APCO CVS-250/250A SWING CHECK VALVES
|
|
|
- Steven Little
- 6 years ago
- Views:
Transcription
1 BULLETIN 250 NOVEMBER 2014 APO VS-250/250A SWING EK VALVES Design and onstruction APO VS-250/250A Swing heck Valves are used to prevent the backflow of fluid by closing before flow reversal. They are installed in clean and dirty applications including sewage treatment, water treatment, water distribution, industrial water and wastewater services. The APO Swing heck Valves VS-250/250A are constructed with a heavy ductile iron body, a stainless steel body seat ring, and a single continuous stainless steel shaft for the attachment of the outside closure control devices. losure devices include air cushion side mounted cylinder with lever and weight, lever and weight, or a lever and spring. Wide Size Range APO VS-250/250A Swing heck Valves are available in sizes 2-42" ( mm). AWWA 508 ompliant APO VS-250/250A Swing heck Valves are manufactured and tested per the requirements of AWWA standard Swing heck Valves for Waterworks Service 2" through 24" (50mm through 600mm). Rated to 250 psi (1724 kpa) All APO VS-250/250A Swing heck Valves are rated to 250 psi (1724 kpa) WP. Efficient Full Waterway Flow The valve provides an efficient flow path with an area equal to or greater than the area of the nominal valve size. As a result, the APO VS-250/250A Swing heck Valves have lower head loss than other check valves. Drip Tight Shut-Off The APO VS-250/250A resilient seat provides drip tight shut-off up to the full rating of the valve.
2 Materials of onstruction Item Description Material A01 Body Ductile Iron, ASTM A536, Grade A02 over Ductile Iron, ASTM A536, Grade A03 over Gasket Acrylonitrile-Butadiene (NBR) A05 Body Seat Ring Stainless Steel, Type F-8M, ASTM A743 A06 Disc Seat Acrylonitrile-Butadiene (NBR) A08 Disc Stem Stainless Steel, Type 303, ASTM A582, ondition A A09 Disc Arm Ductile Iron, ASTM 536, Grade A10 Disc Ductile Iron, ASTM 536, Grade A11 Straight Bushing Stainless Steel, Type 304 A12 Flanged Bushing Stainless Steel, Type 304 A13 Pivot Shaft Stainless Steel, Type 303, ASTM A582, ondition A A15 Pivot Shaft over Ductile Iron, ASTM A536, Grade A17 Packing Virgin PTFE A18 Shaft over Seal Acrylonitrile-Butadiene (NBR) A31 Seat Retaining Ring Stainless Steel, Type 304, ASTM A276, ondition A A33 Pivot Shaft Disc Key Stainless Steel, Type 304, ASTM A276, ondition A A37 Packing Gland Ductile Iron, ASTM A536, Grade A41 otter Pin Stainless Steel A42 Pipe Plug Stainless Steel, Type 304 A48 Stud Stainless Steel, Type 304 A49 Stud Stainless Steel, Type 304 A60 Pivot Shaft Retaining Pin Stainless Steel, Type 304, ASTM A276, ondition A A64 Eye Nut arbon Steel, ASTM A108, Grade 1018 A64 Note: Items A11 and A12 are not included in the 2" & 3" (50mm & 80mm) valve sizes. All fasteners are Stainless Steel, Type 304. A42 A48 A05 A31 A06 A10 A02 A09 A03 A41 A60 A15 A08 A12 A11 A18 A17 A01 A13 A49 A37 A33 B DeZURIK, Inc.
3 Item Description Material B19 ounter Weight Arm Assembly Ductile Iron, ASTM A536, Grade B20 ylinder Assembly Aluminum Alloy B24 ylinder Bracket Ductile Iron, ASTM A536, Grade B27 ushion Lever Ductile Iron, ASTM A536, Grade B29 ounter Weight Ductile Iron, ASTM A536, Grade B30 Flow ontrol Valve Aluminum Alloy B34 Pivot Shaft Key Stainless Steel, Type 304 B46 Reducer Bushing 8-42" ( mm) Stainless Steel, Type 304 B47 Pipe Nipple Stainless Steel, Type 304 B48 Pipe Elbow Stainless Steel, Type 304 B58 Air Breather Bronze B59 ushion Lever levis Pin Stainless Steel, Type 304 B60 Retaining Ring Stainless Steel, Type 304 B61 levis Pin Steel, Zinc Plated B62 Retaining Ring Stainless Steel, Type 304 B63 Male levis Bracket Aluminum Alloy B64 Female levis Bracket Aluminum Alloy B65 Yoke Steel, Black Powder oated B66 Spring Lever Arm Key Stainless Steel, Type 304 B67 Sprng Lever Arm Retaining Screw Stainless Steel, Type 304 B68 Spring Steel B69 Spring Bracket Steel, ASTM A36 B70 Eye Screw Alloy Steel, eat Treated B71 Eye Screw Retaining Nut Steel, ASTM A563, Grade A Lever and Weight B19 B29 Lever and Spring B67 B19 B66 B68 B70 B69 B71 Air Air ushion ylinder with Speed Speed ontrol ontrol Assembly Assembly B27 B59 B19 B60 B20 B58 B29 B48 B24 B62 B61 B64 B63 B46 B30 B47 3
4 Valve Selection Applicable Standards APO VS-250/250A Swing heck Valves are designed and/or tested to meet the following standards: onforms to Swing heck Valves for Waterworks AWWA Service, 2-24" ast Iron Pipe Flanges and Flanged Fittings, ANSI B lbs. (60 kg) onforms to related flange drilling dimensions. arbon Steel Flanges and Flanged Fittings, ANSI B lbs. (70 kg) onforms to related flange drilling dimensions. Shut-Off apabilities Resilient Seat Drip tight shut-off Pressure Ratings (Ambient Temperature) Valve Size 2-42" mm Direct Pressure 250 psi WP 1724 kpa WP Note: ontact DeZURIK for higher pressures and larger sizes. Valve and Air ushioned ylinder Weights Valve Weight Size 3" mm 50 4" mm 66 6" mm 93 8" mm " mm " mm " mm " mm " mm " mm " mm " mm " mm " ontact 1100mm DeZURIK Lbs Kgs ead Loss haracteristics for Swing heck Valves ead Loss in Feet Flow in Gallons Per Minute 4
5 Ordering To order, simply complete the valve order code from information shown. An ordering example is shown for your reference. Valve Style Give valve style code as follows: VS = Swing heck Valves Valve Size Give valve size code as follows: 2 = 2" (50mm) 14 = 14" (350mm) 2.5 = 2.5" (65mm) 16 = 16" (400mm) 3 = 3" (80mm) 18 = 18" (450mm) 4 = 4" (100mm) 20 = 20" (500mm) 6 = 6" (150mm) 24 = 24" (600mm) 8 = 8" (200mm) 30 = 30" (750mm) 10 = 10" (250mm) 36 = 36" (900mm) 12 = 12" (300mm) 42 = 42" (1100mm) Body Style Give body style code as follows: 250A = Series 250A 2-14" (50-350mm) 250 = Series " ( mm) End onnection Give end connection code as follows: F1 = Flanged, ANSI 125/150 Body Material Give body material code as follows: DIF = Ductile Iron, 12 mils Fusion Bonded Blue Epoxy Lined & 8 mils coated, Body Style 250 or 250A Trim ombination Disc Material Give disc material code as follows: DI = Ductile Iron Shaft Material Give shaft material code as follows: S1 = 304 Stainless Steel, Body Style 250 or 250A Body Seat Material Give body seat material code as follows: S2 = 316 Stainless Steel, Body Style 250 or 250A Disc Seat Material Give disc seat material code as follows: NBR = Acrylonitrile-Butadiene -70 to 250 F (-57 to 121 ) losure ontrol Devices Give operating device code as follows: A = Air ushion Side Mounted ylinder (Lever & Weight) LS = Lever & Spring LW = Lever & Weight Accessories Give accessory code as follows: 250 or 250A Body Style SEL22 = Limit Switch - DPDT AB 802T-DTP SEL30 = Proximity Switch - SPDT GO B2 VP = Vertical Flow Up Position Installation Ordering Example: VS,8,250A,F1,DIF,DI-S1-S2-NBR*A,SEL22 5
6 6 Valve Size A B D E F Q R S 2" 50mm " 65mm " 80mm " 100mm " 150mm " 200mm " 250mm " 300mm " 350mm " 400mm " 450mm " 500mm " 600mm " 750mm " 900mm " 1100mm ontact DeZURIK Dimensions Lever and Weight Inches Millimeters Q A SEAT SIDE B D E S R VP, VERTIAL FLOW UP POSITION INSTALLATION LEVER ARM SWING Q A SEAT SIDE B D E S R VP, VERTIAL FLOW UP POSITION INSTALLATION LEVER ARM SWING
7 7 Valve Size A B D E F Q R 2" 50mm " 65mm " 80mm " 100mm " 150mm " 200mm " 250mm " 300mm " 350mm " 400mm " 450mm " 500mm " 600mm " 750mm " 900mm " 1100mm ontact DeZURIK Dimensions Lever and Spring Inches Millimeters Q A B E D R
8 Dimensions Air ushion Side Mounted ylinder (Lever and Weight) Valve Size 2" 50mm 2.5" 65mm 3" 80mm 4" 100mm 6" 150mm 8" 200mm 10" 250mm 12" 300mm 14" 350mm 16" 400mm 18" 450mm 20" 500mm 24" 600mm 30" 750mm 36" 900mm 42" 1100mm Inches Millimeters A B D E F Q R S T E ontact B DeZURIK D E R D S VP, VERTIAL FLOW UP POSITION INSTALLATION LEVER ARM SWING R VP, VERTIAL FLOW UP POSITION INSTALLATION LEVER ARM SWING SEAT SIDE S B T Q SEAT SIDE T Sales and Service For information about our worldwide locations, approvals, certifications and local representative: Web Site: info@dezurik.com A 250 Riverside Ave. N. Sartell, Minnesota Phone: Fax: DeZURIK, Inc. reserves the right to incorporate our latest design and material changes without notice or obligation. Design features, materials of construction and dimensional data, as described in this bulletin, are provided for your information only and should not be relied upon unless confirmed in writing by DeZURIK, Inc. ertified drawings are available upon request. Printed in the U.S.A.
APCO SURGE RELIEF ANGLE VALVES (SRA)
BULLETIN 3000 MARCH 2018 APCO SURGE RELIEF ANGLE VALVES (SRA) Design & Construction APCO Surge Relief Angle Valves (SRA) are designed to limit surge pressure and the potential damage to the pump system.
DeZURIK BOS-US 2-20" (50-500mm) UNINTERRUPTED SEAT RESILIENT SEATED BUTTERFLY VALVES TECHNICAL SPECIFICATIONS
BULLETIN 46.00-2B OCTOBER 2015 DeZURIK BOS-US 2-20" (50-500mm) UNINTERRUPTED SEAT RESILIENT SEATED BUTTERFLY VALVES TECHNICAL SPECIFICATIONS - Materials of Construction - Specifications - Ordering - Dimensions
BULLETIN 579 JULY 2011 APCO CONVERTIBLE SWING CHECK VALVES
BULLETIN 579 JULY 2011 APCO CONVERTIBLE SWING CHECK VALVES APCO Convertible Swing Check Valves Engineer: APCO is a unique check valve manufacturer. We are unique because we manufacture seven different
APCO CVS-6000/6000A SWING CHECK VALVES
ULLTIN 00/579 JUN 2016 PO S-00/00 SING K LS PO S Swing heck s are recommended for clean and dirty services such as ater, Sewage or Industrial applications. S-00/00 Swing heck s are a heavily constructed,
DeZURIK BOS-CL ON-CENTER, RESILIENT SEATED BUTTERFLY VALVE TECHNICAL SPECIFICATIONS
BULLETIN 46.00-4 MARCH 2015 DeZURIK BOS-CL ON-CENTER, RESILIENT SEATED BUTTERFLY VALVE TECHNICAL SPECIFICATIONS Materials of Construction Item Description Material A1 Body Ductile Iron, ASTM A536, 65-45-12
BULLETIN A DECEMBER DeZURIK.5 3" (15 80mm) PEC ECCENTRIC PLUG VALVES
BULLETIN 12.00-1A DECEMBER 2011 DeZURIK.5 3" (15 80mm) PEC ECCENTRIC PLUG VALVES Time-Tested Quality In thousands of installations worldwide, DeZURIK Eccentric Plug Valves have a proven record of long-term
BULLETIN D NOVEMBER DeZURIK KSL-SD SLURRY KNIFE GATE VALVES TECHNICAL SPECIFICATIONS
BULLETIN 52.00-1D NOVEMBER 2016 DeZURIK KSL-SD SLURRY KNIFE GATE VALVES TECHNICAL SPECIFICATIONS Materials of Construction Item Description Material A1 Body Ductile Iron, ASTM A395, Grade 65-45-15, ASTM
APCO SLANTING DISC CHECK VALVES
BULLETIN 800 JULY 2011 APCO SLANTING DISC CHECK VALVES Series 800, 800B, 800T APCO Slanting Disc Check Valve With decades of experience to guarantee reliability and outstanding performance, our Slanting
BULLETIN SEPTEMBER 2009 BOS OFFSET DISC RESILIENT- SEATED BUTTERFLY VALVES TECHNICAL SPECIFICATIONS
ULLETIN 46.00-2 SEPTEMER 2009 OS OFFSET IS RESILIENT- SETE UTTERFLY VLVES TEHNIL SPEIFITIONS Materials of onstruction 2 s (50-) 8 9 7 Wafer and Lugged esign 10 3 Wafer ody Lugged ody 6 5 4 1 2 2 s (50-)
BULLETIN B MAY DeZURIK KGN UNIDIRECTIONAL CAST STAINLESS STEEL KNIFE GATE VALVES TECHNICAL SPECIFICATIONS
BULLETIN 2-1B MAY 2013 DeZURIK KGN UNIDIRECTIONAL CAST STAINLESS STEEL KNIFE GATE VALVES TECHNICAL SPECIFICATIONS Materials of Construction Item Description Material A1 Body 304 Stainless Steel ASTM A351
The SWL Series Swing Check Valves Meets AWWA C Standards (Full Waterway) Accepts Air Cushions Cost-effective Swing Check Valve Solution
The Series Meets AWWA C-508-01 Standards (Full Waterway) Accepts Air Cushions Cost-effective Swing Check Valve Solution Crispin Since 1905 Crispin Multiplex Manufacturing Co. 600 Fowler Avenue Berwick,
BULLETIN OCTOBER DeZURIK ROTARY DIAPHRAGM ACTUATORS
BULLETIN 70.00-1 OCTOBER 2012 DeZURIK ROTARY DIAPHRAGM ACTUATORS 2 2012 DeZURIK, Inc. Design & Construction DeZURIK rotary diaphragm actuators are available for use on rotary control valves including:
DeZURIK KSL-LA SLURRY KNIFE GATE VALVES TECHNICAL SPECIFICATIONS
BULLETIN 52.00-1B JUNE 2015 ezuri SL-LA SLURRY NIFE GATE VALVES TECNICAL SPECIFICATIONS www.dezurik.com Materials of Construction Item escription Material A1 Body uctile Iron, ASTM A536, Grade 65-45-12
APCO ASU COMBINATION AIR VALVE
BULLETIN 300.00-1 JANUARY 2016 APCO ASU COMBINATION AIR VALVE - Design - Operation - Performance www.dezurik.com Innovative Air Valve Technology The APCO ASU Combination Air Valve introduces an innovative
BULLETIN B JANUARY DeZURIK ROTARY DIAPHRAGM ACTUATORS TECHNICAL SPECIFICATIONS
ULLETIN 70.00-1 JNURY 2017 DeZURIK ROTRY DIPHRGM CTUTORS TECHNICL SPECIFICTIONS Materials of Construction DR-40 Item Description Material 1 Diaphragm Cover 316 Stainless Steel, STM 240/276 13 15 20 5 29
AWWA SWING CHECK VALVES. Engineering Creative Solutions for Fluid Systems Since 1901
AWWA SWING CHECK VALVES Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS AWWA SWING CHECK VALVE Series 8001 Lever & Weight or Spring...1 Series 9001 Lever & Weight or Spring...2
KGC CAST STAINLESS STEEL KNIFE GATE VALVES BULLETIN MAY 2003
KGC CAST STAINLESS STEEL KNIFE GATE VALVES BULLETIN 35.00-1 MAY 2003 KGC CAST STAINLESS STEEL KNIFE GATE VALVES Design and Construction DeZURIK Cast Knife Gate Valves (KGC) are designed for on-off and
BULLETIN B FEBRUARY DeZURIK PEF 100% PORT ECCENTRIC PLUG VALVES TECHNICAL SPECIFICATIONS
BULLETIN.60-B FEBRUARY 0 DeZURIK PEF 00% PORT ECCENTRIC PLUG VALVES TECHNICAL SPECIFICATIONS Materials of Construction Item Description Material A Body Cast Iron, ASTM A6, Class B A Body Bearing 36L Stainless
SERIES CVI AWWA C508 SWING CHECK VALVES 2-48
SERIES CVI AWWA C508 SWING CHECK VALVES -48 508-103 R0 June 018 LIFTING LUGS & ACCESSORY HOLE VSI check valve covers come standard with stainless steel lifting lugs for ease of install and movement in
SECTION SWING CHECK VALVES
PART 1 GENERAL 1.1 DESCRIPTION This section includes materials, testing, and installation of swing check valves as shown in the Drawings and specified herein, in accordance with the requirements of the
516509_tabs 11/16/10 4:55 AM Page 1 FIRE HYDRANTS
Date Printed: November 2010 FIRE HYDRANTS or Tyton (6"),6, or 8" A EDDY FIRE HYDRANTS PARTS LIST WORKING PRESSURE: 150 PSI Note: Discontinued For Reference Only 350 PSI Working Pressure
Series 800 AWWA Butterfly Valves
Series 800 AWWA Butterfly Valves Valve and Gate Group A Century of Experience GA valves are known for long term reliability in the most demanding water and wastewater applications. Whether a simple check
BULLETIN H JUNE DeZURIK KGC-BD BI-DIRECTIONAL CAST STAINLESS STEEL KNIFE GATE VALVES TECHNICAL SPECIFICATIONS
BUETIN 3-1H JUNE 2016 DeZURIK KGC-BD BI-DIRECTIONA CAST STAINESS STEE KNIFE GATE VAVES TECHNICA SPECIFICATIONS Materials of Construction Item Description Material A1 Body 304 Stainless Steel, ASTM A3 CF8
AWWA Swing Check Valves
AWWA Swing Check Valves Engineering Creative Solutions for Fluid Systems Since 1901 A Tradition of Excellence With the development of the first rubber seated butterfly valve more than 70 years ago, the
BULLETIN APRIL DeZURIK VPB V-PORT BALL VALVES
BULLETIN 15.00-1 APRIL 2017 DeZURIK VPB V-PORT BALL VALVES VPB V-Port Ball Valves Design and Construction DeZURIK V-Port Ball valves deliver superior performance and reliability required to optimize process
CCNE Check Valves Engineering Creative Solutions for Fluid Systems Since 1901
CCNE Check Valves Engineering Creative Solutions for Fluid Systems Since 1901 A Tradition of Excellence With the development of the first rubber seated butterfly valve more than 70 years ago, the Henry
INSERTA VALVE SLEEVE INSERTA VALVE ASSEMBLY. Valve insertion, simplified MATERIAL SPECIFICATIONS MATERIAL SPECIFICATIONS.
MADE IN U.S.A. Valve insertion, simplified 10-12 installations in cast iron, ductile iron, A/C, PVC C-900 and steel pipe No Loss of Pressure Minimal Water Loss Completion time is less than 2 hours Much
Approved Branded Traceable Fire Protection & Waterworks Valves
Approved Branded Traceable Fire Protection & Waterworks Valves (800) 766-0076 www.smithcooper.com Los Angeles, CA Atlanta, GA Vancouver, WA Chicago, IL AWWA C515 Compliant CONSIDER Your Options Tamper
M&H AWWA C508 STANDARD SWING CHECK VALVES
GENERAL M&H AWWA C508 STANDARD SWING CHECK VALVES Style 59-02 plain / 159-Lever & Weight / 259-02 Lever & Spring Sizes 2 Through 36 Water / Sewage Service M&H Swing Check valves are widely specified by
APCO CVS-250/250A SWING CHECK VALVES
APCO CVS-250/250A SWING CHECK VALVES Instruction D12003 September 2015 Instructions These instructions provide installation, operation and maintenance information for APCO CVS- 250/250A Swing Check Valves.
M&H AWWA C508 STANDARD SWING CHECK VALVES
GENERAL M&H AWWA C508 STANDARD SWING CHECK VALVES Style 59-02 plain / 159-Lever & Weight / 259-02 Lever & Spring Sizes 2 Through 36 Water / Sewage Service M&H Swing Check valves are widely specified by
BULLETIN FEBRUARY 2009 BHP HIGH PERFORMANCE BUTTERFLY VALVES
BULLETIN 45.00-1 FEBRUARY 2009 BHP HIGH PERFORMANCE BUTTERFLY VALVES Time-Tested, Exceptional Performance DeZURIK BHP High Performance Butterfly Valves are specially designed for applications in the chemical,
BS 5163 Resilient Wedge Gate Valve
BS 516 Resilient Wedge Gate Valve BS 516 Flanged Resilient OS&Y Gate Valve, Type A, (XZ41X), /16, Gate valves serve to cut the medium flow in the piping system, widely used in the field of potable water,
SURGEBUSTER! BUILT WITH ADVANCED TECHNOLOGY TO WITHSTAND YOUR TOUGHEST APPLICATIONS. Air Release Air Valves. Air/Vacuum Air Valves
V SURGEBUSTER! Air Release Air Valves Bulletin 7200 Air/Vacuum Air Valves Combination Air Valves Well Service Air Valves Wastewater Air Valves Anti-Slam Air Valves Vacuum Relief Air Valves A member of
Standard Product Range
Standard Product Range Standard Pressure onnection Nominal size inch Product code mm ASME 150/200 psi Wafer Lugged 1 150/200 DJ 1 150/200 DJL Standard Product Range EN PN10 PN16 PN25 Wafer Lugged Wafer
Suggested Specifications
ISO 9001 Certified Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve, setting higher standards for dependable performance
Installation Operation Maintenance
Installation Operation Maintenance www.challengervalves.com.au 1 Index 1. INTRODUCTION 1.1 General Application 3 1.2 Technical Data 3 1.3 Features 4 1.4 Operation 4 1.5 Design Constraints 4 2. TECHNICAL
SECTION MISCELLANEOUS VALVES
SECTION 05140 - PART 1 - GENERAL 1.1 WORK OF THIS SECTION A. The WORK of this Section includes providing miscellaneous valves as indicated, complete and operable, including accessories and operators. 1.2
DeZURIK BHP HIGH PERFORMANCE BUTTERFLY VALVES
BULLETIN 45.00-1 NOVEMBER 2017 DeZURIK BHP HIGH PERFORMANCE BUTTERFLY VALVES Time-Tested, Exceptional Performance DeZURIK BHP High Performance Butterfly Valves are specially designed for applications in
AMERICAN FLOW CONTROL 3-16 SERIES 2100 RESILIENT SEATED CHECK VALVE
AMERICAN FLOW CONTROL 3-16 SERIES 2100 RESILIENT SEATED CHECK VALVE CONSTRUCTION STAINLESS STEEL PIPE PLUG Allows installation of pressure gauge. STAINLESS STEEL FASTENERS Helps provide corrosion resistance.
MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE
ISO 9001 CERTIFIED MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve,
DeZURIK KUL KNIFE GATE VALVES
KUL KNIFE GATE VALVES Instruction D11025 September 2013 Instructions These instructions are intended for personnel who are responsible for the installation, operation and maintenance of your KUL knife
SUBMITTAL PACKAGE FIRE PROTECTION VALVES
SUBMITTAL PACKAGE FIRE PROTECTION VALVES Butterfly Valves Ductile Iron Grooved...pg 2-5 Grooved Check Valves...pg 6-8 OS&Y Valves...pg 9-12 ARGCO.com 800-854-1015 Updated 2/27/2017 ARGCO GROOVED BUTTERFLY
InsertaValve Sleeve. InsertaValve Valve Assembly. Valve Insertion, simplified. Material Specifications. Transmate InsertaValve
Material Specifications Material Specifications Sleeve 10" - 12" installations in cast iron, ductile iron, A/C, PVC C-900 and steel pipe No Loss of Pressure Minimal Water Loss Completion time is less than
AIR/VACUUM VALVE AND OPTIONAL ANTI-SLAM DEVICE SPECIFICATION
AIR/VACUUM AND OPTIONAL ANTI-SLAM DEVICE SPECIFICATION Scope. This specification is intended to cover the design, manufacture, and testing of / in. (3 mm) through 0 in. (00 mm) Air/Vacuum Valves suitable
PROJECT TITLE PROJECT NO: CONTRACT TITLE GRANT NO: UNIVERSITY OF CALIFORNIA, DAVIS CITY, CALIFORNIA
The following standard specification is intended to be edited according to the specifics of the project. Brackets [ ] and areas shaded in gray [e.g. format] indicate requirements that are optional depending
Iron Check Valves Illustrated Index
Iron Check Valves Illustrated Index Iron Body Swing Check Valve Bronze Mounted or All Iron 125 lb. SWP 200 lb. CWP Iron Body Swing Check Valve Bronze Mounted 250 lb. SWP 500 lb. CWP Iron Body Silent Check
ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
AUTOMATION ACCESSORIES IN-PLANT VALVE PRODUCTS EXTENSION STEMS FLOORBOX STEM GUIDES FLOORSTANDS COMMITTED TO ENVIRONMENTAL RESPONSIBILITY FLAP VALVES
INCREASING SWING CHECK VALVES FLAP VALVES SWING CHECK VALVES AUTOMATION ACTUATION CLOW VALVE has furnished valves with many assorted types of motorized to operate our valves. The gate valves use multi-turn,
AWWA C504 - BUTTERFLY VALVES
License Number 6D-1724 AWWA C504 - BUTTRFLY VALVS License Number 6D-1724. Gate Valves Knife Gate Valves Ball Valves Check Valves Plug Valves Air Release Valves Oil and Gas Water and Sewage, Chemicals Paper
Cast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
Milliken Valve offers the following for your water and wastewater needs:
Milliken Valve offers the following for your water and wastewater needs: s Series 601/600 Flanged & MJ Series 601S Stainless Steel Series 601RL Rubber Lined Series 602 High Pressure Series 613A Threaded
Check Valve MODEL. Schematic Diagram. Product Dimensions Data:
Check Valve Simple Proven Design No-Slam Operation Drip-Tight Shut-Off No Packing Glands or Stuffing Boxes Easy to Install & Maintain 8-0 (Full Internal Port) MODEL 68-0 (Reduced Internal Port) The Cla-Val
DeZURIK 2-24 (50-600mm) KGN-RSB BI-DIRECTIONAL CAST STAINLESS STEEL KNIFE GATE VALVES
2-24 (50-600mm) KGN-RSB BI-DIRECTIONAL CAST STAINLESS STEEL KNIFE GATE VALVES Instruction D11023 October 2016 Instructions These instructions provide information about KGN-RSB Knife Gate Valves. They are
J & S Valve GATE VALVE AWWA C509. Resilient Seated Solid Wedge Size: 2-12
J & S Valve GATE VALVE Resilient Seated Solid Wedge Size: 2-12 AWWA C509 Resilient Seated Solid Wedge Gate Valve Series 6000 AWWA C509 2 Operating Nut or Hand Wheel Stem Stainless Steel or Bronze Gland
V January 2016 SINGLE SEATED V5011 SERIES. Previously manufactured by Dezurik and Honeywell
V5011. January 2016 SINGLE SEATED V5011 SERIES Previously manufactured by Dezurik and Honeywell Description: 2 ½ to 6 class 5 with cast iron body, bronze trim and composite seat, ideally suited for low
Valve Selection. 1. Function and service considerations
1. Function and service considerations Valve Selection Selection Valves serve the purpose of controlling the fluids in building services piping. Valves are produced in a variety of design types and materials.
CHECKtronic Pump Control Valve
CHECKtronic Pump Control Valve A Century of Experience VAG GA Industries valves are known for long term reliability in the most demanding water and wastewater applications. Whether a simple check valve
APCO ASR-400/450 SEWAGE AIR RELEASE VALVES
APCO ASR-400/450 SEWAGE AIR RELEASE VALVES Instruction D12005 December 2012 Instructions These instructions provide installation, operation and maintenance information for the APCO ASR- 400/450 Sewage
SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SECTION 220523 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
SWING CHECK VALVES SERIES 52-SC SERIES 600
SWING CHECK VALVES SERIES 52-SC SERIES 600 FEATURES/BENEFITS/SPECIFICATIONS AMERICAN Flow Control Series 52-SC Swing Check Valves incorporate design features to help increase service life for water and
MODEL 106-PT / 106-PTC / S106-PT / S106-PTC DOUBLE CHAMBER HYDRAULICALLY OPERATED VALVE
MAIN VALVES MODEL 06-PT / 06-PTC / S06-PT / S06-PTC KEY FEATURES Maintains positive control under all operating pressures Precise positioning Internal drop check option included on the PTC model Available
The Number One Choice of Line Stopping Contractors
JCM 0 Line Stop Fittings Take a Look!!! JCM 0 FAMILY OF LINE STOP FITTINGS HAS EPANDED New Plug Option - New Numbering System Whatever your application needs, JCM has it! JCM Industries offers the largest
ISO RESILIENT WEDGE GATE VALVE. Engineering Creative Solutions for Fluid Systems Since 1901
ISO RESILIENT WEDGE GATE VALVE Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS ISO RESILIENT WEDGE GATE VALVE Scope of Line...1 Features and Benefits...1 Suggested Specification...2
Valves & Flow Control Components Valves & Flow Control Components
Section 4 Valves & Flow ontrol omponents Valves & Flow ontrol omponents... 106 SJ-200 Low-Profile utterfly Valve... 107 SJ-300N utterfly Valve... 108 SJ-300F utterfly Valve (for Fire Protection)... 110
Approved. Size L H. 3" (76mm) 9-1/2" (241mm) 5-51/64" (147mm) 46. 4" (102mm) 11-1/2" (292mm) 6-45/64" (170mm) 81
pproved. Model: SD-NRV200CV Flanged Ends The Flanged End Check Valves are made of Iron Body, Bolted Bonnet and Horizontal Swing, painted with standard color. Epoxy coated inside and outside to WW C550
Michigan State University Construction Standards. GENERAL-DUTY VALVES FOR PLUMBING PIPING Page
Page 220523-1 SECTION 220523 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
SERIES 2200 Replaceable Seat Butterfly Valves
SERIES 2200 Replaceable Seat Butterfly Valves Publication S2200-101 Issue 04/18 Rev. A Design Characteristics Multiple Seat Options VSI offers various seat options including EPDM, NBR, Viton, and others
SECTION VIII. (Sub-section 430) Wastewater Valves and Appurtenances. 1. General thru Gate Valves thru 430-3
SECTION VIII (Sub-section 430) Wastewater Valves and Appurtenances Article Page 1. General 430-1 thru 430-2 2. Gate Valves 430-2 thru 430-3 3. Plug Valves 430-3 thru 430-4 4. Check Valves 430-4 5. Tapping
Cast-Iron Valves G101 DI BUTTERFLY VALVE LEVER... 2 G401 CI GLOBE VALVE CL G403 CI GLOBE VALVE PN G103 DI BUTTERFLY VALVE GEAR...
Cast-Iron Valves PAGE G101 DI BUTTERFLY VALVE LEVER.... 2 PAGE G401 CI GLOBE VALVE CL125.... 9 G103 DI BUTTERFLY VALVE GEAR.... 3 G403 CI GLOBE VALVE PN16.... 10 G201 CI Y STRAINER CL125.... 4 G501 CI
APCO CVS-6000 CONVERTIBLE SWING CHECK VALVES
APCO CVS-6000 CONVERTIBLE SWING CHECK VALVES Instruction D12009 December 2012 Instructions These instructions provide installation, operation and maintenance information for APCO CVS-6000 Convertible Swing
DeZURIK 2 20" BOS BUTTERFLY VALVES
2 20" BOS BUTTERFLY VALVES Instruction D10459 October 2013 2-20 BOS Butterfly Valves Instructions These instructions provide information about BOS Butterfly Valves. They are for use by personnel who are
Available End Connections & Size Range
ECCENTRIC PLUG VALVES Size Range 3"-24" Water Working Hydrostatic Size Range Pressure psi Test psi 3"-12" 175 350 14"-24" 150 300 Available End Connections & Size Range Figure No. Flanged 3"-24" F-5412
BULLETIN NOVEMBER DeZURIK BHP HIGH PERFORMANCE BUTTERFLY VALVES TECHNICAL SPECIFICATIONS
BULLETIN 45.00-2 NOVEMBER 2017 DeZURIK BHP HIGH PERFORMANCE BUTTERFLY VALVES TECHNICAL SPECIFICATIONS Materials of Construction A3 Disc A5 Pin Disc Pinning 14" & larger (350mm & larger) 2 2017 DeZURIK,
UNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:
SECTION 230523 GENERAL DUTY VALVES FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Provisions of the Contract and of the Contract Documents apply to this Section. 1.2 DEFINITIONS A. The following
APCO CRF-100A RUBBER FLAPPER SWING CHECK VALVES
APCO CRF-100A RUBBER FLAPPER SWING CHECK VALVES Instruction D12043 June 2016 DeZURIK Instructions These instructions provide installation, operation and maintenance information for APCO CRF-100A Rubber
Keystone resilient seated butterfly valves Figure 221 and 222
Figure 221 and 222 An economical bonded resilient seated butterfly valve for bi-directional and end-of-line service F221 Wafer style valve F222 Lugged style valve Features Bubble tight shut-off at full
ROMAC INDUSTRIES, INC. WIDE RANGE RESTRAINT. RESTRAINED END CAP page 6-7 NOW AVAILABLE FOR HDPE PIPE NO STIFFENER REQUIRED
ROMAC INDUSTRIES, INC. WIDE RANGE RESTRAINT RESTRAINED COUPLING page 4-5 RESTRAINED END CAP page 6-7 RESTRAINED FLANGED COUPLING coming soon JUNE 2014 UPDATE NOW AVAILABLE FOR HDPE PIPE NO STIFFENER REQUIRED
The TD Series Tilting Disc Check Valve Sizes from 2 to 72 #125 and #250 ratings available 55 seating angle 40% size increase through seat.
The Series Sizes from 2 to 72 #125 and #250 ratings available 55 seating angle 40% size increase through seat Crispin Since 1905 Crispin Multiplex Manufacturing Co. 600 Fowler Avenue Berwick, PA 18603
mh-valve.com 129 HYDRANT AWWA C502 NSF 61/372 CERTIFIED UL LISTED FM APPROVED 250 PSI WORKING PRESSURE 10-YEAR LIMITED WARRANTY
mh-valve.com 129 HYDRANT AWWA C502 NSF 61/372 CERTIFIED UL LISTED FM APPROVED 250 PSI WORKING PRESSURE 10-YEAR LIMITED WARRANTY 129 HYDRANT YESTERDAY, TODAY, & TOMORROW For more than 85 years, the M&H
INFACT CORPORATION WATERWORKS PRODUCTS FLEX ADAPTOR SPECIFICATION S TOLL FREE:
INFACT CORPORATION WATERWORKS PRODUCTS SPECIFICATION S TOLL FREE: 888-773-9130 email: info@infactcorp.com www.infactcorp.com ENGINEERING DATA / PRODUCT CHECKLIST EASY-TO-INSTALL SPACE-SAVING RESTRAINT
with the specific application. Always read and understand the installation
Worldwide Contacts www.tyco-fire.com Resilient-Seated Gate Valves Outside Screw and Yoke General Description TYCO Resilient-Seated Gate Valves are used in Fire Protection Systems for on/off operation.
Series 77S-M1 ( 1 4" 3") Cast Iron Wye-pattern Strainers
Series S-M1 ( 1 4" ") Cast Iron Wye-pattern Install strainers up stream of equipment that need protection from scale, rust, dirt, etc Pressure Rating: (non-shock) 250psi WSP (1.2 bar) @ 406 F (208 C),
CLOW CANADA - M-67 HERITAGE BRIGADIER FIRE HYDRANT SPECIFICATION
CLOW CANADA - M-67 HERITAGE BRIGADIER FIRE HYDRANT SPECIFICATION TESTING AND DESIGN SPECIFICATIONS (PER AWWA C502 / NSF /ULC & FM) 1. Hydrant shall be manufactured in accordance with AWWA C502 latest revision
SERIES GVI AWWA C509/C515 RESILIENT SEATED GATE VALVES 2-48
SERIES GVI AWWA C509/C515 RESILIENT SEATED GATE VALVES 2-48 509-110 R6 OCT 2018 REPLACEABLE 0-RINGS Triple O-ring sealed with upper two O-rings replaceable with the valve fully open and subjected to the
GENERAL FEATURES / SPEC M&H AWWA C502 FIRE HYDRANTS Style 929 Traffic Model 250 PSI Working Pressure 500 PSI Hydrostatic Test AWWA UL / FM Approval Type: Compression type, opening against line pressure.
KUNKLE MODELS 19/19M/20/20M/20P/20MP/200A/200H LIQUID RELIEF VALVES SAFETY AND RELIEF PRODUCTS
Extra-heavy rugged construction non-code bronze liquid relief valves with a variety of model options to meet specific applications FEATURES Inlet and outlet connections cast integral with body for easy
RESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com
RESILIENT SEATED BUTTERFLY VALVES Howell Valve & Automation Toll Free: 1-888-469-3557 Howellvalve.com TABLE OF CONTENTS Description Page Index 2 Resilient Standard Features 3 ST Boot Series with BUNA-N
Surgebuster Check Valves
Bulletin 7200 Innovative Design Optimum Performance Advanced Technology SURGEBUSTER! Surgebuster Check Valves www.valmatic.com AWWA C508 Certified NSF/ANSI 61 Certified for Drinking Water NSF/ANSI 372
TEL: Version: KW2
WWW.KLAMBON.COM 1 Page Klambon Water is a wholly owned subsidiary of West Rand Engineering (WRE), we are suppliers of valves, fittings and related products to all industries and our service extends to
January 2016 GLOBE VALVES MIXING & DIVERTING SERIES 8600 MODEL Previously manufactured by Dezurik and Honeywell
786.89 January 2016 GLOBE VALVES MIXING & DIVERTING SERIES 8600 MODEL 8900 Previously manufactured by Dezurik and Honeywell Description: The Nor East Series 8600 (mixing) and Series 8900 (diverting) cage
SERIES 900 PLUG VALVES
K - F L O VA LV E S SERIES 900 PLUG VALVES VA LV E S F R O M 1 4 T H R U 4 8 PO Box 411 Berwick PA 18603 800-247-VALV www.crispinvalve.com 900 SerieS Plug Valve Sizes 14-48 Crispin/K-Flo Series 900 is
BUTTERFLY VALVE - WAFER FAF 3500
PRODUCTION STANDARDS DN40 DN600 PN 6-10-16 CLASS 150 Design EN 593 Connection Wafer Type ISO 7005-1 EN 1092-1 Face to Face EN 558 Series 20 Marking EN 19 Tests EN 12266-1 Corrosion Protection Electrostatic
Pipe Size Pipe OD TwinSeal Hinged Design for IPS PVC Pipe MODEL 3402 BRONZE SADDLE FOR COPPER TUBING
MULTIPLIER SERVICE SADDLES MODEL 3401 BRONZE SADDLE FOR IPS PVC BODY CASTINGS: Waterworks Bronze (85-5-5-5) per ASTM B584 and AWWA C800. FASTENERS: Silicon Bronze per ASTM B98. GASKET: Patented SBR TwinSeal
BULLETIN D SEPTEMBER " (100mm) & LARGER PEC ECCENTRIC PLUG VALVES TECHNICAL SPECIFICATIONS
BULLETIN 12.00-1D SEPTEMBER 9 (mm) & LARGER PEC ECCENTRIC PLUG VALVES TECHNICAL SPECIFICATIONS Materials of Construction Item Description Material Cast Iron, ASTM A126, Class B A1 A2 A3 Body Body Bearing
HYDRAULIC CONTROL VALVES
HYDRAULIC CONTROL VALVES The automatic control valves are diaphragm valves designed to provide hydraulically driven solutions to pressure, flow and level control applications. Features: Main valve uses
Specifications For Valve Insertion System
Specifications For Valve Insertion System Equipment For Valve Insertion Pipe Sizes: 4 (100mm) Through 12 (300mm) 1.0 SCOPE This specification covers the furnishing, complete EZ Valve insertion system.
APCO SRG-6500 SURGE RELIEF GLOBE VALVES
APCO SRG-6500 SURGE RELIEF GLOBE VALVES Instruction D12020 December 2012 Instructions These instructions provide installation, operation and maintenance information for APCO SRG-6500 Surge Relief Globe
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 228 Features Bolted bonnet allows easy inspection and servicing without removal from
HYMAX GRIP Wide-Range Restraint Solutions
HYMAX GRIP Wide-Range Restraint Solutions HYMAX GRIP. THE TEETH MAKE THE DIFFERENCE. There are many situations that require couplings with additional restraining power. HYMAX restraint products combine