Specifications for Europe

Size: px

Start display at page:

Download "Specifications for Europe"

Rudolf Jacobs
5 years ago
Views:

~Reliable Sales and Service Nework~ Elecric Servo Drive Shanghai Hong Kong Shenzhen Hanoi Bangkok

Angels Chicago Deroi Overseas Office URL hp://www.jsw.co.

Phone: +8357458 URL hp://www.jsw.co.jp/inj_f/inj_index.hm JSW Plasics Machinery Inc.

e., Uni 4, Corona, California 9879, U.S.A.

Phone: +847574 Deroi Office: 4387 Halsed Road Uni B, Farmingon Hills, Michigan 48335, U.S.A.

7 Gul Lane 6943 Singapore Phone: +6568645 PT.

Tebe, Jakara Selaan 8 Indonesia Phone: +6837536 JSW Plasics Machinery (Philippines) Inc.

Manila 77 Philippines Phone: +63478533 JSW Plasics Machinery (M) SDN. BHD.

Darul Ehsan, Malaysia Phone: +63784676 The Japan Seel Works (Thailand) Co., Ld.

Phone: +6673857 JSW Plasics Machinery (H.K.) Co., Ld.

, Hong Kong Phone: +856487 JSW Injecion Machine Mainenance (Shenzhen) Co., Ld.

63 Chaguang Road, Xili Town, Nanshan Disric, Shenzhen Ciy,Guangdong Province, 5855, People s

1 ~Reliable Sales and Service Nework~ Elecric Servo Drive Shanghai Hong Kong Shenzhen Hanoi Bangkok Gurgaon Kuala Lumpur Singapore Jakara Tokyo Headquarer Taipei Tainan Manila Ho Chi Minh Los Angels Chicago Deroi Overseas Office URL hp:// Division Gae Ciy OhsakiWes Tower,, Osaki chome, Shinagawaku, Head Quarer: Tokyo 43, Japan Phone: URL hp:// JSW Plasics Machinery Inc. Head Office: 555 Souh Promenade Ave., Uni 4, Corona, California 9879, U.S.A. Phone: Chicago Office: 5 Capial Drive, Suie 3, Lake Zurich, Illinois 647, U.S.A. Phone: Deroi Office: 4387 Halsed Road Uni B, Farmingon Hills, Michigan 48335, U.S.A. Phone: The Japan Seel Works (Singapore) Pe. Ld. 7 Gul Lane 6943 Singapore Phone: PT. JSW Plasics Machinery Indonesia Gajah Building Uni K, Jl.Dr.Saharjo No. Tebe, Jakara Selaan 8 Indonesia Phone: JSW Plasics Machinery (Philippines) Inc. Uni 8 Alabang Business Tower, 6 Acacia Avenue, Madrigal Business Park Alabang Muninlupa Ciy Mero Manila 77 Philippines Phone: JSW Plasics Machinery (M) SDN. BHD. D65G,(Ground Floor), Block D6, Pusa Perdagangan Dana, Jalan Pju A/46, 473, Pealing Jaya, Selangor Darul Ehsan, Malaysia Phone: The Japan Seel Works (Thailand) Co., Ld. 78/6 JST Building 4h Floor, Moo 7 King Kaew Road, Rachaewa, Bangplee, Samuprakarn 5 Thailand Phone: JSW Plasics Machinery (H.K.) Co., Ld. Room 97, Corporaion Park, On Lai Sree, Shain N.T., Hong Kong Phone: JSW Injecion Machine Mainenance (Shenzhen) Co., Ld. F, YiBen Elecronic & Business Indusrial Park, No.63 Chaguang Road, Xili Town, Nanshan Disric, Shenzhen Ciy,Guangdong Province, 5855, People s Repubulic of China Phone: JSW Machinery Trading (Shanghai) Co., Ld. 8A, Srengh Plaza, No.64, Tianshan Road, Shanghai, 5, People s Republic of China Phone: JSW Plasics Machinery (TAIWAN) Corp. Head Office: F., No., Da Hu s Road, Guieshan Shiang Taoyuan Counry Taiwan, R.O.C. Phone: Tainan Office: 5F.,7, No.678, Xiaodong Road, Yongkang Ciy, Tainan Counry 75 Taiwan, R.O.C. Phone: Japan Seel Works India Privae Limied 6, Time Tower, MG Rood, Secor 8, Gurgaon, haryana,, India Phone: Specificaions for Europe JSW Plasics Machinery Vienam Ld. Hanoi Head Office: Room3, TechnoCener Thang Long Indusrial Park Dong Anh Disric, Hanoi, Vienam Phone: Ho Chi Minh Office: Ground Floor, DC Tower, D Ly Chinh Thang, Ward 7, Disric 3, HCC, Vienam Phone: (Hiroshima Plan)

2 3 3 Elecric Servo Drive Equipmen Dimensions and Mold Relaed Dimensions Injecion Uni Uni High Speed(Opion) Sandard Clamping Uni Iem Screw Diameer J3ADS Theoreical Injecion Capaciy cm Injecion Capaciy(GPPS) g Injecion Pressure(Max.) MPa{kgf/cm } 76{8} 8{} 77{8} 7{75} 3{7} 7{} Holding Pressure(Max.) MPa{kgf/cm } 5{56} 98{} 6{6} 45{49} 3{7} 57{6} /s cm 3 /s Plasicizing Capaciy(GPPS) kg/h Screw Speed min Injecion Pressure(Max.) MPa{kgf/cm } 76{8} 8{} 77{8} 7{75} 3{7} 7{} Holding Pressure(Max.) MPa{kgf/cm } 5{56} 98{} 6{6} 45{49} 3{7} 57{6} /s cm 3 /s Plasicizing Capaciy(GPPS) kg/h Screw Speed min Injecion Pressure(Max.) MPa{kgf/cm } 76{8} 8{} 77{8} 7{75} 3{7} 7{} Holding Pressure(Max.) MPa{kgf/cm } 5{56} 98{} 6{6} 45{49} 3{7} 57{6} /s 5 5 cm 3 /s Plasicizing Capaciy(GPPS) kg/h Screw Speed min Ex. Holding Pressure(Opion) Nozzle Touch Force kn{f} Nozzle Sroke from Plaen Barrel Temperaure Conrol Heaer Waage Clamping Force kn{f} Dayligh Opening(Max.) Opening Sroke(Max.) Disance Beween Tiebars(H V) Plaen Size(H V) Locaing Ring Diameer kn{f} Machine Weigh Machine Dimensions(L W H) m {.}Cener Touch 5 Open Nozzle Barrel 3 Nozzle 3U {3.6} 66 3 ~ φ6 / Poin(Cener) 9.9{.} Maximum injecion pressure and maximum holding pressure may be resriced due o molding condiion..the heoreical injecion capaciy is(cross secional area of barrel) (sroke of screw). 3.The injecion capaciy is applicable for GPPS and variable according o he grade of resin, molding condiions and mold. 4.The plasicizing rae is applicable for GPPS. 5.PC, HPVC, oher engineering plasic, ec., low emperaure seing and high speed molding may require a high orque depending on he grade or molding condiions. Please conac us if you plan. Noe:.Due o coninual improvemens, specificaions are subjec o change wihou noice..acual figures of he specificaion will vary depending on final machine configuraion. Please conac us if you require more specific daa. 3.Performance specificaions are based on heoreical daa. 4.High speed injecion and Ex. holding pressure injecion are opional. 5.MPa=. kgf/cm,kn=.f 5 M φ Ejecor Rod φ Max. Sroke φ M6 Deph 7 79 M8 3 φ φ6 Min. Max () 3495(3U) 84() 935(3U) Nozzle Sroke U Max. Forward Posiion To Saionary Plaen Top φ () 35(3U) To Hopper Moun Level Waer Inle Rc3/8(Nonoperaion Side) Waer Oule Rc3/8(Nonoperaion Side) φ8 φ3.4 SR φ Movable Plaen () 679(3U) 4Drill (Hole for Leveling Pads) +. φ5 7 φ8 SR 5 φ3.4 44M Deph 6 Mold Mouning Tap M6 Deph 34 Takeou Robo Mouning Tap 957 3U Top of Saionary Plaen

3 5 5 Elecric Servo Drive Injecion Uni Uni Clamping Uni Iem Screw Diameer J5ADS Theoreical Injecion Capaciy cm Injecion Capaciy(GPPS) g Injecion Pressure(Max.) MPa{kgf/cm } 76{8} 8{} 77{8} 7{75} 3{7} 7{} 7{75} 5{9} 65{68} Holding Pressure(Max.) MPa{kgf/cm } 5{56} 98{} 6{6} 45{49} 3{7} 57{6} 45{49} 95{98} 5{53} /s cm 3 /s Plasicizing Capaciy(GPPS) kg/h Screw Speed min Injecion Pressure(Max.) MPa{kgf/cm } 76{8} 8{} 77{8} 7{75} 3{7} 7{} 7{75} 5{9} 65{68} Holding Pressure(Max.) MPa{kgf/cm } 5{56} 98{} 6{6} 45{49} 3{7} 57{6} 45{49} 95{98} 5{53} /s cm 3 /s Plasicizing Capaciy(GPPS) kg/h Screw Speed min Injecion Pressure(Max.) MPa{kgf/cm } 76{8} 8{} 77{8} 7{75} 3{7} 7{} 7{75} 5{9} 65{68} Holding Pressure(Max.) MPa{kgf/cm } 5{56} 98{} 6{6} 45{49} 3{7} 57{6} 45{49} 95{98} 5{53} /s cm 3 /s Plasicizing Capaciy(GPPS) kg/h Screw Speed min Nozzle Touch Force kn{f} 9.6{.}Cener Touch Nozzle Sroke from Plaen 5 Open Nozzle Barrel Temperaure Conrol Barrel 3 Nozzle Barrel 4 Nozzle Heaer Waage Clamping Force kn{f} {5.} Dayligh Opening(Max.) 7 Opening Sroke(Max.) 7 5~47 Disance Beween Tiebars(H V) Plaen Size(H V) Locaing Ring Diameer 5 φ6 / Poin(Cener) φ3.5 / 4 Poins kn{f}.{.} 7 Machine Weigh.7.8 Machine Dimensions(L W H) m Sandard High Speed(Opion) Ex. Holding Pressure(Opion).Maximum injecion pressure and maximum holding pressure may be resriced due o molding condiion..the heoreical injecion capaciy is(cross secional area of barrel) (sroke of screw). 3.The injecion capaciy is applicable for GPPS and variable according o he grade of resin, molding condiions and mold. 4.The plasicizing rae is applicable for GPPS. 5.PC, HPVC, oher engineering plasic, ec., low emperaure seing and high speed molding may require a high orque depending on he grade or molding condiions. Please conac us if you plan. Noe:.Due o coninual improvemens, specificaions are subjec o change wihou noice..acual figures of he specificaion will vary depending on final machine configuraion. Please conac us if you require more specific daa. 3.Performance specificaions are based on heoreical daa. 4.High speed injecion and Ex. holding pressure injecion are opional. 5.MPa=. kgf/cm,kn=.f 3U U 8 3 M φ φ M8 φ 3646() 3767(3U) 39(6U) () 965(3U) 9(6U) To Saionary Plaen Top φ8 φ3.4 SR 374(/3U) 5(6U) φ φ8 7 SR () 679(3U) 8(6U) Waer Inle Rc3/8(Nonoperaion Side) 4Drill Waer Oule Rc3/8(Nonoperaion Side) (Hole for Leveling Pads) () 35(3U) 3(6U) (6U) φ8 φ3.4 SR 5 5 3U 3U M Ejecor Rod φ5 Max. Sroke 7 φ6 6U φ5 +. M6 Deph 7 Min. 5 Max. 47 Equipmen Dimensions and Mold Relaed Dimensions 4 Nozzle Sroke 5 φ To Hopper Moun Level 4φ3.5 drill for Ejecor Rod φ Movable Plaen φ U 5 4M6 Deph 34 Takeou Robo Mouning Tap 6M Deph 6 Mold Mouning Tap Top of Saionary Plaen

4 8 8 Elecric Servo Drive Injecion Uni Uni Clamping Uni J8ADS Iem 3U 6U U Screw Diameer Theoreical Injecion Capaciy cm Injecion Capaciy(GPPS) g Injecion Pressure(Max.) MPa{kgf/cm } 7{75} 3{7} 7{} 7{75} 5{9} 65{68} 3{36} 3{36} 7{75} 5{9} 7{} Holding Pressure(Max.) MPa{kgf/cm } 45{49} 3{7} 57{6} 45{49} 95{98} 5{53} 9{96} 75{8} 45{49} 5{9} 57{6} /s cm 3 /s Plasicizing Capaciy(GPPS) kg/h Screw Speed min Injecion Pressure(Max.) MPa{kgf/cm } 7{75} 3{7} 7{} 7{75} 5{9} 65{68} Holding Pressure(Max.) MPa{kgf/cm } 45{49} 3{7} 57{6} 45{49} 95{98} 5{53} /s cm 3 /s Plasicizing Capaciy(GPPS) kg/h Screw Speed min Injecion Pressure(Max.) MPa{kgf/cm } 7{75} 3{7} 7{} 7{75} 5{9} 65{68} 3{36} 3{36} 7{75} 5{9} 7{} Holding Pressure(Max.) MPa{kgf/cm } 45{49} 3{7} 57{6} 45{49} 95{98} 5{53} 9{96} 75{8} 45{49} 5{9} 57{6} /s cm 3 /s Plasicizing Capaciy(GPPS) kg/h Screw Speed min Nozzle Touch Force kn{f} 9.6{.}Cener Touch 4.5{.5}Cener Touch Nozzle Sroke from Plaen 5 Barrel Temperaure Conrol Open Nozzle Barrel 3 Nozzle Barrel 4 Nozzle Heaer Waage Clamping Force kn{f} 8{8.6} Dayligh Opening(Max.) 83 Opening Sroke(Max.) 3 5~5 Disance Beween Tiebars(H V) 4 4 Plaen Size(H V) Locaing Ring Diameer kn{f} φ7 / Poin(Cener) φ3.5 / 4 Poins 3.4{3.3} 8 Machine Weigh Machine Dimensions(L W H) m Sandard High Speed(Opion) Ex. Holding Pressure(Opion).Maximum injecion pressure and maximum holding pressure may be resriced due o molding condiion..the heoreical injecion capaciy is(cross secional area of barrel) (sroke of screw). 3.The injecion capaciy is applicable for GPPS and variable according o he grade of resin, molding condiions and mold. 4.The plasicizing rae is applicable for GPPS. 5.PC, HPVC, oher engineering plasic, ec., low emperaure seing and high speed molding may require a high orque depending on he grade or molding condiions. Please conac us if you plan. Noe:.Due o coninual improvemens, specificaions are subjec o change wihou noice..acual figures of he specificaion will vary depending on final machine configuraion. Please conac us if you require more specific daa. 3.Performance specificaions are based on heoreical daa. 4.High speed injecion and Ex. holding pressure injecion are opional. 5.MPa=. kgf/cm,kn=.f M8 3 3 φ M8 Deph φ U 7 U/φ5 8 8 Ejecor Rod φ5 Max. Sroke M8 3 φ M8 Deph 6 φ64 φ7 φ5 +. M6 Deph 7 Min. 5 Max. 5 Equipmen Dimensions and Mold Relaed Dimensions 3975(3U) 49(6U) 445( U/φ5 8) 4645( U/φ3 35 ) (3U) 56(6U) 477( U/φ5 8) ( U/φ3 35 ) (3U) 59(6U) 59(U) 468(3U/6U) 53(U) 697(3U) 87(6U) 3(U) Waer Inle Rc3/8(Nonoperaion Side) 4Drill Waer Oule Rc3/8(Nonoperaion Side) (Hole for Leveling Pads) U Nozzle Sroke 38.5 U/φ To Saionary Plaen Top 3794 φ8 M Deph SR φ3.4 33(3U) 38(6U) 3(U) φ5 +. 4φ3.5 drill for Ejecor Rod To Hopper Moun Level 5 5 3U Movable Plaen 3(U/φ5 8) 48(U/φ ) 7 φ φ8 7 SR 957(3U/6U) 34(U) 387(3U/6U) 57(3U/6U) 478(U) 656(U) 45 96M6 Deph 34 Mold Mouning Tap (3U/6U) 3(U) 5 5 4M6 Deph 34 Takeou Robo Mouning Tap 6U/U 65 5 Top of Saionary Plaen

5 Elecric Servo Drive Injecion Uni Uni Clamping Uni JADS Iem 6U U 8U Screw Diameer Theoreical Injecion Capaciy cm Injecion Capaciy(GPPS) g Injecion Pressure(Max.) MPa{kgf/cm } 7{75} 5{9} 65{68} 3{36} 3{36} 7{75} 5{9} 7{} 6{65} 99{} 57{6} Holding Pressure(Max.) MPa{kgf/cm } 45{49} 95{98} 5{53} 9{96} 75{8} 45{49} 5{9} 57{6} 36{} 8{8} 43{45} /s cm 3 /s Plasicizing Capaciy(GPPS) kg/h Screw Speed min Injecion Pressure(Max.) MPa{kgf/cm } 7{75} 5{9} 65{68} Holding Pressure(Max.) MPa{kgf/cm } 45{49} 95{98} 5{53} /s cm 3 /s Plasicizing Capaciy(GPPS) kg/h Screw Speed min Injecion Pressure(Max.) MPa{kgf/cm } 7{75} 5{9} 65{68} 3{36} 3{36} 7{75} 5{9} 7{} 6{65} 99{} 57{6} Holding Pressure(Max.) MPa{kgf/cm } 45{49} 95{98} 5{53} 9{96} 75{8} 45{49} 5{9} 57{6} 36{} 8{8} 43{45} /s cm 3 /s Plasicizing Capaciy(GPPS) kg/h Screw Speed min Nozzle Touch Force kn{f} 9.6{.}Cener Touch 4.5{.5}Cener Touch Nozzle Sroke from Plaen Barrel Temperaure Conrol 5 Barrel 4 Nozzle Heaer Waage Clamping Force kn{f} {} Dayligh Opening(Max.) 9 Opening Sroke(Max.) 36 5~55 Disance Beween Tiebars(H V) Plaen Size(H V) Locaing Ring Diameer Machine Weigh kn{f} φ7 / Poin(Cener) φ3.5 / 4 Poins 3.4{3.3} Machine Dimensions(L W H) m Sandard High Speed(Opion) Ex. Holding Pressure(Opion).Maximum injecion pressure and maximum holding pressure may be resriced due o molding condiion..the heoreical injecion capaciy is(cross secional area of barrel) (sroke of screw). 3.The injecion capaciy is applicable for GPPS and variable according o he grade of resin, molding condiions and mold. 4.The plasicizing rae is applicable for GPPS. 5.PC, HPVC, oher engineering plasic, ec., low emperaure seing and high speed molding may require a high orque depending on he grade or molding condiions. Please conac us if you plan. Noe:.Due o coninual improvemens, specificaions are subjec o change wihou noice..acual figures of he specificaion will vary depending on final machine configuraion. Please conac us if you require more specific daa. 3.Performance specificaions are based on heoreical daa. 4.High speed injecion and Ex. holding pressure injecion are opional. 5.MPa=. kgf/cm,kn=.f M8 φ U Ejecor Rod φ5 Max. Sroke φ7 3 M8 Deph 3 φ5 +. φ M6 Deph 7 437(6U) 4638(U/φ5 8) 4833(U/φ3 35 ) 4948(8U) 78(6U) 499(U/φ5 8) (U/φ3 35 ) (8U) 9 58 Min. 5 Max. 55 Equipmen Dimensions and Mold Relaed Dimensions 7 U/φ To Saionary Plaen Top 59(6U) 593(U) 593(8U) 363(6U) 347(U/8U) 5 Waer Inle Rc3/8(Nonoperaion Side) Waer Oule Rc3/8(Nonoperaion Side) Nozzle Sroke M8 Deph φ (U) 8(8U) 8 To Hopper Moun Level (U) 5.5(8U) U/φ3 35 / 8U 4φ3.5 drill for Ejecor Rod M Deph Movable Plaen 53(6U) 548(U/8U) 87(6U) 9(U/8U) 4Drill (Hole for Leveling Pads) 95(U/φ5 8) 9(U/φ3 35 ) 5(8U) φ5 +. φ8 7 SR M6 Deph 34 Mold Mouning Tap 957(6U) 34(U/8U) 387(6U) 57(6U) 478(U/8U) 656(U/8U) 5 5 4M6 Deph 34 Takeou Robo Mouning Tap (6U) 9(U/8U) 65 6 Top of Saionary Plaen

6 Elecric Servo Drive Injecion Uni Uni Clamping Uni J3ADS Iem 6U U 8U Screw Diameer Theoreical Injecion Capaciy cm Injecion Capaciy(GPPS) g Injecion Pressure(Max.) MPa{kgf/cm } 7{75} 5{9} 65{68} 3{36} 3{36} 7{75} 5{9} 7{} 6{65} 99{} 57{6} Holding Pressure(Max.) MPa{kgf/cm } 45{49} 95{98} 5{53} 9{96} 75{8} 45{49} 5{9} 57{6} 36{} 8{8} 43{45} /s cm 3 /s Plasicizing Capaciy(GPPS) kg/h Screw Speed min Injecion Pressure(Max.) MPa{kgf/cm } 7{75} 5{9} 65{68} 3{36} 3{36} 7{75} 5{9} 7{} 6{65} 99{} 57{6} Holding Pressure(Max.) MPa{kgf/cm } 45{49} 95{98} 5{53} 9{96} 75{8} 45{49} 5{9} 57{6} 36{} 8{8} 43{45} /s cm 3 /s Plasicizing Capaciy(GPPS) kg/h Screw Speed min Injecion Pressure(Max.) MPa{kgf/cm } 7{75} 5{9} 65{68} 3{36} 3{36} 7{75} 5{9} 7{} 6{65} 99{} 57{6} Holding Pressure(Max.) MPa{kgf/cm } 45{49} 95{98} 5{53} 9{96} 75{8} 45{49} 5{9} 57{6} 36{} 8{8} 43{45} /s cm 3 /s Plasicizing Capaciy(GPPS) kg/h Screw Speed min Nozzle Touch Force kn{f} 9.6{.}Cener Touch 4.5{.5}Cener Touch Nozzle Sroke from Plaen Barrel Temperaure Conrol 5 Barrel 4 Nozzle Heaer Waage Clamping Force kn{f} 3{33} Dayligh Opening(Max.) 95 Opening Sroke(Max.) 5~55 Disance Beween Tiebars(H V) 53 5 Plaen Size(H V) Locaing Ring Diameer Machine Weigh kn{f} φ7 / Poin(Cener) φ33 / 4 Poins 3.4{3.3} Machine Dimensions(L W H) m Sandard High Speed(Opion) Ex. Holding Pressure(Opion).Maximum injecion pressure and maximum holding pressure may be resriced due o molding condiion..the heoreical injecion capaciy is(cross secional area of barrel) (sroke of screw). 3.The injecion capaciy is applicable for GPPS and variable according o he grade of resin, molding condiions and mold. 4.The plasicizing rae is applicable for GPPS. 5.PC, HPVC, oher engineering plasic, ec., low emperaure seing and high speed molding may require a high orque depending on he grade or molding condiions. Please conac us if you plan. Noe:.Due o coninual improvemens, specificaions are subjec o change wihou noice..acual figures of he specificaion will vary depending on final machine configuraion. Please conac us if you require more specific daa. 3.Performance specificaions are based on heoreical daa. 4.High speed injecion and Ex. holding pressure injecion are opional. 5.MPa=. kgf/cm,kn=.f M8 3 φ Ejecor Rod φ5 7 6U Max. Sroke M8 Deph φ7 3 φ M6 Deph 7 Min. 5 Max. 55 Equipmen Dimensions and Mold Relaed Dimensions 4435(6U) 4757(U/φ5 8) 495(U/φ ) 565(8U) 7 3 U/φ M8 Deph 7 6 φ64 5(6U) 57(U/φ5 8) 7(U/φ3 35 ) 835(8U) 585 To Saionary Plaen Top 5(6U) 59(U) 59(8U) 6(U) 8(8U) 8 375(6U) 359(U/8U) φ Nozzle Sroke (U) 5.5(8U) U/φ3 35 / 8U 69 5 To Hopper Moun Level Waer Inle Rc3/8(Nonoperaion Side) Waer Oule Rc3/8(Nonoperaion Side) 433 drill for Ejecor Rod M Deph Movable Plaen φ8 SR 55(6U) 56(U/8U) 7 885(6U) 95(U/8U) 4Drill (Hole for Leveling Pads) 93(U/φ3 35 ) 38(8U) φ (6U) 34(U/8U) 387(6U) 57(6U) 478(U/8U) 656(U/8U) 5 5 4M Deph 43 Takeou Robo Mouning Tap 8 76M6 Deph 34 Mold Mouning Tap 636 6(6U) 9(U/8U) 75 9 Top of Saionary Plaen

7 Elecric Servo Drive Injecion Uni Uni Clamping Uni J8ADS Iem U 8U 3U Screw Diameer Theoreical Injecion Capaciy cm Injecion Capaciy(GPPS) g Injecion Pressure(Max.) MPa{kgf/cm } 3{36} 3{36} 7{75} 5{9} 7{} 6{65} 99{} 57{6} 5{55} {9} 54{57} Holding Pressure(Max.) MPa{kgf/cm } 9{96} 75{8} 45{49} 5{9} 57{6} 36{} 8{8} 43{45} 7{3} 7{} {4} /s cm 3 /s Plasicizing Capaciy(GPPS) kg/h Screw Speed min Injecion Pressure(Max.) MPa{kgf/cm } 3{36} 3{36} 7{75} 5{9} 7{} 6{65} 99{} 57{6} 5{55} {9} 54{57} Holding Pressure(Max.) MPa{kgf/cm } 9{96} 75{8} 45{49} 5{9} 57{6} 36{} 8{8} 43{45} 7{3} 7{} {4} /s cm 3 /s Plasicizing Capaciy(GPPS) kg/h Screw Speed min Injecion Pressure(Max.) MPa{kgf/cm } 3{36} 3{36} 7{75} 5{9} 7{} 6{65} 99{} 57{6} 5{55} {9} 54{57} Holding Pressure(Max.) MPa{kgf/cm } 9{96} 75{8} 45{49} 5{9} 57{6} 36{} 8{8} 43{45} 7{3} 7{} {4} /s cm 3 /s Plasicizing Capaciy(GPPS) kg/h Screw Speed min Nozzle Touch Force kn{f} 4.5{.5}Cener Touch Nozzle Sroke from Plaen 5 Barrel Temperaure Conrol Barrel 4 Nozzle Barrel 4 Nozzle Heaer Waage Clamping Force kn{f} 8{84} Dayligh Opening(Max.) 7 Opening Sroke(Max.) 47 ~6 Disance Beween Tiebars(H V) Plaen Size(H V) Locaing Ring Diameer kn{f} φ7 / Poin(Cener) φ / 8 Poins 34.3{3.5} 3 Machine Weigh Machine Dimensions(L W H) m Sandard High Speed(Opion) Ex. Holding Pressure(Opion).Maximum injecion pressure and maximum holding pressure may be resriced due o molding condiion..the heoreical injecion capaciy is(cross secional area of barrel) (sroke of screw). 3.The injecion capaciy is applicable for GPPS and variable according o he grade of resin, molding condiions and mold. 4.The plasicizing rae is applicable for GPPS. 5.PC, HPVC, oher engineering plasic, ec., low emperaure seing and high speed molding may require a high orque depending on he grade or molding condiions. Please conac us if you plan. Noe:.Due o coninual improvemens, specificaions are subjec o change wihou noice..acual figures of he specificaion will vary depending on final machine configuraion. Please conac us if you require more specific daa. 3.Performance specificaions are based on heoreical daa. 4.High speed injecion and Ex. holding pressure injecion are opional. 5.MPa=. kgf/cm,kn=.f M8 Deph φ 35 Ejecor Rod φ3 7 U/φ5 8 M φ69 3 Max. Sroke (U/φ5 8) 57(U/φ3 35 ) 533(8U) 573(3U) (U/φ5 8) 76(U/φ3 35 ) 876(8U) 348(3U) (U/8U) 4(3U) Waer Oule Rc3/8(Nonoperaion Side) M8 Deph φ7 3U φ φ64 M Deph 33 Min. Max. 6 Equipmen Dimensions and Mold Relaed Dimensions 6(U) 8(8U) (U) 5.5(8U) U/φ3 35 / 8U M Deph 368 Nozzle Sroke To Saionary Plaen Top M Deph4 φ8 7 SR 5 5 To Hopper Moun Level Waer Inle Rc3/8(Nonoperaion Side) φ drill for Ejecor Rod 5 5 U / 8U Movable Plaen φ (U/8U) 63(3U) 34(U/8U) (3U) 478(U/8U) 656(U/8U) 499(3U) 7(3U) 977(U/8U) 997(3U) 5Drill (Hole for Leveling Pads) 67 3(U/φ3 35 ) 45(8U) 67(3U) φ φ8 φ7 SR M Deph 33 Mold Mouning Tap 37(U/8U) 38(3U) 5 5 Band Heaer(Max.) 4M Deph 43 Takeou Robo Mouning Tap 3U 75 9 Top of Saionary Plaen

8 Elecric Servo Drive Sandard Equipmen Lis Opions Lis Iem Iem Iem Iem Clamping uni Injecion uni Open Nozzle(Tip ype)/ Injecion Unis up o 3U KC Nozzle/8U NF Barrel LSP screw(abrasionresisan ype)/8u Chromeplaed Screw/3U Screw Pullback Injecion Uni Swiveling Device(wih Limi Swich) Screw Cold Sar Prevenion Molding/Purging/Pause Temperaure Selec Auo Purging Circui Nozzle Rerac Selec Injecion/Meering Prograed Conrol Holding Pressure Conrol Selec Pullback Selec IVS Conro(l Holding Pressure Transfer by Speed Deecion) Barrel Temperaure Conrol (PID) Synchronous Temperaure Rise Conrol Hopper Flange Temperaure Conrol Sof Pack Servo Conrol HAVC(High Accuracy Volume Corol) IWCS(Injecion Weigh and Cushion Sabiliy)Cconrol Reverse seal Conrol Auo Grease Lubricaion Barrel Insulaion Cover Highperformance Plaen Suppor Low Vibraion Mold Open/Close Wide Plaen Fla Press Plaen (Saionary Side/Movable Side) Mold Open/Close and Ejecion Prograed Conrol Mold Proecion Funcion Elecricdriven Mold Thickness Adjusing Device Auo Clamp Force Seing Ejecor Plae Reurn Comfirmaion Circui Toggle Type Injecion Compression Funcion Parallel Moion Clamping Safey Device(Mechanical/Elecrical) Robo Mouning Holes Greasefree Toggle Bushing Auo Grease Lubricaion Servo Moor Wih Brake(Mold O/C EJ) Mold Open/Close : 4 Seps(Fixed) Ejecion : o 3 Seps(Variable) Amode Bmode Compression: o 6 Seps(Variable) Noe Noe Noe Injecion/Holding Pressure: o 6 Seps(Variable) Meering/Back Pressure: o 3 Seps(Variable) Screw Roaion During Mold Open/Close Ejec During Mold Open Injecion During Clamp Up Noe. Noe. Nozzle of 3U is one piece ype nozzle. Screw of injecion unis.3u,6u,u and 8U, LSP(Abrasionresisan ype)gp screw is equipped as sandard. Screw of injecion unis 3U, Chromeplaed GP screw is equipped as sandard. Noe 3. Noe 4. Noe 5. Noe 6. USB memory device as exernal memory is capable of soring of molding condiions. Screen Capure can be saved in PNG forma, and measuring daa can be saved in CSV forma The priner and he priner cables are opions. Maximum of 6 iems and alarms can be seleced ou of he following monior iems. Cycle ime Injecion ime 3Meering ime 4Max Injecion pressure 5Cushion posiion 6Holding pressure end posiion 7Holding pressure ransfer pressure 8Screw back pressure Meering orque 3Holding pressure ransfer speed 4Mold close ime 5Mold open ime 6Clamping force 7Shif sroke(havc) 8End speed(havc) Noe 7. Mainenance monior based on molding condiion Conroller Monior Ohers Muliouch Panel 5 TFT Color LCD Conroller Mulilanguage Selec(English, Chinese, Japanese) 3 Mold Condiions Sorage(Inernal Memory) Sof Sar Molding Self Diagnosics Funcion I/O Cusomize Funcion Molding Operaion Assis Funcion Help Funcion Popup Display Manual Browsing Funcion Sarup Safey Noice Molding Condiion MEMO Screen Capuure Files Can Be Sored o USB Memory Device USB Priner Por Overall Seing Screen Prehea Timer Produc Takeou Robo Circui Aended/Unaended Operaion Selec Acual Value Display Injecion/Meering Waveform Monior Injecion/Meering Waveform Sorage Osilloscope Waveform Monior Energy Consumpion and Regeneraion Monior Barrel Temperaure Monior Injecion Pressure Monior(IPM) Saisical Graph Producion Monior Cumlaive Operaing Hour Display Cycle Monior Molding Condiion Upper/Lower Limi Monior Inspecion and Mainenance Guide Heaer Sysem Alarm Injecion Pressure Overshoo Alarm Servo Faul Alarm Grease Lubricaion Alarm Faul Alarm Buzz Alarm Hisory Se Value Hisory Safy Compliance o JIMS K Cooling Waer Closed Circui for Feed Throa Accessories(Mainenance Tools and Ejecor Rods,ec.) Noe 3 Noe 4 Noe 5 Noe 6 Noe 7 Injecion uni Clamping uni Uiliies J3ADS J5ADS J8ADS JADS J3ADS J8ADS Long Nozzle Shuoff Nozzle(Pneumaic Type and Hydraulic Type) KC Nozzle(3U) M7 Screw(Plasicizaion ype) HP Screw(High Dispersion Type) LSP Screw(Abrasionresisan Type)(3U) Chrome Plaed Screw(8U) Screws and Barrels for Opical Applicaion Screws and Barrels for Super Engineered Plasics Applicaion Special Screw Barrel Blower Cooling Uni Hopper Hopper Slide Device Highspeed injecion spec. Exended Holding Presure Time Longime Plasicizing Spec. Mold Plaen Hea Insulaion Bord (5 or ) Locaing Ring Air Je Core Pull Devices(Pneumaic Type and Hydraulic Type) Valve Gae Device(Pneumaic Type and Hydraulic Type) Coupler join (Hydraulic, Pneumaic) Hydraulic Power Pack (L or 6L)Inernal Uni Ejecor Gae Cuing Circui Unscrewing Moor Circui Produc Drop Deecor(Phooelecric) Chue Rejecing Produc Deecing Chue Tgroove Plaen Noe. Noe. Noe. 3 Noe. 4 Noe. 5 Mold Seup Device Noe. 5 Mold Clamper Device(Pneumaic Type, Hydraulic Type, Magne Type) Easy Mold Clamper(Easy clamp) Clamping Force Monioring Funcion Clamping Force Feedback Conrol Toal Power Capaciy Machine 3U 3U 6U 3U 6U U 6U U 8U 6U U 8U U 8U 3U Sandard Injecion Toal Power Capaciy(kVA) Oher Elecrical insrumenaion and conrol High Speed Injecion Ex. Holding Pressure Mulilanguage Selec( Language Addiional) Noe. 6 Cenralized Conrol Sysem NET Mold Temperaure Display(wih Mold Temperaure Upper/Lower Limi Alarm) Mold Temperaure Conrol Device(wih Mold Temperaure Upper/Lower Limi Alarm) Mold Cooling Waer Circui(Insalled on bed)max. 6 C Cooling Waer Alarm Leveling Pad for Insallaion Machine Movemen Prevenion Device(Anchor Bols) Roary Warning Ligh(Single Color, 3 Colors) Expor Specificaion Designaed Color(Bed and Cover) Noe. 7 Noe. 8 Noe. Pneumaically acuaed shuoff nozzle or hydraulically acuaed shuoff nozzle can be seleced. When selecing a hydraulically acuaed nozzle, discussion wih JSW is required. Noe. Conac us for he special screws. Noe 3. Specificaion for reducing moor load during longime holding pressure molding under high holding pressure Noe 4. Specificaion for reducing moor load during high plasicizaion orque molding Noe 5. When hermal insulaion boards or magne mold clampers are equipped, heir hicknesses should be considered for calculaing he nozzle inserion amoun. In addiion, please noe ha he usable mold hickness range will change. Noe 6. English and Chinese are equipped as sandard. Noe 7. Regarding expor specificaions, discussion wih JSW is required in some cases, depending upon he expor desinaions. Noe 8. Please designae colors, referring o color Cooling Waer Capaciy for Barrel Temperaure Conrol Machine 3U 6U U 8U 3U Cooling Waer Capaciy for Barrel Temperaure Conrol(m 3 /h)..3.4 Noe:The above figures do no include he required quaniy of waer for he mold eperaure. Noe:. Toal Power capaciy does no include exernal oules.. We recoend ha he raed inerruping curren of he main power supply breaker is more han 5kA a ACV/46V.

Specifications. ~Reliable Sales and Service Network~ Shanghai Hong Kong Shenzhen Hanoi Bangkok Gurgaon. Detroit. Chicago

Specifications. ~Reliable Sales and Service Network~ Shanghai Hong Kong Shenzhen Hanoi Bangkok Gurgaon. Detroit. Chicago ~Reliable Sales and Service Nework~ Elecric Servo Drive Shanghai Hong Kong Shenzhen Hanoi Bangkok Gurgaon Kuala Lumpur Singapore Jakara Tokyo Headquarer Taipei Tainan Manila Ho Chi Minh Los Angels Chicago