Section 14. Gate Valves
|
|
|
- Dwain Dawson
- 5 years ago
- Views:
Transcription
1 Section 14 Gate Valves 221
2 A-Gate Brass Gate Valve S Brass Brass Brass Brass and Wheel Ductile Iron Threading ISO 228 Thread BSP 180 C 16 bar General Purpose Brass Gate Valve AGVFF/ AGVFF/ AGVFF/ AGVFF/ AGVFF/ AGVFF/ AGVFF/ AGVFF/ AGVFF/ Applications Water, Oil, Irrigation Peakflo Bronze Gate Valve S Bronze Bronze Bronze Bronze and Wheel Ductile Iron Thread BSP 170 C 20 Bar Bronze Gate Valve 152A PGV/ PGV/ PGV/ PGV/ PGV/ PGV/ ASMUSS
3 VM Stainless Steel Gate Valve S 316 Stainless Steel PTFE Thread BSP 180 C 14 bar Stainless Steel Gate Valve TC311 SGAVSS/ SGAVSS/ SGAVSS/ SGAVSS/ SGAVSS/ SGAVSS/ Vogt Forged Steel Class 800 Gate Valves Socket Weld or Screwed NPT Ends S Graphite Disc Cr13 /F Stellite Design ANSI B16.34 Thread (NPT) ASME B Socket weld End ASME B C 136 Bar Applications Steam, Oil and Petro Chemical Industry Forged Steel Gate Valve Class 800 API 602 Fig CODE SW ENDS CODE NPT ENDS SIZE L W APPROX KG VVGASW/015 VVGANPT/ VVGASW/020 VVGANPT/ VVGASW/025 VVGANPT/ VVGASW/032 VVGANPT/ VVGASW/040 VVGANPT/ VVGASW/050 VVGANPT/
4 DK Forged Steel Class 800 Gate Valves API 8 alf Stellite Trim Socket Weld or Screwed NPT Ends S Graphite Disc Cr13 or Stellite /F Stellite Design ANSI B16.34 Thread (NPT) ASME B Socket weld End ASME B C 136 Bar Applications Steam, Oil and Petro Chemical Industry Forged Steel Gate Valve Class 800 API 602 Fig W1GA alf Stellite CODE SW ENDS CODE NPT ENDS SIZE L W APPROX KG DKVGASW/015 DKVGANPT/ DKVGASW/020 DKVGANPT/ DKVGASW/025 DKVGANPT/ DKVGASW/032 DKVGANPT/ DKVGASW/040 DKVGANPT/ DKVGASW/050 DKVGANPT/ DK Forged Steel Class 800 Gate Valve API 5 Full Stellite Trim Socket Weld or Screwed NPT Ends Forged Steel Gate Valve Class 800 API 602 Fig W1GA Full Stellite CODE SW ENDS CODE NPT ENDS SIZE L W APPROX KG DKVGASWFS/015 DKVGANPTFS/ DKVGASWFS/020 DKVGANPTFS/ DKVGASWFS/025 DKVGANPTFS/ DKVGASWFS/032 DKVGANPTFS/ DKVGASWFS/040 DKVGANPTFS/ DKVGASWFS/050 DKVGANPTFS/ ASMUSS
5 Maxiflo Resilient Gate Valve Clockwise Closing Flanged Ends AAP Standards Mark Licence SMKP This licence covers DN50-DN300 valves. DN350-DN600 Approval Pending. Certified to AS4020 suitable for contact with drinking water S Ductile Iron (epoxy resin coating) Ductile Iron (epoxy resin coating) Ductile Iron (bonded Rubber) 431 Stainless Steel O'Ring EPDM Seal Bushing EPDM Applications Water, sewage and neutral liquid applications Design AS2638.2* Flange Drilling T/C AS4087 Coating Thickness AS C 1600KPa *N.B DN50 and DN65 are not covered by AS Resilient Gate Valve Clockwise Closing AS4087 Flanged Fig B5 (bolting same as AS2129 Table D) CODE BOLT NUMBER APPROX GEAR- SIZE L OLE AND WEEL OLES KG OPERATED DIAMETER SVF/ SVF/ SVF/ SVF/ SVF/ SVF/ SVF/ SVF/ SVF/ SVF/350 SVFG/ SVF/375 SVFG/ SVF/400 SVFG/ SVF/450 SVFG/ SVF/500 SVFG/ SVF/600 SVFG/ L andwheel to Suit Resilient Gate Valves above andle to Suit Resilient Gate Valve CODE SIZE OD APPROX KG CLOCKWISE CLOSING SVFW/ SVFW/ & SVFW/ SVFW/ SVFW/ SVFW/ & OD 225
6 Gate Valve OS&Y Rising Flanged Table E Ring Face Ring Nut Bolt and Nut Gland Follower Bolt Stuffing Box Stuffing Box Packing Gland Follower Yoke bushing and wheel S Cast Bronze Cast Bronze Cast Bronze Brass Full Face Nitrile Z/P Steel Steel Teflon Teflon Ductile Iron Cast Brass Flange AS2129 T/E MAX 150 C Design 13.8 Bar BS5150 Test ISO 5208 IWA Solid Gate Valve Table E Type Z41032 MVCIGRS/ MVCIGRS/ MVCIGRS/ MVCIGRS/ MVCIGRS/ ASMUSS
7 DK Forged Steel OS&Y Gate Valves Class 150 alf Stellite Trim Ends Flanged ANSI 150 S Graphite Disc Cr13 or Stellite /F Stellite Design ANSI B bar 537 C Forged Steel Gate Valve Class 150 Fig W1RFAA2F alf Stellite CODE SIZE FACE TO FACE ANDWELL APPROX KG DKVGA150CS/ DKVGA150CS/ DKVGA150CS/ DKVGA150CS/ DK Forged Steel OS&Y Gate Valves Class 300 alf Stellite Trim Ends Flanged ANSI 300 S Graphite Disc Cr13 or Stellite /F Stellite Design ANSI B bar 537 C Forged Steel Gate Valve Class 300 Fig W1RFBA2F alf Stellite CODE SIZE FACE TO FACE ANDWELL APPROX KG DKVGA300CS/ DKVGA300CS/ DKVGA300CS/
8 SUFA Cast Steel Class 150/300 Gate Valves API 8 alf Stellite Trim Ring Packing Packing Gland Gland Follower Nut Bushing and wheel S ASTM A216 WCB ASTM + /F Stellite ASTM A216 WCB+13Cr ASTM A276 T410 13Cr+Graphite ASTM A216 WCB Graphite A182F6 ASTM A216 WCB Carbon Steel Ductile iron Flange Dimensions ANSI B16.5 MAX Working Cold Working Class C Class C Class 150 Class 300 NB. Max depends on gasket material 19.6 Bar 51 Bar SUFA Cast Steel Gate Valve Class 150 SUVGA150CS/ SUVGA150CS/ SUVGA150CS/ SUVGA150CS/ SUVGA150CS/ SUVGA150CS/ SUVGA150CS/ SUVGA150CS/ SUVGA150CS/ SUFA Steel Gate Valve Class 300 SUVGA300CS/ SUVGA300CS/ SUVGA300CS/ SUVGA300CS/ SUVGA300CS/ SUVGA300CS/ ASMUSS
9 SUFA Cast Steel Class 150/300 Gate Valve API 5 Full Stellite Trim W S ASTM A216 WCB Ring ASTM + /F Stellite ASTM + /F Stellite 17-4 P 13Cr+Graphite ASTM A216 WCB Packing Klinger K54F Packing Gland A182F6 Gland Follower ASTM A216 WCB Nut Bushing Carbon Steel and wheel Ductile iron Flange Dimensions ANSI B16.5 MAX Working Cold Working Class C Class C Class 150 Class 300 NB. Max depends on gasket material 19.6 Bar 51 Bar Cast Steel Gate Valve Class 150 API 5 Full Stellite Trim & Klinger K54F Packing for Geothermal Service SUVGA150CS/5/K54F/ SUVGA150CS/5/K54F/ SUVGA150CS/5/K54F/ SUVGA150CS/5/K54F/ SUVGA150CS/5/K54F/ SUVGA150CS/5/K54F/ SUVGA150CS/5/K54F/ SUVGA150CS/5/K54F/ L Cast Steel Gate Valve Class 300 API 5 Full Stellite Trim & Klinger K54F Packing for Geothermal Service SUVGA300CS/5/K54F/ SUVGA300CS/5/K54F/ SUVGA300CS/5/K54F/ SUVGA300CS/5/K54F/ SUVGA300CS/5/K54F/ SUVGA300CS/5/K54F/ SUVGA300CS/5/K54F/ SUVGA300CS/5/K54F/
10 CMO Stainless Steel Knife Gate Valve Flanged ANSI 150 & Table E S Gland Packing Synthetic+PTFE Gland Gate 316 Stainless Steel Yoke Steel and Wheel Ductile Iron 304 Stainless Steel Clevis CF8 EPDM Flange ANSI 150 & AS2129 T/E 90 C 5 to 10 Bar depending on size Stainless Steel Knife Gate Valve EPDM (Unidirectional) CODE ANSI FLANGE CODE T/E FLANGE SIZE L W FLANGE TAPPINGS APPROX KG CMVA5V2I1/080 CMVA7V2I1/ M16 9 CMVA5V2I1/100 CMVA7V2I1/ M16 11 CMVA7V2I1/ M16 13 CMVA5V2I1/150 CMVA7V2I1/ M20 16 CMVA5V2I1/200 CMVA7V2I1/ M20 27 CMVA5V2I1/250 CMVA7V2I1/ M20 40 CMVA5V2I1/300 CMVA7V2I1/ M20 53 Applications Tailing, Slurries, Mining, Effluents, Food Processing, Abattoir Waste, Pulp Stock, Sugar Engineering, Water Treatment W Pneumatic Actuator for CMO Knife Gate Valves CODE SIZE LENGT WIDT DEPT APPROX KG CMA/ CMA/ CMA/ CMA/ CMA/ CMA/ L ASMUSS
11 Fabri Stainless Steel Knife Gate Valve Bi-Directional Type GATE VALVES S Gland Packing Acrylic+PTFE Gland Gate 316 Stainless Steel Yoke CF8 and Wheel 304 Stainless Steel Clevis CF8 White EPDM 138 C 10.3 bar W L Stainless Steel Knife Gate Valve EPDM Bidirectional Type C67S CODE SIZE L W FLANGE TAPPINGS UNC APPROX KG FAVC67S316/ /8 10 FAVC67S316/ /8 14 FAVC67S316/ /4 34 FAVC67S316/ /4 45 FAVC67S316/ /8 63 FAVC67S316/ /8 87 Stafsjo Stainless Steel Throughgoing Knife Gate Valve Flanged ANSI 150 S SS Gland Packing Gland Gate Yoke and Wheel PTFE 316 Stainless Steel SS Ductile Iron Stainless Steel PTFE with Viton o-ring Flange ANSI C with Viton 6 to 10 Bar depending on size Stainless Steel Knife Gate Valve PTFE Bi-Directional Type G CODE SIZE FACE TO FACE CENTRE TO TOP CENTRE TO BOTTOM BODY WIDT FLANGE TAPPINGS APPROX KG STAFVG/ /8 UNC 17 STAFVG/ /8 UNC 22 STAFVG/ /4 UNC 29 STAFVG/ /4 UNC 34 STAFVG/ /4 UNC 75 STAFVG/ /8 UNC 100 STAFVG/ /8 UNC
Fabricated Bevel Gear Operator Bi-Directional Metal Seat 150 PSI Bi-Directional Resilient Seat 150 PSI
Knife Gate Valves Uni-Directional (Metal Seated) Manual Handwheel Style KGV...2 Carbon Steel Technical Data 150 PSI 2 24...3 304 Stainless Steel Technical Data 150 PSI 2 24...3 316 Stainless Steel Technical
KNIFE GATE VALVE Product Ref. : KG02W/KG02L
General Description Model KG02 is a bidirectional knife gate valve suitable for most industrial application cases. With one piece body design, it combines robust and economy giving best cost effective
ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
KO Series. Cast Steel Gate Valves
FEATURES & BENEFITS Body and bonnet of Class 150 - Class 900 gate valves are usually connected with studs and nuts. The body and bonnet of Class 1500 - Class 2500 gate valves are usually a pressure sealed
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE The B model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging
VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS
PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of
BALL VALVES BUTTERFLY VALVES GLOBE VALVES GATE VALVES CHECK VALVES KNIFE VALVES Y STRAINERS ACTUATION BALL VALVES SS2020N-300 2 PIECE FLANGED ANSI 300 BALL VALVE Firesafe Certified Full Bore TMF1600 seats
Stainless Steel / Iron Valve ISO 9001
CAST IRON GATE VALVE CLASS 125 NON-RISING STEM. (N.R.S.) STEM: SS410 (BRASS / SS304) MODEL: CI-12N (CI-12N/CI-2NS) CAST IRON GATE VALVE CLASS 125 OUTSIDE SCREW AND YOKE. STEM: SS410 (BRASS / SS304) MODEL:
KVC VALVES AND PEX FITTINGS
KVC VALVES AND PEX FITTINGS 2011 KVC VALVES & PEX FITTINGS CATALOGUE 2 P a g e Table of contents 1. Cast Steel Valves..4 FIG. 272-CS-15 ( Gate ).....5 FIG. 272-CS-300 ( Gate )......6 FIG. 272-CS-600 (
Cast-Iron Valves G101 DI BUTTERFLY VALVE LEVER... 2 G401 CI GLOBE VALVE CL G403 CI GLOBE VALVE PN G103 DI BUTTERFLY VALVE GEAR...
Cast-Iron Valves PAGE G101 DI BUTTERFLY VALVE LEVER.... 2 PAGE G401 CI GLOBE VALVE CL125.... 9 G103 DI BUTTERFLY VALVE GEAR.... 3 G403 CI GLOBE VALVE PN16.... 10 G201 CI Y STRAINER CL125.... 4 G501 CI
Knife Gate Valve HERA-SH. PN 10/16, Class 150 DN Uni-directional Full-lug body. Type Series Booklet
Knife Gate Valve HERA-SH PN 10/16, Class 150 DN 50-600 Uni-directional Full-lug body Type Series Booklet Legal information/copyright Type Series Booklet HERA-SH All rights reserved. The contents provided
KNIFE GATE VALVES -- MODEL D
PRODUCT DESCRIPTION Flanged unidirectional knife gate valve for high pressure applications One piece integral cast body with seating wedges and bolted bonnet. High flow rates with low pressure drops. Several
BIDIRECTIONAL WAFER Knife Gate Valve
09/03/2016 BIDIRECTIONAL WAFER Knife Gate Valve Bidirectional wafer design knife gate valve. Monoblock one piece cast iron body. Stainless steel gate. Two rubber sleeves. Provides high flow rates with
LATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
S-GATE type KNIFE VALVE with PNEUMATIC ACTUATOR. DN 450 to 600. See below. 5 bar min. / 7 bar max. Prohibited use on gases of group 1 for DN>100
CHARACTERISTICS The S-GATE knife valve is equipped with a pneumatic actuator and is dedicated to the automatic shut-off of loaded fluids such as slurries and powdery materials. The standard application
BIDIRECTIONAL WAFER Knife Gate Valve
05/10/2012 BIDIRECTIONAL WAFER Knife Gate Valve Bidirectional wafer design knife gate valve. Monoblock one piece cast iron body. Stainless steel gate. Two rubber sleeves. Provides high flow rates with
SVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D
Series 41 150# Flanged Standard Port Fire Safe / API-607 4 th Edition 1 PIECE REDUCED PORT BALL VALVE UNITS = INCHES SIZE CLASS 150 WEIGHTS L H W 1 1/2 11 6.50 3.86 9.06 2 21 7.01 4.65 9.06 3 40 7.99 5.98
ISO RESILIENT WEDGE GATE VALVE. Engineering Creative Solutions for Fluid Systems Since 1901
ISO RESILIENT WEDGE GATE VALVE Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS ISO RESILIENT WEDGE GATE VALVE Scope of Line...1 Features and Benefits...1 Suggested Specification...2
CAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES.
CAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES www.fnw.com Index Options & Accessories... 2 Standards... 2 Figure Number Matrix... 3 Pressure/Temperature Ratings... 3 Hydrostatic Test Pressures... 3 Carbon
VALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1
SELF-ACTING PRESSURE REDUCING VALVE M1 M1-15A-ENG PRESSURE REDUCING VALVE MODEL M1 VALFONTA MAIN CHARACTERISTICS The M1 model is self-operated bellows sealed pressure reducing valve. This series of regulators
WAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on
KNIFE GATE VALVES -- MODEL A
PRODUCT DESCRIPTION Wafer style, uni-directional knife gate valve. One piece integral cast body with guides to support the gate and seating wedges. High flow rates with low pressure drops. Several seat
Cast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The C model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). makes it ideal for use
WAFER STYLE KNIFE GATE VALVE
11 WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
Gate Valve (Model 1000)
Gate Valve (Model 1000) s: - 2 to 24 (50mm to 600mm) Rating: - Class 150 to Class 2500 Cast Steel Valves Flange End But-Weld End Information:- www.invacovalves.com sandesh@invacovalves.com invacovalves@gmail.com
CLASS 400 FORGED BRASS BALL VALVE
CLASS 400 FORGED BRASS BALL VALVE FIG. 214 Screwed body cap, PTFE seats, Blowout-proof stem. Screwed ends to BS 21. Nickel plated body. Chrome plated ball. UNI-FLO NYLON BALL VALVES FIG. 214NS/NB Features:
THROUGH CONDUIT KNIFE GATE VALVE. OBX 09/11 2nd EDITION Revision 1 Reserves the right to change specifications without notice
THROUGH CONDUIT KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging shut off on either normal or
arflu globe valves The quality you can trust Globe valves Because of their configuration,
The quality you can trust globe valves 2 18 Globe valves Because of their configuration, globe valves are perfect to regulate or limit the fluid port. epending on the needs of the system, design or open
WAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The EX(SER.10) model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging
Fasani Pressure Seal Cast Gate Valves - Style A Wedge Gate and Parallel Slide
A series of robust gate valves specifically designed for applications in the power industry Features General application Our pressure seal -Style A gate valves are recommended for several applications
Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963
800.231.6969 Condensed Valve Guide Gate Globe Check Ball Strainer Warren Valve - Quality Since 1963 Gate, Globe & Check Valves #1156 #2156 #3156 Gate Globe Check Pressures Class Figure 150 - #1156 300
Approved Branded Traceable Fire Protection & Waterworks Valves
Approved Branded Traceable Fire Protection & Waterworks Valves (800) 766-0076 www.smithcooper.com Los Angeles, CA Atlanta, GA Vancouver, WA Chicago, IL AWWA C515 Compliant CONSIDER Your Options Tamper
Size: 1/4 to 3. Material: 316 Stainless Steel, Carbon Steel,
Size: 1/4 to 4 Material: 316 Stainless Steel, Carbon Steel, Alloy 20, Hastelloy C, Monel, Brass, SW, BW, BSPT, 150#, 300#, 600#, Flanged Pressure: Vacuum to 3000 PSI* -50 to 600 F* ASME B16.34 Design Bottom
The GACHOT V501 gate valve offer the most possible reliability for process and critical applications
The GACHOT V501 gate valve offer the most possible reliability for process and critical applications Features Construction complies with NF EN 1984 Straight-through flow and full port Cast body (investment
See our expanding selection of products on Product Portfolio
See our expanding selection of products on www.fnw.com Product Portfolio Table of Contents Low Lead Products- Page 3 Ball Valves, Check Valves, Strainers, Water Hammer Arrestors Ball Valves, Brass - Page
BALL VALVE DATA SHEET NO. 01 (150#)
BALL VALVE DATA SHEET NO. 01 (150#) VALVE CODE BF101 VALVE TYPE Double Flanged Full Port BODY MATERIAL CARBON STEEL TO ASTM A 216 Gr. WCB CLASS 150# DESIGN STANDARD ISO 17292 SIZE 1/2" TO 1 1/2" 2" TO
UNIDIRECTIONAL Knife Gate Valve
UNIDIRECTIONAL Knife Gate Valve 24/04/2013 Unidirectional knife gate valve. One piece cast body with guides to support gate and seat wedges. Provides high flow rates with low pressure drop. Various seat
HD150/HD300 Heavy Duty Knife Gate Valve
Fabri-Valve HD150/HD300 Heavy Duty Knife Gate Valve HEAVY DUTY VALVES FOR THE OIL SANDS INDUSTRY Heavy Duty Knife Gate Valve The HD150 and HD300 Heavy Duty Knife Gate Valve The Fabri-Valve HD line of Heavy
L&T VALVES BUSINESS GROUP A
Larsen & Toubro Limited (L&T) is a US $ 5 billion engineering and construction company, with a strong presence in manufacturing, services and Information Technology. L&T was founded in 1938 by two Danish
Cast Steel. Carbon and Stainless Steel Gate, Globe and Check Valves
Cast Steel Carbon and Stainless Steel Gate, Globe and Check Valves Contents Cast Steel Standard Features 3 Testing, Modifications and Accessories Standard Product Range With DSI Zy-Gear Bevel Gear Chart
WAFER STYLE KNIFE GATE VALVE
MODEL WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut
BIDIRECTIONAL Knife Gate Valve
BIDIRECTIONAL Knife Gate Valve 30/10/2013 Bidirectional knife gate valve. Two piece cast body, joined by screws, with internal guides for smooth movement of gate during operation. Provides high flow rates
SUBMITTAL PACKAGE FIRE PROTECTION VALVES
SUBMITTAL PACKAGE FIRE PROTECTION VALVES Butterfly Valves Ductile Iron Grooved...pg 2-5 Grooved Check Valves...pg 6-8 OS&Y Valves...pg 9-12 ARGCO.com 800-854-1015 Updated 2/27/2017 ARGCO GROOVED BUTTERFLY
BI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES WITH D/A PNEUMATIC ACTUATOR
BI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES KGV XD-PRE SERIES FULLY LUGGED WITH RISING STEM & HANDWHEEL KGV XD-PRE SERIES FULLY LUGGED WITH D/A PNEUMATIC ACTUATOR KGV XD-PRE SERIES FULLY LUGGED WITH
UNIDIRECTIONAL WAFER Knife Gate Valve
03/01/2011 UNIDIRECTIONAL WAFER Knife Gate Valve Unidirectional wafer design knife gate valve. One piece cast body with guides to support gate and seat wedges. Provides high flow rates with low pressure
L15 HEAVY DUTY KNIFE GATE VALVE STANDARD PARTS LIST
L15 HEAVY DUTY KNIFE GATE VALVE The L15 model knife gate is a uni-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The design of the body
Type K03. Gate Valve Butt-Welded, Flanged DN PN Data Sheet Edition: EN 9 / together we are strong
PN 16 100 Gate Valve Butt-Welded, Flanged Data Sheet Edition: EN 9 / 2015 MPOWER Engineering, a.s. Pod vinicí 2028/20, Modřany, 143 00 Praha 4, CZ T: +420 225 371 300, F: +420 225 371 325 E: info@mpowergroup.eu,
DOUBLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.7
Application Double-eccentric butterfly valves are industrial valves, which are designed to fully open or close the passage of the working medium flowing through a pipeline. They can also be used for flow-control
FABRICAST VALVE. Knife Gate Valves & Custom Fabrication Toll Free: Fax:
FABRICAST VALVE Knife Gate Valves & Custom Fabrication 360-425-0306 Toll Free: 1-877-264-2503 Fax: 360-425-0353 1061 Industrial Way Longview, WA 98632 FIG 40 The Fabricast FIG 40 is a metal seated, uni-directional
UNIDIRECTIONAL WAFER Knife Gate Valve
29/01/2016 UNIDIRECTIONAL WAFER Knife Gate Valve Unidirectional wafer design knife gate valve. One piece cast body with guides to support gate and seat wedges. Provides high flow rates with low pressure
FASANI PRESSURE SEAL CAST GLOBE VALVES - STYLE B Y AND T PATTERN
A wide range of globe valves specifically designed for high pressure and high temperature applications, where low pressure loss is required. FEATURES GENERAL APPLICATION Our pressure seal globe valves
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 228 Features Bolted bonnet allows easy inspection and servicing without removal from
HEAVY DUTY KNIFE GATE VALVE
HEAVY DUTY KNIFE GATE VALVE The model knife gate is an uni-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The design of the body and
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 8 Features Bolted bonnet allows easy inspection and servicing without removal from
HELYON PRESSURE REDUCING VALVE MODEL M1
PRESSURE REDUCING VALVE MODEL - 5 Chemin du Jubin 69570 DARDILLY MAIN CHARACTERISTICS The model is self-operated bellows sealed pressure reducing valve. This series of regulators is suitable for steam,
Knife gate valve HG - Standard
Knife gate valve HG - Standard V R Data is only for informational purpose. All specifications are subject to change without notice. 1 Knife gate valve HG Stafsjö s knife gate valve HG has excellent flow
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
Ball Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼
Ball Valves Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ - 4...3 316 Stainless Steel Technical Data 2160 PSI ¼ - 4...3 Style BVSC...4 Carbon Steel Technical Data 2200 PSI ¼ - 2...5
Please note this is a condensed catalog. For a complete version, contact Velan directly.
STANDARD KNIFE GATE VALVE DESIGN FEATURES ADVANTAGES OVER FABRICATED VALVES Cast stainless steel body and investment cast yoke. In fabricated valves, leakage of corrosive medium due to neglected maintenance
AVK (WWE) BUTTERFLY VALVE DN 50 to DN (EVTLS)
Flangeless tapped lug Wafer Type Design code EN593 Flange connection to EN 1092 PN 6, 10, 16, 25 DESIGN Body Flangeless tapped lug wafer type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 /
JHawk Instrument Inc. warrants the
Warranty Statement JHawk Instrument Inc. warrants the component parts and workmanship of its products under normal use and service for a period of one year from the date of the shipment. All obligations
AVK (WWE) BUTTERFLY VALVE DN (3" to 32") 75 (EVML)
AVK (WWE) BUTTERFLY VALVE DN 80 800 (3" to 32") 75 (EVML) Mono flanged type Overall length DN 80300 to ISO 5752 long, basic series 16 (BS 5155 wafer long, DIN 3202K3), Overall length DN 3501000 to ISO
BUTTERFLY VALVES, BFV TYPE
BUTTERFLY VALVES, BFV TYPE In 94, our journey into the business of repairing valves and industrial instrumentation began. That journey has led us to represent and service well known American brands and
See our expanding selection of products on Product Portfolio
See our expanding selection of products on www.fnw.com Product Portfolio Table of Contents Low Lead Products- Page 3 Ball Valves, Check Valves, Strainers, Water Hammer Arrestors Ball Valves, Brass - Page
OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS
AVK FLOW CONTROL OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS InterApp World Valve Wouter Witzel TEC artec AVK 1 2 AVK FLOW CONTROL l OIL & GAS PLANTS CONTENT: AVK FLOW CONTROL 4-5 OFFSHORE PRODUCTION
Wafer, Semi Lug, Lug and Flanged Type
Year : Wafer, Semi Lug, Lug and Flanged Type Page 1 Year : Specification Description : GVC concentric rubber lined butterfly valves suitable for bi-directional flow and bubble tight shut-off at full rated
Technical changes kept in reserve WAFER STYLE KNIFE GATE VALVE. DN 50 to DN 250: 10 kg/cm² DN 300 to DN 400: 6 kg/cm²
WAFER STYLE KNIFE GATE VALVE The A model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
HEAVY DUTY KNIFE GATE VALVE. ANSI B16.5 (class 150) and DIN PN 10
HEAVY DUTY KNIFE GATE VALVE The SERIES knife gate is a uni-directional lug type valve designed according to the MSS-SP-1 and TAPPI TIS 405- standard for industrial service applications. The design of the
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
Fabri-Valve. CF33/CF133 Ported Slide Gate Valve
Fabri-Valve CF33/CF133 Ported Slide Gate Valve CF33/CF133 Ported Slide Gate Valve Fabri-Valve Figures C33 / C133 / F33 / F133 are bi-directional soft seated, slide gate valves designed for on/off service
butterfly valves high performance TRIPLE OFFSET HP-TRI REV0
high performance EXECUTION 1st OFFSET 2nd OFFSET 3rd OFFSET The BELVEN-TRI series incorporate triple offset disc configuration. With this configuration the disc seal makes contact with body seat, only
Approved. Size L H. 3" (76mm) 9-1/2" (241mm) 5-51/64" (147mm) 46. 4" (102mm) 11-1/2" (292mm) 6-45/64" (170mm) 81
pproved. Model: SD-NRV200CV Flanged Ends The Flanged End Check Valves are made of Iron Body, Bolted Bonnet and Horizontal Swing, painted with standard color. Epoxy coated inside and outside to WW C550
Control Valve. 3-Piece 30, 60, or 1/8" Slotted Port. General Chemical. Industrial. Power INLINE BALLVALVE.COM
324 Control 3-Piece 30, 60, or 1/8" Slotted General Chemical Industrial Power INLINE BALLVALVE.COM The 324 Series Control The 324 series control valve incorporates several innovative design features for
P R O D U C T R A N G E
PRODUCT RANGE OVERVIEW Range of Materials AUSTRALIAN PIPELINE VALVE BRAND Australian Pipeline Valve (APV) manufactures a complete Cast iron, Ductile iron (GGG40) range of ASME, API, BS and AS valves such
BI-DIRECTIONAL KNIFE GATE VALVE
Wastewater treatment plants Food and Beverage Chemical plants Sizes: Working pressure: DN 2"/ 50mm to DN 10"/ 250mm DN 12"/300mm to DN 16"/ 400mm DN 18"/450mm DN 20"/500mm to DN 24"/ 600mm DN 28"/700mm
15100 VALVES. E. Section Building Automation and Control System Guidelines
15100 VALVES PART 1: GENERAL 1.01 RELATED SECTIONS A. Section 15050 Basic Material and Methods B. Section 15545 Chilled Water System C. Section 15550 Heat Generation D. Section 15790 Coils E. Section 15955
BIDIRECTIONAL WAFER Knife Gate Valve
31/07/2014 BIDIRECTIONAL WAFER Knife Gate Valve - Bidirectional wafer-design knife gate valve. - One-piece cast body. - Provides high flow rates with low pressure drop. - Various seat and packing materials
TEL: Version: KW2
WWW.KLAMBON.COM 1 Page Klambon Water is a wholly owned subsidiary of West Rand Engineering (WRE), we are suppliers of valves, fittings and related products to all industries and our service extends to
GLOBE VALVE APPLICATION
SPECIFICATION GOBE VAVE APPICATION Globe valves are primarily use as control valves where throttling or both throttling an shut-off are require. Globe valves can also be use for on-off service; however,
Fabri-Valve. C67 Bi-Directional Knife Gate Valve
Fabri-Valve C67 Bi-Directional Knife Gate Valve C67 Bi-Directional Knife Gate Valve The Fabri-Valve Figure C67 features a unique, patented*, perimeter seal that provides bi-directional shutoff. The seal
Manufacturer & Supplier of High Quality Industrial Valves. Manufacturer & Supplier of High Quality Industrial Valves
Manufacturer & Supplier of High Quality Industrial Valves P (716) 681-5825 F (716) 706-1319 sales@lancevalves.com lancevalves.com A Reputation Earned by High Quality Industrial Valves We know you have
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
UNIDIRECTIONAL Knife Gate Valve
12/04/2016 UNIDIRECTIONAL Knife Gate Valve Unidirectional knife gate valve. Mechanically welded body. Various seat and packing materials available. Face to face dimension in accordance with standard, it
Bolted Bonnet Valves. (BL Series) Cast Steel. Cast Steel Bolted Bonnet Valves - BL Series
Cast Steel Bolted Bonnet Valves (BL Series) Gate Valve - BL5 Series Gate Valve Features Globe Valve - BL6 Series Globe Valve Features Swing Check Valve - BL7 Series Optional Features Model Numbers GATE
SERIES GVI AWWA C509/C515 RESILIENT SEATED GATE VALVES 2-48
SERIES GVI AWWA C509/C515 RESILIENT SEATED GATE VALVES 2-48 509-110 R6 OCT 2018 REPLACEABLE 0-RINGS Triple O-ring sealed with upper two O-rings replaceable with the valve fully open and subjected to the
BI-DIRECTIONAL KNIFE GATE VALVE
BI-DIRECTIONAL KNIFE GATE VALVE The model knife gate is a bi-directional valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on suspended
RAIMONDI. High pressure forged globe valves to guarantee the pressure envelope integrity on harsh services.
Fig. 6022-6025 RAIMONDI High pressure forged globe valves to guarantee the pressure envelope integrity on harsh services. Features Forged body materials of highest quality, all in compliance with ASME
Industrial Threaded Ball Valves
Industrial Threaded Ball Valves (Includes socket weld & buttweld ends) Carbon & Stainless Steel KITZ CORPORATION OF AMERICA INDUSTRIAL THREADED BALL VALVES Carbon and Stainless Steel CONTENTS Figure Number
HANCOCK GATE, GLOBE AND CHECK VALVES CAST STEEL
ANCOCK GATE, GOBE AND CECK VAVES CAST STEE A range of ASME Class 150, 300 and 600 bolted bonnet cast steel valves, with metal-to-metal seating in flanged or butt weld ends FEATURES Gate valves Internal
Model-1 Natural Gas Valves
Flanged End 285 Screwed Weld End Locking Devices KEROTEST Model-1 s Short Weld End Long Weld End Weld x Flange 500 / 740 Flanged End 500 / 740 Weld x Flange 285 Model-1 Short Weld End Standard Welding
AVK (WWE) BUTTERFLY VALVE DN (2" to 56") 75 (EVS)
AVK (WWE) BUTTERFLY VALVE DN 50 1400 (2" to 56") 75 (EVS) Wafer type Face to face dimension to ISO 5752 short, basic series 20 (BS 5155 wafer short, DIN 3202K1) Flange connection to ISO 70052 (BS EN 10922,
CHAMPION WAFER CHECK VALVES SIZE RANGE 2" 72" ASME CLASS MATERIALS: IRON CARBON STEEL STAINLESS STEEL ALUMINUM BRONZE ALLOY 20 MONEL NICKEL
CHAMPION WAFER CHECK VALVES SIZE RANGE 2" 72" ASME CLASS 125 2500 MATERIALS: IRON CARBON STEEL STAINLESS STEEL ALUMINUM BRONZE ALLOY 20 MONEL NICKEL CHAMPION VALVES, INC. DUAL DISC SPRING LOADED WAFER
BS 1452 Gr Gr. 420/ Gr. 420/ AB2 304 C C S S S S16. E mm
WAFER TYPE BUTTERFY VAVE SPECIFICATION FOR BS EN 1092-2 PN10 / PN16 FANGE MOUNTING FACE-TO-FACE DIMENSION TO ISO 5752 / BS 5155 / BS EN 593 EVER / WORM GEAR OPERATOR PRESSURE / TEMPERATURE RATINGS BFV-WB
BALL VALVES 4Evergreen Valve
BALL VALVES 4Evergreen Valve 4E represents Excellent quality, Excellent delivery, Excellent service and all at an Excellent price. 4E valve was founded by a group of enthusiastic people with more than
Sealing Test Pressure (MPa)
TRIPLE ECCENTRIC BUTTERFLY VALVE Triple Eccentric Butterfly Valve provides a tight shut-off. This geometry ensures that the disc seal contacts the body seat only at the final shut-off position without
CAST STEEL GATE VALVE
CAST STEEL GATE VALVE DESIGN CHARACTERISTICS OF API00 CAST STEEL GATE VALVE The design of thrust bearing makes valve opened easily and flexibly. Handwheel Nut Handwheel Stem Nut Retainer Stem Nut Lubricating
CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE FEATURES SPECIFICATIONS PRODUCT IDENTIFICATION SYSTEM PRODUCT DATA
CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE Silent check function Temperature -10 ~ +120 PRODUCT IDENTIFICATION SYSTEM 2 Disc Ductile iron GGG 40 3 Spring Stainless steel SUS304 4 Bush Bronze 1400
NON RETURN BRASS FLANGED AGA GAS APPROVED
NON RETURN BRASS FLANGED AGA GAS APPROVED ACTUATED MARINE STAINLESS STEEL 34 VALVES 36... BRASS BALL VALVES 37... AGA GAS APPROVED VALVES GATE VALVES 38... BRASS VALVES 39... RUBBER BELLOW, HOSECOCKS &
ACE VALVE COMPANY LIMITED
Gate & Globe Valves ACE COMPANY LIMITED ttp://www.acevalve.co.kr Mangdeokri, Juchonmyun, Gimhae, Gyeongnam, Korea. TEL +000 FAX +0~ Email acevalve@acevalve.co.kr omepage www.acevalve.co.kr 0.0. ACE CATALOG