DK Hydraulic Pipe Fittings
|
|
- Kelly Davidson
- 5 years ago
- Views:
Transcription
1 DK Hydraui Pie Fiings Cass 000, 3000, 6000, 9000 fiings š a Dk ie fiings are designed and manufaured o he foowing sandards. ASME B 6.996: Forged fiings, Sokeweding and Threaded. ASME B 6.499: Ferrous Pie Pugs, Bushings, and Loknus wih Pie Threads. JIS B 3699: See sokeweding ie Fiings BS : Seifiaion for see ie fiings, srewed and sokeweding for he eroeum Indusry. Quaiy Sysem Arova R ASME Aredied Nuear & ISO900 Quaiy Sysem d ˆ@fŒššŒ Š@ˆ šœ Œ šœ Š@ œˆ@ˆ šœ Œ šœ Š@ DK Hydraui Pie Fiings dkok@dkok.om
2
3 Cass Raings ASME B6.996 seifies he yes of fiings by ass designaion and DN (NOMINAL DIAMETER) and NPS (NOMINAL PIPE SIZE) range. Tabe. Fiing Cass Raing DN(NPS) Desriion 3000 SokeWed Cass Designaion Threaded Cass Designaion deg., 90 deg. Ebows DN6DN00 ( /84) DN6DN50 ( /8) DN5DN50 ( /) DN6DN00 ( /84) DN6DN00 ( /84) DN6DN00 ( /84) Tees, Crosses Couing, HafCouing Ca Square, Hex, Round Pug Hex and Fush Bushing DN6DN00 ( /84) DN6DN00 ( /84) DN6DN00 ( /84) DN6DN50 ( /8) DN6DN50 ( /8) DN6DN00 ( /84) DN5DN50 ( /) DN5DN50 ( /) DN5DN50 ( /) DN6DN00 ( /84) ««DN6DN00 ( /84) DN6DN00 ( /84) DN6DN00 ( /84) DN6DN00 ( /84) (See Noe ()) DN6DN00 ( /84) (See Noe ()) Noe: () Pugs and bushings are no idenified by Cass Designaion. They may be used for raings u hrough Cass 6000 designaion DN6DN00 ( /84) DN6DN00 ( /84) DN6DN00 ( /84) Tabe. NPS vs., DN NPS /8 /4 / /4 / / 3 4 DN Pie OD Uni : mm ANSI JIS * NPS: Nomina Pie size used for inh dimensioned fiings * DN: Nomina diameer used for miimeer dimensioned fiings The fiing ass has reaion o Shedue No. and Wa designaion of ie for auaion of raings. See Tabe 3. Tabe 3. Cass Designaion of Fiing Tye of Fiing Threaded Threaded Threaded SokeWeding SokeWeding SokeWeding Pie Used For Raing Basis (See Noe) Shedue No Wa Designaion XS... XXS XS... XXS Noe: This abe is no inended o resri he use of ie of hinner or hiker wa wih fiings. Pie auay used may be hinner or hiker in nomina wa han ha shown in abe 3. When hinner ie is used, is srengh may govern he raing. When hiker ie is used (e.g.,for mehania srengh), he srengh of he fiing governs he raing.
4
5 Tehnia Daa Tabe 5. Fiing working ressure in differen emeraure Uni: sig Temeraure C (F) Carbon See Cass 000 Threaded Fiings F304 F36 Carbon See Cass 3000 Soke Weding & Threaded Fiings F304 F36 Carbon See Cass 6000 Soke Weding & Threaded Fiings F304 F36 37 (00) 65 (50) 93 (00) (50) 48 (300) 76 (350) 04 (400) 3 (450) 60 (500) 87 (550) 35 (600) 343 (650) 37 (700) 398 (750) 46 (800) 454 (850) 48 (900) 50 (950) 537 (000) Tabe 6. Wa Thikness of Weded and Seamess Pie Nomina Pie Size Ouside Diameer Nomina Wa Thikness Uni : mm DN NPS JIS ANSI SPP SGP Sh 5s Sh 0s Sh 0 Sh 0s Sh 0 Sh 30 Sh 40s Sh /8 /4 / /4 / / Nomina Pie Size Ouside Diameer Nomina Wa Thikness Uni : mm DN NPS JIS ANSI 6 / / / / / / Sh 60 Sh 80s XS Sh 80 Sh 00 Sh 0 Sh 40 Sh 60 XXS
6
7 Dk Hydraui Thread Fiings 90 ELBOW CL 45 ELBOW CLB PART Number No SIZE T(PT) (T) P C PART No T(PT) P C 000 b 000 b CL0R CL03R CL04R CL06R CL08R CL0R CLR CL6R /4 / /4 / CLB0R CLB03R CLB04R CLB06R CLB08R CLB0R CLBR CLB6R /4 / /4 / b 3000 b C3L0R C3L03R C3L04R C3L06R C3L08R C3L0R C3LR C3L6R /4 / /4 / C3LB0R C3LB03R C3LB04R C3LB06R C3LB08R C3LB0R C3LBR C3LB6R /4 / /4 / C6L03R C6L04R C6L06R C6L08R C6L0R C6LR C6L6R / /4 / C6LB03R C6LB04R C6LB06R C6LB08R C6LB0R C6LBR C6LB6R / /4 / A dimensions are in miimeers uness oherwise seified and ony for referene. A dimensions are subje o hange. 6
8 Dk Hydraui Thread Fiings TEE CT CROSS CX PART No T(PT) P C PART No T(PT) P C 000 b 000 b CT0R CT03R CT04R CT06R CT08R CT0R CTR CT6R /4 / /4 / CX0R CX03R CX04R CX06R CX08R CX0R CXR CX6R /4 / /4 / b 3000 b C3T0R C3T03R C3T04R C3T06R C3T08R C3T0R C3TR C3T6R /4 / /4 / C3X0R C3X03R C3X04R C3X06R C3X08R C3X0R C3XR C3X6R /4 / /4 / C6T03R C6T04R C6T06R C6T08R C6T0R C6TR C6T6R / /4 / C6X03R C6X04R C6X06R C6X08R C6X0R C6XR C6X6R / /4 / A dimensions are in miimeers uness oherwise seified and ony for referene. A dimensions are subje o hange. 7
9 Dk Hydraui Thread Fiings FULL COUPLING CFC HALF COUPLING CHC CAP CA PART No T(PT) P L PART No T(PT) P L PART No T(PT) P L 000 b 000 b 000 b CFC0R CFC03R CFC04R CFC06R CFC08R CFC0R CFCR CFC6R /4 / /4 / CHC0R CHC03R CHC04R CHC06R CHC08R CHC0R CHCR CHC6R /4 / /4 / CA0R CA03R CA04R CA06R CA08R CA0R CAR CA6R /4 / /4 / b 3000 b 3000 b C3FC0R C3FC03R C3FC04R C3FC06R C3FC08R C3FC0R C3FCR C3FC6R /4 / /4 / C3HC0R C3HC03R C3HC04R C3HC06R C3HC08R C3HC0R C3HCR C3HC6R /4 / /4 / C3P0R C3P03R C3P04R C3P06R C3P08R C3P0R C3PR C3P6R /4 / /4 / C6FC0R C6FC03R C6FC04R C6FC06R C6FC08R C6FC0R C6FCR C6FC6R /4 / /4 / C6HC0R C6HC03R C6HC04R C6HC06R C6HC08R C6HC0R C6HCR C6HC6R /4 / /4 / C6P0R C6P03R C6P04R C6P06R C6P08R C6P0R C6PR C6P6R /4 / /4 / A dimensions are in miimeers uness oherwise seified and ony for referene. A dimensions are subje o hange. 8
10 HEX HEAD PLUG CHP SQUARE HEAD PLUG CSP h h Dk Hydraui Thread Fiings Q PART No T(PT) H PART No T(PT) H C6HP0R C6HP0R C6HP03R C6HP04R C6HP06R C6HP08R C6HP0R C6HPR C6HP6R /8 /4 / /4 / C6SP0R C6SP0R C6SP03R C6SP04R C6SP06R C6SP08R C6SP0R C6SPR C6SP6R /8 /4 / /4 / ROUND HEAD PLUG CRP PART No T(PT) P L C6RP0R C6RP0R C6RP03R C6RP04R C6RP06R C6RP08R C6RP0R C6RPR C6RP6R /4 /4 / /4 / A dimensions are in miimeers uness oherwise seified and ony for referene. A dimensions are subje o hange. 9
11 Dk Hydraui Soke Wed Fiings 90 ELBOW CLSW 45 ELBOW CLBSW e e PART No SW P E PART No SW P E 3000 b 3000 b C3L0SW C3L03SW C3L04SW C3L06SW C3L08SW C3L0SW C3LSW C3L6SW /4 / /4 / C3LB0SW C3LB03SW C3LB04SW C3LB06SW C3LB08SW C3LB0SW C3LBSW C3LB6SW /4 / /4 / C6L04SW C6L06SW C6L08SW C6L0SW C6LSW C6L6SW / /4 / C6LB04SW C6LB06SW C6LB08SW C6LB0SW C6LBSW C6LB6SW / /4 / b 9000 b C9L04SW C9L06SW C9L08SW C9L0SW C9LSW C9L6SW / /4 / C9LB04SW C9LB06SW C9LB08SW C9LB0SW C9LBSW C9LB6SW / /4 / A dimensions are in miimeers uness oherwise seified and ony for referene. A dimensions are subje o hange. 0
12 Dk Hydraui Soke Wed Fiings TEE CTSW CROSS CXSW e e PART No SW P E PART No SW P E 3000 b 3000 b C3T0SW C3T03SW C3T04SW C3T06SW C3T08SW C3T0SW C3TSW C3T6SW /4 / /4 / C3X0SW C3X03SW C3X04SW C3X06SW C3X08SW C3X0SW C3XSW C3X6SW /4 / /4 / C6T04SW C6T06SW C6T08SW C6T0SW C6TSW C6T6SW / /4 / C6X04SW C6X06SW C6X08SW C6X0SW C6XSW C6X6SW / /4 / b 9000 b C9T04SW C9T06SW C9T08SW C9T0SW C9TSW C9T6SW / /4 / C9X04SW C9X06SW C9X08SW C9X0SW C9XSW C9X6SW / /4 / A dimensions are in miimeers uness oherwise seified and ony for referene. A dimensions are subje o hange.
13 Dk Hydraui Soke Wed Fiings FULL COUPLING CFCSW HALF COUPLING CHCSW i Q i R i Q i Q i Q e e PART No SW P E PART No SW P E 3000 b C3FC0SW C3FC03SW C3FC04SW C3FC06SW C3FC08SW C3FC0SW C3FCSW C3FC6SW /4 / /4 / C3HC0SW C3HC03SW C3HC04SW C3HC06SW C3HC08SW C3HC0SW C3HCSW C3HC6SW /4 / /4 / C6FC04SW C6FC06SW C6FC08SW C6FC0SW C6FCSW C6FC6SW / /4 / C6HC04SW C6HC06SW C6HC08SW C6HC0SW C6HCSW C6HC6SW / /4 / b 9000 b C9FC04SW C9FC06SW C9FC08SW C9FC0SW C9FCSW C9FC6SW / /4 / C9HC04SW C9HC06SW C9HC08SW C9HC0SW C9HCSW C9HC6SW / /4 / A dimensions are in miimeers uness oherwise seified and ony for referene. A dimensions are subje o hange.
14 Dk Hydraui Soke Wed Fiings CAP CASW BOSS CBSW TU QNV e PART No SW P L PART No SW P E 3000 b 3000 b C3P0SW C3P03SW C3P04SW C3P06SW C3P08SW C3P0SW C3PSW C3P6SW /4 / /4 / C3B0SW C3B03SW C3B04SW C3B06SW C3B08SW C3B0SW C3BSW C3B6SW /4 / /4 / C6P04SW C6P06SW C6P08SW C6P0SW C6PSW C6P6SW / /4 / C6B04SW C6B06SW C6B08SW C6B0SW C6BSW C6B6SW / /4 / b C9P04SW C9P06SW C9P08SW C9P0SW C9PSW C9P6SW / /4 / A dimensions are in miimeers uness oherwise seified and ony for referene. A dimensions are subje o hange. 3
15 DK CU Series Union THREAD UNION SOCKET WELD UNION h e h e PART No T(NPT) P E L H PART No SW P E L H 3000 b 3000 b C3U0N C3U0N C3U03N C3U04N C3U06N C3U08N C3U0N C3UN C3U6N /8 /4 / /4 / C3U0SW C3U0SW C3U03SW C3U04SW C3U06SW C3U08SW C3U0SW C3USW C3U6SW /8 /4 / /4 / PART No T(PT) P L H PART No SW P E L H C6U0R C6U03R C6U04R C6U06R C6U08R C6U0R C6UR C6U6R /4 / /4 / HEX 46 HEX 56 HEX 65 HEX 74 OCT 83 OCT 03 OCT 4 OCT C6U04SW C6U06SW C6U08SW C6U0SW C6USW C6U6SW / /4 / HEX 65 HEX 74 OCT 83 OCT 03 OCT 4 OCT THREAD UNION Oring ye SOCKET WELD UNION Oring ie PART No T(PT) P L H N Oring PART No SW P P E L N H 3000 b 3000 b C3UO0R / HEX.0 P8 C3UO0SW / C3UO03R HEX 6.0 P0 C3UO03SW C3UO04R C3UO06R / HEX 54 HEX G5 G30 C3UO04SW C3UO06SW / C3UO08R OCT 46.0 G35 C3UO08SW C3UO0R C3UOR /4 / OCT 80 OCT G45 G50 C3UO0SW C3UOSW /4 / C3UO6R OCT 77.0 G65 C3UO6SW HEX 4 HEX 46 HEX 54 HEX 63 HEX 77 HEX 80 OCT 95 OCT Oring P8 P0 G5 G30 G35 G45 G50 G65 A dimensions are in miimeers uness oherwise seified and ony for referene. A dimensions are subje o hange. 4
16 DK Hydraui Pie Fiings SWAGED NIPPLE TBE PBE PLE/TSE BLE/TSE BLE/PSE TLE/PSE Large End Size Sma End Size Lengh (mm) / /4 / /8 / /8 /8 /8 /4 /8 / / Swaged Nies are made ou of forging or ie. TBE : Threaded Boh End PBE : Pain Boh End PLE / TSE : Pain Large End Threaded Sma End BLE / TSE : Beveed Large End Threaded Sma End BLE / PSE : Beveed Large End Pain Sma End TLE / PSE : Threaded Large End Pain Sma End A dimensions are in miimeers uness oherwise seified and ony for referene. A dimensions are subje o hange. 5
17 DK Hydraui Pie Fiings DK "CP" series HYDRAULIC CONDENSATE POT CP series Condensae Po Par Lising 4 PIPE CAP 3 HALF COUPLING (CHC) 4 VENT PLUG (CVP) 5 HEX HEAD PLUG (CHP) 6 SOCKET WELDING HALF COUPLING (CHCSW) Tabe of Dimensions Uni: mm /" SW 6 3 WELDING WELDING /" SW 30 D PIPE 3" 4" D L L* 0 9 L 50 * L engh is adjusabe aording o ien reques o fi he sysem design. 30 L.0 /" THREAD L L 5.0 L Mode Shown: CP464AWWPVS Ordering Informaion An exame of ordering number: CP 4 6 4A WWPV S DK CP series ondensae o ordering No.: CP Condensae Po Designaor Pie Size IDENTIFIER 3" 3 4" 4 Raing Designaor Pie Wa IDENTIFIER SCH40 4 SCH 80 8 SCH 60 6 SCH XXS X POT CONFIGURATION DESIGNATOR Configuraion IDENTIFIER A B POT END CONNECTION DESIGNATOR MATERIAL DESIGNATOR 4 3 3A 3B 3C 4A End onneors are desribed by firs he run ( and ) and nex he branh (3 and 4). 4 3 End Conneion /" NPT /" PT /" SW /" DKLOK Ven Pug Hex Head Pug Noe: End onneion fiings are seeed as er he ie wa raing. IDENT FIER N R W D V P MATERIAL ASTM A3TP304 ASTM A3TP304L ASTM A3TP36 ASTM A3TP36L ASTM A335P ASTM A335P ASTM A06B IDENTIFIER 4 4L S L C C C6B A dimensions are in miimeers uness oherwise seified and ony for referene. A dimensions are subje o hange. 6
18
DK-LOK Hydraulic Pipe Fittings
Class 2000, 3000, 6000, 9000 fittings Catalog No. C-2 June 2012 DK-LOK Hydraulic Pipe Fittings are designed and manufactured to the following standards. ASME B 16.11-2005: Forged fittings, Socket-welding
More informationForged steel socket Welding fittings 6 ~ 13. Forged steel threaded fittings 14 ~ 20. Forged steel outlet fittings 21 ~ 23
Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications 24 ~ 25 Comparison of astm specifications and similar
More informationForged steel socket Welding fittings 6 ~ 13. Forged steel threaded fittings 14 ~ 20. Forged steel outlet fittings 21 ~ 23
Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications 24 ~ 25 Comparison of astm specifications and similar
More informationForged Fittings. High Technology Valve & Fitting Series
Forged Fittings High Technology Valve & Fitting Series Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications
More informationTotaiyo Steel Industry トタイヨ 鉄鋼業界. Manufacturers of Pipe Fittings
Y IS R QUALIT AS O D 'S RE G TE L LY S U RA NC E ISO Totaiyo Steel Industry トタイヨ 鉄鋼業界 Manufacturers of Pipe Fittings 900 PROFILE The Company TOTAIYO is the brand name of the flange, fittings manufacturing
More informationYl)HAl STrrl (INDIA) Forged High Pressure Pipe Fittings. All ISO 9001:2003/ ISO 14001:2004 / 8S Ol!SAS 18001:2007 / PED Al'PROl'ED 97/23/EC
Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Summary : Summary : Type 1. Elbow, Tee, Cross, Couplin g, Half Coupling, Cap, Plug, Bushing, Union, HEX. Nipple, Swage 2. nipple, Bull
More informationForged High Pressure Pipe Fittings
Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Pressure Class Socket Weld Forged Fittings Products Dimension Specifications Pressure Class Threaded Forged Fittings Products Dimension
More informationSection 7. Socket Weld and Threaded Fittings. Socket Weld and Threaded Fittings 7-1
Section 7 Socket Weld and Threaded Fittings This Section contains dimension and tolerance information extracted from American and British specifications applicable to socket weld and threaded fittings.
More informationMGF Thread Milling Tools
MGF Thread Milling Tools Chamfering and hread milling righ from M2 Spiral flued solid carbide ools wih profile correcion and rear chamfer. Diameer range 2-20 mm This offers he following main advanages
More informationPiping Material Specification - Piping class : CS101
Piping Material Specification - Piping class : CS101 SERVICE PROCESS (NG) BASIC MATERIAL CARBON STEEL RATING CLASS 150#, ASME B 16.5 DESIGN CODE ASME B 31.3 DESIGN TEMPERATURE NOMINAL CORROSION ALLOWANCE
More informationFull Traceability. Material Specification. Raw Material Code. Heat Treatment
All J.B. Smith swages, bull plugs, tubing and casing nipples, and chambers are traceable to the original mill test report. To ensure traceability, all fittings are steel stamped as follows: Material Specification
More informationForged Fittings Socket Weld And Threaded
Frged Fittings Scket Weld And Threaded Types Equal tee / Reducing Tee / Full Cupling / Half Cupling / Street Elbw / Bull Plug / Bss / Unin (Male/Female) / 90 Elbw / 5 Elbw / Equal Crss / Reducing crss
More informationContents FORGED FITTINGS. Photos 1. Elbow Tee Cross 2. Cap Coupling Lateral 3. Reducer Inserts MSS Unions & Unions HG21634 MSS SP-83 5
JNFIT INDUSTRIES LIMITED Add: Jiangyin, Jiangsu Province, Yingkou, Liaoning Province, P.R. China Website:www.oilgasolution.com Email:sales@oilgasolution.com Contents FORGED FITTINGS Page Photos 1 Socket
More informationflowconme Types of Fittings Available Wall Thickness Sch 5 - Sch 160 (Sch 5s - Sch 160s) Others available upon special request
FITTINGS Overview Types of Fittings Available 45, 9 Elbows, 18 Returns (Short & Long Radius) Tees & Crosses (equal & reducing), Reducers (concentric & eccentric), Caps, Stud Ends, Weldolets, Outlets, Laterals
More informationDRAWING INDEX 1 07/01/2013. Company Project Project Number Location Revision Date
DRAWING INDEX Company Project Project Number Location Revision Date LEGACY OIL & GAS INC. PIERSON PILINE TO EOG 12069 VARIOUS LSD ISSUED FOR APPROVAL January 4, 2013 Drawing No. Client No. Description
More informationJIS G (SGP)
JIS G 3452-1988 (SGP) Nominal size Outside Diameter Thickness Unit Weight (plain end) A B mm in mm in lb/ft kg/m 6 1/8 10.5 0.413 2.0 0.079 0.282 0.419 8 1/4 13.8 0.543 2.3 0.090 0.438 0.652 10 3/8 17.3
More informationForged Fitting.
Carbon Steel Stainless Steel www.ludahk.com Company Information Introduction Having been involving in manufacturing for 4 generations, Luda's Family witnessed the dramatic changes in China. Starting with
More information611, 671. Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic bonnet and an integral optical position indicator as standard. Features
More informationMANUFACTURING SPECIFICATION
Swage Nipples, Bull Plugs & Oil Country Fittings Catalogue SWAGE NIPPLES, BULL PLUGS, OIL COUNTRY FITTINGS, COUPLINGS, LOW TEMP & STAINLESS SWAGES MANUFACTURING SPECIFICATION CSP Products Ltd, manufactures
More informationThread Milling Tool GWF
Thread Milling Tool GWF Thread milling >Ø20 mm Spiral flued solid carbide ools, some wih face cuer and fron chamfer This offers he following main advanages compared o he convenional mehods of apping and
More informationTable Of Contents. Assembly Instructions. Identification of Sync-Lok Tube Fittings. Reducing Port Connector 36. Male Elbow 11
able Of Contents eneral Information 1 Union Cross 27 Ordering Information 3 Reducer 28 ube Selection Data 5 Bulkhead Reducer 29 Male Connector 7 Male Adapter 31 Male Bore hrough Connector 9 emale Adapter
More information611, 671. Diaphragm Valve, Metal
Distributed by: Tel: 905.677.9000 Toll Free: 1.0.486.7863 www.tricanada.com Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic
More informationKing Lai Hygienic Materials Co., Ltd. CDA/ Bulk Gas / UHP Gas Delivery System
King Lai Hygienic Materials Co., Ltd. CDA/ Bulk Gas / UHP Gas Delivery System Introduction 1 King Lai Standard and Specifications 2 Cleaning & Packaging Process Tube & Pipe 34 56 TUBE PIPE ASTM PIPE JIS
More informationCopper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10)
Offshore OSNA -10 Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10) KME Germany GmbH & Co. KG Offshore OSNA -10 [GB] Content KME - The Company 1 The Material 2 Offshore Product Range 3 Pipes
More informationLATEST PRICE LISTS PIPES & TUBES FITTINGS VALVES CONTACT DETAILS: AUTHORISED DISTRIBUTORS of: JINDAL PIPES LTD. MAHARASHTRA SEAMLESS LTD.
LATEST PRICE LISTS 2017 PIPES & TUBES AUTHORISED DISTRIBUTORS of: JINDAL PIPES LTD. MAHARASHTRA SEAMLESS LTD. SANT INDUSTRIAL VALVES FITTINGS VS FORGED FITTINGS C BRAND ISI APPROVED G.I. FITTINGS VALVES
More informationForged Steel Fittings CLASS 3000 THREADED
Forged Steel Fittings CLASS 3000 THREADED NPS 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 DN 6 8 10 15 20 25 32 40 50 65 80 100 90 0 ELBOWS A in 0.97* 0.97 1.12 1.31 1.50 1.75 2.00 2.38 2.50 3.25 3.75
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Normally Closed, Normally
More informationAngle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a plastic pneumatic piston actuator. The valve spindle is sealed by a self-adjusting gland packing or a compact
More informationAngle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ manually operated 2/2-way angle seat globe valve has an ergonomically designed plastic handwheel. The valve spindle is sealed by a self-adjusting gland
More informationCHECK VALVE P.147 SWING CHECK VALVE P.149 WAFER CHECK VALVE P.151 BALL CHECK VALVE P.153 TRUE UNION BALL CHECK VALVE P.155 BALL FOOT VALVE
CHECK VAVE P.147 P.149 P.151 P.153 P.155 SWING CHECK VAVE WAFER CHECK VAVE BA CHECK VAVE TRUE UNION BA CHECK VAVE BA FOOT VAVE 145 PERFORMANCE OF SWING CHECK VAVE, BA CHECK VAVE, AND BA FOOT VAVE Min.
More informationLATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
More informationIndex. General Information 5-6. Technical Information. 1-pole terminal boards. 2-pole terminal boards. 3-pole terminal boards. 4-pole terminal boards
Terminal Blocks Index Page General Informaion Technical Informaion pole erminal boards pole erminal boards 3pole erminal boards pole erminal boards pole erminal boards ype KL...K ype K M (acc. o DIN )
More informationCopper & Copper Nickel. Pipes Fittings Flanges.
Copper & Copper Nickel Pipes Fittings Flanges BOMYUNG METAL.Co.,Ltd CONTENTS 01 COPPER PIPES COPPER PIPES CHEMICAL COMPOSITION / MECHANICAL PROPERTIES / WELDING INSTRUCTION / PIPE / COIL COPPER FITTINGS
More informationSEAMLESS & WELDED PIPE
SEAMLESS & WELDED PIPE SPECIFICATIONS: LENGTHS: ASTM A312M-08 6.1 METRE/RANDOMS FINISH: WELDED ANNEALED & PICKLED SEAMLESS COLD FINISH/HOT FINISH NB PIPE SIZE SIZE WELDED SEAMLESS APPROX. WGT Inch mm O.D.
More informationSection 2. Shurjoint Grooved Fittings Flow Data / Friction Resistance Ductile Iron Grooved Fittings. Wrought Grooved Fittings
Section 2 Cast & Wrought Grooved Fittings Shurjoint Grooved Fittings... 56 Flow Data / Friction Resistance... 56 Ductile Iron Grooved Fittings 7110 / 7111 / 7112 / 7113 Elbows... 57 7120 / 7135 / 7130
More informationFLANGES & GASKETS. ITEM No. QTY. DESCRIPTION SIZE MATERIAL MASS (kg) 1 1 FLANGE RFWN - DN # Sch 80 DN100mm 300# Sch 80 A
FLANGES & GASKETS Most of the flanges have intelligent custom properties built into their design tables (making extensive use of the concatenate function) to populate your Bills of Materials (example below).
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance actuator. Normally Closed, Normally Open and Double Acting control functions are available.
More informationWIRE ROPE SLINGS made to any Specifications Required
WIR ROP SINGS made o any Specificaions Required Specify diameer and give sizes required as shown by he leers -- 1 2 3 4 5 Slings made up in Afgrip Aluminium Swage and Superloop Seel Swage Sandard ye Sizes
More informationFasani Pressure Seal Cast Gate Valves - Style A Wedge Gate and Parallel Slide
A series of robust gate valves specifically designed for applications in the power industry Features General application Our pressure seal -Style A gate valves are recommended for several applications
More informationInte rated. Piping. Manufacturer & Exporter: A Government of India Recognized Star Export House PIPES TUBES ROUND BAR PLATES SHEETS
ISO 9001-08 ISO 14001-04 OHSAS 18001-07 PE-97/23/EC Certified Company RINA M A R I N E Approved Manufacture PIPES UBES ROUN BAR PLAES SHEES Inte rated Manufacturer & Exporter: A WORL OF FERROUS & NON -
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ piston actuated 2/2-way diaphragm valve is designed for use in sterile areas of application. All metallic actuator components are made of stainless steel. The
More informationPipe Fittings. We deliver confidence through quality products
We deliver confidence through quality products INTRODUCTION I ITTINGS SD's recision pipe fittings are designed and manufactured to very stringent tolerances under rigid quality control procedures, to provide
More informationHVAC. Products. TRI A FLO Automatic Cartridges PAGE 2. TRI Y FLO Strainer PAGE 3. TRI U FLO Accessory Union PAGE 4. CB Series Butterfly/Venturi PAGE 5
HVAC TRI A FLO Automatic Cartridges TRI Y FLO Strainer TRI U FLO Accessory Union Products Automatic balancing valves.5 thru 108.0 in Brass, Stainless, PVC, CPVC, Titanium, Ceramic, Monel, and more PAGE
More informationHAM-LET PRECISION INSTRUMENT PIPE FITTINGS
HAM-E PRECISION INSRUMEN PIPE FIINGS PRECISION INSRUMENAION PIPE FIINGS GENERA HAM-E Group is pleased to introduce its line of Precision Instrument Pipe Fittings. he Pipeline range of connectors is manufactured
More informationPRODUCTS & SERVICE ITEMS CARBON, STEEL, STAINLESS, STEEL, ALLOY STEEL, TITANIUM ALLOY. NICKEL ALLOY WELDING, SEAMLESS FITTINGS.
1/44 INTRODUCTION COMPANY NAME CHU TEI FU PIPING FITTING MATERIAL CO., LTD. TING CHENG HSING ENTERPRISE CO., LTD. ADDRESS NO.40-1, HOUZHUANG LN., RENWU DIST., KAOHSIUNG CITY 814, TAIWAN TELEPHONE - TEL
More informationHSS Hollow. Structural Sections DIMENSIONS AND SECTION PROPERTIES HSS: TECHNICAL BROCHURE
HSS Hollow Srucural Secions DIMENSIONS AND SETION PROPERTIES HSS: TEHNIAL BROHURE 01 Seel Tube Insiue 516 Waukegan Road, Suie 17 Glenview, IL 6005 TEL: 87.61.1701 FA: 87.660.7981 HSS Manufacuring Mehods
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ motorized metal diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a reduction gear and cam. The
More informationCARBON STEEL PIPE - BUTTWELD
010-1 CARBON STEEL PIPE - BUTTWELD WEIGHT BLACK GALVANIZED FUSION BOND SIZE LBS/FT T & C P.E. T & C P.E. 1/8" 0.24 8.00 6.09 16.40 14.28 1/4" 0.42 9.61 8.25 15.27 12.91 3/8" 0.57 10.98 9.52 16.91 14.39
More informationUltra Proline. ECTFE (Halar ) Single Wall Piping System
ECTFE ( ) Single Wall Piping System 222 - Specification Natural Ethylene Chlorotrifluoroethylene (ECTFE) Chemical Piping System REV:IN0512HA Materials: ASTM D3275 Class 2 resin. Raw resins are certified
More informationTel: / Fax:
Tel: +9/97 Fax: +9 http://www.klsteel.com Email: metalsintl@klsteel.com Contents. Company Profile. Organization Chart. Quality Certificate. Process Flowchart 5. Production Equipment. Inspection & Testing
More informationINSTRUMENTATION. Tube Fittings. Catalog Number 01-5 November,
INSTRUMNTATION Tube Fittings Catalog Number 0-5 November, 009 www.dklok.com Index Union U Tube to Tube Union Thermocouple Connector MCT Tube to Female Pipe Female Connector CF-N 9,40 Union lbow Union Tee
More informationPIP PN01CS2S01 Piping Material Specification 1CS2S01 Class 150, Carbon Steel, Socket Weld, 0.125" C.A., Process
May 2016 Piping PIP PN01CS2S01 Piping Material Specification 1CS2S01 Class 150, Carbon Steel, Socket Weld, 0.125" C.A., Process PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the
More informationSeries 240 Type 3349/3379 Pneumatic Control Valve Type 3349 Aseptic Angle Valve
Series 240 Type 3349/3379 Pneumatic Control Valve Type 3349 Aseptic Angle Valve With USP-VI diaphragm Application Control valve for aseptic applications in the food and pharmaceutical industries DIN or
More information3-PIECE TUBE ASSEMBLY
3-PIECE TUBE ASSEMBY STAINESS STEE HIGH PRESSURE 37 TUBE FITTINGS 1/8 TO 2 MEETS SAE STANDARD J514 If necessary, see SAE Standard J514 for a complete list of dimensions. NPT Tapered Pipe Threads meet the
More informationForged steel Fig. 640/641 (Y) Page 6
Thermodynamic steam trap CONA TD ANSI Thermodynamic steam trap Thermodynamic steam trap ANSI150 / - with flanges (Fig. 640/641...1) - with screwed sockets (Fig. 640/641...2) - with socket weld ends (Fig.
More informationExploded view 3 piece ball valves Series R
Exploded view 3 piece ball valves Series R Ball valve of series R with reduced bore (standard version) DN10 to DN65 Example shown: Series R DN65 Please follow assembly and maintenance instructions carefully.
More informationProduct Catalog. Rev. 612 r1
Product Catalog Rev. 612 r1 PIPE FITTINGS CONDUIT FITTINGS PRODUCT CATALOG Pipe Nipples Welded and Seamless Carbon Steel 2 Pipe Nipples Welded and Seamless Stainless Steel 3 Pipe Nipples End Finishes 4
More informationAngle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a robust low maintenance aluminium actuator. The valve spindle is sealed by a self-adjusting gland packing providing
More informationThread Milling. Tool Systems.
www.mimaic.de 2017 The affordable sysem wih high performance allows hreading and / or circlip grooving in high precision. The polygonal connecion of inser and milling body improves he efficiency and precision
More informationInstrumentation Pipe & Weld Fittings. No.03-9 August 2017
Instrumentation ipe & Weld Fittings No.03-9 August 2017 Instrumentation ipe & Weld Fittings Technical Information Thread Fittings Close Nipple GNC 04 ipe lug G 07 Tee GT 10 ex Nipple GN ex Reducing Nipple
More informationCutting and Turning Tools
Cuing and Turning Toos Our Company Specia Cuing Toos Circuar- and Thread Miing Toos Cuing and Turning Toos Driven Toohoders for CNC Machining Ceners Driven Toohoders for CNC Turning Machines Mui-Spinde
More informationCONA ANSI Further components / Accessories
CONA ANSI Further components / Accessories Liquid drainer ANSI150 / 300 - with flanges (Fig. 665...1) - with screwed sockets (Fig. 665...2) - with socket weld ends (Fig. 665...3) - with butt weld ends
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The 601, and manually operated diaphragm valves have a temperature resistant plastic handwheel, 602 has a stainless steel handwheel. Bonnet and internals are made all
More informationCopper-Nickel Seawater Piping Systems Offshore product range: Pipes, fittings and flanges of OSNA 10
Copper-Nickel Seawater Piping Systems Offshore product range: Pipes, fittings and flanges of OSNA 10 KME Germany AG & Co. KG OSNA 10 [GB] Member of the KME Group Contents Your Partner KME The Material
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled by inert gases. Normally Closed, Normally Open and Double Acting control
More informationFAR51. Insertion adapter with venting element Universal insertion adapter for existing flange nozzles, suitable for high temperature applications
f ti r : FAR51 Insertion adapter with venting element Universal insertion adapter for existing flange nozzles, suitable for high temperature applications Application Process adapter for the microwave barriers
More informationXSz 8... XSz 50 Solenoid actuated fail-safe safety valve
> > /-way or size: G /4... G, /4... NT > > ouble valve conrol sysem, inherenly failsafe wihou residual pressure > > ynamic self monioring > > For use wih pneumaic cluch and brake sysems and oher -way safey
More informationYARWAY FLOAT TRAPS SERIES 23000, 26000, 33000
SERIES 23000, 26000, 33000 Series 23000 and 26000 for steam-using equipment, supporting high-volume drain discharge. Series 33000 for air and gas, achieving energy conservation through rapid drain discharge.
More informationFlow Monitor FS10. Description FS10-.. Connection diagram FS10. Ordering information. Electrical connection. Flow rate ranges
Flow Monior FS0 Descripion Compac single poin flow monior, MIN or MAX monioring opions, suiable for waer, oil, air or media wih similar hermal conduciviies. Wih screw-in or plug-in ype monioring head for
More informationORIFICE PLATE flow meters
ORIFICE PLATE flow meters 1 Differential pressure and pressure loss When a throttle element is interposed in a closed passage of fluid in piping, a difference is produced between the pressure upstream
More informationBR 26d Ball valve. Stainless Steel. Application: Versions: Special versions:
Application: Stainless Steel BR 26d Ball valve Tight-closing Ball valve made of stainless steel for corrosive media, especially to meet high process requirements in chemical plants: Nominal sizes DN 15
More informationVCR Metal Gasket Face Seal Fittings
VR Metal Gasket ace Seal ittings 1/8 to 1 and 6 to 18 mm sizes high-purity stainless steels www.swagelok.com VR Metal Gasket ace Seal ittings Index General Information Glands ages 4, 5, 6 odies ages 6,
More informationDiaphragm Valve, Metal
Distributed by: Tel: 905.677.9000 Toll Free: 1.800.486.7863 www.tricanada.com Diaphragm Valve, Metal Construction The GEMÜ 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled
More informationANSI version. The valve closes when the differential pressure rises
Self-operated Regulators Series 42 Differential Pressure Regulator with Type 2424/Type 2428 Actuator and Type 2422 Valve Type 42-24 A Type 42-24 B Type 42-28 A Type 42-28 B ANSI version Application For
More informationPipe Fittings. HP Series
Pipe Fittings HP Series Contents Pipe Plug Hollow Hex Plug Close Nipple Special Pipe Nipple Hex Nipple Hex Long Nipple Reducing ushing Pipe Cap Hex Coupling Union all Joints Adaper Male lbow Street lbow
More informationFloating Ball Valve - Design Features
408 imbledon Rd. / Edmond, OK 73003 / Phone: 405-509-2665 / Fax: 866-239-1587 / www.mako-products.net Flanged Ball Valves Floating Ball Valve - Design Features Mounting and Stem Seal Design Actuator Mounting
More informationFlow Monitor FS10. Description FS10-.. Connection diagram FS10. Ordering information. Electrical connection. Flow rate ranges FS 10
Flow Monior FS0 Descripion Compac single poin flow monior, MIN or MAX monioring opions, suiable for waer, oil, air or media wih similar hermal conduciviies. Wih screw-in or plug-in ype monioring head for
More informationAdvanced PE Single Wall Piping System
Advanced PE Single Wall Piping System 8 - Specification Black Polyethylene (Advanced PE) Piping System REV:IN0512PE Materials: Pipe Production: ASTM D3350 cell classification PE445584C. Resin shall comply
More informationK-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
A comprehensive range of ball valves to suit a wide variety of industrial applications FEAURES he range includes one, two and three piece ball valve designs with screwed, weld or flanged end connections.
More information:,Rhino SD/XD G/D 24 Vdc ISO
:,Rhino SD/XDG/D Vdc ISO ()Rhino SD/XD() SD/XD Rhino SD/XDG/D Vdc ISO Rhino SD/XD, Rhino SD/Xd, (Rhino SD/XD) 006 Nordson Corporation P/N 75606A-0 Rhino SD/XDG/D Vdc ISO 0 9 5 8 7 6 P/N 75606A-0 006 Nordson
More informationOsakue. a) Seamless b) Rolled c) Spiral-welded. Fig. 1: Pipe manufacturing methods
Piping Lines and Fittings Introduction Fluids are transported under pressure through hollow materials called lines. The common three types of fluid lines are pipes, tubes, and hoses. These lines must provide
More information3000 lb Socket Weld Fittings - ANSI B16.11/BS 3799
Weld and Threaded Fittings 3000 lb Weld Fittings - ANSI B6./BS 3799 /8 /4 3 /8 / 3 /4 /4 / / 3 4 Centre to Bottom of 45 Tees, & Elbows Bore Diameter Bore Diameter of Fittings Thickness s - Average socket
More information- Seamless pipe, Welded steel pipe - Standard: ASME/JIS/DIN.
CARBON STEEL PIPES STAINLESS STEEL PIPES - Seamless pipe, Welded pipe (ERW), Spiral welded pipe. - Seamless pipe, Welded steel pipe - Standard: ASME/JIS/DIN. - Standard: ASME/JIS - Material: ASTM A53/A106
More informationSection 2. Pipe, Valves and Fittings Sizes ¼" to 12" Schedule 80 CPVC Piping System. Serviced by GF Little Rock
Section 2 Schedule 80 CPVC Piping System Pipe, Valves and Fittings Sizes ¼" to 12" Serviced by GF Little Rock Effective March 27, 2006 Glossary Std. Pack = Standard Carton Quantity FP = Female Pipe hread
More informationSTERI-TROL Clean Service 'S' series Two-port and Three-port Control Valves - DN15 (½") to DN100 (4")
Page 1 of 17 Cert. No. LRQ 09608 ISO 9001 STERI-TROL Clean Service 'S' series Two-port and Three-port Control Valves - DN15 (½") to DN100 (4") TI-P183-02 CH Issue 3 Description STERI-TROL 'S' series are
More informationIndustrial Range. Why Neumo...?
Why Neumo...? NEUMO opens the door to 1800 tonnes of Stainless Steel products. Our comprehensive stock range is carefully chosen to ensure NEUMO UK Ltd. can be your complete Stainless Steel logistics partner,
More informationMaterials : Forged carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( NPS 1/2" to 8" ) Flanges R.F. Class 300 (PN50) - 28 C + 200 C Max Pressure : 50 Bars Specifications : With ISO 5211 mounting pad Fire
More informationAWH ARMATUREN- WERK HALLE GMBH. Thermodynamic steam trap. Thermodynamic steam trap. Thermodynamic steam trap PN40. Thermodynamic steam trap PN63
TD PN40 - with flanges (Fig. 640/641...1) - with screwed sockets (Fig. 640/641...2) - with socket weld ends (Fig. 640/641...3) - with butt weld ends (Fig. 640/641...4) Forged steel High temperature steel
More informationR690. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ diaphragm valve has a low maintenance membrane actuator which can be controlled by air or inert gases. Normally Closed (NC), Normally Open (NO) and Double
More informationACCESSORIES AND DIAPHRAGM SEAL
ACCESSORIES AND DIAPHRAGM SEAL TA102 TA201 TA202 TA203 TD101 TD103 TD104 TD202 Data sheet H20022a 05/2017 TD301 TD302 TD303 Trafag Italia Srl Via Cremona 1 20025 Legnano (Mi) Tel. +39 0331 59 23 97 Fax
More informationHole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole
Mechanical Tees Hole-cutting Shurjoint mechanical tees provide a fast and easy mid-point branch outlet, eliminating the need for welding or the use of multiple fittings. The Model M21 features a female
More informationSection 14. Gate Valves
Section 14 Gate Valves 221 A-Gate Brass Gate Valve S Brass Brass Brass Brass and Wheel Ductile Iron Threading ISO 228 Thread BSP 180 C 16 bar General Purpose Brass Gate Valve AGVFF/015 15 43 85 50 0.24
More informationAngle Seat Globe Control Valve, Metal
Angle Seat Globe Control Valve, Metal Construction The GEMÜ 2/2-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 1434 µpos, GEMÜ 1435
More informationRAIMONDI. High pressure forged check valves recommended to prevent flow reversal in severe applications.
Fig. 6042 6045 RAIMONDI High pressure forged check valves recommended to prevent flow reversal in severe applications. Features High quality forged materials to guarantee pressure envelope integrity, all
More informationR677. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction All medium wetted parts, the bonnet and handwheel of the GEMÜ 2/2-way diaphragm valve are made of plastic. The low maintenance plastic bonnet has an ergonomically
More informationProduct warranty. Quality Policy. The Goal
About the Company SEALEXCEL (INDIA) PVT. LTD. is a fast growing manufacturing company in the field of design, development, production and marketing of high quality valves and fittings for international
More informationBS up.v.c PRESSURE PIPE FITTINGS
BS Equal Elbow 90 Faucet Elbow 90 Equal Tee Reducing Tee To solvent weld to pipes at both end. L A B Dia. d (Gram) ½ 1 5mm 16.5 17.4 16.5 21.50mm 20 ¾ 2 0mm 19.5 19.6 18.8 26.90mm 45 1 25m m 25.5 21.9
More informationPIPES, PIPE FITTINGS VALVES & FLANGES
PIPES, PIPE FITTINGS VALVES & FLANGES 2 About the Company Atlas Commercial Company (Kwt.) W.L.L was established in 1962, and is part of the Boodai group of companies. Atlas is one of the oldest companies
More informationVogt Valves Catalog and Application Manual VVENCT
Vogt Valves Catalog and Application Manual VVENCT0000-06 Experience In In Motion Motion Vogt Valves, Sulphur Springs, TX Vogt Valves A History in the Making In the late 1890s, Vogt pioneered the early
More informationGROOVING INSERTS. Thread Turning Index. Back to Main Index
Grooving > Insers GOOVING INSETS Thread Turning Index Back o Main Index VADEX Ordering Code Sysem...Page 149 Exernal - DIN 471 eaining ing Grooves for Shafs...Page 150 Inernal - DIN 472 eaining ing Grooves
More information