MGF Thread Milling Tools
|
|
|
- Buddy Gyles Grant
- 6 years ago
- Views:
Transcription
1 MGF Thread Milling Tools Chamfering and hread milling righ from M2 Spiral flued solid carbide ools wih profile correcion and rear chamfer. Diameer range 2-20 mm This offers he following main advanages compared o he convenional mehods of apping and roll form apping: One and he same ool for differen olerances One and he same ool for differen diameers > wih same pich One and he same ool for blind and hrough holes One and he same ool for differen maerials Exac and repeaable chamfer and hread deph No chip roo remaining in he hread Sep drill can be replaced wih sandard wis drill High speed cuing (HSC) possible 14
2 Gewindefräser MGF MGF Thread Milling Tools 1 MGF Page Thread engagemens for MGF M-MGF for meric ISO hread DIN MF-MGF for meric fine ISO hread DIN UNC-MGF for UNC hread ANSI B UNF-MGF for UNF hread ANSI B NPT(F)-MGF for NPT-/NPTF hread o ANSI B G-MGF M-MGF XS MF-MGF XS G-MGF XS M-MGF XH MF-MGF XH for Whiworh pipe hread DIN EN ISO 228 and DIN EN (previously DIN 2999) for meric ISO hread DIN 13; for seel machining from 900 N/mm 2 ensile srengh for meric fine ISO hread DIN 13; for seel machining M900 N/mm 2 ensile srengh for Whiworh pipe hread DIN EN ISO 228 and DIN EN (previously DIN 2999); for seel machining M900 N/mm 2 ensile srengh for meric ISO hread DIN 13; for hard machining of maerials wih hardness M45HRC for meric fine ISO hread DIN 13; for hard machining of maerials wih hardness M45HRC CNC programs can be configured online a hp://p.komegroup.com or can be obained on reques from el.: +49 (0)
3 Thread engagemens for MGF For meric ISO hread DIN 13, for meric fine ISO hread DIN 13 and for UNC hread ANSI B1.1. BT TL = Min. drill deph = Full hread lengh D1 D D TL BT M 1,5 D 2,0 D 2,5 D D1 BT D3.1 TL D1 BT D3.1 TL D1 BT D3.1 TL M2 1,60 3,36 2,30 3,06 1,60 4,56 2,30 4,26 1,60 M3 2,50 5,16 3,30 4,77 2,50 6,66 3,30 6,27 2,50 M4 3,30 6,48 4,30 5,91 3,30 8,58 4,30 8,01 3,30 10,68 4,30 10,11 M5 4,20 8,22 5,30 7,52 4,20 10,60 5,30 9,92 4,20 13,00 5,30 12,32 M6 5,00 10,21 6,30 9,36 5,00 13,21 6,30 12,36 5,00 16,21 6,30 15,36 M8 6,75 14,01 8,30 12,89 6,75 17,76 8,30 16,64 6,75 21,51 8,30 20,39 M10 8,50 16,81 10,30 15,42 8,50 21,31 10,30 19,92 8,50 27,31 10,30 25,92 M12 10,30 19,65 12,30 17,95 10,30 26,60 12,30 24,96 10,30 31,85 12,30 30,21 M14 12,00 24,40 14,30 22,50 12,00 30,40 14,30 28,50 12,00 38,40 14,30 36,50 M16 14,00 26,42 16,30 24,47 14,00 34,42 16,30 32,47 14,00 42,42 16,30 40,47 M20 17,50 35,55 20,30 33,00 17,50 45,55 20,30 43,00 17,50 53,05 20,30 50,50 MF 1,5 D 2,0 D 2,5 D D1 BT D3.1 TL D1 BT D3.1 TL D1 BT D3.1 TL M4 0,5 3,50 6,73 4,30 6,21 3,50 8,73 4,30 8,21 3,50 10,73 4,30 10,21 M5 0,5 4,50 8,30 5,30 7,70 4,50 10,80 5,30 10,20 4,50 13,30 5,30 12,70 M6 0,75 5,25 10,03 6,30 9,20 5,25 13,03 6,30 12,20 5,25 16,03 6,30 15,20 M8 1 7,00 13,34 8,30 12,26 7,00 17,34 8,30 16,26 7,00 21,34 8,30 20,26 M10 1 9,00 16,46 10,30 15,17 9,00 21,46 10,30 20,17 9,00 26,46 10,30 25,17 M12 1,5 10,50 19,92 12,30 18,33 10,50 25,92 12,30 24,33 10,50 31,92 12,30 30,33 M ,00 19,57 12,30 18,08 11,00 25,57 12,30 24,08 11,00 31,57 12,30 30,08 M14 1,5 12,50 23,05 14,30 21,23 12,50 30,55 14,30 28,73 12,50 38,05 14,30 36,23 M16 1,5 14,50 26,07 16,30 24,21 14,50 33,57 16,30 31,71 14,50 42,57 16,30 40,70 UNC 1,5 D 2,0 D 2,5 D D1 BT D3.1 TL D1 BT D3.1 TL D1 BT D3.1 TL 1/4-20 UNC 5,08 11,65 6,65 10,62 5,08 15,46 6,65 14,40 5,08 16,73 6,65 15,67 5/16-18 UNC 6,53 12,93 8,24 11,80 6,53 17,14 8,24 16,01 6,53 21,37 8,24 20,20 3/8-16 UNC 7,94 16,20 9,83 14,81 7,94 20,92 9,83 19,53 7,94 25,68 9,83 24,30 1/2-13 UNC 10,75 21,97 13,00 20,00 10,75 27,83 13,00 25,81 10,75 33,70 13,00 31,68 We reserve he righ o make echnical aleraions 16
4 Thread engagemens for MGF For UNF hread ANSI B1.1, for NPT/NPTF hread ANSI B2.1 and for Whiworh pipe hread DIN EN ISO 228 and DIN EN (previously DIN 2999) BT TL = Min. drill deph = Full hread lengh 1 MGF D1 D D TL BT UNF 1,5 D 2,0 D 2,5 D D1 BT D3.1 TL D1 BT D3.1 TL D1 BT D3.1 TL 1/4-28 UNF 5,44 11,20 6,65 10,20 5,44 14,84 6,65 13,85 5,44 17,56 6,65 16,57 5/16-24 UNF 6,88 13,00 8,24 11,90 6,88 17,23 8,24 16,18 6,88 21,47 8,24 20,40 3/8-24 UNF 8,47 15,16 9,83 14,09 8,47 20,42 9,83 19,35 8,47 25,70 9,83 24,60 7/16-20 UNF 9,84 18,05 11,41 16,90 9,84 23,13 11,41 21,99 9,84 29,48 11,41 28,30 1/2-20 UNF 11,43 21,01 13,00 19,10 11,43 27,36 13,00 25,50 11,43 33,71 13,00 31,80 NPT Sandard lengh D1 BT D3.1 TL 1/16-27 NPT 6,15 11,36 8,70 9,00 1/8-27 NPT 8,43 11,36 11,10 9,00 1/4-18 NPT 11,13 16,77 14,50 13,50 3/8-18 NPT 14,27 16,77 17,90 13,50 NPTF Sandard lengh D1 BT D3.1 TL 1/16-27 NPTF 6,10 11,36 8,70 9,00 1/8-27 NPTF 8,40 11,36 11,10 9,00 1/4-18 NPTF 11,00 16,77 14,50 13,50 3/8-18 NPTF 14,50 16,77 17,90 13,50 G 1,5 D 2,0 D 2,5 D D1 BT D3.1 TL D1 BT D3.1 TL D1 BT D3.1 TL G1/8-28 8,82 15,81 10,03 14,67 8,82 21,25 10,03 20,11 8,82 25,84 10,03 24,70 G1/ ,82 21,74 13,46 20,37 11,82 28,43 13,46 27,06 11,82 35,18 13,46 33,80 G3/ ,32 27,22 16,96 25,60 15,32 35,24 16,96 33,62 15,32 43,26 16,96 41,60 We reserve he righ o make echnical aleraions Please see noe on page
5 M Thread Milling Tool MGF wih rear chamfer, 1.5 D; 2.0 D and 2.5 D For meric ISO hread DIN 13 From shank Ø 8 mm wih inernal coolan supply Cuing maerial: solid carbide M-MGF 1,5 D Z M2 0,40 1,60 47,8 3, ,5 2,3 1, M3 0,50 2,50 47,5 5, ,4 3,3 2, M4 0,70 3,30 46,9 6, ,5 4,3 3, M5 0,80 4,20 52,6 8, ,5 5,3 3, M6 1,00 5,00 59,0 10, ,6 6,3 4, M8 1,25 6,75 70,3 14, ,0 8,3 6, M10 1,50 8,50 74,5 16, ,0 10,3 7, M12 1,75 10,25 82,0 19, ,5 12,3 9, M14 2,00 12,00 96,0 24, ,5 14,3 10, M16 2,00 14,00 94,0 26, ,5 16,3 12, M20 2,50 17,50 117,0 35, ,0 20,3 15, M-MGF 2,0 D Z M2 0,40 1,60 49,0 4, ,5 2,3 1, M3 0,50 2,50 49,0 6, ,4 3,3 2, M4 0,70 3,30 49,0 8, ,5 4,3 3, M5 0,80 4,20 55,0 10, ,5 5,3 3, M6 1,00 5,00 62,0 13, ,6 6,3 4, M8 1,25 6,75 74,0 17, ,0 8,3 6, M10 1,50 8,50 79,0 21, ,0 10,3 7, M12 1,75 10,25 89,0 26, ,5 12,3 9, M14 2,00 12,00 102,0 30, ,5 14,3 10, M16 2,00 14,00 102,0 34, ,5 16,3 12, M20 2,50 17,50 127,0 45, ,0 20,3 15, M-MGF 2,5 D 18 Z M4 0,70 3,30 49,0 10, ,5 4,3 3,14 3 M5 0,80 4,20 55,0 13, ,5 5,3 3, M6 1,00 5,00 62,0 16, ,6 6,3 4, M8 1,25 6,75 74,0 21, ,0 8,3 6, M10 1,50 8,50 79,0 27, ,0 10,3 7, M12 1,75 10,25 89,0 31, ,5 12,3 9, M14 2,00 12,00 102,0 38, ,5 14,3 10,92 4 M16 2,00 14,00 102,0 42, ,5 16,3 12,83 4
6 MF Thread Milling Tool MGF wih rear chamfer, 1.5 D D 1 MGF For meric fine ISO hread DIN 13 From shank Ø 8 mm wih inernal coolan supply Cuing maerial: solid carbide MF-MGF 1,5 D Z M4 0,5 0,50 3,50 47,0 6, ,5 4,3 3,14 3 M5 0,5 0,50 4,50 52,5 8, ,5 5,3 3,95 3 M6 0,75 0,75 5,25 59,0 10, ,6 6,3 4,68 3 M8 1 1,00 7,00 70,0 13, ,0 8,3 6, M10 1 1,00 9,00 74,0 16, ,0 10,3 7, M12 1 1,00 11,00 83,0 19, ,5 12,3 9, M12 1,5 1,50 10,50 83,0 19, ,5 12,3 9, M14 1,5 1,50 12,50 94,5 23, ,5 14,3 10, M16 1,5 1,50 14,50 94,5 26, ,5 16,3 12, MF-MGF 2,0 D Z M4 0,5 0,50 3,50 49,0 8, ,5 4,3 3,14 3 M5 0,5 0,50 4,50 55,0 10, ,5 5,3 3, M6 0,75 0,75 5,25 62,0 13, ,6 6,3 4, M8 1 1,00 7,00 74,0 17, ,0 8,3 6, M10 1 1,00 9,00 79,0 21, ,0 10,3 7, M12 1 1,00 11,00 89,0 25, ,5 12,3 9, M12 1,5 1,50 10,50 89,0 25, ,5 12,3 9, M14 1,5 1,50 12,50 102,0 30, ,5 14,3 10, M16 1,5 1,50 14,50 102,0 33, ,5 16,3 12,
7 UNC wih rear chamfer, 1.5 D D For UNC hread ANSI B1.1 Thread Milling Tool MGF From shank Ø 8 mm wih inernal coolan supply Cuing maerial: solid carbide UNC-MGF 1,5 D Z 1/4-20 UNC 1,270 5,08 58,2 11, ,8 6,7 4, /16-18 UNC 1,411 6,53 69,8 12, ,0 8,2 6, /8-16 UNC 1,588 7,94 74,2 16, ,0 9,8 7, /2-13 UNC 1,954 10,75 83,1 22, ,5 13,0 9, UNC-MGF 2,0 D Z 1/4-20 UNC 1,270 5,08 62,0 15, ,8 6,7 4, /16-18 UNC 1,411 6,53 74,0 17, ,0 8,2 6, /8-16 UNC 1,588 7,94 79,0 20, ,0 9,8 7, /2-13 UNC 1,954 10,75 89,0 27, ,5 13,0 9,
8 UNF wih rear chamfer, 1.5 D D Thread Milling Tool MGF 1 MGF For UNF hread ANSI B1.1 From shank Ø 8 mm wih inernal coolan supply Cuing maerial: solid carbide UNF-MGF 1,5 D Z 1/4-28 UNF 0,907 5,44 58,4 11, ,8 6,65 4, /16-24 UNF 1,058 6,88 69,8 13, ,0 8,24 6, /8-24 UNF 1,058 8,47 73,7 15, ,0 9,83 7, /16-20 UNF 1,270 9,84 82,9 18, ,5 11,41 9, /2-20 UNF 1,270 11,43 82,7 21, ,5 13,00 9, UNF-MGF 2,0 D Z 1/4-28 UNF 0,907 5,44 62,0 14, ,8 6,65 4, /16-24 UNF 1,058 6,88 74,0 17, ,0 8,24 6, /8-24 UNF 1,058 8,47 79,0 20, ,0 9,83 7, /16-20 UNF 1,270 9,84 88,0 23, ,5 11,41 9, /2-20 UNF 1,270 11,43 89,0 27, ,5 13,00 9,
9 NPT/NPTF wih rear chamfer Thread Milling Tool MGF For NPT-/NPTF hread ANSI B2.1 Thread reach in line wih requiremens under sandard From shank Ø 12 mm wih inernal coolan supply Cuing maerial: solid carbide l2.3 < NPT-MGF l2.3 Z 1/16-27 NPT 0,941 6,15 64,0 9,7 11, , /8-27 NPT 0,941 8,50 70,0 9,7 11, , /4-18 NPT 1,411 11,0 80,0 14,81 16, , /8-18 NPT 1,411 14,5 81,0 14,81 16, , For hreads ½ 14 NPT and bigger, use JEL TOMILL GS Thread Milling Tool NPTF-MGF l2.3 Z 1/16-27 NPTF 0,941 6,10 64,0 9,7 11, ,7 3 1/8-27 NPTF 0,941 8,45 70,0 9,7 11, , /4-18 NPTF 1,411 10,90 80,0 14,81 16, , /8-18 NPTF 1,411 14,30 81,0 14,81 16, , For hreads ½ 14 NPTF and bigger, use JEL TOMILL GS Thread Milling Tool 22
10 G Thread Milling Tool MGF wih rear chamfer, 1.5 D D 1 MGF For Whiworh pipe hread DIN EN ISO 228 and DIN EN (previously DIN 2999) From shank Ø 12 mm wih inernal coolan supply Cuing maerial: solid carbide G-MGF 1,5 D Z G1/8-28 0,907 8,82 73,6 15, ,0 10,0 7, G1/4-19 1,337 11,82 94,0 21, ,5 13,5 10, G3/8-19 1,337 15,32 94,0 27, ,5 17,0 13, G-MGF 2,0 D Z G1/8-28 0,907 8,82 79,0 21, ,0 10,0 7, G1/4-19 1,337 11,82 100,5 28, ,5 13,5 10, G3/8-19 1,337 15,32 102,0 35, ,5 17,0 13,
11 M Thread Milling Tool MGF XS wih rear chamfer, 1.5 D D For meric ISO hread DIN 13 For machining seel M900 N/mm 2 ensile srengh From shank Ø 8 mm wih inernal coolan supply Cuing maerial: solid carbide M-MGF XS 1,5 D TiCN - HE TiCN - HA Z M4 0,70 3,30 46,9 6, ,5 4,3 3, M5 0,80 4,20 52,6 8, ,5 5,3 3, M6 1,00 5,00 59,0 10, ,6 6,3 4, M8 1,25 6,75 70,3 14, ,0 8,3 6, M10 1,50 8,50 74,5 16, ,0 10,3 7, M12 1,75 10,25 82,0 19, ,5 12,3 9, M14 2,00 12,00 96,0 24, ,5 14,3 10, M16 2,00 14,00 94,0 26, ,5 16,3 12, M20 2,50 17,50 117,0 35, ,0 20,3 15, M-MGF XS 2,0 D TiCN - HE TiCN - HA Z M4 0,70 3,30 49,0 8, ,5 4,3 3, M5 0,80 4,20 55,0 10, ,5 5,3 3, M6 1,00 5,00 62,0 13, ,6 6,3 4, M8 1,25 6,75 74,0 17, ,0 8,3 6, M10 1,50 8,50 79,0 21, ,0 10,3 7, M12 1,75 10,25 89,0 26, ,5 12,3 9, M14 2,00 12,00 102,0 30, ,5 14,3 10, M16 2,00 14,00 102,0 34, ,5 16,3 12, M20 2,50 17,50 127,0 45, ,0 20,3 15,
12 MF Thread Milling Tool MGF XS wih rear chamfer, 1.5 D D 1 MGF For meric fine ISO hread DIN 13 For machining seel M900 N/mm 2 ensile srengh From shank Ø 8 mm wih inernal coolan supply Cuing maerial: solid carbide MF-MGF XS 1,5 D TiCN - HE TiCN - HA Z M8 1 1,00 7,00 70,0 13, ,0 8,3 6, M10 1 1,00 9,00 74,0 16, ,0 10,3 7, M12 1,5 1,50 10,50 83,0 19, ,5 12,3 9, M12 1 1,00 11,00 83,0 19, ,5 12,3 9,38 3 M14 1,5 1,50 12,50 94,5 23, ,5 14,3 10, M16 1,5 1,50 14,50 94,5 26, ,5 16,3 12, MF-MGF XS 2,0 D TiCN - HE TiCN - HA Z M8 1 1,00 7,00 74,0 17, ,0 8,3 6, M10 1 1,00 9,00 79,0 21, ,0 10,3 7, M12 1,5 1,50 10,50 89,0 25, ,5 12,3 9, M12 1 1,00 11,00 89,0 25, ,5 12,3 9,38 3 M14 1,5 1,50 12,50 102,0 30, ,5 14,3 10, M16 1,5 1,50 14,50 102,0 33, ,5 16,3 12,
13 G Thread Milling Tool MGF XS wih rear chamfer, 1.5 D D For Whiworh pipe hread DIN EN ISO 228 and DIN EN (previously DIN 2999) For machining seel M900 N/mm 2 ensile srengh From shank Ø 8 mm wih inernal coolan supply Cuing maerial: solid carbide G-MGF XS 1,5 D TiCN - HE TiCN - HA Z G1/8-28 0,907 8,82 73,6 15, ,0 10,0 7, G1/4-19 1,337 11,82 95,3 21, ,5 13,5 10, G-MGF XS 2,0 D TiCN - HE TiCN - HA Z G1/8-28 0,907 8,82 79,0 21, ,0 10,0 7, G1/4-19 1,337 11,82 102,0 28, ,5 13,5 10,
14 M Thread Milling Tool MGF XH wih rear chamfer, 1.5 D 1 MGF For meric ISO hread DIN 13 For hard machining of maerials wih hardness M45 HRC Tools wihou inernal coolan supply Cuing maerial: solid carbide M-MGF XH 1,5 D TiAlN - HE TiAlN - HA Z M4 0,70 3,30 47,0 6, ,5 4,3 3, M5 0,80 4,20 52,0 8, ,5 5,3 3, M6 1,00 5,00 59,0 10, ,6 6,3 4, M8 1,25 6,75 70,0 14, ,0 8,3 6, M10 1,50 8,50 74,0 16, ,0 10,3 7, M12 1,75 10,25 82,0 19, ,5 12,3 9, MF wih rear chamfer, 1.5 D Thread Milling Tool MGF XH For meric fine ISO hread DIN 13 For hard machining of maerials wih hardness M45 HRC Tools wihou inernal coolan supply Cuing maerial: solid carbide MF-MGF XH 1,5 D TiAlN - HE TiAlN - HA Z M12 1,5 1,50 10,50 82,0 19, ,5 12,3 9, M14 1,5 1,50 12,50 94,0 23, ,5 14,3 10, M16 1,5 1,50 14,50 94,0 26, ,5 16,3 12,
Thread Milling Tool GWF
Thread Milling Tool GWF Thread milling >Ø20 mm Spiral flued solid carbide ools, some wih face cuer and fron chamfer This offers he following main advanages compared o he convenional mehods of apping and
GROOVING INSERTS. Thread Turning Index. Back to Main Index
Grooving > Insers GOOVING INSETS Thread Turning Index Back o Main Index VADEX Ordering Code Sysem...Page 149 Exernal - DIN 471 eaining ing Grooves for Shafs...Page 150 Inernal - DIN 472 eaining ing Grooves
Thread Milling. Tool Systems.
www.mimaic.de 2017 The affordable sysem wih high performance allows hreading and / or circlip grooving in high precision. The polygonal connecion of inser and milling body improves he efficiency and precision
Solid Carbide Thread Milling
Solid Carbide Thread Milling 07 - '06 Contents Page GRADES OF COMBIDEX SOLID CARBIDE THREAD MILLS Micrograin 4 Order Example 4 ISO - Metric Thread 6O 5 ISO - Metric Fine Pitch Thread 6O 5 ISO - Metric
microtes Precision Metrology in Action
microes Prodej a servis měřící echniky. Tel: 776 182 329, 739 070 339 Srahovice 159, 747 24 Chuchelná e-mail: info@microes.cz hp: www.microes.cz Exclusively available from specialized dealers Precision
Solid Carbide Thread Milling
Ordering Code Standard Fine D D L L T Height Pitch/mm Solid Carbide Thread Milling Contents Information Page - ISO Metric & External Thread Page - 2 ISO Metric Pitch & Fine Pinch External Thread 60º Page
PRODUCT DEsCRIPTION. optibelt ZR TIMINg belts IsO 5296
opi ZR TIMINg belts srucure Bel layer ension cord ooh Fabric Fabric In order o obain a low level of wear on he running surfaces as well as achieving a high level of oohear srengh, a ough, wear resisan
Flow Monitor FS10. Description FS10-.. Connection diagram FS10. Ordering information. Electrical connection. Flow rate ranges FS 10
Flow Monior FS0 Descripion Compac single poin flow monior, MIN or MAX monioring opions, suiable for waer, oil, air or media wih similar hermal conduciviies. Wih screw-in or plug-in ype monioring head for
Flow Monitor FS10. Description FS10-.. Connection diagram FS10. Ordering information. Electrical connection. Flow rate ranges
Flow Monior FS0 Descripion Compac single poin flow monior, MIN or MAX monioring opions, suiable for waer, oil, air or media wih similar hermal conduciviies. Wih screw-in or plug-in ype monioring head for
Index. General Information 5-6. Technical Information. 1-pole terminal boards. 2-pole terminal boards. 3-pole terminal boards. 4-pole terminal boards
Terminal Blocks Index Page General Informaion Technical Informaion pole erminal boards pole erminal boards 3pole erminal boards pole erminal boards pole erminal boards ype KL...K ype K M (acc. o DIN )
Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving.
Edition 2015-10 Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving. The main product is the QuadCut, which on
2017 NORTH AMERICA TAPS EDITION
2017 NORTH AMERICA TAPS EDITION PRIMED FOR PRODUCTIVITY THE MOST POWERFUL TAPS IN THE BUSINESS PROUDLY BEAR OUR NAME. WIDIA-GTD delivers a complete range of solid carbide, high performance, multipurpose,
LINEAR BAR GRILLS. Supply, Return, Extract Linear bar grilles and registers
Supply, Reurn, Exrac Linear bar grilles and regisers LG-1 F W B N B B TIM model LG-1 is a reurn air grille wih fixed profiled linear blades of 0 wih 3 mm hickness, se a 12.5 mm or 6 mm pich. F = Frame
Bluechip Tooling td Tel Table of Content Type Page range Metric M with chamfer M3 - M20 M5 - M Metric
Bluechip Tooling td info@bluechiptooling.co.uk Tel 024 7647 4819 Circular Milling Cutters in Solid Carbide Version -Coating Uncoated Types Best Prices Best Endurance from Ø 4 Short processing times by
Threading tools to JIS standard
Taps for metric, metric-fine, UNC, UNF and PT threads For universal applications, stainless steel, cast iron and aluminium as well as for hard machining -PM high-performance taps with new TiAlN-coating
ThreadMill. For Thread Milling
ThreadMill For Thread Milling Scandinavian Tool Systems Scandinavian Tool Systems AB Our business idea is to offer the best rigid threading system to our customer and to be in the front line of cutting
CMT Vertical Mill-Thread
CMT Vertical Mill-Thread Carmex presents a new family of vertical thread milling indexable inserts and toolholders to perform a wide variety of threads. Advantages of CMT - Vertical Mill-Thread Ground
Carbide Drills When productivity matters - Stub 1. to Long 1
CARBIDE DRILLS Carbide Drills When productivity matters - Stub 1 to Long 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings Drill
WÜPLAST WÜPLAST. WÜRTH Industrie Service. Screws for thermoplastics. Screws for thermoplastics DE EN
WÜPLAST Screws for hermoplasics WÜRTH Indusrie Service DE EN WÜPLAST Würh Indusrie Service GmbH & Co. KG Indusriepark Würh, Drillberg 97980 Bad Mergenheim T +9 79 31 91-0 F +9 79 31 91-000 wueplas@wuerh-indusrie.com
... MILITARY SPECIFICATION SHEET CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, MOUNTING HARDWARE
.... e.,,.., ML-C-8353/5D 30 Januu 987 ML-c-8353/5c 20 November 986 MLTARY SPECFCATON SHEET CONNECTORS, ELECTRCAL, RECTANGULAR, MCROMNATURE, MOUNTNG HARDWARE This specificaion is approved for use by all
MOTORISED VALVES. stainless steel body threaded ports, 3/8-1/2-3/4. Translucent polyamide (PA) PA66, GB 30% (ball fibre reinforced)
MOTORISE VALVES sainless seel body hreaded pors, /8 - / - / / Series 90 FEATURES High f due o angled sea design Ani-waerhammer design (fluid enry under he disc) Acuaor roaable hrough 60 Mainaining posiion
2/2 MOTORISED VALVES. stainless steel body threaded ports, 3/8-1/2-3/4. Series
MOTORISE VALVES sainless seel body hreaded pors, /8 / / / Series 9 FEATURES High flow due o angled sea design Aniwaerhammer design (fluid enry under he disc) Acuaor roaable hrough 6 In opion closing of
Cutting and Turning Tools
Cuing and Turning Toos Our Company Specia Cuing Toos Circuar- and Thread Miing Toos Cuing and Turning Toos Driven Toohoders for CNC Machining Ceners Driven Toohoders for CNC Turning Machines Mui-Spinde
Cutting
wist drills Miniature drills Sheet metal drills Core drills Step drills Centring and spot drills aper pin drills Solid carbide drills Solid carbide tapping ools Carbide reversible cutting inserts wist
CI/SfB Xt6. June Tension and Compression Systems. for the Construction Industry
CI/SfB X6 June 2017 Tension and Compression Sysems for he Consrucion Indusry Tension and Compression Sysems High performance in an archiecural design Tension and compression bars are increasingly being
Aluminium and (-2)* aluminium casting alloys *() * emulsion (long-chip) **
System components for installation Standard range of HELICOIL plus manual and machine taps Range of types Recommended guide values Manual Machine tap tap Through hole Blind hole Cutting Cooling All hole
Drilling tools. From page Centring drills NC spot drills. Twist drills HSS, HSS/ Co, solid carbide. From page 10-6
tools entring drills N spot drills From page 10-3 Twist drills HSS, HSS/ o, solid carbide From page 10-6 Step drills one drill bits arbide masonry drill Bit tools From page 10-44 ircle cutters T-A Insert
Slow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING
LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center
CI/SfB. Xt6. July Tension and Compression Systems for the Construction Industry
CI/SfB July 2010 X6 Tension and Compression Sysems for he Consrucion Indusry 2 This brochure is prined on paper produced from 80% recycled pos-consumer fibre and 20% virgin pulp which is sourced from responsibly
HSS Hollow. Structural Sections DIMENSIONS AND SECTION PROPERTIES HSS: TECHNICAL BROCHURE
HSS Hollow Srucural Secions DIMENSIONS AND SETION PROPERTIES HSS: TEHNIAL BROHURE 01 Seel Tube Insiue 516 Waukegan Road, Suie 17 Glenview, IL 6005 TEL: 87.61.1701 FA: 87.660.7981 HSS Manufacuring Mehods
Mill - Thread Inserts and Kits
Mill - Thread s and Kits Mill-Thread tools for threading on CNC milling machines by using helical interpolation programs Advantages of Mill-Thread Tools Same toolholder and insert can produce both right-hand
CI/SfB. Xt6. July Ancon 500 Tension Systems for the Construction Industry
CI/SfB July 2010 X6 Ancon 500 Tension Sysems for he Consrucion Indusry 2 This brochure is prined on paper produced from 80% recycled pos-consumer fibre and 20% virgin pulp which is sourced from responsibly
Super. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY
Super Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY 10th Edition High-tech tools at a super price convincing price-performance-ratio exceptional quality immediate availability customer-friendly service
Product features. only RS. Application-specific features RS. Indication for the RS UNF. 400 C max. 200 C. Lifting points ready for bolting RS RM
Lifting points ready for bolting > WLL in comparison to DIN 580/582 Clear marking of the minimum WLL Large thread and WLL range M, MF, UNC, UNF, 8UN, BSW, G 0.1 t 8 t Product features High-strength octagon
POWER PRICE UNI. powerful UNF METAL. UNCPower. power ful GOLD FOR. powerful TOP GEOMETRIES UNF PERFECT CHOICE VER. perfect thread form.
MADE BY UNIVERSALtaps TOP GEOMETRIES FORM EUNIVERSAL UNIVERSAL TAPS powerful perfect UNF longideal flutes choice tool life PROCESS RELIABLE PERFECT universal power ful UNC-THREAD ISO-METRIC THREADS GUHRING
Solid carbide Twist Drills Overview
Solid carbide Twist Drills Overview Manufacturer ß 000000000000 DIN similar to 899 338 338 338 6539 6539 6539 6539 6539 6539 6539 6539 6539 Counters.cut.Counters.cut. 3 x D 3 x D 3 x D, IKZ 3 x D, IKZ
TKA SERIES Chip-Tight Tube Series
TKA55 Corporae Headquarers U.S. Tsubaki Power Transmission, LLC 301 E. Marquard Drive Wheeling, IL 60090 Tel: (800) 33-7790 Fax: (847) 459-95 www.ussubaki.com Roller Chain Division 81 Main Sree Holyoke,
HSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,
Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks
Special Product Catalogue. T-A Drill Insert System
Special Product Catalogue T-A Drill Insert System T-A Special Products Introduction Allied Maxcut - where special is the norm Tell us your application and we ll make the tool - guaranteed. With more than
MPA BAU Hannover Inspection Report Page 1. Strip Coating Line Babe 1/Babe 2
MPA BAU Hannover Inspecion Repor 082618.1 Page 1 MPA BAU Hannover Inspecion Repor # 082618.1 Su Cusomer: Manufacurer: Order: voesalpine Sahl GmbH voesalpine Sahl GmbH Srip Line Babe 1/Babe 2 9 June 2008/Markus
PRODUCT CATALOG 2010 SİZ K AGRICULTURE HORTICULTURE GREENHOUSE AUTHOR,=(' ',STR,%UTOR &,032R7(R,1 TUR.(Y. %ñ/gñ1/(r '$1,ì0$1/,K
PRODUCT CATALOG 2010 AGRICULTURE HORTICULTURE GREENHOUSE %ñ/gñ1/(r '$1,ì0$1/,K SİZ K İ TR oransal Ð K E as EL zaj pomp do AUTHOR,=(' ',STR,%UTOR &,032R7(R,1 TUR.(Y ( Ferilizer & Chemical injecors are waer
TRASCO ES: 0 backlash coupling
RO : 0 backlash coupling RO is our zero backlash coupling designed o compensae for misalignmen and vibraion dampening for indexing applicaions. he compac design of RO makes i he righ choice for all precise
Product Catalogue 835. Smart Solutions on the Cutting Edge
Product Catalogue 835 Smart Solutions on the Cutting Edge 1 2 The World of WhizCut Smart Solutions on the Cutting Edge Demand on production for small parts around the world is continuously increasing.
Drilling Tools. Drilling Tools
Twist drills Miniature drills Sheet metal drills Spiral countersinks (core drills) Step drills Centre drills Taper pin drills Core drills 1 1.3 1.48 Solid carbide drills Solid carbide tapping Tools Carbide
Chains and Sprockets for the. Bulk Material Handling Industry. » Product catalogue» Special solutions» Accessories» Spare parts.
EN Chains and Srockes for he Bulk Maerial Handling Indusry» Produc caalogue» Secial soluions» Accessories» Sare ars Produc Caalogue 5 Leading OEM comanies in he bulk handling indusry rely on KeenWulf.
140,- 329,- 210,- 329,- 739,- 509,- 350,- 126,- 117,- 126,- 434,- 217,- 488,- 586,- 524,-
AUGUS - OCOBER 07 AUGUS - OCOBER 07 RADIO CONROLLED WALL CLOCK Q O UA Available in Ø0 og Ø0 cm. AA battery operated. P Ø0 cm LI Y 9,- 0 Ø0 cm 09,- 0 DIGIAL INDICAOR DIAL INDICAOR + MAGNEIC SAND Base: 6
BASIC STANDARDS. Core holes for tapping screws and bolts with tapping screw thread DIN Simple, most common tapping thread-joints.
ISO DIN : 797 Core holes for tapping screws and bolts with tapping screw thread DIN 7970 Guidelines for application The essential characteristic of tapping screw thread is its capability of forming chipless
Fine Pitch Cobalt Roughers
ISO 01:08 Fine Pitch Cobalt Roughers Izar - HSCO 8% - M2 -Bright Finish DIN 8 NR-F - ISO 1-30º Helix - Fine Multi-Flute Square End Reg. Length-Roughers 13 7-17 8 19 9-23 22 72-29 2-1 2 - -8-1 38-1 -237
TRASCO ES: 0 Backlash Coupling
RO : 0 Backlash oupling RO RO : 0 backlash coupling he main design funcion of he RO coupling is o ransmi moion while absorbing misalignmens and vibraions wih absolue precision and wihou any backlash whasoever.
HYDRAULIC JACKS & TOOLS
HYDRULIC JCKS & TOOLS 323 Hydraulic jacks & ools Table of conens Page characerisic of his force-oriened hydraulic Hydraulic cylinders, single-acing program is he operaing pressure which can be as high
Info Overview - solid carbide twist drills (I) Drilling Tools
Info Overview - solid carbide twist drills (I) Brand 0 0 0 0 0 0 0 0 Company standard Company standard Company standard Company standard 6539 6539 6539 6539 5 x D Countersink Countersink Article number
THE NEXT GENERATION FOR YOUR APPLICATIONS. QuickTrax EasyTrax UNIFLEX Advanced TKA series
THE NEXT GENERATION FOR YOUR APPLICATIONS QuickTrax EasyTrax UNIFLEX Advanced TKA series A NEW GENERATION THE NEXT GENERATION FOR YOUR APPLICATIONS For more han 60 years Tsubaki KabelSchlepp has been developing
Technical data Hydraulic crawler crane HS 825 HD
Technical daa Hydraulic crawler crane HS 825 HD Dimensions Basic machine wih undercarriage 2860 7360 3000 1700 1060 1000 3260 1200 2335 4610 5480 1080 700 4200 310 R 3900 11245 Operaing weigh The operaing
SPIRAL POINT TAPS for through hole tapping
SPIRAL FLUTE TAPS for blind hole tapping Ideally suitable for blind hole tapping in most materials, particularly aluminium, brass, copper and similar metals. The build up of swarf at the bottom of the
Electronic timer CT-MKE Multifunctional with 1 thyristor
Daa shee Elecronic imer CT-MKE Mulifuncional wih 1 hyrisor The CT-MKE is a mulifuncional elecronic ime relay. I is from he CT-E range. The CT-E range is he economic range of ABB s ime relays and offers
ng Drilli ng eadi Thr Turni ng illi ders ol H Tool r la ders odu hol M Tool
1 HSS drilling Drilling 2 Solid carbide drilling 3 Indexable insert drilling 4 Reaming and Countersinking 5 HSS taps and dies Threading 6 Circular and Thread Milling 8 Turning Tools Turning 9 EcoCut 10
Tap and Drill Bit Selection Guide
148 2012/2013 Power Tools & Accessories Catalog Tap and Drill Bit Selection Guide American Standard and Unified Form Threads Tap drill size is approximately 7% of threaded depth. Thread Nominal Size Standard
Performance requires quality.
131 - With straight shank and square - Left-hand spiral 7-8 - First cut 1/4 of the cutting length (l 2 ) - Accuracy Hand Reamers DIN 26. Not suitable for blind holes. d 1 l 2 l 1 d 2 131 2, 25 5 1,6 21
1. TAPS AND SCREW-PLATES ASCO machine Tap for horology and equipment high-speed steel
1. TAPS AND SCREW-PLATES ASCO machine Tap for horology and equipment high-speed steel SPIROLEX 10 / 3G NIHS For brass, traversing holes, with 2 helicoidal grooves. Helix at left, perfectly countersinking
Edge Preparation. Edge Preparation. Centre Drills...5. Spot Drills (90 & 120 ) Flute Countersinks...8. Edge Preparation
Centre rills...5 Spot rills (90 & 120 )...6 3 Flute Countersinks...8 Carbide Chamfer Countersink...8 Hole Countersinks...9 Carbide rill Mill...9 Single Flute Countersinks...10 Corner Rounding Cutters...11
Special Product Catalogue. T-A Drill Insert System
Special Product Catalogue T-A Drill Insert System T-A Special Products - Application Example Automotive Cylinder Head Application - Cylinder Head Water Jacket Holes Application - Cylinder Head Water Jacket
PIPING. Aluminium pipe for inert gases (5,7 m / 18,7 ft) PAGE 2/ AIRNET Ø (MM / INCH) PARTNUMBER LOT SIZE / ¾" 05
PIPING Aluminium pipe for inert gases (5,7 m / 18,7 ft) 2811 1061 05 20 / ¾" 05 2811 2061 05 25 / 1" 05 PAGE 2/99 2014-11-24 Aluminium pipe for air (2,85 m / 9,4 ft) PIPING 2811 1063 10 20 / ¾" 10 2811
Milling Tools Milling Tools
HSS-keyway milling cutters -finishing cutters -roughing cutters -radius milling cutters Solid carbide -universal end milling cutters - end milling cutters RockTec 52 and 65 - ALU end milling cutters -
Reliability Analysis of Pre-stressed Concrete Continuous Girders Bridge using Incremental Launching Method on Different Codes
Applied Mechanics and Maerials Submied: 2014-08-27 ISSN: 1662-7482, Vol. 681, pp 205-208 Aeped: 2014-08-27 doi:10.4028/www.scienific.ne/amm.681.205 Online: 2014-10-20 2014 Trans Tech Publicaions, Swizerland
Table of contents. Valves 141. Check valves 142. with threaded connector 142. with ISO-flange connection (SAE) 144
Table of contents Valves 4 Check valves 4 with threaded connector 4 with ISO-flange connection (SAE) 44 for manifold mounting 48 Needle valves 5 with threaded connector 5 for manifold mounting 5 for manifold
SuperLinePlus. Edition The fastest service for special tooling! Shortest delivery times for special tools of the highest quality!
Edition 2009 Quotation within 24h! Tool delivery within 3 weeks SuperLinePlus The fastest service for special tooling! Shortest delivery times for special tools of the highest quality! SL Plus solid carbide
Note t Metal glow plugs are always fitted in the 2.7 ltr. common rail engine.
Removing and insalling glow plugs Page 1 of 5 Removing and insalling glow plugs Noe Meal glow plugs are always fied in he 2.7 lr. common rail engine. Two differen ypes of glow plugs are fied in he 3.0
Accessories. Subplates and Connection Plates for Four-Port Directional Valves. Vickers. ISO 4401, 02/03/05/07/08 General Description.
Vickers ccessories Subplates and Connection lates for Four-ort Directional Valves ISO 4401, 02/03/05/07/08 General Description his range of subplates and auxiliary connection plates offers an economical
Clamping Tools
Clamping Tools Drill chuck Tapping chuck/ tapping machines Taper bore tools HSK inserts Tool holder for lathes Tool pre-setter 1 1.3 1.8 Reduction sleeves Spindle Sleeves Ejector Drifts Adapter sleeves
ZVMD Voccum On Load Tap Changer Technical Data
ZVMD Voccum On Load Tap Changer Technical Daa I. ZVMD Technical Specificaions Iem Specificaions Ⅲ000 2 Max. Raed hrough curren () Raed frequency (Hz) 000 50 或 60 3 4 5 Phase and connecing mode Max. Raed
Size d Grain # AC No. mm in mm in mm in. Size. mm mm mm
Accessories SANING ISCS FOR ANGLE AN VERTICAL SANERS AC No. Grain # s mm in mm in P-5 125 5 22.2 7/8 14~60 FG-5PX-1 P-6 150 6 22.2 7/8 14~60 FA-4CHK-3, 3F FA-150K-2, 3 FA-6C-9, 9M P-7 180 7 22.2 7/8 14~60
8 to 10 threads chamfered for easy thread starting in tough material.
TAPER 8 to 10 threads chamfered for easy thread starting in tough material. NC = National Course NF = National Fine PLUG BOTTOM 3 to 5 threads chamfered for general use when tapping to bottom of hole is
TC SERIES THREADMILLING. Threadmilling Insert Nomenclature Chart TI 15 N 8 UN. type of insert. Neutral Positive. insert length
C SERIES HREADMIING hreadmilling Insert Nomenclature Chart I 15 N 8 UN I threadmilling insert insert length type of insert N P 75.750 (19.05) 1 1.000 (25.40) 1.5 1.500 (38.10) hreadmilling Cutter Nomenclature
BALL BEARING UNITS SET SCREW TYPE PILLOW BLOCKS CAST HOUSING UCP2 SET SCREW TYPE FLANGED UNITS CAST HOUSING UCF2
ERIG UIT ET CREW TYPE PIOW OCK CT OUIG UCP haf Diameer 90 8 / 3 / ET CREW TYPE FGED UIT CT OUIG UCF haf Diameer 90 88 UCF / 3 / haf Diameer 90 94 / 3 / 76 77 . COTRUCTIO The K bearing uni is a combinaion
Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides -
CARBIDE ENDMILLS Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides - Various shank styles to suit your needs
THE CALCULUS OF LPG TOROIDAL FUEL TANK SCREWS
The 3 rd Inernaional Conference on DIAGNOSIS AND PREDICTION IN MECHANICAL ENGINEERING SYSTEMS DIPRE 1 Consanin ONESCU, Nicolae POPA Universiy of Pieşi, ROMANIA mihai.boan@ugal.ro, consanin.georgescu@ugal.ro
CUTTER TECHNOLOGY ADDING VALUE TO EXCAVATORS
CUTTER TECHNOLOGY ADDING VALUE TO EXCAVATORS Cug is our profession. MEETING THE CHALLENGES An American company focused on hydraulic cuer aachmens Wor wih a German manufacurer of rock cug excavaor aachmens,
Expanded Options for the MM GRIT 28.. Grooving and Chamfering Milling Heads
Page 1 / 5 MM GRIT 28K-45A MM GRIT 28K-75-6T10 MM GRIT 28K-60-6T10 MM GRIT 28K-45-6T10 Expanded Options for the MM GRIT 28.. Grooving and Chamfering Milling Heads Page 2 / 5 Highlights Following market
Extremely small dimensions, extremely high precision.
Product innovations Edition 2011-1 Drilling and threading _TOOL INNOVATIONS IN DRILLING Extremely small dimensions, extremely high precision. SOLID CARBIDE DRILLS Walter Titex X treme the universal high-performance
List No STANDARD All sizes 1 each
Carbide Tipped Carbide Tipped offers excellent wear resistance for general reaming of steel, cast iron, plastics, and other abrasive non-ferrous materials. Longer tool life in production applications.
E R H 10 (N) - 11 (C) 1
Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank
E R H 10 (N) - 11 (C) 1
Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank
Good reasons to use Albrecht drill chucks
3 * Good reasons to use Albrecht drill chucks Quality 2-phase quality control e.g. 100% run-out accuracy test (similar to DIN 10888) parts made to fit each other exactly working parts are case-hardened
The Ultimate Solid Carbide Indexable Drill with a
The Ultimate Solid Carbide Indexable Drill with a Chamfering Option! Replaces Any Cylindrical Solid Carbide or High Speed Steel Drill www.iscar.com Engineered for Chamfering Performance Modular System:
BILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & Accessories BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD. Leitz Metalworking Technology Group
BILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & ccessories Leitz Metalworking Technology Group BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD CNC Toolholders C O N T E N T S Introduction 3 CT40 CT40
WIRE ROPE SLINGS made to any Specifications Required
WIR ROP SINGS made o any Specificaions Required Specify diameer and give sizes required as shown by he leers -- 1 2 3 4 5 Slings made up in Afgrip Aluminium Swage and Superloop Seel Swage Sandard ye Sizes
Sugar Mill Chain Products
Sugar Mill Chain Products SUGAR MILL CHAINS INRODUCION Connexus Inc., one of the leading suppliers of steel chain in North America has added a complete line of Sugar Mill Chains to our existing program,
CC BOOM BOOSTER. Upgrade kit Crawler crane Datasheet metric
CC 88001 BOOM BOOSTER Upgrade ki Crawler crane Daashee eric CC 88001 BOOM BOOSTER CONTENTS CC 88001 BOOM BOOSTER Cobinaions...................................................................................................
Tooth shapes (DIN 1840) of circular metal saw blades. Tooth shape BW hypoid-toothed, bevelled on side-bevelled
Info Info 172-1751 Tooth shapes ( 184) of circular metal saw blades Tooth shape A fine tooth pitch Tooth shape B hypoid-toothed Tooth shape BW hypoid-toothed, bevelled on side-bevelled Tooth shape C High
Development of Brushless DC Motor with low cogging torque for Ceiling Fan
PEDS29 Developmen of Brushless DC Moor wih low cogging orque for Ceiling Fan Chuan-Sheng Liu Member, IEEE Naional Formosa Universiy Dep. of Aeronauical Engineering 632 Yunlin, Taiwan csliu@nfu.edu.w Absrac
NIAGARA CUTTER THREAD MILLING THREAD MILLS
NIAGARA CUTTR THRAD MILLING THRAD MILLS 1 THRAD MILLS NTM100UN - Inch 3 NTM120UN - Inch 4 NTM160UN - Inch 5 NTM200UN - Inch 6 NTM400MI - Metric 7 CUTTING DATA Inch & Metric 8-9 Technical Info 10-11 THRAD
Taps, Dies & Threading
Hand s Premium er, Plug & Bottoming Style s s, s & ing Inch s er Style Plug Style Bottoming Style 6 32 2 3 0.688 GH3 915600 915628 915656 8 32 2-1/8 4 0.750 GH3 915601 915629 915657 10 24 2-3/8 4 0.875
Hoisting Equipment Trolleys
ush and geared ype rolley model and model Capaciy 500-20000 The rolley enales he exac posiioning or easy raversing of large loads wih eiher manual or powered hoising equipmen. Feaures has excellen rolling
THREADING. Korloy threading tools are available for machining various shapes of thread at various pitches while ensuring high quality performances
THREAING Korloy threading tools are available for machining various shapes of thread at various pitches while ensuring high quality performances 1 Code System 02 Holder Code System 02 Insert Code System
Carbon Steel RHS and Pipe
SECTION 11: INTRODUCTION CARBON STEEL RHS AND PIPE Caron Seel RHS an Pipe Manufacuring sanars Srucural RHS & Pipe is manufacure y col forming an elecric resisance weling an is ese o mee he following Ausralian
INDEX METRIC SOCKET SCREWS. Page CAP HEAD SCREWS TORQUE INFORMATION 3
INDEX METRIC SOCKET SCREWS Page CAP HEAD SCREWS TORQUE INFORMATION 3 DIMENSIONAL INFORMATION 4-5 M1.6 - M5 6-7 M12 - M18 8 M20 - M27 9 M30 - M42 10 FINE PITCH CAP - M16 11 LOW HEAD SCREWS TECHNICAL INFORMATION
T Strainers. Applications. Pressures to 3705 PSIG Temperatures to 800ºF STRAINERS FEATURES MATERIALS END CONNECTIONS SIZES RATINGS
Applications Steam, Liquid, Gas and Oil Service Process Equipment Water and Waste Power Industry Pulp and Paper Chemical Industry Metals and Mining Strainers Pressures to 3705 PSIG emperatures to 800ºF
NEW. ARNO Mini-System. AMS the new modular and extremely flexible. Minimum bore diameter from 2,5 mm and bore depth up to 30 mm.
NEW Introducing AMS ANO - Mini - System www.arno.de AMS ANO -Mini-System! High productivity for machining small diameter applications. Maximum reliability, high precision and guaranteed repeatability due
List Ideal for Steels, Exotics and Difficult to Machine Materials. Type 5 (Lc=1 Thread) Type 6 (Lc=3 Threads) Miniature, Helical Flute
List 41200 Miniature, Helical Flute P450 Size Threads Cutter Dia. Overall Neck Shank Dia. No. of Per Inch D L Lc L1 d 0 80 0.045 1.625 0.013 0.165 1/8 3 5 4120000115 1 72 0.055 1.625 0.016 0.198 1/8 3
TRASCO ES: 0 Backlash Coupling TRASCO ES
RO : 0 Backlash oupling RO RO : 0 backlash coupling RO is our zero backlash coupling designed o compensae or misalignmen and vibraion dampening or indexing applicaions. he compac design o RO makes i he