Thread Milling. Tool Systems.

Size: px
Start display at page:

Download "Thread Milling. Tool Systems."

Transcription

1 The affordable sysem wih high performance allows hreading and / or circlip grooving in high precision. The polygonal connecion of inser and milling body improves he efficiency and precision of he process significanly: Longer ool life Higher machining volume Higher feed raes Shorer processing imes High sabiliy High securiy a inerruped cuing Milling

2 Milling Sysems for Circular Milling The affordable sysem wih high performance allows hreading and / or circlip grooving in high precision. The polygonal connecion of inser and milling body improves he efficiency and precision of he process significanly: Longer ool life Higher machining volume Higher feed raes Shorer processing imes High sabiliy High securiy a inerruped cuing Affordable and flexible sysem for shor processing imes and long ool lifes. eep, rue o gauge hreads Accurae free-form conours Accurae grooving Boom hreads can be cu almos o he boom wihou undercus. By using he same piches, he sorage and acquisiion coss decrease also. Smooh cuing and low cuing pressure resuls in high surface qualiy and long ool lifes. A conical posiion of inser pocke guaranees sabiliy of he ool shaf. Furher advanages are he radially back ground hread profile, exremely high wedge angle, a more sable cuing edge as well as a posiive rake angle. The opimum applicaion area are fine hreads and/or very shor hread lenghs. Exensive range of solid carbide hread milling cuers. Spiral-grooved grooves Sof cu Excellen surface qualiies Also for hin-walled workpieces A ool for righ- and lef-hand hreads milling wih undercu milling rill hread milling 14, Muli ooh hread milling cuers, ideal for shor hread lenghs and very rigid clamping of workpiece and cuer. Secional hread milling for high-qualiy large hreads from M24. STC-1 wih 10 edges Bigges advanage for any long hreads from M24: A shorer process ime compared o cuers wih insers and easier assembly. STC-2 and STC-3 epending on he hread lengh (pich, maerial) much faser han STC-1. 20

3 Milling Symbols 1 Trio-Cu 12 Type designaion M sandard IN 1835 Form A shaf wihou clamping surface M wih undercu (Trio-Cu) IN 1835 Form B shaf wih Weldon clamping surface for righ- and lef hand inernal hread for lef hand hread modify your NC-program! IN 6535 Form A Solid carbide shaf wihou clamping surface AR / AL for righ- and lef hand exernal hread for lef hand hread modify your NC-program! IN 6535 Form B Solid carbide shaf wih Weldon clamping surface hread milling Parial form Parial form hread milling Cuer wih ighening hread 60 Poin angle Ø min. 8 Smalles necessary bore-diameer Inernal coolan supply IN 13 sandard of insers Shor escripions Alpha (α) A A1 B f6 B H7 B W C d1 d2 d g6 h6 P R E Poin angle of milling inser Groove widh Basic widh in he Groove Inser holder widh of axial grooving ool Groove widh of axial grooving ool Tool widh of axial grooving ool Chamfer widh Cuing diameer Milling body diameer (fron) Large diameer of milling body Fiing face diameer of hreaded milling ool Shaf diameer of milling body (Arbor) Fligh circle of inser Nominal diameer of concave radius inser Widh blank inser F H P H S L L1 L G L HA L PF L S M P R Widh of railing chamfer Inser heigh Slider heigh (Axial grooving ool) Lengh of milling ool Clamping lengh of milling ool Usable hread lengh a he muli-ooh hread milling Holder lengh Inser heigh of milling body edge Inser heigh of edge inerfering conour Lengh of fiing face Shaf lengh clamping lengh (eph) size Radius (general/ coon) Formula for Tool Lenghs L WKZ = L GK + L 1 + (+ ) 21

4 Milling Milling Inser holder see page Cuing daa see page 189 Connecable in accordance wih» mimaic mi» riven Tool Holders M 60 IN 13 Typ P ,00 9,6 2,65 0,80 0, ,50 9,6 2,50 0,95 0, ,75 9,6 2,25 1,20 1,010 only M ,00 10,5 2,25 1,20 1,127 only M14, M ,00 10,5 2,25 1,20 1, ,00 16,0 2,80 1,03 0, ,50 16,0 2,55 1,28 0, ,00 16,0 2,05 1,78 1, ,50 16,0 2,05 1,78 1, ,50 16,0 2,05 0,78 1,444 only M ,00 16,0 3,05 1,78 1, P2020 1,50 20,0 2,55 1,28 0, P2020 2,00 20,0 2,55 1,28 1, P2020 3,00 20,0 2,15 1,68 1,745 only M ,50 26,0 1,85 1,98 0, ,00 26,0 2,55 1,28 1, ,00 26,0 2,95 0,88 1, ,50 24,0 2,75 1,08 2,023 only M ,50 26,0 2,90 1,93 2, ,00 26,0 2,90 1,93 2, ,00 26,0 2,65 2,18 2,262 only M ,50 26,0 2,65 2,18 2, ,00 26,0 3,85 3,48 2, Exernal hread according o IN 13 on reques M UN NPT 60 AR / AL Parial form Type G ,7 2,125 1,33 0, * 16,0 2,70 1,68 0, ,5-4* 16,0 2,70 1,68 0, ,7 2,70 1,05 0, P ,0 2,15 1,68 0, P20 P ,7 4,15 1,00 0, P ,7 2,95 1,80 0, ,0 2,75 2,08 0, ,5-5 26,0 2,65 2,18 0, ,5-6 26,0 3,85 0,70 0, * No suied for pich 4,0 wih he cuers and

5 Milling Connecable in accordance wih» mimaic mi» riven Tool Holders 1 Milling Inser holder see page Cuing daa see page 189 Condiional deliverable Furher sizes on reques BSW BS Type / " P , ,25 1,1 1,371 BSW 9/16" , ,4 2,15 1,5 1,494 BSW 5/8" + 11/16" , ,7 2,2 1,4 1,728 BSW 3/4" + 13/16" , ,1 1,675 1,622 BSW 7/8" + 15/16" , ,1 1,675 1,83 BSW 1" * 3, ,65 2,125 2,098 BSW 1 1/8"+1 1/4" * 4, ,175 2,7 2,455 BSW 1 3/8"+1 1/2" P2020 3, ,7 2,225 2,098 BSW 1 1/8"+1 1/4" P2020** 4, ,15 2,675 2,455 BSW 1 3/8"+1 1/2" , ,4 2,675 2,455 BSW 1 3/8" , ,4 2,675 2,455 BSW 1 1/2" , ,9 2,875 2,955 BSW 1 5/8"+1 3/4" BSF BS Type / " P , ,6 2,25 1,1 1,177 BSF 5/8" + 11/16" , ,25 1,1 1,371 BSF 3/4" + 13/16" , ,4 2,15 1,5 1,494 BSF 7/8" , ,7 2,20 1,4 1,728 BSF 1" , ,10 1,675 1,622 BSF 1 1/8" + 1 1/4" , ,10 1,675 1,83 BSF 1 3/8" - 1 5/8" * 3, ,65 2,125 2,098 BSF 1 3/4" + 2" * 4, ,175 2,7 2,455 BSF 2 1/4" - 2 3/4" P2020 3, ,15 1,675 1,83 BSF 1 3/8" - 1 5/8" P2020 3, ,7 2,225 2,098 BSF 1 3/4" + 2" P2020** 4, ,15 2,675 2,455 BSF 2 1/4" - 2 3/4" , ,1 1,675 1,83 BSF 1 3/8" - 1 5/8" , ,65 2,175 2,098 BSF 1 3/4" + 2" , ,4 2,675 2,455 BSF 2 1/4" - 2 3/4" , ,9 2,875 2,955 BSF 3" - 3 1/4" Exernal hread BSW / BSF see nex page * No suied for cuers and ** No suied for cuer

6 Milling Milling Inser holder see page Cuing daa see page 189 Condiional deliverable Furher sizes on reques Connecable in accordance wih» mimaic mi» riven Tool Holders BSW BSF BS AR / AL Type / " P , ,7 2,30 1,1 1,178 BSW / BSF - 14 Gg , ,7 2,25 1,4 1,374 BSW / BSF - 12 Gg , ,7 2,25 1,4 1,498 BSW / BSF - 11 Gg , ,7 2,25 1,4 1,646 BSW / BSF - 10 Gg , ,15 1,675 1,178 BSW / BSF - 14 Gg , ,15 1,675 1,374 BSW / BSF - 12 Gg , ,75 2,075 1,498 BSW / BSF - 11 Gg , ,15 1,675 1,646 BSW / BSF - 10 Gg , ,15 1,675 1,829 BSW / BSF - 9 Gg * 3, ,75 2,075 2,056 BSW / BSF - 8 Gg * 3, ,15 2,225 2,348 BSW / BSF - 7 Gg * 4, ,15 2,225 2,737 BSW / BSF - 6 Gg P2020 1, ,10 1,725 1,178 BSW / BSF - 14 Gg P2020 2, ,10 1,725 1,374 BSW / BSF - 12 Gg P2020 2, ,10 1,725 1,498 BSW / BSF - 11 Gg P2020 2, ,10 1,725 1,646 BSW / BSF - 10 Gg P2020 2, ,10 1,725 1,829 BSW / BSF - 9 Gg P2020** 3, ,65 2,175 2,056 BSW / BSF - 8 Gg P2020** 3, ,65 2,175 2,348 BSW / BSF - 7 Gg P2020** 4, ,15 2,675 2,737 BSW / BSF - 6 Gg , ,75 2,075 1,478 BSW / BSF - 11 Gg , ,60 2,175 2,056 BSW / BSF - 8 Gg , ,60 2,175 2,348 BSW / BSF - 7 Gg , ,40 2,675 2,737 BSW / BSF - 6 Gg *** 5, ,40 2,675 3,281 BSW / BSF - 5 Gg G IN BSW 228/1 BSF 55 AR / AL Parial form Type / " r S max. 16 1,814-3, ,75 1,625 0,35 2, ,175-6, ,65 2,175 0,6 2, Taper pipe hread BSPT according o BS.84 on reques * No suied for cuers and ** No suied for cuer *** No suied for cuer

7

8 Milling Milling Inser holder see page Cuing daa see page 189 Connecable in accordance wih» mimaic mi» riven Tool Holders UNC ASME Type / " 10 2, ,25 1,2 1,29 UNC , ,5 2,13 1,52 1,35 UNC , ,7 2,13 1,52 1,485 UNC , ,05 1,775 1,577 UNC P20 P2018 3, ,65 2,175 1,809 UNC P2020** 3, ,65 2,175 2,043 UNC , ,05 3,275 2,454 UNC , ,85 3,475 2,979 UNC *** 5,644 4,5 26 3,85 3,475 3,289 UNC 4 ½ UNF ASME Type / " 10 1, ,6 2,5 0,95 0,733 UNF 1/ , ,5 2,5 0,95 0,827 UNF 9/ , ,7 2,5 0,95 0,945 UNF 3/ , ,7 3,15 0,95 1,071 UNF 7/ P20 P2020 2, ,15 1,675 1,228 UNF ** No suied for cuer *** No suied for cuer

9 Milling Connecable in accordance wih» mimaic mi» riven Tool Holders 1 Milling Inser holder see page Cuing daa see page 189 Aricle condiioned on sock Tr IN Typ Chip angle 12 2,00 11,7 2,5 1,1 1,25 Tr 16x2 - Tr 20x ,00 11,0 2,23 1,42 1,75 Tr 18x3 - Tr 20x ,00 12,0 2,15 1,5 2,25 Tr 20x * 3,00 14,0 2,3 1,5 1,75 TR 24x3 - Tr 32x * 5,00 15,0 3,15 2,1 2,75 Tr 26x * 5,00 15,0 3,15 2,1 2,75 Tr 28x * 6,00 16,2 4,27 3,0 3,25 Tr 30x6 - Tr 32x * 6,00 16,2 4,22 3,03 3,25 Tr 34x6 - Tr 42x ,00 25,0 3,2 2,37 2,75 Tr 44x5 - Tr 48x *** 7,00 22,0 4,0 2,65 3,75 Tr 38x7 - Tr 42x *** 7,00 22,0 4,0 2,65 3,75 Tr 44x *** 8,00 25,0 4,75 3,4 4,25 Tr 46x8 - Tr 48x *** 8,00 25,0 5,03 3,13 4,25 Tr 50x8 - Tr 52x *** 9,00 25,0 4,73 3,42 4,75 Tr 55x9 - Tr 60x *** 10,00 25,0 4,65 3,5 5,25 Tr 65x10 - Tr 80x Tr AR / AL IN Typ Chip angle 12 1,50 11,7 0, ,00 11,7 1, ,00 11,7 1, ,00 11,7 2, * 3,00 16,0 1,75 8 / 6 3 / 6 16* 4,00 16,0 2,25 8 / 6 3 / 6 16* 5,00 16,0 2,75 8 / 6 3 / 6 16* 6,00 16,0 3,25 8 / 6 3 / ,00 25 / 26 2,25 8 / 6 3 / 6 25*** 5,00 25 / 26 2,75 8 / 6 3 / 6 25*** 6,00 25 / 26 3,75 8 / 6 3 / 6 25*** 7,00 25 / 26 3,75 8 / 6 3 / 6 25*** 8,00 25 / 26 4,25 8 / 6 3 / 6 25*** 9,00 25 / 26 4,75 8 / 6 3 / 6 25*** 10,00 25 / 26 5,25 8 / 6 3 / 6 * No suied for cuers and *** No suied for cuers , and

10 Milling Milling Inser holder see page Cuing daa see page 189 Condiional deliverable Furher sizes on reques Connecable in accordance wih» mimaic mi» riven Tool Holders ACME ASME Typ / " Chip angle 16 5, ,02 2,23 1,52 1" - 5 Gg /8" - 5 Gg , ,04 3,21 1,9 1¼" - 4 Gg - 1½"-4 Gg , ,9 2,75 1,9 1¾" - 4 Gg - 2" - 4 Gg , ,65 3,5 2,54 2¼" - 3 Gg - 2¾" - 3 Gg Rd IN Typ / " Chip angle 13 3, ,15 2,1 1,588 Rd 20 x 1 / , ,15 2,1 1,588 Rd 22 x 1 / , ,4 1,9 1,588 Rd 24 x 1 /8- Rd 26 x 1 / , ,4 1,9 1,588 Rd 28 x 1 /8- Rd 32 x 1 / , ,4 1,9 1,588 Rd 34 x 1 /8- Rd 38 x 1 / * 4, ,15 2,575 2,117 Rd 40 x 1 /6- Rd 55 x 1 / * 4, ,15 2,575 2,117 Rd 58 x 1 /6- Rd 80 x 1 / * 4, ,15 2,575 2,117 Rd 82 x 1 /6 - Rd 100 x 1 / * 6, ,15 3,125 3,175 Rd 105 x 1 /4 - Rd 200 x 1 / Rd IN Typ / " Chip angle 16 3, ,65 2 1,588 Rd 28 x 1 / , ,85 3,4 2,117 Rd 65 x 1 / , ,85 3,4 3,175 Rd 105 x 1 /4 - Rd 120 x 1 / Knuckle hread acc. o IN on reques * No suied for cuers and

11 Milling Connecable in accordance wih» mimaic mi» riven Tool Holders 1 Circular Milling Tools wih Polygonal Inser Sea Insers see page Cuing daa see page 189 IN 1835 Form A IN 1835 Form B IN 6535 Form A IN 6535 Form B Spare par No. Type Form d h6 d1 max. S max. (-d1)/2 L L1 Shaf Bore Ø min. recoended Screwdriver Screw B ,0 11,7 2,35 67, B ,0 11,7 2,35 67, A ,0 11,7 2,35 67, B ,0 11,7 2, A ,0 11,7 2, T8 IP M2,5x B ,0 11,7 2, A ,0 11,7 2, B ,0 17,7 4,35 67, B ,0 17,7 4,35 67, A ,0 17,7 4,35 67, B ,0 17,7 4,35 82, A ,0 17,7 4,35 82,4 36 T8 IP M3x A ,0 17,7 4, A ,0 17,7 2,85 82, A ,0 17,7 2,85 122, B ,5 21,7 5, P B ,5 21,7 5, A ,5 21,7 5, B ,5 21,7 5, T15 IP M4x A ,5 21,7 5, A ,5 21,7 3,1 105, B ,6 27,7 7,05 79,6 30, B ,6 27,7 7,05 79,6 30, A ,6 27,7 7,05 79,6 30, B ,6 27,7 7,05 94,6 45, A ,6 27,7 7,05 94,6 45, B ,6 27,7 7,05 109,6 60,5 T20 IP M5x13, A ,6 27,7 7,05 109,6 60, A ,5 27,7 6, , A ,5 27,7 6,1 149,5 21, A ,5 27,7 6,1 178,5 21,5 Screw orques max T08 IP 1,0 Nm T08 IP 1,1 Nm T15 IP 3,8 Nm T20 IP 5,5 Nm 31

12 Milling Connecable in accordance wih» mimaic mi» riven Tool Holders Circular Milling Tools for riven Toolholders Insers see page Cuing daa see page 189 Form A Form ER IN 1835 Form A IN 6499 Spare par No. Type Form d h6 d1 max. S max. (-d1)/2 L L1 Shaf Bore Ø min. recoended Screwdriver Screw A ,0 11,7 2, ER ,0 11,7 2,35 37, ER ,0 11,7 2, T8 IP M2,5x A ,0 17,7 4, ER ,0 17,7 4,35 41, ER ,0 17,7 4, T8 IP M3x P A ,5 21,7 5,1 62,4 14, ER ,5 21,7 5,1 49,5 14, ER ,5 21,7 5, ,4 T15 IP M4x A ,6 27,7 7,05 69,6 20, ER ,6 27,7 7, ,4 T20 IP M5x13, ER ,6 27,7 7, ,4 Screw orques max T8 IP 1,0 Nm T8 IP 1,1 Nm T15 IP 3,8 Nm T20 IP 5,5 Nm Changing Insers Clamp cuer before changing inser. Loosen inser screw. Remove used inser and clean he inser pocke before clamping new inser. Please use he appropriae TIP hex key for he ighening of he insers and consider he screw ighening orques in he ables. 32

13 Milling Connecable in accordance wih» mimaic mi» riven Tool Holders 1 Circular Milling Tools wih Polygonal Inser Sea Insers see page Cuing daa see page 189 Form A Form B Please adap cuing daa o overhangs lengh Spare par No. Type Form Bore Ø min. recoended d1 d2 max. S max. (-d1)/2 L L1 M d g6 L PF Screwdriver Screw *** B 12 9,5 11,7 1,1 13,5 M5 5,5 5, A 18 9,0 14,4 17,7 4,35 29,5 19,5 M8 8,5 5, ** B 18 9,5 17,7 4,1 18,5 M5 5,5 5, *** B 18 11,0 17,7 3,35 18,5 M6 6,5 5, P A 22 11,5 18,0 21,7 5,1 35,0 25,0 M10 10,5 5, P20** B 22 11,5 21,7 5,1 20,5 M6 6,5 5, P20*** B 22 13,5 21,7 4,1 20,5 M8 8,5 5, A 27 13,6 22,5 27,7 7,05 42,5 29,5 M12 12,5 5, ** B 27 13,6 27,7 7,05 22,6 M8 8,5 5, *** B 27 18,0 27,7 4,85 22,6 M10 10,5 5, ** Slim design for hread milling *** Reinforced design Screw orques max T8 IP 1,0 Nm T8 IP 1,1 Nm T15 IP 3,8 Nm T20 IP 5,5 Nm Assembling Insrucions Recoended ighening orque for screw-in circular milling body size (M) Wrench size Tighening orque Nm M5 7 8 M M M M

14 Technical aa Cuing aa Reference Values PolyREAM SolidCUT Maerial Srengh Measuremen Ø 2,4-3,15 Ø 4 Ø 4,8-16 a Ø 0,2 Vc (m/min.) Vc (m/min.) 1.1 General consrucion seel < 800 N/² ,20-0, ,03-0,04 0,03-0,06 0,05-0, Free cuing seel < 800 N/² ,20-0, ,03-0,04 0,03-0,06 0,05-0, Unalloyed cemenaion seel < 800 N/² ,20-0, ,03-0,04 0,03-0,06 0,05-0, Alloyed cemenaion seels < 1000 N/² ,15-0, ,01-0,02 0,01-0,03 0,05-0, Unalloyed hea-reaable seel < 850 N/² ,20-0, ,01-0,02 0,01-0,03 0,05-0, Unalloyed hea-reaable seel < 1000 N/² ,15-0, ,01-0,02 0,01-0,03 0,05-0, Alloyed hea-reaable seel < 800 N/² ,20-0, ,03-0,04 0,03-0,06 0,05-0,10 A 1.8 Alloyed hea-reaable seel < 1300 N/² ,12-0, ,01-0,02 0,03-0,05 0,04-0, Cas < 850 N/² ,20-0, ,01-0,02 0,04-0,07 0,05-0, Niriding seel < 1000 N/² ,15-0, ,01-0,02 0,04-0,07 0,05-0, Niriding seel < 1200 N/² ,15-0, ,01-0,02 0,03-0,05 0,04-0, Ball bearing seel < 1200 N/² ,15-0, ,01-0,02 0,03-0,05 0,04-0, Spring seel < 1200 N/² ,15-0, ,01-0,02 0,03-0,05 0,04-0, Rapid seel < 1300 N/² ,12-0, ,01-0,02 0,03-0,05 0,04-0, Cold work ool seel < 1300 N/² ,12-0, ,01-0,02 0,03-0,05 0,04-0, Ho work ool seel < 1300 N/² ,12-0, ,01-0,02 0,03-0,05 0,04-0, Sainless seel, sulphured < 850 N/² ,20-0, ,03-0,04 0,03-0,04 0,05-0, Sainless seel, ferriic < 750 N/² ,20-0, ,03-0,04 0,03-0,04 0,05-0, Sainless seel, marensiic < 900 N/² ,15-0, ,03-0,04 0,03-0,04 0,05-0,12 R 2.4 Sainless seel, ferriic/marensiic <1100 N/² ,15-0, ,03-0,04 0,03-0,04 0,05-0, Sainless seel, auseniic/ferriic < 850 N/² ,20-0, ,03-0,04 0,03-0,04 0,05-0, Sainless seel, auseniic < 750 N/² ,20-0, ,03-0,04 0,03-0,04 0,05-0, Hea-resising seel < 1100 N/² ,15-0, ,03-0,04 0,03-0,04 0,05-0, Flake-graphie cas iron N/² ,20-0, ,03-0,07 0,03-0,07 0,04-0, Flake-graphie cas iron N/² ,20-0, ,03-0,07 0,03-0,07 0,04-0, Spheroidal graphie cas iron N/² ,20-0, ,03-0,07 0,03-0,07 0,04-0,08 F 3.4 Spheroidal graphie cas iron N/² ,20-0, ,03-0,07 0,03-0,07 0,04-0, Whiehear malleable cas iron N/² ,20-0, ,03-0,07 0,03-0,07 0,04-0, Whiehear malleable cas iron N/² ,20-0, ,03-0,07 0,03-0,07 0,04-0, Blackhear malleable cas iron N/² ,20-0, ,03-0,07 0,03-0,07 0,04-0, Blackhear malleable cas iron N/² ,20-0, ,03-0,07 0,03-0,07 0,04-0, Aluminium (unalloyed, low alloyed) < 350 N/² ,20-0, ,05-0,07 0,05-0,07 0,06-0, Aluminium alloys < 0,5% Si < 500 N/² ,20-0, ,05-0,07 0,05-0,07 0,06-0, Aluminium alloys 0,5-10% Si < 400 N/² ,05-0,07 0,05-0,07 0,06-0, Aluminium alloys 10-15% Si < 400 N/² ,05-0,07 0,05-0,07 0,06-0, Aluminium alloys > 15% Si < 400 N/² ,05-0,07 0,05-0,07 0,06-0, Cooper (unalloyed, low alloyed) < 350 N/² ,20-0, ,05-0,07 0,05-0,07 0,06-0, Copper wrough alloys < 700 N/² 4.8 Cooper special alloys < 200 HB 4.9 Cooper special alloys < 300 HB N 4.10 Cooper special alloys > 300 HB 4.11 Brass, shor-chipping, Bronze, Red brass < 600 N/² ,20,0, ,05-0,07 0,05-0,07 0,06-0, Brass, long-chipping < 600 N/² 4.13 Thermoplasic ,08-0,1 0,08-0,1 0,1-0, Thermoseing plasic ,08-0,1 0,08-0,1 0,1-0, Fibre-reinforced plasics ,02-0,04 0,02-0,04 0,03-0, Magnesium and magnesium alloys < 850 N/² Graphie Wolfram and wolfram alloys Molybdenum and molybdenum alloys Pure nickel Nickel alloys ,20-0, Nickel alloys < 850 N/² ,20-0, ,02-0,04 0,02-0,04 0,03-0, Nickel-chrome alloys Nickel- and cobal alloys < 1300 N/² S 5.6 Nickel- and cobal alloys < 1300 N/² 5.7 High emperaure alloys < 1300 N/² 5.8 Nickel-cobal-(chrome-) alloys < 1400 N/² 5.9 Pure Tianium < 900 N/² 5.10 Tianium alloys < 700 N/² ,15-0, Tianium alloys < 1200 N/² ,12-0, ,01-0,03 0,01-0,03 0,01-0, Hardened seel < 45 HRc ,04-0, ,03-0,05 0,03-0, HRc ,04-0, ,03-0,05 0,03-0,05 H HRc ,03-0, ,02-0,04 0,02-0, HRc ,03-0, HRc ,02-0,04 * The indicaed feed values apply only wih circular bringing in loop. uring linear bringing in movemen he feed moion amouns o max. 30% 188

15 Technical aa Sysem 14, TrioCUT PolyMILL 3/6 Cuing Edges TriMILL 12, 14,5, 15, 17, 20, 25 21, 26 Vc (m/min.) Vc (m/min.) Vc (m/min.) ,1-0,3 0,05-0, ,05-0, ,05-0, ,1-0,3 0,05-0, ,05-0, ,05-0, ,1-0,3 0,05-0, ,05-0, ,05-0, ,1-0,3 0,05-0, ,05-0, ,05-0, ,1-0,3 0,05-0, ,05-0, ,05-0, ,1-0,3 0,05-0, ,05-0, ,05-0, ,1-0,3 0,05-0, ,05-0, ,05-0, ,1-0,2 0,05-0, ,05-0, ,05-0, ,1-0,3 0,05-0, ,05-0, ,1-0,2 0,05-0, ,05-0, ,05-0, ,1-0,2 0,05-0, ,05-0, ,05-0, ,1-0,2 0,05-0, ,05-0, ,1-0,2 0,05-0, ,05-0, ,05-0, ,1-0,2 0,05-0, ,05-0, ,05-0, ,1-0,2 0,05-0, ,05-0, ,05-0, ,1-0,2 0,05-0, ,05-0, ,05-0, ,05-0, ,05-0, ,1-0,3 0,05-0, ,05-0, ,05-0, ,05-0, ,05-0, ,05-0, ,05-0, ,1-0,2 0,05-0, ,05-0, ,05-0, ,05-0, ,1-0,3 0,05-0, ,05-0, ,05-0, ,1-0,3 0,05-0, ,05-0, ,05-0, ,1-0,3 0,05-0, ,05-0, ,05-0, ,1-0,3 0,05-0, ,05-0, ,05-0, ,1-0,3 0,05-0, ,05-0, ,05-0, ,1-0,3 0,05-0, ,05-0, ,05-0, ,1-0,3 0,05-0, ,05-0, ,05-0, ,1-0,3 0,05-0, ,05-0, ,05-0, ,1-0,3 0,05-0, ,05-0,12 0,05-0, ,1-0,3 0,05-0, ,05-0,12 0,05-0, ,15-0, ,05-0, ,15-0, ,05-0, ,15-0, ,05-0, ,15-0, ,05-0, ,15-0, ,05-0, ,05-0, ,05-0, ,05-0, ,05-0, ,01-0, ,01-0, ,01-0, ,01-0, ,03-0, ,03-0, ,03-0,

GROOVING INSERTS. Thread Turning Index. Back to Main Index

GROOVING INSERTS. Thread Turning Index. Back to Main Index Grooving > Insers GOOVING INSETS Thread Turning Index Back o Main Index VADEX Ordering Code Sysem...Page 149 Exernal - DIN 471 eaining ing Grooves for Shafs...Page 150 Inernal - DIN 472 eaining ing Grooves

More information

Thread Milling Tool GWF

Thread Milling Tool GWF Thread Milling Tool GWF Thread milling >Ø20 mm Spiral flued solid carbide ools, some wih face cuer and fron chamfer This offers he following main advanages compared o he convenional mehods of apping and

More information

MGF Thread Milling Tools

MGF Thread Milling Tools MGF Thread Milling Tools Chamfering and hread milling righ from M2 Spiral flued solid carbide ools wih profile correcion and rear chamfer. Diameer range 2-20 mm This offers he following main advanages

More information

Cutting and Turning Tools

Cutting and Turning Tools Cuing and Turning Toos Our Company Specia Cuing Toos Circuar- and Thread Miing Toos Cuing and Turning Toos Driven Toohoders for CNC Machining Ceners Driven Toohoders for CNC Turning Machines Mui-Spinde

More information

Bluechip Tooling td Tel Table of Content Type Page range Metric M with chamfer M3 - M20 M5 - M Metric

Bluechip Tooling td Tel Table of Content Type Page range Metric M with chamfer M3 - M20 M5 - M Metric Bluechip Tooling td info@bluechiptooling.co.uk Tel 024 7647 4819 Circular Milling Cutters in Solid Carbide Version -Coating Uncoated Types Best Prices Best Endurance from Ø 4 Short processing times by

More information

microtes Precision Metrology in Action

microtes Precision Metrology in Action microes Prodej a servis měřící echniky. Tel: 776 182 329, 739 070 339 Srahovice 159, 747 24 Chuchelná e-mail: info@microes.cz hp: www.microes.cz Exclusively available from specialized dealers Precision

More information

Load Moving Systems. Steerman Heavy load moving systems model SX and model S. Capacity t

Load Moving Systems. Steerman Heavy load moving systems model SX and model S. Capacity t Seerman Heavy load moving sysems model SX and model S 10-100 These universal heavy load moving sysems have been designed for he safe and cos saving ranspor of loads up o 100 ons. Individual configuraion

More information

Hoisting Equipment Trolleys

Hoisting Equipment Trolleys ush and geared ype rolley model and model Capaciy 500-20000 The rolley enales he exac posiioning or easy raversing of large loads wih eiher manual or powered hoising equipmen. Feaures has excellen rolling

More information

Flow Monitor FS10. Description FS10-.. Connection diagram FS10. Ordering information. Electrical connection. Flow rate ranges

Flow Monitor FS10. Description FS10-.. Connection diagram FS10. Ordering information. Electrical connection. Flow rate ranges Flow Monior FS0 Descripion Compac single poin flow monior, MIN or MAX monioring opions, suiable for waer, oil, air or media wih similar hermal conduciviies. Wih screw-in or plug-in ype monioring head for

More information

PRODUCT DEsCRIPTION. optibelt ZR TIMINg belts IsO 5296

PRODUCT DEsCRIPTION. optibelt ZR TIMINg belts IsO 5296 opi ZR TIMINg belts srucure Bel layer ension cord ooh Fabric Fabric In order o obain a low level of wear on he running surfaces as well as achieving a high level of oohear srengh, a ough, wear resisan

More information

Flow Monitor FS10. Description FS10-.. Connection diagram FS10. Ordering information. Electrical connection. Flow rate ranges FS 10

Flow Monitor FS10. Description FS10-.. Connection diagram FS10. Ordering information. Electrical connection. Flow rate ranges FS 10 Flow Monior FS0 Descripion Compac single poin flow monior, MIN or MAX monioring opions, suiable for waer, oil, air or media wih similar hermal conduciviies. Wih screw-in or plug-in ype monioring head for

More information

HYDRAULIC JACKS & TOOLS

HYDRAULIC JACKS & TOOLS HYDRULIC JCKS & TOOLS 323 Hydraulic jacks & ools Table of conens Page characerisic of his force-oriened hydraulic Hydraulic cylinders, single-acing program is he operaing pressure which can be as high

More information

Series VCHC MPa Check Valve 06 G VCHC40 TMH ASD AS AS-FG AS-FP AS-FM ASP ASN AQ ASV AK VCHC ASS. How to Order. Specifications AS-FE KE

Series VCHC MPa Check Valve 06 G VCHC40 TMH ASD AS AS-FG AS-FP AS-FM ASP ASN AQ ASV AK VCHC ASS. How to Order. Specifications AS-FE KE Ma Check Valve Series How o Order Using NSF-H cerified grease for he guide ring (sliding) secion Symbol Improved durabiliy in high- environmens by using a polyurehane elasomer poppe 06 G or size 06 3/4

More information

THE NEXT GENERATION FOR YOUR APPLICATIONS. QuickTrax EasyTrax UNIFLEX Advanced TKA series

THE NEXT GENERATION FOR YOUR APPLICATIONS. QuickTrax EasyTrax UNIFLEX Advanced TKA series THE NEXT GENERATION FOR YOUR APPLICATIONS QuickTrax EasyTrax UNIFLEX Advanced TKA series A NEW GENERATION THE NEXT GENERATION FOR YOUR APPLICATIONS For more han 60 years Tsubaki KabelSchlepp has been developing

More information

Mill - Thread Inserts and Kits

Mill - Thread Inserts and Kits Mill - Thread s and Kits Mill-Thread tools for threading on CNC milling machines by using helical interpolation programs Advantages of Mill-Thread Tools Same toolholder and insert can produce both right-hand

More information

LINEAR BAR GRILLS. Supply, Return, Extract Linear bar grilles and registers

LINEAR BAR GRILLS. Supply, Return, Extract Linear bar grilles and registers Supply, Reurn, Exrac Linear bar grilles and regisers LG-1 F W B N B B TIM model LG-1 is a reurn air grille wih fixed profiled linear blades of 0 wih 3 mm hickness, se a 12.5 mm or 6 mm pich. F = Frame

More information

TKA SERIES Chip-Tight Tube Series

TKA SERIES Chip-Tight Tube Series TKA55 Corporae Headquarers U.S. Tsubaki Power Transmission, LLC 301 E. Marquard Drive Wheeling, IL 60090 Tel: (800) 33-7790 Fax: (847) 459-95 www.ussubaki.com Roller Chain Division 81 Main Sree Holyoke,

More information

E R H 10 (N) - 11 (C) 1

E R H 10 (N) - 11 (C) 1 Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank

More information

CMT Vertical Mill-Thread

CMT Vertical Mill-Thread CMT Vertical Mill-Thread Carmex presents a new family of vertical thread milling indexable inserts and toolholders to perform a wide variety of threads. Advantages of CMT - Vertical Mill-Thread Ground

More information

Technical data Hydraulic crawler crane HS 825 HD

Technical data Hydraulic crawler crane HS 825 HD Technical daa Hydraulic crawler crane HS 825 HD Dimensions Basic machine wih undercarriage 2860 7360 3000 1700 1060 1000 3260 1200 2335 4610 5480 1080 700 4200 310 R 3900 11245 Operaing weigh The operaing

More information

Index. General Information 5-6. Technical Information. 1-pole terminal boards. 2-pole terminal boards. 3-pole terminal boards. 4-pole terminal boards

Index. General Information 5-6. Technical Information. 1-pole terminal boards. 2-pole terminal boards. 3-pole terminal boards. 4-pole terminal boards Terminal Blocks Index Page General Informaion Technical Informaion pole erminal boards pole erminal boards 3pole erminal boards pole erminal boards pole erminal boards ype KL...K ype K M (acc. o DIN )

More information

ng Drilli ng eadi Thr Turni ng illi ders ol H Tool r la ders odu hol M Tool

ng Drilli ng eadi Thr Turni ng illi ders ol H Tool r la ders odu hol M Tool 1 HSS drilling Drilling 2 Solid carbide drilling 3 Indexable insert drilling 4 Reaming and Countersinking 5 HSS taps and dies Threading 6 Circular and Thread Milling 8 Turning Tools Turning 9 EcoCut 10

More information

Solid Carbide Thread Milling

Solid Carbide Thread Milling Solid Carbide Thread Milling 07 - '06 Contents Page GRADES OF COMBIDEX SOLID CARBIDE THREAD MILLS Micrograin 4 Order Example 4 ISO - Metric Thread 6O 5 ISO - Metric Fine Pitch Thread 6O 5 ISO - Metric

More information

Threading tools to JIS standard

Threading tools to JIS standard Taps for metric, metric-fine, UNC, UNF and PT threads For universal applications, stainless steel, cast iron and aluminium as well as for hard machining -PM high-performance taps with new TiAlN-coating

More information

Drive systems. Cranes with character. ABUS crane systems targeted operation. Moving on up. crane systems. t t v. max.

Drive systems. Cranes with character. ABUS crane systems targeted operation. Moving on up. crane systems. t t v. max. Cranes wih characer max. 0 ABUS crane sysems argeed operaion Drie sysems crane sysems Moing on up. Pole change sysems he fas way from A o B Experienced crane operaors are horoughly conersan wih he behaiour

More information

Electronic timer CT-MKE Multifunctional with 1 thyristor

Electronic timer CT-MKE Multifunctional with 1 thyristor Daa shee Elecronic imer CT-MKE Mulifuncional wih 1 hyrisor The CT-MKE is a mulifuncional elecronic ime relay. I is from he CT-E range. The CT-E range is he economic range of ABB s ime relays and offers

More information

Size d Grain # AC No. mm in mm in mm in. Size. mm mm mm

Size d Grain # AC No. mm in mm in mm in. Size. mm mm mm Accessories SANING ISCS FOR ANGLE AN VERTICAL SANERS AC No. Grain # s mm in mm in P-5 125 5 22.2 7/8 14~60 FG-5PX-1 P-6 150 6 22.2 7/8 14~60 FA-4CHK-3, 3F FA-150K-2, 3 FA-6C-9, 9M P-7 180 7 22.2 7/8 14~60

More information

Carbide Drills When productivity matters - Stub 1. to Long 1

Carbide Drills When productivity matters - Stub 1. to Long 1 CARBIDE DRILLS Carbide Drills When productivity matters - Stub 1 to Long 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings Drill

More information

Solid Carbide Thread Milling

Solid Carbide Thread Milling Ordering Code Standard Fine D D L L T Height Pitch/mm Solid Carbide Thread Milling Contents Information Page - ISO Metric & External Thread Page - 2 ISO Metric Pitch & Fine Pinch External Thread 60º Page

More information

TOOLS TO FIRE YOUR EMOTION! NEW! V5513 Tube flaring tool set V4944, EAN V4945, EAN HOT17-2/EN/NO/9

TOOLS TO FIRE YOUR EMOTION! NEW! V5513 Tube flaring tool set V4944, EAN V4945, EAN HOT17-2/EN/NO/9 TOOLS TO FIRE YOUR EMOTION! V551 Tube flaring ool se 14 Valid unil: February 28, 2018 For new VAG and BMW brake lines wih addiional covering! approx. Ø 4.78 approx. Ø 5.15 1 Video Closed solid V4944 seel

More information

Solid carbide Twist Drills Overview

Solid carbide Twist Drills Overview Solid carbide Twist Drills Overview Manufacturer ß 000000000000 DIN similar to 899 338 338 338 6539 6539 6539 6539 6539 6539 6539 6539 6539 Counters.cut.Counters.cut. 3 x D 3 x D 3 x D, IKZ 3 x D, IKZ

More information

Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable

Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable REAMERS Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable the ultimate reference book is here... BLACK BOOK The ultimate reference book:

More information

Note t Metal glow plugs are always fitted in the 2.7 ltr. common rail engine.

Note t Metal glow plugs are always fitted in the 2.7 ltr. common rail engine. Removing and insalling glow plugs Page 1 of 5 Removing and insalling glow plugs Noe Meal glow plugs are always fied in he 2.7 lr. common rail engine. Two differen ypes of glow plugs are fied in he 3.0

More information

MOTORISED VALVES. stainless steel body threaded ports, 3/8-1/2-3/4. Translucent polyamide (PA) PA66, GB 30% (ball fibre reinforced)

MOTORISED VALVES. stainless steel body threaded ports, 3/8-1/2-3/4. Translucent polyamide (PA) PA66, GB 30% (ball fibre reinforced) MOTORISE VALVES sainless seel body hreaded pors, /8 - / - / / Series 90 FEATURES High f due o angled sea design Ani-waerhammer design (fluid enry under he disc) Acuaor roaable hrough 60 Mainaining posiion

More information

BALL BEARING UNITS SET SCREW TYPE PILLOW BLOCKS CAST HOUSING UCP2 SET SCREW TYPE FLANGED UNITS CAST HOUSING UCF2

BALL BEARING UNITS SET SCREW TYPE PILLOW BLOCKS CAST HOUSING UCP2 SET SCREW TYPE FLANGED UNITS CAST HOUSING UCF2 ERIG UIT ET CREW TYPE PIOW OCK CT OUIG UCP haf Diameer 90 8 / 3 / ET CREW TYPE FGED UIT CT OUIG UCF haf Diameer 90 88 UCF / 3 / haf Diameer 90 94 / 3 / 76 77 . COTRUCTIO The K bearing uni is a combinaion

More information

Price List Connecting and Lifting Systems

Price List Connecting and Lifting Systems C O N N E C T I N G A N D L I F T I N G S Y S T E M S Lis 1-2010 Connecing and Lifing Sysems PFEIFER SEIL- UND HEBETECHNIK GMBH DR.-KARL-LENZ-STRASSE 66 87700 MEMMINGEN TEL. Suppor +49 (0) 83 31-937-345

More information

WÜPLAST WÜPLAST. WÜRTH Industrie Service. Screws for thermoplastics. Screws for thermoplastics DE EN

WÜPLAST WÜPLAST. WÜRTH Industrie Service. Screws for thermoplastics. Screws for thermoplastics DE EN WÜPLAST Screws for hermoplasics WÜRTH Indusrie Service DE EN WÜPLAST Würh Indusrie Service GmbH & Co. KG Indusriepark Würh, Drillberg 97980 Bad Mergenheim T +9 79 31 91-0 F +9 79 31 91-000 wueplas@wuerh-indusrie.com

More information

E R H 10 (N) - 11 (C) 1

E R H 10 (N) - 11 (C) 1 Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank

More information

SAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS

SAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN

More information

We do Specials! mimatic Special Solutions» Cutting Tools» Angle Heads»

We do Specials! mimatic Special Solutions» Cutting Tools» Angle Heads» » Cutting Tools» Angle Heads» We do Specials! We do Specials! Manufacturer of Precision Tools since 1974 We do Specials! mimatic Special Solutions» Cutting Tools» Angle Heads» Table of Contents Cutting

More information

Info Overview - solid carbide twist drills (I) Drilling Tools

Info Overview - solid carbide twist drills (I) Drilling Tools Info Overview - solid carbide twist drills (I) Brand 0 0 0 0 0 0 0 0 Company standard Company standard Company standard Company standard 6539 6539 6539 6539 5 x D Countersink Countersink Article number

More information

GU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ

GU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ GU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ GU 500 DZ Premium Cobalt Drills The GU 500 DZ drill series from Guhring is designed for the machinist who doesn t want to settle for average results. When carbide

More information

Technical data Hydraulic lift crane LR Courtesy of Crane.Market

Technical data Hydraulic lift crane LR Courtesy of Crane.Market Technical daa Hydraulic lif crane Complies wih ANSI/ASME B 0.5 LR Serial number 5xxx Couresy of Crane.Marke Dimensions Basic machine wih undercarriage R 8 0 7 9 0 9 0 6 0.5 59 8 8 7 5 6 7 5 7. 6 R 0 7.

More information

THREADING. Korloy threading tools are available for machining various shapes of thread at various pitches while ensuring high quality performances

THREADING. Korloy threading tools are available for machining various shapes of thread at various pitches while ensuring high quality performances THREAING Korloy threading tools are available for machining various shapes of thread at various pitches while ensuring high quality performances 1 Code System 02 Holder Code System 02 Insert Code System

More information

2/2 MOTORISED VALVES. stainless steel body threaded ports, 3/8-1/2-3/4. Series

2/2 MOTORISED VALVES. stainless steel body threaded ports, 3/8-1/2-3/4. Series MOTORISE VALVES sainless seel body hreaded pors, /8 / / / Series 9 FEATURES High flow due o angled sea design Aniwaerhammer design (fluid enry under he disc) Acuaor roaable hrough 6 In opion closing of

More information

Aluminium and (-2)* aluminium casting alloys *() * emulsion (long-chip) **

Aluminium and (-2)* aluminium casting alloys *() * emulsion (long-chip) ** System components for installation Standard range of HELICOIL plus manual and machine taps Range of types Recommended guide values Manual Machine tap tap Through hole Blind hole Cutting Cooling All hole

More information

Drills Jobber, R40 UNI

Drills Jobber, R40 UNI Drills Jobber, - offers superior performance - for longer tool life 0955 9.55 133 87 10 D168 0955 0960 9.6 133 87 10 D168 0960 0970 9.7 133 87 10 D168 0970 0980 9.8 133 87 10 D168 0980 0990 9.9 133 87

More information

Crawler Crane. Complies with ANSI/ASME B 30.5 LR enus LR Courtesy of Crane.Market

Crawler Crane. Complies with ANSI/ASME B 30.5 LR enus LR Courtesy of Crane.Market Crawler Crane LR Complies wih ANSI/ASME B 0.5 enus LR 00.0 Couresy of Crane.Marke Dimensions Basic machine wih undercarriage R 8 0 7 9 0 9 0 6 0.5 59 8 8 7 5 6 7 5 7. 6 R 0 7. 6 Operaing weigh Remarks

More information

Series Features: Diameters:.312,.375,.500,.625,.750, 1.000, 1.250, 1.500

Series Features: Diameters:.312,.375,.500,.625,.750, 1.000, 1.250, 1.500 New design indexable threadmilling inserts and tool holders allow for a profitable and effective way to produce external and internal applications quickly while generating superior surface finish. Diameters:.312,.375,.500,.625,.750,

More information

Specification for Wire Rope Type Electrical Hoist

Specification for Wire Rope Type Electrical Hoist YUANTAI CRANE Specificaion for Wire Rope Elecrical Hois Compac srucure, ligh weigh, safe and reliable. High universaliy, inerchangeabiliy and lifing capaciy. Convenien,easy mainenance and operaion,sable

More information

Bridging the gap... R40 UNI SPM DRILLS. with carbide drills. for an on-site demonstration contact Sutton Tools on

Bridging the gap... R40 UNI SPM DRILLS. with carbide drills. for an on-site demonstration contact Sutton Tools on Bridging the gap... with carbide drills R40 DRILLS for an on-site demonstration contact Sutton Tools on 1800 335 350 100% Australian Owned The 130 four facet point with a web profile grind combined with

More information

Series S0700 Plug-in Manifold Stacking Base Manifold Optional Parts

Series S0700 Plug-in Manifold Stacking Base Manifold Optional Parts Series S0700 lug-in Manifold Sacking Base Manifold Opional ars Blanking plae SS0700-0A- I is used by aaching on he manifold block for being prepared for removing a valve for mainenance reasons or planning

More information

Accessories, spare parts and measuring equipment

Accessories, spare parts and measuring equipment Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare

More information

Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides -

Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides - CARBIDE ENDMILLS Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides - Various shank styles to suit your needs

More information

ER40 Collet Sets and Collets. TG100 Collets. TG150 Collets. Retention Knobs for Standard and Coolant Thru. Vertical/Horizontal Setup Holding Fixture

ER40 Collet Sets and Collets. TG100 Collets. TG150 Collets. Retention Knobs for Standard and Coolant Thru. Vertical/Horizontal Setup Holding Fixture Table of Contents Toolholders Toolholders 422 438 CAT50 Rigid Tap Holders and Parts ER40 Collet Sets and Collets Key s 423 441 451 CAT50 Tension & Compression Tap Holders and Parts TG100 Collets Solid

More information

GrooVical Precise Grooving & Turning Applications METRIC. Innovative Grooving & Turning Solutions

GrooVical Precise Grooving & Turning Applications METRIC. Innovative Grooving & Turning Solutions GrooVical Precise Grooving & Turning Applications METIC Innovative Grooving & Turning Solutions GrooVical Precise Grooving & Turning Applications New ange of Indexable Grooving Inserts The Groovical family

More information

TRASCO ES: 0 backlash coupling

TRASCO ES: 0 backlash coupling RO : 0 backlash coupling RO is our zero backlash coupling designed o compensae for misalignmen and vibraion dampening for indexing applicaions. he compac design of RO makes i he righ choice for all precise

More information

MPA BAU Hannover Inspection Report Page 1. Strip Coating Line Babe 1/Babe 2

MPA BAU Hannover Inspection Report Page 1. Strip Coating Line Babe 1/Babe 2 MPA BAU Hannover Inspecion Repor 082618.1 Page 1 MPA BAU Hannover Inspecion Repor # 082618.1 Su Cusomer: Manufacurer: Order: voesalpine Sahl GmbH voesalpine Sahl GmbH Srip Line Babe 1/Babe 2 9 June 2008/Markus

More information

TRASCO ES: 0 Backlash Coupling

TRASCO ES: 0 Backlash Coupling RO : 0 Backlash oupling RO RO : 0 backlash coupling he main design funcion of he RO coupling is o ransmi moion while absorbing misalignmens and vibraions wih absolue precision and wihou any backlash whasoever.

More information

Chains and Sprockets for the. Bulk Material Handling Industry. » Product catalogue» Special solutions» Accessories» Spare parts.

Chains and Sprockets for the. Bulk Material Handling Industry. » Product catalogue» Special solutions» Accessories» Spare parts. EN Chains and Srockes for he Bulk Maerial Handling Indusry» Produc caalogue» Secial soluions» Accessories» Sare ars Produc Caalogue 5 Leading OEM comanies in he bulk handling indusry rely on KeenWulf.

More information

XSz 8... XSz 50 Solenoid actuated fail-safe safety valve

XSz 8... XSz 50 Solenoid actuated fail-safe safety valve > > /-way or size: G /4... G, /4... NT > > ouble valve conrol sysem, inherenly failsafe wihou residual pressure > > ynamic self monioring > > For use wih pneumaic cluch and brake sysems and oher -way safey

More information

CI/SfB. Xt6. July Ancon 500 Tension Systems for the Construction Industry

CI/SfB. Xt6. July Ancon 500 Tension Systems for the Construction Industry CI/SfB July 2010 X6 Ancon 500 Tension Sysems for he Consrucion Indusry 2 This brochure is prined on paper produced from 80% recycled pos-consumer fibre and 20% virgin pulp which is sourced from responsibly

More information

Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving.

Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving. Edition 2015-10 Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving. The main product is the QuadCut, which on

More information

For Extra Large Pitches METRIC

For Extra Large Pitches METRIC or Extra arge Pitches METRIC or Extra arge Pitches Up to 25mm or 1 tpi Unique Design for Heavy Duty Applications VKX Vargus Tough Submicron Grade Inserts Anti-Rotation Stopper Toolholder Support Suited

More information

HSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,

HSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273, Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks

More information

-treme thread cutting. New. Swiss-Line. Inch

-treme thread cutting. New. Swiss-Line. Inch New TM -treme thread cutting Swiss-ine Inch 2015-2016 Swiss-ine Swiss-ine Swiss style lathes are becoming a popular alternative to large lathes and machining centers in many companies. Carmex is introducing

More information

D24. American ACME D02 D25 D26 D28 D28. UNJ (Unified Constant Thread) American Buttress (ABUT) British Buttress (BBUT) D09 D29 D30 D30 D30

D24. American ACME D02 D25 D26 D28 D28. UNJ (Unified Constant Thread) American Buttress (ABUT) British Buttress (BBUT) D09 D29 D30 D30 D30 3 Code System 02 Holder Code System Thread Inserts 24 American ACME 02 Insert Code System 25 Stub ACME 03 Technical Information for 26 28 28 UNJ (Unified Constant Thread) American Buttress (ABUT) British

More information

CUTTER TECHNOLOGY ADDING VALUE TO EXCAVATORS

CUTTER TECHNOLOGY ADDING VALUE TO EXCAVATORS CUTTER TECHNOLOGY ADDING VALUE TO EXCAVATORS Cug is our profession. MEETING THE CHALLENGES An American company focused on hydraulic cuer aachmens Wor wih a German manufacurer of rock cug excavaor aachmens,

More information

Driven Toolholders for HAAS Machines

Driven Toolholders for HAAS Machines riven Toolholders for HAAS Machines Manufacturer of Precision Tools since 1974 INNOVATION PRECISION INIVIUALITY QUALITY SERVICE Tale of Contents Type Page riven Toolholders SL 20 / SL 30 8-11 Modular Tool

More information

38999 Series II Series. Applications. Features. Series II

38999 Series II Series. Applications. Features. Series II Applicaions High Performance Miliary Aircraf Commercial Airlines Communicaions Equipmen 38999 Series II MIL-DTL-38999 Series II connecors offer high densiy conac arrangemens in a low profile miniaure circular

More information

Drills Manufactured to National Aerospace Standards (NAS)

Drills Manufactured to National Aerospace Standards (NAS) Drills Manufactured to National Aerospace Standards (NAS) Tool Materials Manufactured from premium grades of HSS and HSS-E materials These substrates provide good hot hardness and therefore good tool life

More information

ALU-XP E T. The Alu-XP range: Exceptional performance and reliability.

ALU-XP E T. The Alu-XP range: Exceptional performance and reliability. The Alu-XP range: Exceptional performance and reliability. At Europa Tool we recognise that manufacturing components consistently and cost effectively is essential. To this aim, we have produced all data

More information

PRODUCT CATALOG 2010 SİZ K AGRICULTURE HORTICULTURE GREENHOUSE AUTHOR,=(' ',STR,%UTOR &,032R7(R,1 TUR.(Y. %ñ/gñ1/(r '$1,ì0$1/,K

PRODUCT CATALOG 2010 SİZ K AGRICULTURE HORTICULTURE GREENHOUSE AUTHOR,=(' ',STR,%UTOR &,032R7(R,1 TUR.(Y. %ñ/gñ1/(r '$1,ì0$1/,K PRODUCT CATALOG 2010 AGRICULTURE HORTICULTURE GREENHOUSE %ñ/gñ1/(r '$1,ì0$1/,K SİZ K İ TR oransal Ð K E as EL zaj pomp do AUTHOR,=(' ',STR,%UTOR &,032R7(R,1 TUR.(Y ( Ferilizer & Chemical injecors are waer

More information

HSS Hollow. Structural Sections DIMENSIONS AND SECTION PROPERTIES HSS: TECHNICAL BROCHURE

HSS Hollow. Structural Sections DIMENSIONS AND SECTION PROPERTIES HSS: TECHNICAL BROCHURE HSS Hollow Srucural Secions DIMENSIONS AND SETION PROPERTIES HSS: TEHNIAL BROHURE 01 Seel Tube Insiue 516 Waukegan Road, Suie 17 Glenview, IL 6005 TEL: 87.61.1701 FA: 87.660.7981 HSS Manufacuring Mehods

More information

C6 RS6 Front Steel Brake Disc/Pad/Caliper Change

C6 RS6 Front Steel Brake Disc/Pad/Caliper Change C6 RS6 Fron Seel Brake Disc/Pad/Caliper Change This PDF is spli ino 3 secions as follows Remove/Fi Brake Pads Remove/Fi Brake Caliper & Disc Torue figures These procedures are aken from Elsawin, he Audi

More information

CLA 25 AC motor ACME SCREW LINEAR ACTUATOR OVERALL DIMENSIONS. Rear bracket SP. Stroke. Capacitor. Standard head with threaded hollow bore BA

CLA 25 AC motor ACME SCREW LINEAR ACTUATOR OVERALL DIMENSIONS. Rear bracket SP. Stroke. Capacitor. Standard head with threaded hollow bore BA ACME SCREW LINEAR ACUAOR CLA 5 AC motor OVERALL DIMENSIONS Stroke La = + Stroke Capacitor La = + Stroke Rear bracket SP Pin Standard head with threaded hollow bore BA 1 Attachment A1 Attachment A depth

More information

C560 Electronic Time Relays

C560 Electronic Time Relays C560 Elecronic Time Relays Conens Ordering Deails Mono-funcion Elecronic Time Relays... /4 Muli-funcions Elecronic Time Relays... /5 Accessories for Elecronic Time Relays.../5 Technical Daa Technical Daa.../6

More information

Electrohydraulic pumps

Electrohydraulic pumps + () 699959 Elecrohydraulic pumps RE 1 1/. 1/7 Replaces: RE 1 1/3.1 EHP Nominal volage (DC):...11 V Size of pump: 1...22.5 cm 3 /rev Table of conens Conen Page Ordering code 2 Program overview Technical

More information

Contents. Milling. Solid end mills

Contents. Milling. Solid end mills UPDATE 2016-2 SOLUTIONS & SUPPORT By choosing Seco, you get more than just a comprehensive portfolio of advanced metal-cutting solutions and expert services. You get a partnership based on trust, respect

More information

NEW. ARNO Mini-System. AMS the new modular and extremely flexible. Minimum bore diameter from 2,5 mm and bore depth up to 30 mm.

NEW. ARNO Mini-System. AMS the new modular and extremely flexible. Minimum bore diameter from 2,5 mm and bore depth up to 30 mm. NEW Introducing AMS ANO - Mini - System www.arno.de AMS ANO -Mini-System! High productivity for machining small diameter applications. Maximum reliability, high precision and guaranteed repeatability due

More information

Cutting

Cutting wist drills Miniature drills Sheet metal drills Core drills Step drills Centring and spot drills aper pin drills Solid carbide drills Solid carbide tapping ools Carbide reversible cutting inserts wist

More information

TC SERIES THREADMILLING. Threadmilling Insert Nomenclature Chart TI 15 N 8 UN. type of insert. Neutral Positive. insert length

TC SERIES THREADMILLING. Threadmilling Insert Nomenclature Chart TI 15 N 8 UN. type of insert. Neutral Positive. insert length C SERIES HREADMIING hreadmilling Insert Nomenclature Chart I 15 N 8 UN I threadmilling insert insert length type of insert N P 75.750 (19.05) 1 1.000 (25.40) 1.5 1.500 (38.10) hreadmilling Cutter Nomenclature

More information

LEGEND SUPER FULLY AUTOMATIC

LEGEND SUPER FULLY AUTOMATIC FULLY AUTOMATIC LEGEND SUPER Models UNIT Super 60 Super 80 Super 120 Super 180 Super 250 Super 1000 Injecion Unis Screw Diameer MM 3 8 40 45 50 65 110 Max. Sho Weigh (PS) GMS 85 150 220 425 850 7000 Plasicizing

More information

Thread Milling AM-CAT-THREADMILL(GB)-07/08. Cutters, Inserts and Holders

Thread Milling AM-CAT-THREADMILL(GB)-07/08. Cutters, Inserts and Holders Thread Milling AM-CAT-THREAMILL(GB)-07/08 Cutters, Inserts and Holders Allied Maxcut Thread Mills FEATURES - Complete programme available of both solid carbide and indexable insert thread mills - Full

More information

Low Speed High Torque Hydraulic Motors Xcel XLH, XLS, XL2 and XL4 Series

Low Speed High Torque Hydraulic Motors Xcel XLH, XLS, XL2 and XL4 Series Low Speed High Torque Hydraulic Moors Xcel XLH, XLS, XL2 and XL4 Series Conens Xcel Spool Valve Moors.... 4 Produc Descripion, Feaures Benefis and Applicaions.... 4 Xcel XLH Series (16-)... 5 Specificaions....

More information

Drilling tools. From page Centring drills NC spot drills. Twist drills HSS, HSS/ Co, solid carbide. From page 10-6

Drilling tools. From page Centring drills NC spot drills. Twist drills HSS, HSS/ Co, solid carbide. From page 10-6 tools entring drills N spot drills From page 10-3 Twist drills HSS, HSS/ o, solid carbide From page 10-6 Step drills one drill bits arbide masonry drill Bit tools From page 10-44 ircle cutters T-A Insert

More information

CI/SfB. Xt6. July Tension and Compression Systems for the Construction Industry

CI/SfB. Xt6. July Tension and Compression Systems for the Construction Industry CI/SfB July 2010 X6 Tension and Compression Sysems for he Consrucion Indusry 2 This brochure is prined on paper produced from 80% recycled pos-consumer fibre and 20% virgin pulp which is sourced from responsibly

More information

AIP Chain Factory Power Industry

AIP Chain Factory Power Industry www.aip.com.pl AIP Chain Facory Mining Power Inusry 1 ROUND LINK MINING CHAINS acc. o DIN 22252, PN-G-46701 Mining chains use for scraper conveyors, coal ploughs use in unergroun mining faciliies an oher

More information

1 Collets and collet sleeves

1 Collets and collet sleeves 1 1.3 Wibemo - Honing sleeve 1.4 Wibemo - Extenso collets 1.6 Wibemo - Croco collets 1.10 Wibemo - CuBe collets 1.11 Wibemo - Phenol collets 1.12 Custom made collets 1.18 Wibemo - Wifex collets 1.22 Tornos

More information

ThreadMill. For Thread Milling

ThreadMill. For Thread Milling ThreadMill For Thread Milling Scandinavian Tool Systems Scandinavian Tool Systems AB Our business idea is to offer the best rigid threading system to our customer and to be in the front line of cutting

More information

SR-SAF Ball nose roughing endmill

SR-SAF Ball nose roughing endmill / BALL NOSE ENDMILLS SR-SAF Ball noe roughing endmill Cutter program, SR 10-20 m m m m m m (CM) ød 5m th l 3 l 3 Long cylindrical hank Weldon hank More taper Threaded modular head Reference D c D 3 Max.

More information

[Liu, 5(12): December2018] ISSN DOI /zenodo Impact Factor

[Liu, 5(12): December2018] ISSN DOI /zenodo Impact Factor [Liu, 5(1): December018] ISSN 48 804 DOI- 10.581/zenodo.09405 Imac Facor- 5.070 GLOBAL JOURNAL OF ENGINEERING SCIENCE AND RESEARCHES RESEARCH ON THE COMPARISONS BETWEEN SABAH CYCLE AND DIESEL CYCLE OF

More information

LOAD REDI LIFT TABLES. l Light Duty. l Medium Duty. l Portable. l Tilt

LOAD REDI LIFT TABLES. l Light Duty. l Medium Duty. l Portable. l Tilt LIFT TABLES l Ligh Duy l Medium Duy l Porable l Til TILT TABLES Beech Til Tables are designed for muliple applicaions enabling he work o be posiioned up o degrees, decreasing he need for workers o srech,

More information

CI/SfB Xt6. June Tension and Compression Systems. for the Construction Industry

CI/SfB Xt6. June Tension and Compression Systems. for the Construction Industry CI/SfB X6 June 2017 Tension and Compression Sysems for he Consrucion Indusry Tension and Compression Sysems High performance in an archiecural design Tension and compression bars are increasingly being

More information

SC series(twist drill) for machining of cast iron, Al alloy

SC series(twist drill) for machining of cast iron, Al alloy C Tools (twist drill) for machining of cast iron, Al For materials with short chips such as cast iron, silicon-aluminum, etc. Cutting edge and shank with same. tools (twist drill) 2.0 2. 2.8.0 type 110SC0-0200

More information

KOOL Cut TM Modular Turning & Grooving Section F of 2017 Indexable Cutting Tools

KOOL Cut TM Modular Turning & Grooving Section F of 2017 Indexable Cutting Tools KOOL Cut TM Modular Turning & Grooving Section F of 2017 Indexable Cutting Tools Turning, Facing & Grooving System KOOL Cut Modular Turning, Facing & Grooving System-Technology KOOL Cut Graphic Index ---------------------------------------------------------------------------------------------------------------------------------

More information

TELESCOPIC BOOM CRAWLER CRANE

TELESCOPIC BOOM CRAWLER CRANE MACHINE WEIGHTS 35 METRIC TON CAPACITY STANDARD CRANE wih 3 secion- 27.2 m boom, 5,670 kg counerweigh, Main winch wih wire rope, and 750 mm 3-bar semi grouser rack shoes 31,802 kg OPTIONAL EQUIPMENT Exendable

More information

Drills Jobber, DXJ D D D D

Drills Jobber, DXJ D D D D Drills Jobber, DXJ 0840 8.4 117 75 0840 0840 0850 8.5 117 75 0850 0850 0860 8.6 81 0860 0860 00 8.7 81 00 00 03 8.73 11/32 81 03 03 0880 8.8 81 81 0880 0880 0890 8.9 8.9 81 81 0890 0890 9.0 9.0 81 81 0910

More information

VG-Cut. Complete Range of Turning Solutions INCH METRIC. Innovative Grooving & Turning Solutions

VG-Cut. Complete Range of Turning Solutions INCH METRIC. Innovative Grooving & Turning Solutions VG-Cut Complete Range of Turning Solutions INC METRIC Innovative Grooving & Turning Solutions VG-Cut Complete Range of Turning Solutions Deep Grooving, Threading, Parting Off, oring and Face Grooving VARGUS

More information

Universal milling tools Favora. passion for precision

Universal milling tools Favora. passion for precision Universal milling tools Favora passion for precision ToolService in Willich, Germany FRAISA thanks to tool reconditioning and material recycling www.bluecompetence.net End milling tools for

More information