CHECK VALVE P.147 SWING CHECK VALVE P.149 WAFER CHECK VALVE P.151 BALL CHECK VALVE P.153 TRUE UNION BALL CHECK VALVE P.155 BALL FOOT VALVE

Size: px
Start display at page:

Download "CHECK VALVE P.147 SWING CHECK VALVE P.149 WAFER CHECK VALVE P.151 BALL CHECK VALVE P.153 TRUE UNION BALL CHECK VALVE P.155 BALL FOOT VALVE"

Transcription

1 CHECK VAVE P.147 P.149 P.151 P.153 P.155 SWING CHECK VAVE WAFER CHECK VAVE BA CHECK VAVE TRUE UNION BA CHECK VAVE BA FOOT VAVE 145

2 PERFORMANCE OF SWING CHECK VAVE, BA CHECK VAVE, AND BA FOOT VAVE Min. pressure Uni: kpa {gf/m 2 }, normal emperaure mm inch 15 1/2 20 3/ / / SWING CHECK VAVE BA CHECK VAVE, BA FOOT VAVE VERTICA PIPING HORIZONTA PIPING VERTICA PIPING HORIZONTA PIPING WHEN FUY SEAED WHEN AIR PASSES WHEN FUY SEAED WHEN AIR PASSES WHEN FUY SEAED WHEN AIR PASSES WHEN FUY SEAED WHEN AIR PASSES EPDM 20{200} 10{100} 20{200} 10{100} 20{200} 5{50} 20{200} 1{10} PTFE 30{300} 10{100} 30{300} 10{100} EPDM 20{200} 10{100} 20{200} 10{100} 30{300} 5{50} 30{300} 1{10} PTFE 35{350} 10{100} 35{350} 10{100} EPDM 30{300} 10{100} 35{350} 10{100} 30{300} 5{50} 30{300} 1{10} PTFE 50{500} 10{100} 60{600} 10{100} EPDM 30{300} 10{100} 35{350} 10{100} 30{300} 10{100} 30{300} 2{20} PTFE 50{500} 10{100} 60{600} 10{100} EPDM 30{300} 10{100} 35{350} 10{100} 30{300} 10{100} 30{300} 2{20} PTFE 50{500} 10{100} 60{600} 10{100} EPDM 30{300} 10{100} 35{350} 10{100} PTFE 50{500} 10{100} 60{600} 10{100} EPDM 35{350} 10{100} 40{400} 10{100} 20{200} 10{100} 20{200} 2{20} PTFE 55{550} 10{100} 60{600} 10{100} EPDM 35{350} 10{100} 40{400} 10{100} 20{200} 10{100} 20{200} 2{20} PTFE 60{600} 10{100} 65{650} 10{100} EPDM 35{350} 10{100} 40{400} 10{100} PTFE 60{600} 10{100} 65{650} 10{100} EPDM 40{400} 15{150} 45{450} 10{100} PTFE 65{650} 15{150} 70{700} 10{100} EPDM 40{400} 20{200} 45{450} 15{150} PTFE 70{700} 20{200} 70{700} 15{150} TEST METHOD [Verical piping] [Horizonal piping] Measure he minimum pressure required for air o pass hrough or o be sealed. PERFORMANCE OF WAFER CHECK VAVE Min. sealing pressure / operaing pressure (waer pressure) Uni: kpa {gf/m 2 } {PSI} STANDARD MODE SPRING MODE VERTICA PIPING HORIZONTA PIPING VERTICA PIPING HORIZONTA PIPING mm inch MIN. SEAING PRESSURE OPERATING PRESSURE MIN. SEAING PRESSURE OPERATING PRESSURE MIN. SEAING PRESSURE OPERATING PRESSURE MIN. SEAING PRESSURE OPERATING PRESSURE {210.0}{3.0} {70.0}{1.0} {7.0}{0.1}{210.0}{3.0}{0.7}{0.01}{210.0}{3.0} {14.0}{0.2}{210.0}{3.0} {0.7}{0.01} {7.0}{0.1} {70.0}{1.0}{0.7}{0.01} {70.0}{1.0} {14.0}{0.2} {70.0}{1.0} {0.7}{0.01} TEST METHOD [Verical piping] [Horizonal piping] Fluid flow Arrow Fluid flow 146

3 CHECK VAVE / SWING CHECK VAVE SWING CHECK VAVE PREVENTS FUID BACKFOW AND PROTECTS PUMP FACIITIES ARM-TYPE CHECK VAVE PREVENTS FUID RESISTANCE INCREASE. A-PASTIC MATERIA PROVIDES HIGH RESISTANCE TO CORROSIVE FUID INCUDING ACID AND AKAI. INTERNA MAINTENANCE ONY REQUIRES REMOVA OF BONNET. BASIC SPECIFICATIONS VAVE TYPE SWING CHECK VAVE MANUA SIZE 15 mm-200 mm (1/2 inch-8 inch) BODY MATERIA HI-PVC SEA MATERIA / SEAT EPDM FKM PTFE Viflon F FKM-F Viflon C FKM-C CONNECTION / FANGED JIS5K, JIS10K, DIN, ANSI FUID TEMPERATURE MAXIMUM WORKING PRESSURE (NORMA TEMPERATURE) MPa{kgf/cm 2 } 15mm 80mm 100mm 150mm 200mm HI-PVC 0 ~ {10.2} 0.7{7.1} 0.5{5.1} - 20 ~ {10.2} 0.7{7.1} 0.5{5.1} - 20 ~ {10.2} 0.7{7.1} 0.5{5.1} NOTE The maximum working pressure is he value including he waer hammer pressure. Be careful ha he maximum working pressure is no exceeded during use. Concerning he allowable pressure for each emperaure and maerial, see he echnical documens a he end of his caalog. NOTES FOR PIPING They can be used for boh horizonal and verical pipes, bu make sure during insallaion ha he arrow direcion of he valve body is aligned wih he flow direcion of he fluid. NOTES FOR USE If foreign maer such as dus is mixed in he fluid, he valve may no funcion properly. The plug (P/N 4 ) is no a drain plug for waer removal. Do no remove he plug o discharge waer since he valve may become unable o work properly. NOTE For informaion on how o drain waer, conac our sales office in your area. PARTS IST MANUA HI-PVC, 15 mm, 20 mm 25 mm 200 mm d X X X X X-X PART NO. / NAME QTY MATERIA 1 BODY 1 HI-PVC, 2 BONNET 1 HI-PVC, 3 SHAFT 1 HI-PVC, 4 PUG 1 HI-PVC, 5a DISC 1 HI-PVC, 5b SEAT HODER 1 HI-PVC, 5c BOT (A) (4) - HI-PVC, 5d ARM (4) 1 HI-PVC, PART NO. / NAME QTY MATERIA 5f NUT (A) (4) 1 HI-PVC, 5g PIN (3) 1 HI-PVC, 5h BOT (B) (1) 1 HI-PVC, 5i NUT (B) (1) 1 HI-PVC, 5j SEAT 1 5k O-RING (A) (1) 1 7 GASKET (B) 1 8 O-RING (B) 1 GASKET SEAT O-RING (B) O-RING (A) EPDM EPDM FKM FKM PTFE PFA (2) 5e WASHER (4) 1 HI-PVC, 9 BOT/NUT (4) - SUS304 5i 5b 5j 5a 5k 5h 5c 5b 5j 5a 5e 5f 5g NOTES (1) Used for 15 mm and 20 mm. (2) FKM + PFA coaing. (3) Used for he maerial of and sizes of 65 o 200 mm. (4) Used for 25 o 200 mm. 15 mm, 20 mm 25 mm 200 mm a 1 3 5d X X X X X-X PART NO. / NAME QTY MATERIA 1 BODY 1 2 BONNET 1 3 SHAFT 1 4 PUG 1 5a DISC 1 5b SEAT HODER 1 5c BOT (A) (3) - 5d ARM (3) 1 PART NO. / NAME QTY MATERIA 5g PIN (2) 1 5h BOT (B) (1) 1 5i NUT (B) (1) 1 5j SEAT 1 5k O-RING (A) (1) 1 7 GASKET (B) 1 8 O-RING (B) 1 GASKET SEAT O-RING (B) O-RING (A) EPDM EPDM FKM FKM 9 BOT/NUT (3) - SUS304 5e WASHER (3) 1 1a BODY RING (1) 1 SUS304 5f NUT (A) (3) 1 5i 5b 5j 5a 5k 5h 5c 5b 5j 5a 5e 5f 5g NOTES (1) Used for 15 mm and 20 mm. (2) Used for 65 o 200 mm. (3) Used for 25 o 200 mm. 147

4 PRODUCT MODE CODE IST MANUA ACTUATION V TYPE SC BONNET SEA OR BODY MATERIA SEA MATERIA CONNECTION F STANDARD SIZE V MANUA VAVE SC SWING OR O-RING I HI-PVC E EPDM F FANGED P V FKM F P PTFE/PFA 3 PTFE/Viflon -F 4 PTFE/Viflon -C When he seal maerial is EPDM or FKM, he maerial of O-ring is he same as ha of he seal. When he seal maerial is PTFE, he maerial of O-ring is PFA coaing or Viflon. 1 JIS10K 5 JIS5K D DIN A ANSI mm MANUA HI-PVC, 15 mm, 20 mm 25 mm 200 mm 15 mm, 20 mm 25 mm 200 mm D1 Hexagon, WAF: 36 D1 φd1 Hexagon, WAF: 36 φd1 φd d D φd φd H H H H mm NOTES 15 mm ype is processed from 20 mm. 32 mm ype is processed from 40 mm. Conac us regarding he combinaion of body maerial and seal maerial PTFE/PFA. SWING CHECK VAVE TYPE VSCOR CONNECTION / FANGED JIS, DIN, ANSI n-φh n- h n-φh n-φh JIS, DIN (Uni: mm) JIS5K JIS10K DIN PN10 mm d D1 H HI-PVC D C n h D C n h D C n h ANSI (Uni: inch) ANSI Class150 inch mm d D1 H HI-PVC D C n h 1/ / / / /

5 CHECK VAVE / WAFER CHECK VAVE WAFER CHECK VAVE STRENGTH CONCERNS OF PASTIC WAFER CHECK ARE RESOVED USING STRESS ANAYSIS. CORROSION RESISTANCE IS IMPROVED BY A-PASTIC WETTED PART AND COATED SPRING. WEIGHT IS 1/3 TO 1/5 OF THAT OF META TYPE. STOER-INTEGRATED STRUCTURE EIMINATES THE USE OF GASKET DURING PIPING, AOWING COST REDUCTION. BASIC SPECIFICATIONS MANUA VAVE TYPE SIZE WAFER CHECK VAVE 80 mm-300 mm (3 inch-12 inch) BODY MATERIA SEA MATERIA / O-RING EPDM FKM CONNECTION / WAFER JIS10K, DIN, ANSI FUID TEMPERATURE MAXIMUM WORKING PRESSURE (NORMA TEMPERATURE) MPa{kgf/cm 2 } 80mm 200mm 250mm, 300mm 0 ~ {10.2} 0.6{6.1} NOTES The maximum working pressure is he value including he waer hammer pressure. Be careful ha he maximum working pressure is no exceeded during use. Concerning he allowable pressure for each emperaure and maerial, see he echnical documens a he end of his caalog. NOTES FOR USE The maximum working pressure is he value including he waer hammer pressure. Be careful ha he maximum working pressure is no exceeded during use. The wafer check valve is mos suied for waer and sea waer lines. When i is used for a chemical line, conac us o check he chemical resisance. They can be used for boh horizonal and verical pipes, bu make sure during insallaion ha he arrow direcion of he valve body is aligned wih he flow direcion of he fluid. PARTS IST MANUA 125 mm (5 ), 150 mm (6 ), 250 mm (10 ), 300 mm (12 ) 80 mm (3 ), 100 mm (4 ), 200 mm (8 ) Cener of flange Cener of flow passage 10 2 Flow direcion 3 PART NO. / NAME QTY MATERIA 1 BODY 1 2 DISC 1 3 STOER 1 4 SHAFT 1 NOTE (1) No used for sandard ype. PART NO. / NAME QTY MATERIA 5 PUG 1 6 BOT 2 7 EYE BOT 1 SS400 (Unichrome plaing) 8 SPRING (1) 1 SWP-B (ETFE COATING) PART NO. / NAME QTY MATERIA 9 O-RING (A) 3 EPDM, FKM 10 O-RING (B) 1 EPDM, FKM 11 O-RING (C) 1 EPDM, FKM 149

6 PRODUCT MODE CODE IST MANUA ACTUATION V TYPE WC OPERATING SYSTEM BODY MATERIA ZZ U SEA MATERIA CONNECTION W STANDARD SIZE V MANUA VAVE WC WAFER CHECK ZZ NONE U E EPDM W WAFER V FKM D DIN A ANSI 1 JIS10K mm mm MANUA WAFER CHECK VAVE TYPE VWCZZ CONNECTION / WAFER JIS, ANSI, DIN 125 mm (5 ), 150 mm (6 ), 250 mm (10 ), 300 mm (12 ) 80 mm (3 ), 100 mm (4 ), 200 mm (8 ) E n n Cener of flange Cener of flow passage Flow direcion (Cener of flow passage) φd (Cener of flange) l E JIS, DIN (Uni: mm) JIS10K DIN PN10 mm d D l C n C n ANSI (Uni: inch) ANSI Class150 inch mm d D l C n

7 CHECK VAVE / BA CHECK VAVE BA CHECK VAVE PASTIC VAVE WITH HIGH RESISTANCE TO BOTH INTERNA AND EXTERNA CORROSION CAUSED BY SEA WATER, VARIOUS ACIDS AND AKAIS AND OTHER CHEMICAS. FOW PASSAGE STRUCTURE WITH OW FUID RESISTANCE SMA PARTS QUANTITY AND A SINGE CONNECTION REDUCE EXTERNA STRESS EFFECTS, AOWING HIGH FINISHING ACCURACY. IGHTWEIGHT AND SMA SIZE AOW INSTAATION IN NARROW SPACES AND FACIITATE DISASSEMBED CEANING. MANUA BASIC SPECIFICATIONS VAVE TYPE BA CHECK VAVE SIZE 15 mm-100 mm (1/2 inch-4 inch) BODY MATERIA SEA MATERIA / SEAT EPDM FKM ec. CONNECTION / FANGED JIS5K, JIS10K, DIN, ANSI JIS, DIN, ANSI Rc, Rp, NPT FUID MAXIMUM WORKING PRESSURE (NORMA TEMPERATURE) MPa{kgf/cm 2 } CONNECTION METHOD TEMPERATURE 15 mm 50 mm 80mm 100mm FANGED 0 ~ {10.2} 0.7{7.1} 0 ~ {10.2} 0.7{7.1} - 20 ~ {10.2} 0.5{5.1} ~ {10.2} 0.7{7.1} - NOTES The maximum working pressure is he value including he waer hammer pressure. Be careful ha he maximum working pressure is no exceeded during use. Concerning he allowable pressure for each emperaure and maerial, see he echnical documens a he end of his caalog. For flanged ype mm wih he body maerial of or, rue union ball check valves can be used. For deails, conac our sales office. NOTES FOR USE Make sure during piping ha he arrow direcion of he valve body is aligned wih he flow direcion of he fluid. Do no use he valve in a line where he fluid flow is very urbulen. Oscillaion of he ball may occur in he valve, causing breakage. Near pumps wih unsable flow, use AV swing check valves. PARTS IST MANUA FANGED a a PART NO. / NAME QTY MATERIA 1 BODY 1 PART NO. / NAME QTY MATERIA 8 STOP RING (B) (2) 1 2 BA 1 3 END CONNECTOR 1 4 UNION NUT 1 5 STOP RING (A) 1 6 TS FANGE (2) 1 7 PIPE (2) 1 FANGED,,,,,,, 9 SEAT 1 EPDM, FKM, ec. 4a RING (1) 2 SUS304 NOTES (1) Used for 15 o 25 mm for hreaded ype. (2) Used for flanged ype. 151

8 PRODUCT MODE CODE IST MANUA ACTUATION V TYPE BC OPERATING SYSTEM BODY MATERIA ZZ SEA MATERIA CONNECTION STANDARD SIZE NOTES V MANUA VAVE BC BA CHECK ZZ NONE and socke ypes are weld ype. socke ype compaible wih he JIS sandard is no available. U C P F E EPDM V FKM S N F FANGED P SPIGOT J JIS 1 JIS10K 5 JIS5K D DIN A ANSI For 32 mm and 65 mm flanged ypes, individual service may be available. Conac us for more deails. and flanged ypes are no produced mm mm MANUA BA CHECK VAVE TYPE VBCZZ CONNECTION / FANGED,, JIS, DIN, ANSI SPIGOT DIN FANGED n-φh 1 2 n-φh l l l l φd C P.C.D. φd1 C φd P.C.D. φd1 1 1' Taper 1/T Taper 1/T 1' 1 φd1 2 2 JIS (Uni: mm) FANGED JIS5K JIS10K JIS B 0203 mm d D D C n h D C n h d1 l 1/T d1 d2 l d1 l / Rc 1/ / Rc 1/ / Rc / Rc 1 1/ / Rc / Rc / Rc DIN (Uni: mm) SPIGOT DIN 2999 DIN 3442 DIN 8063 DIN mm d D1 d1 l d3 d1 l d1 d2 l l Rp 1/ Rp 1/ Rp Rp 1 1/ Rp Rp Rp ANSI (Uni: inch) inch mm d D1 FANGED ANSI CASS 150 ANSI/ASME B ASTM SCH D C n h d1 d2 l d1 d2 l d1 l 1/ /2-14NPT / /4-14NPT /2 NPT / /2-11 1/2NPT /2 NPT NPT NPT

9 CHECK VAVE / TRUE UNION BA CHECK VAVE TRUE UNION BA CHECK VAVE THE VAVE PARTS CAN BE REMOVED WITHOUT DISCONNECTING THE PIPES, BY OOSENING THE UNIONS ON BOTH SIDES BASIC SPECIFICATIONS VAVE TYPE TRUE UNION BA CHECK VAVE SIZE 15 mm-50 mm (1/2 inch-2 inch) BODY MATERIA SEA MATERIA / SEAT EPDM FKM ec. CONNECTION / FANGED DIN, ANSI DIN, ANSI Rp, NPT MANUA SPIGOT DIN FUID TEMPERATURE MAXIMUM WORKING PRESSURE (NORMA TEMPERATURE) MPa{kgf/cm 2 } CONNECTION METHOD FANGED -20 ~ {10.2} -20 ~ {10.2} NOTES The maximum working pressure is he value including he waer hammer pressure. Be careful ha he maximum working pressure is no exceeded during use. Concerning he allowable pressure for each emperaure and maerial, see he echnical documens a he end of his caalog. PARTS IST MANUA FANGED a SPIGOT 3a PART NO. / NAME QTY MATERIA 1 BODY 1 2 BA 1 PART NO. / NAME QTY MATERIA 8 STOP RING (B) (2) 2 9 SEAT 1 EPDM, FKM, ec. 3 END CONNECTOR 2 4 UNION NUT 2 5 STOP RING (A) 1,,, 10 O-RING 1 EPDM, FKM, ec. 4a RING (1) 2 SUS304 NOTES (1) Used for 15 o 25 mm for hreaded ype. (2) Used for flanged ype. 153

10 FANGED n~ h D d D1 SPIGOT φd₁ ₃ D1 d1 d2 d PRODUCT MODE CODE IST MANUA ACTUATION V TYPE TC OPERATING SYSTEM BODY MATERIA ZZ SEA MATERIA CONNECTION STANDARD SIZE V MANUA VAVE TC TRUE UNION BA CHECK ZZ NONE U C P F E EPDM V FKM S N F FANGED P SPIGOT D DIN A ANSI mm mm MANUA TRUE UNION BA CHECK VAVE TYPE VTCZZ CONNECTION / FANGED,,, SPIGOT DIN D1 d1 d l DIN (Uni: mm) FANGED DIN PN10 mm d D1 DIN 8063 DIN D C n h d1 l d1 d2 l mm d3 SPIGOT DIN 3442 DIN 2999 l l l Rp 1/ Rp 3/ Rp Rp 1 1/ Rp d1 l ANSI (Uni: inch) inch mm d D1 FANGED ANSI Class 150 ANSI/ASME B D C n h ASTM SCH40 d1 d1' l d1 d2 l d1 l 1/ /2-14NPT / /4-14NPT /2NPT / /2-11 1/2NPT /2NPT

11 CHECK VAVE / BA FOOT VAVE BA FOOT VAVE INTEGRA MODING WITH SCREEN INCREASES STRENGTH AT CONNECTION AREA. FOW PASSAGE STRUCTURE WITH OW FUID RESISTANCE SMA PARTS QUANTITY AND A SINGE CONNECTION REDUCE EXTERNA STRESS EFFECTS, AOWING HIGH FINISHING ACCURACY. IGHTWEIGHT AND SMA SIZE AOW INSTAATION IN NARROW SPACES AND FACIITATE DISASSEMBED CEANING. BASIC SPECIFICATIONS VAVE TYPE BA FOOT VAVE SIZE 15 mm-100 mm (1/2 inch-4 inch) BODY MATERIA SEA MATERIA / SEAT EPDM FKM ec. CONNECTION / FANGED JIS5K, JIS10K, DIN, ANSI JIS, DIN, ANSI Rc, Rp, NPT FUID TEMPERATURE MAXIMUM WORKING PRESSURE (NORMA TEMPERATURE) MPa{kgf/cm 2 CONNECTION METHOD } 15 mm 50 mm 80mm 100mm FANGED 0 ~ {10.2} 0.7{7.1} 0 ~ {10.2} 0.7{7.1} - 20 ~ {10.2} 0.5{5.1} ~ {10.2} 0.7{7.1} - MANUA NOTES The maximum working pressure is he value including he waer hammer pressure. Be careful ha he maximum working pressure is no exceeded during use. Concerning he allowable pressure for each emperaure and maerial, see he echnical documens a he end of his caalog. PARTS IST MANUA FANGED a PART NO. / NAME QTY MATERIA 1 BODY 1 PART NO. / NAME QTY MATERIA 9 SEAT 1 EPDM, FKM, ec. 2 BA 1 4 UNION NUT 1 5 STOP RING (A) 1 6 TS FANGE 1 7 PIPE 1 8 SCREEN 1 FANGED,,,,,,, 4a RING (1) 1 SUS304 NOTES (1) Used for 15 o 25 mm for body maerial of and connecion of hreaded ype. (2) Used for flanged ype. (3) flanged ype is no produced. 155

12 PRODUCT MODE CODE IST MANUA ACTUATION V TYPE FT OPERATING SYSTEM BODY MATERIA ZZ SEA MATERIA CONNECTION STANDARD SIZE V MANUA VAVE FT BA FOOT ZZ NONE U C P F E EPDM V FKM S N F FANGED J JIS 1 JIS10K 5 JIS5K D DIN A ANSI mm mm NOTES and socke ypes are weld ype. sockes are of DIN ype only. For 32 mm and 65 mm flanged ypes, individual service may be available. Conac us for more deails. and flanged ypes are no produced. MANUA BA FOOT VAVE TYPE VFTZZ CONNECTION / FANGED, JIS, DIN, ANSI Rc, Rp, NPT FANGED n-φh l l φd1 φd Taper 1/T JIS (Uni: mm) FANGED JIS5K JIS 10K mm D1 d d2 l D C n h D C n h d1 l 1/T d1 d2 l / Rc 1/ / Rc 1/ / Rc / Rc 1 1/ / Rc / Rc / Rc DIN (Uni: mm) mm d1 l d1 d1' l d2 l Rp 1/ Rp 3/ Rp Rp 1 1/ Rp Rp Rp ANSI (Uni: inch) FANGED inch mm d D1 D C n h d1 d1' l d2 l 1/ /2-14NPT / /4-14NPT /2 NPT / /2-11 1/2NPT /2 NPT NPT NPT

CHECK VALVE P.147 SWING CHECK VALVE P.149 WAFER CHECK VALVE P.151 BALL CHECK VALVE P.153 TRUE UNION BALL CHECK VALVE P.155 BALL FOOT VALVE

CHECK VALVE P.147 SWING CHECK VALVE P.149 WAFER CHECK VALVE P.151 BALL CHECK VALVE P.153 TRUE UNION BALL CHECK VALVE P.155 BALL FOOT VALVE CHECK VAVE P.47 P.49 P.5 P.53 P.55 SWING CHECK VAVE WAFER CHECK VAVE BA CHECK VAVE TRUE UNION BA CHECK VAVE BA FOOT VAVE 45 PERFORMANCE OF SWING CHECK VAVE, BA CHECK VAVE, AND BA FOOT VAVE Min. Pressure

More information

New Higher Pressure Rating

New Higher Pressure Rating New igher Pressure Raing Specificaions Sizes: " 8" Modes: anged (ANSI) Connecion Ony ever and Weigh Opion Bodies: I-PVC, and Seas: EPDM, KM, PTE Sea: EPDM, KM, PTE Sandard eaures (Sizes " 8") Minimum fow

More information

15 50mm mm TYPE TA TYPE AA TYPE VC TYPE T TYPE V

15 50mm mm TYPE TA TYPE AA TYPE VC TYPE T TYPE V B VVE INEUP PPICTION TYPE MTERI 21α 15 50mm FOR CEMICS FOR WTER 21 WTER B VVE 15 50mm 65 100mm 15 50mm 3 WY B 23 15 100mm 23 25 40mm B COCK 1/4 3/8inch COMPCT 13 80mm VIBE OPTIONS UTOMTIC Opions oher han

More information

BALL VALVE. BALL VALVE TYPE 21, 21α WATER BALL VALVE 3 WAY BALL VALVE TYPE 23 3 WAY BALL VALVE TYPE 23 H LAB COCK COMPACT BALL VALVE TYPE 27 P.

BALL VALVE. BALL VALVE TYPE 21, 21α WATER BALL VALVE 3 WAY BALL VALVE TYPE 23 3 WAY BALL VALVE TYPE 23 H LAB COCK COMPACT BALL VALVE TYPE 27 P. B VVE P.043 P.053 P.057 P.063 P.065 P.067 B VVE TYPE 21, 21α WTER B VVE 3 WY B VVE TYPE 23 3 WY B VVE TYPE 23 B COCK COMPCT B VVE TYPE 27 041 B VVE INEUP PPICTION TYPE MTERI 21α 15 50mm FOR CEMICS FOR

More information

Flow Monitor FS10. Description FS10-.. Connection diagram FS10. Ordering information. Electrical connection. Flow rate ranges FS 10

Flow Monitor FS10. Description FS10-.. Connection diagram FS10. Ordering information. Electrical connection. Flow rate ranges FS 10 Flow Monior FS0 Descripion Compac single poin flow monior, MIN or MAX monioring opions, suiable for waer, oil, air or media wih similar hermal conduciviies. Wih screw-in or plug-in ype monioring head for

More information

Flow Monitor FS10. Description FS10-.. Connection diagram FS10. Ordering information. Electrical connection. Flow rate ranges

Flow Monitor FS10. Description FS10-.. Connection diagram FS10. Ordering information. Electrical connection. Flow rate ranges Flow Monior FS0 Descripion Compac single poin flow monior, MIN or MAX monioring opions, suiable for waer, oil, air or media wih similar hermal conduciviies. Wih screw-in or plug-in ype monioring head for

More information

Item 501M. 3-Way Metal Seated Ball Valve. ASME 150/ 300 & 800 psi SIZE: 1/2"-2"

Item 501M. 3-Way Metal Seated Ball Valve. ASME 150/ 300 & 800 psi SIZE: 1/2-2 Item M 3-Way Metal Seated Ball Valve ASME / 300 & 800 psi : -" ZIPSON'S M type, 3-way metal seated ball valve is a totally unique valve design for critical working condition of high working temperature

More information

BS 1452 Gr Gr. 420/ Gr. 420/ AB2 304 C C S S S S16. E mm

BS 1452 Gr Gr. 420/ Gr. 420/ AB2 304 C C S S S S16. E mm WAFER TYPE BUTTERFY VAVE SPECIFICATION FOR BS EN 1092-2 PN10 / PN16 FANGE MOUNTING FACE-TO-FACE DIMENSION TO ISO 5752 / BS 5155 / BS EN 593 EVER / WORM GEAR OPERATOR PRESSURE / TEMPERATURE RATINGS BFV-WB

More information

(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST IRON INVERTED BUCKET STEAM TRAP

(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST IRON INVERTED BUCKET STEAM TRAP (ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP ST-B1B2 ST-B3 ST-B4 (ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP MATERIAL PARTS Cap and Body Valve Seat Valve Gasket Material

More information

True Union Ball Valve (BN) Product Category. Compact Ball. 2-pieces Compact Ball. Single Union Without Support. Ball Valve. True Union Without Support

True Union Ball Valve (BN) Product Category. Compact Ball. 2-pieces Compact Ball. Single Union Without Support. Ball Valve. True Union Without Support Sekisui Industrial Piping Co., Ltd. located in the Chungkang Export Processing Zone of Taichung City in Taiwan. From March of 2006, Sekisui Industrial Piping Co., Ltd. was established as a wholly-owned

More information

Floating Ball Valve - Design Features

Floating Ball Valve - Design Features 408 imbledon Rd. / Edmond, OK 73003 / Phone: 405-509-2665 / Fax: 866-239-1587 / www.mako-products.net Flanged Ball Valves Floating Ball Valve - Design Features Mounting and Stem Seal Design Actuator Mounting

More information

BUTTERFLY VALVE VF-7 Series

BUTTERFLY VALVE VF-7 Series BUTTERFLY VALVE VF-7 Series CENTRIC, RUBBER SEATED LEVER GEAR PNEUMATIC - ELECTRIC OPERATED ALLOWABLE PRESSURE DN 40 300mm : 16 bar DN 350 1200mm : 10 bar INVESTMENT CASTING STAINLESS STEEL BODY 2 12 (50mm

More information

INSTALLATION AND MAINTENANCE MANUAL for ST400-C339 SOLENOID VALVE

INSTALLATION AND MAINTENANCE MANUAL for ST400-C339 SOLENOID VALVE 04666358 Edition 2 February, 1999 INSTALLATION AND MAINTENANCE MANUAL for ST400-C339 SOLENOID VALVE. IMPORTANT SAFETY INFORMATION ENCLOSED. READ THIS MANUAL BEFORE OPERATING VALVE. IT IS THE RESPONSIBILITY

More information

I N F L O W S Y S T E M S VALVULA DE RETENCIÓN

I N F L O W S Y S T E M S VALVULA DE RETENCIÓN PROUC TOS Y SOUCIONES EN REES E FUIOS PROUCTS AN SOUTIONS I N F O W S Y S T E M S VAVUA E RETENCIÓN CHECK VAVE Index 0 0 0 0 07 08 09 0 7 8 0 Features of ual Plate R wafer dual plate check valve R0 class

More information

BUTTERFLY VALVE WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) and 41001

BUTTERFLY VALVE WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) and 41001 Operation WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) 41101 and 41001 C ont R o L Description Edition Wafer type butterfly valve 411 (410) series are used in industrial

More information

Pigmented Polypropylene. Piping System

Pigmented Polypropylene. Piping System Pigmented Polypropylene Piping Sytem Photo courtey of Agape Water Solution Inc. 75 - Specification PP-Pure Pigmented Polypropylene (PP) High Purity Piping Sytem REV:HP0512PP Material: ASTM D4101 Group

More information

Prestolok. Spark resistant push-in fittings for fluids. Catalogue /UK

Prestolok. Spark resistant push-in fittings for fluids. Catalogue /UK Spark resistant push-in fittings for fuids Cataogue 352-/UK Cataogue 352-/UK Index Straight connectors Mae - BSPT Mae - Metric Mae - BSPT Mae - NPTF F23PB - p. C F2PB - p. C F3PB - p. C FPB - p. C Mae

More information

Angle Seat Globe Valve, Metal

Angle Seat Globe Valve, Metal Angle Seat Globe Valve, Metal Construction The GEMÜ manually operated 2/2-way angle seat globe valve has an ergonomically designed plastic handwheel. The valve spindle is sealed by a self-adjusting gland

More information

TKD Series 3-Way Ball Valves Product Data Sheet

TKD Series 3-Way Ball Valves Product Data Sheet Product Data Sheet < SANDARDS > ASM D1784 ASM D2466 ASM D2467 ASM D2464 ASM F1498 introduction IPEX KD Series 3-Way Ball Valves can be used for flow diverting, mixing, or on/off isolation. hey will replace

More information

Praher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.

Praher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation. Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8-4 /16mm - 110mm Features Lockable Handle (Lock not supplied) True

More information

Praher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.

Praher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation. Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8" - 4"/16mm - 110mm Features Lockable Handle (Lock not supplied) True

More information

3 PC FULL BORE BALL VALVE

3 PC FULL BORE BALL VALVE Pressure (Bar) 3 PC FULL BORE BALL VALVE 3 PC FULL BORE 1000PSI STAINLESS STEEL THREADED/SOCKET WELD END BALL VALVE Feature: 3 PC Body Design Full Bore, Quarter turn operation Size: 1/4 4 (DN8-100) Working

More information

Series VCHC MPa Check Valve 06 G VCHC40 TMH ASD AS AS-FG AS-FP AS-FM ASP ASN AQ ASV AK VCHC ASS. How to Order. Specifications AS-FE KE

Series VCHC MPa Check Valve 06 G VCHC40 TMH ASD AS AS-FG AS-FP AS-FM ASP ASN AQ ASV AK VCHC ASS. How to Order. Specifications AS-FE KE Ma Check Valve Series How o Order Using NSF-H cerified grease for he guide ring (sliding) secion Symbol Improved durabiliy in high- environmens by using a polyurehane elasomer poppe 06 G or size 06 3/4

More information

General Catalog (Pipe & Fittings)

General Catalog (Pipe & Fittings) General Caalog (Pipe & Fiings) ASAI AV will no change. Wha we have mainained since he esablishmen of he company in 1945. I is a "sincere aiude oward cusomers". We have conribued o our cusomers and hereby

More information

CHECK VALVES DUAL PLATE CHECK VALVES (DC SERIES) NOZZLE CHECK VALVES (NC SERIES)

CHECK VALVES DUAL PLATE CHECK VALVES (DC SERIES) NOZZLE CHECK VALVES (NC SERIES) CHECK VAVES DUA PATE CHECK VAVES (DC SERIES) NOZZE CHECK VAVES (NC SERIES) eading Korean valve manufacturer DUA PATE CHECK VAVE (DC SERIES) Range Size Fluid Application 1 1/2 (40A) ~ 84 (2100A) Water,

More information

RCM - Direct Reading Flowmeters

RCM - Direct Reading Flowmeters Compact Design Easy to Install Horizontal or Vertical Installation Flow Rates up to 3000 GPM (Liquid) or 20000 SCFM (Gas) Low Pressure Drop Optional Alarms and Output Signals Accuracy: ± 3% of full scale

More information

PPN Piping System. Cost Effective Purity

PPN Piping System. Cost Effective Purity PPN Piping Sytem Cot Effective Purity 45 - Specification PolyPure Natural Polypropylene (PPn) High Purity Piping Sytem REV:HP0512PN Material: ASTM D4101 Group 2, Cla 1 natural polypropylene random copolymer

More information

MOTORISED VALVES. stainless steel body threaded ports, 3/8-1/2-3/4. Translucent polyamide (PA) PA66, GB 30% (ball fibre reinforced)

MOTORISED VALVES. stainless steel body threaded ports, 3/8-1/2-3/4. Translucent polyamide (PA) PA66, GB 30% (ball fibre reinforced) MOTORISE VALVES sainless seel body hreaded pors, /8 - / - / / Series 90 FEATURES High f due o angled sea design Ani-waerhammer design (fluid enry under he disc) Acuaor roaable hrough 60 Mainaining posiion

More information

Section - L. Antipollution devices

Section - L. Antipollution devices Section - Antipollution devices ANTIPOUTION DEVICES EXAMPE OF APPICATION 2 3 3 2 4 1 1 Backflow preventer unit. 2 Backflow preventers with unregulated pressure zone. 3 Anti siphon devices. 4 Anti siphon

More information

KBF100. General Service Butterfly Valve KBF. Hot to Order System KOPECS CO.,LTD. EASBL TEL : FAX :

KBF100. General Service Butterfly Valve KBF. Hot to Order System KOPECS CO.,LTD. EASBL TEL : FAX : KBF100 General Service Butterfly Valve KOPECS Butterfly Valve Features KOPECS unique seat sealing esign offers frictional contact between valve disc and seat: ㆍ ㆍ Zero leakage,tight shut off ㆍ Lower torque

More information

Modular valve block MVB 100/200

Modular valve block MVB 100/200 Modular valve block MVB 100/200 Nominal size DN 15 Nominal size 1/2 Nominal pressure PN 6 bar www.asv-stuebbe.com/produkte/armaturen Characteristics MVB 100 Ideal for realising dosing and distribution

More information

Constant Flow Valves. Specifications Sizes: PVC: 1/2", 3/4", 1", 2", 3", 4" CPVC: 1" and 2" Body: Bonnet: Models: Seals: Springs:

Constant Flow Valves. Specifications Sizes: PVC: 1/2, 3/4, 1, 2, 3, 4 CPVC: 1 and 2 Body: Bonnet: Models: Seals: Springs: Constant Flow Valves Standard Features (Sizes " 4") Body and bonnet are of solid PVC or CPVC All wetted parts are of thermoplastic and elastomeric materials for superior corrosion resistance A preset constant

More information

WCV Series Full Pattern Wafer Check Valves 2 TO 8 PVC AND CVPC

WCV Series Full Pattern Wafer Check Valves 2 TO 8 PVC AND CVPC WCV Series Full Pattern Wafer Check Valves 2 TO 8 PVC AND CVPC KEY FEATURES Robust Full Pattern Body PVC and CPVC No Special Spacers or Flanges Required High Cv Rating Equal to Metal Check Valves, Saves

More information

Advanced PE Single Wall Piping System

Advanced PE Single Wall Piping System Advanced PE Single Wall Piping System 8 - Specification Black Polyethylene (Advanced PE) Piping System REV:IN0512PE Materials: Pipe Production: ASTM D3350 cell classification PE445584C. Resin shall comply

More information

BUTTERFLY VALVES DOUBLE ECCENTRIC BUTTERFLY VALVES (HPB SERIES) TRIPLE OFFSET BUTTERFLY VALVES (TRB SERIES) SUNGWON AUTOMATION CO.,LTD.

BUTTERFLY VALVES DOUBLE ECCENTRIC BUTTERFLY VALVES (HPB SERIES) TRIPLE OFFSET BUTTERFLY VALVES (TRB SERIES) SUNGWON AUTOMATION CO.,LTD. BUTTERFY VAVES BUTTERFY VAVES DUBE ECCENTRIC BUTTERFY VAVES (HPB SERIES) TRIPE FFSET BUTTERFY VAVES (TRB SERIES) SUNGWN AUTMATIN C.,TD. DUBE ECCENTRIC BUTTERFY VAVE Range Application Size 2 (50A) ~ 80

More information

2/2 MOTORISED VALVES. stainless steel body threaded ports, 3/8-1/2-3/4. Series

2/2 MOTORISED VALVES. stainless steel body threaded ports, 3/8-1/2-3/4. Series MOTORISE VALVES sainless seel body hreaded pors, /8 / / / Series 9 FEATURES High flow due o angled sea design Aniwaerhammer design (fluid enry under he disc) Acuaor roaable hrough 6 In opion closing of

More information

BALL valve FLOATING BALL VALVE

BALL valve FLOATING BALL VALVE BA valve FOATING BA VAVE BA VAVE APPICATION Because of their excellent operating characteristics, ball valves are used for the broadest spectrum of isolation applications and are available in a wide range

More information

ORIFLO CONTENTS COST EFECTIVE FLOW MEASUREMENT FOR LIQUIDS AND GASES INTEGRATED ORIFICE FLOWMETERS GENERAL FEATURES MAIN APPLICATIONS

ORIFLO CONTENTS COST EFECTIVE FLOW MEASUREMENT FOR LIQUIDS AND GASES INTEGRATED ORIFICE FLOWMETERS GENERAL FEATURES MAIN APPLICATIONS COST EFECTIVE FLOW MEASUREMENT FOR LIQUIDS AND GASES ORIFLO INTEGRATED ORIFICE FLOWMETERS GENERAL O series ORIFLO METER is a By-pass Orifice type flowmeter. Small sized variable flowmeter is installed

More information

LATEST ARRIVALS CATALOGUE STOCK

LATEST ARRIVALS CATALOGUE STOCK LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Normally Closed, Normally

More information

O-180/780 Series ORIFLO METER COST EFECTIVE FLOW MEASUREMENT FOR LIQUIDS AND GASES GENERAL FEATURES MAIN APPLICATIONS

O-180/780 Series ORIFLO METER COST EFECTIVE FLOW MEASUREMENT FOR LIQUIDS AND GASES GENERAL FEATURES MAIN APPLICATIONS COST EFECTIVE FLOW MEASUREMENT FOR LIQUIDS AND GASES O-18/78 Series ORIFLO METER GENERAL O Series ORIFLO METER is a By-pass Orifice type flowmeter. Small sized variable flowmeter is installed onto measuring

More information

16 bar standard 25 bar - option Tightness class ISO 5208, EN Standard - RATE B, Option RATE A RATE A. 16 bar standard 25 bar - option

16 bar standard 25 bar - option Tightness class ISO 5208, EN Standard - RATE B, Option RATE A RATE A. 16 bar standard 25 bar - option Operation WAFER TYPE stainless steel C ont R o L Description Edition Wafer type butterfly valve is an on-off and control valve for demanding industrial pipelines. The valve is tight to both directions

More information

Large chamber type level gauge. Model : L110, L210. Description. Model LEVEL GAUGE GLASS. Model - L110. Model - L220

Large chamber type level gauge. Model : L110, L210. Description. Model LEVEL GAUGE GLASS. Model - L110. Model - L220 Large chamber type level gauge Model : L110, L210 Description Model Model - L110 Chamber material - Carbon steel, stainless steel MAX. pressure - 14MPa Vessel connection - 25A, 40A, 50A Model - L220 Chamber

More information

INSTRUMENTATION BALL VALVES VB3 Series

INSTRUMENTATION BALL VALVES VB3 Series INSTRUMENTATION BALL VALVES VB3 Series www.korokusa.com Kor-Lok USA eatures Directiona ande Pressure rating wit standard PTE seats 3000psig (206bar) ony for te vaves wit orifice 4.8 2500psig (172bar) for

More information

VT Series 3-Way Ball Valves Product Data Sheet. Valve Availability. Size Range: 1/2" through 2" EPDM or Viton (FPM)

VT Series 3-Way Ball Valves Product Data Sheet. Valve Availability. Size Range: 1/2 through 2 EPDM or Viton (FPM) Product Data Sheet < SANDARDS > introduction ASM D1784 ASM D4101-86 ASM D2466 ASM D2467 ASM D2464 ASM F1498 IPEX can be used for flow diverting, mixing, or on/off isolation. hey will replace a ee + 2 valve

More information

BALL VALVES BUTTERFLY VALVES GLOBE VALVES GATE VALVES CHECK VALVES KNIFE VALVES Y STRAINERS ACTUATION BALL VALVES SS2020N-300 2 PIECE FLANGED ANSI 300 BALL VALVE Firesafe Certified Full Bore TMF1600 seats

More information

manual valves inch sizes

manual valves inch sizes Spears True Union 2000 Industrial Vented Ball Valve Description: In-line double union ball valve Maximum Fluid Pressure at 20 C: All sizes 1 /2 to 2-16 bar; sizes 2 1 /2 to 4-10 bar; all sizes flanged

More information

INTEGRAL BONNET FORGED NEEDLE VALVES. VN5 Series.

INTEGRAL BONNET FORGED NEEDLE VALVES. VN5 Series. INTEGRA BONNET FORGED NEEDE VAVES VN5 Series www.uniok.com Vaves - VN5 Series Features ressure rating up to 5000psig (340bar) @38 C (00 F) Temperature rating from -53 C(-65 F) to 232 C (450 F) wit standard

More information

Diaphragm valve MV 309

Diaphragm valve MV 309 Diaphragm valve MV 309 Nominal size DN 15 32 Nominal size 1/2 1 1/4 Pressure PN 6 bar Features pneumatic diaphragm valve DN 15 32 compact piston drive for medium pressure up to 6 bar (PTFE diaphragms)

More information

Heat-Resistant 065. C-PVC Pipe & Fittings. C-PVC Pipe C-PVC Fittings Expansion Joint/Prefab Joint Flange Welding Rod Technical Document P.066 P.

Heat-Resistant 065. C-PVC Pipe & Fittings. C-PVC Pipe C-PVC Fittings Expansion Joint/Prefab Joint Flange Welding Rod Technical Document P.066 P. C-PVC Pipe & Fiings C-PVC Pipe C-PVC Fiings Expansion Join/Prefab Join Flange Welding od Technical Documen P.066 P.067 P.075 P.077 P.077 P.078 ea-esisan 065 C-PVC Pipe & Fiings PODUCT MODE CODE IST Type

More information

CONTROL VALVE STANDARD SPECIFICATION

CONTROL VALVE STANDARD SPECIFICATION CONTROL VALVE STANDARD SPECIFICATION QUICK CHANGE TYPE 2-WAY GLOBE VALVE YAD-122Q1 Series http://www.proval.co.kr PROVAL Co., Ltd. [B-1] TOP GUIDE SINGLE SEATED TYPE GENERAL The design of Quick Change

More information

KBF200. High Performance Butterfly Valve. KBF200series Valve Sealing Principle KOPECS CO.,LTD. web :

KBF200. High Performance Butterfly Valve. KBF200series Valve Sealing Principle KOPECS CO.,LTD. web : KBF200 High Performance Butterfly Valve KBF200series Valve Sealing Principle 1 web : www.kopecs.com E-mail : kopecs@kopecs.com KOPECS CO.,LTD. TEL : +82-32-865-1711 FAX : +82-32-865-1718 KBF200 High Performance

More information

flowit by Fig. FTBGW-20 Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Material Specifications Dimensions (mm)

flowit by Fig. FTBGW-20 Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Material Specifications Dimensions (mm) flowit flowit by Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Fig. FTBGW-20 Designed to BS 5154 Pressure Rating: PN20 Threaded Bonnet End connection: BS21 Taper Threaded (ISO 7) / BS EN10226-2 Shell

More information

BUTTERFLY VALVE WAFER TYPE of carbon steel 311 ( ) series

BUTTERFLY VALVE WAFER TYPE of carbon steel 311 ( ) series Operation WAFER TYPE of carbon steel 311 (310-312) series C ont R o L Description Edition 23-07-2015 Wafer type butterfly valve 311 (310 312) series is used in industrial pipelines for demanding on-off

More information

XSz 8... XSz 50 Solenoid actuated fail-safe safety valve

XSz 8... XSz 50 Solenoid actuated fail-safe safety valve > > /-way or size: G /4... G, /4... NT > > ouble valve conrol sysem, inherenly failsafe wihou residual pressure > > ynamic self monioring > > For use wih pneumaic cluch and brake sysems and oher -way safey

More information

DK-Lok UHP Fittings. No.09-01(E) May 2017

DK-Lok UHP Fittings. No.09-01(E) May 2017 K-ok UP Fittings No.09-01() May 2017 ean UP Fitting ontents ean Wed Fittings Micro bow WM Micro ee WM Micro ross ee WMX Micro ribow WMB Micro af bow WM Micro Reducing bow WMR Micro Reducing ee WMR 05 05

More information

1" 42" SBP Butterfly Valves plastomer-lined PM 51 us /

1 42 SBP Butterfly Valves plastomer-lined PM 51 us / 1" 42" SBP Butterfly Valves are ideally suited for Shut-off, Flow Control and Throttling of corrosive and abrasive process media in either liquid, powdery or gaseous state. Modular Design Valves are available

More information

Angle Seat Globe Valve, Metal

Angle Seat Globe Valve, Metal Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a plastic pneumatic piston actuator. The valve spindle is sealed by a self-adjusting gland packing or a compact

More information

3 way ball valve S4 hand operated

3 way ball valve S4 hand operated General: Symbolfoto Material: PVC-U / PP / PVDF Sealing material: EPDM / FPM Ball seating joint: PTFE Ball: T- oder L-Bohrung Dimensions: DN0 (DN5 / d6 / d/8 ) DN5 d0 d/ DN0 (DN5 / d5 / d/4 ) DN5 d d DN

More information

611, 671. Diaphragm Valve, Metal

611, 671. Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic bonnet and an integral optical position indicator as standard. Features

More information

HDT1000 series ORIFLO METER. Multi-function Digital Flowmeter OUTLINE STANDARD SPECIFICATION FEATURES MAIN APPLICATIONS INDICATOR SPECIFICATION

HDT1000 series ORIFLO METER. Multi-function Digital Flowmeter OUTLINE STANDARD SPECIFICATION FEATURES MAIN APPLICATIONS INDICATOR SPECIFICATION ORIFO METER HDT series Multifunction Digital Flowmeter OUTINE HDT is a new series Oriflo meter combining orifice plate with multidigital indicator. HDT detects differential pressure exerted by flow velocity

More information

ABOVE GROUND TANKS 66 WATER DIVISION ROTOTEC

ABOVE GROUND TANKS 66 WATER DIVISION ROTOTEC OVE GROUND TNKS 66 WTER DIVISION ROTOTEC WTER DIVISION ROTOTEC 67 VERTICLE From 50 to 10000 itres Instaation Paced directy on a fat supporting surface vaiabe coours: standard on request Ø Cover Inet Outet

More information

PNEUMATIC ON OFF GLOBE VALVE

PNEUMATIC ON OFF GLOBE VALVE PNEUMATIC ON OFF GLOBE VALVE Model No. AGE0 SERIES s Bonnet -way globe valve, -way globe valve 1A(1/") ~ 00A(1") JIS 10K~K, ANSI 10#~900#, PN10~, etc. FF, RF, BW, SW Plain bonnet: -17 ~0 Extended bonnet:

More information

DN25 DN1000 resp. 1" 42"

DN25 DN1000 resp. 1 42 DN25 DN1000 resp. 1" 42" SBP Butterfly Valves are ideally suited for Shut-off, Flow Control and Throttling of corrosive and abrasive process media in either liquid, powdery or gaseous state. Modular Design

More information

Mark 908 Series. Pressure Regulators Mark 908X Piloted Blanketing Regulators

Mark 908 Series. Pressure Regulators Mark 908X Piloted Blanketing Regulators Pressure Regulators Mark 908X Piloted Blanketing Regulators Mark 908 Series 3/4" - 1" (DN20 - DN25) Low Pressure Blanketing (Gas overlay) PRV for medium to large Stainless and SUD vessels The Mark 908

More information

Mark 695 Series. Pressure Regulators Mark 695 Piloted Tank Blanketing Regulators. Piloted Tank Blanketing Regulator 3/4"- 1" Optional Features

Mark 695 Series. Pressure Regulators Mark 695 Piloted Tank Blanketing Regulators. Piloted Tank Blanketing Regulator 3/4- 1 Optional Features Mark 695 Series Piloted Tank Blanketing Regulator 3/4"- 1" The Mark 695 Series piloted soft seat regulator was designed specifically to provide accurate pressure control on very low pressure tank blanketing

More information

PNEUMATICALLY ACTUATED 2-WAY

PNEUMATICALLY ACTUATED 2-WAY 482 DN 25-65 The 482 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing

More information

Section 2. Pipe, Valves and Fittings Sizes ¼" to 12" Schedule 80 CPVC Piping System. Serviced by GF Little Rock

Section 2. Pipe, Valves and Fittings Sizes ¼ to 12 Schedule 80 CPVC Piping System. Serviced by GF Little Rock Section 2 Schedule 80 CPVC Piping System Pipe, Valves and Fittings Sizes ¼" to 12" Serviced by GF Little Rock Effective March 27, 2006 Glossary Std. Pack = Standard Carton Quantity FP = Female Pipe hread

More information

VR Piston Check Valves Submittal Data Sheet. Job or Customer: Engineer: Contractor: Submitted by: Approved by: Order No: Specification: introduction

VR Piston Check Valves Submittal Data Sheet. Job or Customer: Engineer: Contractor: Submitted by: Approved by: Order No: Specification: introduction Submittal Data Sheet Job or Customer: Engineer: Contractor: Submitted by: Approved by: Order No: Specification: Date Date Date introduction < STANDARDS > The IPEX VR Piston Check Valve is an ideal solution

More information

Unlined valves with flanged ends

Unlined valves with flanged ends Main Parts and Materials Unlined valves with flanged ends NO. PART MATERIA 1 2 DIAPHRAGM BODY WC_ Cast Iron EN-J1040 (GG25) WD_ RUBBER Ductile Iron EN-JS1030 (GGG40) Natural (D10) / EPDM (D20) / Butyl

More information

Valves for building. Y-strainers... page 204 PVC valves Ball valves... page 204 Butterfly valve... page 204 Ball check valve...

Valves for building. Y-strainers... page 204 PVC valves Ball valves... page 204 Butterfly valve... page 204 Ball check valve... Valves for building Ball valves PN25/20... page 194 PN30/20... page 195 PN40/30 - Lead-free brass... page 196 Valve for gas... page 197 Stem extension valves... page 197 3 way valves... page 197 Mini valves...

More information

Stainless Steel Valves

Stainless Steel Valves Stainless Steel Valves A-261T Y-Strainer screwed end, PN40, PSI800 Investment casting body Maximum working temperature 230 C The end-to-end length conforms to DIN 3202, Part 4. M8series (PN40) Thread ends

More information

DOUBLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.7

DOUBLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.7 Application Double-eccentric butterfly valves are industrial valves, which are designed to fully open or close the passage of the working medium flowing through a pipeline. They can also be used for flow-control

More information

R o L. BUTTERFLY VALVE of carbon steel with welded ends 313 -series BLUE LINE. Description

R o L. BUTTERFLY VALVE of carbon steel with welded ends 313 -series BLUE LINE. Description of carbon steel 313 -series C ont R o L Description Edition 23-07-2015 The welded butterfly valve 313 is specially designed for district heating and district cooling. It can be used as an on-off or control

More information

R677. Diaphragm Valve, Plastic

R677. Diaphragm Valve, Plastic Diaphragm Valve, Plastic Construction All medium wetted parts, the bonnet and handwheel of the GEMÜ 2/2-way diaphragm valve are made of plastic. The low maintenance plastic bonnet has an ergonomically

More information

Valves for building. Y-strainers... page 272 PVC valves Ball valves... page 272 Butterfly valves... page 272 Ball check valves...

Valves for building. Y-strainers... page 272 PVC valves Ball valves... page 272 Butterfly valves... page 272 Ball check valves... Valves for building Ball valves PN25/20... page 262 PN30/20...pages 262 to 263 PN40/30 - Lead-free brass... page 264 Valve for gas... page 265 Stem extension valves... page 265 3 way valves... page 265

More information

Rate B standard. Rate A Rate A option. max +260 C/ min -40 C

Rate B standard. Rate A Rate A option. max +260 C/ min -40 C of carbon steel 315 -series C ont R o L Description Edition 30-03-2015 The welded butterfly valve 315 is used for example in district heating, district cooling and industry. It can be used as an on-off

More information

611, 671. Diaphragm Valve, Metal

611, 671. Diaphragm Valve, Metal Distributed by: Tel: 905.677.9000 Toll Free: 1.0.486.7863 www.tricanada.com Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic

More information

ORIFICE PLATE flow meters

ORIFICE PLATE flow meters ORIFICE PLATE flow meters 1 Differential pressure and pressure loss When a throttle element is interposed in a closed passage of fluid in piping, a difference is produced between the pressure upstream

More information

Quick Connect Couplings Series ES single shut-off - The ORIGINAL DN 7.2

Quick Connect Couplings Series ES single shut-off - The ORIGINAL DN 7.2 Quick Connect Coupings Series ES singe shut-off - The ORIGINAL Quick Connect Coupings of brass or brass MS 58 nicke-pate New hose barb for safe fit of hose an easy assemby Seeve esign protects the couping

More information

These PFA and PTFE lined products offer a reliable solution in hazardous applications

These PFA and PTFE lined products offer a reliable solution in hazardous applications These PFA and PTFE lined products offer a reliable solution in hazardous applications Features Check valves Heavy duty body in ductile iron GGG4.3 (ASTM A-395). Heavy duty PFA or PTFE lining. Borosilicate

More information

NELES FLANGED FULL BORE MBV BALL VALVE, SERIES M1 FOR PN RATINGS

NELES FLANGED FULL BORE MBV BALL VALVE, SERIES M1 FOR PN RATINGS NELES FLANGED FULL BORE BV BALL VALVE, SERIES 1 FOR PN RAINGS etso's Neles modular ball valve series 1, offers optimized performance of pulp and paper applications. Series, incorporates etso's leading

More information

Constant Flow Valves. Specifications PVC: 1/2", 3/4", 1", 2", 3", 4" PVC PVC Flanged ANSI EPDM Stainless Steel 304 with ETFE Coating º F

Constant Flow Valves. Specifications PVC: 1/2, 3/4, 1, 2, 3, 4 PVC PVC Flanged ANSI EPDM Stainless Steel 304 with ETFE Coating º F Sizes: Body: Bonnet: Models: Seals: s: Temperature: Specifications : ", ", 1", 2", 3", 4" Flanged ANSI EPDM Stainless Steel 304 with ETFE Coating 30 1º F Constant Flow Valves Standard Features (Sizes "

More information

Electric Actuators. Series 94 Electric Actuators

Electric Actuators. Series 94 Electric Actuators SERIES 9 SERIES 9 Series 9 Eecric cuaors Sandard Feaures (Sizes /" 3") Brushess, capacior-run moors (C modes) Inegra herma overoad proecion wih auorese (C modes) Permaneny ubricaed gear rain Duy cyce 00%

More information

SBP Butterfly Valves 1" 42"

SBP Butterfly Valves 1 42 PRODUCT MANUAL PM SBP: Product Info 51 Butterfly Valves, plastomer-lined PM 51 M.00 us SBP Butterfly Valves 1" 42" are ideally suited for Shut-off, Flow Control and Throttling of corrosive and abrasive

More information

Evans Ball Valves. Evans. Process Cooling Water System

Evans Ball Valves. Evans. Process Cooling Water System Ball Valves System PW Series Full Port Design 1/4-6 Range Integrated Valve Assemblies Spool anifolds up to 24 (7m) engths One-piece ANSI 150lb Flange Optional 100% Pressure Tested PW Series In today s

More information

AIL CAST STEEL GATE, GLOBE & CHECK VALVES. ASME Class mm mm (2-48 ) API 600 API 603 AUDCO INDIA LIMITED ASME B16.

AIL CAST STEEL GATE, GLOBE & CHECK VALVES. ASME Class mm mm (2-48 ) API 600 API 603 AUDCO INDIA LIMITED ASME B16. AIL CAST STEEL GATE, GLOBE & CHECK VALVES ASME Cass 150-2500 50mm - 1200mm (2-48 ) API 600 API 603 ASME B16.34 AUDCO INDIA LIMITED Gate/Gobe/Check Introduction Vaves to API 600 The AIL Cast Stee Gate,

More information

SINGLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.6

SINGLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.6 Application Single-eccentric butterfly valves are industrial valves, which are designed to fully open or close a passage of the working medium flowing through a pipeline. They can also be used for flow-control

More information

SINGLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.6

SINGLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.6 Application Single-eccentric butterfly valves are industrial valves, which are designed to fully open or close a passage of the working medium flowing through a pipeline. They can also be used for flow-control

More information

pvc-c manual valves inch sizes manual valves inch sizes Spears True Union 2000 Industrial Ball Valve

pvc-c manual valves inch sizes manual valves inch sizes Spears True Union 2000 Industrial Ball Valve pvc-c Spears True Union 2000 Industrial Ball Valve Description: In-line double union ball valve with lockable handle Maximum Fluid Pressure at 20 C: Sizes 1 /2 to 2-16 bar; sizes 2 1 /2 to 6-10 bar All

More information

Pipe Nipples / Solvent Cement / Pipe Clips 11. Diaphragm Valves / Knife Gate Valves 21

Pipe Nipples / Solvent Cement / Pipe Clips 11. Diaphragm Valves / Knife Gate Valves 21 TABLE OF CONTENTS Pipe Sizing 1 Pipe 2 Tee s 3 Elbows 4 Couplings 5 Adaptors, Caps & Plugs 6 Unions 7 Reducer Bushing 8 Wye s / Clamp on Saddles 9 Flanges 10 Pipe Nipples / Solvent Cement / Pipe Clips

More information

Type Electrically Actuated Ball Valve

Type Electrically Actuated Ball Valve Electrically Actuated Ball Valve Type 179-184 General Size: ⅜ 4 Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seat: PTFE Seals: EPDM, FPM End Connection: Solvent cement socket, threaded,

More information

Milroyal C. PD 3661 Effective 6/2009. MilRoyal C

Milroyal C. PD 3661 Effective 6/2009. MilRoyal C Milroyal C Milroyal C Pumps Milroyal C DUPLEX with HPD Liquid End GENERAL SPECIFICATIONS Drive Polar crank design all moving parts sub merged in oil. Front end scavenging The plunger always set to top

More information

YARWAY FLOAT TRAPS SERIES 23000, 26000, 33000

YARWAY FLOAT TRAPS SERIES 23000, 26000, 33000 SERIES 23000, 26000, 33000 Series 23000 and 26000 for steam-using equipment, supporting high-volume drain discharge. Series 33000 for air and gas, achieving energy conservation through rapid drain discharge.

More information

2 way ball valve M1 with pneumatic actuator

2 way ball valve M1 with pneumatic actuator Praher Plastics Austria GmbH DB/EN/DEEN/14/03/335 Subject to change without prior notice!! General: Valve body: Sealing material: Ball seating joint: Dimensions: PVC-U EPDM / FPM PTFE DN10 DN50 d16 d63

More information

Type 375. True Union Ball Valve

Type 375. True Union Ball Valve True Union Ball Valve Type 3 General Size: ⅜ 4 Material: PVC, CORZAN CPVC, or PPn Seat: PTFE Seals: EPDM or FPM End Connection: Solvent cement socket, threaded, flanged, PPro-Seal electrofusion socket

More information

R-101-E GLASS TUBE FLOWMETER BEST COST PERFORMANCE GENERAL STANDARD SPECIFICTION. Max. fluid press. MPa Meter size.

R-101-E GLASS TUBE FLOWMETER BEST COST PERFORMANCE GENERAL STANDARD SPECIFICTION. Max. fluid press. MPa Meter size. BEST COST PERFORMANCE R-1-E GLASS TUBE FLOWMETER GENERAL R-1-E is a glass tube type variable area flowmeter. The flow rate is indicated by the position of float and the graduation engraved on the glass

More information

The series 10 butterfly valves has been developed for a large number of applications throughout process industries. The

The series 10 butterfly valves has been developed for a large number of applications throughout process industries. The Technical Bulletin B-100 Features Series 10 High Performance Feature Butterfly valves For Rating JIS 20K General : The series 10 butterfly valves has been developed for a large number of applications throughout

More information

Swagelok Alternative Fuel Ser vice (AFS) Ball Valves

Swagelok Alternative Fuel Ser vice (AFS) Ball Valves www.swagelok.com Swagelok Alternative Fuel Ser vice (AFS) Ball Valves For High-Pressure, High-Flow Applications Swagelok AFS Ball Valves Working pressures up to 6000 psig (413 bar) Flow coefficients (C

More information

Technische Dokumentation Technical Documentation

Technische Dokumentation Technical Documentation Technische Dokumentation Technical Documentation XOMOX Fully Lined Check Valves Dok. Nr.: tdb_check_gb XOMOX International GmbH & Co. Von-Behring-Straße 15 D-88131 Lindau / Deutschland Januar 2008 Table

More information