All Electric Servo Drive Vertical Type Injection Molding Machine. Specifications. (in U.S. Unit)

Size: px

Start display at page:

Download "All Electric Servo Drive Vertical Type Injection Molding Machine. Specifications. (in U.S. Unit)"

Maurice Ramsey
6 years ago
Views:

1 All Electric Servo Drive Vertical Type Injection Moldg Mache Specifications ( U.S. Unit)

2 JT-AD SERIES Equipment Dimensions Rotary type Equipment dimensions Rotary type Mold related dimensions Through hole for ejector rod U dia. Sgle actg type Equipment dimensions Sgle actg type Mold related dimensions Through hole for ejector rod AE dia. Upper movable platen Mold Related Dimensions Rotary type Sgle actg type

3 Equipment Dimensions Rotary type Sgle actg type Weight All Electric Servo Drive Vertical Type Injection Moldg Mache HR Low-ertia (option) HS High-speed (option) Weight

4 Rotary Type Performance Table Unit Item Model Unit Screw barrel type Screw diameter Screw stroke Theoretical jection capacity Injection capacity (GP-PS) 3 oz Standard Holdg pressure (Max.) Plasticizg rate (GP-PS) /s 3 /s Injection Unit Low-ertia (HR) Option Holdg pressure (Max.) Plasticizg rate (GP-PS) /s 3 /s High-speed (HS) Option Holdg pressure (Max.) Plasticizg rate (GP-PS) /s 3 /s Nozzle touch force Nozzle stroke from platen Type of nozzle Barrel temperature control Heater wattage Mechanism kw Clampg force Daylight openg (Max.) Openg stroke (Max.) Clampg Unit Mold height Mold size (Max.) Lower mold weight (Max.) Table outside diameter lb mm Ejector pot Ejector force Ejector stroke Miscellaneous Mache weight Mache weight (HS) Mache dimensions (LWH) Mache dimensions (HS)(LWH) Table height Remarks: 1. Maximum jection pressure and maximum holdg pressure may be restricted due to moldg condition. 2. The theoretical jection capacity is (cross sectional area of barrel) (stroke of screw). 3. The jection capacity is applicable for GP-PS and variable accordg to the grade of res, moldg conditions and mold. 4. The plasticizg rate is applicable for GP-PS. 5. PC, HPVC, other engeerg plastic, etc., low temperature settg and high speed moldg may require a high torque dependg on the grade or moldg conditions. Please contact us if you plan. Note: 1. Due to contual improvements, specifications are subject to change without notice. 2. Actual figures of the specification will vary dependg on fal mache configuration. Please contact us if you require more specific data. 3. Performance specifications are based on theoretical data. 4. Low ertia jection specifications and high-speed jection specifications can be handled as option. 5. Screw barrel type B is optional.

6 Rotary Type Performance Table Unit Item Model Unit Screw barrel type Screw diameter Screw stroke Theoretical jection capacity 3 Injection capacity (GP-PS) Holdg pressure (Max.) Plasticizg rate (GP-PS) Standard oz /s 3 /s Injection Unit Low-ertia (HR) Option High-speed (HS) Option Holdg pressure (Max.) Plasticizg rate (GP-PS) Holdg pressure (Max.) Plasticizg rate (GP-PS) /s 3 /s /s 3 /s Nozzle touch force Nozzle stroke from platen Type of nozzle Barrel temperature control Heater wattage Mechanism kw Clampg force Daylight openg (Max.) Openg stroke (Max.) Clampg Unit Mold height Mold size (Max.) Lower mold weight (Max.) Table outside diameter lb mm Ejector pot Ejector force Ejector stroke Miscellaneous Mache weight Mache weight (HS) Mache dimensions (LWH) Mache dimensions (HS) (LWH) Table height Remarks: 1. Maximum jection pressure and maximum holdg pressure may be restricted due to moldg condition. 2. The theoretical jection capacity is (cross sectional area of barrel) (stroke of screw). 3. The jection capacity is applicable for GP-PS and variable accordg to the grade of res, moldg conditions and mold. 4. The plasticizg rate is applicable for GP-PS. 5. PC, HPVC, other engeerg plastic, etc., low temperature settg and high speed moldg may require a high torque dependg on the grade or moldg conditions. Please contact us if you plan. Note: 1. Due to contual improvements, specifications are subject to change without notice. 2. Actual figures of the specification will vary dependg on fal mache configuration. Please contact us if you require more specific data. 3. Performance specifications are based on theoretical data. 4. Low ertia jection specifications and high-speed jection specifications can be handled as option. 5. Screw barrel type B is optional.

7 All Electric Servo Drive Vertical Type Injection Moldg Mache

8 Sgle Actg Type Performance Table Unit Injection Unit Clampg Unit Miscellaneous Item Screw barrel type Screw diameter Screw stroke Theoretical jection capacity Injection capacity (GP-PS) Holdg pressure (Max.) Plasticizg rate (GP-PS) Holdg pressure (Max.) Plasticizg rate (GP-PS) Holdg pressure (Max.) Plasticizg rate (GP-PS) Nozzle touch force Nozzle stroke from platen Type of nozzle Barrel temperature control Heater wattage Mechanism Clampg force Daylight openg (Max.) Openg stroke (Max.) Mold height Distance between tie-bars (DW) Ejector pot Ejector force Ejector stroke Mache weight Mache weight (HS) Mache dimensions (LWH) Standard Low-ertia (HR) Option High-speed (HS) Option Mache dimensions (HS) (LWH) Table height Model Remarks: 1. Maximum jection pressure and maximum holdg pressure may be restricted due to moldg condition. 2. The theoretical jection capacity is (cross sectional area of barrel) (stroke of screw). 3. The jection capacity is applicable for GP-PS and variable accordg to the grade of res, moldg conditions and mold. 4. The plasticizg rate is applicable for GP-PS. 5. PC, HPVC, other engeerg plastic, etc., low temperature settg and high speed moldg may require a high torque dependg on the grade or moldg conditions. Please contact us if you plan. Unit 3 oz /s 3 /s /s 3 /s /s 3 /s kw Note: 1. Due to contual improvements, specifications are subject to change without notice. 2. Actual figures of the specification will vary dependg on fal mache configuration. Please contact us if you require more specific data. 3. Performance specifications are based on theoretical data. 4. Low ertia jection specifications and high-speed jection specifications can be handled as option. 5. Screw barrel type B is optional.

10 List of standard accessories and optional accessories List of standard accessories Injection/plasticizg Clampg KC nozzle (tip type) Item N2000F barrel (corrosion/abrasion resistance type) LSP-2 screw (abrasion resistance type) Note 1 HT screw head Screw suck-back Screw and barrel attachment/detachment device Screw cold start prevention Moldg/Pause temperature select Automatic purgg circuit Nozzle touch force remote settg Nozzle retract select Suck-back select Automatic greasg Injection/Meterg programmed control Note 1 Injection/holdg pressure: 1 to 6 steps (variable) Meterg/back pressure: 1 to 3 steps (variable) Holdg pressure transfer by speed detection (IVS control) Barrel temperature remote settg Barrel temperature control (SSR) So-pack servo control Hopper flange temperature control IWCS control Reverse seal control Holdg pressure control select Synchronous temperature rise control Grease-free toggle bushg Automatic greasg Mold open/close and Mold open/close: 4 steps (fixed) ejection programmed control Ejection: 1 to 3 steps (variable) Electric-driven mold thickness adjustg device Mold thickness remote settg Auto clampg force settg A-mode Toggle type jection B-mode compression function Compression: 1 to 6 steps (variable) Mold protection function Photoelectric safety device (rotary type only) Table speed remote settg (rotary type only) Clampg safety device (electric/double Note 2 mechanical type) Robot mountg holes Item Touch-panel TFT color LCD controller Moldg condition storage (ternal memory: 120 molds) Note 3 Lower two-die moldg condition auto switchg (rotary type only) USB prter port Note 4 Self-diagnosis function Overall settg screen Help function Pre-heat timer Compound action Clock Attended/unattended operation select Multi-language select (English/Chese/Japanese) Barrel temperature monitor Heater system fault Injection pressure monitor (IPM) Injection/meterg waveform monitor Injection/meterg waveform storage Oscilloscope waveform monitor Injection pressure overshoot alarm Statistical graph Measurement value display Mold temperature display Note 5 Grease lubrication fault alarm Fault alarm buzzer Production monitor Cumulative operatg hour display Cycle monitor Moldg condition upper/lower limit monitor Note 6 Inspection and matenance Note 7 Alarm history Set value history Servo fault alarm Coolg water closed circuit Accessories (matenance tools, ejector rods) Note 1: One set of K or A size screws is equipped standard. B size is optional. Note 2: Photoelectric type is used for operation side of rotary type. Note 3: The external memory can store up to 1000 mold conditions. Prepare commercial USB data storage media. Note 4: Prter and prter cable are optional. Note 5: Thermal sensor and electric wirg are not cluded. Note 6: A maximum of 8 items and alarms can be selected out of the followg monitor items. Cycle time Injection time Meterg time Cushion position Holdg pressure end position Injection pressure Holdg pressure transfer pressure Screw back pressure Meterg end position Injection start position Holdg pressure transfer position Mold open time Mold close time Meterg torque Holdg pressure transfer speed Mold ner pressure <option> Note 7: Indicates spection time and items. Controller Monitor Others List of optional accessories Injection Clampg Electric stallation/control Others Item Long nozzle Shut-off nozzle (pneumatic type) Hi-Melta M screw Note 1 Ultra corrosion/abrasion resistance screw barrel Note 2 B size screw barrel Hopper throat abrasion resistance sleeve Barrel sulation cover Hopper Hopper attachment tube Ceramic screw head PCD screw head Module 1 rank down sized barrel Residual res alarm Low ertial jection (HR) High-speed/high-response jection (HS) Vent-type jection device Note 3 Daylight extension Thermal sulation plate for platens Note 4 Air jet Core pull circuit (pneumatic type, hydraulic type) Note 5 Unscrewg motor circuit Die clamper Upper-die ejector (hydraulic type) Note 5 Ejector 3-pot ejection (rotary type only) Ejector stroke extension (rotary type only) Mold temperature control pipg (for high-temperature, rotary type only) Mold setup device (side platen, outside platen) Note 6 Mold one-direction access (270 deg. rotation, rotary type only) Mold clamper Other language select (Hangul/Spanish) Note 7 Simple centralized monitorg system LINK10 Note 8 Centralized management system NET100 Note 9 Heater disconnection alarm Mold temperature display (with mold temperature upper/lower limit alarm) Mold temperature control device (heater type) Prter (with prter cable) Robot terface Coolg water flow dicator Coolg water failure warng Levelg pads for stallation Rotary warng light Export specifications Note 10 Designated color Note 11 Note 1: Applied for screw diameters of 35 mm or more. Note 2: Consult us dividually for specifications. Note 3: Screw diameters of 25 mm or more are compatible. Note 4: If an sulation board is equipped, note that both the nozzle stroke and the range of mold thickness used will be changed. Note 5: Pump unit is separately required for the hydraulic type. Note 6: When side platen access device is equipped, the ejector stroke extension (option) is required. Note 7: Consult us separately for languages other than the above. English and Chese are provided standard. Note 8: LINK10 has measurement value data collection, moldg condition management and remote console functions. Note 9: The NET100 has quality control and production control functions addition to the functions of LINK10. Note10: For export specifications, separate meetgs may be necessary dependg on the destation. Note11: Designated colors, referrg to color samples or Munsell codes.

11 All Electric Servo Drive Vertical Type Injection Moldg Mache Utility Total Power Capacity Rotary type Sgle actg type Note1. Total power capacity is values obtaed by addg the capacity of moldg mache unit to the capacity of mold thermal control/hydraulic unit, wich is optional. Note2. We recommend that the rated terruptg current of the ma power supply breaker is more than 25kA at AC400V/460V. HR... Low-ertia (option) HS... High-speed (option) Capacity of Coolg Water (outle)/ Capacity of Air Rotary type Sgle actg type Note: The above figures do not clude the required quantity of water for the temperature controller.

12 Division Head Quarter: Gate City Ohsaki-West Tower, 11-1, Osaki 1-chome, Shagawa-ku, Tokyo , Japan Phone: Fax: URL JSW Plastics Machery Inc. Head Office: Chicago Office: Detroit Office: 555 South Promenade Ave., Unit 104, Corona, California 92879, U.S.A. Phone: Fax: Capital Drive, Suite 130, Lake Zurich, Illois 60047, U.S.A. Phone: Fax: Cathere Industrial Drive, Unit 118, Novi, Michigan 48375, U.S.A. Phone: Fax: JSW Plastics Machery S Pte Ltd Head Office: Philippe Office: Indonesia Office: 17, Gul Lane, Jurong Town, Sgapore , Republic of Sgapore Phone: Fax: Chemdis Bldg., Don Jesus Blvd., Alabang Hills Village, Muntlupa City, Philippes Phone: Fax: Graha Cevril, JI. Senopati Raya No.6A, Jakarta 12110, Indonesia Phone: Fax: JSW Plastics Machery M SDN. BHD. D6-5-G, (Ground Floor), Block D6, Pusat Perdagangan Dana 1, Jalan Pju 1A/46, 47301, Petalg Jaya, Selangor Darul Ehsan, Malaysia Phone: Fax: JSW Plastics Machery T Co., Ltd. 78/6 JST Buildg 4th Fl., Moo 7 Kg Kaew Road, Rachatewa, Bangplee, Samutprakarn Thailand Phone: Fax: JSW Plastics Machery Vietnam Ltd. Room103, Techno-Center Thang Long Industrial Park Dong Anh District, Hanoi, Viet Nam Phone: Fax: JSW Plastics Machery H.K.Co., Ltd. Room 907, Corporation Park, 11 On Lai Street, Shat N.T., Hong Kong Phone: Fax: JSW Injection Mache Matenance ShenzhenCo., Ltd. 1/F., Block A, Sanhe Industrial Park, Yongx Street, Ygrenshi Village, Shiyan Town, Baoan District, Shenzhen, , People's Republic of Cha Phone: Fax: JSW Plastics Machery Shanghai Corp. 28A, Strength Plaza, No.600-4, Tianshan Road, Shanghai, , People's Republic of Cha Phone: Fax: JSW Plastics Machery TAIWAN Corp. Head Office: Taan Office: URL 1F., No.23, Da Hu 1st Rd., Guishan Shiang Taoyuan, Taiwan, R.O.C. Phone: Fax: F-7, No , Shiau E. Rd., Yungkang City, Taan, Taiwan, R.O.C. Phone: Fax: Prted Japan PL, AB, JC, AJ, A

Electric Servo Drive Injection Molding Machine

Electric Servo Drive Injection Molding Machine Division Head Quarter: JSW Plastics Machinery Inc. Head Office: Chicago Office: Detroit Office: JSW Plastics Machinery (S) Pte Ltd Head Office: Philippine Office: Indonesia Office: URL http://www.jsw.co.jp/