Tall Rod, Curtain 5/16 x 23.5 Lg Door Weldment, Front Access N/S Door Guide, SS Handle Weldment, Front Access Door Latch Weldment, Door Spacer Weldment, Scrap Trap N/S Gasket, Scrap Trap Spacer Screen, Weldment Tank Cotter Pin, 3/32 x 1 SS Plug Weldment, Rinse Stand Tube N/S Drain Stand Tube with O-Ring, Rinse Tank Screen Weldment, Wash R-L, Large Cover, Wash Manifold Screen Weldment, Wash Small Gasket, O Ring Wash/Rinse Taper Filter Weldment, Wash Pump, w/taper N/S Filter, Wash Pump with O-Ring Tray, Scrap Trap, Complete Support, Scrap Trap Scrap Trap Guard, Wash Magnet Front Panel Mount Weldment, Lower Panel Weldment, Front Frame Weldment, R-L Drip Chute Weldment N/S Gasket, Drip Chute Pan Weldment, R-L 9
10 Cabinet Assembly ADC-44 R-L 10
11 Cabinet Assembly ADC-44 R-L Ref. No. Part No. No. Req. Description Hood Weldment, R-L Cover Weldment, Rinse Float, R-L Plate, Rinse Stand Tube, R-L Plate, Wash Pump Filter, R-L Bullet Feet Switch, Door Cut-Off Bracket, Door Cut-Off N/S Cover, Transfer Chute, Weldment Bolt, ¼-20 x ½, TH, SS Locknut, ¼-20, SS Locknut, 10-32, SS N/S OBS Baffles, Hood End Shield Vent, OBSOLETE 11
12 Conveyor Drive & Tray Track Control, ADC-44 L-R 12
13 Conveyor Drive & Tray Track Control, ADC-44 L-R Ref. No. Part No. No. Req. Description Rocker Arm Weldment Slip Clutch Bar Weldment Spring, Slip Clutch Spacer, Rocker Arm Bushing, Rocker Arm, 1 OD x ¾ ID x 7/8 Lg Block, Pillow Bushing, RH Block, Base, Pillow Bushing Spacer, Conveyor Connecting Bolt Bar, Conveyor N/S Opt. Bar, Side Loader Conveyor N/S Opt. Guide Weldment, Side Loader Bar Dog Weldment, Conveyor Exit Dog Weldment, Conveyor N/S Opt. Side Loader Dog Weldment, Conveyor Idler Arm Weldment Block, Pillow Bushing LH Bushing, Idler Arm, 5/8 OD x 3/8 ID x 5/8 Lg Spacer, Idler Arm, 5/8 OD x 3/8 ID x 3/8 Lg Motor 1/3 HP, 3PH N/S Opt. Motor 1/3 HP, 1PH N/S Cover, Conveyor Drive Motor w/screws Gear Box (53:1) N/S Opt. Gear Box (60:1) Key, Conveyor Drive Motor Key, Cam Block Cam Block (A) Gear Box Side Screw, Set, ¼-20 x ½ Lg Cam Block (B) Cam Follower Side Bolt Lock, Cam Follower Bearing, Cam Follower Bolt, 3/8-16 x 2 Lg, HH, SS Washer, 3/8, Split, SS Bolt, 3/8 x 1, HH, SS Bolt, 5/16-18 x ¾ Lg, HH, SS 13
14 Conveyor Drive & Tray Track Control, ADC-44 L-R 14
15 Conveyor Drive & Tray Track Control, ADC-44 L-R Ref. No. Part No. No. Req. Description Bolt, ½-13 x 1 ¼ Lg, HH, SS Washer, ½, Split, SS Bolt, ½-13 x 4 Lg, HH, SS Locknut, ½ Dog Bolt, 3/8-16 x 1 1/8 with ¾ Shoulder Locknut, 3/8-16 SS Bolt, ¼-20 x 3/8 Lg, HH, SS Washer, ¼, SS Bushing Mount, Idler Arm (A) Bushing Mount, Idler Arm (B) Tray Track Weldment, Rear, L-R Tray Track Weldment, Front L-R Tray Track Sequence Bar Weldment, Rinse Tray Track Sequence Bar Weldment, Wash Magnet Weldment, Tray Track Sequence Bar Bolt, ¼-20 x 1 Lg, HH, SS Locknut, ¼-20, SS Washer, 5/16 Split, SS Locknut, 5/16-18, SS Bracket, Tray Track Mount Dowel Pin 3/16 x 1 Lg, SS Switch, Reed Bracket, Reed Switch N/S Rep Conveyor Drive Motor and Gear Box Assembly N/S Tool Tool, Conveyor Clutch Spring 15
16 Conveyor Drive & Tray Track Control, ADC-44 R-L 16
17 Conveyor Drive & Tray Track Control, ADC-44 R-L Ref. No. Part No. No. Req. Description Rocker Arm Weldment Slip Clutch Bar Weldment Spring, Slip Clutch Spacer, Rocker Arm Bushing, Rocker Arm, 1 OD x ¾ ID x 7/8 Lg Block, Pillow Bushing LH Block, Base, Pillow Bushing Spacer, Conveyor Connecting Bolt Bar, Conveyor N/S Opt. Bar, Side Loader Conveyor N/S Opt. Guide Weldment, Side Loader bar Dog Weldment, Conveyor Exit Dog Weldment, Conveyor N/S Opt. Side Loader Dog Weldment, Conveyor Idler Arm Weldment Block, Pillow Bushing RH Bushing, Idler Arm, 5/8 OD x 3/8 ID x 5/8 Lg Spacer, Idler Arm, 5/8 OD x 3/8 ID x 3/8 Lg Motor, 1/3 HP 3ph N/S Opt. Motor, 1/3 HP 1ph N/S Cover, Conveyor Drive Motor w/screws Gear Box (53:1) N/S Opt. Gear Box (60:1) Old Style Key, Conveyor Drive Motor Key, Cam Block Cam Block (A) Gear Box Side Screw, Set, ¼-20 x ½ Lg Cam Block (B) Cam Follower Side Bolt Lock, Cam Follower Bearing, Cam Follower Bolt, 3/8-16 x 2 Lg, HH, SS Washer, 3/8 Split, SS Bolt, 3/8 x 1 HH, SS Bolt, 5/16-18 x ¾ Lg, HH, SS 17
18 Conveyor Drive & Tray Track Control, ADC-44 R-L 18
19 Conveyor Drive & Tray Track Control, ADC-44 R-L Ref. No. Part No. No. Req. Description Bolt, ½-13 x 1 ¼ Lg HH, SS Washer, ½ Split, SS Bolt ½-13 x 4 Lg HH, SS Locknut, ½ Dog Bolt 3/8-16 x 1 1/8 Lg with ¾ Shoulder Nut, Lock, 3/8-16, SS Bolt, ¼-20 x 3/8 Lg HH, SS Washer, ¼, SS Bushing Mount, Idler Arm (C) Bushing Mount, Idler Arm (D) Washer, 5/16 Split, SS Nut, Lock 5/16-18 SS Bracket, Tray Track Mount Dowel Pin 3/16 x 1 Lg, SS Magnet Weldment, Tray Track Sequence Bar Bolt, ¼-20 x 1 Lg HH, SS Nut, Lock, ¼-20, SS Tray Track Weldment, Rear R-L Tray Track Weldment, Front R-L Tray Track Weldment Sequence Bar, Rinse R-L Tray Track Weldment Sequence Bar, Wash R-L Switch, Reed Bracket, Reed Switch N/S Rep Conveyor Drive Motor and Gear Box Assembly N/S Tool Tool, Conveyor Clutch Spring 19
20 L-R / R-L Spray System Assemblies ADC-44 20
21 L-R / R-L Spray System Assemblies ADC-44 Ref. No. Part No. No. Req. Description Upper Wash Arm Weldment Assembly Handle Weldment, Upper Wash Arm Mount Tee Plate Weldment, Upper Wash Arm Bracket, Upper Wash Arm Mount Lower Wash Arm Weldment Assembly Manifold Weldment, Inside Wash Manifold Weldment, Inside Pumped Rinse Spray Arm Weldment, Pumped Rinse Upper, L-R Spray Arm Weldment, Pumped Rinse Lower, L-R Locknut, ¼-20, SS N/S Spray Arm Endcap Weldment 11A Spray Arm, Final Rinse, Upper, L-R, SS Jets 11B Spray Arm, Final Rinse, Upper, L-R, Poly Jets 11C Spray Arm, Final Rinse, Upper, R-L, SS Jets 11D Spray Arm, Final Rinse, Upper, R-L, Poly Jets 11E Spray Arm Weld., Final Rinse, Upper, L-R, Arm Only 11F Spray Arm Weld., Final Rinse, Upper, R-L, Arm Only 12A Spray Arm, Final Rinse, Lower, L-R, SS Jets 12B Spray Arm, Final Rinse, Lower, L-R, Poly Jets 12C Spray Arm, Final Rinse, Lower, R-L, SS Jets 12D Spray Arm, Final Rinse, Lower, R-L, Poly Jets 12E Spray Arm Weld., Final Rinse, Lower, L-R, Arm Only 12F Spray Arm Weld., Final Rinse, Lower, R-L, Arm Only 13A Jets, Final Rinse Spray Arm, SS 13B Jets, Final Rinse Spray Arm, Poly Cap, ½ FPT, SS Fitting, ½ FPT, 90 Elbow, SS Nipple, ½ x 21 ½ Lg, SS Fitting, ½ x ½ x ½ Tee, SS Nipple, ½ x 3, SS Plug, ½ MPT, SS Nipple, ½ x 1 ½ Lg, SS Spray Arm, Pumped Rinse, Upper, R-L Spray Arm, Pumped Rinse, Lower, R-L 21
22 L-R / R-L Spray System Assemblies ADC-44 22
23 L-R / R-L Spray System Assemblies ADC-44 Ref. No. Part No. No. Req. Description Gasket, O-Ring, Wash Arm Bolt, ¼-20 x ½, SS, HH Handle Weldment, Wash Arm Mount, Lower N/S Tool Tool, Spray Arm Pressure Test w/gauge N/S Tool Tool, Spray Arm Pressure Tester without Gauge 23
24 Wash Pump Assembly ADC-44 L-R/R-L 24
25 Wash Pump Assembly ADC-44 L-R/R-L Ref. No. Part No. No. Req. Description Motor, 3HP, 3 Phase w/shaft Motor, 3HP, 1 Phase w/shaft Housing, Rear, Wash Gasket, Sump Gasket, O-Ring, Drain Socket Flange Sleeve, Wash Pump Shaft Seal, Wash Pump Gasket, Wash Pump O-Ring Impeller, Wash Pump Key, Wash Pump Impeller Bolt, 3/8-16 x 1 Lg, HH, SS, w/lock Strip Washer, 3/8 ID x 1 OD x.103 Thick, SS Cover, Wash Pump Gasket, Wash Pump Discharge Flange Discharge Tube Weldment, Wash Pump Gasket, Wash Pump Intake Flange Intake Tube, Sump Weldment, Wash Pump Drain Socket Weldment, Wash Gasket, Wash Tank Flange Petcock, ¼ MPT Bolt, ¼-20 x ½ Lg, HH, SS Washer, ¼ SS Bolt, 3/8-16 x 1 Lg, HH, SS Washer, 3/8 ID x 1 OD x.103 Thick, SS Bolt, 5/16-18 x 1 ½ Lg, HH, SS Washer, 5/16, SS Washer, 3/8 Split, SS Bolt, 5/16-18 x ½, HH, SS N/S Rep Pump Assy. Less Cover, Wash, 3HP, 3 Phase N/S Rep Pump Assy. Less Cover, Wash, 3HP, 1 Phase O-Ring, Wash Pump Shaft Sleeve N/S Washer, 5/16 SS Neobond (For Inside of Pump Discharge) 25
26 L-R / R-L Rinse Pump Assembly ADC-44 26
27 L-R / R-L Rinse Pump Assembly ADC-44 Ref. No. Part No. No. Req. Description Motor, 1/3 HP, 3 Phase Motor, 1/3 HP, 1 Phase Housing, Pumped Rinse Rear Plate, Pump Rinse Motor Support, w/pad Pump Shaft, Pumped Rinse Set Screw, ¼-20 x 3/8 Lg Seal, Pumped Rinse Pump Gasket, Pumped Rinse Pump Impeller, Pumped Rinse Pump Bolt, ¼-28 x 3/8 Lg HH, SS Washer,.285 ID x.625 OD x.086 Thick, SS Discharge Tube Weldment L-R Gasket, Pumped Rinse Pump Flange Discharge Flange Assembly Weldment Cover, Pumped Rinse Pump Intake Flange Weldment Assembly Intake Tube Weldment Discharge Tube Weldment R-L Bolt, 3/8-16 x 7/8 HH, SS Bolt, ¼-20 x ¾ HH, SS Washer, ¼, SS Locknut, ¼-20, SS Petcock, 1/8 MPT N/S Rep Kit, Rinse Pump Seal N/S Rep Pump Assy. Less Cover, Rinse, 1/3HP, 3 Phase N/S Rep Pump Assy. Less Flanges, Rinse, 1/3HP, 3 Phase N/S Rep Pump Assy. Less Cover, Rinse, 1/3HP, 1 Phase 27
28 L-R / R-L Control System Assembly ADC-44 28
29 L-R / R-L Control System Assembly ADC-44 Ref. No. Part No. No. Req. Description Control Box Weldment Control Box Mounts Bracket, Temperature Gauge Gauge, Temperature, Wash & Rinse Tank Gauge, Temperature, Final Rinse 6A Terminal Block (Main 4 Pole) 6B Opt. Terminal Block (Main 2 Pole Single Phase) Transformer w/jumper Wires N/S Fuse, 3 amp, Primary N/S Fuse, 1 6/10 amp, Secondary Cover Weldment, Control Box 9A Circuit Breaker, 50 amp, 3 Pole 9B Opt. Circuit Breaker, 20 amp, 2 Pole 9C Opt. Circuit Breaker, 60 amp, 2 Pole Contactor 11A Overload, 3HP, 3 Phase 11B Opt. Overload, 3HP, 1 Phase 12A Overload, 1/3HP, 3 Phase 12B Opt. Overload, 1/3HP, 1 Phase Socket, Relay Relay, 110V, Double Pole Din Rail, 18 Lg Power Box Weldment Cover, Power Box Relay, Mercury, 50 amp, Wash Heater Relay, Mercury, 30 amp, Rinse Heater Light, Heater Wingnut, ¼-20, SS Switch, Door Cut-Off Bar, Control Box Safety Switch, Master Boot, Master Switch Cover N/S Light, Indicator Locknut, ¼-20 29
30 L-R / R-L Control System Assembly ADC-44 30
31 L-R / R-L Control System Assembly ADC-44 Ref. No. Part No. No. Req. Description Bolt, ¼-20 x ½ HH, SS N/S Relay, Time Delay, 6 Second N/S Switch, Reed N/S Opt. Counter, Rack Timer N/S Opt. Bracket, Rack Timer Counter N/S Ground Lug N/S Plate, 110V Terminal Block N/S Block, Terminal, Chemical Dispenser, 2 Pole N/S Block, Terminal, 6 Pole (White Wires) N/S Block, Terminal, 6 Pole (Black Wires) N/S Opt. Kit, Table Limit Switch N/S Opt. Kit, Rack Timer N/S Nameplate, ADS N/S Gasket Material, Control Box, 78 (Cut from ) N/S Decal, NSF (244 Racks) N/S Rep. Decal, NSF (216 Racks) (Replacement Part) N/S Rep. Decal Set, ADC-44 (Replacement Part) N/S Wall Chart, Cleaning, ADS N/S Opt. Switch Only, Table Limit N/S Wire Harness, 3 Phase N/S Opt. Wire Harness, 1 Phase N/S Shield for Contactor Overload (Anti-Tamper) N/S Rep. Temp Gauge Cover, Screw-On N/S Control Box Lock N/S Control Box Dummy Lock N/S Bell Box N/S Bell Box Cover N/S Bracket, Conduit (Rear of Machine) N/S Decal, Label Set (Blue & Gray) (Temp. Gauge Bracket) N/S Decal, Label Set (Yellow & Black, Inside Control Box) N/S Decal, Temp Gauge, Final Rinse, 180 N/S Decal, Wiring Diagram 31
32 L-R / R-L Water Inlet Assembly ADC-44 32
33 L-R / R-L Water Inlet Assembly ADC-44 Ref. No. Part No. No. Req. Description Fitting, ¾ Street Elbow, Y-Line Strainer, ¾ Line Strainer Screen, ¾ Nipple, ¾ Close, Brass Tee, ¾ x ½ x ½ Brass Bracket, Plumbing Valve, Water Solenoid Bolt, U, ¼ Pressure Regulator, ½ Vacuum Breaker, ½ Nipple, ½ x 6 Lg, Brass Nipple, ½ x 9 ½ Lg, Brass Pipe Locknut, ½ FPT, Brass Elbow, ½ Street, Tee, ½ x ½ x ½, Brass Temperature Gauge, Final Rinse Reducer Bushing, ½ MPT x ¼ FPT, Brass Service Cock Pressure Gauge Nipple, ½ x 1 ½ Lg, Brass Nipple, ½ x 2 Lg, Brass Fitting, ½ Elbow, Reducer Bushing, ½ MPT x 1/8 FPT Plug, 1/8 MPT, Brass Nipple, ½ x 1 ½ Lg, BSS Fitting, Elbow, ½ FPT, SS Nipple, ½ x 6 Lg, SS Nipple, ½ x Close, SS Union, ½, SS 30A Mixing Chamber, SS 30B Opt. Mixing Chamber, Polymer Nipple, ½ x 3 Lg, SS Tee, ½ x ½ x ½, SS 33
34 L-R / R-L Water Inlet Assembly ADC-44 34
35 L-R / R-L Water Inlet Assembly ADC-44 Ref. No. Part No. No. Req. Description Plug, ½ MPT, SS 34A Duct Weldment, Inlet Water, L-R 34B Duct Weldment, Inlet Water, R-L N/S Rep. Cap Assembly, Bonnet & Tube, Water Solenoid, ½ N/S Rep. Valve, Less Coil, Water Solenoid, ½ N/S Rep. Kit, Vacuum Breaker Repair, Watts ½ N/S Rep. Cap, Vacuum Breaker, Watts ½ N/S Rep. Bonnet & Stem, Vacuum Breaker, Watts ½ N/S Rep. Kit, Pressure Regulator, ½ (Replacement) N/S Rep. Kit, Water Solenoid Valve, ½ (Replacement) N/S Rep. Coil, Water Solenoid, ½ (Replacement) N/S Rep. Water Inlet Assembly R-L w/final Rinse Arms N/S Rep. Water Inlet Assembly L-R w/final Rinse Arms 35
36 Heater & Water Level Control ADC-44 L-R 36
37 Heater & Water Level Control ADC-44 L-R Ref. No. Part No. No. Req. Description Float Box Weldment, LH 2A Float Switch, w/holder & Button 2B Float Switch, Switch Only 2C Float Switch Holder 2D Float Switch Holder Button Float Box Cover Float Switch Flipper Weldment Float Rod Tube Weldment, Wash, L-R Float Rod, Wash Float Weldment Bracket, Float Retainer 9A Heater, Wash, 12KW, 3 Phase 9B Heater, Wash, 8KW, 1 Phase Float Box Weldment, RH Float Rod Tube Weldment Rinse, L-R Float Rod Rinse Filter Weldment, Pumped Rinse Pump 14A Heater, Rinse, 2.25KW 3 Phase 14B Heater, Rinse, 2.25KW 1 Phase Thermostat Heater Box Cover Locknut, 8-32, SS Washer, 5/16, SS Neobond Bolt, 5/16-18 x 1 LG HH, SS Locknut, 5/ Gasket, Heater N/S Flange, Heater Sandwich (1 ½ Hole) N/S Washer, Float Switch Rod, ¾ OD x 1/8 ID, SS 37
38 Heater & Water Level Control ADC-44 R-L 38
39 Heater & Water Level Control ADC-44 R-L Ref. No. Part No. No. Req. Description Float Box Weldment, LH 2A Float Switch, w/holder & Button 2B Float Switch Only 2C Float Switch Holder 2D Float Switch Holder Button Float Box Cover Float Switch Flipper Weldment Float Rod Tube Weldment, Wash, R-L Float Rod, Wash Float Weldment Bracket, Float Retainer 9A Heater, Wash, 12KW, 3 Phase 9B Heater, Wash, 8KW, 1 Phase Float Box Weldment, RH Float Rod Tube Weldment, Rinse, R-L Float Rod, Rinse Filter Weldment, Pumped Rinse Pump 14A Heater, Rinse, 2.25KW, 3 Phase 14B Heater, Rinse, 2.25KW, 1 Phase Thermostat Heater Box Cover Locknut, 8-32, SS Washer, 5/16, SS, Neobond Bolt, 5/16-18 z 1 Lg HH, SS Locknut, 5/ Gasket, Heater N/S Flange, Heater Sandwich (1 ½ Hole) N/S Washer, Float Switch Rod, ¾ OD x 1/8 ID 39
40 L-R / R-L Drain System Assembly ADC-44 40
41 L-R / R-L Drain System Assembly ADC-44 Ref. No. Part No. No. Req. Description No-Hub Connector, Fitting to Pipe Intake Tube, Sump Weldment, Wash Pump Drain Socket Weldment, Wash No-Hub Connector, Pipe to Pipe Gasket, O-Ring, Drain Socket Flange Gasket, Wash Pump Intake Flange Gasket, Sump Copper Drain Weldment, Rinse Side 9A Copper Drain Weldment, Wash Side, L-R 9B Copper Drain Weldment, Wash Side, R-L Drain Assembly, Copper with No-Hubs, L-R Drain Assembly, Copper with No-Hubs, R-L Rinse Drain Socket Weldment Gasket, Rinse Drain Socket Flange 41
42 Manufacturer of low and high temperature Commercial Dishwashers and Glasswashers 900 Blake Street Edwardsville, Kansas Ph:(913) Fax:(913)
PARTS MANUAL. American Dish Service ADS CONVEYOR DISHWASHER MODELS: ADC-66 L-R/R-L EFFECTIVE: MAY, 2011
EFFECTIVE: MAY, 2011 ADS CONVEYOR DISHWASHER MODELS: ADC-66 L-R/R-L PARTS MANUAL 900 Blake Street Edwardsville, Kansas 66111 (913)422-3700 05/08 213-0066 L-R / 214-0066 R-L ADC-66 Conveyor Dishwasher 2
More informationPARTS MANUAL. American Dish Service ADS CONVERTIBLE DISHWASHER MODELS: AF3DS / AFC3DS. EFFECTIVE: April, 2014
EFFECTIVE: April, 2014 ADS CONVERTIBLE DISHWASHER MODELS: AF3DS / AFC3DS PARTS MANUAL 900 Blake Street Edwardsville, Kansas 66111 (913)422-3700 05/08 026-0090 / 027-0090 Models: 2 026-0090 / 027-0090 Models:
More informationPARTS MANUAL. American Dish Service ADS CONVERTIBLE DISHWASHER MODELS: AF3D / AFC3D EFFECTIVE: APRIL 1, 2002
EFFECTIVE: APRIL 1, 2002 ADS CONVERTIBLE DISHWASHER MODELS: PARTS MANUAL 900 Blake Street Edwardsville, Kansas 66111 (913)422-3700 019-0090 / 020-0090 Models: 2 019-0090 / 020-0090 Models: Ref. No. Part
More informationwww.cmadishmachines.com Table of Contents CMA-44 1. PARTS MANUAL... 4 1.1. Initial Parts Kit (P/N 13996.81)... 4 1.2. Initial Parts Kit (P/N 13996.80)... 5 1.3. Exploded View Drawings... 6 1.3.1. Cabinet
More informationwww.cmadishmachines.com Table of Contents CMA-66 1. PARTS MANUAL... 4 1.1. Initial Parts Kit (P/N 13996.81)... 4 1.2. Initial Parts Kit (P/N 13996.80)... 5 1.3. Exploded View Drawings... 6 1.3.1. Cabinet
More informationMODEL CMA-44 PARTS MANUAL Rev 2.13
MODEL CMA-44 PARTS MANUAL Rev 2.13 CMA DISHMACHINES 12700 KNOTT AVENUE GARDEN GROVE, CALIFORNIA 92841 800-854-6417 FAX 714-895-2141 www.cmadishmachines.com Table of Contents CMA-44 1. PARTS MANUAL... 4
More informationRev.2.06A www.cmadishmachines.com Table of Contents EST-44 1. PARTS MANUAL... 3 1.1. Initial Parts Kit... 3 1.2. Exploded View Drawings... 4 1.2.1. Cabinet Assembly... 4 1.2.2. Control Box Assembly (3
More informationRev.2.05 www.cmadishmachines.com Table of Contents EST-44 1. PARTS MANUAL... 3 1.1. Initial Parts Kit... 3 1.2. Exploded View Drawings... 4 1.2.1. Cabinet Assembly... 4 1.2.2. Control Box Assembly... 5
More informationMODELS CMA-180/180TALL Including 480V MACHINES PARTS MANUAL Rev 2.08A
MODELS CMA-180/180TALL Including 480V MACHINES PARTS MANUAL Rev 2.08A C M A D I S H M A C H I N E S 1 2 7 0 0 K N O T T A V E N U E GARDEN GROVE, CALIFORNIA 92841 800-8 5 4-6 4 1 7 FAX 714-895-2141 www.cmadishmachines.com
More informationMODEL CMA-180UC PARTS MANUAL Rev 1.19A
MODEL CMA-180UC PARTS MANUAL Rev 1.19A C M A D I S H M A C H I N E S 1 2 7 0 0 K N O T T A V E N U E GARDEN GROVE, CALIFORNIA 92841 800-8 5 4-6 4 1 7 FAX 714-895-2141 wwwcmadishmachines.com TABLE OF CONTENTS
More informationMODEL CMA-180UC PARTS MANUAL Rev 1.19
MODEL CMA-180UC PARTS MANUAL Rev 1.19 CMA DISHMACHINES 12700 KNOTT AVENUE GARDEN GROVE, CALIFORNIA 92841 800-854- 6417 FAX 714-895-2141 wwwcmadishmachines.com TABLE OF CONTENTS MODEL CMA-180UC 1. PARTS
More informationMODEL CMA-181GW PARTS MANUAL Rev 1.00B
MODEL CMA-181GW PARTS MANUAL Rev 1.00B C M A D I S H M A C H I N E S 1 2 7 0 0 K N O T T A V E N U E GARDEN GROVE, CALIFORNIA 92841 800-8 5 4-6 4 1 7 FAX 714-895-2141 wwwcmadishmachines.com TABLE OF CONTENTS
More informationMODELS EAH / EC/E TALL/3-Door Parts Manual Revision 1.04A
MODELS EAH / EC/E TALL/3-Door Parts Manual Revision 1.04A CMA DISHMACHINES 12700 KNOTT STREET GARDEN GROVE, CALIFORNIA 92841 800-854- 6417 FAX 714-895-2141 www.cmadishmachines.com TABLE OF CONTENTS PARTS
More informationMODELS EAH / EC/E TALL/3-Door Parts Manual Revision 1.03B
MODELS EAH / EC/E TALL/3-Door Parts Manual Revision 1.03B C M A D I S H M A C H I N E S 1 2 7 0 0 K N O T T S T R E E T GARDEN GROVE, CALIFORNIA 92841 800-8 5 4-6 4 1 7 FAX 714-895-2141 www.cmadishmachines.com
More informationSECTION 6: PARTS SECTION
PREWASH & WASH PUMP WELDMENTS Intake Suction Scoop Weldment 05700-021-87-60 Prewash Intake Strainer Weldment 05700-021-74-96 Wash Pump Weldment 05700-041-68-88 Prewash Strainer Bracket 05700-021-74-94
More informationMODELS AH/B/C/Scullery/Pizza/Bowl PARTS MANUAL Rev 1.03B
MODELS AH/B/C/Scullery/Pizza/Bowl PARTS MANUAL Rev 1.03B C M A D I S H M A C H I N E S 1 2 7 0 0 K N O T T A V E N U E GARDEN GROVE, CALIFORNIA 92841 800-8 5 4-6 4 1 7 FAX 714-895-2141 TABLE OF CONTENTS
More informationM O D E L S E S T / E S T T A L L PARTS MANUAL Rev 1.08 C M A D I S H M A C H I N E S K N O T T S T R E E T GARDEN GROVE, CALIFORNIA 92841
M O D E L S E S T / E S T T A L L PARTS MANUAL Rev 1.08 C M A D I S H M A C H I N E S 1 2 7 0 0 K N O T T S T R E E T GARDEN GROVE, CALIFORNIA 92841 800-8 54-6 4 1 7 FAX 714-895-2141 www.cmadishmachines.com
More informationMODEL GLC PARTS MANUAL REV.1.02A
Owner s Manual Keep with machine for reference MODEL GLC PARTS MANUAL REV.1.02A CMA DISHMACHINES 12700 KNOTT AVENUE GARDEN GROVE, CALIFORNIA 92841 800-854-6417 FAX 714-8 95-2 141 MODEL GL-C Parts MANUAL
More informationMODELS EAH / EC/E TALL/3-Door Parts Manual Revision 1.04B
MODELS EAH / EC/E TALL/3-Door Parts Manual Revision 1.04B C M A D I S H M A C H I N E S 1 2 7 0 0 K N O T T S T R E E T GARDEN GROVE, CALIFORNIA 92841 800-8 5 4-6 4 1 7 FAX 714-895-2141 www.cmadishmachines.com
More informationM O D E L S EST- FL PARTS MANUAL Rev 1.00A
M O D E L S EST- FL PARTS MANUAL Rev 1.00A C M A D I S H M A C H I N E S 1 2 7 0 0 K N O T T S T R E E T GARDEN GROVE, CALIFORNIA 92841 800-8 5 4-6 4 1 7 FAX 714-895-2141 www.cmadishmachines.com TABLE
More informationMODELS AH/B/C/Scullery/Pizza/Bowl PARTS MANUAL Rev 1.04B
MODELS AH/B/C/Scullery/Pizza/Bowl PARTS MANUAL Rev 1.04B C M A D I S H M A C H I N E S 1 2 7 0 0 K N O T T A V E N U E GARDEN GROVE, CALIFORNIA 92841 800-8 5 4-6 4 1 7 FAX 714-895-2141 TABLE OF CONTENTS
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS MODEL LT1 DISHWASHER ML-104239 A product of HOBART 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 18581 Rev. B (October 2005) Table of Contents 3 CHEMICAL DETECTION BOX 5 CONTROL
More informationMODEL GL-X PARTS MANUAL
MODEL GL-X PARTS MANUAL Rev. 1.03A CMA DISHMACHINES 12700 KNOTT AVENUE GARDEN GROVE, CALIFORNIA 92841 800-854-6417 FAX 714-8 95-2 141 www.cmadishmachines.com TABLE OF CONTENTS MODEL CMA-GL-X 1. PARTS MANUAL...3
More informationMODELS EAH / EC/E TALL/3-Door Parts Manual Revision 1.05A
MODELS EAH / EC/E TALL/3-Door Parts Manual Revision 1.05A C M A D I S H M A C H I N E S 1 2 7 0 0 K N O T T S T R E E T GARDEN GROVE, CALIFORNIA 92841 800-8 5 4-6 4 1 7 FAX 714-895-2141 www.cmadishmachines.com
More informationM O D E L S E S T / E S T T A L L PARTS MANUAL Rev 1.07B C M A D I S H M A C H I N E S K N O T T S T R E E T GARDEN GROVE, CALIFORNIA 92841
M O D E L S E S T / E S T T A L L PARTS MANUAL Rev 1.07B C M A D I S H M A C H I N E S 1 2 7 0 0 K N O T T S T R E E T GARDEN GROVE, CALIFORNIA 92841 800-8 5 4-6 4 1 7 FAX 714-895-2141 www.cmadishmachines.com
More informationPARTS LIST, COUNTER CONVECTION STEAMERS MODELS SN-3E, SN-4E, SN-5E PARTS LIST COUNTER CONVECTION STEAMERS BLODGETT MODELS: SN-3E SN-4E
PARTS LIST COUNTER CONVECTION STEAMERS BLODGETT MODELS: SN-3E SN-4E November 27, 2013 BLODGETT OVEN CO 44 lakeside Ave Burlington, VT 05446 Tel. 802-658-6600 Fax 802-860-3732 www.blodgett.com 1 2013-11-27
More informationMODEL L-1X & L-1X16 PARTS MANUAL
MODEL L-1X & L-1X16 PARTS MANUAL Rev 1.17A CMA DISHMACHINES 12700 KNOTT AVENUE GARDEN GROVE, CALIFORNIA 92841 800-854-6417 FAX 714-8 95-2 141 TABLE OF CONTENTS MODEL CMA-L-1X & L-1X16 1. PARTS MANUAL...3
More informationMODEL L-1X & L-1X16 PARTS MANUAL. Rev 1.19A C M A D I S H M A C H I N E S K N O T T A V E N U E GARDEN GROVE, CALIFORNIA 92841
MODEL L-1X & L-1X16 PARTS MANUAL Rev 1.19A C M A D I S H M A C H I N E S 1 2 7 0 0 K N O T T A V E N U E GARDEN GROVE, CALIFORNIA 92841 800-854- 6417 F A X 7 1 4-8 9 5-2141 www.cmadishmachines.com TABLE
More informationMODEL EVA PARTS MANUAL Rev.1.03
MODEL EVA PARTS MANUAL Rev.1.03 CMA DISHMACHINES 12700 KNOTT AVENUE GARDEN GROVE, CALIFORNIA 92841 800-854-6417 FAX 714-895-2141 www.cmadishmachines.com TABLE OF CONTENTS MODEL EVA 1. PARTS MANUAL...3
More informationMODEL EVA PARTS MANUAL Rev.1.05
MODEL EVA PARTS MANUAL Rev.1.05 CMA DISHMACHINES 12700 KNOTT AVENUE GARDEN GROVE, CALIFORNIA 92841 800-854-6417 FAX 714-895-2141 www.cmadishmachines.com TABLE OF CONTENTS MODEL EVA 1. PARTS MANUAL...3
More informationCOMPACT RACK TYPE DISHWASHER
SPARE PARTS CATALOG ELECTROLUX PROFESSIONAL COMPACT RACK TYPE DISHWASHER 44 66 Models Affected: Electrolux Part Number Description 534034 ECRT66R208 534035 ECRT66L208 534036 ECRT66R240 534037 ECRT66L240
More informationMODEL L-1X & L-1X16 PARTS MANUAL
MODEL L-1X & L-1X16 PARTS MANUAL Rev 1.14 CMA DISHMACHINES 12700 KNOTT AVENUE GARDEN GROVE, CALIFORNIA 92841 800-854-6417 FAX 714-8 95-2 141 TABLE OF CONTENTS MODEL CMA-L-1X & L-1X16 1. PARTS MANUAL...3
More informationCATALOG OF REPLACEMENT PARTS C24EA SERIES STEAMER 3-PAN BASIC. ML /240 V. 8.5kW ML V. 8.5kW 3-PAN PRO
CATALOG OF REPLACEMENT PARTS C24EA SERIES STEAMER 3-PAN BASIC ML-136043 208/240 V. 8.5kW ML-136045 480 V. 8.5kW 3-PAN PRO ML-136037 208/240 V. 9.25kW ML-136044 480 V. 9.25kW ML-152030 3-PAN LWE 5-PAN BASIC
More information14A6816H190 GT-2150 (2003) Page 1 of 28 Carburetor
14A6816H190 GT-2150 (2003) Page 1 of 28 Carburetor 14A6816H190 GT-2150 (2003) Page 2 of 28 Carburetor TC-640221 1 /P Carburetor (Incl 184 of Engine Parts Lists) 1 TC-640216 1 Throttle Shaft & Lever Assembly
More informationHobart Model AM Dishwasher
CONDUIT (R.H. CONTROLS) PL-18580 NO. NAME OF PART AMT. 1 P-77657-38 Conduit - 3/4" x 32" (Waterproof) 1 2 FE-8-25 Connector-90 0 Sealtite" (3/4" Male Thd. x 3/4" Flex.Cnd.) 1 3 FE-8-11 3/4"Gasket Any 1
More informationSECTION 6 PARTS LIST
SECTION FIGURE NO. DESCRIPTION PAGE NO. -1 - - -4-5 - - -8-9 Oven Panels, Window and Legs Exploded Drawing Air Finger Exploded Drawing Control Panel Exploded Drawing Blower and Shroud Exploded Drawing
More informationSURE JET ENVELOPE FINISHING SYSTEM MODEL EFS
SURE JET ENVELOPE FINISHING SYSTEM MODEL EFS SURE JET VACUUM BASE SJVB SURE JET VACUUM BASE SJDB-EXT Parts Manual SJ_EFS-PARTSBOOK051507reva 1 TABLE OF CONTENTS ENVELOPE FINISHING SYSTEM- SURE JET EFS-SURE
More informationETP-5E & ETP-10E ECO-TECH PLUS ELECTRIC CONVECTION STEAMER PARTS AND SERVICE MANUAL
ETP-5E & ETP-10E ECO-TECH PLUS ELECTRIC CONVECTION STEAMER PARTS AND SERVICE MANUAL EFFECTIVE JANUARY 10, 2018 Superseding All Previous Parts Lists. The Company reserves the right to make substitution
More informationAM-12E AM-12EC AM-12EF AM-12ER
Warewash AM-12E AM-12EF AM-12ER Spare Parts Pièces Détachées Ersatzteile Onderdelen Thi s document is the property of Hobart Manufacturing.Reproductionof this document is prohibited without the written
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS C24GA6 & C24GA10 Gas Convection Steamers C24GA6 ML-136056 C24GA10 ML-136057 C24GA6 ML-136021 C24GA10 ML-136022 VULCAN-HART DIVISION OF ITW FOOD EQUIPMENT GROUP, LLC 3600 NORTH
More informationS/N 1H019H - 1H310H Page 1 of 33 46" Cutting Deck Assembly
1180 S/N 1H019H - 1H310H Page 1 of 33 46" Cutting Deck Assembly 1180 S/N 1H019H - 1H310H Page 2 of 33 46" Cutting Deck Assembly 1 17982 1 S Reinforcement Spindle Plate 2 618-0430 1 S Spindle Assembly w/
More informationPITNEY BOWES FLEXIBLE INK JET TRANSPORT 36 FIT BASE: FIT-36. Parts Manual. (BOM: FIT36rev1.0) FIT-36parts_rev0 1
FLEXIBLE INK JET TRANSPORT 36 FIT BASE: FIT-36 Parts Manual (BOM: FIT36rev1.0) FIT-36parts_rev0 1 VERSION HISTORY The table below summarizes the history of this document as it is published onto the company
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS OV500 ELECTRIC RACK OVENS ML-132501 ML-132499 OV500E1 OV500E2 A product of BAXTER MFG. CO., INC. 19220 STATE ROUTE 162 EAST, ORTING, WA 98360 FORM 43203 Rev. B (June 2015)
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS COMBI GAS OVENS MODELS ML-126836 ML-126837 ML-126838 VCG10H VCG10F VCG20H For additional information on Vulcan-Hart Company or to locate an authorized parts and service provider
More informationWasher-Extractor Pocket Hardmount
Washer-Extractor Pocket Hardmount Refer to Page 3 for Model Numbers Parts Models UW60P2 and UW60P3 Model UW60B2 PHM1411C_F232166 www.alliancelaundry.com Part No. F232166R15 November 2013 Table of Contents
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS OV300E MINI RACK OVEN ML-132155 OV300E A product of BAXTER MFG. CO., INC. 19220 STATE ROUTE 162 EAST, ORTING, WA 98360 FORM 43051 Rev. C (July 2017) F-43051 Rev. C (July 2017)
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS HPC PROOFER AND HRP RETARDER/PROOFER HPC100 ML-132156 HRP100 ML-132209 ML-132157 ML-132210 ML-132158 ML-132211 ML-132159 ML-132212 ML-132160 ML-132213 ML-132161 ML-132214 ML-132162
More informationWasher-Extractor. Parts. Twin Tub. UM202 - Design 2 and 3 Models. Design 2 Models. Design 3 Models CAR5C_F232208
Washer-Extractor Twin Tub UM202 - Design 2 and 3 Models Parts Design 2 Models Design 3 Models CAR5C_F232208 www.alliancelaundry.com Part No. F232208R12 November 2014 Table of Contents Title Page Parts
More informationMK IV OVERHEAD DOOR REPLACEMENT PARTS BOOK
MK IV OVERHEAD DOOR REPLACEMENT PARTS BOOK JAMISON DOOR COMPANY P.O. BOX 70 HAGERSTOWN, MARYLAND 21740 1-800-532-3667 301-733-3100 INTERNET: http://www.jamisondoor.com E-MAIL: contact@jamisondoor.com ECN
More informationMODEL L-1C PARTS MANUAL. Rev 1.00A C M A D I S H M A C H I N E S K N O T T A V E N U E GARDEN GROVE, CALIFORNIA
MODEL L-1C PARTS MANUAL Rev 1.00A C M A D I S H M A C H I N E S 1 2 7 0 0 K N O T T A V E N U E GARDEN GROVE, CALIFORNIA 92841 800-854- 6417 F A X 7 1 4-8 9 5-2141 www.cmadishmachines.com TABLE OF CONTENTS
More informationPITNEY BOWES FLEXIBLE INK JET TRANSPORT 56 FIT BASE: FIT-56. Parts Manual. (BOM: FIT-56revA) FIT-56parts_rev0 1
FLEXIBLE INK JET TRANSPORT 56 FIT BASE: FIT-56 Parts Manual (BOM: FIT-56revA) FIT-56parts_rev0 1 VERSION HISTORY The table below summarizes the history of this document as it is published onto the company
More information400 4x4 Euro MODEL NUMBER A2008IDG4BEUR (RED) MODEL NUMBER A2008IDG4BEUG (GREEN) MODEL NUMBER A2008IDG4BEUZ (CAT GREEN) MORE TO GO ON.
2008 400 4x4 Euro Illustrated Parts Manual MODEL NUMBER A2008IDG4BEUR (RED) MODEL NUMBER A2008IDG4BEUG (GREEN) MODEL NUMBER A2008IDG4BEUZ (CAT GREEN) MORE TO GO ON. TM TABLE OF CONTENTS 2008 ATV 400 4x4
More information2500/2700 Series Gas Convection Oven
MARKET FORGE 2500/2700 Series Gas Convection Oven 2500/2700 Series Gas Convection Oven 2500 2700 2592 2792 Control Panel Assembly 1 99-4209 Control Panel Assembly Complete (Excluding Thermostat) 2 10-6307
More informationWasher-Extractor. Parts. Pocket Hardmount. Refer to Page 3 for Model Numbers. Models UW60P2 and UW60P3.
Washer-Extractor Pocket Hardmount Refer to Page 3 for Model Numbers Parts Models UW60P2 and UW60P3 Model UW60B2 PHM1411C_F232166 www.alliancelaundry.com Part No. F232166R16 August 2017 Table of Contents
More informationPARTS LIST PRESSURELESS COOKER MODELS: GSX-5HE, GSX-7HE, GSX-10HE
PARTS LIST PRESSURELESS COOKER MODELS: 5HE, 7HE, 10HE CROWN FOOD SERVICE EQUIPMENT LTD. 70 OAKDALE ROAD, DOWNSVIEW, (TORONTO), ONTARIO, M3N 1V9 TELEPHONE: (416) 746-2358, FAX: (416) 746-8324 PRINTED IN
More informationCATALOG OF REPLACEMENT PARTS C24GA6 & C24GA10 GAS CONVECTION STEAMERS PRIOR MLS COVERED IN THIS MANUAL
CATALOG OF REPLACEMENT PARTS C24GA6 & C24GA10 GAS CONVECTION STEAMERS C24GA6 C24GA10 ML-136056 ML-136057 PRIOR MLS COVERED IN THIS MANUAL C24GA6 C24GA10 ML-136021 ML-136022 For additional information on
More information36/60/160/260 L Series Gas Ranges
VULCAN L Series Gas Ranges 36/60/160/260 L Series Gas Ranges 34 THRU 41 1 5 51 52 26 42 THRU 49 55-56-57 2-3-4 33 31-32 25 29-30 27 15 PL-53065 14 13 12 28 24 23 22 21 20 19 18 16 17 52 11 10 9 8 7 6 632
More informationPLUMBING PARTS CATALOG
PREMIUM J0 PLUMBING PARTS CATALOG PUMP J0 Pump/Motor * 6 0 9 * 600- HOUSING: FRONT 600-90 O-RING: FRONT HOUSING 600-9 IMPELLER:. DIA 600-0 PUMP: SEAL ASSY / VITON 600- HOUSING: REAR BRACKET 6 600- MOTOR:.HP
More information400 2x4/4x4 EFT SHARE OUR PASSION ṬM
SHARE OUR PASSION ṬM 400 2x4/4x4 EFT Model Number A2009IDG2BETR (Red - 2x4) Model Number A2009IDG2BETZ (Cat Green - 2x4) Model Number A2009IDG4BETR (Red - 4x4) Model Number A2009IDG4BETG (Green - 4x4)
More informationS/N 1H019H - 1H310H Page 1 of 48 42" Cutting Deck Assembly
1170 S/N 1H019H - 1H310H Page 1 of 48 42" Cutting Deck Assembly 1170 S/N 1H019H - 1H310H Page 2 of 48 42" Cutting Deck Assembly 4 683-0254 1 S Deck Adjustment Bracket w/ Weld Nut 9 710-0528 1 /P Hex Cap
More information13A2693G190 LT-165 (2003) Page 1 of 31 Carburetor
13A2693G190 LT-165 (2003) Page 1 of 31 Carburetor 13A2693G190 LT-165 (2003) Page 2 of 31 Carburetor TC-640330 1 S Carburetor (Incl 184 of Engine Parts Lists) 1 TC-640035 1 Throttle Shaft & Lever Assembly
More informationCascade. Aqua-Aire. Standard & Swivel Lift Spas, Optional Reservoir. Parts Breakdown & Assemblies Right, Left, and End Tub Access Door Systems
Cascade Aqua-Aire Standard & Swivel Lift Spas, Optional Reservoir Parts Breakdown & Assemblies Right, Left, and End Tub Access Door Systems X= Color, L- Left, W= Wide, T= Swivel Lift TUBS: 360010-X, 360010-XL,
More informationPITNEY BOWES Sure-Feed Engineering SURE JET MODEL SJVB - TUV. Parts Manual. SJVB-TUVparts 1
SURE JET MODEL SJVB - TUV Parts Manual SJVB-TUVparts 1 TABLE OF CONTENTS SURE JET- SJVB-TUV SURE JET VACUUM BASE ASSEMBLY (FIG. 1)..... 5 FRAME ASSEMBLY (FIG. 2). 7 CONVEYOR DRIVE ASSEMBLY (FIG. 3).. 9
More informationPARTS MANUAL. SERIAL NO: to BAND SAWING MACHINE
PARTS MANUAL MODEL: TF-2025M SERIAL NO: 543-99101 to BAND SAWING MACHINE MACHINE SPECIFICATIONS MODEL VOLTAGE CYCLE PHASE SERIAL NO. For your information and future reference, insert pertinent data concerning
More informationParts Manual. RV Generator Set. HDCAA (Spec A D) HDCAB (Spec A D) English Original Instructions (Issue 9)
Parts Manual RV Generator Set HDCAA (Spec A D) HDCAB (Spec A D) English Original Instructions 0-0 9 09 (Issue 9) Introduction This parts catalog applies to the standard generator sets listed below. Parts
More informationFRONT RACK, BODY PANEL, AND HEADLIGHT ASSEMBLIES
FRONT RACK, BODY PANEL, AND HEADLIGHT ASSEMBLIES 0747-506 1 2506-107 1 Rack, Front - Assembly (inc. 2) 2 0411-576 1 Decal, Warning - Load 3 0441-592 4 Bushing 4 8410-835 4 Screw, Cap 5 0423-669 4 Spacer
More informationPARTS LIST PONY 20 SCA
PARTS LIST PONY 20 SCA WIRING DIAGRAM PART NO. PART DESCRIPTION 4990601 GEARMOTOR - 120 VOLT 4990581 GEARMOTOR - 240 VOLT 4890391 VAC MOTOR - 115 VOLT 4891251 VAC MOTOR - 240 VOLT 4991321 BRUSH MOTOR -
More informationWasher-Extractor. Parts. Cabinet Freestanding. See Page 3 for Model Numbers R001C P/N
P/N 230816 DOOR UNLOCK BUTTON PRESS & HOLD Washer-Extractor Cabinet Freestanding See Page 3 for Model Numbers Parts R001C Part No. F230557R1 April 1999 Table of Contents Title Page Parts Ordering Information...
More informationWasher-Extractor. Parts. Pocket Hardmount. Refer to Page 3 for Model Numbers. Models UW35P2 and UW35P3.
Washer-Extractor Pocket Hardmount Refer to Page 3 for Model Numbers Parts Models UW35P2 and UW35P3 Model UW35B2 PHM1403C_F232165 www.alliancelaundry.com Part No. F232165R17 December 2014 Table of Contents
More informationWasher-Extractor. Parts. Twin Tub. Refer to Page 3 for Model Numbers. UM100 UM202 UM1202 U061C_F232115
Washer-Extractor Twin Tub Refer to Page 3 for Model Numbers Parts UM100 UM202 UM1202 U061C_F232115 www.alliancelaundry.com Part No. F232115R15 December 2014 Table of Contents Title Page Parts Ordering
More information25 Horsepower Hydrostatic Zero-Turn Commercial Riding Mower
MMZ 2, 260 2 Horsepower Hydrostatic Zero-Turn Commercial Riding Mower ILLUSTRATED PARTS LIST " Float Cutter Deck - Figure 1 3 1 27 32 17 6 1 11 31 36 3 19 7 23 1 33 38 18 37 22 3 20 2 10 2 12 21 30 39
More informationATV 300 DVX CAT GREEN (A2011KSF2BUSZ) Page 1 of 56 AIR INTAKE ASSEMBLY
2011 ATV 300 DVX CAT GREEN (A2011KSF2BUSZ) Page 1 of 56 AIR INTAKE ASSEMBLY 2011 ATV 300 DVX CAT GREEN (A2011KSF2BUSZ) Page 2 of 56 AIR INTAKE ASSEMBLY Ref # Part Number Qty S/P/F Description 1 3303-705
More informationMDT5N25 & MTD5N40 SERVICE PARTS
MDTN & MTDN0 SERVICE PARTS This parts list contains the service parts and wiring diagrams for this model. Check the model number of the machine requiring the parts to be sure that this is the correct parts
More informationControl Panel Assembly Model : " Marathon 2000 (20 Gallon) - Series H
Control Panel Assembly Model :990 " Marathon 000 (0 Gallon) - Series H Page- 7 9 0 7 9 0 Number Description Qty Req. 077 NUT-FINISHED HEX #0- (ZP) 070 SWITCH ROCKER (9-) PLUG-HOLE (ZINC) / DIA 0 NUT-HEX.LOCK(KEPS)
More informationE70PL4EEC 1999 : CAMSHAFT [1/23] Page 1 of 49
E70PL4EEC 1999 : CAMSHAFT [1/23] Page 1 of 49 E70PL4EEC 1999 : CAMSHAFT [1/23] 1 5030657 1 CAMSHAFT 2 5030658 1 PLATE, Camshaft thrust 3 5030549 1 SEAL, Camshaft 4 5030989 2 BOLT, Plate 5 5030663 8 ARM,
More informationPARTS LIST FOR WLP-40-0M10 WATER RECYCLING TREATMENT SYSTEM
PARTS LIST FOR WLP-40-0M10 WATER RECYCLING TREATMENT SYSTEM Copyright 2006, Mi-T-M Corporation 1 Congratulations on the purchase of your new Mi-T-M water treatment system! This parts listing has been complied
More informationWasher-Extractor Pocket Hardmount
Washer-Extractor Pocket Hardmount UW125P4 Parts P005C_F8008201 www.alliancelaundry.com Part No. F8008201R10 June 2013 Table of Contents Title Page Parts Ordering Information... 2 Nameplate Location...
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS HBA ELECTRIC RACK OVENS ML-132361 ML-132355 HBA1E HBA2E A product of HOBART 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 43097 Rev. B (September 2014) F-43097 Rev. B (September
More informationATV 90 UTILITY CALIFORNIA GREEN (A2008KUB2BCAG) Page 1 of 58 AIR INTAKE ASSEMBLY
2008 ATV 90 UTILITY CALIFORNIA GREEN (A2008KUB2BCAG) Page 1 of 58 AIR INTAKE ASSEMBLY 2008 ATV 90 UTILITY CALIFORNIA GREEN (A2008KUB2BCAG) Page 2 of 58 AIR INTAKE ASSEMBLY Ref # Part Number Qty S/P/F Description
More informationSECTION 3. PARTS INFORMATION
SECTION 3. PARTS INFORMATION 3-1. INTRODUCTION This section lists the replaceable parts of the Henny Penny Model 591 fryer. 3-2. GENUINE PARTS Use only genuine Henny Penny parts in your fryer. Using a
More informationWasher-Extractor Pocket Hardmount
WARNING MACHINE MAY BE HOT AND CAUSE BURNS ATTEMPT NO ENTRY UNTIL BASKET HAS STOPPED SERIOUS INJURY MAY RESULT Washer-Extractor Pocket Hardmount Refer to Page 5 for Model Numbers Parts Models UW80PV and
More informationSECTION 3. PARTS INFORMATION
/592 SECTION 3. PARTS INFORMATION 3-1. INTRODUCTION This section lists the replaceable parts of the Henny Penny Model 590 fryer. 3-2. GENUINE PARTS Use only genuine Henny Penny parts in your fryer. Using
More informationPage 1 of HP B&S Vanguard Engine
1405 Page 1 of 41 14 HP B&S Vanguard Engine 1405 Page 2 of 41 14 HP B&S Vanguard Engine Ref # Part Number Qty S/P/F Description BS-28Q777-0647-E1 1 14 HP B&S Vanguard Engine 1 BS-496412 1 Cylinder Assembly
More informationHydrostatic Zero-Turn Commercial Riding Mower
Hydrostatic Zero-Turn Commercial Riding Mower Professional Turf Equipment 0" Fabricated Deck ILLUSTRATED PARTS LIST TABLE OF CONTENTS Frame Assembly.................................. 3 0" Fabricated Cutter
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS OV310G MINI RACK OVEN ML-132515 OV310G A product of BAXTER MFG. CO., INC. 19220 STATE ROUTE 162 EAST, ORTING, WA 98360 FORM 43242 Rev. D (January 2018) F-43242 Rev. D (January
More informationDVX 300 Euro. Model Number A2012KSF2BEUK SHARE OUR PASSION.
ATV 2012ATV Illustrated Parts Manual DVX 300 Euro Model Number A2012KSF2BEUK TM SHARE OUR PASSION. TABLE OF CONTENTS 2012 ATV DVX 300 Euro (Model No. A2012KSF2BEUK) BODY PANEL AND HEADLIGHT ASSEMBLY...
More informationSpare Parts List ( ) Armada BRC 40-22
Spare Parts List (1.008-060.0) Armada BRC 40-22 86409510-V 04/12/18 How to Use this Spare Parts List The PARTS LIST section contains assembled parts illustrations and corresponding parts list. The parts
More informationMODEL L-1C PARTS MANUAL
MODEL L-1C PARTS MANUAL Rev 1.00A CMA DISHMACHINES 12700 KNOTT AVENUE GARDEN GROVE, CALIFORNIA 92841 800-854- 6417 FAX 714-895- 2141 www.cmadishmachines.com TABLE OF CONTENTS MODEL CMA-L-1C 1. PARTS MANUAL...
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS MG1532 & MG2032 MIXER- GRINDERS STANDARD HOPPER (W/TOP FEED) ML-134099 ML-134103 ML-134104 MG1532 MG1532 (5HP) MG2032 OPTIONAL HOPPER (W/SIDE FEED) ML-134100 ML-134105 MG1532
More information13AU609H063 (1999) Page 1 of 25 Axle & Wheels Front And Steering Assembly
13AU609H063 (1999) Page 1 of 25 Axle & Wheels Front And Steering Assembly 13AU609H063 (1999) Page 2 of 25 Axle & Wheels Front And Steering Assembly 1 683-0304 1 S Frame 2 710-0604A 1 /P Self-tapping Screw,
More informationMDG120PHVW : 01 - CONTROL DOOR [1/21] Page 1 of 42
MDG120PHVW : 01 - CONTROL DOOR [1/21] Page 1 of 42 MDG120PHVW : 01 - CONTROL DOOR [1/21] Ref # Part Number Qty. Description 1 883316 1 CONTROL DOOR COMPLETE WHT 2 112353 1 LOGO 3 117604 1 TAPE, FOAM (SOLD
More informationMODEL NO & UP MODEL NO & UP MODEL NO & UP MODEL NO & UP
MODEL NO. -900 & UP MODEL NO. 00-900 & UP MODEL NO. 0-900 & UP MODEL NO. 0-900 & UP SKID SPRAYER FORM NO. 99-055 REV. B SET-UP AND PARTS LIST Refer to the illustrated Parts List for the details of parts
More informationPARTS MANUAL. PS314SBI Gas and Electric Ovens. Models: for domestic and standard export ovens PS314SBI Middleby Marshall, Inc.
Parts Gas & Electric (AGA[CSA]/UL) P/N 38812 Rev. B V2 1/00 Gas and Electric Ovens Models: PARTS MANUAL for domestic and standard export ovens 2000 Middleby Marshall, Inc. is a registered trademark of
More informationTANK LIDS, REAR STEP AND WHEELS
TANK LIDS, REAR STEP AND WHEELS M9060-22 Rev.4/98 FOR MODELS - KP4F, KP6F, KP6R 4/98 Item Part Number Part Description Qty. 1 9040--16--0 Tank Lid Weldment (KP4F -- Front Load) 1 9060--16--0 Tank Lid Weldment
More informationPB18-G Series Portable Pump Service Parts List
Document Number Issue Date 01/24/07 Rev. Date 7/28/16 PB18-G Series Portable Pump Service Parts List Component Pump Pump Model (Located on Serial Plate) PB18-G2015B PB18-G2015F Exploded View See Page Cross
More informationFORD - Cyl Block and Related Parts
FORD - Cyl Block and Related Parts Ref Description Qty All 302 Qty 351 Qty 351-HP 1 BLOCK ASSEMBLY 1 59-4046 1 59-4047 1 59-4047 2 PLUG - 1½ CUP - BRASS 6 59-4048 6 59-4048 6 59-4048 3 PLUG - OIL PASSAGE
More informationMDT5N25 & MTD5N40 SERVICE PARTS
This parts list contains the service parts and wiring diagrams for this model. Check the model number of the machine requiring the parts to be sure that this is the correct parts list. MDTNs & MDTN0s have
More informationWRANGLER 1708AB, 2008AB
WRANGLER 1708AB, 2008AB WIRING DIAGRAM ITEM PART NO. DESCRIPTION QTY. 1 1393251 WIRE ASSEMBLY - CIRCUIT BREAKER TO BRUSH SWITCH 1 2 1393261 WIRE ASSEMBLY - CIRCUIT BREAKER TO VACUUM SWITCH 1 3 1393271
More informationStand-On Spreader Sprayer
Illustrated Parts Manual Stand-On Spreader Sprayer CUB CADET LLC, P.O. BOX CLEVELAND, OHIO -00 Printed In USA Form No. -0 (March, 00) To The Owner Thank You Thank you for purchasing a Cub Cadet Commercial
More informationIllustrated Parts Manual. Model Number A2011ICS4BUSG (Green) A2011ICS4BOSG (Green - International)
Illustrated Parts Manual 2 1 10 650 Model Number A2011ICS4BUSG (Green) A2011ICS4BOSG (Green - International) S H A R E O U R PAS S IO N. TM TABLE OF CONTENTS 2011 ATV 650 Green (Model No. A2011ICS4BUSG)
More information