All Electric Servo Drive Injection Molding Machine
|
|
- Hillary Reeves
- 6 years ago
- Views:
Transcription
1 Shanghai Hanau(Germany) Hong Kong Lyon Barcelona Shenzhen Hanoi Bangkok Gurgaon Singapore Jakarta Seoul Tokyo Headquarter Taipei Tainan Manila Los Angels Overseas Office Agent Chicago Detroit Sao Paulo All Electric Servo Drive URL Division Gate City Ohsaki-West Tower, 11-1, Osaki 1-chome, Shinagawa-ku, Head Quarter: Tokyo , Japan Phone: Fax: ~4 URL JSW Plastics Machinery Inc. Head Office: South Promenade Ave., Unit 4, Corona, California 99, U.S.A. Phone: Fax: Chicago Office: 40 Capital Drive, Suite, Lake Zurich, Illinois 6004,U.S.A. Phone: Fax: Detroit Office: Catherine Industrial Drive, Suite 40, Novi, Michigan 4, U.S.A. Phone: The Japan Steel Works (Singapore) Pte. Ltd. 1 Gul Lane 6941 Singapore Phone: Fax: PT. JSW Plastics Machinery Indonesia Gajah Building Unit K, Jl.Dr.Saharjo No.111 Tebet,Jakarta Selatan 1, Indonesia Phone: Fax: JSW Plastics Machinery (Philippines) Inc. Unit 0 Alabang Business Tower, 116 Acacia Avenue, Madrigal Business Park Alabang Muntinlupa City Metro Manila 11, Philippines Phone: Fax: JSW Plastics Machinery (M) SDN. BHD. D6--G,(Ground Floor), Block D6, Pusat Perdagangan Dana 1, Jalan Pju 1A/46, 401, Petaling Jaya, Selangor Darul Ehsan, Malaysia Phone: Fax: The Japan Steel Works (Thailand) Co., Ltd. /6 JST Building 4th Fl., Moo King Kaew Road, Rachatewa, Bangplee, Samutprakarn 40 Thailand Phone: Fax: JSW Plastics Machinery (H.K.) Co., Ltd. Room 90, Corporation Park, 11 On Lai Street, Shatin N.T., Hong Kong Phone: Fax: JSW Injection Machine Maintenance (Shenzhen) Co., Ltd. 1F, YiBen Electronic & Business Industrial Park, No.6 Chaguang Road, Xili Town, Nanshan District, Shenzhen City,Guangdong Province,, People s Repubulic of China Phone: Fax: JSW Machinery Trading (Shanghai) Co., Ltd. A, Strength Plaza, No.600-4, Tianshan Road, Shanghai, 0001, People s Republic of China Phone: Fax: JSW Plastics Machinery (TAIWAN) Corp. Head Office: 1F., No.1, Da Hu 1st Road, Guieshan Shiang Taoyuan Country Taiwan, R.O.C. Phone: Fax: Tainan Office: 1F.,-, No.69-, Xiaodong Road, Yongkang City, Tainan Country Taiwan, R.O.C. Phone: Fax: Japan Steel Works India Private Limited 611, Time Tower, MG Rood, Sector, Gurgaon, haryana, 01, India Phone: , Fax: JSW Plastics Machinery Vietnam Ltd. Room, Techno-Center Thang Long Industrial Park Dong Anh District, Hanoi, Viet Nam Phone: Fax:
2 High Speed(Option) Standard J0ADS 00H 90H 1.(40) 1.1(46).01(1) 1.1(46).09().().().60(66).().0().6().6(60) Theoretical Injection Capacity in(cm ) 1.9(6) 1.(99).46(6) 1.0(49).6(46).() 41.9(6) 4.1(90) 64.6(9) Injection Capacity(GP-PS) oz(g).(06) 9.6() 11.() 11.(1) 14.9(41) 1.().0(6).6() 4.0(96) psi(mpa) 6,60(),4(19),40(14),940,60(1) 1,0(14),(9),60(1) 1,6(149) psi(mpa),90() 4,9(1) 0,(140) 0,90(1),(161) 19,40(14) 0,(0),(161) 19,0(1) Injection Speed in/s(mm/s) 9.4(40) Injection Rate in /s(cm /s) 1.4(0) 4.(99) 9.9(490) 16.(66) 1.() (61) Plasticizing Rate( ) oz/s(kg/h) 1.() 1.0(14).() 1.1(11) 1.60(16) 1.9(19) 1.9(19).6().9(6) psi(mpa) 6,60(),4(19),40(14),940,60(1) 1,0(14),(9),60(1) 1,6(149) psi(mpa),90() 4,9(1) 0,(140) 0,90(1),(161) 19,40(14) 0,(0),(161) 19,0(1) Injection Speed in/s(mm/s) 1.99(0) Injection Rate in /s(cm /s).(41) (64) 0.(499) 40.4(66) 4.4(9) 4.(1) 6.4(94) 6.1(99) Plasticizing Rate( ) oz/s(kg/h) 1.() 1.0(14).() 1.(161).().69() 1.9(19).6().9(6) m Nozzle Touch Force U.S.ton(kN) 4.4(9.)Center Nozzle Touch from Platen 1.9() Daylight Opening() Opening Stroke() Distance Between Tie-bars(H V) Platen Size(H V) Locating Ring Diameter Barrel4 Nozzle (.) 1.4(11.1) 1.9(11.6) Machine Dimensions(L W H) ft(m) ( ) ( ) ( ).The theoretical injection capacity is(cross sectional area of barrel) (stroke of screw)..the injection capacity is applicable for GP-PS and variable according to the grade of resin,.pc, HPVC, other engineering plastic, etc., low temperature setting.actual figures of the specification will vary depending on final machine configuration..performance specifications are based on theoretical data..1mpa=. kgf/cm,1kn=0.tf 6.0(160) 11.1(00) Open Nozzle(Tip Type) (160) 4.4() 1.6() 9.0~6.(0~60).9.(6 90) (90 0) 4.0(1.6) 1 Points 4.9(44.).906(1) Barrel Nozzle1 6.0(160).6(0) 1..(90).(90).1() 4-M1 Depth 0.9() 11.() 90H.(60) 00H 1.6(0) M Depth.(60) 00H 0.6(1).(0).(69) Dia..4(900) 1.4() 4.(11) 1.4() ().(9)Dia 9.4 (9) 6. (16).(140) (40) (60). () 00H / 4...1(9).4() 6.(1) 4. ().6 (6).(19) 00H 9.4(9) 1-1. Dia.(000).9() (414) M Depth 0.9() (40)(90) 9.4(00) M0 Depth 1. Take-out Robot Mounting Tap (9) 00H 4.(69) 6.(04) 90H 9.0(69) 14.1(1) 00H 1.(6) H. (). () 4.Dia.( 0 ) (1.6) 6.(16.) 19.(49.) 6.1 (14.).4(1) 4.(11).1 Dia (0) Forward.0 Position () 0.6 (1) 0. 6 Dia..0(66) 1.(11) 4.1(94).4(69) 9.6(114) 00H 60.(19) 61.(14) 90H SR0..4 (SR) (60) Metric specification is in parenthesis 1 -/-11UNC Depth 1. Tap for Mold mounting (0).(1) 1- Dia (0).906(1) 1.1()Dia 4.(0) -1.0Drill 4.1(Hole for Leveling Pad) () 6.6 (16) Water Inlet/Outlet /-1NPT(Internal Thread) () /-11UNC Depth 0.9().1(19) 00H 9.9(00) 1.(06) 90H.9() 00H.(1) 9.1(64) 90H 1. Forward Position.0() Stroke 1.6() Min. 9.0(0) 6.(60) (mm) 96-M16 Depth 4
3 High Speed(Option) Standard J0ADS 90H 1.1(46).09().().().60(66).().6().6(60) Theoretical Injection Capacity in(cm ) 1.0(49).6(46).() 41.9(6) 4.1(90) 64.6(9) Injection Capacity(GP-PS) oz(g) 11.(1) 14.9(41) 1.().0(6).6() 4.0(96) psi(mpa) (1) (14) (9) 60(1) 16(149) psi(mpa) 090(1) (161) 1940(14) 0(0) (161) 190(1) 6.0(160) 6.0(160) Injection Rate in /s(cm /s) 16.(66) 1.() (61) Plasticizing Rate( ) oz/s(kg/h) 1.1(11) 1.60(16) 1.9(19) 1.9(19).6().9(6) psi(mpa) (1) (14) (9) 60(1) 16(149) psi(mpa) 090(1) (161) 1940(14) 0(0) (161) 190(1) 11.1(00).6(0) Injection Rate in /s(cm /s) 0.(499) 40.4(66) 4.4(9) 4.(1) 6.4(94) 6.1(99) Plasticizing Rate( ) oz/s(kg/h) 1.(161).().69() 1.9(19).6().9(6) m Nozzle Touch Force from Platen U.S.ton(kN) Daylight Opening() Opening Stroke() Distance Between Tie-bars(H V) Platen Size(H V) Locating Ring Diameter.The theoretical injection capacity is(cross sectional area of barrel) (stroke of screw)..the injection capacity is applicable for GP-PS and variable according to the grade of resin,.pc, HPVC, other engineering plastic, etc., low temperature setting.actual figures of the specification will vary depending on final machine configuration..performance specifications are based on theoretical data..1mpa=. kgf/cm,1kn=0.tf (9.)Center Nozzle Touch 1.9() Open Nozzle(Tip Type) Barrel Nozzle1 09.1() 1.9().6(600) 9.4~.4(~0).4 4.0(0 60) ( 9) 4.0(1.6) 1 points 6.6(9.0).906(1) 1.6(1.4) 14.(1.0) Machine Dimensions(L W H) ft(m) ( ) ( ) 1..(9)Dia. 6.(16) 1.4() 40.6(0) 1.4() 1. () () 4. M Depth 0.6(1) 0.(19).1(94).6() 4.(0) 4.4(10) 1.().6 (6).1() 4-M1 90H Depth 0.9() 11.().(140) (40) (60) (9) 1.6(0).(0). Dia. (69) 1.1(060) 6-M0 Depth M Take-out Robot () () Depth 0.9() (40).4 (40) Mounting Tap (90) 9.4(9) Dia (140) (44) 4.(11).0() 6.9(144) 49.0(14) Water Inlet/Outlet /-1NPT(Internal thread). (). () Dia.( 0 ) 6.6(646).1(6) 6. 90H 11.(99) 140.4(66) 169.1(49) 90H 6.(16.) (49.) (14.).(000) Forward.0 Position() 0.6(1) 0. (1.6) Dia. (0) 6 Dia. 9-/-11UNC-Depth1. Tap for Mold Mounting SR0. (SR).4 (60) (190) Metric specification is in parenthesis 1- Dia. 6.(19) 6.1(1604) 90H 0.(0).(1) 4.1() 140.9(0) 41.9(614) 9.0(69) 6.6(16) -1.0Drill (Hole For Leveling Pad).906(1) 1.1()Dia. Stroke.6(600) () /-1UNC- Depth0.9() Min. 9.4().4(0) 1 (mm) 6.(90) 1.9(00).(11) 90H 19.(490) Forward Position.0() 9-M16 Depth 4.(1) 91.1(14) 90H
4 (mm) JADS 90H 1H 1.1(46).09().6().().().60(66).6(60).().60(66).99(6) 11.11(00).1 Theoretical Injection Capacity in(cm ) 1.0(49).6(46).() 41.9(6) 4.1(90) 64.6(9) 6.61(6).06(161) 1.49(166) Injection Capacity(GP-PS) oz(g) 11.(1) 14.9(41) 1.().0(6).6() 4.0(96).9(94) 4.(1).4(11) psi(mpa) (1) (14) (9) 60(1) 16(149) 49(41) 6(1) 16(149) Standard High Speed(Option) psi(mpa) 090(1) (161) 1940(14) 0(0) (161) 190(1) (16) 640(16) 1940(14) 6.0(160) 6.0(160) 6.0(160) Injection Rate in /s(cm /s) 16.(66) 1.() (61).4 44.(6) 4.1() Plasticizing Rate( ) oz/s(kg/h) 1.1(11) 1.60(16) 1.9(19) 1.9(19).6().9(6).().1() 4.(41) psi(mpa) (1) (14) (9) 60(1) 16(149) 49(41) 6(1) 16(149) psi(mpa) 090(1) (161) 1940(14) 0(0) (161) 190(1) (16) 640(16) 1940(14) 11.1(00).6(0) 11.1(00) Injection Rate in /s(cm /s) 0.(499) 40.4(66) 4.4(9) 4.(1) 6.4(94) 6.1(99) 6.6(6).1(161) 1.(166) Plasticizing Rate( ) oz/s(kg/h) 1.(161).().69() 1.9(19).6().9(6).().1() 4.(41) m Nozzle Touch Force U.S.ton(kN) from Platen Daylight Opening() Opening Stroke() Distance Between Tie-bars(H V) Platen Size(H V) Locating Ring Diameter (16.1) 4.4(9.)Center Nozzle Touch 1.9() Open Nozzle(Tip Type) Barrel Nozzle (440).(140).6(00) 11.11~6(00~0) 1.9.4( 0) 4. 4.(116 ) 4.0(1.6) 1 points 6.6(9.0).906(1) 1.4(1.0) (1.) Machine Dimensions(L W H) ft(m) ( ) ( ) ( ).(9)Dia. 6.(16) 90H.(190) 1H. (140).1(19) 4.0(6) 6.1(91) 9.() (1160) 1.4 () 4. (61) (61) 4. () 4.4() 4..1() 90H / 1H 1.6 (40) (60).4. () 1.() 90H 1.(444) 1H 9.4(9) 90H 9.1(1) 1H 1-1. Dia. 19.(0).1(0) 4-M1 Depth 0.9() 11.() 90H 1.() 1H 1.6(0) M Depth 0.6(1).(0). Dia. (69)Dia. 4. () 9.4(9).(000).9() (44) 1.. (40)(140) M1 Depth 0.9() (60) 99.6(609) 90H (00) 1H 19.1(9) 141.(601).(40) 90H 1(41) 1H 49.6(160).9(140) Water Inlet/Outlet /-1NPT(Internal Thread) 11.1(00) 11.1(00).9(1 0 )Dia. (1.6) 4-M0 Depth 1. Take-out Robot Mounting Tap Forward Position.1Dia. (0) SR0. (SR) 0.6(1.) 1.6(4.) 6.1 (14.) 6.(19) 4.9(19) 0. 6 Dia. 0-/4-UNC-Depth 1. Taps Mold Mounting.4 (60).6(190).4(66) 1.(16).0 0. () (0) Metric specification is in parenthesis 60.(19) 61.(14) 90H 6.0(14) 1H.4().4() 14.(00).906(1) 1.1Dia.( Dia.) 1- Dia. Stroke.6(140) 1 () 4 4.(0) -1.0Drill.9 (0)(Hole for Leveling Pad) /-11UNC- Depth0.9() Min (00) 6(0) 9.9(00) 1.(06) 90H 4.(1) 1H.(1) 9.1(64) 90H 9.9 1H 6.6 (16) H.4(644) 1H 0.() Forward Position.0().The theoretical injection capacity is( cross sectional area of barrel) ( stroke of screw)..the injection capacity is applicable for GP-PS and variable according to the grade of resin,.pc, HPVC, other engineering plastic, etc., low temperature setting.actual figures of the specification will vary depending on final machine configuration..performance specifications are based on theoretical data..1mpa=. kgf/cm,1kn=0.tf Dia M0 Depth 4
5 High Speed(Option) Standard J4ADS 90H 1H 00H.().60(66).().60(66).99(6).1.1.6(9).6(60) 11.11(00) 16.6(40) Theoretical Injection Capacity in(cm ) 41.9(6) 4.1(90) 64.6(9) 6.61(6).06(161) 1.49(166) 14.0().9(9) Injection Capacity(GP-PS) oz(g).0(6).6() 4.0(96).9(94) 4.(1).4(11) 4.(11) 9.6(41) psi(mpa) (9) 60(1) 16(149) 49(41) 6(1) 16(149) 60(190) 90(1) psi(mpa) 0(0) (161) 190(1) (16) 640(16) 1940(14) (11) 0600(14) 6.0(160) 6.0(160) 6.0(160) Injection Rate in /s(cm /s)..4 9.(61).4 44.(6) 4.1() 4.1() 64.9(64) Plasticizing Rate( ) oz/s(kg/h) 1.9(19).6().9(6).().1() 4.(41) 4.1(40) 4.61(40) 00 psi(mpa) (9) 60(1) 16(149) 49(41) 6(1) 16(149) psi(mpa) 0(0) (161) 190(1) (16) 640(16) 1940(14).6(0) 11.1(00) Not Applicable Injection Rate in /s(cm /s) 4.(1) 6.4(94) 6.1(99) 6.6(6).1(161) 1.(166) Plasticizing Rate( ) oz/s(kg/h) 1.9(19).6().9(6).().1() 4.(41) m Nozzle Touch Force from Platen U.S.ton(kN) Daylight Opening() Opening Stroke() Distance Between Tie-bars(H V) Platen Size(H V) Locating Ring Diameter (9.)Center Nozzle Touch Open Nozzle(Tip type) 1.9() Barrel Nozzle (440) 66.9(0) 1.(00) 1.0~.44(~900).4 1.9(900 ) (0 1) 4.0(1.6) 1 points 11.1(99.0).0() 6.6(9.0) Open Nozzle.1(1.0) 4.(.).(6.) Machine Dimensions(L W H) ft(m) ( ).0.0,(..14.1) ( ).The theoretical injection capacity is(cross sectional area of barrel) (stroke of screw)..the injection capacity is applicable for GP-PS and variable according to the grade of resin,.pc, HPVC, other engineering plastic, etc., low temperature setting.actual figures of the specification will vary depending on final machine configuration..performance specifications are based on theoretical data..1mpa=. kgf/cm,1kn=0.tf (1) 4.(114).9(9) 1.4 () 6.(16) 90H.(190) 1H.9(00) 00H (11) (0) ().0 (6) 19.(0) 90H/1H.6() 00H 6.6(00) 90H/1H 9.6() 00H 6.1(14) 90H/1H 9.1() 00H 4-M0 Depth 1. Take-out Robot Mounting Tap 4-M1 Depth 0.9() 4. (mm) 1.1(04) 90H 4.6 1H 40.6(6) 00H 146.4(19). 90H 1.(46) 1H 194.(49) 00H 0.6(1.) 90H/1H.6(90.) 00H 6.(1441) 00H 1.(06) 00H (1).1(14) ().0() 90H/1H 6-1.0Drill 90H/1H -1.0Drill 00H (Hole for Leveling Pad).0 0. Forward Position() (0) 0. SR0. (SR).4 (60) 90H/1H.0 0. Forward Position() (0) 0. Water Inlet/Outlet /-1NPT(Internal Thread).0() 1.1()Dia..(1490) 00H 6.0(1) 90H/1H.0 (6) (160).1(14) H/1H 1.4(96) 00H (19) 4.0() 1.(99) 90H/1H 9.(91) 00H 4..1 () 90H 444 1H 49 00H 9.4(9) 90H 9.1(1) 1H 19.4(49) 00H 90H 1H 0 00H Dia..(9)Dia. 90H.(9)Dia. 1H 4.6(11)Dia. 00H 1.(16). (40) 11.1 (00) 11.1 (00) Dia.(1 0 ) (1.6).9D ia.(φ1 0 ) (1.6).1 Dia. (0) 1.6(4.4) 90H/1H 16.6(40.) 00H 6Dia..1 Dia. (0) 6.1 (14.) 6Dia (0) 90H/1H.(11) 00H 00H 6.4(1609) 90H 64.1(169) 1H/00H Stroke 1.(00) /-11UNC 0.9() 4. (0) Min. 1.0().44(900) 1 6.4(9) 90H/1H.9(60) 00H.4(11) 90H 6.9(0) 1H 9.1(64) 00H 6.6(16) 0.9() 11-M0 Depth 4 91.(19) 90H 9.1(9) 1H 4.9(664) 00H 19.1(6) 90H/1H 6.9(99) 00H.(19) 1H /4-UNC- Depth Dia. SR0.6 (SR1) 60 Metric specification is in parenthesis 1- Dia. Forward Position.0() 4
6 Standard Equipment List Options List Injection unit Clamping unit Open Nozzle(Tip type)/(injection Units up to 1H) N000F Barrel Chrome-plated Screw Screw Pull-back Injection Unit Swiveling Device(with Limit Switch) Screw Cold Start Prevention Molding/Purging/Pause Temperature Select Auto Purging Circuit Nozzle Retract Select Injection/Metering Programmed Control Holding Pressure Control Select Pull-back Select IVS Control(Holding Pressure Transfer by Speed Detection) (PID) Synchronous Temperature Rise Control Hopper Flange Temperature Control Soft Pack Servo Control HAVC(High Accuracy Volume Cotrol) IWCS(Injection Weight and Cushion Stability)Ccontrol Reverse seal Control Auto Grease Lubrication High-performance Platen Support Low Vibration Mold Open/Close Wide Platen Flat Press Platen (Stationary side/movable side) Mold Open/Close and Ejection Programmed Control Mold Protection Function Electric-driven Mold Thickness Adjusting Device Auto Clamp Force Setting Clamp Force Display Clamp Force Feed Back Control Ejector Plate Return Comfirmation Circuit Toggle Type Injection Compression Function Parallel Motion Injection/Holding Pressure:1 to 6 Steps(Variable) Metering/Back Pressure:1 to Steps(Variable) Clamping Safety Device(Mechanical/Electrical) Robot Mounting Holes Grease-free Toggle Bushing Auto Grease Lubrication Mold Open/Close : 4 Steps(Fixed) Ejection : 1 to Steps(Variable) (Note 1) (Note ) A-mode B-mode Compression: 1 to 6 Steps(Variable) Screw Rotation During Mold Open/Close Eject During Mold Open Injection During Clamp Up (Note) 1. Nozzle of 00H is one piece type nozzle.. Screw of injection units 00H,, 90H and 1H, GP1 screw is equipped as standard. Screw of injection unit 00H, Hi-Melter MIII screw is equipped as standard.. USB memory device as external memory is capable of storing of molding conditions. 4. Screen Capture can be saved in PNG format, and measuring data can be saved in CSV format. The printer and the printer cables are options. 6. Maximum of 16 items and alarms can be selected out of the following monitor items. 1Cycle time Injection time Metering time 4Max Injection pressure Cushion position 6Holding pressure end position Holding pressure transfer pressure Screw back pressure 9Metering end position Injection start position 11Holding pressure transfer position 1Metering torque 1Holding pressure transfer speed 14Mold close time 1Mold open time 16Clamping force 1Shift stroke(havc) 1End speed(havc). Maintenance monitor based on molding condition Controller Monitor Others Multi-touch Panel 1 TFT Color LCD Controller Multi-language Select(English, Chinese, Japanese) 00 Mold Conditions Storage(Internal Memory) Soft Start Molding Self Diagnostics Function I/O Customize Function Molding Operation Assist Function Help Function Pop-up Display Manual Browsing Function Start-up Safety Notice Molding Condition MEMO Screen Caputure Files can be stored to USB memory device USB Printer Port Overall Setting Screen Pre-heat Timer Product Takeout Robot Circuit Attended/Unattended Operation Select Actual Value Display Injection/Metering Waveform Monitor Injection/Metering Waveform Storage Osilloscope Waveform Monitor Energy Consumption and Regeneration Monitor Barrel Temperature Monitor Injection Pressure Monitor(IPM) Statistical Graph Production Monitor Cumlative Operating Hour Display Cycle Monitor Molding Condition Upper/Lower Limit Monitor Inspection and Maintenance Guide Heater System Alarm Injection Pressure Overshoot Alarm Servo Fault Alarm Grease Lubrication Alarm Fault Alarm Buzzer Alarm History Set Value History Safty Compliance to JIMS K01 Cooling Water Closed Circuit for Feed Throat Accessories(Maintenance Tools and s,etc.) (Note ) (Note 4) (Note ) (Note 6) (Note ) Injection unit Clamping unit J0ADS J0ADS JADS J4ADS Long Nozzle Shut-off Nozzles (Pneumatic Type and Hydraulic Type) KC Nozzle M Screw(High Plasticization Type) HP Screw(High Dispersion Type) LSP- screw(abrasion-resistant type) Screws and Barrels for Optical Application Screws and Barrels for Super Engineered Plastics Application Special Screw Barrel Insulation Cover (Note 1) (Note ) Multi-language Select(1 Language Additional) Centralized Control System NET0 Mold temperature display(with Mold Temperature Upper/Lower Limit Alarm) Mold Temperature Control device(with Mold Temperature Upper/Lower Limit Alarm) Hot Ranner Control Circuit Cooling Water Manifolds on Bed,60C-deg. Cooling Water Failure Warning Leveling Pad for Installation Machine Anchoring Device Signal Tower(1Color, Colors) Barrel Blower Cooling Unit Hopper Export Specification Designated Color(Bed & Covers only) (Note ) (Note 6) Hopper Slide Device (Operation Side) High-speed Injection Extended Holding Time Spec. Daylight Extension Mold Platen Heat Insulation Bord ( or mm) Locating Rings Air Jet Core Pull Devices(Pneumatic Type and Hydraulic Type) Valve Gate Device(Pneumatic Type and Hydraulic Type) Coupler joint (Hydraulic, Pneumatic) Hydraulic Power Pack (40L or 60L)Internal Unit Ejector Gate Cutting Circuit Unscrewing Motor Circuit Product Drop Detector(Photoelectric) Chute Rejecting Product Detecting Chute T-groove Platen Mold Setup Device (Note ) (Note 4) (Note) 1. Pneumatic shut-off nozzle and hydraulic shut-off nozzle can be mounted, Addtional hydraulic unit is reguired for hydraulic type.. Contact sales to know the application.. The motor is prevented from being overloaded in a long holding time and high holding pressure molding condition. 4. Extention nozzle is reguired. Ask sales to confirm the nozzle length to meet requirement. Note that the usable mold thickness range will change.. Ask sales to confirm the details depending upon the final destination. 6. Color sample or Muncell code is required. Mold Clamper Device(Pneumatic Type, Hydraulic Type, Magnet Type) (Note 4) Mold Clamper Utilities Total Power Capacity Machine 00H 90H 90H 90H 1H 90H 1H 00H Total Power Capacity(kVA) Standard Injection High Speed Injection Not Applicable 1. Total power capacity does not include external outlets.. We recommend that the rated interrupting current of the main power supply breaker is more than ka at ACV/460V. Electrical instrumentation and control Other Cooling Water Capacity for Barrel Temperature Control Machine 00H 90H 1H 00H Cooling Water Capacity for Barrel Temperature Control(ft /h) 14.1 (0.4m /h) 1.0 (0.6m /h) 4. (1.m /h) The above figures do not include the required quantity of water for the mold temperature controller.
Electric Servo Drive Injection Molding Machine
Division Head Quarter: JSW Plastics Machinery Inc. Head Office: Chicago Office: Detroit Office: JSW Plastics Machinery (S) Pte Ltd Head Office: Philippine Office: Indonesia Office: URL http://www.jsw.co.jp/
More informationAll Electric Servo Drive Vertical Type Injection Molding Machine. Specifications. (in U.S. Unit)
All Electric Servo Drive Vertical Type Injection Moldg Mache Specifications ( U.S. Unit) JT-AD SERIES Equipment Dimensions Rotary type Equipment dimensions Rotary type Mold related dimensions Through hole
More informationElectric Servo Drive Injection Molding Machine
Electric Servo Drive Injection ing Machine Large Electric Servo Drive Injection ing Machines Promotes Faster Cycles, Energy Sa vings, and High Performance An industry pioneer, JSW has extensive experience
More informationSpecifications / International kN
ZHAFIR PLASTICS MACHINERY GMBH Jubatus-Allee 8-10 92263 Ebermannsdorf Germany Tel. +49-9438-9412-0 Fax. +49-9438-9412- E-Mail: contact@zhafir.com www.zhafir.com Zhafir Zeres Series NINGBO ZHAFIR PLASTICS
More informationZhafir Venus Series. Specifications / International. Zhafir Venus. Series kN
Zhafir Venus Series Zhafir Venus Series Specifications / International 4-8000kN ZHAFIR PLASTICS MACHINERY Jubatus-Allee 8-10 92263 Ebermannsdorf Germany Tel. +49-9438-9412-0 Fax. +49-9438-9412- E-Mail:
More informationZhafir VenusⅡ/p Series
Zhafir VenusⅡ/p Series Zhafir Venus Series Packaging / International 10-3800kN ZHAFIR PLASTICS MACHINERY GMBH Jubatus-Allee 8-10 963 Ebermannsdorf Germany Tel. +49-9438-9412-0 Fax. +49-9438-9412-1 E-Mail:
More informationwww.woojinplaimm.com TN-E series TN280E IH IH Injection Unit crew & barrel type A A B C crew diameter inch 1. 1.26 1.2 1.7 1.77 1.97 Injection pressure psi 17.60 870.2 8217.8 091.16 2. 288.6 Theoretical
More informationwww.woojinplai.com pecification TN 20E IE IE Injection Unit crew & Barrel Type A A B crew Diameter 28 2 6 0 Injection Pressure kg/cm 2 626 00 2687 2172 1719 Mpa.6. 26. 21.0 168.6 Holding Pressure kg/cm
More informationToggle and Electric Type Injection Molding Machine. series. High Speed. High Precision. Energy Saving
TE Toggle and Electric Type Injection Molding Machine series High Speed High Precision Energy Saving Machine series TB Hydraulic TH Hydraulic TN Hydraulic & All electric TE All electric VH Vertical hydraulic
More informationToggle and Electric Type Injection Molding Machine. series. High Speed. High Precision. Energy Saving
TE Toggle and Electric Type Injection Molding Machine series High Speed High Precision Energy Saving Machine series TB series 90-880 TH-S(D&B) series -4 TH-PET(D&B) series 3 TH-SMC series 220-4 DL-S series
More informationHaitian Jupiter JU/j Series
HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD ai Fong N.T haitian@mail.haitian.com www.haitian.com NINGBO HAITIAN HUAYUAN MACHINERY CO., LTD. Export Processing
More informationSub title. PR series (Toggle type) Servo Hybrid system
Sub title PR series (Toggle type) Servo Hybrid system PR Series Feature Improved reproducibility and handling by excellent position sensor of mold close/open Outstanding injection molding for thin and
More informationAll Electric Servo Drive Injection Molding Machine
Shanghai Hanau(Germany) Hong Kong Lyon Barcelona Shenzhen Hanoi Bangkok Gurgaon Singapore Jakara Seoul Tokyo Headquarer Taipei Tainan Manila Los Angels Overseas Office Agen Chicago Deroi Sao Paulo All
More informationMAGNA T SERVO. 500 to 5,500 kn
MAGNA T SERVO 500 to 5,500 kn A NEW STANDARD IN TOGGLE TECHNOLOGY Energy Efficient, Rugged & Reliable, Precise & Consistent, Versatile & User Friendly MAGNA T SERVO TOGGLE INJECTION MOLDING MACHINE Durable
More informationDLseries. Compact Design. High Plasticizing Capacity. High Precision. Two Platen Direct Locking Type Injection Molding Machine
Two Platen Direct Locking Type Injection Molding Machine DLseries Compact Design High Plasticizing Capacity High Precision Machine series TB Hydraulic TH Hydraulic TN Hydraulic & ll electric TE ll electric
More informationYASKAWA AC DRIVES. Application Solution. Injection Molding Machine. YASKAWA AC Drive GA700. YASKAWA Matrix Converter U1000
YASKAWA AC DRIVES Application Solution Injection Molding Machine YASKAWA AC Drive YASKAWA Matrix Converter For Injection Molding Machine YASKAWA provides the answers to your injection molding machine needs.
More informationHaitian JupiterⅡ Series
Haitian JupiterⅡ Series HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 level 11 Metroplaza Tower 3 Hing fong RD Kwai Fong N.T haitian@mail.haitian.com www.haitian.com NINGBO HAITIAN HUAYUAN MACHINERY
More information- Injection rate cm 3 /s Max. injection speed mm /s Max. injection pressure MPa Max. injection holding pressu MPa - -
1807731102 Other Screw diameter 68 75 83 83 90 100 100 110 Injection stroke 306 375 420 450 500 Theoretical injection capacity cm 3 1111 1656 2028 2272 2863 3534 3927 4752 Injection unit K600D L750D 2
More informationVertical Type Injection Molding Machine. series. Insert Molding. Automation Optimization. Minimize the spaced required for installation
VH Vertical Type Injection Molding Machine series Insert Molding Automation Optimization Minimize the spaced required for installation Machine series TB series 90-880 TH-S(D&B) series 50-450 TH-PET(D&B)
More information50-200Tons. Second Generation All-Electric injection molding machine. Victor Taichung - an established ISO-9001 & company
50-200Tons Second Generation All-Electric injection molding machine Victor Taichung - an established ISO-9001 & 01 company 50-200Tons Second Generation All-Electric injection molding machine New Centrally
More informationHaitian Saturn Series
PLASTICS MACHINERY Haitian Saturn Series HT 07001_GB Haitian International Co., Ltd Unit 1105 Metroplaza tower 2, 223 Hing Fong Road Kwai Fong N. T haitian@mail.haitian.com Haitian Partner: NINGBO HAITIAN
More information80 ~ 350 Tons LGH-D Series
0 ~ 0 Tons LGH-D Series Featuring another technical innovation by LS The LGH-D Series, designed with LS s high technology, meets the demand for precision molding. Improved rigidity of the platen provides
More informationInjection Mould Machine
Injection Mould Machine PanAsia Exports (HK) Limited Room 1208-1209, B Block, Feng Xing Plaza, No. 242 Tian He Road, Tian He District, Guangzhou, 510620, China Tel: (8620) 28383510 Fax: (8620)28383516
More information36 / 72.5kV Dry Air Insulated Dead Tank Vacuum Circuit Breaker
36 / 72.5kV Dry Air Insulated Dead Tank Vacuum Circuit Breaker 1 Features The Dry Air Insulated Dead Tank VCB was born of superb technology and abundant production experience of Meidensha Corporation.
More informationHaitian Partner: HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower Hing Fong RD Kwai Fong N.T
HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD Kwai Fong N.T haitian@mail.haitian.com www.haitian.com Haitian Partner: HT 20100805-EV NINGBO HAITIAN HUAYUAN
More informationThe ROBUST Performer
80 to 910 Ton The ROBUST Performer Energy Efficient Generous Specifications Robust & Reliable User Friendly Control The ROBUST Performer 3 Large Ram Diameter Provides Uniform Force Distribution across
More informationHaitian Jupiter JU/j Series Specifications
Specifications HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD ai Fong N.T haitian@mail.haitian.com www.haitian.com NINGBO HAITIAN HUAYUAN MACHINERY CO., LTD.
More information4,500-33,000 kn. Zhafir Jenius Series. ZHAFIR PLASTICS MACHINERY Jubatus-Allee Ebermannsdorf Germany
ZHAFIR PLASTICS MACHINERY Jubatus-Allee 8 92263 Ebermannsdorf Germany contact@zhafir.com Zhafir Jenius Series Ningbo Zhafir Plastics Machinery Co.,Ltd Address: No.98, Guanhai Road, Chunxiao Town, Beilun
More informationEngel Injection Molding Machine VERTICAL CLAMP INSERT 330V/90 WP US. Data Sheet INSERT 330V/90 WP US - VERTICAL CLAMP / VERTICAL INJECTION
Engel Injection Molding Machine INSERT 330V/90 WP US - VERTICAL CLAMP / VERTICAL INJECTION CLAMP Clamp force US tons 90 Clamp opening force US tons 3.0 Clamp stroke (max.) inches 13.78 Mold height (min
More informationU.S.A. Specifications - Catalog #ECSX 3-15
TOSHIBA MACHINE U.S.A. Specifications - Catalog #ECSX 3-15 SPECIFICATIONS This may look like one machine......but it is so versatile, with a greater range of shot sizes, you ll think it was triplets. It
More informationR - Series Tons
R VictorTaichung R - Series -1300 Tons Hybrid High-Performance Medium tonnage plastic injection molding machine to satisfy your energy saving and repeatability requirement. Victor Taichung - an established
More informationPLASTICS INJECTION MOLDING MACHINE
PLASTICS INJECTION MOLDING MACHINE MODEL VT - 60 VT - 80 VT - VT - 140 VT - 200 UNIT A B C A B C A B C A B C Screw Diameter 30 30 27 35 35 32 45 45 40 50 50 45 55 Screw L / D Ratio 18:01 18:01 20:01 18:01
More informationBACK TO WEBSITE. SES and SE-HY Series
BACK TO WEBSITE SES and SE-HY Series S UMITOMO Mid-Size All-Electrics and Hybrids Recognized worldwide for electric injection molding machinery technology, Sumitomo sets the standard in precision, energy-efficient,
More informationseries Multi-purpose Intelligent Robot Simple and Compact Mechanical Unit Intelligence and Networking Application system FEATURES
Multi-purpose Intelligent Robot series FEATURES The FANUC robot i is the intelligent robot for versatile applications with the up to date expertise at FANUC in last quarter century. The highly reliable
More information45mm. Electric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 35 Supply
330 S P E C I F I C A T I O N S 45mm English Metric Injection Unit Specifications A' A B A' A B Inj. Capacity, Max. GPPS oz 8 11 13 gm 226 312 368 Theoretical Disp in^3 15.3 19.4 24.0 cm^3 251 318 393
More informationVertical Type Electric Servo Drive Injection Molding Machine
Vertical Type Electric Servo Drive Injection Molding Machine Harmonizing Ecology and Technology JSW Builds The Most Advanced Vertical Type Electric Servo Drive Injection Molding Machine Friendly to Earth
More informationBT SERIES www.borchenorthamerica.com TABLE OF CONTENTS BT SERIES ENERGY EFFICIENT. DURABLE. PRECISE. COST EFFECTIVE COMPANY BACKGROUND...5 CUSTOMER SERVICE...6 FEATURES...8 MAJOR HYDRAULIC/ELECTRIC COMPONENTS...9
More informationKR15. LM Guide Miniature Actuator. KR Series Actuators with Integrated LM Guide and Ball Screw in a Compact Stainless Steel Body. CATALOG No.
LM Guide Miniature Actuator KR1 KR Series Actuators with Integrated LM Guide and Ball Screw in a Compact Stainless Steel Body US, EPC Patent pending CATALOG No.76E LM Guide Actuator KR1 Miniature LM Guide
More informationYASKAWA AC DRIVES. Application Solution. Extruder. YASKAWA AC Drive GA700. YASKAWA Matrix Converter U1000
YASKAWA AC DRIVES Application Solution Extruder YASKAWA AC Drive YASKAWA Matrix Converter For Extruder YASKAWA provides the answers to your extruder needs. YASKAWA ELECTRIC always stands in the shoes of
More informationSpherical Roller Bearings
Spherical Roller Bearings Introducing the newest series of advanced, high performing spherical roller bearings offering higher speed and load capacities suitable for a wide variety of industrial applications.
More informationSpecifications KN
Specifications 860-00 HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD ai Fong N.T haitian@mail.haitian.com www.haitian.com Haitian Partner: HT 20170419-IV
More informationReliable Hi-Quality Overload Protector
Reliable Hi-Quality Overload Protector The Sankyo torque limiter is a safety device designed to protect mechanical equipment from overloads. When an excessive torque load occurs, the torque limiter trips
More informationSLN08 B-01. DC Solenoids
ELECT R O N IC COMPO NENTS SLN08 B-01 DC Solenoids Contents & Features Index & DC Solenoids Features... 1 Solenoid Specifications... 2 Product List... 3 How to Select Solenoids... 4-5 DC Solenoids (PM
More information72/96/130-70mm. Electric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 91 Supply
935 S P E C I F I C A T I O N S 72/96/130-70mm English Metric Injection Unit Specifications A B C A B C Injection Capacity, Max. GPPS oz 72 96 130 gm 2,041 2,722 3,686 Theoretical Disp in^3 134.1 178.6
More informationCreative Engineering
Creative Engineering Agenda Who we are Industries we serve Suppliers we have Products we offer Who we are Creative Engineering is established to provide innovative solutions to industrial customers. OUR
More informationCircular & Rectangular Multi-Pole Connectors MPC06
Circular & Rectangular Multi-Pole Connectors MPC06 Contents Contents... Multi-Pole Circular Connectors Specifications Table... Product Lineup... P Quick Locking Type... - 7 0P Quick Locking Type... - 0
More informationD6..M.. Butterfly Valves
D6..M.. Butterfly Valves Technical Databook Ver. Version 2 2.0 Belimo Asia Pacific D6..MH/MW Series Butterfly Valves Trade Selection by Belimo 2-way Butterfly Valves flanged DN50...500 For Open/Close or
More informationHaitian MarsⅡSeries. Specifications / International KN. Haitian Mars. Series
Haitian MarsⅡSeries HITIN INTERNTIONL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD Kwai Fong N.T haitian@mail.haitian.com www.haitian.com NINGBO HITIN HUYUN MCHINERY CO., LTD.
More informationTsubaki Power and Performance. For the Medical Equipment Industry
Tsubaki Power and Performance For the Medical Equipment Industry A wide range of Tsubaki products support the needs of the medical industry. Meeting customers' needs for quality and functionality and contributing
More informationSC05 E-04. AC Inlets Power Supply Connectors
ELECT R O N I C COMPONENTS SC0 E-0 AC Inlets Power Supply Connectors Contents Contents... AC Inlets AC Inlets... AC Inlets (for Lead Wire)... Power Supply Connectors Low-Profile Type Poles... 6 Poles...
More informationETS/ETV/ECS/ECV FP1 Series
Products for Food Manufacturing Processes FP Series Electric Actuator ETS/ETV/ECS/ECV FP1 Series FP1 Series Lubricants Food-grade (NSF H1) lubricants are used on flow passages and sliding portions. Stainless
More informationID-HM Series Minimum Space Less Hydraulic Oil Precise Molding
ID-HM Series Minimum Space Less Hydraulic Oil Precise Molding ID-HM Series ID-HM Series (Hydro-Mechanical Type) Hydro-mechanical injection molding machines provide FLEXIILITY, HIGH PRODUCTIVITY, and LOW
More informationElectric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 88 Supply
750 S P E C I F I C A T I O N S 72/96/130-70mm English Metric Injection Unit Specifications A B C A B C Injection Capacity, Max. GPPS oz 72 96 130 gm 2,041 2,722 3,686 Theoretical Disp in^3 134.1 178.6
More informationBearings for the Cement and Ready-Mix Concrete Industries
Bearings for the Cement and Ready-Mix Concrete Industries Market leading NSK technology that increases bearing life and reduces maintenance costs and downtime. Upgrading to NSK takes your operation to
More information30/40/55-70mm. Max. Total Capacity kva 83(25:1 L/D) or 93 (30:1 L/D) Machine Supply Transformer Size kva 93 Capacity Machine Requirements
440 S P E C I F I C A T I O N S 30/40/55-70mm English Metric Injection Unit Specifications A B C A B C Injection Capacity, Max. GPPS oz 30 40 55 gm 850 1,134 1,559 Theoretical Disp in^3 55.8 74.5 99.2
More informationOSCILLATING HANDLER PARTS HANDLER
OSCILLATING HANDLERPARTS HANDLER Reliable Cam System Solutions The oscillating parts handler,offers a two-dimensional movement of rotation and lift. SANKYO's oscillating handler features a solid cam mechanism
More informationSpecifications for Europe
~Reliable Sales and Service Nework~ Elecric Servo Drive Shanghai Hong Kong Shenzhen Hanoi Bangkok Gurgaon Kuala Lumpur Singapore Jakara Tokyo Headquarer Taipei Tainan Manila Ho Chi Minh Los Angels Chicago
More informationHigh Accuracy Wire Electrical Discharge Machines
Equipment and Construction Work for Machine Installation 1. Floor area and foundation work 4. Electrical work W32FB W53FB 2. Factory air-conditioning equipment Recommended optimal temperature 20 1 Heat
More informationZF Group Facts & Data Sales million 12,907 Capital expenditure million 582 Employees 64,600
Ref : P001/ZF/SG/2011 ZF Group ZF is a Worldwide Leading Automotive Supplier of Driveline and Chassis Technology We develop and manufacture innovative, high-quality products and related technol ogies that
More informationSteam Valves with Rotary Actuators
Steam Valves with Rotary Actuators Technical Databook Version 3.1 Belimo Asia Pacific Steam Valve Product overview 2-way Steam Valves DN15...80 Equal-percentage characteristics for modulating control of
More informationLinerUnit. CS series. For Long Stroke Applications High-speed, High-power, New-Technology Linear Unit. Long Stroke Linear Drive Unit
LinerUnit CS series Received the 26th Award for Excellence in The Best New Technology and Products Award for Small and Medium Enterprises. Long Stroke Linear Drive Unit LinerUnit CS series Japanese patent
More informationPARALLEL PROCESSING UPS E33A
PARALLEL PROCESSING UPS E33A Low energy, high quality, high reliability parallel processing type UPS E33A Supporting network PARALLEL PROCESSING UPS Parallel operation backup time Input AC380, 400, 415,
More informationMedium Size Die Casting Machine
Medium Size Die Casting Machine UBE GLOBAL NETWORK With Japan as our headquarters, we contribute to our customers' globalization with a four-forked system covering Asia, North America and Europe. UBE Machinery
More informationRollerDrive CNC RCC CNC ROTARY TABLE. RollerDrive CNCTM. RCC series. 90-degree index in 0.4 seconds
RollerDrive N R N ROTARY TABLE RollerDrive NTM R series 9-degree index in. seconds arc sec Million Million Million Million 5 Million The RollerDrive graph is based on internal testing.(enter distance of
More informationEASY TO USE POWERFUL & FLEXIBLE
EASY TO USE POWERFUL & FLEXIBLE ENERGY SAVING DCC130- Cold Chamber Die Casting Machine LK Website:www.lktechnology.com COLD CHAMBER DIE CASTING MACHINE Hydraulic Driven Die Height Adjustment Clamping State
More informationInductive Proximity Sensor
Inductive Proximity Sensor Square Proximity Sensor Limit switch styled housing models easy to install. Standard CENELEC models and miniature types. Terminal housing, M12 Plug--in connection and cable types.
More informationMOTOMAN-EPH and EP Series
Robot Optimized for Press Handling MOTOMAN-EPH and EP Series Certified for ISO91 and ISO141 QMS Accreditation R9 JQA-813 JQA-EM924 Pursuing of High-Effecient Handling between Presses Robot Optimized for
More informationVolute pumps. SJ-e. 50Hz
Volute pumps SJ-e 50Hz Volute pumps Cast-iron 2-Pole, direct driven type SJ-e Applications General water supply in buildings and apartments, etc Hot and cold water circulation Supply of industrial water
More information24kV/36kV Metal-Enclosed SF6 Gas Insulated Switchgear HICLAD 20GB/HICLAD 30GB
24kV/36kV Metal-Enclosed SF6 Gas Insulated Switchgear HICLAD 20GB/HICLAD 30GB Compact, reliable, and economic for medium-voltage applications Design Concept This switchgear conforms to IEC62271-200, and
More informationSpecifications. ~Reliable Sales and Service Network~ Shanghai Hong Kong Shenzhen Hanoi Bangkok Gurgaon. Detroit. Chicago
~Reliable Sales and Service Nework~ Elecric Servo Drive Shanghai Hong Kong Shenzhen Hanoi Bangkok Gurgaon Kuala Lumpur Singapore Jakara Tokyo Headquarer Taipei Tainan Manila Ho Chi Minh Los Angels Chicago
More informationCRES. RoD Actuator. Low-cost and handy actuator Dustproof and waterproof design compliant with IP55 standard Compliant with the RoHS Directives
CRES07_3.3_OCF 13.4.19 11:33 ページ 2 www.thk.ru BERG AB тел. (495) 727-22-72 thk-mail@ya.ru RoD Actuator CRES Low-cost and handy actuator Dustproof and waterproof design compliant with IP55 standard Compliant
More information4mm(H)x8mm(W) Micro LM Guides
4mm(H)x8mm(W) Micro LM Guides US, EPC, Patent Pending CATALOG No.293E Micro LM Guides RSR3M/3N The micro size allows space-saving design. Can be used in various fields of industry including micro machines
More informationV-LINE creates the value of the next generation. Horizontal Injection Molding Machine Horizontal Injection Molding Machine vol.3. Create your future
Create your future Horizontal Injection Molding Machine Horizontal Injection Molding Machine vol.3 V-LINE creates the value of the next generation V-LINE is a registered trademark of Sodick Co., Ltd. V-LINE
More informationMacau Visitor Arrivals. Visitors Inflow ( YTD)
Macau Visitor Arrivals Macau Inflow 21 YOY Change 211 YOY Change 212 YOY Change Jan 2,46,556 6.8% 2,76,64 1.4% 2,461,64 18.6% Feb 2,57,566 24.4% 2,164,249 5.2% 2,13,977 1.5% Mar 2,11,99 6.7% 2,19,865 8.9%
More informationLiebert NX - Next Generation UPS for protecting your Business Critical Systems. AC Power Systems for Business-Critical Continuity
- Next Generation UPS for protecting your Business Critical Systems AC Power Systems for Business-Critical Continuity Next Generation UPS for new levels of modern equipment protection Today s advanced
More informationTSUBAKI s Miter Gear Box plays important roles around the world
Miter Gear Box TSUBAKI s Miter Gear Box plays important roles around the world TSUBAKI s Miter Gear Box has been used for a wide range of applications and in various specifications since it was launched
More informationApplications. Features: Basic Configuration
Meiden Chassis Dynamometer Systems assure high accuracy and high reliability. Meidensha s chassis dynamometer provides customer high accurate and high reliable test environment for vehicle. It has been
More informationRollerDrive. Ultra small, zero backlash reducer. RollerDrive. MR series
RollerDrive MR Ultra small, zero backlash reducer RollerDrive MR series The ZERO-Backlash Technology Superior movement achieved with zero-backlash technology Theory of Operation Roller gear mechanism Output
More informationThe multi-function machine
The multi-function machine Technical Description Multi Clamping unit asic hydraulic 500 kn 800 kn 1100 kn 18,5 kw 22 kw 30 kw Injection unit/ Distance Screw between tie bars V V V 370 x 370 120 200 22/25/30
More informationExtended Line-up. CAM CLUTCH BR-HT SERIES One-Way clutch
Extended Line-up CAM CLUTCH BR-HT SERIES One-Way clutch Ideal integral backstop The BR-HT series Torque Limiter model is a combination of a centrifugal lift-off cam clutch and a torque limiter function
More informationZhafir Zeres Series ,500 kn
Zhafir Zeres Series 400-6,500 kn We extend electrical options ZHAFIR ZERES SERIES Zhafir has developed a new electric injection molding machine series, the Zhafir Zeres Series, a tremendously flexible
More informationSE-DUZ Direct-Drive All-Electric Series
SE-DUZ Direct-Drive All-Electric Series SE-DUZ Series Direct-Drive All-Electrics Low-inertia, high-performance direct-drive motors for plasticizing, injection, clamping and ejection New PC-based control
More informationNidec and Fuji Electric sign a Memorandum of Understanding to create a Joint Venture for Industrial Compact Motors
Nidec and Fuji Electric sign a Memorandum of Understanding to create a Joint Venture for Industrial Compact Motors Nidec Corporation ( Nidec, NYSE: NJ), together with Fuji Electric Holdings ( FHC, Tokyo
More informationNSK Ball Screws. Compact FA Series. Compact ball screws offer quiet, high-speed operating performance. Two-week delivery is available on common sizes.
NSK Ball Screws Compact ball screws offer quiet, high-speed operating performance. Two-week delivery is available on common sizes. Compact ball screws offer quiet, high-speed performance. ball screws incorporate
More informationTechnical Specifications
All-Electric 55 Frame 21/24/29/34 oz Injection Unit Specifications A B C A B C Injection Capacity, Max GPPS* oz 21 29 34 gm 595 822 963 Theoretical Disp in^3 37.7 52.6 61.1 cm^3 618 862 1,001 Max Pressure
More informationIFC07 E-03. USB Connectors HDMI Connectors DisplayPort Connectors
ELEC T R ONIC COMPONEN T S IFC07 E-03 USB Connectors HDMI Connectors DisplayPort Connectors Contents Contents 1 USB3.0 Connectors Plug Cables 2 USB Connectors Mini-B Receptacles 3 Plugs 4-5 HDMI Connectors
More informationGuide Ball Bushing NEW
NEW Guide Ball Bushing Contributes to compact the system Achieves load rating more than twice the Linear Bushing with the same dimensions (model LG-S) Various combinations of nut and shaft are available
More informationYou ll find many Tsubaki products being
You ll find many Tsubaki products being There are many processes involved in making a motor vehicle. You ll find Tsubaki products in all of these processes, from conveying vehicle bodies from the stockyard,
More informationTechnical Data Concept and System 25/280
Technical Data Concept and System 25/ Demag Plastics Group Concept and System 25/ Model description 25/-35 25/-80 25/-120 International size description 250-35 250-80 250-120 Clamping unit 25/ Clamping
More informationZF Asia Pacific - Your Ideal Service Partner
INDONESIA (Indonesia Representative Office) MNC Tower (Menara Kebon Sirih), 21st Floor, Suite 2107, Jalan Kebon Sirih 17-19, Jakarta 10340 Indonesia Tel: +62 21 3983 6924 Fax: +62 21 3983 6926 Email: info.zf-services.id@zf.com
More informationHORIBA Jobin Yvon GmbH HORIBA Vietnam Company Limite ted Hea d Offi ce HORIBA ITALIA Srl Mil ano Office HORIBA Korea Ltd. Seoul Branch HORIBA Instruments Inc. Edison office HORIBA FRANCE SAS HORIBA India
More informationTotal efficiency 26.7% ( ) Required power. Power consumption Pressure (MPa) , , ,000. Power (W) 100,000 80,000 60,000
Power Motor efficiency (%) 100 Theoretical maximum operating efficiency 80 60 40 20 Power which can be saved by inverter control +energy saving control 0 20 Power which can be saved by inverter control
More informationEnergy Saving Hydraulic PLAIMM TB series
TB eries Energy aving Hydraulic PLAIMM TB series Back to the Basic 2 Woojin Plaimm TB serise 3 Energy aving Hydraulic PLAIMM TB series TB series is the newly launched energy saving hydraulic type injection
More informationALLROUNDER 570 S. Distance between tie bars: x (570 x 570 mm) Clamping force: 176, 220, 242 tons Injection unit: 8.2 oz, 15.3 oz, 29.
Facts and figures ALLROUNDER 57 S Distance between tie bars: 22. x 22. (57 x 57 mm) Clamping force: 176, 22, 22 tons Injection unit: 8.2 oz, 15.3 oz, 29.1 oz www.arburg.com 57 S Machine dimensions 78.7
More informationSE-EV Advanced All-Electric Series
SE-EV Advanced All-Electric Series SE-EV Series Advanced All-Electrics Model sizes: 56, 84, 112, 146 and 202 U.S. tons New NC-10 control with Z-molding capabilities plus improved ease-of-use, processing
More informationHigh efficiency third generation screw airend Efficiency comparison chart of screw airend rotor by generations
High efficiency third generation screw airend Efficiency comparison chart of screw airend rotor by generations Energy saving modulation control 0~100% Power consumption (%) First generation Second generation
More informationALLROUNDER 270 S. Distance between tie bars: x (270 x 270 mm) Clamping force: 28, 38, 44 tons Injection unit: 1.4 oz, 2.3 oz, 3.
Facts and figures ALLROUNDER 27 S Distance between tie bars: 1.63 x 1.63 (27 x 27 mm) Clamping force: 28, 38, 44 tons Injection unit: 1.4 oz, 2.3 oz, 3.7 oz www.arburg.com 27 S Machine dimensions 78.35
More informationCircuit Protectors TBC05 E-03
Circuit Protectors TBC05 E-03 Contents Contents 1 Notice 1 Specifications ist 2 Example of Used 3 TBC5000 Series Manual Reset Type and Auto Reset Type 4 12 TBC6000 Series Manual Reset Type 13 17 Notice
More informationECSXII. Smart Electric Molding Solutions. Reach for the impossible. Achieve the incredible. Watch the ECSXII video.
TOSHIBA MACHINE ECSXII Smart Electric Molding Solutions. www.toshiba-machine.com Watch the ECSXII video. u Reach for the impossible. Achieve the incredible. U.S.A. Specifications - Catalog #ECSXII 7-17
More informationSpritzgiessautomaten. Innovative into the future. Data and Equipment
Spritzgiessautomaten Innovative into the future Data and Equipment Compact range BOY has become the specialist in the manufacturing of injection moulding machines with clamping forces up to 1,000 kn. BOY
More information