Compact Cylinder/Double Acting, Single Acting Type. How to Order W D

Size: px
Start display at page:

Download "Compact Cylinder/Double Acting, Single Acting Type. How to Order W D"

Transcription

1 Series UA ompact ylinder/double Acting, Single Acting Type : ф1( 1 / Nom.), ф16( 5 / Nom.), ф( 3 / 4 Nom.), ф5(1nom.), ф3(1 1 / 4 Nom.), ф4(1 1 / Nom.), ф5(nom.), ф63( 1 / Nom.), ф(3 1 / 4 Nom.), ф1(4nom.) SPA SAVIN DSIN IT IT 1 BOR SIZS AUTO SIT APAB YINDRS FOR SPIA APPIATIONS MANUFATURIN RTIFID TO ISO 91&9 STANDARDS ow to Order ith Auto Switch UA UAD B 3 D B 3 D U4 S Built-in Magnet For details, please refer to page A-. Model Blank : Single Rod : Double Rod : Non-Rotating Type B : Through ole () A : Both nds Tapped For the Dimensions of A type please refer to page A-5. 1 : 1 ( 1 / Nom.) 16 : 16 ( 5 / Nom.) : ( 3 / 4 Nom.) 5 : 5 (1Nom.) 3 : 3 (1 1 / 4 Nom.) 4 : 4 (1 1 / Nom.) 5 : 5 (Nom.) 63 : 63 ( 1 / Nom.) : (3 1 / 4 Nom.) 1: 1 (4Nom.) ylinder Stroke For stroke refer to page Action D : Double Acting S : Single Acting/Spring Return T : Single Acting/Spring xtended Body Option(See list below) Blank: Standard : Rubber cushion M : Rod end male thread F : Rear boss mount Applicable Auto Switch Blank:ithout Auto Switch U4 : U4(Reed Swith) Suffix for lead wire exceeding 3m length. xample) U4 Number of Auto Switch Blank : pcs. S : 1 pc. Special Option Blank : Standard type 16 : opper-free PNUMATIS A - 1

2 Series UA Standard/Specifications Model/Standard Stroke Fluid Air Max. Operating Pressure PSI (9.9kgf/ cm ) Ambient and Fluid Temperature ~16 F (-1~ ) ubrication Not Required ushion None Rod nd Thread Female () Stroke Tolerance +1. mm (.39 inch) Mounting Through ole (Standard) Piston Speed 5~5 mm/sec (~ inch/sec) Body Option/Available - Standard - Optional Type ode Single Rod Double Rod Action Blank M M F FM F FM Blank M M Standard Double Acting (1/Nom.~3/4Nom.) (1 1 / 4Nom.~4Nom.) Type Single Spring return Acting Spring extended (1/Nom) ith Auto Double ( 5 / Nom.~1Nom.) Switch Acting (1 1 / 4Nom.~4Nom.) Note) Single Acting(Spring return / Spring extended) is optional. Double Acting Single Acting Single Double Non-Rotating Rear Boss Spring Spring Rod Type Rod Type Rod Type Mount Type Return Type xtended Type AP UAP A AS AM A A UARD UA AJ A UA ADM ADR AMR UAMR AST ~ ф1(1/nom.) ф16(5/nom.) ф(3/4nom.) ф5(1nom.) ф3(11/4nom.) ф4(11/nom.) ф5(nom.) ф63(1/nom.) ф(31/4nom.) ф1(4nom.) 5, 1,,, 5, 3, 35, 4, 45, 5, 5 5, 1,,, 5, 3, 35, 4, 45, 5, 5, 1,, 1,,, 5, 3, 35, 4, 45, 5, 5, 1,, Intermediate Stroke Standard Stroke 5, 1,,, 5, 3, 35, 4, 45, 5, 5, 1,,, 5, 3, 35, 4, 45, 5, 5, 1 1,,, 5, 5, 3, 35, 4, 45, 5, 5, 1 5, 1,,, 5, 5, 1,,, 5, 3, 35, 4, 45, 5 3, 35, 4, 45, 5, 5, 1, 5 _ 5, 1,,, 5, 3, 35, 4, 45, 5, 5 1,,, 5, 5, 3, 35, 4, 45, 5, 5, 1 _ 5, 1,,, 5, 3, 35, 4, 45, 5, 5, 1,, 1,,, 5, 5, 3, 35, 4, 45, 5, 5, 1,, Standard Stroke 5, 1, 5, 1,, 5, 3, 5, 3 1, _ 5, 1, _ 5, 1, 5, 1, A spacer of 5, 1, and mm is used for intermediate strokes between 55 and 1mm stroke(55, 6, 65...). (xample) UAB5-55D is produced by installing mm spacer in UAB5-5. 1, _ A - 11 PNUMATIS

3 Series UA Options Name Applicable Type ushion Rubber ushion/double Acting Only Rod nd MaleThread Optional Boss Mount Optional Non-Rotating Piston Rod Type Double Acting/Single Rod Type Only Minimum Operating Pressure (PSI) Type (1/Nom) (5/Nom) (3/4Nom) (1Nom ) (11/4Nom) (11/Nom) (Nom) (1/Nom) (31/4Nom) (4Nom) Double Acting (Single Rod) Single Acting (Spring Return, Spring xtended) autions 1 hen mounting, completely flush piping, be careful that dust and chips do not enter the cylinder. The piston rod load should always be aligned with the cylinder axis. ylinder installation requires accurate alignment. hen used as a stopper, avoid side loading of the piston rod. 3 Prevent damage to the piston rod. A damaged piston rod can lead to failure of the rod packing and result in cylinder failure. 4 hen disassembling, remove the retaining ring (-type) with special tool. (Assembling tool for -type retaining ring) Non-Rotating Rod Accuracy ( 3 / 4Nom.)(1Nom.) (1 1 / 4Nom.) (1 1 / Nom.) (Nom.) ( 1 / Nom.) Non-Rotating Rod Accuracy 1. Theoretical Force Single Acting (Ibs) (kgf) Double Acting Single Rod (Ibs) Action Spring Return Spring xtended Operating pressure(psi) Spring Force Spring xtended Spring Return Rod and Max. Position Position Axial oad ( 3 / 4Nom.) (1 1 / 4Nom.) (1 1 / Nom.) (Nom.) ( 3 / 4Nom.) (1 1 / 4Nom.) (1 1 / Nom.) (Nom.) Auto Switch Mounting Bracket/PART No. Mounting Band Note Applicable Auto Switch 1165 ( 1 / Nom, 5 / Nom, 3 / 4 Nom, 1Nom) ( 3 / 4 Nom,1 1 / 4 Nom, 1 1 / Nom, Nom ) B-1 B- Auto Switch Mounting Screw (M3.5 l) Square Nut Auto Switch Mounting Screw (M3.5 1l) Auto Switch Spacer Auto Switch Mounting Nut U4 Bore Rod Operating pressure PSI size direction OUT ф1( 1 / Nom.) IN OUT ф16( 5 / Nom.) IN OUT ф( 3 / 4 Nom.) IN OUT ф5(1nom.) IN OUT ф3(1 1 / 4 Nom.) IN OUT ф4(1 1 / Nom.) IN OUT 34 ф5(nom.) IN OUT ф63( 1 / Nom.) IN OUT ф(3 1 / 4 Nom.) IN OUT ф1(4nom.) IN OUT IN PNUMATIS A - 1

4 Series UA onstruction/parts ist Double Acting/Single Rod Type AP UAP A AS AM A A UARD UA AJ A UA Rod nd Male Thread Type Rear boss mount type ADM ADR AMR UAMR Parts ist No. Description Material Note No Description Material Note ylinder Tube Piston Piston Rod Aluminum Alloy Aluminum Alloy arbon Steel hromate 3(1 1 / 4 Nom)~1(4Nom),ard chrome Bushing Rod end nut A Bumper ead Bronze asting arbon steel Polyurethane rubber Only above ф5(nom.) Nickel Plated ollar Aluminum Bearing Alloy 1( 1 / Nom)~4(1 1 / Nom) B Bumper Polyurethane rubber Aluminum Alloy asting 5(Nom)~1(4Nom) Boss mount adapter Aluminum alloy ( 3 / 4 Nom)~1(4Nom) Retaining Ring arbon Tool Steel Phosphate asting AST ~ 1( 1 / Nom.)~5(1Nom.)Piston rod... One piece construction(stainless steel) Seals ist No Description Material Parts No. 1( 1 / Nom.) 16( 5 / Nom.) ( 3 / 4 Nom.) 5(1Nom.) 3(1 1 / 4 Nom.) 4(1 1 / Nom.) 5(Nom.) 63( 1 / Nom.) (3 1 / 4 Nom.) 1(4Nom.) Piston packing Rod packing NBR NBR NP-1 DYR-6 NP-16A DYR- NP-A DYR-1S NP-5A DYR-1 NP-3A DYR-16 NP-4A PDU-16Z NP-5A PDU-Z NP-63A PDU-Z NP-A PDU-5Z NP-1A PDU-3Z asket NBR SO A - 13 PNUMATIS

5 Series UA onstruction/parts ist Double Rod Type Non-Rotating Spring Return Type Spring xtended Type Parts ist No. Description Material Note No Description Material Note ylinder Tube Piston Piston Rod Aluminum Alloy Aluminum Alloy arbon Steel hromate Bushing Rod nd Nut A Bumper ead Bronze asting arbon Steel Polyurethane Rubber Only above ф5(nom) Nickel Plating ollar Aluminum Bearing Alloy B Bumper Polyurethane Rubber Aluminum Alloy asting Boss Mount Adapter Aluminum Alloy Retaining Ring arbon Tool Steel Phosphate oating 1( 1 / Nom.)~5(1Nom.)Piston rod... One piece construction(stainless steel) Seals ist No Description Material Parts No. 1( 1 / Nom.) 16( 5 / Nom.) ( 3 / 4 Nom.) 5(1Nom.) 3(1 1 / 4 Nom.) 4(1 1 / Nom.) 5(Nom.) 63( 1 / Nom.) (3 1 / 4 Nom.) 1(4Nom.) Piston Packing Rod Packing NBR NBR NP-1 DYR-6 NP-16A DYR- NP-A DYR-1S NP-5A DYR-1 NP-3A DYR-16 NP-4A PDU-16Z NP-5A PDU-Z NP-63A PDU-Z NP-A PDU-5Z NP-1A PDU-3Z asket NBR SO PNUMATIS A -

6 Series UA Double Acting/Single Rod Type : Dimensions :ф1~ф5 ( 1 / Nom.~1Nom.) type(both nds Tapped) Please refer to Page A-5. AP UAP Screw depth -фn Through hole 4-фO ounter bore A R S AS AM M±. V B+Stroke A+Stroke F 1-3 UNF (Port size) A A UARD UA Bore size ф1( 1 / Nom.) ф16( 5 / Nom.) ф( 3 / 4 Nom.) ф5(1nom.) Th AJ A UA ADM ADR AMR Rod nd Male Thread UAMR AST Rod nd Male Thread ~ Rod nd Nut Bore size ф1( 1 / Nom.) ф16( 5 / Nom.) ф( 3 / 4 Nom.) ф5(1nom.) #-3 UN #-3 UN #1-3 UNF 1/4- UNF Bore size ф1( 1 / Nom.) ф16( 5 / Nom.) ф( 3 / 4 Nom.) ф5(1nom.) Stroke Range 5~3 5~3 5~5 5~5 A B D F M N фo R S V #-3 UN #-3 UN #1-3 UNF 1/4- UNF Depth Depth Depth Depth A - PNUMATIS

7 Series UA Double Acting/Single Rod Type : Dimensions :ф3~ф1(1 1 / 4 Nom.~4 Nom.) Screw depth 4-фN Through hole -ф O ounter bore -P Port size F type(both nds Tapped) Please refer to Page A-5. фi Z M ±. M ±. ong Stroke (st or more) -P Post size B+Stroke A+Stroke Bore size (inch) ф3(1 1 / 4 Nom.) ф4(1 1 / Nom.) ф5(nom.) ф63( 1 / Nom.) ф(3 1 / 4 Nom.) ф1(4nom.) Th фt 5 Rod nd Male Thread Bore size(inch) ф3(1 1 / 4 Nom.) ф4(1 1 / Nom.) ф5(nom.), ф63( 1 / Nom.) ф(3 1 / 4 Nom.) ф1(4nom.) T Rod nd nut Bore size(inch) ф3(1 1 / 4 Nom.) /16-4 UNF (3.5) ф4(1 1 / Nom.) /-4 UNF (3.5) ф5(nom.) ф63( 1 / Nom.) 6 6 1/- UNF 1/- UNF 33.5(43.5) 33.5(43.5) ф(3 1 / 4 Nom.) /- UNF 43.5(53.5) ф1(4nom.) /4-16 UNF 43.5(53.5) ( ) : st or more Bore size Stroke range mm ф3(1 1 / 4 Nom.) ф4(1 1 / Nom.) ф5(nom.) ф63( 1 / Nom.) ф(3 1 / 4 Nom.) ф1(4nom.) 5 1~5 5,1, 5~5 5,1, 1~5 5,1, 1~5 5,1, 1~5 5,1, 1~5 5,1, A B D F I J M N фo P Z /16-4 UNF /-4 UNF /- UNF /- UNF /- UNF /4-16 UNF Depth 9Depth 11Depth Depth Depth Depth UNF 11.5 NPT1/" NPT1/" NPT1/4" 1 NPT1/4" NPT3/" NPT3/" PNUMATIS A - 16

8 Series UA Double Acting/Non-Rotating Piston Rod/Single Rod Type : Dimensions :ф~ф5 ( 3 / 4 Nom.~1 Nom.) Through ole type(both nds Tapped) Please refer to Page A-5. AP UAP ф9 A () Screw depth () Rod ross Section R S -фn Through hole 4-фO ounter Bore -1-3UNF Port Size F B+Stroke A+Stroke AS AM A A UARD UA AJ M ±. V A UA Rod nd Male Thread Rod nd Male Thread Th9 ф( 3 / 4 Nom.) ф5(1 Nom.) -.43 ADM ADR AMR UAMR AST Rod nd Nut ф( 3 / 4 Nom.) ф5(1 Nom.) 1 #1-3 UNF.5 1/4- UNF ~ Bore size Stroke range mm A B D F M N R S V ф( 3 / 4 Nom.) ф5(1 Nom.) 5~5 5~ #1-3 UNF 1/4- UNF A - 1 PNUMATIS

9 Series UA Double Acting/Non-Rotating Rod/Single Rod Type : Dimensions :ф3 (1 1 / 4 Nom.) type(both nds Tapped) Please refer to Page A-5. 5/16-4UNF Screw Depth 13 -ф5.5 Through ole ф9 -Bore Depth 19.5[.5] -NPT1/"(-1-3UNF).5[5.5] ф6 (ф16) ф16 34 ±. 45 ф Stroke 39+Stroke ( ) : Stroke - 5mm ф () Rod ross Section 34 ± /16-4 UNF Rod nd Nut PNUMATIS A -

10 Series UA Double Acting/Non-Rotating Piston Rod/Single Rod Type : Dimensions :ф4~ф63 (1 1 / Nom.~ 1 / Nom.) type(both nds Tapped) Please refer to Page A-5. AP UAP Screw depth 4-фN Through hole -фo ounter Bore -P Port Size F A фi AS () () Rod ross Section M ±. M ±. Z J B+Stroke A+Stroke AM A A UARD UA AJ ф4(1 1 / Nom) ф5(nom) ф63( 1 / Nom) Th A UA ADM ADR AMR Rod nd Male Thread Rod nd Nut Rod nd Male Thread ф4(1 1 / Nom) ф5(nom) ф63( 1 / Nom) /-4 UNF 1/- UNF 1/- UNF UAMR AST ~ Bore size Stroke range mm ф4(1 1 / Nom) ф5(nom) ф63( 1 / Nom) 5~5 5, 1 1~5 5, 1 1~5 5, 1 A B D F /-4 UNF /- UNF /- UNF 13 I J M N 5 фo P Depth 11Depth NPT1/" NPT1/4" 6 9 Depth1.5 NPT1/4" Th Z A - 19 PNUMATIS

11 Series UA Double Acting/Double Rod Type : Dimensions :ф~ф5 ( 3 / 4 Nom.~1 Nom.) type(both nds Tapped) Please refer to Page A-5. -фn Through hole Screw depth 4-фO ounter Bore Across Flats R S M ±. V -1-3UNF B+Stroke A+(Stroke) +Stroke Rod nd Male Thread - Rod nd Male Thread A ф( 3 / 4 Nom.) 63 ф5(1nom.) 4 1 #1-3 UNF 1/4- UNF Rod nd Nut Rod nd Nut A+(Stroke) +Stroke Bore size mm ф( 3 / 4 Nom.) ф5(1nom.) Stroke range mm 5~5 5~5 A B D M N #1-3 UNF /4- UNF фo 9Depth 9Depth R S V PNUMATIS A -

12 Series UA Double Acting/Double Rod Type : Dimensions :ф3~ф1 (1 1 / 4 Nom.~4 Nom.) type(both nds Tapped) Please refer to Page A-5. AP UAP A - Screw depth 4-фN Through hole AS фi -фo ounter Bore -P Across Flats AM A A Z M ±. UARD M ±. J B+Stroke A+(Stroke) +Stroke UA AJ A Rod nd Nut Rod nd Male Thread Rod nd Nut - Rod nd Male Thread UA ADM A+Stroke +Stroke ф3(1 1 / 4 Nom) ф4(1 1 / Nom) ф5(nom) ф63( 1 / Nom) ф(3 1 / 4 Nom) ф1(4nom) A /16-4 UNF 3/-4 UNF 1/- UNF 1/- UNF 5/- UNF 3/4-16 UNF ADR AMR UAMR AST ~ Bore size ф3(1 1 / 4 Nom) ф4(1 1 / Nom) ф5(nom) ф63( 1 / Nom) ф(3 1 / 4 Nom) ф1(4nom) Stroke range mm 5~3 1~5 1~5 1~5 1~5 1~5 A B D I J M N /16-4 UNF 3/-4 UNF 1/- UNF 1/- UNF 5/- UNF /4-16 UNF фo 9Depth 9Depth 11Depth Depth1.5 1Depth13.5 1Depth13.5 P Z 1-3 UNF NPT1/" NPT1/" NPT1/4" 5 1 NPT1/4".5 4 NPT3/" NPT3/" A - 1 PNUMATIS

13 Series UA Double Acting/Non-Rotating Piston Rod/Double Rod Type : Dimensions :ф ( 3 / 4 Nom.)~ф5 (1 Nom.) Through ole ф9 type(both nds Tapped) Please refer to Page A-5. - Screw depth -фn Through hole 4-фO ounter Bore -P Port Size Across Flats () (1) 1 фthg Rod ross Section M ±. V F B+Stroke +Stroke A+(Stroke) :ф3(1 1 / 4 Nom.) - Screw depth 4-фN Through hole -фo ounter Bore -P F () фi (1) Rod ross Section M ±. J1 Z M ±. B+Stroke +Stroke A+(Stroke) idth Across Flats Rod nd Male Thread Rod nd Nut - Rod nd Male Thread A ф(3/4nom.) 1 1 #1-3 UNF ф5(1nom.) 1/4- UNF ф3(1 1 / 4 Nom.) /16-4 UNF A+(Stroke) +Stroke ф(3/4nom.) ф5(1nom.) ф3(1 1 / 4 Nom.) Bore size Stroke range mm ф(3/4nom.) ф5(1nom.) ф3(1 1 / 4 Nom.) 5~5 5~5 5 1~5 A B D F I J 1 M N P R S Th9 Z V #1-3 UNF UNF /4- UNF UNF UNF /16-4 UNF NPT 1/ PNUMATIS A -

14 Series UA Double Acting/Non-Rotating Rod/Double Rod Type : Dimensions :ф4~ф63 (1 1 / Nom.~ 1 / Nom.) type(both nds Tapped) Please refer to Page A-5. AP UAP A () - Screw depth (Available on the Opposite Side (1) Rod ross Section фi M ±. 4-фN Through hole -фo ounter Bore 1 Z M ±. J фthg -P idth Across Flats B+Stroke +Stroke A+(Stroke) AS AM A A UARD UA AJ A UA ADM Rod nd Male Thread ADR Rod nd Nut - Rod nd Male Thread AMR A+(Stroke) +Stroke ф4(1 1 / Nom) ф5(nom) ф63( 1 / Nom) A /-4 UNF 1/- UNF 1/- UNF UAMR AST ~ Bore size Stroke range mm A B D I J 1 M N фo P Thg Z ф4(1 1 / Nom) ф5(nom) ф63( 1 / Nom) 5~5 1~5 1~ /-4 UNF 1/- UNF Depth 11Depth NPT1/" NPT1/4" 1/- UNF Depth1.5 NPT1/4" A - 3 PNUMATIS

15 Series UA Single Acting/Spring Return Type : Dimensions :ф ( 3 / 4 Nom.) type(both nds Tapped) Please refer to Page A-5. Screw depth -ф N Through ole 4-ф O ounter Bore V B F 1-3 UNF Port Size M ±. A ф( 3 / 4 Nom.) Th Rod nd Male Thread Rod nd Male Thread Rod nd Nut Bore size ф( 3 / 4 Nom.) 1 #1-3 UNF.5 Bore size ф( 3 / 4 Nom.) A B D F M N фo V 5st 1st 5st 1st #1-3 UNF Depth 36 PNUMATIS A - 4

16 Series UA Single Acting/Single Rod/Spring Return Type : Dimensions :ф3 (1-1 / 4 Nom.) ~ф5 (Nom.) Through ole ф9 type(both nds Tapped) Please refer to Page A-5. AP UAP Screw Depth 4-фN Through ole -фo ounter Bore P F A фi Port Size AS Z M ±. AM A A M ±. J B A UARD UA AJ ф3(1 1 / 4 Nom) ф4(1 1 / Nom) ф5(nom) Thg A UA ADM ADR AMR Rod nd Male Thread UAMR Rod nd Male Thread AST Rod nd Nut ф3(1 1 / 4 Nom) ф4(1 1 / Nom) ф5(nom) /16-4 UNF 3/-4 UNF 1/- UNF 33.5 ~ ф3(1 1 / 4 Nom) A B F P D I J M N фo Z 5st 1st 5st 1st 5st 1st 5st 1st ф4(1 1 / Nom) ф5(nom) /16-4 UNF Depth NPT1/ 49.5 UNF 3/-4 UNF Depth NPT 1/ /- UNF Depth - NPT1/4 1 A - 5 PNUMATIS

17 Series UA Single Acting/Single Rod/Spring xtended Type : Dimensions :ф ( 3 / 4 Nom.) Through ole ф9 type(both nds Tapped) Please refer to Page A-5. Screw Depth -фn Through ole 4-фO ounter Bore M ±. V 1-3 UNF Port Size B A Th9 ф(3/4 Nom) Rod nd Male Thead Rod nd Nut Rod nd Male Thead 5st 1st ф(3/4 Nom) 1 #1-3 UNF 3.5 ф(3/4 Nom) A B D M N фo 5st 1st 5st 1st 5st 1st #1-3 UNF Depth V PNUMATIS A - 6

18 Series UA Single Acting/Single Rod/Spring xtended Type : Dimensions :ф3(1 1 / 4 Nom)~ф5(Nom) type(both nds Tapped) Please refer to Page A-5. AP UAP Screw Depth -фn Through ole 4-фO ounter Bore P Port Size A фi AS Z M ±. AM A A M ±. J A B UARD UA AJ ф3(1 1 / 4 Nom) ф4(1 1 / Nom) ф5(nom) Th A UA ADM ADR Rod nd Male Thread AMR Rod nd Nut Rod nd Male Thread ф3(1 1 / 4 Nom) ф4(1 1 / Nom) ф5(nom) /16-4 UNF 3/-4 UNF 1/- UNF 5st 1st st UAMR AST ~ A B P D I J M N фo Z 5st 1st 5st 1st 5st 1st 5st 1st 5st 1st ф3(1 1 / 4 Nom) /16-4 UNF Depth 1-3UNF NPT 1/ ф4(1 1 / Nom) /-4 UNF Depth NPT 1/ ф5(nom) /- UNF Depth - NPT 1/ A - PNUMATIS

With Auto Switch/Double Acting Type, Single Acting Type. Bore Size (mm) : ф12, ф16, ф20, ф25, ф32, ф40, ф50, ф63, ф80, ф100. Symbol.

With Auto Switch/Double Acting Type, Single Acting Type. Bore Size (mm) : ф12, ф16, ф20, ф25, ф32, ф40, ф50, ф63, ф80, ф100. Symbol. With Auto witch/double Acting Type, ingle Acting Type Bore ize : ф, ф16,,,,,,, ф, ф PA AVIN DIN IT WIT BOR IZ AUTO WIT APAB YINDR FOR PIA APPIATION MANUFATURIN RTIFID TO IO 91&9 TANDARD ymbol Double Acting

More information

Series AXR. Direct Mounting Cylinder/Double Acting Single Rod. Bore size(mm) : ф20, ф25, ф32, ф40. How to Order A - 98

Series AXR. Direct Mounting Cylinder/Double Acting Single Rod. Bore size(mm) : ф20, ф25, ф32, ф40. How to Order A - 98 Direct Cylinder/Double Acting Single Rod Bore size(mm) : ф2, ф25, ф32, ф4 AXRA Type STAINLESS STEEL BODY HIGH CYCLE LIFE LOW BREAKAWAY MAGNET STANDARD FOR AUTO SWITCH BUMPERS STANDARD DESIGNED FOR NON-LUBRICATED

More information

Rod end male thread. With rubber bumper 056(9/16") 075(3/4") 106(1 1/16") 150(1 1/2") 250(2 1/2") 300(3")

Rod end male thread. With rubber bumper 056(9/16) 075(3/4) 106(1 1/16) 150(1 1/2) 250(2 1/2) 300(3) T.ID0-1 New ompact ylinder Series NQ8 ore size: 06(9/16 ),(/ ),106(1 1/16 ),(1 1/ ) 00( ),0( 1/ ),00( ),00( ) Now available in 00 ( ) and 00 ( ) bore sizes Standard type ctuation Style uilt-in magnet Rod

More information

Series AXS. Standard Type/Single Acting:Spring Return, Spring Extended. Bore Size(mm) : ф20, ф25, ф32, ф40. How to Order A - 68

Series AXS. Standard Type/Single Acting:Spring Return, Spring Extended. Bore Size(mm) : ф20, ф25, ф32, ф40. How to Order A - 68 tandard ype/ingle Acting:pring Return, pring Extended (mm) : ф2, ф25, ф32, ф4 AILE EEL BODY HIH CYCLE LIFE LOW BREAKAWAY UMEROU MOUI OPIO MAE ADARD FOR AUO WICH BUMPER ADARD DEIED FOR O-LUBRICAED ERVICE

More information

Miniature Guide Rod Cylinder ±0.1. Mounting from 2 directions

Miniature Guide Rod Cylinder ±0.1. Mounting from 2 directions Miniature Guide Rod Cylinder Series Non-rotating accuracy : Height ±0.1 Mounting from 2 directions idth Overall length Two auto switches can be mounted even for mm strokes Integral wiring/piping to one

More information

Compact Hydraulic Cylinder. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order Z73. Bore size. 20mm 25mm 32mm 40mm 50mm 63mm 80mm 100mm

Compact Hydraulic Cylinder. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order Z73. Bore size. 20mm 25mm 32mm 40mm 50mm 63mm 80mm 100mm ompact ydraulic ylinder MPa Series KG ø, ø, ø, ø, ø, ø, ø, ø0 With uto Switch With auto switch (built-in magnet) KG DKG Mounting: asic type 0 ore size ow to Order mm mm mm mm mm mm mm 0mm Z3 Refer to "uto

More information

L & S Series Linear Slides

L & S Series Linear Slides & S Series inear Slides asic Selection S Series (short) single bearing block design, short overall length. (Photo this page) Series (long) double bearing block design, increased bearing support. (Photo

More information

How to Order. Nil M. Action S T. Load voltage Wiring. M9NV 5 V, 12 V 3-wire (PNP) M9PV 12 V. F9NWV 5 V, 12 V 3-wire (PNP) F9PWV

How to Order. Nil M. Action S T. Load voltage Wiring. M9NV 5 V, 12 V 3-wire (PNP) M9PV 12 V. F9NWV 5 V, 12 V 3-wire (PNP) F9PWV ompact ylinder: Standard Type Single cting, Single Rod, Spring Return/Extend Series QS ø, ø, ø, ø How to Order QS S QS S FWV S uilt-in magnet Mounting style Through-hole/oth ends tapped common (Standard)

More information

KNOCK CYLINDERS CONTENTS ACTUATORS GENERAL CATALOG. Caution KNOCK CYLINDERS

KNOCK CYLINDERS CONTENTS ACTUATORS GENERAL CATALOG. Caution KNOCK CYLINDERS CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG CONTENTS Features/Introductions of Variations 79 Double Acting Type Specifications 81 Order s 82 Inner Construction and Major Parts 83 Dimensions

More information

Series ADR. Double Rod Cylinder W1H ADR M Bore Size : ф10, ф16, ф20, ф25. How to Order A ACP UACP AM2 AM AL ALX ARD AQ2 AGX GX ADM ADR

Series ADR. Double Rod Cylinder W1H ADR M Bore Size : ф10, ф16, ф20, ф25. How to Order A ACP UACP AM2 AM AL ALX ARD AQ2 AGX GX ADM ADR Double Rod Cylinder Bore Size : ф10, ф16, ф, ф25 HIGH ATERA OAD CAPABIITY ADJUSTABE STROKE IS AVAIABE A THIN AND COMPACT DOUBE ROD CYINDER BA BUSHING OPTION AUTO SWITCH READY NON-UBE SERVICE STAND. A 2

More information

Series CQS. Compact Cylinder. Square body shape gives you flexibility for machine design

Series CQS. Compact Cylinder. Square body shape gives you flexibility for machine design ompact ylinder Series QS ø, ø, ø, ø Ideal for machine designs with small space requirements The - and -M auto switches will not protrude from switch mounting groove. Square body shape gives you flexibility

More information

Features. Specification. Model. Acting type. Tube I.D. (mm) Stroke (mm) 5, 10, 15 5, 10, 15, 20. Port size. Proof pressure.

Features. Specification. Model. Acting type. Tube I.D. (mm) Stroke (mm) 5, 10, 15 5, 10, 15, 20. Port size. Proof pressure. MCGS series ø6, ø0 Features Multi-ports as standard enabling both direction mounting. Non-rotating accuracy ± 0. mbedding type sensors. The sensor cable will be in the same direction as the piping tube

More information

Low Friction Cylinders

Low Friction Cylinders ow riction ylinders Series Metal Seal Type P.112 Series QT Standard type Q ateral load resisting type (uilt-in ball bushing) ompact ow riction ylinder Series Q Operating pressure range (MPa) 0.00 to 0.

More information

Mechanically Jointed Rodless Cylinder High Precision Guide Type. How to Order 16 G 300 L M9N. Stroke. Refer to Standard Stroke table.

Mechanically Jointed Rodless Cylinder High Precision Guide Type. How to Order 16 G 300 L M9N. Stroke. Refer to Standard Stroke table. Mechanically Jointed Rodless ylinder igh Precision uide Type eries MY/T ø, ø, ø T MY uide type igh precision guide with single axis igh precision guide with double axis ymbol Nil TN TF Type M thread Rc

More information

Compact Hydraulic Cylinder

Compact Hydraulic Cylinder ompact Hydraulic ylinder Series HQ HQ Series HQ HK HN HM HS H2 H Nominal pressure:. MPa ore size :,,,,,, . MPa ompact Hydraulic ylinder Double cting/single Rod Series H Q ø, ø, ø, ø, ø, ø, ø With uto Switch

More information

Precision Cylinder. MTS Series. ø8, ø12, ø16, ø20, ø25, ø32, ø40 MXH MXS MXQ MXQ MXF MXW MXJ MXP MXY MTS D- -X. Series Variations MTS8

Precision Cylinder. MTS Series. ø8, ø12, ø16, ø20, ø25, ø32, ø40 MXH MXS MXQ MXQ MXF MXW MXJ MXP MXY MTS D- -X. Series Variations MTS8 Precision Cylinder Series, ø, ø6, ø, ø, ø, ø MXS Series Variations Model 8 Standard stroke (mm) 7 7 Rod end configuration Cushion Rubber bumper End lock Made to Order Rod Variable stroke/ through-hole

More information

Standard Type Dual-Rod Cylinder. ø6, ø10, ø15, ø20, ø25, ø32. How to Order

Standard Type Dual-Rod Cylinder. ø6, ø10, ø15, ø20, ø25, ø32. How to Order Standard Type ual-rod ylinder Series ø, ø, ø, ø, ø2, ø32 ompact Type J M L M earing type Slide bearing all bushing bearing How to Order 0 Y7W S Number of auto switches Nil 2 pcs. S pc. n "n" pcs. ore size/standard

More information

Compact Guide Cylinder Series MGQ

Compact Guide Cylinder Series MGQ Compact Guide Cylinder Series ø, ø, ø, ø, ø, ø, ø, ø, ø, ø0 ir cylinder with guide integrated that has achieved anti-lateral load and high non-rotating accuracy. Space-saving cylinder. Suitable as stoppers

More information

Air Slide Table. ø8, ø12, ø16, ø20, ø25. Linear guide table provides long stroke. Table rigidity is constant throughout entire stroke.

Air Slide Table. ø8, ø12, ø16, ø20, ø25. Linear guide table provides long stroke. Table rigidity is constant throughout entire stroke. ir Slide Table Series MX ø, ø2, ø, ø2, ø2 inear guide table provides long stroke. Table rigidity is constant throughout entire stroke. ong stroke (Max. mm) inear guide provides long stroke, and it obtains

More information

ACT-132. DC/91000/M, DC/93000/M Single acting Ø mm DC/9 / /

ACT-132. DC/91000/M, DC/93000/M Single acting Ø mm DC/9 / / Series 90000 ompact Actuators D/91000/, D/93000/ Single acting Ø 12... 63 mm ne third the basic length of a corresponding IS/VDA model ow friction, long life seal design Fully non-corrodible specification

More information

Series ADQCP. Compact Cylinder for Intense-Magnetism Resistant ADQCP. Air Cylinder. Bore Size (mm) : ф50, ф63. How to Order A - 197

Series ADQCP. Compact Cylinder for Intense-Magnetism Resistant ADQCP. Air Cylinder. Bore Size (mm) : ф50, ф63. How to Order A - 197 Series DQCP Compact Cylinder for Intense-Magnetism Resistant ore Size : ф0, FOR WELDING MCHINE/INTENSE MGNETIC FIELD SVE SPCING COMPCT DESIGN MNUFCTURING CERTIFIED TO ISO 9001/9002 STNDRDS ir Cylinder

More information

Compact Cylinder with Lock

Compact Cylinder with Lock ompact ylinder with ock Series Q ø, ø, ø, ø, ø, ø, ø, ø J2 2 1 1 N N N NS S Q RQ U P 1 rop prevention when the pressure of air source is decreased or the residual pressure is released. rop prevention for

More information

Series Basic Type. ø10, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. Series MY1B

Series Basic Type. ø10, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. Series MY1B MY Series asic Type ø, ø, ø, ø, ø, ø, ø, ø, ø, ø0 Series MY earing Minimizing the unit size (dimensions) and combination with other guides is possible. efore Operating Series MY Maximum llowable Moment/Maximum

More information

Reduced by Max. 58% Maximum allowable stroke when using clevis bracket CS2 CS Stroke (mm)

Reduced by Max. 58% Maximum allowable stroke when using clevis bracket CS2 CS Stroke (mm) ir ylinder 7. kg eight Reduced by Max. 58% ew arge ore Sizes ø15, ø, ø ighter installation achieved by reducing weight. Die cast rod cover and head cover used to achieve greater weight reduction. Rod bore

More information

Specifications. Standard Stroke Table. Bore size (mm) Number of axes 200, 300, 400, 500,

Specifications. Standard Stroke Table. Bore size (mm) Number of axes 200, 300, 400, 500, Series REH Specifications Bore size mm Fluid ction Maximum operating pressure Minimum operating pressure Proof pressure mbient and fluid temperature Piston speed ubrication Stroke length tolerance Piping

More information

Series MGPS. Compact Guide Cylinder: ø50, ø80 MGP S Z73. How to Order. Applicable auto switches. Compact Guide Cylinder.

Series MGPS. Compact Guide Cylinder: ø50, ø80 MGP S Z73. How to Order. Applicable auto switches. Compact Guide Cylinder. Compact Guide Cylinder: Series S ø, Compact Guide Cylinder Compact guide cylinder Heavy duty guide rod type S Z73 mm mm How to Order Number of auto switches Nil S 2 pcs. 1 pc. Auto switch type Nil Without

More information

Pin Cylinders. Series CJP2/CJP. 2 auto switches can even be mounted on a cylinder with ø4 bore size (5 mm stroke). One-touch fitting can be connected.

Pin Cylinders. Series CJP2/CJP. 2 auto switches can even be mounted on a cylinder with ø4 bore size (5 mm stroke). One-touch fitting can be connected. Pin ylinders eries JP/JP auto switches can even be mounted on a cylinder with ø ( mm stroke). uto switch One-touch fitting can be connected. (Panel mount type) ø One-touch fitting, miniature fitting, and

More information

SMD2. Compact cylinder. Space saving structure 6, 10, 16 20, 25, 32. Simple square design. Switch integrated. Easy centering. Precise installation

SMD2. Compact cylinder. Space saving structure 6, 10, 16 20, 25, 32. Simple square design. Switch integrated. Easy centering. Precise installation pace saving structure Overview his direct mount cylinder is a high rigidity/small square air cylinder with excellent installation accuracy and multisurface direct mount. he square shaped body improves

More information

CJ2-Z. Cushion. Rubber bumper (Standard) Air cushion

CJ2-Z. Cushion. Rubber bumper (Standard) Air cushion eries ow to Order 1/ /22 J2 ø1, ø ir ylinder Ro lean series 1 ushion Rubber bumper (tandard) ir cushion 1 J 2 L R M9W 21 J 2 L R M9W opper, fluorine and siliconefree + Low particle generation 21 22 Vacuum

More information

Compact Cylinder. ISO Standard (21287) C55 Series. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. RoHS C85 C75 C96 C96Y C96K C55

Compact Cylinder. ISO Standard (21287) C55 Series. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. RoHS C85 C75 C96 C96Y C96K C55 55 96Y 96K 96 P96K P96 75R 75K-S/T 75K 75-S/T 75W 75 85R 85K-S/T 85K 85-S/T 85W 85 ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 Related ade to uto Products Order Switch ompact ylinder 55 Series ISO Standard

More information

Compact Guide Cylinder

Compact Guide Cylinder Compact Guide Cylinder Series ø, ø, ø, ø, ø, ø, ø, ø, ø, ø ir cylinder with guide integrated that has achieved anti-lateral load and high non-rotating accuracy. Space-saving cylinder. Suitable as stoppers

More information

Compact Cylinder. Series SZ. Specifications. Features: Features. Ø12mm - 100mm

Compact Cylinder. Series SZ. Specifications. Features: Features. Ø12mm - 100mm SZ Compact Cylinder Specifications Features Type Series Compact Cylinder SZ Configurations SZ6 Double Acting, Single Rod, SZD6 Double Acting, Double Rod, SZV6 Double Acting, Non-Rotating, SZ7 Single Acting,

More information

ISO Standard Hydraulic Cylinder

ISO Standard Hydraulic Cylinder ISO Standard ydraulic ylinder Series S/SG Series S Q N Nominal pressure: S Pa ore size :,,,, Related quipment Series SG Nominal pressure: - Pa ore size : 3,,,,, 51 ISO Standard ydraulic ylinder Series

More information

NEN Series NFPA Aluminum Cylinders

NEN Series NFPA Aluminum Cylinders NEN Series NP luminum ylinders 1-1/2" to 4" bore sizes ompetitively priced Magnetic piston standard djustable cushion standard Sleeve nut construction standard Stocked strokes Technical data Medium: iltered

More information

Series MK ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63

Series MK ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63 otary lamp ylinder/standard Series MK ø, ø, ø, ø, ø, ø, ø5, ø ow to Order MK 1 3 S otary clamp cylinder Mounting Symbol Style ore size Through hole & both ends tapped (Standard) ø, ø oth ends tapped Through

More information

Air Cylinder: Standard Type Double Acting, Single Rod. How to Order. Standard stroke (mm) ø6 15, 30, 45, 60. Cushion Nil A

Air Cylinder: Standard Type Double Acting, Single Rod. How to Order. Standard stroke (mm) ø6 15, 30, 45, 60. Cushion Nil A ø, ø, ø L F D Without auto switch With auto switch style asic style Axial foot style Rod side flange style Double clevis style (Except ø) ore size mm mm mm How to Order Standard stroke (mm) ø,,, ø,,,,

More information

Standard strokes (for all diameters) Stroke tolerance (ISO 15552)

Standard strokes (for all diameters) Stroke tolerance (ISO 15552) Series 19-192 Cylinders according to standard ISO 12 COIHT Construction characteristics nd plates Rod Barrel Rod-guide bushing Piston Seals Cushion adjusting screws die-casting aluminium C chromed steel

More information

3 Position Cylinder. RZQ Series. Provides intermediate stop mechanism. ø32, ø40, ø50, ø63. 2-stage stroke enabled with a small increase in length

3 Position Cylinder. RZQ Series. Provides intermediate stop mechanism. ø32, ø40, ø50, ø63. 2-stage stroke enabled with a small increase in length Position ylinder Series ø, ø, ø, ø Provides intermediate stop mechanism 2-stage stroke enabled with a small increase in length Overall length of cylinder tube DQ2 Full stroke First-stage stroke dditional

More information

/ ø6, ø10, ø16, ø20 A table cylinder suitable for short pitch mounting

/ ø6, ø10, ø16, ø20 A table cylinder suitable for short pitch mounting roduces a table cylinder non-rotating accuracy MXH / ø, ø, ø1, ø A table cylinder suitable for short pitch mounting Application example Auto switches offer numerous variations Reed switches, solid state

More information

Series 25A-CJ2. Air Cylinder: Standard Type Double Acting, Single Rod. ø10, ø16 25A. How to Order. Auto switch mounting type

Series 25A-CJ2. Air Cylinder: Standard Type Double Acting, Single Rod. ø10, ø16 25A. How to Order. Auto switch mounting type Series -J2 ø0, ø6 magnet for switch, auto switch cannot be mounted. E M asic ouble-side bossed ouble clevis Single foot ouble foot ore size 0 0 mm 6 6 mm J2 6 60 Z M9W bracket is shipped together with

More information

Round Head and Square Head Tie Rod Cylinders

Round Head and Square Head Tie Rod Cylinders S5-7-R 5-7 Round Head and Square Head Tie Rod ylinders Features & Benefits.... General, Standard Ratings.... onstruction Information.... How a Longstroke is built odel Number hart.... How to Order Option

More information

Industrial Cylinder Products Hydraulic and Pneumatic Cylinders. Catalog (01/11)

Industrial Cylinder Products Hydraulic and Pneumatic Cylinders. Catalog (01/11) Industrial ylinder Products Hydraulic and Pneumatic ylinders atalog 00- (0/) Pneumatic ylinders Index Page Series, Heavy Duty, 0 P.S.I. ccessories - vailable Mountings and Specifications ushion Data -

More information

Low Profile Slide Table Series MXF ø8, ø12, ø16, ø20

Low Profile Slide Table Series MXF ø8, ø12, ø16, ø20 Low Profile Slide Table Series XF ø, ø, ø1, ø Low-profile and compact type, air slide table with the construction of guide and cylinder aligned in parallel. eat appearance Protecting stopper section with

More information

Compact Cylinder: Large Bore Size Type Double Acting, Double Rod. How to Order. Cushion C Rubber bumper. Action. D Double acting

Compact Cylinder: Large Bore Size Type Double Acting, Double Rod. How to Order. Cushion C Rubber bumper. Action. D Double acting Compact Cylinder: Large Bore Size Type Double Acting, Double Rod Series CQ2W ø, ø, ø, ø, ø Without auto switch With auto switch B Built-in magnet CQ2WB CDQ2WB Double rod ounting style Through-hole/Both

More information

Series NCM. Air Cylinder. Now available in 8 different bore sizes, 7/16" to 2".

Series NCM. Air Cylinder. Now available in 8 different bore sizes, 7/16 to 2. ir Cylinder Series NCM Now available in 8 different bore sizes, 7/16" to 2". 5 ctuation options available: Double cting, Single Rod Double cting, Double Rod Non-rotating Rod Single cting, Spring Return

More information

Linear slide cylinder Double acting single rod type. Bore size: 4.5, 6, 8. Descriptions Bore size mm

Linear slide cylinder Double acting single rod type. Bore size: 4.5, 6, 8. Descriptions Bore size mm Linear slide cylinder Double acting single rod type LCM Series Bore size:.5, 6, 8 JIS symbol Specifications Descriptions LCM Bore size mm.5 6 8 Actuation Double acting Working fluid Compressed air Max.

More information

Air Slide Table. ø8, ø12, ø16, ø20, ø25. Linear guide table provides long stroke. Table rigidity is constant throughout entire stroke.

Air Slide Table. ø8, ø12, ø16, ø20, ø25. Linear guide table provides long stroke. Table rigidity is constant throughout entire stroke. ir Slide Table Series MX ø, ø2, ø, ø2, ø2 inear guide table provides long stroke. Table rigidity is constant throughout entire stroke. ong stroke (Max. mm) inear guide provides long stroke, and it obtains

More information

Compact cylinders. Fixing dimensions are compliant to norm ISO 6431 or UNITOP. Suitable for standard fixing elements

Compact cylinders. Fixing dimensions are compliant to norm ISO 6431 or UNITOP. Suitable for standard fixing elements ompact cylinders Fixing dimensions are compliant to norm 431 or Suitable for standard fixing elements igh reliability and long lifetime Standard magnetic version Special strokes on request aterials arrel:

More information

Mechanically Jointed Rodless Cylinders

Mechanically Jointed Rodless Cylinders Mechanically Jointed Rodless Cylinders MY Series Basic short type (Rubber bumper) MY Series Bore sizes ø, ø, ø0 added MYB MY Basic standard type (ir cushion) MYB MYB Series MYM MYC MY MY T Bore sizes ø,

More information

Medium Duty Hydraulic Cylinders Series 3L

Medium Duty Hydraulic Cylinders Series 3L Medium Duty Hydraulic ylinders Series L Medium Duty Service Industrial Tie od onstruction Nominal Pressure 000 PSI Depending on ore Size Standard ore Sizes " through " Piston od Diameters /" through -/"

More information

240% 19% reduced. Compact Slide. MXH Series. Improved by up to. With new high rigidity linear guide. 369g. ø6, ø10, ø16, ø g.

240% 19% reduced. Compact Slide. MXH Series. Improved by up to. With new high rigidity linear guide. 369g. ø6, ø10, ø16, ø g. Compact Slide Series ø, ø, ø, ø RoHS Allowable moment MXS Improved by up to MXQ MXQ 2% MXF MXW MXJ MXP MXY With new high rigidity linear guide MTS Allowable moment improvement illustrated below Allowable

More information

3 Position Cylinder. ø32, ø40, ø50, ø63 RZQ CDQ2. Bore size (mm)

3 Position Cylinder. ø32, ø40, ø50, ø63 RZQ CDQ2. Bore size (mm) Position ylinder Series ø, ø, ø, ø Provides intermediate stop mechanism 2-stage stroke enabled with a small increase in length Overall length of cylinder tube First-stage stroke Full stroke dditional cylinder

More information

Parker Series 2A Air Cylinder

Parker Series 2A Air Cylinder Parker ir ylinder hen the job calls for reliable, heavy-duty performance, specify. 00,000 psi yield strength chrome-plated, case-hardened piston rod.,000 psi yield strength rod-end stud with rolled threads.

More information

Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable

Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable N304 Air Cylinder NCA1 Series NFPA Interchangeable Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable NFPA Interchangable Air Cylinder

More information

Features. Specification. Model. Tube I.D. (mm) 40,50,63 80, Medium. Proof pressure. Ambient temperature. Available speed range

Features. Specification. Model. Tube I.D. (mm) 40,50,63 80, Medium. Proof pressure. Ambient temperature. Available speed range series Features Non lubrication Special housing and bushing enables self lubrication of piston rod. High quality long service life Hard anodised aluminium cylinder tubes offer a high resistance to corrosion

More information

Mechanically Jointed Rodless Cylinders

Mechanically Jointed Rodless Cylinders Mechanically Jointed Rodless Cylinders Basic short type (Rubber bumper) Series MYA New NEW Bore sizes ø0, ø, ø0 added Basic standard type (Air cushion) Series MYB NEW Bore sizes ø0, ø, ø0 added Slide bearing

More information

6 Cylinder stroke. Standard stroke Bore size Ø12 Ø16. Action 75, 100 Ø50 Ø63 Ø80 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, Ø100 75, 100 Ø125

6 Cylinder stroke. Standard stroke Bore size Ø12 Ø16. Action 75, 100 Ø50 Ø63 Ø80 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, Ø100 75, 100 Ø125 Symbol Features Ideal for clamping, press-in and under short stroke condition. Can be installed even in a narrow space with a shorter length in axial thrust direction. Easy installation only with bolts.

More information

Free Mount Cylinder. Series. Series CU CAT.EUS20-95 B -UK. Space-saving. Auto Switch Capable P. 4, 23, 37 P. 45 P. 43

Free Mount Cylinder. Series. Series CU CAT.EUS20-95 B -UK. Space-saving. Auto Switch Capable P. 4, 23, 37 P. 45 P. 43 CAT.EUS- B -UK Free Mount Cylinder A space-saving air cylinder with multiple surfaces capable of direct mounting. Offered in many variations. Space-saving The multiple surface direct mounted rectangular

More information

Series MBB ø32, ø40, ø50, ø63, ø80, ø100

Series MBB ø32, ø40, ø50, ø63, ø80, ø100 Air Cylinder/End ock Series ø, ø, ø, ø, ø, ø ow to Order Standard ith auto switch MD A F G C D T uilt-in magnet Mounting asic/ithout bracket Axial foot Front flange Rear flange Single clevis Double clevis

More information

ROD SLIDERS INDEX ACTUATORS GENERAL CATALOG. Characteristics 779. Handling Instructions, and Precautions 783

ROD SLIDERS INDEX ACTUATORS GENERAL CATALOG. Characteristics 779. Handling Instructions, and Precautions 783 Presenting our CAD drawing data catalog ACTUATORS GENERAL CATALOG ROD SLIDERS INDEX Characteristics 779 Handling Instructions, and Precautions 783 Standard Cylinders Specifications 785 Order 78 Dimensions

More information

ACTUATORS GENERAL CATALOG

ACTUATORS GENERAL CATALOG CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG ROTARY ACTUATORS PISTON TYPE SERIES CONTENTS Features 1223 Specifications 1224 Inner Construction, Major Parts and Materials 1226 Order

More information

Free Mount Cylinder. Series CU. A space-saving air cylinder with multiple surfaces capable of mounting directly. Offered in rich variations.

Free Mount Cylinder. Series CU. A space-saving air cylinder with multiple surfaces capable of mounting directly. Offered in rich variations. Free Mount Cylinder Series CU A space-saving air cylinder with multiple surfaces capable of mounting directly. Offered in rich variations. Space-saving The multiple surface direct mounting with a square

More information

Features. Specification. Model. Acting type. Tube I.D. (mm) 20,25 32,40,50,63,80,100. Port size M5 0.8 G1/8. Proof pressure.

Features. Specification. Model. Acting type. Tube I.D. (mm) 20,25 32,40,50,63,80,100. Port size M5 0.8 G1/8. Proof pressure. series Table for standard stroke Stroke (mm) ø20,25 5,10,15,20,25,30,40,50,60,80,100,200 ø32,40 5,10,15,20,25,30,40,50,60,80,100,200,300 ø50,63 10,15,20,25,30,40,50,60,80,100,200,300,400 ø80,100 15,20,25,30,40,50,60,80,100,200,300,400,500

More information

Position locking clamp cylinder. UCAC2 Series. Bore size: ø50, ø63. Double acting single rod type

Position locking clamp cylinder. UCAC2 Series. Bore size: ø50, ø63. Double acting single rod type Position locking clamp cylinder U2 Series : ø50, ø63 XXXXX Series Specifications JIS symbol Descriptions U2 mm ø50 ø63 ctuation Double acting Working fluid ompressed air Max. working pressure MPa 1.0 Min.

More information

Information. Electric Actuator/Rod Type. Added size 63 to the LEY series! Series LEY AC Servo Motor (400 W) Size: 63. RoHS

Information. Electric Actuator/Rod Type. Added size 63 to the LEY series! Series LEY AC Servo Motor (400 W) Size: 63. RoHS Information SC Corporation Akihabara UDX 1F, 4-14-1, Sotokanda, Chiyoda-ku, Tokyo 1-21, JAPAN http://www.smcworld.com 12 SC Corporation All Rights Reserved Electric Actuator/Rod Type Series EY AC Servo

More information

APCO CVS-250/250A SWING CHECK VALVES

APCO CVS-250/250A SWING CHECK VALVES BULLETIN 250 NOVEMBER 2014 APO VS-250/250A SWING EK VALVES Design and onstruction APO VS-250/250A Swing heck Valves are used to prevent the backflow of fluid by closing before flow reversal. They are installed

More information

A SERIES. Double-Acting. Pneumatic Valve Actuator TECHNICAL BROCHURE. Designed & engineered for severe-service applications

A SERIES. Double-Acting. Pneumatic Valve Actuator TECHNICAL BROCHURE. Designed & engineered for severe-service applications A SRIS Double-Acting Pneumatic Valve Actuator Designed & engineered for severe-service applications Service and support www.cowandynamics.com A SRIS Design & Materials Barrel Seals Nitrile O -ring standard.

More information

ACTUATORS GENERAL CATALOG

ACTUATORS GENERAL CATALOG CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG ROTARY ACTUATORS VANE TYPE SERIES CONTENTS RAN (Standard Type) Basic Model and Configuration 259 Specifications 26 Order Codes 264 Dimensions

More information

FULL COLOR TAB #6 TC 105

FULL COLOR TAB #6 TC 105 FULL COLOR TAB #6 TC 105 SERIES TC 2-STAGE TELESCOPING CYLINDER CONSTRUCTION FEATURES 3 Bore Sizes: 0.75, 1.50 and 2.50 Strokes up to 60 2-Stage Telescoping Space Saving Design 100% Double Action Heavy-Duty

More information

Product series extended even more! Non-rotating Type. Offers 3 types of non-rotating operation types. push type cylinders. pull type cylinders

Product series extended even more! Non-rotating Type. Offers 3 types of non-rotating operation types. push type cylinders. pull type cylinders The Pen Cylinder s compactness and easy handling make production lines in a broad range of industries. new release with even lighter weight and more PEN CYLINDERS Product series extended even more! The

More information

Hygienic Design Cylinder

Hygienic Design Cylinder ygienic Design ylinder Series Y water resistant cylinder configured for easy cleaning Series Y ISO standard type Series Y asic type Series YQ With guide Series YG J G Y Series 0 0 External seal material

More information

22mm. Compact Guide Cylinder (Basic type) New. Up to. Series MGP. Weight reduced!

22mm. Compact Guide Cylinder (Basic type) New. Up to. Series MGP. Weight reduced! 1-161 Compact Guide Cylinder (Basic type) ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 Up to 17% Weight reduced! New Weight reduced by up to 17% with a shorter guide rod and thinner plate Guide rod

More information

Symbol. How to Order. Suffix Symbol for Cylinder Gaiter J : Lubricator K : Neoprene cloth Cushion N : None R : Rod end H : Head end Blank : Both end

Symbol. How to Order. Suffix Symbol for Cylinder Gaiter J : Lubricator K : Neoprene cloth Cushion N : None R : Rod end H : Head end Blank : Both end Air Cylinder Bore size / 4, 5, 63, 8, 1 Improved energy absorption capacity Cylinder with high tech appearance Improved cushion capacity Compact and lightweight design Increase kinetic energy absorption

More information

Compressed air to

Compressed air to G G A S F J 2 N/ S/F Specifications escriptions Cylinder bore size Working fluid mm Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational stroke length mm Rod

More information

Compact Cylinder. Series CQS CUJ CU CQS CQ2 RQ CQM MU

Compact Cylinder. Series CQS CUJ CU CQS CQ2 RQ CQM MU Compact Cylinder Series ø, ø, ø, ø Ideal for machine designs with small space requirements The D-M auto switch will not protrude from switch mounting groove. Square body shape gives you flexibility for

More information

ISO Standard Hydraulic Cylinder

ISO Standard Hydraulic Cylinder IO tandard ydraulic ylinder eries / eries eries Nominal pressure: a ore size :,,,, Q N Related quipment - Nominal pressure: a ore size : 3,,,,, 4 IO tandard ydraulic ylinder eries Nominal pressure a/ a

More information

CAT.ES C. Compact Guide Cylinder. SeriesMGP. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. New end lock type introduced to Series MGP

CAT.ES C. Compact Guide Cylinder. SeriesMGP. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. New end lock type introduced to Series MGP CT.S-7 C Compact Guide Cylinder Series ø, ø, ø, ø2, ø, ø, ø, ø, ø, ø0 New end lock type introduced to Series . Top mount Compact Guide Cylinder Series ø, ø, ø, ø2, ø, ø, ø, ø, ø, ø0 Four mounting types

More information

For material handling and clamping of small workpieces

For material handling and clamping of small workpieces For material handling and clamping of small workpieces Power Clamp Cylinder New ø25, ø32 Compact Type INFORMATION 34 mm Lightweight Compact High clamping force Lock function 53 mm Lightweight Weight :

More information

Compact Slide. Series MXH ø6, ø10, ø16, ø20

Compact Slide. Series MXH ø6, ø10, ø16, ø20 Compact Slide Series ø, ø, ø, ø The use of an endless track linear guide produces a table cylinder having excellent rigidity, linearity and non-rotating accuracy. Endless track linear guide Series Variations

More information

MULTI SLIDERS CONTENTS

MULTI SLIDERS CONTENTS CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG CONTENTS Features 923 Handling Instructions and Precautions 925 Specifications 929 Order Codes 930 Inner Construction 931 Dimensions 932

More information

Air Cylinder. Single rod 2.5. Single rod Spring return. How to Order/Double Acting. Applicable tubing. Symbol Tube material Polyurethane Soft nylon

Air Cylinder. Single rod 2.5. Single rod Spring return. How to Order/Double Acting. Applicable tubing. Symbol Tube material Polyurethane Soft nylon Air Cylinder Double Acting: ø/single Acting Spring Return: ø2., ø Variations Series Action Standard B Basic mm Double acting Single acting Single rod Single rod Spring return 2. Standard stroke,, 1,,,,

More information

Air Cylinder. Series CJ1. Single rod 2.5. Single rod Spring return. How to Order/Double Acting. Applicable tubing

Air Cylinder. Series CJ1. Single rod 2.5. Single rod Spring return. How to Order/Double Acting. Applicable tubing Air Cylinder Double Acting: ø/single Acting Spring Return: ø2., ø Variations Series Action Standard stroke Page Standard Double acting Single rod,, 1, 1-6 Single acting Single rod Spring return 2.,,, 1,

More information

ISO-6432 MINIATURE CYLINDER/NON-PIVOT TYPE MINIATURE CYLINDER. Specification. Model. Tube I.D. (mm) Port size M5 0.8 G1/8.

ISO-6432 MINIATURE CYLINDER/NON-PIVOT TYPE MINIATURE CYLINDER. Specification. Model. Tube I.D. (mm) Port size M5 0.8 G1/8. MCMI series ISO- MINITURE CYLINDER/NON-PIVOT TYPE MINITURE CYLINDER Table for standard stroke Single acting Double acting ø,,0,7,00 Tightening torque Order example Stroke (mm) ø0,,,0,7,00,,0 ø,0 0,,0,0,0,00

More information

Series MHS. 2 Finger, 3 Finger, 4 Finger Air Gripper Parallel Type. ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100, ø125

Series MHS. 2 Finger, 3 Finger, 4 Finger Air Gripper Parallel Type. ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100, ø125 NS-1 inger, inger, inger Air ripper Parallel Type Series MHS ø1, ø, ø, ø, ø, ø, ø, ø, ø1, ø1 ong inger Stroke Type Protective Boots Available Available With Center Pusher ightweight, compact design with

More information

Series CP95. Profile Design ISO/VDMA Air Cylinder. Increased kinetic energy absorption. Improved end of stroke cushion capacity

Series CP95. Profile Design ISO/VDMA Air Cylinder. Increased kinetic energy absorption. Improved end of stroke cushion capacity Profile Design ISO/VDMA Air Cylinder Series CP95 Improved end of stroke cushion capacity Piston rod lurching has been eliminated at the end of stroke positions by means of a floating seal mechanism. Increased

More information

Construction characteristics. Technical characteristics. End plates Rod Barrel Rod-guide bushing Piston

Construction characteristics. Technical characteristics. End plates Rod Barrel Rod-guide bushing Piston Construction characteristics nd plates Rod Barrel Rod-guide bushing Piston Seals Cushion adjusting screws die-casting aluminium C3 chromed steel or stainless steel aluminium alloy anodised spheroid bronze

More information

ISO CYLINDERS Ø ACTUATORS

ISO CYLINDERS Ø ACTUATORS ISO 15552 CYLINDERS Ø 250-320 1 Cylinders made to ISO 15552 available in various versions and with a wide range of accessories: double-acting single-or through-rod with or without cushioning configuration

More information

Extruded Thrusters. Brochure

Extruded Thrusters. Brochure Extruded Thrusters Brochure Chrome plated stainless steel guide shafts optimize bearing performance Mounting flexibility: Through & C-bore Tapped bottom Tapped rear Bottom T-slots Bronze bushing for heavy

More information

NFPA Interchangeable Air Cylinder Medium Duty Series. ø1.5", ø2", ø2.5", ø3.25", ø4"

NFPA Interchangeable Air Cylinder Medium Duty Series. ø1.5, ø2, ø2.5, ø3.25, ø4 NFP Interchangeable ir ylinder Medium Duty Series Series N ø.5", ø2", ø2.5", ø3.25", ø4" P 2 M2 2 S 76 85 95 P95 Medium Duty.5 to 4" Bore 2 Different NFP Mounting Options Non-rotating Option Tandem ylinder

More information

Compact Cylinder: Standard Type Double Acting, Single Rod. How to Order 30 D F9BW. Body option <Standard stroke> Nil C M. Double acting.

Compact Cylinder: Standard Type Double Acting, Single Rod. How to Order 30 D F9BW. Body option <Standard stroke> Nil C M. Double acting. Compact Cylinder: Type Series ø, ø, ø, ø How to Order Without auto switch D With auto switch CDQS D FW S Number of auto switches L F G D, uilt-in magnet Mounting style Through-hole/oth ends tapped common

More information

ACTUATORS. F-Series Plus Cylinders Single and Double acting 9/16" to 3" bore. Technical features Medium: Filtered, lubricated or nonlubricated,

ACTUATORS. F-Series Plus Cylinders Single and Double acting 9/16 to 3 bore. Technical features Medium: Filtered, lubricated or nonlubricated, F-Series Plus ylinders Technical features Medium: Filtered, lubricated or nonlubricated, compressed air Operating pressure 200 psig (3.6 Bar) Max. Temperature range: Standard Nitrile seals: -40 F to 200

More information

Series RSH/RS1H. To stop pallets gently. Heavy Duty Stopper Cylinder. Stopper cylinder with built-in shock absorber. ø20, ø32 ø50, ø63, ø80

Series RSH/RS1H. To stop pallets gently. Heavy Duty Stopper Cylinder. Stopper cylinder with built-in shock absorber. ø20, ø32 ø50, ø63, ø80 1 eavy Duty Stopper Cylinder Series RS/RS1 ø, ø ø, ø, ø To stop pallets gently CX CY RC RS A MI S C G5-S Stopper cylinder with built-in shock absorber - -9-1 2 eavy Duty Stopper Cylinder Series RS/RS1

More information

Air Cylinder. ø125, ø140, ø160, ø180, ø200, ø250, ø300. Lube. Single rod. Non-lube. Series. Air-hydro. Lube. Double rod. Non-lube CS1W.

Air Cylinder. ø125, ø140, ø160, ø180, ø200, ø250, ø300. Lube. Single rod. Non-lube. Series. Air-hydro. Lube. Double rod. Non-lube CS1W. Air ylinder Series S,,,,,, Series Variations Series Action asic Standard variations Page J JP J Standard Series S Series S Double acting Single rod Series S Double rod Series SW 4 4 M G M M A S S Series

More information

Specification. Tube I.D Port size M5 0.8 Rc1/8. Medium. Proof pressure. Available speed range. Ambient temperature

Specification. Tube I.D Port size M5 0.8 Rc1/8. Medium. Proof pressure. Available speed range. Ambient temperature MM series MINITURE YLINDER Features Non lubrication Special housing and bushing enables self lubrication of piston rod. igh quality long service life ard anodised stainless steel cylinder tubes offer a

More information

Air Cylinder: Standard Type Double Acting, Double Rod. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order. Bore size

Air Cylinder: Standard Type Double Acting, Double Rod. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order. Bore size Air Cylinder: tandard eries CG1W,,,,,,, 0 How to Order auto switch auto switch CG1W L N 0 With auto switch CDG1W L N 0 HW N A uilt-in magnet Double acting, double rod type L U Mounting style asic style

More information

Basic type/direct mount type

Basic type/direct mount type Basic type/direct mount type Series / ø, ø, ø, ø, ø, ø, ø, ø, ø3 CYS -Z CYL CYH CYF CYP 443 D- -X Technical data Magnetically Coupled Rodless Cylinder Direct mount type Series / Basic type Improved durability

More information

List Price. Part Number

List Price. Part Number 162 style tp piston T-Seals combine a resilient sealing ring with a hard, split back-up ring on each side of the sealing element. The assembly installs in a standard o-ring groove. T-Seals are non-spiraling

More information

Industrial Welded Cylinders

Industrial Welded Cylinders Industrial Welded ylinders Technical Manual Series WH Table of ontents Design Features and Specifications...2 How to Order...3 WH Mounting Dimensions...4 Rod End Styles...7 Technical Data...8 Design Features

More information

HFP Series. Specifications. Switch specifications. Wide parallel hand Double acting. Operational stroke length: 20, 30, 40, 60mm.

HFP Series. Specifications. Switch specifications. Wide parallel hand Double acting. Operational stroke length: 20, 30, 40, 60mm. FH0 G B FH0 G A S F J H2 N/ S/F Specifications Size Cylinder bore size mm Actuation Working fluid Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational stroke

More information

ASP Series Steel Body NFPA Cylinder Line

ASP Series Steel Body NFPA Cylinder Line Series Steel Body NFPA Cylinder Line www.numatics.com Table of Contents Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Port Size Availability 6 Dimensions 7-34 Rod Ends 7 Large Bore 8

More information